The outstanding balances under the Company’s credit facilities were as follows (in thousands):

(1)

Deferred financing fees associated with the asset based credit facility as of February 1, 2020 and February 2, 2019 were $2.6 million and $3.4 million, respectively, and are included in other non-current assets on the consolidated balance sheets. The deferred financing fees are amortized on a straight line basis over the life of the revolving line of credit, which has a maturity date of June 28, 2022.

(2)

Represents total equipment security notes secured by certain of the Company’s property and equipment, of which $22.0 million outstanding was included in other current liabilities. The remaining $31.4 million outstanding, included in other non-current obligations on the consolidated balance sheets, has principal payments due of $23.0 million, $7.9 million and $0.5 million in fiscal 2021, fiscal 2022 and fiscal 2023, respectively.

Asset Based Credit Facility & Term Loan Facilities

In August 2011, Restoration Hardware, Inc., along with its Canadian subsidiary, Restoration Hardware Canada, Inc., entered into a credit agreement with Bank of America, N.A., as administrative agent, and certain other lenders (the “Original Credit Agreement”).

On June 28, 2017, Restoration Hardware, Inc. entered into an eleventh amended and restated credit agreement (the “Credit Agreement”) among Restoration Hardware, Inc., Restoration Hardware Canada, Inc., various subsidiaries of RH named therein as borrowers or guarantors, the lenders party thereto and Bank of America, N.A. as administrative agent and collateral agent (“First Lien Administrative Agent”), which amended and restated the Original Credit Agreement. The Credit Agreement has a revolving line of credit with initial availability of up to $600.0 million, of which $10.0 million is available to Restoration Hardware Canada, Inc., and includes a $200.0 million accordion feature under which the revolving line of credit may be expanded by agreement of the parties from $600.0 million to up to $800.0 million if and to the extent the lenders, whether existing lenders or new lenders, agree to increase their credit commitments. In addition, the Credit Agreement established an $80.0 million last in, last out (“LILO”) term loan facility. The maturity date of the Credit Agreement is June 28, 2022.

In June 2018, the Company repaid the LILO term loan in full. As a result of the repayment, the Company incurred a $0.5 million loss on extinguishment of debt in fiscal 2018, which represents the acceleration of amortization of debt issuance costs. The Company did not incur any prepayment penalties upon the early extinguishment of the LILO term loan.

On June 12, 2018, Restoration Hardware, Inc. entered into a First Amendment (the “First Amendment”) to the Credit Agreement. The First Amendment (a) changed the Credit Agreement’s definition of “Eligible In-Transit Inventory” to clarify the requirements to be fulfilled by the borrowers with respect to such in-transit inventory, and (b) clarified that no Default or Event of Default was caused by any prior non-compliance with such requirements with respect to in-transit inventory. Eligible In-Transit Inventory consists of inventory being shipped from vendor locations outside of the United States. Qualifying in-transit inventory is included within the Company’s borrowing base for eligible collateral for purposes of determining the amount of borrowing available to borrowers under the Credit Agreement.

On November 23, 2018, Restoration Hardware, Inc. entered into a Consent and Second Amendment (the “Second Amendment”) to the Credit Agreement. The Second Amendment included certain clarifying changes to among

other things: (a) address the processing of payments from insurance proceeds in connection with casualty or other insured losses with respect to property or assets of a Loan Party, and (b) add an additional category of permitted restricted payment to allow the lead borrower to make annual restricted payments of up to $3 million per fiscal year to cover payments of certain administrative and other obligations of RH in the ordinary course of business.

On April 4, 2019, Restoration Hardware, Inc., entered into a third amendment to the Credit Agreement (the “Third Amendment”). The Third Amendment, among other things, (a) established a $120.0 million first in, last out (“FILO”) term loan facility, which amount was fully borrowed as of April 4, 2019 and which incurs interest at a rate that is 1.25% greater than the interest rate applicable to the revolving loans provided for under the Credit Agreement at any time, (b) provided for additional permitted indebtedness, as defined in the Credit Agreement, that the loan parties can incur, and (c) modified the borrowing availability under the Credit Agreement in certain circumstances.

The Company repaid the full amount of the FILO term loan as of February 1, 2020. As a result of the repayment, the Company incurred a $0.8 million loss on extinguishment of debt in fiscal 2019, which represents the acceleration of amortization of debt issuance costs. The Company did not incur any prepayment penalties upon the early extinguishment of the FILO term loan.

On May 31, 2019, Restoration Hardware, Inc. entered into a fourth amendment to the Credit Agreement (the “Fourth Amendment”). The Fourth Amendment, among other things, amended the Credit Agreement to (a) extend the time to deliver monthly financial statements to the lenders for the fiscal months ending February 2019 and March 2019 until June 19, 2019, (b) remove the requirement to deliver monthly financial statements to the lenders for the last fiscal month of any fiscal quarter, and (c) waive any default or event of default under the Credit Agreement relating to the delivery of monthly financial statements or other information to lenders for the fiscal months ending February 2019 and March 2019.

The availability of credit at any given time under the Credit Agreement is limited by reference to a borrowing base formula based upon numerous factors, including the value of eligible inventory and eligible accounts receivable. As a result of the borrowing base formula, actual borrowing availability under the revolving line of credit could be less than the stated amount of the revolving line of credit (as reduced by the actual borrowings and outstanding letters of credit under the revolving line of credit). All obligations under the Credit Agreement are secured by substantially all of the assets, including accounts receivable, inventory, intangible assets, property, equipment, goods and fixtures of Restoration Hardware, Inc., Restoration Hardware Canada, Inc., RH US, LLC, Waterworks Operating Co., LLC and Waterworks IP Co., LLC.

Borrowings under the revolving line of credit are subject to interest, at the borrowers’ option, at either the bank’s reference rate or London Inter-bank Offered Rate (“LIBOR”) (or, in the case of the revolving line of credit, the Bank of America “BA” Rate or the Canadian Prime Rate, as such terms are defined in the Credit Agreement, for Canadian borrowings denominated in Canadian dollars or the United States Index Rate or LIBOR for Canadian borrowings denominated in United States dollars) plus an applicable margin rate, in each case.

The Credit Agreement contains various restrictive covenants, including, among others, limitations on the ability to incur liens, make loans or other investments, incur additional debt, issue additional equity, merge or consolidate with or into another person, sell assets, pay dividends or make other distributions, or enter into transactions with affiliates, along with other restrictions and limitations typical to credit agreements of this type and size. The Credit Agreement also contains various affirmative covenants, including the obligation to deliver notice to the First Lien Administrative Agent following the Company’s obtaining knowledge of any matter that has resulted or could reasonably be expected to result in a “Material Adverse Effect” (as defined in the Credit Agreement).

In addition, under the Credit Agreement, the Company is required to meet specified financial ratios in order to undertake certain actions, and the Company may be required to maintain certain levels of excess availability or meet a specified consolidated fixed-charge coverage ratio (“FCCR”). Subject to certain exceptions, the trigger for the FCCR occurs if the domestic availability under the revolving line of credit is less than the greater of (i) $40.0 million and (ii) 10% of the lesser of (x) the domestic revolving commitments under the Credit Agreement and (y) the domestic revolving borrowing base. If the availability under the Credit Agreement is less than the foregoing amount, then Restoration

Hardware, Inc. is required subject to certain exceptions to maintain an FCCR of at least one to one. As of February 1, 2020, Restoration Hardware, Inc. was in compliance with all applicable financial covenants of the Credit Agreement.

The Credit Agreement requires a daily sweep of all cash receipts and collections to prepay the loans under the agreement while (i) an event of default exists or (ii) the availability under the revolving line of credit for extensions of credit is less than the greater of (A) $40.0 million and (B) 10% of the sum of (a) the lesser of (x) the aggregate revolving commitments under the Credit Agreement and (y) the aggregate revolving borrowing base, plus (b) the lesser of (x) the then outstanding amount of the LILO term loan or (y) the LILO term loan borrowing base.

The Credit Agreement includes customary events of default, in certain cases subject to customary periods to cure. The occurrence of an event of default, following the applicable cure period, would permit the lenders to, among other things, terminate any existing commitments under the Credit Agreement and declare the unpaid principal, accrued and unpaid interest and all other amounts payable under the Credit Agreement to be immediately due and payable.

As of February 1, 2020, the Company had no outstanding borrowings under the revolving credit facility portion of the Credit Agreement. The availability of credit at any given time under the Credit Agreement is limited by reference to a borrowing base formula based upon numerous factors, including the value of eligible inventory and eligible accounts receivable. As a result of the borrowing base formula, actual borrowing availability under the revolving line of credit could be less than the stated amount of the revolving line of credit (as reduced by the actual borrowings and outstanding letters of credit under the revolving line of credit). Under the terms of such provisions, the amount under the revolving line of credit borrowing base that could be available pursuant to the Credit Agreement as of February 1, 2020 was $321.7 million, net of $13.2 million in outstanding letters of credit.

Second Lien Credit Agreement

On April 10, 2019, Restoration Hardware, Inc., entered into a credit agreement, dated as of April 9, 2019 and effective as of April 10, 2019 (the “Second Lien Credit Agreement”), among (i) Restoration Hardware, Inc., as lead borrower, (ii) the guarantors party thereto, (iii) the lenders party thereto, each of whom were managed or advised by either Benefit Street Partners L.L.C. and its affiliated investment managers or Apollo Capital Management, L.P. and its affiliated investment managers, and (iv) BSP Agency, LLC, as administrative agent and collateral agent (the “Second Lien Administrative Agent”) with respect to a second lien term loan in an aggregate principal amount equal to $200.0 million with a maturity date of April 9, 2024 (the “Second Lien Term Loan”). The second lien term loan of $200.0 million in principal was repaid in full on September 20, 2019. As a result of the repayment, the Company incurred a $6.7 million loss on extinguishment of debt, which includes a prepayment penalty of $4.0 million and acceleration of amortization of debt issuance costs of $2.7 million.

The Second Lien Term Loan bore interest at an annual rate generally based on LIBOR plus 6.50%. This rate was a floating rate that reset periodically based upon changes in LIBOR rates during the life of the Second Lien Term Loan. At the date of the initial borrowing, the rate was set at one-month LIBOR plus 6.50%.

Intercreditor Agreement

On April 10, 2019, in connection with the Second Lien Credit Agreement, Restoration Hardware, Inc. entered into an Intercreditor Agreement (the “Intercreditor Agreement”), dated as of April 9, 2019 and effective as of April 10, 2019, with the First Lien Administrative Agent and the Second Lien Administrative Agent. The Intercreditor Agreement established various customary inter-lender terms, including, without limitation, with respect to priority of liens, permitted actions by each party, application of proceeds, exercise of remedies in case of default, releases of liens and certain limitations on the amendment of the Credit Agreement and the Second Lien Credit Agreement without the consent of the other party. The Intercreditor Agreement is no longer in effect after repayment of the Second Lien Term Loan on September 20, 2019.

Equipment Loan Facility

On September 5, 2017, Restoration Hardware, Inc. entered into a Master Loan and Security Agreement with Banc of America Leasing & Capital, LLC (“BAL”) pursuant to which BAL and the Company agreed that BAL would finance certain equipment of the Company from time to time, with each such equipment financing to be evidenced by an equipment security note setting forth the terms for each particular equipment loan. Each equipment loan is secured by a purchase money security interest in the financed equipment. As of February 1, 2020, the Company had $53.4 million in aggregate amounts outstanding under the equipment security notes at a weighted-average interest rate of 4.56%. The maturity dates of the equipment security notes vary, but generally have a maturity of three or four years. The Company is required to make monthly installment payments under the equipment security notes.