UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C.  20549

FORM 10-K

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE

SECURITIES EXCHANGE ACT OF 1934

For year ended December 31, 2019

Commission file number 001-16407

ZIMMER BIOMET HOLDINGS, INC.

(Exact name of registrant as specified in its charter)

Delaware	13-4151777
(State of Incorporation)	(IRS Employer Identification No.)
345 East Main Street Warsaw, Indiana	46580
(Address of principal executive offices)	(Zip Code)

Registrant’s telephone number, including area code:  (574) 267-6131

Securities registered pursuant to Section 12(b) of the Act:

Title of each class	Trading Symbol(s)	Name of each exchange on which registered
Common Stock, $0.01 par value	ZBH	New York Stock Exchange
1.414% Notes due 2022	ZBH 22A	New York Stock Exchange
2.425% Notes due 2026 1.164% Notes due 2027	ZBH 26 ZBH 27	New York Stock Exchange New York Stock Exchange

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.

Yes  ☒    No  ☐

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.

Yes  ☐    No  ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  ☒    No  ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).    Yes  ☒    No  ☐

Indicate by checkmark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company.  See the definitions of “large accelerated filer”, “accelerated filer”, “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer	☒	Accelerated filer	☐
Non-accelerated filer	☐	Smaller reporting company	☐
		Emerging growth company	☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.  ☐

Indicate by checkmark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).    Yes  ☐    No  ☒

The aggregate market value of shares held by non-affiliates was $24,106,325,697 (based on the closing price of these shares on the New York Stock Exchange on June 28, 2019 and assuming solely for the purpose of this calculation that all directors and executive officers of the registrant are “affiliates”).  As of February 7, 2020, 206,403,646 shares of the registrant’s $.01 par value common stock were outstanding.  

Documents Incorporated by Reference

Document	Form 10-K
Portions of the Proxy Statement with respect to the 2020 Annual Meeting of Stockholders	Part III

ZIMMER BIOMET HOLDINGS, INC.

ANNUAL REPORT

Cautionary Note Regarding Forward-Looking Statements

This Annual Report contains forward-looking statements within the meaning of federal securities laws, including, among others, statements regarding sales and earnings guidance and any statements about our expectations, plans, strategies or prospects.  We generally use the words “may,” “will,” “expects,” “believes,” “anticipates,” “plans,” “estimates,” “projects,” “assumes,” “guides,” “targets,” “forecasts,” “sees,” “seeks,” “should,” “could,” “would,” “predicts,” “potential,” “strategy,” “future,” “opportunity,” “work toward,” “intends,” “guidance,” “confidence,” “positioned,” “design,” “strive,” “continue,” “look forward to” and similar expressions to identify forward-looking statements.  All statements other than statements of historical or current fact are, or may be deemed to be, forward-looking statements.  Such statements are based upon the current beliefs, expectations and assumptions of management and are subject to significant risks, uncertainties and changes in circumstances that could cause actual outcomes and results to differ materially from the forward-looking statements.  These risks, uncertainties and changes in circumstances include, but are not limited to:  the possibility that the anticipated synergies and other benefits from mergers and acquisitions will not be realized, or will not be realized within the expected time periods; the risks and uncertainties related to our ability to successfully integrate the operations, products, employees and distributors of acquired companies; the risks and uncertainties related to our ability to successfully execute our restructuring plans; the effect of the potential disruption of management’s attention from ongoing business operations due to integration matters related to mergers and acquisitions; the effect of mergers and acquisitions on our relationships with customers, suppliers and lenders and on our operating results and businesses generally; compliance with the Deferred Prosecution Agreement (“DPA”) entered into in January 2017; the success of our quality and operational excellence initiatives, including ongoing quality remediation efforts at our Warsaw North Campus facility; challenges relating to changes in and compliance with governmental laws and regulations affecting our U.S. and international businesses, including regulations of the U.S. Food and Drug Administration (“FDA”) and foreign government regulators, such as more stringent requirements for regulatory clearance of products; the ability to remediate matters identified in any inspectional observations or warning letters issued by the FDA, while continuing to satisfy the demand for our products; the outcome of government investigations; competition; pricing pressures; changes in customer demand for our products and services caused by demographic changes or other factors; the impact of healthcare reform measures; reductions in reimbursement levels by third-party payors and cost containment efforts of healthcare purchasing organizations; dependence on new product development, technological advances and innovation; shifts in the product category or regional sales mix of our products and services; supply and prices of raw materials and products; control of costs and expenses; the ability to obtain and maintain adequate intellectual property protection; breaches or failures of our information technology systems or products, including by cyberattack, unauthorized access or theft; the ability to form and implement alliances; changes in tax obligations arising from tax reform measures, including European Union rules on state aid, or examinations by tax authorities; product liability, intellectual property and commercial litigation losses; the ability to retain the independent agents and distributors who market our products; dependence on a limited number of suppliers for key raw materials and outsourced activities; the impact of substantial indebtedness on our ability to service our debt obligations and/or refinance amounts outstanding under our debt obligations at maturity on terms favorable to us, or at all; changes in general industry and market conditions, including domestic and international growth rates; changes in general domestic and international economic conditions, including interest rate and currency exchange rate fluctuations; and the impact of the ongoing financial and political uncertainty on countries in the Euro zone on the ability to collect accounts receivable in affected countries.  

See also the section titled “Risk Factors” (refer to Part I, Item 1A of this report) for further discussion of certain risks and uncertainties that could cause actual results and events to differ materially from the forward-looking statements.  Readers of this report are cautioned not to rely on these forward-looking statements, since there can be no assurance that these forward-looking statements will prove to be accurate.  Forward-looking statements speak only as of the date they are made, and we expressly disclaim any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise.  You are advised, however, to consult any further disclosures we make on related subjects in our Quarterly Reports on Form 10-Q and Current Reports on Form 8-K.  This cautionary note is applicable to all forward-looking statements contained in this report.

TABLE OF CONTENTS

		Page
PART I		4
Item 1.	Business	4
Item 1A.	Risk Factors	14
Item 1B.	Unresolved Staff Comments	26
Item 2.	Properties	27
Item 3.	Legal Proceedings	27
Item 4.	Mine Safety Disclosures	27
PART II		28
Item 5.	Market for the Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities	28
Item 6.	Selected Financial Data	29
Item 7.	Management’s Discussion and Analysis of Financial Condition and Results of Operations	30
Item 7A.	Quantitative and Qualitative Disclosures About Market Risk	43
Item 8.	Financial Statements and Supplementary Data	46
Item 9.	Changes in and Disagreements with Accountants on Accounting and Financial Disclosure	96
Item 9A.	Controls and Procedures	96
Item 9B.	Other Information	97
PART III		98
Item 10.	Directors, Executive Officers and Corporate Governance	98
Item 11.	Executive Compensation	98
Item 12.	Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters	98
Item 13.	Certain Relationships and Related Transactions and Director Independence	98
Item 14.	Principal Accountant Fees and Services	98
PART IV		99
Item 15.	Exhibits and Financial Statement Schedules	99
Item 16.	Form 10-K Summary	104

PART I

Item 1. Business

Overview

Zimmer Biomet is a global leader in musculoskeletal healthcare.  We design, manufacture and market orthopedic reconstructive products; sports medicine, biologics, extremities and trauma products; office based technologies; spine, craniomaxillofacial and thoracic products; dental implants; and related surgical products.  We collaborate with healthcare professionals around the globe to advance the pace of innovation.  Our products and solutions help treat patients suffering from disorders of, or injuries to, bones, joints or supporting soft tissues.  Together with healthcare professionals, we help millions of people live better lives.  In this report, “Zimmer Biomet,” “we,” “us,” “our,” “the Company” and similar words refer collectively to Zimmer Biomet Holdings, Inc. and its subsidiaries.  “Zimmer Biomet Holdings” refers to the parent company only.  

Zimmer Biomet Holdings was incorporated in Delaware in 2001.  Our history dates to 1927, when Zimmer Manufacturing Company, a predecessor, was founded in Warsaw, Indiana.  On August 6, 2001, we were spun off from our former parent and became an independent public company.  In 2015, we acquired LVB Acquisition, Inc. (“LVB”), the parent company of Biomet, Inc. (“Biomet”), and LVB and Biomet became our wholly-owned subsidiaries (sometimes hereinafter referred to as the “Biomet merger” or the “merger”).  In connection with the merger, we changed our name from Zimmer Holdings, Inc. to Zimmer Biomet Holdings, Inc.

Customers, Sales and Marketing

Our primary customers include orthopedic surgeons, neurosurgeons, oral surgeons, and other specialists, dentists, hospitals, stocking distributors, healthcare dealers and, in their capacity as agents, healthcare purchasing organizations or buying groups.  These customers range from large multinational enterprises to independent clinicians and dentists.  

We market and sell products through three principal channels:  1) direct to healthcare institutions, such as hospitals, referred to as direct channel accounts; 2) through stocking distributors and healthcare dealers; and 3) directly to dental practices and dental laboratories.  With direct channel accounts and some healthcare dealers, inventory is generally consigned to sales agents or customers.  With sales to stocking distributors, some healthcare dealers, dental practices and dental laboratories, title to product passes upon shipment.  Consignment sales represented approximately 80 percent of our net sales in 2019.  No individual customer accounted for more than 1 percent of our net sales for 2019.

We stock inventory in our warehouse facilities and retain title to consigned inventory in an effort to have sufficient quantities available when products are needed for surgical procedures.  Safety stock levels are determined based on a number of factors, including demand, manufacturing lead times and quantities required to maintain service levels.  

We also carry trade accounts receivable balances based on credit terms that are generally consistent with local market practices.

We utilize a network of sales associates, sales managers and support personnel, some of whom are employed or contracted by independent distributors and sales agencies.  We invest a significant amount of time and expense in training sales associates in how to use specific products and how to best inform surgeons of product features and uses.  Sales force representatives must have strong technical selling skills and medical education to provide technical support for surgeons.

In response to the different healthcare systems throughout the world, our sales and marketing strategies and organizational structures differ by region.  We utilize a global approach to sales force training, marketing and medical education to provide consistent, high quality service.  Additionally, we keep current with key surgical developments and other issues related to orthopedic surgeons, neurosurgeons, other specialists, dentists and oral surgeons and the medical and dental procedures they perform.

We allocate resources to achieve our operating profit goals through seven operating segments.  Our operating segments are comprised of both geographic and product category business units.  We are organized through a combination of geographic and product category operating segments for various reasons, including the distribution channels through which products are sold.  Our product category operating segments generally have distribution channels focused specifically on those product categories, whereas our geographic operating segments have

4

distribution channels that sell multiple product categories.  The following is a summary of our seven operating segments.  See Note 18 to our consolidated financial statements for more information regarding our segments.

Americas.  The Americas geographic operating segment is our largest operating segment.  The U.S. accounts for 94 percent of net sales in this region.  The U.S. sales force consists of a combination of employees and independent sales agents, most of whom sell products exclusively for Zimmer Biomet.  The sales force in the U.S. receives a commission on product sales and is responsible for many operating decisions and costs.  

In this region, we contract with group purchasing organizations and managed care accounts and have promoted unit growth by offering volume discounts to customer healthcare institutions within a specified group.  Generally, we are designated as one of several preferred purchasing sources for specified products, although members are not obligated to purchase our products.  Contracts with group purchasing organizations generally have a term of three years, with extensions as warranted.  

In the Americas, we monitor and rank independent sales agents and our direct sales force across a range of performance metrics, including the achievement of sales targets and maintenance of efficient levels of working capital.  

EMEA.  The EMEA geographic operating segment is our second largest operating segment.  France, Germany, Italy, Spain and the United Kingdom collectively account for 55 percent of net sales in the region.  This segment also includes other key markets, including Switzerland, Benelux, Nordic, Central and Eastern Europe, the Middle East and Africa.  Our sales force in this segment is comprised of direct sales associates, commissioned agents, independent distributors and sales support personnel.  We emphasize the advantages of our clinically proven, established designs and innovative solutions and new and enhanced materials and surfaces.  In most European countries, healthcare is sponsored by the government and therefore government budgets impact healthcare spending, which can affect our sales in this segment.  

Asia Pacific.  The Asia Pacific geographic operating segment includes key markets such as Japan, China, Australia, New Zealand, Korea, Taiwan, India, Thailand, Singapore, Hong Kong and Malaysia.  Japan is the largest market within this segment, accounting for 47 percent of the region’s sales.  In Japan and most countries in the Asia Pacific region, we maintain a network of dealers, who act as order agents on behalf of hospitals in the region, and sales associates, who build and maintain relationships with orthopedic surgeons and neurosurgeons in their markets.  The knowledge and skills of these sales associates play a critical role in providing service, product information and support to surgeons.  

Spine, less Asia Pacific (“Spine”).  The Spine product category operating segment includes all spine product results except those in Asia Pacific.  The U.S. accounts for the majority of sales in this operating segment.  The market dynamics of the Spine business are similar to those described in the geographic operating segments.  However, our Spine business maintains a separate sales force of employees and independent sales agents.  

Office Based Technologies.  Our Office Based Technologies product category operating segment only sells to U.S. customers.  In this product category, we market our products to doctors who prescribe them for use by patients.  The products are mostly provided directly by Zimmer Biomet to patients and are paid for through patients’ insurance or by patients themselves.  Products are also sold through wholesale channels on a limited basis.

Craniomaxillofacial and Thoracic (“CMF”).  Our CMF product category operating segment competes across the world through a combination of direct and independent sales agents.  The U.S. accounts for the majority of sales in this operating segment.  The U.S. sales force consists of a combination of employees and independent sales agents.  Internationally, our primary customers are independent stocking distributors who market our products to their customers.  

Dental. Our Dental product category operating segment competes across the world.  Our sales force is primarily composed of employees who market our products to customers.  We sell directly to dental practices or dental laboratories, or to independent stocking distributors depending on the market.  

Seasonality

Our business is seasonal in nature to some extent, as many of our products are used in elective procedures, which typically decline during the summer months and can increase at the end of the year once annual deductibles have been met on health insurance plans.  Additionally, with sales to customers where title to product passes upon

5

shipment, these customers may purchase items in large quantities if incentives are offered or if there are new product offerings in a market, which could cause period-to-period differences in sales.  

Distribution

We distribute our products both through large, centralized warehouses and through smaller, market specific facilities, depending on the needs of the market.  We maintain large, centralized warehouses in the U.S. and Europe to be able to efficiently distribute our products to customers in those regions.  In addition to these centralized warehouses, we maintain smaller distribution facilities in the U.S. and in each of the countries where we have a direct sales presence.  In many locations, our inventory is consigned to the healthcare institution.

We generally ship our orders via expedited courier.  Since most of our sales occur at the time of an elective procedure, we generally do not have firm orders.

Products

Our products include orthopedic reconstructive products; sports medicine, biologics, extremities and trauma products; office based technologies; spine and CMF products; dental implants; and related surgical products.  

Knees

Total knee replacement surgeries typically include a femoral component, a patella (knee cap), a tibial tray and an articular surface (placed on the tibial tray).  Knee replacement surgeries include first-time, or primary, joint replacement procedures and revision procedures for the replacement, repair or enhancement of an implant or component from a previous procedure.  There are also procedures for partial reconstruction of the knee, which treat limited knee degeneration and involve the replacement of only one side, or compartment, of the knee with a unicompartmental knee prosthesis.  A developing trend in knee replacement surgeries is the use of robotic technologies to assist a surgeon with implant positioning.  In 2019, we entered the robotic assistance market with our ROSA^® Knee System.  In the future, we plan to expand the use of our ROSA^® Robot to other product categories.

Our significant knee brands include the following:  

• Persona^® The Personalized Knee System

• NexGen^® Complete Knee Solution  

• Vanguard^® Knee

• Oxford^® Partial Knee

Hips

Total hip replacement surgeries replace both the head of the femur and the socket portion of the pelvis (acetabulum) of the natural hip.  Hip procedures include first-time, or primary, joint replacement as well as revision procedures.  Hip implant procedures involve the use of bone cement to attach or affix the prosthetic components to the surrounding bone, or are press-fit into bone, which means that they have a surface that bone affixes to through either ongrowth or ingrowth technologies.

Our significant hip brands include the following:  

• Taperloc^® Hip System

• Zimmer^® M/L Taper Hip Prosthesis

• Arcos^® Modular Hip System

• Continuum^® Acetabular System

• G7^® Acetabular System

6

S.E.T.

Our S.E.T. product category includes surgical, sports medicine, biologics, foot and ankle, extremities and trauma products.  Our surgical products are used to support various surgical procedures.  Our sports medicine products are primarily for the repair of soft tissue injuries, most commonly used in the knee and shoulder.  Our biologics products are used as early intervention for joint preservation or to support surgical procedures.  Our foot and ankle and extremities products are designed to treat arthritic conditions and fractures in the foot, ankle, shoulder, elbow and wrist.  Our trauma products are used to stabilize damaged or broken bones and their surrounding tissues to support the body’s natural healing process.

Our significant S.E.T. brands include the following:  

• A.T.S.^® Tourniquet Systems

• JuggerKnot^® Soft Anchor System

• Gel-One^®1 Cross-linked Hyaluronate

• Zimmer^® Trabecular Metal^TM Reverse Shoulder System 

• Comprehensive^® Shoulder

• Zimmer^® Natural Nail^® System

• A.L.P.S.^® Plating System

SPINE and CMF

Our spine products division designs, manufactures and distributes medical devices and surgical instruments to deliver comprehensive solutions for individuals with back or neck pain caused by degenerative conditions, deformities or traumatic injury of the spine.  Our CMF division includes face and skull reconstruction products as well as products that fixate and stabilize the bones of the chest in order to facilitate healing or reconstruction after open heart surgery, trauma or for deformities of the chest.

Our significant spine and CMF brands include the following:  

• Polaris™ Spinal System

• Mobi-C^® Cervical Disc

• SternaLock^® Blu Closure System

• SternaLock^® Rigid Sternal Fixation

DENTAL

Our dental products division manufactures and/or distributes: 1) dental reconstructive implants – for individuals who are totally without teeth or are missing one or more teeth; 2) dental prosthetic products – aimed at providing a more natural restoration to resemble the original teeth; and 3) dental regenerative products – for soft tissue and bone rehabilitation.

Our significant dental brands include the following:  

• Tapered Screw-Vent^® Implant System

• 3i T3^® Implant

¹  Registered trademark of Seikagaku Corporation

7

OTHER

Our other product category primarily includes our bone cement and office based technology products.  

Research and Development

We have extensive research and development activities to develop new surgical techniques, including robotic techniques, materials, biologics and product designs.  The research and development teams work closely with our strategic brand marketing function.  The rapid commercialization of innovative new materials, biologics products, implant and instrument designs and surgical techniques remains one of our core strategies and continues to be an important driver of sales growth.

We are broadening our offerings in certain of our product categories and exploring new technologies with possible applications in multiple areas.  Our primary research and development facility is located in Warsaw, Indiana.  We have other research and development personnel based in, among other places, Canada, China, France, Switzerland and other U.S. locations.  As of December 31, 2019, we employed approximately 2,100 research and development employees worldwide.

We expect to continue to identify innovative technologies, which may include acquiring complementary products or businesses, establishing technology licensing arrangements or strategic alliances.  

Government Regulation and Compliance

Our operations, products and customers are subject to extensive government regulation by numerous government agencies, both within and outside the U.S.  Our global regulatory environment is increasingly stringent, unpredictable and complex. There is a global trend toward increased regulatory activity related to medical products.

In the U.S., numerous laws and regulations govern all the processes by which our products are brought to market.  These include, among others, the Federal Food, Drug and Cosmetic Act (“FDCA”) and regulations issued or promulgated thereunder.  The U.S. Food and Drug Administration (“FDA”) has enacted regulations that control all aspects of the development, manufacture, advertising, promotion and postmarket surveillance of medical products, including medical devices.  In addition, the FDA controls the access of products to market through processes designed to ensure that only products that are safe and effective are made available to the public.

Most of our new products fall into an FDA medical device classification that requires the submission of a Premarket Notification (510(k)) to the FDA.  This process requires us to demonstrate that the device to be marketed is at least as safe and effective as, that is, substantially equivalent to, a legally marketed device.  We must submit information that supports our substantial equivalency claims.  Before we can market the new device, we must receive an order from the FDA finding substantial equivalence and clearing the new device for commercial distribution in the U.S.  

Other devices we develop and market are in a category (class) for which the FDA has implemented stringent clinical investigation and Premarket Approval (“PMA”) requirements.  The PMA process requires us to provide clinical and laboratory data that establishes that the new medical device is safe and effective.  The FDA will approve the new device for commercial distribution if it determines that the data and information in the PMA application constitute valid scientific evidence and that there is reasonable assurance that the device is safe and effective for its intended use(s).  

All of our devices marketed in the U.S. have been cleared or approved by the FDA, with the exception of some devices which are classified by FDA regulation as exempt from premarket clearance and approval or were in commercial distribution prior to May 28, 1976.

Both before and after a product is commercially released, we have ongoing responsibilities under FDA regulations.  The FDA reviews design and manufacturing practices, labeling and record keeping, and manufacturers’ required reports of adverse experiences and other information to identify potential problems with marketed medical devices.  We are also subject to periodic inspection by the FDA for compliance with its Quality System Regulation (21 CFR Part 820) (“QSR”), among other FDA requirements, such as requirements for advertising and promotion of our devices.  Our manufacturing operations, and those of our third-party manufacturers, are required to comply with the QSR, which addresses a company’s responsibility for product design, testing and manufacturing quality assurance and the maintenance of records and documentation.  The QSR requires that each manufacturer establish a quality system by which the manufacturer monitors the manufacturing process and maintains records that show compliance with FDA regulations and the manufacturer’s written specifications and procedures relating to the devices.  QSR

8

compliance is necessary to receive and maintain FDA clearance or approval to market new and existing products and is also necessary for distributing in the U.S. certain devices exempt from FDA clearance and approval requirements.  The FDA conducts announced and unannounced periodic and on-going inspections of medical device manufacturers to determine compliance with the QSR.  If in connection with these inspections the FDA believes the manufacturer has failed to comply with applicable regulations and/or procedures, it may issue inspectional observations on Form FDA-483 (“Form 483”) that would necessitate prompt corrective action.  If FDA inspectional observations are not addressed and/or corrective action is not taken in a timely manner and to the FDA’s satisfaction, the FDA may issue a warning letter (which would similarly necessitate prompt corrective action) and/or proceed directly to other forms of enforcement action, including the imposition of operating restrictions, including a ceasing of operations, on one or more facilities, enjoining and restraining certain violations of applicable law pertaining to products, seizure of products, and assessing civil or criminal penalties against our officers, employees or us.  The FDA could also issue a corporate warning letter or a recidivist warning letter or negotiate the entry of a consent decree of permanent injunction with us.  The FDA may also recommend prosecution to the U.S. Department of Justice (“DOJ”).  Any adverse regulatory action, depending on its magnitude, may restrict us from effectively manufacturing, marketing and selling our products and could have a material adverse effect on our business, financial condition and results of operations.  For information regarding certain warning letters and Form 483 inspectional observations that we are addressing, see Note 20 to our consolidated financial statements.

The FDA, in cooperation with U.S. Customs and Border Protection (“CBP”), administers controls over the import of medical devices into the U.S. and can prevent the importation of products the FDA deems to violate the FDCA or its implementing regulations.  The CBP imposes its own regulatory requirements on the import of our products, including inspection and possible sanctions for noncompliance.  We are also subject to foreign trade controls administered by certain U.S. government agencies, including the Bureau of Industry and Security within the Commerce Department and the Office of Foreign Assets Control within the Treasury Department (“OFAC”).  In addition, exported medical products are subject to the regulatory requirements of each country to which the medical product is exported.

There are also requirements of state and local governments that we must comply with in the manufacture and marketing of our products.

In many of the countries in which our products are sold, we are subject to supranational, national, regional and local regulations affecting, among other things, the development, design, manufacturing, product standards, packaging, advertising, promotion, labeling, marketing and postmarket surveillance of medical products, including medical devices.  The member countries of the European Union (the “EU”) have adopted the European Medical Device Directive (the “MDD”), which creates a single set of medical device regulations for products marketed in all member countries.  Compliance with the MDD and certification to a quality system (e.g., ISO 13485 certification) enable the manufacturer to place a CE mark on its products.  To obtain authorization to affix the CE mark to a product, a recognized European Notified Body must assess a manufacturer’s quality system and the product’s conformity to the requirements of the MDD.  We are subject to inspection by the Notified Bodies for compliance with these requirements.  In May 2017, a new EU Medical Device Regulation (“MDR”) was published that will replace the MDD and will impose significant additional premarket and postmarket requirements beginning in May 2020.  Under a corrigendum to the MDR finalized in December 2019, some low-risk medical devices being up-classified as a result of the MDR, including low-risk instruments, may now receive a four-year transitional period to comply.

Our quality management system is based upon the requirements of ISO 13485, the QSR, the MDD and other applicable regulations for the markets in which we sell.  Our principal manufacturing sites are certified to ISO 13485 and audited at regular intervals.  Additionally, our principal sites are certified under the Medical Device Single Audit Program (“MDSAP”), which is a voluntary audit program developed by regulatory authorities in five countries (i.e., Australia, Brazil, Canada, Japan, and the United States) to assess compliance with the quality management system regulatory requirements of those countries.  MDSAP audits are conducted by an MDSAP-recognized auditing organization and can fulfill the needs of the participating regulatory jurisdictions, replacing standard surveillance audits by the regulatory authorities in those countries.

Further, we are subject to other supranational, national, regional, federal, state and local laws concerning healthcare fraud and abuse, including false claims and anti-kickback laws, as well as the U.S. Physician Payments Sunshine Act and similar state and foreign healthcare professional payment transparency laws.  These laws are administered by, among others, the DOJ, the Office of Inspector General of the Department of Health and Human Services (“OIG-HHS”), state attorneys general and various foreign government agencies.  Many of these agencies have increased their enforcement activities with respect to medical products manufacturers in recent years.  Violations of

9

these laws are punishable by criminal and/or civil sanctions, including, in some instances, fines, imprisonment and, within the U.S., exclusion from participation in government healthcare programs, including Medicare, Medicaid and Veterans Administration health programs.  

Our operations in foreign countries are subject to the extraterritorial application of the U.S. Foreign Corrupt Practices Act (“FCPA”).  Our global operations are also subject to foreign anti-corruption laws, such as the United Kingdom (“UK”) Bribery Act, among others.  As part of our global compliance program, we seek to address anti-corruption risks proactively.  On January 12, 2017, we resolved previously-disclosed FCPA matters involving Biomet and certain of its subsidiaries.  As part of that settlement, we entered into a Deferred Prosecution Agreement (“DPA”) with the DOJ.  For information regarding the DPA, see Note 20 to our consolidated financial statements.  

Our facilities and operations are also subject to complex federal, state, local and foreign environmental and occupational safety laws and regulations, including those relating to discharges of substances in the air, water and land, the handling, storage and disposal of wastes and the clean-up of properties contaminated by pollutants.  We do not expect that the ongoing costs of compliance with these environmental requirements will have a material impact on our consolidated earnings, capital expenditures or competitive position.

In addition, we are subject to federal, state and international data privacy and security laws and regulations that govern the collection, use, disclosure, transfer, storage, disposal and protection of health-related and other personal information.  The FDA has issued guidance to which we may be subject concerning data security for medical devices.  The FDA and the Department of Homeland Security (“DHS”) have issued urgent safety communications regarding cybersecurity vulnerabilities of certain medical devices.  

In addition, certain of our affiliates are subject to privacy, security and breach notification regulations promulgated under the Health Insurance Portability and Accountability Act of 1996 and the Health Information Technology for Economic and Clinical Health Act (collectively, “HIPAA”).  HIPAA governs the use, disclosure, and security of protected health information by HIPAA “covered entities” and their “business associates.”  Covered entities are health plans, health care clearinghouses and health care providers that engage in specific types of electronic transactions.  A business associate is any person or entity (other than members of a covered entity’s workforce) that performs a service on behalf of a covered entity involving the use or disclosure of protected health information.  The U.S. Department of Health and Human Services (“HHS”) (through the Office for Civil Rights) has direct enforcement authority against covered entities and business associates with regard to compliance with HIPAA regulations.  On December 12, 2018, the Office for Civil Rights of HHS issued a request for information seeking input from the public on how the HIPAA regulations could be modified to amend existing obligations relating to the processing of protected health information.  We will monitor this process and assess the impact of changes to the HIPAA regulations to our business.

In addition to the FDA guidance and HIPAA regulations described above, a number of U.S. states have also enacted data privacy and security laws and regulations that govern the collection, use, disclosure, transfer, storage, disposal and protection of personal information, such as social security numbers, medical and financial information and other information.  These laws and regulations may be more restrictive and not preempted by U.S. federal laws.   For example, several U.S. territories and all 50 states now have data breach laws that require timely notification to individuals, and at times regulators, the media or credit reporting agencies, if a company has experienced the unauthorized access or acquisition of personal information. Other state laws include the California Consumer Privacy Act (“CCPA”), which was signed into law on June 28, 2018 and largely took effect on January 1, 2020.  The CCPA, among other things, contains new disclosure obligations for businesses that collect personal information about California residents and affords those individuals numerous rights relating to their personal information that may affect our ability to use personal information or share it with our business partners. Regulations from the California Attorney General have not been finalized, and it is expected that additional amendments to the CCPA will be introduced.  Meanwhile, a number of other states have considered privacy laws like the CCPA, and in October 2019, Nevada enacted a similar but generally less restrictive privacy law.  We will continue to monitor and assess the impact of these state laws, which may impose substantial penalties for violations, impose significant costs for investigation and compliance, allow private class-action litigation, and carry significant potential liability for our business.

Outside of the U.S., data protection laws, including the EU General Data Protection Regulation (the “GDPR”) and member state implementing legislation, and the Brazil Lei Geral de Proteção de Dados (the “LGPD”), also apply to some of our operations in the countries in which we provide services to our customers.  Legal requirements in these countries relating to the collection, storage, processing and transfer of personal data continue to evolve.  The GDPR, which became effective on May 25, 2018, imposes, among other things, data protection requirements that include

10

strict obligations and restrictions on the ability to collect, analyze and transfer EU personal data, a requirement for prompt notice of data breaches to data subjects and supervisory authorities in certain circumstances, and possible substantial fines for any violations (including possible fines for certain violations of up to the greater of 20 million Euros or 4% of total worldwide annual turnover of the preceding financial year).

Failure to comply with U.S. and international data protection laws and regulations could result in government enforcement actions (which could include civil and/or criminal penalties), private litigation and/or adverse publicity and could negatively affect our operating results and business.

Competition

The orthopedics and broader musculoskeletal care industry is highly competitive.  In the global markets for our knees, hips, and S.E.T. products, our major competitors include the DePuy Synthes Companies of Johnson & Johnson, Stryker Corporation and Smith & Nephew plc.  There are smaller competitors in these product categories as well who have success by focusing on smaller subsegments of the industry.  

In the spine and CMF categories, we compete globally primarily with the spinal and biologic business of Medtronic plc, the DePuy Synthes Companies, Stryker Corporation, NuVasive, Inc. and Globus Medical, Inc.

In the dental implant category, we compete primarily with The Straumann Group, Dentsply Sirona Inc. and Nobel Biocare Services AG (part of Envista Holdings Corporation).

Competition within the industry is primarily based on technology, innovation, quality, reputation, customer service and pricing.  A key factor in our continuing success in the future will be our ability to develop new products and technologies and improve existing products and technologies.  

Manufacturing and Raw Materials

We manufacture our products at various sites.  We also strategically outsource some manufacturing to qualified suppliers who are highly capable of producing components.  

The manufacturing operations at our facilities are designed to incorporate the cellular concept for production and to implement tenets of a manufacturing philosophy focused on continuous improvement efforts in product quality, lead time reduction and capacity optimization.  Our continuous improvement efforts are driven by Lean and Six Sigma methodologies.  In addition, at certain of our manufacturing facilities, many of the employees are cross-trained to perform a broad array of operations.

We generally target operating our manufacturing facilities at optimal levels of total capacity.  We continually evaluate the potential to in‑source and outsource production as part of our manufacturing strategy to provide value to our stakeholders.

In most of our manufacturing network, we have improved our manufacturing processes to harmonize and optimize our quality systems and to protect our profitability and offset the impact of inflationary costs.  We have, for example, employed computer-assisted robots and multi-axis grinders to precision polish medical devices; automated certain manufacturing and inspection processes, including on-machine inspection and process controls; purchased state-of-the-art equipment; in-sourced core products and processes; and negotiated cost reductions from third-party suppliers.  

We use a diverse and broad range of raw materials in the manufacturing of our products.  We purchase all of our raw materials and select components used in manufacturing our products from external suppliers.  In addition, we purchase some supplies from single sources for reasons of quality assurance, sole source availability, cost effectiveness or constraints resulting from regulatory requirements.  We work closely with our suppliers to assure continuity of supply while maintaining high quality and reliability.  To date, we have not experienced any significant difficulty in locating and obtaining the materials necessary to fulfill our production schedules.

Intellectual Property

Patents and other proprietary rights are important to the continued success of our business.  We also rely upon trade secrets, know-how, continuing technological innovation and licensing opportunities to develop and maintain our competitive position.  We protect our proprietary rights through a variety of methods, including confidentiality agreements and proprietary information agreements with suppliers, employees, consultants and others who may have access to proprietary information.  We own or control through licensing arrangements over 9,000 issued

11

patents and patent applications throughout the world that relate to aspects of the technology incorporated in many of our products.

Employees

As of December 31, 2019, we employed approximately 19,900 employees worldwide, including approximately 2,100 employees dedicated to research and development.  Approximately 9,500 employees are located within the U.S. and approximately 10,400 employees are located outside of the U.S., primarily throughout Europe and in Japan.  We have approximately 8,600 employees dedicated to manufacturing our products worldwide.  The Warsaw, Indiana production facilities employ approximately 3,100 employees in the aggregate. 

We have production employees represented by a labor union in Dover, Ohio and Bridgend, South Wales.  We have other employees in Europe who are represented by Works Councils.  We believe that our relationship with our employees is satisfactory.

INFORMATION ABOUT OUR EXECUTIVE OFFICERS

The following table sets forth certain information with respect to our executive officers as of February 14, 2020.

Name	Age	Position
Bryan Hanson	53	President and Chief Executive Officer
Didier Deltort	53	President, Europe, Middle East and Africa
Carrie Nichol	40	Vice President, Controller and Chief Accounting Officer
Chad Phipps	48	Senior Vice President, General Counsel and Secretary
Ivan Tornos	44	Group President, Global Businesses and Americas
Suketu Upadhyay	50	Executive Vice President and Chief Financial Officer
Sang Yi	57	President, Asia Pacific

Mr. Hanson was appointed President and Chief Executive Officer and a member of the Board of Directors in December 2017.  Previously, Mr. Hanson served as Executive Vice President and President, Minimally Invasive Therapies Group of Medtronic plc from January 2015 until joining Zimmer Biomet.  Prior to that, he was Senior Vice President and Group President, Covidien of Covidien plc from October 2014 to January 2015; Senior Vice President and Group President, Medical Devices and United States of Covidien from October 2013 to September 2014; Senior Vice President and Group President of Covidien for the Surgical Solutions business from July 2011 to October 2013; and President of Covidien’s Energy-based Devices business from July 2006 to June 2011.  Mr. Hanson held several other positions of increasing responsibility in sales, marketing and general management with Covidien from October 1992 to July 2006.

Mr. Deltort was appointed President, Europe, Middle East and Africa in August 2018.  He is responsible for the marketing, sales and distribution of products, services and solutions in the European, Middle Eastern and African (“EMEA”) regions.  Prior to joining Zimmer Biomet, Mr. Deltort served as Senior Vice President and General Manager, Global Healthcare Solutions and Partnerships of Boston Scientific Corporation, based in France from May 2016 until August 2018.  Before joining Boston Scientific Corporation, he spent 14 years with GE Healthcare in positions of increasing responsibility in Germany, Finland, Dubai and the United States, most recently serving as Global Senior Vice President and General Manager of the global Monitoring Solutions business as well as Managing Director of GE Healthcare Finland.  Prior to GE, Mr. Deltort served at Philips, Hewlett-Packard and Marquette Electronics in various international healthcare executive roles.

Ms. Nichol was appointed Vice President, Controller and Chief Accounting Officer in October 2019.  Prior to joining Zimmer Biomet, Ms. Nichol served as Senior Vice President, Controller and Chief Accounting Officer of Endo International plc (“Endo International”) from April 2018 to September 2019.  Ms. Nichol joined Endo International in March 2015 as Director of Consolidations and Financial Systems and was promoted to Assistant Controller in September 2015.  Prior to her tenure at Endo International, Ms. Nichol served as Senior Vice President and Controller of Haas Group Inc. (now part of Wesco Aircraft Holdings, Inc.), where she led the global accounting and finance teams from June 2011 until March 2015.  Prior to her employment with Haas Group Inc., Ms. Nichol was with IKON Office Solutions (now part of Ricoh Company, Ltd.) for a total of five years from June 2008 until June 2011 and from June 2003 until July 2005, having served most recently as the Director of Financial Reporting and Corporate Accounting with responsibility for all public filings and technical and corporate accounting.  From December 2005 until June 2008, Ms. Nichol was with Advanced Metallurgical Group NV serving as Assistant Controller.  Ms. Nichol began her career in public accounting with KPMG.

12

Mr. Phipps was appointed Senior Vice President, General Counsel and Secretary in May 2007.  He has global responsibility for the Company’s Legal Affairs and he serves as Secretary to the Board of Directors.  Mr. Phipps also oversees the Company’s Government Affairs activities.  Previously, Mr. Phipps served as Associate General Counsel and Corporate Secretary from December 2005 to May 2007.  He joined the Company in September 2003 as Associate Counsel and Assistant Secretary.  Prior to joining the Company, he served as Vice President and General Counsel of L&N Sales and Marketing, Inc. in Pennsylvania and he practiced law with the firm of Morgan, Lewis & Bockius in Philadelphia, focusing on corporate and securities law, mergers and acquisitions and financial transactions.

Mr. Tornos joined Zimmer Biomet in November 2018 as Group President, Orthopedics, and in December 2019 was appointed Group President, Global Businesses and Americas.  Prior to joining Zimmer Biomet, Mr. Tornos served as Worldwide President of the Global Urology, Medical and Critical Care Divisions of Becton, Dickinson and Company (“BD”) (and previously, C. R. Bard, Inc. (“Bard”)) from June 2017 until October 2018.  From June 2017 until BD’s acquisition of Bard in December 2017, Mr. Tornos also continued to serve as President, EMEA of Bard, a position to which he was appointed in September 2013.  Mr. Tornos joined Bard in August 2011 and, prior to his appointment as President, EMEA, served as Vice President and General Manager with leadership responsibility for Bard’s business in Southern Europe, Central Europe and the Emerging Markets Region of the Middle East and Africa.  Before joining Bard, Mr. Tornos served as Vice President and General Manager of the Americas Pharmaceutical and Medical/Imaging Segments of Covidien International from April 2009 to August 2011.  Before that, he served as International Vice President, Business Development and Strategy with Baxter International Inc. from July 2008 to April 2009 and, prior to that, Mr. Tornos spent 11 years with Johnson & Johnson in positions of increasing responsibility.

Mr. Upadhyay was appointed Executive Vice President and Chief Financial Officer in July 2019.  Prior to joining Zimmer Biomet, Mr. Upadhyay served as Senior Vice President, Global Financial Operations at Bristol-Myers Squibb from November 2016 until June 2019.  Before joining Bristol-Myers Squibb, he served as Executive Vice President and Chief Financial Officer of Endo International from September 2013 to November 2016.  Prior to his tenure at Endo International, Mr. Upadhyay served as Interim Chief Financial Officer as well as Senior Vice President of Finance, Corporate Controller and Principal Accounting Officer of BD.  Prior to his role as BD’s Interim Chief Financial Officer and Corporate Controller, Mr. Upadhyay was the Senior Vice President of Global Financial Planning and Analysis and also held the role of Vice President and Chief Financial Officer of BD’s international business.  Before joining BD in 2010, Mr. Upadhyay held a number of leadership roles across AstraZeneca and Johnson & Johnson.  Mr. Upadhyay spent the early part of his career in public accounting with KPMG.

Mr. Yi was appointed President, Asia Pacific in June 2015.  He is responsible for the sales, marketing and distribution of products, services and solutions in the Asia Pacific region.  Mr. Yi joined the Company in March 2013 as Senior Vice President, Asia Pacific.  Previously, he served as Vice President and General Manager of St. Jude Medical for Asia Pacific and Australia from 2005 to 2013.  Prior to that, Mr. Yi held several leadership positions over a ten-year period with Boston Scientific Corporation, ultimately serving as Vice President for North Asia.

AVAILABLE INFORMATION

Our Internet address is www.zimmerbiomet.com.  We routinely post important information for investors on our website in the “Investor Relations” section, which may be accessed from our homepage at www.zimmerbiomet.com or directly at https://investor.zimmerbiomet.com.  We use this website as a means of disclosing material, non-public information and for complying with our disclosure obligations under Regulation FD.  Accordingly, investors should monitor the Investor Relations section of our website, in addition to following our press releases, Securities and Exchange Commission (“SEC”) filings, public conference calls, presentations and webcasts.  Our goal is to maintain the Investor Relations website as a portal through which investors can easily find or navigate to pertinent information about us, free of charge, including:

• our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended (“Exchange Act”), as soon as reasonably practicable after we electronically file that material with or furnish it to the SEC;

• announcements of investor conferences and events at which our executives talk about our products and competitive strategies, as well as archives of these events;

13

• press releases on quarterly earnings, product announcements, legal developments and other material news that we may post from time to time;

• corporate governance information including our Corporate Governance Guidelines, Code of Business Conduct and Ethics, Code of Ethics for Chief Executive Officer and Senior Financial Officers, information concerning our Board of Directors and its committees, including the charters of the Audit Committee, Compensation and Management Development Committee, Corporate Governance Committee and Quality, Regulatory and Technology Committee, and other governance-related policies;

• stockholder services information, including ways to contact our transfer agent and information on how to sign up for direct deposit of dividends or enroll in our dividend reinvestment plan; and

• opportunities to sign up for email alerts and RSS feeds to have information provided in real time.

The information available on our website is not incorporated by reference in, or a part of, this or any other report we file with or furnish to the SEC.

Item 1A. Risk Factors  

We operate in a rapidly changing economic and technological environment that presents numerous risks, many of which are driven by factors that we cannot control or predict.  Our business, financial condition and results of operations may be impacted by a number of factors.  In addition to the factors discussed elsewhere in this report, the following risks and uncertainties could materially harm our business, financial condition or results of operations, including causing our actual results to differ materially from those projected in any forward-looking statements.  The following list of significant risk factors is not all-inclusive or necessarily in order of importance.  Additional risks and uncertainties not presently known to us, or that we currently deem immaterial, also may materially adversely affect us in future periods.  You should carefully consider these risks and uncertainties before investing in our securities.

If we fail to comply with the terms of the DPA that we entered into in January 2017, we may be subject to criminal prosecution and/or exclusion from federal healthcare programs.

On January 12, 2017, we resolved previously-disclosed FCPA matters involving Biomet and certain of its subsidiaries.  As part of the settlement, we entered into a DPA with the DOJ.  A copy of the DPA is incorporated by reference as an exhibit to this report.

If we do not comply with the terms of the DPA, we could be subject to prosecution for violating the internal controls provisions of the FCPA and the conduct of Biomet and its subsidiaries described in the DPA, which conduct pre-dated our acquisition of Biomet, as well as any new or continuing violations.  We could also be subject to exclusion by OIG-HHS from participation in federal healthcare programs, including Medicare, Medicaid and Veterans Administration health programs.  Any of these events could have a material adverse effect on our business, financial condition, results of operations and cash flows.

Our restructuring program may not be successful or we may not fully realize the expected cost savings and/or operating efficiencies from our restructuring initiatives.

In December 2019, our Board of Directors approved, and we initiated, a new global restructuring program that includes a restructuring of key businesses to better align our resources with our growth strategies, achieve operating efficiencies that we expect to reduce costs, simplify our organizational structure, accelerate decision-making and allow us to invest in higher priority growth opportunities.  Restructuring initiatives involve complex plans and actions that may include, or result in, workforce reductions, global plant closures and/or consolidations, product portfolio rationalizations and asset impairments.  Additionally, as a result of restructuring initiatives, we may experience a loss of continuity, loss of accumulated knowledge and/or inefficiencies during transitional periods.  Restructuring initiatives present significant risks that may impair our ability to achieve anticipated operating enhancements and/or cost reductions, or otherwise harm our business, including higher than anticipated costs in implementing our restructuring program, as well as management distraction. For more information on our restructuring program, see Note 4 to our consolidated financial statements.  If we fail to achieve some or all of the expected benefits of restructuring, it could have a material adverse effect on our competitive position, business, financial condition, results of operations and cash flows.

14

We may not be able to effectively integrate acquired businesses into our operations or achieve expected cost savings or profitability from our acquisitions.

Our acquisitions involve numerous risks, including:

• unforeseen difficulties in integrating personnel and sales forces, operations, manufacturing, logistics, research and development, information technology, communications, purchasing, accounting, marketing, administration and other systems and processes;

• difficulties harmonizing and optimizing quality systems and operations;

• diversion of financial and management resources from existing operations;

• unforeseen difficulties related to entering geographic regions where we do not have prior experience;

• potential loss of key employees;

• unforeseen risks and liabilities associated with businesses acquired, including any unknown vulnerabilities in acquired technology or compromises of acquired data; and

• inability to generate sufficient revenue or realize sufficient cost savings to offset acquisition or investment costs.

As a result, if we fail to evaluate and execute acquisitions properly, we might not achieve the anticipated benefits of such acquisitions, and we may incur costs in excess of what we anticipate.  These risks would likely be greater in the case of larger acquisitions.

Interruption of our manufacturing operations could adversely affect our business, financial condition and results of operations.

We have manufacturing sites all over the world.  In some instances, however, the manufacturing of certain of our product lines is concentrated in one or more of our plants.  Damage to one or more of our facilities from weather or natural disaster-related events, vulnerabilities in our technology, cyber-attacks against our information systems (such as ransomware attacks), or issues in our manufacturing arising from failure to follow specific internal protocols and procedures, compliance concerns relating to the QSR and Good Manufacturing Practice requirements, equipment breakdown or malfunction or other factors could adversely affect our ability to manufacture our products.  In the event of an interruption in manufacturing, we may be unable to move quickly to alternate means of producing affected products or to meet customer demand.  In the event of a significant interruption, for example, as a result of a failure to follow regulatory protocols and procedures, we may experience lengthy delays in resuming production of affected products due primarily to the need for regulatory approvals.  As a result, we may experience loss of market share, which we may be unable to recapture, and harm to our reputation, which could adversely affect our business, financial condition and results of operations.

Disruptions in the supply of the materials and components used in manufacturing our products or the sterilization of our products by third-party suppliers could adversely affect our business, financial condition and results of operations. 

We purchase many of the materials and components used in manufacturing our products from third-party suppliers and we outsource some key manufacturing activities.  Certain of these materials and components and outsourced activities can only be obtained from a single source or a limited number of sources due to quality considerations, expertise, costs or constraints resulting from regulatory requirements.  In certain cases, we may not be able to establish additional or replacement suppliers for such materials or components or outsourced activities in a timely or cost effective manner, largely as a result of FDA regulations that require validation of materials and components prior to their use in our products and the complex nature of our and many of our suppliers' manufacturing processes.  A reduction or interruption in the supply of materials or components used in manufacturing our products; an inability to timely develop and validate alternative sources if required; or a significant increase in the price of such materials or components could adversely affect our business, financial condition and results of operations.

In addition, many of our products require sterilization prior to sale and we utilize a mix of internal resources and contract sterilizers to perform this service.  To the extent we or our contract sterilizers are unable to sterilize our products, whether due to capacity, availability of materials for sterilization, regulatory or other constraints, including federal and state regulations on the use of ethylene oxide, we may be unable to transition to other contract sterilizers,

15

sterilizer locations or sterilization methods in a timely or cost effective manner or at all, which could have a material impact on our results of operations and financial condition.

Moreover, we are subject to the SEC’s rule regarding disclosure of the use of certain minerals, known as “conflict minerals” (tantalum, tin and tungsten (or their ores) and gold), which are mined from the Democratic Republic of the Congo and adjoining countries.  This rule could adversely affect the sourcing, availability and pricing of materials used in the manufacture of our products, which could adversely affect our manufacturing operations and our profitability.  In addition, we are incurring additional costs to comply with this rule, including costs related to determining the source of any relevant minerals and metals used in our products.  We have a complex supply chain and we may not be able to sufficiently verify the origins of the minerals and metals used in our products through our due diligence procedures.  As a result, we may face reputational challenges with our customers and other stakeholders.

We are subject to costly and complex laws and governmental regulations relating to the development, design, product standards, packaging, advertising, promotion, postmarket surveillance, manufacturing, labeling and marketing of our products, non-compliance with which could adversely affect our business, financial condition and results of operations.

Our global regulatory environment is increasingly stringent, unpredictable and complex. The products we design, develop, manufacture and market are subject to rigorous regulation by the FDA and numerous other supranational, national, federal, regional, state and local governmental authorities.  The process of obtaining regulatory approvals and clearances to market these products can be costly and time consuming and approvals might not be granted for future products on a timely basis, if at all.  Delays in receipt of, or failure to obtain, approvals for future products could result in delayed realization of product revenues or in substantial additional costs.

Both before and after a product is commercially released, we have ongoing responsibilities under FDA regulations and other supranational, national, federal, regional, state and local requirements globally.  Compliance with these requirements, including the QSR, recordkeeping regulations, labeling and promotional requirements and adverse event reporting regulations, is subject to continual review and is monitored rigorously through periodic inspections by the FDA and other regulators, which may result in observations (such as on Form 483), and in some cases warning letters, that require corrective action, or other forms of enforcement.  If the FDA or another regulator were to conclude that we are not in compliance with applicable laws or regulations, or that any of our products are ineffective or pose an unreasonable health risk, they could ban such products, detain or seize adulterated or misbranded products, order a recall, repair, replacement, or refund of payment of such products, refuse to grant pending premarket approval applications, refuse to provide certificates for exports, and/or require us to notify healthcare professionals and others that the products present unreasonable risks of substantial harm to the public health.  The FDA or other regulators may also impose operating restrictions, including a ceasing of operations at one or more facilities, enjoin and restrain certain violations of applicable law pertaining to our products, seizure of products and assess civil or criminal penalties against our officers, employees or us.  The FDA or other regulators could also issue a corporate warning letter or a recidivist warning letter or negotiate the entry of a consent decree of permanent injunction with us, and/or recommend prosecution.  Any adverse regulatory action, depending on its magnitude, may restrict us from effectively manufacturing, marketing and selling our products and could have a material adverse effect on our business, financial condition and results of operations.

In 2012, we received a warning letter from the FDA citing concerns relating to certain processes pertaining to products manufactured at our Ponce, Puerto Rico manufacturing facility.  In August 2018, we received a warning letter from the FDA related to observed non-conformities with current good manufacturing practice requirements of the QSR at our Warsaw North Campus manufacturing facility.  As of February 14, 2020, these warning letters remained pending.  Until the violations are corrected, we may become subject to additional regulatory action by the FDA as described above, the FDA may refuse to grant premarket approval applications and/or the FDA may refuse to grant export certificates, any of which could have a material adverse effect on our business, financial condition and results of operations.  Additional information regarding these and other FDA regulatory matters can be found in Note 20 to our consolidated financial statements.

Governmental regulations outside the U.S. continue to become increasingly stringent and complex.  In the EU, for example, the MDR will become effective in May 2020 and will include significant additional premarket and post-market requirements.  Complying with the requirements of this regulation requires us to incur significant expense.  Additionally, the availability of EU notified body services certified to the new requirements is limited, which may delay the marketing approval for some of our products under the MDR.  Any such delays, or any failure to meet the

16

requirements of the new regulation, could adversely impact our business in the EU and other regions that tie their product registrations to the EU requirements.

Our products and operations are also often subject to the rules of industrial standards bodies, such as the International Standards Organization.  If we fail to adequately address any of these regulations, our business could be harmed.

If we fail to comply with healthcare fraud and abuse or data privacy and security laws and regulations, we could face substantial penalties and our business, operations and financial condition could be adversely affected.

The sales, marketing and pricing of products and relationships that medical products companies have with healthcare providers are under increased scrutiny around the world.  Our industry is subject to various laws and regulations pertaining to healthcare fraud and abuse, including the False Claims Act, the Anti-Kickback Statute, the Stark law, the Physician Payments Sunshine Act, the Food, Drug, and Cosmetic Act and similar laws and regulations in the U.S. and around the world.  In addition, we are subject to various laws concerning anti-corruption and anti-bribery matters (including the FCPA), sales to countries or persons subject to economic sanctions and other matters affecting our international operations.  Violations of these laws are punishable by criminal and/or civil sanctions, including, in some instances, fines, imprisonment and, within the U.S., exclusion from participation in government healthcare programs, including Medicare, Medicaid and Veterans Administration health programs.  These laws are administered by, among others, the DOJ, the OIG-HHS, the SEC, the OFAC, the Bureau of Industry and Security of the U.S. Department of Commerce and state attorneys general.

We are also subject to federal, state and international data privacy and security laws and regulations that govern the collection, use, disclosure, transfer, storage, disposal and protection of health-related and other personal information.  The FDA has issued guidance to which we may be subject concerning data security for medical devices.  The FDA and the DHS have also issued urgent safety communications regarding cybersecurity vulnerabilities of certain medical devices, which vulnerabilities may apply to some of our current or future devices.  

In addition, certain of our affiliates are subject to privacy, security and breach notification regulations promulgated under HIPAA.  HIPAA governs the use, disclosure, and security of protected health information by HIPAA “covered entities” and their “business associates.”  Covered entities are health plans, health care clearinghouses and health care providers that engage in specific types of electronic transactions.  A business associate is any person or entity (other than members of a covered entity’s workforce) that performs a service on behalf of a covered entity involving the use or disclosure of protected health information.  HHS (through the Office for Civil Rights) has direct enforcement authority against covered entities and business associates with regard to compliance with HIPAA regulations.  On December 12, 2018, the Office for Civil Rights of HHS issued a request for information seeking input from the public on how the HIPAA regulations could be modified to amend existing obligations relating to the processing of protected health information.  We will monitor this process and assess the impact of changes to the HIPAA regulations to our business.

In addition to the FDA guidance and HIPAA regulations described above, a number of U.S. states have also enacted data privacy and security laws and regulations that govern the collection, use, disclosure, transfer, storage, disposal, and protection of personal information, such as social security numbers, medical and financial information and other information.  These laws and regulations may be more restrictive and not preempted by U.S. federal laws.  For example, several U.S. territories and all 50 states now have data breach laws that require timely notification to individuals, and at times regulators, the media or credit reporting agencies, if a company has experienced the unauthorized access or acquisition of personal information.  Other state laws include the CCPA, which was signed into law on June 28, 2018 and largely took effect on January 1, 2020.  The CCPA, among other things, contains new disclosure obligations for businesses that collect personal information about California residents and affords those individuals numerous rights relating to their personal information that may affect our ability to use personal information or share it with our business partners.  Regulations from the California Attorney General have not been finalized, and it is expected that additional amendments to the CCPA will be introduced.  Meanwhile, over fifteen other states have considered privacy laws like the CCPA, and in October 2019, Nevada enacted a similar but generally less restrictive privacy law.  We will continue to monitor and assess the impact of these state laws, which may impose substantial penalties for violations, impose significant costs for investigations and compliance, allow private class-action litigation and carry significant potential liability for our business.  

Outside of the U.S., data protection laws, including the GDPR and LGPD, also apply to some of our operations in the countries in which we provide services to our customers.  Legal requirements in these countries relating to the collection, storage, processing and transfer of personal data continue to evolve.  The GDPR imposes, among other

17

things, data protection requirements that include strict obligations and restrictions on the ability to collect, analyze and transfer EU personal data, a requirement for prompt notice of data breaches to data subjects and supervisory authorities in certain circumstances, and possible substantial fines for any violations (including possible fines for certain violations of up to the greater of 20 million Euros or 4% of total worldwide annual turnover of the preceding financial year).  Governmental authorities around the world have enacted similar types of legislative and regulatory requirements concerning data protection, and additional governments are considering similar legal frameworks.

The interpretation and enforcement of the laws and regulations described above are uncertain and subject to change, and may require substantial costs to monitor and implement compliance with any additional requirements.  Failure to comply with U.S. and international data protection laws and regulations could result in government enforcement actions (which could include substantial civil and/or criminal penalties), private litigation and/or adverse publicity and could have a material adverse impact on our business, financial condition or results of operations.

We incurred substantial additional indebtedness in connection with previous mergers and acquisitions and may not be able to meet all of our debt obligations, and the phase-out, replacement or unavailability of LIBOR and/or other interest rate benchmarks could adversely affect our indebtedness.

We incurred substantial additional indebtedness in connection with previous mergers and acquisitions.  At December 31, 2019, our total indebtedness was $8.2 billion, as compared to $1.4 billion at December 31, 2014.  As of December 31, 2019, our debt service obligations, comprised of principal and interest (excluding leases and equipment notes), during the next 12 months are expected to be $1.7 billion.  As a result of the increase in our debt, demands on our cash resources have increased.  The increased level of debt could, among other things:

• require us to dedicate a large portion of our cash flow from operations to the servicing and repayment of our debt, thereby reducing funds available for working capital, capital expenditures, research and development expenditures and other general corporate requirements;

• limit our ability to obtain additional financing to fund future working capital, capital expenditures, research and development expenditures and other general corporate requirements;

• limit our flexibility in planning for, or reacting to, changes in our business and the industry in which we operate;

• restrict our ability to make strategic acquisitions or dispositions or to exploit business opportunities;

• place us at a competitive disadvantage compared to our competitors that have less debt;

• adversely affect our credit rating, with the result that the cost of servicing our indebtedness might increase and our ability to obtain surety bonds could be impaired;

• adversely affect the market price of our common stock; and

• limit our ability to apply proceeds from a future offering or asset sale to purposes other than the servicing and repayment of debt.

In addition, the interest rates applicable to certain of our debt obligations are based on a fluctuating rate of interest determined by reference to the London Interbank Offered Rate (“LIBOR”), Euro Interbank Offered Rate (“EURIBOR”) and/or Tokyo Interbank Offered Rate (“TIBOR”).  Any increase in interest rates applicable to our debt obligations would increase our cost of borrowing and could adversely affect our financial position, results of operations or cash flows.  Further, in July 2017, the U.K.’s Financial Conduct Authority, which regulates LIBOR, announced that it intends to stop persuading or compelling banks to submit rates for the calculation of LIBOR after 2021.  In response to concerns regarding the future of LIBOR, the Board of Governors of the Federal Reserve System and the Federal Reserve Bank of New York convened the Alternative Reference Rates Committee (“ARRC”) to identify alternatives to LIBOR.  The ARRC has recommended a benchmark replacement waterfall to assist issuers in continued capital market entry while safeguarding against LIBOR’s discontinuation.  The initial steps in the ARRC’s recommended provision reference variations of the Secured Overnight Financing Rate (“SOFR”).  At this time, it is not possible to predict whether SOFR will attain market traction as a LIBOR replacement.  Additionally, it is uncertain if LIBOR will cease to exist after calendar year 2021, or whether additional reforms to LIBOR may be enacted, or whether alternative reference rates will gain market acceptance as a replacement for LIBOR.  Further, other central banks have convened working groups to determine replacements or reforms of other interest rate benchmarks, such as EURIBOR, and it is expected, although not known, that a transition away from the use of certain of these other interest rate benchmarks will occur over the course of the next few years and alternative reference rates will be established.

18

Certain of our debt obligations that are based on LIBOR will mature before the end of 2021.  However, the revolving credit agreement that we entered into on November 1, 2019 (the “2019 Credit Agreement”) has an initial maturity date of November 1, 2024.  In anticipation of LIBOR’s phase out, the 2019 Credit Agreement provides for alternative base rates as well as a transition mechanism for selecting a benchmark replacement rate for LIBOR, with such benchmark replacement rate to be mutually agreed with the general administrative agent and our lenders.  There can be no assurance that we will be able to reach an agreement with our lenders on any such replacement benchmark before experiencing adverse effects due to changes in interest rates, if at all.  We will continue to monitor the situation and address the potential reference rate changes in future debt obligations that we may incur.  Accordingly, the potential effect of the phase-out, replacement or unavailability of LIBOR, or the unavailability of any other interest rate benchmark such as EURIBOR or TIBOR, on our cost of capital cannot yet be determined.  Further, the use of an alternative base rate or a benchmark replacement rate as a basis for calculating interest with respect to any outstanding variable rate indebtedness could lead to an increase in the interest we pay and a corresponding increase in our costs of capital or otherwise have a material adverse impact on our business, financial condition or results of operations.

We are increasingly dependent on sophisticated information technology and if we fail to effectively maintain or protect our information systems or data, including from data breaches, our business could be adversely affected.

We are increasingly dependent on sophisticated information technology for our products and infrastructure.  As a result of technology initiatives, recently enacted regulations, changes in our system platforms and integration of new business acquisitions, we have been consolidating and integrating the number of systems we operate and have upgraded and expanded our information systems capabilities.  In addition, some of our products and services incorporate software or information technology that collects data regarding patients and patient therapy, and some products or software we provide to customers connect to our systems for maintenance and other purposes.  We also have outsourced elements of our operations to third parties, and, as a result, we manage a number of third-party suppliers who may or could have access to our confidential information, including, but not limited to, intellectual property, proprietary business information and personal information of patients, employees and customers (collectively “Confidential Information”).  

Our information systems, and those of third-party suppliers with whom we contract, require an ongoing commitment of significant resources to maintain, protect and enhance existing systems and develop new systems to keep pace with continuing changes in information technology, evolving systems and regulatory standards and the increasing need to protect patient and customer information.  In addition, given their size and complexity, these systems could be vulnerable to service interruptions or to security breaches from inadvertent or intentional actions by our employees, third-party suppliers and/or business partners, or from cyber-attacks by malicious third parties attempting to gain unauthorized access to our products, systems or Confidential Information.  

Like other large multi-national corporations, we have experienced instances of successful phishing attacks on our email systems and expect to be subject to similar attacks in the future. We also are subject to other cyber-attacks, including state-sponsored cyber-attacks, industrial espionage, insider threats, computer denial-of-service attacks, computer viruses, ransomware and other malware, payment fraud or other cyber incidents.  Our incident response efforts, business continuity procedures and disaster recovery planning may not be sufficient for all eventualities.  If we fail to maintain or protect our information systems and data integrity effectively, we could:

• lose existing customers;

• have difficulty attracting new customers;

• have problems in determining product cost estimates and establishing appropriate pricing;

• suffer outages or disruptions in our operations or supply chain;

• have difficulty preventing, detecting, and controlling fraud;

• have disputes with customers, physicians, and other healthcare professionals;  

• have regulatory sanctions or penalties imposed;

• incur increased operating expenses;

• be subject to issues with product functionality that may result in a loss of data, risk to patient safety, field actions and/or product recalls;

• incur expenses or lose revenues as a result of a data privacy breach; or

19

• suffer other adverse consequences.

While we have invested heavily in the protection of our data and information technology, there can be no assurance that our activities related to consolidating the number of systems we operate, upgrading and expanding our information systems capabilities, protecting and enhancing our systems and implementing new systems will be successful.  We will continue to dedicate significant resources to protect against unauthorized access to our systems and work with government authorities to detect and reduce the risk of future cyber incidents; however, cyber-attacks are becoming more sophisticated, frequent and adaptive. Therefore, despite our efforts, we cannot assure that cyber-attacks or data breaches will not occur or that systems issues will not arise in the future.  Any significant breakdown, intrusion, breach, interruption, corruption or destruction of these systems could have a material adverse effect on our business and reputation.

Our success depends on our ability to effectively develop and market our products against those of our competitors.

We operate in a highly competitive environment.  Our present or future products could be rendered obsolete or uneconomical by technological advances by one or more of our present or future competitors or by other therapies, including biological therapies.  To remain competitive, we must continue to develop and acquire new products and technologies and improve existing products and technologies.  Competition is primarily on the basis of:

• technology;

• innovation;

• quality;

• reputation;

• customer service; and

• pricing.

In markets outside of the U.S., other factors influence competition as well, including:

• local distribution systems;

• complex regulatory environments; and

• differing medical philosophies and product preferences.

Our competitors may:

• have greater financial, marketing and other resources than us;

• respond more quickly to new or emerging technologies;

• undertake more extensive marketing campaigns;

• adopt more aggressive pricing policies; or

• be more successful in attracting potential customers, employees and strategic partners.

Any of these factors, alone or in combination, could cause us to have difficulty maintaining or increasing sales of our products.

If we fail to retain the independent agents and distributors upon whom we rely heavily to market our products, customers may not buy our products and our revenue and profitability may decline.

Our marketing success in the U.S. and abroad depends significantly upon our agents’ and distributors’ sales and service expertise in the marketplace.  Many of these agents have developed professional relationships with existing and potential customers because of the agents’ detailed knowledge of products and instruments.  A loss of a significant number of our agents could have a material adverse effect on our business and results of operations.

20

If we do not introduce new products in a timely manner, our products may become obsolete over time, customers may not buy our products and our revenue and profitability may decline

Demand for our products may change, in certain cases, in ways we may not anticipate because of:

• evolving customer needs;

• changing demographics;

• slowing industry growth rates;

• declines in the musculoskeletal implant market;

• the introduction of new products and technologies;

• evolving surgical philosophies; and

• evolving industry standards.

Without the timely introduction of new products and enhancements, our products may become obsolete over time.  If that happens, our revenue and operating results would suffer.  The success of our new product offerings will depend on several factors, including our ability to:

• properly identify and anticipate customer needs;

• commercialize new products in a timely manner;

• manufacture and deliver instruments and products in sufficient volumes on time;

• differentiate our offerings from competitors’ offerings; 

• achieve positive clinical outcomes for new products; 

• satisfy the increased demands by healthcare payors, providers and patients for shorter hospital stays, faster post-operative recovery and lower-cost procedures;

• innovate and develop new materials, product designs and surgical techniques; and

• provide adequate medical education relating to new products.

In addition, new materials, product designs and surgical techniques that we develop may not be accepted quickly, in some or all markets, because of, among other factors:

• entrenched patterns of clinical practice;

• the need for regulatory clearance; and

• uncertainty with respect to third-party reimbursement.

Moreover, innovations generally require a substantial investment in research and development before we can determine their commercial viability and we may not have the financial resources necessary to fund the production.  In addition, even if we are able to successfully develop enhancements or new generations of our products, these enhancements or new generations of products may not produce revenue in excess of the costs of development and they may be quickly rendered obsolete by changing customer preferences or the introduction by our competitors of products embodying new technologies or features.

If third-party payors decline to reimburse our customers for our products or reduce reimbursement levels, the demand for our products may decline and our ability to sell our products profitably may be harmed.

We sell our products and services to hospitals, doctors, dentists and other healthcare providers, all of which receive reimbursement for the healthcare services provided to their patients from third-party payors, such as domestic and international government programs, private insurance plans and managed care programs.  These third-party payors may deny reimbursement if they determine that a product or service used in a procedure was not in accordance with cost-effective treatment methods, as determined by the third-party payor, or was used for an unapproved indication.  Third-party payors may also decline to reimburse for experimental procedures and products.

21

In addition, third-party payors are increasingly attempting to contain healthcare costs by limiting both coverage and the level of reimbursement for medical products and services.  If third-party payors reduce reimbursement levels to hospitals and other healthcare providers for our products, demand for our products may decline, or we may experience increased pressure to reduce the prices of our products, which could have a material adverse effect on our sales and results of operations.

We have also experienced downward pressure on product pricing and other effects of healthcare reform in our international markets.  If key participants in government healthcare systems reduce the reimbursement levels for our products, our sales and results of operations may be adversely affected.

The ongoing cost-containment efforts of healthcare purchasing organizations may have a material adverse effect on our results of operations.

Many customers for our products have formed group purchasing organizations in an effort to contain costs.  Group purchasing organizations negotiate pricing arrangements with medical supply manufacturers and distributors, and these negotiated prices are made available to a group purchasing organization’s affiliated hospitals and other members.  If we are not one of the providers selected by a group purchasing organization, affiliated hospitals and other members may be less likely to purchase our products, and, if the group purchasing organization has negotiated a strict compliance contract for another manufacturer’s products, we may be precluded from making sales to members of the group purchasing organization for the duration of the contractual arrangement.  Our failure to respond to the cost-containment efforts of group purchasing organizations may cause us to lose market share to our competitors and could have a material adverse effect on our sales and results of operations.

We conduct a significant amount of our sales activity outside of the U.S., which subjects us to additional business risks and may cause our profitability to decline due to increased costs.

We sell our products in more than 100 countries and derived approximately 40 percent of our net sales in 2019 from outside the U.S.  We intend to continue to pursue growth opportunities in sales internationally, including in emerging markets, which could expose us to additional risks associated with international sales and operations.  Our international operations are, and will continue to be, subject to a number of risks and potential costs, including:

• changes in foreign medical reimbursement policies and programs;

• changes in foreign regulatory requirements, such as more stringent requirements for regulatory clearance of products;

• differing local product preferences and product requirements;

• fluctuations in foreign currency exchange rates;

• diminished protection of intellectual property in some countries outside of the U.S.;

• trade protection measures, import or export requirements, new or increased tariffs, trade embargoes and sanctions and other trade barriers, which may prevent us from shipping products to a particular market and may increase our operating costs;

• foreign exchange controls that might prevent us from repatriating cash earned in countries outside the U.S.;

• complex data privacy requirements and labor relations laws;

• extraterritorial effects of U.S. laws such as the FCPA;

• effects of foreign anti-corruption laws, such as the UK Bribery Act;

• difficulty in staffing and managing foreign operations;

• labor force instability;

• potentially negative consequences from changes in tax laws; and

• political, social and economic instability and uncertainty, including sovereign debt issues.

Violations of foreign laws or regulations could result in fines, criminal sanctions against us, our officers or our employees, prohibitions on the conduct of our business and damage to our reputation.

22

We have significant global sales and operations and face risks related to health epidemics that could impact our sales and operating results.

Our business could be adversely affected by the effects of a widespread outbreak of contagious disease, including the recent outbreak of respiratory illness caused by a novel coronavirus first identified in Wuhan, Hubei Province, China.  Any outbreak of contagious diseases, and other adverse public health developments, could have a material adverse effect on our business operations.  These could include disruptions or restrictions on our ability to travel or to distribute our products, as well as temporary closures of our facilities or the facilities of our suppliers or customers, the deferral of elective procedures in impacted countries or the temporary suspension of operations by us or our suppliers or customers.  Any disruption of our operations, or those of our suppliers or customers, would likely impact our sales and operating results.  In addition, a significant outbreak of contagious diseases in the human population could result in a widespread health crisis that could adversely affect the economies and financial markets of many countries, resulting in an economic downturn that could affect demand for our products and likely impact our operating results.

We may have additional tax liabilities.

We are subject to income taxes in the U.S. and many foreign jurisdictions.  Significant judgment is required in determining our worldwide provision for income taxes.  In the ordinary course of our business, there are many transactions and calculations where the ultimate tax determination is uncertain.  We are regularly under audit by tax authorities.  Although we believe our tax estimates are reasonable, the final determination of tax audits and any related litigation could be materially different from our historical income tax provisions and accruals.  The results of an audit or litigation could have a material effect on our financial statements in the period or periods for which that determination is made.

The Tax Cuts and Jobs Act of 2017 was signed into law on December 22, 2017 (the “2017 Tax Act”), with significant changes to the U.S. corporate income tax system, including a federal corporate income tax rate reduction from 35 percent to 21 percent, limitations on the deductibility of interest expense, and the transition of U.S. international taxation from a worldwide tax system to a territorial tax system.  Our tax expense and cash flow could be impacted in the event of adverse future regulatory guidance provided by the U.S. Treasury clarifying certain aspects of the 2017 Tax Act or other changes to the U.S. corporate income tax system.

Other changes in the tax laws of the jurisdictions where we do business, including an increase in tax rates or an adverse change in the treatment of an item of income or expense, could result in a material increase in our tax expense.  For example, changes in the tax laws of foreign jurisdictions could arise as a result of the “base erosion and profit shifting” project undertaken by the Organisation for Economic Co-operation and Development (“OECD”).  The OECD, which represents a coalition of member countries, has recommended changes to numerous long-standing tax principles.  These changes, as adopted by countries, could increase tax uncertainty and may adversely affect our provision for income taxes.

We are subject to risks arising from currency exchange rate fluctuations, which can increase our costs, cause our profitability to decline and expose us to counterparty risks.

A substantial portion of our foreign revenues is generated in Europe and Japan.  The U.S. Dollar value of our foreign-generated revenues varies with currency exchange rate fluctuations.  Significant increases in the value of the U.S. Dollar relative to the Euro, the Japanese Yen, the Swiss Franc or other currencies could have a material adverse effect on our results of operations.  Although we address currency risk management through regular operating and financing activities, and, on a limited basis, through the use of derivative financial instruments, those actions may not prove to be fully effective or may create additional financial obligations for us.  Further, if the counterparties to the derivative financial instrument transactions fail to honor their obligations due to financial distress or otherwise, we would be exposed to potential losses or the inability to recover anticipated gains from those transactions.

Pending and future product liability claims and litigation could adversely impact our financial condition and results of operations and impair our reputation.

Our business exposes us to potential product liability risks that are inherent in the design, manufacture and marketing of medical devices.  In the ordinary course of business, we are the subject of product liability lawsuits alleging that component failures, manufacturing flaws, design defects or inadequate disclosure of product-related risks or product-related information resulted in an unsafe condition or injury to patients.  As discussed further in

23

Note 20 to our consolidated financial statements, we are defending product liability lawsuits relating to the Durom^® Acetabular Component (“Durom Cup”), certain products within the M/L Taper and M/L Taper with Kinectiv^® Technology hip stems and Versys^® Femoral Head implants, and the M2a-Magnum^TM hip system.  We are also currently defending a number of other product liability lawsuits and claims related to various other products.  Any product liability claim brought against us, with or without merit, can be costly to defend.  Product liability lawsuits and claims, safety alerts or product recalls, regardless of their ultimate outcome, could have a material adverse effect on our business and reputation and on our ability to attract and retain customers.

We are substantially dependent on patent and other proprietary rights, and failing to protect such rights or to be successful in litigation related to our rights or the rights of others may result in our payment of significant monetary damages and/or royalty payments, negatively impact our ability to sell current or future products, or prohibit us from enforcing our patent and other proprietary rights against others.

Claims of intellectual property infringement and litigation regarding patent and other intellectual property rights are commonplace in our industry and are frequently time consuming and costly.  At any given time, we may be involved as either plaintiff or defendant in a number of patent infringement actions, the outcomes of which may not be known for prolonged periods of time.  While it is not possible to predict the outcome of patent and other intellectual property litigation, such litigation could result in our payment of significant monetary damages and/or royalty payments, negatively impact our ability to sell current or future products, or prohibit us from enforcing our patent and proprietary rights against others, which could have a material adverse effect on our business and results of operations.  As discussed further in Note 20 to our consolidated financial statements, in 2015 we paid a compensatory damages award of approximately $90 million and in March 2019 we paid approximately $168 million related to an award of treble damages and attorneys’ fees in a patent infringement lawsuit.

Our success depends in part on our proprietary technology, processes, methodologies and information.  We rely on a combination of patent, copyright, trademark, trade secret and other intellectual property laws and nondisclosure, license, assignment and confidentiality arrangements to establish, maintain and protect our proprietary rights, as well as the intellectual property rights of third parties whose assets we license.  However, the steps we have taken to protect our intellectual property rights, and the rights of those from whom we license intellectual property, may not be adequate to prevent unauthorized use, misappropriation or theft of our intellectual property.  Further, our currently pending or future patent applications may not result in patents being issued to us, patents issued to or licensed by us in the past or in the future may be challenged or circumvented by competitors, and such patents may be found invalid, unenforceable or insufficiently broad to protect our technology or to provide us with any competitive advantage.  Third parties could obtain patents that may require us to negotiate licenses to conduct our business, and the required licenses may not be available on reasonable terms or at all.  We also cannot be certain that others will not independently develop substantially equivalent proprietary information.  

In addition, intellectual property laws differ in various jurisdictions in which we operate and are subject to change at any time, which could further restrict our ability to protect our intellectual property and proprietary rights.  In particular, a portion of our revenues is derived from jurisdictions where adequately protecting intellectual property rights may prove more challenging or impossible.  We may also not be able to detect unauthorized uses or take timely and effective steps to remedy unauthorized conduct.  To prevent or respond to unauthorized uses of our intellectual property, we might be required to engage in costly and time-consuming litigation or other proceedings and we may not ultimately prevail.  Any failure to establish, maintain or protect our intellectual property or proprietary rights could have a material adverse effect on our business, financial condition, or results of operations.

We are involved in legal proceedings that may result in adverse outcomes.

In addition to intellectual property and product liability claims and lawsuits, we are involved in various commercial and securities litigation and claims and other legal proceedings that arise from time to time in the ordinary course of our business.  For example, as discussed further in Note 20 to our consolidated financial statements, we are defending a purported class action lawsuit, Shah v. Zimmer Biomet Holdings, Inc. et al., filed against us, certain of our current and former officers, certain current and former members of our Board of Directors, and certain former stockholders of ours who sold shares of our common stock in secondary public offerings in 2016, alleging that we and other defendants violated federal securities laws by making materially false and/or misleading statements and/or omissions about our compliance with FDA regulations and our ability to continue to accelerate our organic revenue growth rate in the second half of 2016.  There have also been four shareholder derivative actions filed purportedly on our behalf against certain of our current and former directors and officers and certain former stockholders of ours who sold shares of our common stock in secondary public offerings in 2016, alleging breaches of fiduciary duties

24

and insider trading, based on substantially the same factual allegations as Shah.  Although we believe there are substantial defenses in these matters, litigation and other claims are subject to inherent uncertainties and management’s view of these matters may change in the future.  Given the uncertain nature of legal proceedings generally, we are not able in all cases to estimate the amount or range of loss that could result from an unfavorable outcome.  We could in the future incur judgments or enter into settlements of claims that could have a material adverse effect on our results of operations in any particular period.

Future material impairments in the carrying value of our intangible assets, including goodwill, would negatively affect our operating results.

Goodwill and intangible assets represent a significant portion of our assets.  At December 31, 2019, we had $9.6 billion in goodwill and $7.3 billion of intangible assets.  The goodwill results from our acquisition activity and represents the excess of the consideration transferred over the fair value of the net assets acquired.  We assess at least annually whether events or changes in circumstances indicate that the carrying value of our intangible assets may not be recoverable.  As discussed further in Note 10 to our consolidated financial statements, we recorded goodwill impairment charges of $975.9 million in 2018.  If the operating performance at one or more of our reporting units falls significantly below current levels, if competing or alternative technologies emerge, if market conditions or future cash flow estimates for one or more of our businesses decline, or as a result of restructuring initiatives pursuant to which we reorganize our reporting units, we could be required to record additional goodwill impairment charges.  Any write-off of a material portion of our goodwill or unamortized intangible assets would negatively affect our results of operations.

Developments relating to the UK’s exit from the EU could adversely affect us.

The UK held a referendum in June 2016 in which voters chose to leave the EU, commonly referred to as “Brexit”.  Following a protracted period of negotiation, the UK ceased to be a member of the EU on January 31, 2020, after the ratification and approval of a withdrawal agreement by the EU and the UK.  The withdrawal agreement provides for a transition period until December 31, 2020 (the “Transition Period”), during which the terms of the future trading relationship between the EU and the UK will be negotiated.  Throughout the Transition Period, the legal and regulatory framework as between the UK and the EU will remain the same.

Brexit and the perceptions as to its potential impact have and may continue to adversely affect business activity and economic conditions in Europe and globally and could contribute to instability in global financial and foreign exchange markets both during and after the Transition Period.  Brexit could also have the effect of disrupting the free movement of goods, services and people between the UK and the EU through the imposition of tariffs, custom inspections, and/or migration restrictions.  The future relationship for medical products regulation and trade between the UK and the EU is currently uncertain and any adjustments we make to our business and operations as a result of Brexit could result in significant expense and take significant time to complete.  Brexit could also result in the UK or the EU significantly altering its regulations affecting the clearance and approval of medical products.  In addition, as a result of Brexit, other European countries may seek to conduct referenda with respect to their continuing membership with the EU.  If there is no agreed upon long-term trading arrangement by the end of the Transition Period (a so-called “hard Brexit”), it would likely have a significant adverse impact on labor and trade and create significant short-term currency volatility.  

Given these possibilities and others we may not anticipate, as well as the lack of comparable precedent, the full extent to which we will be affected by Brexit is uncertain.  Any of the potential negative effects of Brexit could adversely affect our business, results of operations and financial condition.

Anti-takeover provisions in our organizational documents could delay or prevent a change of control.

Certain provisions of our Restated Certificate of Incorporation, our Restated By-Laws and the Delaware General Corporation Law may have an anti-takeover effect and may delay, defer or prevent a merger, acquisition, tender offer, takeover attempt or other change of control transaction that a stockholder might consider in its best interest, including those attempts that might result in a premium over the market price for the shares held by our stockholders.

25

These provisions provide for, among other things:

• the ability of our board of directors to issue one or more series of preferred stock without further stockholder action;

• advance notice for nominations of directors by stockholders and for stockholders to include matters to be considered at our annual meetings;

• certain limitations on convening special stockholder meetings; and

• the prohibition on engaging in a “business combination” with an “interested stockholder” for three years after the time at which a person became an interested stockholder unless certain conditions are met, as set forth in Section 203 of the Delaware General Corporation Law.

These anti-takeover provisions could make it more difficult for a third party to acquire us, even if the third party’s offer may be considered beneficial by many of our stockholders.  As a result, our stockholders may be limited in their ability to obtain a premium for their shares.

Our Restated By-Laws designate certain Delaware courts as the sole and exclusive forum for certain types of actions and proceedings that may be initiated by our stockholders, which could limit our stockholders’ ability to obtain a favorable judicial forum for disputes with us or our directors, officers or other employees.

Our Restated By-Laws provide that, unless we consent in writing to the selection of an alternative forum, a state court located within the State of Delaware (or, if no state court located in the State of Delaware has jurisdiction, the federal district court for the District of Delaware) will be the sole and exclusive forum for any stockholder (including any beneficial owner) to bring (i) any derivative action or proceeding brought on our behalf, (ii) any action asserting a claim of breach of fiduciary duty owed by any of our directors, officers or other employees to us or our stockholders, (iii) any action asserting a claim against us or any of our directors, officers or other employees arising pursuant to any provision of the Delaware General Corporation Law or our Restated Certificate of Incorporation or our Restated By-Laws, as either may be amended from time to time, or (iv) any action asserting a claim against us or any of our directors, officers or other employees governed by the internal affairs doctrine.  Any person or entity purchasing or otherwise acquiring any interest in shares of our common stock is deemed to have received notice of and consented to the foregoing provisions.  This choice of forum provision may limit a stockholder’s ability to bring a claim in a judicial forum that it finds favorable for disputes with us or our directors, officers or other employees, which may discourage such lawsuits against us and our directors, officers and employees.  Alternatively, if a court were to find this choice of forum provision inapplicable to, or unenforceable in respect of, one or more of the specified types of actions or proceedings, we may incur additional costs associated with resolving such matters in other jurisdictions, which could adversely affect our business, financial condition or results of operations.

Item 1B. Unresolved Staff Comments

Not Applicable.

26

Item 2. Properties

We own or lease approximately 340 different facilities around the world, of which approximately half are in the U.S.  Our corporate headquarters is in Warsaw, Indiana.  Warsaw, Indiana is also home to our most significant manufacturing, research and development (“R&D”), and other business activities for our Knees, Hips and S.E.T. product categories.  Our Spine, CMF, Office Based Technologies and Dental product categories also have business unit headquarters located in the U.S. that are the primary facilities for these product categories’ manufacturing, R&D and other business activities.  Internationally, our EMEA regional headquarters is in Switzerland and our Asia Pacific regional headquarters is in Singapore.

We have approximately 30 manufacturing locations in the U.S. and internationally.  Our most significant locations outside of the U.S. are in Switzerland, Ireland, the U.K., China, and Puerto Rico.  We primarily own our manufacturing facilities in the U.S.; internationally, we occupy both owned and leased manufacturing facilities.

We maintain sales and administrative offices and warehouse and distribution facilities in more than 40 countries around the world.  These local market facilities are primarily leased due to common businesses practices and to allow us to be more adaptable to changing needs in the market.

We distribute our products both through large, centralized warehouses and through smaller, market specific facilities, depending on the needs of the market.  We maintain large, centralized warehouses in the U.S. and the Netherlands to be able to efficiently distribute our products to customers in the U.S. and EMEA.

We believe that all of the facilities and equipment are in good condition, well maintained and able to operate at present levels.  We believe the current facilities, including manufacturing, warehousing, R&D and office space, provide sufficient capacity to meet ongoing demands.  

Item 3. Legal Proceedings

Information pertaining to certain legal proceedings in which we are involved can be found in Note 20 to our consolidated financial statements included in Part II, Item 8 of this report and is incorporated herein by reference.

Item 4. Mine Safety Disclosures

Not Applicable.

27

PART II

Item 5. Market for the Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Our common stock is traded on the New York Stock Exchange and the SIX Swiss Exchange under the symbol “ZBH.”  As of February 7, 2020, there were approximately 17,900 holders of record of our common stock.  A substantially greater number of holders of our common stock are “street name” or beneficial holders, whose shares of record are held by banks, brokers and other financial institutions.

We expect to continue paying cash dividends on a quarterly basis; however, future dividends are subject to approval of the Board of Directors and may be adjusted as business needs or market conditions change.  

The information required by this Item concerning equity compensation plans is incorporated herein by reference to Item 12 of this report.

28

Item 6. Selected Financial Data

The financial information for each of the past five years ended December 31 is set forth below (in millions, except per share amounts):

	2019		2018			2017		2016		2015 (1)(2)
STATEMENT OF EARNINGS DATA
Net sales	$	7,982.2	$	7,932.9		$	7,803.3	$	7,668.4	$	5,997.8
Net earnings (loss) of Zimmer Biomet Holdings, Inc.		1,131.6		(379.2	)		1,813.8		305.9		147.0
Earnings (loss) per common share
Basic	$	5.52	$	(1.86	)	$	8.98	$	1.53	$	0.78
Diluted		5.47		(1.86	)		8.90		1.51		0.77
Dividends declared per share of common stock	$	0.96	$	0.96		$	0.96	$	0.96	$	0.88
Average common shares outstanding
Basic		205.1		203.5			201.9		200.0		187.4
Diluted		206.7		203.5			203.7		202.4		189.8
BALANCE SHEET DATA
Total assets	$	24,638.7	$	24,126.8		$	26,014.0	$	26,684.4	$	27,160.6
Long-term debt		6,721.4		8,413.7			8,917.5		10,665.8		11,497.4
Other long-term obligations		2,083.0		2,015.7			2,291.3		3,967.2		4,155.9
Stockholders' equity		12,392.8		11,276.1			11,735.5		9,669.9		9,889.4

⁽¹⁾ Effective January 1, 2018 we adopted Accounting Standards Update 2014-09 – Revenue from Contracts with Customers (Topic 606).  We adopted this new standard using the retrospective method, which resulted in us restating the 2017 and 2016 periods.  The 2015 period has not been restated.  

⁽²⁾ On June 24, 2015 we acquired LVB Acquisition, Inc.  Accordingly, the results of this significant acquisition have only been reflected in 2015 starting on that date.

29

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

The following discussion and analysis should be read in conjunction with the consolidated financial statements and the corresponding notes included elsewhere in this Annual Report on Form 10-K.  Certain percentages presented in this discussion and analysis are calculated from the underlying whole-dollar amounts and therefore may not recalculate from the rounded numbers used for disclosure purposes.  Certain amounts in the 2018 and 2017 consolidated financial statements have been reclassified to conform to the 2019 presentation.  The following discussion, analysis and comparisons generally focus on the operating results for the years ended December 31, 2019 and 2018.  Discussion, analysis and comparisons of the years ended December 31, 2018 and 2017 that are not included in this Form 10-K can be found in "Management's Discussion and Analysis of Financial Condition and Results of Operations" in Part II, Item 7 of the Company's Annual Report on Form 10-K for the year ended December 31, 2018.

EXECUTIVE LEVEL OVERVIEW

2019 Financial Highlights

In 2019, our net sales increased by 0.6 percent compared to 2018.  We estimate changes in volume/mix of our products and pricing had a positive effect of 2.2 percent on our 2019 sales while changes in foreign currency exchange rates had a negative effect of 1.6 percent.  Notably, our sales growth was higher in the second half of the year compared to the first half of the year primarily due to various product launches in our Knees product category, which drove improved commercial execution.  The improved second half performance was present in all of our product categories and geographic regions.  Additionally, the negative impact of changes in foreign currency exchange rates was less in the second half of 2019 compared to the first half.  

Our net earnings increased by more than $1.5 billion in 2019 from 2018.  We had significant goodwill and intangible asset impairments and litigation-related charges in 2018, which contributed to a net loss that year.  In 2019, expenses related to quality remediation, as well as acquisition and integration, declined due to the continued progress in completing those projects.  Higher sales, lower interest expense and the recognition of a deferred tax benefit related to Switzerland tax reform resulted in the significant increase in earnings in 2019 compared to 2018.  

2020 Outlook

We believe that the improved sales performance in the second half of 2019 will continue into 2020.  We estimate sales growth in 2020 compared to 2019 will be in a range of 2.5 percent to 3.5 percent.  We anticipate the impact from changes in foreign currency exchange rates will be minimal for 2020.  We expect to be able to leverage the sales growth into higher operating profits.  Additionally, we expect reductions in quality remediation costs, as well as other various project costs, as we complete these initiatives.  We have recently initiated restructuring activities designed to reduce our operating costs in the long-term.  These activities are expected to result in expenses of approximately $350 million to $400 million through the end of 2023, with slightly more than half of that expected to be incurred in 2020.   Further, we expect interest expense, net, will continue to decline in 2020 due to lower average outstanding debt balances.      

Our 2020 outlook does not consider any impacts from the recent outbreak of the coronavirus.  While there could be a near-term effect on our operating results, it is difficult to assess or predict how material the impact will be and what long-term effects the outbreak may have.

RESULTS OF OPERATIONS

We analyze sales by three geographies, the Americas, EMEA and Asia Pacific, and by the following product categories: Knees, Hips, S.E.T., Dental, Spine & CMF and Other.  This sales analysis differs from our reportable operating segments, which are based upon our senior management organizational structure and how we allocate resources towards achieving operating profit goals.  We analyze sales by geography because the underlying market trends in any particular geography tend to be similar across product categories and because we primarily sell the same products in all geographies.  

30

Net Sales by Geography

The following tables present net sales by geography and the components of the percentage changes (dollars in millions):

	Year Ended December 31,								Volume/							Foreign
	2019		2018		% Inc/(Dec)				Mix			Price				Exchange
Americas	$	4,875.8	$	4,837.2		0.8		%		4.0	%		(3.0	)	%		(0.2	)	%
EMEA		1,746.9		1,801.9		(3.1	)			4.3			(2.1	)			(5.3	)
Asia Pacific		1,359.5		1,293.8		5.1				9.1			(2.2	)			(1.8	)
Total	$	7,982.2	$	7,932.9		0.6				4.9			(2.7	)			(1.6	)

	Year Ended December 31,								Volume/							Foreign
	2018		2017		% Inc/(Dec)				Mix			Price				Exchange
Americas	$	4,837.2	$	4,844.8		(0.2	)	%		2.3	%		(2.4	)	%		(0.1	)	%
EMEA		1,801.9		1,745.2		3.2				1.7			(1.6	)			3.1
Asia Pacific		1,293.8		1,213.3		6.6				9.2			(3.5	)			0.9
Total	$	7,932.9	$	7,803.3		1.7				3.2			(2.4	)			0.9

“Foreign Exchange” used in the tables in this report represents the effect of changes in foreign currency exchange rates on sales.  

Net Sales by Product Category

The following tables present net sales by product category and the components of the percentage changes (dollars in millions):

	Year Ended December 31,							Volume/							Foreign
	2019		2018		% Inc/(Dec)			Mix			Price				Exchange
Knees	$	2,810.1	$	2,773.7		1.3	%		6.2	%		(3.0	)	%		(1.9	)	%
Hips		1,935.1		1,921.4		0.7			5.5			(3.0	)			(1.8	)
S.E.T.		1,795.7		1,751.8		2.5			5.4			(1.6	)			(1.3	)
Spine & CMF