8-K

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C.  20549

                                                            

FORM 8-K


CURRENT REPORT
Pursuant To Section 13 OR 15(d) Of The Securities Exchange Act Of 1934

Date of report (Date of earliest event reported)	April 15, 2021
PATRICK INDUSTRIES, INC.
(Exact name of registrant as specified in its charter)

Indiana	000-03922	35-1057796
(State or other jurisdiction of incorporation)	(Commission File Number)	(IRS Employer Identification Number)

107 W. Franklin Street, P.O. Box 638	Elkhart,	Indiana	46515
(Address of Principal Executive Offices)			(Zip Code)

Registrant’s Telephone Number, including area code	(574)	294-7511
(Former name or former address if changed since last report)

Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions (see General Instruction A.2. below):

☐ Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425)

☐ Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12)

☐ Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b))

☐ Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c))

Securities registered pursuant to Section 12(b) of the Act:

Title of each class	Trading Symbol	Name of each exchange on which registered
Common Stock, no par value	PATK	NASDAQ

Indicate by check mark whether the registrant is an emerging growth company as defined in Rule 405 of the Securities Act of 1933 (§230.405 of this chapter) or Rule 12b-2 of the Securities Exchange Act of 1934 (§240.12b-2 of this chapter).            Emerging growth company ☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ¨

Item 7.01 Regulation FD Disclosure

The information referenced in this Form 8-K is furnished pursuant to Item 7.01, “Regulation FD Disclosure.” Such information, including the Exhibit attached hereto, shall not be deemed “filed” for purposes of Section 18 of the Securities Exchange Act of 1934, nor shall it be deemed incorporated by reference in any filing under the Securities Act of 1933, except as shall be expressly set forth by specific reference in such filing. 

(a) Press Release - Dated April 12, 2021 as contained in Exhibit 99.1

(b) Press Release - Dated April 15, 2021 as contained in Exhibit 99.2

Item 9.01     Financial Statements and Exhibits

(d)    Exhibits

Exhibit 99.1 - Press Release issued April 12, 2021

Exhibit 99.2 - Press Release issued April 15, 2021

Exhibit 104 - Cover Page Interactive Date File (embedded within the Inline XBRL document)

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.

PATRICK INDUSTRIES, INC.

(Registrant)

Date: April 15, 2021	By:	/s/ James E. Rose
		James E. Rose
		Principal Accounting Officer

EX-99.1

Patrick Industries, Inc. Completes Acquisition of Hyperform Inc. ELKHART, IN – April 12, 2021 - Patrick Industries, Inc. (NASDAQ: PATK) (“Patrick” or the “Company”) announced today that it has completed the acquisition of Hyperform Inc., a leading manufacturer of high-quality, non-slip foam flooring, operating under the SeaDek brand name, for the marine OEM market and aftermarket. Hyperform also serves the pool and spa, powersports and utility markets under the highly complementary brands of SwimDek and EndeavorDek (collectively, “SeaDek”). SeaDek operates out of two manufacturing facilities located in Rockledge, Florida and in Cocoa, Florida, which possess full marketing, laboratory, prototyping, and research and development capabilities. SeaDek had full-year 2020 revenues of approximately $25 million, and the Company expects the acquisition to be immediately accretive to net income per share. “We are extremely excited to partner with the industry-leading SeaDek team and continue to build out our portfolio of high quality marine component suppliers under our full solutions model,” said Andy Nemeth, President and Chief Executive Officer of Patrick. “These three brands specialize in creating innovative and highly functional products that use a high-grade, proprietary blended foam material, offering a safe, durable and comfortable alternative to traditional marine and specialty market flooring products. This acquisition provides significant opportunities for growth in both the OEM market and the aftermarket as well as additional resources and channels to further expand our marine products and accessories offerings to the markets we serve across the U.S. and internationally. Consistent with previous acquisitions, we will support SeaDek with a financial and operational foundation that will allow it to continue to capitalize on its core competencies while preserving the entrepreneurial spirit and brand that have been so important to its success.” Kurt Wilson, CEO of SeaDek, said, “My brother Jim and I, along with the rest of the SeaDek team, are pleased to join the Patrick family and continue the legacy of SeaDek after nearly four decades as a family-owned business. We look forward to partnering with Patrick, whose vast product offerings, resources and customer first approach will help to further grow the SeaDek brands, and offer an enhanced range of product solutions to our customers and markets.” The acquisition of SeaDek includes the acquisition of working capital, real estate and other assets and was funded under the Company’s credit facility. Patrick will continue to operate SeaDek on a stand- alone basis under its brand names in its existing facilities.

2 About Patrick Industries, Inc. Patrick Industries, Inc. is a major manufacturer and distributor of component products and building products serving the recreational vehicle, marine, manufactured housing, residential housing, high-rise, hospitality, kitchen cabinet, office and household furniture, fixtures and commercial furnishings, and other industrial markets and operates coast-to-coast in various locations throughout the United States and in Canada and China. Patrick’s major manufactured products include decorative vinyl and paper laminated panels, countertops, fabricated aluminum products, wrapped profile mouldings, slide-out trim and fascia, cabinet doors and components, hardwood furniture, fiberglass bath fixtures and tile systems, thermoformed shower surrounds, specialty bath and closet building products, fiberglass and plastic helm systems and component products, wiring and wire harnesses, boat covers, towers, tops and frames, electrical systems components including instrument and dash panels, softwoods lumber, interior passage doors, air handling products, RV painting, slotwall panels and components, fuel tanks, and CNC molds and composite parts and other products. The Company also distributes drywall and drywall finishing products, electronics and audio systems components, wiring, electrical and plumbing products, appliances, cement siding, raw and processed lumber, FRP products, interior passage doors, roofing products, tile, laminate and ceramic flooring, shower doors, furniture, fireplaces and surrounds, interior and exterior lighting products, various marine aftermarket products, and other miscellaneous products, in addition to providing transportation and logistics services. Cautionary Statement Regarding Forward-Looking Statements This press release contains certain statements related to future results, our intentions, beliefs and expectations or predictions for the future, which are forward-looking statements as that term is defined in the Private Securities Litigation Reform Act of 1995. Any projections of financial performance or statements concerning expectations as to future developments should not be construed in any manner as a guarantee that such results or developments will, in fact, occur. There can be no assurance that any forward-looking statement will be realized or that actual results will not be significantly different from that set forth in such forward-looking statement. Information about certain risks that could affect our business and cause actual results to differ from those expressed or implied in the forward-looking statements are contained in the section entitled “Risk Factors” in the Company’s Annual Report on Form 10-K for the year ended December 31, 2020, and in the Company's Forms 10-Q for subsequent quarterly periods, which are filed with the Securities and Exchange Commission (“SEC”) and are available on the SEC’s website at www.sec.gov. Each forward-looking statement speaks only as of the date of this press release, and we undertake no obligation to update any forward-looking statement to reflect events or circumstances occurring after the date on which it is made. Contact: Julie Ann Kotowski Investor Relations kotowskj@patrickind.com / 574.294.7511

EX-99.2

Patrick Industries, Inc. Announces First Quarter 2021 Earnings Release and Conference Call Webcast on April 29, 2021 ELKHART, IN – April 15, 2021 - Patrick Industries, Inc. (NASDAQ: PATK), a major manufacturer and distributor of building and component products for the recreational vehicle, marine, manufactured housing and industrial markets, expects to release its first quarter 2021 financial results before the market opens on Thursday, April 29, 2021. Patrick Industries also expects to host a conference call on Thursday, April 29, 2021 at 10:00 a.m. Eastern Time to discuss results and other business matters. Participants on the call will be Andy Nemeth – President and Chief Executive Officer, and Jake Petkovich – Chief Financial Officer. Participation in the question-and-answer session of the call will be limited to institutional investors and analysts. The dial-in number for the live conference call is (877) 407-9036. Interested parties are invited to listen to a live webcast of the call on Patrick’s website at www.patrickind.com under “Investor Relations.” A replay of the conference call will also be available via the Company’s investor relations website. About Patrick Industries, Inc. Patrick Industries, Inc. is a major manufacturer and distributor of component products and building products serving the recreational vehicle, marine, manufactured housing, residential housing, high-rise, hospitality, kitchen cabinet, office and household furniture, fixtures and commercial furnishings, and other industrial markets and operates coast- to-coast in various locations throughout the United States and in Canada and China. Patrick's major manufactured products include decorative vinyl and paper laminated panels, countertops, fabricated aluminum products, wrapped profile mouldings, slide-out trim and fascia, cabinet doors and components, hardwood furniture, fiberglass bath fixtures and tile systems, thermoformed shower surrounds, specialty bath and closet building products, fiberglass and plastic helm systems and component products, wiring and wire harnesses, boat covers, towers, tops and frames, electrical systems components including instrument and dash panels, softwoods lumber, interior passage doors, air handling products, RV painting, slotwall panels and components, fuel tanks, and CNC molds and composite parts and other products. The Company also distributes drywall and drywall finishing products, electronics and audio systems components, wiring, electrical and plumbing products, appliances, cement siding, raw and processed lumber, FRP products, interior passage doors, roofing products, tile, laminate and ceramic flooring, shower doors, furniture, fireplaces and surrounds, interior and exterior lighting products, various marine aftermarket products, and other miscellaneous products, in addition to providing transportation and logistics services. Forward-Looking Statements This press release contains certain statements related to future results, our intentions, beliefs and expectations or predictions for the future, which are forward-looking statements as that term is defined in the Private Securities Litigation Reform Act of 1995. Any projections of financial performance or statements concerning expectations as to future developments should not be construed in any manner as a guarantee that such results or developments will, in fact, occur. There can be no assurance that any forward-looking statement will be realized or that actual results will not be significantly different from that set forth in such forward-looking statement. Information about certain risks that could affect our business and cause actual results to differ from those expressed or implied in the forward-looking statements are contained in the section entitled “Risk Factors” in the Company’s Annual Report on Form 10-K for the year ended December 31, 2020, and in the Company's Forms 10-Q for subsequent quarterly periods, which are filed with the Securities and Exchange Commission (“SEC”) and are available on the SEC’s website at www.sec.gov. Each forward-looking statement speaks only as of the date of this press release, and we undertake no obligation to update any forward-looking statement to reflect events or circumstances occurring after the date on which it is made. Contact: Julie Ann Kotowski Investor Relations 574.294.7511 / kotowskj@patrickind.com

XML

Cover Document	Apr. 15, 2021
Document Entity Information [Abstract]
Entity Central Index Key	0000076605
Document Type	8-K
Document Period End Date	Apr. 15, 2021
Entity Registrant Name	PATRICK INDUSTRIES, INC.
Entity Incorporation, State or Country Code	IN
Entity File Number	000-03922
Entity Tax Identification Number	35-1057796
Entity Address, Address Line One	107 W. Franklin Street, P.O. Box 638
Entity Address, City or Town	Elkhart,
Entity Address, State or Province	IN
Entity Address, Postal Zip Code	46515
City Area Code	(574)
Local Phone Number	294-7511
Written Communications	false
Soliciting Material	false
Pre-commencement Tender Offer	false
Pre-commencement Issuer Tender Offer	false
Title of 12(b) Security	Common Stock, no par value
Trading Symbol	PATK
Security Exchange Name	NASDAQ
Entity Emerging Growth Company	false
Amendment Flag	false