0000883984-15-000005.txt : 20150220 0000883984-15-000005.hdr.sgml : 20150220 20150220170421 ACCESSION NUMBER: 0000883984-15-000005 CONFORMED SUBMISSION TYPE: 10-K PUBLIC DOCUMENT COUNT: 15 CONFORMED PERIOD OF REPORT: 20141231 FILED AS OF DATE: 20150220 DATE AS OF CHANGE: 20150220 FILER: COMPANY DATA: COMPANY CONFORMED NAME: ICU MEDICAL INC/DE CENTRAL INDEX KEY: 0000883984 STANDARD INDUSTRIAL CLASSIFICATION: SURGICAL & MEDICAL INSTRUMENTS & APPARATUS [3841] IRS NUMBER: 330022692 STATE OF INCORPORATION: DE FISCAL YEAR END: 1231 FILING VALUES: FORM TYPE: 10-K SEC ACT: 1934 Act SEC FILE NUMBER: 001-34634 FILM NUMBER: 15636566 BUSINESS ADDRESS: STREET 1: 951 CALLE AMANECER CITY: SAN CLEMENTE STATE: CA ZIP: 92763-6212 BUSINESS PHONE: 949-366-2183 MAIL ADDRESS: STREET 1: 951 CALLE AMANECER CITY: SAN CLEMENTE STATE: CA ZIP: 92763-6212 10-K 1 icui1231201410-k.htm 10-K ICUI 12.31.2014 10-K

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
 
FORM 10-K
 
ý ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
 
For the fiscal year ended December 31, 2014 or
 
o TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
 
For the transition period from             to            
 
Commission File No. 0-19974
 
ICU MEDICAL, INC.
(Exact name of Registrant as specified in its charter)
 
Delaware
 
33-0022692
(State or other jurisdiction of
 
(I.R.S. Employer
incorporation or organization)
 
Identification No.)
 
951 Calle Amanecer
 
 
San Clemente, California
 
92673
(Address of principal executive offices)
 
(Zip Code)
 
Registrant’s Telephone Number, Including Area Code: (949) 366-2183
 
Securities registered pursuant to Section 12(b) of the Act:
 
Title of each class
 
Name of each exchange on which registered
Common stock, par value $0.10 per share
Preferred Stock Purchase Rights
 
The NASDAQ Stock Market LLC
(Global Select Market)
 
Securities Registered Pursuant to Section 12(g) of the Act:  None
 
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  o Yes  ý No
 
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act. o Yes  ý No
 
Indicate by check mark whether registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  ý Yes  o No
 
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  Yes ý   No o
 
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. o
 
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company.  See definition of “large accelerated filer”, “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act (Check one): 
Large accelerated filer x
 
Accelerated filer o
 
 
 
Non-accelerated filer o
 
Small reporting company o
(Do not check if a smaller reporting company)
 
 
 
Indicated by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).  o Yes  ý No
 
The aggregate market value of the voting stock held by non-affiliates of registrant as of June 30, 2014, the last business day of registrant’s most recently completed second fiscal quarter, was $819,713,205*.
 
The number of shares outstanding of registrant’s common stock, $.10 par value, as of January 31, 2015 was 15,640,626.
 
DOCUMENTS INCORPORATED BY REFERENCE
 
Portions of the Proxy Statement for registrant’s 2015 Annual Meeting of Stockholders filed or to be filed pursuant to Regulation 14A within 120 days following registrant’s fiscal year ended December 31, 2014, are incorporated by reference into Part III of this Report.
 
____________________________
*  Without acknowledging that any person other than Dr. George A. Lopez is an affiliate, all directors and executive officers have been included as affiliates solely for purposes of this computation.
ICU Medical, Inc.
Form 10-K
For the Year Ended December 31, 2014
TABLE OF CONTENTS

 
 
Page
 
 





PART I

Item 1.  Business.
 
Overview

We are a leader in the development, manufacture and sale of innovative medical devices used in infusion therapy, oncology and critical care applications.  Our product line includes needlefree connection devices, custom infusion sets, closed system transfer devices ("CSTD") for the handling of hazardous drugs, advanced sensor catheters, needlefree closed blood sampling systems, disposable pressure transducer systems and innovative hemodynamic monitoring systems.  Our headquarters are in San Clemente, California.
 
Our products are used in acute care hospitals and ambulatory clinics in more than 60 countries throughout the world. We categorize our products into three main market segments: Infusion Therapy, Critical Care and Oncology. In prior periods, we included Tego needlefree hemodialysis connector and Lopez enteral valve under "Other". The Tego is now included under Infusion Therapy. The Lopez valve is now included under Critical Care. Our primary products include:

Infusion Therapy
Needlefree connector products
MicroClave and MicroClave Clear
Anti-Microbial MicroClave
Neutron
NanoClave
Clave
Custom infusion sets
Tego needlefree hemodialysis connector

Critical Care
Hemodynamic monitoring systems
Transpac disposable pressure transducers
Safeset closed needlefree blood conservation systems
Custom monitoring systems
Catheters
Advanced sensor catheters
Pulmonary artery thermodilution catheters
Central venous oximetry catheters
Multi-lumen central venous catheters
Custom angiography and interventional radiology kits
Lopez enteral valve
    
Oncology
ChemoLock CSTD and components
ChemoClave CSTD and components
Diana hazardous drug compounding system
    
We sell our products to medical product manufacturers, independent distributors and through direct sales to the end user. Revenues for 2014, 2013 and 2012 were $309.3 million, $313.7 million and $316.9 million, respectively. Hospira, our largest customer, accounted for 36%, 39% and 42% of our worldwide revenues in 2014, 2013 and 2012, respectively. Income from operations was $39.0 million, $51.9 million and $61.3 million in 2014, 2013 and 2012, respectively. Total assets were $541.1 million, $499.6 million and $428.5 million in 2014, 2013 and 2012, respectively.  


2


Company Background

ICU Medical, Inc. was founded in 1984 and our initial public offering was in 1992. In 1993, we launched the Clave, an innovative one-piece needlefree I.V. connection device. In 1998, we developed a computerized manufacturing process called SetMaker that enables us to design a custom infusion set to a customer's exact specifications and commence production in less than one day from receiving the order. Since the late 1990's, we have expanded our product offerings by introducing internally developed products and systems and acquiring product lines. We have previously launched internally developed products for use in critical care, oncology therapy and infusion therapy. These products include the Tego for use in dialysis, a line of oncology products including the ChemoClave and ChemoLock CSTDs, custom infusion sets, the Diana hazardous drug compounding system, the Neutron, a catheter patency device and the NanoClave, a smaller Clave product designed for neonatal and pediatric patients. In 2005, we acquired Hospira, Inc's ("Hospira") Salt Lake City manufacturing facility and entered into an agreement with Hospira to produce their critical care products exclusively for Hospira. In August 2009, we purchased all commercial rights and physical assets from Hospira's critical care product line which provided us control over all aspects of our critical care product line.

In 2011, we extended our 1995 supply and distribution agreement and 2001 co-promotion and distribution agreement with Hospira to 2018. We are also expanding our business through increased sales to other medical product manufacturers, independent distributors and through direct sales to the end users of our products. 

First person pronouns used in this Report, such as “we,” “us,” and “our,” refer to ICU Medical, Inc. and its subsidiaries unless context requires otherwise.
 
Our website address is http://www.icumed.com.  We make available our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q and Current Reports on Form 8-K, and amendments to those reports free of charge on our website as soon as reasonably practicable after filing them with the Securities and Exchange Commission ("SEC").  We also have our code of ethics posted on our website (http://www.icumed.com).  The information on our website is not incorporated into this Annual Report.
 
The public may read and copy any materials we file with the SEC at the SEC’s Public Reference Room at 100 F Street, NE, Washington, DC 20549. The public may obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330.  The SEC maintains an Internet site that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC on its website (http://www.sec.gov).
 
Products

Infusion Therapy

Infusion therapy lines, used in hospitals and ambulatory clinics, consist of a tube running from a bottle or plastic bag containing a solution to a catheter inserted in a patient’s vein.  The tube typically has several injection ports or Y-sites (conventionally, entry tubes covered by rubber caps) to which a secondary infusion line can be connected to permit constant intravenous administration of medications, fluids and nutrients, and to allow instantaneous intravenous administration of medication.

    Clave Needlefree Technology
 
Prior to the introduction of needle-safe connectors, a conventional infusion line terminated with a male luer connector to which a hollow-bore needle would be attached to penetrate a latex or non-latex rubber covered injection port to make a primary or secondary connection.  With the Clave technology, instead of attaching a hollow-bore needle to the male luer, a needlefree connector with Clave technology is used in place of the injection port, and the male luer, without a needle, is simply threaded into the Clave with a half turn. 
 
All types of medications can be administered through the Clave by using a standard syringe or various types of administration sets.  The Clave can be used with any conventional peripheral or central vascular access device, both for venous and arterial applications.  The resilience of the silicone compression seal permits repeated connections and disconnections without replacing the Clave. The Clave contains no natural rubber latex.

The MicroClave is smaller than the standard Clave but is functionally similar.  The MicroClave has a feature where upon disconnection of an infusion set or syringe, there is a neutral displacement of fluid. This allows clinicians to utilize known protocols without the risk of device failure and a saline flush regimen which reduces cost and exposure to the drug heparin. The

3


MicroClave is intended for use on all peripheral and central catheters, which allows it to be used throughout the hospital and reduces line items that the hospital may need to carry and the educational burden of having multiple devices. The MicroClave Clear is functionally identical to the MicroClave, and has a clear housing so that clinicians can visualize the fluid path.

The NanoClave is smaller than the MicroClave and is designed for use in highly customized applications generally found in neonatal and pediatric patient populations. The device also has a clear housing and incorporates Clave technology into a smaller connector, allowing clinicians to flush the connector clear of medications and blood with minimal flush volumes.

Neutron

The Neutron catheter patency device also features Clave technology, but includes a bi-directional silicone bellows that helps prevent blood reflux into a catheter to minimize the incidence of occlusion, or blocking of the catheter due to a blood clot. The Neutron was specifically designed to be used on patients receiving longer indwelling central venous catheters.
 
Tego

The Tego® is a needlefree hemodialysis connector that creates a mechanically and microbiologically closed system when attached to the hub of a catheter, eliminating open catheter hubs and lowering the chance of bacterial contamination and infection.

Custom Infusion Sets
 
We have developed innovative software systems and manufacturing processes known as SetMaker and iFactory that permit us to design a custom infusion set to a hospital’s or clinician’s exact specifications, commence production within less than a day after we receive the customer order and ship smaller orders of the custom infusion sets to the customer within three days of receipt.  While we are capable of meeting customer demand on this accelerated three-day schedule, in normal circumstances we ship within twenty-one to thirty days of receipt of the customers’ order.  This is a fraction of the time required by other custom set manufacturers. 
 
Under a 2001 agreement with Hospira, we manufacture all new custom infusion sets for sale by Hospira, and the two companies jointly promote the products under the name SetSource.  The current term of the agreement extends through 2018. 
 
Infusion Therapy sales accounted for $216.0 million, or 70%, of our revenue in 2014, $221.0 million, or 71%, of our revenue in 2013 and $226.1 million, or 71%, of our revenue in 2012. Additional information regarding infusion therapy sales over the last three years is discussed in Part II, Item 7 of this Annual Report on Form 10-K.

Critical Care Products
 
Critical care products are used to monitor vital signs as well as specific physiological functions of key organ systems.  We manufacture hemodynamic monitoring systems, vascular and cardiac catheters and monitoring systems and custom and interventional radiology kits that are used to monitor cardiac function and blood oxygen levels in critically ill patients.  They include all components of the invasive monitoring system.  A substantial portion of the invasive monitoring and angiography products are custom critical care products designed to meet the particular needs of the customer. Most of our critical care products can be sold in custom systems containing specific components to meet the specific needs of the customer, and in some cases, custom made or acquired components.

The primary critical care products we manufacture are the following:
 
Transpac Disposable Pressure Transducers:  Disposable pressure-sensing devices that provide accurate and continuous blood pressure readings and show the immediate effect of fluid management and drug administration.  These products are used most commonly on patients with suspected pulmonary disease or cardiovascular dysfunction.
 
Safeset Closed Needlefree Blood Conservation Systems:  Blood sampling systems that provide the clinician with a convenient, needlefree method to obtain a patient’s blood sample and to administer I.V. fluids or drugs in conjunction with blood pressure monitoring devices.  They are designed to protect the clinician from exposure to bloodborne pathogens, reduce the risk of I.V. line contamination and reduce blood waste for the patient.
 
Advanced Sensory Catheters: Catheters used to measure cardiac output and blood oxygen levels.  Depending on specific design, these catheters contain up to five lumens and use fiber-optics to continuously measure mixed venous oxygen

4


saturation, blood pressure and cardiac output.  They may also permit administration of fluids and drugs, monitoring of patient temperature and pressures and blood sampling.
 
Pulmonary Artery Thermodilution Catheters: Catheters used for cardiac output determinations, fluid and drug administration, temperature and pressures and blood sampling.  Depending on specific design, these catheters contain up to five lumens.

Central Venous Oximetry Catheters: Catheters used to measure central venous blood oxygen levels using fiber-optics. They may also permit administration of fluids and drugs, monitoring patient temperature and pressures and blood sampling.

Multi-lumen Central Venous Catheters: Catheters used for monitoring central venous pressure, blood sampling, and simultaneous administration of multiple I.V. solutions or drugs at individual flow rates.

Angiography Kits:  A broad range of devices for use in the cardiac catheterization laboratory that enable physicians to monitor the function of the heart and examine the coronary arteries.  They are various types of “Left Heart” and “Right Heart” procedural kits which include manifolds, syringes, stopcocks, specialized injection tubing and dye management systems, many of which contain pressure-sensing devices, and waste management systems.
 
Critical care sales accounted for accounted for $55.1 million, or 18%, of our revenue in 2014, $54.3 million, or 17%, of our revenue in 2013 and $58.9 million, or 19%, of our revenue in 2012. Additional information regarding critical care sales over the last three years is discussed in Part II, Item 7 of this Annual Report on Form 10-K.
 
Oncology
 
Oncology products are used to prepare and deliver hazardous medications such as those used in chemotherapy which, if released, can have harmful effects to the healthcare worker and environment.  In 2007, we introduced a series of ChemoClave devices that were specific to use in oncology. In 2013, we introduced the ChemoLock CSTD.

The preparation of hazardous drugs typically takes place in a pharmacy location where drugs are removed from vials and prepared for delivery to a patient. Those prepared drugs are then transferred to a nursing unit where the chemotherapy is administered via infusion pump sets to a patient. Components of the ChemoClave and ChemoLock product lines are used both in Pharmacy and on the nursing floors for administration. Custom design capability allows for a specialized product mix within the ChemoClave and ChemoLock systems to best adapt to the existing hazardous drug handling workflow.

The primary oncology products we manufacture are the following:
 
ChemoLock Needlefree Closed System Transfer Device: ChemoLock is the first and only needlefree closed system transfer device to receive FDA 510(k) clearance for both pharmacy (ONB) and patient administration (FPA) applications. ChemoLock prevents the escape of hazardous drug or vapor concentrations, blocks the transfer of environmental contaminants into the system, and eliminates needlestick injuries while minimizing hazardous drug exposure.

ChemoClave Needlefree Closed System Transfer Device: ChemoClave is a needlefree closed system transfer device for the safe handling of hazardous drugs. The ChemoClave system utilizes standard ISO luer locking connections, making it compatible with all brands of needlefree connectors and pump delivery systems.

Diana Hazardous Drug Compounding System: Diana is an automated sterile compounding system for the accurate, safe, and efficient preparation of hazardous drugs. It is a user-controlled automated system that provides repeatable accuracy of drug mixes, minimizes clinician exposure to hazardous drugs and reduces the risk of repetitive motion stresses for the clinician while helping to maintain the sterility of the drugs being mixed.

Oncology sales accounted for $36.9 million, or 12%, of our revenue in 2014, $37.1 million, or 12%, of our revenue in 2013 and $30.0 million, or 9%, of our revenue in 2012. Additional information regarding oncology sales over the last three years is discussed in Part II, Item 7 of this Annual Report on Form 10-K.
 
Other Revenues
    
We have a significant number of patents on the technology in our products and methods used to manufacture them.  We have continuing royalty and revenue share income from our technology and from time to time may receive license fees or royalties from other entities for the use of our technology.

5


      
Sales, Marketing and Customer Support
 
As of December 31, 2014, we employed 126 people worldwide in sales, marketing and customer support.  We built our sales team to market our products rather than rely exclusively on distributors and OEMs.  Our sales employees call on prospective customers, demonstrate products and deliver support programs necessary to train the manufacturing and distribution salespeople, as well as our end-use customers’ clinical staffs, in the use of our products.

Our administrative operations are in San Clemente, California, Vrable, Slovakia, Roncanova, Italy, Utrecht, Netherlands, Bella Vista, NSW Australia and Ludenscheid, Germany.  Our shipments from the United States are invoiced in U.S. dollars and our shipments in Europe are invoiced in Euros.

Domestic Sales

Domestic sales include U.S. sales to medical product manufacturers, domestic distributors and directly to the end customer. Total domestic sales were $212.6 million, $223.1 million and $237.0 million in 2014, 2013 and 2012, respectively.
 
Medical Product Manufacturers
 
We have a strategic supply and distribution relationship with Hospira, a major infusion product supplier, which has a significant share of the U.S. infusion set market under contract.  Our agreement with Hospira runs through 2018 and provides Hospira with conditional rights to distribute certain of our Clave and other products to certain categories of customers both in the United States and foreign countries.  Depending on the product and category of customer, these rights may be exclusive or nonexclusive.
 
Hospira purchases Clave products packaged separately for distribution to healthcare providers and in bulk for assembly into Hospira’s full range of dedicated pump infusion products.  The MicroClave, MicroClave Clear, ChemoClave CSTD and pre-pierced connector products are purchased and packaged separately.
 
Under another agreement with Hospira that extends through 2018, we have the exclusive right to manufacture all new custom gravity infusion sets for sale by Hospira, other than those custom sets that Hospira was manufacturing before we entered into the agreement in 2001.  We jointly promote the products under the name SetSource with Hospira. Hospira is the exclusive and non-exclusive distributor and co-promoter of SetSource products to certain categories of customers, including SetSource products containing both companies’ proprietary products.
 
Domestic sales to Hospira accounted for approximately 31% of our revenue in 2014.  The loss of Hospira as a customer would have a significant adverse effect on our business and operating results.
 
Independent Domestic Distributors
    
Distributors purchase and stock our products for resale to healthcare providers.  One distributor accounted for 7% of revenue in 2014 and one distributor accounted for 5% of revenue in 2014.  All other independent distributors accounted for less than 5% of revenue in 2014.  Although the loss of one or more of our larger distributors could have an adverse effect on our business, we believe we could readily locate other distributors in the same territories who could continue to distribute our products to the same customers.

International Sales

International sales were $96.6 million, $90.6 million and $79.9 million in 2014, 2013 and 2012, respectively.

International sales are to medical product manufacturers, distributors and directly to the end customer.   International sales are primarily concentrated in Europe, Canada, Asia Pacific, Southeast Asia, Latin America, Africa and the Middle East.  Customers in Europe are served by our facilities in Slovakia, Netherlands, Italy and Germany.  We serve the rest of the world from our facilities in the United States and Mexico.  As of December 31, 2014, we had 25 sales and sales support personnel serving Europe and 18 serving Asia Pacific, Southeast Asia, Latin America, Africa, the Middle East and Canada. 

6


 
Manufacturing
 
Manufacturing of our products involves injection molding of plastic and silicone parts, manual and automated assembly of the molded plastic parts and other components, quality control inspection, packaging and sterilization.  We mold most of our proprietary components, and perform all assembly, quality control, inspection, packaging, labeling and shipping of our products.  Our manufacturing operations function as a separate group, producing products for the marketing and sales groups.
 
We own a fully integrated medical device manufacturing facility in Salt Lake City, Utah with approximately 450,000 square feet of state-of-the art manufacturing space.  This building includes approximately 109,500 square feet of class 100,000 clean room area, approximately 36,000 square feet of other manufacturing space, approximately 77,000 square feet of warehouse space and approximately 155,000 square feet of office space. 

Our state-of-the-art injection molding technology and highly automated assembly systems are designed to maintain a high level of product quality and achieve high volume production at low unit manufacturing costs.  To achieve these advantages and to gain greater control over raw material and finished product delivery times, we mold the majority of our proprietary molded components.  The raw materials for our molding operation are principally resins and silicones, and these materials are available from several sources.  Our exposure to commodity price changes relates primarily to certain manufacturing operations that use resin. We manage our exposure to changes in those prices through our procurement and supply chain management practices.

Most of our manual assembly is done at our facilities in Ensenada, Mexico and Vrable, Slovakia, each of which has an electron beam ("e-beam") sterilizer and which have approximately 250,000 square feet and 77,000 square feet, respectively, of space for production and warehousing.  Principal products assembled manually in Mexico and Slovakia are used in conjunction with infusion therapy systems (which includes oncology) and critical care systems.

The majority of the infusion and oncology products we manufacture are sterilized in processes which use e-beam radiation.  Most critical care products and other certain products are currently sterilized in processes using gamma radiation or ethylene oxide gas (“EO”).  We have our own sterilization facilities at our plants in Mexico and Slovakia that are used to sterilize most of the products assembled in the respective plants.  All other sterilization is done by independent contractors.
 
We also assemble compounders in our leased facility in Ludenscheid, Germany. 

Government Regulation
 
Government regulation is a significant factor in the development, marketing and manufacturing of our products. The Food and Drug Administration (“FDA”) regulates medical product manufacturers and their products under a number of statutes including the Food, Drug and Cosmetic Act (“FDC Act”), and we and our products are subject to the regulations of the FDA.  The FDC Act provides two basic review procedures for medical devices.  Certain products may qualify for a submission authorized by Section 510(k) of the FDC Act, under which the manufacturer gives the FDA a pre-market notification of the manufacturer’s intention to commence marketing the product.  The manufacturer must, among other things, establish that the product to be marketed is substantially equivalent to another legally marketed product.  Marketing may commence when the FDA issues a letter finding substantial equivalence.  Some Medical Devices may qualify for the FDA as a Class II, 510(k) Exempt (Special Controls) medical device per 21 CFR 880.5440.  These “Special Controls” are defined as: “Adherence to the normal FDA regulations such as the QSR, Complaints, etc. and a specific guidance document” but require no pre-market notification to the FDA.  If a medical device does not qualify for the Section 510(k) procedure or the special controls exemption, the manufacturer must file a pre-market approval (“PMA”) application.  This requires substantially more extensive pre-filing testing than the Section 510(k) procedure and involves a significantly longer FDA review process.  FDA approval of a PMA application occurs only after the applicant has established safety and efficacy to the satisfaction of the FDA. Each of our current products has qualified for the Section 510(k) procedure, if needed, and we anticipate that any new products that we are likely to market will qualify for the expedited Section 510(k) clearance procedure, if needed. However, certain of our new products may require a lengthier time for clearance than we have experienced in the past, and there can be no assurance that a PMA application will not be required.  Further, there is no assurance that other new products we develop or any manufacturers that we might acquire, or claims that we may make concerning those products, will qualify for expedited clearance rather than the more time consuming PMA procedure or that, in any case, they will receive clearance from the FDA.  FDA regulatory processes are time consuming and expensive.  Uncertainties as to time required to obtain FDA clearances or approvals could adversely affect the timing and expense of new product introductions.  All of the regulated products that we currently manufacture are classified as Class II medical devices by the FDA.  Class II medical devices are subject to performance

7


standards relating to one or more aspects of the design, manufacturing, testing and performance or other characteristics of the product in addition to general controls involving compliance with labeling and record keeping requirements.
 
We must comply with FDA, International Organization for Standardization (“ISO”) and European Council Directive 93/42/EEC (“Medical Device Directive”) regulations governing medical device manufacturing practices.  The FDA, state, foreign agencies and ISO require manufacturers to register and subject manufacturers to periodic FDA, state, foreign agencies and ISO inspections of their manufacturing facilities.  We are a FDA and ISO registered medical device manufacturer, and must demonstrate that we and our contract manufacturers comply with the FDA’s current Quality System Regulations (“QSR”).  Under these regulations, the manufacturing process must be regulated and controlled by the use of written procedures and the ability to produce devices that meet the manufacturer’s specifications must be validated by extensive and detailed testing of every critical aspect of the process. They also require investigation of any deficiencies in the manufacturing process or in the products produced and detailed record keeping.  Further, the FDA and ISO’s interpretation and enforcement of these requirements has been increasingly strict in recent years and seems likely to be even more stringent in the future. Failure to adhere to QSR and ISO standards would cause the products produced to be considered in violation of the applicable law and subject to enforcement action.  The FDA and ISO monitor compliance with these requirements by requiring manufacturers to register with the FDA and ISO, and by subjecting them to periodic FDA and ISO inspections of manufacturing facilities.  If an FDA or ISO inspector observes conditions that might be violative, the manufacturer must correct those conditions or explain them satisfactorily, or face potential regulatory action that might include physical removal of the product from the marketplace.
 
We believe that our products and procedures are in compliance with all applicable FDA and ISO regulations.  There is no assurance, however, that other products we are developing or products that we may develop in the future will be cleared by the FDA and classified as Class II products, or that additional regulations restricting the sale of our present or proposed products will not be promulgated by the FDA, ISO or agencies in other jurisdictions.  In addition, changes in FDA, ISO or other federal or state health, environmental or safety regulations or their applications could adversely affect our business.

To market our products in the European Community (“EC”), we must conform to additional requirements of the EC and demonstrate conformance to established quality standards and applicable directives.  As a manufacturer that designs, manufactures and markets its own devices, we must comply with the quality management standards of EN ISO 13485. Those quality standards are similar to the QSR regulations.
 
Manufacturers of medical devices must also conform to EC Directives such as Council Directive 93/42/EEC and their applicable annexes.  Those regulations assure that medical devices are both safe and effective and meet all applicable established standards prior to being marketed in the EC.  Once a manufacturer and its devices are in conformance with the Medical Device Directive, the “CE” Mark may be affixed to its devices.  The CE Mark gives devices unobstructed entry to all the member countries of the EC.
 
We have demonstrated conformity to the regulation of EN ISO 13485 and the Medical Device Directive and we affix the CE Mark to our device labeling for product sold in member countries of the EC.

We believe our products and systems are in compliance with all EC requirements.  There can be no assurance, however, that other products we are developing or products that we may develop in the future will conform or that additional regulations restricting the sale of our present or proposed products will not be promulgated by the EC.
 
Competition
 
The market for infusion therapy, oncology and critical care products is intensely competitive. We believe that our ability to compete depends upon our continued innovation and the quality, convenience, reliability, patent protection and pricing of our products, in addition to access to distribution channels. We encounter significant competition in these markets both from large established medical device manufacturers and from smaller companies. Our ability to compete effectively depends on our ability to differentiate our products based on innovation, safety, product quality, cost effectiveness, ease of use and convenience, as well as our ability to perceive and respond to changing customer needs. In the long term, we expect that our ability to compete will continue to be enhanced by our ability to reduce unit manufacturing costs through improved production processes and higher volume production.

In the infusion therapy market, we currently hold the market leading position for needlefree infusion devices, including the original Clave, the Microclave and the MicroClave Clear. These products compete with, and currently contemplated new products will likely compete with, needlefree infusion devices and systems marketed by Baxter Healthcare Corporation (“Baxter”), B. Braun Medical, Inc. (“B. Braun”), CareFusion, Inc. (“CareFusion”), Becton Dickinson and

8


Company ("Becton Dickinson") and others. Although we believe that our needlefree infusion devices and custom set manufacturing capabilities have distinct advantages over competing systems, there is no assurance that they will be able to compete successfully with these products.

In the oncology market, we compete with other manufacturers of closed system transfer devices (CSTD) for the safe handling of oncology drugs, most notably Becton Dickinson, CareFusion, Equashield LLC and B. Braun. We believe that our current product offering provides benefits over these competing systems in several areas related to safety, ease of use, and cost; however, on-going innovation in this market space will be required, and there is no assurance that these innovations will be able to sustain continued growth.

The market for our critical care devices is highly competitive and our success in this area is based on pricing, customer service and product features. The overall market for critical care products has been declining in recent years in the pulmonary artery catheter segment as customers increasingly seek less invasive products to deliver patient hemodynamic status data.

Manufacturers of products with which we currently compete, or might compete with in the future, include large companies with an established presence in the healthcare products market and substantially greater financial, marketing and distribution, managerial and other resources. In particular, Baxter, CareFusion, Becton Dickinson and B. Braun are leading distributors of infusion and oncology systems, Edwards Life Sciences Corporation has a significant share of the critical care hemodynamic monitoring market, while Navilyst Medical, Inc., and Merit Medical Systems, Inc., are competitors in the angiography kit market. Several of these competitors have broad product lines and have been successful in obtaining contracts with a significant number of hospitals to supply substantially all of their product requirements in these areas. In order to achieve greater market penetration or maintain our existing market position, we have established strategic relationships with customers such as Hospira.

We believe the success of our market-leading needlefree connector line has and will continue to motivate others to develop one-piece needlefree connectors, which may incorporate many of the same functional and physical characteristics as ours. We are aware of a number of such products. We believe some of those products were developed by companies who currently have the distribution or financial capabilities equivalent to or greater than those that we have, and by other companies that we believe do not have similar capabilities, although some of those products may be distributed in the future by larger companies that do have such capabilities. We believe these products have had a moderate impact on our needlefree connector business to date, but there is no assurance that our current or future products will be able to successfully compete with these or future products developed by others.

We believe that our ability to compete in the custom products market depends upon the same factors affecting our existing products, but will be particularly affected by clinical differentiation, quality and delivery times to the customer. While we believe we have advantages in these areas, there is no assurance that other companies will not be able to compete successfully with our custom products.
 
Patents
     
We have United States and/or certain foreign patents relating to the technologies found in the Clave / MicroClave Connector, MicroClave Clear Connector, Neutron Connector, CLC2000 Connector, Tego Connector, Y-Clave Connector with Integral Check Valve, Spiros Closed Male Connector, Genie Closed Vial Access Device, Click Lock Technology, Custom Set Design and Manufacturing Methods, and Diana Hazardous Drug Compounding System. We have applications pending for additional United States and/or foreign patents on MicroClave Connector, Neutron Connector, Tego Connector, Y-Clave Connector with Integral Check Valve, Spiros Closed Male Connector, Genie Closed Vial Access Device, Diana Hazardous Drug Compounding System, and ChemoLock Connector.
 
Our success may depend in part on our ability to obtain patent protection for our products and to operate without infringing the proprietary rights of third parties.  While we have obtained certain patents and applied for additional United States and foreign patents covering certain of our products, there is no assurance that any additional patents will be issued, that the scope of any patent protection will prevent competitors from introducing similar devices or that any of our patents will be held valid if subsequently challenged.  Our patents are important in preventing others from introducing competing products that are as effective as our products.  The loss of patent protection on Clave/MicroClave, Neutron, ChemoClave and ChemoLock components, Custom Set Design and Manufacturing Systems could adversely affect our ability to exclude other manufacturers from producing effective competitive products and could have an adverse impact on our financial results.

The fact that a patent is issued to us does not eliminate the possibility that patents owned by others may contain claims that are infringed by our products.

9


 
There has been substantial litigation regarding patent and other intellectual property rights in the medical device industry.  Litigation, which would result in substantial cost to us and in diversion of our resources, may be necessary to defend us against claimed infringement of the rights of others and to determine the scope and validity of the proprietary rights of others.  Adverse determinations in such litigation could subject us to significant liabilities to third parties or could require us to seek licenses from third parties and could prevent us from manufacturing, selling or using our products, any of which could have a material adverse effect on our business.  In addition, we have initiated litigation, and may continue to initiate litigation in the future, to enforce our intellectual property rights against those we believe to be infringing on our patents.  Such litigation could result in substantial cost and diversion of resources.
 
Seasonality/Quarterly Results
 
The healthcare business in the United States is subject to quarterly fluctuations due to frequency of illness during the seasons, elective procedures, and over the last few years, the economy. In Europe, the healthcare business generally slows down in the summer months due to vacations resulting in fewer elective surgeries.  In addition, we can experience fluctuations in net sales as a result of variations in the ordering patterns of our largest customers, which may be driven more by production scheduling and their inventory levels, and less by seasonality.  Our expenses often do not fluctuate in the same manner as net sales, which may cause fluctuations in operating income that are disproportionate to fluctuations in our revenue.

Research and Development

Our research and development costs include personnel costs and expenses related to the development of new products. Research and development costs were $18.3 million in 2014, $12.4 million in 2013 and $10.6 million in 2012.
 
Employees

At December 31, 2014, we had 2,280 full-time employees, consisting of 237 engaged in sales, marketing and administration and 2,043 in manufacturing, molding, product development and quality control, including 1,355 in Mexico and 238 in Slovakia.

Long-lived Assets

The table below presents our long-lived assets by country (in millions):

 
 
December 31,
 
 
2014
 
2013
 
2012
Mexico
 
$
51.6

 
$
49.5

 
$
47.5

Slovakia
 
16.6

 
18.4

 
16.2

Italy
 
4.9

 
5.4

 
5.0

Germany
 
0.6

 
0.5

 
0.2

Total foreign
 
$
73.7

 
$
73.8

 
$
68.9

United States
 
151.0

 
139.2

 
129.9

Worldwide total
 
$
224.7

 
$
213.0

 
$
198.8






10


Item 1A.  Risk Factors.
 
In evaluating an investment in our common stock, investors should consider carefully, among other things, the following risk factors, as well as the other information contained in this Annual Report and our other reports and registration statements filed with the SEC.
 
Unexpected changes in our arrangements with Hospira may cause a decline in our sales and could result in a significant reduction in our sales and profits.

We depend on Hospira for a high percentage of our sales and earnings. Worldwide sales to Hospira were 36%, 39% and 42% of revenue for the years ended December 31, 2014, 2013 and 2012, respectively.
 
Under the terms of our agreements with Hospira, we are dependent on the marketing and sales efforts of Hospira for a large percentage of our sales, and Hospira determines the prices at which the products that we sell to Hospira will be sold to its customers. Hospira has conditional exclusive rights to sell Clave and our other products as well as custom infusion systems under the SetSource program in many of its major accounts.  If Hospira is unable to maintain its position in the marketplace, our sales and operations could be adversely affected.
 
In 2014 and 2013, U. S. Hospira substantially reduced its purchases of our infusion therapy products, resulting in a reduction in 2014 sales compared to 2013 and 2013 sales compared to 2012. If Hospira continues to reduce orders, we could experience lower sales and earnings in future years compared to 2014.
 
Our ability to maintain and increase our market penetration depends in significant part on the success of our arrangement with Hospira and Hospira’s arrangements with major buying organizations and its ability to renew such arrangements, as to which there is no assurance. Our business could be materially adversely affected if Hospira terminates its arrangement with us, negotiates lower prices, sells competing products or increases its sales of competing products, whether manufactured by Hospira or others, or otherwise alters the nature of its relationship with us. Although we believe that Hospira views us as a source of innovative and profitable products, there is no assurance that our relationship with Hospira will continue in its current form.
 
In contrast to our dependence on Hospira, our principal competitors in the market for protective infusion connection systems are much larger companies that dominate the market for infusion products and have broad product lines and large internal distribution networks. In many cases, these competitors are able to establish exclusive relationships with large hospitals, hospital chains, major buying organizations and home healthcare providers to supply substantially all of their requirements for infusion products. In addition, we believe that there is a trend among individual hospitals and alternate site healthcare providers to consolidate into or join large major buying organizations with a view to standardizing and obtaining price advantages on disposable medical products. These factors may limit our ability to gain market share through our independent dealer network, resulting in continued concentration of sales to and dependence on Hospira.
 
We expect that Hospira will continue to be one of our most important customers, particularly with respect to our Clave products and custom infusion systems.  With respect to these products, we remain dependent on our continued relationship with Hospira as well as Hospira’s position in the marketplace. We can provide no assurances that our relationship with Hospira will not change, resulting in adverse effects on sales and operations. In February 2015, it was announced that Pfizer is in the process of acquiring Hospira. The transaction is expected to be completed in the second half of 2015. Our expectation is that there will be no change in our relationship with Hospira and our agreements with them survive the transaction.

We are increasingly dependent on manufacturing in Mexico and Slovakia and could be adversely affected by any economic, social or political disruptions.
 
We continue to expand our production in Mexico and Slovakia. Any political or economic disruption in Mexico or Slovakia or a change in the local economies could have an adverse effect on our operations.  In 2014, production costs were approximately $101.3 million in Mexico and approximately $22.5 million in Slovakia. Most of the material we use in manufacturing is imported into Mexico and Slovakia, and substantially all of the products we manufacture in Mexico and Slovakia are exported. We depend on our ability to move goods across borders quickly. Any disruption in the free flow of goods across national borders could have an adverse effect on our business.
 
As of December 31, 2014, we employed 1,355 people in operations and product development in our plant in Ensenada, Mexico and 238 people in operations in our plant in Vrable, Slovakia. Business activity in the Ensenada area has expanded significantly, providing increased employment opportunities. This could have an adverse effect on our ability to hire

11


or retain necessary personnel and result in an increase in labor rates. We continue to take steps to compete for labor through attractive employment conditions and benefits, but there is no assurance that these steps will continue to be successful or that we will not face increasing labor costs in the future.
 
Additionally, political and social instability resulting from violence in certain areas of Mexico has raised concerns about the safety of our personnel.  These concerns may hinder our ability to send domestic personnel abroad and to hire and retain local personnel.  Such concerns may require us to have security for personnel traveling to our Mexico facility or to conduct more operations from the United States rather than Mexico, which may negatively impact our operations and result in higher costs and inefficiencies.

Our operating results may be adversely affected by unfavorable economic conditions which affect our customers’ ability to buy our products and could affect our relationships with our suppliers.
 
Disruptions in financial markets worldwide and other worldwide macro-economic challenges may cause our customers and suppliers to experience cash flow concerns.  If job losses and the resulting loss of health insurance and personal savings cause individuals to forgo or postpone treatment, the resulting decreased hospital use could affect the demand for our products.  As a result, customers may modify, delay or cancel plans to purchase our products and suppliers may increase their prices, reduce their output or change terms of sales. Additionally, if customers’ or suppliers’ operating and financial performance deteriorates, or if they are unable to make scheduled payments or obtain credit, customers may not be able to pay, or may delay payment of, accounts receivable owed to us and suppliers may impose different payment terms. Any inability of current and/or potential customers to pay us for our products or any demands by suppliers for different payment terms may adversely affect our earnings and cash flow.
  
Healthcare reform legislation could adversely affect our revenue and financial condition.
 
In recent years, there have been numerous initiatives on the federal and state levels for comprehensive reforms affecting the payment for, the availability of and reimbursement for healthcare services in the United States. In 2010, the Patient Protection and Affordable Care Act and the Health Care and Education Reconciliation Act were signed into law introducing comprehensive health insurance and healthcare reforms in the United States.  Among the provisions of such legislation that may have an adverse impact on us is a 2.3% excise tax imposed on medical device manufacturers for the sale of certain medical devices to United States customers. The excise tax, which became effective January 1, 2013, resulted in $1.9 million of additional expense in 2014 and $1.8 million of additional expense in 2013 recorded in Selling, General and Administrative expenses. The ultimate implementation of any healthcare reform legislation, and its impact on us, is impossible to predict. Any significant reforms made to the healthcare system in the United States, or in other jurisdictions, may have an adverse effect on our financial condition and results of operations.
 
Failure to protect our information systems against security breaches, service interruptions, or misappropriation of data could disrupt operations, compromise sensitive data, and expose us to liability, possibly causing our business and reputation to suffer.
 
We depend heavily on information technology infrastructure and systems to achieve our business objectives.  Any incident that impairs or compromises this infrastructure, including security breaches, malicious attacks or more general service interruptions, could impede our ability to process orders, manufacture and ship product in a timely manner, protect sensitive data and otherwise carry on business in the normal course.  Any such events could result in the loss of customers, revenue, or both, and could require us to incur significant expense to remediate, including legal claims or proceedings.  Further, as cyber security related incidents continue to evolve, and regulatory focus on these issues continues to expand, additional investment in protective measures, and vulnerability remediation, may be required.
 
If we are unable to effectively manage our internal growth or growth through acquisitions of companies, assets or products, our financial performance may be adversely affected.
 
We intend to continue to expand our marketing and distribution capability, which may include external expansion through acquisitions both in the United States and foreign markets. We may also consider expanding our product offerings through acquisitions of companies or product lines. We can provide no assurance that we will be able to identify, acquire, develop or profitably manage additional companies or operations or successfully integrate such companies or operations into our existing operations without substantial costs, delays or other problems.
 
We have built additional production facilities outside the United States, to reduce labor costs and eliminate transportation and other costs of shipping finished products from the United States and Mexico to customers outside North

12


America. The expansion of our manufacturing, marketing, distribution and product offerings both internally and through acquisitions or by contract may place substantial burdens on our management resources and financial controls. Decentralization of assembly and manufacturing could place further burdens on management to manage those operations and maintain efficiencies and quality control.
 
The increasing burdens on our management resources and financial controls resulting from internal growth and acquisitions could adversely affect our operating results. In addition, acquisitions may involve a number of special risks in addition to the difficulty of integrating cultures and operations and the diversion of management’s attention, including adverse short-term effects on our reported operating results, dependence on retention, hiring and training of key personnel, risks associated with unanticipated problems or legal liabilities and amortization of acquired intangible assets, some or all of which could materially and adversely affect our operations and financial performance.

Our business could be materially and adversely affected if we fail to defend and enforce our patents, if our products are found to infringe patents owned by others or if the cost of patent litigation becomes excessive or as our key patents expire.
 
We have patents on certain products, software and business methods, and pending patent applications on other intellectual property and inventions. There is no assurance, however, that patents pending will issue or that the protection from patents which have issued or may issue in the future will be broad enough to prevent competitors from introducing similar devices, that such patents, if challenged, will be upheld by the courts or that we will be able to prove infringement and damages in litigation.
 
We are substantially dependent upon the patents on our proprietary products to prevent others from manufacturing and selling products similar to ours.  We generally have multiple patents covering various features of a product, and as each patent expires, the protection afforded by that patent is no longer available to us, even though protection of features that are covered by other unexpired patents may continue to be available to us.  The loss of patent protection on certain features of our products may make it possible for others to manufacture and sell products with features similar to ours, which could adversely affect our business.
 
If others choose to manufacture and sell products similar to or substantially the same as our products, it could have a material adverse effect on our business through loss of unit volume or price erosion, or both, and could adversely affect our ability to secure new business.
 
In the past, we have faced patent infringement claims related to the Clave, the CLC2000 and Tego. We believe these claims had no merit, and all have been settled or dismissed.  We may also face claims in the future. Any adverse determination on these claims related to the Clave or other products, if any, could have a material adverse effect on our business.
 
From time to time we become aware of newly issued patents on medical devices which we review to evaluate any infringement risk. We are aware of a number of patents for infusion connection systems that have been issued to others. While we believe these patents will not affect our ability to market our products, there is no assurance that these or other issued or pending patents might not interfere with our right or ability to manufacture and sell our products.
 
There has been substantial litigation regarding patent and other intellectual property rights in the medical device industry. Patent infringement litigation, which may be necessary to enforce patents issued to us or to defend ourselves against claimed infringement of the rights of others, can be expensive and may involve a substantial commitment of our resources which may divert resources from other uses. Adverse determinations in litigation or settlements could subject us to significant liabilities to third parties, could require us to seek licenses from third parties, could prevent us from manufacturing and selling our products or could fail to prevent competitors from manufacturing products similar to ours. Any of these results could materially and adversely affect our business.

Expiring patents may affect our future sales.
 
Most of our products are covered by patents that, if valid, give us a degree of market exclusivity during the term of the patent. The legal life of a patent in the United States is 20 years from application. Our patents will expire at various dates through 2032. Upon patent expiration, our competitors may introduce products using the same technology. As a result of this possible increase in competition, we may need to reduce our prices to maintain sales of our products, which would make them less profitable. If we fail to develop and successfully launch new products prior to the expiration of patents for our existing products, our sales and profits with respect to those products could decline significantly. We may not be able to develop and successfully launch more advanced replacement products before these and other patents expire.


13


Damage to any of our manufacturing facilities could impair our ability to produce our products.
 
A severe weather event, other natural or man-made disaster, labor difficulties, political unrest or any other significant disruption affecting one of our manufacturing facilities could materially and adversely impact our business, financial condition and results of operations.

We have a single manufacturing facility for our Clave products located in Salt Lake City, Utah.  Our Salt Lake City facility also produces other components on which our manufacturing operations in Mexico and Slovakia rely. 

In 2010, our Slovakia plant was severely flooded from unusually high levels of rainfall that resulted in a delay in opening this plant for production and required extensive repairs to the facility and machinery.

Damage to any of our facilities could render us unable to manufacture our products or require us to reduce the output of products at the damaged facility.
 
We are dependent on single and limited source suppliers which subjects our business and results of operations to risks of supplier business interruptions.
 
Although we have risk mitigation plans in place with key suppliers, we have materials (such as resins) that are critical to our ability to manufacture our products, the supply of which is currently from a sole supplier.  We cannot be certain that our current suppliers will continue to provide us with the quantities of materials that we require or satisfy our anticipated specifications and quality requirements. Any supply interruption in limited or sole sourced raw materials could materially harm our ability to manufacture our products until a new source of supply, if any, could be identified and qualified. Although we believe there are other suppliers of these raw materials, we may be unable to find a sufficient alternative supply channel in a reasonable time or on commercially reasonable terms. Any performance failure on the part of our suppliers could delay the development and manufacture of our products, which could have a material adverse effect on our business.

Expansion of our manufacturing facilities may result in inefficiencies which could have an adverse effect on our operations and financial results.
 
In the fourth quarter of 2006, we experienced significant production inefficiencies following a large increase in production volume in Mexico and the transfer of San Clemente production to Salt Lake City.  In 2007, we expanded our Mexico facility and, anticipating further increases in volume at that facility, increased the workforce.  An additional expansion of our Mexico facility was completed in January 2011. Turnover among new employees is unusually high in Mexico, and the additional time spent in classroom training and on the job training could create production inefficiencies in Mexico in the future.  The addition of new products will require additional molding in Salt Lake City and manual assembly work in Mexico and Slovakia.  In 2010, we started product shipments from our new plant in Slovakia to customers in Europe. Expansions of our production capacity will require significant management attention to avoid inefficiencies of the type experienced in 2006, and the effect of any inefficiencies can be particularly expensive in Salt Lake City because of the high fixed costs in this highly automated facility.

Because we are dependent on Clave products for a major portion of our sales, any decline in sales of Clave products could result in a significant reduction in our sales and profits.
 
We depend heavily on sales of Clave products, especially sales of Clave products to Hospira, which decreased $12.4 million in 2014 compared to 2013. Most of our sales of Clave products are in the United States. Future sales increases for Clave products may depend on increases in sales of custom infusion systems, expansion in the international markets or acquisition of new customers in the United States. We cannot give any assurance that sales of Clave products will increase or that we can sustain current profit margins on Clave products indefinitely.
 
We believe that the success of the Clave has motivated, and will continue to motivate, competitors to develop one piece needleless connectors. If other manufacturers successfully develop and market effective products that are competitive with Clave products, Clave sales could decline, we could lose market share, and we could encounter sustained price and profit margin erosion.
 

14


Because we operate in international markets, we are subject to political and economic risks that we do not face in the United States.
 
We operate in a global market. Global operations are subject to risks, including political and economic instability, general economic conditions, imposition of government controls, the need to comply with a wide variety of foreign and United States export laws, trade restrictions and the greater difficulty of administering business overseas.  As our operations and sales located in Europe and other areas outside the United States increase, we may face new challenges and uncertainties, although we can give no assurance that such operations and sales will increase.
 
International sales pose additional risks related to competition with larger international companies and established local companies, our possibly higher cost structure, our ability to open foreign manufacturing facilities that can operate profitably and higher credit risk.
 
We have undertaken an initiative to increase our international sales, and have distribution arrangements in all the principal countries in Western Europe, the Pacific Rim, Middle East, Latin America, Canada and South Africa. We plan to sell in most other areas of the world. We export most of our products sold internationally from the United States, Mexico and Slovakia. Our principal competitors in international markets consist of much larger companies as well as smaller companies already established in the countries into which we sell our products. Our cost structure is often higher than that of our competitors because of the relatively high cost of transporting product to some local markets as well as our competitors’ lower local labor costs in some markets. For these reasons, among others, we expect to open manufacturing facilities in foreign locations. There is no certainty that we will be able to open local manufacturing facilities or that those facilities will operate on a profitable basis.
 
Our international sales are subject to higher credit risks than sales in the United States. Many of our distributors are small and may not be well capitalized. Payment terms are relatively long. The European hospitals tend to be significantly slower in payment which has resulted in an increase to our days sales outstanding from previous years.  Our prices to our international distributors, outside of Europe, for product shipped to the customers from the United States or Mexico are generally denominated in U.S. dollars, but their resale prices are set in their local currency. A decline in the value of the local currency in relation to the U.S. dollar may adversely affect their ability to profitably sell in their market the products they buy from us, and may adversely affect their ability to make payment to us for the products they purchase. Legal recourse for non-payment of indebtedness may be uncertain. These factors all contribute to a potential for credit losses.

Our operations may be adversely impacted by our exposure to risks related to foreign currency exchange rates.
 
We market our products in certain foreign markets through our subsidiaries and other international distributors. The related sales agreements may provide for payments in a foreign currency. Accordingly, our operating results are subject to fluctuations in foreign currency exchange rates. When the U.S. dollar weakens against these currencies, the dollar value of foreign-currency denominated revenue and expense increases, and when the dollar strengthens against these currencies, the dollar value of foreign-currency denominated revenue and expense decreases. We are exposed to foreign currency risk on outstanding foreign currency denominated receivables and payables. Changes in exchange rates may adversely affect our results of operations. Our primary foreign currency exchange rate exposures are currently with the Euro and Mexican Peso against the U.S. dollar.
 
We currently do not hedge against our foreign currency exchange rate risks and therefore believe our exposure to these risks may be higher than if we entered into hedging transactions, including forward exchange contracts or similar instruments. If we decide in the future to enter into forward foreign exchange contracts to attempt to reduce the risk related to foreign currency exchange rates, these contracts may not mitigate the potential adverse impact on our financial results due to the variability of timing and amount of payments under these contracts. In addition, these types of contracts may themselves cause financial harm to us and have inherent levels of counter-party risk over which we would have no control.
 

15


Continuing pressures to reduce healthcare costs may adversely affect our prices. If we cannot reduce manufacturing costs of existing and new products, our sales may not grow and our profitability may decline.
 
Increasing awareness of healthcare costs, public interest in healthcare reform and continuing pressure from Medicare, Medicaid, group purchasing organizations and other payers to reduce costs in the healthcare industry, as well as increasing competition from other protective products, could make it more difficult for us to sell our products at current prices. In the event that the market will not accept current prices for our products, our sales and profits could be adversely affected. We believe that our ability to increase our market share and operate profitably in the long term may depend in part on our ability to reduce manufacturing costs on a per unit basis through high volume production using highly automated molding and assembly systems. If we are unable to reduce unit manufacturing costs, we may be unable to increase our market share for Clave products or may lose market share to alternative products, including competitors’ products. Similarly, if we cannot reduce unit manufacturing costs of new products as production volumes increase, we may not be able to sell new products profitably or gain any meaningful market share. Any of these results would adversely affect our future results of operations.

Increased competition in our critical care product line resulted in management's decision to decrease our average selling prices on all critical care products. The price reductions went into effect in the middle of 2011 with the goal of retaining existing customers and attracting new customers. We can provide no assurances that customers will purchase products from us. Continued price pressures could reduce our ability to effectively compete in this market.
 
If we are unable to compete successfully on the basis of product innovation, quality, convenience, price and rapid delivery with larger companies that have substantially greater resources and larger distribution networks than us, we may be unable to maintain market share, in which case our sales may not grow and our profitability may be adversely affected.
 
The market for infusion products is intensely competitive. We believe that our ability to compete depends upon continued product innovation, the quality, convenience and reliability of our products, access to distribution channels, patent protection and pricing. The ability to compete effectively depends on our ability to differentiate our products based on safety features, product quality, cost effectiveness, ease of use and convenience, as well as our ability to perceive and respond to changing customer needs. We encounter significant competition in our markets both from large established medical device manufacturers and from smaller companies. Many of these firms have introduced competitive products with protective features not provided by the conventional products and methods they are intended to replace. Most of our current and prospective competitors have economic and other resources substantially greater than ours and are well established as suppliers to the healthcare industry. Several large, established competitors offer broad product lines and have been successful in obtaining full-line contracts with a significant number of hospitals and group purchasing organizations to supply all of their infusion product requirements. There is no assurance that our competitors will not substantially increase resources devoted to the development, manufacture and marketing of products competitive with our products. The successful implementation of such a strategy by one or more of our competitors could materially and adversely affect us.

If we do not successfully develop and commercialize enhanced or new products that remain competitive with new products or alternative technologies developed by others, we could lose revenue opportunities and customers, and our ability to grow our business would be impaired.
 
The medical device industry is characterized by rapid product development and technological advances, which places our products at risk of obsolescence. Our long-term success and profit margins depend upon the development and successful commercialization of new products, new or improved technologies and additional applications of our technology. The research and development process is time-consuming and costly, and may not result in products or applications that we can successfully commercialize.  We can give no assurance that any such new products will be successful or that they will be accepted in the marketplace.

The high level of competition and group purchasing organizations place pressure on our profit margins and we may not be able to compete successfully.
 
The disposable medical device segment of the health care industry in which we operate is highly competitive and is experiencing both horizontal and vertical consolidation. The high level of competition in our industry places pressure on profit margins. Some of our competitors have greater resources than we have. These competitive pressures could have a material adverse effect on our business, financial condition or results of operations.
 
Health care reform and the related pressure to contain costs have led to the advent of group purchasing organizations in the United States. These group purchasing organizations enter into preferred supplier arrangements with one or more manufacturers of medical products in return for price discounts to members of the group purchasing organizations. If we are not

16


able to obtain new preferred supplier commitments from major group purchasing organizations or retain those commitments that we currently have, which are generally terminable by either party for any reason upon the expiration of a defined notice period, our sales and profitability could be adversely affected. However, even if we are able to obtain and retain preferred supplier commitments from group purchasing organizations, they may not deliver high levels of compliance by their members, meaning that we may not be able to offset the negative impact of lower per-unit prices or lower margins with increases in unit sales or in market share.
 
If demand for our products were to decline significantly, we might not be able to recover the cost of our expensive automated molding and assembly equipment and tooling, which could have an adverse effect on our results of operations.
 
Our production tooling is relatively expensive, with each “module,” which consists of an automated assembly machine and the molds and molding machines which mold the components, costing several million dollars. Most of the modules are for the Clave product family.  If the demand for these products changes significantly, which could happen with the loss of a customer or a change in product mix, it may be necessary for us to recognize an impairment charge for the value of the production tooling because its cost may not be recovered through production of saleable product, which could adversely affect our financial condition.
 
We have been and will be ordering production molds and equipment for our new products.  We expect to order semi-automated or fully automated assembly machines for other new products in 2015.  If we do not achieve significant sales of these new products, it might be necessary for us to recognize an impairment charge for the value of the production tooling because its costs may not be recovered through production of saleable product, which could adversely affect our financial condition.
 
If we cannot obtain additional custom tooling and equipment on a timely basis to enable us to meet demand for our products, we might be unable to increase our sales or might lose customers, in which case our sales could decline.
 
We expanded our manufacturing capacity substantially in recent years, and we expect that continued expansion may be necessary. Molds and automated assembly machines generally have a long lead-time with vendors, often nine months or longer. Inability to secure such tooling in a timely manner, or unexpected increases in production demands, could cause us to be unable to meet customer orders. Such inability could cause customers to seek alternatives to our products.

Increases in the cost of petroleum-based and natural gas-based products or loss of supply could have an adverse effect on our profitability.
 
Most of the materials used in our products are resins, plastics and other material that depend upon oil or natural gas as their raw material. Crude oil markets are affected by political uncertainty in the Middle East, and there is no assurance that crude oil supplies will not be interrupted in the future.  Any such interruption could have an adverse effect on our ability to produce, or the cost to produce, our products.  Also, crude oil and natural gas prices have been volatile in recent years. Our suppliers have historically passed some of their cost increases on to us, and if such prices are sustained or increase further, our suppliers may pass further cost increases on to us. In addition to the effect on resin prices, transportation costs have increased because of the effect of higher crude oil prices, and we believe most of these costs have been passed on to us. Our ability to recover these increased costs may depend upon our ability to raise prices on our products. In the past, we have rarely raised prices and it is uncertain that we would be able to raise them to recover higher prices from our suppliers. Our inability to raise prices in those circumstances, or to otherwise recover these costs, could have an adverse effect on our profitability.

Our business could suffer if we lose the services of key personnel.

We are dependent upon the management and leadership of our executive team, as well as other members of our senior management team.  If one or more of these individuals were unable or unwilling to continue in his or her present position, our business would be disrupted and we might not be able to find replacements on a timely basis or with the same level of skill and experience, which could have an adverse effect on our business.  We do not have "key person" life insurance policies on any of our employees. 

Our ability to market our products in the United States and other countries may be adversely affected if our products or our manufacturing processes fail to qualify under applicable standards of the FDA and regulatory agencies in other countries.
 
Government regulation is a significant factor in the development, marketing and manufacturing of our products. Our products are subject to clearance by the United States Food and Drug Administration (“FDA”) under a number of statutes including the Food Drug and Cosmetics Act (“FDC Act”). Each of our current products has qualified, and we anticipate that

17


any new products we are likely to market will qualify for clearance under the FDA’s expedited pre-market notification procedure pursuant to Section 510(k) of the FDC Act. However, certain of our new products may require a longer time for clearance than we have experienced in the past and there can be no assurance that a PMA application will not be required.  Further, there is no assurance that other new products developed by us or any manufacturers that we might acquire will qualify for expedited clearance rather than a more time consuming pre-market approval procedure or that, in any case, they will receive clearance from the FDA. FDA regulatory processes are time consuming and expensive. Uncertainties as to the time required to obtain FDA clearances or approvals could adversely affect the timing and expense of new product introductions. In addition, we must manufacture our products in compliance with the FDA’s Quality System Regulations, which cover the methods and documentation of the design, testing, production, component suppliers control, quality assurance, labeling, packaging, storage and shipping of our products.

The FDA has broad discretion in enforcing the FDC Act, and noncompliance with the FDC Act could result in a variety of regulatory actions ranging from warning letters, product detentions, device alerts or field corrections to mandatory recalls, seizures, injunctive actions and civil or criminal penalties. If the FDA determines that we have seriously violated applicable regulations, it could seek to enjoin us from marketing our products or we could be otherwise adversely affected by delays or required changes in new products. In addition, changes in FDA, or other federal or state, health, environmental or safety regulations or in their application could adversely affect our business.
 
To market our products in the European Community (“EC”), we must conform to additional requirements of the EC and demonstrate conformance to established quality standards and applicable directives. As a manufacturer that designs, manufactures and markets its own devices, we must comply with the quality management standards of ISO 13485 (2012). Those quality standards are similar to the FDA’s Quality System Regulations. Manufacturers of medical devices must also be in conformance with EC Directives such as Council Directive 93/42/EEC (“Medical Device Directive”) and their applicable annexes. Those regulations assure that medical devices are both safe and effective and meet all applicable established standards prior to being marketed in the EC. Once a manufacturer and its devices are in conformance with the Medical Device Directive, the “CE” Mark maybe affixed to its devices. The CE Mark gives devices an unobstructed entry to all the member countries of the EC. There is no assurance that we will continue to meet the requirements for distribution of our products in Europe.
 
Distribution of our products in other countries may be subject to regulation in those countries, and there is no assurance that we will obtain necessary approvals in countries in which we want to introduce our products.
 
Product liability claims could be costly to defend and could expose us to loss.
 
The use of our products exposes us to an inherent risk of product liability. Patients, healthcare workers or healthcare providers who claim that our products have resulted in injury could initiate product liability litigation seeking large damage awards against us. Costs of the defense of such litigation, even if successful, could be substantial. We maintain insurance against product liability and defense costs in the amount of $10,000,000 per occurrence. There is no assurance that we will successfully defend claims, if any, arising with respect to products or that the insurance we carry will be sufficient. A successful claim against us in excess of insurance coverage could materially and adversely affect us. Furthermore, there is no assurance that product liability insurance will continue to be available to us on acceptable terms.
 
We may be required to implement a costly product recall.
 
In the event that any of our products proves to be defective, we can voluntarily recall, or the FDA or other regulatory agencies could require us to redesign or implement a recall of, any of our products.  We believe that any recall could result in significant costs to us and significant adverse publicity, which could harm our ability to market our products in the future. Though it may not be possible to quantify the economic impact of a recall, it could have a material adverse effect on our business, financial condition and results of operations.
 
We generally offer a limited warranty for product returns which are due to defects in quality and workmanship.  We attempt to estimate our potential liability for future product returns and establish reserves on our financial statements in amounts that we believe will be sufficient to address our warranty obligations; however, our actual liability for product returns may significantly exceed the amount of our reserves.  If we underestimate our potential liability for future product returns, or if unanticipated events result in returns that exceed our historical experience, our financial condition and operating results could be materially and adversely affected.
 

18


Our Stockholder Rights Plan, provisions in our charter documents and Delaware law could prevent or delay a change in control, which could reduce the market price of our common stock.
 
On July 15, 1997, our Board of Directors adopted a Stockholder Rights Plan (the “Plan”) and, pursuant to the Plan, declared a dividend distribution of one Right for each outstanding share of our common stock to stockholders of record at the close of business on July 28, 1997. The Plan expired in 2007 and our Board of Directors adopted an Amended and Restated Rights Agreement in July 2007.  Under its current provisions, each Right entitles the registered holder to purchase from us one one-hundredth of a share of Series A Junior participating Preferred Stock, no par value, at a purchase price of $225 per one one-hundredth of a share, subject to adjustment. The Plan is designed to afford the Board of Directors a great deal of flexibility in dealing with any takeover attempts and is designed to cause persons interested in acquiring us to deal directly with the Board of Directors, giving it an opportunity to negotiate a transaction that maximizes stockholder values. The Plan may, however, have the effect of discouraging persons from attempting to acquire us.
 
Investors should refer to the description of the Plan in our 2007 10-K filed with the Securities and Exchange Commission.

Our Certificate of Incorporation and Bylaws include provisions that may discourage or prevent certain types of transactions involving an actual or potential change of control, including transactions in which the stockholders might otherwise receive a premium for their shares over then current market prices. In addition, the Board of Directors has the authority to issue shares of Preferred Stock and fix the rights and preferences thereof, which could have the effect of delaying or preventing a change of control otherwise desired by the stockholders. In addition, certain provisions of Delaware law may discourage, delay or prevent someone from acquiring or merging with us.
 
The price of our common stock has been and may continue to be highly volatile due to many factors.
 
The market for small and mid-market capitalization companies can be highly volatile, and we have experienced significant volatility in the price of our common stock in the past. From January 2012 through December 2014, our trading price ranged from a high of $87.50 per share to a low of $43.51 per share.  We believe that factors such as quarter-to-quarter fluctuations in financial results, differences between stock analysts’ expectations and actual quarterly and annual results, new product introductions by us or our competitors, changing regulatory environments, litigation, changes in healthcare reimbursement policies, sales or the perception in the market of possible sales of common stock by insiders, market rumors and substantial product orders could contribute to the volatility in the price of our common stock. General economic trends unrelated to our performance such as recessionary cycles and changing interest rates may also adversely affect the market price of our common stock; the recent macroeconomic downturn could depress our stock price for some time.
 
Most of our common stock is held by, or included in accounts managed by, institutional investors or managers. Several of those institutions own or manage a significant percentage of our outstanding shares, with the ten largest interests accounting for 46% of our outstanding shares at the end of 2014. If one or more of the institutions or if our other large stockholders should decide to reduce or eliminate their position in our common stock, it could cause a significant decrease in the price of our common stock.

Item 1B.  Unresolved Staff Comments.
 
None

Item 2.  Properties.
 
We own a 39,000 square foot building and a 28,000 square foot building in San Clemente, California, a 450,000 square foot building in Salt Lake City, Utah, a 250,000 square foot building on approximately 94 acres of land in Ensenada, Baja California, Mexico, a 23,000 square foot building in Roncanova, Italy and a 77,000 square foot building on approximately 11 acres of land in Vrable, Slovakia.  We lease a building in Ludenscheid, Germany. We lease office space in Utrecht, Netherlands and Bella Vista, NSW Australia.

Item 3.  Legal Proceedings.
 
We are from time to time involved in various legal proceedings, either as a defendant or plaintiff, most of which are routine litigation in the normal course of business. We believe that the resolution of the legal proceedings in which we are involved will not have a material adverse effect on our financial position or results of operations. 

19



Item 4.  Mine Safety Disclosures.

Not applicable
PART II
Item 5.  Market for Registrant’s Common Equity, Related Stockholder Matters, and Issuer Purchases of Equity Securities.
 
Our common stock has been traded on the NASDAQ Global Select Market under the symbol “ICUI” since our initial public offering on March 31, 1992.  The following table sets forth, for the quarters indicated, the high and low closing prices for our common stock quoted by NASDAQ:
 
2014
 
High
 
Low
First quarter
 
$
66.20

 
$
56.75

Second quarter
 
61.56

 
54.19

Third quarter
 
65.23

 
57.07

Fourth quarter
 
85.71

 
63.81

 
2013
 
High
 
Low
First quarter
 
$
63.91

 
$
56.07

Second quarter
 
75.70

 
58.34

Third quarter
 
75.90

 
67.84

Fourth quarter
 
68.74

 
60.86

 
We have never paid dividends and do not anticipate paying dividends in the foreseeable future as the Board of Directors intends to retain future earnings for use in our business or to purchase our shares.  Any future determination as to payment of dividends or purchase of our shares will depend upon our financial condition, results of operations and such other factors as the Board of Directors deems relevant.
 
As of January 31, 2015, we had 71 stockholders of record. This does not include persons whose stock is in nominee or “street name” accounts through brokers.

Securities authorized for issuance under equity compensation plans is discussed in Part III, Item 12 of this Annual Report on Form 10-K.

Issuer Repurchase of Equity Securities
 
In July 2010, our Board of Directors approved a common stock purchase plan to purchase $40.0 million of our common stock.  This plan has no expiration date.
 
The following is a summary of our stock repurchasing activity during the fourth quarter of 2014:
 
Period
 
Shares
purchased
 
Average
price paid
per share
 
Shares
purchased
as part of a
publicly
announced
program
 
Approximate
dollar value that
may yet be
purchased
under the
program
10/01/2014 - 10/31/2014
 

 
$

 

 
$
22,522,000

11/01/2014 - 11/30/2014
 

 
$

 

 
22,522,000

12/01/2014 - 12/31/2014
 

 
$

 

 
22,522,000

Fourth quarter 2014 total
 

 
$

 

 
$
22,522,000



20


COMPARISON OF CUMULATIVE TOTAL RETURN FROM JANUARY 1, 2010 TO DECEMBER 31, 2014 OF ICU MEDICAL, INC., NASDAQ AND NASDAQ MEDICAL SUPPLIES INDEX
 
The following graph shows the total stockholder return on our common stock based on the market price of the common stock from December 31, 2009 to December 31, 2014 and the total returns of the NASDAQ U.S. Index and NASDAQ Medical Supplies Index for the same period.

 
 
 
12/31/2009
 
12/31/2010
 
12/31/2011
 
12/31/2012
 
12/31/2013
 
12/31/2014
ICU Medical, Inc.
 
$
100.00

 
$
100.16

 
$
123.49

 
$
167.21

 
$
174.84

 
$
224.75

NASDAQ U.S. Index
 
$
100.00

 
$
117.55

 
$
117.91

 
$
137.29

 
$
183.26

 
$
206.09

NASDAQ Medical Supplies Index
 
$
100.00

 
$
107.49

 
$
103.42

 
$
127.26

 
$
155.82

 
$
187.24

 
Assumes $100 invested on December 31, 2009 in ICU Medical Inc.’s common stock, the NASDAQ U.S. Index and the NASDAQ Medical Supplies Index and that all dividends, if any, were reinvested.

21



Item 6.  Selected Financial Data.

ICU MEDICAL, INC.
SELECTED FINANCIAL DATA
 
 
 
Year ended December 31,
 
 
(in thousands, except per share data)
 
 
2014
 
2013
 
2012
 
2011
 
2010
INCOME DATA:
 
 

 
 

 
 

 
 

 
 

Revenue
 
 

 
 

 
 

 
 

 
 

Net sales
 
$
308,770

 
$
313,056

 
$
316,322

 
$
301,642

 
$
282,357

Other
 
490

 
660

 
547

 
553

 
602

Total revenue
 
309,260

 
313,716

 
316,869

 
302,195

 
282,959

Cost of goods sold
 
157,859

 
158,984

 
160,359

 
159,841

 
153,989

Gross profit
 
151,401

 
154,732

 
156,510

 
142,354

 
128,970

Selling, general and administrative expenses
 
88,939

 
89,006

 
84,604

 
85,287

 
76,636

Research and development expenses
 
18,332

 
12,407

 
10,630

 
8,588

 
4,678

Restructuring and strategic transaction
 
5,093

 
1,370

 

 

 

Legal settlement
 

 

 

 
(2,500
)
 

Gain on sale of assets
 

 

 

 
(14,242
)
 

Total operating expenses
 
112,364

 
102,783

 
95,234

 
77,133

 
81,314

Income from operations
 
39,037

 
51,949

 
61,276

 
65,221

 
47,656

Other income
 
755

 
765

 
563

 
1,201

 
129

Income before income taxes
 
39,792

 
52,714

 
61,839

 
66,422

 
47,785

Provision for income taxes
 
(13,457
)
 
(12,296
)
 
(20,558
)
 
(21,753
)
 
(17,862
)
Net income
 
$
26,335

 
$
40,418

 
$
41,281

 
$
44,669

 
$
29,923

Net income per common share
 
 

 
 

 
 

 
 

 
 

Basic
 
$
1.72

 
$
2.75

 
$
2.90

 
$
3.23

 
$
2.20

Diluted
 
$
1.68

 
$
2.65

 
$
2.80

 
$
3.15

 
$
2.16

Weighted average number of shares
 
 

 
 

 
 

 
 

 
 

Basic
 
15,282

 
14,688

 
14,223

 
13,835

 
13,611

Diluted
 
15,647

 
15,274

 
14,725

 
14,161

 
13,855

Cash dividends per share
 
$

 
$

 
$

 
$

 
$

CASH FLOW DATA:
 
 

 
 

 
 

 
 

 
 

Total cash flows from operations
 
$
60,640

 
$
65,726

 
$
66,271

 
$
64,487

 
$
33,095

 
 
 
As of December 31,
 
 
(in thousands)
 
 
2014
 
2013
 
2012
 
2011
 
2010
BALANCE SHEET DATA:
 
 

 
 

 
 

 
 

 
 

Cash, cash equivalents and investment securities
 
$
346,764

 
$
296,891

 
$
226,159

 
$
159,985

 
$
93,357

Working capital
 
$
408,484

 
$
367,410

 
$
296,385

 
$
231,098

 
$
179,489

Total assets
 
$
541,102

 
$
499,643

 
$
428,512

 
$
361,112

 
$
309,644

Stockholders’ equity
 
$
508,252

 
$
464,725

 
$
390,857

 
$
320,577

 
$
271,704


22


Item 7.  Management’s Discussion and Analysis of Financial Condition and Results of Operations.

Business Overview

We are a leader in the development, manufacture and sale of innovative medical devices used in infusion therapy, oncology and critical care applications.  Our product line include needlefree connection devices, custom infusion sets, closed system transfer devices ("CSTD") for the handling of hazardous drugs, advanced sensor catheters, needlefree closed blood sampling systems, disposable pressure transducer systems and innovative hemodynamic monitoring systems.

Our products are used in acute care hospitals and ambulatory clinics in more than 60 countries throughout the world. We categorize our products into three main market segments: Infusion Therapy, Critical Care and Oncology. In prior periods, we included Tego needlefree hemodialysis connector and Lopez enteral valve under "Other". The Tego is now included under Infusion Therapy. The Lopez Valve is now included under Critical Care. Other reclassifications were done for certain items in the market segments in the prior periods. Our primary products include:

Infusion Therapy
Needlefree connector products
MicroClave and MicroClave Clear
Anti-Microbial MicroClave
Neutron
NanoClave
Clave
Custom infusion sets
Tego needlefree hemodialysis connector

Critical Care
Hemodynamic monitoring systems
Transpac disposable pressure transducers
Safeset closed needlefree blood conservation systems
Custom monitoring systems
Catheters
Advanced sensor catheters
Pulmonary artery thermodilution catheters
Central venous oximetry catheters
Multi-lumen central venous catheters
Custom angiography and interventional radiology kits
Lopez enteral valve
    
Oncology
ChemoLock CSTD and components
ChemoClave CSTD and components
Diana hazardous drug compounding system

Our largest customer is Hospira.  Hospira accounted for 36%, 39% and 42% of our worldwide revenues in 2014, 2013 and 2012, respectively. Our relationship with Hospira has been and will continue to be important for our growth.  Hospira has a significant share of the I.V. set market in the United States and provides us access to that market. We expect revenues from Hospira to remain a significant percentage of our revenues.

Revenues for 2014, 2013 and 2012 were $309.3 million, $313.7 million and $316.9 million, respectively. We currently sell our products to medical product manufacturers, independent distributors and through direct sales to the end user. Most of our independent distributors handle the full line of our products.  We sell our infusion administration and oncology products under two agreements with Hospira.  Under a 1995 agreement, Hospira purchases Clave products, principally bulk, non-sterile connectors and oncology products.  Under a 2001 agreement, we sell custom infusion sets to Hospira under a program referred to as SetSource.  Our 1995 and 2001 agreements with Hospira provide Hospira with conditional exclusive and nonexclusive rights to distribute all existing ICU Medical products worldwide with terms that extend through most of 2018. 

We believe that as healthcare providers continue to either consolidate or join major buying organizations, the success of our products will depend, in part, on our ability, either independently or through strategic relationships such as our Hospira relationship, to secure long-term contracts with large healthcare providers and major buying organizations.  As a result of this

23


marketing and distribution strategy we derive most of our revenues from a relatively small number of distributors and manufacturers.  The loss of a strategic relationship with a customer or a decline in demand for a manufacturing customer’s products could have a material adverse effect on our operating results.
 
We believe that achievement of our growth objectives worldwide will require increased efforts by us in sales and marketing and product development; however, there is no assurance that we will be successful in implementing our growth strategy. Product development or acquisition efforts may not succeed, and even if we do develop or acquire additional products, there is no assurance that we will achieve profitable sales of such products.  An adverse change in our relationship with Hospira, or a deterioration of Hospira’s position in the market, could have an adverse effect on us.  Increased expenditures for sales and marketing and product acquisition and development may not yield desired results when expected, or at all.  While we have taken steps to control these risks, there are certain risks that may be outside of our control, and there is no assurance that steps we have taken will succeed.

The following table sets forth, for the periods indicated, total revenues by market segment and its major product groups as a percentage of total revenues:
 
Product line
 
2014
 
2013
 
2012
Infusion therapy
 
70
%
 
71
%
 
71
%
Critical care
 
18
%
 
17
%
 
19
%
Oncology
 
12
%
 
12
%
 
9
%
Other
 
%
 
%
 
1
%
 
 
100
%
 
100
%
 
100
%
 
Seasonality/Quarterly Results
 
The healthcare business in the United States is subject to quarterly fluctuations due to frequency of illness during the seasons, elective procedures, and over the last few years, the economy. In Europe, the healthcare business generally slows down in the summer months due to vacations resulting in fewer elective surgeries.  In addition, we can experience fluctuations in net sales as a result of variations in the ordering patterns of our largest customers, which may be driven more by production scheduling and their inventory levels, and less by seasonality.  Our expenses often do not fluctuate in the same manner as net sales, which may cause fluctuations in operating income that are disproportionate to fluctuations in our revenue. 
Year-to-Year Comparisons
 
We present summarized income statement data in Item 6. Selected Financial Data. The following table shows, for the three most recent years, the percentages of each income statement caption in relation to revenues.
 
 
 
Percentage of Revenues
 
 
2014
 
2013
 
2012
Revenue
 
 

 
 

 
 

Net sales
 
100
%
 
100
%
 
100
%
Other
 
%
 
%
 
%
Total revenues
 
100
%
 
100
%
 
100
%
Gross margin
 
49
%
 
49
%
 
49
%
Selling, general and administrative expenses
 
29
%
 
28
%
 
27
%
Research and development expenses
 
6
%
 
4
%
 
3
%
Restructuring and transaction expense
 
1
%
 
%
 
%
Total operating expenses
 
36
%
 
32
%
 
30
%
Income from operations
 
13
%
 
17
%
 
19
%
Other income
 
%
 
%
 
%
Income before income taxes
 
13
%
 
17
%
 
19
%
Income taxes
 
4
%
 
4
%
 
6
%
Net income
 
9
%
 
13
%
 
13
%
 

24


Restructuring Charges and Strategic Transaction Expenses

In 2014, we reorganized our selling and corporate infrastructure, resulting in a reduction in workforce of 69 employees. The $3.5 million restructuring charge is presented as a separate line item on our statements of income and is combined with strategic transaction expenses. The restructuring charge is comprised of employee termination benefits and other associated costs. We have $1.4 million accrued for the restructuring charges as of December 31, 2014 and expect the majority of this accrual to be paid out in the first quarter of 2015.

In 2014, we incurred $1.6 million in charges associated with a strategic transaction that did not go forward. In 2013, we incurred $1.4 million in charges associated with a strategic transaction that did not go forward. Transaction expenses are presented on a separate line item on our statements of income and are combined with restructuring charges.


Comparison of 2014 to 2013
 
Revenues were $309.3 million in 2014, compared to $313.7 million in 2013.
 
Infusion Therapy:  Net infusion therapy sales were $216.0 million in 2014, a decrease of $5.0 million, or 2%, from 2013. Domestic infusion therapy sales were $155.4 million in 2014, a decrease of $9.8 million, or 6%, from 2013. The decrease in domestic infusion therapy sales was from $11.2 million in lower sales to Hospira, due to lower unit sales, partially offset by $1.4 million in higher domestic direct sales. International infusion therapy sales were $60.6 million in 2014, an increase of $4.8 million, or 9%, from 2013. The increase in international infusion therapy was primarily from higher unit sales and higher ASPs due to change in product mix outside of Europe.
   
Critical Care: Net critical care sales were $55.1 million in 2014, an increase of $0.8 million, or 1%, from 2013. Domestic critical care sales were $40.5 million in 2014, an increase of $0.1 million from 2013. International critical care sales were $14.5 million in 2014, an increase of $0.6 million, or 4%, from 2013 primarily due to higher unit sales and higher ASPs due to change in product mix outside of Europe.

Oncology: Net oncology sales were $36.9 million in 2014, a decrease of $0.2 million from 2013. Domestic oncology sales were $15.7 million in 2014, a decrease of $0.6 million, or 4%, from 2013. The decrease in domestic oncology was from $2.2 million in lower sales to Hospira in the United States, partially offset by $1.6 million in increased direct sales from higher unit sales. International oncology sales were $21.2 million in 2014, an increase of $0.5 million, or 2%, from 2013, due to a $1.2 million increase in European oncology sales due to higher unit sales, partially offset by $0.8 million in lower international oncology sales outside of Europe due to lower unit sales.

Gross margins for 2014 and 2013 were 49.0% and 49.3%, respectively.  The decrease in gross margin was due to unfavorable change in product mix and temporary rework of one of our product lines, partially offset by lower logistic expenses.

Selling, general and administrative ("SG&A") expenses were $88.9 million, or 29% of revenues, in 2014 compared with $89.0 million, or 28%, of revenues in 2013.  The $3.8 million increase in stock compensation expense was offset by lower sales and marketing compensation and benefits and travel expenses. The lower sales and marketing expenses are primarily due to the restructuring of the U.S. sales organization in the third quarter of 2014.
 
Research and development ("R&D") expenses were $18.3 million, or 6% of revenue, in 2014 compared to $12.4 million, or 4%, of revenue in 2013.  The increase in R&D expenses was primarily from increased compensation and benefit expenses from an increase in R&D employees and increased external R&D project expenses.

Restructuring and strategic transaction expenses were $5.1 million, or 1% of revenues, in 2014 compared to $1.4 million in 2013. In 2014, we reorganized our selling and corporate infrastructure, resulting in a reduction in workforce of 69 employees. The $3.5 million restructuring charge is comprised of employee termination benefits and other associated costs.

In 2014, we incurred $1.6 million in charges associated with a strategic transaction that did not go forward. In 2013, we incurred $1.4 million in charges associated with a strategic transaction that did not go forward.

Other income was $0.8 million in 2014 and in 2013


25


Income taxes were accrued at an estimated annual effective tax rate of 34% in 2014 compared to 23% in 2013.  The rate differed from the statutory corporate rate of 35% principally because of the effect of foreign and state income taxes, tax credits, deductions for domestic production activities and discrete tax items related to the conclusion of state tax examinations.

Comparison of 2013 to 2012
 
Revenues were $313.7 million in 2013, compared to $316.9 million in 2012.
  
Infusion Therapy:  Net infusion therapy sales were $221.0 million in 2013, a decrease of $5.1 million, or 2%, from 2012. Domestic infusion therapy sales were $165.2 million in 2013, a decrease of $10.9 million, or 6%, from 2013. The decrease in domestic infusion therapy sales was from $12.8 million in lower sales to Hospira in the United States, due to lower unit sales, partially offset by $1.9 million in higher domestic direct sales. International infusion therapy sales were $55.8 million in 2013, an increase of $5.8 million, or 12%, from 2012. The increase in international infusion therapy was from higher unit sales and higher ASPs due to change in product mix inside and outside of Europe.
   
Critical Care: Net critical care sales were $54.3 million in 2013, a decrease of $4.6 million, or 8%, from 2012. Domestic critical care sales were $40.4 million, a decrease of $3.9 million, or 9%, from 2012. International sales were $13.9 million, a decrease of $0.7 million, or 5%, from 2012. The decrease was primarily due to domestic and international competition.

Oncology: Net oncology sales were $37.1 million in 2013, an increase of $7.1 million, or 24%, from 2012. Domestic oncology sales were $16.3 million in 2013, an increase of $1.0 million, or 7%, from 2012. International oncology sales were $20.8 million in 2013, an increase of $6.1 million, or 42%, from 2012, consisting of a $4.2 million increase in European oncology sales and a $1.9 million increase in international sales outside of Europe, both due to higher unit sales.
 
Gross margins for 2013 and 2012 were 49.3% and 49.4%, respectively.  Our lower freight expense contributed approximately 0.5% to our gross margin and was offset by lower manufacturing overhead absorption.

SG&A expenses were 89.0 million, or 28%, of revenues in 2013, compared with $84.6 million, or 27%, of revenues in 2012.  The medical device tax, which became effective in 2013, contributed $1.8 million to the SG&A increase in 2013 compared to 2012. Information technology expenses increased $1.1 million and bad debt /warranty reserves increased $0.7 million in 2013 compared to 2012.
 
R&D expenses were $12.4 million, or 4%, of revenue in 2013 compared to $10.6 million, or 3%, of revenue in 2012.  The increase in R&D expenses was primarily from increased compensation and benefits from an increase of six R&D employees and increased R&D project expenses.

Other income was $0.8 million in 2013 compared to $0.6 million in 2012

Income taxes were accrued at an estimated annual effective tax rate of 23% in 2013 compared to 33% in 2012.  The effective tax rate differs from that computed at the federal statutory rate of 35% principally because of the effect of foreign and state income taxes, tax credits, deductions for domestic production activities and discrete tax items, including the tax effects of the extension of the federal research and development credit for the 2012 tax year and changes in Mexican tax legislation both enacted in 2013.

Liquidity and Capital Resources
 
During 2014, our cash, cash equivalents and investment securities increased by $49.9 million from $296.9 million at December 31, 2013 to $346.8 million at December 31, 2014.
 
Operating Activities: Our cash provided by operating activities tends to increase over time because of our positive operating results.  However, it is subject to fluctuations, principally from changes in net income, accounts receivable, inventories and the timing of tax payments.
 
Our cash provided by operations was $60.6 million in 2014. Net income plus adjustments for non-cash net expenses contributed $57.2 million to cash provided by operations. Changes in operating assets and liabilities contributed $3.4 million to cash provided by operating activities. The $4.9 million decrease in accounts receivable was the largest change in operating assets and liabilities and was primarily from improved days sales outstanding.
 

26


Investing Activities:  Our cash used by investing activities was $21.8 million in 2014, which was primarily comprised of $16.6 million in capital purchases offset by net investment sales of $4.2 million. Our property, plant and equipment purchases were primarily for the plant expansion, machinery, equipment and mold additions in our Salt Lake City plant, machinery and equipment additions in our Mexico plant and investments in IT that benefit world-wide operations.
 
While we can provide no assurances, we estimate that our capital expenditures in 2015 will approximate $12.0 million to $14.0 million. We anticipate making additional investments in molds, machinery and equipment in our manufacturing operations in the United States and Mexico to support new and existing products and in IT to benefit world-wide operations.  We expect to use our cash and investments to fund our capital purchases.  Amounts of spending are estimates and actual spending may substantially differ from those amounts.
 
Financing Activities:  Our cash provided by financing activities was $19.3 million in 2014. Cash provided by the exercise of stock options and shares purchased by our employees under the employee stock purchase plan was $19.5 million, resulting in 576,647 shares issued to our employees and directors. The tax benefits from share awards was $5.7 million in 2014, which fluctuates based principally on when employees choose to exercise their vested stock options. In 2014, we withheld 4,232 shares of our common stock from vested restricted stock units as consideration for making $0.2 million in payments for the employee's share award tax withholding obligations.

In July 2010, our Board of Directors approved a new share purchase plan to purchase up to $40.0 million of our common stock.  In 2014, we purchased 88,792 shares of our common stock for $5.6 million. To date, we have purchased $17.5 million of our stock from this plan, leaving a balance of $22.5 million available for future purchases. This plan has no expiration date.
 
We have a substantial cash and investment security position generated from profitable operations and stock sales, principally from the exercise of employee stock options.  We maintain this position to fund our growth, meet increasing working capital requirements, fund capital expenditures, buy back our common stock on an opportunistic basis and to take advantage of acquisition opportunities that may arise.  Our primary investment goal is capital preservation.

As of December 31, 2014, we have $27.2 million of cash and cash equivalents held outside of the United States, the majority of which is available to fund foreign operations and obligations.
 
We believe that our existing cash, cash equivalents and investment securities along with funds expected to be generated from future operations will provide us with sufficient funds to finance our current operations for the next twelve months.  In the event that we experience illiquidity in our investment securities, downturns or cyclical fluctuations in our business that are more severe or longer than anticipated or if we fail to achieve anticipated revenue and expense levels, we may need to obtain or seek alternative sources of capital or financing, and we can provide no assurances that the terms of such capital or financing will be available to us on favorable terms, if at all.
 
Critical Accounting Policies
 
Our significant accounting policies are summarized in Note 1 to the Consolidated Financial Statements.  In preparing our financial statements, we make estimates and assumptions that affect the expected amounts of assets and liabilities and disclosure of contingent assets and liabilities. We apply our accounting policies on a consistent basis. As circumstances change, they are considered in our estimates and judgments, and future changes in circumstances could result in changes in amounts at which assets and liabilities are recorded.
 
Investment securities:  Investment securities consist of certificates of deposits, corporate bonds and tax-exempt state and municipal government debt which are classified as available-for-sale.  See Item 7A, Quantitative and Qualitative Disclosures about Market Risk.  Under our current investment policies, our available for sale securities have no significant difference between the fair value and amortized cost.  If there were to be a significant difference, this amount would be reflected as a separate component of stockholders’ equity.  Unrealized gains and losses on items for which the fair value option has been elected are reported in earnings at each subsequent reporting date.
 
Revenue recognition:  We record sales and related costs when ownership of the product transfers to the customer, persuasive evidence of an arrangement exists, collectability is reasonably assured and the sales price is determinable. Under the terms of all our purchase orders, ownership transfers on shipment. If there are significant doubts at the time of shipment as to the collectability of the receivable, we defer recognition of the sale in revenue until the receivable is collected. Our customers are medical product manufacturers, distributors and end-users. Our only post-sale obligations are warranty and certain rebates. We warrant products against defects and have a policy permitting the return of defective products. We accrue for warranty and

27


product returns based on historical experience. We accrue rebates as a reduction in revenue based on agreements and historical experience.
 
Accounts receivable:  Accounts receivable are stated at net realizable value. An allowance is provided for estimated collection losses based on the age of the receivable or on specific past due accounts for which we consider collection to be doubtful. We rely on prior payment trends, financial status and other factors to estimate the cash which ultimately will be received. Such amounts cannot be known with certainty at the financial statement date. We regularly review individual past due balances for collectability. Loss exposure is principally with international customers for whom normal payment terms are long in comparison to those of our other customers and, to a lesser extent, domestic distributors. Many of these distributors are relatively small and we are vulnerable to adverse developments in their businesses that can hinder our collection of amounts due. If actual collection losses exceed expectations, we could be required to accrue additional bad debt expense, which could have an adverse effect on our operating results in the period in which the accrual occurs.
 
Inventories:  Inventories are stated at the lower of cost (first in, first out) or market. We need to carry many components to accommodate our rapid product delivery, and if we mis-estimate demand or if customer requirements change, we may have components in inventory that we may not be able to use. Most finished products are made only after we receive orders except for certain standard (non-custom) products which we will carry in inventory in expectation of future orders. For finished products in inventory, we need to estimate what may not be saleable. We regularly review inventory and reserve for slow moving items, and write off all items that we do not expect to use in manufacturing, and finished products that we do not expect to sell. If actual usage of components or sales of finished goods inventory is less than our estimates, we could be required to write off additional inventory, which could have an adverse effect on our operating results in the period in which the write-off occurs.

Property and equipment/depreciation:  Property and equipment is carried at cost and depreciated on the straight-line method over the estimated useful lives. The estimates of useful lives are significant judgments in accounting for property and equipment, particularly for molds and automated assembly machines that are custom made for us. We may retire them on an accelerated basis if we replace them with larger or more technologically advanced tooling. The remaining useful lives of all property and equipment are reviewed regularly and lives are adjusted or assets written off based on current estimates of future use. As part of that review, property and equipment is reviewed for other indicators of impairment. An unexpected shortening of useful lives of property and equipment that significantly increases depreciation provisions, or other circumstances causing us to record an impairment loss on such assets, could have an adverse effect on our operating results in the period in which the related charges are recorded.

Income Taxes: We utilize the liability method of accounting for income taxes as set forth in ASC 740. Under the liability method, deferred taxes are determined based on the temporary differences between the financial statement and tax basis of assets and liabilities using tax rates expected to be in effect during the years in which the basis differences reverse. A valuation allowance is recorded when it is more likely than not that some of the deferred tax assets will not be realized. In determining the need for valuation allowances we consider projected future taxable income and the availability of tax planning strategies. If in the future we determine that we would not be able to realize our recorded deferred tax assets, an increase in the valuation allowance would be recorded, decreasing earnings in the period in which such determination is made.

We are subject to income taxes throughout the United States and in numerous foreign jurisdictions. We recognize the financial statement benefits for uncertain tax positions as set forth in ASC 740 only if it is more-likely-than-not to be sustained in the event of challenges by relevant taxing authorities based on the technical merit of each tax position. The amounts of uncertain tax positions recognized are the largest benefits that have a greater than 50 percent likelihood of being realized upon settlement with the relevant tax authorities.
New Accounting Pronouncements
 
See Note 1 of the Consolidated Financial Statements in this Annual Report on Form 10-K.
 
Off Balance Sheet Arrangements
 
In the normal course of business, we have agreed to indemnify our officers and directors to the maximum extent permitted under Delaware law and to indemnify customers as to certain intellectual property matters related to sales of our products.  There is no maximum limit on the indemnification that may be required under these agreements.  Although we can provide no assurances, we have never incurred, nor do we expect to incur, any liability for indemnification.
 

28


Contractual Obligations
 
We have contractual obligations, at December 31, 2014, of approximately the amount set forth in the table below. This amount excludes inventory-related purchase orders for goods and services for current delivery. The majority of our inventory purchase orders are blanket purchase orders that represent an estimated forecast of goods and services. We do not have a commitment liability on the blanket purchase orders. Since we do not have the ability to separate out blanket purchase orders from non-blanket purchase orders for inventory-related goods and services for current delivery, amounts related to such purchase orders are excluded from the table below. We have excluded from the table below pursuant to ASC 740-10-25 (formerly FIN 48), an interpretation of ASC 740-10 (formerly SFAS 109), a non-current income tax liability of $2.7 million due to the high degree of uncertainty regarding the timing of future cash outflows associated with the liabilities.

 
 
 
Contractual Obligations
 
Total
 
2015
 
2016
 
2017
Operating leases
 
$
342

 
$
279

 
$
63

 
$

Warehouse service agreements
 
1,437

 
619

 
613

 
205

Purchase obligations
 
5,115

 
5,115

 

 

Other contractual obligations
 
29

 
13

 
13

 
3

 
 
$
6,923

 
$
6,026

 
$
689

 
$
208


Forward Looking Statements

Various portions of this Annual Report on Form 10-K, including this Management’s Discussion and Analysis of Financial Condition and Results of Operations, describe trends in our business and finances that we perceive and state some of our expectations and beliefs about our future. These statements about the future are “forward looking statements,” within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended, and we identify them by using words such as “anticipate,” “believe,” “expect,” “estimate,” “intend,” “plan,” “will,” “continue,” “could,” “may,” and by similar expressions and statements about aims, goals and plans. The forward looking statements are based on the best information currently available to us and assumptions that we believe are reasonable, but we do not intend the statements to be representations as to future results. They include, without limitation, statements about:
 
future growth; future operating results and various elements of operating results, including future expenditures and effects with respect to sales and marketing and product development and acquisition efforts; future sales and unit volumes of products; expected increases and decreases in sales; deferred revenue; accruals for restructuring charges, future license, royalty and revenue share income; production costs; gross margins; litigation expense; future SG&A and R&D expenses; manufacturing expenses; future costs of expanding our business; income; losses; cash flow; amortization; source of funds for capital purchases and operations; future tax rates; alternative sources of capital or financing; changes in working capital items such as receivables and inventory; selling prices; and income taxes;

factors affecting operating results, such as shipments to specific customers; reduced dependence on current proprietary products; loss of a strategic relationship; change in demand; domestic and international sales; expansion in international markets, selling prices; future increases or decreases in sales of certain products and in certain markets and distribution channels; maintaining strategic relationships and securing long-term and multi-product contracts with large healthcare providers and major buying organizations; increases in systems capabilities; introduction, development and sales of new products; benefits of our products over competing systems; qualification of our new products for the expedited Section 510(k) clearance procedure; possibility of lengthier clearance process for new products; planned increases in marketing; warranty claims; rebates; product returns; bad debt expense; amortization expense; inventory requirements; lives of property and equipment; manufacturing efficiencies and cost savings; unit manufacturing costs; establishment or expansion of production facilities inside or outside of the United States; planned new orders for semi-automated or fully automated assembly machines for new products; adequacy of production capacity; results of R&D; our plans to repurchase shares of our common stock; asset impairment losses; relocation of manufacturing facilities and personnel; effect of expansion of manufacturing facilities on production efficiencies and resolution of production inefficiencies; the effect of costs to customers and delivery times; business seasonality and fluctuations in quarterly results; customer ordering patterns and the effects of new accounting pronouncements; and

new or extended contracts with manufacturers and buying organizations; dependence on a small number of customers; loss of larger distributors and the ability to locate other distributors; future sales to and revenues from Hospira and the importance of Hospira to our growth; effect of the current relationship with Hospira, including its effect on future

29


revenues and our positioning with respect to new product introductions and market share; growth of our Clave products in future years; design features of Clave products; the outcome of our strategic initiatives; regulatory approvals and compliance; outcome of litigation; patent protection and intellectual property landscape; patent infringement claims and the impact of newly issued patents on other medical devices; competitive and market factors, including continuing development of competing products by other manufacturers; improved production processes and higher volume production; innovation requirements; consolidation of the healthcare provider market and downward pressure on selling prices; distribution or financial capabilities of competitors; healthcare reform legislation; use of treasury stock; working capital requirements; liquidity and realizable value of our investment securities; future investment alternatives; foreign currency denominated financial instruments; foreign exchange risk; commodity price risk; our expectations regarding liquidity and capital resources over the next twelve months; capital expenditures; plans to convert existing space; acquisitions of other businesses or product lines, indemnification liabilities and contractual liabilities.

 
Forward looking statements involve certain risks and uncertainties, which may cause actual results to differ materially from those discussed in each such statement.  First, one should consider the factors and risks described in the statements themselves or otherwise discussed herein. Those factors are uncertain, and if one or more of them turn out differently than we currently expect, our operating results may differ materially from our current expectations.
 
Second, investors should read the forward looking statements in conjunction with the Risk Factors discussed in Item 1A of this Annual Report on Form 10-K.  Also, actual future operating results are subject to other important factors and risks that we cannot predict or control, including without limitation, the following:

general economic and business conditions, both in the United States and internationally;
unexpected changes in our arrangements with Hospira or our other large customers;
outcome of litigation;
fluctuations in foreign exchange rates and other risks of doing business internationally;
increases in labor costs or competition for skilled workers;
increases in costs or availability of the raw materials need to manufacture our products;
the effect of price and safety considerations on the healthcare industry;
competitive factors, such as product innovation, new technologies, marketing and distribution strength and price erosion;
the successful development and marketing of new products;
unanticipated market shifts and trends;
the impact of legislation affecting government reimbursement of healthcare costs;
changes by our major customers and independent distributors in their strategies that might affect their efforts to market our products;
the effects of additional governmental regulations;
unanticipated production problems; and
the availability of patent protection and the cost of enforcing and of defending patent claims.
 
The forward looking statements in this report are subject to additional risks and uncertainties, including those detailed from time to time in our other filings with the Securities and Exchange Commission. These forward-looking statements are made only as of the date hereof and, except as required by law, we undertake no obligation to update or revise any of them, whether as a result of new information, future events or otherwise.

Item 7A.  Quantitative and Qualitative Disclosures about Market Risk.
 
Financial Market Risk

We had a portfolio of government bonds, corporate bonds and certificates of deposit of $71.0 million as of December 31, 2014.  The securities are all “investment grade,” comprised of $14.7 million of pre-refunded municipal securities, $0.4 million of non-pre-refunded municipal securities, $46.2 million in corporate bonds, $3.8 million in commercial paper and $5.9 million of certificates of deposit.  The pre-refunded municipal securities are fully escrowed by U.S. government Treasury bills with low market risk.
 
Our future earnings are subject to potential increase or decrease because of changes in short-term interest rates. Generally, each one-percentage point change in the interest rate will cause our overall yield to change by two-thirds to three-quarters of a percentage point, depending upon the relative mix of our portfolio and market conditions specific to the securities in which we invest.  Two-thirds to three-quarters of a percentage point change in our earnings on investment securities would create a change of approximately $0.5 million to investment income based on the average investment securities balance for the year ended December 31, 2014.
 
Foreign Exchange Risk

We have foreign currency exchange risk related to foreign-denominated cash, short-term investments, accounts receivable and accounts payable. In our European operations, our net Euro asset position at December 31, 2014 was approximately €20.4 million. We also have approximately €54.8 million in Euro denominated cash and investment accounts held by our corporate entity. A 10% change in the conversion of the Euro to the U.S. dollar for our cash and investments, accounts receivable, accounts payable and accrued liabilities from the December 31, 2014 spot rate would impact our consolidated amounts on these balance sheet items by approximately $9.1 million, or 2.6% of these net assets. We expect that in the future, with the growth of our European distribution operation, that net Euro denominated instruments will continue to increase. We currently do not hedge our foreign currency exposures.

Sales from the United States to foreign distributors are denominated in U.S. dollars. We have manufacturing, sales and distribution facilities in several countries and we conduct business transactions denominated in various foreign currencies, although principally the Euro and Mexican Peso. A 10% change in the conversion of the Mexican Peso to the U.S. dollar from the average exchange rate we experienced in 2014 and our manufacturing spending from 2014 would have impacted our cost of goods sold by approximately $2.4 million

Commodity Risk

Our exposure to commodity price changes relates primarily to certain manufacturing operations that use resin. We manage our exposure to changes in those prices through our procurement and supply chain management practices and the effect of price changes has not been material to date.  Based on our average price for resin in fiscal year 2014, a 10% increase to the price of resin would have resulted in approximately a $1.2 million change in material cost.


30


Item 8.  Financial Statements and Supplementary Data.

[THE REMAINDER OF THIS PAGE IS INTENIONALLY LEFT BLANK]
 



31



REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders of
ICU Medical, Inc.
San Clemente, CA

We have audited the accompanying consolidated balance sheets of ICU Medical, Inc. and subsidiaries (the “Company”) as of December 31, 2014 and 2013, and the related consolidated statements of income, comprehensive income, stockholders' equity, and cash flows for each of the three years in the period ended December 31, 2014. Our audits also included the financial statement schedule listed in the Index at Item 15. These consolidated financial statements and financial statement schedule are the responsibility of the Company's management. Our responsibility is to express an opinion on the consolidated financial statements and financial statement schedule based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the consolidated financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, such consolidated financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2014 and 2013, and the results of their operations and their cash flows for each of the three years in the period ended December 31, 2014, in conformity with accounting principles generally accepted in the United States of America. Also, in our opinion, such financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.

We have also audited in accordance with the standards of the Public Company Accounting Oversight Board (United States), the Company's internal control over financial reporting as of December 31, 2014, based on the criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated February 20, 2015 expressed an unqualified opinion on the Company's internal control over financial reporting.

/s/ Deloitte & Touche, LLP
 
 
 
Costa Mesa, California
 
February 20, 2015
 

32


ICU MEDICAL, INC. AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS
(Amounts in thousands, except per share data)
 
 
December 31,
 
2014
 
2013
ASSETS
 
 
 
CURRENT ASSETS:
 
 
 
Cash and cash equivalents
$
275,812

 
$
226,022

Investment securities
70,952

 
70,869

Cash, cash equivalents and investment securities
346,764

 
296,891

Accounts receivable, net of allowance for doubtful accounts of $1,127 and $1,208 at December 31, 2014 and 2013, respectively
39,051

 
45,318

Inventories
36,933

 
34,451

Prepaid income taxes
3,963

 
5,966

Prepaid expenses and other current assets
5,818

 
7,319

Deferred income taxes
4,683

 
4,351

Total current assets
437,212

 
394,296

 
 
 
 
PROPERTY AND EQUIPMENT, net
86,091

 
87,861

GOODWILL
1,478

 
1,478

INTANGIBLE ASSETS, net
7,063

 
8,490

DEFERRED INCOME TAXES
9,258

 
7,518

 
$
541,102

 
$
499,643

LIABILITIES AND STOCKHOLDERS’ EQUITY
 

 
 

CURRENT LIABILITIES:
 

 
 

Accounts payable
$
11,378

 
$
11,335

Accrued liabilities
17,350

 
15,551

Total current liabilities
28,728

 
26,886

 
 
 
 
DEFERRED INCOME TAXES
1,376

 
3,630

INCOME TAX LIABILITY
2,746

 
4,402

COMMITMENTS AND CONTINGENCIES

 

STOCKHOLDERS’ EQUITY:
 

 
 

Convertible preferred stock, $1.00 par value Authorized—500 shares; Issued and outstanding— none

 

Common stock, $0.10 par value — Authorized—80,000 shares; Issued 15,595 shares at December 31, 2014 and 15,103 at December 31, 2013, outstanding 15,595 shares at December 31, 2014 and 15,102 shares at December 31, 2013
1,559

 
1,510

Additional paid-in capital
107,336

 
78,495

Treasury stock, at cost — 0 shares at December 31, 2014 and 1 shares at December 31, 2013

 
(49
)
Retained earnings
408,911

 
382,576

Accumulated other comprehensive income (loss)
(9,554
)
 
2,193

Total stockholders’ equity
508,252

 
464,725

 
$
541,102

 
$
499,643


The accompanying notes are an integral part of these consolidated financial statements.

33


ICU MEDICAL, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF INCOME
(Amounts in thousands, except per share data)

 
Year ended December 31,
 
2014
 
2013
 
2012
REVENUES:
 

 
 

 
 
Net sales
$
308,770

 
$
313,056

 
$
316,322

Other
490

 
660

 
547

TOTAL REVENUE
309,260

 
313,716

 
316,869

COST OF GOODS SOLD
157,859

 
158,984

 
160,359

Gross profit
151,401

 
154,732

 
156,510

OPERATING EXPENSES:
 

 
 

 
 
Selling, general and administrative
88,939

 
89,006

 
84,604

Research and development
18,332

 
12,407

 
10,630

Restructuring and strategic transaction
5,093

 
1,370

 

Total operating expenses
112,364

 
102,783

 
95,234

Income from operations
39,037

 
51,949

 
61,276

OTHER INCOME
755

 
765

 
563

Income before income taxes
39,792

 
52,714

 
61,839

PROVISION FOR INCOME TAXES
(13,457
)
 
(12,296
)
 
(20,558
)
NET INCOME
$
26,335

 
$
40,418

 
$
41,281

NET INCOME PER SHARE
 

 
 

 
 
Basic
$
1.72

 
$
2.75

 
$
2.90

Diluted
$
1.68

 
$
2.65

 
$
2.80

WEIGHTED AVERAGE NUMBER OF SHARES
 

 
 

 
 
Basic
15,282

 
14,688

 
14,223

Diluted
15,647

 
15,274

 
14,725

 
The accompanying notes are an integral part of these consolidated financial statements.

34


ICU MEDICAL, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME
(Amounts in thousands)

 
 
Year ended December 31,
 
 
2014
 
2013
 
2012
 
Net income
$
26,335

 
$
40,418

 
$
41,281

 
Other comprehensive income (loss), net of tax of ($3,129), $803 and $281 for the years ended December 31, 2014, 2013 and 2012, respectively:
 

 
 

 
 

 
Foreign currency translation adjustment
(11,747
)
 
3,622

 
1,805

 
Comprehensive income
$
14,588

 
$
44,040

 
$
43,086

 
 
The accompanying notes are an integral part of these consolidated financial statements.


ICU MEDICAL, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY
(Amounts in thousands)
 
 
Common Stock
 
 
 
 
 
 
 
Accumulated
 
 
 
 
 
 
 
 
Additional
 
 
 
 
 
Other
 
 
 
 
Shares
 
Amount
 
Paid-In
Capital
 
Treasury
Stock
 
Retained
Earnings
 
Comprehensive
Income (Loss)
 
Total
Balance, December 31, 2011
 
13,871

 
$
1,486

 
$
56,796

 
$
(35,348
)
 
$
300,877

 
$
(3,234
)
 
$
320,577

Exercise of stock options, including excess income tax benefits of $4,567
 
526

 

 
1,348

 
18,063

 

 

 
19,411

Proceeds from employee stock purchase plan
 
61

 

 
63

 
2,157

 

 

 
2,220

Stock compensation
 

 

 
5,563

 

 

 

 
5,563

Foreign currency translation adjustment
 

 

 

 

 

 
1,805

 
1,805

Net income
 

 

 

 

 
41,281

 

 
41,281

Balance, December 31, 2012
 
14,458

 
1,486

 
63,770

 
(15,128
)
 
342,158

 
(1,429
)
 
390,857

Issuance of restricted stock and exercise of stock options, including excess income tax benefits of $6,966
 
733

 
24

 
2,030

 
22,916

 

 

 
24,970

Treasury stock acquired in lieu of cash payment on stock option exercises and income tax withholding obligations
 
(140
)
 
 
 
6,678

 
(9,711
)
 
 
 
 
 
(3,033
)
Proceeds from employee stock purchase plan
 
51

 

 
583

 
1,874

 

 

 
2,457

Stock compensation
 

 

 
5,434

 

 

 

 
5,434

Foreign currency translation adjustment
 

 

 

 

 

 
3,622

 
3,622

Net income
 

 

 

 

 
40,418

 

 
40,418

Balance, December 31, 2013
 
15,102

 
1,510

 
78,495

 
(49
)
 
382,576

 
2,193

 
464,725

Issuance of restricted stock and exercise of stock options, including excess income tax benefits of $5,700
 
544

 
48

 
18,528

 
4,122

 

 

 
22,698

Purchase of treasury stock, treasury stock acquired in lieu of cash payment on stock option exercises and income tax withholding obligations
 
(98
)
 

 
285

 
(6,121
)
 
 
 
 
 
(5,836
)
Proceeds from employee stock purchase plan
 
47

 
1

 
436

 
2,048

 

 

 
2,485

Stock compensation
 

 

 
9,592

 

 

 

 
9,592

Foreign currency translation adjustment
 

 

 

 

 

 
(11,747
)
 
(11,747
)
Net income
 

 

 

 

 
26,335

 

 
26,335

Balance, December 31, 2014
 
15,595

 
$
1,559

 
$
107,336

 
$

 
$
408,911

 
$
(9,554
)
 
$
508,252

 The accompanying notes are an integral part of these consolidated financial statements.
ICU MEDICAL, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF CASH FLOWS
(Amounts in thousands)
 
 
Year ended December 31,
 
2014
 
2013
 
2012
CASH FLOWS FROM OPERATING ACTIVITIES:
 

 
 

 
 
Net income
$
26,335

 
$
40,418

 
$
41,281

Adjustments to reconcile net income to net cash provided by operating activities:
 

 
 

 
 
Depreciation and amortization
19,447

 
19,506

 
19,001

Provision for doubtful accounts
34

 
185

 
(237
)
Provision for warranty and returns
(360
)
 
671

 
220

Stock compensation
9,592

 
5,434

 
5,563

Loss (gain) on disposal of property and equipment
8

 
(36
)
 
212

Bond premium amortization
2,188

 
2,715

 
2,585

Changes in operating assets and liabilities:
 

 
 

 
 
Accounts receivable
4,912

 
3,556

 
(5,395
)
Inventories
(3,836
)
 
2,319

 
4,573

Prepaid expenses and other assets
1,970

 
(383
)
 
(415
)
Accounts payable
(621
)
 
(31
)
 
(1,536
)
Accrued liabilities
2,344

 
(2,215
)
 
1,199

Income taxes, including excess tax benefits and deferred income taxes
(1,373
)
 
(6,413
)
 
(780
)
Net cash provided by operating activities
60,640

 
65,726

 
66,271

CASH FLOWS FROM INVESTING ACTIVITIES:
 

 
 

 
 
Purchases of property and equipment
(16,604
)
 
(18,415
)
 
(19,160
)
Proceeds from sale of assets
5

 
49

 
10

Intangible asset additions
(989
)
 
(1,080
)
 
(1,145
)
Purchases of investment securities
(93,588
)
 
(86,022
)
 
(98,876
)
Proceeds from sale of investment securities
89,426

 
92,348

 
77,798

Net cash used by investing activities
(21,750
)
 
(13,120
)
 
(41,373
)
CASH FLOWS FROM FINANCING ACTIVITIES:
 

 
 

 
 
Proceeds from exercise of stock options
16,998

 
18,004

 
14,844

Proceeds from employee stock purchase plan
2,485

 
2,457

 
2,220

Tax benefits from exercise of stock options
5,700

 
6,966

 
4,567

Purchase of treasury stock
(5,836
)
 
(3,033
)
 

Net cash provided by financing activities
19,347

 
24,394

 
21,631

Effect of exchange rate changes on cash
(8,447
)
 
2,122

 
781

NET INCREASE IN CASH AND CASH EQUIVALENTS
49,790

 
79,122

 
47,310

CASH AND CASH EQUIVALENTS, beginning of period
226,022

 
146,900

 
99,590

CASH AND CASH EQUIVALENTS, end of period
$
275,812

 
$
226,022

 
$
146,900

 
 
 
 
 
 
SUPPLEMENTAL DISCLOSURE OF CASH FLOW INFORMATION
 
 
 
 
 
  Cash paid during the year for income taxes
$
8,668

 
$
12,172

 
$
16,741

NON-CASH INVESTING ACTIVITIES
 
 
 
 
 
  Accrued liabilities for property and equipment
$
789

 
$
212

 
$
427

 
The accompanying notes are an integral part of these consolidated financial statements.
ICU MEDICAL, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
YEARS ENDED DECEMBER 31, 2014, 2013 and 2012
(Amounts in tables in thousands, except share and per share data)

Note 1:       General and Summary of Significant Accounting Policies
 
a.    Description of Business/Basis of Presentation
 
ICU Medical, Inc., a Delaware corporation, operates in one business segment engaged in the development, manufacturing and sale of innovative medical technologies used in infusion therapy, oncology and critical care applications.  Our devices are sold directly or to distributors and medical product manufacturers throughout the United States and internationally.  The manufacturing for all product groups occurs in Salt Lake City, Slovakia and Mexico. Assets and operating expenses are not allocated to individual product groups.

All subsidiaries are wholly owned and are included in the consolidated financial statements.  All intercompany balances and transactions have been eliminated.

The accompanying consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States of America ("GAAP").

b.     Cash and Cash Equivalents
 
Cash equivalents are investments with an original maturity of three months or less.

c.                  Accounts Receivable
 
Accounts receivable are stated at net realizable value.  An allowance is provided for estimated collection losses based on an assessment of various factors.  We consider prior payment trends, the age of the accounts receivable balances, financial status and other factors to estimate the cash which ultimately will be received.  Such amounts cannot be known with certainty at the financial statement date.  We regularly review individual past due balances for collectability.
 
d.                   Inventories
 
Inventories are stated at the lower of cost or market with cost determined using the first-in, first-out method.  Inventory costs include material, labor and overhead related to the manufacturing of medical devices.
 
Inventories consist of the following at December 31:
 
 
2014
 
2013
Raw material
$
23,006

 
$
21,867

Work in process
3,546

 
2,749

Finished goods
10,381

 
9,835

Total
$
36,933

 
$
34,451


35


 e.               Property and Equipment
 
Property and equipment consist of the following at December 31: 
 
2014
 
2013
Machinery and equipment
$
90,744

 
$
84,317

Land, building and building improvements
71,415

 
64,238

Molds
33,166

 
30,813

Computer equipment and software
23,228

 
21,625

Furniture and fixtures
3,571

 
3,552

Construction in progress
2,590

 
8,456

Total property and equipment, cost
224,714

 
213,001

Accumulated depreciation
(138,623
)
 
(125,140
)
Net property and equipment
$
86,091

 
$
87,861


All property and equipment are stated at cost.  We use the straight-line method for depreciating property and equipment over their estimated useful lives.  Estimated useful lives are:
Buildings
15 - 30 years
Building improvements
15 years
Machinery and equipment
2 - 10 years
Furniture, fixtures and molds
2 - 5 years
Computer equipment and software
3 - 5 years
 
We capitalize expenditures that materially increase the life of the related assets; maintenance and repairs are expensed as incurred.  The costs and related accumulated depreciation applicable to property and equipment sold or retired are removed from the accounts and any gain or loss is reflected in the statements of income at the time of disposal. Depreciation expense was $17.0 million, $17.0 million and $16.4 million in the years ended December 31, 2014, 2013 and 2012, respectively.

The cost of property and equipment are presented net of government incentive reimbursements we received from the Slovakian government for building a manufacturing plant in their country. Government incentives recorded in property and equipment were $3.3 million at December 31, 2014 and $3.7 million December 31, 2013.
 
f.         Goodwill
 
We test goodwill for impairment on an annual basis in the month of November. If the carrying amount of goodwill exceeds the implied estimated fair value, an impairment charge to current operations is recorded to reduce the carrying value to the implied estimated fair value.   There were no goodwill additions or impairment charges in the years ended December 31, 2014 and 2013.
  
g.                     Intangible Assets
 
Intangible assets, carried at cost less accumulated amortization and amortized on a straight-lined basis, were as follows:
 
 
Weighted
Average
 
December 31, 2014
 
 
Amortization
Life in Years
 
Cost
 
Accumulated
Amortization
 
Net
Patents
 
9
 
$
12,357

 
$
7,315

 
$
5,042

MCDA contract *
 
10
 
8,571

 
8,285

 
286

Customer contracts
 
9
 
5,319

 
3,584

 
1,735

Trademarks
 
4
 
425

 
425

 

Total
 
 
 
$
26,672

 
$
19,609

 
$
7,063

 

36


 
 
Weighted
Average
 
December 31, 2013
 
 
Amortization
Life in Years
 
Cost
 
Accumulated
Amortization
 
Net
Patents
 
9
 
$
11,367

 
$
6,389

 
$
4,978

MCDA contract *
 
10
 
8,571

 
7,428

 
1,143

Customer contracts
 
9
 
5,319

 
2,950

 
2,369

Trademarks
 
4
 
425

 
425

 

Total
 
 
 
$
25,682

 
$
17,192

 
$
8,490


*MCDA contract:  Manufacturing, Commercialization and Development Agreement with Hospira, Inc. (“Hospira”), dated May 1, 2005 (the "MCDA”).
 
Amortization expense in 2014, 2013 and 2012 was $2.4 million, $2.5 million and $2.6 million, respectively.  Estimated annual amortization for each of the next five years is approximately $1.9 million for 2015, $1.2 million for 2016, $1.1 million for 2017, $1.0 million for 2018 and $0.6 million for 2019.

h.         Long-Lived Assets
 
We periodically evaluate the recoverability of long-lived assets whenever events and changes in circumstances indicate that the carrying amount of an asset may not be fully recoverable. When indicators of impairment are present, the carrying values of the assets are evaluated in relation to the operating performance and future undiscounted cash flows of the underlying business. The net book value of the underlying asset is adjusted to fair value if the sum of the expected discounted cash flows is less than book value. Fair values are based on estimates of market prices and assumptions concerning the amount and timing of estimated future cash flows and discount rates, reflecting varying degrees of perceived risk.

i.                      Investment Securities
 
Our investment securities, which are carried at fair market value and are considered available-for-sale, consist principally of certificates of deposits, corporate bonds, commercial paper and tax-exempt state and municipal government debt. Available-for-sale securities are recorded at fair value, and unrealized holding gains and losses are recorded, net of tax, as a component of accumulated other comprehensive income. Unrealized losses on available-for-sale securities are charged against net earnings when a decline in fair value is determined to be other than temporary. Our management reviews several factors to determine whether a loss is other than temporary, such as the length and extent of the fair value decline, the financial condition and near term prospects of the issuer, and for equity investments, our intent and ability to hold the security for a period of time sufficient to allow for any anticipated recovery in fair value. For debt securities, management also evaluates whether we have the intent to sell or will likely be required to sell before its anticipated recovery. Realized gains and losses are accounted for on the specific identification method.

j.                  Income Taxes
 
Deferred taxes are determined based on the differences between the financial statements and the tax bases using rates as enacted in the laws. A valuation allowance is established if it is “more likely than not” that all or a portion of the deferred tax assets will not be realized.

We recognize interest and penalties related to unrecognized tax benefits in the tax provision. We recognize liabilities for uncertain tax positions when it is more likely than not that a tax position will not be sustained upon examination and settlement with various taxing authorities. Liabilities for uncertain tax positions are measured based upon the largest amount of benefit that is greater than 50% likely of being realized upon ultimate settlement. We have not recorded any material interest or penalties during any of the years presented.
 
The deduction we receive from indirect tax benefits from the exercise of stock options, such as those recognized for research and development credits and domestic production activities deductions, is recorded as a reduction to the tax provision. The direct tax benefits of share based compensation are recorded through additional-paid-in capital.


37


k.                  Foreign Currency
 
We have operations in Europe where the functional currency is the Euro and operations in Australia where the functional currency is the Australian dollar. Assets and liabilities are translated to U.S. dollars at the exchange rate in effect at the balance sheet date and revenues and expenses are translated at the average monthly exchange rates during the year. Translation adjustments are recorded as a component of accumulated other comprehensive income, a separate component of stockholders' equity on our consolidated balance sheets and the effect of exchange rate changes on cash and cash equivalents are reflected on our consolidated statements of cash flows. Gains and losses for transactions denominated in a currency other than the functional currency of the entity are included in our statements of operations. Foreign currency transaction gains and losses were $0.1 million in 2014 and less than $0.1 million in 2013 and 2012.

l.                      Revenue Recognition
 
Most of our product sales are free on board shipping point and ownership of the product transfers to the customer on shipment.  We record sales and related costs when ownership of the product transfers to the customer, persuasive evidence of an arrangement exists, collectability is reasonably assured and the sales price is determinable.  Our customers are distributors, medical product manufacturers and end-users.  Our only post-sale obligations are warranty and certain rebates.  We warrant products against defects and have a policy permitting the return of defective products.  We reserve for warranty and returns based on historical experience. We accrue rebates based on agreements and on historical experience as a reduction in revenue at the time of sale.
 
Other revenue consists of license, royalty and revenue sharing payments.  Payments expected to be received are estimated and recorded in the period earned, and adjusted to actual amounts when reports are received from payers; if there is insufficient data to make such estimates, payments are not recorded until reported by the payers.
 
m.                Shipping Costs
 
Costs to ship finished goods to our customers are included in cost of goods sold on the consolidated statements of income.

n.        Advertising Expenses

Advertising expenses are expensed as incurred and reflected in selling, general and administrative expenses in our consolidated statements of income and were $0.1 million in 2014, $0.3 million in 2013 and $0.2 million in 2012.

o.                  Post-retirement and Post-employment Benefits
 
We do not provide retirement or post-employment benefits to employees other than our Section 401(k) retirement plan ("plan") for employees.  Our contributions to the plan were approximately $1.3 million in 2014, $1.1 million in 2013 and $1.3 million in 2012.
 
p.           Research and Development
 
Research and development costs are expensed as incurred.
 
q.            Net Income Per Share
 
Net income per share is computed by dividing net income by the weighted average number of common shares outstanding. Diluted net income per share is computed by dividing net income by the weighted average number of common shares outstanding plus dilutive securities.  Dilutive securities are outstanding common stock options (excluding stock options with an exercise price in excess of the average market value for the period), less the number of shares that could have been purchased with the proceeds from the exercise of the options, using the treasury stock method.  Options that are anti-dilutive because their exercise price exceeded the average market price of the common stock for the period approximated 16,000 shares in 2014, 10,000 shares in 2013 and 7,000 shares in 2012.
 

38


The following table presents the calculation of net earnings per common share (“EPS”) — basic and diluted. 
 
 
Year ended December 31,
(in thousands, except per share data)
 
 
2014

2013

2012
Net income
 
$
26,335

 
$
40,418

 
$
41,281

Weighted average number of common shares outstanding (basic)
 
15,282

 
14,688

 
14,223

Dilutive securities
 
365

 
586

 
502

Weighted average common and common equivalent shares outstanding (diluted)
 
15,647

 
15,274

 
14,725

EPS - basic
 
$