10-Q

U.S. SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-Q

(Mark One)

☒	Quarterly Report under Section 13 or 15(d) of the Securities Exchange Act of 1934
	For the quarterly period ended September 30, 2018 or
☐	Transition Report under Section 13 or 15(d) of the Exchange Act
	For the Transition Period from ________to __________

Commission File Number: 000-55818

BioCrude Technologies USA, Inc.

(Exact Name of Registrant as Specified in its Charter)

Nevada	81-2924160
(State of incorporation)	(I.R.S. Employer Identification No.)

1255 Phillips Square, Suite 605

Montreal, Quebec, Canada H3B 3G5

(Address of principal executive offices)

514-840-9719

(Registrant's telephone number including area code)

Indicate by check mark whether the issuer (1) filed all reports required to be filed by Section13 or 15(d) of the Exchange Act of 1934 during the past 12 months (or such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

Yes ☐ No ☒

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company.

Large accelerated filer £ Accelerated filer £ Non-accelerated filer £ Smaller reporting company ☒

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).

Yes ☐ No ☒

As of September 30, 2018, the issuer had 50,425,007 shares of common stock issued and outstanding.

	TABLE OF CONTENTS	Page
PART I – FINANCIAL INFORMATION
Item 1.	Financial Statements- Unaudited	3
Item 2.	Management’s Discussion and Analysis of Financial Condition and Results of Operation	11
Item 3.	Quantitative and Qualitative Disclosures about Market Risk	32
Item 4.	Controls and Procedures	32
PART II – OTHER INFORMATION
Item 1.	Legal Proceedings	32
Item 1A.	Risk Factors	32
Item 2.	Unregistered Sales of Equity Securities and Use of Proceeds	33
Item 3.	Defaults Upon Senior Securities	33
Item 4.	Submission of Matters to a Vote of Security Holders	33
Item 5.	Other Information	33
Item 6.	Exhibits	33

2

PART I – FINANCIAL INFORMATION

ITEM 1. FINANCIAL STATEMENTS

BIOCRUDE TECHNOLOGIES USA, INC.

CONSOLIDATED BALANCE SHEETS

	UNAUDITED September 30,			December 31,
	2018			2017
ASSETS
CURRENT ASSETS
Cash	$	53,901		$	76,839
Prepaid Expenses		51,544			33,670
TOTAL ASSETS	$	105,445		$	110,509
LIABILITIES AND STOCKHOLDERS’ DEFICIT
CURRENT LIABILITIES
Accounts payable and accrued liabilities	$	8,155		$	14,274
Accounts payable and accrued liabilities – related party4		130,745			263,218
Convertible debt5		—			20,387
Loans payable4		92,323			123,473
TOTAL LIABILITIES	$	231,223		$	421,352
COMMITMENTS AND CONTINGENCIES
STOCKHOLDERS’ DEFICIT
Common stock, $0.001 par value, 75,000,000 shares authorized, 50,425,007 and 50,054,643 shares issued and outstanding as at September 30, 2018 and December 31, 2017, respectively6		50,424			50,054
Additional paid-in capital		7,375,990			6,358,560
Accumulated other comprehensive income		74,554			28,700
Accumulated deficit		(7,626,746	)		(6,748,157	)
TOTAL STOCKHOLDERS' DEFICIT		(125,778	)		(310,843	)
TOTAL LIABILITIES AND STOCKHOLDERS' DEFICIT	$	105,445		$	110,509

See accompanying notes to unaudited interim consolidated financial statements.

3

BIOCRUDE TECHNOLOGIES USA, INC.

CONSOLIDATED STATEMENTS OF OPERATIONS AND COMPREHENSIVE INCOME (LOSS)

FOR THE THREE AND NINE MONTHS ENDED SEPTEMBER 30, 2018 AND 2017

(UNAUDITED)

	For the Three Months Ended						For the Nine months ended
	September 30 2018			September 30 2017			September 30 2018			September 30 2017
REVENUE	$	—		$	—		$	—		$	—
OPERATING EXPENSES
General and administrative		57,795			222,477			852,117			286,552
Total operating expenses		57,795			222,477			852,117			286,552
LOSS FROM OPERATIONS		(57,795	)		(222,477	)		(852,117	)		(286,552	)
Foreign exchange loss		—			9,115			—			12,784
Interest expense		1,532			139			26,472			4,833
NET LOSS	$	(59,327	)	$	(231,731	)	$	(878,589	)		(304,169	)
Net loss per common share – basic and diluted	$	(0.00	)	$	(0.00	)	$	(0.00	)		(0.01	)
Weighted average number of common shares outstanding – basic and diluted		50,116,655			49,808,953			50,116,655			49,808,303
COMPREHENSIVE INCOME (LOSS)
Net loss	$	(59,327	)	$	(231,731	)	$	(878,589	)	$	(304,169	)
Other comprehensive income (loss) – gain (loss) on foreign currency translation		(727	)		—			45,854			—
Total comprehensive income (loss)	$	(60,054	)	$	(231,731	)	$	(832,735	)	$	(304,169	)

See accompanying notes to unaudited interim consolidated financial statements.

4

BIOCRUDE TECHNOLOGIES USA, INC.

CONSOLIDATED STATEMENTS OF CHANGES OF STOCKHOLDERS’ DEFICIT

FOR THE NINE MONTHS ENDED SEPTEMBER 30, 2018 AND DECEMBER 31, 2017

(UNAUDITED)

	Common Stock				Additional		Accumulated Other						Total
	Shares		Par Value		Paid-in Capital		Comprehensive Income (Loss)			Accumulated Deficit			Stockholders’ Deficit
Balance, December 31, 2017		50,054,643		50,054		6,358,560		28,700			(6,748,157	)		(310,843	)
Share-based compensation		155,835		156		623,182		—			—			623,338
Issuance of common stock for debt conversion		199,468		199		328,923		—			—			329,122
Proceeds from issuance of common stock for cash		6,000		6		23,994		—			—			24,000
Beneficial conversion feature		—		—		19,240		—			—			19,240
Net loss		—		—		—		49,340			(796,191	)		(746,851	)
Balance, March 31, 2018		50,415,946	$	50,415	$	7,353,899	$	78,040		$	(7,544,348	)	$	(61,994	)
Share-based compensation		—		—		—		—			—			—
Issuance of common stock for debt conversion		6,061		6		9,994		—			—			10,000
Proceeds from issuance of common stock for cash		—		—		—		—			—			—
Beneficial conversion feature		—		—		100		—			—			100
Net loss		—		—		—		(2,759	)		(23,071	)		(25,830	)
Balance, June 30, 2018		50,422,007	$	50,421	$	7,363,993	$	75,281		$	(7,567,419	)	$	(77,724	)
Share-based compensation		3,000		3		11,997		—			—			12,000
Issuance of common stock for debt conversion		—		—		—		—			—			—
Proceeds from issuance of common stock for cash		—		—		—		—			—			—
Beneficial conversion feature		—		—		—		—			—			—
Net loss		—		—		—		(727	)		(59,327	)		(60,054	)
Balance, September 30, 2018		50,425,007	$	50,424	$	7,375,990	$	74,554		$	(7,626,746	)	$	(125,778	)

See accompanying notes to unaudited interim consolidated financial statements.

5

BIOCRUDE TECHNOLOGIES USA, INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

FOR THE NINE MONTHS ENDED SEPTEMBER 30, 2018 AND DECEMBER 31, 2017

	UNAUDITED
	September 30, 2018			December 31, 2017
CASH FLOWS FROM OPERATING ACTIVITIES:
Net loss for the period	$	(832,735	)	$	(403,999	)
Adjustments to reconcile net loss to net cash used in operating activities:
Stock-based compensation		669,009			197,580
Shares issued for debt issue costs		—			6,211
Accretion and other non-cash interest		—			6,895
Foreign exchange		—			18,247
Changes in operating assets and liabilities: Prepaid expenses		(17,874	)		—
Accounts payable and accrued liabilities		(6,119	)		11,491
Accounts payable and accrued liabilities – related party		(132,473	)		—
Net cash used in operating activities	$	(320,192	)	$	(163,575	)
CASH FLOWS FROM FINANCING ACTIVITIES:
Proceeds (repayments) from related party advances		—			79,115
Proceeds from issuance of convertible debt – related parties		—			—
Proceeds (repayments) from subscriptions (private placements)		(20,387	)		48,753
Proceeds from issuance of convertible debt		348,791			112,378
Proceeds (repayments) of loans payable		(31,150	)		—
Net cash provided by financing activities	$	297,254		$	240,246
Impact on cash from foreign currency translation		—			—
NET INCREASE IN CASH		(22,938	)		76,671
CASH AT BEGINNING OF THE PERIOD		76,839			168
CASH AT END OF THE PERIOD	$	53,901		$	76,839
SUPPLEMENTAL DISCLOSURE OF CASH FLOWS INFORMATION:
Cash paid for income taxes	$	—		$	—
Cash paid for interest expense	$	—		$	—
NONCASH INVESTING AND FINANCING ACTIVITIES:
Beneficial conversion feature discount related to the issuance of convertible debt	$	19,340		$	6,352
Conversion of convertible debt to common stock	$	319,882		$	128,737

See accompanying notes to unaudited interim consolidated financial statements.

6

BIOCRUDE TECHNOLOGIES USA, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(UNAUDITED)

NOTE 1 – ORGANIZATION AND BASIS OF PRESENTATION

Organization & Nature of Operations

BioCrude Technologies USA, Inc. (the “Company” and/or “BioCrude”) was originally organized in the State of Nevada on August 4, 2015 and is a startup company that provides consulting as well as supplies waste management services, more particularly, with specialization in the Waste to Energy (W2E) milieu. The mission and ethos of the Company is to acquire the necessary Concessions from appropriate Governmental Authorities of municipalities/countries responsible for same, in order for the Company to implement its technical expertise and knowhow to develop its proposed “Integrated Municipal Solid Waste (“MSW”) to Renewable Energy Complex” for the treatment and disposal of MSW for municipal applications.

Interim Financial Statements

The unaudited interim consolidated financial statements of the Company have been prepared in accordance with United States generally accepted accounting principles (“GAAP”) for interim financial information and the rules and regulations of the Securities and Exchange Commission (“SEC”). They do not include all information and footnotes required by GAAP for complete financial statements. Except as disclosed herein, there have been no material changes in the information disclosed in the notes to the financial statements for the year ended December 31, 2017 included in the Company’s 2017 annual report on Form 10-K, filed with the SEC. The unaudited interim consolidated financial statements should be read in conjunction with those financial statements included in Form 10-K. In the opinion of management, all adjustments considered necessary for fair presentation, consisting solely of normal recurring adjustments, have been made. Operating results for the nine-month period ended September 30, 2018 are not necessarily indicative of the results that may be expected for the year ending December 31, 2018.

Basis of Presentation and Principles of Consolidation

The accompanying consolidated financial statements of the Company have been prepared in accordance with GAAP in the United States of America and the rules of the Securities and Exchange Commission (“SEC”).

The consolidated financial statements herein have been prepared in accordance with GAAP and include the accounts of the Company and its holdings of a partially-owned subsidiary as follows:

Name of Subsidiary	Country of Incorporation	Ownership	Principle Activities
BioCrude Technologies (Hong Kong) Limited.	China	70%	Waste management

All intercompany accounts and transactions have been eliminated

NOTE 2 – GOING  CONCERN

As of September 30, 2018, the Company had an accumulated deficit of $7,626,746 and negative working capital of $125,778. Losses have principally occurred as a result of the substantial resources required for marketing and lobbying efforts of the Company’s concessions pursuit worldwide which included the general and administrative expenses associated with its organization and product development. These conditions raise substantial doubt about the Company’s ability to continue as a going concern. These financial statements do not include any adjustments to reflect the possible future effect on the recoverability and classification of assets or the amounts and classifications of liabilities that may result from the outcome of these uncertainties. Management plans to obtain additional funding and implement its strategic plan to allow the opportunity for the Company to continue as a going concern.

NOTE 3 – SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

Basis of presentation

These consolidated financial statements and related notes are presented in accordance with US GAAP and are presented in United States dollars

7

Use of Estimates

Preparing financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenue, and expenses. Actual results and outcomes may differ from management’s estimates and assumptions.

Cash and Cash Equivalents

For purposes of the statement of cash flows, the Company considers all highly liquid instruments purchased with an original maturity of three months or less to be cash equivalents.

Stock-Based Compensation

The Company accounts for all share-based payment awards made to employees and directors, based on their fair value. The Company measures share-based compensation to consultants by recognizing the fair value of the awards over the period the services are rendered or goods are provided.

Basic and Diluted Loss per Share

Basic loss per share is computed by dividing net loss available to common shareholders by the weighted average number of outstanding common shares during the period. Diluted loss per share gives effect to all dilutive potential common shares outstanding during the period. Dilutive loss per share excludes all potential common shares if their effect is anti-dilutive.

Income Taxes

The company has elected to account for income taxes using the taxes payable method. The taxes payable and provision for income taxes are based on the corporate income tax returns filed. There is no adjustment for income taxes related to temporary differences and no recognition of the benefit of income tax losses carried forward resulting from the net operating loss in the current period.

Foreign Currency Translation and Transaction

The Company’s reporting currency is the United States dollar. For the year ended December 31, 2017, the Company’s functional currency was predominantly the Canadian dollar, as opposed to the United States dollar. At January 1, 2017, as a result of the majority of the Company’s financing and operating activities being denominated in United States dollar, the Company re-evaluated its functional currency and determined it to be the United States dollar. Gains and losses that resulted from translation from Canadian dollars to the reporting currency and included in other comprehensive income will remain in the foreign currency translation reserve.

The Subsidiary’s functional and reporting currency is the United States dollar.

Foreign exchange gains and losses on the settlement of foreign currency transactions are included in foreign exchange expense. Except for translations of intercompany balances, all translations of monetary balances to the functional currency at the year-end exchange rate are included in foreign exchange expense. The translations of intercompany balances to the functional currency at the year-end exchange rate are included in accumulated other comprehensive income or loss.  

The Company has not, to the date of these consolidated financial statements, entered into derivative instruments to offset the impact of foreign currency fluctuations.

Share-based Expense

ASC 718, "Compensation – Stock Compensation", prescribes accounting and reporting standards for all share-based payment transactions in which employee services are acquired. Transactions include incurring liabilities, or issuing or offering to issue shares, options, and other equity instruments such as employee stock ownership plans and stock appreciation rights. Share-based payments to employees, including grants of employee stock options, are recognized as compensation expense in the financial statements based on their fair values. That expense is recognized over the period during which an employee is required to provide services in exchange for the award, known as the requisite service period (usually the vesting period).

The Company accounts for stock-based compensation issued to non-employees and consultants in accordance with the provisions of ASC 505-50, "Equity – Based Payments to Non-Employees."  Measurement of share-based payment transactions with non-employees is based on the fair value of whichever is more reliably measurable: (a) the goods or services received; or (b) the equity instruments issued.  The fair value of the share-based payment transaction is determined at the earlier of performance commitment date or performance completion date.  

8

Earnings Per Share Information

FASB ASC 260, "Earnings Per Share" provides for calculation of "basic" and "diluted" earnings per share.  Basic earnings per share includes no dilution and is computed by dividing net loss available to common shareholders by the weighted average common shares outstanding for the period.  Diluted earnings per share reflect the potential dilution of securities that could share in the earnings of an entity similar to fully diluted earnings per share.  Basic and diluted loss per share were the same, at the reporting dates, as there were no common stock equivalents outstanding.

Fair Value Measurements

The Company adopted the provisions of ASC Topic 820, "Fair Value Measurements and Disclosures", which defines fair value as used in numerous accounting pronouncements, establishes a framework for measuring fair value and expands disclosure of fair value measurements.

The estimated fair value of certain financial instruments, including cash and cash equivalents, payables to related parties, and accounts payable and accrued expenses are carried at historical cost basis, which approximates their fair values because of the short-term nature of these instruments.

ASC 820 defines fair value as the exchange price that would be received for an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date.  ASC 820 also establishes a fair value hierarchy, which requires an entity to maximize the use of observable inputs and minimize the use of unobservable inputs when measuring fair value. ASC 820 describes three levels of inputs that be used to measure fair value:

Level 1 - quoted prices in active markets for identical assets or

Level 2 - quoted prices for similar assets and liabilities in active markets or inputs that are observable

Level 3 - inputs that are unobservable (for example cash flow modeling inputs based on assumptions)

The Company's financial assets and liabilities are subsequent measured at amortized cost, but their carrying amount approximates their fair value due to the short period of time until maturity.

New and Recently Issued Accounting Pronouncements

In April 2015, the FASB issued ASU No. 2015-03, Interest - Imputation of Interest (Subtopic 835-30) - Simplifying the Presentation of Debt Issuance Costs. ASU 2015-03 amends previous guidance to require that debt issuance costs related to a recognized debt liability be presented in the balance sheet as a direct deduction from the carrying amount of that debt liability, consistent with debt discounts. The recognition and measurement guidance for debt issuance costs are not affected by the amendments in this ASU. The standard is effective for financial statements issued for fiscal years beginning after December 15, 2015, and interim periods within those fiscal years. Early adoption is permitted for financial statements that have not been previously issued. The Company expects that the affected amounts on its balance sheets will be reclassified within the balance sheets upon adoption of this ASU to conform to this standard.

The Company does not expect the adoption of any other recently issued accounting pronouncements to have a material impact on its financial statements.

Subsequent Events

The Company has evaluated all transactions from September 30, 2018 through November 8, 2018, the financial statement issuance date, for subsequent event disclosure consideration, and as such, has determined that there are no significant transactions within this aforesaid timeframe that merit disclosure.

9

NOTE 4 – RELATED-PARTY TRANSACTIONS

As of September 30, 2018, the Company had outstanding advances due to the Company’s Chief Executive Officer of $130,745 (December 31, 2017 - $263,218) included in accounts payable – related parties. These amounts are unsecured, due on demand and bear no interest.

During the nine months ended September 30, 2018, the Company made net repayments of $132,473 (2017 - $15,391) to the Company’s Chief Executive Officer for amounts previously advanced to the Company.

Loans Payable – Related Parties

As of September 30, 2018, the Company had CAD $40,000 (December 31, 2017 – CAD $40,000) of outstanding loans payable to related parties that are past due and have an annual interest rate of 4%. As of September 30, 2018, accrued interest relating to this loan is $7,228 (December 31, 2017 - $3,695).

During the nine months ended September 30, 2018, the Company recorded interest expenses to related parties of $26,409 (2017 - $5,199). As of September 30, 2018, the Company has accrued interest balances of $8,007 (December 31, 2017 - $5,968).

Related Party Transactions

During the nine months ended September 30, 2018, the Company incurred $28,004 in administration fees to the Company’s Chief Executive Officer.

NOTE 5 – CONVERTIBLE DEBTS

As of the nine months ended September 30, 2018, there are no convertible notes outstanding.

NOTE 6 – SHARE CAPITAL

The Company is authorized to issue up to 75,000,000 shares of common stock at par value $0.001 per share. As of September 30, 2018, the Company had 50,425,007 (December 31, 2017 - 50,054,643) shares of common stock issued and outstanding, respectively.

10

ITEM 2. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

Forward-Looking Statements

This Form 10-Q includes "forward-looking statements" within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended. All statements, other than statements of historical facts, included or incorporated by reference in this Form 10-Q which address activities, events or developments which the Company expects or anticipates will or may occur in the future, including such things as future capital expenditures (including the amount and nature thereof); finding suitable merger or acquisition candidates; expansion and growth of the Company's business and operations; and other such matters are forward-looking statements. These statements are based on certain assumptions and analyses made by the Company in light of its experience and its perception of historical trends, current conditions and expected future developments, as well as other factors it believes are appropriate under the circumstances. However, whether actual results or developments will conform with the Company's expectations and predictions is subject to a number of risks and uncertainties, including general economic, market and business conditions; the business opportunities (or lack thereof) that may be presented to and pursued by the Company; changes in laws or regulation; and other factors, most of which are beyond the control of the Company.

These forward-looking statements can be identified by the use of predictive, future-tense or forward-looking terminology, such as "believes," "anticipates," "expects," "estimates," "plans," "may," "will," or similar terms. These statements appear in a number of places in this Filing and include statements regarding the intent, belief or current expectations of the Company, and its directors or its officers with respect to, among other things: (i) trends affecting the Company's financial condition or results of operations for its limited history; (ii) the Company's business and growth strategies; and, (iii) the Company's financing plans. Investors are cautioned that any such forward-looking statements are not guarantees of future performance and involve significant risks and uncertainties, and that actual results may differ materially from those projected in the forward-looking statements as a result of various factors. Such factors that could adversely affect actual results and performance include, but are not limited to, the Company's limited operating history, potential fluctuations in quarterly operating results and expenses, government regulation, technological change and competition.

Consequently, all of the forward-looking statements made in this Form 10-Q are qualified by these cautionary statements and there can be no assurance that the actual results or developments anticipated by the Company will be realized or, even if substantially realized, that they will have the expected consequence to or effects on the Company or its business or operations. The Company assumes no obligations to update any such forward-looking statements.

General Business Development

The Company was formed on August 4, 2015 in the State of Nevada.

Business Strategy

History - BioCrude Technologies, Inc. (Canada) – [BioCrude Canada]

On October 27, 2008, Mr. John Moukas incorporated, under Canadian Laws, BioCrude Technologies, Inc. (Canada).

On December 15, 2012, BioCrude Canada engaged in an “Agreement for Purchase of Assets and Assumption of Liabilities” with 9175 1925 Quebec Inc., whereby BioCrude Canada has purchased all of the Assets (including assumption of all liabilities – Outstanding Subscriptions) of 9175 1925 Quebec Inc. under the following purchase terms:

The total price paid by BioCrude Technologies, Inc. (Canada) to 9175 1925 Quebec Inc. for all the assets of same was six hundred seventy-five thousand dollars ($675,000).

BioCrude Canada agreed to assume all of the 9175 1925 Quebec Inc.’s Outstanding Subscriptions, totaling six hundred thirty-seven thousand one hundred and twenty-five dollars ($637,125) plus an amount due to Mr. John Moukas, totaling twenty-four thousand six hundred and two dollars ($24,602), and to remit to 9175 1925 Quebec Inc. an amount of thirteen thousand two hundred and seventy-three dollars ($13,273).

The purpose of the transaction was to transfer assets from a holding company into a newly defined and organized federal corporation for the development and operation of waste management services.

Following is a list of assets BioCrude Technologies, Inc. (Canada) purchased from 9175 1925 Quebec Inc.:

11

(“IP and Goodwill / Incubated Works of Lobbying” & Contracts)

Assets:

Ø All intellectual property (fungal technology and integrated systems) as well as knowhow developed and acquired;

Ø All established alliances and clientele base/incubated works (both Local and International);

Ø Goodwill established in the realms of Waste Management via the years of lobbying to different countries worldwide;

Nota Bene -     Mr. John Moukas was 100% stakeholder of 9175 1925 Quebec Inc.

 -      Mr. John Moukas was 100% stakeholder (39,500,000 common shares) of BioCrude Canada.

Engagement Transaction – By and Between the “Company” and “BioCrude Canada”

On December 29, 2015, the Company engaged in an “Agreement for Purchase of Assets and Assumption of Liabilities” with BioCrude Canada, whereby the Company has purchased all of the Assets (including assumption of all liabilities – Outstanding Subscriptions) of BioCrude Canada under the following purchase terms:

The total price paid by the Company to BioCrude Canada for all the assets of BioCrude Canada was 39,500,000 shares of the Company’s capital stock (direction of payment to BioCrude Canada’s respective shareholders) and the assumption of all of the Loans and Convertible Loans of BioCrude Canada, provided that any and all references therein to the rights of the creditors to convert their respective outstanding loan amounts in accordance with the terms of the Convertible Loans and Loans into equity of BioCrude Canada shall be adjusted and amended to reflect these outstanding amounts now be convertible or exchangeable, as the case may be, into the same amount of shares of the Company’s common stock, all on the same terms and conditions set out in the respective agreements. The Company is also obligated to execute all of the “Outstanding Subscriptions” assumed, and issue 669,000 shares of its common stock to the respective Subscribers, respecting the terms, conditions and caveats of the Subscription Agreements, as established, by and between each Subscriber and BioCrude Canada.

The purpose of the transaction was to transfer the assets needed for the Company’s operation into an entity which could be listed on a U.S. stock exchange in order to raise the funds needed for operation in the most uncomplicated way.

Following is a list of assets BioCrude Technologies USA, Inc. (Nevada) purchased from BioCrude Technologies, Inc. (Canada):

(“IP and Goodwill / Incubated Works of Lobbying” & Contracts)

Assets:

Ø All intellectual property (fungal technology and integrated systems) as well as knowhow developed and acquired;

Ø All established alliances and clientele base/incubated works (both Local and International);

Ø Goodwill established in the realms of Waste Management via the years of lobbying to different countries worldwide;

Ø Grande Comore, Union of the Comoros Concession & Power Purchase Agreements.

Nota Bene: On October 9, 2015, the Company issued a combined total of 5,129,490 Class “A” Shares of BioCrude Technologies USA, Inc.’s (Nevada) capital stock as a form of “Gratitude Stock” to 80 beneficiaries (refer to Note 6). Gratitude Stock has been issued by the Company to “Grantees”(beneficiaries), as a form of compensation in lieu of monetary payment for various reasons encompassing the following: services rendered, engagement of services, appreciation of services, appreciation of commitment and continual loyalty of persons to BioCrude, compensation for/of services and/or circumstances, and any and all circumstances related to encouraging, for added value to same, employees, contractors, agents of the Corporation, amongst other persons engaging with the Corporation, whilst sustaining and enhancing the goodwill of the Corporation.

The Company, upon assuming all Loans and Convertible Loans, shall honour any and all terms, conditions, stipulations, caveats, amongst any and all other provisions inherent within the realms of same, and more particularly, the Convertible Loans, if exercised, will be converted at the face value of the stipulations within the contractual engagements.

- Mr. John Moukas owns 38,000,000 common shares of BioCrude Technologies, Inc. (Canada).

- Mrs. Cerasela Tesleanu (spouse of Mr. John Moukas) owns 1,500,000 common shares of BioCrude Technologies, Inc. (Canada) (Mr. John Moukas gifted same to spouse on Dec. 18, 2015 from his original holdings of 39,500,000 common shares).

12

Business Strategy

The Company is a resource management expertise and services provider, catering to commercial, municipal, and industrial customers, primarily in the areas of solid waste management and recycling services.

BioCrude Technologies USA, Inc. has developed efficient, cost-effective, and environmentally friendly products, processes and systems for the reformation of waste material, waste management and creation of renewable energy.

The versatility and potential of the BioCrude Technology has been demonstrated by the many uses that our R & D department has already tested and verified. The avenues they have explored include sustainable and cost-efficient methods that will enlarge composting and biomethanation yields and rates of decomposition while increasing output and providing a higher quality of end product. Their focus is on waste treatment protocols for MSW, cellulose, all organic waste and all manure types; renewable energy sources such as biogas, ethanol and biodiesel; waste water treatment, and multiple other applications.

One very important area that BioCrude Technologies USA, Inc. excels in is the reformation of MSW into renewable energy and marketable end-by-products, using its intrinsic intellectual property and know how in its “Integrated Municipal Solid Waste to Energy Proposed Complexes” for municipal applications. Understanding the non-homogenous nature and characteristics of the waste, we can define distinct processes to optimally handle the procurement of the varied categories of waste (MSW can be classified into organics, fuels, recyclables, inerts and others), once segregated with an efficient separation process and MRF.

The long-term vision of the organization is to build a highly sustainable and profitable company by transforming traditional solid waste streams into renewable resources and marketable by-products. Global competition for limited resources is, the Company believes, creating significant business opportunities for companies that can sustain and extract value in the form of energy and raw materials from resources previously considered an irretrievable waste stream. BioCrude’s business strategy has been firmly tied to creating a sustainable resource management model and the Company continues to be rooted in these same tenets today. Each day the Company strives to create long-term value for all stakeholders: customers, employees, communities, and shareholders, by helping customers and communities manage their resources in a sustainable and financially sound manner.

Environmental issues have taken the forefront globally, creating solid expectations for investments in green technology. The Company will pursue Licensing agreements, Joint Ventures and Revenue sharing agreements for the use, fabrication and sale of the independent products and processes.

The Company intends to achieve successful market penetration in numerous segments of the industry, generating escalating positive cash flows on an annual basis so that the Company becomes a competitive leading participant in the industry. Management will look to have its Integrated Municipal Solid Waste to Energy Complexes widely implemented across Africa, Asia, the Balkans and North America with a view to expanding to other international markets (Latin America), while continuing to pursue Concession Agreements under private license/joint ventures and other conventional arrangements.

Municipal Solid Waste Management is the collection, transport, processing (waste treatment), recycling or disposal of waste materials, usually ones produced by human activity, in an effort to reduce their effect on human health or local aesthetics or amenity.

Municipal Solid Waste is defined to include refuse from households, non-hazardous solid waste from industrial, commercial and institutional establishments (including hospitals), market waste, yard waste and street sweepings. MSWM encompasses the functions of collection, transfer, treatment, recycling, resource recovery and disposal of municipal solid waste.

Municipal Solid Waste Management (“MSWM”) is a major responsibility for local government. It is a complex task which requires appropriate organizational capacity and cooperation between numerous stakeholders in the private and public sectors.

The first goal of MSWM is to protect the health of the population, particularly that of low-income groups. Other goals include promotion of environmental quality and sustainability, support of economic productivity and employment generation.

Waste-to-energy (“W2E”) or energy-from-waste (“EfW”) is the process of creating energy in the form of electricity or heat from the incineration of waste source.

Conventional Municipal Solid Waste Management employs one or more of the following processes:

Ø Waste prevention, including reuse of products

Ø Recycling, including composting

Ø Combustion with energy recovery

Ø Disposal through land-filling

13

 

Landfilling is one of the most common ways of municipal solid waste disposal in developing countries. Air pollutants emitted from landfills contributes to the emission in the atmosphere of greenhouse gases and cause serious problems to human health.

Methane emissions from landfills are a serious environmental global concern, as it accounts for approximately 15% of current greenhouse gas emissions. Landfilling is a significant contributor to greenhouse gas emissions (GHG) accountable for approximately 5% of total GHG releases which consists of methane from anaerobic decomposition of solid waste and carbon dioxide from wastewater decomposition.

The past 20 years has seen a change in how we look at our environment. There has been a greater understanding of the economic, social and environmental risks of not managing waste.

The main drivers of the W2E market are environmental factors, regulations and legislation and economic factors.

Environmental Factors

The Stern report, published in 2006, created an authoritative and eye-opening scientific report on the challenges of climate change. The report highlighted the need to decarbonize the power sector by 60% and reduce CO₂ emissions by 80% of current levels to ensure increases in global temperature do not exceed two degrees Celsius.

Regulations and Legislation

Scientific evidence, public awareness and increased levels of participation in environmental campaigning have led to governments’ worldwide implementing regulations and legislation. Examples include:

· EU Landfill Diversion Directive

· recycling targets

· climate change regulations

Economics

Economic drivers to developing the waste and renewable energy sector have included:

· waste disposal and landfill gate fees/landfill tax

· penalties/avoidance schemes (e.g. landfill allowance schemes and fines, carbon trading)

· energy prices

14

 

Waste to Energy Market Size and Trend

According to the most recent data available from the International Energy Agency, from 2000 to 2006, global waste to energy power production from municipal and industrial wastes increased from 283 terawatt hours to 383 terawatt hours, a 35% increase over that period. SBI Energy’s in-depth analyses of the global market forecasts the market will increase from approximately $9 billion in 2011 to $27 billion by 2021, equivalent to a CAGR of 11%.

 

Source : http://www.waste-management-world.com

15

In the past, MSW management used a single technology landfilling or mass burn, incinerators had no pollution control and energy recovery and sanitary landfills were rare.

MSW management uses more integrated and complex approaches, the waste to energy facilities have minimal environmental burden and the sanitary landfills have requirements for designing operation and monitoring and gas collection.

The provision of municipal solid waste services is a costly and troubling problem for local authorities everywhere. In many cities, service coverage is low, resources are insufficient, and uncontrolled dumping is widespread, with resulting environmental problems. Moreover, substantial inefficiencies are typically observed. Typically, worldwide, governmental waste management ordinance, surprisingly enough, encompasses inefficient waste collection, landfilling until over exhaustion, and incineration.

Out of concern for the quality of life of their residents, local municipalities bear primary responsibility for waste management. Municipalities will work with other municipal levels to identify the best collection, transportation, treatment and disposal methods for their respective jurisdictions. This includes identifying suitable sites for municipal or regional waste management facilities and managing and operating collection, transportation and treatment systems. To increase the environmental and economic efficiency of waste management, local municipalities will be responsible for planning waste management infrastructure and systems at the urban community and regional county municipality levels.

Waste management planning, as well as the production of renewable energy resources, are vital issues facing any city or municipality today. Governments at all levels, on a global scale, are allocating large amounts of funding for development of systems to combat this problem. While certain municipalities have some infrastructures in place for waste collection, they have varying degrees of advancement in the implementation of redirection systems for recoverable and reformable waste products. In essence, room for improvement exists for the following:

1. Reduction, and eventually, the elimination of landfilling, as opposed to over exhausting (substituting proposed landfill sites with other forms of development (commercial, industrial, residential, agricultural, and community developments, amongst others – real estate value)).

2. Reduction of Greenhouse Gases, and environmental pollutants with reference to ground and surface water contamination (percolation of contaminated leachate) alongside with the elimination of odours.

3. Further enhanced separation process for MSW, which could prelude to a more optimal recycling program.

4. Procurement of Renewable Energy and Marketable by-products (fertilizer) from the exploitation of the calorific value of the MSW.

Nota Bene: Landfilling is NOT a solution, but a deferral of a problem for future generation to handle. In essence, it is what it is; a PRACTICE that has been utilized for the longest period of time! Nothing more!

The myth that landfilling is a cost-effective solution is what it is; a myth. There are long term ramifications, especially when the landfills are not proper “Scientific Landfills” (environmental implications; rainfall, leachate, percolation, contamination (soil and water table)). Even the fact that if a Scientific Landfill is deployed (with membrane linings) at an astronomical cost (the cost of construction of a Scientific landfill that will host approximately 2,000 TPD of waste for 25 years is approximately 100 MUSD), after a few earth tremors or shifting of land, the membrane cracks, not mentioning the fact that over time, the membrane deteriorates, thus yielding the same negative environmental impacts, only deferred in time.

Another issue to address is the continual use of landfills. As time goes on, and waste is continuously generated by the populous and its activities, more and more landfills have to be created, to a point where a good part of the country will become a cemetery for garbage.

When a need will arise to reclaim back certain land (certain countries like Pakistan, India, Bangladesh, amongst others have already started requesting proposals for same) from being host to a landfill, the cleansing process for reclamation can cost a minimum of 120 USD/m³ (do the math on a landfill that hosted 1,000 TPD of waste for 25 years, as well as cleansing all other soils to the point of the bedrock, as well as the lateral distance from the perimeter of the landfill).

Remember: the landfill gas (from the organic portion of the MSW) extracted from a landfill is a “mise en cause / consequence”, to landfilling and a onetime event, with the consequence of the balance of the waste left in the landfill. Landfill gas extraction is not 100% efficient, with a certain percentage escaping into the atmosphere and another percentage trapped in pockets of the landfill.

If one was to do a Macro-economic and Cost-Benefit analysis and of same, incorporating all of the aforesaid, especially all of the negative environmental impacts, one would find that a properly engineered solution today outweighs the so-called norm of landfilling by a minimum of 300 to 1 (I did not even incorporate the negative effects to health implications).

16

Large municipalities and metropolitan regions are encouraged to routinely undertake citywide strategic planning to design and implement integrated solid waste systems that are responsive to dynamic demographic and industrial growth. Strategic planning starts with the formulation of long-term goals based, on the local urban needs, followed by a medium- and short-term action plan to meet these goals. The strategy and action plans should identify a clear set of integrated actions, responsible parties and needed human, physical and financial resources. Opportunities and concepts for private sector involvement are commonly included among the examined options, as the private sector’s costs and productivity output require special consideration.

BioCrude, having set as its objective the profitability of the activities issued of this sector, while building business relationships and social implications within the collectivity’s / communities that BioCrude is called upon to serve, beyond the environmental and social implications, and beyond the business imperatives, has set as one of its priorities to optimize waste management and treatment thereof, whilst respecting the boundaries of economies, efficiency and adherence to environmental wellbeing initiatives. BioCrude Technologies USA, Inc. has been involved in the R&D of Environmental Technologies, both process and product based, whereby it has enhanced and optimized conventional Technology, whereby giving credence to environmental, economic, social and technological well-being, too numerous to mention, and as all can be referenced in its entirety within BioCrude’s Integrated MSW-Energy Proposal. Shortlists of the aforesaid well-beings are mentioned herein under:

1. Secure, cost effective long-term processing capacity for recyclables and organics.

2. Improvement of effectiveness and efficiency of current waste systems/practices.

3. Elimination of MSW from going to landfills.

4. Creation of Renewable Energy (dependent on the amount of MSW, and calorific value (energy content) of the MSW).

5. Reduction of Greenhouse Gases and other environmental pollutants emitted into the atmosphere.

6. Municipalities do not have to undergo cost of implementation; privatized via BOOT (Build, Own, Operate & Transfer), whereby BioCrude Technologies USA, Inc. will be lobbying to get the MSW, Land, Sewage treated Effluent and Resale of Electricity Concessions (with Sovereign Guaranties from the Ministry of Finance of the Government in question).

7. Due to the profitability of the proposal, significant savings could be passed onto the Municipalities, to reduce their day to day on going expenses for Municipal Waste Management, for the duration of the BOOT (30 years), of approximately 50%, per annum, via MSW Tipping Fees and the Transport of the MSW to neighboring cities/provinces (states) and/or countries without forgetting to mention the reduced GHG emissions from the substitution effect of BioCrude’s Integrated MSW to Energy proposal from landfilling and/or incineration. This surplus in savings can be used for other municipal social and infrastructural programs.

8. Employment opportunities are created during the EPC (Engineering, Procurement & Construction) phase of the project (a few hundred jobs) and for the day to day operations of the project (approximately 44 jobs per shift per 600 TPD Plant plus 10 persons for administration X 3 shifts per, equating to a total quantum of a minimum of 141 persons).

9. The proposed solution is an integrated MSW management system based on energy recovery that respects the norms of a Clean Design Mechanism (“CDM”) inherent within the realms of article 12 of the Kyoto Protocol (“UNFCCC”) or any future proposed legislation regarding same and qualifies for Carbon Emissions Reduction Credits (“CER’s”).

We firmly believe that our products and processes are viable, beneficial, and cost-effective ingredients in any Residual (Waste) Management Plans or Systems of implementation. Our technology is easily scalable and can be customized for all individual needs.

To further put things into perspective, I would like to address the following: we are addressing the Municipal Solid Waste (MSW) issues and same is not a homogenous feedstock (cute waste). There are different types of waste (MSW, agricultural, sewage sludge, toxic waste, tires, automotive shredded refuse and medical waste, amongst others). Each type of waste requires a treatment process, tailor made to optimally treat same in an environmentally benign manner. BioCrude’s proposal is geared to remedy the Municipal Solid Waste (MSW) generated on a day to day basis.

Understanding the non-homogenous nature and characteristics of the waste, we can define distinct processes to handle the varied categories of waste, once segregated with an efficient separation process. BioCrude stands out from the competition in its knowhow, composting and fungal technologies, in order to maximize the outputs of procurement, as well as minimize actual energy inputs with respect to the ongoing concern of MSW-Energy procurement process complex.

17

Municipal Solid Waste

All solid waste generated in an area except industrial and agricultural wastes, typically from residences, commercial or retail establishments. Sometimes includes construction and demolition debris and other special wastes that may enter the municipal waste stream. The EPA (1998c) defined municipal solid waste as "a subset of solid waste and as durable goods (e.g., appliances, tires, and batteries), non-durable goods (e.g., newspapers, books, and magazines), containers and packaging, food wastes, yard trimmings, and miscellaneous organic wastes from residential, commercial and industrial non-process sources.

The MSW can be classified in the following categories:

a) Organics

b) Fuels

c) Recyclables

d) Inerts

e) Miscellaneous

Each category has its own distinct composite classification. To achieve an optimal Waste to Energy procurement, one has to analyze separately the inherent category contributions to energy yield and its correlated technological process of extraction in obtaining same in the most economical sense available; thus, the importance of segregating the MSW into the appropriate categories of distinct feedstock is of principal importance for optimal performance in the appropriate technological processes.

In BioCrude’s MSW-Energy initiative, BioCrude Technologies USA, Inc. incorporated the following technologies in the Integrated Municipal Waste Processing (Waste to Energy) Complex in order to optimize the treatment process in an environmentally friendly manner by whilst optimizing the Revenue Model of same, and in turn, pass some of the savings back to the municipalities while still earning an impressive bottom line in juxtaposition to what the competition has to offer with regards to landfilling and incineration:

1. Separation of Waste Facility (Materials Recovery Facility)

2. Refuse Derived Fuel (“RDF”) Plant in order to handle the fuels of the MSW and produce Energy with an ash by-product

3. Bio-Methanation Plant in order to handle the organic fraction of the MSW (OFMSW) to produce Energy with a fertilizer by-product

4. Composting Facility (maximum 50 TPD) in order to handle a percentage of the OFMSW alongside with the small particles (plastics, ceramics...) that could not be efficiently separated within the separation process of the MSW (fuels in the Bio Methanation plant (plug flow digester) inhibit the process). The economies are no longer apparent in Composting facilities surpassing the 50 TPD capacities.

5. Power Plant

With BioCrude’s Integrated MSW to Energy proposal/initiative, BioCrude attempts to service each category of the MSW in order to optimally utilize all renewable resources from same to procure renewable energy and marketable by-products (fertilizer, ash, etc.).

It is very important to note that the Separation Process of the MSW into the appropriate feedstock categories for each distinct process (organics for biomethanation (as well as for composting), and polymer based hydro-carbons and cellulose based products for RDF process) is of the utmost importance. Failure to do so can lead to complications and inevitable failure of each process in question. Evidence of Success and failure stories (especially with biomethanation plants, whereby the feedstock generated from MSW (organic fraction) had traces of more than 10% of polymer based products and/or inerts, thus inhibiting and/or limiting the viability of same) as can be found all over the world, and each outcome, in essence, can be summarized by Plant Technology Implementation and Feedstock Preparation (do not mix up technology viability with technology implementation and operation).

Nota Bene: With gasification and/or incineration (mass burn), MSW is dumped into the boiler “as is” and combusted at temperatures ranging from 800 – 1200⁰C (minimum; plasma arc gasification temperatures range from 7,000 – 10,000⁰C). All waste is burned yielding an approximate net yield of energy for reuse (after self-consumption) of 30 – 40%. The organic fraction of the MSW (OFMSW) is burned, whereby the fertilizer potential via a biomethanation process (cooking) is substituted for an ash from the gasification/incineration process(es). Let us not even entertain what happens to the methane potential of same via gasification/incineration in lieu of biomethanation; LOST! Bottom line, “Potential Revenues” lost and operational costs of gasification/incineration processes are increased dramatically, up to the point where one has to substitute more energy (fuel) in order to sustain continuity of operation and/or to substitute the self-consumption energy requirements of the processes when the varying calorific value of a sample of the waste is deficient for same. One can do their own sensitivity analysis to evaluate same and come to their own conclusions! BioCrude’s Integrated MSW-Energy Solution evolves from first principles of Science, Chemistry, Engineering, Economics and Common Sense!

18

The Organics portion of the MSW is treated via a biomethanation process, whereby all methane gas is extracted for the eventual realization of renewable energy creation, and a fertilizer procured as an additional by-product, which can be marketed to the agricultural industry.

The polymer-based (hydro-carbon chain), cellulose and textiles portion of the MSW will be treated via an RDF process (a derivative of gasification, but with the incorporation of a Materials Recovery Facility (MRF) [Separation process], where we have the luxury of operating at lower temperatures (350 – 400⁰C) because of the separation of the MSW, i.e. lower temperatures reflects less operational self-consumption, hence more outputs (energy) for resale), whereby the thermal combustion will generate renewable energy and the by-product of ash can be marketed to the construction industry for the following purposes:

· Concrete production, as a substitute material for Portland cement and sand

· Embankments and other structural fills (usually for road construction)

· Grout and Flowable fill production

· Waste stabilization and solidification

· Cement clinkers production - (as a substitute material for clay)

· Mine reclamation

· Stabilization of soft soils

· Road sub base construction

· As Aggregate substitute material (e.g. for brick production)

· Mineral filler in asphaltic concrete

· Agricultural uses: soil amendment, fertilizer, cattle feeders, soil stabilization in stock feed yards, and agricultural stakes

· Loose application on rivers to melt ice

· Loose application on roads and parking lots for ice control

· Other applications include cosmetics, toothpaste, kitchen counter tops, floor and ceiling tiles, bowling balls, flotation devices, stucco, utensils, tool handles, picture frames, auto bodies and boat hulls, cellular concrete, geopolymers, roofing tiles, roofing granules, decking, fireplace mantles, cinder block, PVC pipe, Structural Insulated Panels, house siding and trim, running tracks, blasting grit, recycled plastic lumber, utility poles and cross arms, railway sleepers, highway sound barriers, marine pilings, doors, window frames, scaffolding, sign posts, crypts, columns, railroad ties, vinyl flooring, paving stones, shower stalls, garage doors, park benches,

The fly ash can also be marketed to the agricultural industry for the following purposes:

· It improves permeability status of soil

· Improves fertility status of soil (soil health) / crop yield

· Improves soil texture

· Reduces bulk density of soil

· Improves water holding capacity / porosity

· Optimizes pH value

· Improves soil aeration and reduces crust formation

· Provides micro nutrients like Fe, Zn, Cu, Mo, B, Mn, etc.

· Provides macro nutrients like K, P, Ca, Mg, S etc.

· Works as a part substitute of gypsum for reclamation of saline alkali soil and lime for reclamation of acidic soils

· Surface cover of bio reclaimed vegetated ash pond get stabilized and can be used as recreational park

· Ash ponds provides suitable conditions and essential nutrients for plant growth, helps improve the economic condition of local inhabitants

· Works as a liming agent

· Helps in early maturity of crop & improves the nutritional quality of food crop

· Reduces pest incidence

· Conserves plant nutrients / water

There is a definite market for the fly ash by-product; the industry players in the global market place have to be clearly identified for the realization of commercialization. BioCrude can even offer this ash by-products pro-bono to the industry or landfill, for there is no environmental hazard of same.

The recyclables can be easily sold to the recyclable industry milieu (metals, glass, ceramics, etc.)

19

The balance of the inerts (Construction and Demolition Debris, gravel, sand, bricks, etc.) can either be landfilled with no negative environmental impacts or crushed and given to companies specializing in the fabrication of construction materials (if a market is identified, BioCrude can offer them these by-products (crushed or uncrushed).

BioCrude’s Integrated MSW to Energy Complex for Municipal Applications

BioCrude’s solution of an Integrated Municipal Solid Waste to Energy complex is in line with the present trends in the Municipal Solid Waste (“MSW”) industry and the main advantage of same is that it is comprised of a Materials Recovery Facility (“MRF”) and different modular waste treatment processes (Composting, Bio-methanation and Refuse Derived Fuel (“RDF”)) and a power station, in order to treat the MSW and procure renewable energy and other marketable by-products (compost, ash and certain recyclables) with the added implication of practically zero-landfill policy (less certain inerts which have zero negative environmental impact, if landfilled).

The material components (modules) of an Integrated Municipal Solid Waste to Energy Complex are detailed as follows:

1. Entrance to complex: Kiosk and weighbridge (reception/departure and weighing of garbage trucks (pre-and-post deposit of MSW at the MSW Storage facility).

2. MSW Storage facility: Closed and properly ventilated warehouse facility for receiving and storing just in time (JIT) 3 days’ inventory of MSW. MSW is moved from the storage facility and moved via machinery and conveyor belts to the Materials Recovery facility.

3. Materials Recovery facility (MRF): a properly ventilated facility that houses different types of machinery/equipment (either procured from suppliers or built in-situ according to plan specifications) requisite for different facets of the separation process of the MSW into the distinct categories of the waste (organics, hydro-carbon polymer based, cellulose, inerts, miscellaneous (batteries, cadavers, etc.…)) and prepare same as the distinct feedstock for the different waste treatment processes (Composting, Biomethanation and Refuse Derived Fuel (RDF)), as well as separate the recyclables for resale and the inerts (elements of construction and demolition debris that are not recyclable) for landfilling or to be crushed and given/sold (negligible in nature in comparison to the revenue model established by the tipping fees, and resale of electricity and compost) to the secondary markets for the manufacturing of building materials.

4. Composting facility: A portion of the land concession will host a type of composting system (Windrow [with procured mechanical mixing machinery (trucks) like compost turners or tub/horizontal grinders] or Static Aerated Piles [aeration system such as installed perforated piping to ensure steady oxygen supply (forced air) for the microorganisms and to reduce moisture content]), depending on BioCrude’s evaluation of the waste analysis. A fertilizer will be procured, dried and stored in a warehousing facility for by-products.

5. Biomethanation facility: Modular digesters are constructed in series and synchronized in operation in order to receive organics and process same to extract and capture the methane gas which will be piped to the Biogas – RDF power plant (will be combusted for the procurement of renewable energy) and in addition, yield a cured fertilizer which will be dried and stored in the warehousing facility for by-products.

6. RDF facility: A refuse derived fuel system (gasification derivative) will be procured and installed. The RDF facility will receive the hydro-carbon polymer and cellulose based waste products that will be used to make RDF pellets (compressed and dried) that will be used as the feedstock for combustion within same to generate renewable energy within the Biogas – RDF power plant.

7. RDF – Biogas power plant: will be procured and installed within a certain section of the Complex with a dedicated Distributed Control System (DCS) for the MSW-Energy (RDF & Biogas based) power plant & fuel processing plant (controls & instrumentation for the boiler and turbine, instrumentation for the balance of the power plant and control room).

8. Internal roads: will be constructed within the complex for vehicle/truck transport/passage within the complex.

9. Green Belt: will be developed for aesthetic purposes and municipal environmental conformities.

20

 

Business Model

The Company’s business model is designed to create a profitable revenue stream through the direct acquisition of Concession Agreements from different Governments for the implementation of BioCrude’s integrated MSW-Energy Complexes. Our products, processes and services, marketed to the relevant target audience, enable us, to generate multiple revenue streams and consistent profitability derived from the high gross profit inherent within the realms of our proprietary products, services and applications.

By acquiring the necessary Concession (MSW, Land and Supply of Treated Effluent) and Power Purchase Agreements (PPA), from the respective governmental authorities of a certain country, with Sovereign Guarantees (with right of subrogation), the Company will develop its Integrated Municipal Solid Waste to Energy Complex, under “BOOT” (Build, Own, Operate & Transfer) basis.

The following contractual understandings are the key prerequisite elements for establishing a mutual meeting of the minds, by and between BioCrude Technologies USA, Inc. and the governmental authorities of a municipality/country, for the successful realization of BioCrude’s MSW-Energy Complexes:

1. MSW Concession for the guaranteed delivery of MSW to the Complex with an implied base tipping fee per tonne (“Put or Pay”) with annual escalations for the term (30 years) of the project with an option of renewal for an additional term (30 years) and Sovereign Guarantees from the Minister of Finance endorsing same.

2. Land Lease Concession for the delivery of the required amount of land for project term (30 years), at an annual symbolic lease rate of $1/amount of land delivered/annum, with an option of renewal for an additional term (30 years).  

21

3. Supply of Treated Effluent Concession whereby the governmental authorities will supply the necessary treated water in order to fulfill the operational requirements of the MSW to Energy complex at a negligible symbolic annual rate for the term of the project with an option of renewal for an additional term (30 years).

4. Power Purchase Agreement (PPA) [resale of procured electricity to the Power Corporation of the country in question], whereby the Power Corporation of a certain country will buy back the electricity produced by the MSW to Energy Complex at a base rate per kW-hr (“Take or Pay”), with annual escalations for the term (30 years) of the project with an option of renewal for an additional term (30 years) and Sovereign Guarantees from the Minister of Finance endorsing same.

5. Assistance from the Appropriate Governmental Ministries and Municipalities in obtaining all necessary permits and clearances for the Construction and Operation of the MSW-Energy Complex (stipulations in contracts).

Nota Bene: Depending on country policy on foreign investment, the Company may request or be granted an exemption of taxes, levies, duties and all other relevant taxes applicable to the importation of all plant, materials, equipment and rolling stock for the Construction of the MSW-Energy complex, from the appropriate Ministries, related thereto.

All of the aforesaid Concession agreements have to be granted at the same time in order for BioCrude to successfully realize the development (Engineering, Procurement and Construction) and operation of the MSW to Energy complex (the “Sovereign Guarantees” and right of subrogation are critical and paramount for the funding requirements of the MSW to Energy complex).

Target Market

The global Waste to Energy segment of the waste management industry is the target market BioCrude addresses. Management is confident it will succeed in having its integrated systems and processes widely implemented across Africa, Asia, the Balkans, the GULF and North America with a view to expanding to other international markets (Latin America). The Company’s first step in penetrating its target market has been taken with the signing of Concession Agreements with the country of the Union of the Comoros (Autonomous Island of Grande Comore); signed January 11, 2016.

Strategies of the Company

BioCrude’s strategy is designed to create a profitable revenue stream through the direct acquisition of Concession Agreements from different Governments for the implementation of BioCrude’s integrated MSW-Energy Complexes, or through the establishment of unique and strategic alliances via licensing arrangements and/or joint ventures within the industry milieu.

BioCrude has developed what we believe is a highly effective marketing strategy, built on a proactive direct marketing campaign with Government, large corporate facility management that target the sector for waste product treatment and reformation. The Company believes that this will result in a development of a marketing and distribution network with extensive coverage of the Company’s target market at a minimal expense, allowing the Company to reach profitability. We believe that our marketing strategy will permit us to generate an extensive customer/end user base; however, there can be no assurance that our estimate regarding acceptance of our products and services will be correct.

The Company's long-term strategy is to create economically beneficial uses for waste streams through resource transformation solutions. Since the value of commodities after processing costs is typically higher than other disposal options, such as landfilling or incineration, the Company believes this strategy is effective long-term. The Company believes that as carbon taxes or cap and trade systems are implemented and the demand for commodities rises, economics will further favour this strategy. The Company is also focusing on lowering the cost of resource transformation solutions by reducing its recycling processing operating costs, examining ways to mitigate commodity price fluctuations, and developing new processing technologies. These steps will help to build an effective business model at lower commodity pricing levels.

The Company is focused on four main areas to improve the performance of base operations and increase cash flow generation:

1. Pricing initiatives

2. Cost controls and operating efficiencies

3. Integrated waste to energy development initiatives with long term Concession Agreements

4. Asset management

22

Prior Activities of BioCrude Canada

Within certain countries, if an entity wants to pursue certain specialized works, it is recommended that the entity establish a presence within same (establish a corporation with a civic address). As an example, in 2009, this was done in Romania with the anticipation that BioCrude Canada would be successful in acquiring the concession agreements from the governmental authorities of Romania. BioCrude was not successful in meeting its objective in Romania for same and stopped its lobbying works for the pursuit of said engagement by and between the Governmental authorities of Romania and BioCrude for the implementation of BioCrude’s proposed MSW to Energy complex in Romania, closed its preliminary office and the corporation became dormant.

Since July 2008, BioCrude Canada has taken the initiative to market and promote its intellectual property and specialized technical expertise throughout the market place, both nationally and globally (we have introduced our technology to Governments and major Conglomerates in the Waste to Energy sector) in over 30 Countries worldwide, whereby BioCrude has successfully opened up dialogue with Governmental Authorities and respectable corporations for near future contractual negotiations.

In December, 2007, Jaipuria Advanced Technologies, Inc. (http://www.jaipuria-group.com and http://www. smvjaipuria.com/waste.php) of India, and BioCrude Canada, announced their formation of a new division dedicated to Waste Reformation and Energy Procurement for the purpose of pursuing contracts in India. In many areas of the country, waste management and energy shortages are a serious problem. With Jaipuria’s construction and large project experience, and with the use of the intellectual property supplied by BioCrude in terms of waste management and production of renewable energy, we have, in January, 2008, submitted a bid, in response to a tender for a Waste to Energy plant (2,000 TPD) in Okhla and Tymarpur, India (we were not the selected candidate) and Indore, India (Collection and Treatment of municipal waste; 600 TPD; we were not the selected candidate). 

During this time, we have also negotiated with “Pepsi Co India” to build a 50 TPD prototype in the city of Panipat, India, in a strategic joint venture alliance. A few months later, Pepsi Co India’s New President/CEO had a change of corporate venue and put aside the Waste to Energy initiative. Ever since then, BioCrude Technologies, Inc. (Canada) decided not to pursue any more works in India.

Website

The Company has acquired the website (and domain name) of BioCrude Canada: http://www.biocrudetech.com. In October 4, 2017, BioCrude officially launched (via an e-newsletter) its newly developed, up to date, dynamic and fully informative website (web portal). The website also discloses all corporate particulars and filings in the “Company” and “Investors Relations” index tabs, respectively, as well as exhibiting “Company News” and “Press Release” sections, depicting the current affairs of the Company.

Pricing initiatives

BioCrude has developed a number of sales/solicitation programs and the standardization of the sales/solicitation process and standardized the sales/solicitation process. We believe that the pricing logic used in our fee programs, with implied “Put or Pay” and “Take or Pay” provisions for the supply of feedstock and resale of outputs (renewable energy), respectively, is reasonable and competitive. We expect to continue to add to our fee-based pricing through additional administrative fees, recycling fees, late charges and further improvements to our existing fee structures. The goal of our pricing program is to generate price increases in excess of CPI. BioCrude will derive revenues from a combination of commodity sales (Marketable by-products – fertilizer and energy resale), carbon credits (CER’s under the “Clean Development Mechanism” established pursuant to article 12 of the “Kyoto Protocol” (CDM project)) and tipping fees paid for material processing. Fluctuations in commodity pricing are managed by a number of risk mitigation strategies including: financial hedging instruments (transfer of foreign exchange risk), Sovereign Guarantees, floor prices, forward sales contracts, index purchases, and tipping fees. The goal is to smooth revenue, net of cost of products purchased, and generate consistent cash flows.

Cost controls and operating efficiencies

The Company continues to search for the best practices throughout the entire organization and then implements these solutions through standardized continuous improvement programs. The goals of these programs are to enhance customer service, increase safety for employees, and to reduce operating and administrative costs. The Company has implemented continuous improvement strategies and the introduction of select operating efficiency initiatives in safety, productivity, maintenance, customer service, environmental compliance, and procurement.

Integrated Waste to Energy development initiatives with long term Concession Agreements

BioCrude excels is the reformation of MSW using its intrinsic intellectual property as well as its expertise in Integrated Waste to Energy Processing Complexes. BioCrude has and will continue to invest time, effort and valuable resources in the pursuit of Governmental Concession (MSW, Land, Supply of Treated Effluent and Power Purchase Agreements (PPA)) Agreements, for the duration of twenty-five to thirty years, for the implementation of same. The essence of the Concession Agreements, not only guarantees the MSW and implied tipping fees, related thereto (with annual indexing), but the resale of the marketable by-products (energy to grid via PPA) for the duration of the term, with Sovereign Guarantees. Investments in Waste to Energy facilities position the Company well for the evolution of the industry from waste management to resource management.

23

Company milestones and plan of execution

BioCrude’s revenue model is based on revenue generation from the following: i) the operation of the MSW to Energy complexes (tipping fees, resale of renewable energy, resale of other marketable by-products (compost, recyclables) and potential carbon credits, ii) Joint Venture license fees, whereby the prospective Joint Venture partner will buy a license from BioCrude (payment to be effected immediately after signature) for their participation and will infuse its prorated share of equity capital for the potential MSW to Energy complex, and iii) EPC (“Engineering, Procurement & Construction) management fees (general contracting fees, approximately 20% of the capital cost of the project). In essence, these fees have to be paid regardless, but BioCrude management will execute and capture remuneration for same.

BioCrude’s MSW to Energy initiative is, by definition, an “en suite” of waste management and energy procurement, whereby the latter is a marketable byproduct derived from the intrinsic processes of the treatment of the MSW by procuring the necessary constituent feedstock (primary material) to produce the renewable energy in the modular section for power generation of the Integrated MSW to Energy complex. In order to realize an integral MSW to Energy complex, as defined in the “Business Model” of the registration statement, all Concession Agreements (guarantee of MSW supply, Land and Supply of Treated Effluent) as well as a Power Purchase Agreement must be contracted concurrently, for they are “ALL” necessary constituent elements for the development of an integrated MSW to Energy complex i.e., you cannot have some or most of the agreements (Concessions/PPA) in place, but must have “ALL” in place, at the same time, simply because of the nature of the project in question.

In order to acquire the concessions for waste management (MSW to Energy), “major” lobbying has to be done, commencing with proposal submissions to various divisions of government which are intervening parties to same (environmental project thus requiring the intervention of the Ministry of Environment, energy procurement require the intervention of the Ministry of Energy/Power and Power Corporation (usually crown corporation), the municipalities usually are responsible for the granting of the MSW, Land and Supply of Treated Effluent Concessions and the Ministry of Finance is responsible for the signing of the Sovereign Guarantees, and in some instance, countries might have other intervening governmental agencies).

BioCrude has positioned itself, through its continual lobbying efforts (ongoing), for potential Joint Ventures (JV) with certain governments (countries/clients). Should any of these Joint Ventures prove to be realized because of the persistent lobbying activities, not only will BioCrude be able to realize the EPC management fee for the development of the MSW to Energy complex(es), but it will also receive its prorate share (50%) of the revenue stream of the developed MSW to Energy complex(es), with similar time frame frequencies as mentioned above, as well as a license fee (BioCrude already submitted offers) immediately following signature of the Joint Venture engagement and the Concession and Power Purchase agreements. BioCrude anticipates, that if the prospective JV partner(s) take the initiative to implement (not only entertain) a waste management solution for their country, possible engagement can be realized within 6 to 12 months following that initiative (being cognizant of bureaucracy and red tape procedures of government).

A vote of confidence has been bestowed to BioCrude by the governmental authorities of the Autonomous Island of Grande Comore on its proposed integrated waste management solution for the Autonomous Island of Grande Comore through the awarding of the necessary Concession Agreements (delivery of MSW, Land and Supply of Treated Effluent) for 30 years (with a renewal option of 30 years) with Sovereign Guarantees for the implementation (design, build, finance and operate) of a 700 TPD Municipal Solid Waste to Energy Complex, in the city of Moroni, Autonomous Island of Grande Comore, Union of the Comoros. Furthermore, a Power Purchase Agreement has been signed with the “Le Gestion de l’Eau et de l’Électricité aux Comores (MA-MWE)” whereby same will buy back all procured renewable energy from the MSW to Energy complex for the term of the Concessions (and renewal option).

BioCrude, subject to its contractual engagement with the Government of the Autonomous Island of Grande Comore for the implementation of a MSW to Energy complex in Moroni, Grande Comore, through the financing provisions of the MSW to Energy project, will earn the EPC management/general contracting fee of approximately 20% of the capital cost of the MSW to Energy project (prorated over the duration of the construction period), i.e., commencing within 6 to 8 months from these presences. BioCrude, is looking at approximately 24 to 26 months (development time frame for the realization of MSW to Energy complex) before it can start generating revenues from the operation of the MSW to Energy complex (tipping fees, resale of renewable energy, resale of compost and carbon credits) servicing the waste management needs of the Government of the Autonomous Island of Grande Comore, as per the provisions and stipulations of the contractual engagements with same (with implied sovereign guarantees), for a minimum guaranteed term of 30 years.

BioCrude is evaluating its options for funding (capital markets, financial institutions, contracting companies, pension funds, etc.…amongst other financially engineered hybrid scenarios thereof) and has already opened up dialogue regarding same. It is anticipated that within an estimated time frame of six to eight months, BioCrude can anticipate a term sheet for prospective funding of the MSW to Energy project, ergo BioCrude will be able to commence works for ground breaking and start receiving its EPC management fee as its first projected revenue stream on a prorate schedule subject to a disbursement schedule in accordance to the terms and stipulations of the expected offer of funding.

24

Hereunder is a schedule of events (agenda) for the realization (full execution) of the MSW to Energy project in Moroni, Autonomous Island of Grande Comore (inclusive: contract realization process), in order for BioCrude to start realizing revenues as an ongoing concern, not considering any prospective joint ventures in the works.

Different facets and schedule of events for the pursuit and realization of MSW to Energy projects (excluding lobbying activities)

Contract Conclusion, Engineering, Procurement& Construction

A.  Signature of the following Accords necessary for the realization of the MSW-Energy Complex in Moroni, Autonomous Island of Grande Comore

1. Deed of Assignment Agreement ("Protocol of Engagement") by and between the Government of the Autonomous Island of Grande Comore and BioCrude Technologies USA, Inc. Contract was signed January 11, 2016.

2. The signing of the Concession Agreement for the Municipal Solid Waste, Land Lease Agreement and Agreement for the supply of treated Municipal Water on January 11, 2016

3. The signing of the Power Purchase Agreement (PPA) with the “Le Gestion de l’Eau et de l’Électricité aux Comores (MA-MWE)” [ Power Corporation of the Autonomous Island of Grande Comore] on January 11, 2016

4. Opening of a new Comorian Corporation (in the country in question) totally owned by BioCrude Technologies USA, Inc., opening of bank account and execution of all party obligations contained in the Deed of Assignment. This was done on January 12, 2016

5. Reception of letter from new governmental administration of the Autonomous Island of the Grande Comore (after elections on May 2016) reaffirming their initiative and will to fully respect and execute the engagements signed on January 11, 2016; August 25, 2016

6. Site selection (site Identification and legal designation (Cadastral, Lot, etc. ...)) for the MSW-Energy Complex, preparation of legal documents to annex same to the Land Lease Agreement and Assignment of selected parcel of land to BioCrude, as per the stipulations of the Land Concession agreement on November 12, 2016.

7. Incorporating agreed to amendments and/or modifications to the contractual engagements of January 11, 2016 into the new agreements replacing those of January 11, 2016: December 9, 2016.

8. Granting of a Treasury Guarantee to BioCrude from the governmental administration of the Autonomous Island of the Grande Comore, as per the stipulations of the Concession and Power Purchase Agreements: December 10, 2016

(Fully executed; timeline: it took approximately 14 months)

B. Organizational Matrix: Construction, Management, Operations and Maintenance of Project

1. Flowchart of management staff

2.	Organization of the Waste Management (Collection, Transportation, Sorting and Treatment)
3.	Flowchart of Engineering, Procurement and Construction

4. Flowchart of Operations Complex and Maintenance

5. Flowchart for the influx of feedstock and the out flux (distribution) of by-products

(Fully executed; timeline: The tasks identified above in B are part and parcel of the submitted preliminary proposal, which included the “Prefeasibility Study & Detailed Project Report” and the “Business Plan (with financial metrics)”, to the Governmental Authorities of the Autonomous Island of Grande Comore (September 2015) for the realization of the Concession and Power Purchase Agreements in accordance to the provisions of the Deed of Assignment pursuant to a Public-Private Partnership (PPP)).

25

C. Project implementation plan for the Integrated Municipal Solid Waste to Energy Complex

1. Opening of the office in Moroni, Autonomous Island of Grande Comore: expected completion date January 2019

2. Recruitment and training of human resources in Moroni, Autonomous Island of Grande Comore (for engineering, management, operation and maintenance): expected completion date February 2019 (preliminary core)

3. Recruitment of human resources in Canada (for key management positions): expected completion date January 2019

4. Preliminary Engineering: completed in preliminary proposal (generic)

5. Analysis of Municipal Solid Waste: expected completion date February 2019

6. Study of the site and soil studies: expected completion date March 2019

7. Detailed Engineering plans: expected completion date March 2019

8. Detailed plan of the development strategy of the complex: expected completion date March 2019

9. Hiring of project manager(s) and subcontractors (either through reference or through tender): expected completion date January 2019

10. Recruitment of Material and Equipment specialist suppliers, via reputation in the market place or tender: expected completion date January 2019

(Timeline: 6 to 8 months from time = present)

D. Human Resource List for Project Implementation

1. Project management

2. Civil Engineers

3. Structural Engineers

4. Electrical Engineers

5. Mechanical Engineers

6. Environmental Engineers

7. Geological Engineers

8. Designers

9. Architects

10. Planners

11. Buyers

12. Supply Agents

13. Cost Controllers

14. Training Coach

(Timeline: 4 to 8 months from time = present)

26

E. Development and implementation of the EPC project guide (Engineering, Procurement and Construction)

1. Program Implementation Plan (Project Execution Plan "PEP") Completed

2. Preparation of studies and preliminary engineering plans Completed

3. Preparation of studies and detailed engineering design 3 months following task D

4. Planning and timetable for the project (Gantt Chart) 3 months following task D

5. Obtaining permits and governmental approvals and clearances for the construction and operation of the complex 2 months following submission of detailed engineering plans to the related Governmental Agencies of the Autonomous Island of Grande Comore (timeline provision in agreements and signed off by the Governmental Authorities of Grande Comore)

6. Construction 10 to 14 months following the execution of E.5. above incorporating a startup synchronization period of approximately 1 to 2 months

7. Operation and Maintenance Complex NA for Development timeline

 F. Project Management and Control: Project Implementation Plan (PIP)

1. A preliminary feasibility study and a detailed report of the complex Completed

2. Strategic planning and economic analysis Completed

3. The selection of the field Completed

4. Preliminary engineering Completed

Ø Economic analysis and project risks

Ø The estimate of the total capital investment as well as operating and maintenance costs

Ø The preliminary assessment of environmental impact and permitting requirements

Ø The technology research, analysis and conceptualization

5. Reliability analysis Completed

6. The technology selection, project configuration and sizing Concurrently with task E.3. and its timeline

7. The studies and engineering plans for the environmental permitting Concurrently with task E.3. and its timeline

8. Research Techniques Concurrently with task C and its timeline

9.	The strategy and planning for the reduction of emissions of greenhouse gases (GHG) Concurrently with task C and its timeline
10.	The preparation of the Clean Design Mechanism documents for submission to the CDM program (literature and the detailed report for project compliance with the standards and requirements established by the UNFCCC) Concurrently with task C and its timeline

11. Carbon capture and storage Concurrently with task C and its timeline

12. The carbon credit analysis Concurrently with task C and its timeline

13. Energy efficiency Concurrently with task C and its timeline

14. The analysis of the applicable regulations Concurrently with task C and its timeline

15. The economic and financial analysis (Business Plan) for the preparation of the application for funding Completed; we have already opened up dialogue with an EPC firm for not only engaging same for the EPC works, but also financing same under the proviso of BioCrude subrogating its right to the Sovereign Guarantees; awaiting proforma proposal from EPC firm

27

16. The selection for the companies to carry out the civil works, and procure materials and equipment required for the development of the project (initiate works) Completed; we have already opened up dialogue with an EPC firm for not only engaging same for the EPC works, but also financing same under the proviso of BioCrude subrogating its right to the Sovereign Guarantees; awaiting proforma proposal from EPC firm

17. The management and supervision of the project 10 to 14 months; duration of EPC works

18. The operation and maintenance of the MSW-Energy complex NA for Development timeline

19. The invoice, receipt and payment collection NA for Development timeline

20. Organization of briefings to the public NA for Development timeline

G. Environmental Impacts Analysis

The Evaluation Process:

1. The assessment of critical elements used in the development of the project, emissions harmful to the environment, leaching into soil, drainage, etc.…

2. Potential erosion, the effects of the use and release of public waters on the tributaries, the adjacent ecological systems to the site, etc.…

3. The number of vehicles (trucks, cars, etc.…) and emissions of pollutants

4. The energy used in the complex and cooling of various buildings

5. Materials used for the manufacture of the floor

6. Building materials used for roofs

7. Management and treatment of municipal solid waste (MSW)

8. The quality of water and air

9. The negative environmental impacts and mitigation, thereof

10. Analysis of existing site and the impact of adverse effects thereon, for the development of the MSW-Energy complex so as to minimize the impact thereof

11. Effect of development on sensitive regional systems sent by either air or by ground water systems

(Fully executed; timeline: Part and parcel of the submitted preliminary proposal (“Prefeasibility Study & Detailed Project Report” incorporating an “Environmental Impact Analysis”) to the Governmental Authorities of the Autonomous Island of Grande Comore for the realization of the Concession and Power Purchase Agreements in accordance to the provisions of the Deed of Assignment pursuant to a Public-Private Partnership (PPP); the Environmental Impact Analysis was acceptable to the Governmental Authorities of the Autonomous Island of Grande Comore, hence no caveats, provisions or stipulations related thereto are within the signed contractual agreements).

Planning and Timetable for the Project

The Summary forecast for the following tasks of the project planning encompasses a timeline of 6 to 8 months:

Ø Analysis of the composition and characteristics of municipal solid waste,

Ø Study and preparation of plans for the preliminary engineering,

Ø Study and preparation of detailed plans of Engineering.

The Summary forecast for the Construction & synchronization of different modules in the MSW to Energy complex of the project planning encompasses a timeline of 16 to 18 months (incorporating approximately 4 months for project preparation for ground breaking ceremony).

28

Material Agreements

We have filed our Material Agreements (the Deed of Assignment pursuant to a Public-Private Partnership (PPP), the Power Purchase Agreement (PPA), and MSW, Land and Supply of Treated Effluent Concession Agreements), by and between the Governmental Authorities of the Grande Comore and BioCrude, in the S1 registration statement as Exhibits 10.11, 10.12 and 10.13, respectively. They are summarized as follows:

January 2016 – Concluded Engagements: signed Deed of Assignment pursuant to a Public-Private Partnership (PPP), MSW, Land and Supply of Treated Effluent Concession Agreements and a Power Purchase Agreement (PPA), by and between the Government of the Autonomous Island of Grande Comore and BioCrude Technologies USA, Inc., for the implementation of the first Waste to Energy complex in the municipality of Moroni, which are as follows:

Ø Deed of Assignment pursuant to a Public-Private Partnership (PPP): exclusively assigning the rights of waste management treatment to BioCrude via the inter-related specific concession vehicles, all defining protocol and mode of engagement as well as rights, interests and obligations of each engaging entity for the term of engagement (30 years) with an option of renewal for an additional term (30 years). Contract was signed January 11, 2016 and amended on December 9, 2016.

Ø MSW Concession* for the guaranteed delivery of MSW to the Complex with an implied base tipping fee per tonne of MSW (“Put or Pay” for the minimum MSW guarantee of 700 TPD) with annual escalations for the term (30 years) of the project with an option of renewal for an additional term (30 years) and Sovereign Guarantees from the Minister of Finance endorsing same. Contract was signed January 11, 2016 and amended on December 9, 2016.

Ø Land Lease Concession for the delivery of the required amount of land for project term (30 years), at an annual symbolic lease rate of $1/amount of land delivered/annum, with an option of renewal for an additional term (30 years). Contract was signed January 11, 2016 and amended on December 9, 2016.

Ø Supply of Treated Effluent Concession whereby the governmental authorities will supply the necessary treated water in order to fulfill the operational requirements of the MSW to Energy complex at a negligible symbolic annual rate for the term of the project with an option of renewal for an additional term (30 years). Contract was signed January 11, 2016 and amended on December 9, 2016.

Ø Power Purchase Agreement (PPA)* [resale of procured electricity to the Power Corporation of the country in question], whereby the Power Corporation of a certain country will buy back the electricity produced by the MSW to Energy Complex at a base rate per kW-hr (“Take or Pay” for all of the renewable energy procured less the self-consumption needs of the MSW-Energy complex), with annual escalations for the term (30 years) of the project with an option of renewal for an additional term (30 years) and Sovereign Guarantees from the Minister of Finance endorsing same. Contract was signed January 11, 2016 and amended on December 9, 2016.

On April 4th, 2017, China Machinery Industry Construction Group Inc.’s (SINOCONST) Senior Vice President and CFO, Ms. Zhang Ai Li, and BioCrude Technologies, Inc.’s Chairman and CEO, Mr. John Moukas, have signed a strategic Partnership (JV) Agreement which embodies the understood exclusive engagement by and between the participants of the JV Consortium (SINOCONST and BioCrude) for any present and future Waste to Energy Project(s) acquired by any party worldwide.

SINOCONST will be responsible for the EPC works (for the development of the Project(s) [Design and Build]) as well as securing the financing for the Project(s), while BioCrude will be the operator (Operation and management). Both SINOCONST and BioCrude will engage with SPV’s/SPE’s, with Contract (Project) Agreements and Operation and management Agreements.

As a caveat for securitizing payment of the contract price for Engineering, Procurement and Construction (“EPC”) works, via the financing mechanism established by SINOCONST, JV Consortium will set up “Special Purpose Vehicle’s/Entity’s” (“SPV/SPE”) for each and every acquired Project. The JV Consortium’s mission and ethos for creating an SPV/SPE of each well-defined Project is to enable direct securitization of financially engineered loans (and other receivables) against direct assets. SINOCONST’s association (equity participation) into every SPV/SPE will be provisional, in a sense where same will have a certain stake in the shareholdings (Common Stock) of the SPV/SPE (as defined in the Capital Structure of the SPV/SPE, as referenced below and in the Memorandum and Articles of Association of same, refer to Annex I), until such time that the loans vested for the development (Design, Building of Project by SINOCONST) of the Project are fully paid back by the JV Consortium from the proceeds of the receivables (for services rendered to client by the Project (SPV/SPE)), and all shares of Common Stock held by SINOCONST are transferred (sold to BioCrude for Project loan(s) repayment, only) to BioCrude as full and final settlement for the loan (that paid for the contract price of said development to SINOCONST). As part and parcel to the securitization of the loans in the SPV/SPE, BioCrude shall assign and/or subrogate its rights to its assets of that distinct Project (Concessions and Power Purchase Agreements, Sovereign Guarantees, Revenues of Operation, etc.…) to the SPV/SPE (“JV Consortium”), and same shall be subject to Charges (Mortgage, privilege, etc..) for financing (funding), only.

29

In April 4, 2017, SINOCONST and BioCrude have commissioned the services of B & W INT’L SECRETARY LIMITED (Honk Kong, China) [law firm] to establish an SPV/SPE, “BioCrude Technologies, (Hong Kong) Limited” [JV Corporation], as the development vehicle for the MSW to Energy project for the Autonomous Island of the Grande Comore, Union of the Comoros (we have filed in the 10-Q (as of June 30, 2017), as Exhibit 10.1, the “Articles of Incorporation” of BioCrude Technologies, (Hong Kong) Limited). The “SPV/SPE” possesses the following characteristics:

1. Memorandum and Articles of Association: “The Companies Ordinance (Cap. 622) [Hong Kong, China]” for “Private Company Limited by Shares” is utilized as the base Memorandum and Articles of Association and enhanced / modified as per the terms, conditions and stipulations of the JV Agreement by and between SINOCONST and BioCrude (we have filed in the 10-Q (as of June 30, 2017), as Exhibit 10.2, the “Memorandum and Articles of Association”).

2. Organization and Capital Structure: as per the stipulations of the Memorandum and Articles of Association, and modified to reflect the following, as well:

 BioCrude will account for seventy per cent (70.0%) of the total issued and outstanding shares of Common Stock at an issue price of 1 HKD per share for an aggregate issue price of 700 HKD, and at Closing Date;

SINOCONST will account for thirty per cent (30.0%) of the total issued and outstanding shares of Common Stock, at an issue price of 1 HKD per share for an aggregate issue price of 300 HKD, and at Closing Date and issued only once financing (funding) for the Project has been put in place, and will be holder of same until such time that financing (funding) has been paid back, in full, whereby all shares of Common Stock will have been transferred to BioCrude, as full and final settlement for loan repayment and shares of Common Stock acquisition.

Nota Bene: The financing (funding) secured by SINOCONST for the Project and accepted by the JV Consortium will bare an amortization of approximately five (5) years, with a negotiated mechanism for the repayment schedule of principal and interest. Every year end (from the beginning of operations of the Project, i.e., after project completion in accordance to the terms, conditions and stipulations of SINOCONST’s engagement (Contract (Project) Agreement) with SPV/SPE), relative to the amount of capital paid down from the original outstanding loan on that year, a pro rata amount of shares of Common Stock will be given (transferred) back to BioCrude in that year, until the full repayment of the loan, whereby the balance of the shares of Common Stock outstanding as shareholdings of SINOCONST are transferred back to BioCrude, and BioCrude is one hundred per cent (100.0%) shareholder of all of the issued and outstanding shares of Common Stock.

3. Management (Board of Directors, Officers): as per the stipulations of the Articles of Association, modified to reflect the terms, provisions and stipulations of the JV Agreement by and between BioCrude and SINOCONST.

On April 4th, 2017, SINOCONST’s General Manager of the Group Business Development Department, Mr. Zhou Tao, and BioCrude Technologies (Comoros), LTD. [Hong Kong SPV established by SINOCONST and BioCrude as a JV Partnership], Chairman and CEO, Mr. John Moukas, have signed a Construction (EPC) Contract Agreement which  embodies SPV’s engagement of SINONST to Design, Construct, and Finance BioCrude’s Municipal Solid Waste (MSW) to Energy Complex in the municipality of Moroni, Autonomous Island of the Grande Comore, Union of the Comoros, to treat MSW and procure renewable energy and other marketable by-products (organic fertilizer, ash, primary feedstock for building materials, etc.…) within the conforms of BioCrude’s acquired Concession and Power Purchase Agreements, as well as BioCrude’s Deed of Assignment pursuant to a Public-Private Partnership with the Governmental Authorities of the Autonomous Island of Grande Comore, Union of the Comoros.

On July 27, 2017, the Governmental Authorities of the Autonomous Island of the Grande Comore have issued to BioCrude a “Treasury Bond”, with supporting literature (indenture, resolutions, etc.…; we have filed in the 10-Q (as of June 30, 2017), as Exhibit 10.3, the “Treasury Bond” and supporting literature) baring a face value of twenty million United States Dollars (20,000,000 USD), in lieu of a “Revolving Letter of Credit (RLC)”, replenished quarterly (for the duration of the term of the contractual engagements), as per the provisions and stipulations of the contractual engagements (Concessions and Power Purchase Agreements). This Treasury Bond serves as a default payment mechanism guarantee, in the event of nonpayment of the Governmental Authorities of the Autonomous Island of the Grande Comore’s financial contractual obligations (tipping fees and/or fees due for the purchase of the renewable energy), which same can immediately, after default, be executed upon by BioCrude, to remedy default.

On September 1, 2017, BioCrude, in joint with SINOCONST (“JV Consortium”), have had a work session (in Beijing, China) with China Export and Credit Insurance Corporation (“SINOSURE”), to clarify particulars regarding BioCrude’s Municipal Solid Waste (MSW) to Energy Complex (“Project”) in the municipality of Moroni, Autonomous Island of the Grande Comore, Union of the Comoros, more particularly, the Concessions and Power Purchase Agreements and the Deed of Assignment pursuant to a Public – Private Partnership. Thereafter, BioCrude and SINOCONST, on behalf of BioCrude Technologies, (Hong Kong) Ltd (“SPV/SPE”), have submitted an application to SINOSURE requesting loan insurance for the Project. As part and parcel to the loan insurance application, an independent third-party feasibility study for the Project was requested. The JV Consortium has taken the initiative to solicit same for the execution of the required works.

30

On September 5, 2017, JV Consortium, on behalf of SPV/SPE, had a work session (in Beijing, China) with the Industrial and Commercial Bank of China Limited (“ICBC”), and shortly therewith, submitted to same, an application for funding for BioCrude’s Project. We are awaiting feedback regarding the indicative terms and conditions (“term sheet”) for the Project funding.

On October 5, 2017, BioCrude received from ICBC, the indicative terms and conditions (“term sheet”) for the Project funding (term of validity was six months). On April 8, 2018, BioCrude received from ICBC, a renewal of the “term sheet”, extending the term of validity for another six months.

On January, 2018, BioCrude, in joint with SINOCONST (“JV Consortium”), have commissioned out the works related to the feasibility study of the Municipal Solid Waste (MSW) to Energy Complex (“Project”) in the municipality of Moroni, Autonomous Island of the Grande Comore, Union of the Comoros, to China International Electronic Commerce Center (“CIECC”), an independent engineering firm in China, acceptable to SINOSURE’s shortlist of accredited and acceptable suppliers for same.

On January 23, 2018, BioCrude, in joint with SINOCONST (“JV Consortium”), had a work session (in Beijing, China) with CIECC. CIECC had requested that all of BioCrude’s literature be translated into mandarin (translation was concluded by March 30, 2018); the status of the final report of the feasibility study for the project, as of these presences, is pending.

On April 29, 2018, Comoros's President Sem Azali Assoumani declared that a referendum on amending the country's Constitution would be held in July 2018. On July 30, 2018, the results of the referendum were in favor of changing the constitution. One of the issues of address within the change of the Constitution was federal consolidation of powers, and as such, the Federal Government of the Union of the Comoros, would now be the new Intervening Party to the Concessions and Power Purchase Agreements, as well as the Deed of Assignment pursuant to a Public-Private Partnership (PPP), in lieu of the Governorate of the Autonomous Island of Grande Comore.

On September 15, 2018, BioCrude sent a delegation to the Union of the Comoros in order to clarify and document the transition of the Federal Government’s intervention, and as such, the Federal Government of the Union of the Comoros will have to issue the following declarations:

1. Amending Declaration to the Concessions and Power Purchase Agreements, as well as the Deed of Assignment pursuant to a Public-Private Partnership (PPP), by the Ministry of Finance, Economy, Budget, Investment and Foreign Trade of the Union of the Comoros, whereby they Federal Government of the Union of the Comoros acknowledges same, as well as declare that the Federal Government of the Union of the Comoros is the new intervening party to contracts, more particularly, with respect to honoring all of the Government’s obligations within the signed engagements with BioCrude, as well as the Sovereign Guarantees attached to same.

2. Amending Declaration to the Concessions and Power Purchase Agreements, as well as the Deed of Assignment pursuant to a Public-Private Partnership (PPP), by the Ministry of Production, Environment, Energy, Industry and Crafts of the Union of the Comoros, whereby the Federal Government of the Union of the Comoros acknowledges same, as well as declare that the Federal Government of the Union of the Comoros is the new intervening party to contracts, more particularly, with respect to honoring all of the Government’s obligations with the issuance of all necessary permits, and clearances for the development of BioCrude’s Waste to Energy project in Moroni, Grande Comore, Union of the Comoros.

BioCrude also requested from the Federal Government of the Union of the Comoros’ legal division, a legal opinion of the Concessions and Power Purchase Agreements, as well as the Deed of Assignment pursuant to a Public-Private Partnership (PPP), incorporating the change of the Contracting/Intervening Party. The Federal Government of the Union of the Comoros’ legal division is reviewing same for compliance; issuance of the aforesaid is pending.

31

Liquidity and Capital Resources

As of September 30, 2018, we had $53,901 in cash, total current assets of $105,445 and total current liabilities of $231,223. Current liabilities consisted primarily of $8,155 of accounts payable, $130,745 of current related party account(s) notes payable.

Going Concern

The future of our company is dependent upon its ability to obtain financing and upon future profitable operations. Management has plans to seek additional capital through a private placement and public offering of its common stock, if necessary. See note 2 to the financial statements for additional information.

Results of Operations

We generated no revenue during the nine months ended September 30, 2018. We also generated no revenue from either period in 2017. Total operating expenses were $852,117 during the nine months ended September 30, 2018 compared to $286,552 during the same period in 2017. The increase is mainly attributed to the recording of stock-based compensation amounting to $669,009 during the first quarter of 2018. This amount did not exist in the prior year whereby operating expenses would have amounted to $183,108 without recording the stock-based compensation.

Critical Accounting Policies

In Financial Reporting release No. 60, "Cautionary Advice Regarding Disclosure About Critical Accounting Policies" ("FRR 60"), the Securities and Exchange Commission suggested that companies provide additional disclosure and commentary on their most critical accounting policies. In FRR 60, the SEC defined the most critical accounting policies as the ones that are most important to the portrayal of a company's financial condition and operating results, and require management to make its most difficult and subjective judgments, often as a result of the need to make estimates of matters that are inherently uncertain. Based on this definition, our most critical accounting policies include: non-cash compensation valuation that affects the total expenses reported in the current period and the valuation of shares and underlying mineral rights acquired with shares. The methods, estimates and judgments we use in applying these most critical accounting policies have a significant impact on the results we report in our financial statements.

Available Information

We are subject to the informational requirements of the Securities Exchange Act of 1934, as amended. All of our reports are able to be reviewed through the SEC's Electronic Data Gathering Analysis and Retrieval System (EDGAR) which is publicly available through the SEC's website (http://www.sec.gov).

We intend to furnish to our stockholders, annual reports containing financial statements audited by our independent certified public accountants and quarterly reports containing reviewed unaudited interim financial statements for the first three-quarters of each fiscal year. You may contact the Securities and Exchange Commission at (800) SEC-0330 or you may read and copy any reports, statements or other information that we file with the Securities and Exchange Commission at the Securities and Exchange Commission's public reference room at the following location:

Public Reference Room

100 F. Street N.W.

Washington, D.C. 2054900405

Telephone: (800) SEC-0330

32

ITEM 3. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

The Company is not exposed to market risk related to interest rates or foreign currencies.

ITEM 4. CONTROLS AND PROCEDURES

Evaluation of Disclosure Controls and Procedures

As required by Rule 13a-15 under the Securities Exchange Act of 1934 (the “1934 Act”), as of September 30, 2018, we carried out an evaluation of the effectiveness of the design and operation of our disclosure controls and procedures. This evaluation was carried out under the supervision and with the participation of our Chief Executive Officer (our principal executive officer) and our Chief Financial Officer (our principal financial officer), who concluded, that our disclosure controls and procedures were effective as of September 30, 2018.

Disclosure controls and procedures are controls and other procedures that are designed to ensure that information required to be disclosed in our reports filed or submitted under the Securities Exchange Act is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms.  Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed in our reports filed under the Exchange Act is accumulated and communicated to our management, including our principal executive officer and our principal financial officer, as appropriate, to allow timely decisions regarding required disclosure.

PART II OTHER INFORMATION

ITEM 1. LEGAL PROCEEDINGS

The Company is not a party to any legal proceedings.

ITEM 1A. RISK FACTORS

There has been no material changes in the risk factors set forth in the Company’s 10-K filed March 27, 2018.

ITEM 2. UNREGISTERED SALES OF EQUITY SECURITIES AND USE OF PROCEEDS

There were no sales of unregistered equity securities during the covered time period.

ITEM 3. DEFAULTS UPON SENIOR SECURITIES

None.

ITEM 4. SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS

None.

ITEM 5. OTHER INFORMATION

None.

ITEM 6. EXHIBITS AND REPORTS ON FORM 8-K

(a)The following documents are included or incorporated by reference as exhibits to this report:

33

Exhibit No.	Description
31.1	Certification of Chief Executive Officer pursuant to Securities Exchange Act Rule 13a-14(a)/15d-14(a), as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
31.2	Certification of Chief Financial Officer pursuant to Securities Exchange Act Rule 13a-14(a)/15d-14(a), as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
32.1	Certification of Chief Executive Officer and Chief Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

(b) REPORTS ON FORM 8-K

None.

34

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

Biocrude Technologies USA, Inc. Registrant
By:	/s/ John Moukas
	Name: /s/ John Moukas Title: Chief Executive Officer

Date:  November 8, 2018

35

EX-31.1

Exhibit 31.1

CERTIFICATION

I, John Moukas, certify that:

1.               I have reviewed this Quarterly Report on Form 10-Q of BioCrude Technologies USA, Inc.;

2.               Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

3.               Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in the report;

4.               The registrant’s other certifying officer(s) and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

(a)  Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

(b)  Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

(c)  Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

(d)  Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

5.               The registrant’s other certifying officer(s) and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):

(a)  All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and

(b)  Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.

Date: November 8, 2018

/s/ John Moukas

Chief Executive Officer

(Principal Executive Officer)

EX-31.2

Exhibit 31.2

CERTIFICATION

I, John Moukas, certify that:

1.I have reviewed this Quarterly Report on Form 10-Q of BioCrude Technologies USA, Inc.;

2.               Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

3.               Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in the report;

4.               The registrant’s other certifying officer(s) and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15(d) - 15(f)) for the registrant and have:

(a)  Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

(b)  Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

(c)  Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

(d)  Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

5.              The registrant’s other certifying officer(s) and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):

(a)  All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and

(b)  Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.

Date: November 8, 2018

/s/ John Moukas

Chief Financial Officer

(Principal Financial Officer)

EX-32.1

Exhibit 32.1

CERTIFICATION PURSUANT TO 18 U.S.C. 1350 AS ADOPTED 

PURSUANT TO SECTION 906 OF THE SARBANES-OXLEY ACT OF 2002

The undersigned hereby certify, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that, to their knowledge, the Quarterly Report on Form 10-Q for the period ended September 30, 2018 of Biocrude Technologies USA, Inc. (the “Company”) fully complies with the requirements of Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended, and the information contained in such periodic report fairly presents, in all material respects, the financial condition and results of operations of the Company as of, and for, the periods presented in such report.

Very truly yours,

/s/ John Moukas

Chief Executive Officer

/s/ John Moukas

Chief Financial Officer

Dated: November 8, 2018

A signed original of this written statement required by Section 906 of the Sarbanes-Oxley Act of 2002 has been provided to Biocrude Technologies USA, Inc. and will be furnished to the Securities and Exchange Commission or its staff upon request.

XML

Document and Entity Information	9 Months Ended
	Sep. 30, 2018 shares
Document And Entity Information
Entity Registrant Name	BioCrude Technologies USA, Inc.
Entity Central Index Key	0001690384
Document Type	10-Q
Document Period End Date	Sep. 30, 2018
Amendment Flag	false
Current Fiscal Year End Date	--12-31
Entity's Reporting Status Current	Yes
Entity Filer Category	Non-accelerated Filer
Entity Emerging Growth Company	false
Entity Small Business	true
Entity Common Stock, Shares Outstanding	50,425,007
Document Fiscal Period Focus	Q3
Document Fiscal Year Focus	2018

XML

CONSOLIDATED BALANCE SHEETS (UNAUDITED) - USD ($)	Sep. 30, 2018	Dec. 31, 2017
CURRENT ASSETS
Cash	$ 53,901	$ 76,839
Prepaid Expenses	51,544	33,670
TOTAL ASSETS	105,445	110,509
CURRENT LIABILITIES
Accounts payable and accrued liabilities	8,155	14,274
Accounts payable and accrued liabilities - related party	130,745	263,218
Convertible debt		20,387
Loans payable	92,323	123,473
TOTAL LIABILITIES	231,223	421,352
STOCKHOLDERS' DEFICIT
Common stock, $0.001 par value, 75,000,000 shares authorized, 50,425,007 and 50,054,643 shares issued and outstanding as at September 30, 2018 and December 31, 2017, respectively	50,424	50,054
Additional Paid in Capital	7,375,990	6,358,560
Accumulated other comprehensive income	74,554	28,700
Accumulated deficit	(7,626,746)	(6,748,157)
TOTAL STOCKHOLDERS' DEFICIT	(125,778)	(310,843)
TOTAL LIABILITIES AND STOCKHOLDERS' DEFICIT	$ 105,445	$ 110,509

XML

CONSOLIDATED BALANCE SHEETS (Parenthetical) - $ / shares	Sep. 30, 2018	Dec. 31, 2017
Statement of Financial Position [Abstract]
Common stock, par value (in dollars per share)	$ 0.001	$ 0.001
Common stock, authorized	75,000,000	75,000,000
Common stock, issued	50,425,007	50,054,643
Common Stock, outstanding	50,425,007	50,054,643

XML

CONSOLIDATED STATEMENTS OF OPERATIONS AND COMPREHENSIVE LOSS (UNAUDITED) - USD ($)	3 Months Ended		9 Months Ended
	Sep. 30, 2018	Sep. 30, 2017	Sep. 30, 2018	Sep. 30, 2017
Income Statement [Abstract]
REVENUE
OPERATING EXPENSES
General and administrative	57,795	222,477	852,117	286,552
Total operating expenses	57,795	222,477	852,117	286,552
LOSS FROM OPERATIONS	(57,795)	(222,477)	(852,117)	(286,552)
Foreign exchange loss		9,115		12,784
Interest Expense	1,532	139	26,472	4,833
NET LOSS	$ (59,327)	$ (231,731)	$ (878,589)	$ (304,169)
Net loss per common share - basic and diluted (in dollars per share)	$ (0.00)	$ (0.00)	$ (0.00)	$ (0.01)
Weighted average number of common shares outstanding - basic and diluted (in shares)	50,116,655	49,808,953	50,116,655	49,808,303
COMPREHENSIVE INCOME (LOSS)
Net loss	$ (59,327)	$ (231,731)	$ (878,589)	$ (304,169)
Other comprehensive income (loss) - gain (loss) on foreign currency translation	(727)		45,854
Total comprehensive income (loss)	$ (60,054)	$ (231,731)	$ (832,735)	$ (304,169)

XML

CONSOLIDATED STATEMENTS OF CHANGES OF STOCKHOLDERS' DEFICIT (UNAUDITED) - USD ($)	Common Stock	Additional Paid-In Capital	Accumulated Other Comprehensive Income (Loss)	Accumulated Deficit	Total
Beginning balance at Dec. 31, 2017	$ 50,054	$ 6,358,560	$ 28,700	$ (6,748,157)	$ (310,843)
Beginning balance (in shares) at Dec. 31, 2017	50,054,643
Increase (Decrease) in Stockholders' Equity [Roll Forward]
Share based compensation	$ 156	623,182			623,338
Share based compensation (in shares)	155,835
Issuance of common stock for debt conversion	$ 199	328,923			329,122
Issuance of common stock for debt conversion (in shares)	199,468
Proceeds from issuance of common stock for cash	$ 6	23,994			24,000
Proceeds from issuance of common stock for cash (in shares)	6,000
Beneficial conversion feature		19,240			19,240
Net loss			49,340	(796,191)	(746,851)
End balance at Mar. 31, 2018	$ 50,415	7,353,899	78,040	(7,544,348)	(61,994)
End balance (in shares) at Mar. 31, 2018	50,415,946
Increase (Decrease) in Stockholders' Equity [Roll Forward]
Share based compensation
Share based compensation (in shares)
Issuance of common stock for debt conversion	$ 6	9,994			10,000
Issuance of common stock for debt conversion (in shares)	6,061
Proceeds from issuance of common stock for cash
Proceeds from issuance of common stock for cash (in shares)
Beneficial conversion feature		100			100
Net loss			(2,759)	(23,071)	(25,830)
End balance at Jun. 30, 2018	$ 50,421	7,363,993	75,281	(7,567,419)	(77,724)
End balance (in shares) at Jun. 30, 2018	50,422,007
Increase (Decrease) in Stockholders' Equity [Roll Forward]
Share based compensation	$ 3	$ 11,997			$ 12,000
Share based compensation (in shares)	3,000
Issuance of common stock for debt conversion
Issuance of common stock for debt conversion (in shares)
Proceeds from issuance of common stock for cash
Proceeds from issuance of common stock for cash (in shares)
Beneficial conversion feature
Net loss			(727)	(59,327)	(60,054)
End balance at Sep. 30, 2018	$ 50,424	$ 7,375,990	$ 74,554	$ (7,626,746)	$ (125,778)
End balance (in shares) at Sep. 30, 2018	50,425,007

XML

CONSOLIDATED STATEMENTS OF CASH FLOWS (UNAUDITED) - USD ($)	9 Months Ended
	Sep. 30, 2018	Sep. 30, 2017
Cash flow used in in operating activities
Net loss for the period	$ (832,735)	$ (403,999)
Adjustments to reconcile net loss to net cash used in operating activities:
Stock-based compensation	669,009	197,580
Shares issued for debt issue costs		6,211
Accretion and other non-cash interest		6,895
Foreign exchange		18,247
Changes in operating assets and liabilities
Prepaid expenses	(17,874)
Accounts Payable accrued liabilities	(6,119)	11,491
Accounts payable and accrued liabilities-related party	(132,473)
Net cash used in operating activities	(320,192)	(163,575)
CASH FLOWS FROM FINANCING ACTIVITIES:
Proceeds (repayments) from related party advances		79,115
Proceeds from issuance of convertible debt - related parties
Proceeds (repayments) from subscriptions (private placements)	(20,387)	48,753
Proceeds from issuance of convertible debt	348,791	112,378
Proceeds (repayments) of loans payable	(31,150)
Net cash provided by financing activities	297,254	240,246
Impact on cash from foreign currency translation
NET INCREASE IN CASH	(22,938)	76,671
CASH AT THE BEGINNING OF THE PERIOD	76,839	168
CASH AT THE END OF THE PERIOD	53,901	76,839
SUPPLEMENTAL DISCLOSURE OF CASH FLOWS INFORMATION:
Cash paid for income taxes
Cash paid for interest expense
Noncash investing and financing activities:
Beneficial conversion feature discount related to the issuance of convertible debt	19,340	6,352
Conversion of convertible debt to common stock	$ 319,882	$ 128,737

XML

ORGANIZATION AND BASIS OF PRESENTATION

9 Months Ended

Sep. 30, 2018

Organization, Consolidation and Presentation of Financial Statements [Abstract]

ORGANIZATION AND BASIS OF PRESENTATION

NOTE 1 – ORGANIZATION AND BASIS OF PRESENTATION

Organization & Nature of Operations

BioCrude Technologies USA, Inc. (the “Company” and/or “BioCrude”) was originally organized in the State of Nevada on August 4, 2015 and is a startup company that provides consulting as well as supplies waste management services, more particularly, with specialization in the Waste to Energy (W2E) milieu. The mission and ethos of the Company is to acquire the necessary Concessions from appropriate Governmental Authorities of municipalities/countries responsible for same, in order for the Company to implement its technical expertise and knowhow to develop its proposed “Integrated Municipal Solid Waste (“MSW”) to Renewable Energy Complex” for the treatment and disposal of MSW for municipal applications.

Interim Financial Statements

The unaudited interim consolidated financial statements of the Company have been prepared in accordance with United States generally accepted accounting principles (“GAAP”) for interim financial information and the rules and regulations of the Securities and Exchange Commission (“SEC”). They do not include all information and footnotes required by GAAP for complete financial statements. Except as disclosed herein, there have been no material changes in the information disclosed in the notes to the financial statements for the year ended December 31, 2017 included in the Company’s 2017 annual report on Form 10-K, filed with the SEC. The unaudited interim consolidated financial statements should be read in conjunction with those financial statements included in Form 10-K. In the opinion of management, all adjustments considered necessary for fair presentation, consisting solely of normal recurring adjustments, have been made. Operating results for the nine-month period ended September 30, 2018 are not necessarily indicative of the results that may be expected for the year ending December 31, 2018.

Basis of Presentation and Principles of Consolidation

The accompanying consolidated financial statements of the Company have been prepared in accordance with GAAP in the United States of America and the rules of the Securities and Exchange Commission (“SEC”).

The consolidated financial statements herein have been prepared in accordance with GAAP and include the accounts of the Company and its holdings of a partially-owned subsidiary as follows:

Name of Subsidiary	Country of Incorporation	Ownership	Principle Activities
BioCrude Technologies (Hong Kong) Limited.	China	70%	Waste management

All intercompany accounts and transactions have been eliminated

XML

GOING CONCERN

9 Months Ended

Sep. 30, 2018

Going Concern

GOING CONCERN

NOTE 2 – GOING CONCERN

As of September 30, 2018, the Company had an accumulated deficit of $7,626,746 and negative working capital of $125,778. Losses have principally occurred as a result of the substantial resources required for marketing and lobbying efforts of the Company’s concessions pursuit worldwide which included the general and administrative expenses associated with its organization and product development. These conditions raise substantial doubt about the Company’s ability to continue as a going concern. These financial statements do not include any adjustments to reflect the possible future effect on the recoverability and classification of assets or the amounts and classifications of liabilities that may result from the outcome of these uncertainties. Management plans to obtain additional funding and implement its strategic plan to allow the opportunity for the Company to continue as a going concern.

XML

SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

9 Months Ended

Sep. 30, 2018

Accounting Policies [Abstract]

SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

NOTE 3 – SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

Basis of presentation

These consolidated financial statements and related notes are presented in accordance with US GAAP and are presented in United States dollars

Use of Estimates

Preparing financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenue, and expenses. Actual results and outcomes may differ from management’s estimates and assumptions.

Cash and Cash Equivalents

For purposes of the statement of cash flows, the Company considers all highly liquid instruments purchased with an original maturity of three months or less to be cash equivalents.

Stock-Based Compensation

The Company accounts for all share-based payment awards made to employees and directors, based on their fair value. The Company measures share-based compensation to consultants by recognizing the fair value of the awards over the period the services are rendered or goods are provided.

Basic and Diluted Loss per Share

Basic loss per share is computed by dividing net loss available to common shareholders by the weighted average number of outstanding common shares during the period. Diluted loss per share gives effect to all dilutive potential common shares outstanding during the period. Dilutive loss per share excludes all potential common shares if their effect is anti-dilutive.

Income Taxes

The company has elected to account for income taxes using the taxes payable method. The taxes payable and provision for income taxes are based on the corporate income tax returns filed. There is no adjustment for income taxes related to temporary differences and no recognition of the benefit of income tax losses carried forward resulting from the net operating loss in the current period.

Foreign Currency Translation and Transaction

The Company’s reporting currency is the United States dollar. For the year ended December 31, 2017, the Company’s functional currency was predominantly the Canadian dollar, as opposed to the United States dollar. At January 1, 2017, as a result of the majority of the Company’s financing and operating activities being denominated in United States dollar, the Company re-evaluated its functional currency and determined it to be the United States dollar. Gains and losses that resulted from translation from Canadian dollars to the reporting currency and included in other comprehensive income will remain in the foreign currency translation reserve.

The Subsidiary’s functional and reporting currency is the United States dollar.

Foreign exchange gains and losses on the settlement of foreign currency transactions are included in foreign exchange expense. Except for translations of intercompany balances, all translations of monetary balances to the functional currency at the year-end exchange rate are included in foreign exchange expense. The translations of intercompany balances to the functional currency at the year-end exchange rate are included in accumulated other comprehensive income or loss.  

The Company has not, to the date of these consolidated financial statements, entered into derivative instruments to offset the impact of foreign currency fluctuations.

Share-based Expense

ASC 718, "Compensation – Stock Compensation", prescribes accounting and reporting standards for all share-based payment transactions in which employee services are acquired. Transactions include incurring liabilities, or issuing or offering to issue shares, options, and other equity instruments such as employee stock ownership plans and stock appreciation rights. Share-based payments to employees, including grants of employee stock options, are recognized as compensation expense in the financial statements based on their fair values. That expense is recognized over the period during which an employee is required to provide services in exchange for the award, known as the requisite service period (usually the vesting period).

The Company accounts for stock-based compensation issued to non-employees and consultants in accordance with the provisions of ASC 505-50, "Equity – Based Payments to Non-Employees."  Measurement of share-based payment transactions with non-employees is based on the fair value of whichever is more reliably measurable: (a) the goods or services received; or (b) the equity instruments issued.  The fair value of the share-based payment transaction is determined at the earlier of performance commitment date or performance completion date.  

Earnings Per Share Information

FASB ASC 260, "Earnings Per Share" provides for calculation of "basic" and "diluted" earnings per share.  Basic earnings per share includes no dilution and is computed by dividing net loss available to common shareholders by the weighted average common shares outstanding for the period.  Diluted earnings per share reflect the potential dilution of securities that could share in the earnings of an entity similar to fully diluted earnings per share.  Basic and diluted loss per share were the same, at the reporting dates, as there were no common stock equivalents outstanding.

Fair Value Measurements

The Company adopted the provisions of ASC Topic 820, "Fair Value Measurements and Disclosures", which defines fair value as used in numerous accounting pronouncements, establishes a framework for measuring fair value and expands disclosure of fair value measurements.

The estimated fair value of certain financial instruments, including cash and cash equivalents, payables to related parties, and accounts payable and accrued expenses are carried at historical cost basis, which approximates their fair values because of the short-term nature of these instruments.

ASC 820 defines fair value as the exchange price that would be received for an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date.  ASC 820 also establishes a fair value hierarchy, which requires an entity to maximize the use of observable inputs and minimize the use of unobservable inputs when measuring fair value. ASC 820 describes three levels of inputs that be used to measure fair value:

Level 1 - quoted prices in active markets for identical assets or

Level 2 - quoted prices for similar assets and liabilities in active markets or inputs that are observable

Level 3 - inputs that are unobservable (for example cash flow modeling inputs based on assumptions)

The Company's financial assets and liabilities are subsequent measured at amortized cost, but their carrying amount approximates their fair value due to the short period of time until maturity.

New and Recently Issued Accounting Pronouncements

In April 2015, the FASB issued ASU No. 2015-03, Interest - Imputation of Interest (Subtopic 835-30) - Simplifying the Presentation of Debt Issuance Costs. ASU 2015-03 amends previous guidance to require that debt issuance costs related to a recognized debt liability be presented in the balance sheet as a direct deduction from the carrying amount of that debt liability, consistent with debt discounts. The recognition and measurement guidance for debt issuance costs are not affected by the amendments in this ASU. The standard is effective for financial statements issued for fiscal years beginning after December 15, 2015, and interim periods within those fiscal years. Early adoption is permitted for financial statements that have not been previously issued. The Company expects that the affected amounts on its balance sheets will be reclassified within the balance sheets upon adoption of this ASU to conform to this standard.

The Company does not expect the adoption of any other recently issued accounting pronouncements to have a material impact on its financial statements.

Subsequent Events

The Company has evaluated all transactions from September 30, 2018 through November 8, 2018, the financial statement issuance date, for subsequent event disclosure consideration, and as such, has determined that there are no significant transactions within this aforesaid timeframe that merit disclosure.

XML

RELATED-PARTY TRANSACTIONS

9 Months Ended

Sep. 30, 2018

Related Party Transactions [Abstract]

RELATED-PARTY TRANSACTIONS

NOTE 4 – RELATED-PARTY TRANSACTIONS

As of September 30, 2018, the Company had outstanding advances due to the Company’s Chief Executive Officer of $130,745 (December 31, 2017 - $263,218) included in accounts payable – related parties. These amounts are unsecured, due on demand and bear no interest.

During the nine months ended September 30, 2018, the Company made net repayments of $132,473 (2017 - $15,391) to the Company’s Chief Executive Officer for amounts previously advanced to the Company.

Loans Payable – Related Parties

As of September 30, 2018, the Company had CAD $40,000 (December 31, 2017 – CAD $40,000) of outstanding loans payable to related parties that are past due and have an annual interest rate of 4%. As of September 30, 2018, accrued interest relating to this loan is $7,228 (December 31, 2017 - $3,695).

During the nine months ended September 30, 2018, the Company recorded interest expenses to related parties of $26,409 (2017 - $5,199). As of September 30, 2018, the Company has accrued interest balances of $8,007 (December 31, 2017 - $5,968).

Related Party Transactions

During the nine months ended September 30, 2018, the Company incurred $28,004 in administration fees to the Company’s Chief Executive Officer.

XML

CONVERTIBLE DEBTS

9 Months Ended

Sep. 30, 2018

Debt Disclosure [Abstract]

CONVERTIBLE DEBTS

NOTE 5 – CONVERTIBLE DEBTS

As of the nine months ended September 30, 2018, there are no convertible notes outstanding.

XML

SHARE CAPITAL

9 Months Ended

Sep. 30, 2018

Equity [Abstract]

SHARE CAPITAL

NOTE 6 – SHARE CAPITAL

The Company is authorized to issue up to 75,000,000 shares of common stock at par value $0.001 per share. As of September 30, 2018, the Company had 50,425,007 (December 31, 2017 - 50,054,643) shares of common stock issued and outstanding, respectively.

XML

SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (Policies)

9 Months Ended

Sep. 30, 2018

Accounting Policies [Abstract]

Basis of presentation

Basis of presentation

These consolidated financial statements and related notes are presented in accordance with US GAAP and are presented in United States dollars

Use of Estimates

Use of Estimates

Preparing financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenue, and expenses. Actual results and outcomes may differ from management’s estimates and assumptions.

Cash and Cash Equivalents

Cash and Cash Equivalents

For purposes of the statement of cash flows, the Company considers all highly liquid instruments purchased with an original maturity of three months or less to be cash equivalents.

Stock-Based Compensation

Stock-Based Compensation

The Company accounts for all share-based payment awards made to employees and directors, based on their fair value. The Company measures share-based compensation to consultants by recognizing the fair value of the awards over the period the services are rendered or goods are provided.

Basic and Diluted Loss per Share

Basic and Diluted Loss per Share

Basic loss per share is computed by dividing net loss available to common shareholders by the weighted average number of outstanding common shares during the period. Diluted loss per share gives effect to all dilutive potential common shares outstanding during the period. Dilutive loss per share excludes all potential common shares if their effect is anti-dilutive.

Income Taxes

Income Taxes

The company has elected to account for income taxes using the taxes payable method. The taxes payable and provision for income taxes are based on the corporate income tax returns filed. There is no adjustment for income taxes related to temporary differences and no recognition of the benefit of income tax losses carried forward resulting from the net operating loss in the current period.

Foreign Currency Translation and Transaction

Foreign Currency Translation and Transaction

The Company’s reporting currency is the United States dollar. For the year ended December 31, 2017, the Company’s functional currency was predominantly the Canadian dollar, as opposed to the United States dollar. At January 1, 2017, as a result of the majority of the Company’s financing and operating activities being denominated in United States dollar, the Company re-evaluated its functional currency and determined it to be the United States dollar. Gains and losses that resulted from translation from Canadian dollars to the reporting currency and included in other comprehensive income will remain in the foreign currency translation reserve.

The Subsidiary’s functional and reporting currency is the United States dollar.

Foreign exchange gains and losses on the settlement of foreign currency transactions are included in foreign exchange expense. Except for translations of intercompany balances, all translations of monetary balances to the functional currency at the year-end exchange rate are included in foreign exchange expense. The translations of intercompany balances to the functional currency at the year-end exchange rate are included in accumulated other comprehensive income or loss.  

The Company has not, to the date of these consolidated financial statements, entered into derivative instruments to offset the impact of foreign currency fluctuations.

Share-based Expense

Share-based Expense

ASC 718, “Compensation – Stock Compensation”, prescribes accounting and reporting standards for all share-based payment transactions in which employee services are acquired. Transactions include incurring liabilities, or issuing or offering to issue shares, options, and other equity instruments such as employee stock ownership plans and stock appreciation rights. Share-based payments to employees, including grants of employee stock options, are recognized as compensation expense in the financial statements based on their fair values. That expense is recognized over the period during which an employee is required to provide services in exchange for the award, known as the requisite service period (usually the vesting period).

The Company accounts for stock-based compensation issued to non-employees and consultants in accordance with the provisions of ASC 505-50, “Equity – Based Payments to Non-Employees.”  Measurement of share-based payment transactions with non-employees is based on the fair value of whichever is more reliably measurable: (a) the goods or services received; or (b) the equity instruments issued.  The fair value of the share-based payment transaction is determined at the earlier of performance commitment date or performance completion date.  

Earnings Per Share Information

Earnings Per Share Information

FASB ASC 260, “Earnings Per Share” provides for calculation of “basic” and “diluted” earnings per share.  Basic earnings per share includes no dilution and is computed by dividing net loss available to common shareholders by the weighted average common shares outstanding for the period.  Diluted earnings per share reflect the potential dilution of securities that could share in the earnings of an entity similar to fully diluted earnings per share.  Basic and diluted loss per share were the same, at the reporting dates, as there were no common stock equivalents outstanding.

Fair Value Measurements

Fair Value Measurements

The Company adopted the provisions of ASC Topic 820, "Fair Value Measurements and Disclosures", which defines fair value as used in numerous accounting pronouncements, establishes a framework for measuring fair value and expands disclosure of fair value measurements.

The estimated fair value of certain financial instruments, including cash and cash equivalents, payables to related parties, and accounts payable and accrued expenses are carried at historical cost basis, which approximates their fair values because of the short-term nature of these instruments.

ASC 820 defines fair value as the exchange price that would be received for an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date.  ASC 820 also establishes a fair value hierarchy, which requires an entity to maximize the use of observable inputs and minimize the use of unobservable inputs when measuring fair value. ASC 820 describes three levels of inputs that be used to measure fair value:

Level 1 - quoted prices in active markets for identical assets or

Level 2 - quoted prices for similar assets and liabilities in active markets or inputs that are observable

Level 3 - inputs that are unobservable (for example cash flow modeling inputs based on assumptions)

The Company's financial assets and liabilities are subsequent measured at amortized cost, but their carrying amount approximates their fair value due to the short period of time until maturity.

New and Recently Issued Accounting Pronouncements

New and Recently Issued Accounting Pronouncements

In April 2015, the FASB issued ASU No. 2015-03, Interest - Imputation of Interest (Subtopic 835-30) - Simplifying the Presentation of Debt Issuance Costs. ASU 2015-03 amends previous guidance to require that debt issuance costs related to a recognized debt liability be presented in the balance sheet as a direct deduction from the carrying amount of that debt liability, consistent with debt discounts. The recognition and measurement guidance for debt issuance costs are not affected by the amendments in this ASU. The standard is effective for financial statements issued for fiscal years beginning after December 15, 2015, and interim periods within those fiscal years. Early adoption is permitted for financial statements that have not been previously issued. The Company expects that the affected amounts on its balance sheets will be reclassified within the balance sheets upon adoption of this ASU to conform to this standard.

The Company does not expect the adoption of any other recently issued accounting pronouncements to have a material impact on its financial statements.

Subsequent Events

Subsequent Events

The Company has evaluated all transactions from September 30, 2018 through November 8, 2018, the financial statement issuance date, for subsequent event disclosure consideration, and as such, has determined that there are no significant transactions within this aforesaid timeframe that merit disclosure.

XML

ORGANIZATION AND BASIS OF PRESENTATION (Tables)

9 Months Ended

Sep. 30, 2018

Organization, Consolidation and Presentation of Financial Statements [Abstract]

Schedule of wholly-owned subsidiaries by company

The consolidated financial statements herein have been prepared in accordance with GAAP and include the accounts of the Company and its wholly-owned subsidiary as follows:

Name of Subsidiary	Country of Incorporation	Ownership	Principle Activities
BioCrude Technologies (Hong Kong) Limited.	China	70%	Waste management

XML

ORGANIZATION AND BASIS OF PRESENTATION (Details) - BioCrude Technologies (Hong Kong) Limited. [Member]	9 Months Ended
	Sep. 30, 2018
Country of Incorporation	<p><font style="font: 10pt Times New Roman, Times, Serif">China</font></p>
Ownership	70.00%
Principle Activities	<p><font style="font: 10pt Times New Roman, Times, Serif">Waste management</font></p>

XML

GOING CONCERN (Details Narrative) - USD ($)	Sep. 30, 2018	Dec. 31, 2017
Going Concern
Accumulated deficit	$ (7,626,746)	$ (6,748,157)
Working capital	$ (125,778)

XML

RELATED-PARTY TRANSACTIONS (Details Narrative)	9 Months Ended
	Sep. 30, 2018 USD ($)	Sep. 30, 2017 USD ($)	Sep. 30, 2018 CAD ($)	Dec. 31, 2017 USD ($)	Dec. 31, 2017 CAD ($)
Outstanding loans payable to related parties			$ 40,000		$ 40,000
Accrued interest payable	$ 8,007			$ 5,968
Interest rate	4.00%
Interest expenses to related parties	$ 26,409	$ 5,199
Chief Executive Officer [Member]
Advances from related parties	130,745	263,218
Repayment of related party debt	132,473	$ 15,391
Administration fees	28,004
Related Parties [Member] | Loans Payable [Member]
Accrued interest payable	$ 7,228			$ 3,695
Description of collateral	<p><font style="font: 10pt Times New Roman, Times, Serif">Loan is unsecured</font></p>
Description of interest rate terms	<p><font style="font: 10pt Times New Roman, Times, Serif">Bears no interest</font></p>
Description of repayment terms	<p><font style="font: 10pt Times New Roman, Times, Serif">Loan is repayable on demand</font></p>

XML

CONVERTIBLE DEBTS (Details Narrative) - USD ($)	Sep. 30, 2018	Dec. 31, 2017
Convertible debt		$ 20,387
Convertible Debt Member
Convertible debt	$ 0

XML

SHARE CAPITAL (Details Narrative) - $ / shares	Sep. 30, 2018	Dec. 31, 2017
Share Capital
Common stock authorized	75,000,000	75,000,000
Common stock par value (in dollars per share)	$ 0.001	$ 0.001
Common stock issued	50,425,007	50,054,643
Common stock outstanding	50,425,007	50,054,643