10-Q

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-Q

☒	QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the quarterly period ended September 30, 2014
OR
☐	TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from          to

Commission File No.  001-31332

LIQUIDMETAL TECHNOLOGIES, INC.

 (Exact name of Registrant as specified in its charter)

Delaware	33-0264467
(State or other jurisdiction of	(I.R.S. Employer
incorporation or organization)	Identification No.)

30452 Esperanza

Rancho Santa Margarita, CA 92688

(Address of principal executive offices, zip code)

Registrant’s telephone number, including area code: (949) 635-2100

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.         

Yes  ☒    No  ☐

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such

files). 

Yes   ☒   No  ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer ☐ Accelerated filer ☐ Non-accelerated filer ☐ Smaller reporting company ☒

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). 

Yes   ☐    No  ☒

The number of common shares outstanding as of November 7, 2014 was 464,482,819.

LIQUIDMETAL TECHNOLOGIES, INC.
FORM 10-Q
FOR THE QUARTER ENDED September 30, 2014

FORWARD-LOOKING INFORMATION

This Quarterly Report on Form 10-Q of Liquidmetal Technologies, Inc. contains “forward-looking statements” that may state our management’s plans, future events, objectives, current expectations, estimates, forecasts, assumptions or projections about the company and its business. Any statement in this report that is not a statement of historical fact is a forward-looking statement, and in some cases, words such as “believes,” “estimates,” “projects,” “expects,” “intends,” “may,” “anticipates,” “plans,” “seeks,” and similar expressions identify forward-looking statements. Forward-looking statements involve risks and uncertainties that could cause actual outcomes and results to differ materially from the anticipated outcomes or results. These statements are not guarantees of future performance, and undue reliance should not be placed on these statements. It is important to note that our actual results could differ materially from what is expressed in our forward-looking statements due to the risk factors described in the section of our Annual Report on Form 10-K for the year ended December 31, 2013 entitled “Risk Factors,” as well as the following risks and uncertainties:

● Our ability to fund our operations in the long-term through financing transactions on terms acceptable to us, or at all;

● Our history of operating losses and the uncertainty surrounding our ability to achieve or sustain profitability;

● Our limited history of developing and selling products made from our bulk amorphous alloys;

● Our limited history in licensing our technology to third parties;

● Lengthy customer adoption cycles and unpredictable customer adoption practices;

● Our ability to identify, develop, and commercialize new product applications for our technology;

● Competition from current suppliers of incumbent materials or producers of competing products;

● Our ability to identify, consummate, and/or integrate strategic partnerships;

● The potential for manufacturing problems or delays; and

● Potential difficulties associated with protecting or expanding our intellectual property position.

We undertake no obligation to update publicly any forward-looking statements, whether as a result of new information, future events or otherwise.

2

TABLE OF CONTENTS
PART I - Financial Information
Item 1 – Financial Statements	4
Consolidated Balance Sheets
Consolidated Statements of Operations and Comprehensive Loss
Consolidated Statement of Shareholders’ Equity (Deficit)
Consolidated Statements of Cash Flows
Notes to Consolidated Financial Statements
Item 2 – Management’s Discussion and Analysis of Financial Condition and Results of Operations	19
Item 3 – Quantitative and Qualitative Disclosures about Market Risk	24
Item 4 – Controls and Procedures	24
PART II – Other Information
Item 1 – Legal Proceedings	25
Item 1A – Risk Factors	25
Item 2 – Unregistered Sales of Equity Securities and Use of Proceeds	25
Item 3 – Defaults Upon Senior Securities	25
Item 4 – Mine Safety Disclosures	25
Item 5 – Other Information	25
Item 6 – Exhibits	26
Signatures	27

3

PART I

FINANCIAL INFORMATION

Item 1 – Financial Statements

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS

(in thousands, except par value and share data)

	September 30,			December 31,
	2014			2013
	(Unaudited)			(Audited)
ASSETS
Current assets:
Cash	$	11,902		$	2,062
Trade accounts receivable, net of allowance for doubtful accounts		63			215
Prepaid expenses and other current assets		421			412
Total current assets	$	12,386		$	2,689
Property and equipment, net		1,101			249
Patents and trademarks, net		695			764
Other assets		28			401
Total assets	$	14,210		$	4,103
LIABILITIES AND STOCKHOLDERS' DEFICIT
Current liabilities:
Accounts payable		275			361
Accrued liabilities		689			710
Deferred revenue		60			-
Convertible notes, net of debt discount		-			-
Embedded conversion feature liabilities on convertible notes		-			-
Total current liabilities	$	1,024		$	1,071
Long-term liabilities:
Warrant liabilities		4,981			4,921
Other long-term liabilities		856			856
Total liabilities	$	6,861		$	6,848
Stockholders' equity (deficit):
Preferred Stock, $0.001 par value; 10,000,000 shares authorized; 0 shares issued and outstanding at September 30, 2014 and December 31, 2013.		-			-
Common stock, $0.001 par value; 700,000,000 shares authorized at September 30, 2014 and December 31, 2013; 464,482,819 and 375,707,190 shares issued and outstanding at September 30, 2014 and December 31, 2013, respectively		464			376
Warrants		18,179			18,179
Additional paid-in capital		200,277			182,832
Accumulated deficit		(211,519	)		(204,090	)
Non-controlling interest in subsidiary		(52	)		(42	)
Total stockholders' equity (deficit)		7,349			(2,745	)
Total liabilities and stockholders' equity (deficit)	$	14,210		$	4,103

The accompanying notes are an integral part of the consolidated financial statements.

4

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF OPERATIONS AND COMPREHENSIVE LOSS

(in thousands, except share and per share data)

(unaudited)

	For the Three Months Ended September 30,						For the Nine Months Ended September 30,
	2014			2013			2014			2013
Revenue
Products	$	97		$	456		$	374		$	721
Licensing and royalties		-			-			36			7
Total revenue		97			456			410			728
Cost of sales		85			396			300			589
Gross profit		12			60			110			139
Operating expenses
Selling, marketing, general and administrative		1,847			1,213			5,719			3,735
Research and development		498			368			1,224			829
Total operating expenses		2,345			1,581			6,943			4,564
Operating loss		(2,333	)		(1,521	)		(6,833	)		(4,425	)
Change in value of warrants, gain (loss)		1,595			(2,511	)		(276	)		(1,715	)
Change in value of embedded conversion feature liabilities, gain (loss)		-			(2,435	)		-			621
Debt discount amortization expense		(321	)		(361	)		(373	)		(6,504	)
Interest expense		-			(21	)		-			(242	)
Interest and other income		41			1			43			5
Gain on extinguishment of debt (Note 7)		-			91			-			91
Net loss		(1,018	)		(6,757	)		(7,439	)		(12,169	)
Net loss attributable to non-controlling interest		2			32			10			40
Net loss and comprehensive loss attributable to Liquidmetal Technologies shareholders	$	(1,016	)	$	(6,725	)	$	(7,429	)	$	(12,129	)
Net loss per common share attributable to Liquidmetal Technologies shareholders, basic and diluted	$	(0.00	)	$	(0.02	)	$	(0.02	)	$	(0.04	)
Number of weighted average shares - basic and diluted		464,269,486			372,840,523			433,757,751			330,329,312

The accompanying notes are an integral part of the consolidated financial statements.

5

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENT OF STOCKHOLDERS' EQUITY (DEFICIT)

(in thousands, except share data)

(unaudited)

	Preferred Shares		Common Shares		Common Stock		Warrants part of Additional Paid-in Capital		Additional Paid-in Capital		Accumulated Deficit			Non Controlling Interest			Total
Balance, December 31, 2013		-		375,707,190	$	376	$	18,179	$	182,832	$	(204,090	)	$	(42	)	$	(2,745	)
Common stock issuance				85,355,615		85				15,915								16,000
Stock option exercises				2,242,014		2				203								205
Warrant exercises				1,178,000		1				225								226
Stock-based compensation										652								652
Restricted stock issued to officer										234								234
Reclassification of warrant liability to equity upon exercise										216								216
Net loss												(7,429	)		(10	)		(7,439	)
Balance, September 30, 2014		-		464,482,819	$	464	$	18,179	$	200,277	$	(211,519	)	$	(52	)	$	7,349

The accompanying notes are an integral part of the consolidated financial statements.

6

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF CASH FLOW

(in thousands, except per share data)

(unaudited)

	Nine Months Ended September 30,
	2014			2013
Operating activities:
Net loss	$	(7,439	)	$	(12,169	)
Adjustments to reconcile net loss to net cash used in operating activities:
Depreciation and amortization		189			158
Gain on sale of fixed asset		(5	)		-
Bad debt expense		-			11
Stock-based compensation		652			134
Restricted stock compensation issued to officer		234			234
Loss from change in value of warrants		276			1,715
Gain from change in value of embedded conversion feature liabilities		-			(621	)
Gain on extinguishment of debt (Note 7)		-			(91	)
Debt discount amortization		373			6,504
Non-cash interest expense		-			242
Changes in operating assets and liabilities:
Trade accounts receivable		152			(378	)
Prepaid expenses and other current assets		(9	)		(127	)
Accounts payable and accrued liabilities		(113	)		360
Deferred revenue		60			-
Net cash used in operating activities		(5,630	)		(4,028	)
Investing Activities:
Purchases of property and equipment		(957	)		(172	)
Proceeds from sale of fixed assets		5			-
Investment in patents and trademarks		(9	)		(13	)
Net cash used in investing activities		(961	)		(185	)
Financing Activities:
Proceeds from exercise of stock options		205			74
Proceeds from exercise of warrants		226			-
Proceeds from stock issuance		16,000			-
Net cash provided by financing activities		16,431			74
Net increase (decrease) in cash		9,840			(4,139	)
Cash at beginning of period		2,062			7,162
Cash at end of period	$	11,902		$	3,023
Supplemental Schedule of Non-Cash Investing and Financing Activities:
Pre-installment payment of convertible debt and interest through common stock issuance		-			7,187
Dividends paid in common stock upon preferred stock conversion		-			222

 The accompanying notes are an integral part of the consolidated financial statements.

7

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

For the Nine Months Ended September 30, 2014 and 2013

(numbers in thousands, except share and  per share data)

(unaudited)

1. Description of Business

Liquidmetal Technologies, Inc. (the “Company”) is a materials technology company that develops and commercializes products made from amorphous alloys. The Company’s family of alloys consists of a variety of proprietary bulk alloys and composites that utilize the advantages offered by amorphous alloy technology. The Company designs, develops and sells products and components from bulk amorphous alloys to customers in various industries. The Company also partners with third-party manufacturers and licensees to develop and commercialize Liquidmetal alloy products.

Amorphous alloys are, in general, unique materials that are distinguished by their ability to retain a random atomic structure when they solidify, in contrast to the crystalline atomic structures that form in other metals and alloys when they solidify. Liquidmetal alloys are proprietary amorphous alloys that possess a combination of performance, processing, and potential cost advantages that the Company believes will make them preferable to other materials in a variety of applications. The amorphous atomic structure of the Company’s alloys enables them to overcome certain performance limitations caused by inherent weaknesses in crystalline atomic structures, thus facilitating performance and processing characteristics superior in many ways to those of their crystalline counterparts. For example, in laboratory testing, zirconium-titanium Liquidmetal alloys are approximately 250% stronger than commonly used titanium alloys such as Ti-6Al-4V, but they also have some of the beneficial processing characteristics more commonly associated with plastics. The Company believes these advantages could result in Liquidmetal alloys supplanting high-performance alloys, such as titanium and stainless steel, and other incumbent materials in a variety of applications. Moreover, the Company believes these advantages could enable the introduction of entirely new products and applications that are not possible or commercially viable with other materials.

The Company’s revenues are derived from i) selling bulk Liquidmetal alloy products, which include non-consumer electronic devices, aerospace parts, medical products, automotive components, oil and gas exploration, and sports and leisure goods, ii) selling tooling and prototype parts such as demonstration parts and test samples for customers with products in development, iii) product licensing and royalty revenue, and iv) research and development revenue.

2. Basis of Presentation and Recent Accounting Pronouncements

The accompanying unaudited interim consolidated financial statements as of and for the nine months ended September 30, 2014 have been prepared in accordance with accounting principles generally accepted in the United States of America (“generally accepted accounting principles”) for interim financial information and with the instructions to Form 10-Q. Accordingly, they do not include all of the information and notes required by generally accepted accounting principles for complete financial statements. In the opinion of management, all adjustments (consisting only of normal recurring accruals) considered necessary for a fair presentation have been included. All intercompany balances and transactions have been eliminated in consolidation. Operating results for the three and nine month periods ended September 30, 2014 are not necessarily indicative of the results that may be expected for any future periods or the year ending December 31, 2014. The accompanying unaudited consolidated financial statements should be read in conjunction with the Company's 2013 Annual Report on Form 10-K filed with the Securities and Exchange Commission on March 5, 2014.

Revenue Recognition

Revenue is recognized pursuant to applicable accounting standards including FASB ASC Topic 605 (“ASC 605”), Revenue Recognition. ASC 605 summarizes certain points of the SEC staff’s views in applying generally accepted accounting principles to revenue recognition in financial statements and provides guidance on revenue recognition issues in the absence of authoritative literature addressing a specific arrangement or a specific industry.

The Company’s revenue recognition policy complies with the requirements of ASC 605. Revenue is recognized when (i) persuasive evidence of an arrangement exists, (ii) delivery has occurred, (iii) the sales price is fixed or determinable, (iv) collection is probable and (v) all obligations have been substantially performed pursuant to the terms of the arrangement. Revenues are derived primarily from the sales and prototyping of Liquidmetal mold and bulk alloys as well as licensing and royalties for the use of the Liquidmetal brand and bulk Liquidmetal alloys. Revenue is deferred and included in liabilities when the Company receives cash in advance for goods not yet delivered or if the licensing term has not begun.

License revenue arrangements in general provide for the grant of certain intellectual property rights for patented technologies owned or controlled by the Company. These rights typically include the grant of an exclusive or non-exclusive right to manufacture and/or sell products covered by patented technologies owned or controlled by the Company. The intellectual property rights granted may be perpetual in nature, extending until the expiration of the related patents, or can be granted for a defined period of time.

Licensing revenues that are one time fees upon the granting of the license are recognized when (i) the license term begins in a manner consistent with the nature of the transaction and the earnings process, (ii) collectability is reasonably assured or upon receipt of an upfront fee, and (iii) all other revenue recognition criteria have been met. Pursuant to the terms of these types of licensing agreements, the Company has no further obligation with respect to the grant of the license once the license is granted. Licensing revenues that are related to royalties are recognized as the royalties are earned over the related period.

8

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

For the Nine Months Ended September 30, 2014 and 2013

(numbers in thousands, except share and  per share data)

(unaudited)

Fair Value Measurements

The estimated fair values of amounts reported in the consolidated financial statements have been determined using available market information and valuation methodologies, as applicable. The fair value of cash, trade receivables, prepaid expenses and other current assets, accounts payable, and accrued liabilities approximate their carrying value due to their short maturities. The fair value of non-current assets and liabilities approximate their carrying value unless otherwise stated.

Fair value is defined as the exchange price that would be received for an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date. Entities are required to maximize the use of observable inputs and minimize the use of unobservable inputs when measuring fair value based upon the following fair value hierarchy:

Level 1 — Quoted prices in active markets for identical assets or liabilities;

Level 2 — Observable inputs other than Level 1 prices, such as quoted prices for similar assets or liabilities; quoted prices in markets that are not active; or other inputs that are observable or can be corroborated by observable market data for substantially the full term of the assets or liabilities; and

Level 3 — Unobservable inputs that are supported by little or no market activity and that are significant to the fair value of the assets or liabilities.

The Company has one Level 2 financial instrument, that being liability classified warrants that are recorded at fair value on a periodic basis. Warrants are evaluated under the hierarchy of FASB ASC Subtopic 480-10, FASB ASC Paragraph 815-25-1 and FASB ASC Subparagraph 815-10-15-74 addressing embedded derivatives. The fair value of such warrants is estimated using the Black-Scholes option pricing model. The foregoing warrants have certain anti-dilution and exercise price reset provisions which qualify the warrants to be classified as a liability under FASB ASC 815 (see note 8).

The Company had one Level 3 financial instrument during the nine months ended September 30, 2013, that being an embedded conversion feature that was accounted for as a derivative and recorded at fair value on a periodic basis. The embedded derivative was evaluated under the hierarchy of FASB ASC Subtopic 480-10, FASB ASC Paragraph 815-25-1 and FASB ASC Subparagraph 815-10-15-74 addressing embedded derivatives. The fair value of such embedded derivative was estimated using the Monte Carlo simulation model. The foregoing embedded derivative had certain anti-dilution and exercise price reset provisions which qualified the embedded derivative to be classified as a liability under FASB ASC 815. Upon the final settlement of the senior convertible notes issued in the July 2012 Private Placement (as defined below), this liability was extinguished as the underlying conversion option had been executed. As such, the fair value of the liability was reduced to zero upon conversion during the third quarter of 2013 (see note 7).

As of September 30, 2014, the following table represents the Company’s fair value hierarchy for items that are required to be measured at fair value on a recurring basis:

	Fair Value		Level 1		Level 2		Level 3
Warrant liabilities		4,981		-		4,981		-

9

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

For the Nine Months Ended September 30, 2014 and 2013

(numbers in thousands, except share and  per share data)

(unaudited) 

Recent Accounting Pronouncements

Presentation of Items Reclassified out of Accumulated Other Comprehensive Income

In February 2013, the FASB issued an accounting standards update which requires disclosure related to items reclassified out of accumulated other comprehensive income (“AOCI”). The guidance requires entities to present separately, for each component of other comprehensive income (“OCI”), current period reclassifications and the remainder of the current-period OCI. In addition, for certain current period reclassifications, an entity is required to disclose the effect of the item reclassified out of AOCI on the respective line item of net income. The adoption of this pronouncement did not have a material impact on the Company’s Consolidated Financial Statements and accompanying disclosures.

Presentation of Unrecognized Tax Benefits

In July 2013, the FASB issued an accounting standards update which will require that an unrecognized tax benefit be presented on the balance sheet as a reduction of a deferred tax asset for a net operating loss or tax credit carryforward under certain circumstances. The adoption of this pronouncement did not have a material impact on the Company’s Consolidated Financial Statements and accompanying disclosures.

Revenue from Contracts with Customers

In May 2014, the FASB issued an accounting standards update which modifies the requirements for identifying, allocating, and recognizing revenue related to the achievement of performance conditions under contracts with customers. This update also requires additional disclosure related to the nature, amount, timing, and uncertainty of revenue that is recognized under contracts with customers. This guidance is effective beginning January 1, 2017 and is required to be applied retrospectively to all revenue arrangements. The Company is currently assessing the effects this guidance may have on its consolidated financial statements.

Ability to Continue as a Going Concern

In August 2014, the FASB issued an accounting standards update which requires an assessment of an entity’s ability to continue as a going concern by incorporating and expanding upon certain principles that are currently addressed by U.S. auditing standards.This standard is effective for the fiscal years ending after December 15, 2016, and for annual periods and interim periods thereafter. The Company is currently evaluating the new guidance to determine the impact it will have on its consolidated financial statements.

Other recent accounting pronouncements issued by the FASB (including its Emerging Issues Task Force), the AICPA and the SEC did not or are not believed by management to have a material impact on the Company's present or future consolidated financial statements.

3. Significant Transactions

2014 Stock Purchase Agreement

On August 20, 2014, the Company entered into a common stock purchase agreement (“2014 Purchase Agreement”) with Aspire Capital Fund LLC (“Aspire Capital”), which provides that, upon the terms and subject to the conditions and limitations set forth therein, Aspire Capital is committed to purchase up to an aggregate of $30,000 worth of the Company’s common stock, $0.001 par value, over the 36 month term of the 2014 Purchase Agreement.

From time to time over the term of the 2014 Purchase Agreement, the Company may, at its sole discretion, provide Aspire Capital with a regular purchase notice (each a “Regular Purchase Notice”) directing Aspire Capital to purchase up to 1,000,000 shares, but not to exceed $400, of the Company’s common stock per trading day at a price per share equal to the lesser of (i) the lowest sale price of the Company’s common stock on the purchase date; or (ii) the arithmetic average of the three lowest closing sale prices for the Company’s common stock during the twelve consecutive trading days ending on the trading day immediately preceding the purchase date.

In addition, on any date on which the Company submits a Regular Purchase Notice to Aspire Capital for the purchase of at least 500,000 shares at a price above $0.30, the Company also has the right, in its sole discretion, to present Aspire Capital with a volume-weighted average price purchase notice (each, a “VWAP Purchase Notice”) directing Aspire Capital to purchase an amount of stock equal to up to 30% of the aggregate shares of the Company’s common stock traded on its principal market on the next trading day (the “VWAP Purchase Date”), subject to a maximum number of shares the Company may determine. The purchase price per share pursuant to such VWAP Purchase Notice is generally 95% of the volume-weighted average price for the Company’s common stock traded on its principal market on the VWAP Purchase Date.

The Company may deliver multiple Regular Purchase Notices and VWAP Purchase Notices to Aspire Capital from time to time during the term of the 2014 Purchase Agreement, so long as the most recent purchase has been completed. The 2014 Purchase Agreement provides that the Company and Aspire Capital shall not effect any sales under the 2014 Purchase Agreement on any purchase date where the closing sale price of the Company’s common stock is less than $0.10 per share. There are no trading volume requirements or restrictions under the 2014 Purchase Agreement, and the Company will control the timing and amount of sales of the Company’s common stock to Aspire Capital.

10

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

For the Nine Months Ended September 30, 2014 and 2013

(numbers in thousands, except share and  per share data)

(unaudited)

On September 9, 2014, an initial registration statement covering 75,000,000 shares issued and issuable pursuant to the 2014 Purchase Agreement was declared effective by the SEC. To date, there have been no transactions under this agreement.

2013 Stock Purchase Agreement

On November 8, 2013, the Company entered into a Common Stock Purchase Agreement (the “2013 Purchase Agreement”) with Kingsbrook Opportunities Master Fund LP, Tech Opportunities LLC, and Iroquois Master Fund Ltd. (each, a “2013 Investor” and collectively, the “2013 Investors”). The 2013 Purchase Agreement provided that, upon the terms and subject to the conditions set forth therein, each of the 2013 Investors had committed to purchase such 2013 Investor’s pro rata portion of up to $20,000 (the “Total Commitment”) worth of the Company’s common stock, $0.001 par value (the “Shares”), over the 36-month term of the 2013 Purchase Agreement. In consideration for the execution and delivery of the 2013 Purchase Agreement, on November 8, 2013, the Company issued 2,666,667 shares of common stock (“the Commitment Shares”) to the 2013 Investors.

From time to time over the term of the 2013 Purchase Agreement, the Company was able to, at its sole discretion, provide each of the 2013 Investors with draw down notices (each a “Draw Down Notice”) to purchase a specified dollar amount of Shares (the “Draw Down Amount”) over a five (5) consecutive trading day period commencing on the trading day specified in the applicable Draw Down Notice (the “Pricing Period”) with each draw down subject to the limitations discussed below. The maximum amount of Shares requested to be purchased pursuant to any single Draw Down Notice could not exceed a dollar amount equal to the lesser of (i) 300% of the average trading volume of the Company’s common stock during the ten (10) trading days immediately preceding the date the applicable Draw Down Notice was delivered (the “Applicable Draw Down Exercise Date”) multiplied by the lower of (A) the closing trade price of the Company’s common stock on the trading day immediately preceding the Applicable Draw Down Exercise Date and (B) the average of the closing trade prices of our common stock for the three (3) trading days immediately preceding the Applicable Draw Down Exercise Date (such lower price, the “Reference Price”), and (ii) a specified dollar amount set forth in the 2013 Purchase Agreement based on the Reference Price as of the Applicable Draw Down Exercise Date.

Once presented with a Draw Down Notice, each of the 2013 Investors was required to purchase such 2013 Investor’s pro rata portion of the applicable Draw Down Amount on each trading day during the applicable Pricing Period on which the daily volume weighted average price for the Company’s common stock (the “VWAP”) equaled or exceeded an applicable floor price equal to the product of (i) 0.775 and (ii) the Reference Price, subject to adjustment (the “Floor Price”), provided that in no event could the Floor Price be less than $0.03875. If the VWAP fell below the applicable Floor Price on any trading day during the applicable Pricing Period, the 2013 Purchase Agreement provided that the 2013 Investors would not be required to purchase their pro rata portions of the applicable Draw Down Amount allocated to that trading day. The per share purchase price for the Shares subject to a Draw Down Notice was equal to 90% of the lowest daily VWAP that equaled or exceeded the applicable Floor Price during the applicable Pricing Period. Each purchase pursuant to a draw down reduced, on a dollar-for-dollar basis, the Total Commitment under the 2013 Purchase Agreement.

The Company was prohibited from issuing a Draw Down Notice if (i) the amount requested in such Draw Down Notice exceeded the Maximum Draw Down Amount, (ii) the sale of Shares pursuant to such Draw Down Notice caused the Company to issue or sell or the 2013 Investors to acquire or purchase an aggregate dollar value of Shares that exceeded the Total Commitment, (iii) the sale of Shares pursuant to the Draw Down Notice caused the Company to sell or the 2013 Investors to purchase an aggregate number of shares of the Company’s common stock which resulted in the collective beneficial ownership by the 2013 Investors of more than 9.99% of the Company’s common stock (as calculated pursuant to Section 13(d) of the Securities Exchange Act of 1934, as amended, and the rules and regulations thereunder), or (iv) the applicable Floor Price was less than $0.03875 on the Applicable Draw Down Exercise Date. The Company could not make more than one draw down in any Pricing Period and must have allowed two (2) trading days to elapse between the completion of the settlement of any one draw down and the commencement of a Pricing Period for any other draw down.

On February 11, 2014, an initial registration statement covering 96,555,893 shares issued and issuable pursuant to the 2013 Purchase Agreement was declared effective by the SEC.

As of September 30, 2014, the Company had received an aggregate of $16,000 under the 2013 Purchase Agreement through the issuance of 85,355,615 shares of its common stock at a weighted average price of $0.19 per share. On August 22, 2014, the Company voluntarily terminated the 2013 Purchase Agreement, effective August 25, 2014.

July 2012 Private Placement

On July 2, 2012, the Company entered into a private placement transaction (the “July 2012 Private Placement”) pursuant to which the Company issued $12,000 in principal amount of senior convertible notes that were due on September 1, 2013. The notes were convertible into shares of the Company’s common stock at a conversion price of $0.352 per share. The notes bore interest at 8% per annum and were payable in twelve equal monthly installments of principal and interest beginning on October 1, 2012. Each monthly installment payment was payable in cash, shares of the Company’s common stock, or a combination thereof. If paid in shares, such shares were valued at the lower of (i) the then applicable conversion price or (ii) a price that was 87.5% of the arithmetic average of the ten (or in some cases fewer) lowest weighted average prices of the Company’s common stock during the twenty trading day period ending two trading days before the payment date or the date on which the Company elected to pay in shares, whichever was lower. As of July 17, 2013, the Company had issued 163,641,547 shares of common stock in full satisfaction of the notes (see note 7).

11

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

For the Nine Months Ended September 30, 2014 and 2013

(numbers in thousands, except share and  per share data)

(unaudited)

As a part of the July 2012 Private Placement, the Company issued warrants to purchase 18,750,000 shares of the Company’s common stock at an exercise price of $0.384 per share (reduced to $0.19 per share under the anti-dilution and price reset provisions of the warrants, see note 8), and such warrants first became exercisable on January 2, 2013 which was six months after the issuance date thereof. In the event that the Company issues or sells shares of the Company’s common stock at a price per share that is less than the exercise price then in effect, the exercise price of the warrants will be reduced based on a weighted-average formula. In addition, on the two year anniversary of the issuance date, the then applicable exercise price was reset to equal 87.5% of the arithmetic average of the ten lowest weighted average prices of the common stock during the twenty trading day period ending two trading days immediately preceding the reset date. All of the warrants will expire on July 2, 2017 (see note 8).

June 2012 Visser MTA Agreement

On June 1, 2012, the Company entered into a Master Transaction Agreement (the “Visser MTA Agreement”) with Visser Precision Cast, LLC (“Visser”) relating to a strategic transaction for manufacturing services and financing.

Under the manufacturing and service component of the Visser MTA Agreement, the Company had agreed to engage Visser as a perpetual, exclusive manufacturer of non-consumer electronic products and to not, directly or indirectly, conduct manufacturing operations, subcontract for the manufacture of products or components or grant a license to any other party to conduct manufacturing operations, except for certain limited exceptions. Under the financing component of the Visser MTA Agreement, the Company issued and sold to Visser in a private placement transaction (i) 30,000,000 shares of common stock at a purchase price of $0.10 per share resulting in proceeds of $3,000, (ii) warrants to purchase 15,000,000 shares of common stock at an original exercise price of $0.22 per share which were to expire on June 1, 2017 and (iii) a secured convertible promissory note in the aggregate principal amount of up to $2,000. No borrowings were made by the Company under the promissory note, and the deadline for making borrowings under the facility expired on November 15, 2012.

In November 2013, the Company and Visser entered into arbitration proceedings to resolve disputes associated with the Visser MTA Agreement.

On May 20, 2014, the Company and Visser entered into a settlement under which they agreed to terminate the existing arbitration proceedings, release each other from all claims they may have had against each other and substantially change the business relationship that had been reflected in the original Visser MTA Agreement. As part of the settlement, the parties have amended and restated the sublicense and financing components of the Visser MTA Agreement. Additionally, the manufacturing services component and remaining considerations of the Visser MTA Agreement were terminated.

Under the amended and restated sublicense agreement, the Company has granted to Visser a fully paid-up, royalty-free, irrevocable, perpetual, worldwide, non-transferable, nonexclusive sublicense to all of the Company’s intellectual property developed on or prior to May 20, 2014 (the “Effective Date”), for all fields of use other than certain excluded fields as set forth therein. Visser does not have any rights, now or in the future, to intellectual property of the Company developed after the Effective Date of the agreement. The license to the Company’s intellectual property developed on or prior to the Effective Date does not include the right to use the “Liquidmetal” trademark or any of the Company’s other trademarks, except in certain defined situations, as set forth in the amended and restated agreement.

With the foregoing revised arrangements, the Company is no longer required to use Visser as its exclusive manufacturer and is free to license other manufacturers on a non-exclusive basis in any industry or geographic market as to which the Company has not previously granted an exclusive license to a third party. Any such manufacturers licensed by the Company in the future will be able both to manufacture parts for the Company and the Company’s customers, and manufacture and sell products for their own account for such industries or markets as the Company may agree, subject to whatever royalty arrangements the Company may negotiate. The Company has not yet licensed any manufacturers other than Visser. Visser will also have the right to manufacture and sell products under the amended and restated sublicense agreement.

The settlement amends and restates two warrants the Company issued to Visser in June 2012 to purchase 15,000,000 shares of the Company’s common stock at an exercise price of $0.22 per share. Those warrants contained anti-dilution mechanisms under which the number of shares issuable upon exercise of those warrants would be increased, and the exercise price for such shares would be reduced if the Company issued shares of its common stock at prices less than the warrants’ exercise price. The amended and restated warrant agreement includes the effect of such anti-dilution adjustments and is exercisable for 18,611,079 shares of common stock (increased further to 18,706,235 shares under the anti-dilution provisions of the warrants, see note 8) at an exercise price of $0.18 per share. The amended and restated warrant agreement continues to contain comparable anti-dilution adjustment mechanisms. The amended and restated warrant agreement also removes certain lock-up provisions that were included in the original warrants.

12

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

For the Nine Months Ended September 30, 2014 and 2013

(numbers in thousands, except share and  per share data)

(unaudited)

Apple License Transaction

On August 5, 2010, the Company entered into a license transaction with Apple Inc. (“Apple”) pursuant to which (i) the Company contributed substantially all of its intellectual property assets to a newly organized special-purpose, wholly-owned subsidiary, called Crucible Intellectual Property, LLC (“CIP”), (ii) CIP granted to Apple a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in the field of consumer electronic products, as defined in the license agreement, in exchange for a license fee, and (iii) CIP granted back to the Company a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in all other fields of use. Additionally, in connection with the license transaction, Apple required the Company to complete a statement of work related to the exchange of Liquidmetal intellectual property information. The Company recognized a portion of the one-time license fee upon receipt of the initial payment and completion of the foregoing requirements under the license transaction. The remaining portion of the one-time license fee was recognized at the completion of the required statement of work.

Under the agreements relating to the license transaction with Apple, the Company was obligated to contribute, to CIP, all intellectual property that it developed through February 2012. Subsequently, this obligation has been extended to apply to all intellectual property developed through February 2015. The Company is also obligated to maintain certain limited liability company formalities with respect to CIP at all times after the closing of the license transaction.

Other License Transactions

On January 31, 2012, the Company entered into a Supply and License Agreement for a five year term with Engel Austria Gmbh (“Engel”) whereby Engel was granted a non-exclusive license to manufacture and sell injection molding machines to the Company’s licensees. Since that time, the Company and Engel have agreed on an injection molding machine configuration that can be commercially supplied and supported by Engel.  On December 6, 2013, the companies entered into an Exclusive License Agreement for a 10 year term whereby Engel was granted an exclusive license to manufacture and sell injection molding machines to the Company’s licensees in exchange for certain royalties to be paid by Engel to the Company based on a percentage of the net sales price of such injection molding machines.

The Company’s Liquidmetal Golf subsidiary has the exclusive right and license to utilize the Company’s Liquidmetal alloy technology for purposes of golf equipment applications. This right and license is set forth in an intercompany license agreement between Liquidmetal Technologies and Liquidmetal Golf. This license agreement provides that Liquidmetal Golf has a perpetual and exclusive license to use Liquidmetal alloy technology for the purpose of manufacturing, marketing, and selling golf club components and other products used in the sport of golf. The Company owns 79% of the outstanding common stock of Liquidmetal Golf.

In June 2003, the Company entered into an exclusive license agreement with LLPG, Inc. (“LLPG”).  Under the terms of the agreement, LLPG has the right to commercialize Liquidmetal alloys, particularly precious-metal based compositions, in jewelry and high-end luxury product markets.  The Company, in turn, will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by LLPG. The exclusive license agreement with LLPG expires on December 31, 2021.

In March 2009, the Company entered into a license agreement with Swatch Group, Ltd. (“Swatch”) under which Swatch was granted a perpetual non-exclusive license to the Company’s technology to produce and market watches and certain other luxury products. In March 2011, this license agreement was amended to grant Swatch exclusive rights as to watches, and the Company’s license agreement with LLPG was simultaneously amended to exclude watches from LLPG’s rights. The Company will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by Swatch. The license agreement with Swatch will expire on the expiration date of the last licensed patent.

4. Liquidity and Capital Resources

For the nine months ended September 30, 2014, the Company’s cash used in operations was $5,630, cash used in investing activities was $961, primarily consisting of capital expenditures to support the manufacturing efforts of the Company, and cash provided by financing activities was $16,431. As of September 30, 2014, the Company’s cash balance was $11,902.

On August 20, 2014, the Company entered into the 2014 Purchase Agreement which allows it to raise up to $30,000 through periodic issuances of common stock over a three year period. As of September 30, 2014, the Company has not executed any transactions under this agreement.

On November 8, 2013, the Company entered into the 2013 Purchase Agreement which allowed it to raise up to $20,000 through periodic issuances of common stock over a three year period. Throughout 2014, the Company received an aggregate of $16,000 under the 2013 Purchase Agreement through the issuance of 85,355,615 shares of its common stock at a weighted average price of $0.19 per share. This agreement was effectively terminated on August 25, 2014.

13

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

For the Nine Months Ended September 30, 2014 and 2013

(numbers in thousands, except share and  per share data)

(unaudited) 

The Company anticipates that its current capital resources, when considering expected losses from operations, will be sufficient to fund the Company’s operations through the end of 2015. The Company has a relatively limited history of producing bulk amorphous alloy components and products on a mass-production scale. Furthermore, the ability of future contract manufacturers to produce the Company’s products in desired quantities and at commercially reasonable prices is uncertain and is dependent on a variety of factors that are outside of the Company’s control, including the nature and design of the component, the customer’s specifications, and required delivery timelines. These factors will likely require that the Company make future equity sales under the 2014 Purchase Agreement, raise additional funds by other means, or pursue other strategic initiatives to support its operations beyond the end of 2015. There is no assurance that the Company will be able to make equity sales under the 2014 Purchase Agreement or raise additional funds by other means on acceptable terms, if at all. If the Company were to make equity sales under the 2014 Purchase Agreement or to raise additional funds through other means by issuing securities, existing stockholders may be diluted. If funding is insufficient at any time in the future, the Company may be required to alter or reduce the scope of its operations or to cease operations entirely.

5. Prepaid Expenses and Other Current Assets

Prepaid expenses and other current assets totaled $421 and $412 as of September 30, 2014 and December 31, 2013, respectively and primarily consisted of prepaid invoices and insurance premiums that will be reclassified to expense as shipments are made to customers or services are provided.

6. Patents and Trademarks, net

Net patents and trademarks totaled $695 and $764 as of September 30, 2014 and December 31, 2013, respectively, and primarily consisted of purchased patent rights and internally developed patents.

Purchased patent rights represent the exclusive right to commercialize the bulk amorphous alloy and other amorphous alloy technology acquired from California Institute of Technology (“Caltech”), through a license agreement with Caltech and other institutions. All fees and other amounts payable by the Company for these rights and licenses have been paid or accrued in full, and no further royalties, license fees or other amounts will be payable in the future under the license agreement.

In addition to the purchased and licensed patents, the Company has internally developed patents. Internally developed patents include legal and registration costs incurred to obtain the respective patents. The Company currently holds various patents and numerous pending patent applications in the United States, as well as numerous foreign counterparts to these patents outside of the United States.

The Company amortizes capitalized patents and trademarks over an average of 10 to 17 year periods. Amortization expense for patents and trademarks was $78 and $90 for the nine month periods ended September 30, 2014 and 2013, respectively.

7. Convertible Note and Embedded Conversion Feature Liability

On July 2, 2012, the Company entered into the July 2012 Private Placement pursuant to which it issued $12,000 in principal amount of Senior Convertible Notes (“Senior Convertible Notes”) that were due on September 1, 2013 (see note 3). Pursuant to ASC 815-40, due to the anti-dilution provision of the Senior Convertible Notes, the conversion feature of the Senior Convertible Notes is not indexed to the Company’s own stock and should be bifurcated and recognized as a derivative liability in the consolidated balance sheets and measured at fair value. The Senior Convertible Notes bore interest at 8% per annum and were payable in twelve equal monthly installments of principal and interest beginning on October 1, 2012.

The embedded conversion feature liability and warrants issued in connection with the Senior Convertible Notes were valued utilizing the Monte Carlo simulation and Black Sholes pricing model at $8,865 and $5,053, respectively, totaling $13,918 as of July 2, 2012. $12,000 of this total was recorded as debt discount and the excess of the face value of the embedded conversion feature liability and warrants of $1,918 was booked to debt discount amortization on July 2, 2012.

Pursuant to the terms of the Senior Convertible Notes, the Company opted to pay the first eleven monthly installment payments due prior to June 30, 2013 with shares of the Company’s common stock. On July 17, 2013, the Company and each of the holders of the Senior Convertible Notes agreed to cause all remaining principal and interest under the Senior Convertible Notes to be converted into an aggregate of 18,679,584 shares of the Company’s common stock in full satisfaction of the notes.  As a result of this conversion, the Senior Convertible Notes were paid off in full and are no longer outstanding as of the conversion date. As the final conversion occurred pursuant to terms that were not included in the original terms of the Senior Convertible Notes, the Company recorded a gain on extinguishment of debt in the amount of $91 which consisted of the write-off of unamortized debt discount, unamortized debt issuance costs, embedded conversion feature liabilities, and the difference between the reacquisition price of the shares issued and the contractual conversion price of the Senior Convertible Notes.

Upon final settlement, the Company had issued 163,641,547 shares of common stock, at a weighted average conversion price of $0.0774, for the twelve installment payments due under the Senior Convertible Notes, consisting of $12,000 principal and $680 of interest.

Interest expense on the Senior Convertible Notes was $0 and $221 for the nine month periods ended September 30, 2014 and 2013, respectively.

14

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

For the Nine Months Ended September 30, 2014 and 2013

(numbers in thousands, except share and  per share data)

(unaudited)

8. Warrant Liability

Pursuant to FASB ASC 815, the Company is required to report the value of certain warrants as a liability at fair value and record the changes in the fair value of the warrant liabilities as a gain or loss in its statement of operations due to the price-based anti-dilution rights of the warrants.

During June 2012, the Company issued warrants to purchase a total of 15,000,000 shares of common stock to Visser under the Visser MTA Agreement (see note 3). These warrants had an original exercise price of $0.22 per share, expire on June 1, 2017 and were originally valued at $4,260. These warrants have certain anti-dilution provisions which qualify the warrants to be classified as a liability under FASB ASC 815. As a result of paying down the Senior Convertible Notes with common stock and stock issuances under the 2013 Purchase Agreement, which resulted in an anti-dilution impact, the exercise price of these warrants was reduced to $0.18 as of both September 30, 2014 and December 31, 2013. In addition, the number of shares to be issued under the warrants as a result of the anti-dilution provisions increased to 18,706,235 as of September 30, 2014 and 18,562,825 as of December 31, 2013. As of September 30, 2014, these warrants were valued at $2,592 under the Black Sholes valuation model utilizing the following assumptions: (i) expected life of 2.67 years, (ii) volatility of 119%, (iii) risk-free interest rate of 1.07%, and (iv) dividend rate of 0. The change in warrant value for these warrants for the nine months ended September 30, 2014 was a loss of $33.

On July 2, 2012, the Company issued warrants to purchase a total of 18,750,000 shares of common stock related to the July 2012 Private Placement (see note 3). These warrants have an exercise price of $0.384 per share, expire on July 2, 2017 and were originally valued at $5,053. The foregoing warrants have certain anti-dilution and exercise price reset provisions which qualify the warrants to be classified as a liability under FASB ASC 815. As a result of executed draw-downs under the 2013 Purchase Agreement, which resulted in an anti-dilution impact, as well as contractually defined price resets following the second anniversary of the July 2012 Private Placement, the exercise price of these warrants was reduced to $0.19 as of September 30, 2014. As of September 30, 2014, these warrants were valued at $2,389 under the Black Sholes valuation model utilizing the following assumptions: (i) expected life of 2.75 years, (ii) volatility of 117%, (iii) risk-free interest rate of 1.07%, and (iv) dividend rate of 0. The change in warrant value for these warrants for the nine months ended September 30, 2014 was a loss of $243.

On July 8, 2014, an investor party to the July 2012 Private Placement exercised 1,178,000 warrants at an exercise price of $0.19 per share. Upon exercise, the Company received $226, and the associated warrant liability of $216 was reclassified to additional paid in capital.

The following table summarizes the change in the Company’s warrant liability as of September 30, 2014:

	Visser MTA		July 2, 2012
	Agreement		Private Placement			Total
Beginning Balance - December 31, 2013	$	2,559	$	2,362			4,921
Change in value of warrant liability, loss	$	33	$	243			276
Reclassification to equity upon warrant exercise		-		(216	)		(216	)
Ending Balance - September 30, 2014	$	2,592	$	2,389		$	4,981

The Company had warrants to purchase 66,057,792 and 67,092,382 shares of common stock outstanding as of September 30, 2014 and December 31, 2013, respectively. Of these, warrants to purchase 36,278,235 shares were valued and classified as a liability under FASB ASC 815.

9. Other Long-term Liabilities  

Other long-term liabilities balance was $856 as of September 30, 2014 and December 31, 2013, and consisted of long-term, aged payables to vendors, individuals, and other third parties that have been outstanding for more than 5 years. The Company is in the process of researching and resolving the balances for settlement and/or write-off in accordance with applicable accounting rules.

10. Stock Compensation Plan

Under the Company’s 2002 Equity Incentive Plan (the “2002 Plan”), which provided for the grant of stock options to officers, employees, consultants and directors of the Company and its subsidiaries, the Company granted options to purchase the Company’s common stock.A total of 10,000,000 shares of our common stock were available for issuance under the 2002 Plan. The 2002 Plan expired by its terms in April 2012, but it will remain in effect only with respect to the equity awards that had been granted prior to its expiration. The Company had outstanding grants of options to purchase 1,733,000 and 2,607,000 shares of the Company’s common stock under the 2002 Plan as of September 30, 2014 and December 31, 2013, respectively.

 15

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

For the Nine Months Ended September 30, 2014 and 2013

(numbers in thousands, except share and  per share data)

(unaudited)

On June 28, 2012, the Company adopted the 2012 Equity Incentive Plan, with the approval of the stockholders, which provides for the grant of stock options to officers, employees, consultants and directors of the Company and its subsidiaries. A total of 30,000,000 shares of our common stock are available for issuance under the 2012 Equity Incentive Plan. All options granted under this plan have exercise prices that are equal to the fair market value on the dates of grant. During the nine months ended September 30, 2014, the Company granted options to purchase 15,292,914 shares of common stock under this plan. Under this plan, the Company has outstanding grants of options to purchase 25,917,066 and 13,127,500 shares of the Company’s common stock as of September 30, 2014 and December 31, 2013, respectively.

Stock based compensation expense attributable to these plans was $226 and $652 for the three and nine months ended September 30, 2014, respectively, compared to $50 and $134 for the three and nine months ended September 30, 2013. The increase was due to higher grant date fair values associated with 2014 stock option grants.

11. Stockholders’ Equity (Deficit)

Common stock

In June 2012, the Company issued 30,000,000 shares of common stock to Visser in connection with the Visser MTA Agreement (see note 3).

Pursuant to the terms of the Company’s Senior Convertible Notes issued in the July 2012 Private Placement, the Company opted to pay the twelve monthly installment payments prior to the September 1, 2013 maturity date with shares of the Company’s common stock. Upon final settlement, the Company had issued 163,641,547 shares of common stock at a weighted average conversion price of $0.0774, for the twelve installment payments due under the notes, consisting of $12,000 principal and $680 of interest (see notes 3 and 7).

During the year ended December 31, 2013, the holders of the Company’s Series A Preferred Stock converted all of the outstanding 506,936 shares of Series A Preferred Stock into 16,896,070 shares of the Company’s common stock (see “Preferred stock” below). After giving effect to such conversion, the Company has no shares of preferred stock outstanding.

On February 28, 2013, the Company’s stockholders approved an amendment to the Certificate of Incorporation of the Company increasing the number of authorized shares of common stock from 400 million shares to 500 million shares.

On October 24, 2013, the Company’s stockholders approved an amendment to the Company’s Certificate of Incorporation increasing the number of authorized shares of common stock from 500 million shares to 700 million shares.

In connection with the execution of the 2013 Purchase Agreement, the Company issued to each of the 2013 Investors a pro rata portion of 2,666,667 shares of the Company’s common stock. As of September 30, 2014, the Company had received an aggregate of $16,000 under the 2013 Purchase Agreement through the issuance of 85,355,615 share of its common stock at a weighted average issuance price of $0.19 (see note 3).

During the nine months ended September 30, 2014, the Company issued 2,242,014 shares of common stock and received $205 in connection with stock options that were exercised by certain employees of the Company at a weighted average exercise price of $0.09.

Preferred stock

On May 1, 2009, pursuant to a Securities Purchase and Exchange Agreement, the Company issued 500,000 shares of convertible Series A-1 Preferred Stock with an original issue price of $5.00 per share and 2,625,000 shares of Series A-2 Preferred Stock with an original issue price of $5.00 per share as part of a financing transaction (The Series A-1 Preferred Stock and the Series A-2 Preferred Stock are referred to collectively herein as the “Series A Preferred Stock”). In connection with this Series A Preferred Stock issuance, the Company issued warrants to purchase 42,329,407 shares of the Company’s common stock at an exercise price of $0.50 per share, which was subsequently adjusted to $0.49 per share due to an anti-dilution calculation. These warrants expire on July 15, 2015.

In October 2009, the Company entered into an agreement with various investors to issue 180,000 shares of Series A-1 Preferred Stock with identical terms as the Series A-1 Preferred Stock issued on May 1, 2009. In connection with this issuance, the Company issued warrants to purchase up to 4,500,000 shares of common stock with an exercise price of $0.50 per share, which was subsequently adjusted to $0.49 per share due to an anti-dilution calculation. These warrants also expire on July 15, 2015.

The Series A Preferred Stock and any accrued and unpaid dividends thereon was convertible, at the option of the holders of the Series A Preferred Stock, into common stock of the Company at a conversion price of $0.10 per share in the case of the Series A-1 Preferred Stock and a conversion price of $0.22 per share in the case of the Series A-2 Preferred Stock (in both cases subject to adjustments for any stock dividends, splits, combinations and similar events).

During the year ended December 31, 2012, the holders of the Company’s Series A Preferred Stock converted 792,215 shares of Series A Preferred Stock into 25,669,752 shares of the Company’s common stock. As of December 31, 2012, the Company had 506,936 shares of Series A Preferred Stock outstanding, consisting of 105,231 and 401,705 shares of Series A-1 and Series A-2 Preferred Stock, respectively. Accrued dividends on the Series A Preferred Stock as of December 31, 2012 were $222.

During the year ended December 31, 2013, all of the holders of the Company’s Series A Preferred Stock converted all of the outstanding shares of Series A Preferred Stock and accrued dividends into 16,896,070 shares of the Company’s common stock. Therefore, as of December 31, 2013, the Company no longer had any outstanding Series A Preferred Stock and the related $222 of accrued dividends were reclassified to additional paid-in capital as of December 31, 2013.

16

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

For the Nine Months Ended September 30, 2014 and 2013

(numbers in thousands, except share and  per share data)

(unaudited) 

Warrants

In connection with the Series A Preferred Stock issuances, warrants to purchase 29,779,557 shares of the Company’s common stock were outstanding as of September 30, 2014 and December 31, 2013. Due to extension of the expiration date of these warrants, they no longer contain anti-dilution provisions and are reflected as equity as they do not meet the criteria under FASB ASC 815 for liability treatment. Warrants classified as equity were recorded at $18,179 as of September 30, 2014 and December 31, 2013. Such warrants have exercise prices ranging between $0.48 and $0.49 and expire on July 15, 2015.

Non-Controlling Interest

The Company’s Liquidmetal Golf subsidiary has the exclusive right and license to utilize the Company’s Liquidmetal alloy technology for purposes of golf equipment applications. Liquidmetal Technologies owns 79% of the outstanding common stock of Liquidmetal Golf. As of September 30, 2014, non-controlling interest was a deficit of $52. The December 31, 2013 non-controlling interest was a deficit of $42.

12. Loss Per Common Share

Basic earnings per share (“EPS”) is computed by dividing earnings (loss) attributable to common stockholders by the weighted average number of common shares outstanding for the applicable periods. Diluted EPS reflects the potential dilution of securities that could share in the earnings.

Options to purchase 27,650,066 shares of common stock, at prices ranging from $0.08 to $2.33 per share, were outstanding at September 30, 2014, but were not included in the computation of diluted EPS for the same period as the inclusion would have been antidilutive, given the Company’s net loss. Warrants to purchase 66,057,792 shares of common stock, with prices ranging from $0.18 to $0.49 per share, outstanding at September 30, 2014 were not included in the computation of diluted EPS for the same period as the inclusion would have been antidilutive, given the Company’s net loss.

Options to purchase 15,397,500 shares of common stock, at prices ranging from $0.08 to $2.49 per share, were outstanding at September 30, 2013, but were not included in the computation of diluted EPS for the same period as the inclusion would have been antidilutive, given the Company’s net loss. Warrants to purchase 67,069,319 shares of common stock, with prices ranging from $0.18 to $0.49 per share, outstanding at September 30, 2013 were not included in the computation of diluted EPS for the same period as the inclusion would have been antidilutive, given the Company’s net loss.

13. Commitments and Contingencies

Operating Lease Commitments

The Company leases its office and warehouse facility under a lease agreement that expires on April 30, 2016. Rent payments are subject to escalations through the end of the lease term. Rent expense was $50 and $150 for the three and nine months ended September 30, 2014, respectively. Rent expense was $50 and $150 for the three and nine months ended September 30, 2013, respectively.

During October 2014 this lease agreement was amended to extend through July 2023 (see footnote 15).

14. Related Party Transactions

The Company entered into a license agreement (the “IMG License Agreement”) with Innovative Materials Group, LLC (“IMG”), a California limited liability company which is majority owned by Mr. Kang, a former Chief Executive Officer and former Chairman of the Company, to license certain patents and technical information for the limited purpose of manufacturing certain licensed products with the Company’s first generation die cast machines. The IMG License Agreement granted a non-exclusive license to certain product categories and obligated IMG to pay the Company a running royalty based on its sales of licensed products through August 5, 2021. The Company recognized $5 and $0 in royalty revenues from IMG during the nine months ended September 30, 2014 and September 30, 2013, respectively.

On February 1, 2012, Mr. Tony Chung, the Company’s Chief Financial Officer, converted his 10,000 shares of Series A-1 Preferred Stock into a total of 565,344 shares of the Company’s common stock, including dividends received in the form of common stock.

17

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

For the Nine Months Ended September 30, 2014 and 2013

(numbers in thousands, except share and  per share data)

(unaudited) 

In February 2013, Mr. Abdi Mahamedi, the Company’s Chairman, converted his 58,600 shares of Series A-1 Preferred Stock and 260,710 shares of Series A-2 Preferred Stock into a total of 10,387,883 shares of the Company’s common stock, including dividends received in the form of common stock.

Mr. Thomas Steipp, the Company’s Chief Executive Officer, sold an aggregate of 400,000 shares of the common stock of the Company on August 5, 2013 pursuant to a trading plan that Mr. Steipp previously adopted under SEC Rule 10b5-1 under the Securities Exchange Act of 1934, as amended. Mr. Steipp adopted the trading plan on March 22, 2013 for the purpose of providing him with funds to satisfy certain tax liabilities as a result of the vesting on August 3, 2013 of 1,200,000 shares of Company restricted common stock held by Mr. Steipp. The restricted shares were granted to Mr. Steipp in 2010 under a previously disclosed Restricted Stock Award Agreement, dated August 3, 2010, between Mr. Steipp and the Company. On March 27, 2014, Mr. Steipp adopted a new 10b5-1 trading plan that allowed for the sale of 500,000 shares of common stock of the Company on August 4, 2014, and will allow for future sales of 500,000 shares of common stock of the Company on August 4, 2015.

In September 2013, the Company entered into Change of Control Agreements with Ricardo A. Salas, the Company’s Executive Vice President, Tony Chung, the Company’s Chief Financial Officer, and certain other executive officers who are not named executive officers of the Company for SEC reporting purposes. The Change of Control Agreements provide that if the executive officer’s employment with the Company is terminated without cause during the one-year period after a change of control of the Company, then the terminated officer will receive lump sum severance compensation in an amount equal to twelve months of his then-current base salary. Under the agreements, each of the executive officers will also be entitled to the above-described severance compensation in the event he terminates his own employment within one year after a change of control because of a salary decrease or assignment to a lower-level position. In addition, upon termination, all unvested stock options related to these officers will automatically and immediately vest and shall thereafter be exercisable in accordance with the terms and provisions of the applicable award agreements.

The Company has an exclusive license agreement with LLPG, Inc. (“LLPG”), a corporation owned principally by Jack Chitayat, a former director of the Company. Under the terms of the agreement, LLPG has the right to commercialize Liquidmetal alloys, particularly precious-metal based compositions, in jewelry and high-end luxury product markets.  The Company, in turn, will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by LLPG.    The exclusive license agreement with LLPG expires on December 31, 2021. There were no revenues recognized from product sales and licensing fees from LLPG during the nine months ended September 30, 2014 or 2013.

On February 27, 2013, Mr. Chitayat converted his 28,928 shares of Series A-1 Preferred Stock and 109,528 shares of Series A-2 Preferred Stock into a total of 4,626,840 shares of the Company’s common stock, including dividends received in the form of common stock.

On June 1, 2012, the Company entered into the Visser MTA Agreement relating to a strategic transaction for manufacturing services and financing. In November 2013, the Company and Visser entered into arbitration proceedings to resolve disputes associated with this agreement. As part of the May 2014 settlement of these proceedings, the Company has granted to Visser a fully paid-up, royalty-free, irrevocable, perpetual, worldwide, non-transferable, nonexclusive sublicense to all of the Company’s intellectual property developed on or prior to May 20, 2014, for all fields of use other than certain excluded fields as set forth therein. Visser does not have any rights, now or in the future, to intellectual property of the Company developed after the Effective Date of the agreement. The license to the Company’s intellectual property does not include the right to use the “Liquidmetal” trademark or any of the Company’s other trademarks, except in certain defined situations, as set forth in the amended and restated agreement entered into in connection with the settlement (see note 3).

15. Subsequent Event

During October 2014, the Company has amended the lease agreement covering its office and warehouse facility for an additional seven year period subsequent to the original expiration of the existing lease. The terms of the amendment are consistent with those of the original lease.

18

Item 2 – Management’s Discussion and Analysis of Financial Condition and Results of Operations

This management’s discussion and analysis should be read in conjunction with the consolidated financial statements and notes included elsewhere in this Quarterly Report on Form 10-Q. All amounts described in this section are in thousands, except share and per share data.

This management’s discussion and analysis, as well as other sections of this Quarterly Report on Form 10-Q, may contain “forward-looking statements” that involve risks and uncertainties, including statements regarding our plans, future events, objectives, expectations, forecasts, or assumptions. Any statement that is not a statement of historical fact is a forward-looking statement, and in some cases, words such as “believe,” “estimate,” “project,” “expect,” “intend,” “may,” “anticipate,” “plan,” “seek,” and similar expressions identify forward-looking statements. These statements involve risks and uncertainties that could cause actual outcomes and results to differ materially from the anticipated outcomes or results, and undue reliance should not be placed on these statements. These risks and uncertainties include, but are not limited to, the matters discussed under the heading “Item 1A. Risk Factors” in our Annual Report on Form 10-K for the fiscal year ended December 31, 2013 and other risks and uncertainties discussed in other filings made with the Securities and Exchange Commission (including risks described in subsequent reports on Form 10-Q and Form 8-K and other filings). Liquidmetal Technologies disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events, or otherwise.

Overview

We are a materials technology company that develops and commercializes products made from amorphous alloys.  Our Liquidmetal® family of alloys consists of a variety of proprietary bulk alloys and composites that utilize the advantages offered by amorphous alloy technology. We design, develop and sell products and components from bulk amorphous alloys to customers in various industries. We also partner with third-party manufacturers and licensees to develop and commercialize Liquidmetal alloy products.

Amorphous alloys are, in general, unique materials that are distinguished by their ability to retain a random atomic structure when they solidify, in contrast to the crystalline atomic structures that form in other metals and alloys when they solidify. Liquidmetal alloys are proprietary amorphous alloys that possess a combination of performance, processing, and potential cost advantages that we believe will make them preferable to other materials in a variety of applications. The amorphous atomic structure of our alloys enables them to overcome certain performance limitations caused by inherent weaknesses in crystalline atomic structures, thus facilitating performance and processing characteristics superior in many ways to those of their crystalline counterparts. For example, in laboratory testing, our zirconium-titanium Liquidmetal alloys are approximately 250% stronger than commonly used titanium alloys such as Ti-6Al-4V, but they also have some of the beneficial processing characteristics more commonly associated with plastics. We believe these advantages could result in Liquidmetal alloys supplanting high-performance alloys, such as titanium and stainless steel, and other incumbent materials in a variety of applications. Moreover, we believe these advantages could enable the introduction of entirely new products and applications that are not possible or commercially viable with other materials.

Our revenues are derived from (i) selling our bulk Liquidmetal alloy products, which include non-consumer electronic devices, aerospace parts, medical products, automotive components, oil and gas exploration, and sports and leisure goods, (ii) selling tooling and prototype parts such as demonstration parts and test samples for customers with products in development, (iii) product licensing and royalty revenue, and (iv) research and development revenue.  

Our cost of sales consists primarily of the costs of outsourcing our manufacturing to third parties. Selling, general, and administrative expenses currently consist primarily of salaries and related benefits, travel, consulting and professional fees, depreciation and amortization, insurance, office and administrative expenses, and other expenses related to our operations.

Research and development expenses represent salaries, related benefits expense, depreciation of research equipment, consulting and contract services, expenses incurred for the design and testing of new processing methods, expenses for the development of sample and prototype products, and other expenses related to the research and development of Liquidmetal bulk alloys. Costs associated with research and development activities are expensed as incurred. We plan to enhance our competitive position by improving our existing technologies and developing advances in amorphous alloy technologies. We believe that our research and development efforts will focus on the discovery of new alloy compositions, the development of improved processing technology, and the identification of new applications for our alloys.

Licensing Transactions

Transaction with Visser Precision Cast, LLC

On June 1, 2012, we entered into a Master Transaction Agreement (the “Visser MTA Agreement”) with Visser Precision Cast, LLC (“Visser”) relating to a strategic transaction for manufacturing services and financing.

19

Under the manufacturing and service component of the Visser MTA Agreement, we had agreed to engage Visser as a perpetual, exclusive manufacturer of non-consumer electronic products and to not, directly or indirectly, conduct manufacturing operations, subcontract for the manufacture of products or components or grant a license to any other party to conduct manufacturing operations, except for certain limited exceptions. Under the financing component of the Visser MTA Agreement, we issued and sold to Visser in a private placement transaction (i) 30,000,000 shares of common stock at a purchase price of $0.10 per share resulting in proceeds of $3,000, (ii) warrants to purchase 15,000,000 shares of common stock at an original exercise price of $0.22 per share which were to expire on June 1, 2017 and (iii) a secured convertible promissory note in the aggregate principal amount of up to $2,000. No borrowings were made by us under the promissory note, and the deadline for making borrowings under the facility expired on November 15, 2012.

In November 2013, we entered into arbitration proceedings with Visser to resolve disputes associated with the Visser MTA Agreement.

On May 20, 2014, we and Visser entered into a settlement pursuant to which the parties agreed to terminate the existing arbitration proceedings, release each other from all claims we may have had against each other and substantially change the business relationship that had been reflected in the original Visser MTA Agreement. As part of the settlement, the parties have amended and restated the sublicense and financing components of the Visser MTA Agreement. Additionally, the manufacturing services component and remaining considerations of the Visser MTA Agreement were terminated.

Under the amended and restated sublicense agreement, we have granted to Visser a fully paid-up, royalty-free, irrevocable, perpetual, worldwide, non-transferable, nonexclusive sublicense to all of our intellectual property developed on or prior to May 20, 2014 (the “Effective Date”), for all fields of use other than certain excluded fields as set forth therein. Visser does not have any rights, now or in the future, to our intellectual property developed after the Effective Date of the agreement. The license to our intellectual property developed on or prior to the Effective Date does not include the right to use the “Liquidmetal” trademark or any of our other trademarks, except in certain defined situations, as set forth in the amended and restated agreement.

With the foregoing revised arrangements, we are no longer required to use Visser as our exclusive manufacturer and are free to license other manufacturers on a non-exclusive basis in any industry or geographic market as to which we have not previously granted an exclusive license to a third party. Any such manufacturers licensed by us in the future will be able both to manufacture parts for us and our customers, and manufacture and sell products for their own account for such industries or markets as we may agree, subject to whatever royalty arrangements we may negotiate. We have not yet licensed any manufacturers other than Visser. Visser will also have the right to manufacture and sell products under the amended and restated sublicense agreement.

The settlement amends and restates two warrants we issued to Visser in June 2012 to purchase 15,000,000 shares of our common stock at an exercise price of $0.22 per share. Those warrants contained anti-dilution mechanisms under which the number of shares issuable upon exercise of those warrants would be increased, and the exercise price for such shares would be reduced if we issued shares of our common stock at prices less than the warrants’ exercise price. The amended and restated warrant agreement includes the effect of such anti-dilution adjustments and is exercisable for 18,611,079 shares of common stock (increased further to 18,706,235 shares under the anti-dilution provisions of the warrants, see note 8) at an exercise price of $0.18 per share. The amended and restated warrant agreement continues to contain comparable anti-dilution adjustment mechanisms. The amended and restated warrant agreement also removes certain lock-up provisions that were included in the original warrants.

Apple License Transaction

On August 5, 2010, we entered into a license transaction with Apple Inc. (“Apple”) pursuant to which (i) we contributed substantially all of our intellectual property assets to a newly organized special-purpose, wholly-owned subsidiary, called Crucible Intellectual Property, LLC (“CIP”), (ii) CIP granted to Apple a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in the field of consumer electronic products, as defined in the license agreement, in exchange for a license fee, and (iii) CIP granted back to us a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in all other fields of use.

Under the agreements relating to the license transaction with Apple, we were obligated to contribute to CIP all intellectual property that we developed through February 2012 (“Capture Period”). Subsequently, we have amended the Capture Period to extend through February 2015. We are also obligated to maintain certain limited liability company formalities with respect to CIP at all times after the closing of the license transaction.

Other License Transactions

On January 31, 2012, we entered into a Supply and License Agreement for a five year term with Engel Austria Gmbh (“Engel”) whereby Engel was granted a non-exclusive license to manufacture and sell injection molding machines to our licensees. Since that time, we and Engel have agreed on an injection molding machine configuration that can be commercially supplied and supported by Engel. On December 6, 2013, the companies entered into an Exclusive License Agreement for a 10 year term whereby Engel was granted an exclusive license to manufacture and sell injection molding machines to our licensees in exchange for certain royalties to be paid by Engel to us based on a percentage of the net sales price of such injection molding machines.

Our Liquidmetal Golf subsidiary has the exclusive right and license to utilize our Liquidmetal alloy technology for purposes of golf equipment applications. This right and license is set forth in an intercompany license agreement between Liquidmetal Technologies and Liquidmetal Golf. This license agreement provides that Liquidmetal Golf has a perpetual and exclusive license to use Liquidmetal alloy technology for the purpose of manufacturing, marketing, and selling golf club components and other products used in the sport of golf. We own 79% of the outstanding common stock of Liquidmetal Golf.

20

In June 2003, we entered into an exclusive license agreement with LLPG, Inc. (“LLPG”). Under the terms of the agreement, LLPG has the right to commercialize Liquidmetal alloys, particularly precious-metal based compositions, in jewelry and high-end luxury product markets. We, in turn, will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by LLPG. The exclusive license agreement with LLPG expires on December 31, 2021.

In March 2009, we entered into a license agreement with Swatch Group, Ltd. (“Swatch”) under which Swatch was granted a perpetual non-exclusive license to our technology to produce and market watches and certain other luxury products. In March 2011, this license agreement was amended to grant Swatch exclusive rights as to watches, and our license agreement with LLPG was simultaneously amended to exclude watches from LLPG’s rights. We will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by Swatch. The license agreement with Swatch will expire on the expiration date of the last licensed patent.

Critical Accounting Policies and Estimates

The preparation of consolidated financial statements in conformity with accounting principles generally accepted in the United States requires us to make estimates and assumptions that affect reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. These estimates and assumptions are based on historical experience and various other factors that are believed to be reasonable under the circumstances. Actual results could differ materially from these estimates under different assumptions or conditions.

We believe that the following accounting policies are the most critical to our consolidated financial statements since these policies require significant judgment or involve complex estimates that are important to the portrayal of our financial condition and operating results:

• Revenue recognition

• Impairment of long-lived assets and definite-lived intangibles

• Deferred tax assets

• Valuation of liability classified warrants

• Debt discount

• Share based compensation

Our Annual Report on Form 10-K for the year ended December 31, 2013 (the “2013 Annual Report”) contains further discussions on our critical accounting policies and estimates.

21

Results of Operations  

Comparison of the three and nine months ended September 30, 2014 and 2013

					For the three months ended September 30,												For the nine months ended September 30,
	2014						2013						2014						2013
	in 000's			% of Products Revenue			in 000's			% of Products Revenue			in 000's			% of Products Revenue			in 000's			% of Products Revenue
Revenue:
Products	$	97					$	456					$	374					$	721
Licensing and royalties		-						-						36						7
Total revenue		97						456						410						728
Cost of sales		85			88	%		396			87	%		300			80	%		589			82	%
Gross margin		12			12	%		60			13	%		110			29	%		139			19	%
Selling, marketing general and administrative		1,847			1904	%		1,213			266	%		5,719			1529	%		3,735			518	%
Research and development		498			513	%		368			81	%		1,224			327	%		829			115	%
Operating loss		(2,333	)					(1,521	)					(6,833	)					(4,425	)
Change in value of warrants, gain (loss)		1,595						(2,511	)					(276	)					(1,715	)
Change in value of embedded conversion feature liabilities, gain		-						(2,435	)					-						621
Debt discount amortization expense		(321	)					(361	)					(373	)					(6,504	)
Interest expense		-						(21	)					-						(242	)
Interest and other income		41						1						43						5
Gain on extinguishment of debt		-						91						-						91
Net loss		(1,018	)					(6,757	)					(7,439	)					(12,169	)

In discussing our results of our operations, we have categorized the specific items of our statements of operations into various categories to facilitate the understanding of our core business operations. Explanations of each category as well as analyses of specific items contained in that category are discussed below:

Operating revenue and expenses

The “Operating revenue and expenses” category of statements of operations items represent those items that pertain to our core operations in the bulk alloy manufacturing and licensing business as follows:

Revenue. Total revenue decreased to $97 for the three months ended September 30, 2014 from $456 for the three months ended September 30, 2013. Total revenue also decreased for the nine months ended September 30, 2014 to $410 from $728 for the same period in 2013. The decrease for the periods was primarily attributable to a reduction in research and development services to licensees during 2014 as a result of increases in prototyping activities with potential customers to support the commercialization of our technology.

Cost of sales. Cost of sales was $85, or 88% of products revenue, for the three months ended September 30, 2014, a decrease from $396, or 87% of products revenue, from the three months ended September 30, 2013. Cost of sales was $300, or 80% of products revenue, for the nine months ended September 30, 2014, a decrease from $589, or 82% of products revenue, from the nine months ended September 30, 2013. The cost to manufacture parts from our bulk alloys manufacturing business is variable and differs based on the unique design of each product. In addition, much of our current product mix consists of prototype parts and other revenue which have higher internal variable cost percentages, relative to products revenue, than would otherwise be incurred by contract manufacturers. Therefore, our cost of sales as a percentage of products revenue may not be representative of our future cost percentages. When and if we begin increasing our products revenues with shipments of routine, commercial parts through a third party contract manufacturer, we expect our cost of sales percentages to stabilize and be more predictable.

22

Gross margin. Our gross margin decreased to $12 for the three month period ended September 30, 2014, from $60 for the three month period ended September 30, 2013. Our gross margin, as a percentage of products revenue, decreased to 12% for the three month period ended September 30, 2014, from 13% for the three month period ended September 30, 2013. Our gross margin decreased to $110 for the nine month period ended September 30, 2014, from $139 for the nine month period ended September 30, 2013. Our gross margin, as a percentage of products revenue, increased to 29% for the nine month period ended September 30, 2014, from 19% for the nine month period ended September 30, 2013. As discussed above under “Cost of sales”, much of our current product mix consists of prototype parts and other revenue which have higher internal variable cost percentages, relative to revenue, than would otherwise be incurred by contract manufacturers. As such, our gross margin percentages may fluctuate based on volume and quoted production prices per unit and may not be representative of our future business. When and if we begin increasing our revenues with shipments of routine, commercial parts through a third party contract manufacturer, we expect our gross margin percentages to stabilize and be more predictable.

Selling, Marketing, General, and Administrative. Selling, marketing, general and administrative expenses were $1,847 and $5,719 for the three and nine months ended September 30, 2014, respectively, compared to $1,213 and $3,735 for the three and nine months ended September 30, 2013, respectively. The increase in expense for both the three and nine month periods is due to additional legal costs incurred in conjunction with the arbitration proceeding and settlement discussions with Visser, increases in stock based compensation due to higher grant date fair values associated with 2014 stock option grants, and increased payroll expenses associated with additional personnel hires to support our sales and marketing efforts.

Research and Development. Research and development expenses increased to $498 and $1,224 for the three and nine months ended September 30, 2014, respectively, from $368 and $829 for the three and nine months ended September 30, 2013, respectively. The increase from the prior year was mainly due to additional company research projects during 2014. We continue to (i) perform research and development of new Liquidmetal alloys and related processing capabilities, (ii) develop new manufacturing techniques, and (iii) contract with consultants to advance the development of Liquidmetal alloys and related production processes.

Operating loss. Operating loss was $2,333 and $6,833 for the three and nine month periods ended September 30, 2014, respectively. This compares to $1,521 and $4,425 for the three and nine month periods ended September 30, 2013, respectively. The change in our loss is primarily attributable to the increase in operating expenses, compounded by lower revenues, as discussed above.

We continue to invest in our technology infrastructure to expedite the adoption of our technology, but we have experienced long sales lead times for customer adoption of our technology. Until that time where we can either (i) increase our revenues with shipments of routine, commercial parts through a third party contract manufacturer or (ii) obtain significant licensing revenues, we expect to have operating losses for the foreseeable future.

Non-operational expenses

Our statement of operations contains various, significant items that are non-operational in nature. These categories of expenses may have significant gains and losses based on the volatility of our stock price as follows:

Change in Value of Warrants. The change in value of warrants was a non-cash gain (loss) of $1,595 and $(276) for the three and nine months ended September 30, 2014, respectively. The change in value of warrants was a non-cash loss of $2,511 and $1,715 for the three and nine months ended September 30, 2013, respectively. These gains and losses result from periodic valuation adjustments related to fluctuations in our stock price for warrants issued in connection with the Visser MTA Agreement and our Senior Convertible Notes issued in our private placement that closed in July 2012, as further described in note 3 to the accompanying consolidated financial statements (the “July 2012 Private Placement”). Changes in the value of our warrants are non-cash and do not affect the core operations of our business or liquidity.

Change in Value of Embedded Conversion Feature Liability. Change in value of embedded conversion feature liability was a non-cash (loss) gain of $(2,435) and $621 for the three and nine months ended September 30, 2013, respectively. As part of the final conversion on July 17, 2013 of the senior convertible notes issued in the July 2012 Private Placement, the associated embedded conversion liability was reduced to zero due to exercise of the conversion option and was included in the calculation of the resulting gain on extinguishment of the senior convertible notes (see note 7 in the accompanying footnotes to the consolidated financial statements). As a result, there was no activity for this transaction during the three and nine months ended September 30, 2014.

Debt Discount Amortization. Debt discount amortization expense was $321 and $373 for the three and nine month periods ended September 30, 2014, respectively. This compares to $361and $6,504 for the three and nine month periods ended September 30, 2013, respectively. For the three and nine months ended September 30, 2014, debt discount amortization primarily related to the periodic amortization of issuance costs associated with the 2013 Purchase Agreement and the write-off of such costs following the termination of the 2013 Purchase Agreement on August 25, 2014. Expense recorded for the three and nine months ended September 30, 2013 relates to the amortization of the original issue discount and deferred financing costs associated with the July 2012 Private Placement, as well as imputed interest related to discounted stock issuances in settlement of installment payments of senior secured notes.

Interest Expense. Interest expense for the three and nine months ended September 30, 2013 was $21 and $242, respectively, and consisted of the 8% interest related to the senior convertible notes issued as part of the July 2012 Private Placement. Following the full satisfaction of obligations under the senior convertible notes during July 2013, no such expense was recorded during the three and nine months ended September 30, 2014.

23

Interest and Other Income. Interest income relates to interest earned from our cash deposits for the respective periods. Such amounts were $11 and $14 for the three and nine month periods ended September 30, 2014, respectively. This compares to $1 and $5 for the three and nine month periods ended September 30, 2013. Included in other income for both the three and nine months ended September 30, 2014 is $20 for the sale of our remaining membership interest in a former subsidiary that was recorded as a cost method investment.

Gain on Extinguishment of Debt. Gain on extinguishment of debt was $91 for both the three and nine month periods ended September 30, 2013, respectively. The gain consisted of the write-off of unamortized debt discount, unamortized debt issuance costs, embedded conversion feature liabilities, and the difference between the reacquisition price of the shares issued and the contractual conversion price of the Senior Convertible Notes (see note 7 in the accompanying footnotes to the consolidated financial statements). No such gain was recorded during the three and nine months ended September 30, 2014.

Liquidity and Capital Resources 

For the nine months ended September 30, 2014, our cash used in operations was $5,630, cash used in investing activities was $961, primarily consisting of capital expenditures to support our manufacturing efforts, and cash provided by financing activities was $16,431. As of September 30, 2014, our cash balance was $11,902.

On August 20, 2014, we entered into the 2014 Purchase Agreement which allows us to raise up to $30,000 through periodic issuances of common stock over a three year period. As of September 30, 2014, we had not executed any transactions under this agreement. See note 3 in the accompanying footnotes to the consolidated financial statements for more information.

On November 8, 2013, we entered into the 2013 Purchase Agreement which allowed us to raise up to $20,000 through periodic issuances of common stock over a three year period. As of September 30, 2014, we had received an aggregate of $16,000 under the 2013 Purchase Agreement through the issuance of 85,355,615 shares of our common stock at a weighted average price of $0.19 per share. This agreement was effectively terminated on August 25, 2014.

We anticipate that our current capital resources, when considering expected losses from operations, will be sufficient to fund the our operations through the end of 2015. We have a relatively limited history of producing bulk amorphous alloy components and products on a mass-production scale. Furthermore, the ability of future contract manufacturers to produce our products in desired quantities and at commercially reasonable prices is uncertain and is dependent on a variety of factors that are outside of our control, including the nature and design of the component, the customer’s specifications, and required delivery timelines. These factors will likely require we make future equity sales under the 2014 Purchase Agreement, raise additional funds by other means, or pursue other strategic initiatives to support our operations beyond the end of 2015. There is no assurance that we will be able to make equity sales under the 2014 Purchase Agreement or raise additional funds by other means on acceptable terms, if at all. If we were to make equity sales under the 2014 Purchase Agreement or to raise additional funds through other means by issuing securities, existing stockholders may be diluted. If funding is insufficient at any time in the future, we may be required to alter or reduce the scope of our operations or to cease operations entirely.

Off Balance Sheet Arrangements 

As of September 30, 2014, we did not have any off-balance sheet arrangements.

Item 3 – Quantitative and Qualitative Disclosures about Market Risk

Not applicable.

Item 4 – Controls and Procedures

Evaluation of Disclosure Controls and Procedures. 

Under the supervision and with the participation of our management, including our Chief Executive Officer (Principal Executive Officer) and Chief Financial Officer (Principal Financial Officer), we carried out an evaluation of the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rule 13a-15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”)) as of September 30, 2014. Based on their evaluation, our Chief Executive Officer and Chief Financial Officer have concluded that our disclosure controls and procedures were effective as of September 30, 2014.

Changes in Internal Control over Financial Reporting.

There were no changes in our internal control over financial reporting (as that term is defined in Rules 13a-15(f) or 15d-15(f) under the Exchange Act) during the quarter ended September 30, 2014 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

24

PART II

OTHER INFORMATION

Item 1 – Legal Proceedings

There have been no significant developments with respect to legal proceedings specifically affecting Liquidmetal Technologies, Inc. since the filing of the 2013 Annual Report, except as follows:

In November 2013, we entered into arbitration proceedings with Visser with the Judicial Arbiter Group in Denver, Colorado. Both parties had filed claims alleging breaches of various obligations under the Visser MTA Agreement entered into on June 1, 2012.

On May 20, 2014, we and Visser agreed to terminate the existing arbitration proceedings, release each other from all claims we may have had against each other and substantially change the business relationship that had been reflected in the original Visser MTA Agreement. As part of the settlement, the parties have amended and restated the sublicense and financing components of the Visser MTA Agreement. Additionally, the manufacturing services component and remaining considerations of the Visser MTA Agreement were terminated. For additional information regarding the amended and restated agreement/ arrangements please see “Management’s Discussion and Analysis of Financial Condition and Results of Operations.”

Item 1A – Risk Factors

For a detailed discussion of the risk factors that should be understood by any investor contemplating an investment in our stock, please refer to Part I, Item 1A “Risk Factors” in the 2013 Annual Report.

Item 2 – Unregistered Sales of Equity Securities and Use of Proceeds

During the period covered by this Quarterly Report on Form 10-Q, we did not issue or sell any unregistered equity securities, except as previously disclosed in our Current Reports on Form 8-K.

Item 3 – Defaults Upon Senior Securities

None.

Item 4 – Mine Safety Disclosures

None.

Item 5 – Other Information

None.

25

Item 6 – Exhibits

The following documents are filed as exhibits to this Report:

Exhibit Number	Description of Document
4.1	Registration Rights Agreement, dated August 20, 2014, between Liquidmetal Technologies, Inc. and Aspire Capital Fund, LLC (incorporated by reference from Exhibit 4.1 to the Form 8-K filed on August 25, 2014).
10.1	Common Stock Purchase Agreement, dated August 20, 2014, between Liquidmetal Technologies, Inc. and Aspire Capital Fund, LLC (incorporated by reference from Exhibit 10.1 to the Form 8-K filed on August 25, 2014).
31.1	Certification of Principal Executive Officer, Thomas Steipp, as required by Section 302 of the Sarbanes-Oxley Act of 2002.
31.2	Certification of Principal Financial Officer, Tony Chung, as required by Section 302 of the Sarbanes-Oxley Act of 2002.
32.1	Certification of Chief Executive Officer, Thomas Steipp, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
32.2	Certification of Chief Financial Officer, Tony Chung, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
101.1	The following financial statements from Liquidmetal Technologies, Inc.’s Quarterly Report on Form 10-Q for the quarter ended September 30, 2014 (unaudited), formatted in XBRL: (i) Consolidated Balance Sheets as of September 30, 2014 and December 31, 2013, (ii) Consolidated Statements of Operations and Comprehensive Loss for the three and nine months ended September 30, 2014 and 2013, (iii) Consolidated Statement of Stockholders’ Equity (Deficit) for the nine months ended September 30, 2014, (iv) Consolidated Statements of Cash Flows for the nine months ended September 30, 2014 and 2013, and (v) Notes to Consolidated Financial Statements.

26

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

	LIQUIDMETAL TECHNOLOGIES, INC.
	(Registrant)
Date: November 12, 2014	/s/ Thomas Steipp
	Thomas Steipp
	President and Chief Executive Officer
	(Principal Executive Officer)
Date: November 12, 2014	/s/ Tony Chung
	Tony Chung
	Chief Financial Officer
	(Principal Financial and Accounting Officer)

EX-31

Exhibit 31.1

certificationS

I, Thomas Steipp, certify that:

1. I have reviewed this quarterly report on Form 10-Q of Liquidmetal Technologies, Inc.;

2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

4. The registrant's other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

a)     Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

b)     Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

c)     Evaluated the effectiveness of the registrant's disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

d)     Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

5. The registrant's other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant's auditors and the audit committee of the registrant's board of directors (or persons performing the equivalent functions):

a)     All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant's ability to record, process, summarize and report financial information; and

b)     Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant's internal control over financial reporting.

Date: November 12, 2014     /s/ Thomas Steipp                    

Thomas Steipp

President and Chief Executive Officer

(Principal Executive Officer)

EX-31

Exhibit 31.2

CERTIFICATIONS

I, Tony Chung, certify that:

1. I have reviewed this quarterly report on Form 10-Q of Liquidmetal Technologies, Inc.;

2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

4. The registrant's other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

a) Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

b) Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

c) Evaluated the effectiveness of the registrant's disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

d) Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

5. The registrant's other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant's auditors and the audit committee of the registrant's board of directors (or persons performing the equivalent functions):

a) All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant's ability to record, process, summarize and report financial information; and

b) Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant's internal control over financial reporting.

Date: November 12, 2014          /s/ Tony Chung                    

Tony Chung

Chief Financial Officer

(Principal Financial and Accounting Officer)

EX-32

Exhibit 32.1

WRITTEN STATEMENT OF THE CHIEF EXECUTIVE OFFICER

PURSUANT TO 18 U.S.C. 1350

Solely for the purposes of complying with 18 U.S.C. 1350, I, the undersigned Chief Executive Officer of Liquidmetal Technologies, Inc. (the “Company”), hereby certify, based on my knowledge, that the Quarterly Report on Form 10-Q of the Company for the quarter ended September 30, 2014 (the “Report”) fully complies with the requirements of Section 13(a) of the Securities Exchange Act of 1934 and that the information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.

/s/ Thomas Steipp               

Thomas Steipp, President and Chief Executive Officer

November 12, 2014

EX-32

Exhibit 32.2 

WRITTEN STATEMENT OF THE CHIEF FINANCIAL OFFICER

PURSUANT TO 18 U.S.C. 1350

Solely for the purposes of complying with 18 U.S.C. 1350, I, the undersigned Chief Financial Officer of Liquidmetal Technologies, Inc. (the “Company”), hereby certify, based on my knowledge, that the Quarterly Report on Form 10-Q of the Company for the quarter ended September 30, 2014 (the “Report”) fully complies with the requirements of Section 13(a) of the Securities Exchange Act of 1934 and that the information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.

/s/ Tony Chung                         

Tony Chung, Chief Financial Officer

November 12, 2014

XML

Note 13 - Commitments and Contingencies (Details) (USD $) In Thousands, unless otherwise specified	3 Months Ended		9 Months Ended
	Sep. 30, 2014	Sep. 30, 2013	Sep. 30, 2014	Sep. 30, 2013
Commitments and Contingencies Disclosure [Abstract]
Operating Leases, Rent Expense, Net	$ 50	$ 50	$ 150	$ 150

XML

Note 8 - Warrant Liability (Details) (USD $) In Thousands, except Share data, unless otherwise specified	3 Months Ended		9 Months Ended				0 Months Ended	9 Months Ended			9 Months Ended
	Sep. 30, 2014	Sep. 30, 2013	Sep. 30, 2014	Sep. 30, 2013	Dec. 31, 2013	Oct. 31, 2009	Jul. 08, 2014 Private Placement [Member]	Sep. 30, 2014 Private Placement [Member]	Dec. 31, 2013 Private Placement [Member]	Jul. 02, 2012 Private Placement [Member]	Sep. 30, 2014 Visser MTA Agreement [Member]	Dec. 31, 2013 Visser MTA Agreement [Member]	Jun. 30, 2012 Visser MTA Agreement [Member]	Sep. 30, 2014 Warrants Valued As Liability [Member]	Dec. 31, 2013 Warrants Valued As Liability [Member]
Note 8 - Warrant Liability (Details) [Line Items]
Class of Warrant or Right, Number of Securities Called by Warrants or Rights	29,779,557		29,779,557		29,779,557	4,500,000				18,750,000	18,706,235	18,562,825	15,000,000
Class of Warrant or Right, Exercise Price of Warrants or Rights (in Dollars per share)						$ 0.50		$ 0.19		$ 0.384	$ 0.18	$ 0.18	$ 0.22
Derivative Liability, Noncurrent (in Dollars)	$ 4,981		$ 4,981		$ 4,921			$ 2,389	$ 2,362	$ 5,053	$ 2,592		$ 4,260
Fair Value Assumptions, Expected Term								2 years 9 months			2 years 244 days
Fair Value Assumptions, Expected Volatility Rate								117.00%			119.00%
Fair Value Assumptions, Risk Free Interest Rate								1.07%			1.07%
Fair Value Assumptions, Expected Dividend Rate								0.00%			0.00%
Fair Value Adjustment of Warrants (in Dollars)	(1,595)	2,511	276	1,715				243			33
							1,178,000
Investment Warrants, Exercise Price (in Dollars per share)							$ 0.19
Proceeds from Warrant Exercises (in Dollars)			226				226
Adjustments to Additional Paid in Capital, Equity Component of Convertible Debt (in Dollars)			$ 216				$ 216	$ 216
Class of Warrant or Right, Outstanding	66,057,792		66,057,792		67,092,382									36,278,235	36,278,235

XML

Note 1 - Description of Business (Details)	9 Months Ended
	Sep. 30, 2014
Disclosure Text Block [Abstract]
Percentages of Stronger than Zirconium Titanium Liquidmetal Alloys	250.00%

XML

Note 11 - Shareholders' Equity (Deficit) (Details) (USD $) In Thousands, except Share data, unless otherwise specified	1 Months Ended	9 Months Ended	12 Months Ended						12 Months Ended			0 Months Ended	1 Months Ended			0 Months Ended				13 Months Ended		1 Months Ended	13 Months Ended				0 Months Ended	9 Months Ended	1 Months Ended	9 Months Ended	12 Months Ended		9 Months Ended
	Jul. 17, 2013	Sep. 30, 2014	Dec. 31, 2013	Oct. 24, 2013	Feb. 28, 2013	Feb. 27, 2013	Oct. 31, 2009	May 02, 2009 Series A Preferred Stock [Member] Reduced for Anti-dilution Impact [Member]	Dec. 31, 2013 Series A Preferred Stock [Member]	Dec. 31, 2012 Series A Preferred Stock [Member]	May 02, 2009 Series A Preferred Stock [Member]	May 01, 2009 Convertible Series A1 Preferred Stock [Member]	Oct. 31, 2009 Convertible Series A1 Preferred Stock [Member]	Dec. 31, 2012 Convertible Series A1 Preferred Stock [Member]	May 02, 2009 Convertible Series A1 Preferred Stock [Member]	May 01, 2009 Convertible Series A2 Preferred Stock [Member]	Dec. 31, 2012 Convertible Series A2 Preferred Stock [Member]	Oct. 31, 2009 Convertible Series A2 Preferred Stock [Member]	May 02, 2009 Convertible Series A2 Preferred Stock [Member]	Jul. 31, 2013 Private Placement [Member] Senior Convertible Notes [Member]	Jul. 31, 2013 Private Placement [Member] Weighted Average [Member]	Jun. 30, 2012 Private Placement [Member] Visser MTA Agreement [Member]	Jul. 31, 2013 Private Placement [Member]	Sep. 30, 2014 Private Placement [Member]	Jul. 02, 2012 Private Placement [Member]	Sep. 30, 2014 Common Stock Purchase Agreement [Member] Weighted Average [Member]	Nov. 08, 2013 Common Stock Purchase Agreement [Member]	Sep. 30, 2014 Common Stock Purchase Agreement [Member]	Feb. 27, 2013 Common Stock [Member]	Sep. 30, 2014 Common Stock [Member]	Dec. 31, 2013 Common Stock [Member]	Dec. 31, 2012 Common Stock [Member]	Sep. 30, 2014 Employee Stock Option [Member]	Oct. 31, 2009 Reduced for Anti-dilution Impact [Member]	Sep. 30, 2014 Minimum [Member]	Sep. 30, 2014 Maximum [Member]	Sep. 30, 2014 Liquidmetal Golf [Member]
Note 11 - Shareholders' Equity (Deficit) (Details) [Line Items]
Stock Issued During Period, Shares, New Issues												500,000										30,000,000						85,355,615		85,355,615
Debt Conversion, Converted Instrument, Shares Issued	18,679,584																						163,641,547
Debt Instrument, Convertible, Conversion Price (in Dollars per share)																					$ 0.0774
Debt Instrument, Periodic Payment, Principal (in Dollars)																				$ 12,000
Debt Instrument, Periodic Payment, Interest (in Dollars)																				680
Conversion of Stock, Shares Converted									506,936	792,215
Conversion of Stock, Shares Issued																													4,626,840		16,896,070
Common Stock, Shares Authorized		700,000,000	700,000,000	700,000,000	500,000,000	400,000,000
Stock Issued During Period, Shares, Other													180,000			2,625,000											2,666,667
Stock Issued During Period, Value, New Issues (in Dollars)		16,000																										16,000		85
Share Price (in Dollars per share)															$ 5.00				$ 5.00							$ 0.19
Share-based Compensation Arrangement by Share-based Payment Award, Options, Exercises in Period																														2,242,014			2,242,014
Stock Issued During Period, Value, Stock Options Exercised (in Dollars)		205																												2			205
Share-based Compensation Arrangements by Share-based Payment Award, Options, Exercises in Period, Weighted Average Exercise Price (in Dollars per share)																																	$ 0.09
Class of Warrant or Right, Number of Securities Called by Warrants or Rights		29,779,557	29,779,557				4,500,000				42,329,407														18,750,000
Class of Warrant or Right, Exercise Price of Warrants or Rights (in Dollars per share)							$ 0.50				$ 0.50													$ 0.19	$ 0.384										$ 0.48	$ 0.49
Class of Warrant or Right, Adjusted Exercise Price of Warrants or Rights (in Dollars per Item)								0.49																										0.49
Convertible Preferred Stock, Conversion Price (in Dollars per share)													$ 0.10					$ 0.22
Convertible Preferred Stock, Shares Issued upon Conversion			16,896,070																													25,669,752
Preferred Stock, Shares Outstanding		0	0							506,936				105,231			401,705
Dividends Payable (in Dollars)										222
Adjustments to Additional Paid in Capital, Reclassification of Accrued Preferred Stock Dividends (in Dollars)			222
Warrants and Rights Outstanding (in Dollars)		18,179	18,179																						5,053
Noncontrolling Interest, Ownership Percentage by Parent																																					79.00%
Stockholders' Equity Attributable to Noncontrolling Interest (in Dollars)		$ (52)	$ (42)

XML

Note 3 - Significant Transactions

9 Months Ended

Sep. 30, 2014

Significant Transactions [Abstract]

Significant Transactions [Text Block]

3. Significant Transactions

2014 Stock Purchase Agreement

On August 20, 2014, the Company entered into a common stock purchase agreement (“2014 Purchase Agreement”) with Aspire Capital Fund LLC (“Aspire Capital”), which provides that, upon the terms and subject to the conditions and limitations set forth therein, Aspire Capital is committed to purchase up to an aggregate of $30,000 worth of the Company’s common stock, $0.001 par value, over the 36 month term of the 2014 Purchase Agreement.

From time to time over the term of the 2014 Purchase Agreement, the Company may, at its sole discretion, provide Aspire Capital with a regular purchase notice (each a “Regular Purchase Notice”) directing Aspire Capital to purchase up to 1,000,000 shares, but not to exceed $400, of the Company’s common stock per trading day at a price per share equal to the lesser of (i) the lowest sale price of the Company’s common stock on the purchase date; or (ii) the arithmetic average of the three lowest closing sale prices for the Company’s common stock during the twelve consecutive trading days ending on the trading day immediately preceding the purchase date.

In addition, on any date on which the Company submits a Regular Purchase Notice to Aspire Capital for the purchase of at least 500,000 shares at a price above $0.30, the Company also has the right, in its sole discretion, to present Aspire Capital with a volume-weighted average price purchase notice (each, a “VWAP Purchase Notice”) directing Aspire Capital to purchase an amount of stock equal to up to 30% of the aggregate shares of the Company’s common stock traded on its principal market on the next trading day (the “VWAP Purchase Date”), subject to a maximum number of shares the Company may determine. The purchase price per share pursuant to such VWAP Purchase Notice is generally 95% of the volume-weighted average price for the Company’s common stock traded on its principal market on the VWAP Purchase Date.

The Company may deliver multiple Regular Purchase Notices and VWAP Purchase Notices to Aspire Capital from time to time during the term of the 2014 Purchase Agreement, so long as the most recent purchase has been completed. The 2014 Purchase Agreement provides that the Company and Aspire Capital shall not effect any sales under the 2014 Purchase Agreement on any purchase date where the closing sale price of the Company’s common stock is less than $0.10 per share. There are no trading volume requirements or restrictions under the 2014 Purchase Agreement, and the Company will control the timing and amount of sales of the Company’s common stock to Aspire Capital.

On September 9, 2014, an initial registration statement covering 75,000,000 shares issued and issuable pursuant to the 2014 Purchase Agreement was declared effective by the SEC. To date, there have been no transactions under this agreement.

2013 Stock Purchase Agreement

On November 8, 2013, the Company entered into a Common Stock Purchase Agreement (the “2013 Purchase Agreement”) with Kingsbrook Opportunities Master Fund LP, Tech Opportunities LLC, and Iroquois Master Fund Ltd. (each, a “2013 Investor” and collectively, the “2013 Investors”). The 2013 Purchase Agreement provided that, upon the terms and subject to the conditions set forth therein, each of the 2013 Investors had committed to purchase such 2013 Investor’s pro rata portion of up to $20,000 (the “Total Commitment”) worth of the Company’s common stock, $0.001 par value (the “Shares”), over the 36-month term of the 2013 Purchase Agreement. In consideration for the execution and delivery of the 2013 Purchase Agreement, on November 8, 2013, the Company issued 2,666,667 shares of common stock (“the Commitment Shares”) to the 2013 Investors.

From time to time over the term of the 2013 Purchase Agreement, the Company was able to, at its sole discretion, provide each of the 2013 Investors with draw down notices (each a “Draw Down Notice”) to purchase a specified dollar amount of Shares (the “Draw Down Amount”) over a five (5) consecutive trading day period commencing on the trading day specified in the applicable Draw Down Notice (the “Pricing Period”) with each draw down subject to the limitations discussed below. The maximum amount of Shares requested to be purchased pursuant to any single Draw Down Notice could not exceed a dollar amount equal to the lesser of (i) 300% of the average trading volume of the Company’s common stock during the ten (10) trading days immediately preceding the date the applicable Draw Down Notice was delivered (the “Applicable Draw Down Exercise Date”) multiplied by the lower of (A) the closing trade price of the Company’s common stock on the trading day immediately preceding the Applicable Draw Down Exercise Date and (B) the average of the closing trade prices of our common stock for the three (3) trading days immediately preceding the Applicable Draw Down Exercise Date (such lower price, the “Reference Price”), and (ii) a specified dollar amount set forth in the 2013 Purchase Agreement based on the Reference Price as of the Applicable Draw Down Exercise Date.

Once presented with a Draw Down Notice, each of the 2013 Investors was required to purchase such 2013 Investor’s pro rata portion of the applicable Draw Down Amount on each trading day during the applicable Pricing Period on which the daily volume weighted average price for the Company’s common stock (the “VWAP”) equaled or exceeded an applicable floor price equal to the product of (i) 0.775 and (ii) the Reference Price, subject to adjustment (the “Floor Price”), provided that in no event could the Floor Price be less than $0.03875. If the VWAP fell below the applicable Floor Price on any trading day during the applicable Pricing Period, the 2013 Purchase Agreement provided that the 2013 Investors would not be required to purchase their pro rata portions of the applicable Draw Down Amount allocated to that trading day. The per share purchase price for the Shares subject to a Draw Down Notice was equal to 90% of the lowest daily VWAP that equaled or exceeded the applicable Floor Price during the applicable Pricing Period. Each purchase pursuant to a draw down reduced, on a dollar-for-dollar basis, the Total Commitment under the 2013 Purchase Agreement.

The Company was prohibited from issuing a Draw Down Notice if (i) the amount requested in such Draw Down Notice exceeded the Maximum Draw Down Amount, (ii) the sale of Shares pursuant to such Draw Down Notice caused the Company to issue or sell or the 2013 Investors to acquire or purchase an aggregate dollar value of Shares that exceeded the Total Commitment, (iii) the sale of Shares pursuant to the Draw Down Notice caused the Company to sell or the 2013 Investors to purchase an aggregate number of shares of the Company’s common stock which resulted in the collective beneficial ownership by the 2013 Investors of more than 9.99% of the Company’s common stock (as calculated pursuant to Section 13(d) of the Securities Exchange Act of 1934, as amended, and the rules and regulations thereunder), or (iv) the applicable Floor Price was less than $0.03875 on the Applicable Draw Down Exercise Date. The Company could not make more than one draw down in any Pricing Period and must have allowed two (2) trading days to elapse between the completion of the settlement of any one draw down and the commencement of a Pricing Period for any other draw down.

On February 11, 2014, an initial registration statement covering 96,555,893 shares issued and issuable pursuant to the 2013 Purchase Agreement was declared effective by the SEC.

As of September 30, 2014, the Company had received an aggregate of $16,000 under the 2013 Purchase Agreement through the issuance of 85,355,615 shares of its common stock at a weighted average price of $0.19 per share. On August 22, 2014, the Company voluntarily terminated the 2013 Purchase Agreement, effective August 25, 2014.

July 2012 Private Placement

On July 2, 2012, the Company entered into a private placement transaction (the “July 2012 Private Placement”) pursuant to which the Company issued $12,000 in principal amount of senior convertible notes that were due on September 1, 2013. The notes were convertible into shares of the Company’s common stock at a conversion price of $0.352 per share. The notes bore interest at 8% per annum and were payable in twelve equal monthly installments of principal and interest beginning on October 1, 2012. Each monthly installment payment was payable in cash, shares of the Company’s common stock, or a combination thereof. If paid in shares, such shares were valued at the lower of (i) the then applicable conversion price or (ii) a price that was 87.5% of the arithmetic average of the ten (or in some cases fewer) lowest weighted average prices of the Company’s common stock during the twenty trading day period ending two trading days before the payment date or the date on which the Company elected to pay in shares, whichever was lower. As of July 17, 2013, the Company had issued 163,641,547 shares of common stock in full satisfaction of the notes (see note 7).

As a part of the July 2012 Private Placement, the Company issued warrants to purchase 18,750,000 shares of the Company’s common stock at an exercise price of $0.384 per share (reduced to $0.19 per share under the anti-dilution and price reset provisions of the warrants, see note 8), and such warrants first became exercisable on January 2, 2013 which was six months after the issuance date thereof. In the event that the Company issues or sells shares of the Company’s common stock at a price per share that is less than the exercise price then in effect, the exercise price of the warrants will be reduced based on a weighted-average formula. In addition, on the two year anniversary of the issuance date, the then applicable exercise price was reset to equal 87.5% of the arithmetic average of the ten lowest weighted average prices of the common stock during the twenty trading day period ending two trading days immediately preceding the reset date. All of the warrants will expire on July 2, 2017 (see note 8).

June 2012 Visser MTA Agreement

On June 1, 2012, the Company entered into a Master Transaction Agreement (the “Visser MTA Agreement”) with Visser Precision Cast, LLC (“Visser”) relating to a strategic transaction for manufacturing services and financing.

Under the manufacturing and service component of the Visser MTA Agreement, the Company had agreed to engage Visser as a perpetual, exclusive manufacturer of non-consumer electronic products and to not, directly or indirectly, conduct manufacturing operations, subcontract for the manufacture of products or components or grant a license to any other party to conduct manufacturing operations, except for certain limited exceptions. Under the financing component of the Visser MTA Agreement, the Company issued and sold to Visser in a private placement transaction (i) 30,000,000 shares of common stock at a purchase price of $0.10 per share resulting in proceeds of $3,000, (ii) warrants to purchase 15,000,000 shares of common stock at an original exercise price of $0.22 per share which were to expire on June 1, 2017 and (iii) a secured convertible promissory note in the aggregate principal amount of up to $2,000. No borrowings were made by the Company under the promissory note, and the deadline for making borrowings under the facility expired on November 15, 2012.

In November 2013, the Company and Visser entered into arbitration proceedings to resolve disputes associated with the Visser MTA Agreement.

On May 20, 2014, the Company and Visser entered into a settlement under which they agreed to terminate the existing arbitration proceedings, release each other from all claims they may have had against each other and substantially change the business relationship that had been reflected in the original Visser MTA Agreement. As part of the settlement, the parties have amended and restated the sublicense and financing components of the Visser MTA Agreement. Additionally, the manufacturing services component and remaining considerations of the Visser MTA Agreement were terminated.

Under the amended and restated sublicense agreement, the Company has granted to Visser a fully paid-up, royalty-free, irrevocable, perpetual, worldwide, non-transferable, nonexclusive sublicense to all of the Company’s intellectual property developed on or prior to May 20, 2014 (the “Effective Date”), for all fields of use other than certain excluded fields as set forth therein. Visser does not have any rights, now or in the future, to intellectual property of the Company developed after the Effective Date of the agreement. The license to the Company’s intellectual property developed on or prior to the Effective Date does not include the right to use the “Liquidmetal” trademark or any of the Company’s other trademarks, except in certain defined situations, as set forth in the amended and restated agreement.

With the foregoing revised arrangements, the Company is no longer required to use Visser as its exclusive manufacturer and is free to license other manufacturers on a non-exclusive basis in any industry or geographic market as to which the Company has not previously granted an exclusive license to a third party. Any such manufacturers licensed by the Company in the future will be able both to manufacture parts for the Company and the Company’s customers, and manufacture and sell products for their own account for such industries or markets as the Company may agree, subject to whatever royalty arrangements the Company may negotiate. The Company has not yet licensed any manufacturers other than Visser. Visser will also have the right to manufacture and sell products under the amended and restated sublicense agreement.

The settlement amends and restates two warrants the Company issued to Visser in June 2012 to purchase 15,000,000 shares of the Company’s common stock at an exercise price of $0.22 per share. Those warrants contained anti-dilution mechanisms under which the number of shares issuable upon exercise of those warrants would be increased, and the exercise price for such shares would be reduced if the Company issued shares of its common stock at prices less than the warrants’ exercise price. The amended and restated warrant agreement includes the effect of such anti-dilution adjustments and is exercisable for 18,611,079 shares of common stock (increased further to 18,706,235 shares under the anti-dilution provisions of the warrants, see note 8) at an exercise price of $0.18 per share. The amended and restated warrant agreement continues to contain comparable anti-dilution adjustment mechanisms. The amended and restated warrant agreement also removes certain lock-up provisions that were included in the original warrants.

Apple License Transaction

On August 5, 2010, the Company entered into a license transaction with Apple Inc. (“Apple”) pursuant to which (i) the Company contributed substantially all of its intellectual property assets to a newly organized special-purpose, wholly-owned subsidiary, called Crucible Intellectual Property, LLC (“CIP”), (ii) CIP granted to Apple a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in the field of consumer electronic products, as defined in the license agreement, in exchange for a license fee, and (iii) CIP granted back to the Company a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in all other fields of use. Additionally, in connection with the license transaction, Apple required the Company to complete a statement of work related to the exchange of Liquidmetal intellectual property information. The Company recognized a portion of the one-time license fee upon receipt of the initial payment and completion of the foregoing requirements under the license transaction. The remaining portion of the one-time license fee was recognized at the completion of the required statement of work.

Under the agreements relating to the license transaction with Apple, the Company was obligated to contribute, to CIP, all intellectual property that it developed through February 2012. Subsequently, this obligation has been extended to apply to all intellectual property developed through February 2015. The Company is also obligated to maintain certain limited liability company formalities with respect to CIP at all times after the closing of the license transaction.

Other License Transactions

On January 31, 2012, the Company entered into a Supply and License Agreement for a five year term with Engel Austria Gmbh (“Engel”) whereby Engel was granted a non-exclusive license to manufacture and sell injection molding machines to the Company’s licensees. Since that time, the Company and Engel have agreed on an injection molding machine configuration that can be commercially supplied and supported by Engel.  On December 6, 2013, the companies entered into an Exclusive License Agreement for a 10 year term whereby Engel was granted an exclusive license to manufacture and sell injection molding machines to the Company’s licensees in exchange for certain royalties to be paid by Engel to the Company based on a percentage of the net sales price of such injection molding machines.

The Company’s Liquidmetal Golf subsidiary has the exclusive right and license to utilize the Company’s Liquidmetal alloy technology for purposes of golf equipment applications. This right and license is set forth in an intercompany license agreement between Liquidmetal Technologies and Liquidmetal Golf. This license agreement provides that Liquidmetal Golf has a perpetual and exclusive license to use Liquidmetal alloy technology for the purpose of manufacturing, marketing, and selling golf club components and other products used in the sport of golf. The Company owns 79% of the outstanding common stock of Liquidmetal Golf.

In June 2003, the Company entered into an exclusive license agreement with LLPG, Inc. (“LLPG”).  Under the terms of the agreement, LLPG has the right to commercialize Liquidmetal alloys, particularly precious-metal based compositions, in jewelry and high-end luxury product markets.  The Company, in turn, will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by LLPG. The exclusive license agreement with LLPG expires on December 31, 2021.

In March 2009, the Company entered into a license agreement with Swatch Group, Ltd. (“Swatch”) under which Swatch was granted a perpetual non-exclusive license to the Company’s technology to produce and market watches and certain other luxury products. In March 2011, this license agreement was amended to grant Swatch exclusive rights as to watches, and the Company’s license agreement with LLPG was simultaneously amended to exclude watches from LLPG’s rights. The Company will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by Swatch. The license agreement with Swatch will expire on the expiration date of the last licensed patent.

XML

Note 4 - Liquidity and Capital Resources (Details) (USD $) In Thousands, except Share data, unless otherwise specified	9 Months Ended					1 Months Ended	0 Months Ended	9 Months Ended
	Sep. 30, 2014	Sep. 30, 2013	Dec. 31, 2013	Dec. 31, 2012	Sep. 30, 2014 Common Stock Purchase Agreement [Member] Weighted Average [Member]	Aug. 20, 2014 Common Stock Purchase Agreement [Member]	Nov. 08, 2013 Common Stock Purchase Agreement [Member]	Sep. 30, 2014 Common Stock Purchase Agreement [Member]
Note 4 - Liquidity and Capital Resources (Details) [Line Items]
Net Cash Provided by (Used in) Operating Activities	$ (5,630)	$ (4,028)
Net Cash Provided by (Used in) Investing Activities	(961)	(185)
Net Cash Provided by (Used in) Financing Activities	16,431	74
Cash and Cash Equivalents, at Carrying Value	11,902	3,023	2,062	7,162
Common Stock Purchase Agreement, Value of Shares Authorized to Issue and Sell to Investors						30,000	20,000
Common Stock Subscriptions Term						3 years	36 months
Stock Issued During Period, Value, New Issues	$ 16,000							$ 16,000
Stock Issued During Period, Shares, New Issues (in Shares)								85,355,615
Share Price (in Dollars per share)					$ 0.19

XML

Note 3 - Significant Transactions (Details) (USD $) In Thousands, except Share data, unless otherwise specified	9 Months Ended					1 Months Ended						1 Months Ended				1 Months Ended	0 Months Ended	9 Months Ended			1 Months Ended	0 Months Ended
	Sep. 30, 2014	Dec. 31, 2013	Oct. 31, 2009	Jun. 30, 2012 Visser MTA Agreement [Member] Private Placement [Member] Convertible Notes Payable [Member]	Sep. 30, 2014 Visser MTA Agreement [Member] Private Placement [Member] Additional Warrants for Anti-dilution Impact [Member]	Jun. 30, 2012 Visser MTA Agreement [Member] Private Placement [Member]	Sep. 30, 2014 Visser MTA Agreement [Member] Private Placement [Member]	Aug. 20, 2014 The 2014 Purchase Agreement [Member] Regular Purchase Notice [Member] Maximum [Member]	Aug. 20, 2014 The 2014 Purchase Agreement [Member] Regular Purchase Notice [Member]	Aug. 20, 2014 The 2014 Purchase Agreement [Member] Regular Purchase Notice with Minimum Purchase Price Per Share [Member]	Aug. 20, 2014 The 2014 Purchase Agreement [Member] Minimum [Member]	Aug. 20, 2014 The 2014 Purchase Agreement [Member]	Sep. 09, 2014 The 2014 Purchase Agreement [Member]	Nov. 08, 2013 Common Stock Purchase Agreement [Member] After Sale of Shares Pursuant to Draw Down Notice [Member]	Sep. 30, 2014 Common Stock Purchase Agreement [Member] Weighted Average [Member]	Aug. 20, 2014 Common Stock Purchase Agreement [Member]	Nov. 08, 2013 Common Stock Purchase Agreement [Member]	Sep. 30, 2014 Common Stock Purchase Agreement [Member]	Feb. 11, 2014 Common Stock Purchase Agreement [Member]	Jul. 31, 2012 Private Placement [Member] Warrants Part of Additional Paid in Capital [Member] Convertible Notes Payable [Member] Amended Agreement [Member]	Jul. 31, 2012 Private Placement [Member] Warrants Part of Additional Paid in Capital [Member] Convertible Notes Payable [Member]	Jul. 02, 2012 Private Placement [Member] Convertible Notes Payable [Member]	Jul. 31, 2013 Private Placement [Member] Weighted Average [Member]	Sep. 30, 2014 Private Placement [Member]	Jul. 17, 2013 Private Placement [Member]	Jul. 02, 2012 Private Placement [Member]	Jul. 31, 2013 Convertible Notes Payable [Member]	Sep. 30, 2014 Maximum [Member]	Sep. 30, 2014 Minimum [Member]	Sep. 30, 2014 Liquidmetal Golf [Member]
Note 3 - Significant Transactions (Details) [Line Items]
Common Stock Purchase Agreement, Value of Shares Authorized to Issue and Sell to Investors (in Dollars)								$ 400				$ 30,000				$ 30,000	$ 20,000
Common Stock, Par or Stated Value Per Share (in Dollars per share)	$ 0.001	$ 0.001										$ 0.001					$ 0.001
Common Stock Subscriptions Term												36 months				3 years	36 months
Common Stock, Capital Shares Reserved for Future Issuance									1,000,000	500,000
Share Price (in Dollars per share)										$ 0.30	$ 0.10				$ 0.19
Common Stock Shares Covered by Registration Statement													75,000,000						96,555,893
Stock Issued During Period, Shares, Other																	2,666,667
Subscription Multiplier for Price Floor																	0.775
Subscription Floor Price (in Dollars per share)																	$ 0.03875
Noncontrolling Interest, Ownership Percentage by Noncontrolling Owners														9.99%
Stock Issued During Period, Value, New Issues (in Dollars)	16,000																	16,000
Stock Issued During Period, Shares, New Issues						30,000,000												85,355,615
Debt Instrument, Face Amount (in Dollars)				2,000																		12,000
Debt Instrument, Convertible, Conversion Price (in Dollars per share)																						$ 0.352	$ 0.0774				$ 0.0774
Debt Instrument, Interest Rate, Stated Percentage																						8.00%
Senior Convertible Notes Arithmetic Average, Percentage																					87.50%	87.50%
Trading Days																					20 days	20 days
Trading Day Preceding Reset, Date																					2 days	2 days
Common Stock, Shares, Issued	464,482,819	375,707,190																							163,641,547
Class of Warrant or Right, Number of Securities Called by Warrants or Rights	29,779,557	29,779,557	4,500,000		18,706,235	15,000,000	18,611,079														18,750,000					18,750,000
Class of Warrant or Right, Exercise Price of Warrants or Rights (in Dollars per share)			$ 0.50			$ 0.22														$ 0.19	$ 0.384			$ 0.19		$ 0.384		$ 0.49	$ 0.48
Sale of Stock, Price Per Share (in Dollars per share)						$ 0.10
Proceeds from Issuance of Common Stock (in Dollars)	$ 16,000					$ 3,000
Class of Warrant or Right, Adjusted Exercise Price of Warrants or Rights (in Dollars per Share)							0.18
Noncontrolling Interest, Ownership Percentage by Parent																														79.00%

XML

Note 5 - Prepaid Expenses and Other Current Assets (Details) (USD $) In Thousands, unless otherwise specified	Sep. 30, 2014	Dec. 31, 2013
Prepaid Expenses And Other Current Assets [Abstract]
Prepaid Expense and Other Assets, Current	$ 421	$ 412

XML

Note 6 - Patents and Trademarks, net (Details) (USD $) In Thousands, unless otherwise specified	9 Months Ended
	Sep. 30, 2014	Sep. 30, 2013	Dec. 31, 2013
Note 6 - Patents and Trademarks, net (Details) [Line Items]
Intangible Assets, Net (Excluding Goodwill)	$ 695		$ 764
Amortization of Intangible Assets	$ 78	$ 90
Patents [Member] | Minimum [Member]
Note 6 - Patents and Trademarks, net (Details) [Line Items]
Finite-Lived Intangible Asset, Useful Life	10 years
Patents [Member] | Maximum [Member]
Note 6 - Patents and Trademarks, net (Details) [Line Items]
Finite-Lived Intangible Asset, Useful Life	17 years
Trademarks [Member] | Minimum [Member]
Note 6 - Patents and Trademarks, net (Details) [Line Items]
Finite-Lived Intangible Asset, Useful Life	10 years
Trademarks [Member] | Maximum [Member]
Note 6 - Patents and Trademarks, net (Details) [Line Items]
Finite-Lived Intangible Asset, Useful Life	17 years

XML

Note 2 - Basis of Presentation and Recent Accounting Pronoucements

9 Months Ended

Sep. 30, 2014

Disclosure Text Block [Abstract]

Basis of Presentation and Significant Accounting Policies [Text Block]

2. Basis of Presentation and Recent Accounting Pronouncements

The accompanying unaudited interim consolidated financial statements as of and for the nine months ended September 30, 2014 have been prepared in accordance with accounting principles generally accepted in the United States of America (“generally accepted accounting principles”) for interim financial information and with the instructions to Form 10-Q. Accordingly, they do not include all of the information and notes required by generally accepted accounting principles for complete financial statements. In the opinion of management, all adjustments (consisting only of normal recurring accruals) considered necessary for a fair presentation have been included. All intercompany balances and transactions have been eliminated in consolidation. Operating results for the three and nine month periods ended September 30, 2014 are not necessarily indicative of the results that may be expected for any future periods or the year ending December 31, 2014. The accompanying unaudited consolidated financial statements should be read in conjunction with the Company's 2013 Annual Report on Form 10-K filed with the Securities and Exchange Commission on March 5, 2014.

Revenue Recognition

Revenue is recognized pursuant to applicable accounting standards including FASB ASC Topic 605 (“ASC 605”), Revenue Recognition. ASC 605 summarizes certain points of the SEC staff’s views in applying generally accepted accounting principles to revenue recognition in financial statements and provides guidance on revenue recognition issues in the absence of authoritative literature addressing a specific arrangement or a specific industry.

The Company’s revenue recognition policy complies with the requirements of ASC 605. Revenue is recognized when (i) persuasive evidence of an arrangement exists, (ii) delivery has occurred, (iii) the sales price is fixed or determinable, (iv) collection is probable and (v) all obligations have been substantially performed pursuant to the terms of the arrangement. Revenues are derived primarily from the sales and prototyping of Liquidmetal mold and bulk alloys as well as licensing and royalties for the use of the Liquidmetal brand and bulk Liquidmetal alloys. Revenue is deferred and included in liabilities when the Company receives cash in advance for goods not yet delivered or if the licensing term has not begun.

License revenue arrangements in general provide for the grant of certain intellectual property rights for patented technologies owned or controlled by the Company. These rights typically include the grant of an exclusive or non-exclusive right to manufacture and/or sell products covered by patented technologies owned or controlled by the Company. The intellectual property rights granted may be perpetual in nature, extending until the expiration of the related patents, or can be granted for a defined period of time.

Licensing revenues that are one time fees upon the granting of the license are recognized when (i) the license term begins in a manner consistent with the nature of the transaction and the earnings process, (ii) collectability is reasonably assured or upon receipt of an upfront fee, and (iii) all other revenue recognition criteria have been met. Pursuant to the terms of these types of licensing agreements, the Company has no further obligation with respect to the grant of the license once the license is granted. Licensing revenues that are related to royalties are recognized as the royalties are earned over the related period.

Fair Value Measurements

The estimated fair values of amounts reported in the consolidated financial statements have been determined using available market information and valuation methodologies, as applicable. The fair value of cash, trade receivables, prepaid expenses and other current assets, accounts payable, and accrued liabilities approximate their carrying value due to their short maturities. The fair value of non-current assets and liabilities approximate their carrying value unless otherwise stated.

Fair value is defined as the exchange price that would be received for an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date. Entities are required to maximize the use of observable inputs and minimize the use of unobservable inputs when measuring fair value based upon the following fair value hierarchy:

Level 1 — Quoted prices in active markets for identical assets or liabilities;

Level 2 — Observable inputs other than Level 1 prices, such as quoted prices for similar assets or liabilities; quoted prices in markets that are not active; or other inputs that are observable or can be corroborated by observable market data for substantially the full term of the assets or liabilities; and

Level 3 — Unobservable inputs that are supported by little or no market activity and that are significant to the fair value of the assets or liabilities.

The Company has one Level 2 financial instrument, that being liability classified warrants that are recorded at fair value on a periodic basis. Warrants are evaluated under the hierarchy of FASB ASC Subtopic 480-10, FASB ASC Paragraph 815-25-1 and FASB ASC Subparagraph 815-10-15-74 addressing embedded derivatives. The fair value of such warrants is estimated using the Black-Scholes option pricing model. The foregoing warrants have certain anti-dilution and exercise price reset provisions which qualify the warrants to be classified as a liability under FASB ASC 815 (see note 8).

The Company had one Level 3 financial instrument during the nine months ended September 30, 2013, that being an embedded conversion feature that was accounted for as a derivative and recorded at fair value on a periodic basis. The embedded derivative was evaluated under the hierarchy of FASB ASC Subtopic 480-10, FASB ASC Paragraph 815-25-1 and FASB ASC Subparagraph 815-10-15-74 addressing embedded derivatives. The fair value of such embedded derivative was estimated using the Monte Carlo simulation model. The foregoing embedded derivative had certain anti-dilution and exercise price reset provisions which qualified the embedded derivative to be classified as a liability under FASB ASC 815. Upon the final settlement of the senior convertible notes issued in the July 2012 Private Placement (as defined below), this liability was extinguished as the underlying conversion option had been executed. As such, the fair value of the liability was reduced to zero upon conversion during the third quarter of 2013 (see note 7).

As of September 30, 2014, the following table represents the Company’s fair value hierarchy for items that are required to be measured at fair value on a recurring basis:

	Fair Value		Level 1		Level 2		Level 3
Warrant liabilities		4,981		-		4,981		-

Recent Accounting Pronouncements

Presentation of Items Reclassified out of Accumulated Other Comprehensive Income

In February 2013, the FASB issued an accounting standards update which requires disclosure related to items reclassified out of accumulated other comprehensive income (“AOCI”). The guidance requires entities to present separately, for each component of other comprehensive income (“OCI”), current period reclassifications and the remainder of the current-period OCI. In addition, for certain current period reclassifications, an entity is required to disclose the effect of the item reclassified out of AOCI on the respective line item of net income. The adoption of this pronouncement did not have a material impact on the Company’s Consolidated Financial Statements and accompanying disclosures.

Presentation of Unrecognized Tax Benefits

In July 2013, the FASB issued an accounting standards update which will require that an unrecognized tax benefit be presented on the balance sheet as a reduction of a deferred tax asset for a net operating loss or tax credit carryforward under certain circumstances. The adoption of this pronouncement did not have a material impact on the Company’s Consolidated Financial Statements and accompanying disclosures.

Revenue from Contracts with Customers

In May 2014, the FASB issued an accounting standards update which modifies the requirements for identifying, allocating, and recognizing revenue related to the achievement of performance conditions under contracts with customers. This update also requires additional disclosure related to the nature, amount, timing, and uncertainty of revenue that is recognized under contracts with customers. This guidance is effective beginning January 1, 2017 and is required to be applied retrospectively to all revenue arrangements. The Company is currently assessing the effects this guidance may have on its consolidated financial statements.

Ability to Continue as a Going Concern

In August 2014, the FASB issued an accounting standards update which requires an assessment of an entity’s ability to continue as a going concern by incorporating and expanding upon certain principles that are currently addressed by U.S. auditing standards. This standard is effective for the fiscal years ending after December 15, 2016, and for annual periods and interim periods thereafter. The Company is currently evaluating the new guidance to determine the impact it will have on its consolidated financial statements.

Other recent accounting pronouncements issued by the FASB (including its Emerging Issues Task Force), the AICPA and the SEC did not or are not believed by management to have a material impact on the Company's present or future consolidated financial statements.

XML

Note 7 - Convertible Note and Embedded Conversion Feature Liability (Details) (USD $) In Thousands, except Share data, unless otherwise specified	1 Months Ended	0 Months Ended	3 Months Ended	9 Months Ended				13 Months Ended		9 Months Ended		13 Months Ended
	Jul. 17, 2013	Jul. 02, 2012	Sep. 30, 2013	Sep. 30, 2013	Sep. 30, 2014	Dec. 31, 2013	Jul. 02, 2012 Private Placement [Member] Convertible Notes Payable [Member]	Jul. 31, 2013 Private Placement [Member]	Jul. 02, 2012 Private Placement [Member]	Sep. 30, 2014 Convertible Notes Payable [Member]	Sep. 30, 2013 Convertible Notes Payable [Member]	Jul. 31, 2013 Convertible Notes Payable [Member]
Note 7 - Convertible Note and Embedded Conversion Feature Liability (Details) [Line Items]
Debt Instrument, Face Amount							$ 12,000
Debt Instrument, Interest Rate, Stated Percentage							8.00%
Embedded Derivatives, Addition, Original Valuation									8,865
Warrants and Rights Outstanding					18,179	18,179			5,053
Embedded Conversion Feature Liability and Warrants									13,918
Debt Instrument, Unamortized Discount		12,000
Change in face value of the embedded conversion feature liability and warrants		1,918
Debt Conversion, Converted Instrument, Shares Issued (in Shares)	18,679,584							163,641,547
Gains (Losses) on Extinguishment of Debt	91		91	91
Stock Issued During Period, Shares, Conversion of Convertible Securities (in Shares)												163,641,547
Debt Instrument, Convertible, Conversion Price (in Dollars per share)							$ 0.352					$ 0.0774
Debt Instrument, Periodic Payment, Principal												12,000
Debt Instrument, Periodic Payment, Interest												680
Interest Expense, Debt										$ 0	$ 221

XML

Note 14 - Related Party Transactions (Details) (USD $)	1 Months Ended		0 Months Ended	1 Months Ended		9 Months Ended		1 Months Ended	0 Months Ended			9 Months Ended		0 Months Ended	1 Months Ended	12 Months Ended
	Feb. 28, 2013 Convertible Series A1 Preferred Stock [Member] Board of Directors Chairman [Member]	Feb. 27, 2013 Convertible Series A1 Preferred Stock [Member] Mr. Chitayat [Member]	Feb. 02, 2012 Convertible Series A1 Preferred Stock [Member] Chief Financial Officer [Member]	Feb. 28, 2013 Convertible Series A2 Preferred Stock [Member] Board of Directors Chairman [Member]	Feb. 27, 2013 Convertible Series A2 Preferred Stock [Member] Mr. Chitayat [Member]	Sep. 30, 2014 Innovative Materials Group [Member]	Sep. 30, 2013 Innovative Materials Group [Member]	Feb. 28, 2013 Board of Directors Chairman [Member] Common Stock [Member]	Aug. 05, 2013 Chief Executive Officer [Member] Common Stock [Member]	Aug. 03, 2013 Chief Executive Officer [Member] Restricted Stock [Member]	Mar. 27, 2014 Chief Executive Officer [Member]	Sep. 30, 2014 LLPG [Member]	Sep. 30, 2013 LLPG [Member]	Feb. 02, 2012 Common Stock [Member] Chief Financial Officer [Member]	Feb. 27, 2013 Common Stock [Member]	Dec. 31, 2013 Common Stock [Member]
Note 14 - Related Party Transactions (Details) [Line Items]
Royalty Revenue (in Dollars)						$ 5,000	$ 0
Conversion of Stock, Shares Converted	58,600	28,928	10,000	260,710	109,528
Conversion of Stock, Shares Issued								10,387,883						565,344	4,626,840	16,896,070
Sale of Stock, Number of Shares Issued in Transaction									400,000
Share-based Compensation Arrangement by Share-based Payment Award, Equity Instruments Other than Options, Vested in Period										1,200,000
Future Sale of Common Stock by Stock Holders, Shares											500,000
Revenue from Related Parties (in Dollars)												$ 0	$ 0

XML

Consolidated Balance Sheets (Current Period Unaudited) (USD $) In Thousands, unless otherwise specified	Sep. 30, 2014	Dec. 31, 2013
Current assets:
Cash	$ 11,902	$ 2,062
Trade accounts receivable, net of allowance for doubtful accounts	63	215
Prepaid expenses and other current assets	421	412
Total current assets	12,386	2,689
Property and equipment, net	1,101	249
Patents and trademarks, net	695	764
Other assets	28	401
Total assets	14,210	4,103
Current liabilities:
Accounts payable	275	361
Accrued liabilities	689	710
Deferred revenue	60
Convertible notes, net of debt discount	0	0
Embedded conversion feature liabilities on convertible notes	0	0
Total current liabilities	1,024	1,071
Long-term liabilities:
Warrant liabilities	4,981	4,921
Other long-term liabilities	856	856
Total liabilities	6,861	6,848
Stockholders' equity (deficit):
Preferred Stock, $0.001 par value; 10,000,000 shares authorized; 0 shares issued and outstanding at September 30, 2014 and December 31, 2013.	0	0
Common stock, $0.001 par value; 700,000,000 shares authorized at September 30, 2014 and December 31, 2013; 464,482,819 and 375,707,190 shares issued and outstanding at September 30, 2014 and December 31, 2013, respectively	464	376
Warrants	18,179	18,179
Additional paid-in capital	200,277	182,832
Accumulated deficit	(211,519)	(204,090)
Non-controlling interest in subsidiary	(52)	(42)
Total stockholders' equity (deficit)	7,349	(2,745)
Total liabilities and stockholders' equity (deficit)	$ 14,210	$ 4,103

XML

Consolidated Statements of Cash Flows (Unaudited) (USD $) In Thousands, unless otherwise specified	9 Months Ended
	Sep. 30, 2014	Sep. 30, 2013
Operating activities:
Net loss	$ (7,439)	$ (12,169)
Adjustments to reconcile net loss to net cash used in operating activities:
Depreciation and amortization	189	158
Gain on sale of fixed asset	(5)
Bad debt expense		11
Stock-based compensation	652	134
Restricted stock compensation issued to officer	234	234
Loss from change in value of warrants	276	1,715
Gain from change in value of embedded conversion feature liabilities		(621)
Gain on extinguishment of debt (Note 7)		(91)
Debt discount amortization	373	6,504
Non-cash interest expense		242
Changes in operating assets and liabilities:
Trade accounts receivable	152	(378)
Prepaid expenses and other current assets	(9)	(127)
Accounts payable and accrued liabilities	(113)	360
Deferred revenue	60
Net cash used in operating activities	(5,630)	(4,028)
Investing Activities:
Purchases of property and equipment	(957)	(172)
Proceeds from sale of fixed assets	5
Investment in patents and trademarks	(9)	(13)
Net cash used in investing activities	(961)	(185)
Financing Activities:
Proceeds from exercise of stock options	205	74
Proceeds from exercise of warrants	226
Proceeds from stock issuance	16,000
Net cash provided by financing activities	16,431	74
Net increase (decrease) in cash	9,840	(4,139)
Cash at beginning of period	2,062	7,162
Cash at end of period	11,902	3,023
Supplemental Schedule of Non-Cash Investing and Financing Activities:
Pre-installment payment of convertible debt and interest through common stock issuance		7,187
Dividends paid in common stock upon preferred stock conversion		$ 222

XML

Note 9 - Other Long-term Liabilities (Details) (USD $) In Thousands, unless otherwise specified	9 Months Ended
	Sep. 30, 2014	Dec. 31, 2013
Other Liabilities and Financial Instruments Subject to Mandatory Redemption [Abstract]
Other Liabilities, Noncurrent	$ 856	$ 856
Period for Outstanding Liability	5 years

XML

Accounting Policies, by Policy (Policies)

9 Months Ended

Sep. 30, 2014

Accounting Policies [Abstract]

Fair Value Measurement, Policy [Policy Text Block]

Fair Value Measurements

The estimated fair values of amounts reported in the consolidated financial statements have been determined using available market information and valuation methodologies, as applicable. The fair value of cash, trade receivables, prepaid expenses and other current assets, accounts payable, and accrued liabilities approximate their carrying value due to their short maturities. The fair value of non-current assets and liabilities approximate their carrying value unless otherwise stated.

Fair value is defined as the exchange price that would be received for an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date. Entities are required to maximize the use of observable inputs and minimize the use of unobservable inputs when measuring fair value based upon the following fair value hierarchy:

Level 1 — Quoted prices in active markets for identical assets or liabilities;

Level 2 — Observable inputs other than Level 1 prices, such as quoted prices for similar assets or liabilities; quoted prices in markets that are not active; or other inputs that are observable or can be corroborated by observable market data for substantially the full term of the assets or liabilities; and

Level 3 — Unobservable inputs that are supported by little or no market activity and that are significant to the fair value of the assets or liabilities.

The Company has one Level 2 financial instrument, that being liability classified warrants that are recorded at fair value on a periodic basis. Warrants are evaluated under the hierarchy of FASB ASC Subtopic 480-10, FASB ASC Paragraph 815-25-1 and FASB ASC Subparagraph 815-10-15-74 addressing embedded derivatives. The fair value of such warrants is estimated using the Black-Scholes option pricing model. The foregoing warrants have certain anti-dilution and exercise price reset provisions which qualify the warrants to be classified as a liability under FASB ASC 815 (see note 8).

The Company had one Level 3 financial instrument during the nine months ended September 30, 2013, that being an embedded conversion feature that was accounted for as a derivative and recorded at fair value on a periodic basis. The embedded derivative was evaluated under the hierarchy of FASB ASC Subtopic 480-10, FASB ASC Paragraph 815-25-1 and FASB ASC Subparagraph 815-10-15-74 addressing embedded derivatives. The fair value of such embedded derivative was estimated using the Monte Carlo simulation model. The foregoing embedded derivative had certain anti-dilution and exercise price reset provisions which qualified the embedded derivative to be classified as a liability under FASB ASC 815. Upon the final settlement of the senior convertible notes issued in the July 2012 Private Placement (as defined below), this liability was extinguished as the underlying conversion option had been executed. As such, the fair value of the liability was reduced to zero upon conversion during the third quarter of 2013 (see note 7).

As of September 30, 2014, the following table represents the Company’s fair value hierarchy for items that are required to be measured at fair value on a recurring basis:

	Fair Value		Level 1		Level 2		Level 3
Warrant liabilities		4,981		-		4,981		-

Revenue Recognition, Policy [Policy Text Block]

Revenue Recognition

Revenue is recognized pursuant to applicable accounting standards including FASB ASC Topic 605 (“ASC 605”), Revenue Recognition. ASC 605 summarizes certain points of the SEC staff’s views in applying generally accepted accounting principles to revenue recognition in financial statements and provides guidance on revenue recognition issues in the absence of authoritative literature addressing a specific arrangement or a specific industry.

The Company’s revenue recognition policy complies with the requirements of ASC 605. Revenue is recognized when (i) persuasive evidence of an arrangement exists, (ii) delivery has occurred, (iii) the sales price is fixed or determinable, (iv) collection is probable and (v) all obligations have been substantially performed pursuant to the terms of the arrangement. Revenues are derived primarily from the sales and prototyping of Liquidmetal mold and bulk alloys as well as licensing and royalties for the use of the Liquidmetal brand and bulk Liquidmetal alloys. Revenue is deferred and included in liabilities when the Company receives cash in advance for goods not yet delivered or if the licensing term has not begun.

License revenue arrangements in general provide for the grant of certain intellectual property rights for patented technologies owned or controlled by the Company. These rights typically include the grant of an exclusive or non-exclusive right to manufacture and/or sell products covered by patented technologies owned or controlled by the Company. The intellectual property rights granted may be perpetual in nature, extending until the expiration of the related patents, or can be granted for a defined period of time.

Licensing revenues that are one time fees upon the granting of the license are recognized when (i) the license term begins in a manner consistent with the nature of the transaction and the earnings process, (ii) collectability is reasonably assured or upon receipt of an upfront fee, and (iii) all other revenue recognition criteria have been met. Pursuant to the terms of these types of licensing agreements, the Company has no further obligation with respect to the grant of the license once the license is granted. Licensing revenues that are related to royalties are recognized as the royalties are earned over the related period.

New Accounting Pronouncements, Policy [Policy Text Block]

Recent Accounting Pronouncements

Presentation of Items Reclassified out of Accumulated Other Comprehensive Income

In February 2013, the FASB issued an accounting standards update which requires disclosure related to items reclassified out of accumulated other comprehensive income (“AOCI”). The guidance requires entities to present separately, for each component of other comprehensive income (“OCI”), current period reclassifications and the remainder of the current-period OCI. In addition, for certain current period reclassifications, an entity is required to disclose the effect of the item reclassified out of AOCI on the respective line item of net income. The adoption of this pronouncement did not have a material impact on the Company’s Consolidated Financial Statements and accompanying disclosures.

Presentation of Unrecognized Tax Benefits

In July 2013, the FASB issued an accounting standards update which will require that an unrecognized tax benefit be presented on the balance sheet as a reduction of a deferred tax asset for a net operating loss or tax credit carryforward under certain circumstances. The adoption of this pronouncement did not have a material impact on the Company’s Consolidated Financial Statements and accompanying disclosures.

Revenue from Contracts with Customers

In May 2014, the FASB issued an accounting standards update which modifies the requirements for identifying, allocating, and recognizing revenue related to the achievement of performance conditions under contracts with customers. This update also requires additional disclosure related to the nature, amount, timing, and uncertainty of revenue that is recognized under contracts with customers. This guidance is effective beginning January 1, 2017 and is required to be applied retrospectively to all revenue arrangements. The Company is currently assessing the effects this guidance may have on its consolidated financial statements.

Ability to Continue as a Going Concern

In August 2014, the FASB issued an accounting standards update which requires an assessment of an entity’s ability to continue as a going concern by incorporating and expanding upon certain principles that are currently addressed by U.S. auditing standards. This standard is effective for the fiscal years ending after December 15, 2016, and for annual periods and interim periods thereafter. The Company is currently evaluating the new guidance to determine the impact it will have on its consolidated financial statements.

Other recent accounting pronouncements issued by the FASB (including its Emerging Issues Task Force), the AICPA and the SEC did not or are not believed by management to have a material impact on the Company's present or future consolidated financial statements.

XML

Note 10 - Stock Compensation Plan (Details) (USD $) In Thousands, except Share data, unless otherwise specified	3 Months Ended		9 Months Ended
	Sep. 30, 2014	Sep. 30, 2013	Sep. 30, 2014	Sep. 30, 2013	Sep. 30, 2014 Employee Stock Option [Member] Equity Incentive Plan 2012 [Member]	Dec. 31, 2013 Employee Stock Option [Member] Equity Incentive Plan 2012 [Member]	Sep. 30, 2014 2002 Equity Incentive Plan [Member]	Dec. 31, 2013 2002 Equity Incentive Plan [Member]	Sep. 30, 2014 Equity Incentive Plan 2012 [Member]
Note 10 - Stock Compensation Plan (Details) [Line Items]
Share-based Compensation Arrangement by Share-based Payment Award, Number of Shares Available for Grant							10,000,000
Share-based Compensation Arrangement by Share-based Payment Award, Options, Outstanding, Number					25,917,066	13,127,500	1,733,000	2,607,000
Share-based Compensation Arrangement by Share-based Payment Award, Number of Shares Authorized									30,000,000
Share-based Compensation Arrangement by Share-based Payment Award, Options, Grants in Period, Gross					15,292,914
Share-based Compensation (in Dollars)	$ 226	$ 50	$ 652	$ 134

XML

Note 8 - Warrant Liability (Tables)

9 Months Ended

Sep. 30, 2014

Disclosure Text Block [Abstract]

Schedule of Derivative Liabilities at Fair Value [Table Text Block]

	Visser MTA		July 2, 2012
	Agreement		Private Placement			Total
Beginning Balance - December 31, 2013	$	2,559	$	2,362			4,921
Change in value of warrant liability, loss	$	33	$	243			276
Reclassification to equity upon warrant exercise		-		(216	)		(216	)
Ending Balance - September 30, 2014	$	2,592	$	2,389		$	4,981

XML

Note 1 - Description of Business

9 Months Ended

Sep. 30, 2014

Disclosure Text Block [Abstract]

Business Description and Basis of Presentation [Text Block]

1. Description of Business

Liquidmetal Technologies, Inc. (the “Company”) is a materials technology company that develops and commercializes products made from amorphous alloys. The Company’s family of alloys consists of a variety of proprietary bulk alloys and composites that utilize the advantages offered by amorphous alloy technology. The Company designs, develops and sells products and components from bulk amorphous alloys to customers in various industries. The Company also partners with third-party manufacturers and licensees to develop and commercialize Liquidmetal alloy products.

Amorphous alloys are, in general, unique materials that are distinguished by their ability to retain a random atomic structure when they solidify, in contrast to the crystalline atomic structures that form in other metals and alloys when they solidify. Liquidmetal alloys are proprietary amorphous alloys that possess a combination of performance, processing, and potential cost advantages that the Company believes will make them preferable to other materials in a variety of applications. The amorphous atomic structure of the Company’s alloys enables them to overcome certain performance limitations caused by inherent weaknesses in crystalline atomic structures, thus facilitating performance and processing characteristics superior in many ways to those of their crystalline counterparts. For example, in laboratory testing, zirconium-titanium Liquidmetal alloys are approximately 250% stronger than commonly used titanium alloys such as Ti-6Al-4V, but they also have some of the beneficial processing characteristics more commonly associated with plastics. The Company believes these advantages could result in Liquidmetal alloys supplanting high-performance alloys, such as titanium and stainless steel, and other incumbent materials in a variety of applications. Moreover, the Company believes these advantages could enable the introduction of entirely new products and applications that are not possible or commercially viable with other materials.

The Company’s revenues are derived from i) selling bulk Liquidmetal alloy products, which include non-consumer electronic devices, aerospace parts, medical products, automotive components, oil and gas exploration, and sports and leisure goods, ii) selling tooling and prototype parts such as demonstration parts and test samples for customers with products in development, iii) product licensing and royalty revenue, and iv) research and development revenue.

XML

Consolidated Balance Sheets (Current Period Unaudited) (Parentheticals) (USD $)	Sep. 30, 2014	Dec. 31, 2013
Preferred Stock, par value (in Dollars per share)	$ 0.001	$ 0.001
Preferred Stock, shares authorized	10,000,000	10,000,000
Preferred Stock, shares issued	0	0
Preferred Stock, shares outstanding	0	0
Common stock, par value (in Dollars per share)	$ 0.001	$ 0.001
Common stock, shares authorized	700,000,000	700,000,000
Common stock, shares issued	464,482,819	375,707,190
Common stock, shares outstanding	464,482,819	375,707,190

XML

Note 11 - Shareholders' Equity (Deficit)

9 Months Ended

Sep. 30, 2014

Stockholders' Equity Note [Abstract]

Stockholders' Equity Note Disclosure [Text Block]

11. Stockholders’ Equity (Deficit)

Common stock

In June 2012, the Company issued 30,000,000 shares of common stock to Visser in connection with the Visser MTA Agreement (see note 3).

Pursuant to the terms of the Company’s Senior Convertible Notes issued in the July 2012 Private Placement, the Company opted to pay the twelve monthly installment payments prior to the September 1, 2013 maturity date with shares of the Company’s common stock. Upon final settlement, the Company had issued 163,641,547 shares of common stock at a weighted average conversion price of $0.0774, for the twelve installment payments due under the notes, consisting of $12,000 principal and $680 of interest (see notes 3 and 7).

During the year ended December 31, 2013, the holders of the Company’s Series A Preferred Stock converted all of the outstanding 506,936 shares of Series A Preferred Stock into 16,896,070 shares of the Company’s common stock (see “Preferred stock” below). After giving effect to such conversion, the Company has no shares of preferred stock outstanding.

On February 28, 2013, the Company’s stockholders approved an amendment to the Certificate of Incorporation of the Company increasing the number of authorized shares of common stock from 400 million shares to 500 million shares.

On October 24, 2013, the Company’s stockholders approved an amendment to the Company’s Certificate of Incorporation increasing the number of authorized shares of common stock from 500 million shares to 700 million shares.

In connection with the execution of the 2013 Purchase Agreement, the Company issued to each of the 2013 Investors a pro rata portion of 2,666,667 shares of the Company’s common stock. As of September 30, 2014, the Company had received an aggregate of $16,000 under the 2013 Purchase Agreement through the issuance of 85,355,615 share of its common stock at a weighted average issuance price of $0.19 (see note 3).

During the nine months ended September 30, 2014, the Company issued 2,242,014 shares of common stock and received $205 in connection with stock options that were exercised by certain employees of the Company at a weighted average exercise price of $0.09.

Preferred stock

On May 1, 2009, pursuant to a Securities Purchase and Exchange Agreement, the Company issued 500,000 shares of convertible Series A-1 Preferred Stock with an original issue price of $5.00 per share and 2,625,000 shares of Series A-2 Preferred Stock with an original issue price of $5.00 per share as part of a financing transaction (The Series A-1 Preferred Stock and the Series A-2 Preferred Stock are referred to collectively herein as the “Series A Preferred Stock”). In connection with this Series A Preferred Stock issuance, the Company issued warrants to purchase 42,329,407 shares of the Company’s common stock at an exercise price of $0.50 per share, which was subsequently adjusted to $0.49 per share due to an anti-dilution calculation. These warrants expire on July 15, 2015.

In October 2009, the Company entered into an agreement with various investors to issue 180,000 shares of Series A-1 Preferred Stock with identical terms as the Series A-1 Preferred Stock issued on May 1, 2009. In connection with this issuance, the Company issued warrants to purchase up to 4,500,000 shares of common stock with an exercise price of $0.50 per share, which was subsequently adjusted to $0.49 per share due to an anti-dilution calculation. These warrants also expire on July 15, 2015.

The Series A Preferred Stock and any accrued and unpaid dividends thereon was convertible, at the option of the holders of the Series A Preferred Stock, into common stock of the Company at a conversion price of $0.10 per share in the case of the Series A-1 Preferred Stock and a conversion price of $0.22 per share in the case of the Series A-2 Preferred Stock (in both cases subject to adjustments for any stock dividends, splits, combinations and similar events).

During the year ended December 31, 2012, the holders of the Company’s Series A Preferred Stock converted 792,215 shares of Series A Preferred Stock into 25,669,752 shares of the Company’s common stock. As of December 31, 2012, the Company had 506,936 shares of Series A Preferred Stock outstanding, consisting of 105,231 and 401,705 shares of Series A-1 and Series A-2 Preferred Stock, respectively. Accrued dividends on the Series A Preferred Stock as of December 31, 2012 were $222.

During the year ended December 31, 2013, all of the holders of the Company’s Series A Preferred Stock converted all of the outstanding shares of Series A Preferred Stock and accrued dividends into 16,896,070 shares of the Company’s common stock. Therefore, as of December 31, 2013, the Company no longer had any outstanding Series A Preferred Stock and the related $222 of accrued dividends were reclassified to additional paid-in capital as of December 31, 2013.

Warrants

In connection with the Series A Preferred Stock issuances, warrants to purchase 29,779,557 shares of the Company’s common stock were outstanding as of September 30, 2014 and December 31, 2013. Due to extension of the expiration date of these warrants, they no longer contain anti-dilution provisions and are reflected as equity as they do not meet the criteria under FASB ASC 815 for liability treatment. Warrants classified as equity were recorded at $18,179 as of September 30, 2014 and December 31, 2013. Such warrants have exercise prices ranging between $0.48 and $0.49 and expire on July 15, 2015.

Non-Controlling Interest

The Company’s Liquidmetal Golf subsidiary has the exclusive right and license to utilize the Company’s Liquidmetal alloy technology for purposes of golf equipment applications. Liquidmetal Technologies owns 79% of the outstanding common stock of Liquidmetal Golf. As of September 30, 2014, non-controlling interest was a deficit of $52. The December 31, 2013 non-controlling interest was a deficit of $42.

XML

Document And Entity Information	9 Months Ended
	Sep. 30, 2014	Nov. 07, 2014
Document and Entity Information [Abstract]
Entity Registrant Name	LIQUIDMETAL TECHNOLOGIES INC
Document Type	10-Q
Current Fiscal Year End Date	--12-31
Entity Common Stock, Shares Outstanding		464,482,819
Amendment Flag	false
Entity Central Index Key	0001141240
Entity Current Reporting Status	Yes
Entity Voluntary Filers	No
Entity Filer Category	Smaller Reporting Company
Entity Well-known Seasoned Issuer	No
Document Period End Date	Sep. 30, 2014
Document Fiscal Year Focus	2014
Document Fiscal Period Focus	Q3

XML

Note 12 - Loss Per Common Share

9 Months Ended

Sep. 30, 2014

Earnings Per Share [Abstract]

Earnings Per Share [Text Block]

12. Loss Per Common Share

Basic earnings per share (“EPS”) is computed by dividing earnings (loss) attributable to common stockholders by the weighted average number of common shares outstanding for the applicable periods. Diluted EPS reflects the potential dilution of securities that could share in the earnings.

Options to purchase 27,650,066 shares of common stock, at prices ranging from $0.08 to $2.33 per share, were outstanding at September 30, 2014, but were not included in the computation of diluted EPS for the same period as the inclusion would have been antidilutive, given the Company’s net loss. Warrants to purchase 66,057,792 shares of common stock, with prices ranging from $0.18 to $0.49 per share, outstanding at September 30, 2014 were not included in the computation of diluted EPS for the same period as the inclusion would have been antidilutive, given the Company’s net loss.

Options to purchase 15,397,500 shares of common stock, at prices ranging from $0.08 to $2.49 per share, were outstanding at September 30, 2013, but were not included in the computation of diluted EPS for the same period as the inclusion would have been antidilutive, given the Company’s net loss. Warrants to purchase 67,069,319 shares of common stock, with prices ranging from $0.18 to $0.49 per share, outstanding at September 30, 2013 were not included in the computation of diluted EPS for the same period as the inclusion would have been antidilutive, given the Company’s net loss.

XML

Consolidated Statements of Operations and Comprehensive Loss (unaudited) (USD $) In Thousands, except Share data, unless otherwise specified	3 Months Ended		9 Months Ended
	Sep. 30, 2014	Sep. 30, 2013	Sep. 30, 2014	Sep. 30, 2013
Revenue
Products	$ 97	$ 456	$ 374	$ 721
Licensing and royalties			36	7
Total revenue	97	456	410	728
Cost of sales	85	396	300	589
Gross profit	12	60	110	139
Operating expenses
Selling, marketing, general and administrative	1,847	1,213	5,719	3,735
Research and development	498	368	1,224	829
Total operating expenses	2,345	1,581	6,943	4,564
Operating loss	(2,333)	(1,521)	(6,833)	(4,425)
Change in value of warrants, gain (loss)	1,595	(2,511)	(276)	(1,715)
Change in value of embedded conversion feature liabilities, gain (loss)		(2,435)		621
Debt discount amortization expense	(321)	(361)	(373)	(6,504)
Interest expense		(21)		(242)
Interest and other income	41	1	43	5
Gain on extinguishment of debt (Note 7)		91		91
Net loss	(1,018)	(6,757)	(7,439)	(12,169)
Net loss attributable to non-controlling interest	2	32	10	40
Net loss and comprehensive loss attributable to Liquidmetal Technologies shareholders	$ (1,016)	$ (6,725)	$ (7,429)	$ (12,129)
Net loss per common share attributable to Liquidmetal Technologies shareholders, basic and diluted (in Dollars per share)	$ 0.00	$ (0.02)	$ (0.02)	$ (0.04)
Number of weighted average shares - basic and diluted (in Shares)	464,269,486	372,840,523	433,757,751	330,329,312

XML

Note 6 - Patents and Trademarks, net

9 Months Ended

Sep. 30, 2014

Disclosure Text Block [Abstract]

Intangible Assets Disclosure [Text Block]

6. Patents and Trademarks, net

Net patents and trademarks totaled $695 and $764 as of September 30, 2014 and December 31, 2013, respectively, and primarily consisted of purchased patent rights and internally developed patents.

Purchased patent rights represent the exclusive right to commercialize the bulk amorphous alloy and other amorphous alloy technology acquired from California Institute of Technology (“Caltech”), through a license agreement with Caltech and other institutions. All fees and other amounts payable by the Company for these rights and licenses have been paid or accrued in full, and no further royalties, license fees or other amounts will be payable in the future under the license agreement.

In addition to the purchased and licensed patents, the Company has internally developed patents. Internally developed patents include legal and registration costs incurred to obtain the respective patents. The Company currently holds various patents and numerous pending patent applications in the United States, as well as numerous foreign counterparts to these patents outside of the United States.

The Company amortizes capitalized patents and trademarks over an average of 10 to 17 year periods. Amortization expense for patents and trademarks was $78 and $90 for the nine month periods ended September 30, 2014 and 2013, respectively.

XML

Note 5 - Prepaid Expenses and Other Current Assets

9 Months Ended

Sep. 30, 2014

Prepaid Expenses And Other Current Assets [Abstract]

Prepaid Expenses And Other Current Assets [Text Block]

5. Prepaid Expenses and Other Current Assets

Prepaid expenses and other current assets totaled $421 and $412 as of September 30, 2014 and December 31, 2013, respectively and primarily consisted of prepaid invoices and insurance premiums that will be reclassified to expense as shipments are made to customers or services are provided.

XML

Note 2 - Basis of Presentation and Recent Accounting Pronoucements (Tables)

9 Months Ended

Sep. 30, 2014

Disclosure Text Block [Abstract]

Schedule of Fair Value, Assets and Liabilities Measured on Recurring Basis [Table Text Block]

	Fair Value		Level 1		Level 2		Level 3
Warrant liabilities		4,981		-		4,981		-

XML

Note 13 - Commitments and Contingencies

9 Months Ended

Sep. 30, 2014

Commitments and Contingencies Disclosure [Abstract]

Commitments and Contingencies Disclosure [Text Block]

13. Commitments and Contingencies

Operating Lease Commitments

The Company leases its office and warehouse facility under a lease agreement that expires on April 30, 2016. Rent payments are subject to escalations through the end of the lease term. Rent expense was $50 and $150 for the three and nine months ended September 30, 2014, respectively. Rent expense was $50 and $150 for the three and nine months ended September 30, 2013, respectively.

During October 2014 this lease agreement was amended to extend through July 2023 (see footnote 15).

XML

Note 9 - Other Long-term Liabilities

9 Months Ended

Sep. 30, 2014

Other Liabilities and Financial Instruments Subject to Mandatory Redemption [Abstract]

Other Liabilities Disclosure [Text Block]

9. Other Long-term Liabilities  

Other long-term liabilities balance was $856 as of September 30, 2014 and December 31, 2013, and consisted of long-term, aged payables to vendors, individuals, and other third parties that have been outstanding for more than 5 years. The Company is in the process of researching and resolving the balances for settlement and/or write-off in accordance with applicable accounting rules.

XML

Note 7 - Convertible Note and Embedded Conversion Feature Liability

9 Months Ended

Sep. 30, 2014

Debt Disclosure [Abstract]

Debt Disclosure [Text Block]

7. Convertible Note and Embedded Conversion Feature Liability

On July 2, 2012, the Company entered into the July 2012 Private Placement pursuant to which it issued $12,000 in principal amount of Senior Convertible Notes (“Senior Convertible Notes”) that were due on September 1, 2013 (see note 3). Pursuant to ASC 815-40, due to the anti-dilution provision of the Senior Convertible Notes, the conversion feature of the Senior Convertible Notes is not indexed to the Company’s own stock and should be bifurcated and recognized as a derivative liability in the consolidated balance sheets and measured at fair value. The Senior Convertible Notes bore interest at 8% per annum and were payable in twelve equal monthly installments of principal and interest beginning on October 1, 2012.

The embedded conversion feature liability and warrants issued in connection with the Senior Convertible Notes were valued utilizing the Monte Carlo simulation and Black Sholes pricing model at $8,865 and $5,053, respectively, totaling $13,918 as of July 2, 2012. $12,000 of this total was recorded as debt discount and the excess of the face value of the embedded conversion feature liability and warrants of $1,918 was booked to debt discount amortization on July 2, 2012.

Pursuant to the terms of the Senior Convertible Notes, the Company opted to pay the first eleven monthly installment payments due prior to June 30, 2013 with shares of the Company’s common stock. On July 17, 2013, the Company and each of the holders of the Senior Convertible Notes agreed to cause all remaining principal and interest under the Senior Convertible Notes to be converted into an aggregate of 18,679,584 shares of the Company’s common stock in full satisfaction of the notes.  As a result of this conversion, the Senior Convertible Notes were paid off in full and are no longer outstanding as of the conversion date. As the final conversion occurred pursuant to terms that were not included in the original terms of the Senior Convertible Notes, the Company recorded a gain on extinguishment of debt in the amount of $91 which consisted of the write-off of unamortized debt discount, unamortized debt issuance costs, embedded conversion feature liabilities, and the difference between the reacquisition price of the shares issued and the contractual conversion price of the Senior Convertible Notes.

Upon final settlement, the Company had issued 163,641,547 shares of common stock, at a weighted average conversion price of $0.0774, for the twelve installment payments due under the Senior Convertible Notes, consisting of $12,000 principal and $680 of interest.

Interest expense on the Senior Convertible Notes was $0 and $221 for the nine month periods ended September 30, 2014 and 2013, respectively.

XML

Note 8 - Warrant Liability

9 Months Ended

Sep. 30, 2014

Disclosure Text Block [Abstract]

Derivatives and Fair Value [Text Block]

8. Warrant Liability

Pursuant to FASB ASC 815, the Company is required to report the value of certain warrants as a liability at fair value and record the changes in the fair value of the warrant liabilities as a gain or loss in its statement of operations due to the price-based anti-dilution rights of the warrants.

During June 2012, the Company issued warrants to purchase a total of 15,000,000 shares of common stock to Visser under the Visser MTA Agreement (see note 3). These warrants had an original exercise price of $0.22 per share, expire on June 1, 2017 and were originally valued at $4,260. These warrants have certain anti-dilution provisions which qualify the warrants to be classified as a liability under FASB ASC 815. As a result of paying down the Senior Convertible Notes with common stock and stock issuances under the 2013 Purchase Agreement, which resulted in an anti-dilution impact, the exercise price of these warrants was reduced to $0.18 as of both September 30, 2014 and December 31, 2013. In addition, the number of shares to be issued under the warrants as a result of the anti-dilution provisions increased to 18,706,235 as of September 30, 2014 and 18,562,825 as of December 31, 2013. As of September 30, 2014, these warrants were valued at $2,592 under the Black Sholes valuation model utilizing the following assumptions: (i) expected life of 2.67 years, (ii) volatility of 119%, (iii) risk-free interest rate of 1.07%, and (iv) dividend rate of 0. The change in warrant value for these warrants for the nine months ended September 30, 2014 was a loss of $33.

On July 2, 2012, the Company issued warrants to purchase a total of 18,750,000 shares of common stock related to the July 2012 Private Placement (see note 3). These warrants have an exercise price of $0.384 per share, expire on July 2, 2017 and were originally valued at $5,053. The foregoing warrants have certain anti-dilution and exercise price reset provisions which qualify the warrants to be classified as a liability under FASB ASC 815. As a result of executed draw-downs under the 2013 Purchase Agreement, which resulted in an anti-dilution impact, as well as contractually defined price resets following the second anniversary of the July 2012 Private Placement, the exercise price of these warrants was reduced to $0.19 as of September 30, 2014. As of September 30, 2014, these warrants were valued at $2,389 under the Black Sholes valuation model utilizing the following assumptions: (i) expected life of 2.75 years, (ii) volatility of 117%, (iii) risk-free interest rate of 1.07%, and (iv) dividend rate of 0. The change in warrant value for these warrants for the nine months ended September 30, 2014 was a loss of $243.

On July 8, 2014, an investor party to the July 2012 Private Placement exercised 1,178,000 warrants at an exercise price of $0.19 per share. Upon exercise, the Company received $226, and the associated warrant liability of $216 was reclassified to additional paid in capital.

The following table summarizes the change in the Company’s warrant liability as of September 30, 2014:

	Visser MTA		July 2, 2012
	Agreement		Private Placement			Total
Beginning Balance - December 31, 2013	$	2,559	$	2,362			4,921
Change in value of warrant liability, loss	$	33	$	243			276
Reclassification to equity upon warrant exercise		-		(216	)		(216	)
Ending Balance - September 30, 2014	$	2,592	$	2,389		$	4,981

The Company had warrants to purchase 66,057,792 and 67,092,382 shares of common stock outstanding as of September 30, 2014 and December 31, 2013, respectively. Of these, warrants to purchase 36,278,235 shares were valued and classified as a liability under FASB ASC 815.

XML

Note 10 - Stock Compensation Plan

9 Months Ended

Sep. 30, 2014

Disclosure of Compensation Related Costs, Share-based Payments [Abstract]

Disclosure of Compensation Related Costs, Share-based Payments [Text Block]

10. Stock Compensation Plan

Under the Company’s 2002 Equity Incentive Plan (the “2002 Plan”), which provided for the grant of stock options to officers, employees, consultants and directors of the Company and its subsidiaries, the Company granted options to purchase the Company’s common stock. A total of 10,000,000 shares of our common stock were available for issuance under the 2002 Plan. The 2002 Plan expired by its terms in April 2012, but it will remain in effect only with respect to the equity awards that had been granted prior to its expiration. The Company had outstanding grants of options to purchase 1,733,000 and 2,607,000 shares of the Company’s common stock under the 2002 Plan as of September 30, 2014 and December 31, 2013, respectively.

On June 28, 2012, the Company adopted the 2012 Equity Incentive Plan, with the approval of the stockholders, which provides for the grant of stock options to officers, employees, consultants and directors of the Company and its subsidiaries. A total of 30,000,000 shares of our common stock are available for issuance under the 2012 Equity Incentive Plan. All options granted under this plan have exercise prices that are equal to the fair market value on the dates of grant. During the nine months ended September 30, 2014, the Company granted options to purchase 15,292,914 shares of common stock under this plan. Under this plan, the Company has outstanding grants of options to purchase 25,917,066 and 13,127,500 shares of the Company’s common stock as of September 30, 2014 and December 31, 2013, respectively.

Stock based compensation expense attributable to these plans was $226 and $652 for the three and nine months ended September 30, 2014, respectively, compared to $50 and $134 for the three and nine months ended September 30, 2013. The increase was due to higher grant date fair values associated with 2014 stock option grants.

XML

Note 8 - Warrant Liability (Details) - Warrant Liability Activity (USD $) In Thousands, unless otherwise specified	3 Months Ended		9 Months Ended			0 Months Ended	9 Months Ended
	Sep. 30, 2014	Sep. 30, 2013	Sep. 30, 2014	Sep. 30, 2013	Sep. 30, 2014 Visser MTA Agreement [Member]	Jul. 08, 2014 Private Placement [Member]	Sep. 30, 2014 Private Placement [Member]	Jul. 02, 2012 Private Placement [Member]
Note 8 - Warrant Liability (Details) - Warrant Liability Activity [Line Items]
Beginning Balance - December 31, 2013			$ 4,921		$ 2,559		$ 2,362	$ 5,053
Change in value of warrant liability, loss	(1,595)	2,511	276	1,715	33		243
Reclassification to equity upon warrant exercise			(216)			(216)	(216)
Ending Balance - September 30, 2014	$ 4,981		$ 4,981		$ 2,592		$ 2,389	$ 5,053

XML

Note 15 - Subsequent Event

9 Months Ended

Sep. 30, 2014

Subsequent Events [Abstract]

Subsequent Events [Text Block]

15. Subsequent Event

During October 2014, the Company has amended the lease agreement covering its office and warehouse facility for an additional seven year period subsequent to the original expiration of the existing lease. The terms of the amendment are consistent with those of the original lease.

XML

Note 2 - Basis of Presentation and Recent Accounting Pronoucements (Details) (USD $)	Sep. 30, 2013
Disclosure Text Block [Abstract]
Embedded Derivative, Fair Value of Embedded Derivative Liability	$ 0

XML

Consolidated Statement of Shareholders' Equity (Deficit) (unaudited) (USD $) In Thousands, except Share data	Common Stock [Member]	Warrant [Member]	Additional Paid-in Capital [Member]	Retained Earnings [Member]	Noncontrolling Interest [Member]	Total
Balance, December 31, 2013 at Dec. 31, 2013	$ 376	$ 18,179	$ 182,832	$ (204,090)	$ (42)	$ (2,745)
Balance, December 31, 2013 (in Shares) at Dec. 31, 2013	375,707,190
Common stock issuance	85		15,915			16,000
Common stock issuance (in Shares)	85,355,615
Stock option exercises	2		203			205
Stock option exercises (in Shares)	2,242,014
Warrant exercises	1		225			226
Warrant exercises (in Shares)	1,178,000
Stock-based compensation			652			652
Restricted stock issued to officer			234			234
Reclassification of warrant liability to equity upon exercise			216			216
Net loss				(7,429)	(10)	(7,439)
Balance, September 30, 2014 at Sep. 30, 2014	$ 464	$ 18,179	$ 200,277	$ (211,519)	$ (52)	$ 7,349
Balance, September 30, 2014 (in Shares) at Sep. 30, 2014	464,482,819

XML

Note 4 - Liquidity and Capital Resources

9 Months Ended

Sep. 30, 2014

Liquidityand Capital Resource [Abstract]

Liquidityand Capital Resource [Text Block]

4. Liquidity and Capital Resources

For the nine months ended September 30, 2014, the Company’s cash used in operations was $5,630, cash used in investing activities was $961, primarily consisting of capital expenditures to support the manufacturing efforts of the Company, and cash provided by financing activities was $16,431. As of September 30, 2014, the Company’s cash balance was $11,902.

On August 20, 2014, the Company entered into the 2014 Purchase Agreement which allows it to raise up to $30,000 through periodic issuances of common stock over a three year period. As of September 30, 2014, the Company has not executed any transactions under this agreement.

On November 8, 2013, the Company entered into the 2013 Purchase Agreement which allowed it to raise up to $20,000 through periodic issuances of common stock over a three year period. Throughout 2014, the Company received an aggregate of $16,000 under the 2013 Purchase Agreement through the issuance of 85,355,615 shares of its common stock at a weighted average price of $0.19 per share. This agreement was effectively terminated on August 25, 2014.

The Company anticipates that its current capital resources, when considering expected losses from operations, will be sufficient to fund the Company’s operations through the end of 2015. The Company has a relatively limited history of producing bulk amorphous alloy components and products on a mass-production scale. Furthermore, the ability of future contract manufacturers to produce the Company’s products in desired quantities and at commercially reasonable prices is uncertain and is dependent on a variety of factors that are outside of the Company’s control, including the nature and design of the component, the customer’s specifications, and required delivery timelines. These factors will likely require that the Company make future equity sales under the 2014 Purchase Agreement, raise additional funds by other means, or pursue other strategic initiatives to support its operations beyond the end of 2015. There is no assurance that the Company will be able to make equity sales under the 2014 Purchase Agreement or raise additional funds by other means on acceptable terms, if at all. If the Company were to make equity sales under the 2014 Purchase Agreement or to raise additional funds through other means by issuing securities, existing stockholders may be diluted. If funding is insufficient at any time in the future, the Company may be required to alter or reduce the scope of its operations or to cease operations entirely.

XML

Note 2 - Basis of Presentation and Recent Accounting Pronoucements (Details) - Fair Value of Items Measured on a Recurring Basis (Fair Value, Measurements, Recurring [Member], USD $) In Thousands, unless otherwise specified	Sep. 30, 2014
Note 2 - Basis of Presentation and Recent Accounting Pronoucements (Details) - Fair Value of Items Measured on a Recurring Basis [Line Items]
Warrant liabilities	$ 4,981
Fair Value, Inputs, Level 2 [Member]
Note 2 - Basis of Presentation and Recent Accounting Pronoucements (Details) - Fair Value of Items Measured on a Recurring Basis [Line Items]
Warrant liabilities	$ 4,981

XML

Note 12 - Loss Per Common Share (Details) (USD $)						9 Months Ended						9 Months Ended
	Oct. 31, 2009	Sep. 30, 2014 Equity Option [Member] Minimum [Member]	Sep. 30, 2013 Equity Option [Member] Minimum [Member]	Sep. 30, 2014 Equity Option [Member] Maximum [Member]	Sep. 30, 2013 Equity Option [Member] Maximum [Member]	Sep. 30, 2014 Equity Option [Member]	Sep. 30, 2013 Equity Option [Member]	Sep. 30, 2014 Warrant [Member] Minimum [Member]	Sep. 30, 2013 Warrant [Member] Minimum [Member]	Sep. 30, 2014 Warrant [Member] Maximum [Member]	Sep. 30, 2013 Warrant [Member] Maximum [Member]	Sep. 30, 2014 Warrant [Member]	Sep. 30, 2013 Warrant [Member]	Sep. 30, 2014 Minimum [Member]	Sep. 30, 2014 Maximum [Member]
Note 12 - Loss Per Common Share (Details) [Line Items]
Antidilutive Securities Excluded from Computation of Earnings Per Share, Amount (in Shares)						27,650,066	15,397,500					66,057,792	67,069,319
Share-based Compensation Arrangement by Share-based Payment Award, Options, Outstanding, Weighted Average Exercise Price		$ 0.08	$ 0.08	$ 2.33	$ 2.49
Class of Warrant or Right, Exercise Price of Warrants or Rights	$ 0.50							$ 0.18	$ 0.18	$ 0.49	$ 0.49			$ 0.48	$ 0.49

XML

Note 14 - Related Party Transactions

9 Months Ended

Sep. 30, 2014

Related Party Transactions [Abstract]

Related Party Transactions Disclosure [Text Block]

14. Related Party Transactions

The Company entered into a license agreement (the “IMG License Agreement”) with Innovative Materials Group, LLC (“IMG”), a California limited liability company which is majority owned by Mr. Kang, a former Chief Executive Officer and former Chairman of the Company, to license certain patents and technical information for the limited purpose of manufacturing certain licensed products with the Company’s first generation die cast machines. The IMG License Agreement granted a non-exclusive license to certain product categories and obligated IMG to pay the Company a running royalty based on its sales of licensed products through August 5, 2021. The Company recognized $5 and $0 in royalty revenues from IMG during the nine months ended September 30, 2014 and September 30, 2013, respectively.

On February 1, 2012, Mr. Tony Chung, the Company’s Chief Financial Officer, converted his 10,000 shares of Series A-1 Preferred Stock into a total of 565,344 shares of the Company’s common stock, including dividends received in the form of common stock.

In February 2013, Mr. Abdi Mahamedi, the Company’s Chairman, converted his 58,600 shares of Series A-1 Preferred Stock and 260,710 shares of Series A-2 Preferred Stock into a total of 10,387,883 shares of the Company’s common stock, including dividends received in the form of common stock.

Mr. Thomas Steipp, the Company’s Chief Executive Officer, sold an aggregate of 400,000 shares of the common stock of the Company on August 5, 2013 pursuant to a trading plan that Mr. Steipp previously adopted under SEC Rule 10b5-1 under the Securities Exchange Act of 1934, as amended. Mr. Steipp adopted the trading plan on March 22, 2013 for the purpose of providing him with funds to satisfy certain tax liabilities as a result of the vesting on August 3, 2013 of 1,200,000 shares of Company restricted common stock held by Mr. Steipp. The restricted shares were granted to Mr. Steipp in 2010 under a previously disclosed Restricted Stock Award Agreement, dated August 3, 2010, between Mr. Steipp and the Company. On March 27, 2014, Mr. Steipp adopted a new 10b5-1 trading plan that allowed for the sale of 500,000 shares of common stock of the Company on August 4, 2014, and will allow for future sales of 500,000 shares of common stock of the Company on August 4, 2015.

In September 2013, the Company entered into Change of Control Agreements with Ricardo A. Salas, the Company’s Executive Vice President, Tony Chung, the Company’s Chief Financial Officer, and certain other executive officers who are not named executive officers of the Company for SEC reporting purposes. The Change of Control Agreements provide that if the executive officer’s employment with the Company is terminated without cause during the one-year period after a change of control of the Company, then the terminated officer will receive lump sum severance compensation in an amount equal to twelve months of his then-current base salary. Under the agreements, each of the executive officers will also be entitled to the above-described severance compensation in the event he terminates his own employment within one year after a change of control because of a salary decrease or assignment to a lower-level position. In addition, upon termination, all unvested stock options related to these officers will automatically and immediately vest and shall thereafter be exercisable in accordance with the terms and provisions of the applicable award agreements.

The Company has an exclusive license agreement with LLPG, Inc. (“LLPG”), a corporation owned principally by Jack Chitayat, a former director of the Company. Under the terms of the agreement, LLPG has the right to commercialize Liquidmetal alloys, particularly precious-metal based compositions, in jewelry and high-end luxury product markets.  The Company, in turn, will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by LLPG.    The exclusive license agreement with LLPG expires on December 31, 2021. There were no revenues recognized from product sales and licensing fees from LLPG during the nine months ended September 30, 2014 or 2013.

On February 27, 2013, Mr. Chitayat converted his 28,928 shares of Series A-1 Preferred Stock and 109,528 shares of Series A-2 Preferred Stock into a total of 4,626,840 shares of the Company’s common stock, including dividends received in the form of common stock.

On June 1, 2012, the Company entered into the Visser MTA Agreement relating to a strategic transaction for manufacturing services and financing. In November 2013, the Company and Visser entered into arbitration proceedings to resolve disputes associated with this agreement. As part of the May 2014 settlement of these proceedings, the Company has granted to Visser a fully paid-up, royalty-free, irrevocable, perpetual, worldwide, non-transferable, nonexclusive sublicense to all of the Company’s intellectual property developed on or prior to May 20, 2014, for all fields of use other than certain excluded fields as set forth therein. Visser does not have any rights, now or in the future, to intellectual property of the Company developed after the Effective Date of the agreement. The license to the Company’s intellectual property does not include the right to use the “Liquidmetal” trademark or any of the Company’s other trademarks, except in certain defined situations, as set forth in the amended and restated agreement entered into in connection with the settlement (see note 3).