10-Q

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, DC 20549

________________________________________________________

FORM 10-Q

________________________________________________________

(Mark One)

x QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended March 31, 2024

OR

o TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from     to

Commission File Number: 001-39135

________________________________________________________

SiTime Corporation

(Exact name of registrant as specified in its charter)

________________________________________________________

Delaware	02-0713868
(State or other jurisdiction of incorporation or organization)	(I.R.S. Employer Identification No.)
5451 Patrick Henry Drive Santa Clara, CA	95054
(Address of principal executive offices)	(Zip Code)

Registrant’s telephone number, including area code: (408) 328-4400

________________________________________________________

Securities registered pursuant to Section 12(b) of the Act:

Title of each class	Trading Symbol(s)	Name of each exchange on which registered
Common Stock, $0.0001 par value per share	SITM	The Nasdaq Stock Market LLC

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  o

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).    Yes  x    No  o

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer	x	Accelerated filer	o
Non-accelerated filer	o	Smaller reporting company	o
Emerging growth company	o

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.  o

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  o    No  x

As of May 1, 2024, the registrant had 22,871,540 shares of common stock, $0.0001 par value per share, outstanding.

Table of Contents

		Page
	Risk Factor Summary	1
PART I.	FINANCIAL INFORMATION	3
Item 1.	Financial Statements (Unaudited)	3
	Condensed Consolidated Balance Sheets	3
	Condensed Consolidated Statements of Operations and Comprehensive Loss	4
	Condensed Consolidated Statements of Stockholders’ Equity	5
	Condensed Consolidated Statements of Cash Flows	6
	Notes to Unaudited Condensed Consolidated Financial Statements	7
Item 2.	Management’s Discussion and Analysis of Financial Condition and Results of Operations	18
Item 3.	Quantitative and Qualitative Disclosures About Market Risk	25
Item 4.	Controls and Procedures	26
PART II.	OTHER INFORMATION
Item 1.	Legal Proceedings	27
Item 1A.	Risk Factors	27
Item 5.	Other Information	50
Item 6.	Exhibits	52
Signatures		53

i

RISK FACTORS SUMMARY

Our business is subject to numerous risks, as more fully described in Part II, Item 1A "Risk Factors” below. You should read these risks before you invest in our common stock. We may be unable, for many reasons, including those that are beyond our control, to implement or execute our business strategy. In particular, risks associated with our business include, among others:

•Global macroeconomic conditions have harmed and may continue to harm our business;

•We are subject to the cyclical nature of the semiconductor industry;

•We have historically depended on a limited number of customers for a significant portion of our revenue; if we are unable to expand or further diversify our customer base, our business, financial condition, and results of operations could suffer, and the loss of, or a significant reduction in orders from our customers, including a large customer or end customer, could significantly reduce our revenue and adversely impact our operating results;

•Because we do not typically have long-term purchase commitments with our customers, orders may be cancelled, reduced, or rescheduled with little or no notice, which in turn exposes us to inventory risk, and may cause our business and results of operations to suffer;

•Our revenue and operating results may fluctuate from period to period due to, among other factors, macroeconomic conditions, cyclical fluctuations in the semiconductor market, customer demand, product life cycles, fluctuations in inventories held by our distributors or end customers, the gain or loss of significant customers, the availability of capacity in our supply chain, research and development costs, the impact of any pandemic, epidemic, or outbreak of disease, including the emergence of new variants of COVID-19, on our business as well as our suppliers and customers, and product warranty claims. This in turn could cause our stock price to decline;

•The third parties we rely upon for our raw materials, engineered materials, wafer fabrication and supply, assembly, packaging and testing may be unable to secure raw materials, reduce their resources available to us and our immediate suppliers, not meet satisfactory yields or quality, or increase pricing, which could harm our ability to ship our solutions to our customers on time and in the quantity required which could cause an unanticipated decline in our sales and loss of customers;

•A significant portion of our operations is located outside of the United States, which subjects us to additional risks, including increased complexity and costs of managing international operations and geopolitical instability;

•Our success and future revenue depend on our ability to achieve design wins and to convince our current and prospective customers to design our products into their product offerings, as well as our customers’ ability to develop products that achieve market acceptance;

•Our target customer and product markets may not grow or develop as we currently expect, and if we fail to penetrate new markets and scale successfully within those markets, our revenue and financial condition would be harmed;

•If we are not able to successfully introduce and ship in volume new products in a timely manner, our business and revenue will suffer;

•Pandemics, epidemics, or other outbreaks of disease have had and may in the future have an adverse impact upon our business, results of operations, and financial condition, as well as the businesses of our suppliers and customers;

•Our gross margins may fluctuate due to a variety of factors, which could negatively impact our results of operations and our financial condition;

1

•Our revenue in previous periods may not be indicative of future performance and our revenue may fluctuate over time;

•Our customers require our products and our third-party contractors to undergo a lengthy and expensive qualification process, which does not assure product sales. If we are unsuccessful or delayed in qualifying any of our products with a customer, our business and operating results would suffer;

•We provide a lifetime warranty on our products and may be subject to warranty or product liability claims, which could harm our reputation, result in unexpected expenses, and cause us to lose market share;

•Defects in our products could harm our relationships with our customers and damage our reputation;

•If we fail to compete effectively, we may lose or fail to gain market share, which could negatively impact our operating results and our business;

•We may make acquisitions in the future that could disrupt our business, cause dilution to our stockholders, reduce our financial resources, and harm our business;

•We may not be able to accurately predict our future capital needs, and we may not be able to obtain additional financing to fund our operations;

•We may seek, or be required to seek debt financing;

•If significant tariffs or other trade restrictions are placed on our products or third-party suppliers, our revenue and results of operations may be materially harmed;

•Failure to comply with the laws associated with our activities outside of the United States could subject us to penalties and other adverse consequences;

•We are subject to government regulation, including import, export and economic sanctions laws and regulations that may expose us to liability and increase our costs;

•New or future changes to U.S. and non-U.S. tax laws, or tax regulatory authorities disagreeing with our positions and conclusions regarding certain tax positions, could materially adversely affect us;

•Breaches, cyberattacks, or other disruptions to our information technology systems owned or maintained by us or third parties could disrupt our operations, compromise confidentiality of private customer data or our intellectual property, and adversely affect our business, reputation, operations, and financial results;

•We may fail to adequately protect our intellectual property and have received, and may in the future receive, claims of intellectual property infringement, misappropriation, or other claims, which in turn could result in significant expense, result in the loss of significant rights, and harm our relationship with our end customers and distributors;

•We may be impacted by risks associated with MegaChips’ ownership of a significant portion of our stock, for instance as long as MegaChips holds a significant amount of our stock, our other shareholders’ ability to influence matters requiring stockholder approval will be limited, and there could be potential conflicts of interest between us and affiliates of MegaChips, which could impact our business and operating results;

•Substantial future sales of our common stock could cause the market price of our common stock to decline; and

•Anti-takeover provisions in our charter documents and under Delaware law could make an acquisition of us more difficult, limit attempts by our stockholders to replace or remove our current management and limit the market price of our common stock.

2

PART I—FINANCIAL INFORMATION

Item 1. Financial Statements.

SiTime Corporation

Condensed Consolidated Balance Sheets

(In thousands, except per share amounts)

(Unaudited)

	As of
	March 31, 2024		December 31, 2023
Assets:
Current assets:
Cash and cash equivalents	$	96,275	$	9,468
Short-term investments in held-to-maturity securities	421,006		518,733
Accounts receivable, net	16,774		21,861
Inventories	74,376		65,539
Prepaid expenses and other current assets	9,744		7,641
Total current assets	618,175		623,242
Property and equipment, net	53,394		54,685
Intangible assets, net	175,236		177,079
Right-of-use assets, net	7,582		8,262
Goodwill	87,098		87,098
Other assets	1,138		1,317
Total assets	$	942,623	$	951,683
Liabilities and Stockholders' Equity:
Current liabilities:
Accounts payable	$	10,790	$	8,690
Accrued expenses and other current liabilities	108,607		112,704
Total current liabilities	119,397		121,394
Other non-current liabilities	127,016		122,237
Total liabilities	246,413		243,631
Commitments and contingencies (Note 9)
Stockholders’ equity:
Common stock, $0.0001 par value - 200,000 shares authorized; 22,872 and 22,692 shares issued and outstanding at March 31, 2024 and December 31, 2023	2		2
Additional paid-in capital	813,312		796,450
Accumulated deficit	(117,104)		(88,400)
Total stockholders’ equity	696,210		708,052
Total liabilities and stockholders’ equity	$	942,623	$	951,683

The accompanying notes are an integral part of these condensed consolidated financial statements.

3

SiTime Corporation

Condensed Consolidated Statements Of Operations And Comprehensive Loss

(In thousands, except per share amounts)

(Unaudited)

	Three Months Ended March 31,
	2024		2023
Revenue	$	33,022	$	38,343
Cost of revenue	15,361		15,302
Gross profit	17,661		23,041
Operating expenses:
Research and development	25,544		24,457
Selling, general and administrative	23,913		20,733
Acquisition related costs	3,242		—
Total operating expenses	52,699		45,190
Loss from operations	(35,038)		(22,149)
Interest income	6,560		5,629
Other income (expense), net	(213)		100
Loss before income taxes	(28,691)		(16,420)
Income tax expense	(13)		(70)
Net loss	$	(28,704)	$	(16,490)
Net loss attributable to common stockholders and comprehensive loss	$	(28,704)	$	(16,490)
Net loss per share attributable to common stockholders, basic	$	(1.26)	$	(0.76)
Net loss per share attributable to common stockholders, diluted	$	(1.26)	$	(0.76)
Weighted-average shares used to compute basic net loss per share	22,765		21,794
Weighted-average shares used to compute diluted net loss per share	22,765		21,794

The accompanying notes are an integral part of these condensed consolidated financial statements.

4

SiTime Corporation

Condensed Consolidated Statements Of Stockholders' Equity

(In thousands)

(Unaudited)

	Common Stock			Additional Paid-in Capital		Accumulated Deficit		Total Stockholders' Equity
	Shares	Amount
Balances at December 31, 2023	22,692	$	2	$	796,450	$	(88,400)	$	708,052
Stock-based compensation expense	—	—		22,894		—		22,894
Net loss	—	—		—		(28,704)		(28,704)
Issuance of common stock in connection with At-The-Market offering net of underwriting discounts and commissions and other offering costs	33	—		2,706		—		2,706
Issuance of shares upon vesting of restricted stock units, net of tax withholdings	147	—		(8,738)		—		(8,738)
Balances at March 31, 2024	22,872	$	2	$	813,312	$	(117,104)	$	696,210
Balances at December 31, 2022	21,702	$	2	$	716,343	$	(7,865)	$	708,480
Stock-based compensation expense	—	—		19,136		—		19,136
Net loss	—	—		—		(16,490)		(16,490)
Issuance of common stock in connection with At-The-Market offering net of underwriting discounts and commissions and other offering costs	100	—		12,749		—		12,749
Issuance of shares upon vesting of restricted stock units, net of tax withholdings	150	—		(10,215)		—		(10,215)
Balances at March 31, 2023	21,952	$	2	$	738,013	$	(24,355)	$	713,660

The accompanying notes are an integral part of these condensed consolidated financial statements.

5

SiTime Corporation

Condensed Consolidated Statements Of Cash Flows

(In thousands)

(Unaudited)

	Three Months Ended March 31,
	2024		2023
Cash flows from operating activities:
Net loss	$	(28,704)	$	(16,490)
Adjustments to reconcile net loss to net cash provided by operating activities
Depreciation and amortization expense	5,601		3,824
Stock-based compensation expense	21,703		18,536
Net change in unrealized interest on held to maturity securities	3,589		212
Change in fair value of sales based earnout liability	1,041		—
Change in fair value of acquisition consideration payable	1,585		—
Inventory write-down	826		771
Changes in assets and liabilities:
Accounts receivable, net	5,087		19,765
Inventories	(9,182)		(3,132)
Prepaid expenses and other assets	(1,923)		(2,895)
Accounts payable	2,591		(6,430)
Accrued expenses and other liabilities	(485)		(2,212)
Net cash provided by operating activities	1,729		11,949
Cash flows from investing activities
Purchase of held to maturity securities	(294,393)		(379,543)
Proceeds from maturity of held to maturity securities	388,531		371,007
Purchase of property and equipment	(2,907)		(2,094)
Cash paid for intangibles	(121)		(191)
Net cash provided by (used in) investing activities	91,110		(10,821)
Cash flows from financing activities
Tax withholding paid on behalf of employees for net share settlement	(8,738)		(10,215)
Proceeds from public offering	3,009		13,119
Payments for offering costs	(303)		(370)
Net cash provided by (used in) financing activities	(6,032)		2,534
Net increase in cash and cash equivalents	86,807		3,662
Cash and cash equivalents
Beginning of period	9,468		34,603
End of period	$	96,275	$	38,265
Supplemental disclosure of cash flow information
Income taxes paid	12		104
Supplemental disclosure of noncash investing and financing activities
Unpaid property and equipment	375		486

The accompanying notes are an integral part of these condensed consolidated financial statements.

6

SiTime Corporation

Notes To Unaudited Condensed Consolidated Financial Statements

Note 1. The Company and Basis of Presentation

SiTime Corporation (the “Company”) was incorporated in the State of Delaware in December 2003. The Company is a leading provider of Precision Timing solutions to the global electronics industry, providing the timing functionality that is needed for electronics to operate reliably and correctly. The Company's products have been designed to address a wide range of applications across a broad array of end markets. The Company operates a fabless business model and leverages its global network of distributors to address the broad set of end markets that it serves.

The accompanying interim condensed consolidated financial statements have been prepared in conformity with United States (U.S.) generally accepted accounting principles (GAAP) for interim financial information and the instructions to Form 10-Q and Article 10 of Regulation S-X, and should be read in conjunction with the Company's audited consolidated financial statements and related notes thereto filed with the U.S. Securities and Exchange Commission (SEC) on Form 10-K for the fiscal year ended December 31, 2023. The interim financial statements are unaudited, but reflect all adjustments which are, in the opinion of management, of a normal, recurring nature necessary to provide a fair statement of results for the interim periods presented. The results of operations for the interim periods shown in this report are not necessarily indicative of the results that may be expected for the fiscal year ending December 31, 2024, for any future year, or for any other future interim period.

The preparation of financial statements in conformity with U.S. GAAP requires management to make estimates and assumptions that affect the amounts reported in the financial statements and accompanying notes. Actual results could differ from those estimates.

Principles of Consolidation

The condensed consolidated financial statements include the accounts of the Company and its wholly-owned subsidiaries. All intercompany transactions and balances have been eliminated in consolidation.

Significant Accounting Policies

The Company’s significant accounting policies are disclosed in the Company’s audited consolidated financial statements and related notes thereto included in the Annual Report on Form 10-K for the year ended December 31, 2023. There have been no changes to these accounting policies through March 31, 2024.

Recent Accounting Pronouncements

There are currently no new accounting pronouncements with a future effective date that are considered material, or could be material, to us.

Note 2. Acquisitions

On December 1, 2023, we completed our acquisition of Aura's timing business and clock products, and an assembled workforce. The acquisition qualified as a business combination in accordance with ASC 805, Business Combinations and, accordingly, total consideration was first allocated to the fair value of assets acquired as of the date of acquisition, with the excess being recorded as goodwill. The acquisition date fair value of the purchase consideration was $259.2 million, which comprised the following:

	Estimated Fair Value
	(in thousands)
Fixed consideration	$	139,946
Fair value of sales based earnout liability	102,278
Settlement of pre-existing arrangement	16,974
Total purchase consideration	$	259,198

The preliminary purchase consideration allocation to the assets acquired based on their respective estimated fair values as of the date of acquisition is as follows:

7

	Estimated Fair Value (Preliminary)		Estimated Useful Life	Financial Statement Line Item
	(in thousands)		(in years)
Developed Technology	$	96,700	5 to 8 years	Intangible assets, net
In-process research and development	69,500		Indefinite	Intangible assets, net
Assumed customer agreements	5,900		4 years	Intangible assets, net
Goodwill	87,098		Indefinite	Goodwill
Total assets acquired	$	259,198

Following are the supplemental consolidated financial results of the Company on an unaudited pro forma basis, as if the acquisition had been consummated on January 1, 2023:

	Three Months Ended March 31,
Unaudited pro forma information	2024		2023
	(in thousands)
Revenue	$	33,022	$	38,743
Net loss	$	(28,705)	$	(27,085)

The supplemental pro forma information presents the combined results of operations for the three months ended March 31, 2024 and 2023, as if the acquisition was completed on January 1, 2023, the first day of the fiscal year of 2023. The supplemental pro forma financial information presented above is not necessarily indicative of the financial position or results of operations that would have been realized if the acquisition had been completed on the date indicated. The supplemental pro forma financial information does not reflect synergies that might have been achieved, nor is it indicative of future operating results or financial position. The proforma financial information includes a $6.5 million nonrecurring adjustment related to acquisition costs.

Note 3. Fair Value Measurements

Cash equivalents

At March 31, 2024 and December 31, 2023, highly liquid money market funds of $93.7 million and $0.4 million, respectively, were valued using Level 1 of the fair value hierarchy, quoted prices in active markets for identical assets, and are included in cash equivalents.

Short-term investments in held-to-maturity securities

As of March 31, 2024 and December 31, 2023, the Company had purchased Treasury Bills with maturities ranging from 3 to 12 months, which the Company intends to hold until maturity and has classified as held-to-maturity securities. The held-to-maturity securities are recorded at amortized cost totaling $421.0 million including gross accrued interest of $5.3 million as of March 31, 2024. As of March 31, 2024, the fair value and gross unrealized loss on the held-to-maturity securities was $420.6 million and $0.4 million respectively.

As of December 31, 2023, the amortized cost of the held-to-maturity securities totaled $518.7 million including gross accrued interest of $8.9 million. As of December 31, 2023, the fair value and gross unrealized loss on the held-to-maturity securities $519.0 million and $0.3 million respectively.

These treasury bills were valued using Level 1 of the fair value hierarchy, quoted prices in active markets for identical assets, and are included in short-term investments. The carrying value of our investments is reviewed quarterly for changes in circumstances or the occurrence of events that suggests an investment may not be fully recoverable.

Sales based earnout liability

The estimated fair value of the sales based earnout liability is determined using a Monte Carlo simulation model using significant unobservable fair value inputs and is therefore classified as a Level 3 measurement. The assumptions used in the calculation are based on the revenue projections over the term of the contingent earn-out period, expected volatility, and discount rate. The estimates of fair value are uncertain and changes in any of the estimated inputs used will result in significant adjustments to the fair value. As of March 31, 2024, the Company used a volatility rate of 20%, discount rate ranging from 4.2% to 5.4%, and an expected term ranging from 0.13 years to 4.63 years.

The following table sets forth a summary of the changes in the fair value of the Company’s Level 3 financial liabilities:

8

	Amount
Fair value as of January 1, 2024	$	103,461
Change in the fair value during the year	1,041
Fair value as of March 31, 2024	$	104,502

There were no transfers between Level 1, Level 2, and Level 3 categories during any of the periods presented.

Note 4. Balance Sheet Components

Accounts Receivable, net

Accounts receivable, net consisted of the following:

	As of
	March 31, 2024		December 31, 2023		December 31, 2022
	(in thousands)
Accounts receivable, gross	$	16,824	$	21,911	$	41,279
Allowance for credit losses	(50)		(50)		(50)
Accounts receivable, net	$	16,774	$	21,861	$	41,229

Inventories

Inventories consisted of the following:

	As of
	March 31, 2024		December 31, 2023
	(in thousands)
Raw materials	$	24,066	$	17,550
Work in progress	35,248		35,193
Finished goods	15,062		12,796
Total inventories	$	74,376	$	65,539

Prepaid Expenses and Other Current Assets

Prepaid expenses and other current assets consisted of the following:

	As of
	March 31, 2024		December 31, 2023
	(in thousands)
Prepaid expenses	$	3,309	$	3,563
Other current assets	6,435		4,078
Total prepaid expenses and other current assets	$	9,744	$	7,641

9

Property and Equipment, net

Property and equipment, net consisted of the following:

	As of
	March 31, 2024		December 31, 2023
	(in thousands)
Lab and manufacturing equipment	$	85,422	$	80,772
Computer equipment	3,577		3,541
Furniture and fixtures	1,002		969
Construction in progress	3,429		5,978
Leasehold improvements	7,833		7,847
	101,263		99,107
Accumulated depreciation	(47,869)		(44,422)
Total property and equipment, net	$	53,394	$	54,685

Depreciation expense related to property and equipment was $3.6 million and $3.2 million for the three months ended March 31, 2024 and 2023, respectively.

Intangible Assets, net

Intangible assets, net consisted of the following:

	As of
	March 31, 2024						December 31, 2023
	(in thousands)
	Gross Assets		Accumulated Amortization		Net Assets		Gross Assets		Accumulated Amortization		Net Assets
Developed technology	$	96,700	$	(1,073)	$	95,627	$	96,700	$	(159)	$	96,541
Contract based royalty asset	$	5,900	$	(492)	$	5,408	$	5,900	$	(121)	$	5,779
Internal use software	$	9,434	$	(9,334)	$	100	$	9,434	$	(9,234)	$	200
Purchased software	15,227		(10,626)		4,601		15,110		(10,051)		5,059
Total amortizable intangible assets	$	127,261	$	(21,525)	$	105,736	$	127,144	$	(19,565)	$	107,579
In-process research and development	$	69,500	$	—	$	69,500	$	69,500	$	—	$	69,500
Total intangible assets	$	196,761	$	(21,525)	$	175,236	$	196,644	$	(19,565)	$	177,079

Amortization expense for intangible assets was $2.0 million and $0.6 million for the three months ended March 31, 2024 and 2023, respectively.

The estimated aggregate future amortization expense for intangible assets subject to amortization as of March 31, 2024 is summarized as below:

	(in thousands)
2024 (remainder)	$	12,030
2025	15,328
2026	14,986
2027	14,624
2028	12,912
2029 and beyond	35,856
	$	105,736

10

Accrued Expenses and Other Current Liabilities

Accrued expenses and other current liabilities consisted of the following:

	As of
	March 31, 2024		December 31, 2023
	(in thousands)
Accrued payroll and related benefits	$	5,782	$	6,358
Revenue reserves	2,585		2,954
Sales based earnout liability, current	16,772		19,733
Acquisition consideration payable, current	76,245		75,695
Deferred non-recurring engineering services	617		978
Short term lease liability	2,531		2,601
Accrued customer rebates	238		238
Other accrued expenses	3,837		4,147
Total accrued expenses and other current liabilities	$	108,607	$	112,704

The Company recorded reductions to research and development expenses related to non-recurring engineering service arrangements in the condensed consolidated statements of operations of $0.4 million and $1.2 million during the three months ended March 31, 2024 and 2023, respectively.

Other Non-current Liabilities

Other non-current liabilities consisted of the following:

	As of
	March 31, 2024		December 31, 2023
	(in thousands)
Sales based earnout liability, non-current	$	87,730	$	83,728
Acquisition consideration payable, non-current	34,500		33,086
Long term lease liability	4,786		5,423
Total other non-current liabilities	$	127,016	$	122,237

Note 5. Leases

The Company leases real estate property under operating leases. The Company leases office space in California, Michigan, Malaysia, Japan, Taiwan, the Netherlands, Finland, Ukraine, and India, all under non-cancellable operating leases with various expiration dates through May 2029.

The remaining lease terms vary from a few months to 6 years. For certain of its leases the Company has options to extend the lease term for periods varying from one to five years. These renewal options are not considered in the remaining lease term unless it is reasonably certain that the Company will exercise such options. The Company also has variable lease payments that are primarily comprised of common area maintenance and utility charges.

The table below presents the lease-related assets and liabilities recorded on the condensed consolidated balance sheets as of March 31, 2024 and December 31, 2023:

	As of
	March 31, 2024			December 31, 2023
	(in thousands)
Right-of-use assets	$	7,582		$	8,262
Lease liabilities included in accrued expenses and other current liabilities	2,531			2,601
Lease liabilities included in other non-current liabilities	4,786			5,423
Total operating lease liabilities	$	7,317		$	8,024
Weighted-average remaining lease term (years)	2.9			3.1
Weighted-average discount rate	4.5		%	4.5		%

11

The table below presents certain information related to the lease costs for operating leases for the three months ended March 31, 2024 and 2023:

	Three Months Ended March 31,
	2024		2023
	(in thousands)
Operating lease cost	$	748	$	759
Short-term lease cost	177		177
Variable lease cost	316		264
Total lease cost	$	1,241	$	1,200

Cash paid for operating lease liabilities was $0.8 million and $0.7 million for the three months ended March 31, 2024 and 2023, respectively.

Operating Lease Cash Flows

The table below reconciles the undiscounted cash flows for each of the first five years and total of the remaining years to the operating lease liabilities recorded on the condensed consolidated balance sheet as of March 31, 2024:

	(in thousands)
Remainder of 2024	$	2,256
2025	2,714
2026	2,183
2027	490
2028	134
2029 and beyond	45
Total minimum lease payments	7,822
Less: amount of lease payments representing interest	(505)
Present value of future minimum lease payments	7,317
Less: current obligations under leases	(2,531)
Long-term lease liabilities	$	4,786

Note 6. Stockholders’ Equity

At-The-Market offering

On February 27, 2024, the Company entered into a Sales Agreement ("Sales Agreement"), with Stifel, Nicolaus & Company, Incorporated ("Stifel"), under which the Company may offer and sell from time to time at its sole discretion, up to an aggregate of 1,200,000 shares of its common stock, par value $0.0001 per share, through Stifel acting as its sales agent. The Company used the net proceeds from the shares of common stock offered and sold to replenish funds expended to satisfy anticipated tax withholding and remittance obligations related to the net settlement upon vesting of restricted stock unit awards (“RSU”) granted to employees under the equity incentive plans. The Company has filed a prospectus supplement pursuant to the Sales Agreement for the offer and sale of up to an aggregate of 1,200,000 shares of its common stock. Subject to the terms and conditions of the Sales Agreement, Stifel will sell the common stock from time to time, based upon instructions from the Company. The Company agreed to pay Stifel a commission of up to 3% of the gross sales proceeds of any common stock sold through Stifel under the Sales Agreement.

During the three months ended March 31, 2024, the Company sold 32,500 shares of its common stock through Stifel under the Sales Agreement at a weighted average price of $92.57 per share resulting in net proceeds to the Company of $2.7 million, after deducting underwriting discounts and commissions of $0.1 million and offering costs of $0.2 million.

12

Equity Incentive Plans

The following table summarizes the RSU, performance based restricted stock units ("PRSU"), and multi-year performance restricted stock units ("MYPSU") activity for the three months ended March 31, 2024:

	RSU Number of Shares	Grant Date Fair Value per share		PRSU Number of Shares	Grant Date Fair Value per share		MYPSU Number of Shares	Grant Date Fair Value per share
Unvested at December 31, 2023	1,238,417	$	103.8	108,622	$	145.5	285,880	$	88.6
Granted	391,669	110.8		146,116	77.4		—	—
Vested	(229,644)	86.0		—	—		—	—
Forfeited	(13,170)	126.0		(55,532)	123.6		—	—
Unvested at March 31, 2024	1,387,272	$	108.5	199,206	$	101.5	285,880	$	88.6

In March 2024, the Compensation Committee approved target bonus amounts based on the achievement of revenue and individual performance goals for the fiscal year 2024 (the "2024 Goals"). The awards for the actual payouts are granted in the quarter following the end of the performance period. The target bonuses were granted based on a fixed dollar amount to be settled in RSUs on the vesting date and hence the awards have been classified as liability-based awards until settled. Such expense is included in the non-cash adjustment within stock-based compensation expense on the condensed consolidated cash flow statements. The liability of $0.1 million for 2024 Goals was recorded as accrued expenses and other current liabilities in the condensed consolidated balance sheet as of March 31, 2024.

In March 2024, the Compensation Committee of the Company approved PRSUs for the fiscal year 2024 with performance goals based on the achievement of relative total stockholder return with a three year performance period (the "2024 TSR PRSU Goals"). The grant-date fair value of each PRSU was determined using Monte Carlo simulation model. The assumptions used in the Monte Carlo simulation included expected volatility of 74.7%, risk free rate of 4.5%, no expected dividend yield and expected term of 2.8 years. The Company recognizes the expense related to the 2024 TSR PRSU Goals on a graded-vesting method over the requisite performance period. These grants are included in the PRSU awards granted in the table above.

The Company also operates a bonus plan for certain employees which are based on a fixed dollar amount to be settled in RSUs. These awards are categorized as liability-based awards until settled. Once settled, these awards are reflected as RSU granted in the above table. Such expense is included in the non-cash adjustment within stock-based compensation expense on the condensed consolidated cash flow statements. The liability of $0.9 million was recorded as accrued expenses and other current liabilities in the condensed consolidated balance sheet as of March 31, 2024.

13

Stock-Based Compensation

The following table presents the detail of stock-based compensation expense amounts included in the condensed consolidated statement of operations for each of the periods presented:

	Three Months Ended March 31,
	2024		2023
	(in thousands)
Equity based awards
Cost of revenue	$	175	$	628
Research and development	8,614		7,505
Selling, general and administrative	11,878		9,480
	$	20,667	$	17,613
Liability based awards - to be settled in equity
Cost of revenue	$	4	$	11
Research and development	563		526
Selling, general and administrative	469		386
	$	1,036	$	923
Total stock-based compensation - equity and liability based	$	21,703	$	18,536
Stock-based compensation expense recorded to additional paid-in capital
Equity based awards	$	20,667	$	17,613
Liability based awards - settled in equity	1,759		1,523
Stock compensation expense capitalized to inventory	$	468	$	—
Total stock-based compensation expense recorded to additional paid-in capital	$	22,894	$	19,136

The following table presents the unrecognized compensation costs and related weighted average period of recognition as of March 31, 2024:

	As of
	March 31, 2024
	Unrecognized Compensation Costs (in millions)		Weighted Average Period of Recognition (in years)
RSUs	$	137.1	2.0
PRSUs	$	16.0	1.5
MYPSUs	$	6.9	1.2
Liability-based awards	$	4.2	0.6

Note 7. Income Taxes

The quarterly provision for income taxes is based on applying the estimated annual effective tax rate to the year to date pre-tax income, plus any discrete items. The Company updates its estimate of its annual effective tax rate at the end of each quarterly period. The estimate takes into account annual forecasted income before income taxes, the geographic mix of income before income taxes and any significant permanent tax items.

14

The following table presents the provision for income taxes and the effective tax rates for the three months ended March 31, 2024 and 2023:

	Three Months Ended March 31,
	2024			2023
	(in thousands)
Income loss before income taxes	$	(28,691)		$	(16,420)
Income tax expense	(13)			(70)
Effective tax rate	0		%	0		%

The Company’s effective tax rate may vary from the U.S. federal statutory tax rate due to the change in the mix of earnings in tax jurisdictions with different statutory rates, benefits related to tax credits and the tax impact of non-deductible expenses, existence of full valuation allowance on its deferred tax assets, and other permanent differences between income before income taxes and taxable income.

A valuation allowance is established or maintained when, based on currently available information and other factors, it is more likely than not that all or a portion of the deferred tax assets will not be realized. The Company regularly assesses its valuation allowance against deferred tax assets on a jurisdiction by jurisdiction basis. The Company considers all available positive and negative evidence, including future reversals of temporary differences, projected future taxable income, tax planning strategies and recent financial results. Based on management’s assessment of the realizability of deferred tax assets, the Company continues to maintain a full valuation reserve on its deferred tax assets as of March 31, 2024.

The income tax provision was less than $0.1 million for both the three months ended March 31, 2024 and 2023. The effective tax rate was less than 1% for both the three months ended March 31, 2024 and 2023. The provision for income taxes is primarily related to the foreign subsidiaries’ local country obligations. The U.S. effective tax rate is less than 1% and is due to minimum state tax. There is no federal provision for income taxes as the Company has sufficient carryforward of net operating losses to offset any operating income earned since inception and has projected an operating loss in the current year.

As of March 31, 2024 and December 31, 2023, the Company had $2.3 million and $2.3 million, respectively, of total unrecognized tax benefits. If the Company is able to eventually recognize these uncertain tax positions, none of the unrecognized benefits would reduce the Company’s effective tax rate due to the full valuation allowance on the Company’s deferred tax assets.

The Company’s policy is to record interest and penalties related to unrecognized tax benefits as income tax expense. For the three months ended March 31, 2024 and 2023, the Company recorded immaterial amounts related to the accrual of interest and penalties.

Note 8. Segment, Geographic and Customer Information

The Company operates in one reportable segment related to the sale of Precision Timing solutions to the global electronics industry.

Revenue by geographic area is presented based upon the ship-to location of the customers who purchased the Company’s products which may be different from the geographic locations of the ultimate end customers. The following table sets forth revenue by country for countries with 10% or more of the Company’s revenue during any of the periods presented:

	Three Months Ended March 31,
	2024		2023
	(in thousands)
Taiwan	$	9,559	$	10,614
Hong Kong	10,452		6,308
United States	3,494		7,490
Singapore	2,210		3,782
Other	7,307		10,149
Total	$	33,022	$	38,343

15

The following table sets forth the Company’s total property and equipment attributable to operations by country as of the periods presented:

	As of
	March 31, 2024		December 31, 2023
	(in thousands)
United States	$	20,492	$	22,540
Malaysia	15,163		14,471
Taiwan	6,884		6,520
Other	10,855		11,154
	$	53,394	$	54,685

Note 9. Commitments and Contingencies

Legal Matters

From time to time, the Company may be a party to various litigation claims in the normal course of business. Legal fees and other costs associated with such actions are expensed as incurred. The Company assesses, in conjunction with legal counsel, the need to record a liability for litigation and contingencies. Accrual estimates are recorded when and if it is determined that such a liability for litigation and contingencies are both probable and reasonably estimable.

Indemnification

The Company is a party to a variety of agreements pursuant to which it may be obligated to indemnify other parties to such agreements with respect to certain matters. Typically, these obligations arise in the context of contracts that the Company has entered into, under which the Company customarily agrees to hold the other party harmless against losses arising from a breach of representations and covenants or terms and conditions related to such matters as the sale and/or delivery of its products, title to assets sold, certain intellectual property claims, defective products, and specified environmental matters. Further, the Company’s obligations under these agreements may be limited in terms of time, amount, or the scope of its responsibility and in some instances, the Company may have recourse against third-parties for certain payments made under these agreements. It is not possible to predict the maximum potential amount of future payments under these agreements due to the conditional nature of the Company’s obligations and the unique facts and circumstances involved in each particular agreement. Historically, the Company has had no material indemnification claims under these agreements.

Note 10. Related Party Transactions

MegaChips Corporation is the largest stockholder of the Company and held approximately 18.6% and 20.7% of the Company’s outstanding common stock as of March 31, 2024 and December 31, 2023, respectively.

There were no transactions with related parties during the three months ended March 31, 2024 and 2023.

Note 11. Net Loss Per Share

The following table summarizes the computation of basic and diluted net loss per share attributable to common stockholders of the Company:

	Three Months Ended March 31,
	2024		2023
	(in thousands, except per share data)
Net loss attributable to common stockholders	$	(28,704)	$	(16,490)
Weighted-average shares outstanding
Weighted average shares used to compute basic net loss per share	22,765		21,794
Dilutive effect of employee equity incentive plans	—		—
Weighted average shares used to compute diluted net loss per share	22,765		21,794
Net loss attributable to common stockholders per share, basic	$	(1.26)	$	(0.76)
Net loss attributable to common stockholders per share, diluted	$	(1.26)	$	(0.76)

16

Potential dilutive securities include dilutive common shares from share-based awards attributable to the assumed exercise of restricted stock unit awards using the treasury stock method. Under the treasury stock method, potential common shares outstanding are not included in the computation of diluted net income per share if their effect is anti-dilutive.

Anti-dilutive potential shares from share-based awards are excluded from the calculation of diluted earnings per share if either their exercise price exceeded the average market price during the period, or the share-based awards were determined to be anti-dilutive based on applying the treasury stock method. During the three months ended March 31, 2024 and 2023, the Company had 932,535 and 415,017 potential shares from share-based awards that are anti-dilutive, respectively.

17

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

The following discussion should be read in conjunction with the Condensed Consolidated Financial Statements and the related notes that appear elsewhere in this document.

The information in this Quarterly Report on Form 10-Q contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended (the “Securities Act”), and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), which are subject to the “safe harbor” created by those sections. We may, in some cases, use words such as “anticipate,” “believe,” “could,” “estimate,” “expect,” “intend,” “may,” “objective,” “plan,” “potential,” “predict,” “project,” “should,” “will,” “would,” or the negative of those terms, and similar expressions that convey uncertainty of future events or outcomes to identify these forward-looking statements. Any statements contained herein that are not statements of historical facts may be deemed to be forward-looking statements. Forward-looking statements in this report include, but are not limited to, statements about:

•our plans to focus on oscillators, clock ICs, resonators and timing synchronization solutions and to aggressively expand our presence in these markets;

•our expectations regarding our ability to address market and customer demands and to timely develop new or enhanced solutions to meet those demands;

•anticipated trends, challenges and growth in our business and the markets in which we operate, including pricing expectations;

•our expectations regarding our revenue, average selling prices, gross margin, and expenses;

•our expectations regarding the effects of macroeconomic events in 2024;

•our expectations regarding dependence on a limited number of customers and end customers;

•our customer relationships and our ability to retain and expand our customer relationships and to achieve design wins;

•our expectations regarding the success, cost, and timing of new products;

•the size and growth potential of the markets for our solutions, and our ability to serve and expand our presence in those markets;

•our plans to expand sales and marketing efforts through increased collaboration with our distributors and contracted sales representatives, and our plans to grow direct online sales through our self-service online store;

•our expectations to identify new customers and deliver differentiated Precision Timing solutions to them through digital marketing strategies;

•our goal to become the leading provider of Precision Timing solutions for advanced and challenging applications;

•our positioning of being designed into current systems as well as future products;

•our belief that our advanced packaging designs can enable the smallest footprints in the industry;

•our expectations regarding competition in our existing and future markets;

•our expectations of the success of our acquisitions and how we integrate and generate revenue;

•the impact a pandemic, epidemic, or other outbreak of disease may in the future have on our business, results of operations and financial condition, as well as the businesses of our suppliers and customers;

•our expectations regarding regulatory developments in the United States and foreign countries;

•our expectations regarding the performance of, and our relationships with, our third-party suppliers and manufacturers;

18

•our expectations regarding our and our customers’ ability to respond successfully to technological or industry developments;

•our expectations regarding our ability to attract and retain key personnel;

•our expectations regarding intellectual property and related litigation;

•our belief as to the sufficiency of our existing cash and cash equivalents and short-term investments funds to meet our cash needs for at least the next 12 months and our future capital requirements over the longer term;

•the adequacy and availability of our leased facilities;

•the accuracy of our estimates regarding capital requirements and needs for additional financing.

These forward-looking statements reflect our management’s beliefs and views with respect to future events and are based on estimates and assumptions as of the date of this report and are subject to risks and uncertainties. We discuss many of these risks in greater detail in Part II, Item 1A "Risk Factors" of this report. Moreover, we operate in a very competitive and rapidly changing environment. New risks emerge from time to time. It is not possible for our management to predict all risks, nor can we assess the impact of all factors on our business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward-looking statements we may make. Given these uncertainties, you should not place undue reliance on these forward-looking statements. We qualify all of the forward-looking statements in this report by these cautionary statements

You should not rely upon forward-looking statements as predictions of future events. Although we believe that the expectations reflected in the forward-looking statements are reasonable, we cannot guarantee that the future results, levels of activity, performance, or events and circumstances reflected in the forward-looking statements will be achieved or occur. Moreover, neither we nor any other person assumes responsibility for the accuracy and completeness of the forward-looking statements. We undertake no obligation to update publicly any forward-looking statements for any reason after the date of this report to conform these statements to actual results or to changes in our expectations, except as required by law.

In addition, statements that “we believe” and similar statements reflect our beliefs and opinions on the relevant subject. These statements are based upon information available to us as of the date of this report, and while we believe such information forms a reasonable basis for such statements, such information may be limited or incomplete, and our statements should not be read to indicate that we have conducted an exhaustive inquiry into, or review of, all potentially available relevant information. These statements are inherently uncertain and investors are cautioned not to unduly rely upon these statements.

Overview

The ability to accurately measure and reference time has been essential to humankind’s greatest inventions and technological advances. Timing technology has continued to evolve over centuries, forming a critical aspect of broader technological evolution. Timing is the heartbeat of digital electronic systems, ensuring that the system runs smoothly and reliably by providing and distributing clock signals to various critical components such as central processing units, communication and interface ICs, and radio frequency components. As electronics evolve to deliver higher performance levels, even in increasingly challenging environments, while also being more complex and size-constrained, we believe they will require more sophisticated semiconductor-based timing solutions that cannot be developed in legacy quartz crystal-based technologies. Precision timing ("Precision Timing"), fills this need with the performance, power, size, and cost that is required by these new applications.

We are a leading provider of Precision Timing solutions to the global electronics industry. Our Precision Timing solutions are the heartbeat of our customers’ electronic systems, providing the timing functionality that is needed for electronics to operate reliably and correctly. We provide Precision Timing solutions that are differentiated by high performance, high resilience, and high reliability, along with programmability, small size, and low power consumption. Our products have been designed into over 300 applications across our target markets, including communications, datacenter and enterprise, automotive, industrial, aerospace, mobile, Internet of Things (“IoT”), and consumer. Our current solutions include various types of oscillators, as well as clock integrated circuits (“ICs”) and resonators.

Our all-silicon solutions are based on three fundamental areas of expertise: micro-electro-mechanical systems (“MEMS”), analog mixed-signal design capabilities, and advanced system-level integration expertise. These areas of expertise enable us to design silicon MEMS resonators, analog circuits, as well as systems and packaging, and put these all together to deliver a system-level solution that solves customers’ complex timing problems. In this aspect, we believe we are different

19

than quartz-based providers, who typically have expertise in designing and manufacturing resonator components, but usually outsource the analog and packaging. We also have a deep understanding of mechanical, electrical, and thermal properties of materials, which is a key requirement for developing our proprietary MEMS processes. To maximize MEMS first-silicon success, we have also developed our own MEMS simulation tools. We are also different in that our MEMS resonators are made using semiconductor technology which has significant benefits in features, performance, manufacturing, and cost, while the quartz suppliers use quartz crystal material. Compared to traditional clock IC suppliers, we are different in that we design the resonator in-house and can integrate it into the clock IC package. Our analog/mixed-signal die are developed using industry-standard processes and deliver high levels of performance using programmable phase-locked loops ("PLLs"), temperature sensors, regulators, data converters, drivers and other building blocks. Unlike most clock IC vendors, we do not rely on quartz vendors to provide the quartz resonator clock reference that is required for their clock ICs to function. Our expertise creates supply chain advantages for us and most importantly, enables us to design and build complete timing systems that result in performance advantages, providing a complete solution to the customer.

Our Precision Timing solutions are designed to be resilient to harsh environmental stressors. For the communications, datacenter and enterprise market, our products provide high performance and resilience in dense, less-controlled environments that experience extreme conditions. The resilience of our products becomes an increasing advantage as equipment is placed in dense, harsh environments and moves closer to the customer with the rollout of 5G, the rapid expansion in cloudification, and deployment of hyperscale datacenters. For the automotive market, our solutions can be utilized in automotive electronics, including advanced driver assistance systems (“ADAS”) for self-driving cars, which require increased timing accuracy. For the industrial market, our products offer programmability and high reliability for the diverse operating conditions of industrial equipment, including high temperatures, mechanical shock, and vibration. For the aerospace market, our solutions provide lower acceleration sensitivity for end products that operate in rugged conditions. For the mobile, IoT and consumer market, our timing solutions have the advantage of offering high performance at optimal power consumption and size, as our customers fit more functionality into smaller devices.

We believe that the total timing market is approximately $10 billion in size. Since our founding, we have focused on transforming this market with compelling solutions that solve difficult timing problems. Historically, our revenue has been substantially delivered from sales of oscillator systems across our target end markets. Since our initial public offering ("IPO") in November 2019, we’ve grown from 60 to 150 unique products and the price of our highest-value oscillator has grown manyfold. In addition to oscillators, we have expanded our product portfolio to include clock IC and timing synchronization solutions.

In December 2023, we closed the acquisition of certain assets and the exclusive license to certain intellectual property from Aura Semiconductor Pvt. Ltd. and certain of its affiliated entities (together, "Aura") relating to Aura's timing business and clock products, subject to certain covenants and restrictions. With this acquisition, we bring our expertise to the category of clocks, adding 20 best-in-class clocks at the close of the acquisition, and approximately an additional 20 products, starting at the second half of 2024 and through 2025. With the addition of all four categories of clock products including network synchronizers, jitter cleaners, clock generators, and buffers, we now offer a comprehensive portfolio of timing solutions. By pairing the new SiTime clocking products with our MEMS oscillators and/or our resonators, we expect to be able to offer a more complete clock tree that is simpler to design with higher performance, and more resilient to environmental stressors with better reliability. SiTime is now a key provider of all differentiated products in timing – oscillators, clocks, and resonators combined with depth in engineering expertise in Precision Timing solutions.

We sell our products primarily through distributors, who in turn sell to our end customers. We also sell products directly to some of our end customers. We leverage our global network of distributors to address the broad set of end markets we serve. For our largest accounts, dedicated sales personnel work with the end customer to ensure that our solutions fully address the end customer’s timing needs. Our smaller customers can select the optimum timing solution for their needs by working directly with our sales personnel or distributors or by shopping on our online store, SiTimeDirect™.

We operate a fabless business model, where we outsource manufacturing to semiconductor industry suppliers, which allows us to focus on, and excel in, the design, marketing, and sales of our products. This model also allows us to operate with lower capital expenditure investment than other semiconductor companies that own fabs. A fabless infrastructure gives us production flexibility and the ability to scale capacity up and down quickly to meet demand. Our programmable architecture also plays a key role in ensuring optimal production flexibility, as it allows us to offer shorter lead times and the ability to meet custom requirements more easily.

Since our IPO in November 2019, while our revenue has grown, gross margins have improved, and new opportunities for growth for our business have emerged, adverse macroeconomic events including geopolitical tensions and conflicts have substantially increased. In 2020 and 2021, there were a number of industry-wide supply constraints affecting the supply of analog circuits manufactured by certain foundries, including Taiwan Semiconductor Manufacturing Company ("TSMC"), and affecting outsourced semiconductor assembly and test providers. We believe that the effects of the industry-wide

20

supply constraints on other timing device suppliers contributed in part to our revenue and gross margin growth in 2021 and the first half of 2022. In 2022 and 2023 macroeconomic events such as rising inflation, fear of recession, equity market volatility, geopolitical tensions, war, decreased consumer spending, lower demand for electronic products following a period of strong demand during the COVID-19 pandemic, supply chain disruptions, and the COVID-19 pandemic measures implemented in China, harmed sales of our products and results of operations. We believe that some of our customers built up inventory of our products in 2022 to overcome the industry-wide supply constraints that occurred in the previous periods and that the macroeconomic events in the second half of 2022 and through 2023 led to reduced demand for our customers' products, which led to an inventory buildup at some of our customers and their affiliates, partners and contract manufacturers, which has adversely affected sales of our products. We believe that while this inventory buildup has reduced through the second half of 2023 and in 2024, any further increase could negatively impact the sales of our products and could result in decreases in our sales and margins, and could materially harm our results of operations. The future effects of macroeconomic events on our business and results of operations, including inventory levels at our customer and their affiliates, partners, and contract manufacturers as well as demand for our products, are uncertain and difficult to predict. For additional discussion please see Part II, Item 1A "Risk Factors" of this report, especially the risk factor titled “Global macroeconomic conditions have harmed and may continue to harm our business” and “Our revenue and operating results may fluctuate from period to period, which could cause our stock price to fluctuate.”

We have employees in Finland, France, Germany, Japan, Korea, Malaysia, the Netherlands, Taiwan, Ukraine, India, and the U.S.

Results of Operations

Revenue

We derive revenue primarily from sales of Precision Timing solutions to distributors who in turn sell to our end customers. We also sell products directly to some of our end customers. Our sales are made pursuant to standard purchase orders which may be cancelled, reduced, or rescheduled, with little or no notice. We recognize product revenue upon shipment when we satisfy our performance obligations as evidenced by the transfer of control of our products to customers. We measure revenue based on the amount of consideration we expect to be entitled to in exchange for products.

	Three Months Ended March 31,				Change
	2024		2023		$		%
	(in thousands except percentage)
Revenue	$	33,022	$	38,343	$	(5,321)	(14	%)

Revenue decreased by $5.3 million, or 14%, for the three months ended March 31, 2024 compared to the same period in the prior year. The decrease was primarily related to a decrease in average selling prices ("ASPs") of our products primarily due to change in mix of the products we shipped, partially offset by an increase in sales volume. Lower sales volume in the prior year was driven by excess inventory buildup at many of our customers, including our largest end customer, distributors and their affiliates, partners, and contract manufacturers, and lower demand for our products due to macroeconomic conditions.

Sales attributable to our largest end customer through multiple distributors accounted for 19% and 3% of our revenue for the three months ended March 31, 2024 and 2023, respectively. Our end customers predominantly purchase our products from distributors. Our top three customers by revenue, which are distributors, together accounted for approximately 55% and 45% of our revenue for the three months ended March 31, 2024 and 2023, respectively. Revenue attributable to our largest ten end customers accounted for 52% and 43% for the three months ended March 31, 2024 and 2023, respectively.

Cost of Revenue, Gross Profit, and Gross Margin

Cost of revenue consists of wafers acquired from third-party foundries, assembly, packaging, and test cost of our products paid to third-party contract manufacturers, amortization of acquired intangibles and personnel and other costs associated with our manufacturing operations. Cost of revenue also includes depreciation of production equipment, inventory write-

21

downs, amortization of internally developed software, shipping and handling costs, and allocation of overhead and facility costs. We also include credits for rebates received from foundries to cost of revenue.

	Three Months Ended March 31,						Change
	2024			2023			$		%
	(in thousands except percentage)
Cost of Revenue	$	15,361		$	15,302		$	59	0.4	%
Gross Profit	$	17,661		$	23,041		$	(5,380)	(23	%)
Gross Margin	53		%	60		%

Gross profit decreased by $5.4 million in the three months ended March 31, 2024 compared to the same period in the prior year. Gross profit decreased $4.5 million mainly from lower revenue and $1.2 million due to higher stock-based compensation expense. This decrease was partially offset by lower other manufacturing and overhead costs of $0.3 million.

Gross margin was lower by 7% in the three months ended March 31, 2024 compared to the same period in the prior year. Of the decrease, 5.2% was mainly due to lower sales causing an unfavorable absorption of our manufacturing overhead costs and the additional 1.4% decline was contributed by lower ASP for the quarter due to change in mix of products shipped.

Gross margin may fluctuate from time to time due to a variety of factors. For additional discussion please see Part II, Item 1A "Risk Factors" of this report, especially the risk factor titled “Our gross margins may fluctuate due to a variety of factors, which could negatively impact our results of operations and our financial condition.”

Operating Expenses

Our operating expenses consist of research and development, sales and marketing, general and administrative expenses, and acquisition related costs. Personnel costs are the most significant component of our operating expenses and consist of salaries, benefits, bonuses, stock-based compensation, and commissions. Our operating expenses also include consulting costs, allocated costs of facilities, information technology and depreciation.

	Three Months Ended March 31,				Change
	2024		2023		$		%
	(in thousands except percentage)
Operating Expenses:
Research and development	$	25,544	$	24,457	$	1,087	4	%
Selling, general and administrative	23,913		20,733		3,180		15	%
Acquisition related costs	3,242		—		3,242		n/a
Total operating expenses	$	52,699	$	45,190	$	7,509	17	%

Research and Development

Our research and development efforts are focused on the design and development of Precision Timing solutions. Our research and development expense consists primarily of personnel costs, which include stock-based compensation, pre-production engineering mask costs, software license and intellectual property expenses, design tools and prototype-related expenses, facility costs, supplies, professional and consulting fees, and allocated overhead costs, which may be offset by non-recurring engineering contra-expenses recorded in certain periods. There is no assurance that we will have non-recurring engineering contra-expense from period to period. We expense research and development costs as incurred. We believe that continued investment in our products and services is important for our future growth and acquisition of new customers and, as a result, we expect our research and development expenses to continue to increase in absolute dollars. However, we expect our research and development expenses to fluctuate as a percentage of revenue from period to period depending on the timing of these expenses.

Research and development expense increased by $1.1 million, or 4%, for the three months ended March 31, 2024 compared to the same period in the prior year, primarily due to a decrease in non-recurring engineering contra-expense recognized of $0.9 million, an increase in depreciation and amortization of lab equipment and licenses of $0.2 million, and an increase in stock-based compensation expense of $1.1 million, offset by lower engineering spend towards ongoing new product development of $0.6 million and lower other personnel costs of $0.5 million.

22

There is no guarantee we will enter into a non-recurring engineering arrangement or recognize such contra-expense in any future period.

Sales, General and Administrative

Sales, general and administrative expense consists of personnel costs, including stock-based compensation, professional and consulting fees, accounting and audit fees, legal costs, field application engineering support, travel costs, advertising expenses and allocated overhead costs. We expect sales, general and administrative expenses to continue to increase in absolute dollars as we increase our personnel and grow our operations, although it may fluctuate as a percentage of revenue from period to period depending on the timing of these expenses.

Selling, general and administrative expense increased by $3.2 million, or 15%, for the three months ended March 31, 2024 compared to the same period in the prior year, primarily due to higher stock-based compensation expense of $2.5 million, higher other personnel costs of $0.5 million, and higher advertising costs of $0.4 million, partially offset by reduction in sales commission payouts by $0.3 million due to lower sales, and lower consulting fees of $0.3 million.

Acquisition related costs

Acquisition related costs include legal, regulatory, consulting, and other costs incurred towards the acquisition closed during the year ended December 31, 2023 and changes in the fair value of the sales based earnout liability and acquisition consideration payable. We expect these costs to be dependent on the occurrence of future acquisitions and to be non-recurring. The acquisition related costs incurred for the three months ended March 31, 2024 were related to the completion of the Aura transaction. We may incur incremental costs in 2024 and beyond related to the Aura transaction.

Interest Income

Interest income consists primarily of interest income on short term investments.

	Three Months Ended March 31,				Change
	2024		2023		$		%
	(in thousands except percentage)
Interest Income	$	6,560	$	5,629	$	931	17	%

Interest income increased by $0.9 million for the three months ended March 31, 2024, compared to the same period in the prior year due to an increase in interest rates in the current year.

Other Income (Expense), net

Other expense, net consists primarily of foreign exchange gains and losses.

	Three Months Ended March 31,				Change
	2024		2023		$		%
	(in thousands except percentage)
Other income (expense), net	$	(213)	$	100	$	(313)	(314	%)

Other income (expense), net, increased by $0.3 million or 314% for the three months ended March 31, 2024, compared to the same period in the prior year primarily due to an increase in net unrealized loss on foreign exchange rates due to increased activities in our foreign subsidiaries and unfavorable exchange rate fluctuations.

Income Tax Expense

Income tax expense consists primarily of state income taxes and income taxes in certain foreign jurisdictions in which we conduct business. We have a full valuation allowance for deferred tax assets as the realization of the full amount of our deferred tax asset is uncertain, including NOL carryforwards, and tax credits related primarily to research and

23

development. We expect to maintain this full valuation allowance until realization of the deferred tax assets becomes more likely than not.

	Three Months Ended March 31,				Change
	2024		2023		$		%
	(in thousands except percentage)
Income tax expense	$	(13)	$	(70)	$	57	(81	%)

Liquidity and Capital Resources

As of March 31, 2024 and December 31, 2023, we had cash and cash equivalents of $96.3 million and $9.5 million, respectively. As of March 31, 2024 and December 31, 2023 we also held $421.0 million and $518.7 million of short-term investments, respectively in held-to-maturity securities which consisted of treasury bills. Our principal use of cash is to fund our operations, to support growth through capital investments, and to acquire complementary businesses, products, services or technologies in the future.

In February 2024, we entered into a Sales Agreement ("Sales Agreement") with Stifel, Nicolaus & Company, Incorporated ("Stifel"), under which we may offer and sell from time to time at our sole discretion, up to an aggregate of 1,200,000 shares of our common stock, par value $0.0001 per share, through Stifel as our sales agent. During the three months ended March 31, 2024, we sold 32,500 shares of our common stock under the Sales Agreement at a weighted average price of $92.57 per share resulting in net proceeds to us of $2.7 million, after deducting underwriting discounts and commissions and offering costs. The Company used the net proceeds from the shares of common stock offered and sold to replenish funds expended to satisfy anticipated tax withholding and remittance obligations related to the net settlement upon vesting of restricted stock unit awards (“RSU”) granted to employees under the equity incentive plans.

Our purchase obligations primarily include design and simulation licenses and non-cancelable purchase commitments from agreements with our contract manufacturers as well as a multi-year purchase agreement with commitment to purchase minimum quantities of MEMS wafers and research and development, tooling and sample cost under the agreement. For information about our contractual obligations refer to "Note 5 - Lease" of the Notes to Condensed Consolidated Financial Statements for the period ending March 31, 2024 and "Note 6 - Commitments and Contingencies" of the Notes to the Consolidated Financial Statements filed in the Company's Annual Report on Form 10-K for the year ended December 31, 2023.

We expect to continue our investing activities to support growth, primarily through the purchase of property and equipment, intellectual property licenses, and capitalized software, to support research and development, sales and marketing, product support, and administrative staff.

We believe that our existing cash and cash equivalents and our short-term investments will be sufficient to meet our cash needs for at least the next 12 months. Over the longer term, our future capital requirements will depend on many factors, including our growth rate, the timing and extent of our sales and marketing and research and development expenditures, costs to acquire or invest in complementary businesses and technologies, payment obligations associated with our completed acquisitions based on achievement of certain milestones, and the continuing market acceptance of our solutions. In the event that we need to borrow funds or issue additional equity, we cannot provide any assurance that any such additional financing will be available on terms acceptable to us, if at all. If we are unable to raise additional capital when we need it, it would harm our business, results of operations and financial condition.

The table below summarizes our cash flows for the periods indicated:

	Three Months Ended March 31,
	2024		2023
	(in thousands)
Net cash provided by operating activities	$	1,729	$	11,949
Net cash provided by (used in) investing activities	91,110		(10,821)
Net cash provided by (used in) financing activities	(6,032)		2,534
Net increase in cash and cash equivalents	$	86,807	$	3,662

Operating Activities

In the three months ended March 31, 2024, net cash provided by operating activities of $1.7 million was primarily due to a net loss of $28.7 million and a change in operating assets and liabilities of $3.9 million, offset by non-cash expenses of

24

$34.3 million. Non-cash expenses were mainly related to depreciation and amortization, stock-based compensation expense, change in fair value of sales based earnout liability and acquisition consideration payable, and net change in unrealized interest on held to maturity investments. The changes in operating assets and liabilities resulted in cash used primarily due to an increase in inventories as we built our wafer inventory levels, and an increase in prepaid expenses and other assets due to timing of payments, partially offset by lower accounts receivable due to timing of payments and lower revenue, and higher accounts payable and accrued expenses primarily due to timing of accrued payroll and related benefit payments.

Investing Activities

Our investing activities consist primarily of purchase and maturities of short-term investments and capital expenditures for property and equipment purchases. Our short-term investments were primarily in treasury bills to earn interest. Our capital expenditures for property and equipment have primarily been for general business purposes, including machinery and equipment, leasehold improvements, acquired software, computer equipment used internally, and production masks to manufacture our products.

In the three months ended March 31, 2024, net cash provided by investing activities was $91.1 million. We paid $294.4 million to purchase short-term investments in held-to-maturity securities. We paid $3.0 million largely to purchase test and other manufacturing equipment and intangibles to support the general business operations. All such payments were offset by $388.5 million proceeds from the maturity of held to maturity investments.

Financing Activities

Our financing activities have primarily consisted of proceeds from issuance of shares and payments of withholding taxes on restricted stock units. During the three months ended March 31, 2024, we sold 32,500 shares of our common stock under the Sales Agreement resulting in net proceeds to us of $2.7 million, after deducting underwriting discounts and commissions of $0.1 million and offering costs of $0.2 million. The net proceeds from the Sales Agreement were offset by tax withholdings paid on behalf of employees for net share settlement of $8.7 million.

Off-Balance Sheet Arrangements

During the periods presented, we did not have any relationships with unconsolidated entities or financial partnerships, such as entities often referred to as structured finance or special purpose entities, which would have been established for the purpose of facilitating off-balance sheet arrangements or other contractually narrow or limited purposes.

Critical Accounting Estimates

Our condensed consolidated financial statements have been prepared in accordance with GAAP. The preparation of these financial statements and accompanying disclosures requires us to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosures of contingent assets and liabilities in the consolidated financial statements and the accompanying notes. The Securities and Exchange Commission (the "SEC"), has defined a company’s critical accounting estimates as estimates that are most important to the portrayal of a company’s financial condition and results of operations, and which require a company to make its most difficult and subjective judgments, often as a result of the need to make estimates of matters that are inherently uncertain. Based on this definition, we have identified our most critical accounting estimates to be as follows: (1) revenue recognition; (2) business combinations; and (3) inventory. Although we believe that our estimates, assumptions, and judgments are reasonable, they are based upon information not presently available. Actual results may differ significantly from these estimates if the assumptions, judgments, and conditions upon which they are based turn out to be inaccurate. Management believes that there have been no significant changes to the items that we disclosed as our critical accounting estimates in Management’s Discussion and Analysis of Financial Condition and Results of Operations, in our Annual Report on Form 10-K for the year ended December 31, 2023 filed with the SEC on February 26, 2024.

Item 3. Quantitative and Qualitative Disclosures About Market Risk.

Foreign Currency Risk

Substantially all of our revenue is denominated in U.S. dollars. Our expenses are generally denominated in the currencies in which our operations are located, which is primarily in the United States and, to a lesser extent, in Finland, France, Japan, Germany, Korea, Malaysia, the Netherlands, Taiwan, Ukraine, and India. Our results of operations and cash flows are, therefore, subject to fluctuations due to changes in foreign currency exchange rates and may be adversely affected in the future due to changes in foreign exchange rates. The effect of a hypothetical 10% change in foreign currency exchanges rates applicable to our business would not have a material impact on our historical consolidated financial statements. We do not currently have a hedging program with respect to foreign currency exchange risk.

25

Interest Rate Risk

We had cash and cash equivalents of $96.3 million and $9.5 million as of March 31, 2024 and December 31, 2023, respectively, consisting of bank deposits, money market funds and treasury bills. We also had short-term investments in held-to-maturity securities of $421.0 million and $518.7 million consisting of treasury bills as of March 31, 2024 and December 31, 2023. Such interest-earning instruments carry a degree of interest rate risk. During the three months ended March 31, 2024 we have generated $6.6 million in interest income due to higher investment balance and rising interest rates.

We do not enter into investments for trading or speculative purposes and have not used any derivative financial instruments to manage our interest rate risk exposure. As of March 31, 2024, a hypothetical 10% increase or decrease in market interest rates would change the fair value and related interest income on our interest-earning instruments of $421.0 million, by an increase or decrease of approximately $0.7 million for the three months ended March 31, 2024.

Item 4. Controls and Procedures.

Evaluation of Disclosure Controls and Procedures

We maintain “disclosure controls and procedures,” as such term is defined in Rules 13a-15(e) and 15d – 15(e) under the Exchange Act, that are designed to provide reasonable assurance that information required to be disclosed by us in reports we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms and that such information is accumulated and communicated to our management, including our Chief Executive Officer (principal executive officer) and Chief Financial Officer (principal financial officer), as appropriate, to allow for timely decisions regarding required disclosure.

Our management, including our principal executive and chief executive officer, does not expect that our disclosure controls and procedures or our internal controls, will prevent all error and all fraud. A control system, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within SiTime have been detected.

Based on their evaluation as of the end of the period covered by this Quarterly Report on Form 10-Q, our Chief Executive Officer and Chief Financial Officer have concluded that, as of such date, our disclosure controls and procedures were effective.

Remediation of Previously Disclosed Material Weakness

A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of the Company's annual or interim financial statements will not be prevented or detected on a timely basis. Management previously identified a material weakness in our internal control over financial reporting due to a deficiency in our review control over the classification of cash flows from investments within the statements of cash flows in accordance with applicable accounting guidance for the periods ended March 31, 2023, June 30, 2023, and September 30, 2023.

Beginning the fourth fiscal quarter of 2023, we implemented changes to our processes to improve our internal control over financial reporting to remediate the control deficiency that gave rise to the material weakness.

Specifically, we implemented the following changes and improvements:

•Implemented a cash flow review checklist to assist in appropriate classification of items within the cash flow statements; and

•Strengthened the internal review process to ensure additional layer of review of the quarterly cash flow statements;

Upon completion of our testing of the design and operating effectiveness of these new control procedures, management concluded that the previously-identified material weakness was remediated as of March 31, 2024.

Changes in Internal Control Over Financial Reporting

Except for the remediation of material weakness discussed before, there have been no changes in our internal control over financial reporting during the three months ended March 31, 2024 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

26

PART II—OTHER INFORMATION

Item 1. Legal Proceedings.

The information required by this item is included in Note 9 of the Notes to Condensed Consolidated Financial Statements in Part I, Item 1 of this Quarterly Report on Form 10-Q and is incorporated herein by reference.

Item 1A. Risk Factors.

Risks Related to Our Business and Our Industry

Global macroeconomic conditions have harmed and may continue to harm our business.

We are a global company and therefore our business, results of operations, and financial condition are impacted by global macroeconomic conditions. Macroeconomic events such as rising inflation, recession, equity market volatility, geopolitical tensions, war, declines in income or asset values, decreased spending, changes to fuel and other energy costs, public health crises, supply chain disruptions, trade restrictions and sanctions, and global banking concerns have caused economic volatility, which has and may continue to harm our business, financial condition, and results of operations, and may cause an extended downturn in the worldwide economy, which would further harm our business, financial condition and results of operations. Economic volatility and adverse economic conditions have affected and may continue to affect the demand for our products and our customers’ products. Reduced demand for our customers’ products has led to a buildup of inventory at many of our customers, including distributors, and their affiliates, partners, and contract manufacturers, which has and may continue to adversely affect demand for our products. Reduced demand for our products could result in significant decreases in our sales and margins, and could materially harm our results of operations. The future effects of macroeconomic events on our business and results of operations, including inventory levels at our customers and their affiliates, partners, and contract manufacturers as well as demand for our products, are uncertain and difficult to predict.

A deterioration in credit markets as a result of macroeconomic events could also limit our ability to obtain external financing to fund our operations and capital expenditures. We may experience losses on our holdings of cash and investments due to failures of financial institutions and other parties. Further, adverse economic conditions may also result in a higher rate of losses on our accounts receivable due to credit defaults. As a result, global macroeconomic conditions have had and may continue to have a material adverse effect on our business, results of operations, and financial condition.

We are subject to the cyclical nature of the semiconductor industry.

The semiconductor industry is highly cyclical and is characterized by constant and rapid technological change, rapid product obsolescence, price erosion, evolving standards, short product life cycles, and wide fluctuations in product supply and demand. From time to time, these factors, together with changes in macroeconomic conditions, can cause significant upturns and downturns in the semiconductor industry, and in our business. Downturns in the semiconductor industry have been characterized by diminished product demand, production overcapacity, high inventory levels for us and our customers, and erosion of average selling prices. For example, in 2023 we experienced, and we may in the future experience, customer inventory adjustments that may adversely affect our results of operations. Any downturns in the semiconductor industry could harm our business, financial condition, and results of operations. Any significant upturn in the semiconductor industry could result in increased competition for access to third-party foundry and assembly capacity. We are dependent on the availability of this capacity to manufacture and assemble our products and we can provide no assurance that adequate capacity will be available to us in the future. We cannot predict the duration or timing of any downturn or upturn in the semiconductor industry.

We have historically depended on a limited number of customers for a significant portion of our revenue. If we are unable to expand or further diversify our customer base, our business, financial condition, and results of operations could suffer, and the loss of, or a significant reduction in orders from our customers, including a large customer or end customer, could significantly reduce our revenue and adversely impact our operating results.

Historically we have derived a significant portion of our revenue from a limited number of customers. We sell our products primarily through distributors, who in turn sell to our end customers. We also sell directly to our end customers. Our top three distributors by revenue together accounted for approximately 55% and 45% of our revenue for the three months ended March 31, 2024 and 2023, respectively. Based on our shipment information, we believe that revenue attributable to our ten largest end customers accounted for 52% and 43% of our revenue for the three months ended March 31, 2024 and 2023, respectively. Sales attributable to Apple Inc., our largest end customer accounted for approximately 19% and 3% of our revenue for the three months ended March 31, 2024 and 2023 respectively. We anticipate revenue attributable to this customer will fluctuate from period to period. Although we sell our products to this customer through distributors on a purchase order basis, including Pernas Electronics Co., Ltd. (“Pernas”), Arrow Electronics, Inc. (“Arrow”), and Quantek

27

Technology Corporation (“Quantek”), we have a development and supply agreement, which provides a general framework for certain transactions with Apple. This agreement continues until either party terminates for material breach. Under this agreement, we have agreed to develop and deliver new products to this end customer at its request, provided it also meets our business purposes, and have agreed to indemnify it for intellectual property infringement or any injury or damages caused by our products. This end customer does not have any minimum or binding purchase obligations to us under this agreement and could elect to discontinue making purchases from us with little or no notice. We expect the composition of our largest end customers to vary from period to period, and that revenue attributable to our largest ten end customers in any given period may decline over time. Our relationships with existing customers may deter potential customers who compete with these customers from buying our Precision Timing solutions.

We believe our operating results for the foreseeable future will continue to depend to a significant extent on sales attributable to a limited number of customers and end customers. If we are unable to expand or further diversify our customer base, it could harm our business, financial condition, and results of operations.

If our end customers were to choose to work with other manufacturers or our relationships with our customers are disrupted for any reason, it could have a significant negative impact on our business. Any reduction in sales attributable to our larger customers and end customers, including our largest end customer, would have a significant and disproportionate impact on our business, financial condition, and results of operations. Geopolitical tensions are leading to an increasing trend of customers seeking domestically produced products or reducing the dependence upon or use of products from certain countries, which could limit our ability to make sales to these customers.

Our end customers, or the distributors through which we sell to these customers, may choose to use products in addition to ours, use a different product altogether, or develop an in-house solution. In addition, the inability of our customers or their contract manufacturers to obtain sufficient supplies of third-party components used with our products could result in a decline in the demand of our products and a loss of sales. Any of these events could significantly harm our business, financial condition, and results of operations. Further, if our distributors’ relationships with our end customers, including our larger end customers, are disrupted for inability to deliver sufficient products or for any other reason, it could have a significant negative impact on our business, financial condition, and results of operations.

Because we do not typically have long-term purchase commitments with our customers, orders may be cancelled, reduced, or rescheduled with little or no notice, which in turn exposes us to inventory risk, and may cause our business and results of operations to suffer.

We sell our products primarily through distributors, usually with no long-term or minimum purchase commitments from them or their end customers. Substantially all of our sales to date have been made on a purchase order basis, which orders may be cancelled, changed, or rescheduled with little or no notice or penalty. As a result, our revenue and operating results could fluctuate materially and could be materially and disproportionately impacted by purchasing decisions of our customers, including our larger customers. In the future, our distributors or their end customers may decide to purchase fewer units than they have in the past, may alter their purchasing patterns at any time with limited or no notice, or may decide not to continue to purchase our Precision Timing solutions at all, any of which could cause our revenue to decline materially and materially harm our business, financial condition, and results of operations. Cancellations of, reductions in, or rescheduling of customer orders could also result in the loss of anticipated sales without allowing us sufficient time to reduce our inventory and operating expenses, as a substantial portion of our expenses are fixed at least in the short term. In addition, forecasts provided by customers, end customers, or their affiliates or contract manufacturers may change or may later prove to have been inaccurate which could make demand for our products difficult for us to predict and could expose us to the risks of inventory shortages or excess inventory and materially harm our results of operations. As we no longer intend to acquire inventory to pre-build custom products, we may not be able to fulfill increased demand in the short term. Any of the foregoing events could materially and adversely affect our business, financial condition, and results of operations.

Our revenue and operating results may fluctuate from period to period, which could cause our stock price to fluctuate.

Our revenue and operating results have fluctuated in the past and may fluctuate from period to period in the future due to a variety of factors, many of which are beyond our control. We expect our revenue to fluctuate in the future primarily based on the volume of shipments of our products and average selling price ("ASP") changes. Factors relating to our business that may contribute to fluctuations in our operating results include the following factors, as well as other factors described elsewhere in this report:

•macroeconomic conditions;

•cyclical fluctuations in the semiconductor market;

•customer demand and product life cycles;

28

•the receipt, reduction, or cancellation of, or changes in the forecasts or timing of, orders by customers;

•fluctuations in the levels of inventories held by our distributors or end customers;

•the gain or loss of significant customers;

•changes in our pricing, product cost, and product mix;

•supply chain disruptions, delays, shortages, and capacity limitations;

•market acceptance of our products and our customers’ products;

•our ability to develop, introduce, and market new products and technologies on a timely basis;

•the timing and extent of product development costs;

•new product announcements and introductions by us or our competitors;

•our research and development costs and related new product expenditures and our ability to achieve cost reductions in a timely or predictable manner;

•seasonality and fluctuations in sales by product manufacturers that incorporate our Precision Timing solutions into their products;

•end-market demand into which we have limited insight, including cyclicality, seasonality, and the competitive landscape;

•socioeconomic or political conditions in the countries where we operate or where our products are sold or used;

•the impact of any pandemic, epidemic, or outbreak of disease, including the emergence of new variants of the COVID-19 pandemic, on our business, suppliers, and customers;

•fluctuations in our manufacturing yields;

•significant warranty claims, including those not covered by our suppliers;

•new accounting pronouncements or changes in existing accounting standards; and

•loss of one or more of our executive officers or other key employees;

As a result of these and other factors, you should not rely on the results of any prior quarterly or annual periods, or any historical trends reflected in such results, as indications of our future revenue or operating performance. Fluctuations in our revenue and operating results could cause our stock price to decline and, as a result, you may lose some or all of your investment.

We depend on third parties for our wafer fabrication, assembly, packaging, and testing operations, which exposes us to certain risks that may harm our business.

We operate an outsourced manufacturing business model. As a result, we rely on third parties for all of our manufacturing operations, including wafer fabrication, assembly, packaging, and testing. Although we use multiple third-party supplier sources, we depend on these third parties to supply us with material of a requested quantity in a timely manner that meets our standards for yield, cost, and manufacturing quality. The manufacturing processes of our third-party suppliers for our products require specialized technology that requires certain raw and engineered materials. Many major components, product equipment items, engineered materials, and raw materials, that are procured or subcontracted by our third-party suppliers for manufacturing of our products are procured or subcontracted on a single or sole-source basis. Except for our agreement with Bosch for MEMS wafers, we do not have any long-term supply agreements with any of our other manufacturing suppliers. These third-party manufacturers often serve customers that are larger than us or require a greater portion of their services, which may decrease our relative importance and negotiating leverage with these third parties.

If market demand for wafers or production and assembly materials increases, if a supplier of our wafers fails to procure materials needed for manufacture of our products, or if a supplier of our wafers ceases or suspends operations, our supply of wafers and other materials could become limited. We currently have a ten-year supply agreement with Bosch for the fabrication of our MEMS wafers. The initial term of this supply agreement is through February 2027 and automatically renews. We currently rely on Bosch for our MEMS fabrication, and primarily on TSMC for our analog circuits fabrication, and any disruption in the supply of wafers or any increases in the wafer or materials prices could adversely affect our gross margins and our ability to meet customer demands in a timely manner, or at all, and lead to reduced revenue. In 2021 and

29

the first half of 2022 there were a number of industry-wide supply constraints affecting the supply of analog circuits manufactured by certain foundries, including TSMC, and affecting outsourced semiconductor assembly and test providers (“OSATs”), which limited our ability to fully satisfy an increase in demand for some of our products. Moreover, wafers constitute a large portion of our product cost. If we are unable to negotiate volume discounts or otherwise purchase wafers at favorable prices and in sufficient quantities in a timely manner, our ability to ship our solutions to our customers on time and in the quantity required could be adversely affected, which in turn could cause an unanticipated decline in our sales, harm to our customer relationships, and our gross margins to be adversely affected.

To ensure continued wafer supply, we may be required to establish alternative wafer supply sources, which could require significant expenditures and limit our negotiating leverage. We currently rely on Bosch and TSMC as our primary foundries and suppliers for our MEMS timing devices and analog circuits, respectively, and only a few foundry vendors have the capability to manufacture our most advanced solutions, in particular with respect to our MEMS solution. If we engage alternative supply sources, we may incur additional costs and encounter difficulties and/or delays in qualifying the supply sources. For example, we have a license agreement with Bosch under which Bosch granted us a license to use certain patents. Under this agreement, we are required to pay a royalty fee to Bosch if we engage third parties to manufacture, or if we decide to manufacture ourselves, certain generations of our MEMS wafers through March 31, 2024. In addition, shipments could be significantly delayed while these sources are qualified for volume production. If we are unable to maintain our relationship with Bosch or TSMC, our ability to produce high-quality products could suffer, which in turn could harm our business, financial condition, and results of operations.

We currently primarily rely on Advanced Semiconductor Engineering, Inc. (“ASE”), Carsem (M) Sdn. Bhd. (“Carsem”), and United Test and Assembly Center Ltd. (“UTAC”) for assembly and testing, as well as Daishinku Corp. (“Daishinku”), UTAC, Hana Semiconductor (Ayutthaya) Co., Ltd, and ASE for ceramic packaging for some of our products. We enter into capacity agreements with certain of our OSATs from time to time which may adversely impact our gross margins and results of operations if we do not purchase required minimum quantities.

Certain of our manufacturing, packaging, assembly, and testing facilities are located outside of the United States, including Malaysia, Taiwan, and Thailand, where we are subject to increased risk of political and economic instability, difficulties in managing operations, difficulties in enforcing contracts and our intellectual property, severe weather, and employment and labor difficulties. Additionally, public health crises, such as an outbreak of contagious diseases like the COVID-19 pandemic, may affect the production capabilities of our suppliers, including as a result of quarantines, closures of production facilities, lack of supplies, or delays caused by restrictions on travel or work-from-home orders. Restrictions like these could limit our suppliers’ ability to operate their manufacturing facilities.

Any of these factors could result in manufacturing and supply problems, and delays in our ability to provide our solutions to our customers on a timely basis, or at all. If we experience manufacturing problems at a particular location, we may be required to transfer manufacturing to a new location or supplier. Converting or transferring manufacturing from a primary location or supplier to a backup facility could be expensive and could take several quarters or more. During such a transition, we would be required to meet customer demand from our then-existing inventory, as well as any partially finished goods that could be modified to the required product specifications. In addition, our end customers may require requalification with a new wafer manufacturer. We typically maintain at least a three-month supply of our MEMS wafers for which Bosch is our primary supplier. We do not otherwise maintain sufficient inventory to address a lengthy transition period. As a result, we may not be able to meet customer needs during such a transition, which could damage our customer relationships. Although we maintain business disruption insurance, this insurance may not be adequate to cover any losses we may experience as a result of such difficulties.

If one or more of the third parties we rely on for our manufacturing operations terminates its relationship with us, or if we encounter any problems with our manufacturing supply chain, our ability to ship our solutions to our customers on time and in the quantity required would be adversely affected, which in turn could cause an unanticipated decline in our sales, harm to our customer relationships and loss of customers.

A significant portion of our operations is located outside of the United States, which subjects us to additional risks, including increased complexity and costs of managing international operations and geopolitical instability.

We outsource the fabrication and assembly of all of our products to third parties that are primarily located in Germany and Asia. In addition, we conduct research and development activities in locations including the United States, Japan, the Netherlands, Taiwan, Ukraine, Finland, and India. We also conduct marketing and administrative functions in the United States, Japan, the Netherlands, China, Taiwan, Malaysia, Ukraine, and India. Members of our sales force are located in various locations outside of the United States. Certain of the critical functions for our business are performed in locations outside of the United States. In addition, approximately 89% and 80% of our revenue for the three months ended March 31, 2024 and 2023, respectively was from distributors with ship-to locations outside the United States, although we believe

30

the majority of our end customers are based in the U.S. based on sell-through information provided by these distributors. As a result of our international focus, we face numerous challenges and risks, including:

•complexity and costs of managing international operations, including manufacturing, assembly, and testing of our products and associated costs;

•geopolitical and military conflicts, including the effects of Russia’s invasion of Ukraine;

•economic instability, including the effects of rising inflation and increased interest rates;

•limited protection for, and vulnerability to theft of, our intellectual property rights, including our trade secrets;

•compliance with local laws and regulations and unanticipated changes in local laws and regulations, including tax laws and regulations;

•trade and foreign exchange restrictions and higher tariffs, including the ongoing trade tensions between the U.S. and China that has resulted in higher tariffs on certain semiconductor products and increased trade restrictions;

•timing and availability of import and export licenses and other governmental approvals, permits, and licenses, including export classification requirements;

•foreign currency fluctuations and exchange losses relating to our international operating activities;

•restrictions imposed by the U.S. government or foreign governments on our ability to do business with certain companies or in certain countries as a result of international political conflicts and the complexity of complying with those restrictions;

•transportation delays and other consequences of limited local infrastructure, and disruptions, such as large scale outages or interruptions of service from utilities or telecommunications providers;

•difficulties in staffing international operations;

•changes in immigration policies which may impact our ability to hire personnel;

•local business and cultural factors that differ from our normal standards and practices;

•differing employment practices and labor relations;

•requirements in foreign countries which may impact availability of personnel, such as mandatory military service in countries such as Ukraine, Taiwan, and Finland;

•heightened risk of terrorist acts;

•regional health issues and the impact of public health epidemics on employees and the global economy, such as the worldwide COVID-19 pandemic;

•power outages and natural disasters; and

•travel, work-from-home or other restrictions or stoppages, like those imposed by governments around the world as a result of pandemics.

These risks could harm our international operations, delay new product releases, increase our operating costs, and hinder our ability to grow our operations and business and, consequently, our business, financial condition, and results of operations could suffer. For example, we rely on TSMC in Taiwan for the fabrication of our analog circuits and have engineering personnel in Taiwan and sales force personnel in China. If political tensions between China and Taiwan were to increase further, it could disrupt our business and adversely affect our financial condition and results of operations. In addition, given the current political and military situation in Russia and Ukraine, if the relationship between Russia and the United States worsens further, or we are restricted or precluded from continuing our operations in Ukraine, it could disrupt our business, our costs could increase, and our product development efforts, business, financial condition, and results of operations could be significantly harmed. Further, the COVID-19 pandemic led to travel, work-from-home, and other restrictions, which significantly impacted our domestic and international operations and the operations of our suppliers, distributors, partners, and customers.

31

Our success and future revenue depend on our ability to achieve design wins and to convince our current and prospective customers to design our products into their product offerings. If we do not continue to win designs or our products are not designed into our customers’ product offerings, our results of operations and business will be harmed.

We sell our Precision Timing solutions to customers who select our solutions for inclusion in their product offerings. This selection process is typically lengthy and may require us to incur significant design and development expenditures and dedicate scarce engineering resources in pursuit of a single design win with no assurance that our solutions will be selected. If we fail to convince our current or prospective customers to include our products in their product offerings or to achieve a consistent number of design wins, our business, financial condition, and results of operations will be harmed.

Because of our extended sales cycle, our revenue in future years is highly dependent on design wins we are awarded in prior years. It is typical that a design win will not result in meaningful revenue for a year or more, if at all. If we do not continue to achieve design wins in the short term, our revenue in the following years may deteriorate.

Further, a significant portion of our revenue in any period may depend on a single product design win with a large customer. As a result, the loss of any key design win or any significant delay in the ramp of volume production of the customer’s products into which our product is designed could adversely affect our business, financial condition, and results of operations. We may not be able to maintain sales to our key customers or continue to secure key design wins for a variety of reasons, and our customers can stop incorporating our products into their product offerings with limited notice to us and suffer little or no penalty.

If we fail to anticipate or respond to technological shifts or market demands, or to develop new or enhanced products or technologies in response to the same in a timely manner, it could result in decreased revenue and the loss of our design wins to our competitors. Due to the interdependence of various components in the systems within which our products and the products of our competitors operate, customers are unlikely to change to another design, once adopted, until the next generation of a technology. As a result, if we fail to introduce new or enhanced products that meet the needs of our customers or penetrate new markets in a timely manner, and our designs do not gain acceptance, we will lose market share and our competitive position.

The loss of a key customer or design win, a reduction in sales to any key customer, a significant delay or negative development in our customers’ product development plans, or our inability to attract new significant customers or secure new key design wins could seriously impact our revenue and materially and adversely affect our business, financial condition, and results of operations.

We may experience difficulties demonstrating the value to customers of newer solutions if they believe existing solutions are adequate to meet end customer expectations. If we are unable to sell new generations of our product, our business would be harmed.

As we develop and introduce new solutions, we face the risk that customers may not value or be willing to bear the cost of incorporating these newer solutions into their product offerings, particularly if they believe their customers are satisfied with prior offerings. Regardless of the improved features or superior performance of the newer solutions, customers may be unwilling to adopt our new solutions due to design or pricing constraints. Because of the extensive time and resources that we invest in developing new solutions, if we are unable to sell new generations of our solutions, our revenue could decline and our business, financial condition, and results of operations would be negatively affected.

Some of our customer and other third-party agreements provide for joint and/or custom product development, which subject us to a number of risks, and any failure to execute on any of these arrangements could have a material adverse effect on our business, results of operations, and financial condition.

We have entered into development, product collaboration and technology licensing arrangements with some of our customers and other third parties, and we expect to enter into new arrangements of these kinds from time to time in the future. These agreements may increase risks for us, such as the risks related to timely delivery of new products, risks associated with the ownership of the intellectual property developed, risks that such activities may not result in products that are commercially successful or available in a timely fashion, and risks that third parties involved may abandon or fail to perform their obligations related to such agreements. In addition, such arrangements may provide for exclusivity periods during which we may only sell specified products or technologies to that particular customer. Any failure to develop commercially successful products under such arrangements in a timely manner as a result of any of these and other challenges could have a material adverse effect on our business, results of operations, and financial condition.

The success of our products is dependent on our customers’ ability to develop products that achieve market acceptance, and our customers’ failure to do so could negatively affect our business.

The success of our Precision Timing solutions is heavily dependent on the timely introduction, quality, and market acceptance of our customers’ products incorporating our solutions, which are impacted by factors beyond our control. Our

32

customers’ products are often very complex and subject to design complexities that may result in design flaws, as well as potential defects, errors, and bugs. We have in the past been subject to delays and project cancellations as a result of design flaws in the products developed by our customers, changing market requirements, such as the customer adding a new feature, or because a customer’s product fails their end customer’s evaluation or field trial. In other cases, customer products are delayed due to incompatible deliverables from other vendors. We incur significant design and development costs in connection with designing our products for customers’ products that may not ultimately achieve market acceptance. If our customers discover design flaws, defects, errors, or bugs in their products, or if they experience changing market requirements, failed evaluations or field trials, or incompatible deliverables from other vendors, they may delay, change, or cancel a project, and we may have incurred significant additional development costs and may not be able to recoup our costs, which in turn would adversely affect our business, financial condition, and results of operations.

Our target customer and product markets may not grow or develop as we currently expect, and if we fail to penetrate new markets and scale successfully within those markets, our revenue and financial condition would be harmed.

Our target markets include the communications, datacenter, and enterprise, automotive, industrial, aerospace, and mobile, IoT, and consumer markets. Substantially all of our revenue to date has been attributable to sales of MEMS oscillators. We have expanded our products to include clock IC and timing sync solutions. Any deterioration in our target customer or product markets or reduction in capital spending to support these markets could lead to a reduction in demand for our products, which would adversely affect our revenue and results of operations. Further, if our target customer markets do not grow or develop in ways that we currently expect, demand for our technology may not materialize as expected, which would also negatively impact our business, financial condition, and results of operations.

We may be unable to predict the timing or development of trends in our target markets with any accuracy. If we fail to accurately predict market requirements or market demand for these solutions, our business will suffer. A market shift towards an industry standard that we may not support could significantly decrease the demand for our solutions.

Our future revenue growth, if any, will depend in part on our ability to expand within our existing markets and our ability to enter into new markets. Each of our end markets presents distinct and substantial challenges and risks and, in many cases, requires us to develop new customized solutions to address the particular requirements of that market. Meeting the technical requirements and securing future design wins in any of these new markets will require a substantial investment of our time and resources. We cannot assure you that we will secure future design wins from these or other new markets, or that we will achieve meaningful revenue from sales in these markets. If new markets do not develop as we currently anticipate or if we are unable to penetrate them and scale in them successfully, our revenue could decline.

Fluctuations in exchange rates between and among the currencies of the countries in which we do business could adversely affect our results of operations.

Our sales have been historically denominated in U.S. dollars, even when sold to customers located outside of the U.S. An increase in the value of the U.S. dollar relative to the currencies of the countries in which our customers operate could increase the real cost to our customers of our products and impair the ability of our customers to cost-effectively purchase or integrate our solutions into their product offerings, which may materially affect the demand for our solutions and cause these customers to reduce their orders, or may increase pressure on us to lower our product prices, which in each case would adversely affect our revenue and business.

If we increase operations in other currencies in the future, we may experience foreign exchange gains or losses due to the volatility of other currencies compared to the U.S. dollar. Certain of our employees are located in Malaysia, the Netherlands, Taiwan, Japan, Korea, Germany, Finland, France, Ukraine, and India. Accordingly, a portion of our payroll as well as certain other operating expenses are paid in currencies other than the U.S. dollar. Our results of operations are denominated in U.S. dollars, and the difference in exchange rates in one period compared to another may directly impact period-to-period comparisons of our results of operations. Furthermore, currency exchange rates have been especially volatile in the recent past, and these currency fluctuations may make it difficult for us to predict our results of operations.

The average selling prices of our individual products have fluctuated historically over time and may do so in the future, which could harm our revenue and gross margins.

Although on average selling prices of our products have increased over time as we introduce higher end products, the average selling prices of our individual products generally decrease over time. Our customers may change their purchase orders and demand forecasts at any time with limited notice due in part to fluctuating end-market demand, which can sometimes lead to price renegotiations. Although these price renegotiations can sometimes result in the average selling prices of the specified product fluctuating over the shorter term, we expect average selling prices of individual products generally to decline over the longer term as that product and our end customers’ products mature.

33

We seek to offset the anticipated reductions in our average selling prices of individual products by reducing the cost of our products through improvements in manufacturing yields and lower wafer, assembly, and testing costs, developing new products, enhancing lower-cost products on a timely basis, and increasing unit sales. However, if we are unable to offset these anticipated reductions in our average selling prices, our business, financial condition, and results of operations could be negatively affected.

If we are not able to successfully introduce and ship in volume new products in a timely manner, our business and revenue will suffer.

We have developed products that we anticipate will have product life cycles of ten years or more, as well as other products in more volatile high growth or rapidly changing areas, which may have shorter life cycles. Our future success depends, in part, on our ability to develop and introduce new technologies and products that generate new sources of revenue to replace, or build upon, existing revenue streams. If we are unable to consistently introduce new products that ship in volume, or if our transition to these new products does not successfully occur prior to any decrease in revenue from our prior products, our revenue will likely decline significantly and rapidly.

Pandemics, epidemics, or other outbreaks of disease have had and may in the future have an adverse impact upon our business, results of operations and financial condition.

A future pandemic, epidemic, health crisis, or other outbreak of disease, including the emergence of new COVID-19 variants, may negatively and materially impact our business, results of operations, and financial condition, due to:

•a global economic recession or depression that could significantly reduce demand and/or prices for our products;

•reduced productivity in our product development, operations, marketing, sales, and other activities;

•government mandates, guidance, or recommendations regarding shutdown, closures, or other restrictions;

•disruptions to our supply chain;

•higher rate of losses on our accounts receivable due to credit defaults; or

•volatility in our stock price.

The COVID-19 pandemic created worldwide uncertainty and significantly and negatively impacted the global economy which caused significant uncertainty and volatility in global financial markets and the trading prices for the common stock of technology companies, including ours. As a result of the COVID-19 pandemic, from time to time government authorities imposed lockdowns and other restrictions. The COVID-19 pandemic impacted our workforce and the operations of our customers and suppliers. In response to the COVID-19 pandemic and related government measures, we implemented safety measures to protect our employees and contractors at our locations around the world.

The potential impact that a future pandemic, epidemic, health crisis, or other outbreak of disease, including the emergence of new COVID-19 variants could have on our business, results of operations, and financial condition, and on the other risk factors described in this “Risk Factors” section, remain unclear and difficult to predict.

Our gross margins may fluctuate due to a variety of factors, which could negatively impact our results of operations and our financial condition.

Our gross margins may fluctuate due to a number of factors, including customer and product mix, market acceptance of our new products, timing and seasonality of the end-market demand, yield, wafer pricing, packaging, and testing costs, competitive pricing dynamics, and geographic and market pricing strategies.

To attract new customers or retain existing customers, we have in the past and will in the future offer certain customers favorable prices, which would decrease our average selling prices and likely impact gross margins. Further, we may also offer pricing incentives to our customers on earlier generations of products that inherently have a higher cost structure, which would negatively affect our gross margins. In addition, in the event our customers, including our larger end customers, exert more pressure with respect to pricing and other terms with us, it could put downward pressure on our margins.

Because we do not operate our own manufacturing, assembly, or testing facilities, we may not be able to reduce our costs as rapidly as companies that operate their own facilities, and our costs may even increase, which could further reduce our gross margins. For instance, we continued to see increases in our manufacturing costs in fiscal year 2023 due to industry wide increases in costs. We rely primarily on obtaining yield improvements and volume-based cost reductions to drive cost reductions in the manufacture of existing products, introducing new products that incorporate advanced features and optimize die size, and other price and performance factors that enable us to increase revenue while maintaining gross

34

margins. To the extent that such cost reductions or revenue increases do not occur at a sufficient level and in a timely manner, our business, financial condition, and results of operations could be adversely affected.

In addition, we maintain an inventory of our products at various stages of production and in some cases as finished good inventory. We hold these inventories in anticipation of customer orders. If those customer orders do not materialize in a timely manner, we may have excess or obsolete inventory which we would have to reserve or write-down, and our gross margins would be adversely affected.

Our revenue in previous periods may not be indicative of future performance and our revenue may fluctuate over time.

Our revenue has fluctuated over time. Our revenue was $33.0 million and $38.3 million for the three months ended March 31, 2024 and 2023, respectively. You should not rely on our revenue for any previous quarterly or annual periods as any indication of our revenue for future fiscal periods. As we grow our business, our revenue may fluctuate in future periods due to a number of reasons, which may include macroeconomic conditions, slowing demand for our products, increasing competition, a decrease in the growth of our overall market or market saturation, or our failure to capitalize on growth opportunities.

If we are unable to manage our growth effectively, we may not be able to execute our business plan and our operating results could suffer.

In order to succeed in executing our business plan, we will need to manage our growth effectively as we make significant investments in research and development and sales and marketing, and expand our operations and infrastructure both domestically and internationally. If our revenue does not increase to offset these increases in our expenses, we may not achieve or maintain profitability in future periods.

To manage our growth effectively, we must continue to expand our operations, engineering, financial accounting, internal management, and other systems, procedures, and controls. This may require substantial managerial and financial resources, and our efforts may not be successful. Any failure to successfully implement systems enhancements and improvements will likely have a negative impact on our ability to manage our expected growth, as well as our ability to ensure uninterrupted operation of key business systems and compliance with the rules and regulations applicable to public companies. If we are unable to manage our growth effectively, we may not be able to take advantage of market opportunities or develop new Precision Timing solutions, and we may fail to satisfy customer product or support requirements, maintain the quality of our solutions, execute our business plan or respond to competitive pressures, any of which could negatively affect our business, financial condition, and results of operations.

Our customers require our products and our third-party contractors to undergo a lengthy and expensive qualification process, which does not assure product sales. If we are unsuccessful or delayed in qualifying any of our products with a customer, our business and operating results would suffer.

Prior to purchasing our Precision Timing solutions, our customers require that both our solutions and our third-party contractors undergo extensive qualification processes, which involve testing of our products in the customers’ systems, as well as testing for reliability. This qualification process may continue for several months. However, qualification of a product by a customer does not assure any sales of the product to that customer. Even after successful qualification and sales of a product to a customer, a subsequent revision in our third-party contractors’ manufacturing process or our selection of a new supplier may require a new qualification process with our customers, which may result in delays and in our holding excess or obsolete inventory. After our products are qualified, it can take several months or more before the customer commences volume production of components or systems that incorporate our products. Despite these uncertainties, we devote substantial resources, including design, engineering, sales, marketing, and management efforts, to qualifying our products with customers in anticipation of sales. If we are unsuccessful or delayed in qualifying any of our products with a customer, sales of those products to the customer may be precluded or delayed, which would cause our business, financial condition, and results of operations to suffer.

We provide a lifetime warranty on our products and may be subject to warranty or product liability claims, which could result in unexpected expenses and loss of market share.

We provide a lifetime warranty on our products and generally agree to indemnify our customers for defects in our products or failure of our products to meet our product specifications. Defects in our products could make our products unsafe and create a risk of property damage or personal injury. These risks may increase where our products are incorporated into specialized end products in industries such as automotive, aerospace, defense, and medical device. We may be subject to warranty or product liability claims. These claims may require us to make significant expenditures to defend those claims, replace our solutions, refund payments, or pay damage awards. This risk is exacerbated by the lifetime warranty of our products, which exposes us to warranty claims for the entire product lifecycle.

35

Our Precision Timing solutions have only been incorporated into end products since 2008. Accordingly, the operation of our products and technology has not been validated over longer periods. If a customer’s product fails in use, the customer may incur significant monetary damages, including a product recall or associated replacement expenses as well as lost revenue. The customer may claim that a defect in our product caused the product failure and assert a claim against us to recover monetary damages. In certain situations, circumstances might warrant that we consider incurring the costs or expenses related to a recall of one of our products in order to avoid the potential claims that may be raised should a customer reasonably rely upon our product and suffer a failure due to a design or manufacturing process defect. In addition, the cost of defending these claims and satisfying any arbitration award or judgment with respect to these claims would result in unexpected expenses, which could be substantial, and could harm our business, financial condition, and results of operations. Although we carry product liability insurance, this insurance is subject to significant deductibles and may not adequately cover our costs arising from defects in our products or otherwise.

Defects in our products or failures to meet product specifications could harm our relationships with our customers and damage our reputation.

Our products must meet demanding specifications for quality, performance, and reliability. Defects in our products or failure of our products to meet required product specifications may cause our customers to be reluctant to buy our products, which could harm our ability to retain existing customers and attract new customers and adversely impact our reputation. The process of identifying a defective or potentially defective product in systems that have been widely distributed may be lengthy and require significant resources. Further, if we are unable to determine the root cause of a problem or find an appropriate solution, we may delay shipment to customers. As a result, we may incur significant replacement costs and contract damage claims from our customers, and our reputation, business, financial condition, and results of operations may be adversely affected.

Though we are not currently aware of any occurrences, from time to time our products may be diverted from our supply chain or authorized distribution channels and sold on the “black market” or “gray market.” Customers purchasing our products on the black market or the gray market may use our products for purposes for which they were not intended, or may purchase counterfeit or substandard products, for instance that have been altered or damaged, which could result in damage to property or persons which could harm our business and cause our reputation to be adversely affected.

If we fail to accurately anticipate and respond to rapid technological change in the industries in which we operate, our ability to attract and retain customers could be impaired and our competitive position could be harmed.

We operate in industries characterized by rapidly changing technologies as well as technological obsolescence. The introduction of new products by our competitors, the delay or cancellation of any of our customers’ product offerings for which our Precision Timing solutions are designed, the market acceptance of products based on new or alternative technologies, or the emergence of new industry standards could render our existing or future products uncompetitive, obsolete, and otherwise unmarketable. Our failure to anticipate or develop new or enhanced products or technologies in a timely manner in response to changing market demand, whether due to technological shifts or otherwise, could result in the loss of customers and decreased revenue and have an adverse effect on our business, financial condition, and results of operations.

If our products do not conform to, or are not compatible with, existing or emerging industry standards, demand for our existing solutions may decrease, which in turn would harm our business and operating results.

We design certain of our products to conform to current industry standards. Some industry standards may not be widely adopted or implemented uniformly and competing standards may emerge that may be preferred by our distributors or our end customers.

Our ability to compete in the future will depend on our ability to identify and ensure compliance with evolving industry standards in our target markets, as well as in the timing IC industry. The emergence of new industry standards could render our products incompatible with products developed by third-party suppliers or make it difficult for our products to meet the requirements of certain OEMs. If our customers or our third-party suppliers adopt new or competing industry standards with which our solutions are not compatible, or if industry groups fail to adopt standards with which our solutions are compatible, our products would become less desirable to our current or prospective customers. As a result, our sales would suffer, and we could be required to make significant expenditures to develop new products. Although we believe our products are compliant with applicable industry standards, proprietary enhancements may not in the future result in conformance with existing industry standards under all circumstances. If our products do not conform to, or are not compatible with, existing or emerging standards, it would harm our business, financial condition, and results of operations.

36

We may be unable to make the substantial investments that are required to remain competitive in our business.

The semiconductor industry requires substantial and continuous investment in research and development in order to bring to market new and enhanced solutions. We expect our research and development expenditures to increase in the future as part of our strategy to increase demand for our solutions in our current markets and to expand into additional markets. We are a smaller company with limited resources, and we may not have sufficient resources to maintain the level of investment in research and development required to remain competitive. In addition, we cannot assure you that the technologies, which are the focus of our research and development expenditures, will become commercially successful or generate any revenue.

If we fail to compete effectively, we may lose or fail to gain market share, which could negatively impact our operating results and our business.

The global semiconductor market in general, and the timing market in particular, is highly competitive. We expect competition to increase and intensify as additional companies enter our target markets, and as internal silicon design resources of large OEMs grow. Increased competition could result in price pressure, reduced gross margins and loss of market share, any of which could harm our business, financial condition, and results of operations. Our competitors range from large, international companies offering a wide range of timing products to smaller companies, including start-ups, specializing in narrow market verticals. Companies that we primarily compete with include, but are not limited to, Abracon LLC, Daishinku Corporation, Diodes Incorporated, Kyocera Corporation, Microchip Technology Inc., Murata Manufacturing Co., Ltd., Nihon Dempa Kogyo Co., Ltd., Rakon Limited, Renesas Electronics Corporation, Seiko Epson Corporation, Skyworks Solutions, Inc., Texas Instruments Incorporated, and TXC Corporation. We expect competition in our current markets to increase in the future as existing competitors improve or expand their technology and product offerings and as new competitors enter these markets. In addition, our future growth will depend in part on our ability to successfully enter and compete in new markets. Some of these markets will likely be served by only a few large, multinational OEMs with substantial negotiating and buying power relative to us and, in some instances, with internally developed silicon solutions that can be competitive to our products.

Our ability to compete successfully depends, in part, on factors that are outside of our control, including industry and general economic trends. Many of our competitors are substantially larger, have greater financial, technical, marketing, distribution, customer support, government support, and other resources, are more established than we are, and have significantly better brand recognition and broader product offerings. This may enable them to better withstand downturns in the timing market in which we compete, as well as adverse economic or market conditions. Our ability to compete successfully will depend on a number of factors, including:

•our ability to define, design, and regularly introduce new products that anticipate the functionality and integration needs of our customers’ next-generation products and applications;

•our ability to build strong and long-lasting relationships with our customers and other industry participants;

•our ability to capitalize on, and prevent losses due to, vertical integration by significant customers;

•our solutions’ performance and cost-effectiveness relative to those of competing products;

•our ability to achieve design wins;

•the effectiveness and success of our customers’ products utilizing our solutions within their competitive end markets;

•our research and development capabilities to provide innovative solutions and maintain our product roadmap;

•the strength of our sales and marketing efforts, including those of our distributors, and our brand awareness and reputation;

•our ability to secure capacity with our foundry and assembly partners to manufacture and assemble our products;

•our ability to deliver products in volume on a timely basis at competitive prices;

•our ability to withstand or respond to significant price competition;

•our ability to build and expand international operations in a cost-effective manner;

37

•our ability to obtain, maintain, protect, and enforce our intellectual property rights, including obtaining intellectual property rights from third-parties that may be necessary to meet the evolving demands of the market;

•our ability to defend potential patent infringement claims arising from third-parties;

•our ability to promote and support our customers’ incorporation of our solutions into their products; and

•our ability to retain high-level talent, including our management team and engineers.

Our competitors may also establish cooperative relationships among themselves or with third-parties or may acquire companies that provide similar products to ours. As a result, new competitors or alliances may emerge that could capture significant market share. Additionally, timing suppliers, especially resonator suppliers, may engage directly with our customers to help the customer build timing products, and eliminate the need for an external timing supplier in some of their applications. Any of these factors, alone or in combination with others, could harm our business, financial condition, and results of operations and result in a loss of market share and an increase in pricing pressure.

We depend on our executive officers and other key employees, and the loss of one or more of these employees or an inability to attract or retain highly skilled employees could adversely affect our business.

Our success depends largely upon the continued services of our executive officers and other highly skilled key employees, including in engineering, product development, operations, sales, and marketing. From time to time, there may be changes in our executive management team or other key personnel, which could disrupt our business. We do not have employment agreements with our executive officers or other key personnel that require them to continue to work for us for any specified period and, therefore, they could terminate their employment with us at any time. The loss of one or more of our executive officers or other key employees, including due to adverse business conditions, could have an adverse effect on our business.

In addition, to execute our growth plan, we must attract and retain highly qualified personnel. Competition for these personnel is intense, especially for engineers with MEMS technology and advanced clock IC design expertise. We have from time to time experienced, and we expect to continue to experience, difficulty in hiring and retaining employees with appropriate qualifications. Many of the companies with which we compete for experienced personnel have greater resources than we have. If we hire employees from competitors or other companies, their former employers may attempt to assert that these employees or we have breached legal obligations, resulting in a diversion of our time and resources. In addition, job candidates and existing employees often consider the value of the equity awards they receive in connection with their employment. If the perceived value of our equity awards declines, it may adversely affect our ability to recruit and retain highly skilled employees. Further, changes in immigration policies may negatively impact our ability to attract and retain personnel, including personnel with specialized technical expertise. If we fail to attract new personnel or fail to retain or motivate our current personnel, our business and future growth prospects could be adversely affected.

Our company culture has contributed to our success and if we cannot maintain this culture, our business could be harmed.

We believe that our company culture, which promotes innovation, open communication, and teamwork, has been critical to our success. We face a number of challenges that may affect our ability to sustain our corporate culture, including:

•the potential failure to identify, attract, reward, and retain people in leadership positions in our organization who share and further our culture, values, and mission;

•the increasing size and geographic diversity of our workforce;

•competitive pressures to move in directions that may divert us from our mission, vision, and values;

•the continued challenges of a rapidly-evolving industry; and

•the increasing need to develop expertise in new areas of business that affect us.

If we are not able to maintain our culture, our business, financial condition, and results of operations could be adversely affected.

Our acquisition of certain assets and an exclusive license to certain intellectual property of Aura involves a number of risks.

On December 1, 2023, we closed the acquisition of certain assets and an exclusive license to certain intellectual property of Aura. The payment obligations in connection with the acquisition have and will continue to reduce our liquidity, and may

38

limit our flexibility in responding to other business opportunities, as well as increase our vulnerability to adverse economic and industry conditions.

We entered into the transaction with Aura with the expectation that the transaction would result in various benefits to us, including the expansion of our product portfolio, and growth of our business. To realize the anticipated benefits of the acquisition, the products of Aura must be successfully completed, delivered to us, and then integrated. Product completion can be complex and time consuming, and Aura may not be able to deliver the products on time or deliver products that meet the agreed specified criteria. Further, we may face significant challenges in integrating the technologies and products. If the products are not successfully completed and integrated, the anticipated benefits of the transactions may not be realized fully or may take longer to realize than expected. The acquisition may not further our business strategy as we expected and we may experience unanticipated costs or liabilities associated with the acquisition, which could adversely affect our business or operating results and potentially cause impairment to assets that we recorded as a part of the acquisition including intangible assets and goodwill. In addition, if we are unable to integrate and retain personnel that joined us as part of the transaction with Aura, we may not be able to fully capitalize on the benefits. Any of the above could decrease the benefits we expect to receive from the agreement with Aura and adversely affect our financial condition and operating results.

We may make acquisitions in the future that could disrupt our business, cause dilution to our stockholders, reduce our financial resources, and harm our business.

In the future, we may acquire other businesses, products, or technologies. Our ability to make acquisitions and successfully integrate personnel, technologies, or operations of any acquired business is unproven. If we complete acquisitions, we may not achieve the combined revenue, cost synergies, or other benefits from the acquisition that we anticipate, strengthen our competitive position, or achieve our other strategic goals in a timely manner, or at all, and these acquisitions may be viewed negatively by our customers, financial markets, or investors. In addition, any acquisitions we make may create difficulties in integrating personnel, technologies, and operations from the acquired businesses and in retaining and motivating key personnel. Acquisitions may disrupt our ongoing operations, divert management from their primary responsibilities, cause us to forgo other potential transactions or internal projects, subject us to additional liabilities, increase our expenses, and adversely impact our business, financial condition, and results of operations. Acquisitions may also reduce our cash available for operations and other uses, and could result in an increase in amortization expense related to identifiable assets acquired, potentially dilutive issuances of equity securities, or the incurrence of debt, any of which could harm our business, financial condition, and results of operations. Further, acquisitions may result in charges such as acquisition-related expenses, write-offs, restructuring charges, or future impairment of goodwill, as well as contingent liabilities, adverse tax consequences, additional share-based compensation expense, and other charges that could adversely affect our results of operations.

If we enter into an agreement for an acquisition, the transaction, or parts of the transaction, may fail to be completed due to factors such as: failure to obtain regulatory or other required approvals, disputes or litigation, or difficulties obtaining financing for the transaction. Even if we fail to complete an acquisition, we may have incurred significant expenses in connection with such transaction and the failure to complete a pending acquisition may result in negative publicity and a negative perception of us among the investment community.

For the foregoing reasons, pursuit of an acquisition of other businesses, products, or technologies could adversely impact our business, financial condition, and results of operations.

If the foundries with which we contract do not achieve satisfactory yields or quality, our reputation and customer relationships could be harmed.

We depend on satisfactory wafer foundry manufacturing capacity, wafer prices, and production yields, as well as timely wafer delivery to meet customer demand and enable us to maintain gross margins. The fabrication of our products is a complex and technically demanding process. Minor deviations in the manufacturing process can cause substantial decreases in yields and, in some cases, cause production to be suspended. Our foundry vendors may experience manufacturing defects and reduced manufacturing yields from time to time. Further, any new foundry vendors we employ may present additional and unexpected manufacturing challenges that could require significant management time and focus. Changes in manufacturing processes or the inadvertent use of defective or contaminated materials by the foundries that we employ could result in lower than anticipated production yields or unacceptable performance of our devices. Many of these problems are difficult to detect at an early stage of the manufacturing process and may be time-consuming and expensive to correct. Poor production yields from the foundries that we employ, or defects, integration issues, or other performance problems in our solutions could significantly harm our customer relationships and financial results and give rise to financial or other damages to our customers. Any product liability claim brought against us, even if unsuccessful, would likely be time-consuming and costly to defend.

39

Manufacturing yields for new products initially tend to be lower as we complete product development and commence volume manufacturing, and typically increase as we bring the product to full production. Our business model includes this assumption of improving manufacturing yields and, as a result, material variances between projected and actual manufacturing yields will have a direct effect on our gross margin and profitability. The difficulty of accurately forecasting manufacturing yields and maintaining cost competitiveness through improving manufacturing yields will continue to be magnified by the increasing process complexity of manufacturing semiconductor products.

Raw material and engineered material availability and price fluctuations have in the past and may in the future increase the cost of our products, impact our ability to meet customer commitments, and may adversely affect our results of operations.

The cost of raw and engineered materials is a key element in the cost of our products. Our inability to offset material price inflation through increased prices to customers, suppliers, productivity actions, or through commodity hedges could adversely affect our results of operations. Many major components, product equipment items, engineered materials, and raw materials, are procured or subcontracted on a single or sole-source basis. Although we maintain a qualification and performance surveillance process and we believe that sources of supply for engineered materials, raw materials, and components are generally adequate, it is difficult to predict what effects limited or delayed availability, or price increases may have in the future. Our inability to fill our supply needs would jeopardize our ability to ship our solutions to our customers on time and in the quantity required, which could, in turn, result in reduced sales and profits, and damage to our customer relationships.

Furthermore, increases in the price of silicon wafers, testing costs, and commodities, which may result in increased production costs, mainly assembly and packaging costs, may result in a decrease in our gross margins. Moreover, our suppliers may pass the increase in engineered materials, raw materials and commodity costs onto us which would further reduce the gross margin of our products. In addition, as we are a fabless company, global market trends such as a shortage of capacity to fulfill our fabrication needs also may increase our raw material costs and thus decrease our gross margin.

We rely on our relationships with industry and technology leaders to enhance our product offerings and our inability to continue to develop or maintain such relationships in the future would harm our ability to remain competitive.

We develop many of our Precision Timing solutions for applications in systems that are driven by industry and technology leaders in the communications and computing markets. We work with distributors, OEMs, and system manufacturers to define industry conventions and standards within our target markets. We believe that these relationships enhance our ability to achieve market acceptance and widespread adoption of our products. If we are unable to continue to develop or maintain these relationships, our Precision Timing solutions could become less desirable to our customers, our sales could suffer and our competitive position could be harmed.

Our ability to receive timely payments from, or the deterioration of the financial conditions of, our distributors or our end customers could adversely affect our operating results.

Our ability to receive timely payments from or the deterioration of the financial condition of, our distributors or our end customers could adversely impact our collection of accounts receivable, and, as a result, our revenue. We regularly review the collectability and creditworthiness of our customers to determine an appropriate allowance for credit losses. Based on our review of our customers annually and as of March 31, 2024, substantially all of which are large distributors, OEMs, and system manufacturers, we had $0.1 million and $0.1 million in allowance for credit losses as of March 31, 2024 and December 31, 2023, respectively. If our credit losses, however, were to exceed our current or future allowance for credit losses, our business, financial condition, and results of operations would be adversely affected.

We may not be able to accurately predict our future capital needs, and we may not be able to obtain additional financing to fund our operations.

We may need to raise additional funds in the future. Any required additional financing may not be available on terms acceptable to us, or at all. If we raise additional funds by issuing equity securities or convertible debt, stockholders may experience significant dilution of their ownership interest, and the newly-issued securities may have rights senior to those of the holders of our common stock. If we raise additional funds by obtaining loans from third parties, the terms of those financing arrangements may include negative covenants or other restrictions on our business that could impair our operational flexibility and would also require us to incur additional interest expense. If additional financing is not available when required or is not available on acceptable terms, we may have to scale back our operations or limit our production activities, and we may not be able to expand our business, develop or enhance our solutions, take advantage of business opportunities, or respond to competitive pressures, which could negatively impact our revenue and the competitiveness of our products.

40

Our cash and cash equivalents could be adversely affected if the financial institutions in which we hold our cash and cash equivalents fail.

We regularly maintain cash balances at third-party financial institutions in excess of the Federal Deposit Insurance Corporation (“FDIC”) insurance limit. If a depository institution fails to return our deposits or if a depository institution is subject to other adverse conditions in the financial or credit markets, there is no guarantee that the U.S. Department of Treasury, FDIC or Federal Reserve Board will provide access to uninsured deposits, which could restrict access to our cash or cash equivalents and could adversely impact our operating liquidity, financial condition, and results of operations. As of March 31, 2024, a majority of our cash and short-term investment balances were maintained with Wells Fargo & Co., Morgan Stanley and U.S. Bancorp.

We may seek, or be required to seek, debt financing.

We may seek, or be required to seek, debt financing. Any required financing may not be available on terms acceptable to us, or at all. The terms of any financing arrangements may include negative covenants or other restrictions on our business that could impair our operational flexibility and would also require us to incur additional interest expense. If financing is not available when required or is not available on acceptable terms, it could harm our liquidity position and we may have to scale back our operations or limit our production activities, which in turn would harm our business, operating results, and financial condition.

If significant tariffs or other trade restrictions are placed on our products or third-party suppliers, our revenue and results of operations may be materially harmed.

Most of our revenue has been from sales of products to distributors with ship-to locations outside of the United States. Many of our third-party suppliers are located outside of the United States. If significant tariffs or other restrictions are placed on certain goods, existing tariffs are increased, or any related counter-measures are taken by other countries, our revenue and results of operations may be materially and adversely affected. For example, beginning in July 2018, the U.S. Trade Representative imposed tariffs on products from China and China then imposed certain retaliatory tariffs. It is uncertain what further alterations to trade terms between China and the United States may occur, including limiting trade with China and imposing additional tariffs on imports from China. In the event that future tariffs are imposed on imports of our products or on our third-party suppliers, or that China or other countries take retaliatory trade measures in response to existing or future tariffs or other trade restrictions, or that the United States imposes further restrictions on trade with China, our business may be impacted, and we may be required to raise prices or make changes to our operations, or we may not be able to sell our products to customers in China, any of which could materially harm our revenue or operating results.

Failure to comply with the laws associated with our activities outside of the United States could subject us to penalties and other adverse consequences.

We face significant risks if we fail to comply with anti-corruption laws and anti-bribery laws, including, without limitation, the U.S. Foreign Corrupt Practices Act of 1977, as amended (the “FCPA”), the U.S. Travel Act, and the UK Bribery Act 2010, that prohibit improper payments or offers of payment to foreign governments and political parties by us for the purpose of obtaining or retaining business. In many foreign countries, particularly in countries with developing economies, it may be a local custom that businesses operating in such countries engage in business practices that are prohibited by the FCPA or other applicable laws and regulations. Any violation of these laws could result in severe criminal or civil sanctions and, in the case of the FCPA, suspension or debarment from U.S. government contracting, which could have an adverse effect on our reputation, business, financial condition, and results of operations.

We are subject to government regulation, including import, export and economic sanctions laws and regulations that may expose us to liability and increase our costs.

Our products and technology are subject to U.S. export controls, including the U.S. Department of Commerce’s Export Administration Regulations (“EAR”) and economic and trade sanctions regulations administered by the U.S. Treasury Department’s Office of Foreign Assets Controls. These regulations may limit the export of our products and technology, and provision of our services outside of the United States, or may require export authorizations, including by license, a license exception, or other appropriate government authorizations and conditions, including annual or semi-annual reporting. Export control and economic sanctions laws may also include prohibitions on the sale or supply of certain of our products to embargoed or sanctioned countries, regions, governments, persons, and entities. For example, we sell to markets in Asia where multiple companies have been added to the Entity List, requiring license for exports of items subject to control under the EAR. To our knowledge, we have not sold products subject to the EAR to Entity List persons. In addition, various countries regulate the importation of certain products, through import permitting and licensing requirements, and have enacted laws that could limit our ability to distribute our products. The exportation, re-exportation, and importation of our products and technology and the provision of services, including by our partners, must comply with

41

U.S. and other laws or else we may be adversely affected through reputational harm, government investigations, penalties, and a denial or curtailment of our ability to export our products and technology. Although we take precautions to prevent our products and technology from being provided in violation of such laws, our products and technology may have previously been, and could in the future be, provided inadvertently in violation of such laws, despite the precautions we take. Changes in export or import laws or sanctions policies also may adversely impact our operations, delay the introduction and sale of our products in international markets, or, in some cases, prevent the export or import of our products and technology to certain countries, regions, governments, persons, or entities altogether, which could adversely affect our business, financial condition, and results of operations.

We identified a material weakness in our internal control over financial reporting, and we may identify additional material weaknesses in the future that may cause us to fail to meet our reporting obligations or result in material misstatements of our financial statements. If we fail to remediate any material weaknesses or if we otherwise fail to establish and maintain effective control over financial reporting, our ability to accurately and timely report our financial results could be adversely affected.

As discussed elsewhere in our Annual Report on Form 10-K for the year ended December 31, 2023 filed with the SEC on February 26, 2024, we identified a material weakness in our internal control over financial reporting related to the misclassification of “interest received upon maturity of held-to-maturity securities” as an investing activity instead of as an operating activity in the respective condensed consolidated statements of cash flows for the periods ended March 31, 2023, June 30, 2023, and September 30, 2023. A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of our annual or interim financial statements will not be prevented or detected on a timely basis. Effective internal controls are necessary for us to provide reliable financial reports and prevent fraud. Management, under the oversight from the Audit Committee, implemented additional review procedures to enhance our internal control over financial reporting with respect to the statement of cash flows in order to remediate the material weakness. These review procedures include the development of a review checklist to ensure that we will apply the applicable accounting guidance under Accounting Standards Codification ("ASC") 230, Statement of Cash Flows.

As a result of the material weakness described above or any in future periods, we face potential for adverse regulatory consequences, including investigations, penalties or suspensions by the SEC or Nasdaq, litigation or other disputes which may include, among others, claims invoking the federal and state securities laws, contractual claims, or other claims arising from the restatement and material weakness in our internal control over financial reporting and the preparation of our consolidated financial statements. Any such regulatory consequences, litigation, claim, or dispute, whether successful or not, could subject us to additional costs, divert the attention of our management, or impair our reputation. Each of these consequences could have a material adverse effect on our business, results of operations and financial condition.

We may identify future material weaknesses in our internal controls over financial reporting or fail to meet the demands that will be placed upon us as a public company, including the requirements of the Sarbanes-Oxley Act of 2002, and we may be unable to accurately report our financial results, or report them within the timeframes required by law or stock exchange regulations. We cannot assure that our existing material weakness will be remediated or that additional material weaknesses will not exist or otherwise be discovered, any of which could adversely affect our reputation, financial condition, and results of operations.

Our internal control over financial reporting may not prevent or detect misstatements because of its inherent limitations, including the possibility of human error, failure or interruption of information technology systems, the circumvention or overriding of controls, or fraud.

Even effective internal controls can provide only reasonable assurance with respect to the preparation and fair presentation of financial statements. If we fail to maintain the adequacy of our internal controls, including any failure to implement required new or improved controls, or if we experience difficulties in their implementation, our business and operating results could be harmed, and we could fail to meet our financial reporting obligations.

Changes in environmental laws or regulations, as well as environmental, social, and governance initiatives, could impose substantial costs and may adversely affect our business.

Our product or manufacturing standards could be impacted by new or revised environmental rules and regulations or other social initiatives. For example, a significant portion of our revenue comes from international sales. Environmental laws or regulations in those countries or in the countries of our end customers may increase our cost of doing business and adversely affect our business and results of operations.

Increasingly customers, regulators, investors, employees, and other stakeholders are focusing on environmental, social, and governance ("ESG") matters. While we have certain ESG initiatives, there is no assurance that customers, regulators, investors, and employees will determine that these programs are sufficient. Any actual or perceived shortcomings with

42

respect to our ESG initiatives and reporting can impact our ability to retain certain customers or increase our customer base, reelect our board of directors, attract and retain certain types of investors, or hire and retain employees. Collecting, measuring, and reporting ESG information and metrics can be costly, difficult and time consuming, is subject to evolving reporting standards, and can present numerous operational, reputational, financial, legal, and other risks, any of which could adversely affect our business as well as on our reputation and stock price.

New or future changes to U.S. and non-U.S. tax laws could materially adversely affect us.

New or future changes in tax laws, regulations, and treaties, or the interpretation thereof, in addition to tax regulations enacted but not in effect, tax policy initiatives and reforms under consideration in the United States or related to the Organization for Economic Co-operation and Development’s (“OECD”), Base Erosion and Profit Shifting Project (“BEPSP”), the European Commission’s state aid investigations, and other initiatives could have an adverse effect on the taxation of international businesses. Furthermore, countries where we are subject to taxes, including the United States, are independently evaluating their tax policy and we may see significant changes in legislation and regulations concerning taxation. Certain countries have already enacted legislation, including those related to BEPSP, which could affect international businesses, and other countries have become more aggressive in their approach to audits and enforcement of their applicable tax laws. In addition, we are unable to predict what future tax reform may be proposed or enacted or what effect such changes would have on our business, but any changes, to the extent they are brought into tax legislation, regulations, policies, or practices, could increase our effective tax rates in the countries where we have operations and have an adverse effect on our overall tax rate, along with increasing the complexity, burden and cost of tax compliance, all of which could impact our business, financial condition, and results of operations.

If we fail to comply with government contracting regulations, we could suffer a loss of revenue or other penalties.

Some of our revenue is derived from contracts with agencies of the U.S. government and subcontracts with its prime contractors. As a result, we are subject to federal contracting regulations, including the Federal Acquisition Regulations. In connection with our business with the U.S. government, we are also subject to audits and review and approval of our policies, procedures, and internal controls for compliance with procurement regulations and applicable laws. In certain circumstances, if we do not comply with the terms of a government contract or with regulations or statutes, we could be subject to downward contract price adjustments or refund obligations or could in extreme circumstances be assessed civil and criminal penalties or be debarred or suspended from obtaining future contracts for a specified period of time, which could have an adverse effect on our business.

Tax regulatory authorities may disagree with our positions and conclusions regarding certain tax positions resulting in unanticipated costs or non-realization of expected benefits.

A tax authority may disagree with tax positions that we have taken. For example, the Internal Revenue Service (“IRS”), or another tax authority could challenge our allocation of income by tax jurisdiction and the amounts paid between our affiliated companies pursuant to our intercompany arrangements and transfer pricing policies, including amounts paid with respect to our intellectual property in connection with our intercompany research and development cost sharing arrangement and legal structure. A tax authority may take the position that material income tax liabilities, interest, and penalties are payable by us, in which case, we expect that we might contest such assessment. Contesting such an assessment may be lengthy and costly and if we were unsuccessful in disputing the assessment, the implications could be materially adverse to us and affect our anticipated effective tax rate or operating income, and we could be required to pay substantial penalties and interest where applicable.

Catastrophic events may disrupt our business.

Our corporate headquarters and some of our suppliers and foundry vendors are located in areas that are in active earthquake zones or are subject to power outages, natural disasters, political, social, or economic unrest, and other potentially catastrophic events. In the event of a major earthquake, hurricane, flooding, or other catastrophic event, including with respect to climate change, such as fire, power loss, telecommunications failure, cyber-attack, war, terrorist attack, political, social, or economic unrest, pandemic, epidemic, health crisis, or disease outbreak, such as the COVID-19 pandemic, we may be unable to continue our operations and may endure system interruptions, reputational harm, delays in our product development, breaches of data security, or loss of critical data, any of which could have an adverse effect on our future results of operations.

State, federal, and foreign laws and regulations and other legal obligations related to privacy, data protection, and data security could adversely affect us.

We are subject to a variety of laws and regulations worldwide related to privacy, data protection, and data security, such as the European Union’s General Data Protection Regulation (GDPR) or California’s Consumer Privacy Act of 2018 and Privacy Rights Act of 2020. These laws and regulations are continuously and rapidly evolving, and the scope and

43

interpretation of the laws and regulations that are or may be applicable to us are often uncertain and may be conflicting. As a result, these laws and regulations may be interpreted and applied in a manner inconsistent with our practices or policies and we could face fines, lawsuits, regulatory investigations, and other claims and penalties, and we could be required to fundamentally change our practices, which could adversely affect our business and operating results. Complying with such laws and regulations may be time-consuming and require additional resources, and could therefore adversely affect our business and results of operations. Any failure or perceived failure by us or our third-party service providers to comply with our privacy, data protection, or data security policies, or legal or contractual obligations, even if unfounded, may result in governmental enforcement actions, litigation, liability, or negative publicity, and could adversely affect our business, financial condition, and results of operations.

Security breaches, cyberattacks, and other disruptions to information technology systems owned or maintained by us or third parties, such as vendors or suppliers, could disrupt our operations, compromise the confidentiality of private customer data or our intellectual property, and adversely affect our business, reputation, operations, and financial results.

We rely on our information technology systems, and those of our vendors, suppliers, and customers, including hardware, software, cloud services, infrastructure, networks, and systems, for the effective operation of our business and for secure maintenance and storage of confidential data relating to our business. Additionally, in the ordinary course of business we collect and store sensitive data, including intellectual property and proprietary business information as well as personal information of our customers and employees, in data centers and on information technology systems, including systems that may be controlled or maintained by third parties. The secure operation of these information technology systems, and the processing and maintenance of the information processed by these systems, is critical to our business operations. While we and others have implemented various controls and defenses, cybersecurity attacks and threats have continued to become more prevalent and sophisticated. These threats are constantly evolving, making it increasingly difficult to successfully defend against or implement adequate preventive measures. Geopolitical tensions or conflicts have in the past led to, and may in the future lead to, increased risk of cybersecurity attacks. Notwithstanding defensive measures, experienced programmers, hackers, state actors, or others may be able to penetrate our security controls, or those of our vendors, suppliers, or customers, through attacks such as, but not limited to, phishing or other forms of social engineering, impersonating authorized users, ransomware, spyware, viruses, worms and other malicious software programs, software supply chain attacks, exploitation of compromised commercial software, bugs and other security weaknesses and vulnerabilities, covert introduction of malware to computers and networks. Any attack on the information technology systems of us or one of our vendors, suppliers, or customers may be difficult to detect, designed to remain dormant until a triggering event, or may continue undetected for an extended period of time. In addition, our information technology systems and those of our vendors, suppliers, and customers may be vulnerable to damage, disruptions, or shutdowns due to errors, negligence or malfeasance by employees, contractors, or others who have access to these systems.

Security breaches, cyberattacks, and other disruptions to our information technology systems or those of our vendors, suppliers, or customers could compromise the confidentiality, operational integrity, and accessibility of our information technology systems, or those of our vendors, suppliers, or customers, which could result in the compromise, unauthorized publication, or loss of proprietary data, intellectual property, or personal information, as well as interruptions or delays in our business operations, loss of existing or future customers, and damage to our reputation, which could adversely affect our business, reputation, and financial results. In addition, such events could result in violations of privacy or other laws, increase the risk of litigation or regulatory investigation, or cause us to incur direct losses if attackers initiate wire transfers or access our bank or investment accounts. We expect ongoing and increasing costs related to investments in technology, controls, processes, and practices, however these investments may not be sufficient to shield us from significant losses or liability in the event of security breaches, cyberattacks, or other disruptions to our information technology systems.

Our business may be impacted by information technology system failures or network disruptions, and lack of redundancy.

Our ability to operate our business depends on the efficient operation of internal and third-party information technology systems, including cloud computing, data centers, hardware, software, and applications, to manage our company. We strive to use quality and secure systems, work with reputable system vendors, and implement procedures intended to enable us to protect our systems.

Our information technology systems and operations could be damaged or interrupted due to events such as natural or human-caused disasters, extreme weather, geopolitical events and security issues, computer viruses, cybersecurity incidents, telecommunication failures, and similar events, which could adversely affect our business, financial condition, and results of operations. Our systems are not fully redundant and depending on the severity of the damage or interruption, our disaster recovery plans may be inadequate or ineffective. These events could also damage our reputation, and result in increased costs or loss of sales.

44

We might not be able to utilize a significant portion of our net operating loss carryforwards and research and development tax credit carryforwards.

As of December 31, 2023, we had U.S. federal, state and foreign net operating loss (“NOL”), carryforwards of approximately $213.3 million, $65.3 million and $1.7 million, respectively, and U.S. federal and state research and development tax credit carryforwards of approximately $3.9 million and $3.6 million, respectively. The U.S. federal, state, and the foreign NOL carryforwards begin to expire in 2028. The U.S. federal research and development tax credit carryforwards begin to expire in 2025 and the state research and development tax credit carryforwards carry forward indefinitely. These net operating loss and U.S. federal tax credit carryforwards could expire unused and/or be unavailable to offset future income tax liabilities. In addition, under Section 382 of the Internal Revenue Code of 1986, as amended (the “Code”), and corresponding provisions of California state law, if a corporation undergoes an “ownership change,” which is generally defined as a greater than 50% change, by value, in its equity ownership over a three-year period, the corporation’s ability to use its pre-change net operating loss carryforwards and other pre-change tax attributes to offset its post-change income may be limited. We completed a Section 382 analysis and determined an ownership change occurred in 2014 and concluded that it had no impact on U.S. federal and California net operating losses or on U.S. federal research and development credits. Our initial public offering in November 2019 did not result in a change in ownership of greater than 50% under Section 382. We also had a follow-on offering on June 16, 2020, which resulted in greater than 50% change under Section 382. We completed an updated Section 382 analysis based on this new change event and determined that it will not prohibit us from eventually utilizing our carryforwards. We updated the Section 382 analysis through December 31, 2023 and concluded there have not been any additional ownership changes as defined under Section 382 since the June 16, 2020 follow-on offering. We may experience ownership changes in the future as a result of subsequent shifts in our stock ownership, some of which may be outside of our control. If we determine that an ownership change has occurred and our ability to use our historical net operating loss and tax credit carryforwards is materially limited, it would harm our future business, financial condition, and results of operations by effectively increasing our future tax obligations. In addition, under the Tax Act, federal NOLs incurred in 2018 and in future years may be carried forward indefinitely but generally may not be carried back and the deductibility of such NOLs is limited to 80% of taxable income. Under the Coronavirus Aid, Relief, and Economic Security Act, which was signed into law in 2020, an NOL from a tax year beginning in 2018, 2019 or 2020 can be carried back five years and would not be subject to the 80%-of-income limitation if they are exhausted during the five-year carryback period or during 2018, 2019 or 2020. The Company will not carry back any NOLs as they did not have taxable income in prior years.

Risks Related to Intellectual Property

Our failure to adequately protect our intellectual property rights could impair our ability to compete effectively or defend ourselves from litigation, which could harm our business, financial condition, and results of operations.

Our success depends, in part, on our ability to protect our intellectual property. We rely primarily on patent, copyright, trademark, and trade secret laws, as well as confidentiality and non-disclosure agreements, and other contractual protections, to protect our technologies and proprietary know-how, all of which offer only limited protection. The steps we have taken to protect our intellectual property rights may not be adequate to prevent the misappropriation, infringement, or other violation of our proprietary information or infringement of our intellectual property rights, and our ability to prevent such misappropriation, infringement, or other violation is uncertain, particularly in countries outside of the United States. As of March 31, 2024, we had 125 issued U.S. patents, expiring generally between 2026 and 2040 and 40 pending U.S. patent applications (including 13 provisional applications). We also had four foreign issued patents expiring in 2036 and four pending foreign patent applications. Our issued patents and pending patent applications generally relate to our MEMS fabrication process, MEMS resonators, circuits, packaging, and oscillator systems. We cannot assure you that any patents from any pending patent applications (or from any future patent applications) will be issued, and even if the pending patent applications are granted, the scope of the rights granted to us may not be meaningful or provide us with any commercial advantage. For example, these patents could be opposed, contested, circumvented, designed around by third parties, be narrowed or declared invalid or unenforceable in judicial or administrative proceedings including re-examination, inter partes review, post-grant review, interference and derivation proceedings and equivalent proceedings in foreign jurisdictions, or be subject to ownership claims by third parties. The failure of our patents to adequately protect our technology might make it easier for our competitors to offer similar products or technologies. Our foreign patent protection is less comprehensive than our U.S. patent protection and may not protect our intellectual property rights in some countries where our products are sold or may be sold in the future. Even if foreign patents are granted, effective enforcement in foreign countries may not be available. Further, we are currently unable to take advantage of selling our products online in certain countries where we do not own trademarks for our corporate name. Many U.S.-based companies have encountered substantial third-party intellectual property infringement in foreign countries, including countries where we sell products. If such an impermissible use of our intellectual property or trade secrets were to occur, our ability to sell our solutions at

45

competitive prices may be adversely affected and our business, financial condition, and results of operations could be adversely affected.

The legal standards relating to the validity, enforceability, and scope of protection of intellectual property rights are uncertain and evolving. We cannot assure you that others will not develop or patent similar or superior technologies or solutions, or that our patents, trademarks, and other intellectual property will not be challenged, invalidated, or circumvented by others.

We also have a license to certain patents from Bosch relating to the design and manufacture of MEMS-based timing applications. The patent rights obtained under the license agreement expire between 2021 and 2029, and the license agreement expires upon expiration of the last patent licensed under the agreement. We do not believe there will be any significant impact upon expiration of these patents.

We believe that the success of our business depends more on proprietary technology, information and processes, and know-how than on our patents or trademarks. Much of our proprietary information and technology related to manufacturing processes is not patented and may not be patentable.

Unauthorized copying or other misappropriation of our proprietary technologies could enable third parties to benefit from our technologies without paying us for doing so, which could harm our business. Monitoring unauthorized use of our intellectual property is difficult and costly. It is possible that unauthorized use of our intellectual property may have occurred or may occur without our knowledge. We cannot assure you that the steps we have taken will prevent unauthorized use of our intellectual property, or that others will not develop technologies similar or superior to our technology or design around our intellectual property. Our failure to effectively protect our intellectual property could reduce the value of our technology in licensing arrangements or in cross-licensing negotiations.

In addition, we also rely on contractual protections with our customers, suppliers, distributors, employees, and consultants, and we implement security measures designed to protect our trade secrets and know-how. However, we cannot assure you that we have entered into such agreements with every such party, that these contractual protections and security measures will not be breached, that we will have adequate remedies for any such breach, or that our customers, suppliers, distributors, employees, or consultants will not assert rights to intellectual property or damages arising out of such contracts.

We may in the future need to initiate infringement claims or litigation in order to try to protect or enforce our intellectual property rights. Litigation, whether we are a plaintiff or a defendant, can be expensive and time-consuming and may divert the efforts of our management and other personnel, which could harm our business, whether or not such litigation results in a determination favorable to us. Litigation also puts our patents at risk of being invalidated or interpreted narrowly and our patent applications at risk of not issuing. Additionally, any enforcement of our patents or other intellectual property may provoke third parties to assert counterclaims against us. If we are unable to meaningfully protect our proprietary rights or if third parties independently develop or gain access to our or similar technologies, our business, financial condition, results of operations, reputation, and competitive position could be harmed.

We may face intellectual property infringement, misappropriation, or other claims, which could be time-consuming and costly to defend or settle and which could result in the loss of significant rights and harm our relationships with our customers and distributors.

The semiconductor industry in which we operate is characterized by companies that hold patents and other intellectual property rights and vigorously pursue, protect, and enforce intellectual property rights. From time to time, third parties may assert against us and our customers and distributors their patent and other intellectual property rights to technologies that are important to our business. Any litigation, regardless of success or merit, could cause us to incur substantial expenses, reduce our sales, and divert the efforts of our management and other personnel. In the event we receive an adverse result in any litigation, we could be required to pay substantial damages, seek licenses from third parties, which may not be available on reasonable terms or at all, cease sale of products, expend significant resources to develop alternative technology, or discontinue the use of processes requiring the relevant technology.

In addition, our commercial success depends upon our ability to manufacture and sell our products without infringing, misappropriating, or otherwise violating the intellectual property rights of others. Claims that our products, processes, or technology infringe, misappropriate, or otherwise violate third-party intellectual property rights, regardless of their merit or resolution, could be costly to defend or settle and could divert the efforts and attention of our management and other personnel. We may in the future, particularly as a public company with an increased profile and visibility, receive communications from others alleging our infringement, misappropriation, or other violation of patents, trade secrets, or other intellectual property rights. We cannot assure you that, if made, these claims will not be successful, and lawsuits resulting from such allegations, even if we believe they are invalid, could subject us to significant liability for damages, invalidate our proprietary rights, and prevent us from selling specific products. Moreover, there could be public

46

announcements of the results of hearings, motions, or other interim proceedings or developments and if securities analysts or investors perceive these results to be negative, it could have a substantial adverse effect on the price of our common stock.

Intellectual property claims could also harm our relationships with our customers or distributors and might deter future customers from doing business with us. We do not know whether we will prevail in any such proceedings given the complex technical issues and inherent uncertainties in intellectual property litigation. If any future proceedings result in an adverse outcome, we could be required to:

•cease the manufacture, use or sale of the applicable products, processes, or technology;

•pay substantial damages for infringement by us or our customers;

•expend significant resources to develop non-infringing products, processes, or technology, which may not be successful;

•license technology from the third-party claiming infringement, which license may not be available on commercially reasonable terms, or at all;

•cross-license our technology to a competitor to resolve an infringement claim, which could weaken our ability to compete with that competitor;

•lose the opportunity to license our technology to others or to collect royalty payments based upon successful protection and assertion of our intellectual property rights against others; or

•pay substantial damages to our customers or end users to discontinue their use of or to replace infringing technology sold to them with non-infringing technology, if available.

Any of the foregoing results could adversely affect our business, financial condition, and results of operations.

Any potential dispute involving patents or other intellectual property could affect our customers, which could trigger our indemnification obligations to them and result in substantial expense to us.

In any potential dispute involving patents or other intellectual property, our customers could also become the target of litigation. Our agreements with customers and other third-parties generally include indemnification or other provisions under which we agree to indemnify or otherwise be liable to them for losses suffered or incurred as a result of claims of intellectual property infringement, damages caused by us to property or persons, or other liabilities relating to or arising from our solutions included in their products. Large indemnity payments or damage claims from contractual breach could harm our business, financial condition, and results of operations. From time to time, customers may require us to indemnify or otherwise be liable to them for breach of confidentiality or failure to implement adequate security measures with respect to their intellectual property and trade secrets. Although we normally contractually limit our liability with respect to such obligations, we may still incur substantial liability related to them. Any litigation against our customers could trigger technical support and indemnification obligations under some of our agreements, which could result in substantial expense to us.

In addition, other customers, or end customers with whom we do not have formal agreements requiring us to indemnify them may ask us to indemnify them if a claim is made as a condition to awarding future design wins to us. Because some of our customers are larger than we are and have greater resources than we do, they may be more likely to be the target of an infringement claim by third parties than we would be, which could increase our chances of becoming involved in a future lawsuit. If any such claims were to succeed, we might be forced to pay damages on behalf of our customers that could increase our expenses, disrupt our ability to sell our solutions and reduce our revenue and profit. Any dispute with a customer with respect to such obligations could have adverse effects on our relationship with that customer and other current and prospective customers and reduce demand for our solutions. In addition to the time and expense required for us to supply support or indemnification to our customers, any such litigation could severely disrupt or shut down the business of our customers, which in turn could hurt our relations with our customers and cause the sale of our products to decrease. Any of the foregoing could harm our business, financial condition, and results of operations.

Risks Related to MegaChips Corporation’s Ownership Position in Our Common Stock

As long as MegaChips holds a significant amount of our stock, our other shareholders’ ability to influence matters requiring stockholder approval will be limited.

MegaChips owns 4,250,000 shares of our common stock, representing approximately 18.6% of our outstanding common stock as of March 31, 2024. For so long as MegaChips or its successors in interest continue to hold the largest ownership position in our outstanding common stock, we expect MegaChips to continue to hold at least one out of eight seats on our

47

board of directors, and to be influential in electing members of our board of directors. As long as MegaChips continues to be our largest stockholder, it will continue to have significant influence over us.

For example, as long as MegaChips continues to hold a significant or the largest ownership position in our outstanding common stock, MegaChips may have the ability to affect the outcome of any stockholder vote during this period. As a result, MegaChips will have the ability to exert significant influence over many matters affecting us, either through its board representative or as a stockholder, including:

•determinations with respect to our business plans and policies, including the appointment and removal of our officers;

•any determinations with respect to mergers and other business combinations;

•our acquisition or disposition of assets;

•our financing activities;

•the allocation of business opportunities that may be suitable for us and MegaChips;

•the payment of dividends on our common stock; and

•the number of shares available for issuance under our stock plans.

MegaChips’ significant ownership position may discourage transactions involving a change of control of us, including transactions in which other holders of our common stock might otherwise receive a premium for their shares over the then current market price. In addition, as a result of this voting control and representations on our board of directors, persons who we would like to invite to join our board of directors may decline to do so.

Our inability to resolve any disputes that arise between us and MegaChips with respect to our past and ongoing relationships may adversely affect our operating results.

Disputes may arise between MegaChips and us in a number of areas relating to our past and ongoing relationships, including:

•sales or distributions by MegaChips of all or any portion of its ownership interest in us; and

•business opportunities that may be attractive to both MegaChips and us.

We may not be able to resolve any potential conflicts, and even if we do, the resolution may be less favorable than if we were dealing with an unaffiliated party.

We have entered into an integration and purchase agreement with MegaChips for the sale of resonators by us to MegaChips. The agreements we entered into with MegaChips may be amended upon agreement between the parties. Because MegaChips is a major stockholder with representatives on our board of directors, we may not have the leverage to negotiate amendments to these agreements on terms as favorable to us compared to those we would negotiate with an unaffiliated third party.

There could be potential conflicts of interest between us and affiliates of MegaChips, which could impact our business and operating results.

Some of our directors have or had affiliations with MegaChips. Affiliations of directors with MegaChips could create, or appear to create, conflicts of interest with respect to matters involving both us and MegaChips. For example, corporate opportunities may arise that concern both of our businesses, such as the potential acquisition of a particular business or technology that is complementary to both of our businesses. Our Board has adopted a Related Persons Transactions Policy to address actual or perceived conflicts of interest of directors, officers and greater than 5% stockholders on a case-by-case basis. If any corporate opportunity arises and if our directors and officers do not pursue it on our behalf, we may not become aware of, and may potentially lose, a significant business opportunity.

Risks Related to Our Common Stock

Substantial future sales of our common stock could cause the market price of our common stock to decline.

The market price of our common stock could decline as a result of substantial sales of our common stock, particularly sales by our directors, executive officers, and significant stockholders, including MegaChips, or the perception in the market that holders of a large number of shares intend to sell their shares.

48

Anti-takeover provisions in our charter documents and under Delaware law could make an acquisition of us more difficult, limit attempts by our stockholders to replace or remove our current management and limit the market price of our common stock.

Provisions in our certificate of incorporation and bylaws may have the effect of delaying or preventing a change of control or changes in our management. Our amended and restated certificate of incorporation and bylaws include provisions that:

•authorize our board of directors to issue, without further action by the stockholders, shares of undesignated preferred stock with terms, rights, and preferences determined by our board of directors that may be senior to our common stock;

•require that any action to be taken by our stockholders be effected at a duly called annual or special meeting and not by written consent;

•specify that special meetings of our stockholders can be called only by our board of directors, the Chairman of our board of directors, or our Chief Executive Officer;

•establish an advance notice procedure for stockholder proposals to be brought before an annual meeting, including proposed nominations of persons for election to our board of directors;

•establish that our board of directors is divided into three classes, with each class serving three-year staggered terms;

•prohibit cumulative voting in the election of directors;

•provide that our directors may be removed only for cause;

•provide that vacancies on our board of directors may be filled by a majority of directors then in office, even if less than a quorum; and

•require the approval of our board of directors or the holders of at least 66 2/3% of our outstanding shares of capital stock to amend our bylaws and certain provisions of our certificate of incorporation.

These provisions may frustrate or prevent any attempts by our stockholders to replace or remove our current management by making it more difficult for stockholders to replace members of our board of directors, which is responsible for appointing the members of our management. In addition, because we are incorporated in Delaware, we are governed by the provisions of Section 203 of the Delaware General Corporation Law, which generally prohibits a Delaware corporation from engaging in any of a broad range of business combinations with any interested stockholder for a period of three years following the date on which the stockholder became an interested stockholder. Any delay or prevention of a change of control transaction or changes in our management could cause our stock price to decline.

Our bylaws designate the Court of Chancery of the State of Delaware as the sole and exclusive forum for certain types of actions and proceedings that may be initiated by our stockholders, and federal district courts will be the sole and exclusive forum for Securities Act claims, which could limit our stockholders’ ability to obtain what they believe to be a favorable judicial forum for disputes with us or our directors, officers, or other employees.

Our bylaws provide that, unless we consent in writing to the selection of an alternative forum, to the fullest extent permitted by law, the Court of Chancery of the State of Delaware shall be the sole and exclusive forum for (a) any derivative action or proceeding brought on our behalf, (b) any action asserting a claim of breach of a fiduciary duty owed by any of our directors, officers, or other employees to us or our stockholders, (c) any action asserting a claim arising pursuant to any provision of the Delaware General Corporation Law, our certificate of incorporation or our bylaws, or (d) any action asserting a claim against us governed by the internal affairs doctrine. Section 27 of the Securities Exchange Act of 1934, or the Exchange Act, creates exclusive federal jurisdiction over all suits brought to enforce any duty or liability created by the Exchange Act or the rules and regulations thereunder. As a result, the exclusive forum provision will not apply to suits brought to enforce any duty or liability created by the Exchange Act or any other claim for which the federal courts have exclusive jurisdiction. Our bylaws further provide that, unless we consent in writing to the selection of an alternative forum, the federal district courts are the sole and exclusive forum for the resolution of any complaint asserting a cause of action arising under the Securities Act.

Any person or entity purchasing or otherwise acquiring any interest in our capital stock shall be deemed to have notice of and consented to the provisions of our bylaws described above. This choice of forum provision may limit a stockholder’s ability to bring a claim in a judicial forum that it finds favorable for disputes with us or our directors, officers, or other employees, which may discourage such lawsuits against us and our directors, officers, or other employees. Alternatively, if

49

a court were to find these provisions of our bylaws inapplicable to, or unenforceable in respect of, one or more of the specified types of actions or proceedings, we may incur additional costs associated with resolving such matters in other jurisdictions, which could adversely affect our business, financial condition, and results of operations and result in a diversion of the time and resources of our management and board of directors.

Our stock price may be volatile and may decline, resulting in a loss of some or all of our stockholder investment.

The trading price and volume of our common stock is likely to be volatile and could fluctuate significantly in response to numerous factors, many of which are beyond our control, including:

•macroeconomic conditions,

•actual or anticipated fluctuations in our results of operations due to, among other things, changes in customer demand, product life cycles, pricing, ordering patterns, and unforeseen operating costs;

•the financial projections we may provide to the public, any changes in these projections, or our failure to meet these projections;

•failure of securities analysts to initiate or maintain coverage of us, changes in financial estimates or ratings by any securities analysts who follow us, or our failure to meet these estimates or the expectations of investors;

•announcements by our significant customers of changes to their product offerings, business plans, or strategies;

•announcements by us or our competitors of significant technical innovations, acquisitions, strategic partnerships, joint ventures, or capital commitments;

•changes in operating performance and stock market valuations of other technology companies generally, or those in the semiconductor industry;

•timing and seasonality of the end-market demand;

•cyclical fluctuations in the semiconductor market;

•price and volume fluctuations in the overall stock market from time to time, including as a result of trends in the economy as a whole;

•actual or anticipated developments in our business or our competitors’ businesses or the competitive landscape generally;

•new laws or regulations or new interpretations of existing laws or regulations applicable to our business;

•any major change in our management;

•lawsuits threatened or filed against us; and

•other events or factors, including those resulting from geopolitical activities, war, incidents of terrorism, natural disasters, pandemics, or responses to these events.

In addition, the market for technology stocks and the stock markets in general have experienced extreme price and volume fluctuations. Stock prices of many technology companies have fluctuated in a manner unrelated or disproportionate to the operating performance of those companies. In the past, stockholders have instituted securities class action litigation following periods of market volatility. If we were to become involved in securities litigation, it could subject us to substantial costs, divert resources and the attention of management from our business, and adversely affect our business, financial condition, and results of operations.

Item 5. Other Information.

Trading Arrangements

During the quarter ended March 31, 2024, the Company’s following officer (as defined in Rule 16a-1(f) under the Exchange Act) adopted or terminated a “Rule 10b5-1 trading arrangement” (as defined in Item 408(a) of Regulation S-K of the Exchange Act) described below:

On March 15, 2024, Samsheer Ahmad, Senior Vice President, Finance and Chief Accounting Officer, adopted a trading arrangement intended to satisfy the affirmative defense conditions of Rule 10b5-1(c) of the Exchange Act. Mr. Ahmad's

50

trading arrangement provides for the sale through December 31, 2024 of upto 12,000 shares of common stock of the Company. Mr. Ahmad's trading arrangement terminates on the earlier of: (i) December 31, 2024, (ii) the first date on which all trades set forth in the trading arrangement have been executed, or (iii) such date the trading arrangement is otherwise terminated according to its terms.

51

Item 6. Exhibits.

The documents listed below are filed (or furnished, as noted) as exhibits to this Quarterly Report on Form 10-Q:

Exhibit Number	Description
3.1	Restated Certificate of Incorporation of SiTime Corporation (the “Company”) (incorporated by reference to Exhibit 3.1 to the Company’s Current Report on Form 8-K filed November 26, 2019).
3.2	Amended and Restated Bylaws of the Company (incorporated by reference to Exhibit 3.2 to the Company’s Current Report on Form 8-K filed June 29, 2021).
4.1	Form of Common Stock Certificate of the Company (incorporated by reference to Exhibit 4.1 to the Company’s Registration Statement on Form S-1 (File No. 333-234305)).
4.2	Description of Securities Registered Pursuant to Section 12 of the Securities Exchange Act of 1934 (incorporated by reference to the Company’s Annual Report on Form 10-K filed February 16, 2021).
10.1	Sales Agreement dated February 27, 2024 between the Company and Stifel, Nicolaus & Company, Incorporated (incorporated by reference to Exhibit 1.1 to the Company’s Current Report on Form 8-K filed February 27, 2024).
31.1*	Certification of Principal Executive Officer Pursuant to Rules 13a-14(a) and 15d-14(a) under the Securities Exchange Act of 1934, as Adopted Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
31.2*	Certification of Principal Financial Officer Pursuant to Rules 13a-14(a) and 15d-14(a) under the Securities Exchange Act of 1934, as Adopted Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
32.1*#	Certification of Principal Executive Officer Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
32.2*#	Certification of Principal Financial Officer Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
101.INS*	Inline XBRL Instance - the instance document does not appear in the Interactive Data File because its XBRL tags are embedded within the Inline XBRL document.
101.SCH*	Inline XBRL Taxonomy Extension Schema Document
101.CAL*	Inline XBRL Taxonomy Extension Calculation Linkbase Document
101.DEF*	Inline XBRL Taxonomy Extension Definition Linkbase Document
101.LAB*	Inline XBRL Taxonomy Extension Label Linkbase Document
101.PRE*	Inline XBRL Taxonomy Extension Presentation Linkbase Document
104	Cover Page Interactive Data File (formatted as Inline XBRL and contained in Exhibit 101)

____________________________________

*Filed herewith.

#In accordance with Item 601(b)(32)(ii) of Regulation S‑K and SEC Release No. 34‑47986, the certifications furnished in Exhibits 32.1 and 32.2 hereto are deemed to accompany this Form 10‑Q and will not be deemed “filed” for purposes of Section 18 of the Exchange Act or deemed to be incorporated by reference into any filing under the Exchange Act or the Securities Act of 1933 except to the extent that the Company specifically incorporates it by reference.

52

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

	SiTime Corporation
Date: May 9, 2024	By:	/s/ Elizabeth A. Howe
		Elizabeth A. Howe Executive Vice President, Chief Financial Officer
		(Duly Authorized Officer and Principal Financial Officer)

53

EX-31.1

Exhibit 31.1

Certification Pursuant to Rule 13a-14(a) and Rule 15d-14(a)

of the Securities Exchange Act of 1934

I, Rajesh Vashist, certify that:

1.I have reviewed this Quarterly Report on Form 10-Q of SiTime Corporation.;

2.Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

3.Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

4.The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

(a)designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

(b)designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

(c)evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

(d)disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

5.The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):

(a)all significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and

(b)any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.

Date: May 9, 2024
	/s/ Rajesh Vashist
	Rajesh Vashist Chief Executive Officer

EX-31.2

Exhibit 31.2

Certification Pursuant to Rule 13a-14(a) and Rule 15d-14(a)

of the Securities Exchange Act of 1934

I, Elizabeth A. Howe, certify that:

1.I have reviewed this Quarterly Report on Form 10-Q of SiTime Corporation.;

2.Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

3.Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

4.The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

(a)designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

(b)designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

(c)evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

(d)disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

5.The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):

(a)all significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and

(b)any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.

Date: May 9, 2024
	/s/ Elizabeth A. Howe
	Elizabeth A. Howe Executive Vice President, Chief Financial Officer

EX-32.1

Exhibit 32.1

CERTIFICATION PURSUANT TO 18 USC SECTION 1350,

AS ADOPTED PURSUANT TO

SECTION 906 OF THE SARBANES-OXLEY ACT OF 2002

In connection with the Quarterly Report of SiTime Corporation. (the “Company”) on Form 10-Q for the period ended March 31, 2024 as filed with the Securities and Exchange Commission on the date hereof (the “Report”), I, certify, pursuant to 18 U.S.C. § 1350, as adopted pursuant to § 906 of the Sarbanes-Oxley Act of 2002, that to the best of my knowledge:

(1)The Report fully complies with the requirements of section 13(a) or 15(d) of the Securities Exchange Act of 1934; and

(2)The information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.

Date: May 9, 2024
	/s/ Rajesh Vashist
	Rajesh Vashist Chief Executive Officer

EX-32.2

Exhibit 32.2

CERTIFICATION PURSUANT TO 18 U.S.C. SECTION 1350,

AS ADOPTED PURSUANT TO

SECTION 906 OF THE SARBANES-OXLEY ACT OF 2002

In connection with the Quarterly Report of SiTime Corporation. (the “Company”) on Form 10-Q for the period ended March 31, 2024 as filed with the Securities and Exchange Commission on the date hereof (the “Report”), I, certify, pursuant to 18 U.S.C. § 1350, as adopted pursuant to § 906 of the Sarbanes-Oxley Act of 2002, that to the best of my knowledge:

(1)The Report fully complies with the requirements of section 13(a) or 15(d) of the Securities Exchange Act of 1934; and

(2)The information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.

Date: May 9, 2024
	/s/ Elizabeth A. Howe
	Elizabeth A. Howe Executive Vice President, Chief Financial Officer

XML

Cover Page - shares	3 Months Ended
	Mar. 31, 2024	May 01, 2024
Cover [Abstract]
Document Type	10-Q
Document Quarterly Report	true
Document Period End Date	Mar. 31, 2024
Document Transition Report	false
Entity File Number	001-39135
Entity Registrant Name	SiTime Corporation
Entity Incorporation, State or Country Code	DE
Entity Tax Identification Number	02-0713868
Entity Address, Address Line One	5451 Patrick Henry Drive
Entity Address, City or Town	Santa Clara
Entity Address, State or Province	CA
Entity Address, Postal Zip Code	95054
City Area Code	408
Local Phone Number	328-4400
Title of 12(b) Security	Common Stock, $0.0001 par value per share
Trading Symbol	SITM
Security Exchange Name	NASDAQ
Entity Current Reporting Status	Yes
Entity Interactive Data Current	Yes
Entity Filer Category	Large Accelerated Filer
Entity Small Business	false
Entity Emerging Growth Company	false
Entity Shell Company	false
Entity Common Stock Shares Outstanding		22,871,540
Entity Central Index Key	0001451809
Current Fiscal Year End Date	--12-31
Document Fiscal Year Focus	2024
Document Fiscal Period Focus	Q1
Amendment Flag	false

XML

Condensed Consolidated Balance Sheets - USD ($) $ in Thousands	Mar. 31, 2024	Dec. 31, 2023
Current assets:
Cash and cash equivalents	$ 96,275	$ 9,468
Short-term investments in held-to-maturity securities	421,006	518,733
Accounts receivable, net	16,774	21,861
Inventories	74,376	65,539
Prepaid expenses and other current assets	9,744	7,641
Total current assets	618,175	623,242
Property and equipment, net	53,394	54,685
Intangible assets, net	175,236	177,079
Right-of-use assets, net	7,582	8,262
Goodwill	87,098	87,098
Other assets	1,138	1,317
Total assets	942,623	951,683
Current liabilities:
Accounts payable	10,790	8,690
Accrued expenses and other current liabilities	108,607	112,704
Total current liabilities	119,397	121,394
Other non-current liabilities	127,016	122,237
Total liabilities	246,413	243,631
Commitments and contingencies (Note 9)
Stockholders’ equity:
Common stock, $0.0001 par value - 200,000 shares authorized; 22,872 and 22,692 shares issued and outstanding at March 31, 2024 and December 31, 2023	2	2
Additional paid-in capital	813,312	796,450
Accumulated deficit	(117,104)	(88,400)
Total stockholders’ equity	696,210	708,052
Total liabilities and stockholders’ equity	$ 942,623	$ 951,683

XML

Condensed Consolidated Balance Sheets (Parenthetical) - $ / shares shares in Thousands	Mar. 31, 2024	Dec. 31, 2023
Statement of Financial Position [Abstract]
Common stock, par value (in dollars per share)	$ 0.0001	$ 0.0001
Common stock, shares authorized (in shares)	200,000	200,000
Common stock, shares issued (in shares)	22,872	22,692
Common stock, shares outstanding (in shares)	22,872	22,692

XML

Condensed Consolidated Statements Of Operations And Comprehensive Loss - USD ($) shares in Thousands, $ in Thousands	3 Months Ended
	Mar. 31, 2024	Mar. 31, 2023
Income Statement [Abstract]
Revenue	$ 33,022	$ 38,343
Cost of revenue	15,361	15,302
Gross profit	17,661	23,041
Operating expenses:
Research and development	25,544	24,457
Selling, general and administrative	23,913	20,733
Acquisition related costs	3,242	0
Total operating expenses	52,699	45,190
Loss from operations	(35,038)	(22,149)
Interest income	6,560	5,629
Other income (expense), net	(213)	100
Loss before income taxes	(28,691)	(16,420)
Income tax expense	(13)	(70)
Net loss	(28,704)	(16,490)
Net loss attributable to common stockholders and comprehensive loss	$ (28,704)	$ (16,490)
Net loss per share attributable to common stockholders, basic (in dollars per share)	$ (1.26)	$ (0.76)
Net loss per share attributable to common stockholders, diluted (in dollars per share)	$ (1.26)	$ (0.76)
Weighted-average shares used to compute basic net loss per share (in shares)	22,765	21,794
Weighted-average shares used to compute diluted net loss per share (in shares)	22,765	21,794

XML

Condensed Consolidated Statements Of Stockholders' Equity - USD ($) shares in Thousands, $ in Thousands	Total	Common Stock	Additional Paid-in Capital	Accumulated Deficit
Beginning balance (in shares) at Dec. 31, 2022		21,702
Beginning balance at Dec. 31, 2022	$ 708,480	$ 2	$ 716,343	$ (7,865)
Increase (Decrease) in Stockholders' Equity [Roll Forward]
Stock-based compensation expense	19,136		19,136
Net income (loss)	(16,490)			(16,490)
Issuance of common stock in connection with At-The-Marker offering net of underwriting discounts and commissions and other offerings costs (in shares)		100
Issuance of common stock in connection with At-The-Market offering net of underwriting discounts and commissions and other offering costs	12,749		12,749
Issuance of shares upon vesting of restricted stock units, net of tax withholdings (in shares)		150
Issuance of shares upon vesting of restricted stock units, net of tax withholdings	(10,215)		(10,215)
Ending balance (in shares) at Mar. 31, 2023		21,952
Ending balance at Mar. 31, 2023	$ 713,660	$ 2	738,013	(24,355)
Beginning balance (in shares) at Dec. 31, 2023	22,692	22,692
Beginning balance at Dec. 31, 2023	$ 708,052	$ 2	796,450	(88,400)
Increase (Decrease) in Stockholders' Equity [Roll Forward]
Stock-based compensation expense	22,894		22,894
Net income (loss)	(28,704)			(28,704)
Issuance of common stock in connection with At-The-Marker offering net of underwriting discounts and commissions and other offerings costs (in shares)		33
Issuance of common stock in connection with At-The-Market offering net of underwriting discounts and commissions and other offering costs	2,706		2,706
Issuance of shares upon vesting of restricted stock units, net of tax withholdings (in shares)		147
Issuance of shares upon vesting of restricted stock units, net of tax withholdings	$ (8,738)		(8,738)
Ending balance (in shares) at Mar. 31, 2024	22,872	22,872
Ending balance at Mar. 31, 2024	$ 696,210	$ 2	$ 813,312	$ (117,104)

XML

Condensed Consolidated Statements Of Cash Flows - USD ($) $ in Thousands	3 Months Ended
	Mar. 31, 2024	Mar. 31, 2023
Cash flows from operating activities:
Net loss	$ (28,704)	$ (16,490)
Adjustments to reconcile net loss to net cash provided by operating activities
Depreciation and amortization expense	5,601	3,824
Stock-based compensation expense	21,703	18,536
Net change in unrealized interest on held to maturity securities	3,589	212
Change in fair value of sales based earnout liability	1,041	0
Change in fair value of acquisition consideration payable	1,585	0
Inventory write-down	826	771
Changes in assets and liabilities:
Accounts receivable, net	5,087	19,765
Inventories	(9,182)	(3,132)
Prepaid expenses and other assets	(1,923)	(2,895)
Accounts payable	2,591	(6,430)
Accrued expenses and other liabilities	(485)	(2,212)
Net cash provided by operating activities	1,729	11,949
Cash flows from investing activities
Purchase of held to maturity securities	(294,393)	(379,543)
Proceeds from maturity of held to maturity securities	388,531	371,007
Purchase of property and equipment	(2,907)	(2,094)
Cash paid for intangibles	(121)	(191)
Net cash provided by (used in) investing activities	91,110	(10,821)
Cash flows from financing activities
Tax withholding paid on behalf of employees for net share settlement	(8,738)	(10,215)
Proceeds from public offering	3,009	13,119
Payments for offering costs	(303)	(370)
Net cash provided by (used in) financing activities	(6,032)	2,534
Net increase in cash and cash equivalents	86,807	3,662
Cash and cash equivalents
Beginning of period	9,468	34,603
End of period	96,275	38,265
Supplemental disclosure of cash flow information
Income taxes paid	12	104
Supplemental disclosure of noncash investing and financing activities
Unpaid property and equipment	$ 375	$ 486

XML

The Company and Basis of Presentation

3 Months Ended

Mar. 31, 2024

Accounting Policies [Abstract]

The Company and Basis of Presentation

The Company and Basis of Presentation

SiTime Corporation (the “Company”) was incorporated in the State of Delaware in December 2003. The Company is a leading provider of Precision Timing solutions to the global electronics industry, providing the timing functionality that is needed for electronics to operate reliably and correctly. The Company's products have been designed to address a wide range of applications across a broad array of end markets. The Company operates a fabless business model and leverages its global network of distributors to address the broad set of end markets that it serves.

The accompanying interim condensed consolidated financial statements have been prepared in conformity with United States (U.S.) generally accepted accounting principles (GAAP) for interim financial information and the instructions to Form 10-Q and Article 10 of Regulation S-X, and should be read in conjunction with the Company's audited consolidated financial statements and related notes thereto filed with the U.S. Securities and Exchange Commission (SEC) on Form 10-K for the fiscal year ended December 31, 2023. The interim financial statements are unaudited, but reflect all adjustments which are, in the opinion of management, of a normal, recurring nature necessary to provide a fair statement of results for the interim periods presented. The results of operations for the interim periods shown in this report are not necessarily indicative of the results that may be expected for the fiscal year ending December 31, 2024, for any future year, or for any other future interim period.

The preparation of financial statements in conformity with U.S. GAAP requires management to make estimates and assumptions that affect the amounts reported in the financial statements and accompanying notes. Actual results could differ from those estimates.

Principles of Consolidation

The condensed consolidated financial statements include the accounts of the Company and its wholly-owned subsidiaries. All intercompany transactions and balances have been eliminated in consolidation.

Significant Accounting Policies

The Company’s significant accounting policies are disclosed in the Company’s audited consolidated financial statements and related notes thereto included in the Annual Report on Form 10-K for the year ended December 31, 2023. There have been no changes to these accounting policies through March 31, 2024.

Recent Accounting Pronouncements

There are currently no new accounting pronouncements with a future effective date that are considered material, or could be material, to us.

XML

Acquisitions

3 Months Ended

Mar. 31, 2024

Business Combination and Asset Acquisition [Abstract]

Acquisitions

Acquisitions

On December 1, 2023, we completed our acquisition of Aura's timing business and clock products, and an assembled workforce. The acquisition qualified as a business combination in accordance with ASC 805, Business Combinations and, accordingly, total consideration was first allocated to the fair value of assets acquired as of the date of acquisition, with the excess being recorded as goodwill. The acquisition date fair value of the purchase consideration was $259.2 million, which comprised the following:

	Estimated Fair Value
	(in thousands)
Fixed consideration	$	139,946
Fair value of sales based earnout liability	102,278
Settlement of pre-existing arrangement	16,974
Total purchase consideration	$	259,198

The preliminary purchase consideration allocation to the assets acquired based on their respective estimated fair values as of the date of acquisition is as follows:

	Estimated Fair Value (Preliminary)		Estimated Useful Life	Financial Statement Line Item
	(in thousands)		(in years)
Developed Technology	$	96,700	5 to 8 years	Intangible assets, net
In-process research and development	69,500		Indefinite	Intangible assets, net
Assumed customer agreements	5,900		4 years	Intangible assets, net
Goodwill	87,098		Indefinite	Goodwill
Total assets acquired	$	259,198

Following are the supplemental consolidated financial results of the Company on an unaudited pro forma basis, as if the acquisition had been consummated on January 1, 2023:

	Three Months Ended March 31,
Unaudited pro forma information	2024		2023
	(in thousands)
Revenue	$	33,022	$	38,743
Net loss	$	(28,705)	$	(27,085)

The supplemental pro forma information presents the combined results of operations for the three months ended March 31, 2024 and 2023, as if the acquisition was completed on January 1, 2023, the first day of the fiscal year of 2023. The supplemental pro forma financial information presented above is not necessarily indicative of the financial position or results of operations that would have been realized if the acquisition had been completed on the date indicated. The supplemental pro forma financial information does not reflect synergies that might have been achieved, nor is it indicative of future operating results or financial position. The proforma financial information includes a $6.5 million nonrecurring adjustment related to acquisition costs.

XML

Fair Value Measurements

3 Months Ended

Mar. 31, 2024

Fair Value Disclosures [Abstract]

Fair Value Measurements

Fair Value Measurements

Cash equivalents

At March 31, 2024 and December 31, 2023, highly liquid money market funds of $93.7 million and $0.4 million, respectively, were valued using Level 1 of the fair value hierarchy, quoted prices in active markets for identical assets, and are included in cash equivalents.

Short-term investments in held-to-maturity securities

As of March 31, 2024 and December 31, 2023, the Company had purchased Treasury Bills with maturities ranging from 3 to 12 months, which the Company intends to hold until maturity and has classified as held-to-maturity securities. The held-to-maturity securities are recorded at amortized cost totaling $421.0 million including gross accrued interest of $5.3 million as of March 31, 2024. As of March 31, 2024, the fair value and gross unrealized loss on the held-to-maturity securities was $420.6 million and $0.4 million respectively.

As of December 31, 2023, the amortized cost of the held-to-maturity securities totaled $518.7 million including gross accrued interest of $8.9 million. As of December 31, 2023, the fair value and gross unrealized loss on the held-to-maturity securities $519.0 million and $0.3 million respectively.

These treasury bills were valued using Level 1 of the fair value hierarchy, quoted prices in active markets for identical assets, and are included in short-term investments. The carrying value of our investments is reviewed quarterly for changes in circumstances or the occurrence of events that suggests an investment may not be fully recoverable.

Sales based earnout liability

The estimated fair value of the sales based earnout liability is determined using a Monte Carlo simulation model using significant unobservable fair value inputs and is therefore classified as a Level 3 measurement. The assumptions used in the calculation are based on the revenue projections over the term of the contingent earn-out period, expected volatility, and discount rate. The estimates of fair value are uncertain and changes in any of the estimated inputs used will result in significant adjustments to the fair value. As of March 31, 2024, the Company used a volatility rate of 20%, discount rate ranging from 4.2% to 5.4%, and an expected term ranging from 0.13 years to 4.63 years.

The following table sets forth a summary of the changes in the fair value of the Company’s Level 3 financial liabilities:

	Amount
Fair value as of January 1, 2024	$	103,461
Change in the fair value during the year	1,041
Fair value as of March 31, 2024	$	104,502

There were no transfers between Level 1, Level 2, and Level 3 categories during any of the periods presented.

XML

Balance Sheets Components

3 Months Ended

Mar. 31, 2024

Balance Sheet Related Disclosures [Abstract]

Balance Sheets Components

Balance Sheet Components

Accounts Receivable, net

Accounts receivable, net consisted of the following:

	As of
	March 31, 2024		December 31, 2023		December 31, 2022
	(in thousands)
Accounts receivable, gross	$	16,824	$	21,911	$	41,279
Allowance for credit losses	(50)		(50)		(50)
Accounts receivable, net	$	16,774	$	21,861	$	41,229

Inventories

Inventories consisted of the following:

	As of
	March 31, 2024		December 31, 2023
	(in thousands)
Raw materials	$	24,066	$	17,550
Work in progress	35,248		35,193
Finished goods	15,062		12,796
Total inventories	$	74,376	$	65,539

Prepaid Expenses and Other Current Assets

Prepaid expenses and other current assets consisted of the following:

	As of
	March 31, 2024		December 31, 2023
	(in thousands)
Prepaid expenses	$	3,309	$	3,563
Other current assets	6,435		4,078
Total prepaid expenses and other current assets	$	9,744	$	7,641

Property and Equipment, net

Property and equipment, net consisted of the following:

	As of
	March 31, 2024		December 31, 2023
	(in thousands)
Lab and manufacturing equipment	$	85,422	$	80,772
Computer equipment	3,577		3,541
Furniture and fixtures	1,002		969
Construction in progress	3,429		5,978
Leasehold improvements	7,833		7,847
	101,263		99,107
Accumulated depreciation	(47,869)		(44,422)
Total property and equipment, net	$	53,394	$	54,685

Depreciation expense related to property and equipment was $3.6 million and $3.2 million for the three months ended March 31, 2024 and 2023, respectively.

Intangible Assets, net

Intangible assets, net consisted of the following:

	As of
	March 31, 2024						December 31, 2023
	(in thousands)
	Gross Assets		Accumulated Amortization		Net Assets		Gross Assets		Accumulated Amortization		Net Assets
Developed technology	$	96,700	$	(1,073)	$	95,627	$	96,700	$	(159)	$	96,541
Contract based royalty asset	$	5,900	$	(492)	$	5,408	$	5,900	$	(121)	$	5,779
Internal use software	$	9,434	$	(9,334)	$	100	$	9,434	$	(9,234)	$	200
Purchased software	15,227		(10,626)		4,601		15,110		(10,051)		5,059
Total amortizable intangible assets	$	127,261	$	(21,525)	$	105,736	$	127,144	$	(19,565)	$	107,579
In-process research and development	$	69,500	$	—	$	69,500	$	69,500	$	—	$	69,500
Total intangible assets	$	196,761	$	(21,525)	$	175,236	$	196,644	$	(19,565)	$	177,079

Amortization expense for intangible assets was $2.0 million and $0.6 million for the three months ended March 31, 2024 and 2023, respectively.

The estimated aggregate future amortization expense for intangible assets subject to amortization as of March 31, 2024 is summarized as below:

	(in thousands)
2024 (remainder)	$	12,030
2025	15,328
2026	14,986
2027	14,624
2028	12,912
2029 and beyond	35,856
	$	105,736

Accrued Expenses and Other Current Liabilities

Accrued expenses and other current liabilities consisted of the following:

	As of
	March 31, 2024		December 31, 2023
	(in thousands)
Accrued payroll and related benefits	$	5,782	$	6,358
Revenue reserves	2,585		2,954
Sales based earnout liability, current	16,772		19,733
Acquisition consideration payable, current	76,245		75,695
Deferred non-recurring engineering services	617		978
Short term lease liability	2,531		2,601
Accrued customer rebates	238		238
Other accrued expenses	3,837		4,147
Total accrued expenses and other current liabilities	$	108,607	$	112,704

The Company recorded reductions to research and development expenses related to non-recurring engineering service arrangements in the condensed consolidated statements of operations of $0.4 million and $1.2 million during the three months ended March 31, 2024 and 2023, respectively.

Other Non-current Liabilities

Other non-current liabilities consisted of the following:

	As of
	March 31, 2024		December 31, 2023
	(in thousands)
Sales based earnout liability, non-current	$	87,730	$	83,728
Acquisition consideration payable, non-current	34,500		33,086
Long term lease liability	4,786		5,423
Total other non-current liabilities	$	127,016	$	122,237

XML

Leases

3 Months Ended

Mar. 31, 2024

Leases [Abstract]

Leases

Leases

The Company leases real estate property under operating leases. The Company leases office space in California, Michigan, Malaysia, Japan, Taiwan, the Netherlands, Finland, Ukraine, and India, all under non-cancellable operating leases with various expiration dates through May 2029.

The remaining lease terms vary from a few months to 6 years. For certain of its leases the Company has options to extend the lease term for periods varying from one to five years. These renewal options are not considered in the remaining lease term unless it is reasonably certain that the Company will exercise such options. The Company also has variable lease payments that are primarily comprised of common area maintenance and utility charges.

The table below presents the lease-related assets and liabilities recorded on the condensed consolidated balance sheets as of March 31, 2024 and December 31, 2023:

	As of
	March 31, 2024			December 31, 2023
	(in thousands)
Right-of-use assets	$	7,582		$	8,262
Lease liabilities included in accrued expenses and other current liabilities	2,531			2,601
Lease liabilities included in other non-current liabilities	4,786			5,423
Total operating lease liabilities	$	7,317		$	8,024
Weighted-average remaining lease term (years)	2.9			3.1
Weighted-average discount rate	4.5		%	4.5		%

The table below presents certain information related to the lease costs for operating leases for the three months ended March 31, 2024 and 2023:

	Three Months Ended March 31,
	2024		2023
	(in thousands)
Operating lease cost	$	748	$	759
Short-term lease cost	177		177
Variable lease cost	316		264
Total lease cost	$	1,241	$	1,200

Cash paid for operating lease liabilities was $0.8 million and $0.7 million for the three months ended March 31, 2024 and 2023, respectively.

Operating Lease Cash Flows

The table below reconciles the undiscounted cash flows for each of the first five years and total of the remaining years to the operating lease liabilities recorded on the condensed consolidated balance sheet as of March 31, 2024:

	(in thousands)
Remainder of 2024	$	2,256
2025	2,714
2026	2,183
2027	490
2028	134
2029 and beyond	45
Total minimum lease payments	7,822
Less: amount of lease payments representing interest	(505)
Present value of future minimum lease payments	7,317
Less: current obligations under leases	(2,531)
Long-term lease liabilities	$	4,786

XML

Stockholders' Equity

3 Months Ended

Mar. 31, 2024

Equity [Abstract]

Stockholders' Equity

Stockholders’ Equity

At-The-Market offering

On February 27, 2024, the Company entered into a Sales Agreement ("Sales Agreement"), with Stifel, Nicolaus & Company, Incorporated ("Stifel"), under which the Company may offer and sell from time to time at its sole discretion, up to an aggregate of 1,200,000 shares of its common stock, par value $0.0001 per share, through Stifel acting as its sales agent. The Company used the net proceeds from the shares of common stock offered and sold to replenish funds expended to satisfy anticipated tax withholding and remittance obligations related to the net settlement upon vesting of restricted stock unit awards (“RSU”) granted to employees under the equity incentive plans. The Company has filed a prospectus supplement pursuant to the Sales Agreement for the offer and sale of up to an aggregate of 1,200,000 shares of its common stock. Subject to the terms and conditions of the Sales Agreement, Stifel will sell the common stock from time to time, based upon instructions from the Company. The Company agreed to pay Stifel a commission of up to 3% of the gross sales proceeds of any common stock sold through Stifel under the Sales Agreement.

During the three months ended March 31, 2024, the Company sold 32,500 shares of its common stock through Stifel under the Sales Agreement at a weighted average price of $92.57 per share resulting in net proceeds to the Company of $2.7 million, after deducting underwriting discounts and commissions of $0.1 million and offering costs of $0.2 million.

Equity Incentive Plans

The following table summarizes the RSU, performance based restricted stock units ("PRSU"), and multi-year performance restricted stock units ("MYPSU") activity for the three months ended March 31, 2024:

	RSU Number of Shares	Grant Date Fair Value per share		PRSU Number of Shares	Grant Date Fair Value per share		MYPSU Number of Shares	Grant Date Fair Value per share
Unvested at December 31, 2023	1,238,417	$	103.8	108,622	$	145.5	285,880	$	88.6
Granted	391,669	110.8		146,116	77.4		—	—
Vested	(229,644)	86.0		—	—		—	—
Forfeited	(13,170)	126.0		(55,532)	123.6		—	—
Unvested at March 31, 2024	1,387,272	$	108.5	199,206	$	101.5	285,880	$	88.6

In March 2024, the Compensation Committee approved target bonus amounts based on the achievement of revenue and individual performance goals for the fiscal year 2024 (the "2024 Goals"). The awards for the actual payouts are granted in the quarter following the end of the performance period. The target bonuses were granted based on a fixed dollar amount to be settled in RSUs on the vesting date and hence the awards have been classified as liability-based awards until settled. Such expense is included in the non-cash adjustment within stock-based compensation expense on the condensed consolidated cash flow statements. The liability of $0.1 million for 2024 Goals was recorded as accrued expenses and other current liabilities in the condensed consolidated balance sheet as of March 31, 2024.

In March 2024, the Compensation Committee of the Company approved PRSUs for the fiscal year 2024 with performance goals based on the achievement of relative total stockholder return with a three year performance period (the "2024 TSR PRSU Goals"). The grant-date fair value of each PRSU was determined using Monte Carlo simulation model. The assumptions used in the Monte Carlo simulation included expected volatility of 74.7%, risk free rate of 4.5%, no expected dividend yield and expected term of 2.8 years. The Company recognizes the expense related to the 2024 TSR PRSU Goals on a graded-vesting method over the requisite performance period. These grants are included in the PRSU awards granted in the table above.

The Company also operates a bonus plan for certain employees which are based on a fixed dollar amount to be settled in RSUs. These awards are categorized as liability-based awards until settled. Once settled, these awards are reflected as RSU granted in the above table. Such expense is included in the non-cash adjustment within stock-based compensation expense on the condensed consolidated cash flow statements. The liability of $0.9 million was recorded as accrued expenses and other current liabilities in the condensed consolidated balance sheet as of March 31, 2024.

Stock-Based Compensation

The following table presents the detail of stock-based compensation expense amounts included in the condensed consolidated statement of operations for each of the periods presented:

	Three Months Ended March 31,
	2024		2023
	(in thousands)
Equity based awards
Cost of revenue	$	175	$	628
Research and development	8,614		7,505
Selling, general and administrative	11,878		9,480
	$	20,667	$	17,613
Liability based awards - to be settled in equity
Cost of revenue	$	4	$	11
Research and development	563		526
Selling, general and administrative	469		386
	$	1,036	$	923
Total stock-based compensation - equity and liability based	$	21,703	$	18,536
Stock-based compensation expense recorded to additional paid-in capital
Equity based awards	$	20,667	$	17,613
Liability based awards - settled in equity	1,759		1,523
Stock compensation expense capitalized to inventory	$	468	$	—
Total stock-based compensation expense recorded to additional paid-in capital	$	22,894	$	19,136

The following table presents the unrecognized compensation costs and related weighted average period of recognition as of March 31, 2024:

	As of
	March 31, 2024
	Unrecognized Compensation Costs (in millions)		Weighted Average Period of Recognition (in years)
RSUs	$	137.1	2.0
PRSUs	$	16.0	1.5
MYPSUs	$	6.9	1.2
Liability-based awards	$	4.2	0.6

XML

Income Taxes

3 Months Ended

Mar. 31, 2024

Income Tax Disclosure [Abstract]

Income Taxes

Income Taxes

The quarterly provision for income taxes is based on applying the estimated annual effective tax rate to the year to date pre-tax income, plus any discrete items. The Company updates its estimate of its annual effective tax rate at the end of each quarterly period. The estimate takes into account annual forecasted income before income taxes, the geographic mix of income before income taxes and any significant permanent tax items.

The following table presents the provision for income taxes and the effective tax rates for the three months ended March 31, 2024 and 2023:

	Three Months Ended March 31,
	2024			2023
	(in thousands)
Income loss before income taxes	$	(28,691)		$	(16,420)
Income tax expense	(13)			(70)
Effective tax rate	0		%	0		%

The Company’s effective tax rate may vary from the U.S. federal statutory tax rate due to the change in the mix of earnings in tax jurisdictions with different statutory rates, benefits related to tax credits and the tax impact of non-deductible expenses, existence of full valuation allowance on its deferred tax assets, and other permanent differences between income before income taxes and taxable income.

A valuation allowance is established or maintained when, based on currently available information and other factors, it is more likely than not that all or a portion of the deferred tax assets will not be realized. The Company regularly assesses its valuation allowance against deferred tax assets on a jurisdiction by jurisdiction basis. The Company considers all available positive and negative evidence, including future reversals of temporary differences, projected future taxable income, tax planning strategies and recent financial results. Based on management’s assessment of the realizability of deferred tax assets, the Company continues to maintain a full valuation reserve on its deferred tax assets as of March 31, 2024.

The income tax provision was less than $0.1 million for both the three months ended March 31, 2024 and 2023. The effective tax rate was less than 1% for both the three months ended March 31, 2024 and 2023. The provision for income taxes is primarily related to the foreign subsidiaries’ local country obligations. The U.S. effective tax rate is less than 1% and is due to minimum state tax. There is no federal provision for income taxes as the Company has sufficient carryforward of net operating losses to offset any operating income earned since inception and has projected an operating loss in the current year.

As of March 31, 2024 and December 31, 2023, the Company had $2.3 million and $2.3 million, respectively, of total unrecognized tax benefits. If the Company is able to eventually recognize these uncertain tax positions, none of the unrecognized benefits would reduce the Company’s effective tax rate due to the full valuation allowance on the Company’s deferred tax assets.

The Company’s policy is to record interest and penalties related to unrecognized tax benefits as income tax expense. For the three months ended March 31, 2024 and 2023, the Company recorded immaterial amounts related to the accrual of interest and penalties.

XML

Segment, Geographic and Customer Information

3 Months Ended

Mar. 31, 2024

Segment Reporting [Abstract]

Segment, Geographic and Customer Information

Segment, Geographic and Customer Information

The Company operates in one reportable segment related to the sale of Precision Timing solutions to the global electronics industry.

Revenue by geographic area is presented based upon the ship-to location of the customers who purchased the Company’s products which may be different from the geographic locations of the ultimate end customers. The following table sets forth revenue by country for countries with 10% or more of the Company’s revenue during any of the periods presented:

	Three Months Ended March 31,
	2024		2023
	(in thousands)
Taiwan	$	9,559	$	10,614
Hong Kong	10,452		6,308
United States	3,494		7,490
Singapore	2,210		3,782
Other	7,307		10,149
Total	$	33,022	$	38,343

The following table sets forth the Company’s total property and equipment attributable to operations by country as of the periods presented:

	As of
	March 31, 2024		December 31, 2023
	(in thousands)
United States	$	20,492	$	22,540
Malaysia	15,163		14,471
Taiwan	6,884		6,520
Other	10,855		11,154
	$	53,394	$	54,685

XML

Commitments and Contingencies

3 Months Ended

Mar. 31, 2024

Commitments and Contingencies Disclosure [Abstract]

Commitments and Contingencies

Commitments and Contingencies

Legal Matters

From time to time, the Company may be a party to various litigation claims in the normal course of business. Legal fees and other costs associated with such actions are expensed as incurred. The Company assesses, in conjunction with legal counsel, the need to record a liability for litigation and contingencies. Accrual estimates are recorded when and if it is determined that such a liability for litigation and contingencies are both probable and reasonably estimable.

Indemnification

The Company is a party to a variety of agreements pursuant to which it may be obligated to indemnify other parties to such agreements with respect to certain matters. Typically, these obligations arise in the context of contracts that the Company has entered into, under which the Company customarily agrees to hold the other party harmless against losses arising from a breach of representations and covenants or terms and conditions related to such matters as the sale and/or delivery of its products, title to assets sold, certain intellectual property claims, defective products, and specified environmental matters. Further, the Company’s obligations under these agreements may be limited in terms of time, amount, or the scope of its responsibility and in some instances, the Company may have recourse against third-parties for certain payments made under these agreements. It is not possible to predict the maximum potential amount of future payments under these agreements due to the conditional nature of the Company’s obligations and the unique facts and circumstances involved in each particular agreement. Historically, the Company has had no material indemnification claims under these agreements.

XML

Related Party Transactions

3 Months Ended

Mar. 31, 2024

Related Party Transactions [Abstract]

Related Party Transactions

Related Party Transactions

MegaChips Corporation is the largest stockholder of the Company and held approximately 18.6% and 20.7% of the Company’s outstanding common stock as of March 31, 2024 and December 31, 2023, respectively.

There were no transactions with related parties during the three months ended March 31, 2024 and 2023.

XML

Net Loss Per Share

3 Months Ended

Mar. 31, 2024

Earnings Per Share [Abstract]

Net Loss Per Share

Net Loss Per Share

The following table summarizes the computation of basic and diluted net loss per share attributable to common stockholders of the Company:

	Three Months Ended March 31,
	2024		2023
	(in thousands, except per share data)
Net loss attributable to common stockholders	$	(28,704)	$	(16,490)
Weighted-average shares outstanding
Weighted average shares used to compute basic net loss per share	22,765		21,794
Dilutive effect of employee equity incentive plans	—		—
Weighted average shares used to compute diluted net loss per share	22,765		21,794
Net loss attributable to common stockholders per share, basic	$	(1.26)	$	(0.76)
Net loss attributable to common stockholders per share, diluted	$	(1.26)	$	(0.76)

Potential dilutive securities include dilutive common shares from share-based awards attributable to the assumed exercise of restricted stock unit awards using the treasury stock method. Under the treasury stock method, potential common shares outstanding are not included in the computation of diluted net income per share if their effect is anti-dilutive.

Anti-dilutive potential shares from share-based awards are excluded from the calculation of diluted earnings per share if either their exercise price exceeded the average market price during the period, or the share-based awards were determined to be anti-dilutive based on applying the treasury stock method. During the three months ended March 31, 2024 and 2023, the Company had 932,535 and 415,017 potential shares from share-based awards that are anti-dilutive, respectively.

XML

Pay vs Performance Disclosure - USD ($) $ in Thousands	3 Months Ended
	Mar. 31, 2024	Mar. 31, 2023
Pay vs Performance Disclosure
Net income (loss)	$ (28,704)	$ (16,490)

XML

Insider Trading Arrangements

3 Months Ended

Mar. 31, 2024

shares

Trading Arrangements, by Individual

Non-Rule 10b5-1 Arrangement Adopted

false

Rule 10b5-1 Arrangement Terminated

false

Non-Rule 10b5-1 Arrangement Terminated

false

Samsheer Ahmad [Member]

Trading Arrangements, by Individual

Material Terms of Trading Arrangement

On March 15, 2024, Samsheer Ahmad, Senior Vice President, Finance and Chief Accounting Officer, adopted a trading arrangement intended to satisfy the affirmative defense conditions of Rule 10b5-1(c) of the Exchange Act. Mr. Ahmad's

trading arrangement provides for the sale through December 31, 2024 of upto 12,000 shares of common stock of the Company. Mr. Ahmad's trading arrangement terminates on the earlier of: (i) December 31, 2024, (ii) the first date on which all trades set forth in the trading arrangement have been executed, or (iii) such date the trading arrangement is otherwise terminated according to its terms.

Name

Samsheer Ahmad

Title

Senior Vice President, Finance and Chief Accounting Officer

Rule 10b5-1 Arrangement Adopted

true

Adoption Date

March 15, 2024

Arrangement Duration

355 days

Aggregate Available

12,000

XML

The Company and Basis of Presentation (Policies)

3 Months Ended

Mar. 31, 2024

Accounting Policies [Abstract]

Principles of Consolidation

Principles of Consolidation

The condensed consolidated financial statements include the accounts of the Company and its wholly-owned subsidiaries. All intercompany transactions and balances have been eliminated in consolidation.

Recently Accounting Pronouncements

Recent Accounting Pronouncements

There are currently no new accounting pronouncements with a future effective date that are considered material, or could be material, to us.

XML

Acquisitions (Tables)

3 Months Ended

Mar. 31, 2024

Business Combination and Asset Acquisition [Abstract]

Schedule of Business Acquisitions, by Acquisition

The acquisition date fair value of the purchase consideration was $259.2 million, which comprised the following:

	Estimated Fair Value
	(in thousands)
Fixed consideration	$	139,946
Fair value of sales based earnout liability	102,278
Settlement of pre-existing arrangement	16,974
Total purchase consideration	$	259,198

Schedule of Recognized Identified Assets Acquired and Liabilities Assumed

The preliminary purchase consideration allocation to the assets acquired based on their respective estimated fair values as of the date of acquisition is as follows:

	Estimated Fair Value (Preliminary)		Estimated Useful Life	Financial Statement Line Item
	(in thousands)		(in years)
Developed Technology	$	96,700	5 to 8 years	Intangible assets, net
In-process research and development	69,500		Indefinite	Intangible assets, net
Assumed customer agreements	5,900		4 years	Intangible assets, net
Goodwill	87,098		Indefinite	Goodwill
Total assets acquired	$	259,198

Business Acquisition, Pro Forma Information

Following are the supplemental consolidated financial results of the Company on an unaudited pro forma basis, as if the acquisition had been consummated on January 1, 2023:

	Three Months Ended March 31,
Unaudited pro forma information	2024		2023
	(in thousands)
Revenue	$	33,022	$	38,743
Net loss	$	(28,705)	$	(27,085)

XML

Fair Value Measurements (Tables)

3 Months Ended

Mar. 31, 2024

Fair Value Disclosures [Abstract]

Fair Value, Liabilities Measured on Recurring Basis

The following table sets forth a summary of the changes in the fair value of the Company’s Level 3 financial liabilities:

	Amount
Fair value as of January 1, 2024	$	103,461
Change in the fair value during the year	1,041
Fair value as of March 31, 2024	$	104,502

XML

Balance Sheets Components (Tables)

3 Months Ended

Mar. 31, 2024

Balance Sheet Related Disclosures [Abstract]

Schedule of Accounts Receivable, Net

Accounts receivable, net consisted of the following:

	As of
	March 31, 2024		December 31, 2023		December 31, 2022
	(in thousands)
Accounts receivable, gross	$	16,824	$	21,911	$	41,279
Allowance for credit losses	(50)		(50)		(50)
Accounts receivable, net	$	16,774	$	21,861	$	41,229

Schedule of Inventory

Inventories consisted of the following:

	As of
	March 31, 2024		December 31, 2023
	(in thousands)
Raw materials	$	24,066	$	17,550
Work in progress	35,248		35,193
Finished goods	15,062		12,796
Total inventories	$	74,376	$	65,539

Schedule of Prepaid Expenses and Other Current Assets

Prepaid expenses and other current assets consisted of the following:

	As of
	March 31, 2024		December 31, 2023
	(in thousands)
Prepaid expenses	$	3,309	$	3,563
Other current assets	6,435		4,078
Total prepaid expenses and other current assets	$	9,744	$	7,641

Schedule of Property and Equipment Net

Property and equipment, net consisted of the following:

	As of
	March 31, 2024		December 31, 2023
	(in thousands)
Lab and manufacturing equipment	$	85,422	$	80,772
Computer equipment	3,577		3,541
Furniture and fixtures	1,002		969
Construction in progress	3,429		5,978
Leasehold improvements	7,833		7,847
	101,263		99,107
Accumulated depreciation	(47,869)		(44,422)
Total property and equipment, net	$	53,394	$	54,685

Schedule of Intangible Assets, Net

Intangible assets, net consisted of the following:

	As of
	March 31, 2024						December 31, 2023
	(in thousands)
	Gross Assets		Accumulated Amortization		Net Assets		Gross Assets		Accumulated Amortization		Net Assets
Developed technology	$	96,700	$	(1,073)	$	95,627	$	96,700	$	(159)	$	96,541
Contract based royalty asset	$	5,900	$	(492)	$	5,408	$	5,900	$	(121)	$	5,779
Internal use software	$	9,434	$	(9,334)	$	100	$	9,434	$	(9,234)	$	200
Purchased software	15,227		(10,626)		4,601		15,110		(10,051)		5,059
Total amortizable intangible assets	$	127,261	$	(21,525)	$	105,736	$	127,144	$	(19,565)	$	107,579
In-process research and development	$	69,500	$	—	$	69,500	$	69,500	$	—	$	69,500
Total intangible assets	$	196,761	$	(21,525)	$	175,236	$	196,644	$	(19,565)	$	177,079

Schedule of Future Amortization Expense for Intangible Assets

The estimated aggregate future amortization expense for intangible assets subject to amortization as of March 31, 2024 is summarized as below:

	(in thousands)
2024 (remainder)	$	12,030
2025	15,328
2026	14,986
2027	14,624
2028	12,912
2029 and beyond	35,856
	$	105,736

Schedule of Accrued Expenses and Other Current Liabilities

Accrued expenses and other current liabilities consisted of the following:

	As of
	March 31, 2024		December 31, 2023
	(in thousands)
Accrued payroll and related benefits	$	5,782	$	6,358
Revenue reserves	2,585		2,954
Sales based earnout liability, current	16,772		19,733
Acquisition consideration payable, current	76,245		75,695
Deferred non-recurring engineering services	617		978
Short term lease liability	2,531		2,601
Accrued customer rebates	238		238
Other accrued expenses	3,837		4,147
Total accrued expenses and other current liabilities	$	108,607	$	112,704

Other Noncurrent Liabilities

Other non-current liabilities consisted of the following:

	As of
	March 31, 2024		December 31, 2023
	(in thousands)
Sales based earnout liability, non-current	$	87,730	$	83,728
Acquisition consideration payable, non-current	34,500		33,086
Long term lease liability	4,786		5,423
Total other non-current liabilities	$	127,016	$	122,237

XML

Leases (Tables)

3 Months Ended

Mar. 31, 2024

Leases [Abstract]

Summary of Lease Related Assets and Liabilities

The table below presents the lease-related assets and liabilities recorded on the condensed consolidated balance sheets as of March 31, 2024 and December 31, 2023:

	As of
	March 31, 2024			December 31, 2023
	(in thousands)
Right-of-use assets	$	7,582		$	8,262
Lease liabilities included in accrued expenses and other current liabilities	2,531			2,601
Lease liabilities included in other non-current liabilities	4,786			5,423
Total operating lease liabilities	$	7,317		$	8,024
Weighted-average remaining lease term (years)	2.9			3.1
Weighted-average discount rate	4.5		%	4.5		%

Summary of Lease Costs

The table below presents certain information related to the lease costs for operating leases for the three months ended March 31, 2024 and 2023:

	Three Months Ended March 31,
	2024		2023
	(in thousands)
Operating lease cost	$	748	$	759
Short-term lease cost	177		177
Variable lease cost	316		264
Total lease cost	$	1,241	$	1,200

Summary of Undiscounted Cash Flows

The table below reconciles the undiscounted cash flows for each of the first five years and total of the remaining years to the operating lease liabilities recorded on the condensed consolidated balance sheet as of March 31, 2024:

	(in thousands)
Remainder of 2024	$	2,256
2025	2,714
2026	2,183
2027	490
2028	134
2029 and beyond	45
Total minimum lease payments	7,822
Less: amount of lease payments representing interest	(505)
Present value of future minimum lease payments	7,317
Less: current obligations under leases	(2,531)
Long-term lease liabilities	$	4,786

XML

Stockholders' Equity (Tables)

3 Months Ended

Mar. 31, 2024

Equity [Abstract]

Schedule of Restricted Stock Unit Award ("RSU") and Performance Based Restricted Stock Unit Awards ("PRSU") and Multi-year Performance Restricted Stock Units ("MYPSU") Activity (Details)

The following table summarizes the RSU, performance based restricted stock units ("PRSU"), and multi-year performance restricted stock units ("MYPSU") activity for the three months ended March 31, 2024:

	RSU Number of Shares	Grant Date Fair Value per share		PRSU Number of Shares	Grant Date Fair Value per share		MYPSU Number of Shares	Grant Date Fair Value per share
Unvested at December 31, 2023	1,238,417	$	103.8	108,622	$	145.5	285,880	$	88.6
Granted	391,669	110.8		146,116	77.4		—	—
Vested	(229,644)	86.0		—	—		—	—
Forfeited	(13,170)	126.0		(55,532)	123.6		—	—
Unvested at March 31, 2024	1,387,272	$	108.5	199,206	$	101.5	285,880	$	88.6

Schedule of Stock-based Compensation Expense Amounts Included in Condensed Consolidated Statement of Operations

The following table presents the detail of stock-based compensation expense amounts included in the condensed consolidated statement of operations for each of the periods presented:

	Three Months Ended March 31,
	2024		2023
	(in thousands)
Equity based awards
Cost of revenue	$	175	$	628
Research and development	8,614		7,505
Selling, general and administrative	11,878		9,480
	$	20,667	$	17,613
Liability based awards - to be settled in equity
Cost of revenue	$	4	$	11
Research and development	563		526
Selling, general and administrative	469		386
	$	1,036	$	923
Total stock-based compensation - equity and liability based	$	21,703	$	18,536
Stock-based compensation expense recorded to additional paid-in capital
Equity based awards	$	20,667	$	17,613
Liability based awards - settled in equity	1,759		1,523
Stock compensation expense capitalized to inventory	$	468	$	—
Total stock-based compensation expense recorded to additional paid-in capital	$	22,894	$	19,136

Summary of Unrecognized Compensation Costs and Related Weighted Average Period Of Recognition

The following table presents the unrecognized compensation costs and related weighted average period of recognition as of March 31, 2024:

	As of
	March 31, 2024
	Unrecognized Compensation Costs (in millions)		Weighted Average Period of Recognition (in years)
RSUs	$	137.1	2.0
PRSUs	$	16.0	1.5
MYPSUs	$	6.9	1.2
Liability-based awards	$	4.2	0.6

XML

Income Taxes (Tables)

3 Months Ended

Mar. 31, 2024

Income Tax Disclosure [Abstract]

Schedule of Provision for Income Taxes and Effective Tax Rates

The following table presents the provision for income taxes and the effective tax rates for the three months ended March 31, 2024 and 2023:

	Three Months Ended March 31,
	2024			2023
	(in thousands)
Income loss before income taxes	$	(28,691)		$	(16,420)
Income tax expense	(13)			(70)
Effective tax rate	0		%	0		%

XML

Segment, Geographic and Customer Information (Tables)

3 Months Ended

Mar. 31, 2024

Segment Reporting [Abstract]

Schedule of Revenue by Country

The following table sets forth revenue by country for countries with 10% or more of the Company’s revenue during any of the periods presented:

	Three Months Ended March 31,
	2024		2023
	(in thousands)
Taiwan	$	9,559	$	10,614
Hong Kong	10,452		6,308
United States	3,494		7,490
Singapore	2,210		3,782
Other	7,307		10,149
Total	$	33,022	$	38,343

Schedule of Property and Equipment Attributable to Operations

The following table sets forth the Company’s total property and equipment attributable to operations by country as of the periods presented:

	As of
	March 31, 2024		December 31, 2023
	(in thousands)
United States	$	20,492	$	22,540
Malaysia	15,163		14,471
Taiwan	6,884		6,520
Other	10,855		11,154
	$	53,394	$	54,685

XML

Net Loss Per Share (Tables)

3 Months Ended

Mar. 31, 2024

Earnings Per Share [Abstract]

Summary of Computation of Basic and Diluted Net Income (Loss) per Share

The following table summarizes the computation of basic and diluted net loss per share attributable to common stockholders of the Company:

	Three Months Ended March 31,
	2024		2023
	(in thousands, except per share data)
Net loss attributable to common stockholders	$	(28,704)	$	(16,490)
Weighted-average shares outstanding
Weighted average shares used to compute basic net loss per share	22,765		21,794
Dilutive effect of employee equity incentive plans	—		—
Weighted average shares used to compute diluted net loss per share	22,765		21,794
Net loss attributable to common stockholders per share, basic	$	(1.26)	$	(0.76)
Net loss attributable to common stockholders per share, diluted	$	(1.26)	$	(0.76)

XML

Acquisitions - Narrative (Details) - USD ($) $ in Thousands		3 Months Ended
	Dec. 01, 2023	Mar. 31, 2024	Mar. 31, 2023
Business Acquisition [Line Items]
Acquisition related costs		$ 3,242	$ 0
Aura
Business Acquisition [Line Items]
Total purchase consideration	$ 259,198
Acquisition related costs	$ 6,500

XML

Acquisitions - Schedule of Acquisition Date Fair Value of the Purchase Consideration (Details) - Aura $ in Thousands	Dec. 01, 2023 USD ($)
Business Acquisition [Line Items]
Fixed consideration	$ 139,946
Fair value of sales based earnout liability	102,278
Settlement of pre-existing arrangement	16,974
Total purchase consideration	$ 259,198

XML

Acquisitions - Schedule of Assets Acquired (Details) - USD ($) $ in Thousands	Dec. 01, 2023	Mar. 31, 2024	Dec. 31, 2023
Business Acquisition [Line Items]
Goodwill		$ 87,098	$ 87,098
Aura
Business Acquisition [Line Items]
Goodwill	$ 87,098
Total assets acquired	259,198
Aura | In-process research and development
Business Acquisition [Line Items]
In-process research and development	69,500
Aura | Developed Technology
Business Acquisition [Line Items]
Business combination, recognized identifiable assets acquired and liabilities assumed, finite-lived intangibles	$ 96,700
Aura | Developed Technology | Minimum
Business Acquisition [Line Items]
Estimated Useful Life	5 years
Aura | Developed Technology | Maximum
Business Acquisition [Line Items]
Estimated Useful Life	8 years
Aura | Assumed customer agreements
Business Acquisition [Line Items]
Business combination, recognized identifiable assets acquired and liabilities assumed, finite-lived intangibles	$ 5,900
Estimated Useful Life	4 years

XML

Acquisitions - Schedule of Pro Forma Information (Details) - Aura - USD ($) $ in Thousands	3 Months Ended
	Mar. 31, 2024	Mar. 31, 2023
Business Acquisition [Line Items]
Revenue	$ 33,022	$ 38,743
Net loss	$ (28,705)	$ (27,085)

XML

Fair Value Measurements - Additional Information (Details) $ in Millions	3 Months Ended	12 Months Ended
	Mar. 31, 2024 USD ($) yr	Dec. 31, 2023 USD ($)
Fair Value Assets And Liabilities Measured On Recurring And Nonrecurring Basis [Line Items]
Short-term investments in held-to-maturity securities, at amortized cost	$ 420.6	$ 519.0
Short-term investments in held-to-maturity securities, gross unrealized loss	$ 0.4	$ 0.3
Minimum
Fair Value Assets And Liabilities Measured On Recurring And Nonrecurring Basis [Line Items]
Treasury bills, maturity period	3 months	3 months
Maximum
Fair Value Assets And Liabilities Measured On Recurring And Nonrecurring Basis [Line Items]
Treasury bills, maturity period	12 months	12 months
Measurement Input, Price Volatility
Fair Value Assets And Liabilities Measured On Recurring And Nonrecurring Basis [Line Items]
Earnout liability, measurement input	0.20
Measurement Input, Risk Free Interest Rate | Minimum
Fair Value Assets And Liabilities Measured On Recurring And Nonrecurring Basis [Line Items]
Earnout liability, measurement input	0.042
Measurement Input, Risk Free Interest Rate | Maximum
Fair Value Assets And Liabilities Measured On Recurring And Nonrecurring Basis [Line Items]
Earnout liability, measurement input	0.054
Measurement Input, Expected Term | Minimum
Fair Value Assets And Liabilities Measured On Recurring And Nonrecurring Basis [Line Items]
Earnout liability, measurement input | yr	0.13
Measurement Input, Expected Term | Maximum
Fair Value Assets And Liabilities Measured On Recurring And Nonrecurring Basis [Line Items]
Earnout liability, measurement input | yr	4.63
Level 1
Fair Value Assets And Liabilities Measured On Recurring And Nonrecurring Basis [Line Items]
Highly liquid money market funds	$ 93.7	$ 0.4
Short-term investments in held-to-maturity securities, at amortized cost, excluding accrued interest	421.0	518.7
Short-term investments in held-to-maturity securities, gross accrued interest	$ 5.3	$ 8.9

XML

Fair Value Measurements - Fair Value, Liabilities Measured on Recurring Basis (Details) $ in Thousands	3 Months Ended
	Mar. 31, 2024 USD ($)
Fair Value, Liabilities Measured on Recurring Basis, Unobservable Input Reconciliation, Calculation [Roll Forward]
Fair value, liability value, beginning balance	$ 103,461
Change in the fair value during the year	1,041
Fair value, liability value, ending balance	$ 104,502
Fair Value, Liability, Recurring Basis, Unobservable Input Reconciliation, Gain (Loss), Statement of Income or Comprehensive Income [Extensible Enumeration]	Acquisition related costs

XML

Balance Sheets Components - Schedule of Accounts Receivable, Net (Details) - USD ($) $ in Thousands	Mar. 31, 2024	Dec. 31, 2023	Dec. 31, 2022
Balance Sheet Related Disclosures [Abstract]
Accounts receivable, gross	$ 16,824	$ 21,911	$ 41,279
Allowance for credit losses	(50)	(50)	(50)
Accounts receivable, net	$ 16,774	$ 21,861	$ 41,229

XML

Balance Sheets Components - Schedule of Inventory (Details) - USD ($) $ in Thousands	Mar. 31, 2024	Dec. 31, 2023
Balance Sheet Related Disclosures [Abstract]
Raw materials	$ 24,066	$ 17,550
Work in progress	35,248	35,193
Finished goods	15,062	12,796
Total inventories	$ 74,376	$ 65,539

XML

Balance Sheets Components - Schedule of Prepaid Expenses and Other Current Assets (Details) - USD ($) $ in Thousands	Mar. 31, 2024	Dec. 31, 2023
Balance Sheet Related Disclosures [Abstract]
Prepaid expenses	$ 3,309	$ 3,563
Other current assets	6,435	4,078
Total prepaid expenses and other current assets	$ 9,744	$ 7,641

XML

Balance Sheets Components - Schedule of Property and Equipment Net (Details) - USD ($) $ in Thousands	Mar. 31, 2024	Dec. 31, 2023
Property Plant And Equipment [Line Items]
Property and equipment, gross	$ 101,263	$ 99,107
Accumulated depreciation	(47,869)	(44,422)
Total property and equipment, net	53,394	54,685
Lab and manufacturing equipment
Property Plant And Equipment [Line Items]
Property and equipment, gross	85,422	80,772
Computer equipment
Property Plant And Equipment [Line Items]
Property and equipment, gross	3,577	3,541
Furniture and fixtures
Property Plant And Equipment [Line Items]
Property and equipment, gross	1,002	969
Construction in progress
Property Plant And Equipment [Line Items]
Property and equipment, gross	3,429	5,978
Leasehold improvements
Property Plant And Equipment [Line Items]
Property and equipment, gross	$ 7,833	$ 7,847

XML

Balance Sheets Components - Additional Information (Details) - USD ($) $ in Thousands	3 Months Ended
	Mar. 31, 2024	Mar. 31, 2023
Finite Lived Intangible Assets [Line Items]
Depreciation expense	$ 3,600	$ 3,200
Amortization expense for intangible assets	2,000	600
Reduction in research and development expenses	25,544	24,457
Non-recurring Engineering Service Arrangements
Finite Lived Intangible Assets [Line Items]
Reduction in research and development expenses	$ 400	$ 1,200

XML

Balance Sheets Components - Schedule of Intangible Assets Net (Details) - USD ($) $ in Thousands	Mar. 31, 2024	Dec. 31, 2023
Finite Lived Intangible Assets [Line Items]
Gross Assets	$ 127,261	$ 127,144
Accumulated Amortization	(21,525)	(19,565)
Net Assets	105,736	107,579
Intangible Assets, Net (Excluding Goodwill) [Abstract]
Gross Assets	196,761	196,644
Accumulated Amortization	(21,525)	(19,565)
Net Assets	175,236	177,079
In-process research and development
Indefinite-Lived Intangible Assets [Line Items]
In-process research and development	69,500	69,500
Developed Technology
Finite Lived Intangible Assets [Line Items]
Gross Assets	96,700	96,700
Accumulated Amortization	(1,073)	(159)
Net Assets	95,627	96,541
Intangible Assets, Net (Excluding Goodwill) [Abstract]
Accumulated Amortization	(1,073)	(159)
Contract based royalty asset
Finite Lived Intangible Assets [Line Items]
Gross Assets	5,900	5,900
Accumulated Amortization	(492)	(121)
Net Assets	5,408	5,779
Intangible Assets, Net (Excluding Goodwill) [Abstract]
Accumulated Amortization	(492)	(121)
Internal use software
Finite Lived Intangible Assets [Line Items]
Gross Assets	9,434	9,434
Accumulated Amortization	(9,334)	(9,234)
Net Assets	100	200
Intangible Assets, Net (Excluding Goodwill) [Abstract]
Accumulated Amortization	(9,334)	(9,234)
Purchased software
Finite Lived Intangible Assets [Line Items]
Gross Assets	15,227	15,110
Accumulated Amortization	(10,626)	(10,051)
Net Assets	4,601	5,059
Intangible Assets, Net (Excluding Goodwill) [Abstract]
Accumulated Amortization	$ (10,626)	$ (10,051)

XML

Balance Sheets Components - Schedule of Future Amortization Expense for Intangible Assets (Details) - USD ($) $ in Thousands	Mar. 31, 2024	Dec. 31, 2023
Balance Sheet Related Disclosures [Abstract]
2024 (remainder)	$ 12,030
2025	15,328
2026	14,986
2027	14,624
2028	12,912
2029 and beyond	35,856
Net Assets	$ 105,736	$ 107,579

XML

Balance Sheets Components - Schedule of Accrued Expenses and Other Current Liabilities (Details) - USD ($) $ in Thousands	Mar. 31, 2024	Dec. 31, 2023
Balance Sheet Related Disclosures [Abstract]
Operating Lease, Liability, Current, Statement of Financial Position [Extensible Enumeration]	Total accrued expenses and other current liabilities	Total accrued expenses and other current liabilities
Accrued payroll and related benefits	$ 5,782	$ 6,358
Revenue reserves	2,585	2,954
Sales based earnout liability, current	16,772	19,733
Acquisition consideration payable, current	76,245	75,695
Deferred non-recurring engineering services	617	978
Short term lease liability	2,531	2,601
Accrued customer rebates	238	238
Other accrued expenses	3,837	4,147
Total accrued expenses and other current liabilities	$ 108,607	$ 112,704

XML

Balance Sheets Components - Other Noncurrent Liabilities (Details) - USD ($) $ in Thousands	Mar. 31, 2024	Dec. 31, 2023
Balance Sheet Related Disclosures [Abstract]
Sales based earnout liability, non-current	$ 87,730	$ 83,728
Acquisition consideration payable, non-current	34,500	33,086
Long term lease liability	4,786	5,423
Total other non-current liabilities	$ 127,016	$ 122,237

XML

Leases - Additional Information (Details) - USD ($) $ in Millions	3 Months Ended
	Mar. 31, 2024	Mar. 31, 2023
Lessor, Lease, Description [Line Items]
Cash paid for operating lease liabilities	$ 0.8	$ 0.7
Minimum
Lessor, Lease, Description [Line Items]
Operating lease, renewal term	1 year
Maximum
Lessor, Lease, Description [Line Items]
Lease term	6 years
Operating lease, renewal term	5 years

XML

Leases - Summary of Lease Related Assets and Liabilities (Details) - USD ($) $ in Thousands	Mar. 31, 2024	Dec. 31, 2023
Leases [Abstract]
Right-of-use assets, net	$ 7,582	$ 8,262
Lease liabilities included in accrued expenses and other current liabilities	2,531	2,601
Long-term lease liabilities	4,786	5,423
Total operating lease liabilities	$ 7,317	$ 8,024
Weighted-average remaining lease term (years)	2 years 10 months 24 days	3 years 1 month 6 days
Weighted-average discount rate	4.50%	4.50%

XML

Leases - Summary of Lease Costs (Details) - USD ($) $ in Thousands	3 Months Ended
	Mar. 31, 2024	Mar. 31, 2023
Leases [Abstract]
Operating lease cost	$ 748	$ 759
Short-term lease cost	177	177
Variable lease cost	316	264
Total lease cost	$ 1,241	$ 1,200

XML

Leases - Summary of Undiscounted Cash Flows (Details) - USD ($) $ in Thousands	Mar. 31, 2024	Dec. 31, 2023
Leases [Abstract]
Remainder of 2024	$ 2,256
2025	2,714
2026	2,183
2027	490
2028	134
2029 and beyond	45
Total minimum lease payments	7,822
Less: amount of lease payments representing interest	(505)
Total operating lease liabilities	7,317	$ 8,024
Less: current obligations under leases	(2,531)	(2,601)
Long-term lease liabilities	$ 4,786	$ 5,423

XML

Stockholders' Equity - Additional Information (Details) - USD ($) $ / shares in Units, $ in Thousands		1 Months Ended	3 Months Ended
	Feb. 27, 2024	Mar. 31, 2024	Mar. 31, 2024	Mar. 31, 2023	Dec. 31, 2023
Share Based Compensation Arrangement By Share Based Payment Award [Line Items]
Common stock, shares authorized (in shares)		200,000,000	200,000,000		200,000,000
Common stock, par value (in dollars per share)		$ 0.0001	$ 0.0001		$ 0.0001
Payments of stock issuance costs			$ 303	$ 370
Accrued expenses and other current liabilities		$ 108,607	108,607		$ 112,704
Total Stockholder Performance Restricted Stock Unit Award (TSR PRSU)
Share Based Compensation Arrangement By Share Based Payment Award [Line Items]
Performance period		3 years
Expected volatility		74.70%
Risk free rate		4.50%
Expected dividend yield		0.00%
Expected term		2 years 9 months 18 days
Liability-based awards
Share Based Compensation Arrangement By Share Based Payment Award [Line Items]
Accrued expenses and other current liabilities		$ 900	900
2024 Goals
Share Based Compensation Arrangement By Share Based Payment Award [Line Items]
Accrued expenses and other current liabilities		$ 100	$ 100
At-The-Market Issuance Sales Agreement
Share Based Compensation Arrangement By Share Based Payment Award [Line Items]
Common stock, shares authorized (in shares)	1,200,000
Common stock, par value (in dollars per share)	$ 0.0001
Issuance of common stock in connection with At-The-Marker offering net of underwriting discounts and commissions and other offerings costs (in shares)	1,200,000		32,500
Percentage of sales commission from common stock sold	3.00%
Sale Of Common Stock Price Per Share			$ 92.57
Proceeds from public offering, net of underwriting discounts and commissions			$ 2,700
Payments for underwriting discounts and commissions			100
Payments of stock issuance costs			$ 200

XML

Stockholders' Equity - Schedule of Restricted Stock Unit Award ("RSU") and Performance Based Restricted Stock Unit Awards ("PRSU") and Multi-year Performance Restricted Stock Units ("MYPSU") Activity (Details)	3 Months Ended
	Mar. 31, 2024 $ / shares shares
Restricted Stock Units (RSU)
Share-Based Compensation Arrangement by Share-Based Payment Award, Equity Instruments Other than Options, Nonvested, Number of Shares [Roll Forward]
Number of Shares, beginning balance (in shares) | shares	1,238,417
Granted (in shares) | shares	391,669
Vested (in shares) | shares	(229,644)
Forfeited (in shares) | shares	(13,170)
Number of Shares, ending balance (in shares) | shares	1,387,272
Share-Based Compensation Arrangement by Share-Based Payment Award, Equity Instruments Other than Options, Nonvested, Weighted Average Grant Date Fair Value [Roll Forward]
Grant Date Fair Value per share, beginning balance (in dollars per share) | $ / shares	$ 103.8
Grant Date Fair Value per share, Granted (in dollars per share) | $ / shares	110.8
Grant Date Fair Value per share, Vested (in dollars per share) | $ / shares	86.0
Grant Date Fair Value per share, Forfeited (in dollars per share) | $ / shares	126.0
Grant Date Fair Value per share, ending balance (in dollars per share) | $ / shares	$ 108.5
Performance Restricted Stock Unit Award (PRSU)
Share-Based Compensation Arrangement by Share-Based Payment Award, Equity Instruments Other than Options, Nonvested, Number of Shares [Roll Forward]
Number of Shares, beginning balance (in shares) | shares	108,622
Granted (in shares) | shares	146,116
Vested (in shares) | shares	0
Forfeited (in shares) | shares	(55,532)
Number of Shares, ending balance (in shares) | shares	199,206
Share-Based Compensation Arrangement by Share-Based Payment Award, Equity Instruments Other than Options, Nonvested, Weighted Average Grant Date Fair Value [Roll Forward]
Grant Date Fair Value per share, beginning balance (in dollars per share) | $ / shares	$ 145.5
Grant Date Fair Value per share, Granted (in dollars per share) | $ / shares	77.4
Grant Date Fair Value per share, Vested (in dollars per share) | $ / shares	0
Grant Date Fair Value per share, Forfeited (in dollars per share) | $ / shares	123.6
Grant Date Fair Value per share, ending balance (in dollars per share) | $ / shares	$ 101.5
Multi-Year Performance Restricted Stock Unit Award (MYPSU)
Share-Based Compensation Arrangement by Share-Based Payment Award, Equity Instruments Other than Options, Nonvested, Number of Shares [Roll Forward]
Number of Shares, beginning balance (in shares) | shares	285,880
Granted (in shares) | shares	0
Vested (in shares) | shares	0
Forfeited (in shares) | shares	0
Number of Shares, ending balance (in shares) | shares	285,880
Share-Based Compensation Arrangement by Share-Based Payment Award, Equity Instruments Other than Options, Nonvested, Weighted Average Grant Date Fair Value [Roll Forward]
Grant Date Fair Value per share, beginning balance (in dollars per share) | $ / shares	$ 88.6
Grant Date Fair Value per share, Granted (in dollars per share) | $ / shares	0
Grant Date Fair Value per share, Vested (in dollars per share) | $ / shares	0
Grant Date Fair Value per share, Forfeited (in dollars per share) | $ / shares	0
Grant Date Fair Value per share, ending balance (in dollars per share) | $ / shares	$ 88.6

XML

Stockholders' Equity - Schedule of Stock-based Compensation Expense Amounts Included in Condensed Consolidated Statement of Operations (Details) - USD ($) $ in Thousands	3 Months Ended
	Mar. 31, 2024	Mar. 31, 2023
Share Based Compensation Arrangement By Share Based Payment Award [Line Items]
Stock compensation expense capitalized to inventory	$ 468	$ 0
Total stock-based compensation expense recorded to additional paid-in capital	22,894	19,136
Equity Based Awards
Share Based Compensation Arrangement By Share Based Payment Award [Line Items]
Stock-based compensation expense	20,667	17,613
Equity Based Awards | Additional Paid-in Capital
Share Based Compensation Arrangement By Share Based Payment Award [Line Items]
Stock-based compensation expense	20,667	17,613
Equity Based Awards | Cost of revenue
Share Based Compensation Arrangement By Share Based Payment Award [Line Items]
Stock-based compensation expense	175	628
Equity Based Awards | Research and development
Share Based Compensation Arrangement By Share Based Payment Award [Line Items]
Stock-based compensation expense	8,614	7,505
Equity Based Awards | Selling, general and administrative
Share Based Compensation Arrangement By Share Based Payment Award [Line Items]
Stock-based compensation expense	11,878	9,480
Liability Based Awards to be Settled in Equity
Share Based Compensation Arrangement By Share Based Payment Award [Line Items]
Stock-based compensation expense	1,036	923
Liability Based Awards to be Settled in Equity | Cost of revenue
Share Based Compensation Arrangement By Share Based Payment Award [Line Items]
Stock-based compensation expense	4	11
Liability Based Awards to be Settled in Equity | Research and development
Share Based Compensation Arrangement By Share Based Payment Award [Line Items]
Stock-based compensation expense	563	526
Liability Based Awards to be Settled in Equity | Selling, general and administrative
Share Based Compensation Arrangement By Share Based Payment Award [Line Items]
Stock-based compensation expense	469	386
Equity and Liability Based Awards
Share Based Compensation Arrangement By Share Based Payment Award [Line Items]
Stock-based compensation expense	21,703	18,536
Liability-based awards | Additional Paid-in Capital
Share Based Compensation Arrangement By Share Based Payment Award [Line Items]
Stock-based compensation expense	$ 1,759	$ 1,523

XML

Stockholders' Equity - Summary of Unrecognized Compensation Costs and Related Weighted Average Period of Recognition (Details) $ in Millions	3 Months Ended
	Mar. 31, 2024 USD ($)
RSUs
Share Based Compensation Arrangement By Share Based Payment Award [Line Items]
Unrecognized Compensation Costs (in millions)	$ 137.1
Weighted Average Period of Recognition (in years)	2 years
PRSUs
Share Based Compensation Arrangement By Share Based Payment Award [Line Items]
Unrecognized Compensation Costs (in millions)	$ 16.0
Weighted Average Period of Recognition (in years)	1 year 6 months
MYPSUs
Share Based Compensation Arrangement By Share Based Payment Award [Line Items]
Unrecognized Compensation Costs (in millions)	$ 6.9
Weighted Average Period of Recognition (in years)	1 year 2 months 12 days
Liability-based awards
Share Based Compensation Arrangement By Share Based Payment Award [Line Items]
Unrecognized Compensation Costs (in millions)	$ 4.2
Weighted Average Period of Recognition (in years)	7 months 6 days

XML

Income Taxes - Schedule of Provision for Income Taxes and Effective Tax Rates (Details) - USD ($) $ in Thousands	3 Months Ended
	Mar. 31, 2024	Mar. 31, 2023
Income Tax Disclosure [Abstract]
Income loss before income taxes	$ (28,691)	$ (16,420)
Income tax expense	$ (13)	$ (70)
Effective tax rate	0.00%	0.00%

XML

Income Taxes - Additional Information (Details) - USD ($) $ in Thousands	3 Months Ended
	Mar. 31, 2024	Mar. 31, 2023	Dec. 31, 2023
Income Tax [Line Items]
Income tax provision	$ 13	$ 70
Effective tax rate	0.00%	0.00%
Unrecognized tax benefits	$ 2,300		$ 2,300
Maximum
Income Tax [Line Items]
Income tax provision	$ 100	$ 100
Effective tax rate	1.00%	1.00%
U.S. effective tax rate	1.00%

XML

Segment, Geographic and Customer Information - Additional Information (Details)	3 Months Ended
	Mar. 31, 2024 segment
Segment Reporting [Abstract]
Number of reportable segments	1
Number of operating segments	1

XML

Segment, Geographic and Customer Information - Schedule of Revenue by Country (Details) - USD ($) $ in Thousands	3 Months Ended
	Mar. 31, 2024	Mar. 31, 2023
Segment Reporting Information [Line Items]
Revenue	$ 33,022	$ 38,343
Revenue from Contract with Customer Benchmark | Geographic Concentration Risk
Segment Reporting Information [Line Items]
Revenue	33,022	38,343
Taiwan | Revenue from Contract with Customer Benchmark | Geographic Concentration Risk
Segment Reporting Information [Line Items]
Revenue	9,559	10,614
Hong Kong | Revenue from Contract with Customer Benchmark | Geographic Concentration Risk
Segment Reporting Information [Line Items]
Revenue	10,452	6,308
United States | Revenue from Contract with Customer Benchmark | Geographic Concentration Risk
Segment Reporting Information [Line Items]
Revenue	3,494	7,490
Singapore | Revenue from Contract with Customer Benchmark | Geographic Concentration Risk
Segment Reporting Information [Line Items]
Revenue	2,210	3,782
Other | Revenue from Contract with Customer Benchmark | Geographic Concentration Risk
Segment Reporting Information [Line Items]
Revenue	$ 7,307	$ 10,149

XML

Segment, Geographic and Customer Information - Schedule of Property and Equipment Attributable to Operations (Details) - USD ($) $ in Thousands	Mar. 31, 2024	Dec. 31, 2023
Segment Reporting Information [Line Items]
Property and equipment, net	$ 53,394	$ 54,685
United States
Segment Reporting Information [Line Items]
Property and equipment, net	20,492	22,540
Malaysia
Segment Reporting Information [Line Items]
Property and equipment, net	15,163	14,471
Taiwan
Segment Reporting Information [Line Items]
Property and equipment, net	6,884	6,520
Other
Segment Reporting Information [Line Items]
Property and equipment, net	$ 10,855	$ 11,154

XML

Related Party Transactions - Additional Information (Details)	Mar. 31, 2024	Dec. 31, 2023
Related Party | MegaChips | Si Time Corporation
Related Party Transaction [Line Items]
Percentage of outstanding common stock held	18.60%	20.70%

XML

Net Loss Per Share - Summary of Computation of Basic and Diluted Net Income (Loss) per Share (Details) - USD ($) $ / shares in Units, shares in Thousands, $ in Thousands	3 Months Ended
	Mar. 31, 2024	Mar. 31, 2023
Earnings Per Share [Abstract]
Net loss attributable to common stockholders	$ (28,704)	$ (16,490)
Weighted average shares used to compute basic net loss per share (in shares)	22,765	21,794
Dilutive effect of employee equity incentive plans (in shares)	0	0
Weighted average shares used to compute diluted net loss per share (in shares)	22,765	21,794
Net loss attributable to common stockholders per share, basic (in dollars per share)	$ (1.26)	$ (0.76)
Net loss attributable to common stockholders per share, diluted (in dollars per share)	$ (1.26)	$ (0.76)

XML

Net Loss Per Share - Additional Information (Details) - shares	3 Months Ended
	Mar. 31, 2024	Mar. 31, 2023
Earnings Per Share [Abstract]
Anti-dilutive weighted shares (in shares)	932,535	415,017