425 1 d252562d425.htm 425 425

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

 

FORM 8-K

 

 

CURRENT REPORT

PURSUANT TO SECTION 13 OR 15(d)

OF THE SECURITIES EXCHANGE ACT OF 1934

Date of Report (Date of earliest event reported): November 15, 2021

 

 

Decarbonization Plus Acquisition Corporation III

(Exact name of registrant as specified in its charter)

 

 

 

Delaware   001-40284   86-1888095
(State or other jurisdiction
of incorporation)
  (Commission
File Number)
  (I.R.S. Employer
Identification No.)

 

2744 Sand Hill Road, Suite 100

Menlo Park, CA

  94025
(Address of principal executive offices)   (Zip Code)

(212) 993-0076

(Registrant’s telephone number, including area code)

Not Applicable

(Former name or former address, if changed since last report)

 

 

Check the appropriate box below if the Form 8-K is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions:

 

 

Written communication pursuant to Rule 425 under the Securities Act (17 CFR 230.425)

 

 

Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12)

 

 

Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b))

 

 

Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c))

Securities registered pursuant to Section 12(b) of the Act:

 

Title of each class

 

Trading
Symbol(s)

 

Name of each exchange on
which registered

Units, each consisting of one share of Class A common stock and one-third of one warrant   DCRCU   Nasdaq Capital Market
Class A common stock, par value $0.0001 per share   DCRC   Nasdaq Capital Market
Warrants, each whole warrant exercisable for one share of Class A common stock at an exercise price of $11.50 per share   DCRCW   Nasdaq Capital Market

Indicate by check mark whether the registrant is an emerging growth company as defined in Rule 405 of the Securities Act of 1933 (§230.405 of this chapter) or Rule 12b-2 of the Securities Exchange Act of 1934 (§240.12b-2 of this chapter).

Emerging growth company     ☒

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

 

 

 


Item 7.01

Regulation FD Disclosure

As previously announced by Decarbonization Plus Acquisition Corporation III (“DCRC”), on June 15, 2021, DCRC, DCRC Merger Sub Inc., a Delaware corporation and wholly owned subsidiary of DCRC (“Merger Sub”), and Solid Power, Inc., a Colorado corporation (“Solid Power”), entered into a business combination agreement and plan of reorganization (as amended on October 12, 2021 by the First Amendment to the Business Combination Agreement, the “Business Combination Agreement”), pursuant to which Merger Sub will be merged with and into Solid Power (the “Merger,” together with the other transactions related thereto, the “Proposed Transactions”), with Solid Power surviving the Merger as a wholly owned subsidiary of DCRC (the “Surviving Corporation”).

Attached as Exhibit 99.1 to this Current Report on Form 8-K and incorporated herein by reference is an investor presentation relating to the previously announced Proposed Transactions.

Such exhibit and the information set forth therein will not be deemed to be filed for purposes of Section 18 of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), or otherwise be subject to the liabilities of that section, nor will it be deemed to be incorporated by reference in any filing under the Securities Act of 1933, as amended (the “Securities Act”), or the Exchange Act.

Important Information for Investors and Stockholders

This communication is being made in respect of the proposed transaction involving DCRC and Solid Power. A full description of the terms of the transaction is provided in the registration statement on Form S-4 (File No. 333-258681) (the “Registration Statement”) filed with the Securities and Exchange Commission (the “SEC”) by DCRC. The Registration Statement includes a prospectus with respect to the combined company’s securities to be issued in connection with the business combination and a definitive proxy statement with respect to the stockholder meeting of DCRC to vote on the business combination. Additionally, DCRC will file other relevant materials with the SEC in connection with the business combination. Copies may be obtained free of charge at the SEC’s web site at www.sec.gov. Security holders of DCRC are urged to read the proxy statement/prospectus, including all amendments and supplements thereto, and the other relevant materials when they become available before making any voting decision with respect to the proposed business combination because they will contain important information about the business combination and the parties to the business combination. The definitive proxy statement/prospectus included in the Registration Statement is being mailed to stockholders of DCRC as of the record date established for voting on the proposed business combination. Stockholders may also obtain a copy of the Registration Statement, including the proxy statement/prospectus, and other documents filed with the SEC without charge, by directing a request to: Decarbonization Plus Acquisition Corporation III, 2744 Sand Hill Road, Suite 100, Menlo Park, California 94025. The information contained on, or that may be accessed through, the websites referenced herein is not incorporated by reference into, and is not a part of, this filing.

Participants in Solicitation

DCRC and Solid Power and their respective directors and officers may be deemed participants in the solicitation of proxies of DCRC’s stockholders in connection with the proposed business combination. Security holders may obtain more detailed information regarding the names, affiliations and interests of certain of DCRC’s executive officers and directors in the solicitation by reading DCRC’s definitive proxy statement/prospectus, which is included in the Registration Statement, DCRC’s final prospectus for its initial public offering filed with the SEC on March 25, 2021, and other relevant materials filed with the SEC in connection with the business combination when they become available. Information concerning the interests of DCRC’s participants in the solicitation, which may, in some cases, be different than those of DCRC’s stockholders generally, is set forth in the proxy statement/prospectus relating to the proposed business combination.


No Offer or Solicitation

This communication does not constitute an offer to sell or the solicitation of an offer to buy any securities or constitute a solicitation of any vote or approval in respect of the potential transaction and shall not constitute an offer to sell or a solicitation of an offer to buy the securities of DCRC, Solid Power or the combined company, nor shall there be any sale of any such securities in any state or jurisdiction in which such offer, solicitation, or sale would be unlawful prior to registration or qualification under the securities laws of such state or jurisdiction. No offer of securities shall be made except by means of a prospectus meeting the requirements of the Securities Act.

Forward Looking Statements

The information herein includes “forward-looking statements” within the meaning of Section 27A of the Securities Act and Section 21E of the Exchange Act, including DCRC’s or Solid Power’s or their management teams’ expectations, hopes, beliefs, intentions or strategies regarding the future. All statements, other than statements of present or historical fact included herein, regarding DCRC’s proposed acquisition of Solid Power, DCRC’s ability to consummate the transaction, the benefits of the transaction and the combined company’s future financial performance, as well as the combined company’s strategy, future operations, estimated financial position, estimated revenues and losses, projected costs, prospects, plans and objectives of management are forward-looking statements. When used herein, the words “could,” “should,” “will,” “may,” “believe,” “anticipate,” “intend,” “estimate,” “expect,” “project,” the negative of such terms and other similar expressions are intended to identify forward-looking statements, although not all forward-looking statements contain such identifying words. These forward-looking statements are based on management’s current expectations and assumptions about future events and are based on currently available information as to the outcome and timing of future events. Except as otherwise required by applicable law, DCRC and Solid Power disclaim any duty to update any forward-looking statements, all of which are expressly qualified by the statements in this section, to reflect events or circumstances after the date hereof. DCRC and Solid Power caution you that these forward-looking statements are subject to numerous risks and uncertainties, most of which are difficult to predict and many of which are beyond the control of either DCRC or Solid Power. In addition, DCRC cautions you that the forward-looking statements contained herein are subject to the following factors: (i) the occurrence of any event, change or other circumstances that could delay the business combination or give rise to the termination of the agreements related thereto; (ii) the outcome of any legal proceedings that may be instituted against DCRC or Solid Power following announcement of the transactions; (iii) the inability to complete the business combination due to the failure to obtain approval of the stockholders of DCRC, or other conditions to closing in the transaction agreement; (iv) the risk that the proposed business combination disrupts DCRC’s or Solid Power’s current plans and operations as a result of the announcement of the transactions; (v) Solid Power’s ability to realize the anticipated benefits of the business combination, which may be affected by, among other things, competition and the ability of Solid Power to grow and manage growth profitably following the business combination; (vi) costs related to the business combination; (vii) changes in applicable laws or regulations; (viii) rollout of Solid Power’s business plan and the timing of expected business milestones, (ix) the effects of competition on Solid Power’s business, (x) supply shortages in the materials necessary for the production of Solid Power’s products, (xi) risks related to original equipment manufacturers and other partners being unable or unwilling to initiate or continue business partnerships on favorable terms, (xii) the termination or reduction of government clean energy and electric vehicle incentives, (xiii) delays in the construction and operation of production facilities, (xiv) the amount of redemption requests made by DCRC’s public stockholders, (xv) changes in domestic and foreign business, market, financial, political and legal conditions, and (xvi) the possibility that Solid Power may be adversely affected by other economic, business, and/or competitive factors. Should one or more of the risks or uncertainties described herein, or should underlying assumptions prove incorrect, actual results and plans could differ materially from those expressed in any forward-looking statements. Additional information concerning these and other factors that may impact the operations and projections discussed herein can be found in DCRC’s filings with the SEC, including DCRC’s final prospectus for its initial public offering filed with the SEC on March 25, 2021, and the Registration Statement filed in connection with the business combination. DCRC’s SEC filings are available publicly on the SEC’s website at www.sec.gov.


Item 9.01

Financial Statements and Exhibits.

 

  (d)

Exhibits. The following exhibits are filed with this Form 8-K:

 

Exhibit No.

  

Description of Exhibits

99.1    Investor Presentation.
104    Cover Page Interactive Data File (embedded within the Inline XBRL document).


SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.

 

    DECARBONIZATION PLUS ACQUISITION CORPORATION III
Date: November 15, 2021     By:  

/s/ Peter Haskopoulos

    Name:   Peter Haskopoulos
    Title:   Chief Financial Officer, Chief Accounting Officer and Secretary


A New Breed of Battery Investor Deck November 2021


Disclaimer Important Information for Investors and Stockholders This presentation (this “Presentation”) is being made in respect of the proposed transaction involving Decarbonization Plus Acquisition Corporation III (“DCRC”) and Solid Power, Inc. (“Solid Power”). A full description of the terms of the transaction is provided in the registration statement on Form S-4 (File No. 333-258681) (the “Registration Statement”) filed with the Securities and Exchange Commission (the “SEC”) by DCRC. The Registration Statement includes a prospectus with respect to the combined company’s securities to be issued in connection with the business combination and a definitive proxy statement with respect to the stockholder meeting of DCRC to vote on the business combination. Additionally, DCRC will file other relevant materials with the SEC in connection with the business combination. Copies may be obtained free of charge at the SEC’s website at www.sec.gov. Security holders of DCRC are urged to read the proxy statement/prospectus, including all amendments and supplements thereto, and the other relevant materials when they become available before making any voting decision with respect to the proposed business combination because they will contain important information about the business combination and the parties to the business combination. The definitive proxy statement/prospectus included in the Registration Statement is being mailed to stockholders of DCRC as of the record date for voting on the proposed business combination. Stockholders may also obtain a copy of the Registration Statement, including the proxy statement/prospectus, and other documents filed with the SEC without charge, by directing a request to: Decarbonization Plus Acquisition Corporation III, 2744 Sand Hill Road, Suite 100, Menlo Park, California 94025. The information contained on, or that may be accessed through, the websites referenced herein is not incorporated by reference into, and is not a part of, this Presentation. Participants in the Solicitation DCRC and Solid Power and their respective directors and officers may be deemed participants in the solicitation of proxies of DCRC’s stockholders in connection with the proposed business combination. Security holders may obtain more detailed information regarding the names, affiliations and interests of certain of DCRC’s executive officers and directors in the solicitation by reading DCRC’s definitive proxy statement/prospectus, which is included in the Registration Statement, DCRC’s final prospectus for its initial public offering filed with the SEC on March 25, 2021, and other relevant materials filed with the SEC in connection with the business combination when they become available. Information concerning the interests of DCRC’s participants in the solicitation, which may, in some cases, be different than those of DCRC’s stockholders generally, is set forth in the definitive proxy statement/prospectus relating to the proposed business combination. No Offer or Solicitation This Presentation does not constitute an offer to sell or the solicitation of an offer to buy any securities or constitute a solicitation of any vote or approval in respect of the potential transaction and shall not constitute an offer to sell or a solicitation of an offer to buy the securities of DCRC, Solid Power or the combined company, nor shall there be any sale of any such securities in any state or jurisdiction in which such offer, solicitation, or sale would be unlawful prior to registration or qualification under the securities laws of such state or jurisdiction. No offer of securities shall be made except by means of a prospectus meeting the requirements of the Securities Act. Forward –Looking Statements This presentation together with oral statements made in connection herewith include “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended, including DCRC’s or Solid Power’s or their management teams’ expectations, hopes, beliefs, intentions or strategies regarding the future. All statements, other than statements of present or historical fact included herein, regarding DCRC’s proposed acquisition of Solid Power, DCRC’s ability to consummate the transaction, the benefits of the transaction and the combined company’s future financial performance, as well as the combined company’s strategy, future operations, estimated financial position, estimated revenues and losses, projected costs, prospects, plans and objectives of management are forward-looking statements. When used herein, the words “could,” “should,” “will,” “may,” “believe,” “anticipate,” “intend,” “estimate,” “expect,” “project,” the negative of such terms and other similar expressions are intended to identify forward-looking statements, although not all forward-looking statements contain such identifying words. These forward-looking statements are based on management’s current expectations and assumptions about future events and are based on currently available information as to the outcome and timing of future events. Except as otherwise required by applicable law, DCRC and Solid Power disclaim any duty to update any forward-looking statements, all of which are expressly qualified by the statements in this section, to reflect events or circumstances after the date hereof. All forward-looking statements speak only as of the date of this Presentation. DCRC and Solid Power caution you that these forward-looking statements are subject to numerous risks and uncertainties, most of which are difficult to predict and many of which are beyond the control of either DCRC or Solid Power. In addition, DCRC cautions you that the forward-looking statements contained herein are subject to the following factors: (i) the occurrence of any event, change or other circumstances that could delay the business combination or give rise to the termination of the agreements related thereto; (ii) the outcome of any legal proceedings that may be instituted against DCRC or Solid Power following announcement of the transactions; (iii) the inability to complete the business combination due to the failure to obtain approval of the stockholders of DCRC, or other conditions to closing in the transaction agreement; (iv) the risk that the proposed business combination disrupts DCRC’s or Solid Power’s current plans and operations as a result of the announcement of the transactions; (v) Solid Power’s ability to realize the anticipated benefits of the business combination, which may be affected by, among other things, competition and the ability of Solid Power to grow and manage growth profitably following the business combination; (vi) costs related to the business combination; (vii) changes in applicable laws or regulations; (viii) rollout of Solid Power’s business plan and the timing of expected business milestones, (ix) the effects of competition on Solid Power’s business, (x) supply shortages in the materials necessary for the production of Solid Power’s products, (xi) risks related to original equipment manufacturers and other partners being unable or unwilling to initiate or continue business partnerships on favorable terms, (xii) the termination or reduction of government clean energy and electric vehicle incentives, (xiii) delays in the construction and operation of production facilities, (xiv) the amount of redemption requests made by DCRC’s public stockholders, (xv) changes in domestic and foreign business, market, financial, political and legal conditions, and (xvi) the possibility that Solid Power may be adversely affected by other economic, business, and/or competitive factors. Should one or more of the risks or uncertainties described herein, or should underlying assumptions prove incorrect, actual results and plans could differ materially from those expressed in any forward-looking statements. Additional information concerning these and other factors that may impact the operations and projections discussed herein can be found in DCRC’s filings with the SEC, including DCRC’s final prospectus for its initial public offering filed with the SEC on March 25, 2021, and the Registration Statement filed in connection with the business combination. DCRC’s SEC filings are available publicly on the SEC’s website at www.sec.gov. 2


Disclaimer (cont’d) U se of Projections T his Presentation contains projected financial information w ith respect to Solid Pow er. Such projected financial information constitutes forw ard-looking information, is for illustrative purposes only and should not be relied upon as necessarily being indicative of future results. The assumptions and estimates underly ing such projected financial information are inherently uncertain and are subject to a w ide v ariety of significant business, economic, competitive and other risks and uncertainties that could cause actual results to differ materially from those contained in the projected financial information. See “Forw ard-Looking Statements” section above. Actual results may differ materially from the results contemplated by the projected financial information contained in this Presentation, and the inclusion of such information in this Presentatio n should not be regarded as a representation by any person that the results reflected in such information w ill be achiev ed. Neither DCRC’s nor Solid Pow er’s independent auditors have audited, rev iew ed, compiled or performed any procedures w ith respect to the projections for the purpose of their inclusion in this Presentation, and accordingly, neither of them expressed an opinion or provided any other form of assurance w ith respect thereto for the purpose of this Presentation. Fi nancial Information; Non-GAAP Financial Measures T he financial information and data contained in this Presentation is unaudited and does not conform to Regulation S-X promulgated under the Securities Act. Accordingly, such information and data may not be included in, may be adjusted in or may be presented differently in, the Registration Statement or the corresponding proxy statement/prospectus. Some of the financial information and data contained in this Presentation, such as EBITDA, EBITDA Margin, and Free Cash Flow , hav e not been prepared in accordance w ith United States generally accepted accounting principles (“GAAP”). Due to the forw ard -looking nature of these projections, specific quantifications of the amounts that w ould be required to reconcile such projections to GAAP measures are not av ailable, and Solid Pow er’s management believes that it is not feasible to provide accurate forecasted non-GAAP reconciliations. DCRC and Solid Pow er believe that these non-GAAP financial measures prov ide useful information to management and investors regarding certain financial and business trends relating to Solid Pow e r’s financial condition and results of operations. DCRC and Solid Pow er believe that the use of these non -GAAP financial measures prov ides an additional tool for inv estors to use in ev aluating projected operating results and trends in and in comp aring Solid Pow er’s financial measures w ith other similar companies, many of w hich present similar non-GAAP financial measures to inv estors. Management does not consider these non-GAAP measures in isolation or as an alternative to financial measures determined in accordance w ith GAAP. The principal limitation of these non-GAAP financial measures is that they exclude significant expenses and income that are required by GAAP to be recorded in Solid Pow er’s financial statements. In addition, they are subject to inherent limitations as they reflect the exercise of judgments by management about w hich expenses and income are excluded or included in determining these non-GAAP financial measures. T rademarks and Trade Names Solid Pow er and DCRC ow n or have rights to v arious trademarks, serv ice marks and trade names that they use in connection w ith the operation of their respective businesses. This Presentation also contains trademarks, service marks and trade names of third parties, w hich are the property of their respective ow ners. The use or display of third parties’ trademarks, s ervice marks, trade names or products in this Presentation is not intended to, and does not imply , a relationship w ith Solid Pow er or DCRC, or an endorsement or sponsorship by or of Solid Pow er or DCRC. Solely for convenience, the trademarks, serv ice marks and trade names referred to in this Presentation may appear w ith the ®, T M or SM symbols, but such references are not intended to indicate, in any w ay, that Solid Pow er or DCRC w ill not assert, to the fullest extent under applicable law , their rights or the right of the applicable licensor to these trademarks, serv ice marks and trade names. I n dustry and Market Data Although all information and opinions and or other information expressed in this Presentation, including market data and othe r statistical information, w ere obtained from sources believed to be reliable and are included in good faith, Solid Pow er and DCRC hav e not independently v erified the information and make no representation or w arranty, express or implied, as to it s accuracy or completeness. Some data is also based on the good faith estimates of Solid Pow er and DCRC, w hich are deriv ed from their respective rev iew s of internal sources as w ell as the independent sources described abov e. This Presentation contains preliminary information only, is subject to change at any time and is not, and should not be assumed to be, complete or to constitute all the information necessary to adequately make an informed decision regarding y our engagement w it h Solid Pow er and DCRC. Nothing herein should be construed as legal, financial, tax or other advice. You should consult y our ow n adv isers concerning any legal, financial, tax or other considerations concerning the opportunity described h erein. The general explanations included in this Presentation cannot address, and are not intended to address, y our specific investment objectiv es, financial situations or financial needs. 3


Solid Power is the Leader in Solid-State Battery Technology Compelling Investment Story Solid Product Solid Business Model 1 $300bn+ Market Multiple Shots on Goal – OEMs committed to EV growth – Cell manufacturing through licensing – Market has room for multiple winners – Electrolyte sales to partners Superior Performance vs. Li-ion Capital Light Business Model – Longer range, extended life and improv ed safety – No need to construct capital intensiv e gigafactories Proven Manufacturing Process Clear Path to Lowering Battery Costs – Pilot production facility operational since 2019 – Ability to reduce most expensiv e component of EVs – Validation from OEMs, commercialization partners – Simpler design, higher energy density 2 Fully Funded Business Plan Validation from Industry Leaders – Through v ehicle SOP (2026E) – JDAs and inv estment from Ford and BMW – Partnership and inv estment from Tier-1 Li-ion producer SK Innov ation The only pure play solid-state battery public investment opportunity 1. Based upon BNEF’s estimates of global electric and non-electric vehicle production in 2035. Battery opportunity assumes 70 kWh pack sizes and $85 / kWh. 2. Assumes no redemption by DCRC’s public stockholders. Based on current financial projections. 4 4


Global EV Penetration as % of Sales The Electric Vehicle Transition is Underway In coming years, the EV market is expected to grow significantly 1 Annual Global Passenger EV Sales EV Battery Total Addressable Market (Millions of Vehicles Sold) ($ in Billions) 50 60% 45 100% EV adoption 50% 40 $590bn TAM 35 40% 30 25 30% 2035 20 $305bn TAM 20% 15 10 10% 5 0 0% 2020 2025 2030 2035 Source: Bloomberg NEF. 1. Based upon BNEF’s estimates of global electric and non-electric vehicle production in 2035. Battery opportunity assumes 70 kWh pack sizes and $85 / kWh. 5 5


Key Challenges of Current Lithium-Ion Technology 2 3 1 4 Limited 2 Cells Must Be Kept Cool Elevated Safety Risk Expensive Pack Systems Drive Range Complex battery packs Lithium-ion battery On average, current EV Liquid electrolyte used in technology does not batteries are estimated to traditional lithium-ion represent the single most provide enough energy last 8 years, almost 4 years battery cells is the enabler expensive part of an 3 density to support shorter than the car of thermal runaway and electric vehicle 1 extended drives before lifespan fire risk requiring recharging 6 1. Company estimate. 2. Image source: Cherokee County Fire Department. 3. Bloomberg. The battery pack is the single most expensive part of an electric v ehicle, accounting for about 30 percent of the total cost to consumers.” 6


Solid Power’s All-Solid-State Platform is a Revolutionary Advancement A liquid and gel-free battery cell provides unique advantages over lithium-ion and other next-gen solutions Range Battery Life Safety Next Gen Cost Solid electrolyte Non-volatile, 100% Enables next gen Lower material and 1 482 vs 266 miles enables high solid-state cathodes pack system costs temperature stability Result of energy density, Could allow for the High-energy electrode Removal of flammable safety improvements, pack Potential to remove removal of expensive and materials deliver range liquids and gels greatly improvements and ability extensively engineered expensive nickel and cobalt comparable to ICE vehicles reduces risk of battery fires to utilize Lithium-ion battery pack cooling equipment Note: Solid Pow er cell performance metrics are initial commercialization design targets for Lithium Metal EV Cell. 1. Comparison based on a 77 kWh lithium-ion pack with cylindrical cells (i.e. Tesla Model 3 Pack) with a system volume of 329 L. Solid Pow er mileage assumes a constant 329 L system volume delivering 138 kWh w ith a pack mass of 481 kg 7 utilizing Lithium Metal EV Cell design. 7


All-Solid-State vs. Lithium-Ion vs. Hybrid Solutions All-Solid-State expected to deliver significant benefits over current and other emerging solutions Traditional 1 2 All-Solid-State Lithium-Ion Hybrid (Liquid + Solid) High Energy X Superior Safety X X Long Calendar Life X ? Low Cost ? ? All-Solid-State also enables future low -cost, high-energy cathodes not suitable in liquid or liquid/gel systems 1. Company estimates based on today's commercially available cells. 2. Company estimates based on hybrid cell developments. 8


Two Product Groups Sulfide Solid Electrolytes Energy Dense Pouch Cells ▪ Proprietary sulfide-based solid ▪ Proprietary design and production electrolytes tuned for high of industry leading all-solid-state cells conductivity and lithium metal stability ▪ Intend to utilize top tier cell ▪ Best all-around performing solid manufacturers as licensed electrolyte materials commercialization partners ▪ Low-cost and scalable▪ Low-cost and scalable + ▪ Capital light with attractive margins▪ Third-party produced cells expected to be sold to Ford and BMW ▪ Can be sold to entire universe and compete for other Auto OEMs of companies pursuing their own sulfide-based all-solid-state batteries Potential Customers Potential Customers Other OEMs and Tier-1s Long-term strategy: R&D and manufacturing Long-term strategy: R&D and licensing 9


One Flexible All-Solid-State Platform Solid Power’s solid electrolyte can accommodate existing and prospective cathode and anode materials Flexible platform allows use of alternative anode + cathode materials to suit specific performance requirements Core Technology: Solid Electrolyte Unique variants tuned as electrolyte, Silicon Based Anodes catholyte and anolyte products ▪ High charge rates and lower temperature capability Lithium Metal Anodes ▪ High energy Sol id A nolyte A node High-Content Silicon Ultra-Thin Lithium Metal Solid Electroly te Sol id El ectrolyte Intercalation-Type Cathodes Solid Electroly te ▪ Industry-standard and commercially mature Cathode NM C 811 NM C 811 Sol id Conversion-Type Cathodes Catholyte ▪ Low cost and high specific energy Electrolyte advancements through R&D are expected to benefit all anode and cathode chemistries 10


Path to Leadership in Electrolyte Supply and All-Solid-State Cell Design Unique model creates dual path to initial commercialization ▪ Electrolyte produced to feed pilot cell line▪ Internal production of prototype cells Today ▪ Electrolyte production scaled to feed 100 Ah cell line▪ Internal production of 100 Ah Silicon EV Cells 2022 ▪ External production of 100 Ah Silicon EV Cells ▪ Electrolyte production scaled to feed internal and 2024 commercial partner 100 Ah cell production ▪ Internal production of 100 Ah Lithium Metal EV Cells ▪ Endeavor to be world leader in sulfide electrolytes ▪ External production of all EV Cells supplying all sulfide-based solid-state battery 2026+ platforms▪ Continued internal R&D and prototype production 11


Electrolyte Production is Capital-Light Transferring cell production to commercial partners allows Solid Power to focus on core strengths and lower capex needs 4 Capex per GWh of Production Capacity Cell Production Capacity By Manufacturer Fully Commissioned Under Construction Announced 800 2 $88.4 million Global Capacity (GWh) 660 700 ~19x more capital Fully Commissioned 676 1 intensive Under Construction 962 600 Announced 1,948 Total 3,586 500 400 257 300 226 168 165 200 61 100 1 $4.6 million 0 Electrolyte Materials Cell Manufacturing W ell capitalized players have developed 3 M anufacturing cells in- hous e w ould require ~$ 6 .5bn of additional s ignificant s cale and expertis e capital to deliver on Solid Pow er’ s 2 02 8 production forecast Com petition is expected to be fierce th 1. Assumes 80 GWh of production equivalent sulfide-based solid electrolyte. 2. Ford and SK Innovation’s September 27 announcement of $11.4bn investment for 129 GWh production capacity. 3. Assumes $88.4 million x 80 GWh less $593 million of pro forma net cash assuming no redemptions. 4. Source: Bloomberg NEF. 12 GWh


Solid Power Product Roadmap Sustaining a product roadmap with continuous performance improvements across three unique chemistries 390 Wh/ kg, 930 Wh / L 1 1,000+ cycle life 440 Wh/ kg, 930 Wh / L 1 <15 min charge (10 → 90%) 1 1,000+ cycle life 1 Silicon EV Cell <20 min charge (10 → 90%) A node Current 560 Wh/ kg, 785 Wh / L Col l ector Lithium M etal EV Cell 1 1,000+ cycle life Sol id A node High-Content Silicon A nolyte 1 <30 min charge (10 → 90%) Ultra-Thin Lithium Metal Separator Solid Electroly te Convers ion Reaction Cell Solid Electroly te Ultra-Thin Lithium Metal Sol id Cathode NM C 811 Catholyte Solid Electroly te Sol id Catholyte NM C 811 Sol id Catholyte Next Gen. Cathode Current Col l ector Multi-product roadmap specifically geared to satisfy Auto OEM objectives of early and sustained success Note: Lithium metal anode portrayed in the fully-charged state. Solid Power cell performance metrics are initial commercialization design targets.1. Solid Pow er estimates. 13


Nearly Identical Production Process to Lithium-Ion Solid Power is positioned to bring superior cells to market at scale through compatibility with lithium-ion processes Solid Power utilizes industry standard lithium- ion production processes and equipment Slurry Slot Die Drying Electrode Calendaring / Mix Coating Slitting Lamination ▪ Substantially de-risks commercialization Lithium-ion process steps removed in ▪ Allows for rapid technology transfer to solid-state commercialization partners production ▪ Existing production lines can be transitioned as market demand grows (est. at 10% of cost Stamping Stacking Consolidation Packaging Filling of new plant) Weld ▪ Minimal historical and future capex requirements to prove commercialization Existing lithium-ion production infrastructure accommodates sulfide-based solid electrolytes Pre-Formation Aging Degassing Formation Final Storage Characterization and QC De-risks commercialization and allows for rapid tech transfer to future commercialization partners Source: Adapted from Bloomberg NEF. 14 14 Electrode Conditioning Assembly manufacturing


Real Results on the Path to Commercialization Rapid performance and manufacturing achievements 100 Ah 2022 2 2024 20 Ah 2 Ah 2020 0.2 Ah 2020 2019 EV Cell Line Under Construction 1-Layer, 5 x 10 cm Cell 10-Layer, 5 x 10 cm Cell 22-Layer, 9 x 20 cm Cell Cell Production Expected in 2022 1 Independently tested by Auto OEMs, top tier battery manufacturers and material suppliers Note: Lithium Metal EV Cell pouches show n for 0.2 Ah, 2 Ah, and 20 Ah. Each cell layer refers to the number of double-sided cathodes. 1. Independent testing completed for 0.2 Ah and 2 Ah cells to date with 20 Ah independent testing pending. 2. Cell rendering shown for 100Ah cell. 100 Ah Silicon EV Cell anticipated in 2022. 100 Ah Lithium Metal EV cell anticipated in 2024. 15


Validation from Automotive OEM Partners Ford participated in Solid Power’s Series A funding in 2018, providing plan validation and capital Expanded JDAs announced in May 2021 Developing 100Ah aut omot ive cells for qualificat ion t est ing and vehicle int egrat ion via BMW and Ford Relationship dating back to 2016 conducting all-solid-state battery research and development Recent JDAs represent shift from collaborative R&D to vehicle integration programs Source: Company press releases (BMW) (Ford). 16


Pathway to Vehicle Start-of-Production (“SOP”) Sulfide-based solid electrolyte, Silicon EV Cell and Lithium Metal EV Cell development timelines Commercialization Partner Pre A-Sample A-Sample B-Sample C-Sample D-Sample 2020 2021 2022 2023 2024 2025 2026 2027 Product Sulfide-Based Solid Electrolyte Refine Product Mass Production Silicon EV Cell Cell: 2 Ah- 20 Ah (proof of concept) Cell: 100 Ah (concept validation) Design Validation Vehicle SOP Commercialization Partner Execute Production Validation Build Lithium Metal EV Cell Cell: 2 Ah- 20 Ah (proof of concept) Cell: 100 Ah (concept validation) Design Validation Vehicle Execute Production Validation Build Commercialization Partner SOP 17


Path to Market – Upcoming Milestones 1 2 20 Ah Silicon EV Cells produced via MWh production ✓ 2 Ah Silicon EV Cells produced via MWh production line 2021 line 3 4 5 6 2 Ah Silicon EV 20 Ah Silicon EV 100 Ah EV cell Electrolyte Cells delivered Cells delivered pilot manufacturing produced at to auto partners to auto partners line installed 2,500 kg/month 2022 8 9 10 7 Formal entrance Increase 100 Ah 100 Ah Silicon EV 100 Ah EV cell into automotive Silicon EV Cell Cells delivered to pilot manufacturing qualification with 100 Ah production to 300 automotive partners line operational Silicon EV Cell cells/week 11 12 100 Ah Silicon EV Cell concept 100 Ah Silicon EV Cell validation completed 2023 design validation begins by automotive partners 18 18


Solid Power is the Leader in Solid-State Battery Technology Compelling Investment Story Solid Product Solid Business Model 1 $300bn+ Market Multiple Shots on Goal – OEMs committed to EV growth – Cell manufacturing through licensing – Market has room for multiple winners – Electrolyte sales to partners Superior Performance vs. Li-ion Capital Light Business Model – Longer range, extended life and improv ed safety – No need to construct capital intensiv e gigafactories Proven Manufacturing Process Clear Path to Lowering Battery Costs – Pilot production facility operational since 2019 – Ability to reduce most expensiv e component of EVs – Validation from OEMs, commercialization partners – Simpler design, higher energy density 2 Fully Funded Business Plan Validation from Industry Leaders – Through v ehicle SOP (2026E) – JDAs and inv estment from Ford and BMW – Partnership and inv estment from Tier-1 Li-ion producer SK Innov ation The only pure play solid-state battery public investment opportunity 1. Based upon BNEF’s estimates of global electric and non-electric vehicle production in 2035. Battery opportunity assumes 70 kWh pack sizes and $85 / kWh. 2. Assumes no redemption by DCRC’s public stockholders. Based on current financial projections. 19 19


Thank You 20