20-F 1 ferrarinv20-f12312015.htm 20-F Ferrari NV 20-F 12.31.2015

 

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
 
FORM 20-F
 
o
REGISTRATION STATEMENT PURSUANT TO SECTIONS 12(b) OR 12(g) OF THE SECURITIES EXCHANGE ACT OF 1934
OR
þ
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the Fiscal Year Ended December 31, 2015
OR
o
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
OR
o
SHELL COMPANY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
Commission File Number 001-36085
 
Ferrari N.V.
(Exact Name of Registrant as Specified in Its Charter)
 
The Netherlands
(Jurisdiction of Incorporation or Organization)
 
Via Abetone Inferiore n. 4
I-41053 Maranello (MO)
Italy
Tel. No.: +39 0536 949111
(Address, Including Zip Code, and Telephone Number, Including Area Code, of Registrant’s Principal Executive Offices)

Ferrari North America, Inc.
250 Sylvan Avenue
Englewood Cliffs, NJ 07632
Tel. No.: (201) 816-2600
(Name, Address, Including Zip Code, and Telephone Number, Including Area Code, of Agent for Service)

 
Securities registered pursuant to Section 12(b) of the Act:
Title of each class
 
Name of each exchange on which registered
Ordinary Shares (par value of €0.01 each)
 
New York Stock Exchange
Securities registered pursuant to Section 12(g) of the Act: None
Securities for which there is a reporting obligation pursuant to Section 15(d) of the Act: None
Indicate the number of outstanding shares of each of the issuer’s classes of capital or common stock as of the close of the period covered by the annual report: 188,921,600 common shares, par value €0.01 per share, and 170,029,450 special voting shares, par value €0.01 per share.
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes o No þ
If this report is an annual or transition report, indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Securities Act of 1934. Yes o No þ
Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes þ No o
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). N/A
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, or a non-accelerated filer. See definition of “accelerated filer and large accelerated filer” in Rule 12b-2 of the Exchange Act. (Check one):
Large accelerated filer o
 
Accelerated filer o
 
Non-accelerated filer þ
Indicate by check mark which basis of accounting the registrant has used to prepare the financial statements included in this filing:
U.S. GAAP o International Financial Reporting Standards as issued by the International Accounting Standards Board þ Other o
If “Other” has been checked in response to the previous question indicate by check mark which financial statement item the registrant has elected to follow: Item 17 o or Item 18 o.
If this is an annual report, indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).
Yes o No þ
(APPLICABLE ONLY TO ISSUERS INVOLVED IN BANKRUPTCY PROCEEDINGS DURING THE PAST FIVE YEARS)
Indicate by check mark whether the registrant has filed all documents and reports required to be filed by Sections 12, 13 or 15(d) of the Securities Exchange Act of 1934 subsequent to the distribution of securities under a plan confirmed by a court. Yes o No o




TABLE OF CONTENTS
 
 
 
Page
 
 
 
 
 
 
 
 
Item 1.
Item 2.
Item 3.
A.
B.
C.
D.
Item 4.
A.
B.
C.
D.
Item 4A.
Item 5.
 
 
 
 
A.
B.
C.
D.
E.
F.
G.
Item 6.
A.
B.
C.
D.
E.
Item 7.
A.
B.
C.


Item 8.
A.
B.
Item 9.
A.
B.
C.
D.
E.
F.
Item 10.
A.
B.
C.
D.
E.
F.
G.
H.
I.
Item 11.
Item 12.
A.
B.
C.
D.
 
 
 
 
 
 
Item 13.
Item 14.
Item 15.
Item 16A.
Item 16B.
Item 16C.
Item 16D.
Item 16E.
Item 16F.
Item 16G.
Item 16H.
 
 
 
 
 
 
Item 17.
Item 18.
Item 19.
 


Certain Defined Terms
In this report, unless otherwise specified, the terms “we,” “our,” “us,” the “Group,” the “Company” and “Ferrari” refer to Ferrari N.V., individually or together with its subsidiaries, as the context may require. References to “Ferrari N.V.” refer to the registrant (formerly named FE New N.V.) following completion of the Separation and to the registrant's predecessor (formerly named New Business Netherlands N.V.), prior to completion of the Separation. References to “FCA” or “FCA Group” refer to Fiat Chrysler Automobiles N.V., together with its subsidiaries and its predecessor prior to the completion of the merger of Fiat S.p.A. with and into FCA on October 12, 2014 (at which time Fiat Investments N.V. was named Fiat Chrysler Automobiles N.V., or FCA), or any one of them, as the context may require. References to “Fiat” refer solely to Fiat S.p.A., the predecessor of FCA. References to the “Separation” refer to the series of transactions through which the Ferrari business was separated from FCA as described under "Item 4.A. History and Development of the Company.
See “Basis of Preparation of the Consolidated Financial Statements” below for additional information regarding the financial presentation.

Note on Presentation
This document includes the consolidated financial statements of Ferrari N.V. for the years ended December 31, 2015, 2014 and 2013 prepared in accordance with International Financial Reporting Standards as issued by the International Accounting Standards Board (“IFRS”). We refer to these consolidated financial statements collectively as the “Consolidated Financial Statements.”
Basis of Preparation of the Consolidated Financial Statements
As explained in Note 1 to the Consolidated Financial Statements and in "Item 4 - Information on the Company - History and Development of the Company", the separation of Ferrari S.p.A. from FCA (the "Separation") was completed on January 3, 2016 through a series of transactions including (i) an intra-group restructuring which resulted in our acquisition of the assets and business of Ferrari North Europe Limited and the transfer by FCA of its 90 percent shareholding in Ferrari S.p.A. to us, (ii) the transfer of Piero Ferrari’s 10 percent shareholding in Ferrari S.p.A. to us, (iii) the initial public offering of our common shares, and (iv) the distribution, following the initial public offering, of FCA’s remaining interest in us to its shareholders. The transactions referred to in (i) and (ii) are defined in the Consolidated Financial Statements as the “Restructuring” and were completed in October 2015. The transaction referred to in (iii) was completed on October 21, 2015 when the Company's shares were admitted to listing on the New York Stock Exchange. The distribution referred to in (iv) was completed on January 3, 2016.
The Restructuring comprised: (i) a capital reorganization of the group under the Company and (ii) the issuance of promissory note to FCA (the “FCA Note”) which was subsequently refinanced through the issuance of third party debt (the FCA Note and subsequent refinancing are described under “Item 5.B. Liquidity and Capital Resources—Indebtedness with FCA and Refinancing of the FCA Note”.) In preparing the Consolidated Financial Statements, the Company has retrospectively applied FCA's basis of accounting for the periods prior to the Restructuring presented in the Consolidated Financial Statements based on the following:
(i)
The capital reorganization:

•
The Company was formed by FCA solely to effect the Separation and was controlled by FCA until completion of the Separation on January 3, 2016. Therefore, the capital reorganization does not meet the definition of a business combination in the context of IFRS 3 - “Business Combinations” but rather a combination of entities under common control and as such is excluded from the scope of IFRS 3. IFRS has no applicable guidance in accounting for such transactions. IAS 8 - “Accounting Policies, Changes in Accounting Estimates and Errors” states that in the absence of an IFRS which specifically applies to a transaction, the Company may consider the most recent pronouncements of other standard-setting bodies that use a similar conceptual framework to develop accounting standards or other accounting literature and accepted industry practices, to the extent that these do not conflict with the requirements in IFRS for dealing with similar and related issues or the definitions, recognition criteria and measurement concepts for assets, liabilities, income and expenses in the IFRS Conceptual Framework for Financial Reporting (the “Framework”). Accordingly, the Company has considered the guidance in ASC 805-50-30-5 on common control transactions, which indicates that the receiving entity (the Company) is able to reflect the transferred assets and liabilities in its own accounting records at the carrying amount in the accounting records of the transferring entity (FCA). As a

I


result, the Consolidated Financial Statements include FCA’s recorded goodwill relating to Ferrari S.p.A. in the amount of €780,542 thousand.

•
The retrospective accounting for the capital reorganization is consistent with the principles underlying paragraph 64 of IAS 33 - “Earnings per Share” which requires calculation of basic and diluted earnings per share for all periods presented to be adjusted retrospectively if changes occur to the capital structure after the reporting period but before the financial statements are authorized for issue. SAB Topic 4C also requires that such changes be given retroactive effect in the balance sheet where they occur after the reporting period but before the financial statements are authorized for issue. The capital reorganization has been accounted for as though it had occurred effective January 1, 2013 in the Consolidated Financial Statements. In particular:

•
The issuance of 156,917,727 common shares and 161,917,727 special voting shares in the Company to FCA has been reflected as an increase in share capital and share premium in the amounts of €3.2 million and €5,096.8 million, respectively, with an offset to retained earnings of €5.1 billion.
•
The issuance of 27,003,873 common shares and special voting shares in the Company to Piero Ferrari has been reflected as an increase in share capital and share premium in the amounts of €0.6 million and €877.4 million, respectively, with an offset to retained earnings of €878.0 million.
•
The historical number of common shares, nominal value per common share, basic and diluted earnings per common share amounts and other per share disclosures retrospectively reflect the capital structure of the Company post Restructuring for all periods presented, with the required disclosures presented in Notes 12 and 20 to the Consolidated Financial Statements.

The Restructuring was performed based on an independent appraisal performed for Dutch legal requirements.

(ii)
The issuance of the FCA Note:

•
The FCA Note and subsequent refinancing were reflected in the Consolidated Financial Statements only from the dates on which they occurred. In particular, the FCA Note for a principal amount of €7.9 billion was issued on October 17, 2015 and following the application of the proceeds from the issuance of the shares to FCA referred to above, the principal amount outstanding was €2.8 billion. The principal amount under the FCA Note was repaid on December 16, 2015 using cash deposits held with FCA and for the remainder from third party financing.

The Group’s financial information is presented in Euro. In some instances, information is presented in U.S. Dollars. All references in this document to “Euro” and “€” refer to the currency introduced at the start of the third stage of European Economic and Monetary Union pursuant to the Treaty on the Functioning of the European Union, as amended, and all references to “U.S. Dollars,” “U.S.$” and “$” refer to the currency of the United States of America (the “United States”).
The language of this document is English. Certain legislative references and technical terms have been cited in their original language in order that the correct technical meaning may be ascribed to them under applicable law.
Certain totals in the tables included in this document may not add due to rounding.


II


Forward-Looking Statements
Statements contained in this report, particularly those regarding our possible or assumed future performance, competitive strengths, costs, dividends, reserves and growth, industry growth and other trends and projections and estimated company earnings are “forward-looking statements” that contain risks and uncertainties. In some cases, words such as “may,” “will,” “expect,” “could,” “should,” “intend,” “estimate,” “anticipate,” “believe,” “outlook,” “continue,” “remain,” “on track,” “design,” “target,” “objective,” “goal,” “plan” and similar expressions are used to identify forward-looking statements. These forward-looking statements reflect the respective current views of Ferrari with respect to future events and involve significant risks and uncertainties that could cause actual results to differ materially from those indicated in the forward-looking statements. These factors include, without limitation:
•
our ability to preserve and enhance the value of the Ferrari brand;
•
the success of our Formula 1 racing team and the expenses we incur for our Formula 1 activities;
•
our ability to keep up with advances in high performance car technology and to make appealing designs for our new models;
•
our ability to preserve our relationship with the automobile collector and enthusiast community;
•
our low volume strategy;
•
the ability of Maserati, our engine customer, to sell its planned volume of cars;
•
changes in client preferences and automotive trends;
•
changes in the general economic environment and changes in demand for luxury goods, including high performance luxury cars, which is highly volatile;
•
the impact of increasingly stringent fuel economy, emission and safety standards, including the cost of compliance, and any required changes to our products;
•
our ability to successfully carry out our growth strategy and, particularly, our ability to grow our presence in emerging market countries;
•
competition in the luxury performance automobile industry;
•
reliance upon a number of key members of executive management and employees, and the ability of our current management team to operate and manage effectively;
•
the performance of our dealer network on which we depend for sales and services;
•
increases in costs, disruptions of supply or shortages of components and raw materials;
•
disruptions at our manufacturing facilities in Maranello and Modena;
•
our ability to provide or arrange for adequate access to financing for our dealers and clients, and associated risks;
•
the performance of our licensees for Ferrari-branded products;
•
our ability to protect our intellectual property rights and to avoid infringing on the intellectual property rights of others;
•
product recalls, liability claims and product warranties;
•
our continued compliance with customs regulations of various jurisdictions;
•
labor relations and collective bargaining agreements;
•
exchange rate fluctuations, interest rate changes, credit risk and other market risks;

•
changes in tax, tariff or fiscal policies and regulatory, political and labor conditions in the jurisdictions in which we operate;
•
our ability to ensure that our employees, agents and representatives comply with applicable law and regulations;
•
the adequacy of our insurance coverage to protect us against potential losses;

III


•
potential conflicts of interest due to director and officer overlaps with our largest shareholders;
•
our ability to maintain the functional and efficient operation of our information technology systems; and
•
other factors discussed elsewhere in this document.
We expressly disclaim and do not assume any liability in connection with any inaccuracies in any of the forward-looking statements in this document or in connection with any use by any third party of such forward-looking statements. Actual results could differ materially from those anticipated in such forward-looking statements. We do not undertake an obligation to update or revise publicly any forward-looking statements.

Additional factors which could cause actual results and developments to differ from those expressed or implied by the forward-looking statements are included in the section “Risk Factors” of this report. These factors may not be exhaustive and should be read in conjunction with the other cautionary statements included in this report. You should evaluate all forward-looking statements made in this report in the context of these risks and uncertainties.


IV


PART I

Item 1. Identity of Directors, Senior Management and Advisers
Not Applicable.
Item 2. Offer Statistics and Expected Timetable
Not Applicable.
Item 3. Key Information
A. Selected Financial Data
The following tables set forth selected historical consolidated financial and other data of Ferrari and have been derived from:
(i) the audited Consolidated Financial Statements, included elsewhere in this document;
(ii) the audited consolidated income statement of the Company for the year ended December 31, 2012;
(iii) the unaudited statement of financial position at December 31, 2012, and
(iv) the unaudited financial information for the year ended December 31, 2011.
This financial information has been prepared in accordance with IFRS.
For the purposes of the financial information set forth in this section, with the exception of the FCA Note and subsequent refinancing, which were reflected from the dates on which they occurred, the Restructuring has been retrospectively reflected as though it had occurred effective January 1, 2012.
The following information should be read in conjunction with “Note on Presentation,” “Item 3.D. Risk Factors,” “Item 5. Operating and Financial Review and Prospects” and the Consolidated Financial Statements included elsewhere in this document. Historical results for any period are not necessarily indicative of results for any future period.

Consolidated Income Statement Data
 
For the years ended December 31,
 
2015
 
2014
 
2013
 
2012
 
2011
 
(€ million, except per share data)
Net revenues
2,854

 
2,762

 
2,335

 
2,225

 
2,067

EBIT
444

 
389

 
364

 
335

 
298

Profit before taxes
434

 
398

 
366

 
334

 
301

Net profit
290

 
265

 
246

 
233

 
196

Attributable to:
 
 
 
 
 
 
 
 
 
Owners of the parent
288

 
261

 
241

 
225

 
188

Non-controlling interest
2

 
4

 
5

 
8

 
8

Basic and diluted earnings per common share (in Euro)(1)
1.52

 
1.38

 
1.27

 
1.19

 
n.a.

Dividends paid per share (in Euro)
—

 
—

 
—

 
—

 
n.a.

_____________________________
(1)    Retrospectively reflects the issuance of 188,921,600 common shares as if the Restructuring had occurred on January 1, 2012. See also Notes 12 and 20 to the Consolidated Financial Statements.

1


Consolidated Statement of Financial Position Data
 
At December 31,
 
2015
 
2014
 
2013
 
2012
 
2011
 
(€ million, except shares issued)
Cash and cash equivalents
183

 
134

 
114

 
100

 
94

Deposits in FCA Group cash management pools (1)
139

 
942

 
684

 
457

 
529

Total assets
3,875

 
4,641

 
3,895

 
3,465

 
3,369

Debt
2,260

 
510

 
317

 
261

 
522

Total (deficit)/equity
(19
)
 
2,478

 
2,316

 
2,041

 
1,769

(Deficit)/Equity attributable to owners of the parent
(25
)
 
2,470

 
2,290

 
2,019

 
1,748

Non-controlling interests
6

 
8

 
26

 
22

 
21

Share capital (2)
4

 
4

 
4

 
4

 
n.a.

Ordinary shares issued (in thousands of shares) (2)
188,922

 
188,922

 
188,922

 
188,922

 
n.a.

_____________________________
(1)    Deposits in FCA Group cash management pools relate to our participation in a group-wide cash management system at FCA prior to the Separation, where the operating cash management, main funding operations and liquidity investment of the Group were centrally coordinated by dedicated treasury companies with the objective of ensuring effective and efficient management of our funds. Following the Separation on January 3, 2016, these arrangements were terminated and we manage our liquidity and treasury function on a standalone basis.
(2)    Retrospectively reflects the issuance of 188,921,600 common shares and the same number of special voting shares, all with a nominal value of €0.01, as if the Restructuring had occurred on January 1, 2012. See also Note 20 to the Consolidated Financial Statements.


Other Statistical Information
 
For the years ended December 31,
 
2015
 
2014
 
2013
 
2012
 
2011
Shipments (number of cars)
7,664

 
7,255

 
7,000

 
7,405

 
7,195

Average number of employees for the period
2,954

 
2,843

 
2,774

 
2,708

 
2,709

Exchange rates
These exchange rates are included for informational purposes only and may differ from the exchange rates used in preparation of the Consolidated Financial Statements. For a description of the exchange rates used in the preparation of our Consolidated Financial Statements, please refer to section Significant Accounting Policies of our Consolidated Financial Statements included elsewhere in this document.

2


The table below shows the high, low, average and period end noon buying rates in The City of New York for cable transfers in foreign currencies as certified for customs purposes by the Federal Reserve Bank of New York for U.S.$ per €1.00. The average is computed using the noon buying rate on the last business day of each month during the period indicated.
Period 
 
High 
 
Low  
 
Average  
 
Period End  
Year ended December 31, 2011
 
1.4875
 
1.2926
 
1.3931
 
1.2973
Year ended December 31, 2012
 
1.3463
 
1.2062
 
1.2859
 
1.3186
Year ended December 31, 2013
 
1.3816
 
1.2774
 
1.3281
 
1.3779
Year ended December 31, 2014
 
1.3927
 
1.2101
 
1.3210
 
1.2101
Year ended December 31, 2015
 
1.2015
 
1.0524
 
1.1032
 
1.0859
Year ended December 31, 2016 (through February 19, 2016)
 
1.1362
 
1.0743
 
1.0832
 
1.1127
    
The table below shows the high and low noon buying rates for Euro for each month during the six months prior to the date of this document.
Period 
 
High  
 
Low  
September 2015
 
1,1358
 
1.1104
October 2015
 
1.1437
 
1.0524
November 2015
 
1.1026
 
1.0562
December 2015
 
1.1025
 
1.0573
January 2016
 
1.0964
 
1.0743
February 2016 (through February 19, 2016)
 
1.1362
 
1.0888
On February 19, 2016, the noon buying rate for U.S. Dollars was €1.00 = U.S.$1.1127.
B. Capitalization and Indebtedness
Not applicable.
C. Reason for the Offer and Use of Proceeds
Not applicable.
D. Risk Factors
We face a variety of risks in our business. The risks and uncertainties described below are not the only ones facing us. Additional risks and uncertainties that we are unaware of or that we currently believe to be immaterial, may also become important factors that affect us.
Risks Related to Our Business, Strategy and Operations
We may not succeed in preserving and enhancing the value of the Ferrari brand, which we depend upon to drive demand and revenues.
Our financial performance is influenced by the perception and recognition of the Ferrari brand, which, in turn, depends on many factors such as the design, performance, quality and image of our cars, the appeal of our dealerships and stores, the success of our promotional activities including public relations and marketing, as well as our general profile, including our brand’s image of exclusivity. The value of our brand and our ability to achieve premium pricing for Ferrari-branded products may decline if we are unable to maintain the value and image of the Ferrari brand, including, in particular, its aura of exclusivity. Maintaining the value of our brand will depend significantly on our ability to continue to produce luxury performance cars of the highest quality. The market for luxury goods generally and for luxury automobiles in particular is intensely competitive, and we may not be successful in maintaining and strengthening the appeal of our brand. Client preferences, particularly among luxury goods, can vary over time, sometimes rapidly. We are therefore exposed to changing perceptions of our brand image, particularly as we seek to attract new generations of clients. Any failure to preserve

3


and enhance the value of our brand may materially and adversely affect our ability to sell our cars, to maintain premium pricing, and to extend the value of our brand into other activities profitably or at all.
We selectively license the Ferrari brand to third parties that produce and sell Ferrari-branded luxury goods and therefore we rely on our licensing partners to preserve and enhance the value of our brand. If our licensees or the manufacturers of these products do not maintain the standards of quality and exclusivity that we believe are consistent with the Ferrari brand, or if such licensees or manufacturers otherwise misuse the Ferrari brand, our reputation and the integrity and value of our brand may be damaged and our business, operating results and financial condition may be materially and adversely affected.
Our brand image depends in part on the success of our Formula 1 racing team.
The prestige, identity, and appeal of the Ferrari brand depend on the continued success of the Scuderia Ferrari racing team in the Formula 1 World Championship. The racing team is a key component of our marketing strategy and may be perceived by our clients as a demonstration of the technological capabilities of our Sports and GT cars which also supports the appeal of other Ferrari-branded luxury goods. The success of our Formula 1 racing team has declined over the past several years as our most recent driver’s championship and constructors’ championship were in 2007 and 2008, respectively. As a result, we are enhancing our focus on Formula 1 activities with the goal of improving racing results and restoring our historical position as the premier racing team in Formula 1. If we are unable to attract and retain the necessary talent to succeed in international competitions or devote the capital necessary to fund successful racing activities, the value of the Ferrari brand and the appeal of our cars and other luxury goods may suffer. Even if we are able to attract such talent and adequately fund our racing activities, there is no assurance that this will lead to competitive success for our racing team.
The success of our racing team depends in particular on our ability to attract and retain top drivers and racing management and engineering talent. Our primary Formula 1 drivers, team managers and other key employees of Scuderia Ferrari are critical to the success of our racing team and if we were to lose their services, this could have a material adverse effect on the success of our racing team and correspondingly the Ferrari brand. If we are unable to find adequate replacements or to attract, retain and incentivize drivers and team managers, other key employees or new qualified personnel, the success of our racing team may suffer. As the success of our racing team forms a large part of our brand identity, a sustained period without racing success could detract from the Ferrari brand and, as a result, potential clients’ enthusiasm for the Ferrari brand and their perception of our cars, which could have an adverse effect on our business, results of operations and financial condition.
If we are unable to keep up with advances in high performance car technology, our competitive position may suffer.
Performance cars are characterized by leading-edge technology which is constantly evolving. In particular, advances in racing technology often lead to improved technology in road cars. Although we invest heavily in research and development, we may be unable to maintain our leading position in high performance car technology and, as a result, our competitive position may suffer. As technologies change, we plan to upgrade or adapt our cars and introduce new models in order to continue to provide cars with the latest technology. However, our cars may not compete effectively with our competitors’ cars if we are not able to develop, source and integrate the latest technology into our cars.
Developing and applying new automotive technologies is costly, and may become even more costly in the future as available technology advances and competition in the industry increases. If our research and development efforts do not lead to improvements in car performance relative to the competition, or if we are required to spend more to achieve comparable results, sales of our cars or our profitability may suffer.
If our car designs do not appeal to clients, our brand and competitive position may suffer.
Design and styling are an integral component of our models and our brand. Our cars have historically been characterized by distinctive designs combining the aerodynamics of a sports car with powerful, elegant lines. We believe our clients purchase our cars for their appearance as well as their performance. However, we will need to renew over time the style of our cars to differentiate the new models we produce from older models, and to reflect the broader evolution of aesthetics in our markets. We devote great efforts to the design of our cars and most of our current models are designed by Ferrari Design Centre, our in-house design team. If the design of our future models fails to meet the evolving tastes and preferences of our clients and prospective clients, or the appreciation of the wider public, our brand may suffer and our sales may be adversely affected.

4


The value of our brand depends in part on the automobile collector and enthusiast community.
An important factor in the connection of clients to the Ferrari brand is our strong relationship with the active global community of automotive collectors and enthusiasts, particularly collectors and enthusiasts of Ferrari automobiles. This is influenced by our close ties to the automotive collectors’ community and our support of related events (such as car shows and driving events), at our headquarters in Maranello and through our dealers, the Ferrari museum and affiliations with regional Ferrari clubs. The support of this community also depends upon the perception of our cars as collectibles, which we also support through our Ferrari Classiche services, and the active resale market for our automobiles which encourages interest over the long term.
If there is a change in collector appetite or damage to the Ferrari brand, our ties to and the support we receive from this community may be diminished. Such a loss of enthusiasm for our cars from the automotive collectors’ community could harm the perception of the Ferrari brand and adversely impact our sales and profitability.
 
Demand for luxury goods, including luxury performance cars, is volatile, which may adversely affect our operating results.
Volatility of demand for luxury goods, in particular luxury performance cars, may adversely affect our business, operating results and financial condition. The markets in which we sell our cars have been subject to volatility in demand in recent periods. Demand for luxury automobiles depends to a large extent on general, economic, political and social conditions in a given market as well as the introduction of new vehicles and technologies. As a luxury performance car manufacturer and low volume producer, we compete with larger automobile manufacturers many of which have greater financial resources in order to withstand changes in the market and disruptions in demand. Demand for our cars may also be affected by factors directly impacting automobile prices or the cost of purchasing and operating automobiles, such as the availability and cost of financing, prices of raw materials and parts and components, fuel costs and governmental regulations, including tariffs, import regulation and other taxes, including taxes on luxury goods, resulting in limitations to the use of high performance sports cars or luxury goods more generally. Volatility in demand may lead to lower car unit sales, which may result in further downward price pressure and adversely affect our business, operating results and financial condition. These effects may have a more pronounced impact on us given our low volume strategy and relatively smaller scale as compared to large global mass-market automobile manufacturers.
Our low volume strategy may limit potential profits.
A key to the appeal of the Ferrari brand and our marketing strategy is the aura of exclusivity and the sense of luxury which our brand conveys. A central facet to this exclusivity is the limited number of models and cars we produce and our strategy of maintaining our car waiting lists to reach the optimal combination of exclusivity and client service. Our low volume strategy is also an important factor in the prices that our clients are willing to pay for our cars. Regulation also affects our potential for volume growth because we are eligible for certain exemptions from fuel economy and emissions requirements provided we sell less than 10,000 road cars worldwide per year. See “—New laws, regulations, or policies of governmental organizations regarding increased fuel economy requirements, reduced greenhouse gas or pollutant emissions, or vehicle safety, or changes in existing laws, may have a significant effect on our costs of operation and/or how we do business.”
While important to our current marketing strategy, our focus on maintaining low volumes and exclusivity limits our potential sales growth and profitability. As a public company, we may from time to time face pressure to demonstrate growth including by increasing the volume of cars we sell. Notwithstanding any such pressure, we intend to continue to pursue a low volume strategy in order to maintain our reputation for exclusivity, while growing volume in a controlled way to respond to growth in emerging markets and demographic changes.
Conversely, if we were to change our strategy and increase production of our cars more aggressively, we may be unable to maintain the exclusivity of the Ferrari brand. If we are unable to balance brand exclusivity with increased production, we may erode the desirability and ultimately the consumer demand for our cars. As a result, if we are unable to increase car production meaningfully or introduce new car models without eroding the image of exclusivity in our brand we may be unable to significantly increase our revenues.
Our revenues from Formula 1 activities may decline and our related expenses may grow.
Revenues from our Formula 1 activities depend principally on the income from our sponsorship agreements and on our share of Formula 1 revenues from broadcasting and other sources. See “Item 4.B. Business—Formula 1 Activities.” If we

5


are unable to renew our existing sponsorship agreements or if we enter into new or renewed sponsorship agreements with less favorable terms, our revenues would decline. In addition, our share of Formula 1 results may decline if either our team’s performance worsens compared to other competing teams, or if the overall Formula 1 business suffers. Furthermore, in order to compete effectively on track we have been investing significant resources in research and development and to competitively compensate the best available drivers and other racing team members. These expenses also vary based on changes in Formula 1 regulations that require modification to our racing engines and cars. These expenses are expected to continue, and may grow further, including as a result of any changes in Formula 1 regulations, which would negatively affect our results of operations.
The small number of car models we produce and sell may result in greater volatility in our financial results.
We currently depend on the sales of six range models, one special series and one limited edition supercar to generate our revenues. While we anticipate expanding our car offerings, we expect that a limited number of models will continue to account for a large portion of our revenues at any given time in the foreseeable future. Therefore, our future operating results depend upon the continued market acceptance of each model in our line-up. There can be no assurance that our cars will continue to be successful in the market. On average it takes about 40 months (approximately 33 months for M models) from the beginning of the development phase to start of production for a new model and the car development process is capital intensive. As a result, we would likely be unable to replace the revenue lost from one of our main car models if it does not achieve market acceptance. Furthermore, volatility in our revenues and profits is also affected by our “special series” and limited edition cars that we launch from time to time and are typically priced higher than our range models. There can be no assurance that we will be successful in developing, producing and marketing additional new cars that will sustain sales growth in the future.
Engine production revenues are dependent on Maserati’s ability to sell its cars.
We produce V8 and V6 engines for Maserati. In particular, we have a multi-year arrangement with Maserati to provide V6 engines in an initial production run of up to 178,000 engines in aggregate through 2020, which, based on our discussions with Maserati, is expected to increase to up to 260,000 engines in aggregate through 2023 to cater to Maserati’s planned expanded model range and sales volumes. While Maserati is required to compensate us for certain costs we may incur, such as penalties from our suppliers, in the event that the sales of Maserati cars decline, or do not increase at the expected rate, such an event would adversely affect our revenues from the sale of engines.
Our business is subject to changes in client preferences and automotive trends.
Our continued success depends in part on our ability to originate and define product and automotive trends, as well as to anticipate and respond promptly to changing consumer demands and automotive trends in the design, styling, technology, production, merchandising and pricing of our products. Our products must appeal to a client base whose preferences cannot be predicted with certainty and are subject to rapid change. Evaluating and responding to client preferences has become even more complex in recent years, due to our expansion in new geographical markets. If we misjudge the market for our products, we and our dealers may be faced with excess inventories for some cars and missed opportunities with others. In addition, there can be no assurance that we will be able to produce, distribute and market new products efficiently or that any product category that we may expand or introduce will achieve sales levels sufficient to generate profits. Any of these outcomes could have a material adverse effect on our business, results of operations and financial condition.
Global economic conditions may adversely affect us.
Our sales volumes and revenues may be affected by overall general economic conditions. Deteriorating general economic conditions may affect disposable incomes and reduce consumer wealth impacting client demand, particularly for luxury goods which may negatively impact our profitability and put downward pressure on our prices and volumes. Furthermore, during recessionary periods, social acceptability of luxury purchases may decrease and higher taxes may be more likely to be imposed on certain luxury goods including our cars, which may affect our sales. Adverse economic conditions may also affect the financial health and performance of our dealers in a manner that will affect sales of our cars or their ability to meet their commitments to us.
Many factors affect the level of consumer spending in the luxury performance car industry, including the state of the economy as a whole, stock market performance, interest and exchange rates, inflation, political uncertainty, the availability of consumer credit, tax rates, unemployment levels and other matters that influence consumer confidence. In

6


general, although our sales have historically been comparatively resilient in periods of economic turmoil, sales of luxury goods tend to decline during recessionary periods when the level of disposable income tends to be lower or when consumer confidence is low.
We distribute our products internationally and we may be affected by downturns in general economic conditions or uncertainties regarding future economic prospects that may impact the countries in which we sell a significant portion of our products. In particular, the majority of our current sales are in the EU and in the United States; if we are unable to expand in emerging markets, a downturn in mature economies such as the EU and the United States may negatively affect our financial performance. In the EU, in particular, despite measures taken by several governments and monetary authorities to provide financial assistance to certain Eurozone countries and to avoid default on sovereign debt obligations, concerns persist regarding the debt burden of several countries. These concerns, along with the significant fiscal adjustments carried out in several countries, intended to manage actual or perceived sovereign credit risk, have led to further pressure on economic growth and may lead to new periods of recession.
A significant decline in the EU or the global economy or in the specific economies of our markets, or in consumers’ confidence could have a material adverse effect on our business.
New laws, regulations, or policies of governmental organizations regarding increased fuel economy requirements, reduced greenhouse gas or pollutant emissions, or vehicle safety, or changes in existing laws, may have a significant effect on our costs of operation and/or how we do business.
We are subject throughout the world to comprehensive and constantly evolving laws, regulations and policies. We expect the extent of the legal and regulatory requirements affecting our business and our costs of compliance to continue to increase significantly in the future. In Europe and the United States, for example, significant governmental regulation is driven by environmental, fuel economy, vehicle safety and noise emission concerns. Evolving regulatory requirements could significantly affect our product development plans and may limit the number and types of cars we sell and where we sell them, which may affect our revenue. Governmental regulations may increase the costs we incur to design, develop and produce our cars and may affect our product portfolio. Regulation may also result in a change in the character or performance characteristics of our cars which may render them less appealing to our clients. We anticipate that the number and extent of these regulations, and their effect on our cost structure and product line-up, will increase significantly in the future.
Current European legislation limits fleet average greenhouse gas emissions for new passenger cars, and new targets have been set in 2014 with more stringent emission targets applicable to the 2017-2021 period. Due to our small volume manufacturer (“SVM”) status we benefit from a derogation from the existing emissions requirement and we are instead required to meet by 2016 alternative targets for our fleet of EU-registered vehicles. Therefore, in 2015, we submitted our proposed CO2 emissions target for the 2017-2021 period to the EU Commission for approval.
In the United States, the U.S. Environmental Protection Agency (“EPA”) and the National Highway Traffic Safety Administration (“NHTSA”) have set the federal standards for passenger cars and light trucks to meet certain combined average fuel economy (“CAFE”) levels and more stringent standards have been prescribed for model years 2017 through 2025. As a SVM that is able to demonstrate our operational independence from FCA, we expect to benefit from a derogation from currently applicable standards. We have also petitioned the EPA for alternative standards for the 2017-2021 model years, which are aligned to our technical and economic capabilities, and we expect to receive feedback on this proposal by mid-2016. We intend to petition NHTSA for recognition as an independent manufacturer of less than 10,000 vehicles globally, in order to be eligible for alternate CAFE standards, as permitted under the CAFE program. If our petition qualifying for alternate CAFE standards is successful, NHTSA will determine the appropriate level of CAFE applicable to us for future model years.
 
In addition, we are subject to legislation relating to the emission of other air pollutants such as, among others, the “Tier 3” Motor Vehicle Emission and Fuel Standards issued by the EPA, and the Zero Emission Vehicle regulation in California, which are subject to similar derogations for SVMs, as well as vehicle safety legislation. NHTSA also recently published guidelines for driver distraction, and the associated compliance costs may be substantial.
Other governments around the world, such as those in Canada, South Korea, China and certain Middle Eastern countries are also creating new policies to address these issues which could be even more stringent than the U.S. or European requirements. As in the United States and Europe, these government policies if applied to us could significantly affect our product development plans. In China, for example, Stage III fuel consumption regulations target a national average fuel consumption of 6.9L/100km by 2015 and Stage IV targets a national average fuel consumption of 5.0L/100km by 2021. In

7


response to severe air quality issues in Beijing and other major Chinese cities, the Chinese government also intends to adopt more stringent emissions standards for Mainland China beginning in 2016. It is unclear whether the new standards, if adopted, will include exceptions for SVMs similar to those currently in place in the United States and in the EU.
We could lose our status as a SVM in the EU and/or the United States if we do not continue to meet all of the necessary eligibility criteria under applicable regulations as they evolve. In order to meet these criteria we may need to modify our growth plans or other operations. Furthermore, even if we continue to benefit from derogations as a SVM, we will be subject to alternative standards that the regulators deem appropriate for our technical and economic capabilities and such alternative standards may be significantly more stringent than those currently applicable to us.
Under these existing regulations, as well as new or stricter rules or policies, we could be subject to sizable civil penalties or have to restrict or modify product offerings drastically to remain in compliance. We may have to incur substantial capital expenditures and research and development expenditures to upgrade products and manufacturing facilities, which would have an impact on our cost of production and results of operation.
Our growth strategy exposes us to risks.
Our growth strategy includes a controlled expansion of our sales and operations, including the launching of new car models and expanding sales and dealer operations in targeted growth regions internationally. In particular, our growth strategy requires us to expand operations in regions that we have identified as having relatively high growth potential. We may encounter difficulties, including more significant competition in entering and establishing ourselves in these markets.
Our growth depends on the continued success of our existing cars, as well as the successful design and introduction of new cars. Our ability to create new cars and to sustain existing car models is affected by whether we can successfully anticipate and respond to consumer preferences and car trends. The failure to develop and launch successful new cars could hinder the growth of our business. Also, any delay in the development or launch of a new product could result in others bringing new products and technology to market first, which could compromise our competitive position.
Our growth strategy may expose us to new business risks that we may not have the expertise, capability or the systems to manage. This strategy will also place significant demands on us by requiring us to continuously evolve and improve our operational, financial and internal controls. Continued expansion also increases the challenges involved in maintaining high levels of quality, management and client satisfaction, recruiting, training and retaining sufficient skilled management, technical and marketing personnel. If we are unable to manage these risks or meet these demands, our growth prospects and our business, results of operation and financial condition could be adversely affected.
We currently plan to open additional dealerships and Ferrari stores in various international markets. We do not yet have significant experience directly operating in many of these markets, and in many of them we face established competitors. Many of these countries have different operational characteristics, including but not limited to employment and labor, transportation, logistics, real estate, environmental regulations and local reporting or legal requirements.
Consumer demand and behavior, as well as tastes and purchasing trends may differ in these markets, and as a result, sales of our products may not be successful, or the margins on those sales may not be in line with those we currently anticipate. Furthermore, such markets will have upfront short-term investment costs that may not be accompanied by sufficient revenues to achieve typical or expected operational and financial performance and therefore may be dilutive to us in the short-term. In many of these countries, there is significant competition to attract and retain experienced and talented employees.
Consequently, if our international expansion plans are unsuccessful, our business, results of operation and financial condition could be materially adversely affected.
We face competition in the luxury performance car industry.
We face competition in all product categories and markets in which we operate. We compete with other international luxury performance car manufacturers which own and operate well-known brands of high-quality cars, some of which form part of larger automotive groups and may have greater financial resources and bargaining power with suppliers than we do, particularly in light of our policy to maintain low volumes in order to preserve and enhance the exclusivity of our cars. We believe that we compete primarily on the basis of our brand image, the performance and design of our cars and our reputation for quality. If we are unable to compete successfully, our business, results of operations and financial condition could be adversely affected.

8


Developments in emerging markets may adversely affect our business.
We operate in a number of emerging markets, both directly and through our dealers and we have experienced increasing demand in China and the Middle East.
Our strategy contemplates expanding our sales in the Middle East and Asia regions, recognizing the increasing personal wealth in these markets. While demand in these markets has increased in recent years due to sustained economic growth and growth in personal income and wealth, we are unable to foresee the extent to which economic growth in these emerging markets will be sustained. For example, recent events in Asia including market turmoil and currency devaluations, and potential slowdowns in the rate of growth there and in other emerging markets could limit the opportunity for us to increase unit sales and revenues in those regions in the near term.
Our exposure to emerging countries is likely to increase, as we pursue expanded sales in such countries. Economic and political developments in emerging markets, including economic crises or political instability, have had and could have in the future material adverse effects on our results of operations and financial condition. Further, in certain markets in which we or our dealers operate, required government approvals may limit our ability to act quickly in making decisions on our operations in those markets. Other government actions may also impact the market for luxury goods in these markets, such as tax changes or the active discouragement of luxury purchases.
Maintaining and strengthening our position in these emerging markets is a key component of our global growth strategy. However, initiatives from several global luxury automotive manufacturers have increased competitive pressures for luxury cars in several emerging markets. As these markets continue to grow, we anticipate that additional competitors, both international and domestic, will seek to enter these markets and that existing market participants will try to aggressively protect or increase their market share. Increased competition may result in pricing pressures, reduced margins and our inability to gain or hold market share, which could have a material adverse effect on our results of operations and financial condition.
 
Our success depends largely on the ability of our current management team to operate and manage effectively.
Our success depends on the ability of our senior executives and other members of management to effectively manage our business as a whole and individual areas of the business. Our management team particularly benefits from the leadership of our CEO, Amedeo Felisa, who brings over 40 years of automotive technical experience and skill to his leadership role and our chairman, Sergio Marchionne, who engineered the operating and financial turnaround of Fiat and Chrysler and the global expansion of our parent company, FCA, into the seventh largest automaker in the world (based on 2014 vehicle sales worldwide). Our employees, particularly in our production facilities in and around Maranello, Italy include many highly skilled engineers, technicians and artisans. If we were to lose the services of any of these senior executives or key employees, this could have a material adverse effect on our business, operating results and financial condition. We have developed succession plans that we believe are appropriate in the circumstances, although it is difficult to predict with any certainty that we will replace these individuals with persons of equivalent experience and capabilities. If we are unable to find adequate replacements or to attract, retain and incentivize senior executives, other key employees or new qualified personnel, our business, results of operations and financial condition may suffer.
We rely on our dealer network to provide sales and services.
We do not own our Ferrari dealers and virtually all of our sales are made through our network of dealerships located throughout the world. If our dealers are unable to provide sales or service quality that our clients expect or do not otherwise adequately project the Ferrari image and its aura of luxury and exclusivity, the Ferrari brand may be negatively affected. We depend on the quality of our dealership network and our business, operating results and financial condition could be adversely affected if our dealers suffer financial difficulties or otherwise are unable to perform to our expectations.
Our growth strategy also depends on our ability to attract a sufficient number of quality new dealers to sell our products in new areas. We may face competition from other luxury performance car manufacturers in attracting quality new dealers, based on, among other things, dealer margin, incentives and the performance of other dealers in the region. If we are unable to attract a sufficient number of new Ferrari dealers in targeted growth areas, our prospects could be materially adversely affected.

9


We depend on our suppliers, many of which are single source suppliers; and if these suppliers fail to deliver necessary raw materials, systems, components and parts of appropriate quality in a timely manner our operations may be disrupted.
Our business depends on a significant number of suppliers, which provide the raw materials, components, parts and systems we require to manufacture cars and parts and to operate our business. We use a variety of raw materials in our business including aluminum, and precious metals such as palladium and rhodium. We source materials from a limited number of suppliers. We cannot guarantee that we will be able to maintain access to these raw materials, and in some cases this access may be affected by factors outside of our control and the control of our suppliers. In addition, prices for these raw materials fluctuate and while we seek to manage this exposure, we may not be successful in mitigating these risks.
As with raw materials, we are also at risk for supply disruption and shortages in parts and components we purchase for use in our cars. We source a variety of key components from third parties, including transmissions, brakes, driving-safety systems, navigation systems, mechanical, electrical and electronic parts, plastic components as well as castings and tires, which makes us dependent upon the suppliers of such components. While we obtain components from multiple sources whenever possible, similar to other small volume car manufacturers, most of the key components we use in our cars are purchased by us from single source suppliers. We generally do not qualify alternative sources for most of the single-sourced components we use in our cars and we do not maintain long-term agreements with a number of our suppliers. Furthermore, we have limited ability to monitor the financial stability of our suppliers.
 
While we believe that we may be able to establish alternate supply relationships and can obtain or engineer replacement components for our single-sourced components, we may be unable to do so in the short term, or at all, at prices or costs that we believe are reasonable. Qualifying alternate suppliers or developing our own replacements for certain highly customized components of our cars may be time consuming, costly and may force us to make costly modifications to the designs of our cars.
In the past, we have replaced certain suppliers because they have failed to provide components that met our quality control standards. The loss of any single or limited source supplier or the disruption in the supply of components from these suppliers could lead to delays in car deliveries to our clients, which could adversely affect our relationships with our clients and also materially and adversely affect our operating results and financial condition. Supply of raw materials, parts and components may also be disrupted or interrupted by natural disasters, as was the case in 2012 following the earthquake in the Emilia Romagna region of Italy.
Changes in our supply chain have in the past resulted and may in the future result in increased costs and delays in car production. We have also experienced cost increases from certain suppliers in order to meet our quality targets and development timelines and because of design changes that we have made. We may experience similar cost increases in the future. Additionally, we are negotiating with existing suppliers for cost reductions, seeking new and less expensive suppliers for certain parts, and attempting to redesign certain parts to make them less expensive to produce. If we are unsuccessful in our efforts to control and reduce supplier costs while maintaining a stable source of high quality supplies, our operating results will suffer. Additionally, cost reduction efforts may disrupt our normal production processes, thereby harming the quality or volume of our production.
Furthermore, if our suppliers fail to provide components in a timely manner or at the level of quality necessary to manufacture our cars, our clients may face longer waiting periods which could result in negative publicity, harm our reputation and relationship with clients and have a material adverse effect on our business, operating results and financial condition.
We depend on our manufacturing facilities in Maranello and Modena.
We assemble all of the cars that we sell and manufacture all of the engines we use in our cars and sell to Maserati at our production facility in Maranello, Italy, where we also have our corporate headquarters. We manufacture all of our car chassis in a nearby facility in Modena, Italy. Our Maranello or Modena plants could become unavailable either permanently or temporarily for a number of reasons, including contamination, power shortage or labor unrest. Alternatively, changes in law and regulation, including export, tax and employment laws and regulations, or economic conditions, including wage inflation, could make it uneconomic for us to continue manufacturing our cars in Italy. In the event that we were unable to continue production at either of these facilities or it became uneconomic for us to continue to do so, we would need to seek alternative manufacturing arrangements which would take time and reduce our ability to produce sufficient cars to meet demand. Moving manufacturing to other locations may also affect the perception of our brand and car quality among our

10


clients. Such a transfer would materially reduce our revenues and could require significant investment, which as a result could have a material adverse effect on our business, results of operations and financial condition.
Maranello and Modena are located in the Emilia-Romagna region of Italy which has the potential for seismic activity. For instance, in 2012 a major earthquake struck the region, causing production at our facilities to be temporarily suspended for a day. If major disasters such as earthquakes, fires, floods, hurricanes, wars, terrorist attacks, pandemics or other events occur, our headquarters and production facilities may be seriously damaged, or we may have to stop or delay production and shipment of our cars. As such damages from disasters or unpredictable events could have a material adverse impact on our business, results from operations and financial condition.
 
Car sales depend in part on the availability of affordable financing.
In certain regions, financing for new car sales has been available at relatively low interest rates for several years due to, among other things, expansive government monetary policies. To the extent that interest rates rise generally, market rates for new car financing are expected to rise as well, which may make our cars less affordable to clients or cause consumers to purchase less expensive cars, adversely affecting our results of operations and financial condition. Additionally, if consumer interest rates increase substantially or if financial service providers tighten lending standards or restrict their lending to certain classes of credit, our clients may not desire to or be able to obtain financing to purchase our cars.
We may not be able to provide adequate access to financing for our dealers and clients.
Our dealers enter into wholesale financing arrangements to purchase cars from us to hold in inventory or to use in showrooms and facilitate retail sales, and retail clients use a variety of finance and lease programs to acquire cars.
In most markets, we rely on controlled finance companies and commercial relationships with third parties, including third party financial institutions, to provide financing to our dealers and retail clients. Finance companies are subject to various risks that could negatively affect their ability to provide financing services at competitive rates, including:
•
the performance of loans and leases in their portfolio, which could be materially affected by delinquencies or defaults;
•
higher than expected car return rates and the residual value performance of cars they lease; and
•
fluctuations in interest rates and currency exchange rates.
Any financial services provider, including our controlled finance companies, will face other demands on its capital, as well as liquidity issues relating to other investments or to developments in the credit markets. Furthermore, they may be subject to regulatory changes that may increase their costs, which may impair their ability to provide competitive financing products to our dealers and retail clients. To the extent that a financial services provider is unable or unwilling to provide sufficient financing at competitive rates to our dealers and retail clients, such dealers and retail clients may not have sufficient access to financing to purchase or lease our cars. As a result, our car sales and market share may suffer, which would adversely affect our results of operations and financial condition.
We rely on our licensing and franchising partners to preserve the value of our licenses and the failure to maintain such partners could harm our business.
We currently have multi-year agreements with licensing partners for various Ferrari-branded products in the sports, lifestyle and luxury retail segments. We also have multi-year agreements with franchising partners for our Ferrari stores and theme park. In the future, we may enter into additional licensing or franchising arrangements. Many of the risks associated with our own products also apply to our licensed products and franchised stores. In addition, there are unique problems that our licensing or franchising partners may experience, including risks associated with each licensing partner’s ability to obtain capital, manage its labor relations, maintain relationships with its suppliers, manage its credit and bankruptcy risks, and maintain client relationships. While we maintain significant control over the products produced for us by our licensing partners and the franchisees running our Ferrari stores and theme park, any of the foregoing risks, or the inability of any of our licensing or franchising partners to execute on the expected design and quality of the licensed products, Ferrari stores and theme park, or otherwise exercise operational and financial control over its business, may result in loss of revenue and competitive harm to our operations in the product categories where we have entered into such licensing or franchising arrangements. While we select our licensing and franchising partners with care, any negative publicity surrounding such partners could have a negative effect on licensed products, the Ferrari stores and theme parks or the Ferrari brand. Further,

11


while we believe that we could replace our existing licensing or franchising partners if required, our inability to do so for any period of time could materially adversely affect our revenues and harm our business.
We depend on the strength of our trademarks and other intellectual property rights.
We believe that our trademarks and other intellectual property rights are fundamental to our success and market position. Therefore, our business depends on our ability to protect and promote our trademarks and other intellectual property rights. Accordingly, we devote substantial efforts to the establishment and protection of our trademarks and other intellectual property rights such as registered designs and patents on a worldwide basis. We believe that our trademarks and other intellectual property rights are adequately supported by applications for registrations, existing registrations and other legal protections in our principal markets. However, we cannot exclude the possibility that our intellectual property rights may be challenged by others, or that we may be unable to register our trademarks or otherwise adequately protect them in some jurisdictions. If a third party were to register our trademarks, or similar trademarks, in a country where we have not successfully registered such trademarks, it could create a barrier to our commencing trade under those marks in that country.
Third parties may claim that we infringe their intellectual property rights.
We believe that we hold all the rights required for our business operations (including intellectual property rights and third-party licenses). However, we are exposed to potential claims from third parties alleging that we infringe their intellectual property rights, since many competitors and suppliers also submit patent applications for their inventions and secure patent protection or other intellectual property rights. If we are unsuccessful defending against any such claim, we may be required to pay damages or comply with injunctions which may disrupt our operations. We may also as a result be forced to enter into royalty or licensing agreements on unfavorable terms or to redesign products to comply with third parties’ intellectual property rights.
If our cars do not perform as expected our ability to develop, market and sell our cars could be harmed.
Our cars may contain defects in design and manufacture that may cause them not to perform as expected or that may require repair. There can be no assurance that we will be able to detect and fix any defects in the cars prior to their sale to consumers. Our cars may not perform in line with our clients’ evolving expectations or in a manner that equals or exceeds the performance characteristics of other cars currently available. For example, our newer cars may not have the durability or longevity of current cars, and may not be as easy to repair as other cars currently on the market. Any product defects or any other failure of our performance cars to perform as expected could harm our reputation and result in adverse publicity, lost revenue, delivery delays, product recalls, product liability claims, harm to our brand and reputation, and significant warranty and other expenses, and could have a material adverse impact on our business, operating results and financial condition.
Car recalls may be costly and may harm our reputation.
We have in the past and we may from time to time in the future be required to recall our products to address performance, compliance or safety-related issues. We may incur costs for these recalls, including replacement parts and labor to remove and replace the defective parts. For a description of recent instances of recalls, see “Item 4.B. Regulatory Matters—Vehicle Safety”. In addition, regulatory oversight of recalls, particularly in the vehicle safety, has increased recently. While the cost of recent recalls is not material to us, any product recalls can harm our reputation with clients, particularly if consumers call into question the safety, reliability or performance of our cars. Any such recalls could harm our reputation and result in adverse publicity, lost revenue, delivery delays, product liability claims and other expenses, and could have a material adverse impact on our business, operating results and financial condition.
 
We may become subject to product liability claims, which could harm our financial condition and liquidity if we are not able to successfully defend or insure against such claims.
We may become subject to product liability claims, which could harm our business, operating results and financial condition. The automobile industry experiences significant product liability claims and we have inherent risk of exposure to claims in the event our cars do not perform as expected or malfunction resulting in personal injury or death. A successful product liability claim against us could require us to pay a substantial monetary award. Moreover, a product liability claim could generate substantial negative publicity about our cars and business, adversely affecting our reputation and inhibiting or preventing commercialization of future cars which could have a material adverse effect on our brand, business, operating results and financial condition. While we seek to insure against product liability risks, insurance may be insufficient to protect against any monetary claims we may face and will not mitigate any reputational harm. Any lawsuit seeking significant monetary damages may have a material adverse effect on our reputation, business and financial condition. We may not be

12


able to secure additional product liability insurance coverage on commercially acceptable terms or at reasonable costs when needed, particularly if we face liability for our products and are forced to make a claim under such a policy.
We are exposed to risks in connection with product warranties as well as the provision of services.
A number of our contractual and legal requirements oblige us to provide extensive warranties to our clients, dealers and national distributors. There is a risk that, relative to the guarantees and warranties granted, the calculated product prices and the provisions for our guarantee and warranty risks have been set or will in the future be set too low. There is also a risk that we will be required to extend the guarantee or warranty originally granted in certain markets for legal reasons, or provide services as a courtesy or for reasons of reputation where we are not legally obliged to do so, and for which we will generally not be able to recover from suppliers or insurers.
If we were to lose our Authorized Economic Operator certificate, we may be required to modify our current business practices and to incur increased costs, as well as experience shipment delays.
Because we ship and sell our cars in numerous countries, the customs regulations of various jurisdictions are important to our business and operations. To expedite customs procedure, we applied for, and currently hold, the European Union’s Authorized Economic Operator (AEO) certificate. The AEO certificate is granted to operators that meet certain requirements regarding supply chain security and the safety and compliance with law of the operator’s customs controls and procedures. Operators are audited periodically for continued compliance with the requirements. The AEO certificate allows us to benefit from special expedited customs treatment, which significantly facilitates the shipment of our cars in the various markets where we operate. However, if we were to lose the AEO status, including for failure to meet one of the certification’s requirements, we would be required to change our business practices and to adopt standard customs procedures for the shipment of our cars. This could result in increased costs and shipment delays, which, in turn, could negatively affect our results of operations.
Labor laws and collective bargaining agreements with our labor unions could impact our ability to operate efficiently.
All of our production employees are represented by trade unions, are covered by collective bargaining agreements and/or are protected by applicable labor relations regulations that may restrict our ability to modify operations and reduce costs quickly in response to changes in market conditions. These regulations and the provisions in our collective bargaining agreements may impede our ability to restructure our business successfully to compete more efficiently and effectively, especially with those automakers whose employees are not represented by trade unions or are subject to less stringent regulations, which could have a material adverse effect on our results of operations and financial condition.
 
We are subject to risks associated with exchange rate fluctuations, interest rate changes, credit risk and other market risks.
We operate in numerous markets worldwide and are exposed to market risks stemming from fluctuations in currency and interest rates. The exposure to currency risk is mainly linked to the differences in geographic distribution of our sourcing and manufacturing activities from those in our commercial activities, as a result of which our cash flows from sales are denominated in currencies different from those connected to purchases or production activities. For example, we incur a large portion of our capital and operating expenses in Euros while we receive the majority of our revenues in currencies other than Euro. In addition, foreign exchange movements might also negatively affect the relative purchasing power of our clients which could also have an adverse effect on our results of operations.
We seek to manage risks associated with fluctuations in currency through financial hedging instruments. Although we seek to manage our foreign currency risk in order to minimize any negative effects caused by rate fluctuations, including through hedging activities, there can be no assurance that we will be able to do so successfully, and our business, results of operations and financial condition could nevertheless be adversely affected by fluctuations in market rates, particularly if these conditions persist.
Our financial services activities are also subject to the risk of insolvency of dealers and retail clients, as well as unfavorable economic conditions in markets where these activities are carried out. Despite our efforts to mitigate such risks through the credit approval policies applied to dealers and retail clients, there can be no assurances that we will be able to successfully mitigate such risks, particularly with respect to a general change in economic conditions.

13


Changes in tax, tariff or fiscal policies could adversely affect demand for our products.
Imposition of any additional taxes and levies designed to limit the use of automobiles could adversely affect the demand for our vehicles and our results of operations. Changes in corporate and other taxation policies as well as changes in export and other incentives given by various governments or import or tariff policies could also adversely affect our results of operations. While we are managing our product development and production operations on a global basis to reduce costs and lead times, unique national or regional standards can result in additional costs for product development, testing, and manufacturing. Governments often require the implementation of new requirements during the middle of a product cycle, which can be substantially more expensive than accommodating these requirements during the design of a new product. The imposition of any additional taxes and levies or change in government policy designed to limit the use of high performance sports cars or automobiles more generally could also adversely affect the demand for our cars. The occurrence of the above may have a material adverse effect on our business, results of operations and financial condition.
We face risks associated with our international operations, including unfavorable regulatory, political, tax and labor conditions and establishing ourselves in new markets, all of which could harm our business.
We currently have international operations and subsidiaries in various countries and jurisdictions in Europe, North America and Asia that are subject to the legal, political, regulatory, tax and social requirements and economic conditions in these jurisdictions. Additionally, as part of our growth strategy, we will continue to expand our sales, maintenance, and repair services internationally. However, such expansion requires us to make significant expenditures, including the establishment of local operating entities, hiring of local employees and establishing facilities in advance of generating any revenue. We are subject to a number of risks associated with international business activities that may increase our costs, impact our ability to sell our cars and require significant management attention. These risks include:
•
conforming our cars to various international regulatory and safety requirements where our cars are sold, or homologation;
•
 
•
difficulty in establishing, staffing and managing foreign operations;
•
difficulties attracting clients in new jurisdictions;
•
foreign government taxes, regulations and permit requirements, including foreign taxes that we may not be able to offset against taxes imposed upon us in Italy;
•
fluctuations in foreign currency exchange rates and interest rates, including risks related to any interest rate swap or other hedging activities we undertake;
•
our ability to enforce our contractual and intellectual property rights, especially in those foreign countries that do not respect and protect intellectual property rights to the same extent as do the United States, Japan and European countries, which increases the risk of unauthorized, and uncompensated, use of our technology;
•
European Union and foreign government trade restrictions, customs regulations, tariffs and price or exchange controls;
•
foreign labor laws, regulations and restrictions;
•
preferences of foreign nations for domestically produced cars;
•
changes in diplomatic and trade relationships;
•
political instability, natural disasters, war or events of terrorism; and
•
the strength of international economies.
If we fail to successfully address these risks, many of which we cannot control, our business, operating results and financial condition could be materially harmed.

14


Improper conduct of employees, agents, or other representatives could adversely affect our reputation and our business, operating results, and financial condition.
Our compliance controls, policies, and procedures may not in every instance protect us from acts committed by our employees, agents, contractors, or collaborators that would violate the laws or regulations of the jurisdictions in which we operate, including employment, foreign corrupt practices, environmental, competition, and other laws and regulations. Such improper actions could subject us to civil or criminal investigations, and monetary and injunctive penalties. In particular, our business activities may be subject to anti-corruption laws, regulations or rules of other countries in which we operate. If we fail to comply with any of these regulations, it could adversely impact our operating results and our financial condition. In addition, actual or alleged violations could damage our reputation and our ability to conduct business. Furthermore, detecting, investigating, and resolving any actual or alleged violation is expensive and can consume significant time and attention of our executive management.
Our insurance coverage may not be adequate to protect us against all potential losses to which we may be subject, which could have a material adverse effect on our business.
We maintain insurance coverage that we believe is adequate to cover normal risks associated with the operation of our business. However, there can be no assurance that any claim under our insurance policies will be honored fully or timely, our insurance coverage will be sufficient in any respect or our insurance premiums will not increase substantially. Accordingly, to the extent that we suffer loss or damage that is not covered by insurance or which exceeds our insurance coverage, or have to pay higher insurance premiums, our financial condition may be affected.
 
The requirements of being a U.S. public company may strain our resources and divert management’s attention.
As a public company, we are or will be required to comply with various corporate governance and financial reporting requirements under the Sarbanes-Oxley Act of 2002 (“Sarbanes-Oxley”), the Securities and Exchange Act of 1934, as amended (the “Exchange Act”), and the rules and regulations adopted by the SEC and the Public Corporation Accounting Oversight Board. Further, compliance with various regulatory reporting requires significant commitments of time from our management and our directors, which reduces the time available for the performance of their other responsibilities. If we are unable to comply with the rules and regulations or are otherwise unable to obtain necessary certifications to financial statements or other disclosures, this may materially adversely affect our reputation, lead to additional regulatory enforcement actions, and could adversely affect the value of our common shares.
Failure to establish and maintain effective internal controls in accordance with Section 404 of Sarbanes-Oxley could have a material adverse effect on our business and common share price.
As a public company, we will be required to document and test our internal control procedures in order to satisfy the requirements of Section 404 of Sarbanes-Oxley (“Section 404”), which will require management assessments and certifications of the effectiveness of our internal control over financial reporting, beginning with our annual report for the year ending December 31, 2016. During the course of our testing, we may identify deficiencies that we may not be able to remedy in time to meet our deadline for compliance with Section 404. We may not be able to conclude on an ongoing basis that we have effective internal control over financial reporting in accordance with Section 404. In addition, under Section 404(b) of Sarbanes-Oxley, our independent registered public accounting firm will be required to report on the effectiveness of our internal control over financial reporting but may not be able or willing to issue an unqualified report. If we conclude that our internal control over financial reporting is not effective, we cannot be certain as to the timing of remediation actions and testing or their effect on our operations.
If we are unable to conclude that we have effective internal control over financial reporting, our independent auditors are unable to provide us with an unqualified report as required by Section 404, or we are required to restate our financial statements, we may fail to meet our public reporting obligations and investors could lose confidence in our reported financial information, or the listing of our common shares on the NYSE could be suspended or terminated, any of which could have a negative effect on the trading price of our common shares.
A disruption in our information technology could compromise confidential and sensitive information.
We depend on our information technology and data processing systems to operate our business, and a significant malfunction or disruption in the operation of our systems, or a security breach that compromises the confidential and sensitive information stored in those systems, could disrupt our business and adversely impact our ability to compete. Our ability to keep our business operating effectively depends on the functional and efficient operation of our information, data

15


processing and telecommunications systems, including our car design, manufacturing, inventory tracking and billing and payment systems. We rely on these systems to enable a number of business processes and help us make a variety of day-to-day business decisions as well as to track transactions, billings, payments and inventory. Such systems are susceptible to malfunctions and interruptions due to equipment damage, power outages, and a range of other hardware, software and network problems. Those systems are also susceptible to cybercrime, or threats of intentional disruption, which are increasing in terms of sophistication and frequency. For any of these reasons, we may experience systems malfunctions or interruptions. Although our systems are diversified, including multiple server locations and a range of software applications for different regions and functions, and we are currently undergoing an effort to assess and ameliorate risks to our systems, a significant or large scale malfunction or interruption of any one of our computer or data processing systems could adversely affect our ability to manage and keep our operations running efficiently, and damage our reputation if we are unable to track transactions and deliver products to our dealers and clients. A malfunction that results in a wider or sustained disruption to our business could have a material adverse effect on our business, results of operations and financial condition. In addition to supporting our operations, we use our systems to collect and store confidential and sensitive data, including information about our business, our clients and our employees. As our technology continues to evolve, we anticipate that we will collect and store even more data in the future, and that our systems will increasingly use remote communication features that are sensitive to both willful and unintentional security breaches. Much of our value is derived from our confidential business information, including car design, proprietary technology and trade secrets, and to the extent the confidentiality of such information is compromised, we may lose our competitive advantage and our car sales may suffer. We also collect, retain and use certain personal information, including data we gather from clients for product development and marketing purposes, and data we obtain from employees. In the event of a breach in security that allows third parties access to this personal information, we are subject to a variety of ever-changing laws on a global basis that require us to provide notification to the data owners, and that subject us to lawsuits, fines and other means of regulatory enforcement. Our reputation could suffer in the event of such a data breach, which could cause consumers to purchase their cars from our competitors. Ultimately, any significant compromise in the integrity of our data security could have a material adverse effect on our business.
Risks Related to our Common Shares
 
The market price and trading volume of our common shares may be volatile, which could result in rapid and substantial losses for our shareholders.
The market price of our common shares may be highly volatile and could be subject to wide fluctuations. In addition, the trading volume of our common shares may fluctuate and cause significant price variations to occur. If the market price of our common shares declines significantly, you may be unable to sell your common shares at or above your purchase price, if at all. The market price of our common shares may fluctuate or decline significantly in the future. Some of the factors that could negatively affect the price of our common shares, or result in fluctuations in the price or trading volume of our common shares, include:
•
variations in our operating results, or failure to meet the market’s earnings expectations;
•
publication of research reports about us or the automotive industry, or the failure of securities analysts to cover our common shares;
•
departures of any members of our management team or additions or departures of other key personnel;
•
adverse market reaction to any indebtedness we may incur or securities we may issue in the future;
•
actions by shareholders;
•
changes in market valuations of similar companies;
•
changes or proposed changes in laws or regulations, or differing interpretations thereof, affecting our business, or enforcement of these laws and regulations, or announcements relating to these matters;
•
adverse publicity about the automotive industry generally, or particularly scandals relating to the industry, specifically;
•
litigation and governmental investigations; and
•
general market and economic conditions.

16


The loyalty voting program may affect the liquidity of our common shares and reduce our common share price.
The implementation of our loyalty voting program could reduce the trading liquidity and adversely affect the trading prices of our common shares. The loyalty voting program was intended to reward our shareholders for maintaining long-term share ownership by granting initial shareholders and persons holding our common shares continuously for at least three years the option to elect to receive special voting shares. Special voting shares cannot be traded and, if common shares participating in the loyalty voting program are sold they must be deregistered from the loyalty register and any corresponding special voting shares transferred to us for no consideration (om niet). This loyalty voting program is designed to encourage a stable shareholder base and, conversely, it may deter trading by shareholders that may be interested in participating in our loyalty voting program. Therefore, the loyalty voting program may reduce liquidity in our common shares and adversely affect their trading price.
The interests of our largest shareholders may differ from the interests of other shareholders.
Exor S.p.A. is our largest shareholder, holding approximately 23.5 percent of our common shares and approximately 33.4 percent of our voting power. Therefore, Exor will have a significant influence over these matters submitted to a vote of our shareholders, including matters such as adoption of the annual financial statements, declarations of annual dividends, the election and removal of the members of our Board, capital increases and amendments to our articles of association. In addition, Piero Ferrari, the Vice Chairman of Ferrari, holds 10 percent of our common shares and approximately 15.4% of voting interest in us. As a result, he will also have influence in matters submitted to a vote of our shareholders. Exor and Piero Ferrari informed us that they have entered into a shareholder agreement pursuant to which they have undertaken to consult for the purpose of forming, where possible, a common view on the items on the agenda of shareholders meetings. See “Item 7. Major Shareholders and Related Party Transactions—Shareholders' Agreement”. The interests of Exor and Piero Ferrari may in certain cases differ from those of other shareholders. In addition, the sale of substantial amounts of our common shares in the public market by Piero Ferrari or the perception that such a sale could occur could adversely affect the prevailing market price of the common shares.
We may have potential conflicts of interest with FCA and Exor and its related companies.
Questions relating to conflicts of interest may arise between us and FCA, our former largest shareholder prior to the Separation, in a number of areas relating to common shareholdings and management, as well as our past and ongoing relationships. Even after the Separation overlaps remain among the directors and officers of us and FCA. For example, Mr. Sergio Marchionne, our Chairman, is the Chief Executive Officer of FCA and Mr. Marchionne and certain of our other directors and officers may also be directors or officers of FCA or Exor, our and FCA’s largest shareholder. These individuals owe duties both to us and to the other companies that they serve as officers and/or directors. This may raise conflicts as, for example, these individuals review opportunities that may be appropriate or suitable for both us and such other companies, or we pursue business transactions in which both we and such other companies have an interest, such as our arrangement to supply engines for Maserati cars. Exor holds approximately 23.5 percent of our common shares and approximately 33.4 percent of the voting power in us, while it holds approximately 29 percent of the common shares and 44 percent of the voting power in FCA. Exor also owns a controlling interest in CNH Industrial N.V., which was part of the FCA group before its spin-off several years ago. These ownership interests could create actual, perceived or potential conflicts of interest when these parties or our common directors and officers are faced with decisions that could have different implications for us and FCA or Exor, as applicable.
Our loyalty voting program may make it more difficult for shareholders to acquire a controlling interest in Ferrari, change our management or strategy or otherwise exercise influence over us, which may affect the market price of our common shares.
The provisions of our articles of association which establish the loyalty voting program may make it more difficult for a third party to acquire, or attempt to acquire, control of our company, even if a change of control were considered favorably by shareholders holding a majority of our common shares. As a result of the loyalty voting program, a relatively large proportion of the voting power of Ferrari could be concentrated in a relatively small number of shareholders who would have significant influence over us. Exor has a voting interest in Ferrari of approximately 33.4 percent. Piero Ferrari holds 10 percent of our common shares and, as a result of the loyalty voting mechanism, has approximately 15.4 percent of the voting power in our shares. In addition, Exor and Piero Ferrari informed us that they have entered into a shareholder agreement, summarized under “Item 7. Major Shareholders and Related Party Transactions—Shareholders' Agreement”. As a result, Exor and Piero Ferrari may exercise significant influence on matters involving our shareholders. Exor and Piero Ferrari and other shareholders participating in the loyalty voting program may have the power effectively to prevent or delay change of

17


control or other transactions that may otherwise benefit our shareholders. The loyalty voting program may also prevent or discourage shareholder initiatives aimed at changing Ferrari’s management or strategy or otherwise exerting influence over Ferrari. See “Item 10.B. Memorandum and Articles of Association—The Ferrari Shares, Articles of Association and Terms and Conditions of the Special Voting Shares.”
We are a Dutch public company with limited liability, and our shareholders may have rights different to those of shareholders of companies organized in the United States.
The rights of our shareholders may be different from the rights of shareholders governed by the laws of U.S. jurisdictions. We are a Dutch public company with limited liability (naamloze vennootschap). Our corporate affairs are governed by our articles of association and by the laws governing companies incorporated in the Netherlands. The rights of shareholders and the responsibilities of members of our board of directors may be different from the rights of shareholders and the responsibilities of members of our board of directors in companies governed by the laws of other jurisdictions including the United States. In the performance of its duties, our board of directors is required by Dutch law to consider our interests and the interests of our shareholders, our employees and other stakeholders, in all cases with due observation of the principles of reasonableness and fairness. It is possible that some of these parties will have interests that are different from, or in addition to, your interests as a shareholder.
We expect to maintain our status as a “foreign private issuer” under the rules and regulations of the SEC and, thus, are exempt from a number of rules under the Exchange Act of 1934 and are permitted to file less information with the SEC than a company incorporated in the United States.
As a “foreign private issuer,” we are exempt from rules under the Exchange Act of 1934, as amended (“the Exchange Act”) that impose certain disclosure and procedural requirements for proxy solicitations under Section 14 of the Exchange Act. In addition, our officers, directors and principal shareholders are exempt from the reporting and “short-swing” profit recovery provisions of Section 16 of the Exchange Act and the rules under the Exchange Act with respect to their purchases and sales of our common shares. Moreover, we are not required to file periodic reports and financial statements with the SEC as frequently or as promptly as U.S. companies whose securities are registered under the Exchange Act, nor are we required to comply with Regulation FD, which restricts the selective disclosure of material information. Accordingly, there may be less publicly available information concerning us than there is for U.S. public companies.
Our ability to pay dividends on our common shares may be limited and the level of future dividends is subject to change.
Our current dividend policy is set forth in “Item 5. Financial Information - Dividend policy”. Our payment of dividends on our common shares in the future will be subject to business conditions, financial conditions, earnings, cash balances, commitments, strategic plans and other factors that our Board of Directors may deem relevant at the time it recommends approval of the dividend. Our dividend policy is subject to change in the future based on changes in statutory requirements, market trends, strategic developments, capital requirements and a number of other factors. In addition, under our articles of association and Dutch law, dividends may be declared on our common shares only if the amount of equity exceeds the paid up and called up capital plus the reserves that have to be maintained pursuant to Dutch law or the articles of association. Further, even if we are permitted under our articles of association and Dutch law to pay cash dividends on our common shares, we may not have sufficient cash to pay dividends in cash on our common shares.
Our maintenance of two exchange listings may adversely affect liquidity in the market for our common shares and could result in pricing differentials of our common shares between the two exchanges.
Shortly following the completion of the Separation, we listed our common shares on the Mercato Telematico Azionario (“MTA”). The dual listing of our common shares may split trading between the NYSE and the MTA, adversely affect the liquidity of the shares and the development of an active trading market for our common shares in one or both markets and may result in price differentials between the exchanges. Differences in the trading schedules, as well as volatility in the exchange rate of the two trading currencies, among other factors, may result in different trading prices for our common shares on the two exchanges.

It may be difficult to enforce U.S. judgments against us.
We are organized under the laws of the Netherlands, and a substantial portion of our assets are outside of the United States. Most of our directors and senior management and our independent auditors are resident outside the United States, and all or a substantial portion of their respective assets may be located outside the United States. As a result, it may

18


be difficult for U.S. investors to effect service of process within the United States upon these persons. It may also be difficult for U.S. investors to enforce within the United States judgments against us predicated upon the civil liability provisions of the securities laws of the United States or any state thereof. In addition, there is uncertainty as to whether the courts outside the United States would recognize or enforce judgments of U.S. courts obtained against us or our directors and officers predicated upon the civil liability provisions of the securities laws of the United States or any state thereof. Therefore, it may be difficult to enforce U.S. judgments against us, our directors and officers and our independent auditors.
Because we are a recently formed company with a limited separate operating history we need to create separate administrative and governance functions.
Because we are a recently formed company we have not been required to maintain many of the administrative functions attendant to a listed company of our size. These include public company financial reporting, internal control and audit, compliance, legal and governance functions. It may take some time for us to employ the persons necessary to staff these administrative functions internally, requiring us to engage external consultants or staff, which may be more expensive. Further, this is a significant increase in the amount of employees we have historically employed for administrative matters, constituting a significant new expense. As a result of this increase in administrative requirements, there may be an adverse effect on our business, operating results and financial condition.
FCA creditors may seek to hold us liable for certain FCA obligations.
One step of our Separation from FCA included a demerger from FCA of our common shares previously held by it. In connection with a demerger under Dutch law, the demerged company may continue to be liable for certain obligations of the demerging company that exist at the time of the demerger, but only to the extent that the demerging company fails to satisfy such liabilities. Based on other actions taken as part of the Separation, we do not believe we retain any liability for obligations of FCA existing at the time of the Separation. Nevertheless, in the event that FCA fails to satisfy obligations to its creditors existing at the time of the demerger, it is possible that those creditors may seek to recover from us, claiming that we remain liable to satisfy such obligations. While we believe we would prevail against any such claim, litigation is inherently costly and uncertain and could have an adverse effect. See “Item 4.A. History and Development of the Company”
Risks Related to Taxation
As a result of the demergers and the merger in connection with the Separation, we might be jointly and severally liable with FCA for certain tax liabilities arisen in the hands of FCA.
Although the Italian tax authorities confirmed in a positive advance tax ruling issued on October 9, 2015 that the demergers and the Merger that was carried out in connection with the Separation would be respected as tax-free, neutral transactions from an Italian income tax perspective, under Italian tax law we may still be held jointly and severally liable, as a result of the combined application of the rules governing the allocation of tax liabilities in case of demergers and mergers, with FCA for taxes, penalties, interest and any other tax liability arising in the actions of FCA because of violations of its tax obligations related to tax years prior to the two Demergers described in the section “Item 4.A. History and Development of the Company.”
There may be potential “Passive Foreign Investment Company” tax considerations for U.S. holders.
Shares of our stock would be stock of a “passive foreign investment company,” or a PFIC, for U.S. federal income tax purposes with respect to a U.S. holder (as defined in “Item 10.E. Taxation—Material U.S. Federal Income Tax Consequences” below) if for any taxable year in which such U.S. holder held shares of our stock, after the application of applicable “look-through rules” (i) 75 percent or more of our gross income for the taxable year consists of “passive income” (including dividends, interest, gains from the sale or exchange of investment property and rents and royalties other than rents and royalties which are received from unrelated parties in connection with the active conduct of a trade or business, as defined in applicable Treasury Regulations), or (ii) at least 50 percent of our assets for the taxable year (averaged over the year and determined based upon value) produce or are held for the production of “passive income.” U.S. persons who own shares of a PFIC are subject to a disadvantageous U.S. federal income tax regime with respect to the income derived by the PFIC, the dividends they receive from the PFIC, and the gain, if any, they derive from the sale or other disposition of their shares in the PFIC.
While we believe that shares of our stock are not stock of a PFIC for U.S. federal income tax purposes, this conclusion is based on a factual determination made annually and thus is subject to change. Moreover, our common shares

19


may become stock of a PFIC in future taxable years if there were to be changes in our assets, income or operations. See “Item 10.E. Taxation—PFIC Considerations” for a further discussion.
 
The consequences of the loyalty voting program are uncertain.
No statutory, judicial or administrative authority directly discusses how the receipt, ownership, or disposition of special voting shares should be treated for Italian or U.S. tax purposes and as a result, the tax consequences in those jurisdictions are uncertain.
The fair market value of the special voting shares, which may be relevant to the tax consequences, is a factual determination and is not governed by any guidance that directly addresses such a situation. Because, among other things, our special voting shares are not transferable (other than, in very limited circumstances, together with the associated common shares) and a shareholder will receive amounts in respect of the special voting shares only if we are liquidated, we believe and intend to take the position that the fair market value of each special voting share is minimal. However, the relevant tax authorities could assert that the value of the special voting shares as determined by us is incorrect.
The tax treatment of the loyalty voting program is unclear and shareholders are urged to consult their tax advisors in respect of the consequences of acquiring, owning and disposing of special voting shares. See “Item 10.E. Taxation—Loyalty Voting Program” for a further discussion.

20


Item 4. Information on the Company
A. History and Development of the Company
Our company is named after our founder Enzo Ferrari.  An Alfa Romeo driver since 1924, Enzo Ferrari founded his own racing team, Scuderia Ferrari, in Modena in 1929 initially to race Alfa Romeo cars.  In 1939 he set up his own company, initially called Auto Avio Costruzioni.  In late 1943, Enzo Ferrari moved his headquarters from Modena to Maranello, which remains our headquarters to this day.  The Fiat group acquired a 50 percent stake in Ferrari S.p.A. in 1969, which increased to 90% in 1988, after the death of Enzo Ferrari, with the remaining 10% held by Enzo Ferrari’s son, Piero Ferrari.
We recently completed the separation of our business from FCA, through a series of transactions which we refer to as the “Separation”, as summarized below.
On October 19, 2015 we completed a restructuring intended to facilitate the initial public offering of our shares (the “IPO”) which resulted in the establishment of New Business Netherlands N.V., then renamed Ferrari N.V. (“Predecessor Ferrari”) as the holding company of the Ferrari group holding a 100 percent interest in Ferrari S.p.A. Predecessor Ferrari was originally established as a 100 percent owned subsidiary of FCA on May 24, 2013. As a result of the restructuring, immediately prior to the IPO, FCA held approximately 90% of Predecessor Ferrari common shares and special voting shares and Piero Ferrari, the son of our founder, held the remainder of Predecessor Ferrari common shares and special voting shares. As part of the restructuring, Predecessor Ferrari incurred debt in order to optimize the capital structure of Predecessor Ferrari as a public company through the issue by Predecessor Ferrari to FCA of a promissory note (the “FCA Note”).

On October 20, 2015, FCA priced an IPO of shares of Predecessor Ferrari shares representing approximately 10% of Predecessor Ferrari’s common share capital and, on October 21, 2015, such common shares started trading on the New York Stock Exchange under the ticker symbol “RACE”. Following completion of the IPO, FCA owned approximately 80% of Predecessor Ferrari common shares, Piero Ferrari held approximately 10% of Predecessor Ferrari common shares and investors in the IPO held approximately 10% of Predecessor Ferrari common shares.

On December 16, 2015, Ferrari repaid the FCA Note with the proceeds of a loan drawn under a syndicated credit facility with a group of lenders.

The remaining steps of the Separation were carried out through the following transactions, which occurred between January 1 and January 3, 2016. Through two consecutive demergers under Dutch law (the “Demergers”), the equity interests in Predecessor Ferrari previously held by FCA, corresponding to approximately 80% of Predecessor Ferrari common share capital, were transferred to holders of FCA common shares and FCA mandatory convertible securities (“MCS”). Immediately after the Demergers, Predecessor Ferrari merged with and into Ferrari, as surviving company (the “Merger”). Upon effectiveness of the Merger, Ferrari became the holding company of the Ferrari business.

Pursuant to the Separation, (i) holders of Predecessor Ferrari common shares received one Ferrari common share for each Predecessor Ferrari common share and one Ferrari special voting share for each Predecessor Ferrari special voting share held; (ii) FCA shareholders received one Ferrari common share for every 10 FCA common shares and one Ferrari special voting share for every 10 FCA special voting shares held; and (iii) holders of MCS received 0.77369 Ferrari common shares for each MCS unit (consisting of $100 in notional amount of MCS) held. Ferrari special voting shares held by FCA prior to the Demergers are no longer outstanding.

On January 4, 2016, the business day following effectiveness of the Merger, Ferrari common shares began trading on the Mercato Telematico Azionario, the stock exchange managed by Borsa Italiana.

21


B. Business Overview

Business Summary
Ferrari is among the world’s leading luxury brands focused on the design, engineering, production and sale of the world’s most recognizable luxury performance sports cars. Our brand symbolizes exclusivity, innovation, state-of-the-art sporting performance and Italian design and engineering heritage. Our name and history and the image enjoyed by our cars are closely associated with our Formula 1 racing team, Scuderia Ferrari, the most successful team in Formula 1 history. From the inaugural year of Formula 1 in 1950 through the present, Scuderia Ferrari has won 224 Grand Prix races, 16 Constructor World titles and 15 Drivers’ World titles. We believe our history of excellence, technological innovation and defining style transcends the automotive industry, and is the foundation of the Ferrari brand and image. We design, engineer and produce our cars in Maranello, Italy, and sell them in over 60 markets worldwide through a network of 176 authorized dealers operating 198 points of sale.
We believe our cars are the epitome of performance, luxury and styling. We currently sell seven models, including four sports cars (488 GTB, 488 Spider, F12berlinetta and our special series F12 Tour de France, or F12tdf) and three GT cars (California T, FF and our new GTC4Lusso). The 488 GTB and the 488 Spider were launched in 2015 to replace the 458 Italia and 458 Spider, which we produced and sold in 2015 but are now discontinued. The F12tdf, unveiled in October 2015, is our latest special series and follows the 458 Speciale and 458 Speciale A, which we produced and sold in 2015 but are now discontinued. In February 2016, we unveiled the new GTC4Lusso, our latest GT car, which will replace the FF, with sales expected to begin in the second semester of 2016. We also produce a limited edition supercar, LaFerrari, and very limited editions series (Fuoriserie) and one-off cars.

In 2015, we shipped 7,664 cars, and recorded net revenues of €2,854 million, net profit of €290 million, adjusted earnings before interest, taxes, depreciation, and amortization (Adjusted EBITDA) of €748 million and earnings before interest and taxes (EBIT) of €444 million. For additional information regarding Adjusted EBITDA, which is a non-GAAP measure, including a reconciliation of Adjusted EBITDA to net profit, see “Item 5. Operating and Financial Review—Non-GAAP Financial Measures—EBITDA and Adjusted EBITDA.”

We pursue a low volume production strategy in order to maintain a reputation of exclusivity and scarcity among purchasers of our cars and deliberately monitor and maintain our production volumes and delivery wait-times to promote this reputation. We divide our regional markets into EMEA, Americas, Greater China and Rest of APAC, representing respectively 44 percent, 34 percent, 8 percent and 14 percent of units shipped in 2015.

We license the Ferrari brand to a selected number of producers and retailers of luxury and lifestyle goods. In addition, we design, source and sell Ferrari-branded products through a network of 25 franchised, 12 owned Ferrari stores and on our website. As one of the world’s most recognized premium luxury brands, we believe we are well positioned to selectively expand the presence of the Ferrari brand in attractive and growing lifestyle categories consistent with our image, including sportswear, watches, accessories, consumer electronics and theme parks which we believe enhance the brand experience of our loyal following of clients and Ferrari enthusiasts.

We focus our marketing and promotion efforts in the investments we make in our racing activities, in particular Scuderia Ferrari’s participation in the Formula 1 World Championship, which is one of the most watched annual sports series in the world, with approximately 420 million television viewers annually. Although our most recent Formula 1 world title was in 2008, we are enhancing our focus on Formula 1 activities with the goal of improving recent racing results and restoring our historical position as the premier racing team in Formula 1. We believe that these activities support the strength and awareness of our brand among motor enthusiasts, clients and the general public.
  
We will continue focusing our efforts on protecting and enhancing the value of our brand to preserve our strong financial profile and participate in the premium luxury market growth. We intend to selectively pursue controlled and profitable growth in existing and emerging markets while expanding the Ferrari brand to carefully selected lifestyle categories.

22


Industry Overview
Luxury performance cars share several characteristics with other luxury goods such as quality, aesthetics, rarity, exclusivity and a high degree of non-functional associations all of which leads to significantly higher pricing as compared to mass market goods within the same category. While affected by global macroeconomic conditions, the luxury goods market is also impacted by several more specific factors, such as, in recent years, the significant economic growth and wealth creation in certain emerging economies and rising levels of affluence and demand from the emerging middle and upper classes in Asia and a general trend towards urbanization. Particularly following the 2008-2009 downturn, this has led the global luxury goods market to return to perform better than global GDP, as shown in the chart below.
 


Sources: Bain & Company, 2015 for Global Personal Luxury Goods Market and World Bank Data, 1995-2014 for Global GDP.
Within the luxury goods market, we define our target market for luxury performance cars as two-door cars powered by engines producing more than 500 hp and selling at a retail price in excess of Euro 150,000 (including VAT). The luxury performance car market historically has followed relatively closely growth patterns in the broader luxury market. The luxury performance car market is generally affected by global macroeconomic conditions and, although we and certain other manufacturers have proven relatively resilient, general downturns can have a disproportionate impact on sales of luxury goods in light of the discretionary nature of consumer spending in this market. Furthermore, because of the emotional nature of the purchasing decision, economic confidence and factors such as expectations regarding future income streams as well as the social acceptability of luxury goods may impact sales.
Following the sharp recession of 2008-2009, the luxury performance car market has been resilient to further economic downturns and stagnation in the broader economy, also a result of the increase of new product launches, although the luxury performance car market has not yet returned to the pre-recession levels. A sustained period of wealth creation in several Asian countries and, to a lesser extent, in the Americas, has led to an expanding population of potential consumers of luxury goods. Developing consumer preferences in the Asian markets, where the newly affluent are increasingly embracing western brands of luxury products, have also led to higher demand for cars in our segment, which are all produced by established European manufacturers.
 
Additionally, the growing appetite of younger affluent purchasers for luxury performance cars has led to new entrants, which in turn has resulted in higher sales overall in the market.

23


Unlike in other segments of the broader luxury market, however, in the luxury performance car market, a significant portion of demand is driven by new product launches. The market share of individual producers fluctuates over time reflecting the timing of product launches. New launches tend to drive sales volumes even in difficult market environments because the novelty, exclusivity and excitement a new product is capable of creating and capturing its own demand from clients.

•
Data for the Luxury Performance Car Industry include all two door GT and sports cars with power above 500hp, and retail price above Euro 150,000 (including VAT) sold by Aston Martin, Audi, Bentley, Ferrari, Lamborghini, McLaren, Mercedes Benz, Porsche and Rolls-Royce.
•
Ferrari data based on the 22 top countries (excluding Middle East countries) for Ferrari annual registrations and sales (which accounted for approximately 85% of the total Ferrari shipments in 2015).
•
Data for the Luxury Performance Car Industry based on units registered (in USA, Brazil, Japan, Hong Kong, Taiwan, Australia, United Kingdom, Germany, France, Switzerland, Italy, Spain, Sweden, Netherlands, Belgium and Austria) or sold (in South Korea, Thailand, China, New Zealand, Singapore and Indonesia) in each period. Source: USA: US Maker Data Club, Brazil-ANFAVEA; Austria-OSZ; Belgium-FEBIAC; France-SIV; Germany-KBA; UK-SMMT; Italy-UNRAE; Netherlands- VWE; Spain- TRAFICO; Sweden-BranschData; Switzerland-ASTRA; China-China Automobile Industry Association-DataClub; Hong Kong-Hong Kong Motor Trader Association; Taiwan-Ministry of Transportation and Communications; Australia-VFACTS-S; Japan-JAIA; Indonesia-GAIKINDO; New Zealand-VFACTS; Singapore-LTA, MTA (Land Transport Authority, Motor Trader Associations); South Korea-KAIDA; Thailand -Department of Land Transportation

The luxury performance car market has not yet returned to pre-recession levels. However, as shown in the chart above, our sales in recent years have proven less volatile than our competitors’. We believe this is due to our strategy of maintaining low volumes compared to demand, as well as the higher number of models in our range and our more frequent product launches compared to our competitors.
 
In 2015, our market share in the luxury performance car market was 24 percent (22.9 percent in 2014), with a 24 percent (25 percent in 2014) market share in the sports car segment and 24 percent (18.8 percent in 2014) market share in the GT segment. The chart below set forth our market shares in all geographical markets in which we operate.
 

24


•
Data for the Luxury Performance Car Industry include all two door GT and sports cars with power above 500hp, and retail price above Euro 150,000 (including VAT) sold by Aston Martin, Audi, Bentley, Ferrari, Lamborghini, McLaren, Mercedes Benz, Porsche and Rolls-Royce.
•
Ferrari data based on the 22 top countries (excluding Middle East countries) for Ferrari annual registrations and sales (which accounted for approximately 85% of the total Ferrari shipments in 2015).
•
Data for the Luxury Performance Car Industry based on units registered (in USA, Brazil, Japan, Hong Kong, Taiwan, Australia, United Kingdom, Germany, France, Switzerland, Italy, Spain, Sweden, Netherlands, Belgium and Austria) or sold (in South Korea, Thailand, China, New Zealand, Singapore and Indonesia) in each period. Source: USA: US Maker Data Club, Brazil-ANFAVEA; Austria-OSZ; Belgium-FEBIAC; France-SIV; Germany-KBA; UK-SMMT; Italy-UNRAE; Netherlands- VWE; Spain- TRAFICO; Sweden-BranschData; Switzerland-ASTRA; China-China Automobile Industry Association- DataClub; Hong Kong- Hong Kong Motor Trader Association; Taiwan-Ministry of Transportation and Communications; Australia-VFACTS-S; Japan-JAIA; Indonesia-GAIKINDO; New Zealand-VFACTS; Singapore-LTA, MTA (Land Transport Authority, Motor Trader Associations); South Korea-KAIDA; Thailand-Department of Land Transportation.
While we monitor our market share as an indicator of our brand appeal, we do not regard market share in the luxury performance market as particularly relevant as compared to other segments of the automotive industry. We are not focused on market share as a performance metric. Instead, we deliberately manage our supply relative to demand, to defend and promote our brand exclusivity and premium pricing. In recent years, we have produced a substantially constant number of cars per year in furtherance of that strategy, and, therefore, our market share has decreased as a result of the increase in overall market volumes.
Competition
Competition in the luxury performance car market is concentrated in a fairly small number of producers, including both large automotive companies as well as small producers exclusively focused on luxury cars, like us. The luxury performance car market includes a sports car segment and a GT segment.

In the sports car segment our products, are the 488 GTB, 488 Spider, F12berlinetta and our latest special series, F12tdf , and our principal competitors are Lamborghini (Huracán, Aventador and Aventador SV), McLaren (650S, 675LT, 570S and 540C), Porsche (911 Turbo, Turbo S and GT3 RS), Mercedes (SL 63/65 AMG), Aston Martin (Vanquish and V12 Vantage/S) and Audi (R8 V10 and R8V10 Plus). In the GT segment our products are the California T, FF and new GTC4Lusso (which will be replacing FF in the second semester of 2016) models and our principal competitors are Rolls-Royce (Wraith), Bentley (Continantal GT/GTC, V12 and V8, Speed and S version and GT3-R), Aston Martin (DB9) and Mercedes (CL 63/65 AMG and S Coupé 63/65 AMG).
In recent years, the market has shifted somewhat with an increased focus on the GT segment and the lower priced range of the sports car market, with larger automotive groups expanding their offering of premium cars to enter the luxury performance car market.

25


Competition in the luxury performance car market is driven by the strength of the brand, and the appeal of the products in terms of performance, styling, novelty and innovation as well as on the manufacturers’ ability to renew its product offerings regularly in order to continue to stimulate customer demand. Larger automotive groups with a product offering in the luxury performance car market typically have larger financial resources compared to the small luxury car producers and therefore may have more flexibility in planning for product launches and capital spending over time.

Competition among similarly positioned luxury performance cars is also driven by price and total cost of ownership. We believe that the resilience of the value of our cars after a period of ownership is an important competitive factor because it decreases the total cost of ownership for our clients and promotes repeat purchases.
Sports and GT Cars
Our current product range consists of seven models, including six range models and one special series, equipped with either eight or twelve cylinder engines and divided into two classes: Sports cars and GT cars. We target end clients seeking high performance cars with distinctive design and state of the art technology. Within these parameters, we offer different models to meet our clients’ varying needs and to differentiate our line-up from that of other manufacturers’, ranging from the exceptional performance of our Sports cars to the luxury and drivability of our GT cars. Our diversified product offering includes different architectures (such as front-engine and mid-rear engine), engine sizes (V8 and V12), body styles (such as coupes and spiders), and seating (2 seaters and 2+2 seaters).
Our sports cars are characterized by compact bodies, a design guided by performance and aerodynamics, and often benefit from technologies initially developed for our Formula 1 single-seaters. They favor performance over comfort, seeking to provide a driver with an immediate response and superior handling, leveraging state of the art vehicle dynamics components and controls. In our sports car class, we offer three models: two of which are equipped with mid-rear V8 engines, namely the 488 GTB (with 670 hp) which, starting from the second half of 2015, has replaced the 458 Italia, the 488 Spider (with 670 hp) which, starting from the fourth quarter of 2015, has replaced the 458 Spider; and one equipped with a front V12 engine, the F12berlinetta (with 740 hp). Our GT cars, while maintaining the performance expected of a Ferrari, are characterized by more refined interiors with a higher focus on comfort and quality of life on-board. In our GT class, we offer one model equipped with our V8 engine with 560 hp, the California T, and two models equipped with our V12 engine, the FF, with 660hp (our first all-wheel drive four seat car) and the new GTC4Lusso which will be replacing FF starting from the second semester of 2016. We also from time to time design, engineer and produce special series cars which are based on our range models but introduce novel product concepts. These cars are characterized by significant hardware and software mechanical modifications designed to enhance performance and drivability. Our special series cars are particularly targeted to collectors and, from a commercial and product development standpoint, they facilitate the transition from existing to new range models. Our current special series model is the F12tdf, equipped with a V12 engine with 780 hp. Our 458 Speciale and the 458 Speciale Aperta special series were discontinued in 2015.
In addition to our range models and special series described above, we also continue the longstanding Ferrari tradition of limited edition supercars, very limited series (fuoriserie) and one-off cars. Our limited edition supercars, which we typically launch in seven to 10 year intervals, are the highest expression of Ferrari performance and are often the forerunners of technological innovations for the future range models, with innovative features and futuristic design. We launched our latest supercar, LaFerrari, in 2013 with a limited production run of 499 models. Our fuoriserie cars can be based on range or special series mechanical components, but are characterized by important exterior body modifications resulting in an innovative product by concept or design. These exclusive cars are linked to specific events or celebrations, such as the Sergio (named after longtime designer of Ferrari cars, Sergio Pininfarina) and the F60 America (celebrating our 60th anniversary of sales in the United States). Our one-off cars are designed to meet the varying needs of our most loyal and discerning clients. They reflect the exact design and specifications required by the clients, and are produced as a single, unique vehicle. (See “—Limited Edition Supercars, Fuoriserie and One-Offs”).

26


The table below sets forth our unit shipments for the years ended December 31, 2015, 2014 and 2013, by geographic market:
(Number of cars and % of total cars)
 
 
For the years ended December 31,
 
 
 
2015
 
%
 
2014
 
%
 
2013
 
%
EMEA
 
 
 
 
 
 
 
 
 
 
 
 
 
UK
 
 
740

 
9.7
%
 
705

 
9.7
%
 
686

 
9.8
%
Germany
 
 
595

 
7.8
%
 
616

 
8.5
%
 
659

 
9.4
%
Switzerland
 
 
340

 
4.4
%
 
332

 
4.6
%
 
350

 
5.0
%
Italy
 
 
285

 
3.7
%
 
243

 
3.3
%
 
206

 
2.9
%
France
 
 
274

 
3.6
%
 
253

 
3.5
%
 
273

 
3.9
%
Middle East(1)
 
 
456

 
5.9
%
 
521

 
7.2
%
 
472

 
6.7
%
Rest of EMEA(2)
 
 
661

 
8.6
%
 
604

 
8.3
%
 
663

 
9.5
%
Total EMEA
 
 
3,351

 
43.7
%
 
3,274

 
45.1
%
 
3,309

 
47.3
%
Americas(3)
 
 
2,640

 
34.4
%
 
2,462

 
33.9
%
 
2,382

 
34.0
%
Greater China(4)
 
 
610

 
8.0
%
 
675

 
9.3
%
 
572

 
8.2
%
Rest of APAC(5)
 
 
1,063

 
13.9
%
 
844

 
11.6
%
 
737

 
10.5
%
Total
 
 
7,664

 
100.0
%
 
7,255

 
100.0
%
 
7,000

 
100.0
%
______________________________
(1)
Middle East includes the United Arab Emirates, Saudi Arabia, Bahrain, Lebanon, Qatar, Oman and Kuwait.
(2)
Rest of EMEA includes Africa and the other European markets not separately identified.
(3)
Americas includes the United States of America, Canada, Mexico, the Caribbean and Central and South America.
(4)
Greater China includes China, Hong Kong and Taiwan.
(5)
Rest of APAC mainly includes Japan, Australia, Singapore, Indonesia and South Korea.

The table below sets forth our unit shipments for the years ended December 31, 2015, 2014 and 2013, with a breakdown of Sports and GT cars:
(Number of cars)
 
 
 
For the years ended December 31,
 
 
 
 
 
2015
2014
 
2013
Sports
 
 
 
 
 
 
 
 
V8(1)
 
 
 
 
3,534

3,651

 
3,944

V12(2)
 
 
 
 
1,169

1,565

 
1,401

Total Sports
 
 
 
 
4,703

5,216

 
5,345

GT
 
 
 
 
 
 
 
 
V8
 
 
 
 
2,638

1,645

 
1,219

V12
 
 
 
 
323

394

 
436

Total GT
 
 
 
 
2,961

2,039

 
1,655

TOTAL
 
 
 
 
7,664

7,255

 
7,000

______________________________
(1)
Includes 458 Speciale and 458 Speciale A for 2015 and 2014 and 458 Speciale for 2013.
(2)
Includes LaFerrari starting from the fourth quarter of 2013.

We are also actively engaged in after sales activities driven, among other things, by the objective of preserving and extending the market value of the cars we sell. We believe our cars’ performance in terms of value preservation after a period of ownership significantly exceeds that of any other brand in the luxury car segment. High residual value is important to the primary market because clients, when purchasing our cars, take into account the expected resale value of the car in assessing the overall cost of ownership. Furthermore, a higher residual value potentially lowers the cost for the owner to switch to a new model thereby supporting client loyalty and promoting repeat purchases.
Range Models and Special Series
Our products include the range models and special series described below. Our range models currently include three sports cars, 488 GTB, 488 Spider and F12berlinetta, and three GT cars, California T, FF and GTC4Lusso.

27


The 488 GTB and the 488 Spider were launched in 2015 to replace the 458 Italia and 458 Spider, which we produced and sold in 2015 but are now discontinued. In February 2016, we unveiled the new GTC4Lusso, our latest GT car, which will be replacing the FF starting from the second semester of 2016.

We also offer special series cars based on our range models. These cars are characterized by significant hardware and software modifications (engine, aerodynamics, and dynamics among others), designed to enhance performance and drivability when compared to current range models. Our latest special series, unveiled in October 2015, is the F12tdf, which is based on the F12berlinetta. The special series models 458 Speciale and 458 Speciale A, were produced and sold in 2015 but are now discontinued.

All of our range and special series models feature highly customizable interior and exterior options such as forged rims, luxury leathers, seat style, panoramic roof, dashboard and steering wheel inserts (see “—Personalization Program and Tailor Made Program”).
488 GTB
The 488 GTB is a two seater berlinetta with a 670 hp mid-rear mounted V8 engine. It was launched in March 2015, 40 years after we unveiled our first ever mid-rear-engined V8 model (the 308 GTB). The model’s exterior and interior design was developed entirely by Ferrari Design Centre. Its large signature air intake scallop evokes the original 308 GTB and is divided into two sections by a splitter. Designed for track-level performance, the 488 GTB can also provide enjoyment to non-professional drivers for everyday use. Accelerating from 0-200 km/h in only 8.3 seconds, its new 3902 cc V8 turbo engine is at top of the class for power output, torque and response times. In the cabin, the seamless integration of the new satellite control clusters, angled air vents and instrument panel heightens the sense that the cockpit is completely tailored around the driver, leading to an extremely sporty yet comfortable ambiance. The 488 GTB has already collected various accolades including: Autocar (UK) – 2015 ‘Best Driver’s Car’. Sport Auto (Germany) – 2015 Best Brands Awards – “Best Coupé over €150,000” and Middle East Car of the Year (MECOTY) – ‘Best Supercar 2015’.

28


488 Spider    
Our latest sports car, the 488 Spider, launched in September 2015, is a two seat coupe with a 670 hp mid-rear mounted V8 engine. Its retractable hard top, which saves approximately 25 kg on a soft top, unfolds and retracts in 14 seconds and can also be raised or lowered while the car is moving. If offers the full experience of sports car driving, especially on mixed and challenging surfaces, but aims to cater to those who do not need to constantly push their car to the limit on the track. Styled entirely in-house at Ferrari Design Centre and designed around the retractable hard top concept, the 488 Spider combines the prowess of the 488 GTB coupe’s mid-rear V8 with innovations in aerodynamics, including a new Ferrari-patented blown spoiler, which allows air to enter an intake at the base of the rear screen and exit via the bumper and reduces drag. The 488 Spider accelerates from 0 to 100 km/h in 3.0 seconds and from 0 to 200 km/h in 8.7 seconds and offers exceptional dynamic behavior, with close to no turbo lag and response time of just 0.8 seconds. Shipments of the first 488 Spider models started in the fourth quarter of 2015.
F12berlinetta
Launched in 2012, the F12berlinetta is equipped with a 740 hp V12 engine. Built around evolved transaxle architecture with cutting-edge components and control systems, it sets a new standard in aerodynamics and handling. Though conceived as a performance automobile, the F12berlinetta is capable of both high speed and long-distance driving. In 2013 it won the International Engine of the Year Award in both the Best Performance category and Best Engine above 4.0 liters category. The F12berlinetta is the first model launched since the creation of Ferrari’s in-house styling studio and was awarded the Compasso d’Oro (Golden Compass) award in 2014, the first Ferrari model to receive this distinction.

29


F12tdf

Unveiled in October 2015, the F12tdf is our latest special series sports car (based on the F12berlinetta), which pays tribute to the Tour de France, the legendary endurance road race that Ferrari dominated in the 1950s and 1960s. Designed entirely in-house at Ferrari Design Centre, the F12tdf is a two seat coupe equipped with a 6262cc 65° V12 engine with a maximum power of 780 hp (compared to the 740 hp of F12berlinetta) at 8,500 rpm. The F12tdf is the most powerful high performance Ferrari sports car ever built. Its engine’s sporty response is assured by a maximum torque of 705 Nm (up from 690 Nm) at 6,750 rpm with 80% of such force already available at 2,500 rpm. The F12tdf is equipped with a new Ferrari innovative rear-wheel steering system, known as the Virtual Short Wheelbase (or Passo Corto Virtuale), which together with other vehicle dynamic control systems guarantees the steering wheel response times and turn-in of a competition car while increasing stability at high speed. These factors combine to produce an outstanding acceleration: 0-100 km/h in 2.9 seconds and 0-200 km/h in 7.9 seconds.
California T
The California T, which followed the great success of our 2008 California model, is equipped with a 560 hp V8 turbo engine. Launched in 2014, it is the only GT car in the segment to combine a retractable hard top, rear seats and a ski passage to the spacious trunk. Its new turbocharged V8 engine comes with a variable boost management system. This makes it the only turbo engine in the world with close to no turbo lag. It also features a revised rear and interior design and a 15 percent reduction in fuel consumption compared to its predecessor. Its lines, penned by Ferrari Design Centre in collaboration with Pininfarina, were awarded the 2015 Red Dot Design Award. In January 2016, we announced the introduction of the Handling Speciale Package (“HSP”) on the California T. The HSP, designed to ensure increased performance, handling and response for a more sporty driving experience, will be presented at the Geneva Motor Show in March 2016.

30


FF
Launched in 2011, the FF, our first four-wheel drive model, is equipped with a 660 hp V12 engine. Among its main innovations, the FF features the patented lightweight 4RM system, which transmits torque to all four wheels, thus allowing a 50 percent saving in weight compared to a traditional four-wheel drive system and a lower center of gravity to be maintained. Part of our GT class, the Pininfarina-styled FF features an elegant two door, four seat sporting layout, and the best cabin and luggage space and occupant comfort in its class.
GTC4Lusso

Unveiled in February 2016, the GTC4Lusso is our latest four-seater four-wheel drive Grand Tourer model. Its name recalls historic Ferrari models, such as the 330GT 2+2 and the 250 GT Berlinetta Lusso, renowned for their combination of elegance and performance. The Ferrari Design-penned GTC4Lusso adds a further refinement to the shooting brake coupe style to produce a streamlined, tapered silhouette. The GTC4Lusso is equipped with a 6262cc 65° V12 engine with a maximum power of 680 hp, maximum speed of 335/Km/h and acceleration of 0-100 km/h in 3.4 seconds The Ferrari-patented integrated four wheel drive and steering system allows the driver to effortlessly handle the exceptional torque in a variety of road conditions. Production of the GTC4Lusso is expected to start in the second quarter of 2016, and shipments are expected to start in the third quarter of 2016.

31


Personalization Program and Tailor Made Program
All of our models feature highly customizable interior and exterior options, which together comprise our personalization catalogue. Some of these options include custom shop wheels, alternate brake caliper colors, parking cameras, magneride dual mode suspension, sport exhaust systems, different panoramic roof options, various door configurations, steering wheel inserts and state of the art custom high fidelity sound systems.
With our “Special Equipment” program, we offer clients additional customization choices for their car. Our specialists are able to guide clients in creating a very customized car through a wide catalog of special items such as different types of rare leathers, custom stitching, special paints, special carbon fiber, and personalized luggage sets designed to match the car’s interior.
The “Atelier” and “Tailor Made” programs provide two additional levels of personalization in accordance with the expectations of our clients. Both programs benefit from the Maranello factory environment that inspires clients’ special requests. In particular, in the “Tailor Made” program a dedicated Ferrari designer assists clients in selecting and applying virtually any specific design element chosen by the client. Our clients benefit from a large choice of finishes and accessories in an array of different materials (ranging from cashmere to denim), treatments and hues. To assist our clients’ choice we also offer three collections inspired by Ferrari’s own tradition: Scuderia (taking its lead from our sporting history), Classica (bringing a modern twist to the styling cues of our signature GT models) and Inedita (showcasing more experimental and innovation-led personalization).
Limited Edition Supercars, Fuoriserie and One-Offs
In line with our tradition of supercars starting with the 288GTO in 1984 through to the Enzo, which we launched in 2002, we also produce limited edition supercars. These are the highest expression of Ferrari road car performance at the time and are often the forerunners of technological innovations for future range models, with innovative features and futuristic design. Furthermore, in connection with certain events or celebrations, we also launch very limited edition cars (our fuoriserie). These models can be offered globally, or may be limited to specific local markets. Based on an exotic product concept not available on the standard Ferrari model range, these cars feature completely unique design and specifications compared to our other models.
LaFerrari
Launched in 2013, LaFerrari is the latest in our line of supercars. Planned for a total production run of just 499 cars, LaFerrari is our first car with hybrid technology. Alongside its powerful rear-wheel drive layout V12 engine (which generates 800 hp), the hybrid system comprises two electric motors and a special battery consisting of cells developed by the Scuderia Ferrari where the F138 KERS technology was pioneered. Because the battery generates an additional 163 hp, LaFerrari has a combined total of 963 hp. LaFerrari’s HY-KERS system is designed to achieve seamless integration and rapid communication between the V12 and electric motor, thus blending extreme performance with maximum efficiency. Thanks to the hybrid technology, LaFerrari generates almost 50 percent more horsepower than the Enzo, its predecessor, and 220 hp more than the F12, our most powerful car to date. LaFerrari is the first Ferrari road car to have been entirely styled in house by Ferrari Design Centre. It was granted the 2014 Red Dot Design Award and the Design of the Year Award at the 2014 AutoDesign Awards.

32


F60 America
The F60 America, a V12 open air roadster, celebrates our 60 years in the United States and is available to U.S. clients only. It combines two of our American clients’ great passions-the modified V12 engine and open-top driving. The exterior is finished in North American Racing Team livery, with special 60th anniversary prancing horse badges adorning the wheel arches. Inside, the F60America features bespoke cabin trim, with the driver’s side finished in red and the passenger side in black-a nod to our historic competition cars. We have pre-sold ten F60s. Production started in the second half of 2015 and the first car was delivered in January 2016.
One-Offs
Finally, in order to meet the varying needs of our most loyal and discerning clients, we also from time to time produce one-off models. While based on the chassis and equipped with engines of one of the current range models for registration purposes, these cars reflect the exact exterior and interior design and specifications required by the clients, and are produced as a single, unique car. One of the most iconic models to have emerged from our One-Off program are the SP12 EC and the F12 TRS, a radical two-seat roadster created on the platform of the F12berlinetta in 2014. The program is set to expand due to increasing demand.
    

Non-Registered Racing Cars
Based on our Sports and GT cars, we also develop and manufacture special racing cars. These cars are not registered for use on the road and may only be used on track. Clients and private teams purchase these cars for the purpose of participating

33


in our non-competitive and competitive client events, such as Corse Clienti (see “—Client Relations”), or competing in other GT racing competitions, such as the GT2, GT3 and Grand-Am.
In 2015, we produced a total of 26 458 Challenge cars, which are reserved for owners competing in our mono-brand Ferrari Challenge championship. In 2015, we also produced a total of seven 458 GT cars aimed at drivers participating in Grand Tourism competitions worldwide. In 2015 we also started the development and production of the new 488 GT cars, shipments of which will commence at the beginning of 2016.


Since 2005, we have also operated our XX Program, a non-competitive “owner-test drivers” program organized at some of the best known race tracks in Europe, Asia and North America. Through the XX Program, we test advanced solutions and technological innovations by providing a select group of clients the opportunity to drive cars enhanced with superior power and performance characteristics. As part of this program, we have developed the FXX K, based on LaFerrari, shipments of which started in the second quarter of 2015: we shipped a total of 20 cars in 2015. Although conceived as a track-only model, the FXX K was specially styled by Ferrari Design Centre working closely with the aerodynamics engineers. The FXX K received the Red Dot “Best of the Best” Design Award in 2015, one of the most recognized design awards in the world.
Sales and After-Sales
Our commercial team, which includes 211 employees at December 31, 2015, is organized in four geographic areas covering our principal regional end markets: (i) EMEA, which is also responsible for South Africa and India, (ii) Americas, (iii) Greater China (which includes The People’s Republic of China, Taiwan and Hong Kong), and (iv) Rest of APAC (which includes the rest of Asia and Oceania).
Dealer network
We sell our cars exclusively through a network of authorized dealers (with the exception of one-offs which we sell directly to end clients). In our larger markets we act as importer either through wholly owned subsidiaries or, in China, through a subsidiary partly owned by a local partner, and we sell the cars to dealers for resale to end clients. In smaller markets we generally sell the cars to a single importer. At December 31, 2015, our network comprised 176 dealers operating 198 points of sale.
We do not own dealerships and, while our strategy does not contemplate owning dealerships, we retain flexibility to consider all market requirements from time to time.

We believe that our careful and strict selection of the dealers that sell our cars is a key factor for promoting the integrity and success of our brand. Our selection criteria are based on the candidates’ reputation, financial solidity and track record. We are also mindful to select dealers who are able to provide an in-store experience and to market and promote our cars in a manner intended to preserve the Ferrari brand integrity and to ensure the highest level of client satisfaction.

34


While dealers may hold multiple franchises, we enjoy a high degree of prominence and level of representation at each point of sale, where most of the client interface and retail experience is exclusive to Ferrari. Our network and business development team works directly with individual dealers to ensure various standards are met. All dealers must conform to our rigorous design, layout and corporate identity guidelines ensuring uniformity of the image and client interface. Through the Ferrari Academy we provide training to dealers for sales, after sales and technical activities to ensure our dealer network delivers a consistent level of market leading standards across diverse cultural environments. We train and monitor dealers intensively and we collect and observe data relating to their profitability and financial health in order to prevent or mitigate any adverse experience for clients arising from a dealer ceasing to do business or experiencing financial difficulties. Our representatives visit dealerships regularly to measure compliance with our operating standards. We have the right to terminate dealer relationships in a variety of circumstances including failure to meet performance or financial standards, or failure to comply with our guidelines.
We provide a suggested retail price or a maximum retail price for all of our cars, but each dealer is free to negotiate different prices with clients and to provide financing. Although many of our clients in certain markets purchase our cars from dealers without financing, we provide direct or indirect finance and leasing services to retail clients and to dealers. (See “—Financial Services”).
The total number of our dealers has been relatively stable in recent years and the number of dealers as well as their geographical distribution tends to reflect closely the development or expected development of sales volumes to end clients in our various markets over time. Dealer turnover is relatively low, reflecting the strength of the franchise and our selection processes, but is sufficient to guarantee an orderly renewal over time and to stimulate the network’s health and performance.
The chart below sets forth the geographic distribution of our 198 points of sale at December 31, 2015:
    
Our sales are diversified across our dealer network, with the largest dealer representing approximately 2.4 percent of sales, and our 15 largest dealers representing 24 percent of sales.
As part of our supply and demand management, we determine allocations based on various metrics including expected developments in the relevant market, the number of cars sold historically by the various dealers, current order book of dealers and the average waiting time of the end client in the relevant market. We have recently introduced an enhanced order reporting system which allows us to collect and monitor information regarding end client orders and assists us in production planning, production allocation and dealer management.

35


Parts
We supply parts for current and older models of Ferrari to our authorized dealer network.     In addition to substitution of spare parts during the life of the car, sales are driven by clients’ demand for parts to customize their cars and maximize performance, particularly after a change in ownership and to compete in the Ferrari Challenge and other client races. We also supply parts to Ferrari models currently out of production, with stocks dating back to 1995. The stock of parts for even older models is currently owned and managed by a third party which in some cases also manufactures out-of-stock parts based on our design. The sale of parts is a profitable component of our product mix and it is expected to benefit from the increase in the number of Ferrari cars in circulation.
After Sales
Dealers provide after sale services to clients, either at facilities adjacent to showrooms, or in stand-alone service points across 240 facilities worldwide. After sales activities are very important for our business to ensure the client’s continued enjoyment of the car and the experience. Therefore, we enforce a strict quality control on our dealers’ services activities and we provide continued training and support to the dealers’ service personnel. This includes our team of “flying doctors,” Ferrari engineers who regularly travel to service centers to address difficult technical issues for our clients.
We also sell certain cars together with a scheduled program of recommended maintenance services in order to ensure that these cars are maintained to the highest standards to meet our strict requirements for performance and safety.
While we do not have any direct involvement in pre-owned car sales, we seek to support a healthy secondary market in order to promote the value of our brand, benefit our clients and facilitate sales of new cars. Our dealers provide an inspection service for clients seeking to sell their car which involves detailed checks on the car and a certification on which the client can rely, covering, among other things, the authenticity of the car, the conformity to original technical specifications, and the state of repair. Furthermore, we offer owners of classic Ferrari cars maintenance and restoration services.
Client Relations
Our clients are the backbone of our business together with our brand and our technology. We do not promote our brand or our cars through general advertising. Our main brand marketing and promotional activities have two principal targets.
Firstly, we target the general public. Our most significant effort in this respect is centered on our racing activities and the resonance of Scuderia Ferrari (see “—Formula 1 Activities”). We also engage in other brand-promotional activities, including participation in motor shows and other public events.
Secondly, we target existing and prospective clients, seeking to promote clients’ knowledge of our products, and their enjoyment of our cars both on road and on track, and to foster long term relationships with our clients, which is key to our success. In 2015, approximately 59.5 percent of our new cars were sold to Ferrari owners.
By purchasing our cars, clients become part of a select community sharing a primary association with the Ferrari image and we foster this sense of fellowship with a number of initiatives. We strive to maximize the experience of our clients throughout their period of interaction with Ferrari — from first contact, through purchasing decision process, to waiting-time management and ownership.
Client events
We organize a number of client events at Maranello and elsewhere.
Our factory in Maranello is the core of our client engagement strategy and a symbolic hub attracting clients and prospects worldwide. Upon invitation, clients and prospects can visit the factory, witness some of its workings and experience several Ferrari core values such as heritage, exclusivity and customization. At the factory, clients have the opportunity to configure their cars through our personalization and bespoke program (see “—Personalization Program and Tailor Made Program”).
Clients are also invited to celebrations and other events that we organize in various markets. Some recent examples include the celebrations of the “Year of the Horse” in China and the Finali Mondiali in Mugello, Italy, which attracted over 50,000 fans during the racing days.

36


Every new model launch is carefully staged and selected clients and prospects have preferential access to the new car. The new model presentation begins with the release of images providing a preliminary, often partial view of its design. Clients are then invited to a preview or world premiere. A public model presentation generally follows at motor shows where clients are provided access to the Ferrari stand. Further country and regional events follow before delivery of the first cars to dealers.
Driving events
Driving events serve the dual objective of allowing clients to experience at their best the emotion of driving a Ferrari car, and to foster client loyalty and repeat purchases by creating superior car-usage occasions. Track and sporty driving activities are mainly targeted to clients with a preference for sports models.
In addition to several track day activities, organized by local sales departments and dealers to allow clients to use their cars on ad-hoc rented tracks, Ferrari has a central department responsible for professionally organizing races and racing courses, Corse Clienti. The Corse Clienti activities take place on some of the world’s most famous race tracks, and include both competitive races, such as the Ferrari Challenge Championships, and non-competitive events, such as with XX and F1 Programme. The XX and F1 Programme is a highly selective initiative dedicated to a restricted group of clients who own non-homologated GT race cars and F1 cars previously used in the Formula 1 Championship. Ferrari Challenge and XX/Formula 1 events are sometimes accompanied by so-called Ferrari Racing Days. These events are open to non-competing clients and prospects and a wider audience, and they offer the opportunity for important client gatherings.
In addition to on-track racing, we organize various on-the-road driving events, including both proprietary formats (Ferrari Cavalcade) or with a branded presence within an established driving event. For example, in the Ferrari Tribute to Mille Miglia and the Ferrari Tribute to Targa Florio modern Ferrari cars participate in their own regularity rally taking place shortly before the start of the classic Mille Miglia and Targa Florio races.
We see nurturing our clients’ passion for driving as a key asset for our future commercial success, particularly in markets where racing traditions are less pronounced. We offer to our prospective and existing clients interested in new Ferrari models our Esperienza Ferrari initiative, which consists of driving sessions designed to allow participants to experience the pleasure of driving a Ferrari with a team of highly qualified and skilled Ferrari instructors and technicians professionally trained in high-performance driving. In addition we also offer on-track driving courses to our clients, catering to different levels of skill and experience and teaching essential driving skills for high performance cars. In our newer markets, such as China, we also offer complimentary driving courses on track to any new car buyer.
Ferrari Classiche
Through our “Ferrari Classiche” service, we offer specialized maintenance and restoration services to owners of Ferraris older than 20 years. We use either original components and spare parts or replicas based on the original specifications and our restoration service offers our clients the opportunity to reinstate any classic Ferrari to its pristine, original conditions. Each year Ferrari Classiche carries out maintenance works on approximately 40 cars and performs approximately 10 full restorations.
Ferrari Classiche also issues certificates of authenticity to Ferrari models older than 20 years and to all Ferrari racing cars, including Formula 1 single-seaters of any age, to attest the authenticity of the cars and of their components. Each certified car undergoes a thorough technical inspection, at the Ferrari Classiche workshop in Maranello or at certain of our authorized dealers worldwide, to verify that the car’s chassis, engine, gearbox, transmission, suspension, brakes, wheels, bodywork and interior are original, or otherwise comply with, the car’s original specifications. If the inspection is successful, our committee of experts, chaired by Piero Ferrari, our Vice Chairman, grants the certification. In recent years Ferrari Classiche has on average granted approximately 400 certificates of authenticity per year.
Formula 1 Activities
Our participation in the Formula 1 world championship with Scuderia Ferrari is the core element of our marketing effort and an important source of technological innovation for the engineering, development and production of our Sports and GT cars. The Formula 1 world championship is the highest class for single-seat auto races, attracting the best drivers, engineers and designers. Importantly, with over 420 million television viewers in 2015 (Source: Repucom, 2015), it is the most watched annual sport series in the world.
Formula 1 cars rely on advanced technology, powerful engines and cutting edge aerodynamics, making them the most advanced racing vehicles in motorsports. Single seater Formula 1 racing cars can reach speeds of up to 360 km/h (220 mph). While Europe is the sport’s traditional base, Formula 1’s reach has expanded significantly and an increasing number of

37


Grand Prix are held in non-European countries, such as China, Bahrain, United Arab Emirates, Singapore, Australia, Brazil, Canada, Japan, Mexico and the United States. This provides participants in the world championship exceptional visibility on the world stage, as also evidenced by the growing volume of dedicated media to the events, including websites, blogs, magazines and other publications.
 
Our Scuderia Ferrari has participated in the Formula 1 world championship since its beginning in 1950, and won our first Grand Prix in 1951. Since our debut, we have participated continuously in the world championship and we are the oldest and most successful team in the history of Formula 1, with 224 Grand Prix won. On August 23, 2015, at the Spa-Francorchamps circuit in Belgium, we competed in our 900th Grand Prix race. In the 64 years of our racing history, we have won 15 drivers championships and 16 constructors championships, more than any other team. Many of the best known drivers in the sport’s history have raced in Scuderia Ferrari’s distinctive red single-seaters including Alberto Ascari, Juan-Manuel Fangio, Niki Lauda, Gilles Villeneuve, Alain Prost and Michael Schumacher. Our main drivers for the 2015 Formula 1 world championship are Sebastian Vettel, currently in his second season with Scuderia Ferrari and winner of four of the most recent six drivers’ championship titles, and Kimi Raikkonen, who won our most recent drivers’ championship in 2007. The two drivers have won a combined 62 Grand Prix races.
Our Formula 1 racing performance has been less successful over the past several years as our most recent driver's championship and constructors' championship were in 2007 and 2008, respectively. To address this, we have recently enhanced our focus on Formula 1 activities with the goal of improving racing results and restoring our historical position as the premier racing team in Formula 1. In addition to increasing our research and development activity to improve car performance, these efforts have included adding to the racing team in 2015 Sebastian Vettel, one of the most successful drivers in recent years, and Maurizio Arrivabene as team principal.
Participation in the world championship is regulated by bilateral Team Agreements entered into between Formula One World Championship Limited (FOWC), the Formula 1’s commercial rights holder, and each competing Formula 1 racing team (including Ferrari) and by regulations issued by the Federation Internationale de l’Automobile (FIA), the motor sport’s governing body. The Team Agreements cover the 2013-2020 racing seasons and govern the terms by which the racing teams take their share of commercial profits. The FIA regulations, regulate how the cars are manufactured and the teams compete in races and include technical regulations governing aspects ranging from tyres, weight, to ignition, fueling and throttle requirements, and sporting regulations covering scoring and racing procedures. In return for their participation in Formula 1 races the teams receive a share of a prize fund based on the profits earned from Formula 1 related commercial activities managed by FOWC, including in particular television broadcasting royalties and other sources, such as racetrack owners’ fees. Shares in a prize fund equal to approximately 60 percent of earnings before interest, tax, depreciation and amortization from commercial activities and broadcasting rights are paid to the teams, largely based on the relative ranking of each team in the championship. We use our share of these payments to defray part of the costs associated with Scuderia Ferrari, including the costs of designing and producing a set of single-seaters each year and the costs associated with managing a racing team including earnings of drivers, who generally are among the most highly paid athletes in the world.
Improvements in technology and, sometimes, changes in regulation, require the design and production of a new racing car every year. Therefore, we begin designing our single-seaters each year in April in anticipation of the start of the racing season the following March. While the chassis we build each year are designed to be used throughout the racing season, the majority of other components mounted on our cars are adjusted from race to race depending on the characteristics of the circuits.
To maximize the performance, efficiency and safety of our single-seaters, while complying with the strict technical rules and restrictions set out by the FIA, our research and development team plays a key role in the development of our engines and cars. We often transfer technologies initially developed for racing to our road cars. Examples include traction control systems, gear shifting steering wheels, and the use and development of carbon fiber, which makes cars lighter and faster. Our road cars (especially our sports car models) have benefited from the know-how acquired in the wind tunnel by our racing car development teams, enjoying greater stability as they reach high speeds on and off the track. Our research and development team focused on combining minimal lap times with maximum efficiency, leading to advances in kinetic energy recovery system, or KERS, technology. KERS recovers a moving vehicle’s kinetic energy while braking, storing it in a reservoir. Building on our racing team’s expertise, we developed a hybrid KERS system, for our LaFerrari road car.
The high brand visibility we achieve through success in the world championship has historically enabled us to benefit from significant sponsorships. Philip Morris International has been Scuderia Ferrari’s official sponsor for over forty years and, together with Shell (our official sponsor since 1996) and Banco Santander (our official sponsor since 2008) remain our principal official sponsors. Other official sponsors include TNT (Energy Drink), Alfa Romeo, UPS, Kaspersky lab, Weichai, Hublot and Claro. Our official suppliers include, among others, Pirelli, Puma, Oakley, IVECO, Mahle, NGK, Magneti Marelli and OMR. Visibility and placement of a sponsor’s logo reflects the level of sponsorship fees. Historically, our sponsors have sought

38


advertising opportunities on the chassis of our cars, on clothes worn by our team members and drivers, and in the right to mention Ferrari in their marketing materials.
We utilize the platform provided by Formula 1 for a number of associated marketing initiatives, such as the hosting of clients and other key partners in the Scuderia Ferrari paddock to watch Grand Prix races, and our Formula 1 drivers participation in various promotional activities for our road cars. We often sell older single-seaters to clients for use in amateur racing.
More generally, Formula 1 Racing allows us to promote and market our brand and technology to a global audience without resorting to traditional advertising activities, therefore preserving the aura of exclusivity around our brand and limiting the marketing costs that we, as a company operating in the luxury space, would otherwise incur.
The Mugello Circuit
We acquired the international Mugello circuit in Scarperia, near Florence, in 1988. We have renovated its buildings, 5.2 km race track and other testing and racing facilities, making Mugello, we believe, one of the world’s finest circuits of its type, with FIA Grade 1 and FIM Grade A certifications, the highest level of homologation for a track- race.
We perform promotional activities in order to rent the Mugello circuit to event organizers who regularly host leading car and motorbike races at the circuit, including the MotoGP World Championship since 1992. Many Formula 1 constructors have also used our Mugello circuit for their development tests.
In 2011, the Mugello circuit won its fifth “Best Grand Prix” award, the highest honor given by the motor sport world for MotoGP organizers. The Mugello circuit is the only track race to have received this award five times.
Brand Activities
Ferrari is one of the world’s leading luxury brands. We engage in brand development and protection activities through licensing contracts with selected partners, retail activities through a chain of franchised or directly managed Ferrari stores, licensed theme park and the development of a line of products sold exclusively in our Ferrari stores and on our website www.store.ferrari.com.
Licensing and Theme Park
We enter into license agreements with a number of licensees for the design, development and production of Ferrari branded products.
We carefully select our licensees through a rigorous process and we contractually seek to ensure that our brand and intellectual property are protected and that the products which will eventually bear our brand are of adequate quality, appearance and market positioning.

39


The table below sets forth our current licensing mix.
Category
 
Principal Licensees
Accessories
 
o Oakley (sunglasses)
o Tod’s (shoes and leather goods)
Consumer electronics
 
o Various
Sportswear
 
o Puma
Theme Parks
 
o Ferrari World, Abu Dhabi
o Ferrariland, Port Aventura
Toys
 
o Bburago (play-set)
o Lego (Lego toys)
Video games
 
o Electronic Arts
o Microsoft
o Sony Polyphony
o Ubisoft
Watches
 
o Hublot (co-branded high-luxury watches)
o Movado (Scuderia Ferrari Watches)
Other (including collectors' models, kid apparels, and accessories, stationary and credit cards)
 
o Various
A significant portion of our revenues from licensing activities consists of royalties we receive in connection with Ferrari World, our theme park in Abu Dhabi (11 percent of royalties generated by licensing activities). Ferrari World opened on Yas Island —on the North East side of Abu Dhabi’s mainland in 2010 and it is currently the only operating Ferrari theme park. Ferrari World’s iconic sleek red roof is directly inspired by the classic double curve side profile of the Ferrari GT body, spanning 200,000 square meters and carrying the largest Ferrari logo ever created. Ferrari World Abu Dhabi offers an all-around Ferrari experience to children and adults alike. The attractions include futuristic 4D rides such as the child-friendly Speed of Magic and the world’s fastest roller-coaster which reaches speeds of 240 km/h and simulates the breathtaking adrenaline rush of a Ferrari single-seater. In the G-Force experience, visitors are launched 62 meters upwards and over the roof of the Park before being pulled back to earth.
In 2014 we reached an agreement with PortAventura Entertainment S.A.U. to open Ferrari’s first European theme park at the PortAventura resort near Barcelona in Spain. PortAventura Entertainment S.A.U. has announced a planned investment of €100 million and the park is expected to open in 2017. In the long-term we aim to open one theme park in each of the main geographic areas where we operate, including North America and Asia.
Retail and E-Commerce
Through our network of Ferrari stores (franchised or directly managed), we offer a wide range of Ferrari branded products, including a line of products exclusively sold in our Ferrari stores and on our website. All Ferrari branded product we sell in our stores and on our website are either manufactured by our licensees, or directly sourced from our selected network of suppliers.
At December 31, 2015, there were a total of 37 retail Ferrari stores, including those in Maranello, Milan, Macau, New York, Las Vegas, Miami and Los Angeles (United States), Johannesburg (South Africa), Dubai and Abu Dhabi (UAE), including 25 franchised stores and 12 stores owned and operated by us.
We require all franchisees to operate Ferrari stores according to our standards. Stores are designed, decorated, furnished and stocked according to our directions and specifications.
We use multiple criteria to select our franchisees, including know-how, financial condition, sales network and market access. Generally, we require that applicants meet certain minimum working capital requirements and have the requisite business facilities and resources. We typically enter into a standard franchising agreement with our franchisees. Pursuant to this agreement, the franchisee is authorized to sell our products exclusively at a suggested retail price. In exchange, we provide them with our products, the benefit of our marketing platform and association with our corporate identity.

40


In recent years, our website has proved to be an increasingly valuable sales channel, with over 400.000 registered users in more than 190 countries and translations in seven languages.
Design, Development and Manufacturing
Design
The design of our cars is an essential and distinctive component of our products and our brand. Our designers, modelers and engineers work together to create car bodies that incorporate the most innovative aerodynamic solutions in the sleek and powerful lines typical of our cars. The interiors of our cars seek to balance functionality, aesthetics and comfort. Our cockpits are designed to maximize the driving experience, more sporty or more comfortable, depending on the model through an ergonomic layout of all main controls clustered on the steering wheel, and our cars’ interiors boast elegant and sophisticated trims and details. A guiding principle of our design is that each new model represents a clear departure from prior models and introduces new and distinctive aesthetic elements, delivering constant innovation within the furrow of tradition.
For the design of our cars we have relied historically on our highly successful collaboration with the Italian car design firm Pininfarina. During over 60 years of collaboration with Pininfarina, our cars have been granted several renowned design awards, including: 458 Italia (Best in Show assigned by Autoweek magazine, 2009, Car of the Year and Supercar of the Year assigned by BBC Top Gear Magazine, 2009 and “Chi È” Cars of the Year 2010), California (Best Buy and Recommended Awards 2009 assigned by Chinese magazine Auto World Magazine and Oriental Award for Best Design, 2009), Enzo (“Best in Show” 2002-Paris Motor Show 2002).

In 2010 we established the Ferrari Design Centre, our in-house design department, in order to improve our control over the design process and ensure long-term continuity of the Ferrari style. Its mission is to define and evolve the stylistic direction of the marque, imprinting all new products with a modern stamp, according to a futuristic, uncompromised vision. All concepts and works from Ferrari Design Centre are marked with our logo “Ferrari Design” (see “—Intellectual Property”). Ferrari Design Centre handles all aspects of automotive styling for the Ferrari road cars product range, including the styling of all external bodywork and components, series production models for the GT and Sports car models, special editions, limited editions, one-off models and concept cars. Ferrari Design also includes a colour & trim team which handles the choice of materials and finishes for both exterior and interior trim and, in addition, is responsible for the Tailor Made program in conjunction with the product marketing department. Ferrari Design is also regularly involved with the styling and conceptual definition of Ferrari branded products produced by our licensees (see “—Brand Activities”).

The department is organized as an integrated automotive design studio, employing a total workforce of approximately 70 people (both full-time workers and external contractors) including designers, 3D surfacing operators, physical modelers and graphic artists. It operates a modeling studio fully equipped with 5-axis milling machines with the capacity to develop various full-scale models (interior and exterior) in parallel.

41


Ferrari Design Centre entirely designed our most recent cars, such as the GTC4Lusso, F12tdf, the 488 Spider, the 488 GTB, the LaFerrari and the FXX K, while it designed other current range models, such as the F12berlinetta, in collaboration with Pininfarina. Although our collaboration with Pininfarina is still active with regard to certain special models and fuoriserie, we expect that the design and development of most of our future models will be carried out primarily by our Ferrari Design Centre.
During the 5 years of activity of the Ferrari Design Centre, our cars have been granted several renowned design awards. Among the recent ones are the following:
•
FXX K: Red Dot: “Best of the Best” award for top design quality and ground-breaking design (2015).
•
F12berlinetta: “Compasso d’Oro 2014” (ADI); “Car of the Year 2014” (Robb Report); “Supercar of the Year 2013” (GQ); “Best Coupé 2013” (L’Automobile Magazine); “Design Award, 2012” (Auto Bild); “Goldenes Lenkrad 2012” (Auto Bild); “Supercar of the Year 2012” (Top Gear).
•
LaFerrari: Red Dot design award for high design quality (2015); “Design Award” (AutoScout24 -11th Internet Auto Awards); “Design of the Year 2014” (AutoDesign & Styling Awards); “Best Super Sportscar 2014” (Auto Zeitung); “2014 James May’s Car of the Year” (Top Gear); “Best Cars 2015 —Coupé Category” (Motor Presse Iberia).
•
California T: Red Dot design award for high design quality (2015); “The Most Beautiful Automobile Award 2014” (Car & Driver China); “Most Stylish Car 2014” (Schweizer Illustrierte).
•
458 Speciale: “Supercar of the Year 2013” (Top Gear —UK); “2014 Car of the Year” (Evo —UK); “James May’s Car of the Year 2013” (Top Gear —UK); “Supercar of the Year 2013” (Evo Middle East); “2014 Britain’s Best Driver’s Car” (Autocar —UK).
•
458 Speciale A: “Convertible of the Year 2014” (Top Gear UK).
Product Development
Our product development process is highly structured with the aim of allowing us to respond quickly to market demand and technological breakthroughs and to maintain our position at the top end of the market for car performance and luxury. Our technology team is comprised of approximately 590 engineers and technicians at December 31, 2015. All of our cars are designed and engineered in Italy, at our factories in Maranello and Modena (Carrozzeria Scaglietti).
Our product development includes innovation programs, components programs and car programs, with regular management reviews and detailed cycle milestones. Our components programs are intended to ensure technological innovation and support the development of future models rather than to create an “off the shelf” catalog of available components.
All our cars are designed and manufactured based on two highly modular architectures incorporating front and mid-rear engines respectively. This allows for flexible manufacturing at low volumes and easy adaptation to different models with limited additional investment. Our architectures utilize a number of common structures, reducing tooling investment for new model production. When developing a new platform, we focus on innovation, leveraging on our collaboration with the select research centers and universities, and flexibility, allowing us to respond efficiently to potentially varied market demand. The flexibility of our platforms enables us to introduce our highly innovative contents on a wide range of models while, at the same time, reducing the fixed costs connected to the use of multiple platforms.
Consistent with our mission to develop cutting edge sports and GT cars, our product development efforts continually focus on improving core components, such as the powertrain, car dynamics, and the use of materials such as special aluminum alloys and carbon fiber (see “—Design, Development and Manufacturing—Production Process”).
The expertise we acquired in these fields has recently guided our efforts to combine improved performance with reductions in CO2 emissions. In recent years, calls for CO2 emissions reductions have come from regulatory initiatives as well as market demand. LaFerrari is an example of such efforts, and we believe it shows our ability to apply our core mechanical know-how to new and expanding fields such as hybrid technology.
The design and development process for a new model currently takes approximately 40 months, depending on the modifications (approximately 33 months for M models), measured from the beginning of the development project to the start

42


of production. We believe this fast development is made possible by our dedicated and concentrated development team as well as by the clarity and focus of the product marketing objectives. Our product marketing team is integrally involved in the entire development process, beginning with the initial product brief and, thereafter, through systematic interaction.
The cadence of production launches is designed to maintain our product portfolio’s leading position in the industry segment and optimize the length of the model lifecycle relative to demand, while limiting research and development spend to maximize its productivity.
Generally, we plan for a four to five year life cycle for our range models. After four to five years, we typically launch a “modified” or “M” model based on the same platform but featuring significant aesthetic updates and technological improvements. This is, for example, the case of the California T, launched in 2014, which replaced and updated the earlier California, featuring new sheet-metal, new interior, a revised chassis and a new turbocharged powertrain. Typically, four years after the launch of the M-model, we start production of an entirely new model based on an completely new or overhauled platform. Therefore, the cumulative life cycle of each of our models is approximately eight to nine years, and typically we have launched one new model every year while keeping four or more range models in production at any time. The actual life cycles of our models vary depending on various factors including market response. Special series have different, typically shorter, lifecycles. We usually utilize additional platforms for production of our supercars, such as LaFerrari.
We also run specific programs for our most critical components, independently from the development of new car models. This is the case of our engines, which we manufacture according to cycle milestones not necessarily connected with the release of a new car model. Since 2011, we have also been producing the new F160 3.0-litre V6 Turbo engine exclusively for Maserati. In 2015, we produced approximately 21,500 F160 engines for Maserati. (See “—Manufacturing of Engines for Maserati”). Many of our components, such as those relating to transmission, power steering, navigation systems and the instrument cluster, are co-designed by us and our suppliers based on our specifications.
Our research and development operations constantly focus on innovating our cars’ concept and package, on powertrains design, car architecture and components development. (See “—Research and Development”).
Procurement
We source a variety of components (including transmissions, brakes, driving-safety systems, navigation systems, mechanical, electrical and electronic, plastic components as well as castings and tires), raw materials (aluminum, and precious metals including palladium and rhodium), supplies, utilities, logistics and other services from numerous suppliers.
Our focus on excellence, in terms of luxury and performance, require us to select suppliers and partners that are able to meet our high standards. For the sourcing of certain key components with highly technological specifications, we have developed strongly synergic relationships with some of our suppliers, which we consider “key strategic innovation partners.” We currently rely on 14 key strategic innovation partners, including GETRAG and Brembo for the supply of transmissions and brakes respectively. We have also developed strong relationships with other industrial partners for bodyworks and chassis manufacturing and for powertrain and transmissions, among other things. Pursuant to our make-or-buy strategy, we generally retain production in-house whenever we have an interest in preserving or developing technological know-how or when we believe that outsourcing would impair the efficiency and flexibility of our production process. Therefore, we continue to invest in the skills and processes required for low-volume production of components that we believe improve product quality.
For the year ended December 31, 2015, the purchases from our five largest suppliers by value accounted for approximately 25 percent of total procurement costs, and no supplier accounted for more than ten percent of our total procurement costs.

We recognize the contribution of our suppliers to our success through various initiatives, including Podio Ferrari and Key Innovation Partners, events devoted to Ferrari’s suppliers who displayed particular excellence or innovative flair.

Production Process
Our production facilities are located in Maranello and in Modena, Italy (see “Item 4.D. Properties, Plant, and Equipment”). Our production processes include supply chain management, production and distribution logistics.
Notwithstanding the low volumes of cars produced, our production process requires a great variety of inputs —over 40,000 product identifier codes sourced from approximately 1,000 total suppliers —entailing a complex supply chain

43


management to ensure continuity of production. Our stock of supplies is warehoused in Ubersetto, near Maranello, and its management is outsourced to the logistics company Kuehne & Nagel.
Most of the manufacturing process takes place in Maranello, including aluminum alloy casting in our foundry, engine construction, mechanical machining, painting, car assembly, and bench testing; at our second plant in Modena (Carrozzeria Scaglietti) we manufacture our cars’ aluminum bodyworks and chassis. All parts and components not produced in house at Ferrari are sourced from our panel of suppliers (see “—Procurement”).
In recent years we have made significant investments in our manufacturing facilities, and between 2002 and 2012 the plants housing our production processes were entirely renovated or rebuilt. We plan our investment activities based on an estimated plant useful life of approximately 20 years. Equipment, on the other hand, may require substantial investment with the introduction of new models, particularly in the case of shell tools for the foundry, tools for machining, feature tools for body welding and special mounting equipment for the assembly.
At December 31, 2015, our production processes employed over 1,250 engineers, technicians and other personnel (approximately 1,150 engineering and production employees and approximately 100 white collar employees). Furthermore, in 2015 we employed additional 232 temporary engineers and production employees. We have a flexible production organization, which allows us to adjust production capacity to accommodate our expected production requirements. This is primarily due to the low volume of cars we produce per year and to our highly skilled and flexible employee base that can be deployed across various production areas. In addition, we can adjust our make-or-buy strategies to address fluctuations in the level of demand on our internal production resources. Our facilities can accommodate a meaningful increase in production compared to current output with the increase of weekend shifts or, to address special peaks in demand, temporary employees. Production could be increased even further with the introduction of a second shift on car assembly lines compared to the single shift currently operated. We constantly work to increase the utilization rate and reduce the internal scrap rate and we closely monitor an index of our production efficiency. In the past few years we have reduced our cycle time by approximately three percent per year. We are also committed to improve the reliability of our cars, reduce their defects, and optimize their finishing.
Unlike most low volume car producers, we operate our own foundry and machining department producing several of the main components of our engines, such as engine blocks, cylinders heads and crankshafts. We believe this accelerates product development and results in components that meet our specifications more closely.
Engine Production
Our engines are produced according to a vertical structure, from the casting of aluminum in our foundry up to the final assembly and testing of the engine. Several of the main components of our engines, such as blocks and cylinders heads are produced at our foundry in Maranello. For this purpose, we use a special aluminum alloy that includes seven percent silicon and a trace of iron, which improves mechanical integrity, and our own shell and sand casting molds. Once all components are ready, engines are assembled, on different lines for our V8 engines, V12 engines and for the V6 engines we manufacture for Maserati. The assembly process is a combination of automatic and manual operations. Since start of the assembly process, each engine is identified with a barcode and operations are recorded electronically. Every engine then goes to the test benches where its power and torque output are measured to ensure it delivers the expected performance. In 2015 we produced an average of approximately 147 engines per day, including approximately seven V12, 43 V8 (including two V8 turbo and 13 V8 aspirated for Maserati) and 97 V6 engines for Maserati (see “—Manufacturing of Engines for Maserati”).
Chassis and Body Assembly
In parallel with the assembly of our engines, we prepare our body-shells and chassis at our panel shop Carrozzeria Scaglietti in Modena. The main components of body-shells and chassis are not manufactured internally but are sourced from manufacturers such as Officine Meccaniche Rezzatesi for chassis and Fontana Group for bodies. At Carrozzeria Scaglietti we have two different production lines dedicated to the assembly of our V8 and V12 cars. We carefully check the alignment of the various parts —most importantly the engine cover and the wings —with electronic templates and gauges. Our highly trained specialists also perform surface controls to the aluminum panels and work any imperfections on it by either filing or panel beating.
Painting
Our paint shop was inaugurated in 2004 with what we believe to be state-of-the-art technology. When transferred to our paint shop, all body-shells are cleaned with automatic pressure blowers (to avoid the electrostatic effect) and carefully brushed with emu feathers (because of their natural anti-electrostatic properties) to clean off any dirt particles or impurities. The

44


bodies are then mounted on a loading bay, immersed in the cataphoresis tanks and subsequently transferred to a fixing gas fired oven at 140 degrees. Primers are then applied and fixed at 190 degrees until the completely grey body-shell is ready for painting. Painting is automated for the larger surfaces, while it is done by hand for some other localized areas. The whole car is painted at the same time to ensure color harmony. The bodies are finally polished with lacquer to fix the paint and give the bodies their final finish.
Assembly Line and Final Checks
The final assembly of our cars takes place in our new body-shop built in 2008. Assembly of our eight and 12 cylinder cars are carried out separately. For each model, the initial assembly operations take place simultaneously on different lines and sections to maximize efficiency.
Personalization and Road Tests
The final stage of our car production is the fitting of all bespoke interiors, components and special equipment options that our clients choose as part of our personalization program (see “—Personalization Program and Tailor Made Program”). After the personalization phase, every car completes a 40-kilometer road test-drive.
Finishing and Cleaning
After the road test all cars go to the finishing department. There, we thoroughly clean interior and exterior, check the whole car, polish and finish the bodies to give them their final appearance.
Manufacturing of Engines for Maserati
We have been producing engines for Maserati since 2003. The V8 engines that we historically produced and continue to produce for Maserati are variants of Ferrari families of engines and are mounted on Maserati’s highest performing models, such as the Quattroporte (turbo engines), the Granturismo and the Grancabrio (aspirated engines). All of the V8 engines that we sell to Maserati are manufactured and assembled according to the same production processes we adopt for the V8s equipped on our cars (see “—Production Process”). In 2015, we sold approximately 379 V8 turbo engines and approximately 2,921 V8 aspirated engines to Maserati. In 2011 we began producing a family of engines exclusively for Maserati, namely the F160 3.0-litre V6 Turbo engines, in much larger production volumes. Our arrangement with Maserati is currently governed by a framework agreement entered into in December 2014. Pursuant to this agreement, the initial production run consists of up to 178,000 engines in aggregate through 2020. Based on our discussions with Maserati, we expect the production run to increase to up to 260,000 engines in aggregate through 2023 to cater to Maserati’s planned expanded model range and sales. Volumes and pricing are adjusted from time to time to reflect Maserati’s changing requirements. Under the framework agreement, Maserati is required to compensate us for certain costs we may incur, such as penalties from our suppliers, if there is a shortfall in the annual volume of engines actually purchased by Maserati in that year. In 2015, we sold approximately 21,500 V6 engines to Maserati in four different versions, ranging from 330 hp to 410 hp.
In order to meet the V6 volumes and specifications requirements, we built a dedicated assembly facility at Maranello with a much higher level of industrialization compared to production of our V12 and V8 engines. Due to the larger volumes and product specifications, our make-or-buy strategy for the production of V6 F160 engines also differs from the one applicable to Ferrari engines. The vast majority of the engine components are sourced externally from our panel of suppliers (see “—Procurement”) and then assembled in Maranello on our highly automatized V6 assembly line.
From the sale of engines to Maserati, we recorded net revenues of approximately €177 million in 2015.
Financial Services
We offer retail client financing for the purchase of our cars through Ferrari Financial Services S.p.A. (“FFS”). FFS, together with its subsidiaries, operates in our major markets, including UK, Germany and the United States. We also offer dealer financing through FFS in the United States. Until December 2014 we offered dealer financing in UK, Germany, Belgium and Switzerland and until May 2015 in Japan.
Through FFS, we offer a range of flexible, bespoke financial and ancillary services to clients (both new and recurrent) interested in purchasing a wide range of cars, from our current product range of Sports and GT Cars, to older pre-owned models, to classic models, special series and competition cars, including retired Formula 1 single-seaters. FFS also provides special financing arrangements to a selected group of our most valuable and loyal customers.

45


In December 2014, we entered into a partnership with FGA Capital S.p.A. (now FCA Bank S.p.A. or FCAB), a 50/50 joint venture between FCA Italy S.p.A. and Crédit Agricole Consumer Finance S.A. FCAB operates in 16 European countries and we believe that our partnership with FCAB will enable us to extend the reach of our dealer and retail financing services to a larger number of markets in which we operate. Our relationship with FCAB is not expected to change following the Separation.
In May 2015, we entered into a partnership with JACCS Co., Ltd to promote sales volume growth in the Japanese market with a full scale customer and dealer finance arrangement.
In light of our recent partnership with FCAB and JACCS Co., Ltd, and also due to recent changes to the banking and financial laws in Italy, we requested and obtained the cancellation of FFS from the list of regulated financial intermediaries. We are working on expanding our partnerships in additional markets.

At December 31, 2015, FFS’s portfolio of financial receivables was €1,171 million in aggregate, including €668 million in the Americas (57 percent of total) and €503 million in EMEA (43 percent of total).

Research and Development
We engage in research and development activities aimed at improving the design, performance, safety, efficiency and reliability of our cars.
Our research and development center is in Maranello and, at December 31, 2015, included approximately 320 employees who are part of our broader technology team. Our personnel support product development efforts and have expertise in a number of disciplines, including mechanical, electrical, materials, computer science and chemical engineering.

We capitalized development costs of €154 million in 2015, €145 million in 2014, and €93 million in 2013.
Research and development costs expensed during each period mainly include the research and development incurred for the Formula 1 racing activities to support the development of the sports and GT car models and prototypes, which are expensed as incurred. The following table summarizes our research and development expenditures in the years ended December 31, 2015, 2014 and 2013:
 
For the years ended December 31,
 
2015
 
2014
 
2013
 
(€ thousand)
Amortization of capitalized development costs
114,856

 
125,497

 
120,444

Research and development costs expensed during the period
446,726

 
415,336

 
358,850

Total research and development costs
561,582

 
540,833

 
479,294

    
We transfer technologies developed by our racing team to our Sports and GT models across all core vehicle development areas, such as aerodynamics, powertrain, and car dynamics. To that end, we also transfer research and development personnel between the Formula 1 team and the sports and GT cars team, and the two teams regularly join forces for ad-hoc projects in areas such as combustion engine, new materials or computational fluid dynamics for aerodynamic performance.

Vehicle Concept
Achieving the most efficient combination of lightweight materials and optimal weight distribution gives our cars their superior longitudinal and lateral driving dynamics. We employ a range of technologies to reduce car weight. For our range models we are currently developing an aluminum lightweight chassis and body, which is lighter than a carbon fiber chassis. For LaFerrari we are currently using state of the art carbon fiber technologies, which we developed in conjunction with our Formula 1 research and development team. We are currently developing a new architecture, aimed at further reducing car weight and increasing performance, and thus improving stiffness and reducing noise, vibration and harshness (NVH), among other things.

46


Powertrain
The powertrain is a core area of our research and development. As with other research and development areas, powertrain research benefits from a constant exchange between the Formula 1 team and designers of our Sports and GT cars.
Engines

Our V12 engines’ output ranges from 660 hp (in the FF), to 780 hp (in the F12tdf), and up to 800 hp (in the LaFerrari). This range highlights our versatility in developing V12 aspirated engines, as there are no other carmakers which currently boast such specific high power ratios. With the new California T and the 488 GTB, we transitioned from aspirated V8 engines to turbo charged engines. This allowed us to increase specific engine power more than 20 percent, while reducing emissions by up to eight percent. All Ferrari turbo engines are designed to have the same throttle response delivered by a naturally aspirated car. To achieve this goal we are investing in cutting edge turbo charging technologies (such as aluminum-titanium-alloys and ball bearings), with our strategic partner IHI.
To further improve efficiency with respect to emissions and performance we continuously improve on our engines, researching new materials with higher specifications for friction, thermal and mechanical stress. We are also investing in technologies that improve the combustion process, with research focusing on high pressure injection and tumble flaps.
Transmissions

Our 7-shift double clutch gearbox is a core element of Ferrari powertrains. The architecture of the gearbox, combined with the shifting technologies developed by Ferrari, allow for one of the fastest and most performance orientated shifts on the market. The 488 GTB demonstrates the potential of this gearbox, reaching the 4th gear limiter in full acceleration in six seconds.
Vehicle dynamics
Suspension, braking systems and tires are key elements of vehicle dynamics. Our vehicle suspensions allow for a very rigid and direct force transmission which increases the response of the car, and we combine those with magnetorheological ride dampers. We continuously collaborate with our strategic partners in our effort to increase damper dynamics.
All Ferraris are equipped with carbon ceramic brakes, renowned for superior breaking performance. With the 458 Speciale we introduced a new generation of carbon ceramic brakes with even higher breaking performance and reduced weight. We plan on equipping future vehicles with these brakes.
Aerodynamics
We are constantly seeking to improve the aerodynamics of our models, working specifically on drag resistance and downforce. The new 488 GTB has an aerodynamic efficiency of 1.67 due to its specially designed front and its rear spoiler. We also use passive and active spoiler systems. Thanks to our collaboration with the racing team, who assist with calculations and testing, we believe we are able to develop innovative solutions in shorter timeframes.

Hybrid technology
With LaFerrari we developed not only a supercar with cutting edge engine performance and driving dynamics, but also a highly sophisticated hybrid car. In conjunction with our partner Magneti Marelli, we developed a compact electric power unit (120KW) and DC/DC charger. The battery (120KW/2,3KWH) was developed in conjunction with our Formula 1 team, who has extensive know-how in high performance powertrains.
The LaFerrari project greatly expanded our knowledge of powertrain electrification (and its implications on performance and efficiency). We actively work to improve performance and efficiency of electric powertrains and to extend the range of electric components in our cars (e.g. electric power steering).
Intellectual Property
We own a number of design and utility patents and registered designs. We expect the number to grow as we continue to pursue technological innovations and to develop our design and brand activities.

47


We file patent applications in Europe, and around the world (including in the United States) to protect technology and improvements considered important to our business. No single patent is material to our business as a whole.
We also own a number of registered trademarks, designs and patents, including approximately 430 trademarks (word or figurative), registered in several countries and across a number classes. In particular, we ensure that the maximum level of protection is given to the following iconic trademarks, for which we filed a total of 4,789 registrations in 129 countries, in most of the main classes for goods and services:
•“Ferrari” (word)
•“Ferrari” logotype:
    
•the “Prancing Horse” (figurative):
•the trademark (figurative):
    
•the racing shield (figurative):
    

48


•
Scuderia Ferrari (word and figurative):
Our Sports and GT car models and Formula 1 single-seater models are also registered as trademarks (and logotypes) and we also register their designs and domain names.
The protection of intellectual property is also increasingly important in connection with our design and brand activities. Therefore, we adopt and follow internal processes and procedures to ensure both that all necessary protection is given to our intellectual property rights and that no third party rights are infringed by us. In addition, we are particularly active in seeking to limit any counterfeiting activities regarding our Ferrari branded products around the world. To reach this goal we closely monitor trademark applications and domain names worldwide, actively interact with national and local authorities and customs and avail ourselves of a network of experienced outside counsels.

Regulatory Matters
We manufacture and sell our cars around the world and our operations are therefore subject to a variety of laws and regulations relating to environmental, health and safety and other matters. These laws regulate our cars, including their emissions, fuel consumption and safety, as well as our manufacturing facilities and operations, setting strict requirements on emissions, treatment and disposal of waste, water and hazardous materials and prohibitions on environmental contamination. Our vehicles, together with the engines that power them, must comply with extensive regional, national and local laws and regulations, and industry self-regulations (including those that regulate vehicle safety). However, we currently benefit from certain regulatory exemptions, because we qualify as a SVM or similar designation in most of the jurisdictions where we sell cars (including the United States). As outlined below, these exemptions provide a range of benefits, from less stringent emissions caps and compliance date extensions, to exemptions from zero emission vehicle production requirements.
We are in substantial compliance with the relevant regulatory requirements affecting our facilities and products around the world. We constantly monitor such requirements and adjust our operations as necessary to remain in compliance.
Greenhouse gas/CO2/fuel economy legislation
Current European legislation limits fleet average greenhouse gas emissions for new passenger cars to 130 grams of CO2 per kilometer. This target, implemented gradually between 2012 and 2015, calls for 65 percent of the manufacturer’s newly registered cars to comply with the 130 grams limit in 2012, rising to 75 percent in 2013, 80 percent in 2014, and 100 percent from 2015 onwards.

49


Due to our SVM status we benefit from a derogation from the 130 grams per kilometer emissions requirement available to small volume and niche manufacturers. Pursuant to that derogation, we are instead required to meet yearly CO2 emissions targets, beginning in 2012, reaching a target level of 290 grams per kilometer in 2016 for our fleet of EU-registered vehicles that year. Ferrari has recently introduced two models featuring smaller engines which are expected to contribute to our efforts to meet the target.
In 2014, the European Union set new 2020 emissions targets, calling for 95 percent of a manufacturer’s full fleet of new passenger cars registered in the EU in 2020 to average 95 grams of CO2 per kilometer, rising to 100 percent of the fleet in 2021. The 2014 regulation extends the small volume and niche manufacturers derogation. Therefore, in December 2015, we submitted our proposed CO2 emissions target for the 2017-2021 period to the E.U. Commission for approval.
In the United States, both Corporate Average Fuel Economy (CAFE) standards and greenhouse gas emissions standards are imposed on manufacturers of passenger cars. Because the control of fuel economy is closely correlated with the control of GHG emissions, the United States Environmental Protection Agency (EPA) and the National Highway Traffic Safety Administration (NHTSA) have sought to harmonize fuel economy regulations with the regulation of GHG vehicle emissions (primarily CO2). These agencies have set the federal standards for passenger cars and light trucks to meet an estimated combined average fuel economy (CAFE) level that is equivalent to 35.5 miles per U.S. gallon for 2016 model year vehicles (250 grams CO2 per mile). In August 2012, these agencies extended this program to cars and light trucks for model years 2017 through 2025, targeting an estimated combined average emissions level of 163 grams per mile in 2025, which is equivalent to 54.5 miles per gallon.
However, for model years 2017-2025, the EPA allows a SVM, defined as manufacturers with less than 5,000 yearly unit sales in the United States, to petition for a less stringent standard. Based on our operational independence from FCA, the EPA has granted us SVM status. We have therefore petitioned the EPA for alternative standards for the 2017-2021 model years, which are aligned to our technical and economic capabilities. We expect to receive feedback on this proposal by mid 2016.
We intend to petition NHTSA for recognition as an independent manufacturer of less than 10,000 vehicles globally, in order to be eligible for alternate CAFE standards, as permitted under the CAFE program. If our petition qualifying for alternate CAFE standards is successful, NHTSA will determine the appropriate level of CAFE applicable to us for future model years.
In February 2010, the California Air Resources Board (CARB) enacted regulations that deem manufacturers of vehicles for model years 2012-2016 which are in compliance with the EPA greenhouse gas emissions regulations to also be in compliance with California’s greenhouse gas emission regulations. In November 2012, the CARB extended these rules to include model years 2017-2025.
While Europe and the United States lead the implementation of these emissions programs, other jurisdictions typically follow on with adoption of similar regulations within a few years thereafter. In China, for example, Stage III fuel consumption regulations target a national average fuel consumption of 6.9L/100km by 2015 and Stage IV targets a national average fuel consumption of 5.0L/100km by 2021. In response to severe air quality issues in Beijing and other major Chinese cities, the Chinese government also intends to adopt more stringent emissions standards beginning in 2016.
Exhaust and evaporative emissions requirements
In 2007, the European Union adopted the latest in a series of more-stringent standards for emissions of other air pollutants from passenger and light commercial vehicles, such as nitrogen oxides, carbon monoxide, hydrocarbons and particulates. These standards were phased in from September 2009 (Euro 5) and September 2014 (Euro 6) for passenger cars.
In April 2014, the “Tier 3” Motor Vehicle Emission and Fuel Standards issued by the EPA were finalized. With Tier 3, the EPA has established more stringent vehicle emission standards, requiring significant reductions in both tailpipe and evaporative emissions, including nitrogen oxides, volatile organic compounds, carbon monoxide and particulate matter. Beginning in 2017, the emission standards will be phased in and the requirement on fuel producers to reduce sulfur in gasoline will be effective. The new standards are intended to harmonize with California’s standards for 2015-2025 model years (so called “LEV3”) and will be implemented over the same timeframe as the U.S. federal CAFE and greenhouse gas emissions standards for cars and light trucks described above. Because of our status as an operationally independent SVM, Ferrari obtained a longer, more flexible schedule for compliance with these standards under both the EPA and California Program.
In addition, California is moving forward with other stringent emission regulations for vehicles, including the Zero Emission Vehicle regulation (ZEV). The ZEV regulation requires manufacturers to increase their sales of zero emissions vehicles

50


year on year, up to an industry average of approximately 15 percent of vehicles sold in the state by 2025. Because we currently sell fewer than 4,500 units in California, we are exempt from these requirements.
Additional stringency of evaporative emissions also requires more-advanced materials and joints solutions to eliminate fuel evaporative losses, all for much longer warranty periods (up to 150,000 miles in the United States).
To comply with current and future environmental rules related to both fuel economy and pollutant emissions, we may have to incur substantial capital expenditure and research and development expenditure to upgrade products and manufacturing facilities, which would have an impact on our cost of production and results of operation.
Vehicle safety
Vehicles sold in Europe are subject to vehicle safety regulations established by the E.U. or by individual Member States. In 2009, the E.U. established a simplified framework for vehicle safety, repealing more than 50 directives and replacing them with a single regulation aimed at incorporating relevant United Nations standards. This incorporation process began in 2012. With respect to regulations on advanced safety systems, the E.U. now requires new model cars from 2011 on to have electronic stability control systems and tire pressure monitoring systems (beginning in 2012). Also introduced were regulations on low-rolling resistance tires. From April 2009, the criteria for whole vehicle type approval were extended to cover all new road vehicles, to be phased in over five years depending on the vehicle category.
Under U.S. federal law, all vehicles sold in the United States must comply with Federal Motor Vehicle Safety Standards (FMVSS) promulgated by NHTSA. Manufacturers need to provide certification that all vehicles are in compliance with those standards. In addition, if a vehicle contains a defect that is related to motor vehicle safety or does not comply with an applicable FMVSS, the manufacturer must notify vehicle owners and provide a remedy at no cost to the consumer. Moreover, the Transportation Recall Enhancement, Accountability, and Documentation Act requires manufacturers to report certain information related to claims and lawsuits involving fatalities and injuries in the United States if alleged to be caused by their vehicles, and other information related to client complaints, warranty claims, and field reports in the United States, as well as information about fatalities and recalls outside the United States Several new or amended FMVSSs will take effect during the next few years in certain instances under phase-in schedules that require only a portion of a manufacturer’s fleet to comply in the early years of the phase-in.These include an amendment to the side impact protection requirements that added several new tests and performance requirements (FMVSS No. 214), an amendment to roof crush resistance requirements (FMVSS No. 216), and a new rule for ejection mitigation requirements (FMVSS No. 226). Because of our status as SVM, Ferrari is required to be compliant at the end of the phase-in period. Under the Transportation Recall Enhancement, Accountability, and Documentation Act (TREAD), we must log certain information, including incidents involving death or injury, with NHTSA. In 2014 we paid a $3.5 million civil penalty to NHTSA for reporting failures related to the period 2011-2014 and for failure to comply with early warning reporting requirements in connection with three fatalities. We have upgraded our procedures for compliance.
On July 14, 2015, we issued a safety recall report with the NHTSA, after being notified by Takata Corporation that certain driver’s side airbags manufactured by Takata, installed in certain model year 2015 cars, were defective. The recall impacts 814 of our model year 2015 cars sold in the United States and also relates to up to an additional 1,600 model year 2015 cars in other regions. The defect, caused by pre-assembled airbags supplied by Takata, relates to insufficient gluing of the airbag cover and a possible incorrect installation of the driver’s airbag cushion. The replacement component has been produced with improved gluing methods as well as improved airbag assembly measures. We have implemented a recall to remedy this safety defect.
In December 2015 we issued two safety calls reports with NHTSA, after learning that certain low pressure fuel lines manufactured and supplied by Dytech — Dynamic Flued Technologies S.p.A. were defective. The recall impacts 185 California T vehicles and 119 488GTB vehicles sold in the United States and 65 California T Vehicles and 199 488GTB vehicles sold in other regions. The defect was due to an improper coating treatment made by the supplier Dytech on the metallic part of the fuel pipe where it connects to the fuel pump. The replacement component has been produced with the proper coating. We have implemented a separate recall on each model to remedy this safety defect.
NHTSA recently published guidelines for driver distraction, and the associated compliance costs may be substantial. These guidelines focus, among other things, on the need to modify the design of car devices and other driver interfaces to minimize driver distraction. Compliance with these new requirements, as well as other possible future NHTSA requirements, is likely to be difficult and/or costly. We are in the process of evaluating these guidelines and determining what steps, if any, we will need to take to comply with the new requirements.


51


C. Organizational Structure
Subsidiaries
The following table sets forth a list of the subsidiaries that are directly or indirectly controlled by Ferrari.
For each company, the following information is provided: name, country of residence, nature of business, the percentage interest held by Ferrari and its subsidiaries, and the percentage interest held by non-controlling interests at December 31, 2015.
Subsidiaries at December 31, 2015:
Name
 
Country
 
Nature of business
 
Shares held by the Group
 
Shares held by NCI
Directly held interests
 
 
 
 
 
 
 
 
Ferrari S.p.A.
 
Italy
 
Manufacturing
 
100
%
 
—
%
 
 
 
 
 
 
 
 
 
Indirectly held through Ferrari S.p.A.
 
 
 
 
 
 
 
 
Ferrari North America Inc.
 
USA
 
Importer and distributor
 
100
%
 
—
%
Ferrari Japan KK
 
Japan
 
Importer and distributor
 
100
%
 
—
%
Ferrari Australasia Pty Limited
 
Australia
 
Importer and distributor
 
100
%
 
—
%
Ferrari International Cars Trading (Shanghai) Co. L.t.d.
 
China
 
Importer and distributor
 
80
%
 
20
%
Ferrari Far East Pte Limited
 
Singapore
 
Service company
 
100
%
 
—
%
Ferrari Management Consulting (Shanghai) Co. L.t.d.
 
China
 
Service company
 
100
%
 
—
%
Ferrari South West Europe S.a.r.l.
 
France
 
Service company
 
100
%
 
—
%
Ferrari Central East Europe GmbH
 
Germany
 
Service company
 
100
%
 
—
%
G.S.A. S.A.
 
Switzerland
 
Service company
 
100
%
 
—
%
Ferrari North Europe L.t.d.
 
UK
 
Service company
 
100
%
 
—
%
Mugello Circuit S.p.A.
 
Italy
 
Racetrack management
 
100
%
 
—
%
Ferrari Financial Services S.p.A.
 
Italy
 
Financial services
 
100
%
 
—
%
 
 
 
 
 
 
 
 
 
Indirectly held through other Group entities
 
 
 
 
 
 
 
 
Ferrari Financial Services A.G. (1)
 
Germany
 
Financial services
 
100
%
 
—
%
Ferrari Financial Services Inc. (1)
 
USA
 
Financial services
 
100
%
 
—
%
Ferrari Financial Services Japan KK (1)
 
Japan
 
Financial services
 
100
%
 
—
%
410, Park Display Inc. (2)
 
USA
 
Company holding real estate
 
100
%
 
—
%
______________________________
(1)
Shareholding held by Ferrari Financial Services S.p.A.
(2)
Shareholding held by Ferrari North America Inc.
D. Property, Plant and Equipment
Our principal manufacturing facility is located in Maranello (Modena), Italy. It has an aggregate covered area of approximately 630 thousand square meters. Our Maranello plant hosts our corporate offices and most of the facilities we operate for the design, development and production of our Sports and GT cars, as well as of our Formula 1 single-seaters. (See “Item 4.B. Business Overview—Design, Development and Manufacturing—Production Process”). Except for some leased technical equipment, we own all of our facilities and equipment in Maranello.
Between 2003 and 2008 most of the buildings in Maranello, including the paint shop building and the production building, were either rebuilt or renovated. In 2015 we have completed construction of the new building entirely dedicated to our Formula 1 team and racing activities, as well as the new wind tunnel 4WD.

52


Adjacent to the plant is our approximately 3,000 meter Fiorano track, built in 1972 and remodeled in 1996. The track also houses the Formula 1 logistics offices. Additional facilities in Maranello include a product development center, a hospitality area and the Ferrari museum.
We also own the Mugello racing circuit in Scarperia, near Florence, which we rent to racing events organizers (see “Item 4.B. Business Overview—Formula 1 Activities—The Mugello Circuit”).
We own a second plant in Modena, named Carrozzeria Scaglietti. At this approximately 26 thousand square meter plant we manufacture aluminum bodyworks and chassis for our regular range, special series and prototype cars.
The total carrying value of our property, plant and equipment at December 31, 2015 was €626,130 thousand.
Item 4A. Unresolved Staff Comments
Not applicable.

53


Item 5. Operating and Financial Review and Prospects
MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS OF THE GROUP
The following discussion of our financial condition and results of operations should be read together with the information included under "Item 3.A. Selected Financial Data," "Item 4. Information on the Company" and the Consolidated Financial Statements included elsewhere in this document. This discussion includes forward-looking statements, and involves numerous risks and uncertainties, including, but not limited to, those described under “Forward-Looking Statements" and the "Item 3.D. Risk Factors." Actual results may differ materially from those contained in any forward-looking statements.
Overview
Ferrari is among the world’s leading luxury brands focused on the design, engineering, production and sale of the world’s most recognizable luxury performance sports cars. Our brand symbolizes luxury, exclusivity, innovation, state-of-the-art sporting performance and Italian design and engineering heritage. Our name and history and the image enjoyed by our cars are closely associated with our Formula 1 racing team, Scuderia Ferrari, the most successful team in Formula 1 history. From the inaugural year of Formula 1 in 1950 through the present, Scuderia Ferrari has won 224 Grand Prix races, 16 Constructor World titles and 15 Drivers’ World titles. We believe our history of excellence, technological innovation and defining style transcends the automotive industry, and is the foundation of the Ferrari brand and image. We design, engineer and produce our cars in Maranello, Italy, and sell them in over 60 markets worldwide through a network of 176 authorized dealers operating 198 points of sale.
We believe our cars are the epitome of performance, luxury and styling. We currently sell seven models, including four sports cars (488 GTB, 488 Spider, F12berlinetta and our special series F12 Tour de France, or F12tdf) and three GT cars (California T, FF and our new GTC4Lusso). The 488 GTB and the 488 Spider were launched in 2015 to replace the 458 Italia and 458 Spider, which we produced and sold in 2015 but are now discontinued. The F12tdf, launched in November 2015, is our latest special series and follows the 458 Speciale and 458 Speciale A, which we produced and sold in 2015 but are now discontinued. In February 2016, we unveiled the new GTC4Lusso, our latest GT car, which will replace the FF, with sales expected to begin in the second semester of 2016. We also produce a limited edition supercar, LaFerrari, and very limited editions series (Fuoriserie) and one-off cars.
In 2015, we shipped 7,664 cars, and recorded net revenues of €2,854 million, net profit of €290 million, adjusted earnings before interest, taxes, depreciation, and amortization (Adjusted EBITDA) of €748 million and earnings before interest and taxes (EBIT) of €444 million. For additional information regarding Adjusted EBITDA, which is a non-GAAP measure, including a reconciliation of Adjusted EBITDA to net profit, see “—Non-GAAP Financial Measures—EBITDA and Adjusted EBITDA” below.

We pursue a low volume production strategy in order to maintain a reputation of exclusivity and scarcity among purchasers of our cars and deliberately monitor and maintain our production volumes and delivery wait-times to promote this reputation. We divide our regional markets into EMEA, Americas, Greater China and Rest of APAC, representing respectively 44 percent, 34 percent, 8 percent and 14 percent of units shipped in 2015.
We license the Ferrari brand to a select number of producers and retailers of luxury and lifestyle goods, and we sell Ferrari-branded merchandise through a network of 25 franchised and 12 owned Ferrari stores and on our website. As one of the world’s most recognized premium luxury brands, we believe we are well positioned to selectively expand the presence of the Ferrari brand in attractive and growing lifestyle categories consistent with our image, including sportswear, watches, accessories, consumer electronics and theme parks which we believe enhance the brand experience of our loyal following of clients and Ferrari enthusiasts.
We focus our marketing and promotion efforts in the investments we make in our racing activities, in particular Scuderia Ferrari’s participation in the Formula 1 World Championship, which is one of the most watched annual sports series in the world, with approximately 420 million television viewers annually. Although our most recent Formula 1 world title was in 2008, we are enhancing our focus on Formula 1 activities with the goal of improving recent racing results and restoring our historical position as the premier racing team in Formula 1. We believe that these activities support the strength and awareness of our brand among motor enthusiasts, clients and the general public.

54


We will continue focusing our efforts on protecting and enhancing the value of our brand to preserve our strong financial profile and participate in the premium luxury market growth. We intend to selectively pursue controlled and profitable growth in existing and emerging markets while expanding the Ferrari brand to carefully selected lifestyle categories.
Trends, Uncertainties and Opportunities
Shipments. Our results of operations depend on the achievement of shipment targets established in our budgets and business plans. One of the performance indicators we monitor is shipment volumes, which represent the number of cars we ship to third parties in a given period and which drive net revenues. We recognize revenues from car shipments once it is probable that the economic benefits associated with a transaction will flow to the Group and the revenue can be reliably measured. Revenue is recognized when the risks and rewards of ownership are transferred to our dealers, the sales price is agreed or determinable and collectability is reasonably assured; this generally corresponds to the date on which the cars are released to the carrier responsible for transporting them to dealers.
In general, our shipments do not vary based on changes in demand. Rather, we tend to ship based on volume targets established under our low volume strategy. As part of this strategy, we seek to manage waiting lists in the various markets in which we operate to respond appropriately to relative levels of demand while being sensitive to local client expectations in those markets. In certain markets, we believe that waiting lists have promoted our products’ sense of exclusivity; accordingly we monitor and manage such waiting lists to maintain such exclusivity while ensuring that we do not jeopardize client satisfaction.
In May 2013, we announced our decision to limit the number of cars sold, to approximately 7,000 per year in order to maintain a reputation of exclusivity among purchasers of our cars. In 2014 and 2015 we continued our low volume strategy, while responding to growing demand in emerging markets and from demographic changes as the size and spending capacity of our target clients grew, gradually increasing shipments to 7,664 units in 2015. Our strategic business plan reflects a continuation of this strategy with shipments increasing to approximately 9,000 units per year by 2019.
The following table sets forth our shipments by geographic location:
(Number of cars and % of total cars)
 
For the years ended December 31,
 
 
2015
 
%
 
2014
 
%
 
2013
 
%
EMEA
 
 
 
 
 
 
 
 
 
 
 
 
UK
 
740

 
9.7
%
 
705

 
9.7
%
 
686

 
9.8
%
Germany
 
595

 
7.8
%
 
616

 
8.5
%
 
659

 
9.4
%
Switzerland
 
340

 
4.4
%
 
332

 
4.6
%
 
350

 
5.0
%
Italy
 
285

 
3.7
%
 
243

 
3.3
%
 
206

 
2.9
%
France
 
274

 
3.6
%
 
253

 
3.5
%
 
273

 
3.9
%
Middle East(1)
 
456

 
5.9
%
 
521

 
7.2
%
 
472

 
6.7
%
Rest of EMEA(2)
 
661

 
8.6
%
 
604

 
8.3
%
 
663

 
9.5
%
Total EMEA
 
3,351

 
43.7
%
 
3,274

 
45.1
%
 
3,309

 
47.3
%
Americas(3)
 
2,640

 
34.4
%
 
2,462

 
33.9
%
 
2,382

 
34.0
%
Greater China(4)
 
610

 
8.0
%
 
675

 
9.3
%
 
572

 
8.2
%
Rest of APAC(5)
 
1,063

 
13.9
%
 
844

 
11.6
%
 
737

 
10.5
%
Total
 
7,664

 
100.0
%
 
7,255

 
100.0
%
 
7,000

 
100.0
%
______________________________
(1)Middle East includes the United Arab Emirates, Saudi Arabia, Bahrain, Lebanon, Qatar, Oman and Kuwait.
(2)Rest of EMEA includes Africa and the other European markets not separately identified.
(3)Americas includes the Unites States of America, Canada, Mexico, the Caribbean and Central and South America.
(4)Greater China includes China, Hong Kong and Taiwan.
(5)Rest of APAC mainly includes Japan, Australia, Singapore, Indonesia and South Korea.
We target our products to the upper end of the luxury car segment and buyers of our cars tend to belong to the wealthiest segment of the population. As the size and spending capacity of our target client base has grown significantly in recent years, our addressable market and the sense of exclusivity fostered by our low volume strategy have been further enhanced. In response,

55


we have expanded our distribution capabilities and sought to rebalance the geographic distribution of shipments from several traditional markets, particularly in Europe, to growing markets in Asia, particularly China and the Middle East. For example, in 1993, 90 percent of our cars were sold in Italy, Germany and the United States; those markets now represent less than half of our unit shipments. Furthermore, the profitability of our cars may vary from market to market. Given that our shipment strategy is flexible, we are able to adjust shipment allocations across markets to respond to changes in our key markets.
Research, Development and Product Lifecycle. The design and development process for a new model currently takes approximately 40 months (approximately 33 months for modified, or “M” versions of existing models, depending on the modifications), measured from the beginning of the development project to the start of production. The first stage of the product development phase is the research phase. In this phase, we research the specifications of new models that we believe will appeal to our clients and will be commercially viable. Costs we incur for developments for car project production and related components, engines and systems are recognized as an asset if, and only if, both of the following conditions under IAS 38 - Intangible Assets are met: that development costs can be measured reliably and that the technical feasibility of the product, volumes and pricing support the view that the development expenditure will generate future economic benefits. Capitalized development costs include all direct and indirect costs that may be directly attributed to the development process. Capitalized development costs are amortized on a straight-line basis from the start of production over the estimated lifecycle of the model and the useful life of the components (generally between four and eight years). All other research and development costs are expensed as incurred.
We also incur research and development expenses in connection with Formula 1 racing activities, including initiatives to maximize the performance, efficiency and safety of our racing cars. While we develop these technologies for initial use in our Formula 1 racing car, we seek to transfer these components and technologies, where appropriate, for use in our new models. Technological developments and changes in the regulations of the Formula 1 World Championship lead us to design, develop and construct a new racing car each year. Such costs are expensed in the income statement as incurred and classified as research and development costs. Research and development costs for Formula 1 activities can vary from year to year, often significantly, and may be difficult to predict because they are subject, among other things, to changes in race regulations and the need to respond to our car’s performance relative to other racing teams.
For the year ended December 31, 2015, we capitalized development costs of €154 million and recognized amortization of capitalized development costs of €115 million (compared to €145 million and €125 million, respectively, for the year ended December 31, 2014, and €93 million and €120 million, respectively, for the year ended December 31, 2013).
For the year ended December 31, 2015, we expensed research and development costs of €447 million (€415 million for 2014 and €359 million for 2013).
Our results of operations are dependent on the comparative success of our product offering from period to period. Our models typically have a lifecycle of four to five years. After the fourth or fifth year, a significantly modified version is released. While the modified version may be based on the same platform as its predecessor, the increased technological content of the car, new design and other novel features lead us to consider the model as a new car. A portion of our research and development efforts are related to the development of the various components used in our models, and in particular, electronic and mechanical components. Of the 2015 research and development costs, excluding Formula 1 activities, that were not eligible for capitalization, and as such were expensed, €16 million related to the research on components (€20 million for 2014 and €20 million for 2013). In 2015, we capitalized development costs relating to components of €18 million (€15 million for 2014 and nil for 2013). Our new and modified models generally include new technology content, part of which is related to the output from the component research and development efforts. Our continued focus on component development has the objective of reducing the costs to develop new and modified models.
Demand for our cars tends to be highest in the first year or two from a car’s launch, while in the latter two years demand is generally lower as our clients tend to focus on more recently introduced cars. We believe that our relatively short and predictable lifecycle supports both new car sales and the value of existing models both in the primary and resale markets. We also believe that this lifecycle ensures that our products remain responsive to the expectations of our clients. With the exception of the years in which we renew our product range, our research and development expenditure (excluding Formula 1 research and development) does not normally fluctuate significantly from period to period. As a result of our strategy to update our product range, research and development expenditure peaked in 2015 and we expect to peak again in any future years in which we have a relatively significant number of renewals of the product range.
Car Profitability. The relative profitability of the cars we sell tends to vary depending on a number of factors including engine size, exclusivity of the offering, content of the car and the geographic market in which it is sold. Our products equipped

56


with V12 engines have historically commanded a higher price, and have therefore been more profitable than those equipped with the V8 engine. At December 31, 2015 our V12 product offering included the LaFerrari, the F12berlinetta, the F12tdf and the FF, and our V8 product offering included the 488 GTB, the 488 Spider and the California T. During the periods discussed below we also produced the 458 Italia, the 458 Spider, the 458 Speciale and the 458 Speciale A, which are now discontinued.
Our total shipments (excluding shipments of the LaFerrari and the FXX K, a special racing car that may only be used on race track, deliveries of which started in the second quarter of 2015) represented by V12 models decreased from 26.0 percent in 2013 to 24.3 percent in 2014, primarily driven by an increase in V8 model shipments, then decreased to 16.3 percent in 2015, primarily driven by a decrease in shipments of the FF and the F12berlinetta, which are nearing the end of their product lifecycles. Our recent trend towards a relatively higher proportion of shipments of V8 model sales as compared to V12 models is expected to continue over the next few years based on our current and expected product offerings and anticipated growth plans, and is consistent with industry trends toward cars with smaller displacement and more fuel efficient engines, even among high performance cars.
The exclusivity of a particular product offering is also a relevant factor in its profitability. For example, in November 2013, we launched the LaFerrari, our latest limited edition supercar, which was planned for a total production run of only 499 units. In light of the exclusivity of the offering, along with the “supercar” advanced technological and design content, LaFerrari has a sales price in excess of €1 million, which is much higher than other models in the Ferrari product range. Therefore, our 2014 and 2015 net revenues have benefited significantly from shipments of the LaFerrari. We expect to complete the shipments of the LaFerrari in early 2016. In general, more exclusive offerings generate higher net revenues and provide better margins than those generated on shipments of range models (which include Sports and GT models, V8 and V12 models and represent the core of our product offering) and special series cars. Similarly, our limited edition cars which we launch from time to time are typically sold at a significantly higher price point than our range models and therefore they benefit our results in the periods in which they are sold.
We seek to increase over time the average price point of our range models and special series by continually improving performance, technology and other features, and by leveraging the scarcity value resulting from our low volume strategy. Furthermore, the content of the cars we sell can be customized through our interior and exterior personalization program, which can be further enhanced through bespoke specifications. Incremental revenues from personalization are a particularly favorable factor of our pricing and product mix, due to the fact that we generate a margin on each additional option selected by the client.
Maserati Engine Volumes. In 2011, we began producing a new family of V6 engines for Maserati for use in their cars. In order to meet our obligations under our agreement with Maserati, we constructed a new production line dedicated to the Maserati V6 engine, which was funded by Maserati.
Net revenues generated from the Maserati engine volumes depend on the orders received from Maserati, which in turn depends on Maserati production volumes. Net revenues from Maserati were €170 million in 2015, €251 million in 2014 and €163 million in 2013.
Cost of Sales. Cost of sales comprises expenses incurred in the manufacturing and distribution of cars and parts, including engines rented to other Formula 1 racing teams. Costs of materials, components and labor are the most significant elements of our cost of sales. The remaining costs principally include depreciation, amortization, insurance and transportation costs. Cost of sales also includes warranty, maintenance and product-related costs, which are estimated and recorded at the time of shipment of the car. Expenses that are directly attributable to our financial services companies, including the interest expenses related to their financing as a whole and provisions for risks and write-downs of assets, are also reported in cost of sales.
We purchase a variety of components (including mechanical, steel, aluminum, electrical and electronic, plastic components as well as casting and tires), raw materials (the most significant of which is aluminum) and supplies, and we incur costs of utilities, logistics and other services from numerous suppliers in the manufacture of our cars. Fluctuations in cost of sales are primarily related to the number of cars we produce and sell along with shifts in car mix, as newer models generally have more technologically advanced components and enhancements and therefore higher costs per unit. Supercars and limited edition cars (fuoriserie) also tend to have higher costs per unit but these higher costs tend to be more than offset by higher sales prices. Cost of sales are also affected, to a lesser extent, by fluctuations of certain raw material prices, although, we typically seek to manage these costs and minimize their volatility through the use of fixed price long-term purchase contracts.
In recent years, management has made efforts to achieve technical and commercial efficiencies. In particular, commercial efficiencies have been achieved through negotiating discounts where appropriate and entering into long-term contracts with

57


suppliers, who commit upfront to passing on to us a portion of the efficiencies they achieve in performing our supply contract. Furthermore, efforts are made to award new business to existing suppliers, in order to negotiate favorable pricing. Technical efficiencies include efforts made to produce components using innovative, less expensive materials without compromising the components’ performance. In order to achieve these technical efficiencies, we perform in-house research and development activities and we invite our suppliers to present us with solutions that they have developed.
As cost of sales also includes the depreciation of plant and equipment, cost of sales are affected by product launches, which trigger the commencement of depreciation of plant and equipment acquired specifically for the production of a certain model.
Effects of Foreign Currency Exchange Rates. We are affected by fluctuations in foreign currency exchange rates (i) through translation of foreign currency financial statements into Euro in consolidation, which we refer to as the translation impact, and (ii) through transactions by entities in the Group in currencies other than their own functional currencies, which we refer to as the transaction impact.
Translation impacts arise in preparation of the consolidated financial statements; in particular, we present our consolidated financial statements in Euro, while the functional currency of each of our subsidiaries depends on the primary economic environment of that entity. In preparing the consolidated financial statements, we translate assets and liabilities measured in the functional currency of the subsidiaries into Euro using the foreign currency exchange rate prevailing at the balance sheet date, while we translate income and expenses using the average foreign currency exchange rates for the period covered. Accordingly, fluctuations in the foreign currency exchange rate of the functional currencies of our entities against the Euro impacts our results of operations.
Transaction impacts arise when our entities conduct transactions in currencies other than their own functional currency. We are therefore exposed to foreign currency risks in connection with scheduled payments and receipts in multiple currencies.
Our costs are primarily denominated in Euro, while our net revenues may be denominated in Euro, U.S. Dollars, Japanese Yen, Chinese Yuan or other currencies. In general, for the unhedged portion of our net revenues, an appreciation of the U.S. Dollar against the Euro would positively impact our net revenues and results of operations.
Our risk management policies, both pre and post Separation, contemplate the use of derivative financial instruments to hedge foreign currency exchange rate risk. In particular, we have used derivative financial instruments as cash flow hedges for the purpose of fixing the foreign currency exchange rate at which a predetermined proportion of forecasted transactions denominated in foreign currencies will be accounted for. Accordingly, our results of operations have not been fully exposed to fluctuations in foreign currency exchange rates. See “Item 11. Quantitative and Qualitative Disclosures about Market Risk” for information related to our foreign currency exchange rate risk policies after the Separation.
Regulation. We ship our cars throughout the world and are therefore subject to a variety of laws and regulations. These laws regulate our cars, including their emissions, fuel consumption and safety, and our manufacturing facilities. As we are currently a small volume manufacturer, in certain jurisdictions we benefit from certain regulatory exemptions, including less stringent emissions caps. Developing, engineering and producing cars which meet the regulatory requirements, and can therefore be sold in the relevant markets, requires a significant expenditure of resources.
Critical Accounting Estimates
The Consolidated Financial Statements are prepared in accordance with IFRS which require the use of estimates, judgments and assumptions that affect the carrying amount of assets and liabilities, the disclosure of contingent assets and liabilities and the amounts of income and expenses recognized. The estimates and associated assumptions are based on elements that are known when the financial statements are prepared, on historical experience and on any other factors that are considered to be relevant.
The estimates and underlying assumptions are reviewed periodically and continuously by us. If the items subject to estimates do not perform as assumed, then the actual results could differ from the estimates, which would require adjustment accordingly. The effects of any changes in estimate are recognized in the consolidated income statement in the period in which the adjustment is made, or prospectively in future periods.

58


The items requiring estimates for which there is a risk that a material difference may arise in respect of the carrying amounts of assets and liabilities in the future are discussed below.
Allowance for doubtful accounts
The allowances for doubtful accounts reflect management’s estimate of losses inherent in the dealer and end-client credit portfolio. The allowances for doubtful accounts are based on management’s estimation of the losses to be incurred, which derives from past experience with similar receivables, current and historical past due amounts, write-offs and collections, and careful monitoring of portfolio credit quality.
At December 31, 2015, we had gross receivables from financing activities of €1,192 million (€1,238 million at December 31, 2014) and allowances for doubtful accounts of €19 million at December 31, 2015 or 1.6 percent of the gross balance (€14 million at December 31, 2014, or 1.1 percent of the gross balance). Provisions for doubtful accounts charged to the consolidated income statement as cost of sales were €10 million for the year ended December 31, 2015 (€7 million for the year ended December 31, 2014 and €4 million for year ended December 31, 2013).
At December 31, 2015, we had gross trade receivables of €177 million (€198 million at December 31, 2014) and allowances for doubtful accounts of €18 million, or 10.4 percent of the gross trade receivables balance (€15 million at December 31, 2014, or 7.4 percent of the gross trade receivables balance). Provisions for doubtful accounts charged to the consolidated income statement as selling, general and administrative costs were €10 million for the year ended December 31, 2015 (€6 million for the year ended December 31, 2014 and €11 million for year ended December 31, 2013).
Should economic conditions worsen resulting in an increase in default risk, or if other circumstances arise, the estimates of the recoverability of amounts due to us could be overstated and additional allowances could be required, which could have an adverse impact on our results.
Recoverability of non-current assets with definite useful lives
Non-current assets with definite useful lives include property, plant and equipment and intangible assets. Intangible assets with definite useful lives mainly consist of capitalized development costs.
We periodically reviews the carrying amount of non-current assets with definite useful lives when events and circumstances indicate that an asset may be impaired. Impairment tests are performed by comparing the carrying amount and the recoverable amount of the cash-generating unit (“CGU”). The recoverable amount is the higher of the CGU’s fair value less costs of disposal and its value in use. In assessing the value in use, the estimated future cash flows are discounted to their present value using a pre-tax discount rate that reflects current market assessments of the time value of money and the risks specific to the CGU.
For the period covered by the Consolidated Financial Statements, we have not recognized any impairment charges for non-current assets with definite useful lives.
Recoverability of goodwill
In accordance with IAS 36 - Impairment of Assets, goodwill is not amortized and is tested for impairment annually or more frequently if facts or circumstances indicate that the asset may be impaired.
As the Group is composed of one operating segment, goodwill is tested at the Group level which represents the lowest level within the Group at which goodwill is monitored for internal management purposes in accordance with IAS 36. The impairment test is performed by comparing the carrying amount (which mainly comprises property, plant and equipment, goodwill and capitalized development costs) and the recoverable amount of the CGU. The recoverable amount of the CGU is the higher of its fair value less costs of disposal and its value in use.
Development costs
Development costs are capitalized if the conditions under IAS 38 - Intangible Assets have been met. The starting point for capitalization is based upon the technological and commercial feasibility of the project, which is usually when a product development project has reached a defined milestone according to our established product development model. Feasibility is based on management’s judgment which is formed on the basis of estimated future cash flows. Capitalization ceases and amortization of capitalized development costs begins on start of production of the relevant project.

59


The amortization of development costs requires management to estimate the lifecycle of the related model. Any changes in such assumptions would impact the amortization charge recorded and the carrying amount of capitalized development costs. The periodic amortization charge is derived after determining the expected lifecycle of the related model and, if applicable, any expected residual value at the end of its life. Increasing an asset’s expected lifecycle or its residual value would result in a reduced amortization charge in the consolidated income statement.

The useful lives and residual values of our models are determined by management at the time of capitalization and reviewed annually for appropriateness. The lives are based on historical experience with similar assets as well as anticipation of future events which may impact their life, such as changes in technology. Historically, changes in useful lives and residual values have not resulted in material changes to the amortization charge.

For the year ended December 31, 2015, we capitalized development costs of €154 million (€145 million for the year ended December 31, 2014).
Product warranties and liabilities
We establish reserves for product warranties at the time the sale is recognized. We issue various types of product warranties under which the performance of products delivered is generally guaranteed for a certain period or term, which is generally defined by the legislation in the country where the car is sold. The reserve for product warranties includes the expected costs of warranty obligations imposed by law or contract, as well as the expected costs for policy coverage. The estimated future costs of these actions are principally based on assumptions regarding the lifetime warranty costs of each car line and each model year of that car line, as well as historical claims experience for our cars. In addition, the number and magnitude of additional service actions expected to be approved, and policies related to additional service actions, are taken into consideration. Due to the uncertainty and potential volatility of these estimated factors, changes in the assumptions used could materially affect the results of operations.
We periodically initiate voluntary service actions to address various client satisfaction, safety and emissions issues related to cars sold. Included in the reserve is the estimated cost of these services and recall actions. The estimated future costs of these actions are based primarily on historical claims experience for our cars. Estimates of the future costs of these actions are inevitably imprecise due to several uncertainties, including the number of cars affected by a service or recall action. It is reasonably possible that the ultimate cost of these service and recall actions may require us to make expenditures in excess of (or less than) established reserves over an extended period of time. The estimate of warranty and additional service obligations is periodically reviewed during the year.
In addition, we make provisions for estimated product liability costs arising from property damage and personal injuries including wrongful death, and potential exemplary or punitive damages alleged to be the result of product defects. By nature, these costs can be infrequent, difficult to predict and have the potential to vary significantly in amount. Costs associated with these provisions are recorded in the consolidated income statement and any subsequent adjustments are recorded in the period in which the adjustment is determined.
Other contingent liabilities
We make provisions in connection with pending or threatened disputes or legal proceedings when it is considered probable that there will be an outflow of funds and when the amount can be reasonably estimated. If an outflow of funds becomes possible but the amount cannot be estimated, the matter is disclosed in the notes to the Consolidated Financial Statements. We are the subject of legal and tax proceedings covering a wide range of matters in various jurisdictions. Due to the uncertainty inherent in such matters, it is difficult to predict the outflow of funds that could result from such disputes with any certainty. Moreover, the cases and claims against us often derive from complex legal issues which are subject to a differing degree of uncertainty, including the facts and circumstances of each particular case and the manner in which applicable law is likely to be interpreted and applied to such fact and circumstances, and the jurisdiction and the different laws involved. We monitor the status of pending legal proceedings and consults with experts on legal and tax matters on a regular basis. It is therefore possible that the provisions for our legal proceedings and litigation may vary as the result of future developments in pending matters.
Litigation
Various legal proceedings, claims and governmental investigations are pending against us on a wide range of topics, including car safety; emissions and fuel economy, early warning reporting; dealer, supplier and other contractual relationships; intellectual property rights and product warranty matters. Some of these proceedings allege defects in specific component parts or systems (including airbags, seat belts, brakes, transmissions, engines and fuel systems) in various car models or allege general design defects relating to car handling and stability, sudden unintended movement or crashworthiness. These proceedings seek

60


recovery for damage to property, personal injuries or wrongful death and in some cases could include a claim for exemplary or punitive damages. Adverse decisions in one or more of these proceedings could require us to pay substantial damages, or undertake service actions, recall campaigns or other costly actions.
Litigation is subject to many uncertainties, and the outcome of individual matters is not predictable with assurance. An accrual is established in connection with pending or threatened litigation if a loss is probable and a reliable estimate can be made. Since these accruals represent estimates, it is reasonably possible that the resolution of some of these matters could require us to make payments in excess of the amounts accrued. It is also reasonably possible that the resolution of some of the matters for which accruals could not be made may require us to make payments in an amount or range of amounts that could not be reasonably estimated.
The term “reasonably possible” is used herein to mean that the chance of a future transaction or event occurring is more than remote but less than probable. Although the final resolution of any such matters could have a material effect on our operating results for the particular reporting period in which an adjustment of the estimated reserve is recorded, it is believed that any resulting adjustment would not materially affect the consolidated financial position.
Non-GAAP Financial Measures
We monitor and evaluate our operating and financial performance using several non-GAAP financial measures including: EBITDA, Adjusted EBITDA, Adjusted EBIT, Net Cash/(Net Debt), Net Industrial Cash/(Debt) and Free Cash Flow, as well as a number of financial metrics measured on a constant currency basis. We believe that these non-GAAP financial measures provide useful and relevant information regarding our performance and our ability to assess our financial performance and financial position. They also provide us with comparable measures that facilitate management’s ability to identify operational trends, as well as make decisions regarding future spending, resource allocations and other operational decisions. While similar measures are widely used in the industry in which we operate, the financial measures we use may not be comparable to other similarly titled measures used by other companies nor are they intended to be substitutes for measures of financial performance or financial position as prepared in accordance with IFRS.
EBITDA and Adjusted EBITDA
EBITDA is defined as net profit before income tax expense, net financial expenses/(income) and depreciation and amortization. Adjusted EBITDA is defined as EBITDA as adjusted for income and costs that are significant in nature but expected to occur infrequently. The following table sets forth the calculation of EBITDA and Adjusted EBITDA for the years ended December 31, 2015, 2014 and 2013, and provides a reconciliation of these non-GAAP measures to net profit. EBITDA is presented by management to aid investors in their analysis of the performance of the Group and to assist investors in the comparison of the Group’s performance with that of other companies. Adjusted EBITDA is presented to demonstrate how the underlying business has performed prior to the impact of the adjusted items which may obscure underlying performance and impair comparability of results between periods.


For the years ended December 31,


2015

2014

2013


(€ million)
Net profit

290


265


246

Income tax expense

144


133


120

Net financial expenses/(income)

10


(9
)

(2
)
Amortization and depreciation

275


289


270

EBITDA

719


678


634

Expense related to the resignation of the former Chairman

—


15


—

Expenses incurred in relation to the IPO

16


—


—

Employees extra bonus
 
19


—


—

Gain recognized on disposal of investment property assets and liabilities
 
(6
)

—


—

Adjusted EBITDA

748


693


634


61


Adjusted EBIT
Adjusted EBIT represents EBIT as adjusted for income and costs that are significant in nature but expected to occur infrequently. We present such information in order to present how the underlying business has performed prior to the impact of such items, which may obscure underlying performance and impair comparability of results between the periods. The following table sets forth the calculation of Adjusted EBIT for the years ended December 31, 2015, 2014 and 2013.


For the years ended December 31,


2015

2014

2013


(€ million)
EBIT

444


389


364

Expense related to the resignation of the former Chairman

—


15


—

Expenses incurred in relation to the IPO

16


—


—

Employees extra bonus

19


—


—

Gain recognized on disposal of investment property assets and liabilities

(6
)

—


—

Adjusted EBIT

473


404


364

Net Cash/(Net Debt) and Net Industrial Cash/(Debt)
Net Cash /(Net Debt) is the primary measure which we use to analyze our financial leverage and capital structure, and is one of the key indicators used to measure our financial position. We also monitor Net Industrial Cash/(Debt), which adjusts for the impact of the funded portion of the self-liquidating financial receivables portfolio. The following table sets forth a reconciliation of Net Cash/(Net Debt) and Net Industrial Cash/(Debt) at December 31, 2015 and 2014.

 
At December 31,

 
2015

2014

 
(€ million)
Cash and cash equivalents
 
183

 
134

Deposits in FCA's cash management pools
 
139

 
942

Financial liabilities with FCA Group
 
(3
)
 
(379
)
Financial liabilities with third parties
 
(2,257
)
 
(131
)
Net Cash/(Net Debt)
 
(1,938
)
 
566

Funded portion of the self-liquidating financial receivables portfolio
 
1,141

 
1,061

Net Industrial Cash/(Debt)
 
(797
)
 
1,627

Our Net Cash/(Net Debt) and Net Industrial Cash/(Debt) positions were significantly impacted by the effects of the Restructuring.

62


Free Cash Flow
Free Cash Flow is one of our primary key performance indicators to measure the Group’s performance and is defined as net cash generated from operations less cash flows used in investing activities. The following table sets forth our Free Cash Flow for the years ended December 31, 2015, 2014 and 2013 using information derived from our consolidated statement of cash flows.


For the years ended December 31,


2015

2014

2013


(€ million)
Cash flows from operating activities

707


426


454

Cash flows used in investing activities

(317
)

(290
)

(267
)
Free Cash Flow

390


136


187

Constant Currency Information
The “Results of Operations” discussion below includes information about our net revenues on a constant currency basis. We use this information to assess how the underlying business has performed independent of fluctuations in foreign currency exchange rates. We calculate constant currency by applying the prior-period average foreign currency exchange rates to current period financial data expressed in local currency in which the relevant financial statements are denominated, in order to eliminate the impact of foreign currency exchange rate fluctuations (see Note 2 “Significant Accounting Policies” to the Consolidated Financial Statements, included in this document, for information on the foreign currency exchange rates applied). Although we do not believe that these measures are a substitute for GAAP measures, we do believe that such results excluding the impact of currency fluctuations year-on-year provide additional useful information to investors regarding the operating performance on a local currency basis. For example, if a U.S. entity with U.S. Dollar functional currency recorded net revenues of U.S. $100 million for 2015 and 2014, we would have reported €90 million in net revenues for 2015 (using the 2015 average exchange rate of 1.1094) or a €15 million increase over the €75 million reported for 2014 (using the 2014 average exchange rate of 1.3287). The constant currency presentation would translate the 2015 net revenues using the 2014 foreign currency exchange rates, and therefore indicate that the underlying net revenues on a constant currency basis were unchanged year-on-year.


63


A. Operating Results
Results of Operations
Consolidated Results of Operations – 2015 compared to 2014 and 2014 compared to 2013
The following is a discussion of the results of operations for the year ended December 31, 2015 as compared to the year ended December 31, 2014, and for the year ended December 31, 2014 as compared to the year ended December 31, 2013. The discussion of certain line items (cost of sales, selling, general and administrative costs and research and development costs) includes a presentation of such line items as a percentage of net revenues for the respective periods presented, to facilitate year-over-year comparisons.
 
For the years ended December 31,
 
2015
 
Percentage of net revenues
 
2014
 
Percentage of net revenues
 
2013
 
Percentage of net revenues
 
(€ million, except percentages)
Net revenues
2,854

 
100.0
 %
 
2,762

 
100.0
%
 
2,335

 
100.0
 %
Cost of sales
1,499

 
52.5
 %
 
1,506

 
54.5
%
 
1,235

 
52.9
 %
Selling, general and administrative costs
339

 
11.9
 %
 
300

 
10.9
%
 
260

 
11.1
 %
Research and development costs
562

 
19.7
 %
 
541

 
19.6
%
 
479

 
20.5
 %
Other expenses/(income), net
10

 
0.4
 %
 
26

 
0.9
%
 
(3
)
 
(0.1
)%
EBIT
444

 
15.6
 %
 
389

 
14.1
%
 
364

 
15.6
 %
Net financial income/(expenses)
(10
)
 
(0.4
)%
 
9

 
0.3
%
 
2

 
0.1
 %
Profit before taxes
434

 
15.2
 %
 
398

 
14.4
%
 
366

 
15.7
 %
Income tax expense
144

 
5.0
 %
 
133

 
4.8
%
 
120

 
5.1
 %
Net profit
290

 
10.2
 %
 
265

 
9.6
%
 
246

 
10.5
 %
Net Revenues
The following table sets forth an analysis of our net revenues for the periods indicated:

For the years ended December 31,

Increase/(Decrease)

2015

Percentage of net revenues

2014

Percentage of net revenues

2013

Percentage of net revenues

2015 vs. 2014

2014 vs. 2013

(€ million, except percentages)
Cars and spare parts (1)
2,080


72.9
%

1,944


70.4
%

1,655


70.9
%

136


7.0
 %

289


17.5
%
Engines (2)
219


7.7
%

311


11.3
%

188


8.1
%

(92
)

(29.6
)%

123


65.4
%
Sponsorship, commercial and brand (3)
441


15.5
%

417


15.1
%

412


17.6
%

24


5.8
 %

5


1.2
%
Other (4)
114


3.9
%

90


3.3
%

80


3.4
%

24


26.7
 %

10


12.5
%
Total net revenues
2,854


100.0
%

2,762


100.0
%

2,335


100.0
%

92


3.3
 %

427


18.3
%
______________________________
(1)
Includes the net revenues generated from shipments of our cars, including any personalization revenue generated on these cars and sales of spare parts.
(2)
Includes the net revenues generated from the sale of engines to Maserati for use in their cars, and the revenues generated from the rental of engines to other Formula 1 racing teams.
(3)
Includes the net revenues earned by our Formula 1 racing team through sponsorship agreements and our share of the Formula 1 World Championship commercial revenues and net revenues generated through the Ferrari brand, including merchandising, licensing and royalty income.
(4)
Primarily includes interest income generated by the Ferrari Financial Services group and net revenues from the management of the racetrack.

64


2015 compared to 2014
Net revenues for 2015 were €2,854 million, an increase of €92 million, or 3.3 percent (a decrease of 2.9 percent on a constant currency basis), from €2,762 million for 2014.
The increase in net revenues was attributable to the combination of (i) a €136 million increase in net revenues generated from cars and spare parts, (ii) a €24 million increase in sponsorship, commercial and brand net revenues, and (iii) a €24 million increase in other net revenues, partially offset by (iv) a €92 million decrease in net revenues generated from engines.
Cars and spare parts
Net revenues generated from cars and spare parts were €2,080 million for 2015, an increase of €136 million, or 7.0 percent, from €1,944 million for 2014. The increase was attributable to an €83 million increase in net revenues from supercars and limited edition cars and a €53 million increase in net revenues from range and special series cars and spare parts.
The €83 million increase in net revenues from supercars and limited edition cars was primarily driven by an increase in shipments of the LaFerrari, as well as shipments of the FXX K, which commenced in the second quarter of 2015. In particular, the increase was composed of (i) a €117 million increase in Americas net revenues and (ii) a €12 million increase in Rest of APAC net revenues, partially offset by (iii) a €32 million decrease in EMEA net revenues and (iv) a €14 million decrease in Greater China net revenues.
The €53 million increase in net revenues from range and special series cars and spare parts was primarily driven by higher shipments of V8 models, partially offset by an unfavorable shift in product mix. In particular, shipments of V8 models increased by 16.5 percent, principally related to the California T, the 458 Speciale A, the 488 GTB and the 488 Spider, partially offset by decreases in shipments of the 458 Italia and the 458 Spider, which were phased out during 2015. The proportion of V12 models shipped decreased from 24.3 percent in 2014 to 16.3 percent in 2015, primarily driven by decreases in shipments of the FF and the F12berlinetta, reflecting our typical model lifecycle as these models have been on the market since 2011 and 2012, respectively, and clients tend to focus on more recently introduced cars.
The €53 million increase in net revenues from range and special series cars and spare parts was composed of (i) a €111 m