6-K

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 6-K

REPORT OF FOREIGN PRIVATE ISSUER

Pursuant to Rule 13a-16 or 15d-16 of the

Securities Exchange Act of 1934

Dated: February 15, 2022

Commission File Number: 001-13184

TECK RESOURCES LIMITED

(Exact name of registrant as specified in its charter)

Suite 3300 – 550 Burrard Street, Vancouver, British Columbia V6C 0B3

(Address of principal executive offices)

Indicate by check mark whether the registrant files or will file annual reports under cover of Form 20-F or Form 40-F.

Form 20-F        Form 40-F    X   

Indicate by check mark if the registrant is submitting the Form 6-K in paper as permitted by Regulation S-T Rule 101(b)(1):

Note: Regulation S-T Rule 101(b)(1) only permits the submission in paper of a Form 6-K if submitted solely to provide an attached annual report to security holders.

Indicate by check mark if the registrant is submitting the Form 6-K in paper as permitted by Regulation S-T Rule 101(b)(7):       

Note: Regulation S-T Rule 101(b)(7) only permits the submission in paper of a Form 6-K if submitted to furnish a report or other document that the registrant foreign private issuer must furnish and make public under the laws of the jurisdiction in which the registrant is incorporated, domiciled or legally organized (the registrant's "home country"), or under the rules of the home country exchange on which the registrant's securities are traded, as long as the report or other document is not a press release, is not required to be and has not been distributed to the registrant's security holders, and, if discussing a material event, has already been the subject of a Form 6-K submission or other Commission filing on EDGAR.

SIGNATURE

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

	Teck Resources Limited
	(Registrant)
Date: February 15, 2022	By:	/s/ Amanda Robinson
		Amanda Robinson
		Corporate Secretary

EXHIBIT INDEX

Exhibit Number	Description
99.1	Press Release dated February 15, 2022

EX-99.1

EXHIBIT 99.1

 

For Immediate Release 22-13-TR Date: February 15, 2022

Teck to Pilot Electric Transport Truck at
Highland Valley Copper Operations

Vancouver, B.C. - Teck Resources Limited (TSX: TECK.A and TECK.B, NYSE: TECK) ("Teck") and MEDATech today announced the pilot of a fully electric on-highway transport truck to haul copper concentrate, marking the first use of a battery-electric truck to haul copper concentrate worldwide. The truck will travel between Teck’s Highland Valley Copper Operations (HVC) in south-central British Columbia (B.C.) and a rail loading facility in Ashcroft, B.C.

This pilot of the MEDATech ALTDRIVE-powered fifth-wheel Western Star will help to advance Teck’s goal of displacing the equivalent of 1,000 internal combustion (ICE) vehicles by 2025. It will also provide valuable learnings for the electrification of Teck’s vehicle fleet on the path to achieving the company’s goal of reducing the carbon intensity of its operations by 33% by 2030 and becoming a carbon-neutral operator by 2050.

“Testing and implementing new electric vehicle technologies is one way we are taking concrete steps towards achieving our goal of being carbon neutral across our operations,” said Don Lindsay, President and CEO, Teck. “Teck is already one of the world’s lowest carbon-intensity producers of copper, zinc and steelmaking coal, which are key materials to enable the low-carbon transition, and we are committed to further reducing the carbon intensity of our operations to support a cleaner future.”

The pilot is expected to begin in summer 2022 and is projected to eliminate 418 tonnes of CO2 annually – the equivalent of approximately 90 passenger cars – for the first pilot vehicle, while also reducing costs through fuel savings and reduced maintenance.

“The fully-electric ALTDRIVE system is designed for this haul cycle at HVC requiring a vehicle that weighs 65,000kg loaded, 25,000kg unloaded, and completes the same four to five 95-kilometre roundtrips every workday,” says Robert Rennie, President, MEDATech. “Since the truck batteries will charge on the downhill haul through regenerative braking, the rig will require only a short battery recharge at the Ashcroft, B.C. rail terminal so the haul cycle time is expected to be the same as a conventional truck.”

The battery-electric drive system is expected to work more efficiently than a comparable diesel engine, outputting a constant 620kW (approximately 830 horsepower) and is configured to continuously output almost double the amount of torque.

This pilot project builds on Teck’s GHG reduction initiatives, including the recently announced agreement to work towards deploying 30 of Caterpillar’s zero-emissions large haul trucks at its steelmaking coal operations in the Elk Valley.

Click here to learn more about Teck’s approach to taking action on climate change.

Media Download:

Click here for an image of a MEDATech ALTDRIVE-powered fifth-wheel Western Star truck.

About Teck
As one of Canada’s leading mining companies, Teck is committed to responsible mining and mineral development with major business units focused on copper, zinc, and steelmaking coal, as well as investments in energy assets. Copper, zinc and high-quality steelmaking coal are required for the transition to a low-carbon world. Headquartered in Vancouver, Canada, Teck’s shares are listed on the Toronto Stock Exchange under the symbols TECK.A and TECK.B and the New York Stock Exchange under the symbol TECK. Learn more about Teck at www.teck.com or follow @TeckResources.

About MEDATech

MEDATech has been designing and building custom mobile heavy equipment since 2003. Our clients are in the Mining, Construction, Waste, Transportation, and Energy sectors all over the world. The one thing they all want is machines that are more efficient, safe, durable, precise and environmentally friendly. So that’s what we deliver.

MEDATech has 3 divisions:

· Engineering services – from consulting to engineer/design/build to industrial software development

· ALTDRIVE – all-electric powertrains

· BORTERRA – advanced drilling equipment

The people at MEDATech are engineers, technicians, operators and mechanics. They have worked in mines and in other industries where they operated the kinds of heavy equipment that the company builds. This has allowed MEDATech to become expert in building great machines, and in consulting on the solutions clients need.

MEDATech’s tried-and-true ALTDRIVE™ powertrain solution is the result of more than 10 years of development. ALTDRIVE powertrains can be found in mining-related vehicles all over North America.

Media Contacts

Teck Media Contact:

Chris Stannell

Public Relations Manager, Teck

604.699.4368

chris.stannell@teck.com

MEDATech Media Contact:

Carl Michener

¡Outwrite! Communications

416.476.7484

carl@outwrite.ca

2