‌​

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

☒ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d)

OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2023

OR

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d)

OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from to

Commission file number 1-5467

VALHI, INC.

(Exact name of Registrant as specified in its charter)

Delaware	87-0110150
(State or other jurisdiction of Incorporation or organization)	(IRS Employer Identification No.)

5430 LBJ Freeway, Suite 1700,

Dallas, Texas 75240-2620

(Address of principal executive offices) 

Registrant’s telephone number, including area code: (972) 233-1700

Securities registered pursuant to Section 12(b) of the Act:

Title of each class	Trading Symbol(s)	Name of each exchange on which registered
Common stock	VHI	NYSE

No securities registered pursuant to Section 12(g) of the Act:

Indicate by check mark:

If the Registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.   Yes  ☐    No  ☒

If the Registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  ☐    No  ☒

Whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  ☒    No  ☐

Whether the Registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).   Yes  ☒    No  ☐

Whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer”, “accelerated filer,” smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Act.

Large accelerated filer	☐	Accelerated filer	☐
Non-accelerated filer	☒	Smaller reporting company	☐
Emerging growth company	☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☒

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

Whether the Registrant is a shell company (as defined in Rule 12b-2 of the Act).  Yes  ☐   No  ☒.

The aggregate market value of the 2.4 million shares of voting common stock held by nonaffiliates of Valhi, Inc. as of June 30, 2023 (the last business day of the Registrant’s most recently-completed second fiscal quarter) approximated $31.2 million.

Number of shares of the registrant’s common stock, $.01 par value per share, outstanding on March 1, 2024: 28,288,493.

Documents incorporated by reference

The information required by Part III is incorporated by reference from the Registrant’s definitive proxy statement to be filed with the Commission pursuant to Regulation 14A not later than 120 days after the end of the fiscal year covered by this report.

‌​

PART I

ITEM 1.BUSINESS

Valhi, Inc. (NYSE: VHI) is primarily a holding company. We operate through our wholly-owned and majority-owned subsidiaries, including NL Industries, Inc., Kronos Worldwide, Inc., CompX International Inc., Basic Management, Inc. and The LandWell Company. Kronos (NYSE: KRO), NL (NYSE: NL) and CompX (NYSE American: CIX) each file periodic reports with the U.S. Securities and Exchange Commission (SEC).

Our principal executive offices are located at Three Lincoln Center 5430 LBJ Freeway, Suite 1700, Dallas, Texas 75240-2620. Our telephone number is (972) 233-1700. We maintain a website at www.valhi.net.

Brief History

LLC Corporation, our legal predecessor, was incorporated in Delaware in 1932. We are the successor company of the 1987 merger of LLC Corporation and another entity controlled by Contran Corporation. One of Contran’s wholly-owned subsidiaries held approximately 91% of Valhi’s outstanding common stock at December 31, 2023. As discussed in Note 1 to our Consolidated Financial Statements, Lisa K. Simmons and a trust established for the benefit of Ms. Simmons and her late sister and their children (the “Family Trust”) may be deemed to control Contran and us.

Key events in our history include:

● 1979 – Contran acquires control of LLC;

● 1981 – Contran acquires control of our other predecessor company;

● 1982 – Contran acquires control of Keystone Consolidated Industries, Inc., a predecessor to CompX;

● 1984 – Keystone spins-off an entity that includes what is to become CompX; this entity subsequently merges with LLC;

● 1986 – Contran acquires control of NL, which at the time owns 100% of Kronos;

● 1987 – LLC and another Contran controlled company merge to form Valhi, our current corporate structure;

● 2003 – NL completes the spin-off of Kronos through the pro-rata distribution of Kronos shares to its shareholders including us;

● 2004 through 2005 – NL distributes Kronos shares to its shareholders, including us, through quarterly dividends;

● 2010 – Kronos completes a secondary offering of its common stock lowering our ownership of Kronos to 80%;

● 2012 – In December CompX completes the sale of its furniture components business;

● 2013 – In December we purchased an additional ownership interest in and became the majority owner of Basic Management, Inc. and The LandWell Company;

● 2015 – The first homes in our Cadence planned community were completed by third-party builders and sold to the public;

● 2020 – In December LandWell completed the first bulk sale of land within the Cadence planned community;

● 2022 – In July Basic Water Company (BWC) ceased water delivery due to a decline in water levels at Lake Mead in Nevada and in September BWC filed for bankruptcy protection; and

● 2023 – In November, upon the Bankruptcy Court’s approval of BWC’s plan of reorganization, BWC sold substantially all of its assets. In December BMI sold Basic Power Company.

-1-

‌​

Unless otherwise indicated, references in this report to “we”, “us” or “our” refer to Valhi, Inc. and its subsidiaries, taken as a whole.

Forward-Looking Statements

This Annual Report on Form 10-K contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, as amended. Statements in this Annual Report that are not historical facts are forward-looking in nature and represent management’s beliefs and assumptions based on currently available information. In some cases, you can identify forward-looking statements by the use of words such as “believes,” “intends,” “may,” “should,” “could,” “anticipates,” “expects” or comparable terminology, or by discussions of strategies or trends. Although we believe the expectations reflected in such forward-looking statements are reasonable, we do not know if these expectations will be correct. Such statements by their nature involve substantial risks and uncertainties that could significantly impact expected results. Actual future results could differ materially from those predicted. The factors that could cause actual future results to differ materially from those described herein are the risks and uncertainties discussed in this Annual Report and those described from time to time in our other filings with the SEC and include, but are not limited to, the following:

● Future supply and demand for our products;

● The extent of the dependence of certain of our businesses on certain market sectors;

● The cyclicality of certain of our businesses (such as Kronos’ TiO₂ operations);

● Customer and producer inventory levels;

● Unexpected or earlier-than-expected industry capacity expansion (such as the TiO₂ industry);

● Changes in raw material and other operating costs (such as ore, zinc, brass, aluminum, steel and energy costs);

● Changes in the availability of raw materials (such as ore);

● General global economic and political conditions that harm the worldwide economy, disrupt our supply chain, increase material and energy costs, reduce demand or perceived demand for TiO_2, component products and land held for development or impair our ability to operate our facilities (including changes in the level of gross domestic product in various regions of the world, natural disasters, terrorist acts, global conflicts and public health crises);

● Operating interruptions (including, but not limited to, labor disputes, leaks, natural disasters, fires, explosions, unscheduled or unplanned downtime, transportation interruptions, certain regional and world events or economic conditions and public health crises);

● Technology related disruptions (including, but not limited to, cyber-attacks; software implementation, upgrades or improvements; technology processing failures; or other events) related to our technology infrastructure that could impact our ability to continue operations, or at key vendors which could impact our supply chain, or at key customers which could impact their operations and cause them to curtail or pause orders;

● Competitive products and substitute products;

● Customer and competitor strategies;

● Potential difficulties in integrating future acquisitions;

● Potential difficulties in upgrading or implementing accounting and manufacturing software systems;

● Potential consolidation of our competitors;

● Potential consolidation of our customers;

● The impact of pricing and production decisions;

-2-

‌​

● Competitive technology positions;

● Our ability to protect or defend intellectual property rights;

● The introduction of trade barriers or trade disputes;

● The ability of our subsidiaries to pay us dividends;

● Uncertainties associated with new product development and the development of new product features;

● Fluctuations in currency exchange rates (such as changes in the exchange rate between the U.S. dollar and each of the euro, the Norwegian krone and the Canadian dollar and between the euro and the Norwegian krone) or possible disruptions to our business resulting from uncertainties associated with the euro or other currencies;

● Decisions to sell operating assets other than in the ordinary course of business;

● The timing and amounts of insurance recoveries;

● Our ability to renew, amend, refinance or establish credit facilities;

● Increases in interest rates;

● Our ability to maintain sufficient liquidity;

● The ultimate outcome of income tax audits, tax settlement initiatives or other tax matters, including future tax reform;

● Our ability to utilize income tax attributes, the benefits of which may or may not have been recognized under the more-likely-than-not recognition criteria;

● Environmental matters (such as those requiring compliance with emission and discharge standards for existing and new facilities, or new developments regarding environmental remediation or decommissioning obligations at sites related to our former operations);

● Government laws and regulations and possible changes therein (such as changes in government regulations which might impose various obligations on former manufacturers of lead pigment and lead-based paint, including NL, with respect to asserted health concerns associated with the use of such products) including new environmental, health, safety, sustainability or other regulations (such as those seeking to limit or classify TiO₂ or its use);

● The ultimate resolution of pending litigation (such as NL’s lead pigment and environmental matters);

● Our ability to comply with covenants contained in our revolving bank credit facilities;

● Our ability to complete and comply with the conditions of our licenses and permits;

● Changes in real estate values and construction costs in Henderson, Nevada; and

● Pending or possible future litigation or other actions.

Should one or more of these risks materialize (or the consequences of such development worsen), or should the underlying assumptions prove incorrect, actual results could differ materially from those currently forecasted or expected. We disclaim any intention or obligation to update or revise any forward-looking statement whether as a result of changes in information, future events or otherwise.

-3-

‌​

Segments

We currently have three consolidated reportable operating segments at December 31, 2023:

Chemicals Kronos Worldwide, Inc.	Our Chemicals Segment is operated through our majority control of Kronos. Kronos is a leading global producer and marketer of value-added titanium dioxide pigments (TiO2). TiO2 is used to impart whiteness, brightness, opacity and durability to a wide variety of products, including paints, plastics, paper, fibers and ceramics. Additionally, TiO2 is a critical component of everyday applications, such as coatings, plastics and paper, as well as many specialty products such as inks, cosmetics and pharmaceuticals.
Component Products CompX International Inc.	We operate in the component products industry through our majority control of CompX. CompX is a leading manufacturer of security products used in the postal, recreational transportation, office and institutional furniture, cabinetry, tool storage, healthcare and a variety of other industries. CompX is also a leading manufacturer of wake enhancement systems, stainless steel exhaust systems, gauges, throttle controls, trim tabs and related hardware and accessories for the recreational marine industry.
Real Estate Management and Development Basic Management, Inc. and The LandWell Company	We operate in real estate management and development through our majority control of BMI and LandWell. BMI and LandWell own real property in Henderson, Nevada. LandWell is engaged in efforts to develop certain land holdings for commercial, industrial and residential purposes in Henderson, Nevada. BMI previously, through wholly-owned subsidiaries, also was responsible for the delivery of water to the City of Henderson and various other users through September 2022, and provided utility services to certain industrial customers prior to December 2023.

For additional information about our segments and equity investments see “Part II – Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations” and Notes 2, 7 and 12 to our Consolidated Financial Statements.

CHEMICALS SEGMENT – KRONOS WORLDWIDE, INC.

Business Overview

Our majority-controlled subsidiary, Kronos, is a leading global producer and marketer of value-added titanium dioxide pigments, or TiO₂, a base industrial product used in a wide range of applications. Kronos, along with its distributors and agents, sells and provides technical services for its products to approximately 3,000 customers in 100 countries with the majority of sales in Europe, North America and the Asia Pacific region. We believe Kronos has developed considerable expertise and efficiency in the manufacture, sale, shipment and service of its products in domestic and international markets.

TiO₂ is a white inorganic pigment used in a wide range of products for its exceptional durability and its ability to impart whiteness, brightness and opacity. TiO₂ is a critical component of everyday applications, such as coatings, plastics and paper, as well as many specialty products such as inks, cosmetics and pharmaceuticals. TiO₂ is widely considered to be superior to alternative white pigments in large part due to its hiding power (or opacity), which is the ability to cover or

-4-

‌​

mask other materials effectively and efficiently. TiO₂ is designed, marketed and sold based on specific end-use applications.

TiO₂ is the largest commercially used whitening pigment because it has a high refractive rating, giving it more hiding power than any other commercially produced white pigment. In addition, TiO₂ has excellent resistance to interaction with other chemicals, good thermal stability and resistance to ultraviolet degradation. Although there are other white pigments on the market, we believe there are no effective substitutes for TiO₂ because no other white pigment has the physical properties for achieving comparable opacity and brightness or can be incorporated in as cost-effective a manner. Pigment extenders such as kaolin clays, calcium carbonate and polymeric opacifiers are used together with TiO₂ in a number of end-use markets. However, these products are not able to duplicate the opacity performance characteristics of TiO₂ and we believe these products are unlikely to have a significant impact on the use of TiO₂.

TiO₂ is considered a “quality-of-life” product. Demand for TiO₂ has generally been driven by worldwide gross domestic product and has generally increased with rising standards of living in various regions of the world. According to industry estimates, TiO₂ consumption has grown at a compound annual growth rate of approximately 2% since 2000. Per capita consumption of TiO₂ in Western Europe and North America far exceeds that in other areas of the world, and these regions are expected to continue to be the largest consumers of TiO₂ on a per capita basis for the foreseeable future. We believe Western Europe and North America currently account for approximately 14% and 15% of global TiO₂ consumption, respectively. Markets for TiO₂ are generally increasing in China, the Asia Pacific region, South America and Eastern Europe and we believe these are significant markets which will continue to grow as economies in these regions develop and quality-of-life products, including TiO₂, experience greater demand.

Products and end-use markets

Including its predecessors, Kronos has produced and marketed TiO₂ in North America and Europe, its primary markets, for over 100 years. We believe Kronos is the largest chloride process TiO₂ producer in Europe with 44% of its 2023 sales volumes attributable to markets in Europe. The table below shows Kronos’ estimated market share for its significant markets, Europe and North America, for the last three years.

	2021	2022	2023
Europe	15%	14%	12%
North America	17%	17%	16%

We believe Kronos is the leading seller of TiO₂ in several countries, including Germany. Overall, Kronos is one of the top five producers of TiO₂ in the world.

Kronos offers its customers a broad portfolio of products that include over 50 different TiO₂ pigment grades under the KRONOS^® trademark, which provide a variety of performance properties to meet customers’ specific requirements. Kronos’ major customers include domestic and international paint, plastics, decorative laminate and paper manufacturers. Kronos ships TiO₂ to its customers in either a dry or slurry form via rail, truck and/or ocean carrier. Sales of Kronos’ core TiO₂ pigments represented approximately 90% of our Chemicals Segment’s net sales in 2023. Kronos and its agents and distributors primarily sell its products in three major end-use markets: coatings, plastics and paper.

The following tables show Kronos’ approximate TiO₂ sales volume by geographic region and end-use for the year ended December 31, 2023:

Sales volume percentages by geographic region			Sales volume percentages by end-use
Europe	44	%	Coatings	57	%
North America	41	%	Plastics	30	%
Asia Pacific	9	%	Paper	9	%
Rest of World	6	%	Other	4	%

-5-

‌​

Some of the principal applications for Kronos’ products include the following:

TiO₂ for coatings – Kronos’ TiO₂ is used to provide opacity, durability, tinting strength and brightness in industrial coatings, as well as coatings for commercial and residential interiors and exteriors, automobiles, aircraft, machines, appliances, traffic paint and other special purpose coatings. The amount of TiO₂ used in coatings varies widely depending on the opacity, color and quality desired. In general, the higher the opacity requirement of the coating, the greater the TiO₂ content.

TiO₂ for plastics – Kronos produces TiO₂ pigments that improve the optical and physical properties of plastics, including whiteness and opacity. TiO₂ is used to provide opacity to items such as containers and packaging materials, and vinyl products such as windows, door profiles and siding. TiO₂ also generally provides hiding power, neutral undertone, brightness and surface durability for housewares, appliances, toys, computer cases and food packages. TiO₂’s high brightness along with its opacity, is used in some engineering plastics to help mask their undesirable natural color. TiO₂ is also used in masterbatch, which is a concentrate of TiO₂ and other additives and is one of the largest uses for TiO₂ in the plastics end-use market. In masterbatch, the TiO₂ is dispersed at high concentrations into a plastic resin and is then used by manufacturers of plastic containers, bottles, packaging and agricultural films.

TiO₂ for paper – Kronos’ TiO₂ is used in the production of several types of paper, including laminate (decorative) paper, filled paper and coated paper to provide whiteness, brightness, opacity and color stability. Although Kronos sells its TiO₂ to all segments of the paper end-use market, its primary focus is on the TiO₂ grades used in coated board and paper laminates, where several layers of paper are laminated together using melamine resin under high temperature and pressure. The top layer of paper contains TiO₂ and plastic resin and is the layer that is printed with decorative patterns. Paper laminates are used to replace materials such as wood and tile for such applications as counter tops, furniture and wallboard. TiO₂ is beneficial in these applications because it assists in preventing the material from fading or changing color after prolonged exposure to sunlight and other weathering agents.

TiO₂ for other applications – Kronos produces TiO₂ to improve the opacity and hiding power of printing inks. TiO₂ allows inks to achieve very high print quality while not interfering with the technical requirements of printing machinery, including low abrasion, high printing speed and high temperatures. Kronos’ TiO₂ is also used in textile applications where TiO₂ functions as an opacifying and delustering agent. In man-made fibers such as rayon and polyester, TiO₂ corrects an otherwise undesirable glossy and translucent appearance. Without the presence of TiO₂, these materials would be unsuitable for use in many textile applications.

Kronos produces high purity sulfate process anatase TiO₂ used to provide opacity, whiteness and brightness in a variety of cosmetic and personal care products, such as skin cream, lipstick, eye shadow and toothpaste. In pharmaceuticals, Kronos’ TiO₂ is used commonly as a colorant in tablet and capsule coatings as well as in liquid medicines to provide uniformity of color and appearance. KRONOS^® purified anatase grades meet the applicable requirements of the CTFA (Cosmetics, Toiletries and Fragrances Association), USP and BP (United States Pharmacopoeia and British Pharmacopoeia) and the FDA (United States Food and Drug Administration).

Kronos’ TiO₂ business is enhanced by the following three complementary businesses, which comprised approximately 10% of our Chemicals Segment’s net sales in 2023:

● Kronos owns and operates an ilmenite mine in Norway pursuant to a governmental concession with an unlimited term. Ilmenite is a raw material used directly as a feedstock by some sulfate-process TiO₂ plants. Along with supplying ilmenite ore to its sulfate plants in Europe, Kronos also sells ilmenite ore to third parties, some of whom are its competitors. The mine has estimated ilmenite reserves that Kronos expects, based on internal estimates, to last approximately 50 years.

● Kronos manufactures and sells iron-based chemicals, which are co-products and processed co-products of the sulfate and chloride process TiO₂ pigment production. These co-product chemicals are marketed through its Ecochem division and are primarily used as treatment and conditioning agents for industrial effluents and municipal wastewater as well as in the manufacture of iron pigments, cement and agricultural products.

-6-

‌​

● Kronos manufactures and sells other specialty chemicals, which are side-stream products from the production of TiO₂. These specialty chemicals are used in applications in the formulation of pearlescent pigments, production of electroceramic capacitors for cell phones and other electronic devices and natural gas pipe and other specialty applications.

Manufacturing, operations and properties

Kronos produces TiO₂ in two crystalline forms: rutile and anatase. Rutile TiO₂ is manufactured using both a chloride production process and a sulfate production process, whereas anatase TiO₂ is only produced using a sulfate production process. Manufacturers of many end-use applications can use either form, especially during periods of tight supply for TiO₂. The chloride process is the preferred form for use in coatings and plastics, the two largest end-use markets. Due to environmental factors and customer considerations, the proportion of TiO₂ industry sales represented by chloride process pigments has remained stable relative to sulfate process pigments, and in 2023, chloride process production facilities represented approximately 43% of industry capacity. The sulfate process is preferred for use in selected paper products, ceramics, rubber tires, man-made fibers, pharmaceuticals and cosmetics. Once an intermediate TiO₂ pigment has been produced by either the chloride or sulfate process, it is “finished” into products with specific performance characteristics for particular end-use applications through proprietary processes involving various chemical surface treatments and intensive micronizing (milling).

● Chloride process – The chloride process is a continuous process in which chlorine is used to extract rutile TiO₂. The chloride process produces less waste than the sulfate process because much of the chlorine is recycled and feedstock bearing higher titanium content is used. The chloride process also has lower energy requirements and is less labor-intensive than the sulfate process, although the chloride process requires a higher-skilled labor force. The chloride process produces an intermediate base pigment with a wide range of properties. The chloride process produces a product with a blueish undertone and is the preferred form to produce TiO₂ pigments for use in coatings and plastics, the two largest end-use markets.

● Sulfate process – The sulfate process is a batch process in which sulfuric acid is used to extract the TiO₂ from ilmenite or titanium slag. After separation from the impurities in the ore (mainly iron), the TiO₂ is precipitated and calcined to form an intermediate base pigment ready for sale or can be upgraded through finishing treatments. The sulfate process produces a warmer undertone and is preferred for use in selected paper products, ceramics, rubber tires, man-made fibers, food products, pharmaceuticals and cosmetics, some of which generate higher profit margins.

Kronos produced 545,000, 492,000 and 401,000 metric tons of TiO₂ in 2021, 2022 and 2023, respectively. Kronos’ production volumes include its share of the output produced by its TiO₂ manufacturing joint venture discussed below. Kronos’ average production capacity utilization rates were approximately full practical capacity in 2021, 89% in 2022 and 72% in 2023. Beginning in the fourth quarter of 2022 and continuing throughout 2023, Kronos adjusted production levels to correspond with reduced customer demand resulting from challenging economic conditions and geopolitical uncertainties.

Kronos operates facilities throughout North America and Europe, including the only sulfate process plant in North America and four TiO₂ plants in Europe (one in each of Leverkusen, Germany; Nordenham, Germany; Langerbrugge, Belgium; and Fredrikstad, Norway). In North America, Kronos has a TiO₂ plant in Varennes, Quebec, Canada and, through the manufacturing joint venture described below, a 50% interest in a TiO₂ plant near Lake Charles, Louisiana.

Kronos’ chloride process production and remaining sulfate production capacity has increased by approximately 5% over the past ten years due to debottlenecking programs, with only moderate capital expenditures. Kronos operated its facilities at reduced capacities in the fourth quarter of 2022 and through 2023.

-7-

‌​

The following table presents the division of Kronos’ expected 2024 manufacturing capacity by plant location and type of manufacturing process:

		% of capacity by TiO2
		manufacturing process
Facility	Description	Chloride		Sulfate
Leverkusen, Germany (1)	TiO2 production, chloride process, co-products	32	%	–	%
Nordenham, Germany	TiO2 production, sulfate process, co-products	–		11
Langerbrugge, Belgium	TiO2 production, chloride process, co-products,   titanium chemicals products	16		–
Fredrikstad, Norway (2)	TiO2 production, sulfate process, co-products	–		6
Varennes, Canada	TiO2 production, chloride and sulfate process,   slurry facility, titanium chemicals products	18		3
Lake Charles, LA, US (3)	TiO2 production, chloride process	14		–
Total		80	%	20	%

(1) The Leverkusen facility is located within a more extensive manufacturing complex. Kronos owns its Leverkusen facility, which represents about one-third of its current TiO₂ production capacity, but Kronos leases the land under the facility under a long-term agreement which expires in 2050. Lease payments are periodically negotiated for periods of at least two years at a time. A third-party operator of the manufacturing complex provides some raw materials including chlorine, auxiliary and operating materials, utilities and services necessary to operate the Leverkusen facility under separate supplies and services agreements.

(2) The Fredrikstad facility is located on public land and is leased until 2063.

(3) Kronos operates the facility near Lake Charles, Louisiana through a joint venture with Venator Investments LLC (Venator Investments), a wholly-owned subsidiary of Venator Group, of which Venator Materials PLC (Venator) owns 100% and the amount indicated in the table above represents the share of TiO₂ produced by the joint venture to which Kronos is entitled. See Note 7 to our Consolidated Financial Statements and “TiO₂ manufacturing joint venture.” The joint venture owns the land and facility.

Kronos owns the land underlying all of its principal production facilities unless otherwise indicated in the table above.

Kronos also operates an ilmenite mine in Norway pursuant to a governmental concession with an unlimited term. In addition, Kronos operates a rutile slurry manufacturing plant near Lake Charles, Louisiana, which converts dry pigment primarily manufactured for it at the Lake Charles TiO₂ facility into a slurry form that is then shipped to customers.

Kronos has corporate and administrative offices located in the U.S., Germany, Norway, Canada, Belgium and France.

TiO₂ manufacturing joint venture

Kronos Louisiana, Inc., one of Kronos’ subsidiaries, and Venator Investments each own a 50% interest in a manufacturing joint venture, Louisiana Pigment Company, L.P. (LPC). LPC owns and operates a chloride-process TiO₂ plant located near Lake Charles, Louisiana. Kronos and Venator share production from the plant equally pursuant to separate offtake agreements, unless Kronos and Venator otherwise agree.

A supervisory committee directs the business and affairs of the joint venture, including production and output decisions. This committee is composed of four members, two of whom Kronos appoints and two of whom Venator appoints. Two general managers manage the operations of the joint venture acting under the direction of the supervisory committee. Kronos appoints one general manager and Venator appoints the other.

-8-

‌​

We do not consolidate LPC because we do not control it. We account for Kronos’ interest in the joint venture by the equity method. The joint venture operates on a break-even basis and therefore we do not have any equity in earnings of the joint venture. Kronos is required to purchase one half of the TiO₂ produced by the joint venture. All costs and capital expenditures are shared equally with Venator with the exception of feedstock (purchased natural rutile ore or chlorine slag) and packaging costs for the pigment grades produced. Kronos’ share of net costs is reported as cost of sales as the TiO₂ is sold. See Notes 7 and 17 to our Consolidated Financial Statements.

Raw materials

The primary raw materials used in chloride process TiO₂ are titanium-containing feedstock (purchased natural rutile ore or chlorine slag), chlorine and petroleum coke. Chlorine is available from a number of suppliers, while petroleum coke is available from a limited number of suppliers. Titanium-containing feedstock suitable for use in the chloride process is available from a limited but increasing number of suppliers principally in Australia, South Africa, Sierra Leone, Canada and India. Kronos purchases feedstock for its chloride process TiO₂ from the following primary suppliers for certain contractually specified volumes for delivery extending in some cases, through 2026:

Supplier	Product	Renewal Terms
Rio Tinto Iron and Titanium Ltd	Chloride process grade slag	Auto-renews bi-annually
Rio Tinto Iron and Titanium Ltd	Upgraded slag	Auto-renews annually
Eramet SA	Chloride process grade slag	Renewal terms upon negotiation
Sierra Rutile Limited	Rutile ore	Renewal terms upon negotiation
Iluka Resources Limited	Rutile ore	Renewal terms upon negotiation
Saraf Agencies Private Limited	Chloride process grade slag	Renewal terms upon negotiation

In the past Kronos has been, and it expects that it will continue to be, successful in obtaining short-term and long-term extensions to these and other existing supply contracts. Kronos expects the raw materials purchased under these contracts, and contracts it may enter into, will meet its chloride process feedstock requirements over the next several years. Multi-year contracts generally may be terminated with a 12-month written notice or based on certain defaults by either party or failure to agree on pricing as noted in the agreements.

The primary raw materials used in sulfate process TiO₂ are titanium-containing feedstock, primarily ilmenite or purchased sulfate grade slag and sulfuric acid. Sulfuric acid is available from a number of suppliers. Titanium-containing feedstock suitable for use in the sulfate process is available from a limited number of suppliers principally in Norway, Canada, Australia, India and South Africa. As one of the few vertically-integrated producers of sulfate process TiO₂, Kronos operates a rock ilmenite mine in Norway, which provided all of the feedstock for its European sulfate process TiO₂ plants in 2023. Kronos expects ilmenite production from its mine to meet its European sulfate process feedstock requirements for the foreseeable future. For its Canadian sulfate process plant, Kronos purchases sulfate grade slag primarily from Rio Tinto Fer et Titane Inc. under a supply contract that renews annually, subject to termination upon twelve months written notice. Kronos expects the raw materials purchased under this contract, and contracts that it may enter into, to meet its sulfate process feedstock requirements over the next several years.

Many of Kronos’ raw material contracts contain fixed quantities it is required to purchase, or specify a range of quantities within which it is required to purchase. The pricing under these agreements is generally negotiated quarterly or semi-annually.

-9-

‌​

The following table summarizes Kronos’ raw materials purchased or mined in 2023.

	Raw materials
Production process/raw material	procured or mined
	(In thousands
	of metric tons)
Chloride process plants -
Purchased slag or rutile ore	430
Sulfate process plants:
Ilmenite ore mined and used internally	156
Purchased slag	15
Purchased ilmenite ore	8

Sales and marketing

Kronos’ marketing strategy is aimed at developing and maintaining strong relationships with new and existing customers. Because TiO₂ represents a significant input cost for its customers, the purchasing decisions are often made by Kronos’ customers’ senior management. Kronos works to maintain close relationships with the key decision makers through in-depth and frequent contact. Kronos endeavors to extend these commercial and technical relationships to multiple levels within its customers’ organizations using its direct sales force and technical service group to accomplish this objective. Kronos believes this helps build customer loyalty and strengthens its competitive position. Close cooperation and strong customer relationships enable Kronos to stay closely attuned to trends in its customers’ businesses. Where appropriate, Kronos works in conjunction with its customers to solve formulation or application problems by modifying specific product properties or developing new pigment grades. Kronos also focuses its sales and marketing efforts on those geographic and end-use market segments where it believes it can realize higher selling prices. This focus includes continuously reviewing and optimizing its customer and product portfolios.

Kronos also works directly with its customers to monitor the success of its products in their end-use applications, evaluates the need for improvements in its product and process technology and identifies opportunities to develop new product solutions for its customers. Kronos’ marketing staff closely coordinates with its sales force and technical specialists to ensure the needs of its customers are met, and to help develop and commercialize new grades where appropriate.

Kronos sells a majority of its products through its direct sales force operating in Europe and North America. Kronos also utilizes sales agents and distributors who are authorized to sell its products in specific geographic areas. In Europe, Kronos’ sales efforts are conducted primarily through its direct sales force and its sales agents. Kronos’ agents do not sell any TiO₂ products other than KRONOS^® branded products. In North America, its sales are made primarily through its direct sales force and supported by a network of distributors. Kronos has increased its marketing efforts over the last several years in export markets and its sales are now made through its direct sales force, sales agents and distributors. In addition to its direct sales force and sales agents, many of Kronos’ sales agents also act as distributors to service its customers in all regions. Kronos offers customer and technical service to customers who purchase its products through distributors as well as to its larger customers serviced by its direct sales force.

Kronos sells to a diverse customer base with only one customer representing 10% or more of our Chemicals Segment’s net sales in 2023 (Behr Process Corporation – 12%). Kronos’ largest ten customers accounted for approximately 35% of our Chemicals Segment’s net sales in 2023.

Neither our Chemicals Segment’s business as a whole nor any of its principal product groups is seasonal to any significant extent. However, TiO₂ sales are generally higher in the second and third quarters of the year, due in part to the increase in coatings production in the spring to meet demand during the spring and summer painting seasons. Kronos normally builds inventories during the first and fourth quarters of each year in order to maximize its product availability during the higher demand periods normally experienced in the second and third quarters.

-10-

‌​

Competition

The TiO₂ industry is highly competitive. Kronos competes primarily on the basis of price, product quality, technical service and the availability of high performance pigment grades. Since TiO₂ is not traded through a commodity market, its pricing is largely a product of negotiation between suppliers and their respective customers. Price and availability are the most significant competitive factors along with quality and customer service for the majority of Kronos’ product grades. Increasingly, Kronos is focused on providing pigments that are differentiated to meet specific customer requests and specialty grades that are differentiated from its competitors’ products. During 2023, Kronos had an estimated 6% share of worldwide TiO₂ sales volume, and based on sales volume, we believe Kronos is the leading seller of TiO₂ in several countries, including Germany.

Kronos’ principal competitors are The Chemours Company, Tronox Incorporated, LB Group Co. Ltd. and Venator Materials PLC. The top five TiO₂ producers (i.e. Kronos and its four principal competitors) account for approximately 52% of the world’s production capacity.

The following chart shows our estimate of worldwide production capacity in 2023:

Worldwide production capacity - 2023
Chemours	14	%
Tronox	12	%
LB Group Co. Ltd.	12	%
Kronos	7	%
Venator	7	%
Other	48	%

Chemours has approximately one-half of total North American TiO₂ production capacity and is Kronos’ principal North American competitor. LB Group Co. Ltd. previously announced it plans to add an additional 200,000 tons of chloride process capacity which we expect will be added incrementally over the next several years. In addition, several of Kronos’ competitors have recently closed or announced plans to close facilities or otherwise reduce capacity, including Chemours which closed its Taiwan facility with an estimated 160,000 tons of chloride process capacity in 2023 and Venator which announced plans in 2024 to close its Duisburg, Germany facility with an estimated 50,000 tons of sulphate process capacity.

The TiO₂ industry is characterized by high barriers to entry consisting of high capital costs, proprietary technology and significant lead times required to construct new facilities or to expand existing capacity. Therefore, over the past ten years, Kronos and its competitors increased industry capacity through debottlenecking projects; however, this increase only partly compensated for the shut-down of various TiO₂ plants throughout the world. Although overall industry demand is expected to increase in 2024, other than through debottlenecking projects and the LB Group Co. Ltd. expansion mentioned above, Kronos does not expect any significant efforts will be undertaken by it or its principal competitors to further increase capacity and Kronos believes it is unlikely any new TiO₂ plants will be constructed in Europe or North America for the foreseeable future. If actual developments differ from Kronos’ expectations, the TiO₂ industry’s and Kronos’ performance could be unfavorably affected.

Research and development

Kronos employs scientists, chemists, process engineers and technicians who are engaged in research and development, process technology and quality assurance activities in Leverkusen, Germany. These individuals have the responsibility for improving Kronos’ chloride and sulfate production processes, improving product quality and strengthening its competitive position by developing new products and applications. Kronos’ expenditures for these activities were approximately $17 million in 2021, $15 million in 2022 and $18 million in 2023. Kronos expects to spend approximately $14 million on research and development in 2024.

-11-

‌​

Kronos continually seeks to improve the quality of its grades and has been successful at developing new grades for existing and new applications to meet the needs of its customers and increase product life cycles. Since the beginning of 2019, Kronos has added seven new grades for pigments and other applications.

Patents, trademarks, trade secrets and other intellectual property rights

Kronos has a comprehensive intellectual property protection strategy that includes obtaining, maintaining and enforcing its patents, primarily in the United States, Canada and Europe. Kronos also registers, maintains and protects its trademark rights. Kronos maintains the secrecy of its trade secret rights and protects them by means of security protocols and confidentiality agreements. In some instances, Kronos has entered into license agreements with third parties concerning various intellectual property matters. Kronos has also from time to time been involved in disputes over intellectual property.

Patents – Kronos has obtained patents and has numerous patent applications pending that cover certain aspects of its products and the technology used in the manufacture of its products. Kronos’ patent strategy is important to it and its continuing business activities. In addition to maintaining its patent portfolio, Kronos seeks patent protection for its technical developments, principally in the United States, Canada and Europe. U.S. patents are generally in effect from the time that they issue as patents and then extend for 20 years from the date of filing. Kronos’ U.S. patent portfolio includes patents having remaining terms ranging from one year to 18 years.

Trademarks – Kronos’ trademarks, including KRONOS^®, are covered by issued and/or pending registrations, including in Canada and the United States. Kronos protects the trademarks it uses in connection with the products it manufactures and sells and has developed goodwill in connection with its long-term use of its trademarks.

Trade secrets – Kronos conducts research activities in secret and it protects the confidentiality of its trade secrets through reasonable measures, including confidentiality agreements and security procedures, including data security. Kronos relies upon unpatented proprietary knowledge and continuing technological innovation and other trade secrets to develop and maintain its competitive position. Kronos’ proprietary chloride production process is an important part of its technology and its business could be harmed if it fails to maintain confidentiality of its trade secrets used in this technology.

Regulatory and environmental matters

Kronos’ operations and properties are governed by various environmental laws and regulations which are complex, change frequently and have tended to become stricter over time. These environmental laws govern, among other things, the generation, storage, handling, use and transportation of hazardous materials; the emission and discharge of hazardous materials into the ground, air, or water; and the health and safety of Kronos’ employees. Certain of Kronos’ operations are, or have been, engaged in the generation, storage, handling, manufacture or use of substances or compounds that may be considered toxic or hazardous within the meaning of applicable environmental laws and regulations.  As with other companies engaged in similar businesses, certain of Kronos’ past and current operations and products have the potential to cause environmental or other damage. Kronos has implemented and continues to implement various policies and programs in an effort to minimize these risks. Kronos’ policy is to comply with applicable environmental laws and regulations at all its facilities and to strive to improve its environmental performance and overall sustainability. It is possible that future developments, such as stricter requirements in environmental laws and enforcement policies, could adversely affect Kronos’ operations, including production, handling, use, storage, transportation, sale or disposal of hazardous or toxic substances or require Kronos to make capital and other expenditures to comply, and could adversely affect our consolidated financial position and results of operations or liquidity.  During 2021, Kronos was notified by government authorities in Norway that the classification of a dam at its mine facilities was changed to the highest level for Norwegian classification of dam structures.  As a result, Kronos’ mine operations are subject to a higher degree of oversight and regulation than existed prior to this change in classification. In 2023, Kronos completed capital projects for improvements to the dam and related areas necessary to meet the new classification standards.

Kronos has a history of identifying new ways to reduce consumption and waste by converting byproducts to co-products through its KRONOS ecochem® products. Annually Kronos updates and publishes its Safety, Environment, Energy and Quality Policy which is translated into local languages and distributed to all its employees and shared publicly

-12-

‌​

via its website.  Kronos has implemented rigorous procedures for incident reporting and investigation, including root cause analysis of environmental and safety incidents and near misses. Because TiO₂ production requires significant energy input, Kronos is focused on energy efficiency at all production locations. Four of its five production facilities maintain certifications to the ISO 50001:2018 Energy Management standard and all locations have local energy teams in place.  These teams are responsible for maintaining ISO 50001:2018 certifications (where applicable), performing regular reviews of local energy consumption, making recommendations regarding capital projects that reduce energy consumption and associated Greenhouse Gas (GHG) emissions or enhance efficiency. When possible, Kronos looks for opportunities to partner with local government authorities through grant opportunities to reduce energy consumption and associated GHG emissions.  Kronos also actively manages potential water-related risks, including flooding and water shortages. Kronos’ manufacturing facilities are strategically located adjacent to sources of water, which it uses for process operations and for shipping and receiving raw materials and finished products. Water-critical processes are identified and ongoing efforts to minimize water use are incorporated into environmental planning.

Kronos’ U.S. manufacturing operations are governed by federal, state, and local environmental and worker health and safety laws and regulations.  These include the Resource Conservation and Recovery Act, or RCRA, the Occupational Safety and Health Act, the Clean Air Act, the Clean Water Act, the Safe Drinking Water Act, the Toxic Substances Control Act and the Comprehensive Environmental Response, Compensation and Liability Act, as amended by the Superfund Amendments and Reauthorization Act, or CERCLA, as well as the state counterparts of these statutes.  Some of these laws hold current or previous owners or operators of real property liable for the costs of cleaning up contamination, even if these owners or operators did not know of, and were not responsible for, such contamination. These laws also assess liability on any person who arranges for the disposal or treatment of hazardous substances, regardless of whether the affected site is owned or operated by such person. Although Kronos has not incurred and does not currently anticipate any material liabilities in connection with such environmental laws, Kronos may be required to make expenditures for environmental remediation in the future.

While the laws regulating operations of industrial facilities in Europe vary from country to country, a common regulatory framework is provided by the European Union, or the EU. Germany and Belgium are members of the EU and follow its initiatives. Norway is not a member but generally patterns its environmental regulatory actions after those of the EU.

From time to time, Kronos’ facilities may be subject to environmental regulatory enforcement under U.S. and non-U.S. statutes. Typically, Kronos establishes compliance programs to resolve these matters. Occasionally, Kronos may pay penalties. To date, such penalties have not involved amounts having a material adverse effect on our consolidated financial position, results of operations or liquidity. Kronos believes all of its facilities are in substantial compliance with applicable environmental laws.

From time to time, new environmental, health and safety regulations are passed or proposed in the countries in which Kronos operates or sells its products, seeking to regulate its operations or to restrict, limit or classify TiO₂. Kronos believes it is in substantial compliance with laws applicable to the regulation of TiO₂. However, increased regulatory scrutiny could affect consumer perception of TiO₂ or limit the marketability and demand for TiO₂ or products containing TiO₂ and increase Kronos’ regulatory and compliance costs.

On October 1, 2021, EU Regulation No. 1272/2008 classifying dry TiO₂ and mixtures containing dry TiO₂ as a suspected carcinogen via inhalation went into force. Kronos’ dry TiO₂ products do not meet the criteria set forth in the regulation and therefore do not require classification labels. On November 23, 2022 the Court of Justice of the European Union annulled the classification of TiO₂ as a suspected carcinogen in its entirety. That decision is currently under appeal.

Kronos’ capital expenditures related to ongoing environmental compliance, protection and improvement programs, including capital expenditures which are primarily focused on increasing operating efficiency but also result  in  improved  environmental  protection  such  as  lower  emissions  from its manufacturing facilities, were $11.2 million in 2023 and are currently expected to be approximately $28 million in 2024.

-13-

‌​

COMPONENT PRODUCTS SEGMENT – COMPX INTERNATIONAL INC.

Business overview

Through our majority-controlled subsidiary, CompX, we are a leading manufacturer of security products including mechanical and electrical cabinet locks and other locking mechanisms used in postal, recreational transportation, office and institutional furniture, cabinetry, tool storage and healthcare applications. CompX also manufactures wake enhancement systems, stainless steel exhaust systems, gauges, throttle controls, trim tabs and related hardware and accessories for the recreational marine and other industries. CompX continuously seeks to diversify into new markets and identify new applications and features for its products, which it believes provides a greater potential for higher rates of earnings growth as well as diversification of risk.

Manufacturing, operations and products

Security Products. CompX’s security products reporting unit manufactures mechanical and electrical cabinet locks and other locking mechanisms used in a variety of applications including mailboxes, ignition systems, file cabinets, desk drawers, tool storage cabinets, high security medical cabinetry, integrated inventory and access control secured narcotics boxes, electronic circuit panels, storage compartments, gas station security, vending and cash containment machines. CompX’s security products reporting unit has one manufacturing facility in Mauldin, South Carolina and one in Grayslake, Illinois which is shared with its marine components reporting unit. CompX believes it is a North American market leader in the manufacture and sale of cabinet locks and other locking mechanisms. These products include:

● disc tumbler locks which provide moderate security and generally represent the lowest cost lock CompX produces;

● pin tumbler locks which are more costly to produce and are used in applications requiring higher levels of security, including KeSet^® and System 64^® (which each allow the user to change the keying on a single lock 64 times without removing the lock from its enclosure), TuBar^® and Turbine™; and

● CompX’s innovative CompX eLock^® and StealthLock^® electronic locks which provide stand-alone or networked security and audit trail capability for drug storage and other valuables through the use of a proximity card, magnetic stripe, radio frequency or other keypad credential.

A substantial portion of security products’ sales consist of products with specialized adaptations to an individual customer’s specifications, some of which are listed above. CompX also has a standardized product line suitable for many customers, which is offered through a North American distribution network to locksmith and smaller original equipment manufacturer (OEM) distributors via its STOCK LOCKS^® distribution program.

Marine Components. CompX’s marine components reporting unit manufactures and distributes wake enhancement systems, stainless steel exhaust components, gauges, throttle controls, trim tabs and related hardware and accessories primarily for ski/wakeboard boats (tow boats) and performance boats. CompX’s marine components reporting unit has a facility in Neenah, Wisconsin and a facility in Grayslake, Illinois which is shared with its security products reporting unit. CompX’s specialty marine component products are high precision components designed to operate within tight tolerances in the highly demanding marine environment. These products include:

● wake enhancement devices, trim tabs, steering wheels, and billet aluminum accessories;

● original equipment and aftermarket stainless steel exhaust headers, exhaust pipes, mufflers and other exhaust components;

● high performance gauges such as GPS speedometers and tachometers;

● mechanical and electronic controls and throttles;

● dash panels, LED indicators, and wire harnesses; and

● grab handles, pin cleats and other accessories.

-14-

‌​

CompX operated three principal operating facilities at December 31, 2023 as shown below.

	Reporting		Size
Facility Name	Unit	Location	(square feet)
Owned Facilities:
National (1)	SP	Mauldin, SC	198,000
Grayslake(1)	SP/MC	Grayslake, IL	133,000
Custom(1)	MC	Neenah, WI	95,000

(1) ISO-9001 registered facilities

SP- Security Products

MC- Marine Components

Raw materials

CompX’s primary raw materials are:

● Security Products - zinc and brass (for the manufacture of locking mechanisms).

● Marine Components - stainless steel (for the manufacture of exhaust headers and pipes and wake enhancement systems), aluminum (for the manufacture of throttles and trim tabs) and other components.

These raw materials are purchased from several suppliers, are readily available from numerous sources and accounted for approximately 13% of our Component Products Segment’s total cost of sales for 2023. Total material costs, including purchased components, represented approximately 48% of our Component Products Segment’s cost of sales in 2023.

CompX occasionally enters into short-term commodity-related raw material supply arrangements to mitigate the impact of future price increases in commodity-related raw materials, including zinc, brass, aluminum and stainless steel. These arrangements generally provide for stated unit prices based upon specified purchase volumes, which help CompX to stabilize its commodity-related raw material costs to a certain extent. At other times CompX may make spot market buys of larger quantities of raw materials to take advantage of favorable pricing or volume-based discounts. After increasing in 2021 and the first half of 2022, prices for the primary commodity-related raw materials used in the manufacture of locking mechanisms, primarily zinc and brass, generally began to stabilize in the latter half of 2022 and into 2023 and generally began to soften in the latter half of 2023. Prices for aluminum and stainless steel, the primary raw material used for the manufacture of marine components including marine exhaust headers and pipes, wake enhancement systems, throttles and trim tabs experienced significant volatility during 2021 and 2022 but were more stable in 2023. Although raw commodity costs declined during 2023 from elevated levels experienced in 2021 and 2022, in most cases materials CompX purchases also include processing and conversion costs such as alloying, extrusion and rolling, which continue to be elevated due to costs of labor, transportation and energy. Based on current economic conditions, CompX expects the prices for zinc, brass, aluminum, stainless steel and other manufacturing materials in 2024 to be relatively stable. When purchased on the spot market, each of these raw materials may be subject to sudden and unanticipated price increases. When possible, CompX seeks to mitigate the impact of fluctuations in these raw material costs on its margins through improvements in production efficiencies or other operating cost reductions. In the event CompX is unable to offset raw material cost increases with other cost reductions, it may be difficult to recover those cost increases through increased product selling prices or raw material surcharges due to the competitive nature of the markets in which it competes. Consequently, overall operating margins can be negatively affected by commodity-related raw material cost pressures. Commodity market prices are cyclical, reflecting overall economic trends, specific developments in consuming industries and speculative investor activities.

Patents and trademarks

CompX holds a number of patents relating to its component products, certain of which it believes to be important to it and its continuing business activity. Patents generally have a term of 20 years, and CompX’s patents have remaining

-15-

‌​

terms ranging from less than 1 year to 17 years at December 31, 2023. CompX’s major trademarks and brand names in addition to CompX^® include:

Security Products	Security Products	Marine Components
CompX® Security Products™ National Cabinet Lock® Fort Lock® Timberline® Lock Chicago Lock® STOCK LOCKS® KeSet® TuBar® StealthLock® ACE® ACE® II CompX eLock®	Lockview® System 64® SlamCAM® RegulatoR® CompXpress® GEM® Turbine™ NARC iD® NARC® ecoForce® Pearl®	CompX Marine® Custom Marine® Livorsi® Marine Livorsi II® Marine CMI Industrial® Custom Marine® Stainless Exhaust The #1 Choice in Performance Boating® Mega Rim® Race Rim® Vantage View® GEN-X®

Sales, marketing and distribution

A majority of our Component Products Segment’s sales are direct to large OEM customers through its factory-based sales and marketing professionals supported by engineers working in concert with field salespeople and independent manufacturer’s representatives. CompX selects manufacturer’s representatives based on special skills in certain markets or relationships with current or potential customers.

In addition to sales to large OEM customers, a substantial portion of CompX’s security products sales are made through distributors. CompX has a significant North American market share of cabinet lock security product sales as a result of the locksmith distribution channel. CompX supports its locksmith distributor sales with a line of standardized products used by the largest segments of the marketplace. These products are packaged and merchandised for easy availability and handling by distributors and end users.

Our Component Products Segment sells to a diverse customer base with only one customer representing 10% or more of our Component Products Segment’s sales in 2023 (United States Postal Service representing 24% of which 11% related to a pilot project). Our Component Products Segment’s largest ten customers accounted for approximately 52% of its sales in 2023.

Competition

The markets in which CompX participates are highly competitive. CompX competes primarily on the basis of product design, including space utilization and aesthetic factors, product quality and durability, price, on-time delivery, service and technical support. CompX focuses its efforts on the middle and high-end segments of the market, where product design, quality, durability and service are valued by the customer. CompX’s security products reporting unit competes against a number of domestic and foreign manufacturers. CompX’s marine components reporting unit competes with small domestic manufacturers and is minimally affected by foreign competitors.

Regulatory and environmental matters

CompX has a history of incorporating environmental management and compliance in its operations and decision making. CompX operates three low-emission manufacturing facilities and CompX’s production processes requiring waste-water discharge are consolidated at its Mauldin, South Carolina facility. This facility has received a ReWa Compliance Excellence Award multiple years for its exemplary performance from Renewable Water Resources, an organization which sets regulatory and water policies for the Mauldin facility’s geographic region. In addition, CompX operates extensive scrap metal recycling programs to reduce landfill waste.

-16-

‌​

CompX’s operations are subject to federal, state and local laws and regulations relating to the use, storage, handling, generation, transportation, treatment, emission, discharge, disposal, remediation of and exposure to hazardous and non-hazardous substances, materials and wastes. CompX’s operations are also subject to federal, state, and local laws and regulations relating to worker health and safety. CompX believes it is in substantial compliance with all such laws and regulations. To date, the costs of maintaining compliance with such laws and regulations have not significantly impacted CompX’s results. CompX currently does not anticipate any significant costs or expenses relating to such matters; however, it is possible future laws and regulations may require it to incur significant additional expenditures.

REAL ESTATE MANAGEMENT AND DEVELOPMENT SEGMENT – BASIC MANAGEMENT, INC. AND THE LANDWELL COMPANY

Business overview

Our Real Estate Management and Development Segment consists of our majority owned subsidiaries, BMI and LandWell. BMI and LandWell own real property in Henderson, Nevada. LandWell is actively engaged in efforts to develop certain real estate in Henderson, Nevada including approximately 2,100 acres zoned for residential/planned community purposes. BMI also was responsible for the delivery of water to the City of Henderson and various other users through a water distribution system owned and operated by Basic Water Company (BWC), a wholly-owned subsidiary of BMI, prior to BWC’s bankruptcy filing and deconsolidation on September 10, 2022. BMI also provided certain utility services to an industrial park located in Henderson, Nevada prior to the sale of Basic Power Company (BPC), a wholly-owned subsidiary of BMI, on December 1, 2023. See Notes 2 and 3 to our Consolidated Financial Statements and also Item 7 – “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Real Estate Management and Development”.

Operations and services

Over the years, LandWell and BMI have focused on developing and selling the land transferred to LandWell as part of its formation in the early 1950’s as well as additional land holdings acquired by LandWell in the surrounding area subsequent to LandWell’s formation (although BMI and LandWell have not had significant real property acquisitions since 2004). Since LandWell’s formation, LandWell and BMI have had a history of successfully developing and selling retail, light industrial, commercial and residential projects in the Henderson, Nevada area. LandWell is focused primarily on the development of a large tract of land in Henderson zoned for residential/planned community purposes (approximately 2,100 acres). Planning and zoning work on the project began in 2007, but intensive development efforts of the residential/planned community did not begin until 2013 (with LandWell acting as the master developer for all such development efforts). LandWell markets and sells its residential/planned community to established home builders in tracts of land that are pre-zoned for a maximum number of home lots. LandWell supports the builders’ efforts to market and sell specific residential homes within its residential/planned community through joint marketing campaign and community wide education efforts.

In addition, BMI, prior to BWC’s bankruptcy filing and deconsolidation on September 10, 2022, delivered water to the City of Henderson and various other users through a water delivery system owned and operated by BWC, and prior to the sale of BPC on December 1, 2023, provided certain utility services to an industrial park located in Henderson, Nevada. Upon approval of the plan of reorganization by the bankruptcy court, substantially all BWC’s assets were sold in November 2023. Following the sale of the BWC assets and BPC, BMI no longer provides services to the industrial park.

Sales

LandWell began marketing land for sale in the residential/planned community in December 2013 and at December 31, 2023 approximately 20 saleable acres remain. In addition, LandWell has been actively marketing and selling land zoned for commercial and light industrial use and at December 31, 2023 approximately 15 saleable acres remain. Contracts for land sales are negotiated on an individual basis, and sales terms and prices will vary based on such factors as location (including location within a planned community), expected development work and individual buyer needs. Although land may be under contract or land sales may be completed, we do not recognize revenue until we have satisfied the criteria for revenue recognition. In some instances, LandWell will receive cash proceeds at the time the contract closes

-17-

‌​

and record deferred revenue for some or all of the cash amount received, with deferred revenue being recognized in subsequent periods. Substantially all the land in the residential/planned community has been sold; however, we expect the development work to take three to four years to complete.

Our Real Estate Management and Development Segment’s sales consist principally of land sales and to a lesser extent water (through September 2022) and electric delivery fees (prior to December 2023). During 2023 we had sales to five customers that exceeded 10% of our Real Estate Management and Development Segment’s net sales (CCR 270 – 17%, Taylor Morrison – 13%, Beazer Homes – 11%, Richmond American Homes – 11% and Sand Hill Venture – 11%) related to land sales.

Competition

There are multiple new construction residential communities in the greater Las Vegas, Nevada area. LandWell competes with these communities on the basis of location, planned community amenities and features, proximity to major retail and recreational activities, and the perception of quality of life within the new community. We believe LandWell’s residential/planned community is unique within the greater Las Vegas area due to its location and planned amenities which include 490 acres of community and neighborhood parks and open space interconnected with major regional trails and parks. LandWell markets its residential/planned community to builders who target first-time to middle market home buyers to maximize sales.

Regulatory and environmental matters

LandWell and the subcontractors it uses must comply with many federal, state and local laws and regulations, including zoning, density and development requirements, building, environmental, advertising, labor and real estate sales rules and regulations. These regulations and requirements affect substantially all aspects of its land development. Our Real Estate Management and Development Segment’s operations are subject to federal, state and local laws and regulations relating to the use, storage, handling, generation, transportation, treatment, emission, discharge, disposal, remediation of and exposure to hazardous and non-hazardous substances, materials and wastes. We believe our Real Estate Management and Development Segment is in substantial compliance with all such laws and regulations. To date, the costs of maintaining compliance with such laws and regulations have not significantly impacted our results. We currently do not anticipate our Real Estate Management and Development Segment will incur significant costs or expenses relating to such matters; however, it is possible future laws and regulations may require it to incur significant additional expenditures.

ENVIRONMENTAL, SOCIAL AND GOVERNANCE (ESG)

We seek to operate our businesses in line with sound ESG principles that include corporate governance, social responsibility, sustainability and cybersecurity. We believe ESG means conducting operations with high standards of environmental and social responsibility, practicing exemplary ethical standards, focusing on safety as a top priority, respecting human rights and supporting our local communities, and continuously developing our employees. At our facilities, we undertake various environmental sustainability programs, and we promote social responsibility and volunteerism through programs designed to support and give back to the local communities in which we operate. Each of our locations maintains site-specific safety programs and disaster response and business continuity plans. All manufacturing facilities have detailed, site-specific emergency response procedures we believe adequately address regulatory compliance, vulnerability to potential hazards, emergency response and action plans, employee training, alarms and warning systems and crisis communication.

The U.S. government and various non-U.S. governmental agencies of countries in which Kronos operates have adopted or are contemplating regulatory changes relating to certain ESG topics, such as the Corporate Social Responsibility Directive adopted by the European Union on November 28, 2022 (EU CSRD). European jurisdictions in which Kronos operates have not yet adopted local legislation to implement the EU CSRD. Kronos is evaluating and will continue to evaluate the applicability of the EU CSRD as regulatory guidance is issued and as the European countries in which it operates adopt implementing legislation and Kronos will establish a compliance program to address any applicable requirements.  

-18-

‌​

In an effort to align our non-employee directors’ financial interests with those of our stockholders, our board of directors established share ownership guidelines for our non-management directors.

Kronos has taken steps to integrate ESG considerations into operating decisions with other critical business factors. Kronos biennially publishes an ESG Report, which is available on its public website. The primary purpose of its ESG Report is to describe Kronos’ policies and programs in the area of ESG, including certain internal metrics and benchmarks related to various aspects of ESG. Kronos voluntarily developed these internal metrics and benchmarks, which Kronos uses to identify progress and opportunities for improvement. These metrics are not intended to be directly comparable to similar metrics utilized by other companies to track ESG performance, as the standards, methodologies and assumptions used to determine these metrics vary by company and jurisdiction.

HUMAN CAPITAL RESOURCES

Employees

Our operating results depend in part on our ability to successfully manage our human capital resources, including attracting, identifying and retaining key talent. Each of our businesses has a well-trained labor force with a substantial number of long-tenured employees. Our businesses provide competitive compensation and benefits to our employees, some of which are offered under collective bargaining agreements. In addition to salaries, these programs, which vary by segment and by country/region, can include annual bonuses, a defined benefit pension plan, a defined contribution plan with employer matching, a profit sharing plan, healthcare and insurance benefits, health savings and flexible spending accounts, paid time off, family leave, family care resources, employee assistance programs, and tuition assistance.

As of December 31, 2023, our Chemicals Segment employed the following number of people:

Europe	1,779
Canada	369
United States (1)	48
Total	2,196

(1) Excludes employees of our LPC joint venture.

Certain employees at each of Kronos’ production facilities are organized by labor unions. Kronos strives to maintain good relationships with all its employees, including the unions and workers’ councils representing those employees. In Europe, Kronos’ union employees are covered by master collective bargaining agreements for the chemical industry that are generally renewed annually. At December 31, 2023, approximately 78% of Kronos’ worldwide workforce is organized under collective bargaining agreements. Kronos did not experience any work stoppages during 2023, although it is possible that there could be future work stoppages or other labor disruptions that could materially and adversely affect Kronos’ business, results of operations, financial position, or liquidity.

As of December 31, 2023, our Component Products Segment and our Real Estate Management and Development Segment employed 555 people and 21 people, respectively, all in the United States. We believe CompX’s and BMI’s labor relations are good.

Health and safety

Protecting the health and safety of our workforce, our customers, our business partners and the natural environment is one of our core values. We are committed to maintaining a strong safety culture where all workers meet or exceed required industry performance standards, and we continuously seek to improve occupational and process safety performance. We conduct our businesses in ways intended to provide all personnel with a safe and healthy work environment and have established safety and environmental programs and goals to achieve these results. We expect our manufacturing facilities to produce our products safely and in compliance with local regulations, policies, standards and practices intended to protect the environment and our people and have established global policies designed to promote compliance. We require our employees to comply with such requirements. We provide our workers with the tools and

-19-

‌​

training necessary to make the appropriate decisions to prevent accidents and injuries. Each of our operating facilities develops, maintains and implements safety programs encompassing key aspects of their operations. In addition, management reviews and evaluates safety performance throughout the year. We monitor conditions that could lead to a safety incident and keep track of injuries through reporting systems in accordance with laws in the jurisdictions in which we operate. With this data we calculate incident frequency rates to assess the quality of our safety performance. At the global level we also track overall safety performance. Each Kronos operating location is subject to local laws and regulations that dictate what injuries are required to be recorded and reported, which may differ from location to location and result in different methods of injury rate calculation. For internal global tracking, benchmarking and identification of opportunities for improvement, Kronos collects the location specific information and applies a U.S.-based injury rate calculation to arrive at a global total frequency rate, which is expressed as the number of incidents at its operating locations per 200,000 hours. This internal safety metric may not be directly comparable to a recordable incident rate calculated under U.S. law. Kronos’ global total frequency rate aggregating information about employees and contractors was 1.08 in 2021 (0.90 was the frequency rate for employees only), 1.01 in 2022 (0.86 was the frequency rate for employees only) and 0.95 in 2023 (0.74 was the frequency rate for employees only).

CompX uses lost time incidents as a key measure of worker safety. CompX defines lost time incidents as work-related accidents where a worker sustains an injury that results in time away from work. CompX had one lost time incident in 2021, three in 2022 and one in 2023.

Diversity and inclusion

We recognize that everyone deserves respect and equal treatment. As a global company, we embrace diversity and collaboration in our workforce and our business initiatives. We are an equal opportunity employer and we base employment decisions on merit, competence and qualifications, without regard to race, color, national origin, gender, age, religion, disability, sex, sexual orientation or other characteristics protected by applicable law in the jurisdictions in which we operate. We promote a respectful, diverse and inclusive workplace in which all individuals are treated with respect and dignity.

OTHER

NL Industries, Inc. – At December 31, 2023, NL owned approximately 87% of CompX and approximately 31% of Kronos. NL also holds certain marketable securities and other investments.

Tremont LLC – Tremont is primarily a holding company through which we hold our 63% ownership interest in BMI and our 77% ownership interest in LandWell. Our 77% ownership interest in LandWell includes 27% we hold through our ownership of Tremont and 50% held by a subsidiary of BMI. Tremont also owns 100% of Tall Pines Insurance Company, an insurance company that also holds certain marketable securities and other investments. Tremont also owns certain real property in Henderson, Nevada. See Note 17 to our Consolidated Financial Statements.

In addition, we also own real property related to certain of our former business units.

Business Strategy – We routinely compare our liquidity requirements and alternative uses of capital against the estimated future cash flows to be received from our subsidiaries and unconsolidated affiliates, and the estimated sales value of those businesses. As a result, we have in the past, and may in the future, seek to raise additional capital, refinance or restructure indebtedness, repurchase indebtedness in the market or otherwise, modify our dividend policy, consider the sale of an interest in our subsidiaries, business units, marketable securities or other assets, or take a combination of these or other steps, to increase liquidity, reduce indebtedness and fund future activities, which have in the past and may in the future involve related companies. From time to time, we and our related entities consider restructuring ownership interests among our subsidiaries and related companies. We expect to continue this activity in the future.

We and other entities that may be deemed to be controlled by or affiliated with Ms. Simmons and the Family Trust routinely evaluate acquisitions of interests in, or combinations with, companies, including related companies, that provide strategic opportunities and synergies or that we perceive to be undervalued in the marketplace. These companies may or may not be engaged in businesses related to our current businesses. In some instances we actively manage the

-20-

‌​

businesses we acquire with a focus on maximizing return-on-investment through cost reductions, capital expenditures, improved operating efficiencies, selective marketing to address market niches, disposition of marginal operations, use of leverage and redeployment of capital to more productive assets. In other instances, we have disposed of our interest in a company prior to gaining control. We intend to consider such activities in the future and may, in connection with such activities, consider issuing additional equity securities and increasing our indebtedness.

Website and Available Information – Our fiscal year ends December 31. We furnish our stockholders with annual reports containing audited financial statements. In addition, we file annual, quarterly and current reports, proxy and information statements and other information with the SEC. Certain of our consolidated subsidiaries (Kronos, NL and CompX) also file annual, quarterly and current reports, proxy and information statements and other information with the SEC. We also make our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments thereto, available free of charge through our website at www.valhi.net as soon as reasonably practical after they have been filed with the SEC. We also provide to anyone, without charge, copies of such documents upon written request. Requests should be directed to the attention of the Corporate Secretary at our address on the cover page of this Form 10-K.

Additional information, including our Audit Committee Charter, our Code of Business Conduct and Ethics and our Corporate Governance Guidelines, can also be found on our website. Information contained on our website is not part of this Annual Report.

The SEC maintains an Internet website at www.sec.gov that contains reports, proxy and information statements and other information regarding issuers, such as us, that file electronically with the SEC.

ITEM 1A.RISK FACTORS

Listed below are certain risk factors associated with us and our businesses. See also certain risk factors discussed in Item 7 – “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Critical Accounting Policies and Estimates”. In addition to the potential effect of these risk factors, any risk factor which could result in reduced earnings or increased operating losses, or reduced liquidity, could in turn adversely affect our ability to service our liabilities or pay dividends on our common stock or adversely affect the quoted market prices for our securities.

Operational Risk Factors

Demand for, and prices of, certain of our Chemicals Segment’s products are influenced by changing market conditions for its products, which may result in reduced earnings or operating losses.

Our Chemicals Segment’s sales and profitability are largely dependent on the TiO₂ industry. In 2023, approximately 90% of our Chemicals Segment’s sales were attributable to sales of TiO₂. TiO₂ is used in many “quality of life” products for which demand historically has been linked to global, regional, and local gross domestic product and discretionary spending, which can be negatively impacted by regional and world events or economic conditions. Such events are likely to cause a decrease in demand for our products and, as a result, may have an adverse effect on our results of operations and financial condition.

Pricing within the global TiO₂ industry over the long term is cyclical and changes in economic conditions worldwide can significantly impact our Chemicals Segment’s earnings and operating cash flows. Historically, the markets for many of our Chemicals Segment’s products have experienced alternating periods of increasing and decreasing demand. Relative changes in the selling prices for our Chemicals Segment’s products are one of the main factors that affect the level of our Chemicals Segment’s profitability. In periods of increasing demand, our Chemicals Segment’s selling prices and profit margins generally will tend to increase, while in periods of decreasing demand selling prices and profit margins generally tend to decrease. In addition, pricing may affect customer inventory levels as customers may from time to time accelerate purchases of TiO₂ in advance of anticipated price increases or defer purchases of TiO₂ in advance of anticipated price decreases. Our Chemicals Segment’s ability to further increase capacity without additional investment in greenfield

-21-

‌​

or brownfield capacity may be limited and as a result, our Chemicals Segment’s profitability may become even more dependent upon the selling prices of its products.

The TiO₂ industry is concentrated and highly competitive and our Chemical Segment faces price pressures in the markets in which it operates, which may result in reduced earnings or operating losses.

The global market in which our Chemicals Segment operates is concentrated, with the top five TiO₂ producers accounting for approximately 52% of the world’s production capacity and is highly competitive. Competition is based on a number of factors, such as price, product quality and service. Our Chemicals Segment faces significant competition from international and regional competitors, including TiO₂ producers in China, who have significant sulfate production process capacity. Chinese producers have also continued to develop chloride process technology, and the risk of substitution of our Chemicals Segment’s products with products made by Chinese producers could increase if Chinese producers increase the use of chloride process technology and improve the quality of their sulfate and chloride products. Some of our Chemicals Segment’s competitors may be able to drive down prices for our Chemicals Segment’s products if their costs are lower than our Chemicals Segment’s costs, including its competitors with vertically integrated sources of raw materials for the chloride process who may have a competitive advantage during periods of high or rising raw material costs or who operate in regions with less stringent regulatory requirements. In addition, some of our Chemicals Segment’s competitors’ financial, technological and other resources may be greater than its resources and such competitors may be better able to withstand changes in market conditions. Our Chemicals Segment’s competitors may be able to respond more quickly than it can to new or emerging technologies and changes in customer requirements. Further, consolidation of our Chemicals Segment’s competitors or customers may result in reduced demand for its products or make it more difficult for it to compete with its competitors. The occurrence of any of these events could result in reduced earnings or operating losses.

Many of the markets in which our Component Products Segment operates are mature and highly competitive resulting in pricing pressure and the need to continuously reduce costs.

Many of the markets our Component Products Segment serves are highly competitive, with a number of competitors offering similar products. Our Component Products Segment focuses its efforts on the middle and high-end segment of the market where it feels that it can compete due to the importance of product design, quality and durability to the customer. However, our Component Products Segment’s ability to effectively compete is impacted by a number of factors. The occurrence of any of these factors could result in reduced earnings or operating losses.

● Competitors may be able to drive down prices for our Component Products Segment’s products beyond its ability to adjust costs because their costs are lower than our Component Products Segment’s, especially products sourced from Asia.

● Competitors’ financial, technological and other resources may be greater than our Component Products Segment’s resources, which may enable them to more effectively withstand changes in market conditions.

● Competitors may be able to respond more quickly than our Component Products Segment can to new or emerging technologies and changes in customer requirements.

● A reduction of our Component Products Segment’s market share with one or more of its key customers, or a reduction in one or more of its key customers’ market share for their end-use products, may reduce demand for its products.

● New competitors could emerge by modifying their existing production facilities to manufacture products that compete with our Component Products Segment’s products.

● Our Component Products Segment may not be able to sustain a cost structure that enables it to be competitive.

● Customers may no longer value our Component Products Segment’s product design, quality or durability over the lower cost products of its competitors.

-22-

‌​

Our development of innovative features for current products is critical to sustaining and growing our Component Product Segment’s sales.

Historically, our Component Products Segment’s ability to provide value-added custom engineered products that address requirements of technology and space utilization has been a key element of its success. Our Component Products Segment spends a significant amount of time and effort to refine, improve and adapt its existing products for new customers and applications. Since expenditures for these types of activities are not considered research and development expense under accounting principles generally accepted in the United States of America (GAAP), the amount of our Component Products Segment’s research and development expenditures, which is not significant, is not indicative of the overall effort involved in the development of new product features. The introduction of new product features requires the coordination of the design, manufacturing and marketing of the new product features with current and potential customers. The ability to coordinate these activities with current and potential customers may be affected by factors beyond our Component Products Segment’s control. While our Component Products Segment will continue to emphasize the introduction of innovative new product features that target customer-specific opportunities, we do not know if any new product features our Component Products Segment introduces will achieve the same degree of success that it has achieved with its existing products. At times our Component Products Segment works with new and existing customers on specific product innovations. Sometimes it has a cost sharing arrangement for development efforts, although our Component Products Segment may also fully bear the development costs. If a customer were to ultimately reject or abandon custom product innovation efforts, our Component Products Segment may not be able to recover its development costs.

Higher costs or limited availability of our raw materials may reduce our earnings and decrease our liquidity. In addition, many of our raw material contracts contain fixed quantities we are required to purchase.

For our Chemicals Segment, the number of sources for and availability of certain raw materials is specific to the particular geographical region in which our facilities are located. Titanium-containing feedstocks suitable for use in our Chemicals Segment’s TiO₂ facilities are available from a limited number of suppliers around the world. Political and economic instability or increased regulations in the countries from which our Chemicals Segment purchases or mines its raw material supplies could adversely affect raw material availability. If our Chemicals Segment or its worldwide vendors are unable to meet their planned or contractual obligations and our Chemicals Segment is unable to obtain necessary raw materials, it could incur higher costs for raw materials or may be required to reduce production levels. Our Chemicals Segment experienced increases in feedstock costs in 2022 and 2023, for example, which affected its margins. Our Chemicals Segment has also experienced higher operating costs such as energy costs. Future variations in the cost of energy, which primarily reflect market prices for oil and natural gas, and for raw materials may significantly affect its operating results and decrease liquidity as our Chemicals Segment may not always be able to increase its selling prices to offset the impact of any higher costs or reduced production levels.

Our Chemicals Segment has supply contracts that provide for its TiO₂ feedstock requirements. While our Chemicals Segment believes it will be able to renew these contracts, as necessary, we do not know if our Chemicals Segment will be successful in renewing them or in obtaining long-term extensions to them prior to expiration. Our Chemicals Segment’s current agreements require it to purchase certain minimum quantities of feedstock with minimum purchase commitments aggregating approximately $583 million beginning in 2024 and extending through 2026. In addition, our Chemicals Segment has other long-term supply and service contracts that provide for various raw materials and services. These agreements require it to purchase certain minimum quantities or services with minimum purchase commitments aggregating approximately $72 million at December 31, 2023. Our Chemicals Segment’s commitments under these contracts could adversely affect our financial results if it significantly reduces its production and is unable to modify the contractual commitments.

Certain raw materials used in our Component Products Segment’s products are commodities that are subject to significant fluctuations in price in response to world-wide supply and demand as well as speculative investor activity. Zinc and brass are the principal raw materials used in the manufacture of security products. Stainless steel and aluminum are the major raw materials used in the manufacture of marine components. These raw materials are purchased from several suppliers and are generally readily available from numerous sources. Our Component Products Segment occasionally enters into short-term raw material supply arrangements to mitigate the impact of future increases in commodity-related

-23-

‌​

raw material costs and ensure supply. Materials purchased outside of these arrangements are sometimes subject to unanticipated and sudden price increases.

Certain components used in our Component Products Segment’s products are manufactured by foreign suppliers located in China and elsewhere. Global economic and political conditions, including natural disasters, terrorist acts, transportation disruptions, global conflict and public health crises such as pandemics, could prevent our Component Products Segment’s vendors from being able to supply these components. Should our Component Products Segment’s vendors not be able to meet their supply obligations or should it be otherwise unable to obtain necessary raw materials or components, it may incur higher supply costs or may be required to reduce production levels, either of which may decrease our liquidity or negatively impact our financial condition or results of operations as our Component Products Segment may be unable to offset the higher costs with increases in its selling prices or reductions in other operating costs.

Our Real Estate Management and Development Segment has significant development obligations related to a residential/planned community in Henderson, Nevada. Increases in labor or construction costs related to the completion of such development obligations may reduce our earnings and decrease our liquidity.

A substantial portion of the revenues and assets associated with our Real Estate Management and Development Segment relates to certain land under development in Henderson, Nevada, including approximately 2,100 acres zoned for residential/planned community purposes. A substantial majority of the land in the residential/planned community was sold prior to 2023. We generally recognize revenue from these land sales over time using cost-based inputs because we receive substantially all cash payment at the time of sale but significant development obligations still exist. We currently estimate development obligations are approximately $107 million and will take approximately three to four years to complete. Our estimates of our development obligations include certain assumptions about future labor and construction costs. If actual costs were significantly above our estimates, revenue, profits and liquidity in our Real Estate Management and Development Segment may be significantly and negatively affected.

Financial Risk Factors

Our assets consist primarily of investments in our operating subsidiaries, and we are dependent upon distributions from our subsidiaries to service our liabilities.

The majority of our operating cash flows are generated by our operating subsidiaries, and our ability to service liabilities and pay dividends on our common stock depends to a large extent upon the cash dividends or other distributions we receive from our subsidiaries. Our subsidiaries are separate and distinct legal entities and they have no obligation, contingent or otherwise, to pay cash dividends or other distributions to us. In addition, the payment of dividends or other distributions from our subsidiaries could be subject to restrictions under applicable law, monetary transfer restrictions, currency exchange regulations in jurisdictions in which our subsidiaries operate or any other restrictions imposed by current or future agreements to which our subsidiaries may be a party, including debt instruments. Events beyond our control, including changes in general business and economic conditions, could adversely impact the ability of our subsidiaries to pay dividends or make other distributions to us. If our subsidiaries were to become unable to make sufficient cash dividends or other distributions to us, our ability to service our liabilities and to pay dividends on our common stock could be adversely affected.

In addition, a significant portion of our assets consist of ownership interests in our subsidiaries. If we were required to liquidate our subsidiaries’ securities in order to generate funds to satisfy our liabilities, we may be required to sell such securities at a time or times for less than what we believe to be the long-term value of such assets.

Our leverage may impair our financial condition or limit our ability to operate our businesses.

We have a significant amount of debt, primarily related to Kronos’ Senior Secured Notes issued in September 2017 and February 2024, Kronos’ and our loans from Contran Corporation and the LandWell bank note. As of December

-24-

‌​

31, 2023, our total consolidated debt was approximately $547 million. Our level of debt could have important consequences to our stockholders and creditors, including:

● making it more difficult for us to satisfy our obligations with respect to our liabilities;

● increasing our vulnerability to adverse general economic and industry conditions;

● requiring that a portion of our cash flows from operations be used for the payment of interest on our debt, which reduces our ability to use our cash flow to fund working capital, capital expenditures, dividends on our common stock, acquisitions or general corporate requirements;

● limiting the ability of our subsidiaries to pay dividends to us;

● limiting our ability to obtain additional financing to fund future working capital, capital expenditures, acquisitions or general corporate requirements;

● limiting our flexibility in planning for, or reacting to, changes in our businesses and the industries in which we operate; and

● placing us at a competitive disadvantage relative to other less leveraged competitors.

Indebtedness outstanding under our loan from Contran and Kronos’ global revolving credit facility (Global Revolver) accrues interest at variable rates. To the extent market interest rates rise, the cost of our debt could increase, even if the amount borrowed remains the same, adversely affecting financial condition, results of operations and cash flows.

In addition to our indebtedness, we are party to various lease and other agreements (including feedstock purchase contracts and other long-term supply and service contracts as discussed above) pursuant to which, along with our indebtedness, we are committed to pay approximately $632 million in 2024. Our ability to make payments on and refinance our debt and to fund planned capital expenditures depends on our ability to generate cash flow in the future. To some extent, this is subject to general economic, financial, competitive, legislative, regulatory, and other factors that are beyond our control. In addition, our ability to borrow funds under certain of our revolving credit facilities in the future, in some instances, will depend in part on these subsidiaries’ ability to maintain specified financial ratios and satisfy certain financial covenants contained in the applicable credit agreement.

Our businesses may not generate cash flows from operating activities sufficient to enable us to pay our debts when they become due and to fund our other liquidity needs. As a result, we may need to refinance all or a portion of our debt before maturity, as we have done in the past. We may not be able to refinance any of our debt in a timely manner on favorable terms, if at all, in the current credit markets. Any inability to generate sufficient cash flows or to refinance our debt on favorable terms could have a material adverse effect on our financial condition.

Changes in currency exchange rates and interest rates can adversely affect our net sales, profits, and cash flows.

We operate our businesses in several different countries and sell our products worldwide. For example, during 2022 and 2023 approximately 45% and 44%, respectively, of our Chemicals Segment’s sales volumes were sold into European markets. The majority (but not all) of our sales from our Chemicals Segment’s operations outside the United States are denominated in currencies other than the United States dollar, primarily the euro, other major European currencies and the Canadian dollar. Therefore, we are exposed to risks related to the need to convert currencies we receive from the sale of our products into the currencies required to pay for certain of our operating costs and expenses and other liabilities (including indebtedness), all of which could result in future losses depending on fluctuations in currency exchange rates and affect the comparability of our results of operations between periods.

-25-

‌​

Legal, Compliance and Regulatory Risk Factors

We could incur significant costs related to legal and environmental remediation matters.

NL formerly manufactured lead pigments for use in paint. NL and others have been named as defendants in various legal proceedings seeking damages for personal injury, property damage and governmental expenditures allegedly caused by the use of lead-based paints. These lawsuits seek recovery under a variety of theories, including public and private nuisance, negligent product design, negligent failure to warn, strict liability, breach of warranty, conspiracy/concert of action, aiding and abetting, enterprise liability, market share or risk contribution liability, intentional tort, fraud and misrepresentation, violations of state consumer protection statutes, supplier negligence and similar claims. The plaintiffs in these actions generally seek to impose on the defendants responsibility for lead paint abatement and health concerns associated with the use of lead-based paints, including damages for personal injury, contribution and/or indemnification for medical expenses, medical monitoring expenses and costs for educational programs. NL entered into a legal settlement in one public-nuisance lead pigment case and has recognized a material liability related to the settlement. Any additional liability NL might incur in the future for these matters could be material. See also Item 3 - “Legal Proceedings - Lead pigment litigation - NL.”

Certain properties and facilities used in NL’s former operations are the subject of litigation, administrative proceedings or investigations arising under various environmental laws. These proceedings seek cleanup costs, personal injury or property damages and/or damages for injury to natural resources. Some of these proceedings involve claims for substantial amounts. Environmental obligations are difficult to assess and estimate for numerous reasons, and we may incur costs for environmental remediation in the future in excess of amounts currently estimated. Any liability we might incur in the future could be material. See also Item 3 - “Legal Proceedings - Environmental matters and litigation.”

Environmental, health and safety laws and regulations may result in increased regulatory scrutiny which could decrease demand for our products, increase our manufacturing and compliance costs or obligations and result in unanticipated losses which could negatively impact our financial results or limit our ability to operate our Chemicals Segment’s business.

From time to time, new environmental, health and safety regulations are passed or proposed in the countries in which we operate or sell our products, seeking to regulate our operations or to restrict, limit or classify TiO₂, or its use. Increased regulatory scrutiny could affect consumer perception of TiO₂ or limit the marketability and demand for TiO₂ or products containing TiO₂ or increase our manufacturing and regulatory compliance obligations and costs. Increased compliance obligations and costs or restrictions on operations, raw materials and certain TiO₂ applications could negatively impact our future financial results through increased costs of production, or reduced sales which may decrease our liquidity, operating income and results of operations.

If some or all of our intellectual property were to be declared invalid, held to be unenforceable or copied by competitors or some or all of our confidential information become known to competitors, or if our competitors were to develop similar or superior intellectual property or technology, our ability to compete could be adversely impacted.

Protection of our intellectual property rights, including patents, copyrights, trade secrets, confidential information, trademarks and tradenames, is important to our businesses and our competitive positions. We endeavor to protect our intellectual property rights in key jurisdictions in which our products are produced, sold or used and in jurisdictions into which our products are imported. However, we may be unable to obtain protection for our intellectual property in key jurisdictions. Although we own and have applied for numerous patents and trademarks throughout the world, we may have to engage in judicial enforcement in order to protect our patent rights and other proprietary rights. Our patents and other intellectual property rights may be challenged, invalidated, circumvented, rendered unenforceable or otherwise compromised. A failure to protect, defend or enforce our intellectual property could have an adverse effect on our financial condition and results of operations. Similarly, third parties may assert claims against us and our customers and distributors alleging our products infringe upon third-party intellectual property rights. In the event that any such third-party prevails against us on such claims, there could be an adverse effect on our financial condition and results of operations.

-26-

‌​

Although it is the practice of our Chemicals Segment to enter into confidentiality agreements with its employees and third parties to protect its proprietary expertise and other trade secrets, these agreements may not provide sufficient protection for its trade secrets or proprietary know-how, or adequate remedies for breaches of such agreements may not be available in the event of an unauthorized use or disclosure of such trade secrets and know-how. Our Chemicals Segment also may not be able to readily detect breaches of such agreements. The failure of our Chemicals Segment’s confidentiality agreements to protect its proprietary technology, know-how or trade secrets could result in a material loss of its competitive position, which could lead to significantly lower revenues, reduced profit margins or loss of market share.

Our Component Products Segment relies on patent, trademark and trade secret laws in the United States and similar laws in other countries to establish and maintain our intellectual property rights in our technology and designs. Despite these measures, any of our intellectual property rights could be challenged, invalidated, circumvented or misappropriated. Third parties may independently discover our trade secrets and proprietary information, and in such cases our Component Products Segment could not assert any trade secret rights against such parties. Further, we do not know if any of our Component Products Segment’s pending trademark or patent applications will be approved. Costly and time-consuming litigation could be necessary to enforce and determine the scope of our intellectual property rights. In addition, the laws of certain countries do not protect intellectual property rights to the same extent as the laws of the United States. Therefore, in certain jurisdictions, we may be unable to protect our technology and designs adequately against unauthorized third-party use, which could adversely affect our competitive position.

Third parties may claim that we or our customers are infringing upon their intellectual property rights. Even if we believe that such claims are without merit, they can be time-consuming and costly to defend and distract our management’s and technical staff’s attention and resources. Claims of intellectual property infringement also might require us to redesign affected technology, enter into costly settlement or license agreements or pay costly damage awards, or face a temporary or permanent injunction prohibiting us from marketing or selling certain of our technology. If we cannot or do not license the infringed technology on reasonable pricing terms or at all, or substitute similar technology from another source, our business could be adversely impacted.

If we must take legal action to protect, defend or enforce our intellectual property rights, any suits or proceedings could result in significant costs, including attorney’s fees and diversion of resources and management’s attention, and we may not prevail in any such suits or proceedings.

Global climate change laws and regulations could negatively impact our financial results or limit our ability to operate our businesses.

We operate production facilities in several countries and many of our facilities require large amounts of energy, including electricity and natural gas, in order to conduct operations. The U.S. government and various non-U.S. governmental agencies of countries in which we operate have determined the consumption of energy derived from fossil fuels is a major contributor to climate change and have adopted or are contemplating regulatory changes in response to the potential impact of climate change, including laws and regulations requiring enhanced reporting (such as the Corporate Social Responsibility Directive adopted by the European Union on November 28, 2022) as well as legislation regarding carbon emission costs, GHG emissions and renewable energy targets. International treaties or agreements may also result in increasing regulation of GHG emissions, including emissions permits and/or energy taxes or the introduction of carbon emissions trading mechanisms.  To date, the existing GHG laws and regulations in effect in the various countries in which we operate have not had a material adverse effect on our financial results. Until the timing, scope and extent of any new or future regulation become known, we cannot predict the effect on our business, results of operations or financial condition. However, if further GHG laws and regulations were to be enacted in one or more countries, it could negatively impact our future results of operations through increased costs of production, particularly as it relates to our energy requirements or our need to obtain emissions permits. If such increased costs of production were to materialize, we may be unable to pass price increases on to our customers to compensate for increased production costs, which may decrease our liquidity, operating income and results of operations. In addition, any adopted future laws and regulations focused on climate change and/or GHG emissions could negatively impact our ability (or that of our customers and suppliers) to compete with companies situated in areas not subject to such laws and regulations.

-27-

‌​

General Risk Factors

Operating as a global business presents risks associated with global and regional economic, political and regulatory environments.

We have significant international operations which, along with our customers and suppliers, could be substantially affected by a number of risks arising from operating a multi-national business, including trade barriers, tariffs, economic sanctions, exchange controls, global and regional economic downturns, terrorism, armed conflict (such as the current conflicts between Russia and Ukraine and Israel and Hamas), natural disasters, pandemics or other health crises and political conditions. We may encounter difficulties enforcing agreements or other legal rights and the effective tax rate may fluctuate based on the variability of geographic earnings and statutory tax rates. TiO₂ production requires significant energy input, and economic sanctions or supply disruptions resulting from armed conflict could lead to additional volatility in global energy prices and energy supply disruptions. These risks, individually or in the aggregate, could have an adverse effect on our results of operations and financial condition.

Technology failures or cybersecurity breaches could have a material adverse effect on our operations.

Our businesses rely on integrated information technology systems to manage, process and analyze data, including to facilitate the manufacture and distribution of products to and from our facilities, receive, process and ship orders, manage the billing of and collections from customers and manage payments to vendors. Although we have systems and procedures in place to protect our information technology systems, there can be no assurance that such systems and procedures will be sufficiently effective. Therefore, any of our information technology systems may be susceptible to outages, disruptions or destruction from power outages, telecommunications failures, employee error, cybersecurity breaches or attacks and other similar events. This could result in a disruption of our business operations, injury to people, harm to the environment or our assets, and/or the inability to access our information technology systems and could adversely affect our results of operations and financial condition. We have in the past experienced, and we expect to continue to experience, cyber-attacks, including phishing and other attempts to breach or gain unauthorized access to, our systems, and vulnerabilities introduced into our systems by trusted third-party vendors who have experienced cyber-attacks. To date we have not suffered breaches in our systems, either directly or through a trusted third-party vendor, which have led to material losses. Due to the increase in global cybersecurity incidents it has become increasingly difficult to obtain insurance coverage on reasonable pricing terms to mitigate some risks associated with technology failures or cybersecurity breaches, and we are experiencing such difficulties in obtaining insurance coverage.

Physical impacts of climate change could have a material adverse effect on our costs and operations.

Climate change may increase both the frequency and severity of extreme weather conditions and natural disasters, such as hurricanes, thunderstorms, tornadoes, drought and snow or ice storms. Extreme weather conditions may increase our costs or cause damage to our facilities, and any damage resulting from extreme weather may not be fully insured. Climate change has also been associated with rising sea levels and many of our facilities are located near coastal areas or waterways where rising sea levels or flooding could disrupt our operations or adversely impact our facilities. Furthermore, periods of extended inclement weather or associated droughts or flooding may inhibit our facility operations and delay or hinder shipments of our products to customers. Any such events could have a material adverse effect on our costs or results of operations.

ITEM 1B.UNRESOLVED STAFF COMMENTS

None.

ITEM 1C.CYBERSECURITY

We operate through our subsidiaries and receive services through our intercorporate services agreement (ISA) with Contran (see Note 17 to our Consolidated Financial Statements). We recognize the importance of assessing, identifying, and managing material risks associated with cybersecurity threats. These risks include, among other things: operational risks, intellectual property theft, fraud, extortion, harm to employees or customers and violation of data privacy

-28-

‌​

or security laws. Our cybersecurity programs are built on operations and compliance foundations. Operations focus on continuous detection, prevention, measurement, analysis, and response to cybersecurity alerts and incidents and on emerging threats. Compliance establishes oversight of our cybersecurity programs by creating risk-based controls to protect the integrity, confidentiality, accessibility and availability of company data stored, processed or transferred. Our cybersecurity program is integrated within our overall risk management processes.

Kronos and CompX each have their own cybersecurity programs. Our corporate cybersecurity program is led by our chief information officer (CIO) who is responsible for our overall information security strategy, policy, security engineering, operations and cyber threat detection and response. Our corporate information systems are owned and operated by Contran and provided to us through the ISA. Our CIO, who also serves as the Kronos CIO, reports to our and Kronos’ chief executive officers, respectively. CompX’s cybersecurity program is led by the director of information technology (IT). The director of IT reports to CompX’s vice president in charge of coordinating operational activities within CompX’s two operating reporting units. Both our CIO and the CompX director of IT have extensive information technology and program management experience and lead teams that have many years of experience with each organization. Cybersecurity risks at each company are also reviewed and tested annually through third-party assessments and internal and external information technology audits. Our, Kronos’ and CompX’s information technology teams review enterprise risk management level cybersecurity risks annually.

We, Kronos and CompX continually enhance our security structure with the ultimate goal of preventing cybersecurity incidents to the extent feasible, while simultaneously increasing our system resilience in an effort to minimize the business impact should an incident occur. Third parties also play a role in our cybersecurity. We, Kronos and CompX engage third-party services to conduct evaluations of our security controls through penetration testing, red team testing, consulting on best practices and to address new challenges. These evaluations include testing both the design and operational effectiveness of security controls. All employees are required to complete cybersecurity training at least once a year and have access to more frequent cybersecurity training through online training. We also require employees in certain roles to complete additional role-based, specialized cybersecurity trainings.

We, Kronos and CompX each have a Cybersecurity Incident Disclosure and Controls Committee (CIDAC) which is central to the response and evaluation of cybersecurity incidents. Our CIDAC is comprised of our CIO and other senior executives including our chief executive officer, chief financial officer and general counsel. Security events and data incidents are evaluated, ranked by severity and prioritized for response and remediation. The IT teams are responsible for categorizing cybersecurity incidents, with incidents evaluated to be high or critical security risks brought to the CIDAC for review and evaluation. Incidents are evaluated to determine materiality as well as operational and business impact. Our CIDAC, as well as the Kronos and CompX CIDAC, performs simulations and tabletop exercises at a management level to evaluate our readiness and response to cybersecurity incidents. External resources and advisors are incorporated as needed.

Our board of directors oversees management’s processes for identifying and mitigating risks, including cybersecurity risks, to help align our risk exposure with our strategic objectives. Senior leadership, including our chief financial officer and CIO, regularly brief the board of directors on our cybersecurity and information security posture, and our board of directors is apprised of cybersecurity incidents deemed to have a high or critical business impact, even if immaterial to us. The board has delegated some of its primary risk oversight to board committees, including that our audit committee facilitates the board’s process of oversight of our overall risk management approach. Our full board retains oversight of cybersecurity because of its importance to us and visibility with our customers.

In the event of an incident, we intend to follow our detailed incident response playbook, which outlines the steps to be followed from incident detection to mitigation, recovery and notification. This includes notifying functional areas (such as legal and human resources), senior leadership and the board as appropriate.

We, Kronos and CompX face a number of cybersecurity risks. To date, such risks have not materially affected us, including our business strategy, results of operations or financial condition. While we have not experienced any breaches, we have encountered occasional attempts, albeit of minor significance, targeting our data and systems, including instances of malware and computer virus infiltration. Thus far all such incidents have been minor. For more information

-29-

‌​

about the cybersecurity risks we face, see the risk factor entitled “Technology failures or cybersecurity breaches could have a material adverse effect on our operations.” in Item 1A- “Risk Factors”.

ITEM 2.PROPERTIES

We along with our subsidiaries, Kronos, CompX and NL lease office space through Contran for our principal executive offices in Dallas, Texas. Our BMI and LandWell subsidiaries’ principal offices are in an owned building in Henderson, Nevada. A list of principal operating facilities for each of our subsidiaries is described in the applicable business sections of Item 1 – “Business.” We believe our facilities are generally adequate and suitable for their respective uses.

ITEM 3.LEGAL PROCEEDINGS

We are involved in various legal proceedings. In addition to information included below, certain information called for by this Item is included in Note 18 to our Consolidated Financial Statements, which is incorporated herein by reference.

Lead Pigment Litigation – NL

NL’s former operations included the manufacture of lead pigments for use in paint and lead-based paint. NL, other former manufacturers of lead pigments for use in paint and lead-based paint (together, the “former pigment manufacturers”), and the Lead Industries Association (LIA), which discontinued business operations in 2002, have been named as defendants in various legal proceedings seeking damages for personal injury, property damage and governmental expenditures allegedly caused by the use of lead-based paints. Certain of these actions have been filed by or on behalf of states, counties, cities or their public housing authorities and school districts, and certain others have been asserted as class actions. These lawsuits seek recovery under a variety of theories, including public and private nuisance, negligent product design, negligent failure to warn, strict liability, breach of warranty, conspiracy/concert of action, aiding and abetting, enterprise liability, market share or risk contribution liability, intentional tort, fraud and misrepresentation, violations of state consumer protection statutes, supplier negligence and similar claims.

The plaintiffs in these actions generally seek to impose on the defendants responsibility for lead paint abatement and health concerns associated with the use of lead-based paints, including damages for personal injury, contribution and/or indemnification for medical expenses, medical monitoring expenses and costs for educational programs. To the extent the plaintiffs seek compensatory or punitive damages in these actions, such damages are generally unspecified. In some cases, the damages are unspecified pursuant to the requirements of applicable state law. A number of cases are inactive or have been dismissed or withdrawn. Most of the remaining cases are in various pre-trial stages. Some are on appeal following dismissal or summary judgment rulings or a trial verdict in favor of either the defendants or the plaintiffs.

NL believes it has substantial defenses to these actions and NL intends to continue to deny all allegations of wrongdoing and liability and to defend against all actions vigorously. We do not believe it is probable we have incurred any liability with respect to pending lead pigment litigation cases to which NL is a party, and with respect to all such lead pigment litigation cases to which NL is a party, we believe liability to NL that may result, if any, in this regard cannot be reasonably estimated, because:

● NL has never settled any of the market share, intentional tort, fraud, nuisance, supplier negligence, breach of warranty, conspiracy, misrepresentation, aiding and abetting, enterprise liability, or statutory cases (other than the Santa Clara case discussed below),

● no final, non-appealable adverse judgments have ever been entered against NL, and

● NL has never ultimately been found liable with respect to any such litigation matters, including over 100 cases over a thirty-year period for which NL was previously a party and for which NL has been dismissed without any finding of liability.

-30-

‌​

Accordingly, we have not accrued any amounts for any of the pending lead pigment and lead-based paint litigation cases filed by or on behalf of states, counties, cities or their public housing authorities and school districts, or those asserted as class actions. In addition, we have determined that liability to NL which may result, if any, cannot be reasonably estimated at this time because there is no prior history of a loss of this nature on which an estimate could be made and there is no substantive information available upon which an estimate could be based.

In the matter titled County of Santa Clara v. Atlantic Richfield Company, et al. (Superior Court of the State of California, County of Santa Clara, Case No. 1-00-CV-788657) on July 24, 2019, an order approving a global settlement agreement entered into among all of the plaintiffs and the three defendants remaining in the case (the Sherwin Williams Company, ConAgra Grocery Products and NL) was entered by the court and the case was dismissed with prejudice. The global settlement agreement provides that an aggregate $305 million will be paid collectively by the three co-defendants in full satisfaction of all claims resulting in a dismissal of the case with prejudice and the resolution of (i) all pending and future claims by the plaintiffs in the case, and (ii) all potential claims for contribution or indemnity between NL and its co-defendants in respect to the case. In the agreement, NL expressly denies any and all liability and the dismissal of the case with prejudice was entered by the court without a final judgment of liability entered against NL. The settlement agreement fully concludes this matter.

Under the terms of the global settlement agreement, each defendant must pay an aggregate $101.7 million to the plaintiffs as follows: $25.0 million within sixty days of the court’s approval of the settlement and dismissal of the case, and the remaining $76.7 million in six annual installments beginning on the first anniversary of the initial payment ($12.0 million for the first five installments and $16.7 million for the sixth installment). NL’s sixth installment will be made with funds already on deposit at the court, which is included in noncurrent restricted cash on our Consolidated Balance Sheets, that are committed to the settlement, including all accrued interest at the date of payment, with any remaining balance to be paid by NL (and any amounts on deposit in excess of the final payment would be returned to NL). Pursuant to the settlement agreement, NL placed an additional $9.0 million into an escrow account which is included in noncurrent restricted cash on our Consolidated Balance Sheets.

For financial reporting purposes, using a discount rate of 1.9% per annum, we discounted the aggregate $101.7 million settlement to the estimated net present value of $96.3 million. NL made the initial $25.0 million payment in September 2019 and the first, second, third and fourth annual installment payments of $12.0 million each in September 2020, 2021, 2022 and 2023. We recognized an aggregate accretion expense of $1.1 million, $.9 million and $.7 million in 2021, 2022 and 2023, respectively.

In January 2024, NL was served with a third-party complaint in a matter titled Arrioena Beal v. Hattie Mitchell, et al. (Circuit Court of Milwaukee County, Wisconsin, Case No. 21-cv-3276). The plaintiff in this case sued her former landlords and several former manufacturers of lead paint for injuries allegedly attributable to lead paint, but did not sue NL. Several of the former lead paint manufacturer defendants later filed a third-party complaint against NL, seeking contribution for any damages they may ultimately have to pay to the plaintiff. NL believes it has substantial defenses to these claims under Wisconsin law and intends to defend itself vigorously.

New cases may continue to be filed against NL. We do not know if NL will incur liability in the future in respect of any of the pending or possible litigation in view of the inherent uncertainties involved in court and jury rulings. In the future, if new information regarding such matters becomes available to us (such as a final, non-appealable adverse verdict against NL or otherwise ultimately being found liable with respect to such matters), at that time we would consider such information in evaluating any remaining cases then-pending against NL as to whether it might then have become probable NL has incurred liability with respect to these matters, and whether such liability, if any, could have become reasonably estimable. The resolution of any of these cases could result in the recognition of a loss contingency accrual that could have a material adverse impact on our net income for the interim or annual period during which such liability is recognized and a material adverse impact on our consolidated financial condition and liquidity.

Environmental Matters and Litigation

Certain properties and facilities used in our former operations (primarily NL’s former operations), including divested primary and secondary lead smelters and former mining locations, are the subject of civil litigation, administrative

-31-

‌​

proceedings or investigations arising under federal and state environmental laws and common law. Additionally, in connection with past operating practices, we are currently involved as a defendant, potentially responsible party (PRP) or both, pursuant to the Comprehensive Environmental Response, Compensation and Liability Act, as amended by the Superfund Amendments and Reauthorization Act (CERCLA), and similar state laws in various governmental and private actions associated with waste disposal sites, mining locations, and facilities that we or our predecessors and NL or its predecessors, subsidiaries or their predecessors currently or previously owned, operated or used, certain of which are on the United States Environmental Protection Agency’s (EPA) Superfund National Priorities List or similar state lists. These proceedings seek cleanup costs, damages for personal injury or property damage and/or damages for injury to natural resources. Certain of these proceedings involve claims for substantial amounts. Although we may be jointly and severally liable for these costs, in most cases NL is only one of a number of PRPs who may also be jointly and severally liable, and among whom costs may be shared or allocated. In addition, we are occasionally named as a party in a number of personal injury lawsuits filed in various jurisdictions alleging claims related to environmental conditions alleged to have resulted from our operations.

Obligations associated with environmental remediation and related matters are difficult to assess and estimate for numerous reasons including the:

● complexity and differing interpretations of governmental regulations,

● number of PRPs and their ability or willingness to fund such allocation of costs,

● financial capabilities of the PRPs and the allocation of costs among them,

● solvency of other PRPs,

● multiplicity of possible solutions,

● number of years of investigatory, remedial and monitoring activity required,

● uncertainty over the extent, if any, to which our former operations might have contributed to the conditions allegedly giving rise to such personal injury, property damage, natural resource and related claims, and

● number of years between former operations and notice of claims and lack of information and documents about the former operations.

In addition, the imposition of more stringent standards or requirements under environmental laws or regulations, new developments or changes regarding site cleanup costs or the allocation of costs among PRPs, solvency of other PRPs, the results of future testing and analysis undertaken with respect to certain sites or a determination that we are potentially responsible for the release of hazardous substances at other sites, could cause our expenditures to exceed our current estimates. Actual costs could exceed accrued amounts or the upper end of the range for sites for which estimates have been made, and costs may be incurred for sites where no estimates presently can be made. Further, additional environmental and related matters may arise in the future. If we were to incur any future liability, this could have a material adverse effect on our consolidated financial statements, results of operations and liquidity.

We record liabilities related to environmental remediation and related matters (including costs associated with damages for personal injury or property damage and/or damages for injury to natural resources) when estimated future expenditures are probable and reasonably estimable. We adjust such accruals as further information becomes available to us or as circumstances change. Unless the amounts and timing of such estimated future expenditures are fixed and reasonably determinable, we generally do not discount estimated future expenditures to their present value due to the uncertainty of the timing of the payout. We recognize recoveries of costs from other parties, if any, as assets when their receipt is deemed probable. At December 31, 2022 and December 31, 2023 we had not recognized any material receivables for recoveries.

We do not know and cannot estimate the exact time frame over which we will make payments for our accrued environmental and related costs. The timing of payments depends upon a number of factors, including but not limited to the timing of the actual remediation process; which in turn depends on factors outside of our control. At each balance sheet date, we estimate the amount of the accrued environmental and related costs which we expect to pay within the next

-32-

‌​

twelve months, and we classify this estimate as a current liability. We classify the remaining accrued environmental costs as a noncurrent liability.

On a quarterly basis, we evaluate the potential range of our liability for environmental remediation and related costs at sites where we have been named as a PRP or defendant, including sites for which NL’s wholly-owned environmental management subsidiary, NL Environmental Management Services, Inc., (EMS), has contractually assumed NL’s obligations. At December 31, 2023, NL had accrued approximately $91 million related to approximately 33 sites associated with remediation and related matters that NL believes are at the present time and/or in their current phase reasonably estimable. The upper end of the range of reasonably possible costs to NL for remediation and related matters for which NL believes it is possible to estimate costs is approximately $118 million, including the amount currently accrued.

NL believes that it is not reasonably possible to estimate the range of costs for certain sites. At December 31, 2023, there were approximately five sites for which NL is not currently able to reasonably estimate a range of costs. For these sites, generally the investigation is in the early stages, and NL is unable to determine whether or not it actually had any association with the site, the nature of its responsibility, if any, for the contamination at the site, if any, and the extent of contamination at and cost to remediate the site. The timing and availability of information on these sites is dependent on events outside of NL’s control, such as when the party alleging liability provides information to NL. At certain of these previously inactive sites, NL has received general and special notices of liability from the EPA and/or state agencies alleging that NL, sometimes with other PRPs, are liable for past and future costs of remediating environmental contamination allegedly caused by former operations. These notifications may assert that NL, along with any other alleged PRPs, are liable for past and/or future clean-up costs. As further information becomes available to us for any of these sites, which would allow us to estimate a range of costs, we would at that time adjust our accruals. Any such adjustment could result in the recognition of an accrual that would have a material effect on our consolidated financial statements, results of operations and liquidity.

We have also accrued approximately $6 million at December 31, 2023 for other environmental cleanup matters which represents our best estimate of the liability.  

In June 2008, NL received a Directive and Notice to Insurers from the New Jersey Department of Environmental Protection (NJDEP) regarding the Margaret’s Creek site in Old Bridge Township, New Jersey. NJDEP alleged that a waste hauler transported waste from one of its former facilities for disposal at the site in the early 1970s. NJDEP referred the site to the EPA, and in November 2009, the EPA added the site to the National Priorities List under the name “Raritan Bay Slag Site.” In 2012, EPA notified NL of its potential liability at this site. In May 2013, EPA issued its Record of Decision for the site. In June 2013, NL filed a contribution suit under CERCLA and the New Jersey Spill Act titled NL Industries, Inc. v. Old Bridge Township, et al. (United States District Court for the District of New Jersey, Civil Action No. 3:13-cv-03493-MAS-TJB) against the current owner, Old Bridge Township, and several federal and state entities NL alleges designed and operated the site and who have significant potential liability as compared to NL which is alleged to have been a potential source of material placed at the site by others. NL’s suit also names certain former NL customers of the former NL facility alleged to be the source of some of the materials. In January 2014, EPA issued a Unilateral Administrative Order (UAO) to NL for clean-up of the site based on the EPA’s preferred remedy set forth in the Record of Decision. NL has denied liability and will defend vigorously against all claims while continuing to seek contribution from other PRPs.

In August 2009, NL was served with a complaint in Raritan Baykeeper, Inc. d/b/a NY/NJ Baykeeper et al. v. NL Industries, Inc. et al. (United States District Court, District of New Jersey, Case No. 3:09-cv-04117). This is a citizen’s suit filed by two local environmental groups pursuant to the Resource Conservation and Recovery Act and the Clean Water Act against NL, current owners, developers and state and local government entities. The complaint alleges that hazardous substances were and continue to be discharged from its former Sayreville, New Jersey property into the sediments of the adjacent Raritan River. The former Sayreville site is currently being remediated by owner/developer parties under the oversight of the NJDEP. The plaintiffs seek a declaratory judgment, injunctive relief, imposition of civil penalties and an award of costs. In June 2022, NL received a letter from the NJDEP informing NL that remediation of contaminated sites upriver of the former Sayreville site had progressed to the point that it was now appropriate for NL to resume investigating the sediments adjacent to the Sayreville site.  NL has been diligently conducting that investigation in compliance with

-33-

‌​

NJDEP regulations. The lawsuit remains pending. NL continues to deny liability and will defend vigorously against all claims.

In 2011, NL was served in ASARCO LLC v. NL Industries, Inc., et al. (United States District Court, Western District of Missouri, Case No. 4:11-cv-00138-DGK) and ASARCO LLC v. NL Industries, Inc., et al. (United States District Court, Eastern District of Missouri, Case No. 4:11-cv-00864).  Both cases are CERCLA contribution actions brought against several defendants to recover a portion of the amount the plaintiff paid in settlement with the U.S. Government during its Chapter 11 bankruptcy.  The court in each case entered indefinite stays of the litigation in 2013 and 2015, which remain in place.

In July 2012, NL was served in EPEC Polymers, Inc., v. NL Industries, Inc., (United States District Court for the District of New Jersey, Case 3:12-cv-03842-PGS-TJB). The plaintiff, a landowner of property located across the Raritan River from NL’s former Sayreville, New Jersey operation, claims that contaminants from NL’s former Sayreville operation came to be located on its land. The complaint seeks compensatory and punitive damages and alleges, among other things, trespass, private nuisance, negligence, strict liability, and claims under CERCLA and the New Jersey Spill Act. NL has denied liability and will defend vigorously against all of the claims.

In September 2013, EPA issued to NL and 34 other PRPs general notice of potential liability and a demand for payment of past costs and performance of a Remedial Design for the Gowanus Canal Superfund Site in Brooklyn, New York. In March 2014, EPA issued a UAO to NL and approximately 27 other PRPs for performance of the Remedial Design at the site. EPA contends that NL is liable as the alleged successor to the Doehler Die Casting Company, and therefore responsible for any potential contamination at the site resulting from Doehler’s ownership/operation of a warehouse and a die casting plant it owned 90 years ago. In April 2019, EPA issued a second UAO to NL and approximately 27 other PRPs for performance of certain work related to the Remedial Design at the site. NL believes that it has no liability at the site. NL has been in discussions with EPA regarding a de minimis settlement and is otherwise taking actions necessary to respond to the UAO. If these discussions are ultimately unsuccessful, NL will continue to deny liability and will defend vigorously against all of the claims.

In January 2020, NL was sued in Atlantic Richfield, Co. v. NL Industries, Inc., (United States District Court for the District of Colorado, Case 1:20-cv-00234). This is a CERCLA cost recovery action brought by a past owner and operator of certain mining properties located in Rico, Colorado. In 2023, the trial court granted partial summary judgment for NL and the plaintiff appealed that decision to the Court of Appeals for the Tenth Circuit. NL continues to deny liability and will defend vigorously against all claims.

In December 2020, NL and several other defendants were sued in California Department of Toxic Substances v. NL Industries, Inc., (United States District Court for the Central District of California, Case 2:20-cv-11293). This complaint by a California state agency asserts claims under CERCLA, a state environmental statute, and the common law relating to lead contamination allegedly connected to a secondary lead smelter located in Vernon, California. In October 2022, the trial court issued an order finding that NL and the other defendants are not liable under CERCLA for lead contamination in residential neighborhoods surrounding, but at a distance from, the former secondary lead smelter. In August 2023, the trial court issued orders finding that NL and several other defendants are jointly liable for contamination on areas where  operations were previously conducted, but are not liable for contamination outside those former operating areas. Neither the amount of damages owed, nor any party’s allocated share of such damages, has yet been determined.  NL has denied liability and will continue to defend vigorously against all claims.

In December 2023, NL and several other defendants were sued in Sunset Commercial, LLC v. Stauffer Management Co., et al. (United States District Court for the District of Nevada, Case 2:23-cv-02081). The complaint asserts claims under CERCLA as well as claims for private nuisance, negligence, trespass, and strict liability.  The plaintiff asserts that hazardous substances located on its property are attributable to a large industrial facility in the area. The plaintiff alleges NL is liable for once holding a lease on the industrial property and for its past partial ownership of another company. NL intends to deny liability and will defend vigorously against all claims.

-34-

‌​

Other Litigation

NL – NL has been named as a defendant in various lawsuits in several jurisdictions, alleging personal injuries as a result of occupational exposure primarily to products manufactured by our former operations containing asbestos, silica and/or mixed dust. In addition, some plaintiffs allege exposure to asbestos from working in various facilities previously owned and/or operated by NL. There are 108 of these types of cases pending, involving a total of approximately 582 plaintiffs. In addition, the claims of approximately 8,715 plaintiffs have been administratively dismissed or placed on the inactive docket in Ohio state courts. We do not expect these claims will be re-opened unless the plaintiffs meet the courts’ medical criteria for asbestos-related claims. We have not accrued any amounts for this litigation because of the uncertainty of liability and inability to reasonably estimate the liability, if any. To date, NL has not been adjudicated liable in any of these matters. Based on information available to us, including:

● facts concerning historical operations,

● the rate of new claims,

● the number of claims from which NL has been dismissed, and

● its prior experience in the defense of these matters,

We believe the range of reasonably possible outcomes of these matters will be consistent with NL’s historical costs (which are not material). Furthermore, we do not expect any reasonably possible outcome would involve amounts material to our consolidated financial position, results of operations or liquidity. NL has sought and will continue to vigorously seek, dismissal and/or a finding of no liability from each claim. In addition, from time to time, NL has received notices regarding asbestos or silica claims purporting to be brought against former subsidiaries, including notices provided to insurers with which it has entered into settlements extinguishing certain insurance policies. These insurers may seek indemnification from NL.

Other – In addition to the matters described above, we and our affiliates are also involved in various other environmental, contractual, product liability, patent (or intellectual property), employment and other claims and disputes incidental to present and former businesses. In certain cases, we have insurance coverage for these items, although we do not expect additional material insurance coverage for environmental matters. We currently believe that the disposition of all of these various other claims and disputes (including asbestos related claims), individually or in the aggregate, should not have a material adverse effect on our consolidated financial position, results of operations or liquidity beyond the accruals already provided.

Insurance Coverage Claims – NL

NL is involved in certain legal proceedings with a number of its former insurance carriers regarding the nature and extent of the carriers’ obligations to NL under insurance policies with respect to certain lead pigment and asbestos lawsuits. The issue of whether insurance coverage for defense costs or indemnity or both will be found to exist for NL’s lead pigment and asbestos litigation depends upon a variety of factors and we cannot assure you that such insurance coverage will be available.

NL has agreements with certain of its former insurance carriers pursuant to which the carriers reimburse it for a portion of its future lead pigment litigation defense costs, and one such carrier reimburses NL for a portion of its future asbestos litigation defense costs. We are not able to determine how much NL will ultimately recover from these carriers for defense costs incurred by NL because of certain issues that arise regarding which defense costs qualify for reimbursement. While NL continues to seek additional insurance recoveries, we do not know if it will be successful in obtaining reimbursement for either defense costs or indemnity. Accordingly, we recognize insurance recoveries in income only when receipt of the recovery is probable and we are able to reasonably estimate the amount of the recovery.

In January 2014, NL was served with a complaint in Certain Underwriters at Lloyds, London, et al v. NL Industries, Inc. (Supreme Court of the State of New York, County of New York, Index No. 14/650103). The plaintiff, a former insurance carrier of NL, is seeking a declaratory judgment of its obligations to NL under insurance policies issued

-35-

‌​

to NL by the plaintiff with respect to certain lead pigment lawsuits. Other insurers have been added as parties to the case and have also sought a declaratory judgment regarding their obligations under certain insurance policies. NL has filed a counterclaim seeking a declaratory judgment that all of the insurers are obligated to provide NL with certain coverage and seeking damages for breach of contract. In December 2020, the trial court denied the insurers’ motion for summary judgment, finding that the arguments raised by the insurers did not bar NL from coverage under the relevant policies. We intend to defend NL’s rights and prosecute NL’s claims in this action vigorously.

NL has settled insurance coverage claims concerning environmental claims with certain of its principal former insurance carriers. We do not expect further material settlements relating to environmental remediation coverage.

ITEM 4.MINE SAFETY DISCLOSURES

Not applicable.

-36-

‌​

PART II

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Common Stock and Dividends – Our common stock is listed and traded on the New York Stock Exchange (symbol: VHI). As of March 1, 2024, there were approximately 740 holders of record of our common stock.

Performance Graph – Set forth below is a line graph comparing the yearly change in our cumulative total stockholder return on our common stock against the cumulative total return of the S&P 500 Composite Stock Price Index and the S&P 500 Industrial Conglomerates Index for the period from December 31, 2018 through December 31, 2023. The graph shows the value at December 31 of each year assuming an original investment of $100 at December 31, 2018, and assumes the reinvestment of our regular quarterly dividends in shares of our stock.

	December 31,
	2018		2019		2020		2021		2022		2023
Valhi common stock	$	100	$	100	$	71	$	136	$	105	$	74
S&P 500 Index		100		131		156		200		164		207
S&P 500 Industrial Conglomerates		100		125		138		145		133		165

The information contained in the performance graph shall not be deemed “soliciting material” or “filed” with the SEC, or subject to the liabilities of Section 18 of the Securities Exchange Act, as amended, except to the extent we specifically request that the material be treated as soliciting material or specifically incorporate this performance graph by reference into a document filed under the Securities Act or the Securities Exchange Act.

-37-

‌​

Equity Compensation Plan Information – We have an equity compensation plan, which was approved by our stockholders, pursuant to which an aggregate of 100,000 shares of our common stock can be awarded to non-employee members of our board of directors. At December 31, 2023, an aggregate of 84,600 shares were available for future award under this plan. See Note 16 to our Consolidated Financial Statements.

Treasury Stock Purchases – In March 2005 and November 2006, our board of directors authorized the repurchase of shares of our common stock in open market transactions, including block purchases, or in privately negotiated transactions, which may include transactions with our affiliates. The aggregate number of shares authorized for repurchase is 833,333, and we have approximately 334,000 shares available for repurchase at December 31, 2023. We may purchase the stock from time to time as market conditions permit. The stock repurchase program does not include specific price targets or timetables and may be suspended at any time. Depending on market conditions, we could terminate the program prior to completion. We will use our cash on hand to acquire the shares. Repurchased shares will be retired and cancelled or may be added to our treasury stock and used for employee benefit plans, future acquisitions or other corporate purposes. See Note 16 to our Consolidated Financial Statements.

ITEM 6.RESERVED

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

RESULTS OF OPERATIONS

Business Overview

We are primarily a holding company. We operate through our wholly-owned and majority-owned subsidiaries, including NL Industries, Inc., Kronos Worldwide, Inc., CompX International, Inc., Tremont LLC, Basic Management, Inc. (BMI) and the LandWell Company (LandWell).  Kronos (NYSE: KRO), NL (NYSE: NL) and CompX (NYSE American: CIX) each file periodic reports with the SEC.

We have three consolidated reportable operating segments:

● Chemicals – Our Chemicals Segment is operated through our majority control of Kronos. Kronos is a leading global producer and marketer of value-added TiO₂. TiO₂ is used to impart whiteness, brightness, opacity and durability to a wide variety of products, including paints, plastics, paper, fibers and ceramics. Additionally, TiO₂ is a critical component of everyday applications, such as coatings, plastics and paper, as well as many specialty products such as inks, cosmetics and pharmaceuticals.

● Component Products – We operate in the component products industry through our majority control of CompX. CompX is a leading manufacturer of security products used in the postal, recreational transportation,  office and institutional furniture, cabinetry, tool storage, healthcare and a variety of other industries. CompX is also a leading manufacturer of wake enhancements systems, stainless steel exhaust systems, gauges, throttle controls, trim tabs and related hardware and accessories for the recreational marine industry.

● Real Estate Management and Development – We operate in real estate management and development through our majority control of BMI and LandWell. BMI and LandWell own real property in Henderson, Nevada. LandWell is engaged in efforts to develop certain land holdings for commercial, industrial and residential purposes in Henderson, Nevada. BMI previously, through wholly-owned subsidiaries, also was responsible for the delivery of water to the City of Henderson and various other users through September 2022, and provided utility services to certain industrial customers prior to December 2023.

-38-

‌​

Operations Overview

Year Ended December 31, 2023 Compared to Year Ended December 31, 2022 –

We reported a net loss attributable to Valhi stockholders of $12.1 million or $.42 per diluted share in 2023 compared to net income of $90.2 million or $3.16 per diluted share in 2022.

Our net income attributable to Valhi stockholders decreased from 2022 to 2023 primarily due to the net effects of:

● lower operating income from our Chemicals Segment in 2023 compared to 2022 including 2023 charges of $5.8 million related to workforce reductions and $3.8 million related to the write-off of certain costs resulting from a capital project termination;

● aggregate charges of $19.7 million in our Real Estate Management and Development Segment in 2022 related to the impairment of certain fixed assets and the bankruptcy filing of BWC;

● income from tax increment infrastructure reimbursement of $25.2 million in 2023 compared to $15.2 million in 2022;

● a non-cash loss on the termination of our U.K. pension plan of $6.2 million in 2023;

● a loss of $2.6 million related to the sale of BPC in 2023; and

● the recognition of a gain on the sale of land not used in our operations of $1.5 million in 2023.

Our diluted net loss per share in 2023 includes:

● income of $.46 per share related to tax increment infrastructure reimbursements recognized in the third and fourth quarters;

● a loss of $.13 per share due to the termination of our U.K. pension plan recognized in the second quarter;

● a loss of $.10 per share related to workforce reductions by our Chemicals Segment recognized in the fourth quarter;

● a loss of $.06 per share related to the write-off of certain costs resulting from a capital project termination recognized in the fourth quarter;

● a gain of $.05 per share related to a business interruption insurance claim arising from Hurricane Laura in 2020 at our Chemicals Segment recognized in the first, second and third quarters;

● a loss of $.04 per share due to the sale of BPC recognized in the fourth quarter; and

● a gain of $.04 per share related to the sale of land not used in our operations recognized in the second quarter.

Our diluted net income per share in 2022 includes:

● aggregate charges of $.35 per share related to the bankruptcy filing of BWC, including $.29 per share related to the impairment of the water delivery system fixed assets, primarily recognized in the second quarter, and $.04 per share loss on the deconsolidation of BWC and $.02 per share of bad debt expense related to an intercompany receivable with BWC, both recognized in the third quarter;

● income of $.28 per share related to tax increment infrastructure reimbursements recognized in the third and fourth quarters;

● a gain of $.05 per share related to a business interruption insurance claim arising from Hurricane Laura in 2020 at our Chemicals Segment recognized in the third quarter; and

● income of $.02 per share related to an energy utility infrastructure reimbursement recognized in the second quarter.

-39-

‌​

Year Ended December 31, 2022 Compared to Year Ended December 31, 2021 –

We reported net income attributable to Valhi stockholders of $90.2 million or $3.16 per diluted share in 2022 compared to $127.2 million or $4.46 per diluted share in 2021.

Our net income attributable to Valhi stockholders decreased from 2021 to 2022 primarily due to the net effects of:

● lower operating income from our Chemicals Segment in 2022 compared to 2021;

● lower operating income from our Real Estate Management and Development Segment in 2022 compared to 2021 including aggregate charges of $19.7 million in our Real Estate Management and Development Segment in 2022 related to the impairment of certain fixed assets and the bankruptcy filing of BWC in 2022; and

● recognition of a gain on sales of land not used in our operations of $16.0 million in 2021.

Our diluted net income per share in 2022 includes:

● aggregate charges of $.35 per share related to the bankruptcy filing of BWC, including $.29 per share related to the impairment of the water delivery system fixed assets, primarily recognized in the second quarter, and $.04 per share loss on the deconsolidation of BWC and $.02 per share of bad debt expense related to an intercompany receivable with BWC, both recognized in the third quarter;

● income of $.28 per share related to tax increment infrastructure reimbursements recognized in the third and fourth quarters;

● a gain of $.05 per share related to a business interruption insurance claim arising from Hurricane Laura in 2020 at our Chemicals Segment recognized in the third quarter; and

● income of $.02 per share related to an energy utility infrastructure reimbursement recognized in the second quarter.

Our diluted net income per share in 2021 includes:

● a gain of $.43 per share related to sales of land not used in our operations recognized in the second and third quarters; and

● income of $.28 per share related to tax increment infrastructure reimbursements recognized in the first and fourth quarters.

We discuss these amounts more fully below.

Current Forecast for 2024 –

We currently expect consolidated operating income for 2024 to be higher as compared to 2023 primarily due to the net effects of:

● higher operating income from our Chemicals Segment in 2024 primarily due to the positive impacts of improved demand and lower manufacturing costs;

● higher operating income from our Real Estate Management and Development Segment in 2024 due to higher expected infrastructure reimbursements; and

● lower operating income from our Component Products Segment in 2024 as security products and marine sales are expected to decline further in 2024.

Our expectations for our future operating results are based upon a number of factors beyond our control, including worldwide growth of gross domestic product, competition in the marketplace, continued operation of competitors,

-40-

‌​

technological advances, worldwide production capacity and public health crises. If actual developments differ from our expectations, our results of operations could be unfavorably affected.

Segment Operating Results – 2023 Compared to 2022 and 2022 Compared to 2021

Chemicals –

We consider TiO₂ to be a “quality of life” product, with demand affected by gross domestic product, or GDP, and overall economic conditions in our markets located in various regions of the world. Over the long-term, we expect demand for TiO₂ will grow by 2% to 3% per year, consistent with our expectations for the long-term growth in GDP. However, even if our Chemicals Segment and its competitors maintain consistent shares of the worldwide market, demand for TiO₂ in any interim or annual period may not change in the same proportion as the change in GDP, in part due to relative changes in the TiO₂ inventory levels of our Chemicals Segment’s customers. We believe our Chemicals Segments’ customers’ inventory levels are influenced in part by their expectation for future changes in TiO₂ selling prices as well as their expectation for future availability of product. Although certain of our Chemicals Segment’s TiO₂ grades are considered specialty pigments, the majority of its grades and substantially all of its production are considered commodity pigment products with price and availability being the most significant competitive factors along with product quality and customer and technical support services.

The factors having the most impact on our Chemicals Segment’s reported operating results are:

● TiO₂ selling prices,

● TiO₂ sales and production volumes,

● Manufacturing costs, particularly raw materials such as third-party feedstock, maintenance and energy-related expenses, and

● Currency exchange rates (particularly the exchange rate for the U.S. dollar relative to the euro, the Norwegian krone and the Canadian dollar and the euro relative to the Norwegian krone).

Our Chemicals Segment’s key performance indicators are its TiO₂ average selling prices, its TiO₂ sales and production volumes and the cost of titanium-containing feedstock purchased from third parties. TiO₂ selling prices generally follow industry trends and selling prices will increase or decrease generally as a result of competitive market pressures.

-41-

‌​

	Years ended December 31,									% Change
	2021			2022			2023			2021-22		2022-23
	(Dollars in millions)
Net sales	$	1,939.4		$	1,930.2		$	1,666.5		—	%	(14)	%
Cost of sales		1,494.5			1,540.2			1,502.7		3		(2)
Gross margin	$	444.9		$	390.0		$	163.8		(12)		(58)
Operating income (loss)	$	200.8		$	174.6		$	(41.1)		(13)		(124)
Percent of net sales:
Cost of sales		77	%		80	%		90	%