Summary of Significant Accounting Policies (Policies)	12 Months Ended
Dec. 31, 2024
Accounting Policies [Abstract]
Basis of Accounting and Presentation	Basis of Accounting and Presentation The accompanying consolidated financial statements were prepared on the accrual basis of accounting in accordance with U.S. generally accepted accounting principles (“U.S. GAAP”).
Reclassifications	Reclassifications Software Implementation Costs During the first quarter of 2024, the Company reclassified capitalized software costs recorded as Property, plant and equipment, net to Intangible assets, net on the condensed consolidated balance sheets. The reclassification was recorded retrospectively and resulted in a $4.0 million increase to Intangible assets, net at December 31, 2023, with a corresponding decrease in the same amount to Property, plant and equipment, net. These reclassifications did not impact the Company’s operating income (loss), net income (loss), earnings (loss) per share, or statements of cash flows for any current or historical periods. Brazil Value-Added Tax Benefit Revenue in 2024 and 2023, excludes a Brazil value-added tax benefit, Imposto sobre Circulação de Mercadorias e Servicos (“ICMS”), of $11.8 million and $23.2 million, respectively that has been included in cost of product and service revenue for these periods. For the year ended December 31, 2022, an ICMS benefit of $12.3 million was included in revenues. This reclassification had no impact on the Company’s gross profit, income (loss) from operations, net income or income (loss) per common share in the current period. This reclassification also did not impact the condensed consolidated balance sheets or condensed consolidated statements of cash flows.
Principles of Consolidation	Principles of Consolidation The consolidated financial statements include the accounts of Array Technologies, Inc. and its subsidiaries. All intercompany accounts and transactions have been eliminated upon consolidation.
Use of Estimates	Use of Estimates The preparation of financial statements in conformity with U.S. GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities, the disclosure of contingent assets and liabilities and the reported amounts of revenues and expenses during the reporting period. Although management believes its estimates are reasonable, actual results could differ from those estimates.
Foreign Currency Translation	Foreign Currency Translation The Company’s foreign subsidiaries have functional currencies that are different than our reporting currency. When translating balances from the functional currency to the reporting currency, assets and liabilities are translated into U.S. dollars at period end exchange rates, retained earnings is translated at historical rates, and income, expenses, and cash flow items are translated at average exchange rates prevailing during the period. Translation adjustments for these subsidiaries are accumulated within accumulated other comprehensive income. In situations when a foreign subsidiary has a local currency that is different than the functional currency, monetary assets and liabilities are translated into the functional currency at the period end exchange rates, and non-monetary assets and the related income statement effects are translated into the functional currency using historical rates. Gains and losses that result from remeasurement from a local currency to the functional currency are included in earnings.
Cash and Cash Equivalents and Restricted Cash	Cash and Cash Equivalents and Restricted Cash The Company considers all highly liquid investments purchased with an original maturity of three months or less to be cash equivalents. We regularly maintain cash balances that exceed insured amounts, but we have experienced no losses associated with these amounts to date. At December 31, 2024, restricted cash represents cash deposited with a financial institution by one of our foreign subsidiaries that was restricted for the issuance of certain surety bonds.
Accounts Receivable	Accounts Receivable The Company’s accounts receivable are due primarily from solar contractors across the U.S. and internationally. Credit is extended in the normal course of business based on evaluation of a customer’s financial condition and, generally, collateral is not required. Trade receivables consist of uncollateralized customer obligations due under normal trade terms requiring payment within 30 to 60 days of the invoice date. Management regularly reviews outstanding accounts receivable and provides for estimated credit losses through an estimate of expected credit losses valuation account. The allowance for credit losses is a valuation account that is deducted from a financial asset’s amortized cost to present the net amount we expect to collect from the asset. We estimate allowances for credit losses using relevant available information from both internal and external sources. We monitor the estimated credit losses associated with our trade accounts receivable and unbilled accounts receivable based primarily on our collection history and the delinquency status of amounts owed to us, which we determine based on the aging of such receivables. In evaluating the level of established reserves, management makes judgments regarding the customers’ ability to make required payments, economic events, and other factors. As the financial conditions of these customers change, circumstances develop, or additional information becomes available, adjustments to the valuation account may be required. When deemed uncollectible, the receivable is charged against the valuation account for credit losses or directly written off. Unbilled receivables represent temporary timing differences between shipments made and billing milestones achieved and are recorded in the accounts receivable balances. Such amounts have not been billed due to pending commercial criteria such as billing on a specified date of the month or upon completion of mega-watt deliveries. Unbilled receivables are invoiced once the underlying commercial criteria have been met and we expect payment within 30 to 60 days.
Inventories	Inventories Inventories consist of raw materials and finished goods and are stated at the lower of cost or estimated net realizable value using primarily the moving average cost method that approximates the FIFO method. Provisions are made to reduce excess or obsolete inventories to their estimated net realizable values.
Property, Plant and Equipment	Property, Plant and Equipment Property, plant and equipment are recorded at cost, net of accumulated depreciation and amortization. Improvements, betterments and replacements which extend the life of an asset are capitalized. Depreciation and amortization is computed using the straight-line method over the estimated useful lives of the respective assets. Repair and maintenance costs are expensed as incurred. A gain or loss on the sale of property, plant and equipment is calculated as the difference between the cost of the asset disposed of, net of depreciation, and net sales proceeds received. A gain or loss on an asset disposal is recognized in the period that the sale occurs.
Leases	Leases Operating lease arrangements are comprised primarily of real estate and equipment agreements. The Company determines if an arrangement contains a lease at inception based on whether it conveys the right to control the use of an identified asset in exchange for consideration. Lease right-of-use assets (“ROU assets”) and associated lease liabilities are recognized at the commencement date of the lease based on the present value of lease payments over the lease term. ROU assets represent our right to use an underlying asset for the lease term and lease liabilities represent our obligation to make lease payments arising from the lease. Certain lease agreements may include one or more options to extend or terminate a lease. Lease terms are inclusive of these options if it is reasonably certain that the Company will exercise such options. ROU assets also include any initial direct costs and prepayments less lease incentives. As most of our leases do not provide an implicit rate, we generally use our incremental borrowing rate based on the estimated rate of interest for collateralized borrowing over a similar term of the lease payments at commencement date. Lease expense is recognized on a straight-line basis over the lease term. ROU assets and the corresponding operating lease liabilities are included in other assets and other liabilities in our consolidated balance sheets. Finance leases are included in property and equipment, other current liabilities, and other long-term liabilities in our consolidated balance sheets.
Long-Lived Assets	Long-Lived Assets In testing long-lived assets and goodwill for impairment, the Company first tests its long-lived assets for impairment, and then tests the goodwill of a reporting unit that includes the long-lived assets covered under the long-lived asset test for impairment. If an asset group includes only a portion of a reporting unit, the carrying amount of goodwill is not included in the asset group. The carrying values are adjusted, if necessary, for the result of each impairment test prior to performing the next test. When events, circumstances or operating results indicate that the carrying values of long-lived assets might not be recoverable through future operations, the Company prepares projections of the undiscounted future cash flows expected to be generated from the underlying asset group and the cash flows resulting from the asset groupings eventual disposition. If the projections indicate that the underlying asset grouping is not expected to be recoverable, the estimated fair value of the asset group is determined. An impairment loss is recognized based on the difference between the carrying value of the asset group and its estimated fair value. The loss is allocated to the long-lived assets of the group on pro rata basis using the relative carrying amounts of the asset groups long-lived assets.
Goodwill and Indefinite-Lived Intangible Asset	Goodwill and Indefinite-Lived Intangible Asset Goodwill represents the excess of the consideration transferred over the estimated fair value of assets acquired and liabilities assumed in a business combination. Intangible assets are measured at their respective fair values as of the acquisition date and may be subject to adjustment within the measurement period, which may be up to one year from the acquisition date. The Company does not amortize goodwill but instead tests goodwill for impairment annually, or more frequently if events or changes in circumstances indicate that it is more likely than not that the asset is impaired. Such triggering events potentially warranting an annual or interim goodwill impairment assessment include, among other factors, declines in historical or projected revenue, operating income or cash flows, and sustained decreases in the Company’s stock price or market capitalization. Goodwill is assessed for impairment using either a qualitative assessment or quantitative approach to determine whether it is more likely than not that the fair value of the reporting unit is less than the carrying amount. The qualitative assessment evaluates factors including macroeconomic conditions, industry-specific and company-specific considerations, legal and regulatory environments, and historical performance. If the Company cannot determine if it is more likely than not that the fair value of a reporting unit is greater than its carrying value, a quantitative assessment is performed. The quantitative approach compares the estimated fair value of the reporting unit to its carrying amount, including goodwill. Impairment is indicated if the estimated fair value or the reporting unit is less than the carrying amount of the reporting unit, and an impairment charge is recognized for the differential. When determining the fair value of a reporting unit using the quantitative approach, we determine the fair value of the reporting unit using an income approach based on discounted cash flows. The fair value determined under the income approach is then compared to guideline publicly-traded companies (“GPC”) market place EBITDA multiples to corroborate the fair value of the reporting unit determined under the income approach. During the year ended December 31, 2024, the Company identified certain indicators of impairment on various dates, and as a result, performed goodwill impairment tests, which resulted in impairments of goodwill totaling $236.0 million. See Note 7 – Goodwill, Long-Lived Assets, and Other Intangible Assets for additional information. There was no impairment of goodwill for the years ended December 31, 2023 and 2022. The Company has one indefinite-lived intangible asset for a Trade name it acquired as part of a past acquisition associated with Legacy Array. The Company performs an annual impairment test on its Trade name indefinite-lived intangible asset, utilizing a qualitative or quantitative impairment analysis during the fourth quarter of each year. There were no indicators of impairment associated with this Trade name,
Amortizable and Other Intangible Assets	Amortizable and Other Intangible Assets The Company amortizes identifiable finite lived intangible assets consisting of developed technology, customer relationships, contractual backlog and the STI trade name on a straight-line basis over the assets’ estimated useful lives. The basis of amortization approximates the pattern in which the assets are utilized, over their estimated useful lives.
Other Intangible Assets	The Array Technologies trade name has been determined to have an indefinite life and, therefore, is not amortized but is subject to an annual impairment test or at any other time when impairment indicators exist.
Debt Discount and Issuance Costs	Debt Discount and Issuance Costs Debt discount and issuance costs incurred to issue debt are deferred and amortized using the effective interest method as a component of interest expense over the life of the related debt agreement.
Revenue Recognition and Contract Balances	Revenue Recognition In accordance with ASC 606, the Company recognizes revenues from the sale of solar tracking systems, parts, installation services, extended warranties on solar tracker system components and software licenses along with associated maintenance and support. The Company determines its revenue recognition through the following steps (i) identification of the contract or contracts with a customer, (ii) identification of the performance obligations within the contract, (iii) determination of the transaction price, (iv) allocation of the transaction price to the performance obligations within the contract, and (v) recognition of revenue when, or as the performance obligation has been satisfied. In assessing the recognition of revenue, the Company also evaluates whether two or more contracts should be combined and accounted for as one contract and if the combined or single contract should be accounted for as multiple performance obligations which could change the amount of revenue and profit (loss) recorded in a period. Further, the Company assesses whether control of the product or services promised under the contract is transferred to the customer at a point in time or over time. Performance Obligations The Company’s contracts for specific solar tracker system projects with customers are predominantly accounted for as a single performance obligation, because the Company is integrating the solar tracking system components and related services as part of a single project. The Company’s performance creates and enhances an asset that the customer controls as the Company performs under the contract, which is principally as tracker system components are delivered to the designated project site. The Company sources the component parts from third party manufacturers, it obtains control and receives title of such parts before transferring them to the customer because the Company is responsible for fulfillment to its customer. The Company’s engineering services and professional services are interdependent with the component parts whereby the parts form an input into a combined output for which it is the principal, and the Company could redirect the parts before they are transferred to the customer if needed. The customer owns the work-in-process over the course of the project and the Company’s performance enhances a customer-controlled asset, resulting in the recognition of the performance obligation over time. In contracts with a single performance obligation, the Company’s obligation is satisfied over-time as control is transferred to the customer by measuring the progress toward complete satisfaction of the performance obligation using an input (i.e., the “cost-to-cost”) method. Under the cost-to-cost measure of progress, the extent of progress towards completion is measured based on the ratio of costs incurred to date to the total estimated costs at completion of the performance obligation. The costs of materials and hardware components are recognized as incurred, which is typically upon delivery to the customer site or upon transfer of control while in transit. For contracts with customers that result in multiple performance obligations, the Company allocates the contract’s transaction price to each performance obligation using its best estimate of the standalone selling price of each distinct good or service in the contract. These contracts include contracts for the sale of components, contracts with installation services, solar tracker systems sold with an extended warranty, and contracts that include the sale of software and maintenance. For all years presented, the transaction price associated with extended warranties and the sale of software and maintenance was not material. The Company generally uses the expected cost-plus margin approach to estimate the standalone selling price of each performance obligation. For contracts related to the sale of components as opposed to contracts to provide an integrated solar tracker project, the Company’s obligation to the customer is to deliver components that are used by the customer to create a tracker system and does not include engineering or other professional services or the obligation to provide such services in the future. Under these arrangements, each component is a distinct performance obligation, and often the components are delivered in batches at different points in time. The Company estimates the standalone selling price (“SSP”) of each component performance obligation based on a cost-plus margin approach. Revenue allocated to a component is recognized at the point in time that control of the component transfers to the customer, which is usually upon delivery to the customer’s site. Contracts are often modified through change orders to account for changes in specifications or design, manner of performance, equipment, materials, scope of work, and/or the period of completion of the project. Although the Company evaluates each change order to determine whether such modification creates a separate performance obligation, the majority of change orders are for goods or services that are not distinct within the context of the original contract and, therefore, not treated as separate performance obligations but rather as a modification of the existing contract and performance obligation. Bill and Hold Arrangements In certain situations, the Company recognizes revenue under bill-and-hold arrangements with its customers. In all bill-and-hold arrangements, because the customers lack sufficient storage capacity to accept a large amount of material prior to the start of construction, they request that the Company keep the product in our custody. The material is bundled or palletized in the Company’s warehouses, identified separately as belonging to the respective customer and is ready for immediate transport to the customer project upon customer request. Additionally, title and risk of loss has passed to the customer and the Company does not have the ability to use the product or direct it to another customer. Contract Estimates A majority of our revenue is recognized over time as work progresses, and for single performance obligations, we use an input measure, the cost-to-cost method, to determine progress. We review and update the contract related estimates on an ongoing basis and recognize adjustments for any project specific facts and circumstances that could impact the measurement of the extent of progress such as the total costs to complete the contracts, under the cumulative catch-up method. Due to the relatively short duration of our outstanding performance obligations, and our ability to estimate the remaining costs to be incurred, which are substantially all material costs covered under our material supply agreements with our suppliers, we have not recorded any material catch-up adjustments for the periods presented that would have impacted revenues or EPS related to revisions in our measurement of remaining progress of our performance obligations. Contract Balances The timing of revenue recognition, billings and cash collections results in billed accounts receivable, unbilled accounts receivable for goods or services delivered but not invoiced, and deferred revenue (contract liabilities) on the consolidated balance sheets. The majority of the Company’s contract amounts are billed as work progresses in accordance with agreed-upon contractual terms, which generally coincide with the shipment of one or more phases of the project. Billing sometimes occurs subsequent to revenue recognition, resulting in unbilled accounts receivable. The changes in unbilled accounts receivable and the corresponding amounts recorded in revenue relate to fluctuations in the timing and volume of billings for the Company’s revenue recognized over-time. Practical Expedients and Exemptions The Company has elected to adopt certain practical expedients and exemptions as allowed under ASC 606, such as (i) recording sales commissions as incurred because the amortization period is less than one year, (ii) not adjusting for the effects of significant financing components when the contract term is less than one year, (iii) excluding collected sales tax amounts from the calculation of revenue and (iv) accounting for the costs of shipping and handling activities that are incurred after the customer obtains control of the product as fulfillment costs rather than a separate service provided to the customer for which consideration would need to be allocated. Contract Balances The timing of revenue recognition, billings and cash collections results in billed accounts receivable, unbilled receivables (“contract assets”), and deferred revenue (“contract liabilities”) on the condensed consolidated balance sheets. The majority of the Company’s contract amounts are billed as work progresses, in accordance with agreed-upon contractual terms, which generally coincide with the shipment of one or more phases of the project. For certain customer contracts, billing can occur in advance of shipment, resulting in contract liabilities. Billing sometimes occurs subsequent to revenue recognition, resulting in contract assets. The changes in contract assets and the corresponding amounts recorded in revenue relate to fluctuations in the timing and volume of billings.
Research and Development	Research and Development The Company incurs research and development costs during its process of researching and developing new products and significant enhancements to existing products. Research and development costs consist primarily of personnel-related costs associated with our team of internal engineers, third-party consultants, materials and overhead. The Company expenses these costs as incurred prior to a respective product being ready for commercial production.
Inflation Reduction Act Vendor Rebates	Inflation Reduction Act Vendor Rebates On August 16, 2022, the Inflation Reduction Act of 2022 (“IRA”) was enacted into law, which includes numerous green energy credits. The 45X advanced manufacturing production tax credit (“45X Credit”) was established as part of the IRA. The section 45X Credit is a per-unit tax credit that is earned over time for each clean energy component domestically produced and sold by a manufacturer. The Company has, and will continue to enter into, arrangements with manufacturing vendors that produce section 45X Credit eligible parts, in which the vendors agree to share a portion of the benefit received related to Array purchases, in the form of “Vendor Rebates.” The Company accounts for these Vendor Rebates as a reduction of the purchase prices of the vendors’ products and therefore a reduction in the cost of inventory until the inventory is sold, at which time the Company recognizes such rebates as a reduction of cost of product and service on the consolidated statements of operations. For vendor rebates related to past purchases that are owed to the Company upon execution of the agreement, the Company defers recognition of this portion of the rebate and recognizes the amounts as a reduction to cost of product and service revenue as future purchases occur.
Inflation Reduction Act 45X Credits	Inflation Reduction Act 45X Credits The Company accounts for the 45X Advanced Manufacturing Production Credit established by the IRA, under IAS 20 - Accounting for Government Grants and Disclosure of Government Assistance (“IAS 20”), as a reduction to production costs. The tax credit is included as an offset in Income tax payable on the condensed consolidated balance sheet dated December 31, 2024.
Warranty Obligations	Warranty Obligations The Company offers a multi-year assurance type warranty for its products against manufacturer defects and does not contain service elements. For these assurance type warranties, a provision for estimated future costs related to warranty expense is recorded when they are probable and reasonably estimable, which is typically when products are delivered. This provision is based on historical information on the nature, frequency and average cost of claims for each product line. When little or no experience exists for an immature product line, the estimate is based on comparable product lines. These estimates are re-evaluated on an ongoing basis using best-available information and revisions to estimates are made as necessary. Claims estimated to be payable in the following year are classified as current liabilities and those payable beyond one year are classified as long-term liabilities.
Advertising Expenses	Advertising Expenses The cost of advertising, marketing and media is expensed as incurred.
Income Taxes	Income Taxes The Company provides for income taxes based on the provisions of ASC Topic 740 Income Taxes (“ASC 740”), which, among other things, requires that recognition of deferred income taxes be measured by the provisions of enacted tax rates in effect at the date of the consolidated financial statements. A valuation allowance is provided to reduce deferred income tax assets if it is more likely than not that all, or some portion, of such deferred tax assets will not be recognized. Provision for estimated income taxes is based upon elements of income and expense reported in the consolidated statements of operations. The Company also files certain corporate state income tax returns. Generally, the Company is subject to examination by U.S. federal, state and non-U.S. income tax authorities. The current provision for income taxes represents actual or estimated amounts payable on tax return filings each year. Deferred tax assets and liabilities are recorded for the estimated future tax effects of temporary differences between the tax basis of assets and liabilities and amounts reported in the accompanying consolidated balance sheets, and for operating loss and tax credit carryforwards. The change in deferred tax assets and liabilities for the period measures the deferred tax provision or benefit for the period. Effects of changes in enacted tax laws on deferred tax assets and liabilities are reflected as adjustments to the tax provision or benefit in the period of enactment. The Company determines whether uncertain tax positions are more likely than not to be sustained upon examination, including resolution of any related appeals or litigation processes, based on the technical merits of the position. The Company recognizes interest and penalties related to unrecognized tax benefits within interest expense and other expenses, respectively, in the consolidated statements of operations. The Company's liabilities for unrecognized tax benefits are reflected in Other long-term liabilities on the condensed consolidated balance sheet.
Equity-Based Compensation	Equity-Based Compensation The Company recognizes equity-based compensation expense based on the equity award’s grant date fair value. The determination of the fair value of equity awards issued to employees of the Company is based upon the underlying share price and a number of assumptions, including volatility, performance period, risk-free interest rate and expected dividends. The Company values equity awards with a market condition using a Monte Carlo simulation model. The Company accounts for forfeitures as they occur. The grant date fair value of each unit is amortized on a straight-line basis over the requisite service period.
Temporary Equity	Temporary Equity Equity instruments that are redeemable for cash or other assets are classified as temporary equity if the instrument is redeemable, at the option of the holder, at a fixed or determinable price on a fixed or determinable date or upon the occurrence of an event that is not solely within the control of the issuer. Redeemable equity instruments are initially carried at the fair value of the equity instrument at the issuance date, which is subsequently adjusted at each balance sheet date if the instrument is currently redeemable, or probable of becoming redeemable. The Series A Redeemable Perpetual Preferred Stock of the Company, par value $0.001 per share (the “Series A Shares”) issued in connection with the Series A Purchase Agreement, as described in Note 12 – Redeemable Perpetual Preferred Stock, are classified as temporary equity in the accompanying consolidated financial statements. The Company elected the accreted redemption value method under which it accretes changes in redemption value over the period from the date of issuance of the Series A Shares to the earliest costless redemption date (the fifth anniversary) using the effective interest method. Such adjustments are included in preferred undeclared dividends and accretion on Series A Shares on the Company’s consolidated statements of changes in redeemable perpetual preferred stock and stockholders’ equity (deficit) and treated similarly to a dividend on preferred stock in accordance with U.S. GAAP.
Earnings per Share	Earnings per Share Basic earnings per share (“EPS”), is computed by dividing net income available to common shareholders by the weighted average shares outstanding during the period. Diluted EPS takes into account the potential dilution that could occur if securities or other contracts to issue shares, such as stock options, unvested restricted stock, or convertible debt, were exercised and converted into shares. The convertible debt is not currently convertible. Diluted EPS is computed by dividing net income available to common shareholders by the weighted average shares outstanding during the period, increased by the number of additional shares that would have been outstanding if the potential shares had been issued and were dilutive.
Credit Concentration	Credit Concentration Financial instruments that potentially subject the Company to significant concentrations of credit risk consist primarily of cash and accounts receivable. The Company has no significant off balance sheet concentrations of credit risk. The Company maintains its cash with financial institutions that are believed to be of high credit quality and has not experienced any material losses relating to cash balances.
Fair Value	Fair Value Fair value is defined as the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. The Company follows a fair value hierarchy which requires the Company to maximize the use of observable inputs and minimize the use of unobservable inputs when measuring fair value. Three levels of inputs may be used to measure fair value, as follows: •Level 1 - Quoted prices in active markets for identical assets or liabilities. •Level 2 - Observable inputs other than Level 1 prices, such as quoted prices for similar assets or liabilities; quoted prices in markets that are not active; or other inputs that are observable or can be corroborated by observable market data for substantially the full term of the assets or liabilities. •Level 3 - Unobservable inputs that are supported by little or no market activity that are significant to the fair value of the assets or liabilities. The fair values of the Company’s cash, accounts receivable, and accounts payable approximate their carrying values due to their short maturities. The carrying value of the Company’s notes payable approximate their fair values, as they are based on current market rates at which the Company could borrow funds with similar terms. The Company follows the provisions of ASC 820 Fair Value Measurement for nonfinancial assets and liabilities measured at fair value on a non-recurring basis. As it relates to the Company, this applies to certain nonfinancial assets and liabilities acquired in business combinations and measurement of goodwill impairment and non-amortizable intangibles and is thereby measured at fair value, which was determined by the Company with the assistance of third-party valuation specialists.
Recently Issued Accounting Pronouncements and Recently Adopted Accounting Pronouncements	Recently Issued Accounting Pronouncements In December 2023, the Financial Accounting Standards Board (the “FASB”) issued ASU 2023-09, Income Taxes (Topic 740): Improvements to Income Tax Disclosures, which requires disclosure of disaggregated income taxes paid, prescribes standard categories for the components of the effective tax rate reconciliation, and modifies other income tax-related disclosures. The standard will become effective for the Company’s fiscal year ended December 31, 2025, with early adoption permitted. The Company did not adopt this reporting standard early for 2024 and expects no material impacts upon adoption. In November 2024, the FASB issued ASU 2024-03, Income Statement - Reporting Comprehensive Income - Expense Disaggregation Disclosures (Subtopic 220-40), which requires public entities to disclose additional information about specific expense categories in the notes to the financial statements on an interim and annual basis. ASU 2024-03 is effective for fiscal years beginning after December 31, 2026, and for interim periods beginning after December 31, 2027, with early adoption permitted. The Company is currently evaluating the impact of adopting ASU 2024-03. Recently Adopted Accounting Pronouncements In November 2023, the FASB issued ASU 2023-07, Segment Reporting (Topic 280): Improvements to Reportable Segment Disclosures. The amendments in this ASU will require public entities to disclose significant segment expenses and other segment items and to provide in interim periods all disclosures about a reportable segment’s profit or loss and assets that are currently required annually. Public entities with a single reportable segment will also be required to provide the new disclosures and all the disclosures required under ASC 280. The Company adopted ASU 2023-07 during the year ended December 31, 2024. See Note 20 – Segment and Geographic Information in the accompanying notes to the consolidated financial statements for further detail.

Summary of Significant Accounting Policies (Policies)

12 Months Ended

Dec. 31, 2024

The accompanying consolidated financial statements were prepared on the accrual basis of accounting in accordance with U.S. generally accepted accounting principles (“U.S. GAAP”).

Reclassifications

Software Implementation Costs

During the first quarter of 2024, the Company reclassified capitalized software costs recorded as Property, plant and equipment, net to Intangible assets, net on the condensed consolidated balance sheets. The reclassification was recorded retrospectively and resulted in a $4.0 million increase to Intangible assets, net at December 31, 2023, with a corresponding decrease in the same amount to Property, plant and equipment, net.

These reclassifications did not impact the Company’s operating income (loss), net income (loss), earnings (loss) per share, or statements of cash flows for any current or historical periods.

Brazil Value-Added Tax Benefit

Revenue in 2024 and 2023, excludes a Brazil value-added tax benefit, Imposto sobre Circulação de Mercadorias e Servicos (“ICMS”), of $11.8 million and $23.2 million, respectively that has been included in cost of product and service revenue for these periods. For the year ended December 31, 2022, an ICMS benefit of $12.3 million was included in revenues.

This reclassification had no impact on the Company’s gross profit, income (loss) from operations, net income or income (loss) per common share in the current period. This reclassification also did not impact the condensed consolidated balance sheets or condensed consolidated statements of cash flows.

Principles of Consolidation

The consolidated financial statements include the accounts of Array Technologies, Inc. and its subsidiaries. All intercompany accounts and transactions have been eliminated upon consolidation.

Use of Estimates

The preparation of financial statements in conformity with U.S. GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities, the disclosure of contingent assets and liabilities and the reported amounts of revenues and expenses during the reporting period. Although management believes its estimates are reasonable, actual results could differ from those estimates.

Foreign Currency Translation

The Company’s foreign subsidiaries have functional currencies that are different than our reporting currency. When translating balances from the functional currency to the reporting currency, assets and liabilities are translated into U.S. dollars at period end exchange rates, retained earnings is translated at historical rates, and income, expenses, and cash flow items are translated at average exchange rates prevailing during the period. Translation adjustments for these subsidiaries are accumulated within accumulated other comprehensive income. In situations when a foreign subsidiary has a local currency that is different than the functional currency, monetary assets and liabilities are translated into the functional currency at the period end exchange rates, and non-monetary assets and the related income statement effects are translated into the functional currency using historical rates. Gains and losses that result from remeasurement from a local currency to the functional currency are included in earnings.

Cash and Cash Equivalents and Restricted Cash

The Company considers all highly liquid investments purchased with an original maturity of three months or less to be cash equivalents. We regularly maintain cash balances that exceed insured amounts, but we have experienced no losses associated with these amounts to date. At December 31, 2024, restricted cash represents cash deposited with a financial institution by one of our foreign subsidiaries that was restricted for the issuance of certain surety bonds.

Accounts Receivable

The Company’s accounts receivable are due primarily from solar contractors across the U.S. and internationally. Credit is extended in the normal course of business based on evaluation of a customer’s financial condition and, generally, collateral is not required. Trade receivables consist of uncollateralized customer obligations due under normal trade terms requiring payment within 30 to 60 days of the invoice date. Management regularly reviews outstanding accounts receivable and provides for estimated credit losses through an estimate of expected credit losses valuation account.

The allowance for credit losses is a valuation account that is deducted from a financial asset’s amortized cost to present the net amount we expect to collect from the asset. We estimate allowances for credit losses using relevant available information from both internal and external sources. We monitor the estimated credit losses associated with our trade accounts receivable and unbilled accounts receivable based primarily on our

collection history and the delinquency status of amounts owed to us, which we determine based on the aging of such receivables. In evaluating the level of established reserves, management makes judgments regarding the customers’ ability to make required payments, economic events, and other factors. As the financial conditions of these customers change, circumstances develop, or additional information becomes available, adjustments to the valuation account may be required. When deemed uncollectible, the receivable is charged against the valuation account for credit losses or directly written off.

Unbilled receivables represent temporary timing differences between shipments made and billing milestones achieved and are recorded in the accounts receivable balances. Such amounts have not been billed due to pending commercial criteria such as billing on a specified date of the month or upon completion of mega-watt deliveries. Unbilled receivables are invoiced once the underlying commercial criteria have been met and we expect payment within 30 to 60 days.

Inventories

Inventories consist of raw materials and finished goods and are stated at the lower of cost or estimated net realizable value using primarily the moving average cost method that approximates the FIFO method. Provisions are made to reduce excess or obsolete inventories to their estimated net realizable values.

Property, Plant and Equipment

Property, plant and equipment are recorded at cost, net of accumulated depreciation and amortization. Improvements, betterments and replacements which extend the life of an asset are capitalized. Depreciation and amortization is computed using the straight-line method over the estimated useful lives of the respective assets. Repair and maintenance costs are expensed as incurred.

A gain or loss on the sale of property, plant and equipment is calculated as the difference between the cost of the asset disposed of, net of depreciation, and net sales proceeds received. A gain or loss on an asset disposal is recognized in the period that the sale occurs.

Leases

Operating lease arrangements are comprised primarily of real estate and equipment agreements. The Company determines if an arrangement contains a lease at inception based on whether it conveys the right to control the use of an identified asset in exchange for consideration. Lease right-of-use assets (“ROU assets”) and associated lease liabilities are recognized at the commencement date of the lease based on the present value of lease payments over the lease term. ROU assets represent our right to use an underlying asset for the lease term and lease liabilities represent our obligation to make lease payments arising from the lease. Certain

lease agreements may include one or more options to extend or terminate a lease. Lease terms are inclusive of these options if it is reasonably certain that the Company will exercise such options.

ROU assets also include any initial direct costs and prepayments less lease incentives. As most of our leases do not provide an implicit rate, we generally use our incremental borrowing rate based on the estimated rate of interest for collateralized borrowing over a similar term of the lease payments at commencement date. Lease expense is recognized on a straight-line basis over the lease term.

ROU assets and the corresponding operating lease liabilities are included in other assets and other liabilities in our consolidated balance sheets. Finance leases are included in property and equipment, other current liabilities, and other long-term liabilities in our consolidated balance sheets.

Long-Lived Assets

In testing long-lived assets and goodwill for impairment, the Company first tests its long-lived assets for impairment, and then tests the goodwill of a reporting unit that includes the long-lived assets covered under the long-lived asset test for impairment. If an asset group includes only a portion of a reporting unit, the carrying amount of goodwill is not included in the asset group. The carrying values are adjusted, if necessary, for the result of each impairment test prior to performing the next test.

When events, circumstances or operating results indicate that the carrying values of long-lived assets might not be recoverable through future operations, the Company prepares projections of the undiscounted future cash flows expected to be generated from the underlying asset group and the cash flows resulting from the asset groupings eventual disposition. If the projections indicate that the underlying asset grouping is not expected to be recoverable, the estimated fair value of the asset group is determined. An impairment loss is recognized based on the difference between the carrying value of the asset group and its estimated fair value. The loss is allocated to the long-lived assets of the group on pro rata basis using the relative carrying amounts of the asset groups long-lived assets.

Goodwill and Indefinite-Lived Intangible Asset

Goodwill represents the excess of the consideration transferred over the estimated fair value of assets acquired and liabilities assumed in a business combination. Intangible assets are measured at their respective fair values as of the acquisition date and may be subject to adjustment within the measurement period, which may be up to one year from the acquisition date. The Company does not amortize goodwill but instead tests goodwill for impairment annually, or more frequently if events or changes in circumstances indicate that it is more likely than not that the asset is impaired. Such triggering events potentially warranting an annual or interim goodwill impairment assessment include, among other factors, declines in historical or projected revenue, operating income or cash flows, and sustained decreases in the Company’s stock price or market capitalization.

Goodwill is assessed for impairment using either a qualitative assessment or quantitative approach to determine whether it is more likely than not that the fair value of the reporting unit is less than the carrying amount. The qualitative assessment evaluates factors including macroeconomic conditions, industry-specific and company-specific considerations, legal and regulatory environments, and historical performance. If the Company cannot determine if it is more likely than not that the fair value of a reporting unit is greater than its carrying value, a quantitative assessment is performed. The quantitative approach compares the estimated fair value of the reporting unit to its carrying amount, including goodwill. Impairment is indicated if the estimated fair value or the reporting unit is less than the carrying amount of the reporting unit, and an impairment charge is recognized for the differential.

When determining the fair value of a reporting unit using the quantitative approach, we determine the fair value of the reporting unit using an income approach based on discounted cash flows. The fair value determined under the income approach is then compared to guideline publicly-traded companies (“GPC”) market place EBITDA multiples to corroborate the fair value of the reporting unit determined under the income approach.

During the year ended December 31, 2024, the Company identified certain indicators of impairment on various dates, and as a result, performed goodwill impairment tests, which resulted in impairments of goodwill totaling $236.0 million. See Note 7 – Goodwill, Long-Lived Assets, and Other Intangible Assets for additional information. There was no impairment of goodwill for the years ended December 31, 2023 and 2022.

The Company has one indefinite-lived intangible asset for a Trade name it acquired as part of a past acquisition associated with Legacy Array. The Company performs an annual impairment test on its Trade name indefinite-lived intangible asset, utilizing a qualitative or quantitative impairment analysis during the fourth quarter of each year. There were no indicators of impairment associated with this Trade name,

Amortizable and Other Intangible Assets

The Company amortizes identifiable finite lived intangible assets consisting of developed technology, customer relationships, contractual backlog and the STI trade name on a straight-line basis over the assets’ estimated useful lives. The basis of amortization approximates the pattern in which the assets are utilized, over their estimated useful lives.

Other Intangible Assets

The Array Technologies trade name has been determined to have an indefinite life and, therefore, is not amortized but is subject to an annual impairment test or at any other time when impairment indicators exist.

Debt Discount and Issuance Costs

Debt discount and issuance costs incurred to issue debt are deferred and amortized using the effective interest method as a component of interest expense over the life of the related debt agreement.

Revenue Recognition and Contract Balances

Revenue Recognition

In accordance with ASC 606, the Company recognizes revenues from the sale of solar tracking systems, parts, installation services, extended warranties on solar tracker system components and software licenses along with associated maintenance and support. The Company determines its revenue recognition through the following steps (i) identification of the contract or contracts with a customer, (ii) identification of the performance obligations within the contract, (iii) determination of the transaction price, (iv) allocation of the transaction price to the performance obligations within the contract, and (v) recognition of revenue when, or as the performance obligation has been satisfied.

In assessing the recognition of revenue, the Company also evaluates whether two or more contracts should be combined and accounted for as one contract and if the combined or single contract should be accounted for as multiple performance obligations which could change the amount of revenue and profit (loss) recorded in a period. Further, the Company assesses whether control of the product or services promised under the contract is transferred to the customer at a point in time or over time.

Performance Obligations

The Company’s contracts for specific solar tracker system projects with customers are predominantly accounted for as a single performance obligation, because the Company is integrating the solar tracking system components and related services as part of a single project. The Company’s performance creates and enhances an asset that the customer controls as the Company performs under the contract, which is principally as tracker system components are delivered to the designated project site. The Company sources the component parts from third party manufacturers, it obtains control and receives title of such parts before transferring them to the customer because the Company is responsible for fulfillment to its customer. The Company’s engineering services and professional services are interdependent with the component parts whereby the parts form an input into a combined output for which it is the principal, and the Company could redirect the parts before they are transferred to the customer if needed. The customer owns the work-in-process over the course of the project and the Company’s performance enhances a customer-controlled asset, resulting in the recognition of the performance obligation over time.

In contracts with a single performance obligation, the Company’s obligation is satisfied over-time as control is transferred to the customer by measuring the progress toward complete satisfaction of the performance obligation using an input (i.e., the “cost-to-cost”) method. Under the cost-to-cost measure of progress, the extent of progress towards completion is measured based on the ratio of costs incurred to date to the total estimated costs at completion of the performance obligation. The costs of materials and hardware components are recognized as incurred, which is typically upon delivery to the customer site or upon transfer of control while in transit.

For contracts with customers that result in multiple performance obligations, the Company allocates the contract’s transaction price to each performance obligation using its best estimate of the standalone selling price of each distinct good or service in the contract. These contracts include contracts for the sale of components, contracts with installation services, solar tracker systems sold with an extended warranty, and contracts that include the sale of software and maintenance. For all years presented, the transaction price associated with extended warranties and the sale of software and maintenance was not material. The Company generally uses the expected cost-plus margin approach to estimate the standalone selling price of each performance obligation.

For contracts related to the sale of components as opposed to contracts to provide an integrated solar tracker project, the Company’s obligation to the customer is to deliver components that are used by the customer to create a tracker system and does not include engineering or other professional services or the obligation to provide such services in the future. Under these arrangements, each component is a distinct performance obligation, and often the components are delivered in batches at different points in time. The Company estimates the standalone selling price (“SSP”) of each component performance obligation based on a cost-plus margin approach. Revenue allocated to a component is recognized at the point in time that control of the component transfers to the customer, which is usually upon delivery to the customer’s site.

Contracts are often modified through change orders to account for changes in specifications or design, manner of performance, equipment, materials, scope of work, and/or the period of completion of the project. Although the Company evaluates each change order to determine whether such modification creates a separate performance obligation, the majority of change orders are for goods or services that are not distinct within the context of the original contract and, therefore, not treated as separate performance obligations but rather as a modification of the existing contract and performance obligation.

Bill and Hold Arrangements

In certain situations, the Company recognizes revenue under bill-and-hold arrangements with its customers. In all bill-and-hold arrangements, because the customers lack sufficient storage capacity to accept a large amount of material prior to the start of construction, they request that the Company keep the product in our custody. The material is bundled or palletized in the Company’s warehouses, identified separately as belonging to the respective customer and is ready for immediate transport to the customer project upon customer request. Additionally, title and risk of loss has passed to the customer and the Company does not have the ability to use the product or direct it to another customer.

Contract Estimates

A majority of our revenue is recognized over time as work progresses, and for single performance obligations, we use an input measure, the cost-to-cost method, to determine progress. We review and update the contract related estimates on an ongoing basis and recognize adjustments for any project specific facts and circumstances that could impact the measurement of the extent of progress such as the total costs to complete the contracts, under the cumulative catch-up method. Due to the relatively short duration of our outstanding performance obligations, and our ability to estimate the remaining costs to be incurred, which are substantially all material costs covered under our material supply agreements with our suppliers, we have not recorded any material catch-up adjustments for the periods presented that would have impacted revenues or EPS related to revisions in our measurement of remaining progress of our performance obligations.

Contract Balances

The timing of revenue recognition, billings and cash collections results in billed accounts receivable, unbilled accounts receivable for goods or services delivered but not invoiced, and deferred revenue (contract liabilities) on the consolidated balance sheets. The majority of the Company’s contract amounts are billed as work progresses in accordance with agreed-upon contractual terms, which generally coincide with the shipment of one or more phases of the project. Billing sometimes occurs subsequent to revenue recognition, resulting in unbilled accounts receivable. The changes in unbilled accounts receivable and the corresponding amounts recorded in revenue relate to fluctuations in the timing and volume of billings for the Company’s revenue recognized over-time.

Practical Expedients and Exemptions

The Company has elected to adopt certain practical expedients and exemptions as allowed under ASC 606, such as (i) recording sales commissions as incurred because the amortization period is less than one year, (ii) not adjusting for the effects of significant financing components when the contract term is less than one year, (iii) excluding collected sales tax amounts from the calculation of revenue and (iv) accounting for the costs of shipping and handling activities that are incurred after the customer obtains control of the product as fulfillment costs rather than a separate service provided to the customer for which consideration would need to be allocated.

Contract Balances

The timing of revenue recognition, billings and cash collections results in billed accounts receivable, unbilled receivables (“contract assets”), and deferred revenue (“contract liabilities”) on the condensed consolidated balance sheets. The majority of the Company’s contract amounts are billed as work progresses, in accordance with agreed-upon contractual terms, which generally coincide with the shipment of one or more phases of the project. For certain customer contracts, billing can occur in advance of shipment, resulting in contract liabilities. Billing sometimes occurs subsequent to revenue recognition, resulting in contract assets. The changes in contract assets and the corresponding amounts recorded in revenue relate to fluctuations in the timing and volume of billings.

Research and Development

The Company incurs research and development costs during its process of researching and developing new products and significant enhancements to existing products. Research and development costs consist primarily of personnel-related costs associated with our team of internal engineers, third-party consultants, materials and overhead. The Company expenses these costs as incurred prior to a respective product being ready for commercial production.

Inflation Reduction Act Vendor Rebates

On August 16, 2022, the Inflation Reduction Act of 2022 (“IRA”) was enacted into law, which includes numerous green energy credits. The 45X advanced manufacturing production tax credit (“45X Credit”) was established as part of the IRA. The section 45X Credit is a per-unit tax credit that is earned over time for each clean energy component domestically produced and sold by a manufacturer. The Company has, and will continue to enter into, arrangements with manufacturing vendors that produce section 45X Credit eligible parts, in which the vendors agree to share a portion of the benefit received related to Array purchases, in the form of “Vendor Rebates.”

The Company accounts for these Vendor Rebates as a reduction of the purchase prices of the vendors’ products and therefore a reduction in the cost of inventory until the inventory is sold, at which time the Company recognizes such rebates as a reduction of cost of product and service on the consolidated statements of operations. For vendor rebates related to past purchases that are owed to the Company upon execution of the agreement, the Company defers recognition of this portion of the rebate and recognizes the amounts as a reduction to cost of product and service revenue as future purchases occur.

Inflation Reduction Act 45X Credits

The Company accounts for the 45X Advanced Manufacturing Production Credit established by the IRA, under IAS 20 - Accounting for Government Grants and Disclosure of Government Assistance (“IAS 20”), as a reduction to production costs. The tax credit is included as an offset in Income tax payable on the condensed consolidated balance sheet dated December 31, 2024.

Warranty Obligations

The Company offers a multi-year assurance type warranty for its products against manufacturer defects and does not contain service elements. For these assurance type warranties, a provision for estimated future costs related to warranty expense is recorded when they are probable and reasonably estimable, which is typically when products are delivered. This provision is based on historical information on the nature, frequency and average cost of claims for each product line. When little or no experience exists for an immature product line, the estimate is based on comparable product lines. These estimates are re-evaluated on an ongoing basis using best-available information and revisions to estimates are made as necessary. Claims estimated to be payable in the following year are classified as current liabilities and those payable beyond one year are classified as long-term liabilities.

Advertising Expenses

The cost of advertising, marketing and media is expensed as incurred.

Income Taxes

The Company provides for income taxes based on the provisions of ASC Topic 740 Income Taxes (“ASC 740”), which, among other things, requires that recognition of deferred income taxes be measured by the provisions of enacted tax rates in effect at the date of the consolidated financial statements. A valuation allowance is provided to reduce deferred income tax assets if it is more likely than not that all, or some portion, of such deferred tax assets will not be recognized. Provision for estimated income taxes is based upon elements of income and expense reported in the consolidated statements of operations. The Company also files certain corporate state income tax returns. Generally, the Company is subject to examination by U.S. federal, state and non-U.S. income tax authorities. The current provision for income taxes represents actual or estimated amounts payable on tax return filings each year. Deferred tax assets and liabilities are recorded for the estimated future tax effects of temporary differences between the tax basis of assets and liabilities and amounts reported in the accompanying consolidated balance sheets, and for operating loss and tax credit carryforwards. The change in deferred tax assets and liabilities for the period measures the deferred tax provision or benefit for the period. Effects of changes in enacted tax laws on deferred tax assets and liabilities are reflected as adjustments to the tax provision or benefit in the period of enactment.

The Company determines whether uncertain tax positions are more likely than not to be sustained upon examination, including resolution of any related appeals or litigation processes, based on the technical merits of the position.

The Company recognizes interest and penalties related to unrecognized tax benefits within interest expense and other expenses, respectively, in the consolidated statements of operations. The Company's liabilities for unrecognized tax benefits are reflected in Other long-term liabilities on the condensed consolidated balance sheet.

Equity-Based Compensation

The Company recognizes equity-based compensation expense based on the equity award’s grant date fair value. The determination of the fair value of equity awards issued to employees of the Company is based upon the underlying share price and a number of assumptions, including volatility, performance period, risk-free interest rate and expected dividends. The Company values equity awards with a market condition using a Monte Carlo simulation model. The Company accounts for forfeitures as they occur. The grant date fair value of each unit is amortized on a straight-line basis over the requisite service period.

Temporary Equity

Equity instruments that are redeemable for cash or other assets are classified as temporary equity if the instrument is redeemable, at the option of the holder, at a fixed or determinable price on a fixed or determinable date or upon the occurrence of an event that is not solely within the control of the issuer. Redeemable equity instruments are initially carried at the fair value of the equity instrument at the issuance date, which is subsequently adjusted at each balance sheet date if the instrument is currently redeemable, or probable of becoming redeemable. The Series A Redeemable Perpetual Preferred Stock of the Company, par value $0.001 per share (the “Series A Shares”) issued in connection with the Series A Purchase Agreement, as described in Note 12 – Redeemable Perpetual Preferred Stock, are classified as temporary equity in the accompanying consolidated financial statements. The Company elected the accreted redemption value method under which it accretes changes in redemption value over the period from the date of issuance of the Series A Shares to the earliest costless redemption date (the fifth anniversary) using the effective interest method. Such adjustments are included in preferred undeclared dividends and accretion on Series A Shares on the Company’s consolidated statements of changes in redeemable perpetual preferred stock and stockholders’ equity (deficit) and treated similarly to a dividend on preferred stock in accordance with U.S. GAAP.

Earnings per Share

Basic earnings per share (“EPS”), is computed by dividing net income available to common shareholders by the weighted average shares outstanding during the period. Diluted EPS takes into account the potential dilution that could occur if securities or other contracts to issue shares, such as stock options, unvested restricted stock, or convertible debt, were exercised and converted into shares. The convertible debt is not currently convertible. Diluted EPS is computed by dividing net income available to common shareholders by the weighted average shares outstanding during the period, increased by the number of additional shares that would have been outstanding if the potential shares had been issued and were dilutive.

Credit Concentration

Financial instruments that potentially subject the Company to significant concentrations of credit risk consist primarily of cash and accounts receivable. The Company has no significant off balance sheet concentrations of credit risk. The Company maintains its cash with financial institutions that are believed to be of high credit quality and has not experienced any material losses relating to cash balances.

Fair Value

Fair value is defined as the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. The Company follows a fair value hierarchy which requires the Company to maximize the use of observable inputs and minimize the use of unobservable inputs when measuring fair value.

Three levels of inputs may be used to measure fair value, as follows:

•Level 1 - Quoted prices in active markets for identical assets or liabilities.

•Level 2 - Observable inputs other than Level 1 prices, such as quoted prices for similar assets or liabilities; quoted prices in markets that are not active; or other inputs that are observable or can be corroborated by observable market data for substantially the full term of the assets or liabilities.

•Level 3 - Unobservable inputs that are supported by little or no market activity that are significant to the fair value of the assets or liabilities.

The fair values of the Company’s cash, accounts receivable, and accounts payable approximate their carrying values due to their short maturities. The carrying value of the Company’s notes payable approximate their fair values, as they are based on current market rates at which the Company could borrow funds with similar terms.

The Company follows the provisions of ASC 820 Fair Value Measurement for nonfinancial assets and liabilities measured at fair value on a non-recurring basis. As it relates to the Company, this applies to certain nonfinancial assets and liabilities acquired in business combinations and measurement of goodwill impairment and non-amortizable intangibles and is thereby measured at fair value, which was determined by the Company with the assistance of third-party valuation specialists.

Recently Issued Accounting Pronouncements and Recently Adopted Accounting Pronouncements

Recently Issued Accounting Pronouncements

In December 2023, the Financial Accounting Standards Board (the “FASB”) issued ASU 2023-09, Income Taxes (Topic 740): Improvements to Income Tax Disclosures, which requires disclosure of disaggregated income taxes paid, prescribes standard categories for the components of the effective tax rate reconciliation,

and modifies other income tax-related disclosures. The standard will become effective for the Company’s fiscal year ended December 31, 2025, with early adoption permitted. The Company did not adopt this reporting standard early for 2024 and expects no material impacts upon adoption.

In November 2024, the FASB issued ASU 2024-03, Income Statement - Reporting Comprehensive Income - Expense Disaggregation Disclosures (Subtopic 220-40), which requires public entities to disclose additional information about specific expense categories in the notes to the financial statements on an interim and annual basis. ASU 2024-03 is effective for fiscal years beginning after December 31, 2026, and for interim periods beginning after December 31, 2027, with early adoption permitted. The Company is currently evaluating the impact of adopting ASU 2024-03.

Recently Adopted Accounting Pronouncements

In November 2023, the FASB issued ASU 2023-07, Segment Reporting (Topic 280): Improvements to Reportable Segment Disclosures. The amendments in this ASU will require public entities to disclose significant segment expenses and other segment items and to provide in interim periods all disclosures about a reportable segment’s profit or loss and assets that are currently required annually. Public entities with a single reportable segment will also be required to provide the new disclosures and all the disclosures required under ASC 280. The Company adopted ASU 2023-07 during the year ended December 31, 2024. See Note 20 – Segment and Geographic Information in the accompanying notes to the consolidated financial statements for further detail.