ARS 1 eps9124.htm

 

 

 

 

 

FY 2020 Sales: $15.3 Million

The pie charts above demonstrate the success that Sono-Tek has had in its strategy of diversification of markets, products and geography. This has led to the development of an expanded line of ultrasonic coating products and systems that no other company can match, and which creates future growth opportunities.

 

 

 

Founded in 1975, Sono-Tek Corporation designs and manufactures ultrasonic coating systems that apply precise, thin-film coatings to a multitude of products for the microelectronics/electronics, alternative energy, medical and industrial markets, including specialized glass applications for lenses and electronic device surfaces.

Our environmentally-friendly ultrasonic spray systems provide high performance functional coatings, with dramatic reductions in overspray, savings in raw material, water and energy usage, improved process repeatability, transfer efficiency, high uniformity and reduced emissions.

Sono-Tek’s founder was the inventor of the ultrasonic nozzle and we remain the leader in the industry.

 

 

 

 

($ in thousands, except employee and per share data)  FY2020   FY2019   FY2018   FY2017   FY2016 
Net Sales  $15,355   $11,610   $11,008   $9,635   $11,739 
Gross Profit  $7,313   $5,249   $5,296   $4,363   $5,498 
Gross Margin   47.6%    45.2%    48.1%    45.3%    46.8% 
Selling, General and Administrative Expense  $4,770   $3,841   $3,635   $3,266   $3,507 
% of Sales   31.1%    33.1%    33.0%    33.9%    29.9% 
Research and Product Development Expense  $1,428   $1,325   $1,280   $1,276   $1,296 
% of Sales   9.3%    11.4%    11.6%    13.2%    11.0% 
Operating Profit (Loss)  $1,115   $82   $382   $(179)  $695 
Operating Margin   7.3%    0.7%    3.5%    (1.9)%   5.9% 
Net Income  $1,107   $162   $368   $96   $548 
Diluted Earnings Per Share  $0.07   $0.01   $0.02   $0.01   $0.04 
Weighted Average Shares Outstanding - Diluted   15,359    15,219    15,095    15,018    15,030 
Year End Financial Position                         
Cash, cash equivalents and investments  $7,879   $5,510   $6,422   $4,899   $4,084 
Total Assets  $14,743   $12,200   $11,779   $10,736   $10,670 
Total Debt (Long Term)  $708   $871   $1,027   $1,176   $1,320 
Stockholders’ Equity  $9,782   $8,585   $8,392   $7,923   $7,668 
Book Value Per Share  $0.64   $0.56   $0.56   $0.53   $0.51 
Other Year End Data                         
Depreciation and Amortization  $407   $332   $400   $440   $477 
Capital Expenditures  $722   $547   $189   $183   $465 
Number of Employees   76    68    64    58    68 
                          

 

 

 

 

 

Fiscal 2020 was our best year ever, with dramatic revenue growth of 33.6%, reaching $15.3M. Our net income increased to over $1M as we delivered our largest ever individual product to the semiconductor industry. All our products are based on our unique ultrasonic coating systems, which we invented more than forty years ago. Our evolution as a company has involved creating platforms that use our technology to meet customer needs in new markets. We regularly displace older, less efficient and less precise methods of applying coatings as we have added market segments over the years. We have migrated our business from fluxing printed circuit boards, to medical devices, to glass and other industrial coating lines, to clean energy applications such as solar electricity and fuel cells, and are now helping customers to manufacture advanced semiconductor wafers and chips.

We have also moved beyond our home market in the United States and now have a robust presence around the globe. In fact, more than half of our Fiscal 2020 sales are from international customers. We have built strong distributor relationships over the years, with intensive training at our headquarters combined with the creation of customer laboratories at many key distributors’ locations. Our customer laboratories both at headquarters and around the world are a significant factor in winning new customers and new applications. Our Application Engineering team works with customers in our laboratories to determine how to best address their specific needs using their surfaces and coating materials and our equipment. It has proven to be a highly successful approach.

New applications have led us to develop new equipment platforms, plus variations of existing platforms. Over time, we have transformed ourselves from simple nozzle sales to nozzle systems and then to a variety of prepackaged equipment solutions. We now have a number of printed circuit board fluxing machines, a collection of medical device coaters for different medical devices, large multiple nozzle systems for wide industrial coating applications involving glass, textiles, food, and other surfaces requiring coatings.

A large step forward occurred over the past decade as we added multi-axis coaters capable of three-dimensional (XYZ) coating requirements. Many surfaces require that the coating be applied uniformly over a flat surface of dimensions from a few square inches to several square feet, especially during the customer’s product development stage. Some, like MEMs, may requires that our coating nozzles move up and down while applying a uniform coating. These are demanding requirements and eliminate many older application methods. Most recently we have added robotic multi-axis coaters capable of motion in six axes, similar to the human arm and hand arrangement. These coating platforms open new, expanding opportunities for our ultrasonic coating business, since there are many irregular or curved surfaces that can benefit from our precision thin film coating capability. The addition of robotic coaters, as well as more complex multi-axis coaters, has caused our average sales price to significantly increase this past year, driving our revenues and income upward.

Going forward our strategy will continue to focus on our organic growth potential. We see continued opportunities to expand our addressable markets as we have done in the past. Our engineering team works closely with sales and applications to develop successful customer trials, which in turn leads to new market segments for us. Whenever we install our equipment, new or existing, at a customer site, the objective is simple—leave the customer delighted that they chose Sono-Tek for their coating application needs.

 

 

 

Internally, we have empowered employee teams to develop more efficient and precise methods for machining, product testing, assembly, and handling our overall factory material and data flow. This LEAN approach is now embedded at Sono-Tek, and has resulted in lower inventory needs, quicker turnaround, and less wasted effort in keeping track of material as it flows through our process to become finished product. Our teams have become more proficient at operating within a digital factory environment and have gained skills further advancing our productivity.

We are optimistic that the “best ever” year we just completed will set the base for future growth years, as more customers recognize the unusual capabilities we have for helping them create new and better products in a more precise and less environmentally impactful manner. In most cases we can reduce customers’ wasted overspray by eighty or ninety percent over conventional sprayers, helping both their bottom line and the environment. We look forward to an exciting new fiscal year.

Coronavirus will impact our business in the new fiscal year, but we don’t yet know to what extent. It had no impact on Fiscal Year 2020 results reported here, which ended February 29, 2020, since the completion of our fiscal year preceded the rise of illness and global shutdowns in various countries. Even our new first quarter (March-May 2020) is expected to show over 20% growth compared to the previous year, due to the existence of substantial backlog as the year began. Likewise, our second quarter (June-August 2020) appears to be in good shape as of this writing, due to longer lead proposals and orders. Beyond that, we will have to wait and see how events unfold, particularly therapies, vaccines, and government relaxation of shutdowns to protect the economy and workers’ livelihoods.

Sono-Tek continues to operate with reduced on-site contact and safety protocols, combined with extensive meetings, sales presentations, and customer start-up assistance over the internet. We are quickly learning new skills that will stand us in good stead when the crisis recedes.

Wishing all our investors and team members continued good health,

 

   
Christopher L Coccio, PhD R. Stephen Harshbarger
Chairman and Chief Executive Officer President

 

 

 

 

 

 

 

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

FORM 10-K

 

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d)

OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the Fiscal Year ended: February 29, 2020

 

Commission File Number: 0-16035

 

(Name of registrant as specified in its charter)

 

NEW YORK 14-1568099
(State or other Jurisdiction of (IRS Employer Identification Number)
Incorporation or Organization)  
   
2012 Route 9W, Milton, New York 12547
(Address of Principal Executive Offices) (Zip Code)

 

Registrant's Telephone Number, Including Area Code: (845) 795-2020

 

Securities Registered Pursuant to Section 12(b) of the Act:

Title of each class Trading Symbol(s) Name of each exchange
on which registered
None N/A N/A

 

Securities Registered Pursuant to Section 12(g) of the Act: Common Stock, $.01 par value
  (Title of Class)

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes No

 

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act. Yes No

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes No

 

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes No

 

1 

 

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and "emerging growth company" in Rule 12b-2 of the Exchange Act.

 

Large Accelerated Filer Accelerated Filer  
Non-accelerated Filer Smaller reporting company Emerging growth company

 

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.

 

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report.

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). YES NO

 

As of August 31, 2019 the last business day of the Registrant’s most recently completed second fiscal quarter, the aggregate market value of the Registrant's Common Stock held by non-affiliates of the Registrant was approximately $34,875,354 computed by reference to the average of the bid and asked prices of the Common Stock on said date, which average was $2.65.

 

The Registrant had 15,422,985 shares of Common Stock outstanding as of May 20, 2020.

 

DOCUMENTS INCORPORATED BY REFERENCE: None.

 

2 

 

PART I

 

ITEM 1 BUSINESS

 

Sono-Tek Corporation (the “Company”, “Sono-Tek”, “We” or “Our”) is the world leader in the design and manufacture of ultrasonic coating systems for applying precise, thin film coatings to protect, strengthen, smooth or create surfaces on parts and components for the microelectronics/electronics, alternative energy, medical, industrial and emerging research & development/other markets. We design and manufacture custom-engineered ultrasonic coating system solutions and also provide smaller sub-systems containing our patented nozzles and generators for manufacturers to incorporate into their own equipment.

Our ultrasonic nozzle systems use high frequency ultrasonic vibrations that atomize liquids into minute drops that can be applied to surfaces at low velocity providing microscopic layers of protective and other useful materials over a wide variety of surfaces, including glass and metals. Our equipment solutions are environmentally-friendly, efficient and highly reliable. They enable dramatic reductions in overspray, savings in raw material, water and energy usage and provide improved process repeatability, transfer efficiency, high uniformity and reduced emissions. We serve a variety of industries and applications and have a broad base of customers. Our largest customer accounted for 12% of revenue in fiscal 2020.

The applications that are employing our unique coating technology and expertise have been expanding as the advantages of ultrasonic coatings are more broadly recognized. The original application of our technology was to coat the inner surface of blood collection tubes used for medical diagnostic testing. Our products enable the application of a thin and uniform coating of material that prevents coagulation of blood. Following that initial breakthrough, our technology was then used for applying uniform flux coatings to printed circuit boards, a critical part of the fabrication process for all electronic devices. A later application for much larger surfaces was to address the many challenges that glass manufacturers faced. They needed a solution for specialized glass applications in the construction and automotive industries. Among other things, our ultrasonic nozzles are used to provide coatings that improve durability, create filters, increase clarity, reduce reflection, enable conductivity, and enhance safety. We have invested significant resources to enhance our market diversity by leveraging our core ultrasonic coating technology. As a result, we have increased our portfolio of products, the industries we serve, and the countries in which we sell our products.

 

We were founded by the inventor of the ultrasonic nozzle, Dr. Harvey Berger, and incorporated in New York on March 21, 1975. We became a public company in 1987 and our stock is traded on the OTCQX U.S. tier of the OTC exchange under the ticker symbol “SOTK”. Our corporate offices are located in Milton, New York where our production facilities are co-located. We also have a sales and service office in Singapore and an application process development laboratory in Guangzhou, China. We are ISO 9001 qualified since registering in September 1998 and have been recertified annually since then.

 

Our fiscal year ends on February 29. We refer to the fiscal year ended February 29, 2020 as “fiscal 2020” and use similar protocol for previous fiscal years.

 

Our Products, Markets and Customers

 

Our products are used in a wide range of applications. We provide our customers a broad offering of ultrasonic spray coating equipment solutions custom suited for their requirements and we continually expand our offerings to address new applications. Our products include fully-integrated Multi-Axis Coating Systems, Integrated Coating Systems, Fluxing Systems, OEM Systems and other related systems. We invest heavily in research and development to continually bring to market new solutions for our customers, to increase our market share and to solve high value problems in manufacturing.

 

3 

 

Our Multi-Axis Coating Systems, Integrated Coating Systems and Fluxing Systems provide complete fully-integrated solutions for our customers, while we created the Universal Align to offer our customers subsystems that integrate our nozzles and generators that they can then incorporate into their original equipment.

 

We have built our brand and reputation on providing high quality, highly reliable products that provide consistent performance for critical applications in demanding operating environments. Our surface coating solutions are used in 24/7 work schedules, under harsh and challenging manufacturing environments, where they provide value in a continuous and dependable fashion.

 

We target the following markets where our product quality and consistency and application knowledge are valued by our customers:

 

  Micro-Electronics/Electronics:

 

  o Printed circuit boards: Ultrasonic flux application removes oxidation and is more efficient than standard, historic processes.

 

  o Semiconductors: Applications of micron-thin photo-resist layers onto complex wafers.

 

  o Sensors: Application of chemical, biological or other detection coatings as well as physical photoelectric elements for conversion of input and output signals.

 

  o Display/panel glass on personal electronic devices: for sensitivity to temperature, imprint, pressure and for physical protection.

 

  Medical: Our systems are used in this industry to apply micron layers of polymers and drugs; biomedical materials and anti-coagulants.

 

  o Implanted medical devices such as:

 

  Stents and balloons

 

  Artificial joints

 

  o Blood collection tubes

 

  o Diagnostic devices

 

  o Bandages/protective wraps

 

  o Lenses

 

  Industrial

 

  o Flat (“float”) glass used for windows in buildings and vehicles

 

  o Textiles: high performance value adding coatings such as anti-microbial, anti-stain, flame retardant and moisture barriers

 

  o Food packaging and food safety: anti-microbial coatings

 

  o Food: coatings of flavors, ingredients and other additives

 

  Alternative Energy: Our systems provide coatings of chemicals and other materials that act as catalysts, barriers, symbiosis or other interactions between surfaces.

 

  o Fuel cells

 

  o Solar cells

 

  Emerging Research and Development / Other Markets

 

4 

 
  o Research and development efforts at universities, research institutions and government agencies that are not part of our already established markets

 

  o A variety of other small industries using our coating technology, that have not yet matured into a developed marketplace for our ultrasonic coating machines

 

Our principal customers include original equipment manufacturers, distributors and end users of our products in the industries that we serve.

 

Our products are sold primarily through our direct sales personnel, select independent distributors and through sales representatives around the world that are trained on our technologies and products. Our distributors are typically experts in their industries and recognize the significant value our technology provides their customers. We provide extensive training and on-site support with our direct sales force and application engineers, who also respond to leads generated by our web site and the trade shows in which we participate. To grow sales, we continue to strengthen our laboratory and applications engineering personnel; and support our worldwide process development labs with additional ultrasonic coating equipment, in conjunction with sponsoring various technical training seminars for our distribution network.

 

We also provide application consulting services enabling our customers to rely on our surface coating expertise and specific customer process optimization. We offer these services both in our application process development laboratory and at our customers’ sites where we can assist in the design and development of customized coating systems.

 

We are a global business and our geographical sales mix can vary from year to year depending on the timing of orders from customers. In fiscal 2020, 71% of our sales were from outside the U.S. and Canada.

 

Our Strengths

 

From our core strengths and capabilities we:

 

  Have built a strong reputation in the industry based on our ability to solve our customers’ complex problems and provide custom engineered, value-added solutions.

 

  Are renowned for our product quality, customer service and responsiveness and critical thinking that enables a strong problem-solving culture throughout our organization.

 

  Have expanded our ability to provide coating services for low to mid-volume demand to support our customers’ product development and testing.

 

  Are continually developing new technologies and solutions to address an ever-changing marketplace.

 

Our Strategy

 

Our strategy is to further advance the use of ultrasonic coating technologies for the microscopic coating of surfaces in a broader array of applications which enable better outcomes for our customers’ products and processes. We believe product superiority is imperative and that it is attained through the extensive experience that we have in the coatings industry, our proprietary manufacturing know-how and skills, and our unique work force we have built over the years.

 

We intend to leverage our innovative technologies, proprietary know-how, unique talent and experience, and global reach to:

 

  Grow the business globally by reaching new markets and further penetrating the markets and customers we currently serve;

 

5 

 

 

  Improve our earnings power through lean manufacturing processes, automation and continuous improvement;

 

  Develop new and unique technologies that solve our customers’ most challenging problems;

 

  Meet or exceed our customers’ expectations; and

 

  Provide an acceptable return to our shareholders.

 

To accomplish these objectives, we believe we must judiciously deploy our monetary and human capital, in order to expand our presence in our targeted markets and create a broader offering for our customers.

 

Availability of Raw Materials and Working Capital Practices

 

Historically, we have not been adversely impacted by the availability of raw materials or components used in the manufacture of our products. All raw materials used in our products are readily available from many different domestic suppliers. We purchase circuit board assemblies and sheet metal components from a wide range of suppliers throughout the world.

 

We carefully manage our inventory using lean manufacturing processes. We provide a limited warranty on all of our products that covers parts and labor for a period of one year from the date of sale.

 

Research and Development

 

We believe that our long-term growth is dependent upon the development and commercialization of ultrasonic coating technologies to solve customers’ high value problems across a wide spectrum of applications in various industries, while also advancing the utility of our core technology. During fiscal 2020 and fiscal 2019, we spent $1,428,000 and $1,325,000, respectively, on research and development activities related to new products and services and the ongoing improvement of existing products and services. As a percentage of sales, research and development expenses were 9.3% and 11.4% in fiscal 2020 and 2019, respectively.

 

Intellectual Property

 

Our business is based in part on the technology covered by our U.S. patents. We also rely on unpatented know-how in the design and production of our nozzle systems, subsystems and complete solutions. We have executed non-disclosure and non-compete agreements with all of our employees to safeguard our intellectual property. We execute reciprocal non-disclosure agreements with our key customers to safeguard any jointly developed intellectual property.

 

Competition

 

We operate in competitive markets in many of our industry segments. We compete against alternative coating technologies, as well as global and regional manufacturers of nozzles and other products based on price, quality, product features, application engineering and follow up service. We maintain our competitive position by providing highly effective solutions that meet our customers’ requirements and needs. In several emerging markets, we encounter less competition compared to more established markets based on the uniqueness of our ultrasonic technology in these applications.

 

Information Regarding Sales Outside the United States and Canada

 

During fiscal 2020 and fiscal 2019, sales to customers outside the U.S. and Canada accounted for approximately $10,849,000, or 71% of total revenue, and $7,560,000, or 65% of total revenue, respectively.

 

6 

 

 

Employees

 

As of February 29, 2020, we employed 68 full-time and 8 part-time employees. We believe that relations with our employees are generally good.

 

Available Information

 

We are subject to the informational requirements of the Securities Exchange Act of 1934, as amended. Therefore, we file reports, proxy statements and other information with the Securities and Exchange Commission (“SEC”). The SEC maintains a website at www.sec.gov that contains the reports, proxy statements and other information for registrants that file electronically, as we do. Additionally, these reports may be read and copied at the Public Reference Room of the SEC at 100 F Street, N.E., Washington, DC 20549. Information regarding the SEC’s Public Reference Room may be obtained by calling 1-800-SEC-0330.

We maintain a website at http://www.sono-tek.com. On our site, we provide copies of our Forms 8-K, 10-K, 10-Q, Proxy and Annual Report at no charge as soon as reasonably practicable after filing electronically such material with the SEC. Copies are also available, without charge, from Sono-Tek Corporation, 2012 Route 9W, Milton, NY 12547.

 

ITEM 1A RISK FACTORS – Not Required for Smaller Reporting Companies.

 

ITEM 1B UNRESOLVED STAFF COMMENTS - None.

 

ITEM 2 DESCRIPTION OF PROPERTIES

 

We own an industrial park located in Milton, New York that is subject to a ten-year mortgage, of which four years remain. The industrial park consists of approximately 50,000 square feet of office and warehouse space. Our offices, product development, manufacturing and assembly facilities are located in the industrial park. We presently utilize 37,000 square feet or 74% of the park for our operations. We believe our facilities will be adequate for the foreseeable future and the ownership of the industrial park provides us opportunity to expand as we grow.

 

Approximately 13,000 square feet of the park is leased or available for lease to unrelated third parties at any given time.

 

ITEM 3 LEGAL PROCEEDINGS – None

 

ITEM 4 MINE SAFETY DISCLOSURES – Not Applicable

 

7 

 

PART II

 

ITEM 5 MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

 

Our common stock currently trades on the OTCQX U.S. tier of the OTC exchange under the ticker symbol “SOTK”. Quotations of our common stock price reflect inter-dealer prices, without retail mark-up, mark-down or commission and may not necessarily represent actual transactions.

 

As of May 29, 2020, there were approximately 800 beneficial shareholders of our Common Stock.

 

We have not paid any cash dividends on our Common Stock since inception. We intend to retain earnings, if any, for use in our business and for other corporate purposes.

 

ITEM 6 SELECTED FINANCIAL DATA – Not Required for Smaller Reporting Companies.

 

ITEM 7 MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

 

Forward-Looking Statements

 

We discuss expectations regarding our future performance, such as our business outlook, in our annual and quarterly reports, press releases, and other written and oral statements. These “forward-looking statements” are based on currently available competitive, financial and economic data and our operating plans. They are inherently uncertain, and investors must recognize that events could turn out to be significantly different from our expectations. These factors include, among other considerations, general economic and business conditions; political, regulatory, tax, competitive and technological developments affecting our operations or the demand for our products; the duration and scope of the COVID-19 pandemic; the extent and duration of the pandemic’s adverse effect on economic and social activity, consumer confidence, discretionary spending and preferences, labor and healthcare costs, and unemployment rates, any of which may reduce demand for some of our products and impair the ability of those with whom we do business to satisfy their obligations to us; our ability to sell and provide our services and products, including as a result of continued pandemic related travel restrictions, mandatory business closures, and stay-at home or similar orders; any temporary reduction in our workforce, closures of our offices and facilities and our ability to adequately staff and maintain our operations resulting from the pandemic; the ability of our customers and suppliers to continue their operations as result of the pandemic, which could result in terminations of contracts, losses of revenue, and further adverse effects to our supply chain; maintenance of increased order backlog, including effects of any COVID-19 related cancellations; the imposition of tariffs; timely development and market acceptance of new products and continued customer validation of our coating technologies; adequacy of financing; capacity additions, the ability to enforce patents; maintenance of operating leverage; consummation of order proposals; completion of large orders on schedule and on budget; successful transition from primarily selling ultrasonic nozzles and components to a more complex business providing complete machine solutions and higher value subsystems; and realization of quarterly and annual revenues within the forecasted.

 

We undertake no obligation to update any forward-looking statement.

 

Overview

 

Founded in 1975, Sono-Tek Corporation designs and manufactures ultrasonic coating systems that apply precise, thin film coatings to a multitude of products for the microelectronics/electronics, alternative energy, medical and industrial markets, including specialized glass applications in construction and automotive. We also sell our products to emerging research and development and other markets. We have invested significant resources to enhance our market diversity by leveraging our core ultrasonic coating technology. As a result, we have increased our portfolio of products, the industries we serve and the countries in which we sell our products.

 

8 

 

Our ultrasonic nozzle systems use high frequency, ultrasonic vibrations that atomize liquids into minute drops that can be applied to surfaces at low velocity providing thin layers of protective materials over a surface such as glass or metals. Our solutions are environmentally-friendly, efficient and highly reliable. They enable dramatic reductions in overspray, savings in raw material, water and energy usage and provide improved process repeatability, transfer efficiency, high uniformity and reduced emissions.

 

We believe product superiority is imperative and that it is attained through the extensive experience we have in the coatings industry, our proprietary manufacturing know-how and skills and our unique work force we have built over the years. Our growth strategy is to leverage our innovative technologies, proprietary know-how, unique talent and experience, and global reach to further advance the use of ultrasonic coating technologies for the microscopic coating of surfaces in a broader array of applications that enable better outcomes for our customers’ products and processes.

 

We are a global business with approximately 71% of our sales generated from outside the United States and Canada. Our direct sales team and our distributor and sales representative network is located in North America, Latin America, Europe and Asia. Over the last few years, we have expanded our sales capabilities by increasing the size of our direct sales force, adding new distributors and sales representatives (”reps”). In addition, we have established testing labs at our distribution partner sites in China, Taiwan, Germany, Turkey, Korea and Japan, while also expanding our first testing lab that is co-located with our manufacturing facilities in New York. These labs provide significant value for demonstrating to prospective customers the capabilities of our equipment and enabling us to develop custom solutions to meet their needs.

Over the last decade, we have shifted our business from primarily selling our ultrasonic nozzles and components to a more complex business providing complete machine solutions and higher value subsystems to original equipment manufacturers (“OEMs”). This strategy has resulted in significant growth of our average unit selling price; with our larger machines often selling for over $300,000 and system prices sometimes reaching over $1,000,000. As a result of this transition, we have broadened our addressable market and we believe that we can grow sales on a larger scale. We expect that we will experience wide variations in both order flow and shipments from quarter to quarter.

 

Highlights

 

Highlights for fiscal 2020 include:

 

  Net sales for fiscal 2020 were $15,355,000, up 32% compared with $11,610,000 for fiscal 2019. This substantial increase was driven by three large orders for complex highly customized equipment.

 

  Gross profit and operating margins for fiscal 2020 increased to 47.6% and 7.3%, respectively, from 45.2% and 0.71%, respectively, for fiscal 2019. Higher gross profit margin primarily reflects the impact from the sale of three large orders of complex highly customized equipment.

 

  Basic Earnings and Diluted Earnings per share increased 600% to $0.07 in fiscal 2020 compared with $0.01, for fiscal 2019.

 

  Backlog on February 29, 2020 was $3,517,000, up 16% from backlog of $3,038,000 on February 28, 2019. Backlog growth resulted from our ongoing strategy to expand the Sono-Tek product line and markets we serve, by providing larger highly automated, complex ultrasonic coating solutions.

 

  Cash and cash equivalents and short-term investments at February 29, 2020 were $7,879,000 compared with $5,510,000 as of February 28, 2019, an increase of $2,369,000. Operating activities generated cash of $3,254,000 in fiscal 2020.  Capital expenditures in fiscal 2020 were $722,000.  

 

  We have a strong balance sheet with debt accounting for approximately 7% of total capitalization. We believe that provides us with the financial flexibility to pursue our business strategy for growth.

  

9 

 

 

Market and Geographic Diversity

 

We have invested significant resources to enhance our market diversity. Leveraging our core ultrasonic coating technology, we expanded our portfolio of products, the industries we serve, and the countries in which we sell our products.

 

Today, we serve five industries: microelectronics/electronics, medical, alternative energy, emerging research and development and other, as well as the industrial markets.

 

We are a geographically diverse company with a presence directly and through distributors and trade representatives, in the United States and Canada , EMEA (Europe, Middle East and Africa), APAC (Asia Pacific) and Latin America (including Mexico). In fiscal 2020, approximately 71% of sales originated outside of the United States and Canada. We established an infrastructure to drive our geographic diversity including a newly equipped, application process development laboratory in APAC, a strengthened sales organization of application engineers, expanded talent on our engineering team, the latest, most sophisticated design software tools, as well as an expanded, highly trained installation and service organization.

 

We believe that the new products we have introduced, the new markets we have penetrated, and the regions in which we now sell our products, are a strong foundation for our future sales growth and enhanced profitability.

 

Results of Operations

 

Sales and Gross Profit:

   Fiscal Year Ended         
   February 29,   February 28,   Change     
   2020   2019   $   % 
Net Sales  $15,355,000   $11,610,000   $3,745,000    32% 
Cost of Goods Sold   8,041,000    6,361,000    1,680,000    26% 
Gross Profit  $7,313,000   $5,249,000   $2,064,000    39% 
                     
Gross Profit %   47.6%    45.2%           

 

Through the introduction of several new high value machine offerings, we have increased our fixed costs relative to our variable costs which has allowed us to create greater operating leverage and income potential. This transition of our cost structure in combination with our continued investment in application engineering capabilities, drove sales up 32% to $15,355,000, compared with the prior fiscal year. Gross profit increased by 240 basis points, reaching 47.6% for fiscal 2020, compared to 45.2% for FY2019. The improvement in gross profit was primarily impacted by a shift of sales to less price sensitive advanced technology markets, requiring a higher level of coating process related expertise provided from our applications engineers and laboratories. Our capability to provide this full system solution approach, brings increased value to the customer and allows this value to be reflected with increased margins.

 

In fiscal 2020, our sales include approximately $3,492,000 for orders that were delivered to two customers.

 

10 

 

 

Product Sales:

   Twelve Months Ended     
   February 29,   % of   February 28,   % of   Change     
   2020   total   2019   total   $   % 
Fluxing Systems  $906,000    6%   $1,176,000    10%   $(270,000)   (23%)
Integrated Coating Systems   3,599,000    23%    1,449,000    13%    2,150,000    148% 
Multi-Axis Coating Systems   6,866,000    45%    4,906,000    42%    1,960,000    40% 
OEM Systems   1,384,000    9%    1,891,000    16%    (507,000)   (27%)
Other   2,600,000    17%    2,188,000    19%    412,000    19% 
TOTAL  $15,355,000        $11,610,000        $3,745,000    32% 

 

Sales growth was driven by demand for more complex, highly engineered and higher value machinery, combined with application specific knowledge. Multi-Axis Coating systems grew by 40%, primarily due to a sale of our new 6-axis robotic platform. Integrated Coating Systems grew 148% due to several sales of a new custom designed multi-nozzle system sold to the electronics industry.

 

Market Sales:

   Twelve Months Ended     
   February 29,   % of   February 28,   % of   Change 
   2020   total   2019   total   $   % 
Electronics/Microelectronics  $8,486,000    55%   $4,328,000    37%   $4,158,000    96% 
Medical   3,476,000    23%    3,173,000    28%    303,000    10% 
Alternative Energy   1,923,000    12%    2,111,000    18%    (188,000)   (9%)
Emerging R&D and Other   1,018,000    7%    1,295,000    11%    (277,000)   (21%)
Industrial   452,000    3%    703,000    6%    (251,000)   (36%)
TOTAL  $15,355,000        $11,610,000        $3,745,000    32% 

 

Use of our application process development laboratory by customers continued to reach record levels in FY2020, which we believe demonstrates the success of our strategy to provide excellent application engineering expertise as well as paid coating services to prospects and customers to validate the capabilities of our coating technologies for their uses. These service-based customers are guided by our applications engineering team, to develop successful coating processes for their unique needs. Upon achieving coating results that meet the application requirements, the customer's next step is typically to purchase the newly defined coating solution. We believe a high percentage of prospects and customers that use our lab services to develop their products results in sales of our ultrasonic coating solutions.

 

Our sales to the Electronics/Microelectronics market showed significant growth in FY2020, reaching $8,486,000; a 96% increase compared to FY2019. The near doubling increase was the successful result of our focused plan to expand our product line with higher value, higher revenue machines. Our sales to the Medical market grew 10% in FY2020 compared to FY2019, which were driven by strong demand for our stent coating systems. Our sales to the Alternative Energy market showed a small decline of 9% in FY2020, due to lower than expected sales of our fuel cell systems in China. Our sales to the Emerging R&D and Industrial markets decreased 21% and 36% respectively, due to decreased sales of our float glass coating systems, and decreased sales in food applications, which is a typical due to variations in demand and applications from period to period.

 

11 

 

Geographic Sales:

   Twelve Months Ended     
   February 29,   February 28,   Change 
   2020   2019   $   % 
U.S. & Canada  $4,506,000   $4,050,000   $456,000    11% 
Asia Pacific (APAC)   4,817,000    3,659,000    1,158,000    32% 
Europe, Middle East, Asia (EMEA)   4,512,000    2,729,000    1,783,000    65% 
Latin America   1,520,000    1,172,000    348,000    30% 
TOTAL  $15,355,000   $11,610,000   $3,745,000    32% 

 

In fiscal 2020, approximately 71% of sales originated outside of the United States and Canada. This compares with 65% in fiscal 2019. Sales to APAC and EMEA grew substantially, primarily from China and Germany in the Electronics / Microelectronics markets.

 

Operating Expenses:

   Twelve Months Ended         
   February 29,   February 28,   Change 
   2020   2019   $   % 
Research and product development  $1,428,000   $1,325,000   $103,000    8% 
Marketing and selling   3,403,000    2,686,000    717,000    27% 
General and administrative   1,367,000    1,155,000    212,000    18% 
Total Operating Expenses  $6,198,000   $5,166,000   $1,032,000    20% 

 

Research and Product Development:

Research and product development costs increased $103,000 to $1,428,000 for fiscal 2020 as compared with $1,325,000 for the prior fiscal year. Higher research and product development costs for fiscal 2020 were due to increased engineering salaries and health insurance premiums.

 

Marketing and Selling:

Marketing and selling costs increased $717,000 to $3,403,000 for fiscal 2020 as compared with $2,686,000 for the prior fiscal year. Higher marketing and selling costs for fiscal 2020 were due to increased salaries related to the addition of new technical sales personnel and related health insurance premiums, international commission expense and trade show expense. These increases were partially offset by decreases in travel expense and international distributor training expense.

 

During fiscal 2020, we expended approximately $865,000 for commissions as compared with $457,000 for the prior fiscal year, an increase of $408,000. The increase in commission expense is primarily the result of an increase in the proportion of our international sales generated by our external distributors which are commissioned at a higher rate than our in-house sales team.

 

During fiscal 2020, we expended approximately $297,000 for advertising and trade show expense compared with $247,000 for the prior fiscal year, an increase of $50,000.

 

General and Administrative:

General and Administrative costs increased $212,000 to $1,367,000 for fiscal 2020 as compared with $1,155,000 for the prior fiscal year. Higher general and administrative costs for fiscal 2020 were due to increased health insurance premiums, increased corporate insurance premiums, corporate expenses and stock-based compensation expense. These increases were partially offset by lower professional fees.

 

12 

 

In fiscal 2020, we accrued approximately $97,000 for potential Covid-19 sick time. This accrual has been recorded in General and Administrative expense.

 

Health Insurance Premiums:

The Company’s health insurance program requires employee contributions. The Company’s net health insurance expense increased $59,000 to $383,000 for fiscal 2020 as compared with $324,000 for the prior fiscal year. The increase in health insurance expense is due to the Company’s annual insurance program renewal and eligible employee enrollment.

 

Operating Income:

Operating income increased $1,033,000, to $1,115,000 in fiscal 2020 compared with $82,000 for the prior fiscal year. Growth in revenue and gross profit were key factors in the improvement of operating income in fiscal 2020. Operating margin for fiscal 2020 increased to 7.3% compared with 0.71% in the prior fiscal year. As a percentage of net sales, operating expenses were down 400 basis points to 40.4% in fiscal 2020 compared with 44.5% in fiscal 2019.

 

Interest Expense:

Interest expense decreased to $33,000 for fiscal 2020 as compared with $40,000 for the prior fiscal year. Interest expense is directly related to the mortgage on our industrial park.

 

Interest and Dividend Income:

Interest and dividend income decreased $35,000 to $102,000 for fiscal 2020 as compared with $137,000 for the prior fiscal year. The decrease in interest and dividend income is due to the reallocation of our investments into US Treasury securities and certificates of deposit. Our present investment policy is to invest excess cash in highly liquid, low risk US Treasury securities, certificates of deposit and mutual funds. At February 29, 2020, the majority of our holdings are rated at or above investment grade.

 

Net Unrealized Loss on Marketable Securities:

The Company adopted ASU 2016-01, “Financial Instruments – Overall: Recognition and Measurement of Financial Assets and Financial Liabilities” in the first quarter of fiscal 2019. ASU 2016-01 requires the Company to measure its equity investments at fair value and changes in fair value are to be recognized in net income. Further information is available in NOTE 2: SIGNIFICANT ACCOUNTING POLICIES in our financial statements.

 

In fiscal 2019, net income and earnings per share each reflect the actual deduction of $100,000, for the unrealized loss on our marketable securities.

 

In fiscal 2020, there was no unrealized gain or loss recorded for the Company’s marketable securities. Unrealized gains or losses, if any, are considered to be immaterial.

 

Other Income:

Included in other income is the net revenue related to the rental of the Company’s real estate. For fiscal 2020, the Company’s rental revenue was $85,000, expenses were $56,000 and the net profit was $29,000.

 

For fiscal 2019, the Company’s rental revenue was $84,000, expenses were $61,000 and the net profit was $23,000.

 

Income Tax Expense:

We recorded income tax expense of $106,000 for fiscal 2020 compared with $20,000 for the prior fiscal year. The details of the current year’s tax expense are explained in Note 11 in our financial statements.

 

13 

 

Net Income:

Net income increased by $945,000 to $1,107,000 for fiscal 2020 compared with $162,000 for the prior fiscal year. The increase reflects an increase in gross profit of $2,064,000 offset by an increase in operating expenses of $1,032,000 and an increase in income tax expense of $86,000.

 

For fiscal 2020 and 2019, we do not believe that our sales revenue or net income has been affected by the impact of inflation or changing prices.

 

Impact of Covid 19

 

In December 2019, the novel coronavirus (“COVID-19”) outbreak occurred in China and has since spread to other parts of the world. On March 11, 2020, the World Health Organization declared COVID-19 to be a global pandemic and recommended containment and mitigation measures. On March 13, 2020, the United States declared a national emergency concerning the outbreak. Along with these declarations, extraordinary and wide-ranging actions have been taken by international, federal, state, and local public health and governmental authorities to contain and combat the outbreak and spread of COVID-19 in regions across the United States and the world. These actions include quarantines, social distancing and “stay-at-home” orders, travel restrictions, mandatory business closures and other mandates that have substantially restricted individuals’ daily activities and curtailed or ceased many businesses’ normal operations.

 

In response to the pandemic and these actions, we began implementing changes in our business in March 2020 to protect our employees and customers:  

 

·We implemented social distancing and other health and safety protocols.
·We have flexed the workforce in our manufacturing operations based on business needs, including the addition of a second shift and the implementation of remote, alternative and flexible work arrangements.
·We have enhanced cleaning and sanitary procedures.
·We temporarily eliminated domestic and international travel.
·We restricted access to our facilities to only employees and essential non-employees with strict protocols.  

While all of these measures have been necessary and appropriate, they may result in additional costs and may adversely impact our business and financial performance. As our response to the pandemic evolves, we may incur additional costs and will potentially experience adverse impacts to our business, each of which may be significant. In addition, an extended period of remote work arrangements could impair our ability to effectively manage our business, and introduce additional operational risks, including, but not limited to, cybersecurity risks and increased vulnerability to security breaches, cyber-attacks, computer viruses, ransomware, or other similar events and intrusions. We may experience, decreases in demand and customer orders for our products in all sales channels, as well as temporary disruptions and closures of our facilities due to decreased demand and government mandates.

 

COVID-19 has also impacted various aspects of the supply chain as our suppliers experience similar business disruptions due to operating restrictions from government mandates. We continue to monitor procurement of raw materials and components used in the  manufacturing, distribution and sale of our products, but continued disruptions in the supply chain due to COVID-19 may cause difficulty in sourcing materials or unexpected shortages or delays in delivery of raw materials and components, and may result in increased costs in our supply chain.

 

We have implemented plans to reduce spending in certain areas of our business, including reductions or delays in capital expenditures, reduced trade show participation costs, reduced travel expenditures and may need to take additional actions to reduce spending in the future.

14 

 

We are closely monitoring and assessing the impact of the pandemic on our business. The extent of the impact on our results of operations, cash flow, liquidity, and financial performance, as well as our ability to execute near- and long-term business strategies and initiatives, will depend on numerous evolving factors and future developments, which are highly uncertain and cannot be reasonably predicted.

 

Given the inherent uncertainty surrounding COVID-19, we expect the pandemic may continue to have an adverse impact on our business in the near term. Should these conditions persist for a prolonged period, the COVID-19 pandemic, including any of the above factors and others that are currently unknown, may have a material adverse effect on our business, results of operations, cash flow, liquidity, and financial condition.

 

Liquidity and Capital Resources

 

Working Capital – Our working capital increased $749,000 to $7,173,000 at February 29, 2020 from $6,424,000 at February 28, 2019. The increase in working capital was mostly the result of the current period’s net income and non-cash charges partially offset by purchases of equipment and repayment of long-term debt.

 

We aggregate cash and cash equivalents and marketable securities in managing our balance sheet and liquidity. For purposes of the following analysis, the total is referred to as “Cash.” At February 29, 2020 and February 28, 2019, our working capital included:

 

   February 29,
2020
   February 28,
2019
   Cash
Increase
 
Cash and cash equivalents  $3,660,000   $3,144,000   $516,000 
Marketable securities   4,219,000    2,366,000    1,853,000 
Total  $7,879,000   $5,510,000   $2,369,000 

 

The following table summarizes the accounts and the major reasons for the $2,369,000 increase in “Cash”:

 

   Impact on Cash   Reason 
Net income, adjusted for non-cash items  $1,589,000    To reconcile increase in cash. 
Accounts receivable decrease   443,000    Cash receipts. 
Inventories increase   (406,000)   Required to support backlog. 
Equipment purchases   (722,000)   Equipment and facilities upgrade. 
Customer deposits increase   499,000    Received for new orders. 
Accounts payable increase   1,064,000    Timing of disbursements 
Other-net   (98,000)   Timing of disbursements. 
Net increase in cash  $2,369,000      

 

Stockholders’ Equity - Stockholders' equity increased $1,198,000 from $8,584,000 at February 28, 2019 to $9,782,000 at February 29, 2020. The increase was a result of the current year’s net income of $1,107,000 and $90,000 in additional equity related to stock based compensation awards. The details of stock based compensation are explained in Note 4 in our financial statements.

 

Operating Activities – We generated $3,254,000 of cash in our operating activities in fiscal 2020 compared with using $109,000 in fiscal 2019. The increase in cash generated by operating activities was mostly the result of increased accounts payable, accrued expenses, customer deposits and a decrease in accounts receivable. These sources of cash were partially offset by increased inventories and a decrease in prepaid expenses directly related to inventory.

 

Investing Activities – In fiscal 2020, cash used by investing activities was $2,576,000 compared with their providing $1,393,000 of cash in fiscal 2019. Capital spending in fiscal 2020 was $722,000 for the purchase or manufacture of equipment, furnishings and leasehold improvements. This compares with $547,000 for the purchase of equipment and furnishings in fiscal 2019.

 

15 

 

In fiscal 2020 we used $1,854,000 for the purchase of marketable securities. In fiscal 2019 we received $1,940,000 from the sale of marketable securities.

 

Financing Activities – In fiscal years 2020 and 2019, we used $163,000 and $156,000 in cash, respectively, for the principal payments on our mortgage.

 

Net Increase in Cash and Cash Equivalents – In fiscal 2020 our cash balance increased by $515,000 as compared with an increase of $1,128,000 in fiscal 2019. During fiscal 2020, our operating activities generated $3,254,000 of cash. In addition, we used $722,000 for the purchase or manufacture of equipment, furnishings and leasehold improvements, used $1,854,000 for the purchase of marketable securities and used $163,000 for the repayment of our note payable.

 

Bank Credit Facilities:

We currently have a revolving credit line of $1,500,000 and a $750,000 equipment purchase facility, both of which are with a bank. The revolving credit line is collateralized by the Company’s accounts receivable and inventory. The revolving line of credit is payable on demand and must be retired for a 30-day period, once annually. As of February 29, 2020, there were no outstanding borrowings under the line of credit.

 

As of February 29, 2020, $701,000 of the Company’s credit line was being utilized to collateralize letters of credit issued to customers that have remitted cash deposits to the Company on existing orders. The unused portion of the credit line was $799,000 as of February 29, 2020. The letters of credit expire in 2020.

 

We had outstanding borrowings under a note payable of $708,000 at February 29, 2020. The note is payable over four years and accrues interest at 4.15% per year. The note payable is secured by a mortgage on our land and buildings.

 

Subsequent to the completion of fiscal 2020, on April 17, 2020, we entered into a loan transaction pursuant to which we received proceeds of $1,001,640 (the “PPP Loan”) on May 8, 2019 under the Paycheck Protection Program (“PPP”). The PPP, established as part of the Coronavirus Aid, Relief and Economic Security Act (“CARES Act”), provides for loans to qualifying companies and is administered by the U.S. Small Business Administration (the “SBA”).

 

The PPL Loan is evidenced by a promissory note, dated as of April 17, 2020 (the “Note”), between the Company and a bank. The Note has a two-year term, bears interest at the rate of 1.0% per annum, and may be prepaid at any time without payment of any premium. No payments of principal or interest are due during the six-month period beginning on the date of the Note (the “Deferral Period”). Beginning on the seventh month following the date of the Note, we are required to make 18 monthly payments of principal and interest in the amount of $56,088.24.

 

Under the terms of the CARES Act, PPP loan recipients can apply for and be granted forgiveness for all or a portion of loan granted under the PPP, with such forgiveness to be determined, subject to limitations, based on the use of the loan proceeds for payment of payroll costs and any payments of mortgage interest, rent, and utilities. However, at least 75 percent of the PPP Loan proceeds must be used for eligible payroll costs. The terms of any forgiveness may also be subject to further requirements in any regulations and guidelines the SBA may adopt.

 

16 

 

 

Off - Balance Sheet Arrangements

 

We do not have any Off - Balance Sheet Arrangements as of February 29, 2020.

 

Critical Accounting Policies

 

The discussion and analysis of the Company’s financial condition and results of operations are based upon the Company’s consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States of America. The preparation of these financial statements requires the Company to make estimates and judgments that affect the reported amount of assets and liabilities, revenues and expenses, and related disclosure on contingent assets and liabilities at the date of the financial statements. Actual results may differ from these estimates under different assumptions and conditions.

 

Critical accounting policies are defined as those that are reflective of significant judgments and uncertainties, and may potentially result in materially different results under different assumptions and conditions. As of February 29, 2020, management believes that there are no critical accounting policies applicable to the Company that are reflective of significant judgments and or uncertainties.

 

Stock-Based Compensation

The computation of the expense associated with stock-based compensation requires the use of a valuation model. ASC 718 is a complex accounting standard, the application of which requires significant judgment and the use of estimates, particularly surrounding Black-Scholes assumptions such as stock price volatility, expected option lives, and expected option forfeiture rates, to value equity-based compensation. We currently use a Black-Scholes option pricing model to calculate the fair value of stock options. We primarily use historical data to determine the assumptions to be used in the Black-Scholes model and have no reason to believe that future data is likely to differ materially from historical data. However, changes in the assumptions to reflect future stock price volatility and future stock award exercise experience could result in a change in the assumptions used to value awards in the future and may result in a material change to the fair value calculation of stock-based awards. ASC 718 requires the recognition of the fair value of stock compensation in net income. Although every effort is made to ensure the accuracy of our estimates and assumptions, significant unanticipated changes in those estimates, interpretations and assumptions may result in recording stock option expense that may materially impact our financial statements for each respective reporting period.

 

Impact of New Accounting Pronouncements

 

In January 2016, the FASB issued ASU 2016-01, “Financial Instruments – Overall: Recognition and Measurement of Financial Assets and Financial Liabilities.” ASU 2016-01 requires equity investments (except those accounted for under the equity method of accounting, or those that result in consolidation of the investee) to be measured at fair value with changes in fair value recognized in net income, requires public business entities to use the exit price notion when measuring the fair value of financial instruments for disclosure purposes, requires separate presentation of financial assets and financial liabilities by measurement category and form of financial asset, and eliminates the requirement for public business entities to disclose the method(s) and significant assumptions used to estimate the fair value that is required to be disclosed for financial instruments measured at amortized cost. ASU 2016-01 is effective for all entities for fiscal years beginning after December 15, 2017, and interim periods within those fiscal years. The Company has evaluated the potential impact this standard may have on the consolidated financial statements, the fair value of the securities from the prior year has been reclassified to Retained Earnings from Other Accumulated Comprehensive Income.

 

In February 2016, the FASB issued ASU 2016-02, Leases (Topic 842), to increase transparency and comparability among organizations by recognizing a right-of-use asset and a lease liability on the balance sheet for all leases with terms longer than 12 months. Leases will be classified as either operating or financing, with such classification affecting the pattern of expense recognition in the income statement. ASU 2016-02 is effective for fiscal years and interim periods within those years beginning after December 15, 2018, and early adoption is permitted. The adoption of ASU 2016-02 will have no material impact on the Company’s financial statements.

 

17 

 

 

In February 2018, the FASB issued ASU 2018-02, Income Statement - Reporting Comprehensive Income (Topic 220), “Reclassification of Certain Tax Effects from Accumulated Other Comprehensive Income”. ASU 2018-02 was issued to allow the reclassification from accumulated other comprehensive income to retained earnings for the stranded tax effect resulting from the Tax Cuts and Jobs Act enacted on December 22, 2017. The Tax Cuts and Jobs Act, among other things, reduced the corporate tax rate from 35% to 21%, which required the re-evaluation of any deferred tax assets and liabilities at the lowered tax rate which potentially could leave a disproportionate tax effect in accumulated other comprehensive income. ASU 2018-02 allows for the election to reclassify these stranded tax effects to retained earnings. ASU 2018-02 is effective for all entities for fiscal years beginning after December 15, 2018, and interim periods within those fiscal years. Early adoption is permitted, including adoption in any interim period for public business entities for reporting periods for which financials statements have not yet been issued. The adoption of ASU 2018-02 will have no material impact on the Company’s financial statements.

 

In December 2019, the FASB issued ASU 2019-12, “Income Taxes (Topic 740) - Simplifying the Accounting for Income Taxes.” The guidance issued in this update simplifies the accounting for income taxes by eliminating certain exceptions to the guidance in ASC 740 related to the approach for intra-period tax allocation, the methodology for calculating income taxes in an interim period and the recognition for deferred tax liabilities for outside basis differences. ASU 2019-12 also simplifies aspects of the accounting for franchise taxes and enacted changes in tax laws or rates and clarifies the accounting for transactions that result in a step-up in the tax basis of goodwill. The ASU will be effective for the Company on March 1, 2021, with early adoption permitted, and is not expected to have a significant impact on the Company’s financial statements.

 

Other than, Accounting Standards Update (“ASU”) No. ASU 2016-01, ASU 2016-02, ASU 2018-02 and ASU 2019-12 discussed above, all new accounting pronouncements issued but not yet effective have been deemed to be not applicable to the Company. Hence, the adoption of these new accounting pronouncements, once effective, is not expected to have an impact on the Company.

 

ITEM 7A QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK – Not Required for Smaller Reporting Companies.

 

ITEM 8 FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

 

Our financial statements are presented on pages 32 to 49 of this Report.

 

ITEM 9 CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE – None.

 

ITEM 9A CONTROLS AND PROCEDURES

 

Evaluation of Disclosure Controls and Procedures

 

Our management, with the participation of our Chief Executive Officer and Chief Financial Officer, has evaluated the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rule 13a-15(e) under the Securities Exchange Act of 1934, as amended (the “Act”)) as of the end of the period covered by this annual report on Form 10-K.  Based on this evaluation, our Chief Executive Officer and Chief Financial Officer concluded that these disclosure controls and procedures were effective as of such date, at a reasonable level of assurance, in ensuring that the information required to be disclosed by us in the reports we file or submit under the Act is (i) accumulated and communicated to our management (including the Chief Executive Officer and Chief Financial Officer) in a timely manner, and (ii) recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms.

 

18 

 

 

Internal Control Over Financial Reporting

 

Management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Exchange Act Rules 13a-15(f). Under the supervision and with the participation of our management, including our Chairman & CEO (principal executive officer) and Chief Financial Officer (principal accounting officer), we conducted an evaluation of the effectiveness of our internal control over financial reporting based on the criteria in Internal Control - Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on our evaluation, management has concluded that our internal control over financial reporting was effective as of February 29, 2020. Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risks that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

 

Changes in Internal Control Over Financial Reporting

 

There was no change in our internal control over financial reporting (as defined in Rule 13a-15(f) under the Securities Exchange Act of 1934, as amended) that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

 

ITEM 9B OTHER INFORMATION - None.

 

19 

 

PART III

 

ITEM 10 DIRECTORS, EXECUTIVE OFFICERS, AND CORPORATE GOVERNANCE

 

(a)       Identification of Directors

 

Name  Age  Position with the Company
     
Christopher L. Coccio, Ph.D. 79 Chief Executive Officer, Chairman and Director
R. Stephen Harshbarger 52 President and Director
Eric Haskell, CPA 73 Director*
Donald F. Mowbray, Ph.D. 82 Director
Carol O’Donnell 63 Director*
Joseph Riemer, Ph.D. 71 Director
Samuel Schwartz 100 Chairman Emeritus and Director
Philip A. Strasburg, CPA 81 Director*

 

* Member of the Audit Committee.

 

The Board of Directors is divided into two classes. The directors in each class serve for a term of two years. The terms of the classes are staggered so that only one class of directors is elected at each annual meeting of the Company. The terms of Dr. Mowbray, Messrs. Haskell and Schwartz and Ms. O’Donnell run until the annual meeting to be held in 2020. The terms of Drs. Coccio and Riemer and Messrs. Strasburg and Harshbarger run until the annual meeting to be held in 2021, and in each case until their respective successors are duly elected and qualified.

 

Audit Committee

 

The Company’s Board of Directors has an Audit Committee composed of “independent directors”, Carol O’Donnell, Eric Haskell, CPA and Philip A. Strasburg, CPA, as Chairman. The “audit committee financial expert” designated by the Board is Philip A. Strasburg.

 

The Audit Committee is responsible for (i) selecting an independent public accountant for ratification by the stockholders, (ii) reviewing material accounting items affecting the consolidated financial statements of the Company, and (iii) reporting its findings to the Board of Directors.

 

Nominating Committee

 

There have been no changes to the procedures by which shareholders may recommend nominees to the Board of Directors.

 

  (b) Identification of Executive Officers

 

Name Age Position with the Company
     
Stephen J. Bagley, CPA 57 Chief Financial Officer
Bennett D. Bruntil 39 Vice President – Sales & Marketing
Christopher C. Cichetti 38 Vice President – Application Engineering
Christopher L. Coccio, Ph.D. 79 Chief Executive Officer, Chairman and a Director
Robb W. Engle 49 Executive Vice President
R. Stephen Harshbarger 52 President and Director

 

The foregoing officers are appointed for terms of one year or until their successors are duly elected and qualified or until terminated by the action of the Board of Directors. There are no arrangements or understandings between any executive officer and any other persons(s) pursuant to which he was or is to be selected as an officer.

20 

 

 

Business Experience

 

STEPHEN J. BAGLEY, CPA was appointed Chief Financial Officer in June 2005. From 1987 to 1991 he worked in public accounting in various capacities. From 1992 to 2005, he held various leadership positions as Controller, Chief Financial Officer and Vice President of Finance for companies with up to $45,000,000 in revenues. Mr. Bagley earned a Bachelor of Science degree from The State University of NY – College at Oneonta and an MBA from Marist College. He was licensed as a CPA in 1990. Mr. Bagley has been a member of the OTCQX Issuer Advisory Council since 2019. Mr. Bagley is a past President of the Board of Education for the New Paltz Central School District and a past Chairman of the Audit and Finance Committee for the District.

 

BENNETT D. BRUNTIL was appointed Vice President – Sales & Marketing in March 2018. Mr. Bruntil joined Sono-Tek in 2007 as a Regional Sales Manager and has served as Marketing Brand Manager and Director of the Electronics and Advanced Energy Division. Mr. Bruntil has experience in branding and product development and has successfully implemented sales strategies, launched new products and management of a diverse product line. Prior to joining Sono-Tek, Mr. Bruntil was a branch manager in the retail banking industry. He is a graduate of Central Connecticut State University with a major in psychology and a concentration in sociology.

 

CHRISTOPHER C. CICHETTI was appointed Vice President – Application Engineering in June 2019. Mr. Cichetti joined Sono-Tek in 2005 as an Electrical Engineer and has served as Application Engineer, Senior Application Engineer, and Manager of the Application Engineering Department. Mr. Cichetti has experience in lab testing, process development, project management, and has successfully implemented several successful OEM relationships with outside vendors. He is a graduate of Worcester Polytechnic Institute with a major in Computer and Electrical Engineering and a minor in International Studies.

 

DR. CHRISTOPHER L. COCCIO was appointed President and Chief Executive Officer of Sono-Tek on April 30, 2001, has been a Director of the Company since June 1998, and was appointed Chairman in August 2007. From 1964 to 1996, he held various engineering, sales, marketing and management positions at General Electric Company, with P&L responsibilities for up to $100 million in sales and 500 people throughout the United States. He also won an ASME Congressional Fellowship and served with the Senate Energy Committee in 1976. His business experience includes both domestic and international markets and customers. He founded a management consulting business in 1996, and was appointed a legislative Fellow on the New York State Assembly’s Legislative Commission on Science and Technology from 1996 to 1998. From 1998 to 2001, he worked with Accumetrics Associates, Inc., a manufacturer of digital wireless telemetry systems, as Vice President of Business Development and member of the Board of Advisors. Dr. Coccio received a B.S.M.E. from Stevens Institute of Technology, an M.S.M.E. from the University of Colorado, and a Ph.D. from Rensselaer Polytechnic Institute in Chemical Engineering.

 

Key attributes, Experience and Skills: Dr. Coccio brings his strategic vision for our Company to the Board together with his leadership, business experience and investor relations skills. Dr. Coccio has an immense knowledge of our Company and its related applications which is beneficial to the Board. Dr. Coccio’s service as Chairman and CEO bridges a critical gap between the Company’s management and the Board, enabling the Board to benefit from management’s perspective on the Company’s business while the Board performs its oversight function.

 

ROBB W. ENGLE joined Sono-Tek in 2000 as a Field Service Technician, became Vice President of Engineering in January 2013 and was appointed Executive Vice President in September 2019. Mr. Engle created the Sono-Tek Service Department and led the development of key products in his leadership role of our engineering resources. As Vice President of Engineering, he directs the engineering department, service department, IT and Sono-Tek laboratory services. Mr. Engle was formally trained and certified by the U.S. Navy as a Nuclear Operator where he was recognized with an induction into the Navy League Memorial for meritorious service and the advancement of training techniques. He also served with honors on board a submarine and earned the prestigious Sub-Surface Warfare (E) Insignia.

21 

 

 

R. STEPHEN HARSHBARGER joined Sono-Tek in 1993. He was appointed President of the Company in 2012 and became a Director in August 2013. As President, he directs the Company’s Sales, Marketing, Engineering, Service, and Manufacturing Operations. Prior to assuming his present position, Mr. Harshbarger served as Sales Engineer, World-Wide Sales and Marketing Manager, Vice President & Director of Electronics and Advanced Energy (E&AE) and Executive Vice President. In his years managing the sales organization, he established a worldwide distribution and representative network in more than 40 countries consisting of more than 300 persons, with revenue growth of greater than 300%. He has over 25 years of experience in ultrasonic coating equipment for the electronics, medical device and advanced energy industries. Prior to joining Sono-Tek, Mr. Harshbarger was the Sales and Marketing Manager for Plasmaco Inc., a world leader in the development of flat panel displays. In that position, he established their distribution network, participated in venture capital funding, and introduced the first flat panel technology to Wall Street trading floors.  He is a graduate of Bentley University, with a major in Finance and a minor in Marketing.

 

Key attributes, Experience and Skills: Mr. Harshbarger is among a small handful of ultrasonic coating experts in the world. He has a proven track record of identifying, developing and implementing the technology for new markets and applications. His expertise in establishing strong distribution networks and knowledge of ultrasonic coating for new product developments, targeted at specific advanced technology applications, bring insights to the Board. Mr. Harshbarger also brings leadership and oversight experience to the Board.

 

ERIC HASKELL, CPA has been a Director since August 2009. He has over 40 years of experience in senior financial positions at several public and private companies.  He has significant expertise in the areas of acquisitions and divestitures, strategic planning and investor relations.  From December 2005 through March 2008, Mr. Haskell served as the Executive Vice President and Chief Financial Officer of SunCom Wireless Holdings, Inc., a company providing digital wireless communications services which was publicly traded until its merger with a wholly-owned subsidiary of T-Mobile USA, Inc. in February 2008.  He also served as a member of SunCom’s Board of Directors from November 2003 through May 2007.  From 1989 until April 2004, Mr. Haskell served as the Chief Financial Officer of Systems & Computer Technology Corp., a NASDAQ listed software and services corporation.  Mr. Haskell received a Bachelors Degree in Business Administration from Adelphi University in 1969.

 

Key attributes, Experience and Skills: Mr. Haskell’s training and extensive experience in financial management at both public and private companies provide the Board with valuable insights. Mr. Haskell’s significant experience in acquisitions and divestitures and investor relations bring strategic judgment and experience to the Board. Mr. Haskell’s strong operational and business background complement his accounting and finance experience and are valuable resources to the Board as it exercises its oversight duties and support of the Company’s growth strategies.

 

DR. DONALD F. MOWBRAY has been a Director since August 2003. He has been an independent consultant since August 1997. From September 1992 to August 1997, he was the Manager of the General Electric Company’s Corporate Research and Development Mechanical Engineering Laboratory. From 1962 to 1992 he worked for the General Electric Company in a variety of engineering and managerial positions. Dr. Mowbray received a B.S. in Aeronautical Engineering from the University of Minnesota in 1960, a Master of Science in Engineering Mechanics from the University of Minnesota in 1962 and a Ph.D. from Rensselaer Polytechnic Institute in Engineering Mechanics in 1968.

 

Key attributes, Experience and Skills: Dr. Mowbray’s extensive research and managerial experience enables him to bring valuable insights to the Board. His knowledge of the Company’s products and the materials sciences technology underlying them has enabled him to contribute to the Company’s advanced products development and designs. Dr. Mowbray also brings leadership and oversight experience to the Board from his GE management background.

 

22 

 

 

CAROL O’DONNELL has been a Director since November 2018. Ms. O’Donnell joined Protégé Partners, an industry leading firm investing in and seeding smaller and emerging hedge fund managers in 2016 and has served as Chief Executive Officer since 2018. She was a key member of the Protégé executive team that launched an affiliate business, MOV37, for which she also serves as Chief Executive Officer. Prior to joining Protégé Partners, Ms. O’Donnell was the Director of Legal and Compliance with DARA Capital US, Inc., a Swiss-owned boutique registered investment advisory and wealth management firm from 2013 to 2016.  She also worked at Permal Group as General Counsel and Chief Compliance Officer and was COO and General Counsel of Framework Investment Group.  Ms. O’Donnell is admitted to practice law in the States of New York and Connecticut.

 

Key attributes, Experience and Skills: Ms. O’Donnell’s extensive experience as an attorney enables her to bring valuable strategic insights to the Board in the areas of corporate governance, finance and securities law. Ms. O’Donnell also brings leadership and oversight experience to the Board.

 

DR. JOSEPH RIEMER joined the Company in January 2007 as Vice President of Engineering and has been a Director since August 2007. Dr. Riemer served as President from September 2007 until August 2012 when he became Vice President of Food Business Development, which position he held until June 2016. Dr. Riemer holds a Ph.D. in Food Science and Technology from the Massachusetts Institute of Technology (MIT), focusing on food technology, food chemistry, biochemical analysis, and food microbiology. His experience includes seven years with Pfizer in its Adams Confectionary Division, where he was Director, Global Operations Development. Dr. Riemer has also held leading positions with several food, food ingredients, and personal care products companies. He has served in the capacities of research and development, operations, and general management. Prior to joining the Company, he was a management consultant serving clients in the food, biotech and pharmaceutical industries.

 

Key attributes, Experience and Skills: Dr. Riemer’s extensive research and management experience enables him to bring valuable insights to the Board. His considerable experience in the biotech, food and pharmaceutical industries bring specific product application insights to the Board. Dr. Riemer’s previous service as Vice President of Food Business Development helps to provide focus to the Board on this important marketing area. Dr. Riemer also brings leadership and oversight experience to the Board.

 

SAMUEL SCHWARTZ has been a Director of the Company since August 1987, and was Chairman of the Board from February 1993 to May 1999 and August 2001 to August 2007. From 1959 to 1992, he was the Chairman and Chief Executive Officer of Krystinel Corporation, a manufacturer of ceramic magnetic components used in electronic circuitry. He received a B.Ch.E. from Rensselaer Polytechnic Institute in 1941 and an M.Ch.E. from New York University in 1948.

 

Key attributes, Experience and Skills: Mr. Schwartz’s long-time experience as a businessman and manufacturer enables him to bring valuable operational insights to the Board. Mr. Schwartz’s experience as former Chairman of the Board enable him to bring operational insights to the Board. Mr. Schwartz also brings leadership and oversight experience to the Board.

 

PHILIP STRASBURG, CPA, has been a Director since August 2004. He is a retired partner from the firm of Anchin Block and Anchin, LLP and has 40 years of experience in auditing. He has served as Audit Committee Chairman since 2005. He was the lead partner on the Sono-Tek account from fiscal 1994 to fiscal 1996. Mr. Strasburg is a certified public accountant in New York State. He has a Master of Science in economics from The London School of Economics and Political Science and a Bachelor of Science degree from Lehigh University, where he majored in business administration.

 

Key attributes, Experience and Skills: Mr. Strasburg’s training and extensive experience in auditing provide the Board with valuable insights and skills necessary to lead the Audit Committee. Mr. Strasburg’s strong operational and business background complement his accounting and finance experience, and are valuable resources to the Board as it exercises its oversight duties and support of the Company’s growth strategies.

23 

 

 

(c)       Identification of Certain Significant Employees

 

Not applicable.

 

(d)       Family Relationships

 

None.

 

(e)       Involvement in certain legal proceedings

 

None.

 

Section 16(a) Beneficial Ownership Reporting Compliance

 

Section 16(a) of the Securities Exchange Act of 1934 requires the Company's Directors, executive officers and persons who own more than ten percent of the Company's common stock to file with the Securities and Exchange Commission initial reports of beneficial ownership and reports of changes of beneficial ownership of common stock.  Such persons are also required by Securities and Exchange Commission regulations to furnish the Company with copies of all such reports.  Based solely on a review of such filings, during the year ended February 29, 2020, all of the Company's Directors and executive officers and holders of more than ten percent of the Company’s stock have made timely filings of such reports.

 

Code of Ethics

 

The Company has adopted a Code of Ethics for senior executives and financial officers. The Board intends that this Code satisfy the requirements of the Securities and Exchange Commission rules for a Code of Ethics that applies to senior management. A copy of the Company's Code of Ethics is posted on the "information for investors" web page located at http://www.sono-tek.com/code-of-ethics/ and is available in print to any shareholder who requests a copy.

 

ITEM 11 EXECUTIVE COMPENSATION

 

The following table sets forth the aggregate remuneration paid or accrued by the Company for fiscal 2020 and fiscal 2019 for each named officer of the Company.

 

Summary Compensation Table

 

Name and
Principal Position
  Year   Salary
($)
   Bonus
($)
   Stock
Awards
   Option
Awards
($)
  

All Other
Compensation

($)

   Total
($)
 
                             
Christopher L. Coccio   2020    150,000    43,100    0    55,534    3,862    252,496 
CEO, Chairman and Director   2019    150,000    18,000    0        3,960    171,960 
                                    
R. Stephen Harshbarger   2020    222,327    49,700    0    4,983    5,441    282,451 
President and Director   2019    220,000    15,000    0    12,593    5,300    252,893 
                                    
Stephen J. Bagley   2020    155,000    39,800    0    1,294    3,896    199,990 
Chief Financial Officer   2019    155,000    12,000    0    4,198    3,820    175,018 

 

All Other Compensation represents Company contributions to the Company’s 401K plan.

 

24 

 

 

Option awards in the above table are calculated using the Black-Scholes options pricing model which is further discussed in Note 4 – Stock Based Compensation, in the Company’s financial statements.

 

Officer Compensation Arrangements

 

During fiscal 2020, Dr. Coccio was compensated at a rate of $150,000 per annum.

During fiscal 2020, Mr. Harshbarger was compensated at a rate of $220,000 per annum.

During fiscal 2020, Mr. Bagley was compensated at a rate of $155,000 per annum.

 

In addition, each named officer earned bonus compensation based on the achievement of certain operating objectives.

 

Outstanding Equity Awards at Fiscal Year End

 

Name  Number of Securities
Underlying Unexercised
Options (#) Exercisable
   Number of Securities
Underlying Unexercised
Options (#) Unexercisable
   Option
Exercise Price ($)
   Option
Expiration Date
 
Christopher L. Coccio                    
CEO, Chairman and Director   100,000         2.45    06/06/2029  
    100,000         2.65    09/03/2029  
                     
R. Stephen Harshbarger
President
        34,0001    0.91    07/20/2026 
         73,3332    1.06    05/18/2027 
                     
Stephen J. Bagley
Chief Financial Officer
       36,6673    0.91    07/20/2026 

 

 

1 These options vested on March 15, 2020 and have been exercised.

2 36,667 of these options vested on March 15, 2020 and have been exercised. 36,666 of these options will vest on March 15, 2021.

3 23,333 of these options vested on March 15, 2020 and have been exercised. 13,334 of these options will vest on March 15, 2021.

 

Estimated Payments and Benefits Upon Termination or Change in Control

 

On September 1, 2007, the Company entered into identical Executive Agreements with Stephen J. Bagley, Chief Financial Officer and Christopher L. Coccio, Chief Executive Officer. The Company also entered into an Executive Agreement with R. Stephen Harshbarger, President, on March 5, 2008. The agreements, as subsequently amended, provide that in the event of a change of control of the Company followed by a termination of the executives’ employment under certain circumstances, the officers shall receive severance payments equal to two years of the executive’s annual base, commissions and bonus compensation paid by the Company for the previous calendar year.

 

Based on last year’s salary arrangements, if the rights of the foregoing officers were to be triggered following a change of control, they would be entitled to the following payments from the Company: Stephen J. Bagley $334,000, Christopher L. Coccio $336,000 and R. Stephen Harshbarger $470,000.

 

25 

 

 

Severance Agreements

 

On October 20, 2017, the Company entered into identical Executive Agreements with Stephen J. Bagley, Chief Financial Officer, Christopher L. Coccio, Chief Executive Officer and R. Stephen Harshbarger, President. The agreements provide that in the event of termination of the executive’s employment, other than for the cause, the officers shall receive severance payments equal to two weeks of compensation for each full year employed by the Company.

 

Compensation of Directors

 

Each non-employee director receives $2,000 for each meeting attended. Directors who are employees of the Company receive no additional compensation for serving as directors. For the year ended February 29, 2020, director compensation was as follows:

2020 Director Compensation

 

Name  Fees
Earned
or Paid in
Cash ($)
   Stock
Awards
($)
   Option
Awards
($)
   Non-Equity
Incentive Plan
Compensation
($)
   Nonqualified
Deferred
Compensation
Earnings ($)
   All Other
Compensation
($)
   Total ($) 
Eric Haskell   8,000                        8,000 
Donald F. Mowbray   8,000                        8,000 
Carol O’Donnell   8,000        7,153                15,153 
Samuel Schwartz   6,000                        6,000 
Philip Strasburg   8,000        907                8,907 
Joseph Riemer   8,000        907                8,907 

 

 

Option awards in the above table are calculated using the Black-Scholes options pricing model which is further discussed in Note 4 – Stock Based Compensation, in the Company’s financial statements.

 

26 

 
ITEM 12 SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

 

The following information is furnished as of May 19, 2020 to indicate beneficial ownership of the Company's Common Stock by each Director, by each named executive officer, by all Directors and executive officers as a group, and by each person known to the Company to be the beneficial owner of more than 5% of the Company's outstanding Common Stock. Such information has been furnished to the Company by the indicated owners. Unless otherwise indicated, the named person has sole voting and investment power.

   Amount     
   Beneficially     
Name (and address if more than 5%) of Beneficial owner  Owned   Percent 
Directors and Officers          
*Stephen J. Bagley   51,291    ** 
*Christopher L. Coccio   547,7411   3.51% 
*R. Stephen Harshbarger   271,581    1.76% 
*Eric Haskell   15,0002   ** 
*Donald F. Mowbray   59,190    ** 
*Carol O’Donnell   9,0003   ** 
*Joseph Riemer   83,004    ** 
*Samuel Schwartz   1,340,5474   8.68% 
*Philip A. Strasburg   52,4125   ** 
All Executive Officers and Directors as a Group   2,367,1016   16.03% 
Additional 5% owners          
Emancipation Management LLC8
Charles Frumberg8
Circle N Advisors, LLC9
   6,865,1817   44.51% 
Richard A. Bayles10   840,536    5.45% 

 

The above ownership percentages are based on 15,422,985 shares outstanding as of May 19, 2020.

*c/o Sono-Tek Corporation, 2012 Route 9W, Milton, NY 12547.

** Less than 1%

1 Includes 2,000 shares held in the name of Dr. Coccio’s wife and 200,000 options currently exercisable issued under the Company’s Stock Incentive Plans.

2 Represents 15,000 options currently exercisable issued under the Company’s Stock Incentive Plans.

3 Represents 9,000 options currently exercisable issued under the Company’s Stock Incentive Plans.

4 Includes 30,000 options currently exercisable issued under the Company’s Stock Incentive Plans.

5 Includes 10,000 shares in the name of Mr. Strasburg’s wife.

6 The group total includes 254,000 options currently exercisable issued under the Company’s Stock Incentive Plans. The group total does not include 94,334 options that are currently unexercisable. The group total includes 74,777 shares held by Robb Engle, Executive Vice President and 7,493 shares held by Bennett Bruntil, a Vice President.

7Emancipation Management LLC, Charles Frumberg and Circle N Advisors share the power to dispose or to direct the disposition of these shares. The Company does not consider these holders to be “affiliates” of the Company.

8The address of this person is 299 Park Avenue, New York, NY 10171.

9 The address of this person is 1065 Main Street, Suite F, PO Box 336, Fishkill, NY 12524.

10The address of this person is 3697 Se Doubleton Drive, Stuart, FL 34997.

 

Securities Authorized for Issuance Under Equity Compensation Plans:

 

27 

 

EQUITY COMPENSATION PLAN INFORMATION

 

   Number of
securities to be
issued upon
exercise of
outstanding options,
warrants and rights
(a)
   Weighted-
average exercise
price of
outstanding options,
warrants and rights
(b)
   Number of
securities remaining
available for future
issuance under equity
compensation plans
(excluding securities
reflected in column (a))
(c)
 
Equity compensation plans approved by security holders:               
2013 Stock Incentive Plan   541,667   $1.87    1,453,400 
2003 Stock Incentive Plan   50,000   $0.66     
                
Total   591,667         1,453,400 

 

Description of Equity Compensation Plans:

 

2013 Stock Incentive Plan

 

Under the 2013 Stock Incentive Plan, as amended (the "2013 Plan"), options can be granted to officers, directors, consultants and employees of the Company and its subsidiaries to purchase up to 2,500,000 shares of the Company's common stock. Under the 2013 Plan options expire ten years after the date of grant. As of February 29, 2020, there were 541,667 options outstanding under the 2013 plan.

 

Under the 2013 Stock Incentive Plan, option prices must be at least 100% of the fair market value of the common stock at time of grant. For qualified employees, except under certain circumstances specified in the plan or unless otherwise specified at the discretion of the Board of Directors, no option may be exercised prior to one year after date of grant, with the balance becoming exercisable in cumulative installments over a three year period during the term of the option, and terminating at a stipulated period of time after an employee's termination of employment.

 

2003 Stock Incentive Plan

 

Under the 2003 Stock Incentive Plan, as amended (the "2003 Plan"), until May 2013, options were available to be granted to officers, directors, consultants and employees of the Company and its subsidiaries to purchase up to 1,500,000 of the Company's common shares. As of February 29, 2020, there were 50,000 options outstanding under the 2003 Plan, under which no additional options may be granted.

28 

 

 

ITEM 13 CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

 

Transactions with Related Persons – None

 

Independence of Directors

 

The Company’s Board of Directors is comprised of six “independent directors”, as that term is defined under NASDAQ rules, and two directors who are not “independent directors”. The Company’s “independent directors” are Samuel Schwartz, Donald Mowbray, Eric Haskell, Carol O’Donnell, Philip Strasburg and Joseph Riemer. Christopher L. Coccio and R. Stephen Harshbarger are current employees of the Company and therefore are not considered independent.

 

ITEM 14 PRINCIPAL ACCOUNTING FEES AND SERVICES

 

Audit Fees

 

For each of fiscal 2020 and fiscal 2019, the Company paid or accrued fees of approximately $46,500 for services rendered by Liggett & Webb, P.A., its independent auditors. These fees included audit and review services.

 

Audit Related Fees - None

 

Tax Fees

 

For each of fiscal 2020 and fiscal 2019, the Company paid or accrued tax preparation fees of approximately $5,500 for services rendered by Liggett & Webb, P.A., its independent auditors.

 

All Other Fees – None

 

Pre-Approval Policies and Procedures

 

The Audit Committee’s current policy is to pre-approve all audit and non-audit services that are to be performed and fees to be charged by the Company’s independent auditor to assure that the provision of these services does not impair the independence of the auditor. The Audit Committee pre-approved all audit and non-audit services rendered by the Company’s principal accountants in fiscal 2020 and fiscal 2019.

 

29 

 

PART IV

 

ITEM 15 EXHIBITS

 

Ex. No. Description
3(a)1 Certificate of Incorporation of the Company and all amendments thereto.
3(b)2 By-laws of the Company as amended.
10(a)1 Sono-Tek Corporation 2003 Stock Incentive Plan.
10(b)3 Equipment Line Credit Agreement between Sono-Tek Corporation and M&T Bank, dated March 24, 2005.
10(c)3 General Security Agreement between Sono-Tek Corporation and M&T Bank, dated December 21, 2004.
10(d)4 Executive Agreement between Sono-Tek Corporation and Stephen J. Bagley dated September 1, 2007.
10(e)4 Executive Agreement between Sono-Tek Corporation and Christopher L. Coccio dated September 1, 2007.
10(f)4 Executive Agreement between Sono-Tek Corporation and Joseph Riemer dated September 1, 2007.
10(g)5 Executive Agreement between Sono-Tek Corporation and R. Stephen Harshbarger dated March 5, 2008.
10(h)6 Amended Executive Agreement between Sono-Tek Corporation and R. Stephen Harshbarger dated March 8, 2012.
10(i)6 Equipment Term Note between Sono-Tek Corporation and M&T Bank dated June 17, 2011.   
10(j)7 Sono-Tek Corporation 2013 Stock Incentive Plan.
10(k)7 Form of Amended and Restated Mortgage dated December 16, 2013, between Sono-Tek Industrial Park LLC and M&T Bank.
10 (l)8 Form of Amended and Restated Term Note dated December 16, 2013, between Sono-Tek Industrial Park LLC and M&T Bank.
10(m)8 Form of Assignment of Rents dated December 16, 2013, between Sono-Tek Industrial Park LLC and M&T Bank.
10(n)8 Form of Environmental Compliance and Indemnification Agreement dated December 16, 2013, between Sono-Tek Industrial Park LLC and M&T Bank.
10(o)8 Form of Modification and Extension Agreement dated December 16, 2013, between Sono-Tek Industrial Park LLC and M&T Bank.
10(p)9 Amended Executive Agreement between Sono-Tek Corporation and Christopher L. Coccio dated August 24, 2014.
10(q)9 Amended Executive Agreement between Sono-Tek Corporation and R. Stephen Harshbarger dated August 24, 2014.
10(r)10 Amended Executive Agreement between Sono-Tek Corporation and Stephen J. Bagley dated May 21, 2015.
10(s)11 Amended Executive Agreement between Sono-Tek Corporation and Christopher L. Coccio dated November 17, 2016.
10(t)11 Amended Executive Agreement between Sono-Tek Corporation and R. Stephen Harshbarger dated November 17, 2016.
10(u)11 Amended Executive Agreement between Sono-Tek Corporation and Stephen J. Bagley dated November 17, 2016.
10(v)12 Letter Agreement between Sono-Tek Corporation and Christopher L. Coccio dated October 20, 2017.
10(w)12 Letter Agreement between Sono-Tek Corporation and R. Stephen Harshbarger dated October 20, 2017.
10(x)12 Letter Agreement between Sono-Tek Corporation and Stephen J. Bagley dated October 20, 2017.
10(y)13 Amended and Restated Loan Agreement between Sono-Tek Corporation and M&T Bank dated January 17, 2019.

30 

 

 

10(z)13 Addendum to Loan Agreement (Flexline) between Sono-Tek Corporation and M&T Bank dated January 17, 2019.
10(aa)13 Addendum to Loan Agreement (Loan Limit) between Sono-Tek Corporation and M&T Bank dated January 17, 2019.
10(bb)13 Loan Agreement between Sono-Tek Corporation and M&T Bank dated January 17, 2019.
10(cc)13 Amended and Restated Revolving Demand Note between Sono-Tek Corporation and M&T Bank dated January 17, 2019 .
10(dd)13 Security Agreement between Sono-Tek Corporation and M&T Bank dated January 17, 2019.
10(ee) 14 Term Note between Sono-Tek Corporation and M&T Bank dated April 16, 2020
1415 Code of Ethics.
2116 Subsidiaries of Issuer.
23.116 Consent of Liggett & Webb, P.A.
31.116 Rule 13a-14/15d – 14(a) Certification.
31.216 Rule 13a-14/15d – 14(a) Certification.
32.116 Certification pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
32.216 Certification pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
101.INS16 XBRL Instance Document.
101.SCH16 XBRL Taxonomy Extension Schema Document.
101.CAL16 XBRL Taxonomy Calculation Linkbase Document.
101.DEF16 XBRL Taxonomy Extension Definition Linkbase Document.
101.LAB16 XBRL Extension Label Linkbase Document.
101.PRE16 XBRL Taxonomy Extension Presentation Linkbase Document.

  

1 Incorporated herein by reference to the Company’s Registration Statement No. 333-11913 on Form S-8 filed on February 18, 2004.
2 Incorporated herein by reference to the Company’s Current Report on Form 8-K dated March 7, 2019 and filed with the Securities and Exchange Commission on March 13, 2019.
3 Incorporated herein by reference to the Company’s Form 10-KSB for the year ended February 28, 2005.
4 Incorporated herein by reference to the Company’s Form 10-QSB for the quarter ended August 31, 2007
5 Incorporated herein by reference to the Company’s Form 10-Q for the quarter ended May 31, 2008.
6 Incorporated herein by reference to the Company’s Form 10-K for the year ended February 29, 2012.
7 Incorporated herein by reference to Exhibit A to the Company’s definitive proxy statement filed with the Securities and Exchange Commission on July 25, 2013.
8 Incorporated herein by reference to the Company’s Form 10-K for the year ended February 29, 2014.
9 Incorporated herein by reference to the Company’s Form 10-K for the year ended February 29, 2015.
10 Incorporated herein by reference to the Company’s Form 10-K for the year ended February 29, 2016.
11 Incorporated herein by reference to the Company’s Form 10-K for the year ended February 28, 2017.
12 Incorporated herein by reference to the Company’s Form 10-K for the year ended February 28, 2018.
13  Incorporated herein by reference to the Company’s Form 10-K for the year ended February 28, 2019.
14 Incorporated herein by reference to the Company’s Current Report on Form 8-K dated April 17, 2020 and filed with the Securities and Exchange Commission on April 21, 2020.
15 Incorporated herein by reference to the Company’s Form 10-KSB for the year ended February 29, 2004.
16 Filed herewith.

 

ITEM 16 10-K SUMMARY

 

None.

 

31 

 

 

SONO-TEK CORPORATION

 

FORM 10-K

 

ITEM 7

 

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS AND SCHEDULES

 

FOR THE YEARS ENDED FEBRUARY 29, 2020 and FEBRUARY 28, 2019

 

 

 

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

 

CONSOLIDATED FINANCIAL STATEMENTS:

 

Consolidated Balance Sheets at February 29, 2020 and February 28, 2019

 

Consolidated Statements of Operations

For the Years Ended February 29, 2020 and February 28, 2019

 

Consolidated Statements of Stockholders' Equity

For the Years Ended February 29, 2020 and February 28, 2019

 

Consolidated Statements of Cash Flows

For the Years Ended February 29, 2020 and February 28, 2019

 

Notes to the Consolidated Financial Statements

 

32 

 

 

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

 

 

To the Board of Directors and Stockholders of

Sono-Tek Corporation

 

Opinion on the Financial Statements

 

We have audited the accompanying consolidated balance sheets of Sono-Tek Corporation (the "Company") as of February 29, 2020 and February 28, 2019, the related consolidated statements of operations, stockholders’ equity, and cash flows for the years then ended, and the related notes (collectively referred to as the "financial statements"). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company as of February 29, 2020 and February 28, 2019, and the results of its operations and its cash flows for the years then ended, in conformity with accounting principles generally accepted in the United States of America.

 

Basis for Opinion

 

These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the Company's financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) ("PCAOB") and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

 

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting in accordance with the standards of the PCAOB. As part of our audits we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company's internal control over financial reporting. Accordingly, we express no such opinion in accordance with the standards of the PCAOB.

 

Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

 

/s/ Liggett & Webb P.A.

LIGGETT & WEBB, P.A.

Certified Public Accountants

 

We have served as the Company’s auditor since 2012.

 

New York, NY

May 29, 2020

33 

 

 

SONO-TEK CORPORATION

CONSOLIDATED BALANCE SHEETS

 

   February 29, 2020   February 28, 2019 
ASSETS          
Current Assets:          
Cash and cash equivalents  $3,659,551   $3,144,123 
Marketable securities   4,219,240    2,365,706 
Accounts receivable (less allowance of $71,000 and $46,000, respectively)   929,701    1,397,891 
Inventories, net   2,381,891    1,658,016 
Prepaid expenses and other current assets   153,698    395,005 
Total current assets   11,344,081    8,960,741 
           
Land   250,000    250,000 
Buildings, net   1,654,061    1,731,547 
Equipment, furnishings and leasehold improvements, net   1,212,578    802,932 
Intangible assets, net   106,291    122,941 
Deferred tax asset   176,314    332,017 
           
TOTAL ASSETS  $14,743,325   $12,200,178 
           
LIABILITIES AND STOCKHOLDERS’ EQUITY          
           
Current Liabilities:          
Accounts payable  $668,721   $585,694 
Accrued expenses   1,613,409    632,706 
Customer deposits   1,648,690    1,149,558 
Current maturities of long term debt   169,716    162,816 
Income taxes payable   70,621    6,272 
           
Total current liabilities   4,171,157    2,537,046 
           
Deferred tax liability   251,761    370,757 
Long term debt, less current maturities   538,000    707,715 
           
Total Liabilities   4,960,918    3,615,518 
           

Commitments and Contingencies (Note 10)

        
           
Stockholders’ Equity          
Common stock, $.01 par value; 25,000,000 shares authorized, 15,348,180 and 15,197,563 issued and outstanding, respectively   153,482    151,976 
Additional paid-in capital   9,018,406    8,929,607 
Accumulated earnings (deficit)   610,519    (496,923)
           
Total stockholders’ equity   9,782,407    8,584,660 
           
TOTAL LIABILITIES AND STOCKHOLDERS’ EQUITY  $14,743,325   $12,200,178 

 

See notes to consolidated financial statements.

34 

 

 

SONO-TEK CORPORATION

CONSOLIDATED STATEMENTS OF OPERATIONS

 

   Fiscal Year Ended 
   February 29, 2020   February 28, 2019 
         
Net Sales  $15,354,619   $11,609,599 
Cost of Goods Sold   8,041,378    6,361,353 
Gross Profit   7,313,241    5,248,246 
           
Operating Expenses          
Research and product development   1,427,543    1,324,766 
Marketing and selling   3,403,133    2,686,382 
General and administrative   1,367,073    1,154,611 
Total Operating Expenses   6,197,749    5,165,759 
           
Operating Income   1,115,492    82,487 
           
Other Income (Expense):          
Interest Expense   (33,038)   (39,977)
Interest and Dividend Income   101,592    136,677 
Realized gain on sale of marketable securities       73,699 
Net unrealized loss on marketable securities       (100,184)
Other Income   29,401    28,732 
Income before Income Taxes   1,213,447    181,434 
           
Income Tax Expense   106,005    19,847 
           
Net Income  $1,107,442   $161,587 
           
Basic Earnings Per Share  $.07   $.01 
           
Diluted Earnings Per Share  $.07   $.01 
           
Weighted Average Shares – Basic   15,302,367    15,107,778 
           
Weighted Average Shares – Diluted   15,359,088    15,218,913 

 

See notes to consolidated financial statements.

35 

 

 

SONO-TEK CORPORATION

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY

YEARS ENDED FEBRUARY 29, 2020 AND FEBRUARY 28, 2019

 

   Common Stock
Par Value $.01
   Additional
Paid – In
   Accumulated
Other
Comprehensive
   Accumulated   Total
Stockholders’
 
   Shares   Amount   Capital   Income (Loss)   (Deficit) Earnings   Equity 
Balance – February 28, 2018   14,986,367   $149,864   $8,901,171   $101,605   $(760,115)  $8,392,525 
Reclassification of unrealized gain on marketable securities upon adoption of ASU 2016-01                  (101,605)   101,605     
Stock based compensation expense             30,548              30,548 
Exercise of stock options   211,196    2,112    (2,112)              
Net Income                       161,587    161,587 
Balance – February 28, 2019   15,197,563   $151,976   $8,929,607   $   $(496,923)  $8,584,660 
                               
Stock based compensation expense             90,305              90,305 
Exercise of stock options   150,617    1,506    (1,506)              
Net Income                       1,107,442    1,107,442 
Balance – February 29, 2020   15,348,180   $153,482   $9,018,406   $   $610,519   $9,782,407 

 

See notes to consolidated financial statements.

36 

 

 

SONO-TEK CORPORATION

CONSOLIDATED STATEMENTS OF CASH FLOWS

 

   Fiscal Year Ended 
   February 29, 2020   February 28, 2019 
CASH FLOWS FROM OPERATING ACTIVITIES:          
Net Income  $1,107,442   $161,587 
Adjustments to reconcile net income to net cash provided by (used in) operating activities:          
Depreciation and amortization   406,731    332,147 
Stock based compensation expense   90,305    30,548 
Bad debt expense   25,000     
Inventory reserve   (77,098)   66,000 
Unrealized loss on marketable securities       100,184 
Deferred tax expense   36,707    49,743 
(Increase) Decrease in:          
Accounts receivable   443,190    (623,113)
Inventories   (646,777)   (369,933)
Prepaid expenses and other assets   241,307    (255,599)
(Decrease) Increase in:          
Accounts payable and accrued expenses   1,063,730    (327,655)
Customer deposits   499,132    805,460 
Income taxes payable   64,349    (78,349)
Net Cash Provided by (Used In) Operating Activities   3,254,018    (108,980)
           
CASH FLOWS FROM INVESTING ACTIVITIES:          
Purchase of equipment, furnishings and leasehold improvements   (722,241)   (547,251)
Sale (purchase) of marketable securities   (1,853,534)   1,940,010 
Net Cash (Used In) Provided By Investing Activities   (2,575,775)   1,392,759 
           
CASH FLOWS FROM FINANCING ACTIVITIES:          
Repayment of long-term debt   (162,815)   (156,120)
Net Cash (Used In) Financing Activities   (162,815)   (156,120)
           
NET INCREASE IN CASH AND CASH EQUIVALENTS   515,428    1,127,659 
           
CASH AND CASH EQUIVALENTS:          
Beginning of year   3,144,123    2,016,464 
End of year  $3,659,551   $3,144,123 
           
           
Supplemental Cash Flow Disclosure:          
           
Interest Paid  $33,038   $39,977 
Income Taxes Paid  $4,948   $28,178 

 

See notes to consolidated financial statements.

37 

 

SONO-TEK CORPORATION

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

YEARS ENDED FEBRUARY 29, 2020 AND FEBRUARY 28, 2019

 

NOTE 1: BUSINESS DESCRIPTION

 

Sono-Tek Corporation (the “Company”, “Sono-Tek”, “We” or “Our”) was incorporated in New York on March 21, 1975. We are the world leader in the design and manufacture of ultrasonic coating systems for applying precise, thin film coatings to protect, strengthen or smooth surfaces on parts and components for the microelectronics/electronics, alternative energy, medical, industrial and emerging research & development/other markets. We design and manufacture custom-engineered ultrasonic coating systems and also provide patented nozzles and generators for manufacturers’ equipment.

 

NOTE 2: SIGNIFICANT ACCOUNTING POLICIES

 

Advertising Expenses - The Company expenses the cost of advertising in the period in which the advertising takes place. Advertising expense for fiscal 2020 and fiscal 2019 was $297,297 and $246,681, respectively.

 

Allowance for doubtful accounts - The Company records a bad debt expense/allowance based on management’s estimate of uncollectible accounts. All outstanding accounts receivable accounts are reviewed for collectability on an individual basis. The bad debt expense recorded for fiscal 2020 and fiscal 2019 was $25,000 and $0, respectively.

 

Cash and Cash Equivalents - Cash and cash equivalents consist of money market mutual funds, short term commercial paper and short-term certificates of deposit with original maturities of 90 days or less.

 

Concentration of Credit Risk - The Company does not believe that it is subject to any unusual or significant risks, in the normal course of business. The Company had three customers, which accounted for 30% of sales during fiscal 2020. Three customers accounted for 67% of the outstanding accounts receivables at February 29, 2020.

 

The Company had one customer, which accounted for 14% of sales during fiscal 2019. Two customers accounted for 41% of the outstanding accounts receivables at February 28, 2019.

 

Consolidation - The accompanying consolidated financial statements of the Company include the accounts of the Company and its wholly owned subsidiary, Sono-Tek Industrial Park, LLC (“SIP”). SIP operates as a real estate holding company for the Company’s real estate operations.

 

Earnings Per Share - Basic earnings per share (“EPS”) is computed by dividing net income by the weighted-average number of common shares outstanding for the period. Diluted EPS reflects the potential dilution that could occur if securities or other contracts to issue common stock were exercised or converted into common stock.

 

Equipment, Furnishings and Leasehold Improvements – Equipment, furnishings and leasehold improvements are stated at cost. Depreciation of equipment and furnishings is computed by use of the straight-line method based on the estimated useful lives of the assets, which range from three to five years.

 

Fair Value of Financial Instruments - The Company follows the guidance in the “Fair Value Measurements and Disclosure Topic” of the Accounting Standards Codification for assets and liabilities measured at fair value on a recurring basis. This guidance establishes a common definition for fair value to be applied to existing generally accepted accounting principles that require the use of fair value measurements, establishes a framework for measuring fair value and expands disclosure about such fair value measurements. The guidance defines fair value as the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. Additionally, the guidance requires the use of valuation techniques that maximize the use of observable inputs and minimize the use of unobservable inputs. These inputs are prioritized below:

 

38 

 

Level 1: Quoted prices in active markets.

 

Level 2: Observable market-based inputs or unobservable inputs that are corroborated by market data.

 

Level 3: Unobservable inputs for which there is little or no market data, which require the use of the reporting entity’s own assumptions.

 

The fair values of financial assets of the Company were determined using the following categories at February 29, 2020 and February 28, 2019, respectively:

 

   Level 1   Level 2   Level 3   Total 
                 
Marketable Securities – February 29, 2020  $3,565,629   $653,611   $   $4,219,240 
                     
Marketable Securities – February 28, 2019  $2,365,706       $   $2,365,706 

 

Marketable Securities include mutual funds, certificates of deposit and US Treasury securities, totaling $4,219,240 and $2,365,706 that are considered to be highly liquid and easily tradeable as of February 29, 2020 and February 28, 2019, respectively. Mutual funds & US Treasury securities are valued using inputs observable in active markets for identical securities and are therefore classified as Level 1 and certificates of deposit are classified as Level 2 within the Company’s fair value hierarchy. The Company’s marketable securities are considered to be available-for-sale investments as defined under ASC 320 “Investments – Debt and Equity Securities.”

 

Income Taxes - The Company accounts for income taxes under the asset and liability method. Under this method, deferred income taxes are recognized for the tax consequences of "temporary differences" by applying enacted statutory tax rates applicable to future years to differences between the financial statement carrying amounts and the tax basis of existing assets and liabilities. If it is more likely than not that some portion or all of a deferred tax asset will not be realized, a valuation allowance is recognized.

 

Intangible Assets -Include costs of patent applications which are deferred and charged to operations over seventeen years for domestic patents and twelve years for foreign patents. The accumulated amortization of patents is $171,210 and $160,433 at February 29, 2020 and February 28, 2019, respectively. Annual amortization expense of such intangible assets is expected to be approximately $11,000 per year for the next five years.

 

Inventories - Inventories are stated at the lower of cost or market. Cost is determined using the first-in, first-out (FIFO) method for raw materials, subassemblies and work-in-progress and the specific identification method for finished goods.

 

Land and Buildings – Land and buildings are stated at cost. Buildings are being depreciated by use of the straight-line method based on an estimated useful life of forty years.

 

Long-Lived Assets - The Company periodically evaluates the carrying value of long-lived assets, including intangible assets, when events and circumstances warrant such a review. The carrying value of a long-lived asset is considered impaired when the anticipated undiscounted cash flow from such asset is separately identifiable and is less than its carrying value. In that event, a loss is recognized based on the amount by which the carrying value exceeds the fair market value of the long-lived asset. Fair market value is determined primarily using the anticipated cash flows discounted at a rate commensurate with the risk involved.

 

39 

 

Management Estimates - The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

 

Marketable Securities - The Company adopted ASU 2016-01, “Financial Instruments – Overall: Recognition and Measurement of Financial Assets and Financial Liabilities.” ASU 2016-01 requires equity investments (except those accounted for under the equity method of accounting, or those that result in consolidation of the investee) to be measured at fair value with changes in fair value recognized in net income, requires public business entities to use the exit price notion when measuring the fair value of financial instruments for disclosure purposes, requires separate presentation of financial assets and financial liabilities by measurement category and form of financial asset, and eliminates the requirement for public business entities to disclose the method(s) and significant assumptions used to estimate the fair value that is required to be disclosed for financial instruments measured at amortized cost. The Company has evaluated the potential impact this standard may have on the consolidated financial statements and the fair value allowance of the securities from the prior year has been reclassified to Retained Earnings from Other Accumulated Comprehensive Income. The unrealized loss on the marketable securities during the year ended February 28, 2019 has been disclosed as a separate line item on the Income Statement.

 

New Accounting Pronouncements - In February 2016, the FASB issued ASU 2016-02, Leases (Topic 842), to increase transparency and comparability among organizations by recognizing a right-of-use asset and a lease liability on the balance sheet for all leases with terms longer than 12 months. Leases will be classified as either operating or financing, with such classification affecting the pattern of expense recognition in the income statement. ASU 2016-02 is effective for fiscal years and interim periods within those years beginning after December 15, 2018, and early adoption is permitted. The adoption of ASU 2016-02 had no material impact on the Company’s financial statements.

 

In February 2018, the FASB issued ASU 2018-02, Income Statement - Reporting Comprehensive Income (Topic 220), “Reclassification of Certain Tax Effects from Accumulated Other Comprehensive Income”. ASU 2018-02 was issued to allow the reclassification from accumulated other comprehensive income to retained earnings for the stranded tax effect resulting from the Tax Cuts and Jobs Act enacted on December 22, 2017. The Tax Cuts and Jobs Act, among other things, reduced the corporate tax rate from 35% to 21%, which required the re-evaluation of any deferred tax assets and liabilities at the lowered tax rate which potentially could leave a disproportionate tax effect in accumulated other comprehensive income. ASU 2018-02 allows for the election to reclassify these stranded tax effects to retained earnings. ASU 2018-02 is effective for all entities for fiscal years beginning after December 15, 2018, and interim periods within those fiscal years. Early adoption is permitted, including adoption in any interim period for public business entities for reporting periods for which financials statements have not yet been issued. The adoption of ASU 2018-02 had no material impact on the Company’s financial statements.

 

In December 2019, the FASB issued ASU 2019-12, “Income Taxes (Topic 740) - Simplifying the Accounting for Income Taxes.” The guidance issued in this update simplifies the accounting for income taxes by eliminating certain exceptions to the guidance in ASC 740 related to the approach for intra-period tax allocation, the methodology for calculating income taxes in an interim period and the recognition for deferred tax liabilities for outside basis differences. ASU 2019-12 also simplifies aspects of the accounting for franchise taxes and enacted changes in tax laws or rates and clarifies the accounting for transactions that result in a step-up in the tax basis of goodwill. The ASU will be effective for the Company on March 1, 2021, with early adoption permitted, and is not expected to have a significant impact on the Company’s financial statements.

 

Other than Accounting Standards Update (“ASU”) ASU 2016-02, ASU 2018-02 and ASU 2019-12 discussed above, all new accounting pronouncements issued but not yet effective have been deemed to be not applicable to the Company. Hence, the adoption of these new accounting pronouncements, once effective, is not expected to have an impact on the Company.

 

40 

 

Product Warranty - Expected future product warranty expense is recorded when the product is sold.

 

Reclassifications – Where appropriate, prior year’s financial statements reflect reclassifications to conform to the current year’s presentation.

 

Research and Product Development Expenses - Research and product development expenses represent engineering and other expenditures incurred for developing new products, for refining the Company's existing products and for developing systems to meet unique customer specifications for potential orders or for new industry applications and are expensed as incurred.

 

Shipping and Handling Costs – Shipping and handling costs are included in cost of sales in the accompanying consolidated statements of operations.

 

NOTE 3: REVENUE RECOGNITION

 

In May 2014, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) No. 2014-09, “Revenue from Contracts with Customers” (Topic 606), to clarify the principles of recognizing revenue and create common revenue recognition guidance between U.S. GAAP and International Financial Reporting Standards. Under ASU 2014-09, revenue is recognized when a customer obtains control of promised goods or services and is recognized at an amount that reflects the consideration expected to be received in exchange for such goods or services. In addition, ASU 2014-09 requires disclosure of the nature, amount, timing, and uncertainty of revenue and cash flows arising from contracts with customers. The ASU is effective for fiscal years beginning after December 15, 2017.

 

The new revenue standard is principle based and interpretation of those principles may vary from company to company based on their unique circumstances. It is possible that interpretation, industry practice, and guidance may evolve as companies and the accounting profession work to implement this new standard. The implementation of the standard did not have a material impact on the financial statements.

 

A majority of the Company’s sales revenue is derived primarily from short term contracts with customers, which, on average, are in effect for less than twelve months. Sales revenue from manufactured equipment transferred at a single point in time accounts for a majority of the Company’s revenue.

 

Sales revenue is recognized when control of the Company’s manufactured equipment is transferred to its customers, in an amount that reflects the consideration the Company expects to receive based upon the agreed transaction price. The Company’s performance obligations are satisfied when it’s customers take control of the purchased equipment, which is based on the contract terms. Based on prior experience, the Company reasonably estimates its sales returns and warranty reserves. Sales are presented net of discounts and allowances. Discounts and allowances are determined when a sale is negotiated. The Company does not grant its customers or independent representatives the ability to return equipment nor does it grant price adjustments after a sale is complete.

 

The Company does not capitalize any sales commission costs related to the acquisition of a contract. All commissions related to a performance obligation that are satisfied at a point in time are expensed when the customer takes control of the purchased equipment.

 

At February 29, 2020, the Company had received $1,649,000 in cash deposits, and had issued Letters of Credit in the amount of $701,000 to secure these cash deposits. At February 29, 2020, the Company was utilizing $701,000 of its available credit line to collateralize these letters of credit.

 

41 

 

The Company’s sales revenue, by product line is as follows:

 

   Twelve Months Ended 
   February 29,       February 28,     
   2020   % of total   2019   % of total 
Fluxing Systems  $906,000    6%   $1,176,000    10% 
Integrated Coating Systems   3,599,000    23%    1,449,000    13% 
Multi-Axis Coating Systems   6,866,000    45%    4,906,000    42% 
OEM Systems   1,384,000    9%    1,891,000    16% 
Other   2,600,000    17%    2,188,000    19% 
TOTAL  $15,355,000        $11,610,000      

 

NOTE 4: STOCK-BASED COMPENSATION

 

The Company adopted ASC 718, “Share Based Payments.” which requires companies to expense the value of employee stock options and similar awards.

 

During fiscal 2020, the Company granted options to acquire 17,500 shares to employees exercisable at prices ranging from $2.10 to $2.65, options to acquire 20,000 shares to the non-employee members of the board of directors with an exercise price of $2.65 and options for 200,000 shares to an officer and director exercisable at prices of ranging from $2.45 to $2.65. The options granted to employees and directors vest over three years and expire in ten years. The options granted to the officer vested upon grant and expire in ten years. The options granted by the Company during fiscal 2020 had a combined weighted average grant date fair value of $0.34 per share.

 

During fiscal 2019, the Company granted options to acquire 35,000 shares to employees exercisable at prices from $2.47 to $2.55 and options for 20,000 shares to a member of the board of directors with an exercise price of $3.00. The options vest annually over three years and expire in ten years. The fiscal 2019 options had a weighted average grant date fair value of $0.90 per share.

 

The weighted-average fair value of options has been estimated on the date of grant using the Black-Scholes options-pricing model. The weighted-average Black-Scholes assumptions are as follows:

 

   Fiscal Year Ended 
   February 29,
2020
   February 28,
2019
 
Expected life   1 - 8 years    8 years 
Risk free interest rate   1.58% - 2.05%    2.47% - 2.98% 
Expected volatility   27.46% - 32.24%    24.82% - 28.24% 
Expected dividend yield   0%    0% 

 

In computing the impact, the fair value of each option is estimated on the date of grant based on the Black-Scholes options-pricing model utilizing certain assumptions for a risk-free interest rate; volatility; and expected remaining lives of the awards. The assumptions used in calculating the fair value of share-based payment awards represent management’s best estimates, but these estimates involve inherent uncertainties and the application of management judgment. As a result, if factors change and the Company uses different assumptions, the Company’s stock-based compensation expense could be materially different in the future. In addition, the Company is required to estimate the expected forfeiture rate and only recognize expense for those shares expected to vest. In estimating the Company’s forfeiture rate, the Company analyzed its historical forfeiture rate, the remaining lives of unvested options, and the number of vested options as a percentage of total options outstanding. If the Company’s actual forfeiture rate is materially different from its estimate, or if the Company reevaluates the forfeiture rate in the future, the stock-based compensation expense could be significantly different from what the Company has recorded in the current period.

 

42 

 

For the years ended February 29, 2020 and February 28, 2019, net income and earnings per share reflect the actual deduction for stock-based compensation expense. The impact of applying ASC 718 was $90,305 and $30,548 in additional compensation expense for the years then ended, respectively. Such amount is included in general and administrative expenses on the statement of operations. The expense for stock-based compensation is a non-cash expense item.

 

NOTE 5: INVENTORIES

 

Inventories consist of the following:

 

   February 29,
2020
   February 28,
2019
 
Raw materials and subassemblies  $967,089   $873,483 
Finished goods   752,999    571,640 
Work in process   855,083    483,271 
Total   2,575,171    1,928,394 
Less: Allowance   (193,280)   (270,378)
Net inventories  $2,381,891   $1,658,016 

 

NOTE 6: BUILDINGS, EQUIPMENT, FURNISHINGS AND LEASEHOLD IMPROVEMENTS

 

Equipment, furnishings and leasehold improvements consist of the following:

 

   February 29,   February 28, 
   2020   2019 
Buildings  $2,250,000   $2,250,000 
Laboratory equipment   1,418,903    1,140,821 
Machinery and equipment   1,400,419    1,211,778 
Leasehold improvements   632,021    473,560 
Tradeshow and demonstration equipment   1,139,693    1,086,916 
Furniture and fixtures   1,088,502    1,044,222 
Totals   7,929,538    7,207,297 
Less: Accumulated depreciation   (5,062,899)   (4,672,818)
   $2,866,639   $2,534,479 

 

Depreciation expense for the years ended February 29, 2020 and February 28, 2019 was $390,082 and $382,777, respectively.

 

NOTE 7: ACCRUED EXPENSES

 

Accrued expenses consist of the following:

 

   February 29,
2020
   February 28,
2019
 
Accrued compensation  $585,875   $284,587 
Estimated warranty costs   339,275    62,500 
Accrued commissions   332,745    100,114 
Professional fees   74,492    65,049 
Other accrued expenses   281,022    120,456 
   $1,613,409   $632,706 

 

43 

 

NOTE 8: REVOLVING LINE OF CREDIT

 

The Company has a $1,500,000 revolving line of credit at prime which was 4.75% at February 29, 2020 and 5.50% at February 28, 2019. The revolving credit line is collateralized by the Company’s accounts receivable and inventory. The revolving credit line is payable on demand and must be retired for a 30-day period, once annually. If the Company fails to perform the 30-day annual pay down or if the bank elects to terminate the credit line, the bank may, at its option, convert the outstanding balance to a 36-month term note with payments including interest in 36 equal installments.

 

As of February 29, 2020, $701,000 of the Company’s credit line was being utilized to collateralize letters of credit issued to customers that have remitted cash deposits to the Company on existing orders. The letters of credit expire in 2020. As of February 29, 2020, there were no outstanding borrowings under the line of credit and the unused portion of the credit line was $799,000 as of February 29, 2020.

 

NOTE 9: LONG-TERM DEBT

 

Long-term debt consists of the following:

 

   February 29, 2020   February 28, 2019 
         
Note payable, bank, collateralized by land and buildings, payable in monthly installments of principal and interest of $16,358 through January 2024 with an interest rate of 4.15% and a 10-year term.   707,716    870,531 
           
Total long-term debt   707,716    870,531 
Due within one year   169,716    162,816 
Due after one year  $538,000   $707,715 

 

Long-term debt is payable as follows:

 

Fiscal Year ending February 28,    
2021   169,716 
2022   177,081 
2023   184,677 
2024   176,242 
   $707,716 

 

NOTE 10: COMMITMENTS AND CONTINGENCIES

 

The Company did not have any material commitments or contingencies as of February 29, 2020.

 

44 

 

NOTE 11: INCOME TAXES

 

The annual provision (benefit) for income taxes differs from amounts computed by applying the maximum U.S. Federal income tax rate of 21% to pre-tax income as follows:

 

   February 29,
2020
   February 28,
2019
 
Expected federal income tax  $254,898   $38,101 
State tax, net of federal   19,758    11,430 
Research and development tax credits   (213,521)   (19,588)
Permanent timing difference   29,632    2,272 
Change in valuation allowances   15,238    (36,425)
Other adjustments       24,057 
Income tax expense  $106,005   $19,847 

 

The deferred tax asset and liability are comprised of the following:

 

   February 29,
2020
   February 28,
2019
 
Deferred tax asset          
Inventory  $41,000   $74,000 
Allowance for accounts receivable   15,000    13,000 
Accrued expenses and other   94,000    37,000 
Research tax credits   27,000    208,000 
   Deferred tax asset – Long Term   177,000    332,000 
           
Deferred tax liability          
Intangible asset amortization       (25,000)
Building and leasehold depreciation   (252,000)   (346,000)
   Deferred tax liability – Long Term  $(252,000)  $(371,000)

 

Deferred income taxes have been provided by temporary differences between the carrying amounts of assets and liabilities for financial reporting purposes and the amounts used for tax purposes. To the extent allowed by GAAP, the Company provides a valuation allowance against the deferred tax assets for amounts when the realization is uncertain.

 

Tax returns for the prior three years are subject to examination by the IRS.

 

NOTE 12: STOCKHOLDERS’ EQUITY

 

Stock Options – Under the 2013 Stock Incentive Plan, as amended (the "2013 Plan"), options can be granted to officers, directors, consultants and employees of the Company and its subsidiaries to purchase up to 2,500,000 shares of the Company's common stock. Under the 2013 Plan options expire ten years after the date of grant. As of February 29, 2020, there were 541,667 options outstanding under the 2013 plan.

 

Under the 2003 Stock Incentive Plan, as amended (the "2003 Plan"), until May 2013, options were available to be granted to officers, directors, consultants and employees of the Company and its subsidiaries to purchase up to 1,500,000 of the Company's common shares. As of February 29, 2020, there were 50,000 options outstanding under the 2003 Plan, under which no additional options may be granted.

 

45 

 

Under the 2013 Stock Incentive Plan, option prices must be at least 100% of the fair market value of the common stock at time of grant. For qualified employees, except under certain circumstances specified in the plan or unless otherwise specified at the discretion of the Board of Directors, no option may be exercised prior to one year after date of grant, with the balance becoming exercisable in cumulative installments over a three-year period during the term of the option, and terminating at a stipulated period of time after an employee's termination of employment.

 

During fiscal 2020, the Company granted options to acquire 17,500 shares to employees exercisable at prices ranging from $2.10 to $2.65, options to acquire 20,000 shares to the non-employee members of the board of directors with an exercise price of $2.65 and options for 200,000 shares to an officer and director exercisable at prices of ranging from $2.45 to $2.65. The options granted to employees and directors vest over three years and expire in ten years. The options granted to the officer vested upon grant and expire in ten years.

 

During fiscal 2019, the Company granted options to acquire 35,000 shares to employees exercisable at prices from $2.47 to $2.55 and options for 20,000 shares to a member of the board of directors with an exercise price of $3.00. The options vest annually over three years and expire in ten years.

 

A summary of the activity of both plans for fiscal 2020 and fiscal 2019 is as follows:

 

           Weighted Average 
   Stock Options   Exercise Price $   Fair Value 
   Outstanding   Exercisable   Outstanding   Exercisable   Vested 
Balance - February 28, 2018   912,100    425,400   $0.96   $0.92   $0.35 
Granted   55,000         2.66           
Exercised   (371,100)        (0.96)          
Cancelled   (8,000)        (1.12)          
Balance - February 28, 2019   588,000    171,000   $1.10   $0.85   $0.34 
                          
Granted   237,500        $2.55           
Exercised   (231,333)        (0.88)          
Cancelled   (2,500)        (1.17)          
Balance - February 29, 2020   591,667    339,250   $1.77   $2.03   $0.35 

 

The intrinsic value of the Company’s options exercised during fiscal 2020 and fiscal 2019 was $44,082 and $111,218, respectively.

 

Information, at date of issuance, regarding stock option grants for fiscal 2020:

 

   Shares   Weighted
Average
Exercise
Price
   Weighted
Average
Fair
Value
 
Year ended February 29, 2020:               
  Exercise price exceeds market price            
  Exercise price equals market price   237,500   $2.55   $.34 
  Exercise price is less than market price            

 

The aggregate intrinsic value of the Company’s outstanding options at February 29, 2020 and February 28, 2019 was $150,752 and $169,608, respectively.

 

46 

 

The following table summarizes information about stock options outstanding and exercisable at February 29, 2020:

 

       Weighted Average     
   Number   Remaining Life   Exercise   Number 
   Outstanding   in Years   Price   Exercisable 
Range of exercise prices:                    
$0.61   45,000    2.69   $0.61    45,000 
$0.91 to $0.97   109,834    6.26   $0.91    2,500 
$1.05   22,500    3.97   $1.05    22,500 
$1.06   73,333    7.21   $1.06     
$1.15 to $1.67   48,500    6.15   $1.30    44,500 
$2.10 to $2.65   272,500    9.33   $2.54    215,750 
$3.00   20,000    8.71   $3.00    9,000 
Total Options:   591,667              339,250 

 

NOTE 13: EARNINGS PER SHARE

 

The following table sets forth the computation of basic and diluted earnings per share:

 

   February 29,
2020
   February 28,
2019
 
         
Numerator for basic and diluted earnings per share  $1,107,442   $161,587 
           
Denominator for basic earnings per share - weighted average   15,302,367    15,107,778 
           
Effects of dilutive securities:          
Stock options for employees, directors and outside consultants   56,721    111,135 
Denominator for diluted earnings per share   15,359,088    15,218,913 
           
Basic Earnings Per Share – Weighted Average  $0.07   $0.01 
           
Diluted Earnings Per Share – Weighted Average  $0.07   $0.01 

 

NOTE 14: OTHER COMPREHENSIVE INCOME (LOSS)

 

The Company adopted ASU 2016-01, “Financial Instruments – Overall: Recognition and Measurement of Financial Assets and Financial Liabilities” as of March 1, 2018. Among other requirements, ASU 2016-01 requires equity investments (except those accounted for under the equity method of accounting, or those that result in consolidation of the investee) to be measured at fair value with changes in fair value recognized in net income. As a result of the adoption of ASU 2016-01, the Company has reclassified the accumulated unrealized gains from Other Accumulated Comprehensive Income to Retained Earnings at March 1, 2018. For fiscal 2019, the unrealized loss on the marketable securities during the year has been disclosed as a separate line item on the Income Statement.

 

For fiscal 2019, the net unrealized loss on the Company’s available-for-sale marketable securities was approximately $100,000.

 

As of February 28, 2019, the unrealized gain on the Company’s available-for-sale marketable securities was approximately $1,000.

 

47 

 

NOTE 15: OTHER INCOME

 

Included in other income is the net revenue related to the rental of the Company’s real estate. For fiscal 2020, the Company’s rental revenue was $85,000, expenses were $56,000 and the net profit was $29,000.

 

For fiscal 2019, the Company’s rental revenue was $84,000, expenses were $61,000 and the net profit was $23,000.

 

NOTE 16: SIGNIFICANT CUSTOMERS AND FOREIGN SALES

 

Export sales to customers located outside the United States and Canada were approximately as follows:

 

   February 29,
2020
   February 28,
2019
 
Asia Pacific (APAC)   4,817,000    3,659,000 
Europe, Middle East, Asia (EMEA)   4,512,000    2,729,000 
Latin America   1,520,000    1,172,000 
   $10,849,000   $7,560,000 

 

During fiscal 2020 and fiscal 2019, sales to foreign customers accounted for approximately $10,849,000 and $7,560,000, or 71% and 65% respectively, of total revenues.

 

Three customers accounted for 30% of sales during fiscal 2020.

One customer accounted for 14% of the Company’s sales for fiscal 2019.

 

NOTE 17: SUBSEQUENT EVENTS

 

The Company has evaluated subsequent events through the filing of this Annual Report on Form 10-K, and determined that there have been no events that have occurred that would require adjustments to its disclosures in the consolidated financial statements except for the following items:

 

Option Exercises

 

In April 2020, 117,333 options were exercised on a cashless basis into 74,805 shares of common stock.

Paycheck Protection Program Loan

 

On April 17, 2020, the Company entered into a loan transaction pursuant to which it received proceeds of $1,001,640 (the “PPP Loan”) on May 8, 2020 under the Paycheck Protection Program (“PPP”). The PPP, established as part of the Coronavirus Aid, Relief and Economic Security Act (“CARES Act”), provides for loans to qualifying companies and is administered by the U.S. Small Business Administration (the “SBA”).

 

The PPL Loan is evidenced by a promissory note, dated as of April 17, 2020 (the “Note”), between the Company and M&T Bank (the “Lender”). The Note has a two-year term, bears interest at the rate of 1.0% per annum, and may be prepaid at any time without payment of any premium. No payments of principal or interest are due during the six-month period beginning on the date of the Note (the “Deferral Period”). Beginning on the seventh month following the date of the Note, the Company is required to make 18 monthly payments of principal and interest in the amount of $56,088.24.

 

Under the terms of the CARES Act, PPP loan recipients can apply for and be granted forgiveness for all or a portion of loan granted under the PPP, with such forgiveness to be determined, subject to limitations, based on the use of the loan proceeds for payment of payroll costs and any payments of mortgage interest, rent, and utilities. However, at least 75 percent of the PPP Loan proceeds must be used for eligible payroll costs. The terms of any forgiveness may also be subject to further requirements in any regulations and guidelines the SBA may adopt.

48 

 

 

In order to obtain forgiveness of the PPP Loan, the Company must submit a request and provide satisfactory documentation regarding its compliance with applicable requirements. While the Company currently believes that its use of the Note proceeds will meet the conditions for forgiveness under the PPP, no assurance is provided that the Company will obtain forgiveness of the Note in whole or in part. The Company must repay any unforgiven principal amount of the Note, with interest, on a monthly basis following the Deferral Period.

 

The Note contains customary events of default relating to, among other things, payment defaults and breaches of representations, warranties or covenants. The occurrence of an event of default may result in the repayment of all amounts outstanding, collection of all amounts owing from the Company, or filing suit and obtaining judgment against the Company.

 

Impact of Covid 19

 

In December 2019, the COVID-19 outbreak occurred in China and has since spread to other parts of the world. On March 11, 2020, the World Health Organization declared COVID-19 to be a global pandemic and recommended containment and mitigation measures. On March 13, 2020, the United States declared a national emergency concerning the outbreak. Along with these declarations, extraordinary and wide-ranging actions have been taken by international, federal, state, and local public health and governmental authorities to contain and combat the outbreak and spread of COVID-19 in regions across the United States and the world. These actions include quarantines, social distancing and “stay-at-home” orders, travel restrictions, mandatory business closures and other mandates that have substantially restricted individuals’ daily activities and curtailed or ceased many businesses’ normal operations.

 

In response to the pandemic and these actions, the Company began implementing changes in its business in March 2020 to protect its employees and customers:  

·The Company implemented social distancing and other health and safety protocols.
·The Company has flexed the workforce in its manufacturing operations based on business needs, including the addition of a second shift and the implementation of remote, alternative and flexible work arrangements.
·The Company has enhanced cleaning and sanitary procedures.
·The Company temporarily eliminated domestic and international travel.
·The Company restricted access to its facilities to only employees and essential non-employees with strict protocols.  

 

While all of these measures have been necessary and appropriate, they may result in additional costs and may adversely impact the Company’s business and financial performance. As the Company’s response to the pandemic evolves, the Company may incur additional costs and will potentially experience adverse impacts to its business, each of which may be significant. In addition, an extended period of remote work arrangements could impair the Company’s ability to effectively manage its business, and introduce additional operational risks, including, but not limited to, cybersecurity risks and increased vulnerability to security breaches, cyber-attacks, computer viruses, ransomware, or other similar events and intrusions.

 

The Company may experience, decreases in demand and customer orders for its products in all sales channels, as well as temporary disruptions and closures of our facilities due to decreased demand and government mandates.

 

49 

 

COVID-19 has also impacted various aspects of the supply chain as the Company’s suppliers experience similar business disruptions due to operating restrictions from government mandates. The Company continues to monitor procurement of raw materials and components used in the manufacturing, distribution and sale of our products, but continued disruptions in the supply chain due to COVID-19 may cause difficulty in sourcing materials or unexpected shortages or delays in delivery of raw materials and components, and may result in increased costs in our supply chain.

 

The Company has implemented plans to reduce spending in certain areas of its business, including reductions or delays in capital expenditures, reduced trade show participation costs, reduced travel expenditures and may need to take additional actions to reduce spending in the future.

 

The Company is closely monitoring and assessing the impact of the pandemic on its business. The extent of the impact on the Company’s results of operations, cash flow, liquidity, and financial performance, as well as the Company’s ability to execute near- and long-term business strategies and initiatives, will depend on numerous evolving factors and future developments, which are highly uncertain and cannot be reasonably predicted.

 

Given the inherent uncertainty surrounding COVID-19, the Company expects the pandemic may continue to have an adverse impact on the Company’s business in the near term. Should these conditions persist for a prolonged period, the COVID-19 pandemic, including any of the above factors and others that are currently unknown, may have a material adverse effect on the Company’s business, results of operations, cash flow, liquidity, and financial condition.

 

50 

 

SIGNATURES

 

In accordance with Section 13 or 15(d) of the Exchange Act, the Registrant has caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

Dated: May 29, 2020

Sono-Tek Corporation

(Registrant)

 

By: /s/ Dr. Christopher L. Coccio

Dr. Christopher L. Coccio,

Chief Executive Officer and Chairman

 

 

In accordance with the Exchange Act, this report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated.

 

/s/ Dr. Christopher L Coccio May 29, 2020 /s/ Samuel Schwartz May 29, 2020
Christopher L. Coccio   Samuel Schwartz  
Chief Executive Officer, Chairman and Director   Director  
       
/s/ Stephen J. Bagley May 29, 2020 /s/ Dr. Joseph Riemer May 29, 2020
Stephen J. Bagley   Dr. Joseph Riemer  
Chief Financial Officer   Director  
       
/s/ Carol O’Donnell May 29, 2020 /s/ Philip A. Strasburg May 29, 2020
Carol O’Donnell   Philip A. Strasburg  
Director   Director  
       
/s/ R. Stephen Harshbarger May 29, 2020 /s/ Dr. Donald F. Mowbray May 29, 2020
R. Stephen Harshbarger   Donald F. Mowbray  
President and Director   Director  
       
/s/ Eric Haskell May 29, 2020    
Eric Haskell      
Director      

 

51 

 

Exhibit 21

 

 

Subsidiaries of the Registrant

 

 

Name State of Organization
   
Sono-Tek Industrial Park LLC New York

 

 

 

Exhibit 23.1

 

CONSENT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

 

 

To the Board of Directors and Stockholders of

Sono-Tek Corporation

 

 

We consent to the use in connection with the Annual Report on Form 10-K of Sono-Tek Corporation, of our report dated May 29, 2020, relating to the financial statements of Sono-Tek Corporation, as of February 29, 2020 and February 28, 2019 and for the years then ended. We hereby consent to incorporation by reference, in Registration Statements Nos. 333-11913 and 333-216504 on Form S-8.

 

 

 

 

/s/ LIGGETT & WEBB, P.A.         

Certified Public Accountants

New York, New York

May 29, 2020

 

 

 

Exhibit 31.1

 

RULE 13a-14/15d – 14(a) CERTIFICATION

 

I, Christopher L. Coccio (principal executive officer), certify that:

 

1.I have reviewed this Annual Report on Form 10-K of Sono-Tek Corporation;

 

2.Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

 

3.Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for the periods presented in this report;

 

4.Sono-Tek Corporation’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d – 15(e) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f) for the registrant and have:

 

a) Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

 

b) Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

 

c) Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

 

d) Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

 

5.Sono-Tek Corporation’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing equivalent functions):

 

a.All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and

 

b.Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal controls over financial reporting.

 

Date: May 29, 2020

 

/s/ Christopher L. Coccio          

Christopher L. Coccio

Chief Executive Officer and Chairman

(principal executive officer)

 

Exhibit 31.2

 

RULE 13a-14/15d – 14(a) CERTIFICATION

 

I, Stephen J. Bagley (principal accounting officer), certify that:

 

1.I have reviewed this Annual Report on Form 10-K of Sono-Tek Corporation;

 

2.Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

 

3.Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for the periods presented in this report;

 

4.Sono-Tek Corporation’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d – 15(e) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f) for the registrant and have:

 

a) Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

 

b) Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

 

c) Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

 

d) Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

 

5.Sono-Tek Corporation’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing equivalent functions):

 

a) All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and

 

b) Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal controls over financial reporting.

 

Date: May 29, 2020

 

/s/ Stephen J. Bagley         

Stephen J. Bagley

Chief Financial Officer

(principal accounting officer)

 

Exhibit 32.1

 

CERTIFICATION PURSUANT TO

18 U.S.C. SECTION 1350,

AS ADOPTED PURSUANT TO

SECTION 906 OF THE SARBANES-OXLEY ACT OF 2002

 

In connection with the Annual Report of Sono-Tek Corporation on Form 10-K for the year ended February 29 2020 as filed with the Securities and Exchange Commission on the date hereof (the “Report”). I, Christopher L. Coccio, Chief Executive Officer and Chairman (principal executive officer) of the Company, certify, pursuant to 18 U.S.C. section 1350, as adopted pursuant to section 906 of the Sarbanes-Oxley Act of 2002, that:

 

(1)The Report fully complies with the requirements of section 13(a) and 15(d) of the Securities Exchange Act of 1934; and

 

(2)The information contained in the Report fairly presents, in all material respects, the financial condition and result of operations of the Company.

 

Date: May 29, 2020

 

/s/ Christopher L. Coccio       

Christopher L. Coccio

Chief Executive Officer and Chairman

(principal executive officer)

 

Exhibit 32.2

 

CERTIFICATION PURSUANT TO

18 U.S.C. SECTION 1350,

AS ADOPTED PURSUANT TO

SECTION 906 OF THE SARBANES-OXLEY ACT OF 2002

 

In connection with the Annual Report of Sono-Tek Corporation on Form 10-K for the year ended February 29, 2020 as filed with the Securities and Exchange Commission on the date hereof (the “Report”). I, Stephen J. Bagley, Chief Financial Officer (principal accounting officer) of the Company, certify, pursuant to 18 U.S.C. section 1350, as adopted pursuant to section 906 of the Sarbanes-Oxley Act of 2002, that:

 

(1)The Report fully complies with the requirements of section 13(a) and 15(d) of the Securities Exchange Act of 1934; and

 

(2)The information contained in the Report fairly presents, in all material respects, the financial condition and result of operations of the Company.

 

Date: May 29, 2020

 

/s/ Stephen J. Bagley        

Stephen J. Bagley

Chief Financial Officer

(principal accounting officer)

 

 

 

Corporate Headquarters
Sono-Tek Corporation

Sono-Tek Industrial Park

2012 Route 9W

Milton, NY 12547 USA

845-795-2020

www.sono-tek.com

2020 Annual Meeting

The Annual Meeting of Shareholders will is expected to be held as a virtual meeting or a combination of a virtual meeting and an in-person meeting. Consult Sono-Tek’s website for details for attending, www.sono-tek.com

Investor Relations

Investors, stockbrokers, security analysts and others seeking information should contact:

Stephen J. Bagley, CPA
Chief Financial Officer
Sono-Tek Corporation
info@sono-tek.com

Stephanie Prince

PCG Advisory, Inc.

www.pcgadvisory.com

Transfer Agent

For services such as reporting a change of address, replacement of lost stock certificates and changes in registered ownership, or for inquiries about your account, contact:

American Stock Transfer Company

6201 15th Ave.

Brooklyn NY 11219

www.amstock.com

Corporate Counsel
David M. Henkoff, Esq
Eilenberg & Krause LLP
11 East 44th Street
New York, NY 10017
www.eeklaw.com

Independent Accountants
Liggett & Webb, P.A.

307 7th Avenue, Suite 1601

New York, NY 10001

 

 

Executive Leadership

Christopher L. Coccio, PhD
Chairman and Chief Executive Officer

R. Stephen Harshbarger
President

Stephen J. Bagley, CPA
Chief Financial Officer

Robb Engle

Executive Vice President, Engineering

Bennett Bruntil

Vice President, Sales and Marketing

Chris Cichetti

Vice President, Applications Engineering

Board of Directors

Dr. Christopher L. Coccio

Chairman of the Board & Chief Executive Officer

R. Stephen Harshbarger
President

Dr. Joseph Riemer 2

Consultant, Retired President and Vice President, Food Business Development, Sono-Tek Corporation

Philip Strasburg, CPA 1*, 2

Former Partner, Anchin Block and Anchin, LLP

Carol O’Donnell 1

Chief Executive Officer of Protege Partners, LLC

Dr. Donald Mowbray 2*

Independent Science Consultant; Retired Director, Mechanical Engineering Laboratory, GE R&D Center

Eric Haskell, CPA 1

Retired, Executive Vice President and Chief Financial Officer, SunCom Wireless Holdings, Inc.

Samuel Schwartz

Emeritus Chairman of the Board

1 Audit Committee

2 Compensation Committee

* Committee Chairman