PART II AND III 2 partiiandiiii.htm PART II AND III

OFFERING CIRCULAR

 

THE UNITED STATES SECURITIES AND EXCHANGE COMMISSION ("SEC") DOES NOT PASS UPON THE MERITS OF OR GIVE ITS APPROVAL TO ANY SECURITIES OFFERED OR THE TERMS OF THE OFFERING, NOR DOES IT PASS UPON THE ACCURACY OR COMPLETENESS OF ANY OFFERING CIRCULAR OR OTHER SOLICITATION MATERIALS. THESE SECURITIES ARE OFFERED PURSUANT TO AN EXEMPTION FROM REGISTRATION WITH THE COMMISSION; HOWEVER, THE SEC HAS NOT MADE AN INDEPENDENT DETERMINATION THAT THE SECURITIES OFFERED ARE EXEMPT FROM REGISTRATION.

FORM 1-A

Offering Circular

For

Apis Cor Inc.

 

A Delaware Corporation

 

OFFERING UP TO 35,000,000 COMMON SHARES

MINIMUM INVESTMENT AMOUNT OF $1,000.00

 

 September 29, 2021

SECURITIES OFFERED : Equity in the form of 35,000,000 Common Shares

MAXIMUM OFFERING AMOUNT : $35,000,000.00

MINIMUM OFFERING AMOUNT : $0.00

MINIMUM INVESTMENT : $1,000.00

CONTACT INFORMATION :

Apis Cor Inc.

3060 Venture Lane #101

Melbourne, FL 32934

Phone: (347) 404-1481

 

Apis Cor Inc. (“Apis Cor” or the “Company”) is a Delaware Corporation, originally formed on December 19, 2019. On September 15, 2021 the Company filed an amendment to the Articles of Incorporation creating a class of Preferred Stock and executing a stock split for then outstanding Shares of Common Stock (see Exhibit EX1A-2A “Amended And Restated Certificate of Incorporation”)

The Company is offering (the “Offering”) by means of this offering circular (the “Offering Circular”) Company equity in the form of Common Stock denominated in shares (the “Shares”) on a “best efforts” and ongoing basis to investors (‘Investors”) who meet the Investor Suitability standards as set forth herein. (See “Investor Suitability Standards” below.) The Company will offer Shares through its own website apis-cor.com (“Platform”) through the efforts of its Directors, Officers, and employees of the Company and Rialto Markets, a FINRA registered broker-dealer.

There are no underwriting fees currently associated with this Offering. The Company has agreed to pay Rialto Markets three percent (3%) in commissions for all sales of the Shares. Nonetheless, the Company projects to spend One Hundred Fifty Thousand Dollars ($150,000) in total Offering expenses including legal and accounting expenses, and other miscellaneous expenses, not including state notice filing fees.

The Company intends to use the proceeds of this Offering (the “Proceeds”) (i) to fund the research, development and testing of the Apis Cor technologies; (ii) to conduct work in conjunction with real estate developers and homebuilders to determine final products designs and placement; (iii) to expand manufacturing capabilities through the acquisition or leasing of both manufacturing centers and business personal property in the form of equipment; (iv) to bring the Apis Cor products to market; (v) to expand marketing, manufacturing, administrative, and sales operations.

 

The minimum investment amount per Investor is One Thousand Dollars ($1,000.00) for the Offering (“Minimum Investment Amount”). The Company does not intend to list the Shares for trading on any exchange or other trading market in the near future. The Board reserves the right to list the securities on a trading market in the future.

Sales of the Shares pursuant to the Offering will commence immediately upon qualification of the Offering by the SEC (the “Effective Date”) and will terminate at the discretion of the Board or twelve (12) months following the Effective Date, whichever is earlier. The maximum amount of the Offering shall not exceed Thirty Five Million Dollars ($35,000,000) in any twelve (12) month period (“Maximum Offering Amount”) in accordance with Tier II of Regulation A as set forth under the Securities Act of 1933, as amended.

The Company intends to offer the Shares described herein on a continuous and ongoing basis pursuant to Rule 251(d)(3)(i)(f). Further, the acceptance of Investor subscriptions, may be briefly paused at times to allow the Company to effectively and accurately process and settle subscriptions that have been received. (See “Terms of the Offering” below.) The Company may increase the Maximum Offering Amount at its sole and absolute discretion, subject to qualification by the SEC of a post-qualification amendment.

Prior to this Offering, there has been no public market for the Shares, and none is expected to develop. The Offering price is arbitrary and does not bear any relationship to the value of the assets of the Company. The Company does not currently have plans to list any Shares on any securities market. Investing in the Company through the purchase of Shares involves risks, some of which are set forth below. See the section titled “Risk Factors” to read about the factors an Investor should consider prior to purchasing Shares.

Investors who purchase Shares will become shareholders (“Shareholders”) of the Company subject to the terms of the Amended And Restated Certificate of Incorporation and the Bylaws of Apis Cor (the “Bylaws”) once the Company deposits the Investor’s investment into the Company’s main operating account. (See Exhibits EX1A-2B “Bylaws of Apis Cor Inc.” and Exhibit EX1A-2A “Amended And Restated Certificate of Incorporation”).

There will be no escrow account since there is no Minimum Offering Amount for this Offering.

The Directors and Officers will receive compensation from the Company as employees. (See “Risk Factors”, “Compensation of Directors and Officers” below.) Investing in the Shares is speculative and involves substantial risks, including risk of complete loss. Prospective Investors should purchase these securities only if they can afford a complete loss of their investment. (See “Risk Factors” below starting on Page 4) There are material income tax risks associated with investing in the Company that prospective Investors should consider.

As of the date of this Offering Circular, the Company has engaged KoreConX as transfer agent. The Company will commence sales of the Shares immediately upon qualification of the Offering by the SEC. The Company approximates that sales will commence during Q1 - 2022.

 

   Price to the Public  Commissions**  Proceeds to the Issuer  Proceeds to other Persons
Amount to Be Raised per Interest  $1.00   $0.03   $0.97   $0.00 
Minimum Investment Amount  $1,000.00   $30.00   $970.00   $0.00 
Minimum Offering Amount  $0.00   $0.00   $0.00   $0.00 
Maximum Offering Amount  $35,000,000.00   $1,050,000   $33,950,000   $0.00 

 

*The Offering price to Investors was arbitrarily determined by the Board.

** The Company is not using an underwriter for the sale of Shares. These commissions listed are those for Rilato Markets, a FINRA broker-dealer.

Page 1

 

TABLE OF CONTENTS 

  Page
SUMMARY OF THE OFFERING  3 
RISK FACTORS  4 
DILUTION  10 
PLAN OF DISTRIBUTION AND SELLING SECURITYHOLDERS  10 
USE OF PROCEEDS  11 
DESCRIPTION OF THE BUSINESS  13 
DESCRIPTION OF PROPERTY  20 
MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION  21 
DIRECTORS, OFFICERS, AND SIGNIFICANT EMPLOYEES  22 
COMPENSATION OF DIRECTORS AND EXECUTIVES  24 
SECURITY OWNERSHIP OF MANAGEMENT AND CERTAIN SECURITY HOLDERS  25 
INTEREST OF MANAGEMENT AND CERTAIN OTHER TRANSACTIONS  26 
DESCRIPTION OF THE SECURITIES  27 
AUDITED FINANCIAL STATEMENTS FOR PERIOD ENDED DECEMBER 31, 2020  29 
EXHIBIT INDEX  37 
SIGNATURE PAGE  38 

 

 

Page 2

 

 

SUMMARY OF THE OFFERING

 

The following information is only a brief summary of, and is qualified in its entirety by, the detailed information appearing elsewhere in this Offering Circular. This Offering Circular, together with the exhibits attached including, but not limited to, the Amended And Restated Certificate of Incorporation, a copy of which is attached hereto as Exhibit 1A-2A should be carefully read in its entirety before any investment decision is made. If there is a conflict between the terms contained in this Offering Circular and the Amended And Restated Certificate of Incorporation, the Amended And Restated Certificate of Incorporation shall prevail, and control and no Investor should rely on any reference herein to the Amended And Restated Certificate of Incorporation without consulting the actual underlying document.

 

Apis Cor Inc. (“Apis Cor” or the “Company”) is a Delaware Corporation, originally formed on December 19, 2019. Operations did not begin until January 2020. On September 15, 2021 the Company filed an amendment to the Certificate of Incorporation creating a class of Preferred Stock and executing a stock split for then outstanding Shares of Common Stock (see Exhibit 1A-2A “Amended And Restated Certificate of Incorporation”)

The Company intends to use the Proceeds of the Offering (i) to fund the research, development and testing of the Apis Cor technologies; (ii) to conduct work in conjunction with real estate developers and homebuilders to determine final products designs and placement; (iii) to expand manufacturing capabilities through the acquisition or leasing of both manufacturing centers and business personal property in the form of equipment; (iv) to bring the Apis Cor products to market; (v) to expand marketing, manufacturing, administrative, and sales operations.

 

Collectively, the Company’s products will be referred to as the “Technology” (see “Description of the Business” below). Where appropriate, “Technology” may refer to the Company’s associated services to the physical products.

 

 

COMPANY INFORMATION AND BUSINESS 

Apis Cor Inc. (“Apis Cor” or the “Company”) is a Delaware Corporation, with a principal place of business located at 3060 Venture Lane #101, Melbourne, FL 32934. Through this Offering, the Company is offering equity in the Company in the form of Common Stock shares (“Shares”) on a “best efforts” and ongoing basis to qualified investors who meet the Investor Suitability Standards as set forth herein (See “Investor Suitability Standards” below)
 
The Company has been organized (i) to fund the research, development and testing of the Apis Cor Technologies; (ii) to conduct work in conjunction with real estate developers and homebuilders to determine final products designs and placement; (iii) to expand manufacturing capabilities through the acquisition or leasing of both manufacturing centers and business personal property in the form of equipment; (iv) to bring the Apis Cor products to market; (v) to expand marketing, manufacturing, administrative, and sales operations.

 

MANAGEMENT 

The Company is organized as a corporation, with all authority to direct the operations of the Company vested in a Board of Directors. The day-to-day management and investment decisions of the Company are vested in the Board and the Officers. As of the date for this Offering Circular, there are two (2) Directors and two (2) Officers (the “Directors and “Officers”, respectively).

 

THE OFFERING 

This Offering is the first capital raise by the Company offered to the public. The Company is exclusively selling Company equity in the form of Common Stock Shares through this Offering. The Company will use the Proceeds of this Offering to continue research and development operations and commence other design activities (see “Use of Proceeds” below).

 

SECURITIES BEING OFFERED 

The Shares are being offered at a purchase price of One Dollar ($1.00) per Share. The Minimum Offering Amount for any Investor is One Thousand Dollars ($1,000.00). Therefore, an Investor must purchase at least One Thousand (1000) Shares. Upon purchase of Shares, a Shareholder is granted (1) voting rights; (2) a right to receive dividends or disbursements, if and when the Board declares such dividends or disbursements or upon liquidation of the Company. For a complete summary of the rights granted to Shareholders, see “Description of the Securities” below.
 
No market for the Shares currently exists and none is expected to form with respect to the Shares in the near future.

 

COMPENSATION TO BOARD 

The Board and the Officers of the Company will not be compensated through commissions for the sale of the Shares through this Offering.

 

PRIOR EXPERIENCE OF COMPANY MANAGEMENT 

The Directors/Officers have relevant prior experience in the construction and technology development industries. For more information please see “Directors, Officers, And Significant Employees” below.

 

INVESTOR SUITABILITY STANDARDS 

The Shares will not be sold to any person unless they are a “Qualified Purchaser”. A Qualified Purchaser includes: (1) an “Accredited Investor” as that term is defined in Rule 501(a) of Regulation D promulgated under the Securities Act of 1933 (the “Securities Act”); or (2) all other Investors who meet the investment limitations set forth in Rule 251(d)(2) (C) of Regulation A. Such persons as stated in (2) above must conform with the “Limitations on Investment” as described below.

 

Each person purchasing Shares will be subject to the terms of the Amended And Restated Certificate of Incorporation and Bylaws, copies of which are provided in Exhibit 1A-2A.

 

Each person acquiring Shares may be required to represent that he, she, or it is purchasing the Shares for his, her, or its own account for investment purposes and not with a view to resell or distribute the securities.

 

Each prospective purchaser of Shares may be required to furnish such information or certification as the Company may require to determine whether any person or entity purchasing Shares is an Accredited Investor if such is claimed by the Investor.

LIMITATIONS ON INVESTMENT AMOUNT 

For Qualified Purchasers who are Accredited Investors, there is no limitation as to the amount invested through the purchase of Shares. For non-accredited Investors, the aggregate purchase price paid to the Company for the purchase of the Shares cannot be more than ten (10%) percent or the greater of the purchaser’s: (1) annual income or net worth (excluding the value of the primary residence), if purchaser is a natural person; or (2) revenue or net assets for the purchaser’s most recently completed fiscal year, if purchaser is a non-natural person.
 
Different rules apply to Accredited Investors and non-natural persons. Each Investor should review to review Rule 251(d)(2)(i)(C) of Regulation A before purchasing the Shares.

 

COMMISSIONS FOR SELLING Shares 

The Shares will be offered and sold directly by the Company, the Officers, and Company employees. No commissions for selling the Shares will be paid to the Company, the Officers, or employees.
 
The Company will also sell the Shares through the services of Rialto Markets a broker-dealer member of the Financial Industry Regulatory Authority. Rialto will be entitled to commissions of up to three (3%) percent received for the sale of the Shares, not including the costs of expenses.

 

NO LIQUIDITY 

There is no public market for the Shares, and none is expected to develop in the near future. Additionally, the Shares will be non-transferable, except as may be required by law, and will not be listed for trading on any exchange or automated quotation system. (See “Risk Factors” and “Description of the Securities” below.) The Company will not facilitate or otherwise participate in the secondary transfer of any Shares. Prospective Investors are urged to consult their own legal advisors with respect to secondary trading of the Shares. (See “Risk Factors” below.)

 

COMPANY EXPENSES  Except as otherwise provided herein, the Company shall bear all costs and expenses
associated with the operations of the Company, costs associated with the Offering,
operation of the Company, including, but not limited to, the annual tax preparation of
the Company's tax returns, any state and federal income tax due, accounting fees,
filing fees, independent audit reports, costs associated with insurance, and other such costs.

 

Page 3

 

RISK FACTORS

The Commission requires Apis Cor Inc. (“Apis Cor” or the “Company”) to identify risks that are specific to its business and its financial condition. The Company is still subject to all the same risks that all companies in its business, and all companies in the economy, are exposed to. These include risks relating to economic downturns, political and economic events and technological developments (such as hacking and the ability to prevent hacking). Additionally, early-stage companies are inherently riskier than more developed companies. Potential purchasers should consider general risks as well as specific risks when deciding whether to invest.

 

Risks related to Apis Cor business and product 

 

The Company is an early stage company and have not generated any profits since inception.

 

Since the Company has been exclusively conducting research and development activities regarding the Company’s Technology and has not generated significant revenue as of the date of this Offering Circular, the Company may not be able to succeed as a business without additional financing. The Company has incurred losses from operations and has had negative cash flows from operating activities since its inception. Its current operating plan indicates that Apis Cor will continue to incur losses from operating activities given ongoing expenditures related to the implementation of the Technology. Without sufficient additional funds, the Company’s ability to continue is a going concern for the next twelve months and is dependent upon the Company’s ability to raise the necessary funds from Investors to meet financial obligations.

 

If the Company is unable to raise the capital requirements identified in this Offering Circular, it is unlikely that it will be able to continue as a going concern. 

The Company’s auditors have issued a “going concern” opinion. The Company’s ability to continue as a “going concern” is dependent on many factors, including, among other things, its ability to raise the necessary capital to fund its operations as identified in this Offering, growth in product production, and improved operating margins. If the Company is unable to achieve these goals, its business would be jeopardized and the Company may not be able to continue. If the Company ceased operations, it is likely that all of its investors would lose their investment. 

The Company’s Technology may never be commercially accepted by the market

 

It is possible that the intended market and customers may not generally accept the Company’s Technology due to its novelty. It is possible that the failure to market the Technology is the result of a change in business model due to the Company making a determination that the business model needs to be changed, or some other external factor not in the Company’s control. Even though the Board will make an effort to steer the Company towards success, the Company cannot guarantee that any changes to the business model will be in the best interest of the Company and its Shareholders.

 

Developing new products and technologies entails significant risks and uncertainties, including if the Technology does not meet the Company’s projected performance goals, or if unforeseen development costs are incurred and Apis Cor’s cost estimates are understated.

 

The Company is currently in the research and development stage and has only manufactured prototypes for the Technology. Delays or cost overruns in the development of the Technology and failure of the such to meet anticipated performance estimates may be caused by, among other things, unanticipated technological hurdles, difficulties in manufacturing, changes to design, and regulatory hurdles. Any of these events could materially and adversely affect the performance success of the Technology and the results of operations.

 

The 3D printing Technology could fail to achieve the sales projections expected.

 

The growth projections are based on the assumptions that the Company’s 3D printing Technology can be successfully industrialized, manufactured, sold and supported. The Company assumes that the research, development, and design process will be successful in developing strategic partnerships that will financially support the development of the Technology. It is possible that the Technology will fail to gain market acceptance for any number of reasons. If the new products fail to achieve significant sales and acceptance in the marketplace, this could materially and adversely impact the value of the investment.

  

The loss of one or more of Apis Cor’s key personnel, could harm the Company’s operations.

 

The Company currently depends on the continued services and performance of key members of its management team. The loss of key personnel from disability, death, or attrition could disrupt operations and have an adverse effect on the operational success of the business.

 

Costs may grow more quickly than the Company’s revenues, harming the business and profitability.

 

Delivering the Apis Cor’s products is costly because of the upfront research and development expenses to get a functional, safe, and marketable Structural 3D Printer Technology to market. Furthermore, the technical and specialized nature of the Company’s products may result in a higher demand for more specialized and skilled, and therefore more expensive, employees. The Company expects operational expenses to continue to increase in the future as the Technology expands and there is a need to hire additional employees. Projected expenses and/or the time to market may be greater than anticipated and any capital investments intended to make the business more efficient may not be successful. In addition, the Company may need to increase marketing, sales, and other operating expenses in order to grow and expand its operations and to remain competitive. Increases in costs may adversely affect the Company’s business and profitability.

 

Page 4

 

 

The Company relies on third parties to provide services essential to the success of the business. Unavailability of engineers and technicians to support development efforts could cause disruptions in the business.

 

The Company relies on third parties to provide a variety of essential business functions, including manufacturing, systems integration specialists, marketing, proposal drafting, distribution, and other partners. Quality and timeliness of parts manufacturers is critical to Apis Cor’s ability to build prototypes for development and internal testing.

 

The Company intends to use the manufacturing licensees, systems integrators, OEMs, and distributors for the manufacturing and distribution of the Company’s products. Discussions with some of those industry players are currently in the early stages. It is possible that some of these third parties will fail to perform their services or will perform them in an unacceptable manner. It is possible that the Company will experience delays, defects, errors, or other problems with their work that will materially impact operations and the Company may have little or no recourse to recover damages for these losses. A disruption in these third parties’ operations could materially and adversely affect the business. As a result, any investment could be adversely impacted by the Company’s reliance on third parties and their performance.

 

The Company depends on large industrial partners as customers.

 

The Company may not be able to consummate such strategic partnering agreements with developers and go-to-market partners, which could seriously limit or delay the projected revenue growth and profitability.

 

The Company’s business, including costs and supply chain, is subject to risks associated with sourcing and manufacturing.

In the event of a significant disruption in the supply of the raw materials used in the manufacture of the Company’s products, Apis Cor might not be able to locate alternative suppliers of materials of comparable quality at an acceptable price. 

The Company will face significant market competition, which could adversely affect the Company’s results of operations and financial condition

 

The industry in which the Company operates in general is subject to intense and increasing competition. Some of its competitors may have greater capital resources, facilities, and diversity of product lines, which may enable them to compete more effectively in this market. The Company’s competitors may devote their resources to developing and marketing products that will directly compete with its product lines. Due to this competition, there is no assurance that the Company will not encounter difficulties in obtaining revenues and market share or in the positioning of its products. There are no assurances that competition in its respective industry will not lead to reduced prices for its products. If the Company is unable to successfully compete with existing companies and new entrants to the market this will have a negative impact on its business and financial condition.

 

Page 5

 

 

RISKS RELATED TO GOVERNMENT AND INTELLECTUAL PROPERTY

 

Local regulation and evaluation challenges may delay the start or completion of the development of the Company’s properties, increase expenses or limit project building and other activities. 

The Company’s projects may be subject to government regulations in the jurisdictions in which they operate. A system of model building codes is adopted by local jurisdictions who have the authority to enforce construction regulations. The International Building Code (“IBC”) is the predominant code in the United States. IBC Section 104.11 allows for the integration of new construction products, systems, and technologies not explicitly described in the code itself, permitting manufacturers to demonstrate that these products are compliant with the intent of the code.  There are no provisions for 3D printed construction in the IBC, but acceptance criteria has been developed. This may affect the Company’s ability to sell the Company’s products and may negatively affect Company revenues.

 

Government regulation could negatively impact the business.

Due to the potential wide geographic scope of the Company’s operations, the Company could be subject to regulation by political and regulatory entities throughout the world. The Company may incur increased costs necessary to comply with existing and newly adopted laws and regulations or penalties for any failure to comply. The Company’s sales could be adversely affected, directly or indirectly, by existing or future laws and regulations relating to its products or industry.

 

For example, as building projects will cross many differing municipal and state jurisdictions, the Company could be faced with myriad regulations from these jurisdictions as well as the federal government. The Company will need to comply with all government regulations which the Company expects will relate to items such as local zoning codes, technology support applications, quality control procedures, fabrication procedures, maintenance and safety, fire regulations, environmental impact on construction and usage, and other matters. A failure to know the applicable regulations or to successfully abide by such regulations, could negatively impact the Company with potential fines, stoppages or other remedies.

 

As the Company is introducing a novel concept and innovative plan to the marketplace, the Company is unaware of any specific government regulation that could negatively affect its business. However, because this industry niche is new and because there is a component of risk of loss to persons and property, the Company believes that there may ultimately be regulation affecting its projects on both a state and federal level. It is impossible to predict what such regulation would encompass, but any regulation would most likely be at least include additional reporting requirements, potential project specifications or requirements and possibly even regulation of additional aspects of the industry.

 

Zoning issues may delay the start of the projects.

 

By and large, this risk section concerns parts of a project area where a zoning change or variance may be required. While such could be extremely rare, and any delays short-lived, Company Management thought to mention same here.

 

The blends of Structural 3D Print Materials being extruded by the Structural 3D Robotic Printers, for example, can change as the Company continuously works to improve their formulas, which are often proprietary and adapted to local conditions.

 

Company management raises this issue here, therefore, in the unlikely event that there may be zoning ordinances, or community ordinances that do not cover such existing assets. Company management or the Company’s customers would retain local zoning counsel, to seek any necessary variance.

 

Future success is difficult to predict because the Company operates in an emerging and evolving market, and the industry in which the Company competes is subject to volatile and unpredictable cycles.

 

The 3D printing construction industry in which the Company operates is an emerging and evolving market making it difficult to evaluate its future prospects and which may lead to period-to-period variability in operating results. Products and services are based on unique technology which the Company believes offers significant advantages to customers, but the markets the Company serves are in a relatively early stage of development and it is uncertain how rapidly they will develop. It is also uncertain whether the Technology will achieve high levels of demand and acceptance as these markets grow.

  

To meet rapidly changing demand in the industry the Company serves, it must effectively manage its resources and production capacity. During periods of decreasing demand for its products, the Company must be able to appropriately align its cost structure with prevailing market conditions, and effectively manage its supply chain. If the Company is not able to timely and appropriately adapt to changes in its business environment or to accurately assess where the Company is positioned within a business cycle, its business, financial condition, or results of operations may be materially and adversely affected.

 

Even if the Company receives regulatory approval for its products, the Company will be subject to ongoing obligation and continued regulatory review, which may result in significant additional expenses.

 

The Company believes its products will require ongoing regulatory approval for the future of its products. Even if the Company receives regulatory approval for any of its products, it will be subject to ongoing obligations and continued regulatory review, which may result in significant additional expense.

 

The Company relies on patents and proprietary rights to protect its Technology and enforcing those rights could disrupt its business operation and divert precious resources that could ultimately harm its future prospects. 

The Company relies on a combination of trade secrets, provisional and non-provisional patent applications, confidentiality agreements, and procedures to protect its proprietary technologies. The Company has three granted patents, and it has submitted a number of provisional and non-provisional patent applications to United States Patent and Trademark Office (“USPTO”).

The claims contained in any patent may not provide adequate protection for the Company’s products and Technology. In the absence of patent protection for some of the Company’s inventions, the Company may be vulnerable to competitors who attempt to copy its products or gain access to its trade secrets and know-how. There is a risk that potential competitors who have received patents for their technology will seek to block the approval of any patents or related intellectual property that the Company has applied for. The Company’s dependence on any patents secured by our outsourced manufacturing partners may also come under scrutiny by potential competitors and existing patent holders who may attempt to block the manufacture and distribution of its products for an extended timeframe, limiting its ability to generate revenues. In addition, the laws of foreign countries may not protect its proprietary rights to this technology to the same extent as the laws of the U.S.

 

If a dispute arises concerning its Structural 3D Printer Technology, the Company could become involved in litigation that might involve substantial cost. Litigation could divert substantial management attention away from its operations and into efforts to enforce its patents, protect its trade secrets or know-how or determine the scope of the proprietary rights of others. If a proceeding resulted in adverse findings, the Company could be subject to significant liabilities to third parties. The Company might also be required to seek licenses from third parties to manufacture or sell its products. The Company’s ability to manufacture and sell its products may also be adversely affected by other unforeseen factors relating to any proceeding or its outcome.

The Company holds three active patents on its products, and its business employs proprietary technology knowledge and information may be difficult to protect and/or infringe on the intellectual property rights of third parties.

 

The Company currently relies on patents, trade secrets, proprietary know-how, and technology methods that it seeks to protect, in part, by confidentiality agreements and ongoing patent prosecution. The Company cannot assure you that these agreements will not be breached, that it will have adequate remedies for any breach, or that its trade secrets and proprietary knowledge will not otherwise become known or be independently discovered by others. The Company currently holds three patents from the USPTO. The Company’s success depends, in part, on its ability to keep competitors from copying its products, methods, knowledge and maintain trade secrecy and operate without infringing on the proprietary rights of third parties.

  

The Company cannot assure you that the patents of others will not have an adverse effect on its ability to conduct its business, that any of its trade secrets and applications will be protected, that it will develop additional proprietary technology knowledge or methods that is defensible against theft or will provide us with competitive advantages or will not be challenged by third parties.

 

Page 6

 

 

The Company’s Business Depends on the Protection of Its Patents and Other Intellectual Property, and the Company May Suffer if It Is Unable to Adequately Protect such Intellectual Property

The Company’s success and ability to compete are substantially dependent upon its intellectual property. The Company shall rely on patent laws, trade secret protection and confidentiality or license agreements with its employees, consultants, strategic partners and others to protect its intellectual property rights. However, the steps it takes to protect its intellectual property rights may be inadequate. There are events outside of the Company’s control that pose a threat to the Company’s intellectual property rights as well as to the Company’s products and services. For example, effective intellectual property protection may not be available in every country in which the Company licenses its technology. Also, the efforts the Company will take to protect its proprietary rights may not be sufficient or effective. Also, protecting the Company’s intellectual property rights is costly and time consuming. Any unauthorized use of the Company’s intellectual property could make it more expensive to do business and harm the Company’s operating results. In addition, other parties may independently develop similar or competing technologies designed around any patents that may be issued to the Company.

If the Company is unable to protect its proprietary and technology rights the Company’s operations will be adversely affected.

The Company’s success will depend in part on its ability to protect its proprietary rights and Technologies. The Company’s failure to adequately protect its proprietary rights may adversely affect its operations. Despite its efforts to protect its proprietary rights, unauthorized parties may attempt to copy aspects of its services or to obtain and use trade secrets or other information that it regards as proprietary. Specifically, independent contractors the Company hires to provide technical support may breach confidentiality agreements for proprietary information the obtain during their work performed for us. Based on the nature of its business, the Company may or may not be able to adequately protect its rights through patent, copyright and trademark laws. The Company’s means of protecting its proprietary rights in the United States or abroad may not be adequate, and competitors may independently develop similar technologies. In addition, litigation may be necessary in the future to:

Enforce intellectual property rights;

Protect its trade secrets;

Determine the validity and scope of the rights of others; or

Defend against claims of infringement or invalidity.

 

Any such litigation could result in substantial costs if the Company is held to have willfully infringed or to expend significant resources to develop non-infringing technology and would divert the attention of management from the implementation of its business strategy. Furthermore, the outcome of litigation is inherently difficult to predict and the Company may not prevail in any litigation in which it becomes involved.

 

Page 7

 

 

Manufacturing and bringing products to market involves the potential for product recalls, product liability and other claims against the Company.

 

The Company will likely be subject to international, national, state and potentially local consumer product safety and other laws and regulations concerning consumer products generally and 3D printing construction manufacturers specifically, and more restrictive laws and regulations may be adopted in the future. The 3D printing industry in general has been subject to potential product liability claims and it expects 3D printing construction products carry a high risk of such claims due to the close association with newly developed technology procedures. Any significant defects in its designs, products or failure in its quality control procedures may result in, among other things, delay in time-to-market, loss of sales and market acceptance, product liability claims, and damage to its reputation. The costs the Company may incur in correcting any product or design defects may be substantial. Additionally, errors, defects or other performance problems could result in financial damages to its customers, which could result in litigation. Product liability litigation, even if the Company is to prevail, would be time consuming for management and costly to defend. The Company does not presently maintain product liability insurance, and any product liability insurance it may obtain in the future may not be adequate to cover such claims.

 

The Company Currently Has Limited Marketing And Limited Sales Organization In Place

 

The Company currently has limited marketing and limited sales organization for its products and services. If it is unable to establish sufficient marketing and sales capabilities or enter into agreements with third parties to market and sell its products and services, the Company may not be able to effectively market and sell its product and services, or generate product revenues.

 

The Company’s planned products may never achieve market acceptance, which would adversely affect its business.

 

The Company cannot predict whether its product will ever achieve market acceptance. Due to its currently undercapitalized condition, the Company has not yet engaged experts to advise it on the requirements and expense necessary for such product marketing, and it plans to use Proceeds from this Offering to do so. It is possible that the Company will fail to achieve consumer and customer acceptance of its product, in which case Investors in this Offering would likely lose their entire investment. A number of factors may limit the market acceptance of its product, including:

 

Consumer acceptance of product;

Full market launch relative to competitive products;

Availability of alternative or competitive products;

The cost of its product relative to any alternative or competitive products; and/or

The extent and success of the marketing efforts by its competitors.

 

 

Page 8

 

 

Risks related to the Offering

 

The Company is controlled by its Board of Directors, and Common Stock Shareholders have voting rights and distribution rights secondary to Preferred Stock Shareholders.

 

Control of the Company and all of its operations is the responsibility of its Board of Directors and will remain with them. Investors must rely upon the judgment and skills of the Board. The Board of Directors is expressly authorized to make, repeal, alter, amend and rescind any or all of the Bylaws of the Company and may designate one or more committees. The committees generated by the Board of Directors have the right to exercise all the powers and authority of the Board of Directors in the management of the business and affairs of the Company. Holders of the Common Stock are entitled to one vote for each share of Common Stock held at all meetings of shareholders (and written actions in lieu of meetings). The voting, dividend and liquidation rights of the holders of the Common Stock are subject to and qualified by the rights, powers and preferences of the holders of the Preferred Stock.

  

There is no current market for the Shares.

 

There is no formal marketplace for the resale of Company Shares and none is expected to arise for the foreseeable future. Investors should assume that they may not be able to liquidate their investment.

 

The Company may raise additional capital through equity offerings. Therefore, any ownership interest in Apis Cor may be diluted in the future if the Company does not raise enough funds in this fund-raising effort, Apis Cor will conduct another Reg A+ offering, and/or seek angel investors, Venture Capital funds or funds from an equity partner.

 

The Company might not sell enough securities through this Offering to meet its operational needs. Even if the Proceeds received equal the Maximum Offering Amount, the Company may need to raise more funds in the future through additional Offerings. Apis Cor may offer additional Shares and/or other classes of equity or debt, or other forms of securities. If equity, or a security convertible into equity, is offered in these future offerings, then Shareholders’ ownership percentages in the Company may be diluted.

 

Management may revise the Use of Proceeds

 

It is possible that the use of the Proceeds will be revised by management or that adequate funds will not be raised by the Company. Management will have significant flexibility in applying the net Proceeds of this Offering within the scope of the business of the Company. The failure of management to apply such funds effectively could have a material adverse effect on the Company’s business, prospects, financial condition, and results of operations.

 

The Company may require additional funds

 

The Company currently anticipates that the net Proceeds of this Offering will be sufficient to meet its anticipated needs for capital expansion. However, the Company may need to raise additional funds in order to fund more rapid expansion, to respond to capital needs, or to acquire complementary products or materials, particularly if less than the maximum Offering is borrowed by the Company. There can be no assurance that additional financing will be available on terms favorable to the Company, or at all. If adequate funds are not available or are not available on acceptable terms, the Company’s ability to fund its Technology development, take advantage of the project expansion opportunities, or respond to capital needs would be significantly limited. Such limitation may have a material adverse effect on the Company’s business, operating results, and financial condition.

 

Risks Related to the Company’s Organization and Structure

 

Shareholders may vote on the management but have limited ability to influence decisions regarding the business.

 

Apis Cor’s Bylaws provide that the assets, affairs and business of the Company will be managed under the direction of the Board of Directors. The Shareholders do vote on the management but have only limited voting rights on matters affecting the Company’s business, and therefore limited ability to influence decisions regarding the business.

 

The Offering price of the Company’s Shares was not established on an independent basis; the actual value of an investment may be substantially less than what the Investor pays.

 

The Company established the Offering price of the Company’s Shares on an arbitrary basis. The selling price of the Shares bears no relationship to the book or asset values or to any other established criteria for valuing Shares. The Offering price of the Shares of common stock was determined by the Company using best estimates and is based on its own assessment of its financial condition, prospects, and the general condition of the securities market. Further, the Offering price may be significantly more than the price at which the Shares would trade if they were to be listed on an exchange or actively traded by broker-dealers or underwriters.

  

Investor interest in the Company will be diluted if Apis Cor issues additional shares, which could reduce the overall value of an investment.

 

Potential investors in this Offering do not have preemptive rights to any shares the Company issues in the future. Under Apis Cor’s Amended And Restated Certificate of Incorporation, the Company has authority to issue a total of 400,000,000 Shares of Common Stock, although, under Regulation A, the Company is only allowed to sell up to 35 million of the Company’s shares in a 12-month period. After an Investor’s purchase in this Offering, the Board of Directors may elect to (i) sell additional Shares in this or future public offerings, (ii) issue equity interests in private offerings, or (iii) issue Shares to the Board of Directors, or its successors or assigns, in payment of an outstanding fee obligation. To the extent Apis Cor issues additional equity interests after your purchase in this Offering, an Investor’s percentage ownership interest in the Company will be diluted. In addition, depending upon the terms and pricing of any additional offerings and the value of the Company’s investments, an Investor may also experience dilution in the book value and fair value of your Shares.

 

Risks Related to Employee Benefit Plans and Individual Retirement Accounts

 

In some cases, if an Investor fails to meet the fiduciary and other standards under the Employee Retirement Income Security Act of 1974, as amended (“ERISA”), the Code or common law as

a result of an investment in the Company’s shares, the Investor could be subject to liability for losses as well as civil penalties.

 

There are special considerations that apply to investing in the Company’s Shares on behalf of pension, profit sharing or 401(k) plans, health or welfare plans, individual retirement accounts or Keogh plans. If the Investor are investing the assets of any of the entities identified in the prior sentence in the Company’s Shares, Investor should satisfy yourself that:

  

  ·

The investment is consistent with your fiduciary obligations under applicable law,

including common law, ERISA and the Code;

 

  ·

The investment is made in accordance with the documents and instruments governing the

trust, plan or IRA, including a plan’s investment policy;

     
  ·

The investment satisfies the prudence and diversification requirements of Sections

404(a)(1)(B) and 404(a)(1)(C) of ERISA, if applicable, and other applicable provisions of

ERISA and the Code;

     
  · The investment will not impair the liquidity of the trust, plan or IRA;
     
  · The investment will not produce “unrelated business taxable income” for the plan or IRA;
     
  ·

The Investor will be able to value the assets of the plan annually in accordance with ERISA

requirements and applicable provisions of the applicable trust, plan or IRA document; and

     
  ·

The investment will not constitute a prohibited transaction under Section 406 of ERISA or

Section 4975 of the Code.

 

Failure to satisfy the fiduciary standards of conduct and other applicable requirements of ERISA, the Code, or other applicable statutory or common law may result in the imposition of civil penalties and can subject the fiduciary to liability for any resulting losses as well as equitable remedies. In addition, if an investment in the Company’s Shares constitutes a prohibited transaction under the Code, the “disqualified person” that engaged in the transaction may be subject to the imposition of excise taxes with respect to the amount invested.

 

Page 9

 

 

DILUTION

The Founders, Nikita and Anna Cheniuntai received their Common Stock at the inception of the Company in 2019. No Officer, Director, promoter or affiliated person has received Shares at a discount within the past year. On September 15, 2021 the Company executed a 12.0899429354:1 Stock Split for all holders of Common Stock. Therefore, Nikita and Anna Cheniuntai Shares were subject to the stock split affecting all Common Stock Shares. The issuance of the Common Stock Shares pursuant to the stock split was made at par value, with par value set at $0.0001 per Share.

PLAN OF DISTRIBUTION

The Offering will be made through general solicitation, direct solicitation, and marketing efforts whereby Investors will be directed to the Portal to invest. The Company has engaged Rialto Markets, an independent FINRA broker-dealer to assist with the Share sales in exchange for a 3% commission fee on the aggregate sales. The Offering is conducted on a best-efforts basis. No Commissions or any other renumeration for the Share sales will be provided to the Company, the Directors, any Officer, or any employee of the Company, relying on the safe harbor from broker-dealer registration set forth in Rule 3a4-1 under the Securities Exchange Act of 1934, as amended.

 

The Company has not engaged an escrow agent since there is no Minimum Offering Amount required in the Offering. The Company will not limit or restrict the sale of the Shares during this 12-month Offering. No market exists for the Shares and no market is anticipated or intended to exist in the near future, therefore there is no plan to stabilize the market for any of the securities to be offered.

 

Directors, Officers, and employees of the Company are primarily engaged in the Company’s business of developing and manufacturing Structural 3D Printing Technology, and none of them are, or have ever been, brokers nor dealers of securities. The Directors, Officers, and employees will not be compensated in connection with the sale of securities through this Offering. The Company believes that the Directors, Officers, and employees are associated persons of the Company not deemed to be brokers under Exchange Act Rule 3a4-1 because: (1) no Director, Officer, or employee is subject to a statutory disqualification, as that term is defined in section 3(a)(39) of the Exchange Act at the time of their participation; (2) no Director, Officer, or employee will be compensated in connection with his participation by the payment of commissions or by other remuneration based either directly or indirectly on transactions in connection with the sale of securities through this Offering; (3) no Director, Officer, or employee is an associated person of a broker or dealer; (4) the Directors, Officers, and employees primarily perform substantial duties for the Company other than the sale or promotion of securities; (5) no Director, Officer, or employee has acted as a broker or dealer within the preceding twelve months of the date of this Offering Circular; (6) no Director, Officer, or employee will participate in selling this Offering after more than twelve months from the Effective Date of the Offering.

 

Page 10

 

  

USE OF PROCEEDS

The Company intends to raise Offering Proceeds to engage in the following activities: (i) to fund the research, development and testing of the Apis Cor technologies; (ii) to conduct work in conjunction with real estate developers to determine final products designs and placement; (iii) to expand manufacturing capabilities through the acquisition or leasing of both manufacturing centers and business personal property in the form of equipment; (iv) to bring the Apis Cor products to market; (v) to expand marketing, manufacturing, administrative, and sales operations.

 

Use of Proceeds Table

 

Raise % of Maximum Offering Amount   100%   75%   50%%   25%
(Raise Amount)  $35,000,000   $26,250,000   $17,500,000   $8,750,000 
Product Development
for 3D Printers and
Related Technologies
   

$3,275,000

(9.36%)

    

$2,500,000

(9.52%)

    

$1,900,000

(10.86%)

    

$1,400,000

(6.00%)

 
3D Print Material
Production Facilities,
Equipment and Bulk
Trucks
   

$5,000,000

(14.29%)

    

$3,750,000

(14.29%)

    

$1,700,000

(9.71%)

    

$1,000,000

(11.43%)

 
Company  Vehicles   

$450,000

(1.29%)

    

$300,00

(1.14%)

    

$150,000

(0.86%)

    

$87,500

(1.00%)

 
Manufacturing Facilities
and Equipment
   

$5,870,000

(16.77%)

    

$4,400,000

(16.76%)

    

$3,600,000

(20.57%)

    

$1,300,000

(14.86%)

 
Product Development
for 3D Print Materials
and Building
Performance
Technologies
   

$2,400,000

(6.86%)

    

$1,800,000

(6.86%)

    

$1,200,000

(6.86%)

    

$850,000

(9.71%)

 
Manufacturing
Structural 3D Printers
for Internal Use and
Projects
   

$2,000,000

(5.71%)

    

$1,800,000

(6.86%)

    

$1,400,000

(8%)

    

$1,000,000

(11.43%)

 
Compliance, Insurance,
and Product
Certifications
   

$350,000

(1%)

    

$250,000

(0.95%)

    

$175,000

(1.00%)

    

$87,000

(1.00%)

 
Land Acquisition and
Model House
Development
   

$1,000,000

(2.86%)

    

$500,000

(1.90%)

    

$170,000

(0.97%)

    —   
Regional Showrooms
and Sales Offices
   

$350,000

(1%)

    

$200,000

(0.76%)

    

$200,000

(1.14%)

    

$100,000

(1.14%)

 
IP Portfolio Protection   

$500,000

(1.43%)

    

$500,000

(1.90%)

    

$400,000

(2.29%)

    

$400,000

(4.57%)

 
Workforce Expansion   

$12,000,000

(34.29%)

    

$9,000,000

(34.29%)

    

$5,900,000

(33.71%)

    

$2,100,000

(24%)

 
General &
Administrative
   

$555,000

(1.59%)

    

$385,000

(1.47%)

    

$100,000

(0.57%)

    

$100,000

(1.14%)

 
Product(s) Marketing   

$150,000

(0.43%)

    

$100,000

(0.38%)

    

$80,000

(0.46%)

    

$50,000

(0.57%)

 
Training and
Educational Content
Production
   

$100,000

(0.29%)

    

$75,000

(0.29%)

    

$35,000

(0.20%)

    

$25,000

(0.29%)

 
Reserve Capital   

$1,000,000

(2.86%)

    

$690,000

(2.63%)

    

$490,000

(2.80%)

    

$250,000

(2.86%)

 

 

 

$3,275,000: Product Development for Structural 3D Printers and Mix & Pump Machines

 

The Company intends to spend approximately $3,275,000 on research and development activities regarding the 3D Printing Robotics and associated technologies (excluding the 3D Print Material). These research and development activities will include, but are not limited to (1) designing, fabricating and testing new solutions in order to improve the equipment and technology (Printers, Mix & Pump Machines, Bulk Trucks) (2) after successful procedure of (1) modifying the current 3D Printing Robotics designs for manufacturing scaling; (3) modifying the current 3D Printing Materials Pump and Mixer designs for manufacturing scaling; (4) modifying the current Smart Truck designs for manufacturing scaling; (5) software improvement and development (6) incorporating technology features (7) ongoing research and development of all 3D Printing technologies for improved product(s) quality.

 

$5,000,000: 3D Print Material Production Facilities, Equipment, and Bulk Trucks

 

The Company intends to spend approximately $5,000,000 to establish and deploy batching plants to produce and supply 3D Print Material for customers. These batching plants are key component to generate revenue of 3D Print Material. Due to the potentially high cost of transporting the 3D Print Material across regions, the Company intends to have several material production facilities across the United States as the Company’s reach spreads.

 

Transportation of the 3D Print Material from the production facilities to the development site will require the use of the Company’s “Smart Trucks”. Use of these Proceeds includes expansion and maintenance of the of the Company’s truck fleet.

 

$5,870,000: Manufacturing Facilities and Equipment

 

The Company intends to use approximately $5,870,000 on Manufacturing Facilities and Equipment for the production of the Structural 3D Printing Robotics and the Mix & Pump machines. These amounts are intended to be for (1) the purchase or lease of one or more robotics manufacturing facilities; (2) the purchase or lease of necessary manufacturing equipment; and (3) tooling costs.

 

$2,400,000: Product Development for 3D Print Materials and Building Performance Technologies

 

The Company intends to spend approximately $2,400,000 on research and development activities regarding the 3D Printing Material. The Company intends to constantly improve upon the 3D Print Materials and to introduce new material mixes, designs, and potential uses.

 

Additionally, the Company intends to use these amounts to ensure the 3D Print Materials comply with building codes. The Company will commission third-party testing of the 3D Print Materials for various purposed including structural support ratings. The Company will also use these amounts to push for adoption of 3D Print Materials use within various States’ regulatory bodies. The Company intends to use these Proceeds to set up an in-house laboratory equipped with standard lab equipment and tooling needed to facilitate in-house development/testing of new components, designs, and new mix compositions before completing the third party tests and certifications.

 

$2,000,000: Manufacturing Structural 3D Robotic Printers and Mix and Pump Machines for Early Adopters and for Internal Use

 

Company intends to use $2,000,000 approximately For the manufacture of ten (10) Structural 3D Robotic Printers for:

1)Leasing out the Printers for early adopters;
2)Execution of construction projects for early Customers and internal construction projects;

 

Company intends to spend $1,000,000 of these Proceeds to manufacture approximately 5 Printers for internal use. These printers will be used to execute own construction projects, provide 3D printing services and conduct internal tests.

 

$350,000: Compliance and Insurance (OSHA, Insurances, Workman’s Comp Insurance, General Liability Insurance, etc.) and Product Certification

 

Company intends to spend $350,000 for ongoing compliance with required policies and laws which includes:

 

1)OSHA compliance for all manufacturing and production facilities of using the equipment on site;
2)Workers compensation for Company employees to operate the Structural 3D Robotic Printers on development sites;
3)General liability insurance for the manufacturing and production facilities and on-site construction carried out by Company employees;
4)Equipment and Products Liability insurance;
5)Third Party Product Certification for the Structural 3D Robotic Printers and the Mix and Pump Machines.

 

Page 11

 

 

$1,000,000: Land Acquisition and Model Home(s) Development

 

Company intends to spend $1,000,000 to acquire a real property to conduct field testing and to develop one or more model homes (or structures). These amounts include property acquisition costs, construction costs for the development of the model homes (or structures), property security costs, and testing costs.

 

$12,000,000 Workforce Expansion

 

Upon a successful Offering, the Company intends to use $12,000,000 of the Proceeds to significantly expand the workforce necessary to scale the Technology and business:

 

1)Engineering staff (research and development, product improvement)
2)Manufacturing staff
3)Management team expansion (both C-Level and middle-management)
4)Business Development and Sales staff
5)In-field Service teams, Customer Technical Support staff
6)Construction Management staff
7)Customer and In-House Training staff

 

$100,000 Training and Educational Content Creation

 

The Company currently has a set of training and educational materials called “Apis Cor University” consisting of promotional and educational videos. The Company intends to spend $100,000 of the Proceeds to expand the training content including online training for (1) prospective and current customers; (2) certification programs to become an Apis Cor repair technician, architect, or maintenance specialist; and (3) internal employee training for current and new employees. These specialists will be in addition to in-house Apis Cor’s staff.

 

$450,000: Expansion of Company Equipment Transportation Fleet

 

The Company intends to spend $450,000 for the purchase or lease of standard pick-up trucks, cars, and trailers to transport the Structural 3D Robotic Printers to and from customer development sites. These vehicles will also be used for internal logistical needs of the Company.

 

$150,000: Marketing and Public Relations

 

The Company intends to use $150,000 for marketing and public relations activities including, but not limited to advertising, content/media creation, and public acceptance campaigns for Structural 3D Printing Technology.

 

$350,000: Opening Showrooms and Sales Offices

 

The Company intends to use $350,000 for the opening of regional showrooms and sales offices to increase sales and reinforcing the Company brand. The showrooms will provide demonstrations of sample of 3D printed structures and the Company’s 3D Printing Technology. 

 

$555,000: General & Administrative Expenses

 

The Company intends to use $555,000 for general and administrative expenses including legal, accounting, and other associated expenses.

 

$500,000 Improving IP Portfolio

 

The Company intends use $500,000 of the Proceeds to protect its intellectual property through the filing and prosecution of patentable technology with both the USPTO and patents under the Patent Cooperation Treaty (the “PCT”).

 

$1,000,000 Reserve Capital

 

The Company intends use $1,000,000 of the Proceeds for reserve capital.

 

Page 12

 

 

DESCRIPTION OF THE BUSINESS

Summary

Apis Cor Inc. is a robotics technology design and manufacturing company. The Company was formed with the purpose of designing and developing the underlying robotics and construction materials to 3D print full-scale concrete single-family style houses (collectively, the “Technology” or “Structural 3D Printing Technology”).

Additive manufacturing, or 3D printing, is a process whereby a material is deposited one layer at a time to create a three-dimensional structure. Over the past 20 years, 3D printing has revolutionized the manufacturing world, providing a cheaper and more efficient way to create prototypes and test designs. Apis Cor is bringing 3D printing to building structures. Structural 3D printing allows developers to build faster, cheaper, and more consistently.

The intention of the Company is to provide advanced Structural 3D Printing Robotics and durable 3D Print Materials to developers and homebuilders to reduce the costs of building. Structural 3D printing will enable construction companies decrease labor costs, increase productivity, and enhance the quality of the building itself through consistency between structures.

History of the Business

Apis Cor Inc. is a Delaware Corporation incorporated on December 19, 2019. The Company was originally operating in Russia until 2018. The Founders then moved the principal place of business and operations to Florida. Since inception, the Company has been exclusively conducting research and development activities regarding the Technology. The Company intends to use the Proceeds of this Offering to further develop the Technology, as well as to increase manufacturing capacity and market presence.

The Company has created several prototypes and has already printed several structures using funding from the founders and through the sale of convertible promissory notes and simple agreements for future equity (“SAFES”) (see “Description of the Securities”). Below is a description of the Company’s accomplishments as of the date of this Offering Circular.

On September 15, 2021 the Company amended its Certificate of Incorporation to authorize two classes of Equity securities in addition to Common Stock, Preferred Shares. Through this filing, the Company increased the authorized number of Common Stock Shares to 400,0000,000 and Preferred Stock shares to 100,000,000. Additionally, the Amended And Restated Certificate of Incorporation affected a 12.0899429354:1 stock split for all outstanding Common Stock as of September 15, 2021.

 

The Company’s Products and Services

Apis Cor Inc. is a robotics technology design and manufacturing company. The Company was formed with the purpose of designing and developing the underlying robotics and construction materials to 3D print full-scale concrete single-family style houses and other structures.

The Company’s products and services derive directly from the 3D printing process, which enables real estate developers and the construction industry, just like others in the manufacturing sector the following benefits:

(1)Increased productivity and fast construction process;

 

(2)Better and constant quality including a drastic reduction of human error which cuts off the cost for fixing the errors and post finishing works;

 

(3)Significant reduction of reliance on human labor on job site causing an unprecedented ability to scale the development process;

 

(4)Marked increase in freedom in design for any structure. Less limitation on prefabricated materials such as cinderblocks;

(5)Marked reduction in the cost of construction through cutting the need for human labor costs.

 

Modern construction cannot keep up with the growing demand because construction heavenly mainly relies on manual labor which:

The US Census Bureau’s 2018 Survey of Construction found the average stick-built house takes 7.7 months to construct. This includes about one month for building authorization and permits, followed by 6.7 months of actual construction. Note that this timeline refers to houses built for sale, such as custom homes in a new housing development. Homes built by the homeowners themselves took considerably longer, at 12.5 months, likely due to less experience and smaller crews.

In contrast, the Company’s Structural 3D Robotic Printers do not require a large crew to operate, and are capable of building the walls of a 2,300 SF house in about 40 hours which may drastically reduce the overall construction to 2-3 months (the remaining parts like roofing, windows and finishing are still done traditionally).

To compare (average 2,300SF house, 1 floor):

Wall construction of concrete masonry house: approx. 400 hours

Wall printing using Apis Cor 3D printer: approx. 40 hours

 

Nationally, the United States is facing a shortage of more than 7.2 million affordable homes, with over 500,000 people experiencing homelessness on any given night. Due to a lack of skilled labor, the construction industry simply cannot keep up with the growing demand. The Company’s Structural 3D Printing Technology provides an optimal solution to fill the national shortage that gap by delivering more houses without filling a human’s role.

Page 13

 

Synopsis of the Company’s Structural 3D Printing Technology

The Company has invented and developed three main technologies for Structural 3D Printing. The primary technology is the Structural 3D Robotic Printer. The secondary, yet just as crucial is the proprietary 3D Print Material(s), which provides the raw material for the walls of the structure. The third major technology is the 3D Print Material mixing and pumping unit (the “Mix and Pump Machine”). The Company will supply its customers with all of these Technologies through equipment lease arrangements.

 

Structural 3D Robotic Printers

 

Apis Cor has invented and developed robotics equipment to 3D print full scale walls on various structure types, including full scale houses, using proprietary cementitious materials. Development of the Structural 3D Robotic Printers began in 2015 in Russia. The current Structural 3D Robotic Printer design weighs approximately 2,900 pounds, has the ability to print up to three floors, and only takes 30 minutes to set up. The Structural 3D Robotic Printers can be set up by two persons and is controlled by a tablet such as an iPad. The 3D Robotic Printer printing arm comes equipped with a Company-designed smart spatula installed on the printing nozzle’s end. The proprietary design prevents the "sausage" effect common to other structural 3D printers, eliminating the need for long and costly finishing processes. 

 

 

The Structural 3D Robotic Printer is mounted on tracks and includes a four-point leveling system. This ensures that the Printer is able to move around the printed structure and deposit the material in a level and consistent manner.

 

The Company intentionally made the Structural 3D Robotic Printer extremely mobile. Small enough to fit onto the bed of a pick-up truck or a trailer. Because of this, the Structural 3D Robotic Printer can be moved all around the job site. The only restriction to the printed structure’s size is the area of the development site itself. Using the Structural 3D Robotic Printer’s continuous track mobile platform, the Printer can reposition itself when a layer is complete and continue depositing 3D Print Material in a matter of minutes. This compact size increases accessibility of 3D printed structures to a greater number of developers. Additionally, setup does not require cranes or heavy machinery. The rugged lightweight design means the Structural 3D Robotic Printer can travel over any surface including sand, grass, and gravel.

 

In addition to decreased labor and opportunity costs normally associated with construction, the Structural 3D Robotic Printer allows for immeasurable amount of consistency between structures. The Company has essentially invented a skilled robot equipped with precise dosage devices and sophisticated algorithms to ensure repeatable builds with machine accuracy. 

Page 14

 

3D Print Materials

While concrete is the construction industry standard, it’s use poses myriad problems within 3D printing applications. The Company, therefore, has developed proprietary printing material(s) that would flow easily through the Mix and Pump Machine and the Structural 3D Robotic Printer’s extruder without slumping — while still bonding between layers, curing quickly, and maintaining its layer shape. The end product is a dry mortar with aggregates pre-mixed in the proper ratio, delivering perfect results every time with no guesswork.

By means of the Company’s equipment, the cementitious material is distributed layer-by-layer forming the walls. The material itself is manufactured by the Company and will exclusively be sold though the Company.

The Company intends to manufacture several types of 3D Print Materials for different uses an applications.

3D Structure Printing Design

When referring to the “3D Structural Printing Design” within this Offering Circular, it includes the proprietary  shape of the walls and methodologies employed by the Company in printing any structure. The term is inclusive in that the Company has more than one Designs for structural elements (walls).

The 3D Structural Printing Design employs a Company-designed shape designed to emulate Concrete Masonry Units (“CMU(s)”) also known as cinderblocks. CMUs are the gold-standard for resilient construction because they are independently stable and allow for reinforcement with reinforcing bars (“rebar(s)”) and other stabilization/reinforcement methods. The Company has designed the 3D Structure Printing Design to emulate CMUs with respect to the ability to sustain stability independently and with reinforcement. Additionally, the Company’s Structure Design allows for mechanical, electrical, and plumbing components to be seamlessly included in the structures.

Apis Cor's 3D printed walls are virtually identical to CMU construction walls in both form and function. This enables the 3D Structural Printing Design to:

- Conform with existing CMU-based building codes

- Resist wind, water, fire, mold, and pests

-Simplify integration with plumbing, electrical, mechanical and finishing work

The 3D Structural Printing Design was developed by Company engineers to simplify the necessary structural calculations such that the design complies with local building codes that incorporate and are based on the use of CMUs. The Company’s 3D material reaches the ability to withstand 3,627 psi of vertical pressure after 28 days of curing, exceeding construction code standards for CMUs. The 3D Structural Printing Design conforms with the International Building Code for masonry construction – which many regional/local building codes adopted and incorporate.

Page 15

 

Mixing and Pump Machine for 3D Printing Structural Material

The Company has also developed a proprietary 3D print material delivery system specific to the Company’s 3D Printing Robot. The inclusion of the mixer to the whole system reduces labor time significantly by reducing the need to mix the concrete or structuring materials by hand on the job site. The mixer will mix the correct ratio of materials and pump it to the 3D Printing Robotics.

Company Bulk Trucks

The Company also intends to purchase and deploy a fleet of proprietary and Company-owned smart bulk trucks to deliver the perfect blend of dry print material in a vacuum sealed container. Transportation of the 3D Printing Structural Material requires a vacuum sealed container and specific temperature requirements to avoid tainting of the material. The Company will develop a fleet of these specialized bulk trucks upon a successful Offering.

Page 16

 

Achievements of the Company as of the Date of this Offering Circular

The Company has already surpassed the proof of concept stage. The Company currently has working equipment, testing it on a several groundbreaking projects:

Achievement 1: Guinness World Record

In October 16, 2019 the Company completed 3D printed a two story building for the Dubai municipality which is today the largest 3D printed building on Earth and holds the World Guinness Record. Standing at 9.5 meters tall with an area of 640 square meters, it’s the world’s largest 3D printed building to date. 

Page 17

 

 

Achievement 2: NASA 3D Printed Habitat Challenge Prize

Starting in 2018 the Company collaborated with SEArch+ (a New York based architecture company) winning the three top prizes of NASA’s “3D Printed Habitat Challenge”. The Challenge was implemented in three Phases for which the collaborative team won each of the top prizes. Phase 1 was completed as of August 22, 2018

Phase 1 evaluation consisted of the following parameters:

“For this level of the competition, teams had to additively construct a foundation slab without human intervention. The slabs were evaluated and scored based on multiple criteria, including strength, durability and material composition. To test their strength, a standard Olympic shot put was dropped on each slab three times to simulate a meteor strike. For durability, each slab was subjected to freeze/thaw tests, enduring temperature extremes. The teams earned prize money based on scores assigned by a panel of subject matter experts from NASA, academia and industry.”

 

Team SEArch+|Apis Cor of New York won first place in Phase 3: Level 2 of NASA?s 3D-Printed Habitat Challenge.

Phase 2 evaluation consisted of the following parameters:

“Four teams will share a $300,000 prize for successful completion of the seal test stage of the 3D-Printed Habitat Challenge, a competition to create sustainable shelters suitable for the Moon, Mars or beyond using resources available on site in these locations. For this level of the competition, teams submitted 3D-printed samples that were tested for their ability to hold a seal, for strength and for durability in temperature extremes.”

 

hydrostatic leak testing

Credits: SEArch+/Apis Cor

Phase 3 evaluation consisted of the following parameters:

“Teams competing in NASA’s 3D-Printed Habitat Challenge completed the latest level of the competition – complete virtual construction – and the top three were awarded a share of the $100,000 prize purse. This stage of the challenge required teams to create a full-scale habitat design, using modeling software. This level built upon an earlier stage that also required virtual modeling.

Eleven team entries were scored and awarded points based on architectural layout, programming, efficient use of interior space, and the 3D-printing scalability and constructability of the habitat. Teams also prepared short videos providing insight into their designs as well as miniature 3D-printed models that came apart to showcase the interior design. Points were also awarded for aesthetic representation and realism. After evaluation by a panel of judges, NASA and challenge partner Bradley University of Peoria, Illinois, awarded the Apis Cor $33,954.11 along with two other teams.”

Team SEArch+|Apis Cor

Team SEArch+/Apis Cor won first place in the Phase 3: Level 4 software modeling stage of NASA’s 3D-Printed Habitat Challenge. The unique shape of their habitat allows for continuous reinforcement of the structure. Light enters through trough-shaped ports on the sides and top.

Page 18

 

Achievement 3: Completed Home in Missouri

The Company has used the Technology to build a single family home in Missouri. The home is approximately 750 square feet and is located in Branson, MO. The Company completed this building in mid-2021.

 

 

Status of the Apis Cor Products

The Company has announced all of the above-named products to the public through the Company website (www.apis-cor.com). All of the Technologies are past the “proof of concept” prototype stage. The designs are now being optimized for the production stage. The Company will use the Proceeds of this Offering to continue research and development activities for the underlying Technologies. This research and development process will continue through the life of the Company, but the ratio of funds devoted to research and development will decrease as funds devoted to marketing, manufacturing, and scaling activities increases. The Company’s Technologies are essentially fully deployable as of the date of this Offering Circular, however the Company will devote time and Proceeds to expand manufacturing capabilities, including minor alterations of the Technologies to achieve manufacturing scaling and efficiency. This will require a material investment of the Proceeds and Company assets to achieve the intended scaling capacity. (see “Use of Proceeds” above)

 

Principal Market and Distribution of the Company’s Products and Services

The Company has adopted an equipment leasing strategy with respect to the Structural 3D Robotic Printers, and a material sale strategy with respect to the 3D Print Material(s). In addition to these two revenue streams, the Company will provide technical assistance and customer support for its Customers.

The Company will distribute the “Apis Cor University” training and promotional materials through its website. The Company does intend to generate revenues from Apis Cor University.

The Company also intends to open regional showrooms and sales offices to increase sales and reinforce the Company brand. The showrooms will provide demonstrations of sample of 3D printed structures and the Company’s 3D Printing Technology. Furthermore, the Company intends to purchase real property and to place model homes and structures on that property for demonstration purposes.

Target Customers and Market

The Company’s target customers (the “Customers”) include, but are no limited to, the low-rising residential construction companies, contractors, subcontractors, homebuilders, and real estate developers in the United States.

The Customers the Company will be marketing to are those who build multiple units within a single development including, but not limited to, residential housing projects/subdivisions (50+ units annually). The Customers will generally have previously built with masonry and wood framed single family residences, luxury residences, and middle class residences.

In 2018 approximately 876,000 single family homes were built, 920,000 in 2020. Within the United States, there are 200 home builders who build 150+ units annually and more than 30,000 general contractors who build single-family homes.

Distribution of Apis Cor Products

Apis Cor’s goal is to become the leading manufacturer and provider of Structural 3D printing equipment through both equipment leasing, 3D Print Material sales, and associated services provided by the Company. The core of revenue growth is around the leasing of the Structural 3D Robotic Printers and the sale of the 3D print material.

The Company intends to market the novel technologies by initially providing printing services acting as a subcontractor or executing own construction projects acting as a developer and/or construction partner. The goal of penetration strategy is to increase the customer acceptance, get more cases of permitted houses, and improve the product to a stage ready for mass production and use.

The Company will prove the Technology to potential customers by delivering information regarding the successful cases of 3D printed houses to increase customer acceptance. Although the Technology brings significant interest from potential customers, many are cautious to adopt the construction methods as a result of the novelty of the Company’s products. Rather than taking the perceived risk of being early adopters, many potential Customers will want to see more successful cases of 3D printed houses, smooth use of the equipment, and examples of how easily the Customers can learn to operate the equipment.

The Company will expand and build the in-house sales department to (1) execute direct outreach to the homebuilders and developers; (2) work with inbound inquires, educating them about the Technology and informing them as to the Company’s services.

 

The Company intends to open several regional showrooms in order to demonstrate the Company’s printed walls and other non-structural 3D printed objects and as a location for personal meetings with Customers. The showrooms are intended to raise awareness about the Technology in order to increase sales of the Company’s products and services. Additionally, the Company intends to build several model houses around the country to demonstrate the end product as well as building permit process, building performance features (insulation, reinforcement, different finishes, etc.).

 

The Company will also increase the advertising profile of its Apis Cor University in order to educate potential customers about the Technology. This will feature both free and paid videos demonstrating the Company’s products and services.

 

Apis Cor will also strive to be featured in widespread media features from documentary production companies. The Company has been contacted on several occasions by these production companies, but has not been able to be featured due to capital restraints.

 

Competitive Advantages

There are a handful of companies with strong presence and positive track record in the 3D printing construction market. However, most of these competitors use bulky equipment and expensive methods. Because of this, the competitors do not provide a service that achieves significant cost savings relative to traditional construction.

Apis Cor’s advantage is the unique design of the Structural 3D Robotic Printers which feature true mobility and compact dimensions causing the Technology to be easy to use and very scalable. The mobility of the equipment allows the Technology to print houses of any square footage, as the Structural 3D Robotic Printers can be easily moved along a whole construction area. No other current 3D construction technology matches this capability.

 

Special Purpose Entities

 

The Company may establish Special Purpose Entities (if singular “SPE”, if plural “SPEs”) for the sole purpose of (1) acquiring, purchasing, disposing of, transferring, developing, redeveloping, or rehabilitating one or more properties; (2) acting as subcontractor(s) for one or more projects; or (3) acquiring, purchasing, disposing of, transferring, developing, redeveloping, rehabilitating, and/or renting business personal property including, but not limited to equipment and other business personal property. Every SPE is intended to be a wholly-owned or wholly-controlled subsidiary. The Board has the sole and absolute discretion as to whether a Company will utilize a SPE structure for any transaction or series of transactions. Furthermore, the Board has sole and absolute discretion as to the structuring, including fee schedules, compensation, and governance, of any SPE.

 

Employees

As of the date of this Offering Circular, the Company has seven employees. Five of these employees are full time.

Legal Proceedings

The Company is not presently a party to any material litigation, nor is any litigation known to be threatened against the Company. Furthermore, the Company has no bankruptcies, investigations, or criminal proceedings to disclose.

 

Page 19

 

 

DESCRIPTION OF PROPERTY

As of the Date of this offering Circular, the Company does not own real property or business personal property of material significance.

Page 20

 

MANAGEMENT’S DISCUSSION AND ANALYSIS OF THE FINANCIAL CONDITION AND RESULT OF OPERATIONS

Apis Cor Inc. (“the Company”) is a privately-held entity organized in December 2019 in the State of Delaware and began operations in January 2020. Therefore, a year-over-year discussion of material changes cannot be included.

Components of Results of Operations 

The following discussion of our financial conditions and results of operations should be read in conjunction with the financial statements and the related notes included elsewhere in this Offering Statement. The following discussion contains forward-looking statements that reflect our plans, estimates and beliefs. The Company’s actual results could differ significantly from those discussed in the forward-looking statements. Unless otherwise indicated, the latest results discussed below are as of December 31, 2020.

Revenue

The Company is, and has been, solely focused on further development of its Technologies. In FY2020 the Company did not generate revenues and anticipates to generate revenues upon a successful Offering.

Operating Expenses

 

The Company classifies its operating expenses as research and development, general and administrative expenses, and other operating expenses (professional fees, travel and entertainment, rent, and advertising).

 

Research and Development Expense

 

The Company’s research and development efforts are focused on the continued development of the Technologies. Research and development expenses consist primarily of salaries, materials, tooling, shipping costs, manufacturing costs, and testing costs to design, develop, and test the Technologies. Also included are parts, tools and equipment acquired to produce prototypes for testing.

 

In FY2020, the Company spent $369,335 on research and development expenses. The Company anticipates that the Company will increase these expenses significantly upon a successful Offering. (see “Use of Proceeds”) above.

 

General and Administrative

 

The Company spent $78,434 on general and administrative expenses for FY2020. The Company anticipates these expenses will increase significantly upon a successful Offering. (see “Use of Proceeds”) above. These expenses consisted of meals, storage, software, automobile expenses, subcontractor labor, banking and related and services.

 

Net Loss from Operating Activities

 

During FY2020, the Company was solely focused on developing its Technologies and did not generate any revenue. In FY2020, the Company had a Net Loss From Operating Activities of $484,509. The Company’s Technologies have made significant improvements, and Management believes that revenues will increase significantly in the future. This belief is based on the fact that the Company has several functional prototypes of many of the Technologies and is ready to bring marketable products to the market upon a successful Offering.

 

Due to Shareholders

 

Due to Shareholders increased from $0 at December 31, 2019 to $ 4,522 at December 31, 2020. The increase was driven by advances made by Shareholders to fund the Company’s operating activities.

 

Liquidity and Capital Resources

 

As of December 31, 2020, the Company had cash of $61,755, total assets of $213,164, working capital deficit of $185,545 and stockholders’ deficit of $484,409. The Company has financed its operations primarily through a combination of SAFE agreements and Convertible Notes Payable. The Company issued additional SAFE contracts of $1,340,000 from December 31, 2020 to September 9, 2021.

 

The Company will have additional capital requirements during fiscal year 2021 to bring its functional prototypes to market . Therefore, the Company will attempt to raise additional capital through the sale of its securities in this Regulation A+ offering. The Company’s initial offering is for a maximum of 35,000,000 shares of its Common Stock at price of $1.00 per share, with potential aggregate gross proceeds of $35,000,000.

 

There can be no assurance that the Company will be successful in acquiring additional funding at levels sufficient to fund its future capital requirements. If the Company is unable to raise additional capital in sufficient amounts or on terms acceptable to it, the Company may have to significantly reduce, delay, scale back or discontinue the development of its technologies and patents or discontinue operations completely.

 

Page 21

 

 

DIRECTORS, EXECUTIVE OFFICER, AND SIGNIFICANT EMPLOYEES

Directors

Name  Position  Age  Term of Office
Anna Cheniuntai 

Director 

   28    March 2020 - Present 
Nikita Cheniuntai 

Director

   31    December 2019 - Present 

Officers

Name  Position  Age  Term of Office
Anna Cheniuntai  Chief Executive Officer   28    March 2020 - Present 
Nikita Cheniuntai  Chief Technology Officer   31    December 2019 - Present 

Significant Employees

Name  Position  Age  Term of Office
Trevor Ragno  Director of Building Science and Performance   26    March 2020 - Present 
Jennifer Lynn McKinney  Manager of Business Operations   53    June 2021 - Present 

Nikita Cheniuntai, Founder and CTO

Education and Experience

Nikita Cheniuntai is an inventor, engineer, and entrepreneur with extensive experience in robotics and construction. His first company specialized in the manufacturing of industrial CNC machines and composite materials used for construction. After this position, Nikita founded a construction company. In 2014, Nikita executed two projects totaling approximately $5,000,000 USD in relation to building infrastructure for Olympic Games in Sochi, Russia. These projects for the Olympics were to manufacture and deploy 5,000 signs (within only six months). These signs were made with concrete, metal frame, and high-resolution printed information - everything according to strict design requirements by the International Olympic Games Committee. Nikita’s exceptional experience in engineering and fabrication caused this previous company to execute the project on time and on such a high level that the company was recognized by Organizing Committees for the Olympic Games. Later, Nikita decided to apply his engineering talent and experience to change the way developers build today by founding Apis Cor. Nikita is an author of several patents related to Apis Cor Technology.

Nikita and his work have been recognized with several awards, including:

Publications and Awards

-Autodesk Technology Center in Boston - Resident

-Alumni of Alchemist Accelerator - 2020

-2020 list of Maverick Awards winners byBuiltWorlds - April 2020

-Leaders of Tomorrow, 49th St. Gallen Symposium, Switzerland - April 2019

-1st Place, NASA Phase 3 Construction Level 1&2, Final Design Level of 3D Printed-Habitat

-Centennial Challenge by NASA - 2018-2019 (see “Narrative of the Business” above)

-50 EMERGING GLOBAL ENTREPRENEURS TO WATCH IN 2017, by INC Magazine - April 2017

-Kairos50, Kairos Society, New York - Apr 2017

 

Duties of Nikita with the Company as CTO:

(1) Product Development and Design (including software and hardware);

 

(2) Design and direction of the Technology;

 

(3) Building technical team; selecting the key employees and C-Suite officers related to technology side of the business;

 

(4) Setup manufacturing processes; determining fabrication and manufacturing processes, approaches and technologies;

 

(5) Determining key vendors and suppliers;

 

(6) Driving Technology and product development strategy.

Anna Cheniuntai, co-founder and CEO

Education and Experience

Anna Cheniuntai is the Chief Executive Officer of Apis Cor. After earning her bachelor’s degree in Space Physics in 2014, Anna pursued a career in scientific research to entrepreneurship. She joined construction and industrial machinery manufacturing ventures pursued by Nikita Cheniuntai. Working alongside Nikita, Anna had successfully managed a $5M worth project to construct and deploy the ground navigation system around the infrastructure of Olympic Games, 2014.

Duties of Anna with the Company as CEO:

(1) Directing the Operations of the Company;

 

(2) Directing day-to-day affairs of the Company;

 

(3) Implementing business and sales strategies;

 

(4) Finding, recruiting, vetting key employees including new Executive Officers and Significant Employees.

 

Page 22

 

 

Trevor Ragno, Director of Building Science and Performance

Education and Experience

Trevor Ragno is the Director of Building Science and Performance for Apis Cor. He has two Bachelor of Science degrees in both Real Estate and Business Management with an Associate’s degree in Urban Planning. He received a Masters degree in Real Estate Development from Clemson University - College of Business

Since 2016, Trevor Ragno has been a Chief Real Estate Partner of Aeronody Corporation, an Autonomous Aerial Systems (AAS) company offering remote centralized inspections and monitoring services using commercial UAVs to clients in the energy and utilities, critical infrastructure, agriculture and forestry, and public safety.

Duties of Trevor with the Company as Director of Building Science and Performance: 

 

(1) Research, develop, and implement emerging and current applied construction technologies for construction 3D printing processes;

 

(2) Research and develop the construction technologies and solutions needed to integrate robotics 3D printing with conventional construction technologies;

 

(3) Development of educational content and information needed to demonstrate the integration of 3D printing with conventional construction technologies;

 

(4) Development of integration systems and technologies to improve and facilitate the use of the Company’s Structural 3D Robotic Printers with conventional construction methods;

 

(5) Heading the Apis Cor University project. Developing strategies and implementation of the training centers and training courses for current and potential Customers;

 

(6) Working with field personnel to train and educate them on technologies within current and future construction projects;

 

(7) Ensuring the correct implementation of the 3D Printing Technology with the construction projects;

 

(8)  Public speaking and presentations at industry events;

 

(9)  Building the training department of printer operators and other in-field staff.  

 

Jennifer Lynn McKinney, Manager of Business Operations

 

Jennifer is the Manager of Business Operations for Apis Cor. Jennifer has been with the Company since June 2021. She has functioned in operations as an assistant to Nikita and Anna. Jennifer has spent her career as direct support within many start-ups. This included the creation of employment manuals, internal policies and procedures, helped with business development, building and maintaining customer relationships. Jennifer also took the lead on hiring employees.   

 

Duties of Jennifer as Manager of Business Operations:

 

As Manager of Business of Operations Jennifer will plans and organizes daily activities related to business operations, including:

 

(1) Overseeing shipping and receiving functions;

 

(2) Assisting the CEO with the execution of strategic and key projects and business direction;

 

(3) Assisting CEO with initiating, maintaining and developing the key and strategic partnerships, business relationships and third-party service providers;

 

(4) Supporting CEO with Business Development;

 

(5) Coordinating with and supervising marketing, sales, and production departments to determine timing, pricing, and products to be sold in the Company’s showroom;

 

(6) Overseeing the hiring process for employees;

 

Legal Proceedings Disclosure

 

There are no legal proceedings to disclose on behalf of the Company, its Directors, or Officers, including but not limited to bankruptcy, civil, or criminal proceedings.

 

Family Relationship Disclosure

 

Nikita and Anna Cheniuntai are husband and wife.

 

Page 23

 

 

COMPENSATION OF DIRECTORS AND EXECUTIVES

 

Name  Capacities in which Compensation was Received  Cash Compensation  Other Compensation
(Cash Value)
  Total Compensation
Nikita Cheniuntai  CTO  $33,200.00*  $0   $33,200.00 
Anna Cheniuntai  CEO  $24,800.00**  $0   $24,800.00 

 

*Nikita Cheniuntai compensation for FY 2020 was as a 1099 independent contractor totaling $33,200.00 for 2020. He received $24,760.48 as a 1099 independent contractor until May 1, 2021. On May 3, 2021 he was converted into a W-2 employee with an annual salary of $33,382.08. On August 2, 2021 his salary was increased to $76,403.28 annually.

 

**Anna Cheniuntai compensation for FY 2020 was as a 1099 independent contractor totaling $24,800.00 for 2020. She received $28,973.23 as a 1099 independent contractor until May 1, 2021. On May 3, 2021 she was converted into a W-2 employee with an annual salary of $33,382.08. On August 2, 2021 her salary was increased to $76,403.28 annually.

 

Increases to Compensation for the Officers

The Company intends to increase the annual salaries of the above-named persons upon the receipt of sufficient Proceeds pursuant to this Offering. The proposed increase is not tied to the performance of the Officers. The salaries of the Officers will be set as below:

Nikita Cheniuntai – $96,000 gross annual salary

Anna Cheniuntai – $96,000 gross annual salary

Compensation pursuant to the Company Stock Options Plan

The Company has allocated 6,044,971 Shares (6%) of the Company’s Common Stock to be subject to the 2021 Equity Ownership Plan. The plan was adopted on September 15, 2021. As of the date of the Offering Circular no compensation has been granted to the Directors or Officers under this plan.

 

 

Page 24

 

 

SECURITY OWNERSHIP OF MANAGEMENT AND CERTAIN SECURITYHOLDERS

 

Title of Class  Name of Beneficial Owner  Amount of Shares Owned  Amount  of Shares  Acquirable  Percent of Class
Common Stock  Nikita Cheniuntai   62,766,954    0    62.3%
Common Stock  Anna Cheniuntai   26,900,123    0    26.7%
SAFEs*  At One Ventures   0    31,713,083 (Preferred Stock Shares)    80.93%

 

*Throughout 2020, the Company issued SAFEs to raise capital. The conversion of the SAFEs will only be triggered upon the pricing and issuance of Preferred Stock. As of the date of this Offering Circular, no shares of preferred stock have been issued or are outstanding. (see “Description of the Securities” below)

 

Nikita and Anna Cheniuntai: 3060 Venture Lane #101, Melbourne, FL 32934

At One Ventures: 767 19th Ave. #2, San Fransisco, CA 94121

 

Page 25

 

 

INTEREST OF MANAGEMENT IN CERTAIN TRANSACTIONS

 

Loan to Nikita Cheniuntai

 

On January 3, 2020 the Company granted Nikita Cheniuntai a loan in the form of a promissory note with the principal amount of $43,000 at an interest rate of 2.00% per annum. The maturity date of the promissory note is three years, coming to maturity on January 3, 2023. Nikita Cheniuntai is the co-founder and Chief Technical Officer of Apis Cor.

 

This promissory note was made in light of the COVID-19 Pandemic and the economic difficulties resulting therefrom.

 

Patent(s) and Trademark Assignments from Various Persons to the Company

 

Name on Patent (Application) Number of Patent (Applications)
Nikita Cheniuntai 3 Non-provisional Patent applications
Nikita Cheniuntai and Anna Cheniuntai 1 Provisional Patent Application, 1 Non-provisional Patent Application
Viktor Skundrik 1 Non-provisional Patent Application
Anna Cheniuntai and Sergey Nefedov 1 Non-provisional Patent Application

 

Nominal consideration ($1.00) will be given to these persons for the assignment of each of the patents once the assignments are approved by the United States Patent and Trademark Office.

 

Page 26

 

 

 

DESCRIPTION OF THE SECURITIES

 

Summary of Company Equity

 

The Company has two authorized classes of equity stock, Preferred Stock and Common Stock. As of the date of this Offering Circular, no Preferred Stock is outstanding. For rights associated with Preferred Stock refer to Exhibit 3 “Amended And Restated Certificate of Incorporation”

 

SAFEs and Convertible Notes

 

Throughout 2020 and 2021, the Company issued Convertible Notes and SAFEs to raise capital. The conversion of the SAFEs is triggered when the Company issues and sells Preferred Stock at a fixed valuation, or upon a liquidation event. As of the date of this Offering Circular, no shares of Preferred Stock have been issued or are outstanding.

 

The conversion of the Convertible Notes is triggered if the Company sells Shares of its equity securities with an aggregate sales price of not less than $1,000,000. All convertible notes, except for one, provide for a conversion of the Convertible Note to Preferred Stock. The one exception allows for conversion of the Convertible Note to both Preferred and Common Stock.

 

 

Page 27

 

 

Description of the Common Stock Offered through this Offering

 

The voting, dividend and liquidation rights of the holders of the Common Stock are subject to and qualified by the rights, powers and preferences of the holders of the Preferred Stock set forth herein.

Dividends

 

The Corporation will not declare, pay or set aside any dividends, including any cash distributions, on Shares of any other class or series of capital stock of the Corporation (other than dividends on Shares of Common Stock payable in Shares of Common Stock) unless the holders of the Series A Preferred Stock then outstanding shall first receive, or simultaneously receive, an equivalent or greater dividend on each outstanding share of Series A Preferred Stock.

Voting

 

The holders of the Common Stock are entitled to one vote for each share of Common Stock held at all meetings of stockholders (and written actions in lieu of meetings). The number of authorized Shares of Common Stock may be increased or decreased (but not below the number of shares thereof then outstanding) by the affirmative vote of the holders of shares of capital stock of the Corporation representing a majority of the votes represented by all outstanding shares of capital stock of the Corporation entitled to vote, irrespective of the provisions of Section 242(b)(2) of the General Corporation Law of Delaware.

 

Distributions and Liquidation

 

In the event of any voluntary or involuntary liquidation, dissolution or winding up of the Corporation (but not including a Deemed Liquidation Event), after the payment of all preferential amounts required to be paid to the holders of shares of Series A Preferred Stock, the remaining assets of the Corporation available for distribution to its stockholders shall be distributed among the holders of Shares of Common Stock, pro rata based on the number of Shares held by each such holder.

 

“Deemed Liquidation Events”

 

“Deemed Liquidation Events” include

(1) a merger or consolidation in which (i) the Corporation is a constituent party; or (ii) a subsidiary of the Corporation is a constituent party and the Corporation issues shares of its capital stock pursuant to such merger or consolidation,

(2) the sale, lease, transfer, exclusive license or other disposition, in a single transaction or series of related transactions, by the Corporation or any subsidiary of the Corporation of all or substantially all the assets of the Corporation and its subsidiaries taken as a whole.

 

Distributions in forms other than Cash

 

If the amount deemed paid or distributed pursuant to a Deemed Liquidation Event is made in property other than in cash, the value of such distribution shall be the fair market value of such property, as determined pursuant to Section 2.3.3 of the Amended And Restated Certificate of Incorporation (see “Exhibit 1A-2A”):

Redemption Provisions

 

Common Stock does not have any redemption rights.

 

Sinking Fund Provisions

 

The Amended And Restated Certificate of Incorporation does not contain any Sinking Fund Provisions.

 

Liability to Further Calls

 

The Amended And Restated Certificate of Incorporation does not contain any provisions regarding liability to further calls.

 

Restrictions on Alienability

 

The Shares have no restrictions on alienability for Shares of Common Stock.

 

Page 28

 

 

PART F/S

 

Financial Statements and Report of
Independent Certified Public Accountants

Apis Cor Inc.

December 31, 2020

  

Independent Auditor’s Report

 

To the Board of Directors and Stockholders of Apis Cor Inc.

Report on the Financial Statements

We have audited the accompanying financial statements Apis Cor Inc. (the “Company”) which comprise the balance sheet as of December 31, 2020, and the related statements of operations, stockholders’ deficit, and cash flows for the year then ended, and the related notes to the financial statements.

Management’s Responsibility for the Financial Statements

Management is responsible for the preparation and fair presentation of these financial statements in accordance with accounting principles generally accepted in the United States of America; this includes the design, implementation, and maintenance of internal control relevant to the preparation and fair presentation of financial statements that are free from material misstatement, whether due to fraud or error.

Auditor’s Responsibility

Our responsibility is to express an opinion on these financial statements based on our audit. We conducted our audit in accordance with auditing standards generally accepted in the United States of America. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free from material misstatement.

An audit involves performing procedures to obtain audit evidence about the amounts and disclosures in the financial statements. The procedures selected depend on the auditor’s judgment, including the assessment of the risks of material misstatement of the financial statements, whether due to fraud or error. In making those risk assessments, the auditor considers internal control relevant to the Company’s preparation and fair presentation of the financial statements in order to design audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control. Accordingly, we express no such opinion. An audit also includes evaluating the appropriateness of accounting policies used and the reasonableness of significant accounting estimates made by management, as well as evaluating the overall presentation of the financial statements.

We believe that the audit evidence we have obtained is sufficient and appropriate to provide a basis for our audit opinion.

Opinion

In our opinion, the financial statements referred to above present fairly, in all material respects, the financial position of the Company as of December 31, 2020, and the results of its operations and cash flows for the year then ended in accordance with accounting principles generally accepted in the United States of America.

Going Concern

The accompanying financial statements have been prepared assuming that the Company will continue as a going concern. As discussed in Note C to the financial statements, at December 31, 2020, the Company had an accumulated deficit of approximately $485,000. The net cash used in operating activities for the year ended December 31, 2020 totaled approximately $286,000. These conditions raise substantial doubt about its ability to continue as a going concern. Management’s plans regarding those matters also are described in Note C. The financial statements do not include any adjustments that might result from the outcome of this uncertainty. Our opinion is not modified with respect to that matter.


s/Assurance Dimensions 

Jacksonville, Florida

September 9, 2021

 

Page 29

 

 

Apis Cor Inc.    
Balance Sheet
December 31, 2020
     
     
ASSETS
Current Assets        
Cash   $ 61,755  
Prepaid expenses     2,731  
Total Current Assets     64,486  
         
Non-Current Assets        
Property and equipment, net     105,681  
Loan receivable from stockholder     43,000  
TOTAL ASSETS   $ 213,167  
         
LIABILITIES AND STOCKHOLDERS' DEFICIT        
Liabilities        
    Current Liabilities        
Accounts payable   $ 18,000  
Customer deposits     170,719  
Advances from stockholders     4,522  
Current portion of equipment loans payable     6,149  
Convertible note payable and accrued interest     50,641  
Total Current Liabilities     250,031  
         
    Long-Term Liabilities        
Equipment loans payable     37,123  
SAFE liabilities     290,000  
Convertible notes payable and accrued interest     120,422  
TOTAL LIABILITIES     697,576  
         
Stockholders' Deficit        
Common stock, $0.00001 par value, 10,000,000 authorized, and        
8,333,333 issued and outstanding     100  
Accumulated deficit     (484,509 )
TOTAL STOCKHOLDERS' DEFICIT     (484,409 )
         
TOTAL LIABILITIES AND        
STOCKHOLDERS' DEFICIT   $ 213,167  
         
The accompanying notes are an integral part of this financial statement.        

 

 

Apis Cor Inc.
Statement of Operations
For the Year Ended December 31, 2020
    
REVENUE   
Total revenue  $-
    
EXPENSES   
Research and development   369,335 
Other general and administrative   78,434 
Professional fees   14,664 
Travel and entertainment   11,351 
Rent expense   6,082 
Depreciation   1,738 
Advertising   1,368 
Total operating expenses   482,972 
      
LOSS FROM OPERATIONS   (482,972)
      
OTHER INCOME (EXPENSES)     
Interest expense   (1,862)
Interest income   325 
      
NET LOSS  $(484,509)

 

 

Apis Cor Inc.
Statement of Stockholders' Deficit
For the Year Ended December 31, 2020
             
   Common Stock  Accumulated   
   Shares  Amount  Deficit  Total
             
January 1, 2020  $-  $-  $-  $-
             
Issuance of common stock   8,333,333    100    —      100 
                     
Net loss   —      —      (484,509)   (484,509)
                     
December 31, 2020   8,333,333   $100   $(484,509)  $(484,409)

 

 

Apis Cor Inc.   
Statement of Cash Flows   
For the Year Ended December 31, 2020   
    
    
Cash flows from operating activities:     

 

Net loss

  $(484,509)
Adjustments to reconcile net loss to net cash     
used by operating activities:     
Depreciation   1,738 
Services received in exchange for convertible notes payable   9,800 
Accrued interest on convertible notes payable   1,262 
Increase (decrease) in cash due to changes in:     
Prepaid expenses   (2,730)
Accounts payable   18,000 
Customer deposits   170,720 
               Net cash used by operating activities   (285,719)
      
Cash flows from investing activities:     
Purchase of property and equipment   (107,419)
               Net cash used by investing activities   (107,419)
      
Cash flows from financing activities:     
Proceeds from equipment loans payable   44,158 
Repayments on equipment loans payable   (887)
Proceeds from the issuance of SAFE liabilities   290,000 
Proceeds from the issuance of convertible notes payable   160,000 
Net loans to and advances from stockholders   (38,478)
Proceeds from the issuance of common stock   100 
Net cash provided by financing activities   454,893 
      
Net increase in cash   61,755 
Cash, beginning of year   —   
Cash, end of year  $61,755 
      
Supplemental and non-cash disclosures     
Cash paid for income taxes  $—   
Cash paid for interest  $—   

 

 

Note A – Nature of Business and Organization

Apis Cor Inc. (“the Company”) is a privately-held entity organized in December 2019 in the State of Delaware and began operations in January 2020. The Company is a developer of on-site circular mobile 3D printers built for the construction industry. The Company offers a robotics arm that distributes a concrete mortar to create the desired shape of a building, thus enabling clients to save time and money. As of the date of the audit opinion, the Company had not yet sold any printers.

Note B – Significant Accounting Policies

Basis of Presentation

The financial statements are prepared in accordance with accounting principles generally accepted in the United States of America (“U.S. GAAP”).

Use of Estimates

The preparation of financial statements in conformity with U.S. GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

Recent Accounting Pronouncements

Accounting standards promulgated by the Financial Accounting Standards Board (“FASB”) are subject to change. Changes in such standards may have an impact on the Company’s future financial statements.

The Company periodically reviews new accounting standards that are issued. Although some of these accounting standards may be applicable to the Company, the Company has not identified any new standards that it believes merit further discussion, and the Company expects that none would have a significant impact on its financial statements.

Cash and Cash Equivalents

Cash and cash equivalents include cash on hand and on deposit. The Company deposits cash and cash equivalents with financial institutions which management believes is of high credit quality. At December 31, 2020, there were no cash equivalents.

Property and Equipment

Property and equipment are recorded at cost. Depreciation is calculated using the straight-line method over the estimated useful lives of the assets. Maintenance and repairs are charged to expense as incurred. Betterments and renewals are capitalized. When property and equipment are sold or otherwise disposed of, the asset account and related accumulated depreciation account are relieved, and any gain or loss is included in operations. The straight-line method of depreciation is used over the following estimated useful lives:

 

 Vehicles    8 Years 
 Trailers    10 Years 
 Equipment    5-10 Years 

Additions and improvements are capitalized, while replacements, maintenance, and repairs, which do not improve or extend the life of the respective assets, are expensed as incurred. Gains and losses from the disposition of assets are recorded in the year of disposition.

 

Page 30

 

 

Note B – Significant Account Policies (continued)

Customer Deposits

Customer deposits are recorded when payments from customers are received for future sales or services and are recognized as revenue on the date of the completion of the building workshop or training program or delivery of equipment. As of December 31, 2020, customer deposits totaled approximately $171,000.

Advances from Stockholders

Advances from stockholders are non-interest bearing. The advances from stockholders are expected to be repaid in 2021 and are classified as current liabilities in the accompanying balance sheet.

Research and Development

Research is planned search or critical investigation aimed at discovery of new knowledge with the hope that such knowledge will be useful in developing a new product or service (hereinafter “product”) or a new process or technique (hereinafter “process”) or in bringing about a significant improvement to an existing product or process. Development is the translation of research findings or other knowledge into a plan or design for a new product or process or for a significant improvement to an existing product or process whether intended for sale or use. It includes the conceptual formulation, design, and testing of product alternatives, construction of prototypes, and operation of pilot plants. It does not include routine or periodic alterations to existing products, production lines, manufacturing processes, and other on-going operations even though those alterations may represent improvements and it does not include market research or market testing activities. Per FASB Accounting Standards Codification (“ASC”) 730, Research and Development, the Company expenses research and development cost as incurred.  Research and development costs for the year ended December 31, 2020 was approximately $369,000.

Advertising

Advertising costs are expensed when incurred. During the year ended December 31, 2020, advertising related expenses were approximately $1,400.

Income Taxes

The Company utilizes an asset and liability approach to financial accounting and reporting for income taxes. Deferred income tax assets and liabilities are computed annually for differences between the financial statement and tax basis of assets and liabilities that will result in taxable deductible amounts in the future based on enacted tax laws and rates applicable to the periods in which the differences are expected to affect taxable income. Valuation allowances are established when necessary to reduce deferred tax assets to the amount expected to be realized.

The Company’s income tax returns are subject to review and examination by federal and state authorities in accordance with prescribed statutes. When accrued, interest and penalties related to unpaid taxes are included in income tax expense.

The Company adopted the income tax standard for uncertain tax positions. As a result of this implementation, the Company evaluated its tax positions and determined that it has no uncertain tax positions as of December 31, 2020. The Company’s 2020 tax year is open for examination for federal and state taxing authorities.

Note C – Liquidity

The accompanying financial statements are prepared assuming the Company will continue as a going concern. At December 31, 2020, the Company had an accumulated deficit of approximately $485,000. The net cash used in operating activities for the year ended December 31, 2020 totaled approximately $286,000.

 

Page 31

 

 

Note C – Liquidity (continued)

Management believes that sales of its 3D printers will commence in 2021, and that with additional financing from additional SAFE agreements in 2021, the Company will have sufficient funds to continue operations for at least twelve months from the date of this report.

Note D – Property and Equipment

Property and equipment consists of the following as of December 31, 2020:

    
   Gross Carrying Amount  Accumulated Depreciation  Net Carrying Amount
Vehicles  $53,714   $(1,679)  $52,035 
Trailers   31,375    (59)   31,316 
Equipment   22,330    —      22,330 
Total property and equipment  $107,419   $(1,738)  $105,681 

 

For the year ended December 31, 2020, total depreciation expense was approximately $2,000. At December 31, 2020, there was approximately $46,000 in property and equipment that had not yet been placed in service.

Note E - Loan Receivable from Stockholder

On January 3, 2020, the Company entered into an unsecured promissory note with a stockholder for $43,000, with interest at 2% per annum. The note matures on the third anniversary of the effective date, with the principal balance outstanding plus accrued but unpaid interest being due and payable on the maturity date. As of December 31, 2020, accrued interest of $325 was paid by the stockholder and is recorded in interest income in the financial statements.

Note F – Equipment Loan Payable

On September 28, 2020, the Company purchased equipment and entered into a loan in the amount of $36,933. This loan has a 75-month term with an interest rate of 7.24% and a monthly payment of $615. Interest expense paid during 2020 totaled $437. As of December 31, 2020, the outstanding principal balance was $36,140, with $4,966 of the total payable recorded as a current liability.

On November 4, 2020, the Company purchased an additional piece of equipment and entered into a loan in the amount of $7,125. This loan has a 60-month term with an interest rate of 10.49% and a monthly payment of $155. Interest expense paid during 2020 totaled $62. As of December 31, 2020, the outstanding principal balance was $7,132, with $1,183 of the total payable recorded as a current liability.

The aggregate future maturities of notes payable are as follows as of December 31, 2020:

Years Ending December 31,  Amount
 2021   $6,149 
 2022    6,821 
 2023    7,385 
 2024    7,997 
 2025    8,506 
 Thereafter    6,414 
     $43,272 

 

Page 32

 

 

Note G – SAFE Contracts

During 2020, the Company offered their investors a Simple Agreement for Future Equity (“SAFE”) contract, which allowed an investor to make an upfront payment for the right to future Standard or SAFE Preferred Shares issued in the next equity financing round at a discount of 0% to 85%. Upon conversion, these shareholders would have the same rights as any other preferred shareholders, if any. The key events that will cause conversion of these agreements into future equity include:

Equity Financing: If there is an equity financing before the termination of this SAFE, on the initial closing of such equity financing, this SAFE will automatically convert into the greater of: (1) the number of shares of Standard Preferred Stock equal to the purchase amount divided by the lowest price per share of the Standard Preferred Stock; or (2) the number of shares of SAFE Preferred Stock equal to the purchase amount divided by the SAFE price.

Liquidity Event: If there is a liquidity event before the expiration or termination of this SAFE, this SAFE will automatically be entitled (subject to the liquidation priority set forth below) to receive a portion of proceeds, due and payable to the investor immediately prior to, or concurrent with, the consummation of such liquidity event, equal to the greater of (i) the purchase amount or (ii) the amount payable on the number of shares of common stock equal to the purchase amount divided by the liquidity price. If any of the Company’s security holders are given a choice as to the form and amount of proceeds to be received in a liquidity event, the investor will be given the same choice, provided that the investor may not choose to receive a form of consideration that the investor would be ineligible to receive as a result of the investor’s failure to satisfy any requirement or limitation generally applicable to the Company’s security holders, or under any applicable laws.

Dissolution Event: If there is a dissolution event before the termination of this SAFE, the investor will automatically be entitled (subject to the liquidation priority) to receive a portion of proceeds equal to the purchase amount, due and payable to the investor immediately prior to the consummation of the dissolution event.

Liquidation Priority: In a liquidity event or dissolution event, this SAFE is intended to operate like standard non-participating Preferred Stock. The investor’s right to receive its purchase amount is:

(i)Junior to payment of outstanding indebtedness and creditor claims, including contractual claims for payment and convertible promissory notes (to the extent such convertible promissory notes are not actually or notionally converted into common stock);
(ii)On par with payments for other SAFEs and/or preferred stock, and if the applicable proceeds are insufficient to permit full payments to the investor and such other SAFEs and/or preferred stock, the applicable proceeds will be distributed pro rata to the investor and such other SAFEs and/or preferred stock in proportion to the full payments that would otherwise be due; and
(iii)Senior to payments for common stock.

The investor’s right to receive his or her conversion amount is (a) on par with payments for common stock and other SAFEs and/or preferred stock who are also receiving conversion amounts or proceeds on a similar as-converted to common stock basis, and (b) junior to payments described in clauses (i) and (ii) above (in the latter case, to the extent such payments are proceeds or similar liquidation preferences).

Termination: This SAFE will automatically terminate (without relieving the Company of any obligations arising from a prior breach of or non-compliance with this SAFE) immediately following the earliest to occur of: (i) the issuance of common stock to the investor pursuant to the automatic conversion of this SAFE under an equity financing; or (ii) the payment, or setting aside for payment, of amounts due the investor pursuant to a liquidity or dissolution event.

 

Page 33

 

 

Note G – SAFE Contracts (continued)

As of December 31, 2020, the Company had raised $290,000 through these SAFE contracts, all of which was received in 2020. These are reflected as liabilities in the accompanying balance sheet.

Note H – Convertible Notes Payable

   December 31, 2020
    
Convertible notes payable  $169,800 
Accrued interest   1,263 
Total convertible notes and accrued interest  $171,063 
      

The aggregate future maturities of convertible notes payable plus accrued interest are as follows as of December 31, 2020:

Years Ending December 31,  Amount
 2021   $50,641 
 2022    120,422 
     $171,063 

During 2020, the Company offered their investors a series of 18-month 2% convertible promissory notes, (collectively, the “Notes”). Upon conversion, these shareholders would have the same rights as the current preferred shareholders. The key events that will cause conversion of these agreements into future equity at any time between the date hereof and the respective maturity dates include:

Qualified Financing: If there is a qualified financing prior to a change in control or payment in full of these Notes, all principal together with all accrued but unpaid interest under these Notes shall automatically convert into shares of the Company’s preferred stock at the lesser of (i) a range of 80% to 85%, as defined in each individual Note, of the price per share paid by the purchasers for cash of the largest number of equity securities in the qualified financing, or (ii) the price obtained by dividing the target valuation by the Company’s fully-diluted outstanding capitalization (including these Notes and other convertible securities issued by the Company, including but not limited to: (a) SAFE contracts; (b) convertible promissory notes and other convertible debt instruments; and (c) convertible securities that have the right to convert into shares of common stock) immediately prior to the qualified financing (the “Conversion Price”). The total number of shares of stock that the holder shall be entitled to upon conversion of these Notes shall be equal to the number obtained by dividing (i) all principal and accrued but unpaid interest under such Note by (ii) the Conversion Price (the “Total Number of Shares”).

Optional Conversion : In the event that neither a qualified financing nor payment in full of these Notes has occurred on or before the maturity date, the principal and accrued but unpaid interest under the Notes shall, at the option of the holders of a majority of the principal of the outstanding Company Notes (“Majority Noteholders”), automatically convert into shares of the Company’s preferred stock at a price per share agreed by the Company and the Majority Noteholders, which price per share shall not be less than a price obtained by dividing the target valuation by the Company’s fully-diluted capitalization (assuming the conversion and exercise of all convertible and exercisable securities of the Company then outstanding). The total number of shares of capital stock issued to the holder, if any, shall be referred to as the “Non-Qualified Financing Conversion Shares”.

 

Page 34

 

 

Note H – Convertible Notes Payable (continued)

Change in Control: In the event of a change of control prior to the qualified financing, optional conversion or payment in full of the Notes, in connection with such change of control, at the option of the holder, either (i) the holder shall receive a payment equal to the accrued but unpaid interest on the Notes plus 1.5x the principal of the Notes, or (ii) the Notes shall convert into shares of preferred stock of the Company at a price obtained by dividing the target valuation by the Company’s fully-diluted outstanding capitalization (excluding the shares issuable upon conversion of the Notes) immediately prior to the change of control.

As of December 31, 2020, the Company had raised approximately $160,000 through these convertible notes with maturity dates ranging from November 11, 2021 to June 20, 2022. The Company also issued $9,800 in convertible notes payable for research and development services. Interest expense accrued at December 31, 2020 was $1,263. Since the next qualified equity issuance is contingent on factors not controllable by the Company the beneficial conversion feature is not recognized until that contingency is resolved.

Note I – Stockholder’s Deficit

Stockholder’s deficit consists of one class of common stock. The Company has authorized the issuance of 10,000,000 shares of common stock with a par value of $0.00001. At December 31, 2020, the Company had 8,333,333 common shares issued and outstanding.

Note J – Income Taxes

No provision or benefit for federal or state income taxes has been reflected for the year ended December 31, 2020 since the Company reported losses and has established a valuation allowance against the total net deferred tax asset.

Significant components of the Company’s deferred tax assets (liabilities) as of December 31, 2020 are as follows:

    
Net operating loss carry forward  $137,613 
Property and equipment   (14,979)
Valuation allowance   (122,634)
Net deferred tax asset  $—   

At December 31, 2020, the Company had federal net operating loss carryforwards of approximately $543,000. The federal net operating loss may be carried forward indefinitely but are limited to 80% of the taxable income in any one tax period. The utilization of the net operating loss carryforwards may be limited in the case of certain events including significant changes in ownership interests.  The Company’s federal and state blended tax rate was 27.32% for the year ended December 31, 2020. 

The entire balance of the deferred tax asset has been offset by a valuation allowance since there may be limitations on the amount of net operating loss carryforwards which can be used in future years, and utilization of net operating loss carryforwards cannot be sufficiently assured at December 31, 2020.

Note K – Commitments and Contingencies

Operating Leases

The Company has entered into various month-to-month operating lease agreements for office space and storage. Total rent expense was approximately $6,000 for the year ended December 31, 2020.

 

Page 35

 

 

Note K – Commitments and Contingencies (continued)

Contingencies

Certain conditions may exist as of the date the financial statements are issued, which may result in a loss to the Company but which will only be resolved when one or more future events occur or fail to occur. The Company’s management and its legal counsel assess such contingent liabilities, and such assessment inherently involves an exercise of judgment. In assessing loss contingencies related to legal proceedings that are pending against the Company or unasserted claims that may result in such proceedings, the Company’s legal counsel evaluates the perceived merits of any legal proceedings or unasserted claims as well as the perceived merits of the amount of relief sought or expected to be sought therein. If the assessment of a contingency indicates that it is probable that a material loss has been incurred and the amount of the liability can be estimated, then the estimated liability would be accrued in the Company’s financial statements. If the assessment indicates that a potentially material loss contingency is not probable, but is reasonably possible, or is probable but cannot be estimated, then the nature of the contingent liability, together with an estimate of the range of possible loss if determinable and material, would be disclosed.

COVID-19

Management has concluded that the COVID-19 outbreak in 2020 may have a significant impact on business in general, but the potential impact on the Company is not currently measurable. Due to the level of risk this virus has had on the global economy, it is at least reasonably possible that it could have an impact on the operations of the Company in the near term that could materially impact the Company’s financials. Management has not been able to measure the potential financial impact on the Company but will review commercial and federal financing options should the need arise.

Note L – Subsequent Events

The Company evaluated subsequent events and transactions for potential recognition or disclosure in the financial statements through September 9, 2021, the date the financial statements were available for issuance, and determined that the following items required disclosure.

Subsequent to the date of the balance sheet, the Company issued an additional $1,340,000 of SAFE agreements, with terms similar to those described in Note G.

 

Page 36

 

 

Part III - Exhibits

 

Exhibit Index

 

EX1A-2A Amended And Restated Certificate of Incorporation

EX1A-2B Bylaws of Apis Cor Inc.

EX1A-4. Subscription Agreement

EX1A-11. Written Expert Consent Letter of

EX1A-12. Legal Opinion of Trevor Brewer

  

 

Page 37

 

 

SIGNATURES

 

Pursuant to the requirements of Regulation A, the issuer certifies that it has reasonable grounds to believe that it meets all of the requirements for filing on Form 1-A and has duly caused this Offering Statement to be signed on its behalf by the undersigned, thereunto duly authorized, in the City of Melbourne, FL.

 

 

(Exact name of the Issuer as specified in its Charter)

Apis Cor Inc.

3060 Venture Lane #101

Melbourne, FL 32934

 

 

This Offering Statement has been signed by the following persons in the capacities and on the dates indicated.

 

 s/Anna Cheniuntai

Anna Cheniuntai, Chief Executive Officer

(Date): September 29, 2021

Location Signed: City of Melbourne, FL

 

s/Nikita Cheniuntai

Nikita Cheniuntai, Chief Technology Officer

(Date): September 29, 2021

Location Signed: City of [city]

  

 

This Offering Statement has been signed by the following Directors in the capacities and on the dates indicated.

 

s/Nikita Cheniuntai

Nikita Cheniuntai, Director

(Date): September 29, 2021

Location Signed: City of Melbourne, FL

 

s/Anna Cheniuntai

Anna Cheniuntai, Director

(Date): September 29, 2021

Location Signed: City of Melbourne, FL

 

Page 38