6-K

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 6-K

Report of Foreign Private Issuer
Pursuant to Rule 13a-16 or 15d-16
of the Securities Exchange Act of 1934

For the month of: December, 2014

Platinum Group Metals Ltd.

(SEC File No. 001-33562)

Suite 788 — 550 Burrard Street, Vancouver BC, V6C 2B5, CANADA
Address of Principal Executive Office

Indicate by check mark whether the registrant files or will file annual reports under cover:

Form 20-F o Form 40-F x

Indicate by check mark if the registrant is submitting the Form 6-K in paper as permitted by Regulation S-T Rule 101(b)(1): o

Indicate by check mark if the registrant is submitting the Form 6-K in paper as permitted by Regulation S-T Rule 101(b)(7): o

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

Date:	December 19, 2014	“R. Michael Jones”
		R. MICHAEL JONES
		DIRECTOR & CEO

2

EXHIBIT INDEX

THE FOLLOWING DOCUMENTS ARE HEREBY INCORPORATED BY REFERENCE INTO THE REGISTRANT’S REGISTRATION STATEMENT ON FORM F-10 (FILE NO. 333-200824), AND TO BE A PART THEREOF FROM THE DATE ON WHICH THIS REPORT IS SUBMITTED, TO THE EXTENT NOT SUPERSEDED BY DOCUMENTS OR REPORTS SUBSEQUENTLY FILED OR FURNISHED:

Exhibit	Description
99.1	Amended and Restated Technical Report for the Update on Exploration Drilling at the Waterberg Joint Venture and Waterberg Extension Projects, South Africa (Latitude 23° 14’ 11”S, Longitude 28° 54’ 42”E), dated December 16, 2014
99.2	Consent of Qualified Person dated December 19, 2014
99.3	Consent of Qualified Person dated December 19, 2014

3

EX-99.1

Exhibit 99.1

Platinum Group Metals Ltd.

Amended and Restated Technical Report for the Update on Exploration
Drilling at the Waterberg Joint Venture and Waterberg Extension Projects,
South Africa
(Latitude 23° 14’ 11”S, Longitude 28° 54’ 42”E)

Report Date:16 December 2014

Exploration Drilling Update Effective Date:21 October 2014

Mineral Resource Estimate Effective Date:12 June 2014

Qualified Person:Kenneth Lomberg (Pr.Sci.Nat.)

Alan Goldschmidt (Pr.Sci.Nat.)

Coffey Mining South Africa (Pty) Ltd

Author(s):
Kenneth Lomberg	Senior Principal	B.Sc. (Hons) Geology, B.Com. M.Eng. Pr.Sci.Nat., FGSSA
Alan Goldschmidt	Senior Consultant	B.Sc.(Hons) Geology, GDE, Pr.Sci.Nat., MGSSA
Date:	16 December 2014
Project Number:	JWAT05

Document Review and Sign Off

Alan GoldschmidtSenior Consultant	Kenneth Lomberg Senior Principal

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 1

Coffey Mining South Africa (Pty) Ltd

Date and Signature Page

This report titled “Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and Waterberg Extension Projects, South Africa” with an effective date of 21 October 2014 was prepared on behalf of Platinum Group Metals (Pty) Ltd by Kenneth Lomberg and Alan Goldschmidt and signed:

Dated at Roodepoort, South Africa, this 16 December 2014

Kenneth Lomberg, B.Sc.(Hons) Geology, B.Com., M.Eng., Pr.Sci.Nat., FGSSA.Senior Principal

Alan Goldschmidt, B.Sc.(Hone) Geology, Pr.Sci.Nat., MGSSASenior Consultant

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 1

Coffey Mining South Africa (Pty) Ltd

Table of Contents

1	Summary			1
	1.1	Introduction		1
	1.2	Project Area and Location		1
	1.3	Geological Setting, Deposit Type and Mineralization		2
	1.4	Local Geology		3
	1.5	Exploration Status		4
		1.5.1	Drilling	7
		1.5.2	Sample Preparation	8
		1.5.3	Analysis	8
		1.5.4	Quality Control and Quality Assurance	9
	1.6	Mineral Resources		9
	1.7	Interpretation and Conclusions		12
2	Introduction			15
	2.1	Scope of the Report		15
	2.2	Principal Sources of Information		15
	2.3	Qualifications and Experience		15
	2.4	Independence		16
3	Reliance on Other Experts			17
4	Property Description and Location			18
	4.1	Property Description and Location		18
	4.2	Mining Tenure		20
	4.3	Licence Status		21
	4.4	Holdings Structure		25
	4.5	Royalties and Agreements		26
	4.6	Environmental Liabilities		26
	4.7	Legal Access		26
5	Accessibility, Climate, Local Resources, Infrastructure and Physiography			27
	5.1	Access		27
	5.2	Climate		27
	5.3	Physiography		27
	5.4	Local Resources and Infrastructure		28
6	History			29
	6.1	Ownership History		29

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page i

Coffey Mining South Africa (Pty) Ltd

	6.2	Exploration History		29
	6.3	Mineral Resource History — Waterberg JV Project		30
		6.3.1	September 2012	30
		6.3.2	February 2013	31
		6.3.3	September 2013	32
	6.4	Production History		33
7	Geological Setting and Mineralization			34
	7.1	Regional and Local Setting		34
		7.1.1	Bushveld Complex Stratigraphy	35
		7.1.2	The Northern Limb	37
		7.1.3	The Platreef and its Mineralization	40
	7.2	Waterberg Group /Bushveld Complex Age Relationship		41
	7.3	Project Geology		42
		7.3.1	Stratigraphy	48
		7.3.2	Structure	50
	7.4	Mineralized Zones		50
8	Deposit Types			54
9	Exploration			55
	9.1	Current Exploration		55
		9.1.1	Surface Mapping	55
		9.1.2	Geochemical Soil Sampling	56
	9.2	Geophysical Surveys		56
		9.2.1	Waterberg JV Project — Initial survey	56
		9.2.2	Extended Airborne Gravity Gradient and Magnetics	57
		9.2.3	Ground Gravity	62
	9.3	Coffey: Technical Review		62
10	Drilling			63
	10.1	Drilling in 2010		63
	10.2	Drilling in 2011 to 2013		63
	10.3	Exploration Drilling Status 21 October 2014		63
	10.4	Drilling Quality		67
	10.5	Diamond Core Sampling		67
	10.6	Sample Recovery		67
	10.7	Sample Quality		67
	10.8	Interpretation of Results		67
	10.9	Coffey: Technical Review		72
11	Sample Preparation, Analyses and Security			73

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page ii

Coffey Mining South Africa (Pty) Ltd

	11.1	Core Handling		73
	11.2	Core Logging and Identification of Mineralized Layers		73
	11.3	Sampling Methodology		74
	11.4	Sample Quality and Sample Bias		76
	11.5	Supervision of Sample Preparation		76
	11.6	Sample Preparation		77
	11.7	Sample Security		77
	11.8	Chain of Custody		78
	11.9	Analytical Procedure		78
	11.10	Sample Preparation		78
	11.11	Precious Metal Determination		78
	11.12	Base metals Determination		79
	11.13	Laboratory QA/QC		79
	11.14	Quality Assurance and Quality Control (QA/QC) Procedures and Results		79
	11.15	Analytical Quality Assurance and Quality Control Data		80
	11.16	Waterberg JV Project Area		83
	11.17	Waterberg Extension Project Area		86
	11.18	Recommendations and Conclusion		88
	11.19	Adequacy of Procedures		88
	11.20	Coffey: Technical Review		89
12	Data Verification			90
	12.1	Accurate Placement and Survey of Borehole Collars		90
	12.2	Downhole Surveys		91
13	Mineral Processing and Metallurgical Testing			92
14	Mineral Resource Estimates			94
	14.1	Methodology		95
		14.1.1	T - Zone Estimation	95
		14.1.2	F - Zone Estimation	96
	14.2	Density		101
	14.3	Compositing		101
	14.4	Descriptive Statistics: Composites		101
	14.5	Rhodium Analysis		102
	14.6	Outlier Analysis		104
	14.7	Block Model Development		104
		14.7.1	T - Zone	104
		14.7.2	F — Zone Units	104
	14.8	Mineral Resource Estimate		105

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page iii

Coffey Mining South Africa (Pty) Ltd

		14.8.1	T — Zone	105
		14.8.2	F — Zone	106
	14.9	Search Criteria		107
	14.10	Cut-off Grades		107
	14.11	Geological Loss		108
	14.12	Classification		110
	14.13	Mineral Resource Reporting		111
15	Adjacent Properties			114
	15.1	The Pan Palladium/Impala Platinum JV		114
	15.2	Mogalakwena Mine		114
	15.3	Akanani Project		114
	15.4	Boikgantsho Project		114
	15.5	Harriet’s Wish and Aurora Projects		115
	15.6	Platreef Project (Ivanplats)		115
16	Other Relevant Data and Information			116
17	Interpretation and Conclusions			117
18	Recommendations			119
19	References			120

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page iv

Coffey Mining South Africa (Pty) Ltd

List of Tables

Table 1.6_1 — Waterberg Project Mineral Resource Estimate (12 June 2014)	11
Table 4.2_1 — Summary of Mineral Exploration and Mining Rights (South Africa)	20
Table 4.3_1 — Summary of Waterberg Extension Project Prospecting Rights	22
Table 6.3.1_1 — Waterberg Project Mineral Resource Estimate (1 September 2012)	31
Table 6.3.2_1 — Waterberg Project Mineral Resource Estimate (1 February 2013)	32
Table 6.3.3_1 — Waterberg Project Mineral Resource Estimate (2 September 2013)	33
Table 10.8_1 — Recent T-Zone intercepts for the Waterberg JV Project Area	68
Table 10.8_2 — Recent F-Zone intercepts for the Waterberg JV Project Area	69
Table 10.8_3 — Recent F-Zone intercepts for the Waterberg Extension Project Area	71
Table 11.15_1 — Summary of the Number of Control Samples Used in the Waterberg JV Project Area	82
Table 11.15_2 — Summary of the Number of Control Samples Used in the Extension Project Area	82
Table 11.15_3 — Summary of Certified Reference Standards Used	83
Table 14_1 — Summary of the Mineral Resource Estimate Data	94
Table 14.5_1 — Correlation Coefficient for Rh against other assayed elements	102
Table 14.5_2 — Correlation Factors for Rh	104
Table 14.7.1_1 — Summary of the Block Model details	104
Table 14.7.2_1 — Summary of Block Model Details	105
Table 14.9_1 — Estimation search parameters (F — Layers)	107
Table 14.12_1 — Confidence Levels of Key Criteria	110
Table 14.13_1 — Waterberg Project Mineral Resource Estimate F - Zone (12 June 2014)	112
Table 14.13_2 — Waterberg Project Mineral Resource Estimate (12 June 2014)	113

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page v

Coffey Mining South Africa (Pty) Ltd

List of Figures

Figure 1.5_1 — Borehole Location and Geology of the Waterberg JV and Extension Projects	6
Figure 4.1_1 — Location of the Waterberg Project Properties on the Bushveld Complex	19
Figure 4.3_1 — Locations of the Waterberg Project Properties	23
Figure 4.3_2 — Location of the Waterberg Project Prospecting Rights	24
Figure 4.4_1 — Schematic Diagram of the Holdings of the Waterberg Project	25
Figure 5.3_1 — Photograph looking towards the Eastern side of the Waterberg Project	28
Figure 7.1_1 — Geological map of the Bushveld Complex showing the location of the Waterberg Projects	35
Figure 7.1.1_1 — Generalised Stratigraphic Column of Rustenburg Layered Suite	37
Figure 7.1.2_1 — General Geology of the northern limb of the Bushveld Complex	38
Figure 7.1.2_2 —Geology of the northern limb showing the Various Footwall Lithologies	39
Figure 7.3_1 — Geology of the Waterberg Project	43
Figure 7.3_2 — Section Showing Geology at Waterberg Project	44
Figure 7.3_3 — Geology of the Waterberg Extension Project	47
Figure 7.3.1_1 — General Stratigraphy of the Waterberg Projects	49
Figure 7.4_1 — Stratigraphy of the Mineralised Layers	51
Figure 7.4_2 — Individual Units of the F - Zone	53
Figure 9.1.2_1 — Locations of Geochemical Sampling and Geophysical Traverses	58
Figure 9.2.2_1 — Airborne Gradient Gravity and Magnetic Survey Flight Lines	59
Figure 9.2.2_2 —Airborne Gradient Gravity Plot with Interpreted Bushveld Complex Edge	60
Figure 9.2.2_3 — Airborne Total Field Magnetics Plot with Interpreted Bushveld Complex Edge	61
Figure 10.3_1 — Location of Boreholes on the Waterberg JV Project	65
Figure 10.3_2 — Location of Boreholes on the Waterberg Extension Project	66
Figure 11.1_1 — Photograph of an Example of Borehole Marking	74
Figure 11.3_1 — Photograph of Core Cutting	75
Figure 11.3_2 — Photograph of an Example of Sampling Methodology	76
Figure 12.1_1 — Permanent Borehole Beacon	90
Figure 14.1.1_1 — A Geological Interpretation for the T - Zone	96
Figure 14.1_1 — Area Underlain by the T- Layer and F - Zone	98

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page vi

Coffey Mining South Africa (Pty) Ltd

Figure 14.1_2 — Isometric views of the Structural Model for the T- Layer and F - Zone	100
Figure 14.4_1 — Summary of Statistics for the Composites of Each Layer	101
Figure 14.4_2 — Summary of Statistics for the Composites of Each Layer	102
Figure 14.5_1 — Correlation of Rh against Pt and Pd	103
Figure 14.11_1 — Area of Geological Loss for the T- Zone and F - Zones	109

List of Appendices

Appendix A — Authors Certificate 1

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page vii

Coffey Mining South Africa (Pty) Ltd

1SUMMARY

1.1Introduction

Coffey Mining (South Africa) Pty Limited (Coffey) has been requested by Platinum Group Metals  (Pty) Ltd (PTM), on behalf of Platinum Group Metals Ltd, the issuer, to complete an Independent Amended and Restated Technical Report on the Exploration Drilling supporting the October 21, 2014 public disclosure of the Updated drilling results for the at the Waterberg Joint Venture (JV) Project and the Waterberg Extension Project.  These are two adjoining projects targeting a previously unknown extension to the northern limb of the Bushveld Complex that may have the potential for Platinum Group Metals (PGMs), gold and base metals (Cu, Ni).  This report complies with disclosure and reporting requirements set forth in the Toronto Stock Exchange Manual, National Instrument 43-101 Standards of Disclosure for Mineral Project (NI 43-101), Companion Policy 43-101CP to NI 43-101, and Form 43-101F1 of NI 43-101.

This report reviews the geology, the exploration activities and states the most recent mineral resource estimation on the Waterberg JV Project and Waterberg Extension Project (Effective Date: 12 June-2014).  The report provides an update of the exploration activities completed subsequent to the last filed technical report on the resource estimate dated 12 June-2014 up to the effective date of 21 October- 2014 to correspond to the public disclosure up to that date.

1.2Project Area and Location

The Waterberg JV Project and Waterberg Extension Project are adjoining Projects that cover an area along the strike length of the previously unknown northward extension of the Bushveld Complex.

Waterberg JV Project

The Waterberg Project is the result of a regional target initiative of PTM.  The area was targeted based on detailed geophysical, geochemical and geological work that indicated potential for a package of Bushveld Complex rocks under the Waterberg Group cover rocks.  The project area is along trend, off the northern end of the mapped northern limb of the Bushveld Complex in South Africa that indicated potential for a package of Bushveld Complex rocks under the Waterberg formation cover rocks.

The Waterberg JV Project is made up of four prospecting rights covering an area of 25,465ha.  PTM has prospecting rights which allow it to apply for the conversion of the prospecting right into a mining right within the renewal period of three years.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 1

Coffey Mining South Africa (Pty) Ltd

Waterberg Extension Project

The southern boundary of the Waterberg Extension Project is located some 85km north of the town of Mokopane, Limpopo Province.  The project currently consists of five prospecting rights.  The area of the prospecting rights covers 86,417ha and extends some 42km from north to south and 42km from east to west.

1.3Geological Setting, Deposit Type and Mineralization

PGM-dominated deposits occur in large layered intrusions, such as the Bushveld Complex (South Africa), the Stillwater Complex (Montana) and the Great Dyke (Zimbabwe).  The Waterberg JV and Extension Projects are located on the northern limb of the Bushveld Complex.  The 2,060 million year old Bushveld Complex, with a total extent of approximately 66,000km2, is the world’s largest zoned mafic intrusions.  The mafic rocks of the Bushveld Complex host zones rich in PGMs, chromium and vanadium, and constitute the largest known resource of these metals.  In addition, nickel and copper are generally associated with the PGMs and are significant by-products.

The mafic rocks are collectively termed the Rustenburg Layered Suite (RLS) and have been divided into five zones known as the Marginal, Lower, Critical, Main and Upper Zones.

The Critical Zone is characterised by regular rhythmic layering of cumulus chromite within pyroxenites, anorthosites, norites and olivine-rich rocks.  It hosts virtually all the economic mineralization encountered in the Bushveld Complex.

The first economically significant cycle from a PGM perspective is the UG2 Chromitite Layer.  The two uppermost cycles of the Critical Zone are the Merensky and Bastard cycles.  The former is of great economic importance as it contains at its base the PGM-bearing Merensky Reef.  In the western part of the Bushveld Complex, several metres below the Merensky Reef, a unit known as the Pseudo Reef occurs that is known to be mineralized with PGMs.

In the northern limb, the Platreef mineralization occurs proximal to the basal contact of the Bushveld Complex with the country rock, typically as a thicker zone (up to 30m thick) containing disseminated sulphides.  Where the Bushveld Complex is in contact with the Archaean granite and sediments of the Transvaal Supergroup floor rocks, the Platreef is developed.  The contact between the RLS and footwall rocks in the northern limb is transgressive, with the Platreef in contact with progressively older rocks of different lithologies from south to north.

The Platreef is a series of pyroxenites and norites, containing xenoliths/rafts of footwall rocks.  It is irregularly mineralized with PGM, Cu and Ni.  The Platreef (senso stricto) has a strike extent of some 30km, whereas Platreef-style mineralization occurs over the 110km strike length of the northern limb (Kinnaird et al, 2005).  The Platreef varies from 400m thick in the south of the northern limb to <50m in the north.  The overall strike is northwest or north, with dips 40°—45° to the west at

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 2

Coffey Mining South Africa (Pty) Ltd

surface with the dip becoming shallower down dip.  The overall geometry of the southern Platreef appears to have been controlled by irregular floor topography.

The Waterberg JV Project and Waterberg Extension Project appear to be on strike along an extension of the Bushveld Complex.  The mineralization has a different setting and metal ratio to the Platreef.

1.4Local Geology

The drilling programmes undertaken by PTM on the Waterberg JV Project and Waterberg Extension Project have identified an extension to the Bushveld Complex beneath the sedimentary rocks of the Proterozoic Waterberg Group which in areas is covered by a veneer of Quaternary sand.  Further west, the Waterberg Group thickens to more than 760m and typically displays a downward coarsening with pebble beds and conglomerates towards the base.

The PGM mineralization at the Waterberg JV Project and the Waterberg Extension Project is hosted in modified felsic rocks: gabbros and anorthosites as well as in pyroxenites, troctolites, harzburgites and gabbronorites of the Bushveld Complex.  Layers of PGM mineralization are generally accompanied by significant concentrations of base metal sulphides, with pyrrhotite and chalcopyrite being dominant over pentlandite.

A geological model was developed for the project area based on the data from the various boreholes, structural interpretation from aerial photographs and geophysics.  A general dip of 34º - 38º towards the northwest is observed from borehole core for the layered units intersected on the Waterberg property within the Bushveld Package.  However, some blocks may be tilted at different angles depending on structural and /or tectonic controls.  Generally the Bushveld package strikes southwest to northeast.

The field relationships in the vicinity of the Waterberg JV Project and Waterberg Extension Project were noted to indicate that the Bushveld Complex is unconformably overlain by the sandstones of the Setlaole Formation of the Waterberg Group, which is post-Bushveld in age.  The core drilling undertaken by PTM shows that an angular unconformity exists between the Waterberg Group and underlying Bushveld Complex.  The nature of the relationship between the Waterberg Group and the Bushveld Complex is confirmed as having no bearing on the presence of mineralization in Bushveld Complex.  The mineralization in the Waterberg Project area generally comprises sulphide blebs, net-textured to interstitial sulphides and disseminated sulphides within gabbronorite and norite, pyroxenite, troctolite, harzburgite.

The T - Zone occurs within the Main Zone just beneath the contact of the overlaying Upper Zone.  Although the T — Zone consists of numerous mineralized layers, two potential economical layers

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 3

Coffey Mining South Africa (Pty) Ltd

have been identified, T1- and T2 - Layers.  They are composed mainly of anorthosite, pegmatoidal gabbros, pyroxenite, troctolite, harzburgite, gabbronorite and norite.

The F - Zone occurs towards the bottom of the Bushveld Complex in a cyclic unit of olivine rich lithologies.  T his zone consists of alternating units of harzburgite, troctolite and pyroxenites.  The F - Zone has been sub divided into the FH and FP layers.  The FH layer has significantly higher volumes of olivine in contrast with the lower lying FP layer, which is predominately pyroxenite.  The FH layer is further subdivided into six cyclic units chemically identified by their geochemical signature, especially chrome.  The base of these units can also be lithologically identified by a pyroxenite layer.

The base of the Bushveld Complex is a mix of the Archaean age Hout River Gneiss Suite and fine grained pyroxenitic bands.

1.5Exploration Status

The Waterberg JV Project is more advanced in terms of the exploration status and includes an Inferred Mineral Resource estimate.  The majority of the Waterberg Extension Project is at an advanced exploration stage.  However recent drilling on the property Early Dawn, just north of the Waterberg JV Project has established sufficient surface drilling information to confirm continuity of mineralization, hence areas can be classified as an Inferred Mineral Resource.

Waterberg JV Project

Previous mineral exploration activities were limited due to the extensive sand cover and the understanding that the area was underlain by the Waterberg Group.  Surface mapping has been undertaken but it is noted that most of the area surrounding the Waterberg Mountains is covered by Waterberg sands (Figure 1.5_1).  Mapping in these areas has provided no additional information as the Bushveld Complex is sub outcropped below Waterberg sediments.

In March 2010 (two north-south sampling lines) and later during December 2011 and January 2012 (two additional north-south lines), geochemical soil sampling was undertaken.  A total of 601 samples, of which 255 were soil samples, 277 stream sediment samples and 79 rock chip samples, were collected.

Approximately 60 lines of geophysical survey for 488 line km using gravity and magnetics were traversed in March 2010.  A second phase of Geophysical Survey was also conducted on the farm Ketting 368LR from August 2011 to September 2011.

Anomalous soil results in platinum group metals in areas that were thought, in the regional mapping, to be covered by thick sediments younger than the Bushveld Complex, provided initial interest in the property.  The geochemistry added to the geophysical results which suggested a Bushveld

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 4

Coffey Mining South Africa (Pty) Ltd

Complex extension in the property area, potentially at reasonable depth.  Based on the exploration combined with the target generation, diamond drilling commenced in 2010.  The drilling confirmed the presence of the rocks of the Bushveld Complex.  Exploration has thus been largely driven by drilling.  The relationship between the Bushveld Complex and Waterberg Group is the subject of discussion between PTM and geologists from various universities.  The age of the rocks of the Bushveld rocks relative to the sedimentary cover is not considered critical to the geological model of the mineralized rocks in the Bushveld Complex.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 5

Coffey Mining South Africa (Pty) Ltd

Figure 1.5_1

Borehole Location and Geology of the Waterberg JV and Extension Projects

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 6

Coffey Mining South Africa (Pty) Ltd

Waterberg Extension Project

PTM contracted FUGRO Airborne Surveys (Pty) Ltd.  to conduct airborne FALCON® gravity gradiometry and a total field magnetic survey in April 2013.  The target for the surveys was the interpreted edge sub-outcropping of the denser Bushveld Complex to which the Waterberg Group sediments form the regional hanging wall.  The survey was flown on 100m and 200m line spacing and was comprised of 2306.16 line kilometres of Airborne Gravity Gradiometry (AGG) data and 2469.35 line kilometres of magnetic and radiometric data.  The total extent of the survey covered approximately 30km2 of interpreted Bushveld Complex edge within the Waterberg JV Project and Waterberg Extension Project areas.  Modelling of the data suggests that there may be a northeast and north trending continuity to the Bushveld Complex rocks on the Waterberg Extension Project which may have the potential to host PGM mineralization.

Later in September 2013 nine ground gravity traverses were completed by Geospec Instruments (Pty) Ltd along roads and tracks.  The survey lines were designed to traverse across the projected edge of the Bushveld Complex on the Waterberg Extension Project in the same area covered by the airborne survey as ground confirmation of the airborne results.  The two surveys were compared and there was acceptable correlation between gravity data sets.  In planning the ground survey, one control line over the known Bushveld Complex edge, at the point where it projected from the adjacent Waterberg JV Project was completed in order to acquire a signature profile over a known source with which to compare the remaining regional lines.  The interpretation of the linked ground gravity profiles suggests that there may be a northeast trending continuity to the Bushveld Complex rocks.  The drilling confirmed the presence of the rocks of the Bushveld Complex.

Ground exploration work undertaken includes geological mapping and ground verification of the geology presented in various government and academic papers.  The major faults and South Marginal Zone (SMZ) geology described was confirmed to exist within the property.  Contact relations with the Bushveld Complex were not seen due to the Waterberg cover rock and quaternary sand deposits.

1.5.1Drilling

Since the declaration of the mineral resource (12June 2014), an additional 71,459m of diamond drilling have been completed at the Waterberg JV and Waterberg Extension combined.  This report updates the technical disclosure of that drilling.

The management of the drilling programmes, logging and sampling have been undertaken from the same facility at the town of Marken in Limpopo Province, South Africa.

Drilled core is cleaned, de-greased and packed into metal core boxes by the drilling company.  The core is collected from the drilling site on a daily basis by a PTM geologist and transported to the coreyard by PTM personnel.  Before the core is taken off the drilling site, core recovery and the

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 7

Coffey Mining South Africa (Pty) Ltd

depths are checked.  Core logging is done by hand on a pro-forma sheet by qualified geologists under supervision of the Project Geologist.

Waterberg JV Project

Based on the target generation and the results of the geochemical sampling and geochemical surveys, two boreholes were initially drilled between July and October 2010 on the farm Disseldorp 369LR.  A total of 1934.77m was drilled for the first two boreholes in 2010.  Drilling resumed in 2011 on the farm Ketting.  The geological information revealed by this borehole lead to the extension of the drilling campaign in 2012, 2013 and 2014.

Subsequent to the boreholes used for the mineral resource estimate of 12 June-2014, an additional 53,684m representing 56 exploration boreholes and 58 deflections have been completed on the Waterberg JV Project.

Waterberg Extension Project

Based on the strike projections from the Waterberg JV Project, modelling of regional government data, detailed airborne gradient gravity and total field magnetic responses along with ground gravity confirmation, drill targets were generated and drilling commenced in October 2013 on the farm Early Dawn 369LR.

Subsequent to the boreholes used for the mineral resource estimate of 12 June-2014 and additional 17,775,m in 12 exploration boreholes and 26 deflections have been completed on the Waterberg Extension Project.

1.5.2Sample Preparation

The sampling methodology concurs with PTM protocol based on industry best practice.  The quality of the sampling is monitored and supervised by a qualified geologist.  The sampling is done in a manner that includes the entire potentially economic unit.

1.5.3Analysis

For the present database, field samples have been analyzed by two different laboratories: the primary laboratory is currently Set Point laboratories (South Africa).  Genalysis (Australia) is used for referee test work to confirm the accuracy of the primary laboratory.

Samples are received, sorted, verified and checked for moisture and dried if necessary.  Each sample is weighed and the results are recorded.  Rocks, rock chips or lumps are crushed using a jaw crusher to less than 10mm.  The samples are then milled for 5 minutes in a Labtech Essa LM2 mill to achieve a fineness of 90% less than 106µm, which is the minimum requirement to ensure the best accuracy and precision during analysis.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 8
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

Samples are analysed for Pt (ppm), Pd (ppm) Rh (ppm) and Au (ppm) by standard 25g lead fire-assay using a silver collector.  Rh (ppm) is assayed using the same method but with a palladium collector and only for selected samples.  After pre-concentration by fire assay the resulting solutions are analysed using ICP-OES (Inductively Coupled Plasma—Optical Emission Spectrometry).

The base metals (copper, nickel, cobalt and chromium) are analysed using ICP-OES (Inductively Coupled Plasma — Optical Emission Spectrometry) after a four acid digestion.  This technique results in “almost” total digestion.

The drilling, sampling and analytical aspects of the project are considered to have been undertaken to industry standards.  The data is considered to be reliable and suitable for mineral resource estimation.

1.5.4Quality Control and Quality Assurance

PTM have instituted a complete QA/QC programme including the insertion of blanks and certified reference materials as well as referee analyses.  The programme is being followed and is considered to be to industry standard.  The data is as a result, considered reliable.

1.6Mineral Resources

The mineral resource estimate (Effective Date: 12 June 2014) is reported for completeness of this report.  There have been no new mineral resource estimates declared since that date.  The mineral resources reported are located within the Waterberg JV Project Area and in the southern portion of the Waterberg Extension Project Area (Table 1.6_1).  There has been insufficient drilling elsewhere on Waterberg Extension Project to update the mineral resource estimate.

Mineral resources have been declared for the T- and F - Zone mineralization on the property Ketting 368LR and Goedetrouw 366LR of the Waterberg JV Project and Early Dawn 361LR of the Waterberg Extension Project.

The data that formed the basis of the estimate are the boreholes drilled by PTM which consist of geological logs, the borehole collars, the downhole surveys and the assay data.  The area where each layer was present was delineated after examination of the intersections in the various boreholes.

The data was used to define the characteristics of the various layers based on their geochemical signatures.  However, it was necessary to check the procedure against the core.  As a result a validation was undertaken on the core with the intention of finding diagnostic features to identify the layers directly from the core.  This was successfully achieved for the T — Zone.  However, due to pervasive alteration, this proved difficult for the F - Zone.  For estimation of the mineral resources

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 9
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

reported in September 2013, modelling of the mineralization within the F - Zone was based on its stratigraphic position at the base of the magmatic sequence and on geochemical data.

Seven subunits within the broader F - Zone (FP and FH1 — FH6) have been identified based on their geochemical characteristics.

Data from the drilling completed by PTM in the estimate consists of intersections from 138 completed boreholes.  Each borehole was examined for completeness in respect of data (geology, sampling, collar) and sample recovery prior to inclusion in the estimate.

Geological models (wireframes) of the seven F - Zone units were modelled by CAE Mining (South Africa) on behalf of PTM, using the Strat 3D module of CAE Mining Studio™.

The coded borehole database supplied by PTM was composited for Pt, Pd, Au, Cu, Ni and density.  For each unit a three dimensional block model was modelled and an inverse distance weighted (power 2) estimate was undertaken.

Coffey considers that the mineral resource of the various layers should be classified as an Inferred Mineral Resource.  The data is of sufficient quality and the geological understanding and interpretation are considered appropriate for this level of mineral resource classification.

Two areas were defined defining areas where geological loss of 25% and 12.5% were applied.  These were based primarily on the spacing of surface boreholes and on the knowledge of this type of deposit.  The geological losses are made up of areas where the Zones may be absent due to faults, dykes and mafic/ultramafic pegmatites.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 10
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

Table 1.6_1

Waterberg Project-

Mineral Resource Estimate (SAMREC Code) (12 June 2014)

	StratigraphicThickness(m)	TonnageMt	Pt (g/t)	Pd (g/t)	Rh (g/t)	Au (g/t)	PGE+Au (g/t)	Pt:Pd:Rh:Au	PGE+Au (koz)	Cu (%)	Ni (%)	Cu (Mlbs)	Ni (Mlbs)
T1(Cut-off=2g/t)	2.44	10.49	1.02	1.52		0.47	3.01	34:50:0:16	1,015	0.17	0.10	40	23
T2	3.87	43.57	1.14	1.99		0.82	3.95	29:50:0:21	5,540	0.17	0.09	167	90
T Total	3.60	54.06	1.12	1.90		0.75	3.77	30:50:0:20	6,555	0.17	0.10	207	114
F(Cut-off=2g/t)	2.75-60	232.82	0.90	1.93	0.05	0.14	3.01	30:64:2:4	22,529	0.08	0.19	409	994
Total		286.88	0.94	1.92	0.04	0.25	3.15	30:61:1:8	29,084	0.10	0.18	617	1,107
Content (koz)			8,652	17,741	341	2,350			kt	280	502

Waterberg Project- (JV)

	StratigraphicThickness(m)	TonnageMt	Pt (g/t)	Pd (g/t)	Rh (g/t)	Au (g/t)	PGE+Au (g/t)	Pt:Pd:Rh:Au	PGE+Au (koz)	Cu (%)	Ni (%)	Cu (Mlbs)	Ni (Mlbs)
T1(Cut-off=2g/t)	2.44	10.49	1.02	1.52		0.47	3.01	34:50:0:16	1,015	0.17	0.10	40	23
T2	3.87	43.57	1.14	1.99		0.82	3.95	29:50:0:21	5,540	0.17	0.09	167	90
T Total	3.60	54.06	1.12	1.90		0.75	3.77	30:50:0:20	6,555	0.17	0.10	207	114
F(Cut-off=2g/t)	2.75-60	164.58	0.88	1.91	0.05	0.13	2.97	30:64:2:4	15,713	0.07	0.18	247	649
Total		218.64	0.94	1.91	0.03	0.29	3.17	30:60:1:9	22,268	0.09	0.16	455	763
Content (koz)			6,605	13,407	239	2,018			kt	207	346

Waterberg Project- (Ext)

	StratigraphicThickness(m)	TonnageMt	Pt (g/t)	Pd (g/t)	Rh (g/t)	Au (g/t)	PGE+Au (g/t)	Pt:Pd:Rh:Au	PGE+Au (koz)	Cu (%)	Ni (%)	Cu (Mlbs)	Ni (Mlbs)
F(Cut-off=2g/t)	2.75-60	68.04	0.93	1.98	0.05	0.15	3.11	30:64:2:4	6,802	0.11	0.23	162	344
Total		68.04	0.93	1.98	0.05	0.15	3.11	30:64:2:4	6,802	0.11	0.23	162	344
Content (koz)			2,043	4,325	102	331			kt	73	156

The T-Zone cut-off is reported as 2PGE+Au and the F - Zone cut-off is reported as 3PGE+Au grade
Individual numbers may not add up due to rounding

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 11

Coffey Mining South Africa (Pty) Ltd

Mineral resources which are not mineral reserves have demonstrated economic viability.  The estimate of mineral resources may be materially affected by environmental, permitting, legal, marketing, or other relevant issues.

There is no guarantee that all or any part of the Mineral Resource will be converted to a Mineral Reserve.

The independent Qualified Persons responsible for the mineral resource estimate in this report and summarized in Table 1.6_1 are Kenneth Lomberg and Alan Goldschmidt

Kenneth Lomberg, a geologist with some 29 years’ experience in mine and exploration geology, resource and reserve estimation and project management in the minerals industry (especially platinum and gold).  He is a practising geologist registered with the South African Council for Natural Scientific Professions (Pr.Sci.Nat.) and is independent of Platinum Group Metals Ltd as that term is defined in Section 1.5 of the Instrument.

Alan Goldschmidt, a geologist with some 29 years’ experience in minerals industry.  He has been primarily been involved with geological block models and geostatistical resource estimation.  He is a practising geologist registered with the South African Council for Natural Scientific Professions (Pr.Sci.Nat.) and is independent of Platinum Group Metals Ltd as that term is defined in Section 1.5 of the Instrument.

1.7Interpretation and Conclusions

Exploration drilling by PTM has intersected layered magmatic PGM mineralization in what is interpreted to be the northern extension of the northern limb of the Bushveld Complex under the Waterberg Group rocks.

Exploration drilling has confirmed the presence of mineralization.  Elevated PGM concentrations have been identified in mineralized zones/layers consistent with layered magmatic sulphide deposits and displays characteristics of a geological setting, including the ratio of precious metals that differs from other locations in the Bushveld Complex.

In conclusion, Coffey recommended that drilling continue and that more detailed logging be undertaken to improve the geological understanding and allow for improved layer definition.

The scale of the inferred mineral resource and the fact that the mineralization is open to the west would suggest that a drill program be extended into this area.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 12
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

Waterberg JV Project

After the mineral resource estimate (Effective Date: 2 September 2013) there was an update (Effective Date 12 June 2014) which is a significant increase in inferred mineral resource.  This is primarily due to extension of the mineral resource further north and to a depth of 1250m from a previous 1,000m depth cut-off.  The delineation of the F - Zone has been advanced due to better understanding of the geology.

The mineral resource (Effective Date 12 June 2014) for the identified mineralized layers within this project area, utilised the exploration database that contained 114 boreholes with 307 intersections.   The mineralization is considered open down-dip and along strike.

It is recommended to advance that further detailed logging and refined modelling the geological will advance the geological confidence in the model.   In addition the infill drilling should continue as it may assist to improve the confidence in determining the grade and geological continuity.

Waterberg Extension Project

Exploration on the Waterberg Extension Project has confirmed the presence of Bushveld rocks under the Waterberg Group.  Exploration drilling has confirmed the presence of the continuation of the mineralized F - Zone along strike from the adjacent Waterberg JV Project.  Elevated PGM concentrations have been identified in mineralized zones/layers consistent with layered magmatic sulphide deposits and displays characteristics of a geological setting, including the ratio of precious metals that differs from other locations in the Bushveld Complex.

An interpretation of the position of the Bushveld Complex was made after modelling of data from airborne gradient gravity and magnetics, regional magnetics and ground gravity surveys.  The three methods of interpretation all indicate that the Bushveld Complex continues in a northeast to northerly arc from the known position from drilling in the southern area of the Project.

The continuity of geological features and mineralized layers has been confirmed.  The database for the Waterberg Extension Project used fro the latest mineral resource estimate (Effective Date 12 June 2014) contains 24 boreholes with 56 intersections.  The geophysical data and the new drilling supports the model that the mineralization is open down-dip and along strike.  The new data supports the previous recommendation that further drilling would confirm the location of the northern extension of the Bushveld Complex.

It is now recommended that drilling continue on the Waterberg Extension Project on a 250m x 250m grid to support a Mineral Resource Estimate in the areas where mineralization of sufficient grade and width has been intersected.  In addition the infill drilling should continue as it may assist to improve the confidence in determining the grade and geological continuity.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 13
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

It is recommended that consideration be given to the commencement of a Pre-feasibility Study.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 14
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

2INTRODUCTION

2.1Scope of the Report

Coffey Mining (South Africa) Pty Limited (Coffey) has been requested by Platinum Group Metals  (Pty) Ltd (PTM), on behalf of Platinum Group Metals Ltd, the issuer, to complete an Independent Amended and Restated Technical Report on Exploration Drilling supporting the October 21, 2014 public disclosure of the Updated drilling results for the combined Waterberg Joint Venture (JV) Project and the Waterberg Extension Project, two adjoining projects targeting a previously unknown extension to the northern limb of the Bushveld Complex which may have the potential for Platinum Group Metals (PGMs), gold and base metals (Cu, Ni).  This report complies with disclosure and reporting requirements set forth in the Toronto Stock Exchange Manual, National Instrument 43-101 Standards of Disclosure for Mineral Project (NI 43-101), Companion Policy 43-101CP to NI 43-101, and Form 43-101F1 of NI 43-101.

This report reviews and updates the geology, the exploration activities and states the mineral resource estimation (Effective date: 12 June 2014) on the project areas based on documentation related to the project, and discussions with project management up to 21 October 2014.

2.2Principal Sources of Information

The sources of information and data include both public domain data (conventional publications, “Open File” and Internet) and information gathered or otherwise acquired by PTM, which are not generally available in the public domain.  Where possible, published and/or generally available data on “Open File” in the Council of Geoscience, Pretoria, South Africa, was used.

The public domain sources and documents that were supplied by PTM are listed in Section 19 - References.

2.3Qualifications and Experience

Coffey is an integrated Australian-based consulting firm, which has been providing services and advice to the international mineral industry and financial institutions since 1987.  Coffey has maintained a fully operational office at Accra in Ghana since 1996, providing an operational base for consulting and contracting assignments throughout the West African region.  An additional African office was established in Johannesburg, South Africa, in 1999 to support expanding activities within southern and eastern portions of the continent.

The following persons were nominated to the project team and their specific areas of responsibility are shown below.  The qualifications and appropriate experience of the authors are detailed in the attached Authors’ Certificates.  Mr. K G Lomberg visited the Waterberg JV site on 16-18 April 2012, 16—18 August 2012, 21—22 August 2012, 13-15 January 2013 and 24 - 25 July 2013, 24 — 25 March 

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 15
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

2014,6 — 7 October 2014 and the Waterberg Extension site on 8 November 2013.  Mr. Goldschmidt visited site on 24 - 25 July 2013.

PTM personnel on site facilitated the technical review by providing documentation, overview presentations, field visits, access to the exploration and drilling already completed, and access to project databases.

The overall report was compiled by Mr. Lomberg and Mr. Goldschmidt.

Kenneth Lomberg, Principal Consultant Resources, Coffey — Southern Africa

Project management, site visits, geological review and interpretation, mineral resource estimation, report preparation.

Mr. Lomberg has the relevant experience to the type of deposit and resource estimation that is the subject of this report.  Mr. Lomberg has done consultant work on various projects on the Bushveld Complex including Aurora, Kransplaats, Bokoni Mine, Mecklenburg, Smokey Hills, Kalplats, Garatau, Kennedy’s Vale, Kalkfontein, Blue Ridge Mine, Eland Mine, Western Bushveld Joint Venture (WBJV), Palmietfontein, Stellite, Townlands and Tharisa.  Mr. Lomberg has assisted with approximately 15 of the estimated 20 Junior Platinum Exploration and Mining Companies in South Africa.  These assignments have ranged from listings documents, Due Diligences, CPRs, ITRs, feasibility studies, NI 43-101 compliant resource estimations and valuations.

Alan Goldschmidt, Senior Consultant Resources, Coffey — Southern Africa

Site visit, geological review and interpretation, mineral resource estimation, report preparation.

Mr. Goldschmidt has some 29 years experience in the minerals industry.  He has been involved in exploration and mine geology.  His expertise is project management, reserve, and resource estimation.  Primarily he has been involved with geological block modelling and geostatistical resource estimation, reserve, and resource estimation.

2.4Independence

Neither Coffey, nor the key personnel nominated for the completed and reviewed work, have any material interest in PTM or its mineral properties.  The proposed work, and any other work done by Coffey for PTM, is strictly in return for professional fees.  Payment for the work is not in any way dependent on the outcome of the work or on the success or otherwise of PTM’s own business dealings.  As such there is no conflict of interest in Coffey undertaking the Independent Qualified Person’s Report as contained in this document.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 16
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

3RELIANCE ON OTHER EXPERTS

This report was prepared as a National Instrument 43-101 Technical Report, in accordance with Form 43-101F1, for Platinum Group Metals  (Pty) Ltd (PTM), on behalf of Platinum Group Metals Ltd, the issuer, by Coffey Mining (South Africa) Pty Ltd (Coffey).  The quality of information and conclusions contained herein is consistent with the level of effort involved in Coffey’s services and based on:

i)Information available at the time of preparation by PTM,

ii)Previously completed and filed technical reports on the resource estimate titled: “Revised and Updated Mineral Resource Estimate for the Waterberg Platinum Project, South Africa” dated 2 September 2013 and “Amended and Combined Technical Report, Waterberg Joint Venture and Waterberg Extension projects, South Africa”  dated  9th December 2013.

iii)Third party technical reports prepared by Government agencies and previous tenement holders, along with other relevant published and unpublished third party information.

iv)This report is intended to be used by PTM, subject to the terms and conditions of its contract with Coffey.  This contract permits PTM to file this report as a Technical Report with Canadian Securities Regulatory Authorities pursuant to National Instrument 43-101, Standards of Disclosure for Mineral Projects.  Any other use of this report by any third party is at that party’s sole risk.

A final draft of this report was provided to PTM, along with a written request to identify any material errors or omissions, prior to lodgement.

Neither Coffey, nor the authors of this report, are qualified to provide extensive comment on legal facets associated with ownership and other rights pertaining to PTM’s mineral properties described in Section 4.  Coffey did not see or carry out any legal due diligence confirming the legal title of PTM to the properties.

Similarly, neither Coffey nor the authors of this report are qualified to provide extensive comment on environmental issues associated with PTM’s mineral properties, as discussed in Section 4.

Coffey relied upon Platinum Group Metals RSA (Pty) Ltd. in-house counsel and Exploration Manager for the information in respect of the Prospecting Permits and Environmental Permits.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 17
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

4PROPERTY DESCRIPTION AND LOCATION

4.1Property Description and Location

The Waterberg Project (PTM and JOGMEC Joint venture) is some 85km north of the town of Mokopane (formerly Potgietersrus) (Figure 4.1_1).  The exploration area comprises a number of prospecting rights.  Their status is tabled in Table 4.3_1.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 18
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

Figure 4.1_1

Location of the Waterberg JV and Waterberg Extension Project Properties on the Bushveld Complex

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 19
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

4.2Mining Tenure

A summary of the mineral exploration and mining rights regime for South Africa is provided in Table 4.2_1.  It should be noted that PTM have a Prospecting Right which allows them should they meet the requirements in the required time, to have the sole mandate to file an application for the conversion of the registered Prospecting Right to a Mining Right.

Table 4.2_1
Summary of Mineral Exploration and Mining Rights
(South Africa)

South Africa		Mineral Exploration and Mining Rights
Mining Act	:	Mineral and Petroleum Resources Development Act, No.  28 of 2002 (Implemented 1 May 2004)
State Ownership of Minerals	:	State custodianship
Negotiated Agreement	:	In part, related to work programmes and expenditure commitments.
Mining Title/Licence Types
Reconnaissance Permission	:	Yes
Prospecting Right	:	Yes
Mining Right	:	Yes
Retention Permit	:	Yes
Special Purpose Permit/Right	:	Yes
Small Scale Mining Rights	:	Yes
Reconnaissance Permission
Name	:	Reconnaissance Permission
Purpose	:	Geological, geophysical, photo geological, remote sensing surveys. Does not include “prospecting”, i.e. does not allow disturbance of the surface of the earth.
Maximum Area	:	Not limited.
Duration	:	Maximum 2 years.
Renewals	:	No and no exclusive right to apply for prospecting right.
Area Reduction	:	No.
Procedure	:	Apply to Regional Department of Mineral Resources.
Granted by	:	Minister.
Prospecting Right
Name	:	Prospecting Right.
Purpose	:	All exploration activities including bulk sampling.
Maximum Area	:	Not limited.
Duration	:	Up to 5 years.
Renewals	:	Once, for 3 years.
Area Reduction	:	No.
Procedure	:	Apply to Regional Department of Mineral Resources.
Granted by	:	Minister.
Mining Right
Name	:	Mining Right.
Purpose	:	Mining and processing of minerals.
Maximum Area	:	Not limited.
Duration	:	Up to 30 years.
Renewals	:	Yes, with justification.
Procedure	:	Apply to Regional Department of Mineral Resources.
Granted by	:	Minister.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 20
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

4.3Licence Status

The Waterberg JV Project and Waterberg Extension Project are defined by licence boundaries with differing status and ownership structure.  A summary of the prospecting rights and their status is summarised in Table 4.3_1 and their location on Figures 4.3_1 and 4.3_2

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 21
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

Table 4.3_1
Summary of Mineral Exploration and Mining Rights (South Africa)

Holder	DMR P R Reference	Hectares	Period of Prospecting Right	Minerals	Status	Status Details
PTM (JV)	1265 PR	15257.00 ha	2 September 2009 to 1 September 2012	PGM, Gold, Chrome, Nickel, Cobalt, Copper, Molybdenum, Rare Earths, Silver, Zinc and Lead	Granted	Renewal applied for and acknowledged by DMR — Renewal pending
PTM (JV)	10667 PR	6254.80 ha	2 October 2013 to 1 October 2018	PGM, Gold, Chrome, Nickel, Cobalt, Copper, Molybdenum, Rare Earths, Silver, Zinc and Lead	Granted	Notarially Executed on 2/10/2013
PTM (JV)	10809 PR		Applied for prospecting period of 5 years, which is the maximum in terms of section 16 MPRDA.	Vanadium and Iron	Accepted	Written acceptance by DMR on 28/05/2013
PTM (JV)	10668 PR	3953.05 ha	2 October 2013 to1 October 2018	PGM, Gold, Chrome, Nickel, Cobalt, Copper, Molybdenum, Rare Earths, Silver, Zinc and Lead	Granted	Notarially Executed on 2/10/2013
PTM (EXT)	10804 PR	26961.59 ha	Prospecting granted for 5 years with effect 2 October 2013 to 1 October 2018	PGM, Chrome, Copper, Gold, Nickel, Vanadium and Iron	Granted	Notarially Executed on 2/10/2013
PTM(EXT)	10805 PR	17734.80 ha	Prospecting granted for 5 years with effect 2 October 2013 to 1 October 2018	PGM, Chrome, Copper, Gold, Nickel, Vanadium and Iron	Granted	Notarially Executed on 2/10/2013.
PTM(EXT)	10805 PR — Section 102	4475.13 ha	Section 102 application when granted will have the same benefits as 10804 (prospecting right will be granted from 1/10/2013 to 2/10/2018)	PGM, Chrome, Copper, Gold, Nickel, Vanadium and Iron	Accepted	Written acceptance by DMR on 09/12/2013
PTM(EXT)	10806 PR	13143.53 ha	Applied for prospecting period of 5 years, which is the maximum in terms of section 16 MPRDA.	PGM	Accepted	Written Acceptance by DMR on 28/05/2013
PTM (EXT)	10810 PR	4189.86 ha	Prospecting granted for 5 years with effect 23 October 2013 to 22 October 2018	PGM, Chrome, Copper, Gold, Nickel, Vanadium and Iron	Granted	Notarially Executed on 23/10/2013
PTM(EXT)	11286 PR	19912.44 ha	Applied for prospecting period of 5 years, which is the maximum in terms of section 16 MPRDA.	PGM, Gold, Chrome, Nickel, Cobalt, Copper, Molybdenum, Rare Earths, Silver, Zinc and Lead, Vanadium, Iron	Accepted	Formal Acceptance by DMR on 05/06/2103

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 22

Coffey Mining South Africa (Pty) Ltd

Figure 4.3_1

Locations of the Waterberg Project Properties

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 23

Coffey Mining South Africa (Pty) Ltd

Figure 4.3_2

Location of the Waterberg Project Prospecting Rights

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 24

Coffey Mining South Africa (Pty) Ltd

4.4Holdings Structure

The Waterberg JV Project and the Waterberg Extension Project are managed and explored under the direction of separate technical committees and are currently planned for separate development according to the needs, requirements and objectives of the two distinct ownership groups.

Waterberg JV Project

PTM initially held a 74% share in the project with Mnombo Wethu (Pty) Ltd (Mnombo), a BEE partner, holding the remaining 26% share (Figure 4.4_1).

In October 2009, PTM entered an agreement with the Japanese Oil, Gas and Metals National Corporation (JOGMEC) and Mnombo whereby JOGMEC may earn up to a 37% interest in the project for an optional work commitment of US$3.2 million over 4 years, while at the same time Mnombo is required to match JOGMEC’s expenditures on a 26/74 basis.  PTM agreed to loan Mnombo their first $87,838 in project funding.  JOGMEC has completed the expenditure of their earn-in amount.

On November 7, 2011 the Company entered into an agreement with Mnombo whereby the Company will acquire 49.9% of the issued and outstanding shares of Mnombo in exchange for cash payments totalling R 1.2 million and paying for Mnombo’s 26% share of project costs to feasibility.  When combined with the Company’s 37% direct interest in the Waterberg JV Project (after JOGMEC earn-in), the 12.974% indirect interest to be acquired through Mnombo will bring the Company’s effective project interest to 49.974%.

Figure 4.4_1

Schematic Diagram of the Holdings of Waterberg JV Project

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 25

Coffey Mining South Africa (Pty) Ltd

During 2012, PTM made application to the DMR to acquire three additional prospecting rights adjacent to the west (one property of 3,938 ha), north (one property of 6,272 ha) and east (one property of 1,608 ha) of the existing Waterberg JV Project.  Upon grant by the DMR, these three new prospecting rights covering a total of 118km2 became part of the existing joint venture with JOGMEC and Mnombo, bringing the total area in the joint venture to 255km2.  Mnombo is carrying costs for the Feasibility Study in respect of the Waterberg JV Project.

Waterberg Extension Project

PTM holds a direct 74% share in the Waterberg Extension Project with Mnombo Wethu (Pty) Ltd (Mnombo), a BEE partner, holding the remaining 26% share.

On November 7, 2011 the Company entered into an agreement with Mnombo whereby the Company will acquire 49.9% of the issued and outstanding shares of Mnombo in exchange for cash payments totalling R 1.2 million and paying for Mnombo’s 26% share of project costs to feasibility.  When combined with the Company’s 74% direct interest in the Waterberg Extension Project, the 12.974% indirect interest to be acquired through Mnombo will bring PTM’s effective project interest to 86.974%.  In respect of the Waterberg Extension Project, PTM is currently accruing Mnombo’s cost share.

4.5Royalties and Agreements

Coffey is not aware of any royalties, back-in rights, payments or other encumbrances that could prevent PTM from carrying out its plans or the trading of its rights to its licence holdings at the Waterberg JV Project and Waterberg Extension Project.

4.6Environmental Liabilities

All environmental requirements on the properties are subject to the terms of a current Environmental Management Plan (EMP) approved by the Department of Minerals Resources (DMR) prior to commencement of work on the properties.  All rehabilitation of borehole sites and access roads required in terms of this EMP have been completed or are on-going.  In addition the required deposits into the approved environmental rehabilitation trust in respect of related potential liabilities are up to date.  There are no other known material environmental liabilities on the properties at this time.

All the necessary permissions and permits in terms of the environmental liabilities have been obtained.  There are no known encumbrances of an environmental nature that may restrict the exploration of the properties.

4.7Legal Access

PTM has consulted with the community and received permissions to access the land where it holds Prospecting Permit licences.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 26

Coffey Mining South Africa (Pty) Ltd

5ACCESSIBILITY, CLIMATE, LOCAL RESOURCES, INFRASTRUCTURE AND PHYSIOGRAPHY

5.1Access

The shared boundary of the Waterberg JV Project and Waterberg Extension Project is located some 85km north of the town of Mokopane (formerly Potgietersrus) in Seshego and Mokerong, districts of the Limpopo Province.  Mokopane provides a full spectrum of local and urban infrastructure.

The Waterberg JV Project is situated some 13.5km from the N11 national road that links Mokopane with the Grobblers Bridge border post to Botswana.  The current drilling area is some 32km from the N11 National Road.  Access to the area from the national road is by unpaved roads that are generally in a reasonable condition.

The Waterberg Extension Project is situated some 18.5km from the N11 national road that links Mokopane with the Grobblers Bridge border post to Botswana.  The current drilling area is some 38km to 45km from the N11 National Road.  Access to the area from the national road is by unpaved roads that are generally in a reasonable condition.

5.2Climate

The climate is semi-arid with moderate winter temperatures and warm to hot in the summer.  The majority of the 350-400mm of average annual rainfall occurs in the period November to March.  Climatic conditions have virtually no impact on potential mining operations in the project area.  Mining and exploration activities can continue throughout the year.

5.3Physiography

The project area to the west and east is relatively flat but the area in the central part of the project area is more mountainous with some steep near vertical cliffs and an elevation difference of 160 - 200m (Figure 5.3_1)  The lowest point in the project area is at 880m amsl and the highest point at 1,365m amsl.  The drilling has been undertaken on the eastern flat area with an elevation of approximately 1,000m amsl.  The area is farmed by the local people who grow crops on a limited scale and farm various cattle.  The vegetation is typically bushveld vegetation.  The Seepabana River cuts across the southwestern side of the Waterberg JV Project area from east to west joining the Molagakwena River which flows north into the Glen Alpine Dam.  The remainder of the area has non-perennial rivers.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 27

Coffey Mining South Africa (Pty) Ltd

Figure 5.3_1

Photograph looking towards the Eastern side of the Waterberg JV Project

5.4Local Resources and Infrastructure

Mining services and recruitment are readily available from Mokopane which has a long history of mining with the Mogalakwena Mine, formerly Potgietersrus Platinum Mine (Anglo Platinum), situated north of the town.  Furthermore, drilling contractors, mining services and consultants are readily sourced within the greater Gauteng area.

Power, sewage and water infrastructure are poorly developed in this area.  The infrastructural requirements of a mine would require additional planning to provide suitable infrastructure to the site.  The current activity in the area is in the form of local people undertaking small scale farming on a subsistence basis for cattle and crops.  The major restriction is water although the Glen Alpine dam is located 2km to the northwest of the project area and 23km northwest of the area of current activity and 10km to the west of the Waterberg Extension Project.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 28

Coffey Mining South Africa (Pty) Ltd

6HISTORY

Waterberg JV Project

The Waterberg JV Project is a part of a group of exploration projects that came from a regional target initiative of the Company over the past two years.  Platinum Group Metals targeted this area based on its own detailed geophysical, geochemical and geological work along trend, off the north end of the mapped northern limb of the Bushveld Complex.

Waterberg Extension Project

The permits for the Waterberg Extension Project properties were applied for based on the initial findings on the adjacent Waterberg JV Project combined with an analysis of publicly available regional government geophysical data that showed an arching NNE tend to the signature of the interpreted edge of the Bushveld Complex.

6.1Ownership History

PTM developed the exploration concept for the Waterberg JV Project and filed for a Prospecting Right application which was granted in 2009.  In October 2009, PTM entered an agreement with JOGMEC and Mnombo whereby JOGMEC may earn up to a 37% interest in the project for an optional work commitment of US$3.2 million over 4 years on the Waterberg JV Project only.  It is a condition that over the same time period Mnombo is required to match JOGMEC’s expenditures on a 26/74 basis.  PTM agreed to loan Mnombo their first $87,838 in project funding.  JOGMEC has completed their earn-in expenditure in 2012.  This only applies to the Waterberg JV Project.  JOGMEC has no interest or association with the Waterberg Extension Project.

On November 7, 2011 the Company entered into an agreement with Mnombo whereby the Company will acquire 49.9% of the issued and outstanding shares of Mnombo in exchange for cash payments totalling R 1.2 million and paying for Mnombo’s 26% share of project costs to feasibility.  When combined with the Company’s 37% direct interest in the Waterberg JV Project (after JOGMEC earn-in), the 12.974% indirect interest to be acquired through Mnombo will bring the Company’s effective project interest to 49.974%.

The Waterberg Extension Project Licences were applied for separately and at a later date with PTM having a direct 74% interest and Mnombo retaining the remaining 26%.

6.2Exploration History

Previous work that has been conducted over the property was the regional mapping by the Council for Geoscience as presented on the 1:250,000 scale — Map No 2328 — Pietersburg.  This sheet is the published geological map of the area and the basis for the metallurgical sheets, as well as regional aeromagnetic and gravity surveys that now form part of the public domain dataset.

There is no publically available detailed exploration history available for the area.  As a result of the cover on the Bushveld Complex there is no record of specific exploration for platinum group metals and the extensive exploration for platinum group metals on the Platreef targets to the south did not extend this far north.  There are undocumented reports of a borehole through the

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 29

Coffey Mining South Africa (Pty) Ltd

Waterberg Group into the Bushveld Complex on a farm immediately north of the Waterberg JV Project and immediately west of the Waterberg Extension Projects.

The original exploration models for the property involved a potential for paleo placer at the base of the Waterberg Group sediments or an embayment to the west.  Both of these models have been discarded with the current discovery and drilling data showing a strike to the north northeast.

Since previous mineral resource estimates and at the drilling cut-off date for the mineral resource estimate (31 May 2014), new borehole intersections are available in both the Waterberg JV Project and in the property Early Dawn 361LR in the south eastern portion of the Waterberg Extension Project.  Early Dawn 361LR is just north of the property Goedetrouw 386LR of the Waterberg JV Project area.  On the Waterberg JV Project a total of 307 intersection points have been drilled.  NQ core size (47.6mm) has been drilled.

Twenty four boreholes have been drilled on the Waterberg Extension Project (56 intersections).  Where possible, a basic 250m x 250m drilling grid has been used.

6.3Mineral Resource History — Waterberg JV Project

6.3.1September 2012

The initial mineral resource was declared for the T- and F - Zone mineralization and is confined to only the property Ketting 368LR of the Waterberg JV Project.  Data from the drilling completed by PTM to September 2012 were used to undertake a mineral resource estimate from over 58 intersections representing 27 boreholes.  The data and the geological understanding and interpretation were considered of sufficient quality for the declaration of an inferred mineral resource classification.  The resource estimate has been classified based on the criteria set out in Table 6.3.1_1.  This estimate was presented in a NI 43-101 in September 2012 by Mr. KG Lomberg, entitled “Exploration Results and Mineral Resource Estimate for the Waterberg Platinum Project, South Africa.  (Latitude 23° 21’ 53”S, Longitude 28° 48’ 23”E)”.

The borehole intersections were composited for Pt, Pd, Au, Cu and Ni.  A common seam block model was developed into which the estimate was undertaken.  An inverse distance weighted (power 2) was undertaken using the 3D software package CAE Mining Studio™.

Geological loss of 25% was estimated based on the knowledge of the deposit.  The geological losses are made up of areas of where the layers are absent due to faults, dykes, potholes and mafic/ultramafic pegmatites.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 30

Coffey Mining South Africa (Pty) Ltd

Table 6.3.1_1

Waterberg JV Project-

Mineral Resource Estimate; 1 September 2012

	Strati- graphicThickness	TonnageMt	Pt (g/t)	Pd (g/t)	Au (g/t)	2PGE+Au (g/t)	Pt:Pd:Au	2PGE+Au (koz)	Cu (%)	Ni (%)
T1	2.85	10.49	0.77	1.27	0.51	2.55	30:50:20	863	0.17	0.10
T2	3.46	16.25	1.10	1.82	0.92	3.84	29:47:24	2,001	0.18	0.09
T Total	3.19	26.74				3.33	29:48:23	2,864
FH	4.63	18.10	0.80	1.48	0.09	2.37	34:62:4	1,379	0.03	0.12
FP	5.91	23.20	1.01	2.00	0.13	3.14	32:64:4	2,345	0.04	0.11
F Total	5.27	41.30				2.80	31:57:12	3,724
Total	4.19	68.04	0.94	1.71	0.37	3.01		6,588
Content (koz)			2,049	3,733	806	—

6.3.2February 2013

An updated mineral resource was declared for the T- and F - Zone mineralization and confined to only the properties Ketting 368LR and Goedetrouw 366LR of the Waterberg JV Project.  Data from the drilling completed by PTM to February 2013 were used to undertake a mineral resource estimate from 207 intersections representing 40 boreholes.  The data and the geological understanding and interpretation were considered of sufficient quality for the declaration of an inferred mineral resource classification.  The resource estimate has been classified based on the criteria set out in Table 6.3.2_1.  This estimate was presented in a NI 43-101 in February 2013 by Mr. KG Lomberg, entitled “Revised and Updated Mineral Resource Estimate for the Waterberg Platinum, South Africa (Latitude 23° 21’ 53”S, Longitude 28° 48’ 23”E)”.

The borehole intersections were composited for Pt, Pd, Au, Cu and Ni.  A common seam block model was developed into which the estimate was undertaken.  An inverse distance weighted (power 2) was undertaken using the 3D software package CAE Mining Studio™.

Geological loss of 25% was estimated based on the knowledge of the deposit.  The geological losses are made up of areas of where the layers are absent due to faults, dykes, potholes and mafic/ultramafic pegmatites.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 31

Coffey Mining South Africa (Pty) Ltd

Table 6.3.2_1

Waterberg JV Project-

Mineral Resource Estimate; 1 February 2013

	Strati- graphicThick- ness	TonnageMt	Pt (g/t)	Pd (g/t)	Au (g/t)	2PGE+Au (g/t)	Pt:Pd:Au	2PGE+ Au (koz)	Cu (%)	Ni (%)
T1	2.58	4.33	0.91	1.37	0.52	2.80	32:49:19	390	0.21	0.11
T2	4.08	25.46	1.07	1.87	0.78	3.72	29:50:21	3,045	0.17	0.09
T Total	3.76	29.78	1.05	1.79	0.75	3.59	29:50:21	3,435	0.18	0.09
FH	4.02	7.19	1.09	2.37	0.20	3.66	30:65:6	847	0.10	0.22
FP	5.46	55.95	1.01	2.10	0.14	3.25	31:65:4	5,838	0.06	0.16
F Total	5.24	63.15	1.02	2.13	0.15	3.29	31:65:4	6,685	0.06	0.17
Total	4.63	92.93	1.03	2.02	0.34	3.39	30:60:10	10,120
Content (koz)			3,071	6,040	1,009

6.3.3September 2013

Waterberg JV Project

A mineral resource was declared for the T- and F - Zone mineralization and confined to only the properties Ketting 368LR and Goedetrouw 366LR of the Waterberg JV Project.  Data from the drilling completed by PTM to 1August 2013 was used to undertake a mineral resource estimate from 337 intersections representing 112 boreholes.  The data and the geological understanding and interpretation were considered of sufficient quality for the declaration of an inferred mineral resource classification.  The resource estimate has been classified based on the criteria set out in Table 6.3.3_1.  This estimate was presented in a NI 43-101 inSeptember 2013 by Mr. KG Lomberg and Mr. AB Goldschmidt; entitled “Revised and Updated Mineral Resource Estimate for the Waterberg Platinum Project, South Africa”.

The borehole intersections were composited for Pt, Pd, Au, Cu and Ni.  A common seam block model was developed into which the estimate was undertaken.  An inverse distance weighted (power 2) was undertaken using the 3D software package CAE Mining Studio™.

Geological loss of 12.5% was estimated based on the knowledge of the deposit.  The geological losses are made up of areas of where the layers are absent due to faults, dykes, potholes and mafic/ultramafic pegmatites.

Waterberg Extension Project

A mineral resource estimate had not been declared for the Waterberg Extension Project.  There was insufficient drilling completed to support a resource estimate in September 2013.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 32

Coffey Mining South Africa (Pty) Ltd

Table 6.3.3_1

Waterberg JV Project-

Mineral Resource Estimate

2 September 2013

	Strati- graphicThick- ness	TonnageMt	Pt (g/t)	Pd (g/t)	Au (g/t)	2PGE+ Au (g/t)	Pt:Pd:Au	2PGE+ Au (koz)	Cu (%)	Ni (%)
T1 (Cut- off=2g/t)	2.30	8.5	1.04	1.55	0.47	3.06	34:51:15	842	0.17	0.10
T2	3.77	39.2	1.16	2.04	0.84	4.04	29:51:21	5,107	0.18	0.10
T Total	3.38	47.7	1.14	1.95	0.77	3.86	30:51:20	5,948	0.18	0.10
F (Cut- off=2g/t)		119.0	0.91	1.98	0.13	3.02	30:65:4	11,575	0.07	0.17
Total		166.7	0.98	1.97	0.32	3.26	30:60:10	17,523	0.10	0.15
Content (koz)			5,252	10,558	1,715

Cut-off applied on 2PGE+Au grade

6.4Production History

There has been no production from the Waterberg JV Project or Waterberg Extension Project.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 33

Coffey Mining South Africa (Pty) Ltd

7GEOLOGICAL SETTING AND MINERALIZATION

7.1Regional and Local Setting

The stable Kaapvaal and Zimbabwe Cratons in southern Africa are characterised by the presence of large mafic to ultramafic layered complexes, the best known of which are the Great Dyke in the Zimbabwe Craton and the Bushveld and Molopo Complexes in the Kaapvaal Craton.  By far the largest, best-known and economically most important of these is the Bushveld Complex (Figure 7.1_1), which was intruded about 2,060 million years ago into rocks of the Transvaal Supergroup, largely along an unconformity between the Magaliesberg quartzite of the Pretoria Group and the overlying Rooiberg felsites.  The total estimated extent of the Bushveld Complex is some 66,000 km2, of which about 55% is covered by younger formations.  The mafic rocks of the Bushveld Complex host layers rich in Platinum Group Metals (PGM), chromium and vanadium, and constitute the world’s largest known resource of these metals.

The Waterberg JV Project and Waterberg Extension Project are situated off the northern end of the previously known northern limb, where the mafic rocks have a different sequence to those of the eastern and western limbs.  Furthermore the Bushveld rocks transgress the Transvaal Supergroup from the Smelterskop and Magaliesberg formations in the south to the ironstones of the Penge formation further north, the dolomites of the Malmani Subgroup, and eventually resting on the Turfloop granite in the north (Vermaak and Van der Merwe, 2000).

The Bushveld Complex in the Waterberg JV Project and Waterberg Extension Project area has intruded across a pre-existing craton scale lithological and structural boundary between two geological zones.  The known northern limb has a north - south orientation to the edge contact that makes an abrupt strike change to the northeast coincident with projection of the east-west trending Hout River Shear system, a major shear that marks the southern boundary of the South Marginal Zone (SMZ).  The SMZ is a 3500Ma aged compressional terrain formed within the Kaapvaal Craton during the collision with the Zimbabwe Craton.  It is comprised of granulite facies granitic gneiss, amphibolitic gneiss and minor quartzite.  Within the SMZ there are several major shears that trend parallel the Hout River Shear (van Reenen, 1992) and trend through the Waterberg Extension Project area (Figure 7.1_1).  The footwall to the Bushveld on Waterberg Project is interpreted to be comprised of facies of the SMZ.

The geology of the northern limb of the Bushveld Complex is characterised by the existence of the platiniferous Platreef which was first described by Van der Merwe (Van der Merwe, 1976).  The Platreef is typically a wide pyroxenite hosted zone (up to 100s of metres), of elevated Cu and Ni mineralization with associated anomalous PGM concentrations.  The sulphide mineralization is typically pyrrhotite, chalcopyrite and pentlandite.  It has been postulated that the interaction with the basement rocks and in particular the dolomites has been instrumental in the formation of the mineralization (Vermaak and Van der Merwe, 2000).

The Waterberg JV Project and Waterberg Extension Project are an extension of the northern limb of the Bushveld Complex.  The mineralized layers are considered have a different setting to the Platreef.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 34

Coffey Mining South Africa (Pty) Ltd

Figure 7.1._1

Geological Map of the Bushveld Complex
Showing the Location of the Waterberg JV and Waterberg Extension Projects

Source: After Cawthorn et al 2006

7.1.1Bushveld Complex Stratigraphy

The mafic rocks (collectively termed the Rustenburg Layered Suite (RLS)) can be divided into five zones known as the Marginal, Lower, Critical, Main and Upper Zones from the base upwards (Figure 7.1.1_1).

The Marginal Zone is comprised of generally finer grained rocks than those of the interior of the Bushveld Complex and contains abundant xenoliths of country rock.  It is highly variable in thickness and may be completely absent in some areas and contains no known economic mineralization.

The Lower Zone is dominated by orthopyroxenite with associated olivine-rich cumulates in the form of harzburgites and dunites.  The Lower Zone may be completely absent in some areas.

The Critical Zone is characterised by regular and often fine-scale rhythmic, or cyclic, layering of well-defined layers of cumulus chromite within pyroxenites, olivine-rich rocks and plagioclase-rich rocks (norites, anorthosites etc).  The economically important PGM deposits are part of the Critical Zone.

The Critical Zone hosts all the chromitite layers of the Bushveld Complex, of which up to 14 have been identified.  The first important cycle is the Upper Group Chromitite Layer (UG1 Chromitite Layer and UG2 Chromitite Layer).  The UG1 Chromitite Layer, which is the lower unit, consists of a chromitite layer and underlying footwall chromitite layers that are interlayered with anorthosite.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 35

Coffey Mining South Africa (Pty) Ltd

The most important of the chromite cycles for PGM mineralization is the upper unit, the UG2 Chromitite Layer, which averages some 1m in thickness.

Underlying the UG Chromitite Layers are the Middle Group Chromitite Layers which consists of four groups of chromitite layers with an overall thickness of 15 – 80m.

The two uppermost units of the Critical Zone are the Merensky and Bastard units.  The former is also of great economic importance as it contains at its base the PGM-bearing Merensky Reef, a feldspathic pyroxenitic assemblage with associated thin chromitite layers that rarely exceeds 1m in thickness.  The top of the Critical Zone is generally defined as the top of the robust anorthosite (the Giant Mottled Anorthosite) that forms the top of the Bastard cyclic unit.

The Critical Zone may be subdivided into the Upper and Lower Critical Zones based on the last appearance of cumulus feldspar.  This boundary is considered to be between the Upper and Middle Group Chromitite Layers.

The economically viable chromite reserves of the Bushveld Complex, most of which are hosted in the Critical Zone, are estimated at 68% of the world’s total, whilst the Bushveld Complex also contains 56% of all known platinum group metals.  The Merensky Reef, which developed near the top of the Critical Zone, can be traced along strike for 280km and is estimated to contain 60,000t of PGM to a depth of 1,200m below surface.  The pyroxenitic Platreef mineralization, north of Mokopane (formerly Potgietersrus), contains a wide zone of more disseminated style platinum mineralization, along with higher grades of nickel and copper than occur in the rest of the Bushveld Complex.

The well-developed Main Zone consists of norites grading upwards into gabbronorites.  It includes several mottled anorthosite layers in its lower sector and a distinctive pyroxenite layer two thirds of the way up, termed the Pyroxenite Marker.

The base of the overlying Upper Zone is defined by the first appearance of cumulus magnetite above the Pyroxenite Marker.  In all, 25 layers of cumulus magnetite punctuate the Upper Zone, the fourth (Main Magnetite layer) being the most prominent.  This is a significant marker, some 2m thick, resting upon anorthosite, and is exploited for its vanadium and titanium content in the eastern and western limbs of the Bushveld Complex.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 36

Coffey Mining South Africa (Pty) Ltd

Figure 7.1.1_1

Waterberg JV Project

Generalised Stratigraphic Columns of the Eastern and Western Limbs compared to the Stratigraphy of The Northern Limb of the Bushveld Complex.

7.1.2The Northern Limb

The northern limb is a slightly sinuous, north-south striking sequence of igneous rocks of the Bushveld Complex with a length of 110km and a maximum width of 15km (Figures 7.1.2_1 and 7.1.2_2).  It is generally divided up into three different sectors namely the Southern, Central and Northern sectors which have characteristic footwalls:-

·The Southern Sector is characterised by a footwall of the Penge Formation of the Transvaal Supergroup

·The Central Sector generally has a footwall of Malmani Subgroup and

·The Northern Sector has a footwall consisting of Archaean granite

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 37

Coffey Mining South Africa (Pty) Ltd

Figure 7.1.2_1

General Geology of the northern limb of the Bushveld Complex

Source: Sharman-Harris (2006)

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 38

Coffey Mining South Africa (Pty) Ltd

Figure 7.1.2_2

Geology of the northern limb of the Bushveld Complex showing the Various Footwall Lithologies

                                Source: Sharman-Harris (2006)

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 39

Coffey Mining South Africa (Pty) Ltd

7.1.3The Platreef and its Mineralization

In the northern limb of the Bushveld Complex, the Lower and the Critical Zones of the Bushveld Complex are poorly developed.  Where the Bushveld Complex is in contact with the Archaean granite and sediments of the Transvaal Supergroup floor rocks the Platreef is developed.  The contact between the RLS and footwall rocks in the northern limb is transgressive, with the Platreef in contact with progressively older rocks of different lithologies from south to north.

The Platreef is a series of pyroxenites and norites, containing xenoliths/rafts of footwall rocks.  It is irregularly mineralized with PGM, Cu and Ni.  The Platreef (senso stricto) has a strike extent of some 30km, whereas Platreef-style mineralization occurs over the 110km strike length of the northern limb (Kinnaird et al, 2005).  The Platreef varies from 400m thick in the south of the northern limb to <50m in the north.  The overall strike is northwest or north, with dips 40–45° to the west at surface with the dip becoming shallower down dip.  The overall geometry of the southern Platreef appears to have been controlled by irregular floor topography.

The Platreef is also a highly geochemically variable unit, with research suggesting that lateral variations in the geochemistry of the Platreef are the result of interaction with and incorporation of different types of footwall rock.  The Platreef consists of a complex assemblage of pyroxenites, serpentinites and calc-silicates.  The nature of these rocks is related to interaction of the Bushveld magma with the lime-rich floor rocks which resulted in the formation of abundant lime-rich minerals (calc-silicates) as well as the serpentinization of the overlying pyroxenites.  Base metal and PGM concentrations are found to be highly irregular, both in value as well as in distribution.  The mineralization in places reaches a thickness of up to 40m.

Lithologically, the southern Platreef is heterogeneous and more variable than sectors further north and, although predominantly pyroxenitic, includes dunites, peridotites and norite cycles with anorthosite in the mid to upper portion.  Zones of intense serpentinisation may occur throughout the package.  Country rock xenoliths, <1,500m long, are common.  In the south these are typically quartzites and hornfels (metamorphosed banded ironstones, shales, mudstones and siltstones) whereas further north dolomitic or calcsilicate xenoliths also occur.

Faults offset the strike of the Platreef: a north–south, steeply dipping set is predominant with secondary east-northeast and east-southeast sets dipping 50–70°S.  The fault architecture was pre-Bushveld and also locally controlled thickening and thinning of the succession.

Although the major platinum group minerals consist of PGM tellurides, platinum arsenides and platinum sulphides, there appears to be a link between the rock type and the type of platinum group minerals with the serpentinites being characterised by a relative enrichment in sperrylite (PtAs2), the upper pyroxenites generally being characterised by more abundant PGM sulphides and alloy (Schouwstra et al 2000).  PGM alloys typically dominate the mineralization closer to the floor rocks.  Sulphides may reach >30% in some intersections.  These are dominated by pyrrhotite, with lesser pentlandite and chalcopyrite, minor pyrite and traces of a wide compositional range of sulphides.  The presence of massive sulphides is localised, commonly, but not exclusively towards the contact with footwall metasedimentary rocks.  The magmatic sulphides are disseminated or have a net-texture with a range of a few microns to 2cm sized grains.  Much of the sulphide mineralization is associated with intergranular plagioclase, or quartz-

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 40

Coffey Mining South Africa (Pty) Ltd

feldspar symplectites, along the margins of rounded cumulus orthopyroxenes.  The PGMs in the southern sector occur as tellurides, bismuthides, arsenides, antimonides, bismuthoantimonides and complex bismuthotellurides.  PGM are rarely included in the sulphides but occur as micron-sized satellite grains around interstitial sulphides and within alteration assemblages in serpentinized zones.  The Pt:Pd ratio ±1 with the PGM concentration not necessarily linked to either the sulphur or base metal abundance.

In the southern sector, mineralized zones have grades of 0.1–0.25% Cu and 0.15–0.36% Ni.

7.2Waterberg Group /Bushveld Complex Age Relationship

The age relationship of the Waterberg Group and the Bushveld Complex was re-examined as a result of this data.

Conventional understanding is that the Bushveld Complex is dated at 2,060Ma.  The Waterberg Group is dated at 1,879 – 1,872Ma based on dolerite intrusions into the upper strata.  Other references in the literature are made to the relationship:

·An unconformity resting on rocks including the Bushveld granites and mafic rock of the Bushveld (Barker et al, 2006)

·The Swaershoek Formation which is at the base of the Nylstroom Subgroup is reported to be deposited penecontemporaneous with the Bushveld granites (Barker et al, 2006)

·The Nebo Granite which are recognised to form the roof to the Bushveld

·The SHRIMP U-Pb dating of the Waterberg Group suggests that quartz porphyry lavas near the base have ages between 2,054±4Ma and 2,051±8Ma.  It has been interpreted that sedimentation began immediately after the intrusion of the Bushveld Complex (Dorland et al., 2006).

In this context the relationship has been examined by Prof TS McCarthy of The University of the Witwatersrand (October 2012).  The field relationships in the vicinity of the Waterberg JV Project were noted to indicate that the Bushveld Complex is unconformably overlain by the sandstones of the Setlaole Formation of the Waterberg Group, which is post-Bushveld in age.  The core drilling undertaken by PTM shows that an angular unconformity exists between the Waterberg Group and underlying Bushveld Complex.

The contact between the Waterberg Group and the weathered Bushveld Complex has been observed in the borehole core to generally be sharp.  In several of the drill intersections, conglomerate and grit horizons are developed on the contact and appear to contain altered magnetite, suggesting the development of placer mineralization.  If present, such mineralization is likely to be channelized, as the basal deposits appear to be fluvial.  The unusual contact zone between the two rock units was examined by Prof McCarthy and is interpreted as a palaeosol (fossilized soil) developed on the Bushveld gabbros.  Features in the palaeosol are reminiscent of modern weathering of Bushveld rocks were observed.  The weathering is considered typically spheroidal in character and culminates in a very fine-grained upper black turf layer (vertisol), corresponding to the ‘shale’ in the drill intersections.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 41

Coffey Mining South Africa (Pty) Ltd

The nature of the relationship between the Waterberg Group and the Bushveld Complex is confirmed as having no bearing on the presence of mineralization in the gabbros (T or F - Zones) (McCarthy, 2012).

Further to this Prof McCarthy observed that the northern extremity of the northern limb of the Bushveld Complex contains a well developed Platreef horizon, but in addition has mineralization developed in the Upper Zone.  The T - Zone has a high Cu/Ni ratio and is Pd and Au dominated.  Sulphides similar to this have been described previously from the Upper Zone, but occur in very small quantities, suggesting that atypical conditions pertain in the project area (McCarthy, 2012).  In addition, the layered sequence in the north is underlain by quartzite which appears to be a correlative of the upper Pretoria Group.  This being the case, Prof McCarthy considers that there is the potential for the development of a fairly extensive Bushveld sub-basin beneath the Waterberg which is also supported by a local gravity high in the area.

7.3Project Geology

The Waterberg JV and Waterberg Extension Projects are adjoining projects located along the strike extension of the Bushveld Complex (Figure 7.3_1).

Waterberg JV Project

The Waterberg JV Project consists predominantly of the Bushveld Main Zone gabbros, gabbronorites, norites, pyroxenites and anorthositic rock types with more mafic rock material such as harzburgite and troctolites that partially grade into dunites towards the base of the package.  In the southern part of the project area, Bushveld Upper Zone lithologies such as magnetite gabbros and gabbronorites do occur as intersected in borehole WB001 and WB002.  The Lower Magnetite Layer of the Upper Zone was intersected on the south of the project property (Disseldorp) where borehole WB001 was drilled and intersected a 2.5m thick magnetite band.

A general dip of 34º - 38º towards the west is observed from borehole core for the layered units intersected on Waterberg property within the Bushveld Package (Figure 7.3_2).  However, some blocks may be tilted at different angles depending on structural and /or tectonic controls.  And generally the Bushveld package strikes south-west to north-east

The Bushveld Upper Zone is overlain by a 120m to 760m thick Waterberg Group which is a sedimentary package predominantly made up of sandstones, and within the project area the two sedimentary formations known as the Setlaole and Makgabeng Formations constitute the Waterberg Group.  The Waterberg package is flat lying with dip angles ranging from to 2º to 5º.

The base of the Bushveld Main Zone package is marked by the presence of a transitional zone that constitutes a mixed zone of Bushveld and altered sediments/quartzites before intersecting the Transvaal Basement Quartzite and Metasediments.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 42

Coffey Mining South Africa (Pty) Ltd

Figure 7.3_1

Geology of the Waterberg Project

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 43

Coffey Mining South Africa (Pty) Ltd

Structurally, the area has abundant intrusives in the form of thick dolerite, diorite and granodiorite sills or dykes predominantly in the Waterberg package.  A few thin sills or dykes were intersected within the Bushveld package.  Faults have been interpolated from the aerial photographs, geophysics and sectional interpretation and drilling.  The faults generally trend (east-west across the property and some are north-west and south-west trending (Figure 7.3_1).

Figure 7.3_2

Section Showing Geology at Waterberg Project

Waterberg Extension Project

The project geology in the southern portion of the Waterberg Extension Project appears to be similar to the adjoining Waterberg JV Project to the southwest.  However, due to the widely spaced drilling further north on the Waterberg Extension Project there is limited information on the nature of the Bushveld stratigraphy.

Borehole intercepts to date of the Bushveld Complex at the Waterberg Extension Project consists predominantly of Main Zone gabbros, gabbronorites, norites, pyroxenites and anorthositic rock types with more mafic rock material such as harzburgite and troctolites that partially grade into dunites towards the base of the package.  In the southern part of the project area, Bushveld Upper Zone lithologies such as magnetite gabbros and gabbronorites have not been noted in drill core

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 44

Coffey Mining South Africa (Pty) Ltd

to date but given the geometry of the intrusive suite may sub-outcrop below the Waterberg Group further west on the Property. 

A general dip of the layers in the Bushveld Complex rocks of 25º - 38º towards the west is observed from the geometry from borehole logging (Figure 7.3_2).  However, some blocks may be tilted at different angles depending on structural and /or tectonic controls.  Generally the Bushveld layered package strikes south-west to north-east in the southern 5km part of the Project area and then appears to turn to a more north-south strike direction.  This change in strike direction loosely corresponds to the western strike projection of a major shear within the SMZ.

The Bushveld Complex as intersected to date in the Project area is overlain by a minimum 300m of Waterberg Group which is a sedimentary package predominantly made up of sandstones.  The two sedimentary formations known as the Setlaole and Makgabeng Formations constitute the Waterberg Group within the Project area.  The Waterberg package is flat lying with dip angles ranging from to 2º to 5º.

The base of the Bushveld Main Zone package is marked by the presence of a transitional zone that constitutes a mixed zone of Bushveld with gneiss and/or altered sediments/quartzites before intersecting the Basement Gneiss, quartzite/ metasediments and lithologies of the SMZ mobile belt lithologies consisting of granulite facies gneiss, mafic gneiss and a later pegmatoidal pink granitoid.  SMZ rocks are mapped on surface to within 1km east of the intrusive edge before being covered by Waterberg Group.  The nature of the basement rock on the Waterberg Extension Project is currently being studied in the context of regional geology.

Structurally, faults have been interpolated from the aerial photographs, airborne geophysical surveys and geological interpretation from drilling and regional mapping projects (Van Reenen, 1992).  The faults generally trend east-west across the property and some are north-west and south-west trending (Figure 7.3_3).  Two major shear zones from the SMZ project into the Project area; the Matok Shear and the Petronella Shear (Van Reenen, 1992).  These structures were pre-existent to the intrusion of the Bushveld Complex and are interpreted to play a role in the geometry of the intrusive chamber and mineralized layers.

There is a general increase in the frequency of late intrusive rocks in the form of dolerite, diorite and granodiorite dykes predominantly in the Waterberg package.  A few thin sills or dykes were intersected within the Bushveld package.  The dolerite dykes have a variable positive magnetic response and have been modelled in 3D from the detailed airborne magnetic data as being vertical to a minimum depth of 300m.  Field mapping confirms the vertical nature of the dykes and recessive weathering nature on surface.  The sills and dykes are of similar composition however, the interrelation of the two is currently not known.  Many of the east-west dykes appear to have exploited pre-existing structures such as major shears and faults.

A flat lying granodiorite sill with average thicknesses of 80m appears to be exploiting the contact between the Bushveld Complex igneous rocks and the overlying Waterberg sedimentary rocks (Figure 7.3_3).  This sill as seen in borehole intercepts displays both an upper and lower chill margin indicating post Waterberg emplacement.  The sill outcrops to the east of the projected edge of the Bushveld and forms low, flat top hills.  Using the depth of the sill intersections in

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 45

Coffey Mining South Africa (Pty) Ltd

drilling and the surface outcrop pattern to the east there appears to be a kink in the dip of sill at or near the projected Bushveld edge that explains the vertical difference in the position of the sill between surface and downhole.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 46

Coffey Mining South Africa (Pty) Ltd

Figure 7.3_3

Geology of the Waterberg Extension Project

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 47

Coffey Mining South Africa (Pty) Ltd

7.3.1Stratigraphy

The initial phase of diamond exploration drilling (WB001 and WB002) on the Waterberg JV Project intersected Waterberg Group Sediments (sandstones) and Bushveld Upper Zone and Main Zone lithologies in the western portion of Disseldorp property.  The follow-up drilling campaign revealed a generalised schematic stratigraphic section that has been adopted for use in this property as presented in Figure 7.3.1_1.

The initial phase of diamond exploration drilling on Waterberg Extension Project has intercepted similar stratigraphy to the adjacent and contiguous Waterberg JV Project to the south.  Generally, the layers correlate well between the projects and at Waterberg Extension Project initial drilling has intersected Waterberg Group Sediments (sandstones) and Bushveld Complex Main Zone lithologies in the southern portion of the farm Early Dawn.

Floor Rocks

The floor rocks underlying the Transitional zone are predominantly granite gneiss hosting remnants of magnetite quartzite, metaquartzite, metapelites, serpentinites and metasediments.  Some boreholes within the project area have shown dolerite intrusions within the floor rocks, such as borehole WB028.  Pink pegmatoidal granite was noted in the Basement of one borehole on the Waterberg Extension Project.

Bushveld Complex

Igneous Bushveld Complex lithologies underlie the Waterberg Group starting with the Upper Zone and underlain by the Main Zone.

The Main Zone

The Main Zone which hosts the PGM mineralized layers in its cyclic sequences of mafic and felsic rocks, is 150m to 900m thick.  It is predominantly composed of gabbronorite, norite, pyroxenite, harzburgite, troctolite with occasional anorthositic phases

Abundant alteration occurs in these lithologies including chloritisation, epidotisation and serpentinisation.  Parts of the F - Zone are magnetic due to the serpentinisation of the olivines.  The F - Zone forms the base of the Main Zone, and it is usually underlain by a transitional zone of intermixed lithologies such as metasediments, metaquartzite / quartzite, and Bushveld lithologies.

The Upper Zone

The south-western part of the project area (west of the farm Ketting towards farm Disseldorp) has a thick package of Upper Zone lithologies.  The package in the project consists of magnetite gabbro, mela-gabbronorite and magnetite seams and may be as thick as 350m.  Borehole WB001 on farm Disseldorp collared in Upper Zone and drilled to the depth of 322m and while still in the Upper Zone intersected a 2.5m thick magnetite seam.

The appearance of the first non-magnetic mafic lithologies indicates the start of the underlying Main Zone.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 48

Coffey Mining South Africa (Pty) Ltd

Figure 7.3.1_1

General Stratigraphy of the Waterberg Projects

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 49

Coffey Mining South Africa (Pty) Ltd

Waterberg Group

The Waterberg Sedimentary package occurs with mostly two formations within the project area i.e.  the Makgabeng and Setlaole Formations.  The whole package may have a thickness ranging from 120m to just over 760m.  Generally the Waterberg Sedimentary package in the southwest and thins towards the centre of the project area before thickening to the north.  The east-west trending feature through the middle part of the Project is considered to be an erosional channel.

Setlaole Formation

This is the sedimentary formation underlying the Makgabeng Formation and sits at the base of the Waterberg Group sedimentary succession.  It is this formation that overlies the Bushveld igneous rocks, and has been intersected in more than 90% of the boreholes within the project area.

Lithologically, the Setlaole Formation consists of medium to coarse grained sandstones and several mudstones and shales, that have a general purple colour and usually the package displays a coarsening down sequence.  Towards the base of the formation, pebbles may be seen that will eventually appear to be forming conglomerates.  The rocks are frequently intruded by dolerite and granodiorite sills.  A red shale band of variable thickness is generally present at the base of the Setlaole Formation, below the basal conglomerate.

Makgabeng Formation

This sedimentary formation overlies the Setlaole Formation and is mostly exposed in the mountain cliffs in the northern part of the project area.  The formation is composed of light- red coloured banded sandstone rocks and generally displays a horizontal inclination.

7.3.2Structure

The Waterberg Sedimentary package has been intersected by numerous criss-crossing dolerite or granodiorite sills or dykes.  These usually range from as thin as 5cm to as thick as 90m.

A major northwest-southeast trending fault has been inferred based on boreholes towards the southern part of the Ketting property.  The fault throw is estimated to be approximately 300m.  A further fault splay has also been interpreted on the south-eastern part of Ketting.

7.4Mineralized Zones

PGM mineralization within the Bushveld package underlying the Waterberg JV Project is hosted in two main layers: the T - Zone and the F — Zone.

The T - Zone occurs within the Main Zone just beneath the contact of the overlaying Upper Zone.  Although the T — Zone consists of numerous mineralized layers, two potential economical layers have been identified, T1- and T2 - Layers.  They are composed mainly of anorthosite, pegmatoidal gabbros, pyroxenite, troctolite, harzburgite, gabbronorite and norite. 

The F - Zone is hosted in a cyclic unit of olivine rich lithologies towards the base of the Main Zone towards the bottom of the Bushveld Complex.  This zone consists of alternating units of harzburgite, troctolite and pyroxenites.  The F - Zone has been divided into the FH and FP layers.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 50

Coffey Mining South Africa (Pty) Ltd

The FH layer has significantly higher volumes of olivine in contrast with the lower lying FP layer, which is predominately pyroxenite.  The FH layer is further subdivided into six cyclic units chemically identified by their geochemical signature, especially chrome.  The base of these units can also lithologically identified by a pyroxenite layer.

The mineralization generally comprises sulphide blebs, net-textured to interstitial sulphides and disseminated sulphides within gabbronorite and norite, pyroxenite, harzburgite.

Within the F - Zone, basement topography may have played a role in the formation of higher grade and thicknesses where embayments or large scale changes in magma flow direction facilitated the accumulation of magmatic sulphides.  These areas are referred to by PTM as the “Super F” Zones where the sulphide mineralization is over 40m thick and within the defined areas average 3g/t to 4g/t 2PGE+Au.  Layered magmatic sulphide mineralization is generally present at the base of the F - Zone.  As with the T - Zone, the sub-outcrop of the F - Zone unconformably abuts the base of the Waterberg Group sedimentary rocks and trends northeast from the end of the known northern limb and dips moderately to the northwest.

The T - Zone includes a number of lithologically different and separate layers (Figure 7.4_1) which were initially recognised in the drilling.  With subsequent drilling, it has become clear that the most easily identifiable and consistent are the T1 and T2 - Layers.

Figure 7.4_1

Stratigraphy of the Mineralised Layers

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 51

Coffey Mining South Africa (Pty) Ltd

Description of Mineralised Zones

T - Zone

The T - Zone is a correlateable unit which includes five identifiable layers.  The two mineralized and economical potential layers are the T1 - Layer underlain by the T2 - Layer.  The remaining layers are considered to have less economic potential at this stage and are seen as internal waste between the T1 - and T2 - Layers.

UPA (Upper Pegmatoidal Anorthosite) — This is the T1 - Layer hangingwall which has a pegmatoidal texture, is mostly anorthositic and in a few cases gabbroic.  This unit is generally not mineralized however it has been found to have some sulphide mineralization in a few boreholes and the mineralization is hosted within the mafic crystals of the pegmatoidal texture.

This unit has a thickness range of 2m to as thick as 100m, and it has over 80% correlation throughout the boreholes.  It must be noted that the unit is absent in some few boreholes and it also appears more mafic in some instances due to alteration of the anorthositic and gabbroic phases.

Mineralization within the T1 — Layer is hosted in a troctolite with variations in places where troctolite grades into feldspathic harzburgite. In other localities, olivine bearing feldspathic pyroxenite grades into feldspathic harzburgite.  The 3PGE+Au grade (g/t) is typically 1-7g/t with a Pt:Pd ratio of about 1:1.7.  The Cu and Ni grades are typically 0.08% and 0.08% respectively.

The unit is mineralized with blebby to net-textured Cu-Ni sulphides (chalcopyrite/pyrite and pentlandite) with very minimal Fe-sulphides (pyrrhotite).  The thickness of the layer varies from 2m to 6m.

The direct footwall unit of the T1 - Layer can be divided into two identifiable units: the Lower Pegmatoidal Anorthosite (LPA) and the Lower Pegmatoidal Pyroxenite (LPP).  These units have an unconformable relationship with one another as both are not always present.

LPA (Lower Pegmatoidal Anorthosite) — This is the first middling unit underlying the T1 — Layer.  It has the same composition as that of the UPA but is usually thinner than the UPA.  The thickness for this unit ranges from 0 — 3m, and in some boreholes this unit is not developed.  This unit is mineralized in some boreholes.

LPP (Lower Pegmatoidal Pyroxenite) — This is the second middling unit which underlies the LPA, and it predominantly composed of pegmatoidal pyroxenite.  It also ranges from 0 — 3m as it is not developed in other boreholes.  This unit also sits as a T2 - Layer hangingwall.  Mineralization has not been identified in this unit.

Mineralization within the T2 — Layer is hosted in Main Zone norite and gabbronorite that shows a distinctive elongated texture of milky feldspars.  In some instances, the T2 gabbronorite / norite tends to grade into pyroxenite and in places into a pegmatoidal feldspathic pyroxenitic phases, with the same style of mineralization as in the gabbronorite / norite.  Lithologically, the T2 - Layer is generally thicker than the T1 — Layer.  The high grade zones range from 2m to approximately

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 52

Coffey Mining South Africa (Pty) Ltd

10m within these lithologies.  Sulphide mineralization in T2 — Layer is net textured to disseminated with higher concentration of sulphides compared to the overlying T1 - Layer.  The 3PGE+Au grade (g/t) is typically 1-6g/t with a Pt:Pd ratio of about 1:1.7.  The Cu and Ni grades are typically 0.17% and 0.09% respectively.

A thick package of norite and gabbronorite ranging from 100m to about 450m underlies the T - Zone and overlies the F - Zone.

F - Zone mineralization is hosted in a thick package of troctolite which usually has small-sized bands of pyroxenite and / or pegmatoidal pyroxenite and harzburgite.  These layers or pulses have been identified using their geochemical signatures and various elemental ratios.  The initial subdivision has been into a harzburgitic layer (FH) which is overlain by a pyroxenitic layer (FP).  The harzburgitic layer (FH) has been further subdivided into six units of varying thickness based on the noted significant occurrence of chrome in the geochemical signature (Figure 7.4_2).  In each case the concentration of the chrome falls off steadily going up in the sequence until the next significant occurrence of chrome is noted.

Figure 7.4_2

Individual Units of the F - Zone

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 53

Coffey Mining South Africa (Pty) Ltd

8DEPOSIT TYPES

The Platreef (senso stricto) as described in Section 7.1.2 has a strike extent of some 30 km, whereas Platreef-style mineralization, which is the anticipated target of the Waterberg JV Project, occurs over the 110km strike length of the northern limb (Kinnaird et al, 2005).

The Platreef is a layered deposit hosted by a combination of norite, pyroxenite, and harzburgite lithologies and is present towards the base of the Bushveld Complex, in contact with metasedimentary and granitic floor rocks.  The Platreef varies from 400m thick in the south of the northern limb to <50m in the north.  The overall strike is northwest or north, with dips 40—45° to the west at surface with the dip becoming shallower down dip.  The overall geometry of the southern Platreef appears to have been controlled by irregular floor topography.

The Platreef-type deposits can include the following features:

·Sulphide hosted nickel, copper and PGM mineralization considered to be of magmatic origin.

·A deposit hosted by a composite a combination of norite, pyroxenite, and harzburgite rocks.

·Contact style mineralization along the base of the intrusion; which may be several hundreds of metres in thickness.

·The mineralized rocks contain locally abundant xenoliths of floor rocks (typically dolomite and shale) suggesting interaction of the magma with relatively reactive floor rocks.

·Thick mineralized intervals greater than 5m and locally tens to hundreds of metres thick.

The mineralized layers of the Waterberg JV and Waterberg Extension Projects meet some these criteria:

·The mineralization is hosted by sulphides that are apparently magmatic in origin.

·The mineralized layers can be relatively thick, greater than 10m.

The other criteria relating to the Platreef have yet to be demonstrated.  As a result this mineralization is considered to be similar i.e.  Platreef-like but its stratigraphic position, geochemical and lithological profiles suggest a type of mineralization not previously recognised in the Bushveld Complex.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 54

Coffey Mining South Africa (Pty) Ltd

9EXPLORATION

9.1Current Exploration

The Waterberg JV Project is at a more advanced exploration status and includes an Inferred Mineral Resource estimate.  The Waterberg Extension Project is at an advanced exploration stage that was initiated later to investigate the interpreted strike extension of the Bushveld Complex from the Waterberg JV Project.  As a result of this drilling program portions of the Waterberg Extension Project can be classified as an Inferred Mineral Resource.

A multidisciplinary project team established by PTM identified and ranked 108 Southern African targets through an interactive process using an expert ranking system.  These are located in mafic to ultramafic rocks and have the potential, or have already been shown, to host PGM and Ni deposits.  Targets were characterised by varying maturity.  In addition, an innovative approach has been adopted, which also resulted in the identification and definition of “out of the box” targets defining some 12 targets.  Application for the prospecting rights in respect of four of these targets has been made.

Farm boundaries were defined for these various targets areas.  Project activities began with the deed searches, detailed desk top studies of the selected areas, and the subsequent compilation of prospecting right applications.

The shape and extent of the extension to the Bushveld Complex below younger rocks and cover, was not known.  Regional gravity and magnetics indicated potential existence of rocks of the Bushveld Complex that had not been explored.  Detailed gravity and magnetic surveys by PTM, funded by JOGMEC indicated the possibility of Bushveld Complex rocks within the Waterberg JV Project area.  Later detailed airborne geophysics funded by PTM indicated the possibility of further strike extension of the Bushveld Complex within the Waterberg Extension Project area.

Previous mineral exploration activities were limited due to the extensive sand cover and the understanding that the area was underlain by the Waterberg Group.  Initial exploration was driven by detailed gravity and magnetics.  Subsequently exploration was driven by drilling and has been undertaken by PTM.

9.1.1Surface Mapping

Topographical and aerial maps for Waterberg at a scale of 1:10,000 were used for surface mapping.  A combination of the surface maps and the public aeromagnetic and gravity maps formed the basis for the structural map.

Ground exploration work undertaken includes geological mapping and ground verification of the geology presented in various government and academic papers.  The major faults and SMZ geology described was confirmed to exist within the property.  Contact relationships with the Bushveld Complex were not seen due to the Waterberg cover rock and quaternary sand deposits.

Data for any outcrop observed (or control point) was recorded.  Each of such outcrop points had the following recorded in the field book: point’s name, description of the outcrop’s rock, identified rock name, XY coordinate points, and if well oriented the dip and strike for the outcrop.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 55

Coffey Mining South Africa (Pty) Ltd

It is noted that most of the area surrounding the Waterberg Mountains is covered by Waterberg sands and as such mapping in these areas has provided minimal information.  Access to some parts of the Waterberg Mountains is problematic due to steep slopes close to the mountains.

9.1.2Geochemical Soil Sampling

In March 2010 two north-south sampling lines (Figure 9.1.2_1) were undertaken.  Sampling stations were made at intervals of 25m.  Each sample hole was allowed to go to a minimum depth of 50cm to 1.00m at most.

During December 2011 and January 2012 two additional north-south lines on the property Niet Mogelyk 371LR were also sampled (Figure 9.1.2_1).  These two lines were done to target the east-west trending dykes that are running through this property and the sampling stations were set at 50m apart.

During January 2013 an additional three lines were taken on the farms Bayswater 370LR and Niet Mogelyk 371LR.  These samples were taken to investigate soil anomalies discover by the previous sampling programs (Figure 9.1.2_1)

A total of 723 samples, of which 367 were soil samples, 277 stream sediment samples and 79 rock chip samples, were collected during this process.

Geochemical sampling of the soils was also partially compromised due to very thin overburden because of sub cropping rock formations.

9.2Geophysical Surveys

Initial detailed ground geophysical surveys were confined to the Waterberg JV Project and were funded by the JV partner JOGMEC.  The detailed airborne survey was completed predominantly over the Waterberg Extension Project, with some overlap over the defined Bushveld edge geology on the advanced stage Waterberg JV Project to obtain response characteristics.

9.2.1Waterberg JV Project — Initial survey

Approximately 60 lines of geophysical survey for 488 line km using gravity and magnetics were traversed in March 2010 (Figure 9.1.2_1).  These were east — west trending lines and were traversed on the farms Disseldorp 369LR, Kirstenspruit 351LR, Bayswater 370LR, Niet Mogelyk 371LR and Carlsruhe 390LR.  At this time, farm Ketting Prospecting Right was still pending.

As soon as Ketting was granted, a second phase of Geophysical Survey was also conducted on the farm from mid-August 2011 to September 2011 (Figure 9.1.2_1).

Two additional north-south ground magnetics lines were surveyed over the farm Ketting in November 2012.  This information was used to interpret and locate east-west striking structures (Figure 9.1.2_1).

When considering the Waterberg Extension, due to the presence of Waterberg Group cover rocks, there has been no exposure of Bushveld Complex rocks on the property.  Geophysical techniques have been employed to aid in the modelling of the projected Bushveld Complex. 

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 56

Coffey Mining South Africa (Pty) Ltd

Comparing the projected edge of the Bushveld Complex from the regional geophysics modelling, the FALCON airborne survey interpretation and the ground gravity profiles, there is general correlation, with local variations, of a north-northeast arch of where the edge of the more dense mafic intrusive rock may project beneath the Waterberg Group sediment cover.

9.2.2Extended Airborne Gravity Gradient and Magnetics

An airborne gravity survey was completed on 100 and 200m line spacing.  An interpretation of the results of the survey suggests that there may be continuity to the Bushveld Complex rocks to the northwest and north, which has the potential to host PGM mineralization to the northeast within the Waterberg Extension Project area.

PTM contracted FUGRO Airborne Surveys (Pty) Ltd.  to conduct airborne FALCON® gravity gradiometry and total field magnetic surveys.  The target for the survey was the interpreted edge sub-cropping of the Bushveld Complex to which the Waterberg sediments form the regional hanging wall.  Conducted in April 2013, the survey was comprised of 2306.16 line kilometres of Airborne Gravity Gradiometry (AGG) data and 2469.35 line kilometres of magnetic and radiometric data.  The total extent of the survey covered approximately 25km of interpreted Bushveld Complex edge within the Waterberg Extension Project area (Figure 9.2.2_1).

Interpretation was based on creating a starting model using the known geology from drilling at the adjacent Waterberg JV Project and linking it to the airborne response (Figures 9.2.2_2 and 9.2.2_3).  The geologic units were modelled in three dimensions in order to facilitate a three dimensional stochastic inversion of the geometry and density of the units making use of the gravity gradient data.  Average rock unit densities were extrapolated from the adjacent Waterberg JV Project.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 57

Coffey Mining South Africa (Pty) Ltd

Figure 9.1.2_1

Locations of Geochemical Sampling and Geophysical Traverses

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 58

Coffey Mining South Africa (Pty) Ltd

Figure 9.2.2_1

Airborne Gradient Gravity and Magnetic Survey Flight Lines

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 59

Coffey Mining South Africa (Pty) Ltd

Figure 9.2.2_2

Waterberg Extension Project Airborne Gradient Gravity Plot with Interpreted Bushveld Complex Edge

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 60

Coffey Mining South Africa (Pty) Ltd

Figure 9.2.2_3

Airborne Total Field Magnetics Plot with Interpreted Bushveld Complex Edge

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 61

Coffey Mining South Africa (Pty) Ltd

9.2.3Ground Gravity

A total of nine ground gravity traverses were completed by Geospec Instruments (Pty) Ltd along roads and tracks.  The survey lines were designed to traverses across the projected edge of the Bushveld Complex in the same area covered by the airborne survey as ground confirmation of the airborne results.  The two surveys were compared and good correlation between gravity data sets noted.  In planning the ground survey, one control line over the known deposit edge at the point where it projected from the adjacent Waterberg JV Project was completed in order to acquire a signature profile over a known source to compare the remaining regional lines to.  The interpretation of the linked ground gravity profiles suggests that there may be a northwest trending continuity to the Bushveld Complex rocks which have the potential to host PGM mineralization.

9.3Coffey: Technical Review

Suitable exploration has been undertaken with appropriate conclusions and follow-up work completed.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 62

Coffey Mining South Africa (Pty) Ltd

10DRILLING

10.1Drilling in 2010

Based on the target generation and the results of the geochemical sampling and geochemical surveys, two boreholes WB001 and WB002 were initially drilled between July and October 2011 on the farm Disseldorp 369LR.  A total of 1,934.77m was drilled for the first two boreholes in 2010.

10.2Drilling in 2011 to 2013

Waterberg JV Project

Drilling resumed in 2011 with a third borehole WB003 was drilled on the farm Ketting.  The geological information revealed by this borehole lead to the extension of the drilling campaign such that in 2012, drilling with up to 10 diamond drill rigs was undertaken.

A total of 130,342m of core had been drilled by September 2013, the cut off date of the mineral resource estimate.  NQ core size (47.6mm) was drilled.  The results of 112 boreholes were available for the mineral resource estimate.  A basic 250m x 250m grid drilled grid was used to place the boreholes where possible.

Drilling in some areas proved to be difficult due to bad ground formations particularly in the Waterberg sediments and so some boreholes had to be re-drilled a few metres away or totally abandoned or moved.  An example of such a borehole is WB007 which had high water pressure to the extent that the drilling rods were being pushed out of the hole.  This borehole is located outside the current mineral resource area.

Waterberg Extension Project

Diamond drilling commenced in October 2013 upon the official granting of the prospecting right for the Waterberg Extension Projects.  The initial borehole locations were chosen to test the interpreted northeast strike continuation of the Bushveld Complex edge and mineralized layers defined on the adjacent Waterberg JV Project with step outs of 1 to 2km.  Six diamond drill machines were mobilized.  Eight of the nine initial boreholes intersected Bushveld Complex stratigraphy.

10.3Exploration Drilling Status 21 October 2014

Waterberg JV Project

For the resource estimate (Effective Date: 12 June 2014), the raw database consisted of 114 boreholes with 193 deflections, totaling 307 intersection points (131,762m).  Since then an additional 53,684m representing 56 exploration boreholes and 58 deflections has been completed on the Waterberg JV Project

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 63

Coffey Mining South Africa (Pty) Ltd

Waterberg Extension Project

The mineral resource (Effective Date: 12 June 2014) for the Waterberg Extension Project area utilised a database comprising 27 boreholes with 56 intersection points (23,132m).  Eleven boreholes (8,690m) have been drilled on farms north of Early Dawn to confirm the continuation of mineralization.  Since then 17,775m representing 12 exploration boreholes and 26 deflections has been completed on the Waterberg Extension Project.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 64

Coffey Mining South Africa (Pty) Ltd

Figure 10.3_1

Location of Boreholes on the Waterberg JV Project

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 65

Coffey Mining South Africa (Pty) Ltd

Figure 10.3_2

Location of Boreholes on the Waterberg Extension Project

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 66

Coffey Mining South Africa (Pty) Ltd

10.4Drilling Quality

Coffey has examined randomly selected borehole cores.  The core recovery and core quality meet or exceed industry standards.

10.5Diamond Core Sampling

Sample selection was undertaken by qualified geologists based on a minimum sample length of approximately 25cm — 50cm.  Not all borehole core has been sampled, but all core with visually identifiable sulphide mineralization has been analysed, and low grade to waste portions straddling these layers have also been sampled.  A maximum sample length of 1m has been applied where appropriate.  The true width of the shallow dipping (30° to 35°) mineralized zones that have been sampled are approximately 82% to 87% of the reported interval from the vertical borehole.

The sampled core is split using an electric powered circular diamond blade saw.

10.6Sample Recovery

Core recoveries, RQD (Rock Quality Designation) and a note of core quality, are recorded continuously for each borehole.  Minimum core recovery accepted was 95% measured over a 6m run.  This was achieved for all boreholes.

10.7Sample Quality

Coffey has examined selected boreholes and has assessed the quality of sampling to meet or exceed industry standards.

10.8Interpretation of Results

The results of the drilling and the general geological interpretation are digitally captured in SABLE and a GIS software package named ARCVIEW.  The borehole locations, together with the geology and assay results, are plotted on plan.  Regularly spaced sections are drawn to assist with correlation and understanding of the geology.  This information was useful for interpreting the sequence of the stratigraphy intersected as well as for verifying the borehole information.

Waterberg JV Project

The drilling on the Waterberg JV Project is at an advanced stage and has been utilized to estimate an Inferred Mineral Resource (Effective Date: 12 June 2014).  This report updates the exploration drilling completed subsequent to the last resource estimate.  The latest drillhole intersections announced on are presented in Table10.810.8 _1 and Table 10.8_2).

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 67

Coffey Mining South Africa (Pty) Ltd

Table 10.8_1

Waterberg JV Project

Recent T-Zone intercepts

Hole ID	Y	X	FROM (m)	TO (m)	Zone	LENGTH (m)	Pt (g/t)	Pd (g/t)	Au (g/t)	3E (g/t)	Pt:Pd:Au	Cu% (%)	Ni% (%)
WB124	11 832.26	2 588 003.90	210.98	220.00	T2	9.02	0.71	0.42	0.98	2.11	34:20:46	0.20	0.09
WB125	12 080.78	2 588 255.99	197.25	203.00	T2	5.75	1.58	2.54	1.17	5.29	30:48:22	0.24	0.12
WB126	11 829.15	2 587 877.99	236.00	245.00	T2	9.00	1.61	3.64	0.98	6.23	26:58:16	0.29	0.15
WB127	12 078.90	2 587 883.36	381.68	392.50	T2	10.82	1.31	3.52	0.74	5.57	24:63:13	0.13	0.09
WB130	12 078.21	2 588 004.00	327.93	333.00	T2	5.07	0.41	0.39	0.31	1.11	37:35:28	0.06	0.05
WB131	11 954.18	2 588 007.22	269.10	276.00	T2	6.90	0.22	0.19	0.51	0.92	24:21:55	0.11	0.06
WB133	12 079.71	2 587 754.44	444.00	457.03	T2	13.03	0.95	1.53	0.85	3.33	29:46:26	0.12	0.07
WB134	12 203.74	2 588 629.65	Faulted
WB135	12 322.26	2 588 382.25	Faulted
WB137	11 706.42	2 588 002.47	152.50	154.50	T2	2.00	0.82	0.80	0.76	2.38	34:34:32	0.21	0.10
WB139	12 200.99	2 588 004.74	383.00	389.09	T2	6.09	1.35	2.20	0.88	4.43	30:50:20	0.12	0.07
WB140	11 948.55	2 587 754.44	365.77	373.50	T2	7.73	1.28	1.62	1.27	4.17	31:39:30	0.16	0.07
WB141	12 312.72	2 588 600.59	Faulted
WB142	11 954.35	2 588 253.36	177.00	185.00	T2	8.00	0.22	0.15	0.35	0.72	31:21:49	0.10	0.06
WB145	12 075.15	2 588 381.77	Faulted
WB147	12 203.63	2 587 757.99	493.89	498.00	T2	4.11	1.17	3.36	1.02	5.55	21:61:18	0.17	0.09
WB148	11 825.48	2 588 127.09	188.00	190.00	T2	2.00	0.30	0.17	0.55	1.02	29:17:54	0.09	0.05
WB149	12 202.23	2 588 254.21	256.35	267.50	T2	11.15	0.84	0.61	1.75	3.20	26:19:55	0.37	0.17
WB156	11 825.44	2 587 506.14	393.00	399.01	T2	6.01	0.97	2.00	0.69	3.66	27:55:19	0.12	0.08
WB157	11 580.94	2 587 754.89	159.50	165.00	T2	5.50	0.48	0.70	0.19	1.37	35:51:14	0.03	0.02
WB158	11 577.72	2 587 505.97	225.25	230.50	T2	5.25	0.11	0.10	0.10	0.31	35:32:32	0.02	0.02
WB159	12 080.02	2 587 507.07	545.50	550.63	T2	5.13	1.01	1.82	0.69	3.52	29:52:20	0.10	0.05

*The true thickness of the intercepts is estimated to be 78% of the vertical thickness.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 68

Coffey Mining South Africa (Pty) Ltd

F Zone intercepts

The F Zone consists of a broad mineralized package generally, with higher grade top and bottom loaded cuts. Final cuts for modelling will be determined later and may include the selected or broader cuts in certain areas.

Table 10.8_2

Waterberg JV Project

Recent F-Zone intercepts

Hole ID	Y	X	FROM (m)	TO (m)	Zone	LENGTH (m)	Pt (g/t)	Pd (g/t)	Au (g/t)	3E (g/t)	Pt:Pd:Au	Cu% (%)	Ni% (%)
WB113	10 204.81	2 586 125.87	500.63	570.50	Super F	69.87	0.49	1.25	0.10	1.84	27:68:5	0.05	0.15
WB113	10 204.81	2 586 125.87	500.63	506.50	Top	5.87	1.01	1.85	0.15	3.01	34:61:5	0.05	0.22
WB113	10 204.81	2 586 125.87	561.00	570.50	Bottom	9.50	0.88	2.64	0.17	3.69	24:72:5	0.08	0.17
WB114	10 453.92	2 586 257.99	654.50	678.30	Super F	23.80	0.54	1.22	0.11	1.87	29:65:6	0.08	0.22
WB114	10 453.92	2 586 257.99	654.50	657.50	Top	3.00	1.04	2.27	0.17	3.48	30:65:5	0.16	0.30
WB114	10 453.92	2 586 257.99	668.71	671.30	Bottom	2.59	0.94	2.19	0.17	3.30	28:66:5	0.14	0.30
WB115	10 078.91	2 586 007.67	506.50	578.92	Super F	72.42	0.59	1.48	0.11	2.18	27:68:5	0.07	0.17
WB115	10 078.91	2 586 007.67	506.50	520.86	Top	14.36	0.51	1.22	0.10	1.83	28:67:5	0.06	0.20
WB115	10 078.91	2 586 007.67	544.40	578.50	Bottom	34.10	0.91	2.35	0.17	3.43	27:69:5	0.09	0.18
WB116	10 328.29	2 585 755.66	750.50	798.04	Super F	47.54	1.13	2.43	0.17	3.73	30:65:5	0.06	0.16
WB116	10 328.29	2 585 755.66	750.50	766.50	Top	16.00	1.65	3.69	0.26	5.60	29:66:5	0.09	0.22
WB116	10 328.29	2 585 755.66	777.50	798.04	Bottom	20.54	1.03	2.15	0.14	3.32	31:65:4	0.05	0.14
WB117	10 576.75	2 586 509.23	613.00	643.00	Super F	30.00	0.85	2.09	0.13	3.07	28:68:4	0.05	0.19
WB117	10 576.75	2 586 509.23	613.00	618.50	Top	5.50	0.68	3.06	0.15	3.89	17:79:4	0.05	0.22
WB117	10 576.75	2 586 509.23	630.00	643.00	Bottom	13.00	1.14	2.45	0.15	3.74	30:66:4	0.07	0.19
WB118	10 078.99	2 585 752.86	568.00	587.50	Super F	19.50	0.73	1.59	0.18	2.50	29:64:7	0.06	0.18
WB118	10 078.99	2 585 752.86	568.00	573.50	Top	5.50	1.42	2.99	0.40	4.81	30:62:8	0.09	0.24
WB118	10 078.99	2 585 752.86	582.09	587.50	Bottom	5.41	0.59	1.34	0.11	2.04	29:66:5	0.04	0.18
WB119	10 327.27	2 586 004.22	681.00	741.31	Super F	60.31	0.71	1.54	0.11	2.36	30:65:5
WB119	10 327.27	2 586 004.22	681.00	686.00	Top	5.00	0.90	2.23	0.15	3.28	27:68:5
WB119	10 327.27	2 586 004.22	729.37	741.31	Bottom	11.94	1.74	3.16	0.20	5.10	34:62:4
WB120	9 578.87	2 585 755.12	269.21	319.50	Super F	50.29	0.27	0.61	0.05	0.93	29:66:5	0.02	0.13
WB120	9 578.87	2 585 755.12	269.21	274.25	Top	5.04	0.70	1.57	0.12	2.39	29:66:5	0.06	0.16

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 69

Coffey Mining South Africa (Pty) Ltd

Table 10.8_2

Waterberg JV Project

Recent F-Zone intercepts

Hole ID	Y	X	FROM (m)	TO (m)	Zone	LENGTH (m)	Pt (g/t)	Pd (g/t)	Au (g/t)	3E (g/t)	Pt:Pd:Au	Cu% (%)	Ni% (%)
WB120	9 578.87	2 585 755.12	314.50	319.50	Bottom	5.00	0.82	2.07	0.17	3.06	27:68:6	0.06	0.16
WB121	9 828.95	2 585 751.26	394.55	479.96	Super F	85.41	0.28	0.52	0.04	0.84	33:62:5	0.01	0.11
WB121	9 828.95	2 585 751.26	394.55	397.44	Top	2.89	0.74	1.41	0.11	2.26	33:62:5	0.03	0.16
WB121	9 828.95	2 585 751.26	474.00	479.96	Bottom	5.96	1.18	2.54	0.15	3.87	30:66:4	0.05	0.17
WB122	10 464.21	2 586 520.00	495.00	504.50	Super F	9.50	0.80	1.24	0.06	2.10	38:59:3	0.03	0.11
WB122	10 464.21	2 586 520.00	495.00	498.50	Top	3.50	1.76	2.58	0.02	4.36	40:59:0	0.01	0.11
WB123	9 825.49	2 586 004.86	370.00	450.00	Super F	80.00	1.41	3.18	0.21	4.80	29:66:4	0.10	0.23
WB123	9 825.49	2 586 004.86	370.00	403.67	Top	33.67	1.52	4.01	0.25	5.78	26:69:4	0.12	0.25
WB123	9 825.49	2 586 004.86	418.50	450.00	Bottom	31.50	1.64	3.02	0.21	4.87	34:62:4	0.10	0.24
WB132	10 574.57	2 586 252.39	773.00	819.34	Super F	46.34	0.70	1.51	0.13	2.34	30:65:6	0.09	0.21
WB132	10 574.57	2 586 252.39	776.40	783.00	Top	6.60	0.87	2.26	0.20	3.33	26:68:6	0.15	0.25
WB132	10 574.57	2 586 252.39	809.03	815.46	Bottom	6.43	1.14	2.11	0.20	3.45	33:61:6	0.12	0.25
WB150	10 824.80	2 586 253.02	906.00	972.50	Super F	66.50	0.90	2.40	0.17	3.47	26:69:5
WB150	10 824.80	2 586 253.02	906.00	933.00	Top	27.00	1.12	2.77	0.21	4.10	27:68:5
WB150	10 824.80	2 586 253.02	962.08	972.50	Bottom	10.42	0.93	2.71	0.19	3.83	24:71:5
WB160	10 825.09	2 586 507.16	808.00	840.00	Super F	32.00	0.48	0.87	0.07	1.42	34:61:5	0.04	0.16
WB160	10 825.09	2 586 507.16	808.00	811.00	Top	3.00	1.08	1.78	0.12	2.98	36:60:4	0.05	0.19
WB160	10 825.09	2 586 507.16	833.89	840.00	Bottom	6.11	0.96	1.58	0.13	2.67	36:59:5	0.08	0.16
WB161	10 579.67	2 586 126.40	771.00	817.79	Super F	46.79	1.06	2.51	0.19	3.76	28:67:5	0.10	0.19
WB161	10 579.67	2 586 126.40	771.00	793.00	Top	22.00	1.11	2.57	0.19	3.87	29:66:5	0.11	0.19
WB161	10 579.67	2 586 126.40	797.95	817.79	Bottom	19.84	1.18	2.85	0.23	4.26	28:67:5	0.12	0.20
WB163	11 080.61	2 586 253.03	1 004.93	1 077.00	Super F	72.07	0.75	1.96	0.14	2.85	26:69:5
WB163	11 080.61	2 586 253.03	1 004.93	1 021.47	Top	16.54	1.06	3.10	0.22	4.38	24:71:5
WB163	11 080.61	2 586 253.03	1 071.00	1 077.00	Bottom	6.00	1.21	3.05	0.21	4.47	27:68:5
WB164	10 578.88	2 586 004.53	803.75	828.54	Super F	24.79	0.85	2.51	0.18	3.54	24:71:5
WB164	10 578.88	2 586 004.53	804.50	812.00	Top	7.50	0.64	1.70	0.12	2.46	26:69:5
WB164	10 578.88	2 586 004.53	818.01	828.54	Bottom	10.53	1.22	3.94	0.27	5.43	22:73:5

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 70

Coffey Mining South Africa (Pty) Ltd

*The true thickness of the intercepts is estimated to be 78% of the vertical thickness.

Table 10.8_3

Waterberg Extension Project

Recent F-Zone intercepts

Hole ID	Y	X	FROM (m)	TO (m)	Zone	LENGTH (m)	Pt (g/t)	Pd (g/t)	Au (g/t)	3E (g/t)	Pt:Pd:Au	Cu% (%)	Ni% (%)
WE046	7 560	2 579 083	1 475.00	1 477.50	F Zone	2.50	0.61	1.33	0.06	2.00	30:67:3	0.02	0.16
WE048	7 429	2 580 381	535.60	538.50	T Zone	2.90	0.88	2.10	0.14	3.12	28:67:5
WE048	7 429	2 580 381			F zone	Awaiting assays

*The true thickness of the intercepts is estimated to be 78% of the vertical thickness.

.

Waterberg Extension Project

At the effective date of this report the assays from 24 boreholes on the Waterberg Extension Project have been returned.  The stratigraphic position and assay results of the sulphide mineralized zones intercepted in drilling of the Waterberg Extension Project confirm that they are F - Zone mineralization.  The latest drillhole intersections announced on are presented in Table 10.8_3).

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and Waterberg Extension Projects South Africa — 16 December 2014 Page 71

Coffey Mining South Africa (Pty) Ltd

10.9Coffey: Technical Review

Suitable drilling has been undertaken with appropriate standards in place to ensure that the data is suitable for use in geological modelling and mineral resource estimation on the Waterberg JV Project.  Further exploration drilling is ongoing.

The current drilling programme should be completed prior to updating of the geological model and estimating an updated mineral resource estimation.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and Waterberg Extension Projects South Africa — 16 December 2014 Page 72

Coffey Mining South Africa (Pty) Ltd

11SAMPLE PREPARATION, ANALYSES AND SECURITY

11.1Core Handling

Drilled core is cleaned, de-greased and packed into metal core boxes by the drilling company.  The core is collected from the drilling site on a daily basis by a PTM geologist and transported to the coreyard at Marken by PTM personnel.  Before the core is taken off the drilling site, the depths are checked and entered on a daily drilling report, which is then signed off by PTM.  The core yard manager is responsible for checking all drilled core pieces and recording the following information:

·Drillers’ depth markers (discrepancies are recorded);

·Fitment and marking of core pieces;

·Core losses and core gains;

·Grinding of core;

·One-meter-interval markings on core for sample referencing; and

·Re-checking of depth markings for accuracy

An example of the marking of a borehole is presented in Figure 11.1_1.

11.2Core Logging and Identification of Mineralized Layers

Core logging is done by hand on a pro-forma sheet by qualified geologists under supervision of the Project Geologist.  This data is entered into an electronic logging program, SABLE, by data capturers under supervision of the Database Manager.  Electronic data is backed up daily and the entire database is backed up on a weekly basis and duplicated off-site.

A printout of the logging is handed back to the relevant geologists, who then verify their logging for precision and accuracy.

If the geologist is satisfied with the validity of the data, the logging is signed off and filed in a designated borehole file.  The borehole files are stored in a filing cabinet on site and will ultimately contain all relevant information pertaining to a particular borehole and all activities relating to it.  A control matrix forms part of the borehole file QA/QC and only when completed, will be signed off by the Project Geologist, the Internal QP as well as the External QP.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and Waterberg Extension Projects South Africa — 16 December 2014 Page 73

Coffey Mining South Africa (Pty) Ltd

Figure 11.1_1

Photographs of an Example of Borehole Marking

11.3Sampling Methodology

Sampling tests are usually conducted at the beginning of exploration programs to determine the heterogeneity of mineralization in order to eliminate sampling error and to determine proper sampling protocol.  Deposit type, lithologies encountered, style of mineralization and heterogeneity all play a role in the method of sampling.

The sampling methodology is applied is based on industry accepted “Best Practices”.  The sampling is done in a manner that includes the entire economic unit together with hanging wall and foot wall sampling.

The first step in the sampling of the diamond core is to mark the core from the distance below collar in 1m units.  The lithologies are logged and an initial stratigraphy interpreted.  The potential mineralized layers are marked for sampling.  Thereafter the core is oriented using the layering or stratification as a reference and to ensure a consistent approach to the sampling.  A centre cut

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and Waterberg Extension Projects South Africa — 16 December 2014 Page 74

Coffey Mining South Africa (Pty) Ltd

line is then drawn lengthways for cutting.  After cutting, the material is replaced in the core trays (Figure 11.3_1).  The sample intervals are then marked as a line and a distance from collar.

Figure 11.3_1

Photograph of Core Cutting

The sample intervals are typically 25-50cm in length.  In areas where potential mineralization is less likely, the sampling interval could be as much as a metre.  The sample intervals are allocated a sampling number, which is written on the core for reference purposes.  The half-core is then removed and placed into high-quality plastic bags together with a sampling tag containing the sampling number, which is entered onto a sample sheet.  The start and end depths are marked on the core with a corresponding line (Figure 11.3_2).  The duplicate tag stays as a permanent record in the sample booklet, which is secured on site.  The responsible project geologist then seals the sampling bag.  The sampling information is recorded on a specially designed sampling sheet that facilitates digital capture into the SABLE database (commercially available logging

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and Waterberg Extension Projects South Africa — 16 December 2014 Page 75

Coffey Mining South Africa (Pty) Ltd

software).  The sampling extends to core which is considered to be of less economic potential in order to verify the bounds of mineralization.

Figure 11.3_2

Photograph of an Example of Sampling Methodology

11.4Sample Quality and Sample Bias

The sampling methodology accords with PTM protocol based on industry best practice.  The quality of the sampling is monitored and supervised by a qualified geologist.  The sampling is done in a manner that includes the entire potentially economic unit.  Sampling over-selection and sampling bias is minimised by rotating the core so that the stratification is vertical and by inserting a cutline down the centre of the core and removing one side of the core only.

11.5Supervision of Sample Preparation

Core sampling is undertaken by samplers under the guidance of qualified geologists and the supervision of the project geologist, who is responsible for timely delivery of the samples to the relevant laboratory.  The supervising and project geologists ensure that samples are transported in accordance with the PTM protocols.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and Waterberg Extension Projects South Africa — 16 December 2014 Page 76

Coffey Mining South Africa (Pty) Ltd

11.6Sample Preparation

When samples are prepared for shipment to the analytical facility the following steps are followed:

·Samples are sequenced within the secure storage area and the sample sequences examined to determine if any samples are out of order or missing;

·The sample sequences and numbers shipped are recorded both on the chain-of-custody form and on the analytical request form;

·The samples are placed according to sequence into large plastic bags.  (The numbers of the samples are enclosed on the outside of the bag with the shipment, waybill or order number and the number of bags included in the shipment);

·The chain-of-custody form and analytical request sheet are completed, signed and dated by the project geologist before the samples are removed from secured storage.  The project geologist keeps copies of the analytical request form and the chain-of-custody form on site; and

·Once the above is completed and the sample shipping bags are sealed, the samples may be removed from the secured area.  The method by which the sample shipment bags have been secured must be recorded on the chain-of-custody document so that the recipient can inspect for tampering of the shipment.

11.7Sample Security

Samples (half or quarter core) are labelled twice, once in the bag and again on the top of the bag.  Batches of approximately 20 samples are packed into large poly-weave bags and sealed with a plastic cable tie.  The batch submission number, sample numbers and number of samples are recorded on the outside of the bag.

Sample batches are collected by the laboratory.  Duplicate sample forms, bearing the batch lot number, sample numbers and number of samples are delivered with each batch.  One copy is signed for by the laboratory receiving personnel and the duplicate is returned to the Marken office for incorporation into the database.

Crushed coarse fraction of the samples and the balance of the pulp is eventually returned and stored at the Marken office.  These are bagged together, labelled and stored in plastic crates in a dry storage area.

All drill core is stored in galvanised steel core trays in a secure under cover core racking system.

Assay results from the Set Point laboratory are transmitted electronically in a standard format to the PTM Johannesburg office.  They are imported into the Master SABLE database directly from the laboratory files.  Certified assay certificates and a CD containing PDF versions of the certificates are filed at the Marken office.

The database has been customised to site specific use and all logging data, core recoveries and sampling data are captured.  Assays are electronically matched to the sample number.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and Waterberg Extension Projects South Africa — 16 December 2014 Page 77

Coffey Mining South Africa (Pty) Ltd

11.8Chain of Custody

Samples are subject to a chain of custody which is tracked at all times.  Samples are not removed from their secured storage location without the chain of custody documentation being completed to track the movement of the samples and persons responsible for the security of the samples during the movement.  Ultimate responsibility for the safe and timely delivery of the samples to the chosen analytical facility rests with the Project Geologist and samples are not transported in any manner without his written permission.

During the transportation process between the project site and SetPoint’s sample preparation facility in Mokopane, the samples are inspected and signed for by each individual or company handling the samples.  It is the mandate of both the Supervising and Project Geologist to ensure safe transportation of the samples to the sample preparation facility.  The Project Geologist ensures that the analytical facility is aware of the PTM requirements.  A photocopy of the chain of custody letter, signed and dated by an official from the facility in Mokopane, is faxed to PTM’s offices in Johannesburg upon receipt of the samples and the original signed sample receipt letter is returned to PTM.  The sample receipt letter is filed in the borehole file in the exploration office.

Hard copies of the signed analytical certificates are delivered to PTM’s Johannesburg office for archiving.

11.9Analytical Procedure

For the present database, field samples have been analyzed by two different laboratories.  The primary laboratory is currently Set Point laboratories (South Africa) and Genalysis (Australia) is used for referee analyses to confirm the accuracy of the primary laboratory.  Both laboratories are independent of PTM.

Set Point Laboratory is accredited with the South African National Accreditation System (SANAS).  Sample preparation is undertaken at the preparation facility at Mokopane.  Transportation of prepared sample pulps from their preparation facility in Mokopane to their analytical laboratory in Johannesburg is done under secure conditions as required by PTM.

11.10Sample Preparation

Samples are received, sorted, verified and checked for moisture and dried if necessary.  Each sample is weighed and the results are recorded.  Rocks, rock chips or lumps are crushed using a jaw crusher to less than 10mm.  The samples are then milled for 5 minutes in a Labtech Essa LM2 mill to achieve a fineness of 90% less than 106μm, which is the minimum requirement to ensure the best accuracy and precision during analysis.

11.11Precious Metal Determination

Samples are analysed for Pt (ppm), Pd (ppm) Rh (ppm) and Au (ppm) by standard 25g lead fire-assay using silver as requested by a co-collector to facilitate easier handling of prills as well as to minimise losses during the cupellation process.  Although collection of three elements (Pt, Pd and Au) is enhanced by this technique, the contrary is true for rhodium (Rh), which volatilises in the presence of silver during cupellation.  Palladium is used as the co-collector for Rh analysis and

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and Waterberg Extension Projects South Africa — 16 December 2014 Page 78

Coffey Mining South Africa (Pty) Ltd

then only for selected samples.  The resulting prills are dissolved with aqua regia for Inductively Coupled Plasma (“ICP”) analysis.

After pre-concentration by fire assay and microwave dissolution, the resulting solutions are analysed for Au and PGMs by the technique of ICP-OES (Inductively Coupled Plasma—Optical Emission Spectrometry).

11.12Base metals Determination

The base metals (copper, nickel, cobalt and chromium) are analysed using ICP-OES (Inductively Coupled Plasma — Optical Emission Spectrometry) after a four acid digestion.  This technique results in “almost” total digestion.

11.13Laboratory QA/QC

Precious Metals

A calibration range contains at least 4 data points for all elements.  The correlation coefficient of the calibration must be greater than 0.999.  If this fails, the instrument is recalibrated.  If it fails again new standards are to be made up to calibrate with.

After the instrument is calibrated, the Drift control standard is read back to ensure that the calibration is correct.  Thereafter, this standard is read at the end of every worksheet to check for instrument drift.  The limits for this standard are not be greater than 10% (in the range from 1 to 25ppm) for Au, Pt or Pd or else the batch fails.

Base Metals

After the ICP-OES instrument is calibrated, the QC control standard is read back to ensure that it has been calibrated correctly.  Thereafter, this standard is read at intervals of 35 samples or less to check for instrument drift.  Each batch of samples shall contain at least one blank sample, one QC sample and a duplicate.  The duplicate is a repeat of a randomly chosen sample from the batch.

11.14Quality Assurance and Quality Control (QA/QC) Procedures and Results

The PTM protocols for quality control are as follows:-

1.The core yard manager oversees the core quality control;

2.The project geologist oversees the sampling process;

3.The exploration geologists and the sample technician is responsible for the actual sampling process;

4.The project geologist oversees the chain of custody;

5.The internal QP verifies both processes and receives the laboratory data;

6.The internal resource geologist and the database manager merge the data and produce the SABLE sampling log with assay values;

7.The second external database auditor verifies the SABLE database and highlights QA&QC failures;

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and Waterberg Extension Projects South Africa — 16 December 2014 Page 79

Coffey Mining South Africa (Pty) Ltd

8.The responsible person runs the QA&QC analysis including graphs of the standards, blanks and duplicates) and reports anomalies and failures to the internal QP;

9.The internal QP requests re-assays;

10.Check samples are sent to a second laboratory to verify the validity of data received from the first laboratory;

11.Together with the project geologist, the resource geologist determines the initial resource cut; and

12.The external auditor verifies the sampling process and signs off on the resource cut.

11.15Analytical Quality Assurance and Quality Control Data

A quality assurance and quality control (QA/QC) programme was undertaken.  The QA/QC programme identifies various aspects of the results that could have negatively influenced the subsequent resource estimate.  It was possible to identify samples that had been swapped, missing samples, and incorrect labelling amongst other aspects.

The QA/QC aims to confirm both the precision and accuracy of the laboratory and thereby confirm that the data used in the mineral resource estimate is of sufficient quality.

The control samples used comprised of a standard and a blank within every 12 samples submitted and one duplicate within every 20 samples.  The intended aim was approximately 8% coverage for both standards and blanks and 5% coverage for coarse duplicates.  Further control on data integrity was achieved through submittal of pulps to a referee laboratory (Genalysis, Australia).

Definition of terms related to the QA/QC protocols applied and subsequent evaluations are provided below:

A standard is a reference sample with a known (statistically) element abundance and standard deviation (certified independently).  Reference standards are used to gauge the accuracy of analytical reporting by comparing the pre-determined values to those reported by the analytical laboratory used during an exploration project.

A blank is a standard with abundance of the element of interest below the level of detection of the analytical technique (certified independently).

A duplicate is the split of a sample taken at a particular stage of the sampling process; e.g. Field Duplicate or Pulp Duplicate.

The precision and accuracy will be discussed in terms of the following statistical measures routinely applied by Coffey.

·Thompson and Howarth Plot showing the mean relative percentage error of grouped assay pairs across the entire grade range, used to visualise precision levels by comparing against given control lines.

·Rank HARD Plot, which ranks all assay pairs in terms of precision levels measured as half of the absolute relative difference from the mean of the assay pairs (HARD), used to visualise

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and Waterberg Extension Projects South Africa — 16 December 2014 Page 80

Coffey Mining South Africa (Pty) Ltd

relative precision levels and to determine the percentage of the assay pairs population occurring at a certain precision level.

·Mean vs HARD Plot, used as another way of illustrating relative precision levels by showing the range of HARD over the grade range.

·Mean vs HRD Plot is similar to the above, but the sign is retained, thus allowing negative or positive differences to be computed.  This plot gives an overall impression of precision and also shows whether or not there is significant bias between the assay pairs by illustrating the mean percent half relative difference between the assay pairs (mean HRD).

·Correlation Plot is a simple plot of the value of assay 1 against assay 2.  This plot allows an overall visualisation of precision and bias over selected grade ranges.  Correlation coefficients are also used.

·Quantile-Quantile (Q-Q) Plot is a means where the marginal distributions of two datasets can be compared.  Similar distributions should be noted if the data is unbiased.

Quality control monitoring protocols involved submission of blanks and certified reference standards with the core sample batches.  After every 5th sample an alternating blank or standard was allocated to the sampling sequence.  The laboratory was requested to create one duplicate from the coarse reject of a randomly selected sample within every batch of 20 samples.  The selection of one pulp duplicate of a randomly selected sample within every batch of 20 samples is also requested.  The actual numbers of control samples submitted are shown in Table 11.15_1 for the Waterberg JV area and Table 11.15_2 for the Waterberg Extension Area.  A total of 10 different standards of varying grades were used at various times throughout this program depending on availability of the standards from African Mineral Standards (Pty) Ltd (AMIS).  A summary of the expected values for all standards can be seen in Table 11.15_3.  All standards were supplied by AMIS.  Quartz material supplied by Set Point has been used as the blank material.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and Waterberg Extension Projects South Africa — 16 December 2014 Page 81

Coffey Mining South Africa (Pty) Ltd

Table 11.15_1

Waterberg Project

Summary of the Number of Control Samples Used in the Waterberg JV Project Area

	Submitted Rate	Total Number		Proportion
Control Type	of Control	of Samples		of Total
AMIS0002	45			0.05	%
AMIS0110	1601			1.7	%
AMIS0124	214			0.2	%
AMIS0148	683			0.7	%
AMIS0170	531			0.6	%
AMIS0277	9			0.01	%
AMSI0278	968	94,385		1.0	%
AMIS0302	1525			1.6	%
AMIS0325	1469			1.6	%
AMIS0326	648			0.7	%
Blank	7924			8.4	%
Pulp Duplicates	281			0.3	%
Coarse Reject Duplicates	255			0.3	%
Referee	339	12013	*	2.80	%

* samples grading 0.25g/t Pt and above

Table 11.15_2

Waterberg Project

Summary of the Number of Control Samples Used in the Extension Area

	Submitted Rate	Total Number		Proportion
Control Type	of Control	of Samples		of Total
AMIS0148	180			1.90	%
AMIS0302	223			2.40	%
AMIS0325	200			2.10	%
AMIS0326	158	9479		1.70	%
Blank	801			8.50	%
Pulp Duplicates	42			0.40	%
Coarse Duplicates	480			5.10	%
Referee	28	1459	*	2	%

* samples grading 0.25g/t Pt and above

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and Waterberg Extension Projects South Africa — 16 December 2014 Page 82

Coffey Mining South Africa (Pty) Ltd

Table 11.15_3

Platinum Group Metals Ltd: Waterberg Project

Summary of Expected Values of Certified Reference Standards Used

Standard		Pt g/t	Pd g/t	Au g/t	Cu g/t	Ni g/t	Co g/t	Cr g/t
AMIS0002	EV	0.82	0.89	0.155	131	197	NC	NC
	±2 Std Dev	0.112	0.066	0.016	15	13
AMIS0110	EV	NC	NC	2.3	NC	NC	NC	NC
	±2 Std Dev			0.18
AMIS0124	EV	0.84	0.87	0.16*	1324	1917	94.3*	133*
	±2 Std Dev	0.07	0.06	0.02	106	136	15.4	30.4
AMIS0148	EV	1.64	1.13	0.84	541	900	151	NC
	±2 Std Dev	0.1	0.08	0.04	55	77	11
AMIS0170	EV	0.72	0.81	0.09	709	1071	51	NC
	±2 Std Dev	0.06	0.04	0.01	45	87	5
AMIS0277	EV	1.34	1.47	0.2	1318	2305	95	NC
	±2 Std Dev	0.06	0.12	0.02	58	241	9
AMSI0278	EV	1.7	2.12	0.26	1294	2026	76.5*	NC
	±2 Std Dev	0.1	0.14	0.02	80	236	14.1
AMIS0302	EV	NC	NC	4.47	NC	NC	NC	NC
	±2 Std Dev			0.34
AMIS0325	EV	2.06	2.25	0.3	2426	4091	201	NC
	±2 Std Dev	0.18	0.18	0.04	178	283	20
AMIS0326	EV	1.05	1.26	0.17	1403	2446	83	NC
	±2 Std Dev	0.08	0.08	0.02	89	99	10

All standards supplied by African Mineral Standards (Pty) Ltd

* Provisional Concentration

NC — Not Certified for element or method

11.16Waterberg JV Project Area

AMIS0002

Greater than 98% of values for all elements except Ni are within two standard deviation limits of the expected value (EV) with <-2% bias.  Only 64% of values for Ni fall within two standard deviations of the EV but all are well within three standard deviations with a bias of -6%.

AMIS0110

This standard is only certified for Au but greater than 99% of the values are within two standard deviation limits of the EV with a bias of -1.5%

AMIS0124

Greater than 97% of values for all elements are within two standard deviations of the EV’s with bias of <3% except for Cr and Au.  The Cr values have 100% of values within tolerance but with a high negative bias of -8% which is likely due to the fact that this element is only provisionally

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 83
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

certified.  The Au graph shows only 88% of values are within tolerance but the EV is very close to detection limit and values are unlikely to be accurate.  A single sample, G7096 fails for Pt and Pd but has acceptable concentrations for the other elements.   All real samples in the vicinity are low grade and so no follow-up is required.

AMIS0148

Greater than 89% of the results for Pt and Pd are within two standard deviations of the EV with a bias of less than -3%.  Only 68% of Au results are within two standard deviations with a bias of -3%, however it is possible that this is due to the fact that the certified tolerance is too tight for an EV below 1 g/t where accuracy is more difficult to obtain.  For Cu, Ni and Co 97%, 81% and 63% respectively were within two standard deviations of the EV but with a bias of -5%.  This standard is created from an altered variety of Platreef material and it is possible that the matrix differs to the other standards used and this coupled with the high CaO content, the methodology used may not be able to produce accurate results.  Due to the issues with this standard it is recommended that it is not used in future.  There are three noticeable fails for this standard.  The first is O117370 which has been incorrectly named in the database and is a blank, and O120479 which has been incorrectly named and should be AMIS0326 in the database.  Finally O130563 is a possible transposition with another sample and it is recommended that this sample as well as five samples either side of it within the same batch be re-assayed to confirm results.

AMIS0170

Greater than 97% of values for all elements are within two standard deviation limits of the EV with <-3% bias.  However there are six samples that have been incorrectly named as this standard and should be AMIS0110.  These are: O66268, O66718, O71377, O72492, O73066 and O75893.  These errors should be fixed manually in the database.

AMIS0277

All certified elements for this standard except Cu and Co have all of their values within the EV range with a bias <-3% Two samples, O47361 and O47385 have returned slightly higher than expected results for Cu but this trend is not repeated for either Ni or Co and so no follow up is deemed necessary.  A different sample has returned slightly lower than expected results for Co, but for both Cu and Co all samples are well within three standard deviations and as the anomalies are not present in any other element the results are considered acceptable.

AMIS0278

All certified elements for this standard have greater than 98% of their values within the EV range with -1% bias or less.  There are three samples which fail for a different element each.  As they only fail in a single element it is not deemed necessary to follow up with the laboratory.  These samples are: O48612 for Pt, O50986 for Pd and P59620 for Au.

AMIS0302

This standard is only certified for Au but greater than 99% of the Au values are within tolerance and a bias of -2% Six samples that have been incorrectly named as this standard.  Sample O84283 has been misnamed and should be a Blank.  Sample O116147 has been misnamed and

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 84
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

should be AMIS0148 and O87274, O88905, O80202 and O122859 were found to be AMIS0325.  These samples should be corrected manually in the database.

AMIS0325

Greater than 98% of values for all elements are within two standard deviation limits of the EV with a bias of <-4% except for Au which has a bias of -5% There are 14 samples which have been incorrectly named as this standard.  Samples O87286, G109233, G119702, O94190, O92869, O95858, O104710 and O107930 should be AMIS0302.  There are also two samples, O84271 and O90102 which should be Blanks.  Finally samples O11887, O113545, O120127 and O120371 should be AMIS0326.  All these samples need to have the standard name manually corrected in the database.

AMIS0326

Greater than 96% of values for all elements except Au are within two standard deviation limits of the EV with a bias of <3%.  Greater than 86% of values for Au are within two standard deviations with a bias of 3%.  There are five samples which have been incorrectly named as this standard in the database.  Samples O106036, O119714, O121305 and O124519 should be AMIS0325, whilst O112241 should be AMIS0148.  These samples should be corrected manually in the database.  Samples O107536 and O130574 fails on all elements; they do not correspond with another standard but possibly could be a transposition.  It is recommended that these samples and five samples either side of it within the same batch be re-assayed to confirm results.

Blanks

For the most part the blanks return results close to the detection limits for the methods used and are deemed acceptable.  Samples O49041, O72774, O72756, O48909, O49005, O107136, O110857, O110881, O129232 and O130414 have returned higher than expected results possibly due to slight contamination from the preceding samples during the milling process or possible due to a different Blank material being used.

Duplicates

Three types of duplicates have been assayed.  A random selection of pulp samples grading 0.25g/t Pt or more were sent back to Setpoint for re-assay as pulp duplicates. These samples were given new Sample Numbers before being submitted.  More recently the laboratory was also requested to randomly select a sample within every 20 samples and create a duplicate from the coarse reject. The laboratory also routinely randomly selects a a sample within every 20 samples and creates a duplicate from the pulp.

In the pulp duplicates dataset, Pt, Pd and Co have greater than 90% or more of the data pairs which grade more than ten times the detection limit passing 10% HARD precision limits.  Cu and Ni have 87% and 89% respectively and Au only has 73% passing 10% HARD precision limits.  There are a number of samples which are fails and these should be reviewed as the wrong sample could have been re-submitted or re-numbered incorrectly.  There also seems to be poorer precision at higher grades though what the issue here could be cannot be determined.  In the coarse reject duplicates all elements have greater than 99% of the data pairs which grade more than ten times the detection limit passing 20% HARD precision limits.  As the duplicates are

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 85
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

created from coarse rejects there should be a slightly greater variation on the results returned.  However the coarse reject duplicates have performed slightly better than the pulp.  It is possible that because the laboratory is able to track these duplicates easily as they have the same sample ID and that they are monitored more closely to ensure better precision.  This should be investigated further and in future a more suitable way would be to leave an empty packet with a unique sample number assigned in the sampling stream for a coarse reject duplicate to be created.  This way the duplicate sample is not known after preparation.

Referee Analysis

A random selection of pulps grading 0.25g/t Pt or higher was sent to Genalysis Laboratories in Johannesburg.  The analytical techniques employed were the same as those utilised by Set Point in the primary analysis to ensure compatibility of data.   However the detection limits at the two laboratories differ.  For this reason all results grading less than ten times the higher detection limit for each element were removed before plotting the results to gain a more accurate comparison.  The comparison graphs for all elements except Au show 89% or more of the data pairs passing 10% HARD.  The comparison for Au is slightly poorer with only 77% of the sample pairs passing 10% HARD, but for the most part the samples pairs with higher variability are also of higher grade and therefore is likely due to the nugget effect of Au.

The graphs for the standards inserted into the referee batches have insufficient data to allow for a comprehensive analysis.  Although there are less than ten samples of any particular standard which is insufficient for comprehensive analysis, greater than 86% of values for all elements are within two standard deviations of the EV and 100% of the values for all elements are within three standard deviations and can be considered acceptable.

11.17Waterberg Extension Project Area

AMIS0148

Greater than 91% of the results for all elements except Ni and Co are within two standard deviations of the EV with a bias of less than-3% except for Cu which has a bias of -6%.  For Ni 82% of the values are within tolerance with a bias of -4%, and Co 61% of values are within tolerance with a bias of -6%.  This standard is created from an altered variety of Platreef material and it is possible that the matrix differs to the other standards used and this coupled with the high CaO content, the methodology used may not be able to produce accurate results.  Due to the issues with this standard it is recommended that it is not used in future.

AMIS0302

This standard is only certified for Au but greater than 98% of the Au values are within tolerance and a bias of -2%.  Samples O138474 and O138832 fail and do not correspond with another standard but possibly could be a transposition.  It is recommended that these samples and five samples either side of it within the same batch be re-assayed to confirm results.

AMIS0325

Greater than 98% of values for all elements are within two standard deviation limits of the EV with a bias of <-4%.  There are three samples which have been incorrectly named as this standard.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 86
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

Samples O136406, O136930 and O140026 should be AMIS0326.  These samples need to have the standard name manually corrected in the database.

AMIS0326

Greater than 99% of values for all elements are within two standard deviation limits of the EV with a bias of <2%.  One sample, O137198, has been incorrectly named in the database and should be AMIS0325.

Blanks

For the most part the blanks return results close to the detection limits for the methods used and are deemed acceptable.  O135613 has returned higher than expected results possibly due to slight contamination from the preceding samples during the milling process or possibly a transposition with an adjacent sample.  A review of the surrounding results and possible re-assay from the coarse rejects would be required to confirm.  Sample O131406 fails in the Ni and Co graphs only suggesting a transposition with another sample before the base metal analysis as only these graphs are affected.  A review of the results from the surrounding samples is required to confirm.

Duplicates

Three types of duplicates have been assayed.  A single batch of pulp samples from borehole WE007 were re-assayed by Set Point as the original assay results did not concur with the mineralization seen in the core.   The lab was also requested to randomly select a sample within every 20 samples and create a duplicate from the coarse reject.  The laboratory also routinely randomly selects a a sample within every 20 samples and creates a duplicate from the pulp.

In the pulp duplicates all elements except Au have 90% or more of the data pairs which graded more than ten times the detection limit passing 10% HARD precision limits.  Au has only 61% of all data pairs passing 10% HARD precision limits.  It was not possible to filter out data pairs that grade lower than ten times the detection for Au as all but four samples were below which is the likely reason for the poorer comparison.

In the coarse reject duplicates, all elements have greater than 97% of the data pairs which grade more than ten times the detection limit passing 20% HARD precision limits.  A single sample O138474 falls outside acceptable limits for Au as well as all the base metal results.  It is recommended that this samples and five samples either side of it within the same batch be re-assayed to confirm results.  As the duplicates are created from coarse rejects there should be a slightly greater variation on the results returned.  However again the coarse reject duplicates have performed slightly better than the pulp and likely for the same reasons as stated previously.

Referee Analysis

A single batch of samples from borehole WE007 was sent to Genalysis laboratories in Johannesburg for referee analysis as the original assay results did not concur with the mineralization seen in the core.  The analytical techniques employed were the same as those utilised by Set Point in the primary analysis to ensure compatibility of data.   However the detection limits at the two laboratories differ.  For this reason all results grading less than ten times the higher detection limit for each element was removed before plotting the results to gain a more

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 87
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

accurate comparison.  The comparison graphs for Pd, Cu and Ni show only 75% or more of the data pairs passing 20% HARD, and Pt and Au show 52% and 58% respectively.  There was insufficient numbers of standards inserted in this batch to graph but they returned results within acceptable limits.  It is suspected that the poor comparison between laboratories is due to the fact that a separate ¼ split of core was sent to Genalysis rather than remaining pulp samples and a high nugget effect is being displayed especially with regards to Pt and Au grades.  This will require further investigation to confirm.

11.18Recommendations and Conclusion

From the analysis of the QA/QC data Coffey recommends the following:-

·AMIS0148 is a standard created from altered Platreef material which also has a high CaO content.  The QA/QC evaluation has highlighted an issue with this standard, possibly connected to it having a different matrix compared to the other standards used.  This coupled with the high CaO content, would indicate that the methodology used may not be able to produce accurate results.  It is therefore recommended that this standard is not used in the future.

·There are still insufficient duplicate pairs in the database for the JV area to check the precision at the primary laboratory.  It was previously recommended that 592 samples (10% of all samples where the Pt grade is higher than 0.25g/t) be submitted for this purpose to Set Point.  To date approximately half of this has been submitted as pulp duplicates.

·Currently between 2% and 3% of samples with 0.25g/t Pt or higher have been submitted to Genalysis for referee analysis.  It is recommended that this is increased to 5% for each area.

·It is noted that Blanks have been included in the batches sent to the referee laboratory.  As pulps are being sent it is not necessary to include Blanks to check for contamination as the referee laboratory is not carrying out any preparation on the samples.  It would be more suitable to insert standards instead to confirm accuracy.

·As noted above for the Extension Area there is a higher than expected variation between the original and referee laboratory result possibly due to the fact that a different ¼ split of the core was sent to Genalysis rather than a pulp.  This variation should however be investigated further.

Notwithstanding the corrections required with mis-labelled standards in the database as well as the queries highlighted above, the data is deemed acceptable for the current resource estimation.

11.19Adequacy of Procedures

The assay techniques used are considered appropriate for the style of mineralization and the anticipated concentrations of the metals of interest.   The techniques are certified and sufficient laboratory QA/QC is undertaken to ensure the results can be relied upon.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 88
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

11.20Coffey: Technical Review

The drilling, sampling and analytical aspects of the project are considered to have been undertaken to industry standards.  The data is considered to be reliable and suitable for mineral resource estimation.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 89
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

12DATA VERIFICATION

The Quality Assurance and Quality Control program of PTM addresses all aspects of the exploration project to ensure high integrity of data obtained through drilling, sampling, assaying and recording of geological observations for the purpose of attaining an accurate geological model and a reliable mineral resource estimate.  The data has been verified by Coffey to a level satisfactory for Inferred Resource estimation and disclosure of the selected grade intervals.

12.1Accurate Placement and Survey of Borehole Collars

Boreholes were sited with a handheld GPS (Garmin GPSMAP 62) by the Project Geologist on an initial grid of 250m by 250m.  This grid was designed and laid out using ArcView GIS onto the known 1:250 000 Geological Map of the area along strike with section lines approximately perpendicular to the dip.  Coordinates were determined in ArcView GIS and electronically communicated to the Project Geologist.  The projected coordinate system, WG27, is a Transverse Mercator projection with the central meridian at 29, the D_Hartebeesthoek_1994 datum and WGS_1984 spheroid.  All borehole collar positions are permanently marked on completion and surveyed by an accredited surveyor.  This photograph illustrates the concrete block and steel rod marking the collar position of a drilled borehole (Figure 12.1_1).

Figure 12.1_1

Permanent Borehole Beacon

The borehole casings installed in all boreholes are left in the borehole and the boreholes are plugged and marked with a steel rod.  This provides access to the borehole if, at a later stage, it

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 90
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

is needed for any reason e.g. geophysical down-hole surveys or drilling of more deflections.  The borehole number is welded onto the rod.

12.2Downhole Surveys

The original boreholes as well as all deflections when applicable are surveyed with a down-hole survey instrument in order to accurately determine the coordinates of intersections and plot the deflection (off the vertical) of the original borehole.  Down-hole surveys have been conducted by the company, BCR Surveys, using a Reflex EZ-AQ/EMS down-hole survey instrument.

A random down-hole check survey (Waterberg JV Project) was being conducted by Digital Borehole Surveying Pty Ltd using a Gyro Smart tm instrument to confirm the accuracy of the reflex instrument.  All the down hole surveys for boreholes on the Waterberg Extension Project were conducted by Digital Borehole Surveying Pty Ltd using a Gyro Smart tm instrument.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 91
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

13MINERAL PROCESSING AND METALLURGICAL TESTING

Waterberg JV Project

Mineralogical characterisation was undertaken on samples from the F - Zone and T2 Layer by SGS in Johannesburg.  Scoping testwork indicated that both samples are fairly soft and mill easily.  Feed characterization showed that the T2 - Layer sample has a greater Pt, Pd, Au, Ni and Cu content than the F - Zone sample.  Quantitative mineralogy was carried out on composites to ascertain the mineral speciation, particle size and mode of occurrence (association, degree of liberation and exposure).  Based on the mineralogical properties, the T2 - Layer sample has better beneficiation properties than the F - Zone sample, since there is a greater degree of liberation and particle size.

Flotation testwork on both samples confirmed the mineralogical observations.  The T2 - Layer sample has a better rate of flotation and maximum recovery for the economic metals.  However, the T2 - Layer sample contains clayish minerals and floatable gangue, indicating a good plant operating requirement

Based on the scoping testwork, the estimated recovery for the precious metals are:

·2PGE (Pt,Pd)+Au: 88% (T2 - Layer) and 83% (F - Zone)

·Total Cu: 87% (T2 - Layer) and 74% (F - Zone)

·Total Ni: 83% (T2 - Layer) and 59% (F - Zone)

Two samples of F - Zone and the T2 - Layer material were delivered to SGS for flotation and mineralogical characterisation.  The flotation testwork was carried out at scoping level.  The mineralogical testwork consisted of petrographic and quantitative microscope analysis (QEMSCAN).  The analysis included petrography examination of the cores, and quantitative analysis of sample material milled to a grind of P80 75 µm.  A detailed analysis was carried out on each sample for Ni, Cu, Co, Zn, Pb, Fe, Cr and Mn plus Al2O3, SiO2, Fe2O3, MgO, MnO, CaO, K2O, Na2O, TiO2, P2O5, V2O5, Cr2O3.  F - Zone material feed assay was 3.24g/t 2PGE+Au and T2 - Layer 7.22g/t 2PGE+Au.

After milling to a grind of P80 75 µm, a single rougher-cleaner flotation test was carried out on each sample to determine the recovery and upgrading of PGMs, total Ni and total Cu.

While the T2 - Layer flotation response is good at 88% recovery, the best recovery on F - Zone material achieved in the testwork was 83%

Further test work supplied to Worley Parson’s was reported in the Preliminary Economic Assessment dated February 14, 2014.  This further work determined that concentrate grades of greater than 100 g/t could be achieved from the material tested from the T - and F - Zones without significant reductions in recoveries.

Further testwork should be carried out to establish optimum operating conditions including the likely grade and recovery of F - Zone material.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 92
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

Waterberg Extension Project

There has been no mineral processing or metallurgical testing completed on the mineralization encountered on the Waterberg Extension Project.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 93
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

14MINERAL RESOURCE ESTIMATES

The Mineral Resource Estimate section of this report is taken form the report dated 12 June 2014 and has not been changed from that last report. It is included for completeness.

Mineral resource estimates have been declared for both the T and F — Zone mineralization of the farms Ketting 368LR, Goedetrouw 366LR and Early Dawn 369LR.

Two primary mineralized layers have been identified in the T - Zone.  In the deeper F - Zone, based on lithological, mineralogical, geochemical and textural characteristics, seven different units (FP and FH1 to FH6) have been identified.  It is the identification of these units and the classification of historical exploration data to fit this new interpretation that is the primary difference between this and previous mineral resource estimates.

Table 14_1

Waterberg Project

Summary of the Mineral Resource Estimate Data

	Depth of modelling		Depth of intersection
Zone/Layer/Unit Designation	Min Depth (m)	Max Depth (m)	Min Depth (m)	Max Depth (m)	No of boreholes	No of Inter- sections	Mineral Resource Declared
T1	124	650	176	1,363	24	62	Yes
T2	127	1,250	141	1,370	26	69	Yes
FH5	88	1,250	232	1302	78	230	Yes
FH4	166	1,250	259	1311	67	194	Yes
FH3	190	1,250	330	1324	58	163	Yes
FH2	213	1,250	339	1289	49	137	Yes
FH1	218	1,250	348	1296	42	107	Yes

Based on the available data a mineral resource estimate has been undertaken.  Prior to declaration of the mineral resource, Coffey took into consideration the prospect that the project “has reasonable prospects for eventual economic extraction” as required by the SAMREC and CIM codes.

At the request of PTM, a Preliminary Economic Assessment (PEA) was compiled by Worley Parsons RSA, “The Preliminary Economic Assessment on Waterberg Joint Venture Project, Limpopo Province, South Africa” (14 February 2014).  The report represents the output of a Preliminary Economic Assessment undertaken by Worley Parsons RSA that commenced in August 2013.

The main objective of the study was to provide sufficient confidence that further studies (Pre- Feasibility) should be undertaken to further improve the confidence level of the Waterberg Joint Venture Project. The PEA is no longer valid as the Mineral Resource have changed and increased in scale.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 94
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

14.1Methodology

The data that formed the basis for the mineral resource estimate was an exploration database that contained the details of geological logging and assay values derived from a surface drilling programme.  The area where each zone/layer was present was delineated after examination of the intersections in the various boreholes (Figure 14.1_1).  A structural model of each layer was also created based on the intersections of the boreholes (Figure 14.1_2).

14.1.1T - Zone Estimation

The data was used to define the characteristics of the various layers based on their geological characteristics and geochemical signatures.  The core was carefully examined to ensure the designations and correlations were valid.  Diagnostic features were found to identify the T - Zone directly from the core.  A geological interpretation had previously been developed to assist in the understanding of the T — Zone characteristics (Figure 14.1.1_1).  The additional drilling confirmed the geological interpretation and understanding.

All the intersections were checked on the core to ensure that the layer designation was true to the core and consistency for all the deflections from a borehole.  These cuts formed the basis of the mineral resource estimate.  The cuts were also defined based on the geology, a marginal cut-off grade of 0.01g/t PGM and a minimum thickness of 2m.  Basic statistics were undertaken on the data noting that the data was clustered due to the number of deflections for each borehole.

Data in the estimate from the drilling completed by PTM consists of over a 69 intersections from 26 boreholes.  Each borehole was examined for completeness in respect of data (geology, sampling, collar coordinates and sample recovery) prior to inclusion in the estimate.

An inverse distance weighted (power 2) estimate was undertaken using the 3D software package CAE Mining Studio™.  A common seam block model was developed into which the estimate was undertaken.  A geological loss of 12.5% was applied based on the geological understanding of the deposit which is informed by the regular drilling grid of 250m x 250m.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 95
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

Figure 14.1.1_1

Waterberg Project

A Geological Interpretation of the T- Layer

14.1.2F - Zone Estimation

Previously the entire F - Zone was modelled as a single unit.  In the “Revised and Updated Mineral Resource Estimate for the Waterberg Platinum Project, South Africa — September 2013”.  The layering of mineralization within the broader F - Zone was modelled by defining areas where the nature of the mineralization was similar — a facies approach.  Distribution of grade values within the F - Zone was controlled by creating a geological block model with a flat base representing the base of the F - Zone and interpolating grade values using inverse distance weighted (power 2) interpolation methodology.  The model estimation search volume was set parallel with the base of the F - Zone.  The thickness of the F - Zone was modelled using the intersected thickness within each borehole as control points.  The report also documented a study of the relationship between rock types and mineralization.  It was determined that the mineralized portions were not directly related to specific rock types.

In the most recent data base, within each borehole, the intersection depths for each of unit (FP and FH1 to FH6) described above, were supplied as separate data files.  The improved understanding of the geometry and nature of the mineralization within the F - Zone has now made it possible to construct a three dimensional block model into which grade values have been interpolated.  PTM provided closed wireframe models that represent the volume of each of the F - Zone Units.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 96
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

Coffey studied these wireframe models in relation to the borehole logs and found there to be consistent correlation between the borehole data and the wireframe models.  Occasional inconsistencies were found, specifically in the wireframe defining the FH6 Unit.  Coffey does not, however, believe that these significantly affect the mineral resource estimate.

The most common sample thickness in the database is 1m and 0.5m.  Borehole intersections were composited for Pt, Pd, Au, Cu and Ni to 1m lengths across each Unit.  A minimum composite thickness of 50cm was permitted at bounding surfaces.  It was determined that each Unit is generally continuous across the project area.

For each F - Zone Unit a three dimensional block model was developed utilising the 3D software package CAE Mining Studio™.

Basic descriptive statistics were determined for the sample data within each of the mineralized layers, noting that data points are often spatially clustered because a number of deflections were usually drilled from each motherhole.

The area modelled is bounded in the south by the tenement boundary.  In the north the limit of the resource estimate is defined based on the spacing of the borehole intersections, specifically those located on Early Dawn 369LR.  The eastern extent is limited by the sub-outcrop.  The average elevation of the topography is 1040m above mean sea level.  The block models extend to an elevation of -210m, approximately 1250m below surface.  The Waterberg Group is open to the west.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 97
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

Figure 14.1_1

Area Underlain by the T- Layer and F - Zone

T - Zone

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 98
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

F - Zone

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 99
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

Figure 14.1_2

Waterberg Project

Isometric views of the Structural Model for the T- Layer and F - Zone

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 100
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

14.2Density

The density data for the majority of the pulps was measured by gas pycnometer.  As a result there are some gaps in the data.  The gaps were assigned values according to their lithology and the analysis described below.  It is noted that the methodology is not considered appropriate for the determination of bulk density.  However, there is no bulk density data (Archimedes method) which could be used to determine a conversion factor.

The existing data was used and applied to lithologies where no data existed based on the logged lithology.

14.3Compositing

The borehole intersections for the T — Zone intersections were composited for Pt, Pd, Rh, Au, Cu and Ni.  The compositing utilised the weighing of density and thickness.

For the F — Zone, the raw borehole data was composited to a constant 1m interval utilised the weighting of density and thickness.

14.4Descriptive Statistics: Composites

Detailed descriptive statistical analysis has been completed based on the total composite data for the mineralized layers.  Figure 14.4_1 and Figure 14.4_2

Figure 14.4_1

Summary of Statistics for the Composites of Each Layer

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 101
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

Figure 14.4_2

Summary of Statistics for the Composites of Each Layer

14.5Rhodium Analysis

The determination of Rh has not been undertaken for every sample submitted because the grades have generally been low and the analysis is very expensive.  In order to determine a factor, a suite of samples was analyzed for all the PGMs including Rh.  A regression analysis was undertaken to determine if a factor could be applied (Table 14.5_1 and Figure 14.5_1).  A comparison between the regression using Pt or Pd was undertaken with a range of difference between -1.5% to 6.6% and typically a difference of less than 0.01g/t Rh.  After analysis the grade of Pt was used as the factor for the addition of Rh (Table 14.5_2).

Table 14.5_1

Correlation Coefficient for Rh against other assayed elements

Correlation Coefficient (r2)	Number of Data	Pt	Pd	Au	Cu	Ni	Cr	S%
FH5	1,520	0.83	0.83	0.40	0.12	0.11	-0.17	0.09
FH4	1,106	0.61	0.60	0.23	-0.04	0.11	-0.35	-0.12
FH3	715	0.60	0.52	0.27	0.03	0.17	-0.42	-0.02
FH2	832	0.64	0.64	0.43	0.17	0.30	-0.42	0.14
FH1	748	0.43	0.46	0.23	0.07	0.18	-0.31	0.05

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 102
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

Figure 14.5_1

Correlation of Rh against Pt and Pd

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 103
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

Table 14.5_2

Correlation Factors for Rh

			Average grade Rh (g/t) using		Accuracy from
	Pt factor	Pd factor	Pt factor	Pd factor	Pt
FH5	0.83	0.83	0.06	0.07	2.2	%
FH4	0.61	0.60	0.05	0.04	-1.5	%
FH3	0.60	0.52	0.04	0.04	1.0	%
FH2	0.64	0.64	0.04	0.04	6.6	%
FH1	0.43	0.46	0.05	0.05	0.6	%

14.6Outlier Analysis

An assessment of the high-grade composite was completed to determine whether high-grade capping was required.  The approach taken to the assessment of the potential outliers is summarised as:-

·Detailed review of histograms with significant breaks in populations interpreted as possible outliers.

·The ranking of the composite data and the investigation of the influence of individual composites on the mean and standard deviation plots.

Based on this analysis no capping or cutting was required.

14.7Block Model Development

14.7.1T - Zone

A series of three-dimensional (3D) estimates representing each layer as defined by the geological logging and interpretation (Figure 14.7.1_1).  The block model cell size utilised was based on borehole spacing

Table 14.7.1_1

Summary of the Block Model Details (T — Zone)

	Block Model Origin (Centroid)				Sub cell
	Min	Max	Parent Cell Size	No of blocks	splitting
		T layer
XC	- 16,000	-7,000	200	45	No
YC	- 2,591,000	- 2,581,000	200	50	No

14.7.2F — Zone Units

The wireframe volumes supplied by PTM were checked by looking at a number of dip cross sections though the wireframes and though the borehole intersections from which they were created.  It was noted that the wireframes snapped on or very close to the top or bottom of the relevant sample.  Some areas were noted where the wireframe surface representing the top of one unit did not correspond precisely to the bottom surface of the overlaying unit.  Coffey

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 104
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

considers that these will cause only differences in volume estimates and are suitable for the estimation of mineral resources.

Separate Datamine block models were created for each unit: FH1, FH2, FH3, FH4, FH5, FH6 and FP.  The base of the model was set at an elevation of -210m below sea level.  This elevation is 1250m below the average surface elevation of 1040m above sea level.  In places the thickness of some of the units are very thin, particularly were one unit pinches out against another.  To accommodate this geometry, the dimensions of the models cells were set to constant dimensions of 10m x 10m in plan and 3m vertically.  After creating the block models, the volume of the block models were compared to the volume of the wireframes.  They were found to match within a faction of a percent.

Table 14.7.2_1

Summary of the Block Model Details (F — Zone Units)

	Block Model Origin (Base, West, South Corner)				Sub cell
	Min	Max	Parent Cell Size	No of blocks	splitting
		All F – Zone Units
XC	-15,000	-5,000	10	1000	No
YC	-2,590,000	-2,577,500	10	1250	No
ZC	-210	1221	3	477	No

14.8Mineral Resource Estimate

14.8.1T — Zone

A series of two-dimensional estimates based on the designated cut were undertaken.  Each deflection within the borehole database has been retained as separate data.  These deflections have been offset from the surveyed reef intersection location of the motherhole utilizing the downhole survey data.  Maintaining the individual deflections as separate data rather than compositing the deflections to a single intersection composite is preferred.

The structural model for the Waterberg separates the area into a number of fault blocks.  Coffey has treated all fault blocks together, as they would have originally been continuous.

The precision of a block estimate is a function of the block size, the amount of local data, the method of estimation and the estimation technique.  A block size of 200m x 200m was selected based on the distribution of the boreholes.  The block model was not rotated.

The variables Pt, Pd, Au, Cu and Ni as well as the thickness and density were estimated directly.  Rh was not estimated as the assay of Rh was only commissioned where the combined Pt+Pd+Au>1g/t.  The result is therefore considered biased.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 105
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

14.8.2F — Zone

Layer Modelling

Previous mineral resource estimates of the F - Zone have identified separate areas of grade and thickness of the entire F - Zone.  A better understanding of the mineralization has resulted in the definition of seven conformable layers: FP and FH1 to FH6.  Coffey considers that the control of mineralization can be better modelled using these layers than using the previous facies approach.

A number of structural faults have been identified in the project area.  These have been taken into account in the modelling of the Unit wireframes.

Grade Interpolation

The dip and dip direction of every triangle in each wireframe volume were calculated.  This information was interpolated into the geological models using a nearest neighbour search.

Grade values for Pt, Pd, Au, Cu, Ni and density were interpolated into the structural models using an inverse distance squared (IDW) methodology using a dynamic search ellipsoid.

Each deflection within the borehole database has been retained as separate data.  The deflections are offset from the motherhole by utilising the borehole survey data.  Retaining the deflections, rather that averaging the deflections into a single intersection is preferred.

The reported grade of platinum group metals (2PGE+Au) was derived by adding the interpolated values of Pt, Pd and Au.

A visual and statistical review was completed on the estimates prior to accepting the model.  Acceptable levels of mean reproduction were noted between the block model and input composited data.  Coffey considers the resource estimate to be appropriate and robust.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 106
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

14.9Search Criteria

The estimation search criteria for the estimation of grade and density values took into account the orientation of the layering, the spacing of the borehole data, presence of close spaced intersections (deflections) and samples within each intersection.  A three-pass estimation strategy was used, applying progressively expanded and less restrictive sample searches to successive estimation passes, and only considering blocks not previously assigned an estimate.  The parameters were determined after consideration of the method of estimation and the data density.  The sample search and estimation parameters are provided in Table 14.9_1.

Table 14.9_1

Waterberg Project

Estimation Search Parameters (F — Layers)

Search Parameter	Value
Anisotropy	Omnidirectional
	First	Second	Third
Search volume radius — plan	500m	1500m	1500m
Search volume radius - vertical	9m	18m	18m
Minimum number of samples	12	12	3
Maximum number of samples	36	36	36
Maximum number of samples per borehole		3
Dip direction of search ellipsoid	Interpolated into model
Dip direction of search ellipsoid	Interpolated into model

A visual and statistical review was completed on the estimates prior to accepting the model.  Acceptable levels of mean reproduction are noted between the block model and input composite data.  Coffey considers the resource estimate to be appropriate and robust.

14.10Cut-off Grades

The approach to the estimate utilised typical estimation techniques in which the determination of the mining cut is critical as the initial step.  This effectively defines the mineralized unit.  The important aspects were the stratigraphic determination and correlation between intersections.  As the mineralization is disseminated within the stratigraphy, the selection of a marginal cut-off and consideration of a potential mining cut are necessary.  In addition the area underlain by each layer was delineated based on the borehole intersections.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 107
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

A cut-off grade was applied to the T1 Layer block model in order to ensure that the mineralized layer has “reasonable and realistic prospects for eventual economic extraction” (SAMREC, 2009).  A block cut off grade of 2g/t for the 2PGE+Au grade was applied.

No cut-off was applied to the T2 Layer block model.

A cut-off grade was applied to the F — Zone block model in order to ensure that the mineralized layer has “reasonable and realistic prospects for eventual economic extraction” (SAMREC, 2009).  A block cut-off grade of 2g/t for the 2PGE+Au grade was applied.

14.11Geological Loss

Two areas were defined defining areas where geological loss of 25% and 12.5% were applied.  These were based primarily on the spacing of surface boreholes and on the knowledge of this type of deposit.  These areas are indicated on Figure 14.11_1.  The geological losses are made up of areas where the layers are absent due to faults, dykes and mafic/ultramafic pegmatites.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 108
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

Figure 14.11_1

Waterberg JV Project

Areas of Geological Loss for the T- Layer and F - Zones

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 109
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

14.12Classification

Coffey considers that the mineral resource of the various layers should be classified as an Inferred Mineral Resource.  The data is of sufficient quality and the geological understanding and interpretation are considered appropriate for this level of mineral resource classification.  The resource estimate has been classified based on the criteria set out in Table 14.12_1.

Table 14.12_1

Waterberg JV Project

Confidence Levels of Key Criteria

Items	Discussion	Confidence
Drilling Techniques	Diamond drilling - Industry Standard approach	High
Logging	Standard nomenclature and apparent high quality.	High
Drill Sample Recovery	Based on site visits the core recovery is estimated as >95%	High
Sub-sampling Techniques and Sample Preparation	Industry standard	High
Quality of Assay Data	Available data is of industry standard quality.	High
Verification of Sampling and Assaying	Verification of sampling undertaken	High
Location of Sampling Points	Survey of all collars. Vertical boreholes with typically small deviation.	High
Data Density and Distribution	Boreholes spaced across the property.	Low
Audits or Reviews	None of which Coffey is aware	High
Tonnage Factors (Bulk Density)	Based on specific gravity data	Low/Moderate
Database Integrity	Minor errors identified and rectified. Data scrutinised prior to inclusion in resource model database.	Moderate
Geological Interpretation	The broad structural confidence but the zones determined are previously not identified the Bushveld Complex.	Moderate
Compositing	Single composites were used for each mineralized unit for each intersection.	High
Statistics	High coefficient of variation for the variables modelled and relatively well defined statistical distributions.	Low
Block size	Appropriate block size selected	Moderate
Estimation and Modelling Techniques	Inverse Distance Weighting	Moderate
Cut-off Grades	A marginal cut off applied when determining the cuts (0.01g/t PGM and minimum cut of 2m) on which the estimate is based	High
Mining Factors or Assumptions	Preliminary Economic Assessment undertaken	Moderate
Metallurgical Factors or Assumptions	Preliminary Economic Assessment undertaken	Moderate

The classification of the mineral resource estimate was underlain in accordance with requirements and guidelines of The South African Code for the Reporting of Exploration Results, Mineral Resources And Mineral Reserves (The SAMREC Code) (2007 Edition as amended July 2009).

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 110
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

The reconciliation of the SAMREC Code classification with the CIM Standards (2010) indicates that the criteria for classification and the classes of mineral resource are compatible.

The CIM 2014 standard adds a condition that further exploration could reasonably be expected to upgrade the Inferred Mineral Resource to Indicated Mineral Resource. The Mineral Resource reported here meets the requirements of the CIM standard.

It should be noted that an Inferred Mineral Resource has a degree of uncertainty attached.  It cannot be assumed that all or any part of an inferred mineral resource will ever be upgraded to a higher category.  No assumption can be made that any part or all of mineral deposits in this category will ever be converted into mineral reserves.

14.13Mineral Resource Reporting

Metal contents and block tonnages were accumulated and formed the basis for reporting the resource estimate.  The results are presented in Table 14.13_1 and Table 14.13_2.

Mineral resources which are not mineral reserves do not have demonstrated economic viability.  The estimate of mineral resources may be materially affected by environmental, permitting, legal, marketing, or other relevant issues.

The quantity and grade of reported Inferred Mineral Resources in this estimate are conceptual in nature.  There is no guarantee that all or any part of the Mineral Resource will be converted to a Mineral Reserve.

The independent Qualified Persons responsible for the mineral resource estimate in this report and summarized in Table 14.13_1 are Kenneth Lomberg and Alan Goldschmidt.  Mr. Lomberg is a geologist with some 29 years’ experience in mine and exploration geology, resource and reserve estimation and project management in the minerals industry (especially platinum and gold).  He is a practising geologist registered with the South African Council for Natural Scientific Professions (Pr.Sci.Nat.) and is independent of Platinum Group Metals Ltd as that term is defined in Section 1.5 of the Instrument.

Mr. Goldschmidt, a geologist with some 29 years’ experience in minerals industry.  He has been primarily involved with geological block models and geostatistical resource estimation.  He is a practising geologist registered with the South African Council for Natural Scientific Professions (Pr.Sci.Nat.) and is independent of Platinum Group Metals Ltd as that term is defined in Section 1.5 of the Instrument.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and	Page 111
Waterberg Extension Projects South Africa — 16 December 2014

Coffey Mining South Africa (Pty) Ltd

Table 14.13_1

Waterberg Project

F - Zone

	Tonnes	Pt	Pd	Rh	Au	2PGE+Au	Cu	Ni	Pt	Pd	Rh	Au	PGE+Au	Cu	Ni
Unit	Mt	g/t	g/t	g/t	g/t	g/t	%	%	Moz	Moz	Moz	Moz	Moz	(‘000)t	(‘000)t	Pt:Pd:Rh:Au
FH5	116.90	0.92	1.94	0.05	0.14	3.05	0.07	0.20	3.46	7.28	0.18	0.53	11.45	86	228	30:64:2:5
FH4	46.32	0.91	1.90	0.04	0.14	3.00	0.08	0.19	1.36	2.84	0.07	0.20	4.47	37	87	30:64:2:5
FH3	40.33	0.88	1.91	0.04	0.14	2.98	0.10	0.21	1.14	2.48	0.05	0.19	3.87	40	83	30:64:1:5
FH2	21.47	0.74	1.82	0.04	0.12	2.72	0.08	0.18	0.51	1.26	0.03	0.08	1.88	17	39	27:67:1:4
FH1	7.80	0.93	2.32	0.05	0.15	3.46	0.07	0.18	0.23	0.58	0.01	0.04	0.87	6	14	27:67:1:4
	232.82	0.90	1.93	0.05	0.14	3.01	0.08	0.19	6.707	14.438	0.341	1.043	22.529	186	451	30:64:2:4

Individual numbers may not add up due to rounding

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 112

Coffey Mining South Africa (Pty) Ltd

Table 14.13_2

Waterberg Project-

Mineral Resource Estimate (SAMREC Code) (12 June 2014)

	StratigraphicThickness(m)	TonnageMt	Pt (g/t)	Pd (g/t)	Rh (g/t)	Au (g/t)	PGE+Au (g/t)	Pt:Pd:Rh:Au	PGE+Au (koz)	Cu (%)	Ni (%)	Cu (Mlbs)	Ni (Mlbs)
T1(Cut-off=2g/t)	2.44	10.49	1.02	1.52		0.47	3.01	34:50:0:16	1,015	0.17	0.10	40	23
T2	3.87	43.57	1.14	1.99		0.82	3.95	29:50:0:21	5,540	0.17	0.09	167	90
T Total	3.60	54.06	1.12	1.90		0.75	3.77	30:50:0:20	6,555	0.17	0.10	207	114
F(Cut-off=2g/t)	2.75-60	232.82	0.90	1.93	0.05	0.14	3.01	30:64:2:4	22,529	0.08	0.19	409	994
Total		286.88	0.94	1.92	0.04	0.25	3.15	30:61:1:8	29,084	0.10	0.18	617	1,107
Content (koz)			8,652	17,741	341	2,350			kt	280	502

Waterberg Project- (JV)

	StratigraphicThickness(m)	TonnageMt	Pt (g/t)	Pd (g/t)	Rh (g/t)	Au (g/t)	PGE+Au (g/t)	Pt:Pd:Rh:Au	PGE+Au (koz)	Cu (%)	Ni (%)	Cu (Mlbs)	Ni (Mlbs)
T1(Cut-off=2g/t)	2.44	10.49	1.02	1.52		0.47	3.01	34:50:0:15	1,015	0.17	0.10	40	23
T2	3.87	43.57	1.14	1.99		0.82	3.95	29:50:0:21	5,540	0.17	0.09	167	90
T Total	3.60	54.06	1.12	1.90		0.75	3.77	30:50:0:20	6,555	0.17	0.10	207	114
F(Cut-off=2g/t)	2.75-60	164.58	0.88	1.91	0.05	0.13	2.97	30:64:2:4	15,713	0.07	0.18	247	649
Total		218.64	0.94	1.91	0.03	0.29	3.17	30:60:1:9	22,268	0.09	0.16	455	763
Content (koz)			6,605	13,407	239	2,018			kt	207	346

Waterberg Project- (Ext)

	StratigraphicThickness(m)	TonnageMt	Pt (g/t)	Pd (g/t)	Rh (g/t)	Au (g/t)	PGE+Au (g/t)	Pt:Pd:Rh:Au	PGE+Au (koz)	Cu (%)	Ni (%)	Cu (Mlbs)	Ni (Mlbs)
F(Cut-off=2g/t)	2.75-60	68.04	0.93	1.98	0.05	0.15	3.11	30:64:2:4	6,802	0.11	0.23	162	344
Total		68.04	0.93	1.98	0.05	0.15	3.11	30:64:2:4	6,802	0.11	0.23	162	344
Content (koz)			2,043	4,325	102	331			kt	73	156

The T-Zone cut-off is reported as 2PGE +Au and the F - Zone cut-off is reported as 3PGE +Au grade

Individual numbers may not add up due to rounding

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 113

Coffey Mining South Africa (Pty) Ltd

15ADJACENT PROPERTIES

Numerous mineral deposits have been outlined along the northern limb of the Bushveld Complex.  Kenneth Lomberg, the qualified person for this report, has been unable to verify the information on these deposits which is not necessarily indicative of the mineralization on the property that is the subject of this technical report.  The T - Zone on the Waterberg JV Project are in a different position in the northern limb geology as reported at the other deposits and the T - Zones have distinctively different metal ratios with elevated gold values compared to the reported other deposit grades.  The F - Zones have some similarities to the other northern limb deposits in metal prill splits however there may be distinct differences in the geological units containing the mineralization.

15.1The Pan Palladium/Impala Platinum JV

The Pan Palladium/Impala Platinum JV on the most northern farm on Platreef outcrop has reported resources of 50Mt at 1.19 g/t (2PGE+Au), 0.07% Ni, 0.21% Cu (Pan Palladium Annual Report, 2003).  Kenneth Lomberg, the qualified person for this report, has been unable to verify the information on which it is based.  It is noted that this estimate is not necessarily indicative of the mineralization on the property that is the subject of this technical report.

15.2Mogalakwena Mine

Some 60km south of the project is the world’s largest opencast platinum mine, Mogalakwena Mine (formerly Potgietersrust Platinum Mine), which mines the Platreef and produced 304,800 platinum ounces in 2013.  The latest Mineral Resource and Reserve statement for Mogalakwena Mine is available on the website www.angloplatinum.com and Anglo Platinum Annual Report 2013.

15.3Akanani Project

Akanani Project, majority held by Lonmin, is downdip of the Anglo Platinum Mogalakwena Mine, is an exploration project with studies continuing to develop it into a viable operation.  Information pertaining to this project including the latest mineral resource and reserve statement are available on the Lonmin website (www.lomin.com) and in their latest Annual Report 2013.

15.4Boikgantsho Project

Located on the northern limb of the Bushveld Complex, and adjacent to Anglo Platinum’s Mogalakwena Mine, this project was acquired through a land acquisition by Atlatsa Resources (formerly Anooraq Resources) in 2000 and a joint venture with Anglo Platinum in 2004.  Historically, exploration drilling has been conducted at the project site which has led to the estimate of indicated and inferred Mineral Resources.  A preliminary economic assessment was completed in 2005; the results of this work showed that the project warrants further investigation.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 114

Coffey Mining South Africa (Pty) Ltd

Details of the project as well as mineral resource and reserve information is available via the company website (www.atlatsaresources.co.za)

15.5Harriet’s Wish and Aurora Projects

Sylvania Resources is undertaking exploration activities on the extreme northern end of the northern limb on the farm Harriet’s Wish which is adjacent to and contiguous with the southern boundary of the Waterberg JV Project.  According to Sylvania, the northern portion of Harriet’s Wish is covered by the Waterberg Sediments and the boreholes have intersected PGM mineralization with descriptions similar to that of mineralization found in the Waterberg JV Project.  The author has not been able to verify this data.  No mineral resource or reserve has been declared.  (www.sylvaniaplatinum.com)

15.6Platreef Project (Ivanplats)

The Platreef Project, is jointly owned by Ivanplats (90%) and a Japanese consortium of Itochu Corporation; Japan Oil, Gas and Metals National Corporation (JOGMEC) and JGC Corporation (10%).  The Platreef Project is a recently discovered underground deposit of thick, PGM-nickel-copper mineralization on the southern end of the northern limb of the Bushveld Complex (close to Mokpane).  The Platreef Project hosts the southern sector of the Platreef on three contiguous properties: Turfspruit, Macalacaskop and Rietfontein.

Ivanplats has delineated a large zone of mineralization within the Platreef, which essentially comprises a steeply-dipping, near-surface mineralized area and a gently-dipping to subhorizontal (<15º) deeper zone from approximately 700m depth downward (the “Flatreef”).  The mineralization is considered open for expansion along the southern and western boundaries of the Flatreef deposit.  The northernmost property, Turfspruit, is contiguous with, and along strike from, Anglo Platinum’s Mogalakwena group of properties and mining operations.  A mineral resource and a mineral reserve have been declared.  (www.ivanplats.com)

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 115

Coffey Mining South Africa (Pty) Ltd

16OTHER RELEVANT DATA AND INFORMATION

To the best of the author’s knowledge there is no other relevant data or information, the omission of which would make this report misleading.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 116

Coffey Mining South Africa (Pty) Ltd

17INTERPRETATION AND CONCLUSIONS

The Waterberg JV Project and Waterberg Extension Project are two adjoining projects that are located on the northern extension of the Bushveld Complex.  These two projects are at different stages of exploration maturity and are controlled under separate ownership structures.

Since the 12 June-2014 mineral resource estimate an additional 71,459m of diamond drilling have been completed at the Waterberg JV and Waterberg Extension Projects combined. The drilling program has been successful at expanding and detailing the Waterberg T, F and Super F zones as part of a continuing prefeasibility study.

The findings of a Preliminary Economic Assessment, compiled by Worley Parsons RSA (Pty) Ltd.  were taken into consideration, to confirm that the mineral resource “has a reasonable prospect for economic extraction”.

Waterberg JV Project

The exploration undertaken confirmed the presence of Bushveld Rocks under the Waterberg Group rocks on the Waterberg JV Project.  Exploration confirmed the presence of elevated PGM concentrations in zones/layers of identified mineralization.  The mineralization is consistent with layered magmatic sulphide deposits and displays characteristics of a geological setting, including the ratio of precious metals in the T - Zone that differs from other locations in the Bushveld Complex.

It has been possible to determine and declare a mineral resource for the identified mineralized layers on the Waterberg JV and Waterberg Extension Projects.  The continuity of the mineralized layers between the 111 boreholes allowed for the resource estimate to be made over a length of 5.5km and given the nature of the mineralization, it can be stated that the zones are open down-dip and along strike.

Waterberg Extension Project

The exploration undertaken on the Waterberg Extension Project has confirmed the northward strike extension of Bushveld Complex rocks under the Waterberg Group cover rocks.  Continued exploration drilling has confirmed the presence of elevated PGM concentrations in zones/layers of identified mineralization.  The mineralization is consistent with layered magmatic sulphide deposits and displays characteristics of a geological setting that differs from other locations in the Bushveld Complex and has been included in the mineral resource estimation.

Geophysical surveys including airborne gradient gravity and magnetics, ground gravity and regional government magnetics and gravity display characteristics similar to those associated known mineralization on the Waterberg JV Project.  Modelling of gravity survey data shows areas of higher density extending a further 25km northeast and curving to north within the Waterberg Extension

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 117

Coffey Mining South Africa (Pty) Ltd

Project area.  These high density zones are targets for drill testing to test for the presence of dense mafic intrusive rocks of the Bushveld Complex that may host sulphide mineralization with elevated PGM values.

The continuity of the mineralized layers based on the geophysical information and the drilling allowed for the mineral resource estimate to be completed over a strike length of 9km.  Based on the available information, the nature of the mineralization, the mineralized zones are expected to continue both down-dip and along strike.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 118

Coffey Mining South Africa (Pty) Ltd

18RECOMMENDATIONS

Waterberg JV Project

It is recommended that exploration drilling be completed as planned to advance the geological confidence in the deposit through infill drilling.  This will provide more data for detailed logging and refined modelling.  This is expected to confirm the geological continuity and allow the declaration of an Indicated Mineral Resource.  Consideration is recommended to commence with a Pre-feasibility Study.  The Pre-feasibility Study will require the upgrading of the Mineral Resource to the indicated category and a positive economic model. The estimated budget would be US$15 million.

Waterberg Extension Project

Given the results of the diamond drilling on the Waterberg Extension Project and the extent of target areas generated by geophysical surveys, the completion of the planned exploration drilling is recommended north of the location of the current exploration programme.  The objective of the exploration drilling would be to find the limit of the current deposit, confirm the understanding of the F — Zone and allow appropriate selection of the potential mining cut as well as improve geoscientific confidence in order to be able to declare an Indicated Mineral Resource.  It is recommended that 20,000m of drilling, at an estimated cost of US$2 million, be undertaken.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 119

Coffey Mining South Africa (Pty) Ltd

19REFERENCES

Barker OB, Brandl G, Callaghan CC, Erickson PG, van der Neut M.  (2006).  The Soutpansberg and Waterberg Groups and the Blouberg Formation.  In Johnson MR, Anhasueer CR and Thomas RJ (Eds).  The Geology of South Africa.  Geological Society of South Africa.  Johannesburg/Council of Geoscience, Pretoria, 301 — 318

Bumby AJ.  (November 2000)  The geology of the Blouberg Formation, Waterberg and Soutpansberg Groups in the area of Blouberg mountain, Northern Province, South Africa.  Doctor of Philosophy thesis (unpublished), Faculty of Science University of Pretoria.

CIM DEFINITION STANDARDS - For Mineral Resources and Mineral Reserves Prepared by the CIM Standing Committee on Reserve Definitions Adopted by CIM Council on November 27, 2010

Cawthorn RG, Eales HV, Walvaren F, Uken R, Watkeys MK (2006).  The Bushveld Complex.  In Johnson MR, Anhasueer CR and Thomas RJ (Eds).  The Geology of South Africa.  Geological Society of South Africa.  Johannesburg/Council of Geoscience, Pretoria, 261 — 282

De Waal S, McCarthy S,  Meadon H, Green B, Vermaak V, Vlock N, Govender T, Lambert P, Schweitzer J.  (16 April 2007).  Target generation report.  Internal Report (S0103/07-1) by Shango Solutions

Kinnaird, JA, Hutchinson, D, Schurmann, L, Nex, PAM and de Lange, R.  (2005).  Petrology and mineralization of the southern Platreef: northern limb of the Bushveld Complex, South Africa; Mineralium Deposita 40, p.  576-597

Lomberg, KG (5 November 2012).  Updated Exploration Results and Mineral Resource Estimate for the Waterberg Platinum Project, South Africa.  (Latitude 23° 21′ 53”S, Longitude 28° 48′ 23”E) NI 43-101 prepared for Platinum Group Metals.

Lomberg, KG (1 September 2012).  Exploration Results and Mineral Resource Estimate for the Waterberg Platinum Project, South Africa.  (Latitude 23° 21′ 53”S, Longitude 28° 48′ 23”E) NI 43-101 prepared for Platinum Group Metals.

Lomberg, KG (9 December 2013).  Amended and Combined Technical Report, Waterberg Joint Venture and Waterberg Extension Projects, South Africa (Latitude 23° 22′ 01”S, Longitude 28° 49′ 42”E) NI 43-101 prepared for Platinum Group Metals.

Lomberg, KG, Mckinney, R.L.  (31 January 2013).  Waterberg JV Project — QA/QC for data to end of January 2013.  Memorandum prepared for Platinum Group Metals.

Lomberg, KG, Goldschmidt, A (2 September 2013) Revised and Updated Mineral Resource Estimate for the Waterberg Platinum Project, South Africa (Latitude 23° 22′ 01”S, Longitude 28° 49′ 42”E) NI 43-101 prepared for Platinum Group Metals.

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 120

Coffey Mining South Africa (Pty) Ltd

Lomberg, KG, Goldschmidt, A (12 June 2014) Revised and Updated Mineral Resource Estimate for Waterberg Joint Venture and Waterberg Extension Projects, South Africa (Latitude 23° 14’ 11”S, Longitude 28° 54’ 42”E) NI 43-101 prepared for Platinum Group Metals.

McCarthy, TS (12 October, 2012).Observations on the Geology of PTM’s Waterberg Prospect.  Report prepared for Platinum Group Metals.

Schouwstra RP, Kinloch ED, Lee CA (2000).  A Short Geological Review of the Bushveld Complex.  Platinum Minerals Rev., 2000, 44, (1).  33-39

Roberts, M, Lomberg, KG, (14 February 2014).  Preliminary Economic Assessment on Waterberg Joint Venture Project, Limpopo Province, South Africa by Worley Parsons RSA

Sharman-Harris, E (2006).  Geochemical and Isotopic Studies of the Platreef with special emphasis on Sulphide Mineralisation.  Master’s Thesis (unpublished)

Van Buren R (May 2013) Interpretation Report for Platinum Group Metals Ltd.  Waterberg Project.  Internal report (FCR2602) by FUGRO Airborne Surveys (pty) Ltd.

Van Reenen DD, Roering C, Ashwal LD and de Wit MJ (1992).  Regional geological settings of the Limpopo Belt.  Precambrian Res., 55.  1-5

Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and
Waterberg Extension Projects South Africa — 16 December 2014 Page 121

Appendix A

Authors Certificate

Certificate of Qualified Person

As the author of the report entitled “Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and Waterberg Extension Projects, South Africa.  (Latitude 23° 14’ 11”S, Longitude 28° 54’ 42”E)” dated effective 21 October 2014 (the “Report”), I hereby state:

1.My name is Kenneth Graham Lomberg and I am Principal Consultant Resources with the firm of Coffey Mining South Africa Pty.  Ltd. of 604 Kudu Avenue, Allen’s Nek 1737, Gauteng, South Africa.

2.I am a practising geologist registered with the South African Council for Natural Scientific Professions (Pr.Sci.Nat.).

3.I am a graduate of the University of Cape Town and hold a Bachelor of Science with Honours (Geology) degree (1984) from this institute.  I also hold a Bachelor of Commerce degree (1993) from the University of South Africa and a Masters in Engineering (2011) from The University of the Witwatersrand.

4.I have practiced my profession continuously since 1985.  I have over 5 years of relevant experience having completed mineral resource estimations on various properties located on the Bushveld Complex hosting Magmatic Layered Intrusive style mineralization including for the Waterberg Joint Venture and Waterberg Extension Projects.

5.I am a “qualified person” as that term is defined in and for the purposes of the National Instrument 43-101 (Standards of Disclosure for Mineral Projects) (the “Instrument”).

6.I have performed consulting services and reviewed files and data supplied by Platinum Group Metals Ltd on the Waterberg Joint Venture Project between April 2013 and September 2013 and on the Waterberg Extension Project since October 2013.

7.I have visited site on 16-18 April 2012, 16—18 August 2012, 21—22 August 2012, 13-15 January 2013, 24 - 25 July 2013, 8 November 2013, 24-25 March 2014, 6-7 October 2014.

8.I prepared all sections of the report and am responsible for the Report.

9.I am not aware of any material fact or material change with respect to the subject matter of the Report, which is not reflected in the Report, the omission of which would make the Report misleading.

10.I am independent of Platinum Group Metals Ltd pursuant to section 1.5 of the Instrument.

11.I have read the Instrument and Form 43-101F1 (the “Form) and the Report has been prepared in compliance with the Instrument and the Form.

12.I do not have nor do I expect to receive a direct or indirect interest in the Mineral Properties of Platinum Group Metals Ltd, and I do not beneficially own, directly or indirectly, any securities of Platinum Group Metals Ltd or any associate or affiliate of such company.

13.I have not been involved in any capacity on the Waterberg Joint Venture Project prior to April 2012 after which time I prepared an independent mineral resource estimate on the Waterberg Joint Venture Project

(F - Zone).  I have not been involved in any capacity on the Waterberg Extension Project prior to October 2013.

14.At the effective date of the Report, to the best of my knowledge, information and belief, the Report contains all scientific and technical information that is required to be disclosed to make the Report not misleading.

Dated at Johannesburg, South Africa, on 16 December 2014

Kenneth Lomberg Senior Principal	B.Sc Hons (Geology), B.Com, M.Eng., Pr.Sci.Nat.

Certificate of Qualified Person

As the author of the report entitled “Amended and Restated Technical Report for the Update on Exploration Drilling at the for Waterberg Joint Venture and Waterberg Extension Projects, South Africa.  (Latitude 23° 14’ 11”S, Longitude 28° 54’ 42”E)” dated effective 21 October 2014 (the “Report”), I hereby state:

1.My name is Alan Bernard Goldschmidt and I am Senior Consultant Resources with the firm of Coffey Mining South Africa Pty.  Ltd. of 604 Kudu Avenue, Allen’s Nek 1737, Gauteng, South Africa.

2.I am a practising geologist registered with the South African Council for Natural Scientific Professions (Pr.Sci.Nat.).

3.I am a graduate of the University of Cape Town and hold a Bachelor of Science with Honours (Geology) degree (1987) from this institute.  I also hold a Graduate Diploma, Mining Engineering (1991) from The University of the Witwatersrand.

4.I have practiced my profession continuously since 1988.  I have over 5 years of relevant experience having completed mineral resource estimations on various properties.

5.I am a “qualified person” as that term is defined in and for the purposes of the National Instrument 43-101 (Standards of Disclosure for Mineral Projects) (the “Instrument”).

6.I have performed consulting services and reviewed files and data supplied by Platinum Group Metals Ltd between April 2013 and September 2013.

7.I have visited the Waterberg Platinum Project for personal inspection on 24-25 July 2013.

8.I contributed to sections 1, 7, 9, 10, 11, 12, 14, 17, 18 of this report and am responsible for these sections.

9.I am not aware of any material fact or material change with respect to the subject matter of the Report, which is not reflected in the Report, the omission of which would make the Report misleading.

10.I am independent of Platinum Group Metals Ltd pursuant to section 1.5 of the Instrument.

11.I have read the National Instrument and Form 43-101F1 (the “Form) and the Report has been prepared in compliance with the Instrument and the Form.

12.I do not have nor do I expect to receive a direct or indirect interest in the Mineral Properties of Platinum Group Metals Ltd, and I do not beneficially own, directly or indirectly, any securities of Platinum Group Metals Ltd or any associate or affiliate of such company.

13.I have not been involved in any capacity on the Waterberg Platinum Project prior to April 2013.

14.At the effective date of the Report, to the best of my knowledge, information and belief, the Report contains all scientific and technical information that is required to be disclosed to make the Report not misleading.

Dated at Johannesburg, South Africa, on 16 December 2014

Alan Goldschmidt Senior Consultant	B.Sc Hons (Geology), GDE., Pr.Sci.Nat.

EX-99.2

Exhibit 99.2

CONSENT OF QUALIFIED PERSON

December 19, 2014

To:	British Columbia Securities Commission
	Alberta Securities Commission
	Saskatchewan Financial Services Commission
	The Manitoba Securities Commission
	Ontario Securities Commission
	Autorité des marchés financiers
	New Brunswick Securities Commission
	Nova Scotia Securities Commission
	Prince Edward Island Securities Office
	Government of Newfoundland and Labrador
	Toronto Stock Exchange
	NYSE MKT, LLC
	Platinum Group Metals Ltd.
Dear Sirs and Mesdames:

RE:Platinum Group Metals Ltd. (the “Company”)

1.I, Alan Bernard Goldschmidt, consent to the public filing of the technical report titled “Amended and Restated Technical Report for the Update on Exploration Drilling at the Waterberg Joint Venture and Waterberg Extension Projects, South Africa” dated December 16, 2014 (the “Technical Report”).

2.I also consent to the use of extracts from, or a summary of, the Technical Report in the Company’s Final Short Form Prospectus dated December 19, 2014 all supplements thereto and all documents incorporated by reference therein (collectively, the “Prospectus”).

3.I confirm that I have read the Prospectus and that the Prospectus fairly and accurately represents the information in the parts of the Technical Report that I am responsible for.

/s/ Alan Bernard Goldschmidt

Alan Bernard Goldschmidt

B.Sc. (Hons) Geology, GDE, Pr.Sci.Nat., MGSSA

Coffey Mining (SA) Pty. Ltd.

EX-99.3

Exhibit 99.3

CONSENT OF QUALIFIED PERSON

December 19, 2014

To:	British Columbia Securities Commission
	Alberta Securities Commission
	Saskatchewan Financial Services Commission
	The Manitoba Securities Commission
	Ontario Securities Commission
	Autorité des marchés financiers
	New Brunswick Securities Commission
	Nova Scotia Securities Commission
	Prince Edward Island Securities Office
	Government of Newfoundland and Labrador
	Toronto Stock Exchange
	NYSE MKT, LLC
	Platinum Group Metals Ltd.
Dear Sirs and Mesdames:

RE:Platinum Group Metals Ltd. (the “Company”)

1.I, Kenneth Graham Lomberg, consent to the public filing of the technical report titled “Amended and Restated Technical Report for the Update on Exploration Drilling at the Waterberg Joint Venture and Waterberg Extension Projects, South Africa” dated December 16, 2014 (the “Technical Report”).

2.I also consent to the use of extracts from, or a summary of, the Technical Report in the Company’s Final Short Form Prospectus dated December 19, 2014 all supplements thereto and all documents incorporated by reference therein (collectively, the “Prospectus”).

3.I confirm that I have read the Prospectus and that the Prospectus fairly and accurately represents the information in the Technical Report.

/s/ Kenneth Graham Lomberg

Kenneth Graham Lomberg

B.Sc. (Hons) Geology, BCom, M. Eng., Pr.Sci.Nat., FGSSA

Coffey Mining (SA) Pty. Ltd.