8-K

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 8-K

CURRENT REPORT

PURSUANT TO SECTION 13 OR 15(d)

OF THE SECURITIES EXCHANGE ACT OF 1934

Date of Report (Date of earliest event reported): May 5, 2014

The ExOne Company

(Exact name of registrant as specified in its charter)

Delaware	001-35806	46-1684608
(State or other jurisdiction of incorporation)	(Commission File Number)	(IRS Employer Identification No.)

127 Industry Boulevard North Huntingdon, Pennsylvania	15642
(Address of principal executive offices)	(Zip Code)

Registrant’s telephone number, including area code: (724) 863-9663

Not Applicable

(Former name or former address, if changed since last report)

Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions (see General Instruction A.2. below):

¨ Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425)

¨ Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12)

¨ Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b))

¨ Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c))

Item 5.07 Submission of Matters to a Vote of Security Holders

On May 5, 2014, The ExOne Company, a Delaware corporation (the “Company”), held its 2014 Annual Meeting of Stockholders (the “Annual Meeting”) in Pittsburgh, Pennsylvania. A total of 11,564,161 of the Company’s shares of Common Stock were present or represented by proxy at the Annual Meeting, representing approximately 80.43% of the Company’s shares of Common Stock that were outstanding and entitled to vote at the Annual Meeting.

The final results of the matters voted on at the Annual Meeting are provided below.

Proposal No. 1: The following individuals were elected as directors to hold office for a one-year term expiring at the 2015 Annual Meeting of Stockholders, or until their respective successors are elected and qualified.

Director Name	For		Withheld		Broker Non-Votes*		Percentage of Votes Cast in Favor
S. Kent Rockwell		6,535,985		84,153		4,974,023		98.73	%
David Burns		6,457,346		162,792		4,974,023		97.54	%
John Irvin		6,228,709		391,429		4,974,023		94.09	%
Raymond J. Kilmer		5,539,229		1,080,909		4,974,023		83.67	%
Victor Sellier		5,538,609		1,081,529		4,974,023		83.66	%
Lloyd A. Semple		6,318,456		301,682		4,974,023		95.44	%
Bonnie K. Wachtel		5,538,187		1,081,951		4,974,023		83.66	%

* Broker non-votes are not counted as having been voted on the proposal, nor do they affect the outcome of Proposal No. 1.

Proposal No. 2: ParenteBeard LLC was ratified as the Company’s Independent Registered Public Accounting Firm for the fiscal year ending December 31, 2014.

For:	11,342,224
Against:	154,760
Abstained:	97,157
Broker Non-Votes:	0
Percentage of Votes Cast in Favor:	97.83	%

Item 7.01 Regulation FD Disclosure

On May 5, 2014, the Company issued a news release announcing that it has introduced Inconel^® Alloy 625 to its 3D printing metal portfolio. A copy of the news release attached hereto as Exhibit 99.1.

Item 9.01 Financial Statements and Exhibits

(d) Exhibits

Exhibit No.	Description
99.1	News Release of The ExOne Company dated May 5, 2014

The information in this Current Report on Form 8-K related to Item 7.01, including Exhibit 99.1 furnished herewith, is being furnished to the SEC pursuant to Item 7.01 of Form 8-K and is not deemed to be “filed” with the SEC for purposes of Section 18 of the Exchange Act or otherwise subject to the liabilities of Section 18. In addition, such information is not to be incorporated by reference into any registration statement of The ExOne Company or other filings made pursuant to the Exchange Act or the Securities Act, unless specifically identified as being incorporated therein by reference.

The furnishing of particular information in this Current Report, including Exhibit 99.1 furnished herewith, pursuant to Item 7.01 of Form 8-K is not intended to, and does not, constitute a determination or admission by The ExOne Company, as to the materiality or completeness of any such information that is required to be disclosed solely by Regulation FD of the Exchange Act.

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.

THE EXONE COMPANY
By:	/s/ Brian W. Smith
	Brian W. Smith
	Chief Financial Officer

Dated: May 7, 2014

EX-99.1

Exhibit 99.1

127 Industry Boulevard • N. Huntingdon, PA 15642 • (724) 863-9663

FOR IMMEDIATE RELEASE

ExOne Introduces Inconel^® Alloy 625 as Newest Addition to its 3D Printing Metal Portfolio

• Represents ExOne’s first single metal alloy more than 99 percent dense

• Validates ExOne’s binder jetting technology as a cost-effective 3D printing industrial solution

• Expands addressable market for applications in the aerospace, chemical and energy markets

NORTH HUNTINGDON, PA, May 5, 2014 – The ExOne Company (NASDAQ: XONE) (“ExOne”), a global provider of three-dimensional (“3D”) printing machines and printed products to industrial customers, announced today that its research and development department, the ExOne Material Applications Laboratory (“ExMAL”), has qualified Inconel^® alloy 625, a nickel-based alloy. This introduction represents ExOne’s first single metal alloy for 3D printing industrial applications at more than 99 percent density, utilizing its binder jetting technology.

Inconel^® alloy 625 is commonly used for components in the aerospace, chemical and energy markets, with applications including gas turbine blades, filtration and separation, heat exchanger and molding processes. The metal is desirable due to its oxidation and corrosion-resistant qualities, able to retain its strength even when subjected to extreme environments such as high pressure or wide temperature ranges. Inconel^® alloy 625 has been qualified for use on ExOne’s M-Flex and X1-Lab 3D printing machines. The Company expects to commercialize Inconel^® alloy 625 around June 1, 2014.

Rick Lucas, ExOne’s Chief Technology Officer, commented, “Our qualification of the more than 99 percent dense Inconel^® alloy 625 further validates ExOne’s binder jetting technology as a cost-effective 3D printing industrial solution. Our machines provide higher volumetric output per unit of time compared with other metal 3D printing technologies, and greater flexibility for simultaneously printing multiple production parts. We believe that the ability to directly print highly dense metal components increases our competitive edge with both subtractive manufacturers and other metal 3D printing technologies.”

The Company’s ExMAL group continues to partner with customers in researching a variety of printing materials. This is part of its ongoing quest to increase ExOne’s portfolio of qualified metals to address a broader opportunity set of applications. ExMAL is in various development stages with several metals, including titanium, which has produced excellent results in preliminary testing and printing research. New materials combined with new product designs tailored to 3D printing will create disruptive market opportunities for customers and also expand the addressable market. In accordance with its strategy, the Company continues to be in varying stages of qualifying additional industrial materials approximately every six months.

For more information regarding the 3D printing process, visit ExOne’s website at www.exone.com.

-MORE-

ExOne Introduces Inconel^® Alloy 625 as Newest Addition to its 3D Printing Metal Portfolio

May 5, 2014

Page 2 of 2

About ExOne

ExOne is a global provider of 3D printing machines and printed products, materials and other services to industrial customers. ExOne’s business primarily consists of manufacturing and selling 3D printing machines and printing products to specification for its customers using its in-house 3D printing machines. ExOne offers pre-production collaboration and print products for customers through its seven PSCs, which are located in the United States, Germany, and Japan. ExOne builds 3D printing machines at its facilities in the United States and Germany. ExOne also supplies the associated materials, including consumables and replacement parts, and other services, including training and technical support, necessary for purchasers of its machines to print products.

Safe Harbor Regarding Forward Looking Statements

This news release contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended.

Forward-looking statements are subject to risks, uncertainties and assumptions and are identified by words such as “expects,” “estimates,” “projects,” “typically,” “anticipates,” “believes,” “appears,” “could,” “plan,” and other similar words. Such statements include, but are not limited to, statements concerning future revenue and earnings, involve known and unknown risks, uncertainties and other factors that could cause the actual results of the Company to differ materially from the results expressed or implied by such statements, which include our ability to qualify more materials in which we can print; the availability of skilled personnel; the impact of increased operating expenses and expenses relating to proposed acquisitions, investments and alliances; our strategy, including the expansion and growth of our operations; the impact of loss of key management; our plans regarding increased international operations in additional international locations; sufficiency of funds for required capital expenditures, working capital, and debt service; the adequacy of sources of liquidity; expectations regarding demand for our industrial products, operating revenues, operating and maintenance expenses, insurance expenses and deductibles, interest expenses, debt levels, and other matters with regard to outlook; demand for aerospace, automotive, heavy equipment, energy/oil/gas and other industrial products; the scope, nature or impact of acquisitions, alliances and strategic investments and our ability to integrate acquisitions and strategic investments; liabilities under laws and regulations protecting the environment; the impact of governmental laws and regulations; operating hazards, war, terrorism and cancellation or unavailability of insurance coverage; the effect of litigation and contingencies; the impact of disruption of our manufacturing facilities or PSCs; the adequacy of our protection of our intellectual property; material weaknesses in our internal control over financial reporting and other factors disclosed in the Company’s Annual Report on Form 10-K and other periodic reports filed with the Securities and Exchange Commission. Because they are forward-looking, these statements should be evaluated in light of important risk factors and uncertainties.

Should one or more of these risks or uncertainties materialize, or should any of ExOne’s underlying assumptions prove incorrect, actual results may vary materially from those currently anticipated. The Company disclaims any obligation to update or publicly announce any revisions to any of the forward-looking statements contained in this news release.

For more information, contact:

Brian Smith	Deborah K. Pawlowski/Karen L. Howard
Chief Financial Officer	Kei Advisors LLC
(724) 765-1350	(716) 843-3908 /(716) 843-3942
brian.smith@exone.com	dpawlowski@keiadvisors.com / khoward@keiadvisors.com

###