NOTE 1 - BUSINESS AND SUMMARY OF ACCOUNTING POLICIES

Basis of Financial Statement Presentation

The accompanying unaudited consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States of America (“GAAP”) for interim financial information, and with the rules and regulations of the Securities and Exchange Commission (“SEC”) regarding interim financial reporting. Accordingly, these interim financial statements do not include all of the information and footnotes required by GAAP for complete financial statements. In the opinion of the management of the Company, as defined below, these unaudited consolidated financial statements include all adjustments necessary to present fairly the information set forth therein. All such adjustments are of a normal recurring nature. Results for interim periods are not necessarily indicative of results to be expected for a full year.

The consolidated balance sheet information as of December 31, 2014 was derived from the audited consolidated financial statements included in the Company’s Annual Report on Form 10-K for the year ended December 31, 2014 (“2014 Form 10-K”). The interim financial statements contained herein should be read in conjunction with the 2014 Form 10-K.

The consolidated financial statements have been reported in U.S. dollars by translating asset and liability amounts of a foreign wholly-owned subsidiary at the closing exchange rate, equity amounts at historical rates and the results of operations and cash flow at the average of the prevailing exchange rates during the periods reported. As a result, the Company is exposed to foreign currency translation gains or losses. These gains or losses are presented in the Company’s consolidated financial statements as “Other comprehensive income (loss) - foreign currency translation adjustments”.

Principles of Consolidation

The unaudited consolidated financial statements contained herein include the accounts of P&F Industries, Inc. and its subsidiaries, (“P&F” or the “Company”). All significant intercompany balances and transactions have been eliminated. Certain amounts in the consolidated financial statements have been reclassified to conform to classifications used in the current period.

The Company

P&F is a Delaware corporation incorporated on April 19, 1963, that operates in two primary lines of business or segments: (i) tools and other products (“Tools”) and (ii) hardware and accessories (“Hardware”).

Tools

The Company conducts its Tools business through a wholly-owned subsidiary, Continental Tool Group, Inc. (“Continental”), which in turn operates through its wholly-owned subsidiaries, Florida Pneumatic Manufacturing Corporation (“Florida Pneumatic”) and Hy-Tech Machine, Inc. (“Hy-Tech”). During the third quarter of 2014, the Company acquired Exhaust Technologies Inc. (“ETI”) and Universal Air Tool Company Limited (“UAT”). Both ETI and UAT are wholly-owned subsidiaries of Florida Pneumatic, and unless otherwise indicated, the operations and results of operations of Florida Pneumatic herein include ETI and UAT as of the respective dates such companies were acquired. Additionally, during the third quarter of 2014, the Company acquired substantially all the assets of Air Tool Service Company (“ATSCO”), which business operates through a wholly-owned subsidiary of Hy-Tech. Unless otherwise indicated, the results of operations of Hy-Tech herein include ATSCO from the date the business was acquired.

Florida Pneumatic is engaged in the importation and sale of pneumatic hand tools, primarily for the retail, industrial and automotive markets, and the importation and sale of compressor air filters. Florida Pneumatic also markets, through its Berkley Tool division (“Berkley”), a product line which includes pipe and bolt dies, pipe taps, wrenches, vises and stands, pipe and tubing cutting equipment, hydrostatic test pumps, and replacement electrical components for a widely-used brand of pipe cutting and threading machines.

Hy-Tech manufactures and distributes its own line of industrial pneumatic tools. Hy-Tech also produces and markets impact wrenches, grinders, drills, and motors. Further, it also manufactures tools to customer specifications. Its customers include refineries, chemical plants, power generation facilities, heavy construction enterprises, oil and gas and mining companies. In addition, Hy-Tech manufactures an extensive line of pneumatic tool replacement parts that are sold to original equipment manufacturers (“OEMs”). It also manufactures and distributes high pressure stoppers for hydrostatic testing fabricated pipe, gears, sprockets, splines and racks and produces a line of siphons.

Hardware

The Company conducts its Hardware business through a wholly-owned subsidiary, Countrywide Hardware, Inc. (“Countrywide”). Countrywide conducts its business operations through its wholly-owned subsidiary, Nationwide Industries, Inc. (“Nationwide”). Nationwide is an importer and manufacturer of door, window and fencing hardware and accessories, including rollers, hinges, window operators, sash locks, custom zinc castings and door closers. Nationwide’s products are sold through in-house sales personnel and manufacturers’ representatives to distributors, retailers and OEM customers. End users of Nationwide’s products include contractors, home builders, pool and patio distributors, OEM/private label customers and general consumers.

Management Estimates

The preparation of financial statements and related disclosures in conformity with GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities as of the date of the financial statements and the reported amounts of revenues and expenses in those financial statements. Certain significant accounting policies that contain subjective management estimates and assumptions include those related to revenue recognition, inventory, goodwill, intangible assets and other long-lived assets, income taxes and deferred taxes. Descriptions of these policies are discussed in the Company’s 2014 Form 10-K. Management evaluates its estimates and assumptions on an ongoing basis using historical experience and other factors, including the current economic environment, and makes adjustments when facts and circumstances dictate. As future events and their effects cannot be determined with precision, actual results could differ significantly from those estimates and assumptions. Significant changes, if any, in those estimates resulting from continuing changes in the economic environment will be reflected in the consolidated financial statements in future periods.

Recently issued Accounting Pronouncements

In September 2015, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) 2015-16, “Business Combinations (Topic 805): Simplifying the Accounting for Measurement-Period Adjustments” (“ASU 2015-16”). ASU 2015-16 requires an acquirer in a business combination to recognize adjustments to the provisional amounts identified during the measurement period in the reporting period in which the adjustment amounts are determined. The acquirer is also required to either present separately on the face of the income statement or disclose in the notes to the financial statements the portion of the amounts recorded in the current-period earnings by line item that would have been recorded in previous periods if the adjustment to the provisional amounts had been recognized as of the acquisition date. Under current U.S. GAAP, the acquirer is required to retrospectively adjust provisional amounts recognized at the acquisition date with a corresponding adjustment to goodwill. ASU 2015-16 is effective for annual periods beginning after December 31, 2015, with early application permitted, and shall apply to adjustments to provisional amounts that occur after the effective date. The Company is currently assessing the impact the adoption of ASU 2015-16 will have on future financial statements and related disclosures.

In July 2015, the FASB issued ASU 2015-11, “Inventory (Topic 330): Simplifying the Measurement of Inventory,” which applies to inventory that is measured using first-in, first-out (“FIFO”) or average cost. Under the updated guidance, an entity should measure inventory that is within scope at the lower of cost or net realizable value, which is the estimated selling prices in the ordinary course of business, less reasonably predictable costs of completion, disposal and transportation. Subsequent measurement is unchanged for inventory that is measured using last-in, last-out (“LIFO”). This ASU is effective for annual and interim periods beginning after December 15, 2016, and should be applied prospectively with early adoption permitted at the beginning of an interim or annual reporting period. The Company is currently evaluating the impact of adopting this guidance.

In April 2015, the FASB issued ASU 2015-03, Interest - Imputation of Interest (Subtopic 835-30): Simplifying the Presentation of Debt Issuance Costs ("ASU 2015-03"), in order to simplify the presentation of debt issuance costs. The ASU requires debt issuance costs to be presented on the balance sheet as a direct deduction from the related debt liability rather than an asset. ASU 2015-03 is effective for public companies for annual periods beginning after December 15, 2015, and interim periods thereafter, with early adoption permitted. The guidance also requires retrospective application to all prior periods presented. The adoption of this new guidance is not expected to have a material impact on the Company’s consolidated financial statements. However, in August 2015, the FASB issued Accounting Standards Update 2015-15, Interest—Imputation of Interest (Subtopic 835-30) “Presentation and Subsequent Measurement of Debt Issuance Costs Associated with Line-of-Credit” (“ASU 2015-15”). ASU 2015-15 clarifies that the SEC Staff would not object to an entity deferring and presenting debt issuance costs as an asset and subsequently amortizing the deferred debt issuance costs ratably over the term of the line-of-credit arrangement, regardless of whether there are any outstanding borrowings on the line-of-credit arrangement.

In May 2014, the FASB issued ASU Update No. 2014-09 (“ASU 2014-09”), Revenue from Contracts with Customers (Topic 606), which requires an entity to recognize the amount of revenue to which it expects to be entitled for the transfer of promised goods or services to customers. ASU 2014-09 will replace most existing revenue recognition guidance in GAAP when it becomes effective. The new standard was to become effective for annual and interim periods in fiscal years beginning after December 15, 2016. In April 2015, the FASB proposed deferring the effective date of ASU 2014-09 for one year, and proposed some modifications to the original provisions. On July 9, 2015, the one year deferral of the effective date was approved, and as such ASU 2014-09 is effective for our first quarter of fiscal year 2018 using either the retrospective or cumulative effect transition method. We are evaluating the effect that ASU 2014-09 will have on our consolidated financial statements and related disclosures. We have not yet selected a transition method nor have we determined the effect of the standard on our ongoing financial reporting.