UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C.
20549
FORM 6-K
Report of Foreign Private Issuer
Pursuant to Rule
13a-16 or 15d-16
of the Securities Exchange Act of 1934
For the period of: April 19, 2016
Platinum Group Metals Ltd.
(SEC
File No. 001-33562)
Suite 788 550 Burrard Street, Vancouver BC, V6C 2B5, CANADA
Address of Principal Executive Office
Indicate by check mark whether the registrant files or will file annual reports under cover:
Form 20-F [ ] | Form 40-F [X] |
Indicate by check mark if the registrant is submitting the Form 6-K in paper as permitted by Regulation S-T Rule 101(b)(1): [ ]
Indicate by check mark if the registrant is submitting the Form 6-K in paper as permitted by Regulation S-T Rule 101(b)(7): [ ]
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
Date: April 19, 2016 | R. Michael Jones |
R. MICHAEL JONES | |
DIRECTOR & CEO |
EXHIBIT INDEX
Exhibit | Description |
99.1 | News Release dated April 19, 2016 |
99.2 | Material Change Report dated April 19, 2016 |
788 550 Burrard Street Vancouver, BC V6C 2B5 P: 604-899-5450 F: 604-484-4710 |
News Release | No. 16-320 |
April 19, 2016 |
Platinum Group Metals Reports 13% Increase in F Zone
Grade and 89% Increase in Indicated Resources to 24
Million Ounces with
a Further 12 Million Ounces Inferred
Waterberg Pre-Feasibility Study Continues for a Decline
Tunnel Access and a Fully Mechanized Mine Plan
(Vancouver/Johannesburg) Platinum Group Metals Ltd. (PTM-TSX; PLG-NYSE MKT) (Platinum Group or the Company) reports increased grade and a significant increase in indicated ounces in an updated independent resource estimate for platinum, palladium, rhodium and gold (4E) on the 58.65% owned Waterberg Joint Venture, located on the North Limb of the Bushveld Complex.
Mineral resources in the T and F zones at Waterberg (100% project basis) have increased to an estimated 23.894 million ounces 4E in the indicated category plus 11.710 million ounces 4E in the inferred category:
|
Indicated 209.559 million tonnes grading 3.55 g/t 4E (1.07 g/t Pt, 2.19 g/t Pd, 0.26 g/t Au, 0.03 g/t Rh, 2.5 g/t cut-off) | |
|
Inferred 105.918 million tonnes grading 3.44 g/t 4E (1.04 g/t Pt, 2.09 g/t Pd, 0.28 g/t Au, 0.03 g/t Rh, 2.5 g/t cut-off) |
R. Michael Jones, P.Eng., President, CEO and co-founder of Platinum Group Metals said We have been very successful in almost doubling indicated resources to 24 million ounces. Waterberg is an extraordinary deposit that we have not yet found the limits to. Starting at 140 meters from surface, with zones 3 to 70 meters thick and an overall proven strike length of 13 km so far, Waterberg stands apart from conventional platinum mines in South Africa. The increased F zone grade combined with improved deposit definition allows for the targeting of best grade thickness in early mine scheduling, which is changing the project significantly from our earlier engineering work. We are looking at a series of adjacent mine plans, each at the scale of a typical stand-alone mine, to be prioritized and processed at a single central plant.
The resource estimate includes sampling and data from 294 diamond drill boreholes with 459 deflections for a total of 584 intersections into the deposit from a total of approximately 293,538 meters of core drilling. The deposit model is a kriged estimate from Data Mine geological wireframes.
PLATINUM GROUP METALS LTD. | 2 |
The deposit is 13 km long, open along strike and begins from 140 meters deep. The deposit is known to continue down dip below the arbitrary 1,250 meter cut off depth applied to the deposit for resource estimation purposes. Minimum mineralized thickness is 3 meters and the maximum is 70 meters. Drilling is continuing at Waterberg and the deposit is still open for expansion. Assays for shallow Super F zones at 180 meters to 300 meters from surface are outstanding. Deeper Super T targets are being drilled now. The most recent intercept in the Super T zone is 7.76 meters grading 6.14 g/t 4E and the deposit in the area of this hole is open for expansion.
Pre-Feasibility Update
The Pre-Feasibility Study is on track with this resource update to be completed at the end of July 2016. The engineering work is being completed by project teams from Worley Parsons (Advisian) and DRA. Both firms are experienced global, independent, mining engineering firms. Optimization of mine plans in five target zones (3 on the Super F zone and 2 on the T and Super T zones) is underway. Metallurgical test work and concentrate marketing discussions are in progress. Indications from metallurgical test work are that a good grade concentrate with similar base metals content to desirable Merensky concentrate, with no penalty chrome, can be produced. Site infrastructure work for power and water designs and costing are also well advanced.
JOGMEC Agreement and Funding
Drilling and engineering work is being funded 100% at this time by the Japan Oil, Gas and Metals National Corporation (JOGMEC) under a US$ 20 million firm commitment to the Joint Venture. A budget for US$ 6 million for April 1, 2016 to March 31, 2017 set out under the JOGMEC agreement commitment is in progress. The Company may accelerate expenditure levels at Waterberg if it has sufficient working capital on hand to do so. JOGMEC continues to be an excellent active technical partner with its geological and metallurgical in house expertise.
Mineral Resource Details
F Zone | ||||||||
Cut-off | Tonnage | Grade | Metal | |||||
3PGE+Au | Pt | Pd | Au | Rh | 3PGE
+Au |
3PGE +Au | ||
g/t | Mt | g/t | g/t | g/t | g/t | g/t | Kg | Moz |
Indicated | ||||||||
2.00 | 281.184 | 0.91 | 1.94 | 0.15 | 0.03 | 3.03 | 851 988 | 27.392 |
2.50 | 179.325 | 1.05 | 2.23 | 0.18 | 0.03 | 3.49 | 625 844 | 20.121 |
3.00 | 110.863 | 1.19 | 2.52 | 0.20 | 0.04 | 3.95 | 437 909 | 14.079 |
Inferred | ||||||||
2.00 | 177.961 | 0.83 | 1.77 | 0.13 | 0.03 | 2.76 | 491 183 | 15.792 |
2.50 | 84.722 | 1.01 | 2.14 | 0.17 | 0.03 | 3.35 | 283 819 | 9.125 |
3.00 | 43.153 | 1.19 | 2.53 | 0.20 | 0.04 | 3.96 | 170 886 | 5.494 |
PLATINUM GROUP METALS LTD. | 3 |
T Zone | ||||||||
Cut-off | Tonnage | Grade | Metal | |||||
2PGE+Au | Pt | Pd | Au | Rh | 2PGE
+Au |
2PGE +Au | ||
g/t | Mt | g/t | g/t | g/t | g/t | g/t | Kg | Moz |
Indicated | ||||||||
2.00 | 36.308 | 1.08 | 1.81 | 0.72 | - | 3.61 | 131 162 | 4.217 |
2.50 | 30.234 | 1.16 | 1.94 | 0.78 | - | 3.88 | 117 363 | 3.773 |
3.00 | 22.330 | 1.28 | 2.14 | 0.86 | - | 4.28 | 95 640 | 3.075 |
Inferred | ||||||||
2.00 | 23.314 | 1.10 | 1.83 | 0.73 | - | 3.66 | 85 240 | 2.741 |
2.50 | 21.196 | 1.14 | 1.90 | 0.76 | - | 3.79 | 80 394 | 2.585 |
3.00 | 14.497 | 1.28 | 2.14 | 0.86 | - | 4.28 | 62082 | 1.996 |
Waterberg Total | ||||||||
Cut-off | Tonnage | Grade | Metal | |||||
3PGE+Au | Pt | Pd | Au | Rh | 3PGE
+Au |
3PGE +Au | ||
g/t | Mt | g/t | g/t | g/t | g/t | g/t | Kg | Moz |
Indicated | ||||||||
2.00 | 317.492 | 0.93 | 1.92 | 0.22 | 0.03 | 3.10 | 983 150 | 31.609 |
2.50 | 209.559 | 1.07 | 2.19 | 0.26 | 0.03 | 3.55 | 743 207 | 23.894 |
3.00 | 133.193 | 1.21 | 2.46 | 0.31 | 0.03 | 4.01 | 533 549 | 17.154 |
Inferred | ||||||||
2.00 | 201.275 | 0.85 | 1.77 | 0.21 | 0.03 | 2.86 | 576 423 | 18.533 |
2.50 | 105.918 | 1.04 | 2.09 | 0.28 | 0.03 | 3.44 | 364 213 | 11.710 |
3.00 | 57.650 | 1.21 | 2.43 | 0.37 | 0.03 | 4.04 | 232 968 | 7.490 |
1. Mineral resources are classified in accordance with the SAMREC standards. There are certain differences with the "CIM Standards on Mineral Resources and Reserves"; however, in this case the Company and the QP believe the differences are not material and the standards may be considered the same. Mineral resources do not have demonstrated economic viability and inferred resources have a high degree of uncertainty. Mineral resources might never be upgraded or converted to reserves.
2. Mineral resources are provided on a 100% project basis. Inferred and indicated categories are separate. The estimates have an effective date of April 18th 2016. Tables may not add perfectly due to rounding.
PLATINUM GROUP METALS LTD. | 4 |
3. A cut-off grade of 2.5 g/t 3E (platinum, palladium and gold) for the T zone and 2.5 g/t 4E for the F zone is applied to the selected base case mineral resources. Prior to July 20, 2015, a 2 g/t cut-off was applied to resource estimates. For comparison with earlier resources a 2 g/t cut-off on the updated resource model is presented above. Cut-off grades of 3.0 g/t 4E are also presented as certain mining plans in early years may apply higher cut-offs for the Pre-Feasibility Study.
4. Cut off for the T and the F zones considered costs, smelter discounts, concentrator recoveries from the previous and ongoing engineering work completed on the property by the Company and its independent engineers. Spot and three year trailing average prices and exchange rates are considered for the cut-off considerations. Metallurgical work indicates that an economically attractive concentrate can be produced from standard flotation methods.
5. Mineral resources were completed by Charles Muller of CJM Consulting and a NI 43-101 technical report for the mineral resources reported herein, effective April 18, 2016, will be filed on SEDAR within 45 days of todays date.
6. Mineral resources were estimated using Kriging methods for geological domains created in Datamine Studio3 from 262 mother holes and 322 deflections in mineralization. A process of geological modelling and creation of grade shells using indicating kriging was completed in the estimation process.
7. The estimation of mineral resources have taken into account environmental, permitting, legal, title, taxation, socio-economic, marketing and political factors. The mineral resources may be materially affected by metals prices, exchange rates, labour costs, electricity supply issues or many other factors detailed in the Company's Annual Information Form.
8. The following prices based on an approximate recent 3 year trailing average in accordance with U.S. Securities and Exchange Commission ("SEC") guidance was used for the assessment of Resources; USD Pt 1,243/oz, Pd 720/oz, Au 1,238/oz, Rh 1,015/oz see Cautionary Note
9. Estimated grades and quantities for by-products will be included in recoverable metals and estimates in the on-going pre-feasibility work. Copper and Nickel are the main value by-products recoverable by flotation and for indicated resources are estimated at 0.18% copper and 0.10% nickel in the T zone 0.07% copper and 0.16% nickel in the F zone.
CIM guideline on resource classification:
An Inferred Mineral Resource is that part of a mineral resource for which quantity and grade or quality are estimated on the basis of limited geological evidence and sampling. Geological evidence is sufficient to imply but not verify geological and grade or quality continuity.
An Inferred Mineral Resource has a lower level of confidence than that applying to an Indicated Mineral Resource and must not be converted to a Mineral Reserve. It is reasonably expected that the majority of Inferred Mineral Resources could be upgraded to Indicated Mineral Resources with continued exploration.
PLATINUM GROUP METALS LTD. | 5 |
An Indicated Mineral Resource is that part of a mineral resource for which quantity, grade or quality, densities, shape and physical characteristics are estimated with sufficient confidence to allow the application of Modifying Factors in sufficient detail to support mine planning and evaluation of the economic viability of the deposit.
Geological evidence is derived from adequately detailed and reliable exploration, sampling and testing and is sufficient to assume geological and grade or quality continuity between points of observation.
An Indicated Mineral Resource has a lower level of confidence than that applying to a Measured Resource.
Qualified Person Data Verification and Quality Control and Assurance
Scientific and Technical Information in this Press Release related to mineral resources has been reviewed and approved by Charles J Muller, (BScHons) Pr Sci Nat (Reg. No 400201/04), an independent consulting geologist and resource estimator of CJM Consulting, an independent qualified person as defined in National Instrument 43-101 - Standards of Disclosure for Mineral Projects ("N1 43-101"). He has verified the data by reviewing the detailed assay and geological information and metallurgical work on the Waterberg deposit and he visited the property in July 2015. He is satisfied that the data is appropriate for the resource estimate by reviewing the core, assay certificates and quality control information as well as reviewing the procedures on sampling, chain of custody and data base records of the Platinum Group exploration team.
Base metals and other major elements were determined by multi acid digestion with Inductively Coupled Plasma ("ICP") finish and PGEs were determined by conventional fire assay and ICP finish. Setpoint Laboratories is an experienced ISO 17025 SANAS accredited laboratory in assaying and have utilized a standard quality control system including the use of standards. Platinum Group utilized a well-documented system of inserting blanks and standards into the assay stream and has a strict chain of custody and independent lab re-check system for quality control.
This press release has been reviewed and approved by R. Michael Jones, P.Eng., a non-independent Qualified Person and the CEO of the Company.
A report with respect to the technical information contained here is planned to be filed on www.sedar.com within 45 days.
On behalf of the Board of
Platinum Group Metals
Ltd.
R. Michael Jones, CEO and Co-founder
For further information contact: | |
R. Michael Jones, President & CEO | |
or Kris Begic, VP, Corporate Development | |
Platinum Group Metals Ltd., Vancouver | |
Tel: (604) 899-5450 / Toll Free: (866) 899-5450 | |
www.platinumgroupmetals.net |
PLATINUM GROUP METALS LTD. | 6 |
Disclosure
The Toronto Stock Exchange and the NYSE
MKT LLC have not reviewed and do not accept responsibility for the accuracy or
adequacy of this news release, which has been prepared by management.
Forward-Looking Statements
This press release
contains forward-looking information within the meaning of Canadian securities
laws and forward-looking statements within the meaning of U.S. securities laws
("forward-looking statements"). Forward-looking statements are typically
identified by words such as: believe, expect, anticipate, intend, estimate,
plans, postulate and similar expressions, or are those, which, by their nature,
refer to future events. All statements that are not statements of historical
fact are forward-looking statements. Forward-looking statements in this press
release include, without limitation, statements regarding all technical details
of the updated mineral resources. A shortage of working capital may materially
affect the Company ability to complete its plans. Although the Company believes
the forward-looking statements in this press release are reasonable, it can give
no assurance that the expectations and assumptions in such statements will prove
to be correct. The Company cautions investors that any forward-looking
statements by the Company are not guarantees of future results or performance,
and that actual results may differ materially from those in forward looking
statements as a result of various factors, including, but not limited to,
variations in market conditions; the nature, quality and quantity of any mineral
deposits that may be located; metal prices; other prices and costs; currency
exchange rates; the Company's ability to obtain any necessary permits, consents
or authorizations required for its activities; the Company's ability to access
further funding and produce minerals from its properties successfully or
profitably, to continue its projected growth, or to be fully able to implement
its business strategies and other risk factors described in the Company's Form
40-F annual report, annual information form and other filings with the SEC and
Canadian securities regulators, which may be viewed at
www.sec.gov and www.sedar.com,
respectively.
PLATINUM GROUP METALS LTD. | 7 |
Cautionary Note to U.S. and other
Investors
Estimates of mineralization and other technical information
included or referenced in this press release have been prepared in accordance
with NI 43-101. The definitions of proven and probable reserves used in NI
43-101 differ from the definitions in SEC Industry Guide 7. Under SEC Industry
Guide 7 standards, a "final" or "bankable" feasibility study is required to
report reserves, the three-year historical average price is used in any reserve
or cash flow analysis to designate reserves and the primary environmental
analysis or report must be filed with the appropriate governmental authority. As
a result, the reserves reported by the Company in accordance with NI 43-101 may
not qualify as "reserves" under SEC standards. In addition, the terms "mineral
resource", "measured mineral resource", "indicated mineral resource" and
"inferred mineral resource" are defined in and required to be disclosed by NI
43-101; however, these terms are not defined terms under SEC Industry Guide 7
and normally are not permitted to be used in reports and registration statements
filed with the SEC. Mineral resources that are not mineral reserves do not have
demonstrated economic viability. Investors are cautioned not to assume that any
part or all of the mineral deposits in these categories will ever be converted
into reserves. "inferred mineral resources" have a great amount of uncertainty
as to their existence, and great uncertainty as to their economic and legal
feasibility. It cannot be assumed that all or any part of an inferred mineral
resource will ever be upgraded to a higher category. Under Canadian securities
laws, estimates of inferred mineral resources may not form the basis of
feasibility or pre-feasibility studies, except in rare cases. Additionally,
disclosure of "contained ounces" in a resource is permitted disclosure under
Canadian securities laws; however, the SEC normally only permits issuers to
report mineralization that does not constitute "reserves" by SEC standards as in place tonnage and grade without reference to
unit measurements. Accordingly, information contained or referenced in this
press release containing descriptions of the Company's mineral deposits may not
be comparable to similar information made public by U.S. companies subject to
the reporting and disclosure requirements of United States federal securities
laws and the rules and regulations thereunder
FORM 51-102F3 |
MATERIAL CHANGE REPORT |
ITEM 1. | NAME AND ADDRESS OF COMPANY |
PLATINUM GROUP METALS LTD. (the
Company or Platinum Group)
788 550 Burrard Street Vancouver BC, V6C
2B5
Telephone: (604)
899-5450 Facsimile:
(604) 484-4710
ITEM 2. |
DATE OF MATERIAL CHANGE |
| |
April 19, 2016 | |
| |
ITEM 3. |
NEWS RELEASE |
| |
A news release was disseminated on April 19, 2016 to the TSX as well as through various other approved public media and was SEDAR filed with the British Columbia, Alberta, Saskatchewan, Manitoba, Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island and Newfoundland Securities Commissions. | |
| |
ITEM 4. |
SUMMARY OF MATERIAL CHANGE |
| |
(Vancouver, British Columbia) Platinum Group Metals Ltd. (PTM-TSX; PLG-NYSE MKT) (Platinum Group or the Company) reports increased grade and a significant increase in indicated ounces in an updated independent resource estimate for platinum, palladium, rhodium and gold (4E) on the 58.65% owned Waterberg Joint Venture, located on the North Limb of the Bushveld Complex. | |
| |
ITEM |
FULL DESCRIPTION OF MATERIAL CHANGE |
| |
(Vancouver, British Columbia) Platinum Group Metals Ltd. (PTM-TSX; PLG-NYSE MKT) (Platinum Group or the Company) reports increased grade and a significant increase in indicated ounces in an updated independent resource estimate for platinum, palladium, rhodium and gold (4E) on the 58.65% owned Waterberg Joint Venture, located on the North Limb of the Bushveld Complex. | |
| |
Mineral resources in the T and F zones at Waterberg (100% project basis) have increased to an estimated 23.894 million ounces 4E in the indicated category plus 11.710 million ounces 4E in the inferred category: | |
| |
Indicated 209.559 million tonnes grading 3.55 g/t 4E (1.07 g/t Pt, 2.19 g/t Pd, 0.26 g/t Au, 0.03 g/t Rh, 2.5 g/t cut-off) | |
| |
Inferred 105.918 million tonnes grading 3.44 g/t 4E (1.04 g/t Pt, 2.09 g/t Pd, 0.28 g/t Au, 0.03 g/t Rh, 2.5 g/t cut-off) | |
| |
R. Michael Jones, P.Eng., President, CEO and co-founder of Platinum Group Metals said We have been very successful in almost doubling indicated resources to 24 million ounces. Waterberg is an extraordinary deposit that we have not yet found the limits to. Starting at 140 meters from surface, with zones 3 to 70 meters thick and an overall proven strike length of 13 km so far, Waterberg stands apart from conventional platinum mines in South Africa. The increased F zone grade combined with improved deposit definition allows for the targeting of best grade thickness in early mine scheduling, which is changing the project significantly from our earlier engineering work. We are looking at a series of adjacent mine plans, each at the scale of a typical stand-alone mine, to be prioritized and processed at a single central plant. |
The resource estimate includes sampling and data from 294 diamond drill boreholes with 459 deflections for a total of 584 intersections into the deposit from a total of approximately 293,538 meters of core drilling. The deposit model is a kriged estimate from Data Mine geological wireframes.
The deposit is 13 km long, open along strike and begins from 140 meters deep. The deposit is known to continue down dip below the arbitrary 1,250 meter cut off depth applied to the deposit for resource estimation purposes. Minimum mineralized thickness is 3 meters and the maximum is 70 meters. Drilling is continuing at Waterberg and the deposit is still open for expansion. Assays for shallow Super F zones at 180 meters to 300 meters from surface are outstanding. Deeper Super T targets are being drilled now. The most recent intercept in the Super T zone is 7.76 meters grading 6.14 g/t 4E and the deposit in the area of this hole is open for expansion.
Pre-Feasibility Update
The Pre-Feasibility Study is on track with this resource update to be completed at the end of July 2016. The engineering work is being completed by project teams from Worley Parsons (Advisian) and DRA. Both firms are experienced global, independent, mining engineering firms. Optimization of mine plans in five target zones (3 on the Super F zone and 2 on the T and Super T zones) is underway. Metallurgical test work and concentrate marketing discussions are in progress. Indications from metallurgical test work are that a good grade concentrate with similar base metals content to desirable Merensky concentrate, with no penalty chrome, can be produced. Site infrastructure work for power and water designs and costing are also well advanced.
JOGMEC Agreement and Funding
Drilling and engineering work is being funded 100% at this time by the Japan Oil,
Gas and Metals National Corporation (JOGMEC) under a US$ 20 million firm commitment to the Joint Venture. A budget for US$ 6 million for April 1, 2016 to March 31, 2017 set out under the JOGMEC agreement commitment is in progress. The Company may accelerate expenditure levels at Waterberg if it has sufficient working capital on hand to do so. JOGMEC continues to be an excellent active technical partner with its geological and metallurgical in house expertise.
Mineral Resource Details
F Zone | ||||||||
Cut-off | Tonnage | Grade | Metal | |||||
3PGE+Au | Pt | Pd | Au | Rh | 3PGE+
Au |
3PGE +Au | ||
g/t | Mt | g/t | g/t | g/t | g/t | g/t | Kg | Moz |
Indicated | ||||||||
2.00 | 281.184 | 0.91 | 1.94 | 0.15 | 0.03 | 3.03 | 851 988 | 27.392 |
2.50 | 179.325 | 1.05 | 2.23 | 0.18 | 0.03 | 3.49 | 625 844 | 20.121 |
3.00 | 110.863 | 1.19 | 2.52 | 0.20 | 0.04 | 3.95 | 437 909 | 14.079 |
Inferred | ||||||||
2.00 | 177.961 | 0.83 | 1.77 | 0.13 | 0.03 | 2.76 | 491 183 | 15.792 |
2.50 | 84.722 | 1.01 | 2.14 | 0.17 | 0.03 | 3.35 | 283 819 | 9.125 |
3.00 | 43.153 | 1.19 | 2.53 | 0.20 | 0.04 | 3.96 | 170 886 | 5.494 |
T Zone | ||||||||
Cut-off | Tonnage | Grade | Metal | |||||
2PGE+Au | Pt | Pd | Au | Rh | 2PGE+
Au |
2PGE +Au | ||
g/t | Mt | g/t | g/t | g/t | g/t | g/t | Kg | Moz |
Indicated | ||||||||
2.00 | 36.308 | 1.08 | 1.81 | 0.72 | - | 3.61 | 131 162 | 4.217 |
2.50 | 30.234 | 1.16 | 1.94 | 0.78 | - | 3.88 | 117 363 | 3.773 |
3.00 | 22.330 | 1.28 | 2.14 | 0.86 | - | 4.28 | 95 640 | 3.075 |
Inferred | ||||||||
2.00 | 23.314 | 1.10 | 1.83 | 0.73 | - | 3.66 | 85 240 | 2.741 |
2.50 | 21.196 | 1.14 | 1.90 | 0.76 | - | 3.79 | 80 394 | 2.585 |
3.00 | 14.497 | 1.28 | 2.14 | 0.86 | - | 4.28 | 62082 | 1.996 |
Waterberg Total | ||||||||
Cut-off | Tonnage | Grade | Metal | |||||
3PGE+Au | Pt | Pd | Au | Rh | 3PGE+
Au |
3PGE +Au | ||
g/t | Mt | g/t | g/t | g/t | g/t | g/t | Kg | Moz |
Indicated | ||||||||
2.00 | 317.492 | 0.93 | 1.92 | 0.22 | 0.03 | 3.10 | 983 150 | 31.609 |
2.50 | 209.559 | 1.07 | 2.19 | 0.26 | 0.03 | 3.55 | 743 207 | 23.894 |
3.00 | 133.193 | 1.21 | 2.46 | 0.31 | 0.03 | 4.01 | 533 549 | 17.154 |
Inferred | ||||||||
2.00 | 201.275 | 0.85 | 1.77 | 0.21 | 0.03 | 2.86 | 576 423 | 18.533 |
2.50 | 105.918 | 1.04 | 2.09 | 0.28 | 0.03 | 3.44 | 364 213 | 11.710 |
3.00 | 57.650 | 1.21 | 2.43 | 0.37 | 0.03 | 4.04 | 232 968 | 7.490 |
1. Mineral resources are classified in accordance with the SAMREC standards. There are certain differences with the "CIM Standards on Mineral Resources and Reserves"; however, in this case the Company and the QP believe the differences are not material and the standards may be considered the same. Mineral resources do not have demonstrated economic viability and inferred resources have a high degree of uncertainty. Mineral resources might never be upgraded or converted to reserves.
2. Mineral resources are provided on a 100% project basis. Inferred and indicated categories are separate. The estimates have an effective date of April 18th 2016. Tables may not add perfectly due to rounding.
3. A cut-off grade of 2.5 g/t 3E (platinum, palladium and gold) for the T zone and 2.5 g/t 4E for the F zone is applied to the selected base case mineral resources. Prior to July 20, 2015, a 2 g/t cut-off was applied to resource estimates. For comparison with earlier resources a 2 g/t cut-off on the updated resource model is presented above. Cut-off grades of 3.0 g/t 4E are also presented as certain mining plans in early years may apply higher cut-offs for the Pre-Feasibility Study.
4. Cut off for the T and the F zones considered costs, smelter discounts, concentrator recoveries from the previous and ongoing engineering work completed on the property by the Company and its independent engineers. Spot and three year trailing average prices and exchange rates are considered for the cut-off considerations. Metallurgical work indicates that an economically attractive concentrate can be produced from standard flotation methods.
5. Mineral resources were completed by Charles Muller of CJM Consulting and a NI 43-101 technical report for the mineral resources reported herein, effective April 18, 2016, will be filed on SEDAR within 45 days of todays date.
6. Mineral resources were estimated using Kriging methods for geological domains created in Datamine Studio3 from 262 mother holes and 322 deflections in mineralization. A process of geological modelling and creation of grade shells using indicating kriging was completed in the estimation process.
7. The estimation of mineral resources have taken into account environmental, permitting, legal, title, taxation, socio-economic, marketing and political factors. The mineral resources may be materially affected by metals prices, exchange rates, labour costs, electricity supply issues or many other factors detailed in the Company's Annual Information Form.
8. The following prices based on an approximate recent 3 year trailing average in accordance with U.S. Securities and Exchange Commission ("SEC") guidance was used for the assessment of Resources; USD Pt 1,243/oz, Pd 720/oz, Au 1,238/oz, Rh 1,015/oz see Cautionary Note 9. Estimated grades and quantities for by-products will be included in recoverable metals and estimates in the on-going pre-feasibility work. Copper and Nickel are the main value by-products recoverable by flotation and for indicated resources are estimated at 0.18% copper and 0.10% nickel in the T zone 0.07% copper and 0.16% nickel in the F zone.
CIM guideline on resource classification:
An Inferred Mineral Resource is that part of a mineral resource for which quantity and grade or quality are estimated on the basis of limited geological evidence and sampling. Geological evidence is sufficient to imply but not verify geological and grade or quality continuity.
An Inferred Mineral Resource has a lower level of confidence than that applying to an Indicated Mineral Resource and must not be converted to a Mineral Reserve. It is reasonably expected that the majority of Inferred Mineral Resources could be upgraded to Indicated Mineral Resources with continued exploration.
An Indicated Mineral Resource is that part of a mineral resource for which quantity, grade or quality, densities, shape and physical characteristics are estimated with sufficient confidence to allow the application of Modifying Factors in sufficient detail to support mine planning and evaluation of the economic viability of the deposit.
Geological evidence is derived from adequately detailed and reliable exploration, sampling and testing and is sufficient to assume geological and grade or quality continuity between points of observation.
An Indicated Mineral Resource has a lower level of confidence than that applying to a Measured Resource.
Qualified Person Data Verification and Quality Control and Assurance
Scientific and Technical Information in this Press Release related to mineral resources has been reviewed and approved by Charles J Muller, (BScHons) Pr Sci Nat (Reg. No 400201/04), an independent consulting geologist and resource estimator of CJM Consulting, an independent qualified person as defined in National Instrument 43-101 - Standards of Disclosure for Mineral Projects ("N1 43-101"). He has verified the data by reviewing the detailed assay and geological information and metallurgical work on the Waterberg deposit and he visited the property in July 2015. He is satisfied that the data is appropriate for the resource estimate by reviewing the core, assay certificates and quality control information as well as reviewing the procedures on sampling, chain of custody and data base records of the Platinum Group exploration team.
Base metals and other major elements were determined by multi acid digestion with Inductively Coupled Plasma ("ICP") finish and PGEs were determined by conventional fire assay and ICP finish. Setpoint Laboratories is an experienced ISO 17025 SANAS accredited laboratory in assaying and have utilized a standard quality control system including the use of standards. Platinum Group utilized a well-documented system of inserting blanks and standards into the assay stream and has a strict chain of custody and independent lab re-check system for quality control.
This press release has been reviewed and approved by R. Michael Jones, P.Eng., a non-independent Qualified Person and the CEO of the Company.
A report with respect to the technical information contained here is planned to be filed on www.sedar.com within 45 days.
On behalf of the Board of Platinum Group Metals Ltd.
R. Michael Jones, CEO and Co-founder
For further information contact:
R. Michael Jones, President & CEO
or Kris Begic, VP, Corporate Development
Platinum Group Metals Ltd.,
Vancouver
Tel: (604) 899-5450 / Toll Free: (866) 899-5450
www.platinumgroupmetals.net
Disclosure
The Toronto
Stock Exchange and the NYSE MKT LLC have not reviewed and do not accept
responsibility for the accuracy or adequacy of this news release, which has been
prepared by management.
Forward-Looking
Statements
This press release contains forward-looking information
within the meaning of Canadian securities laws and forward-looking statements
within the meaning of U.S. securities laws ("forward-looking statements").
Forward-looking statements are typically identified by words such as: believe,
expect, anticipate, intend, estimate, plans, postulate and similar expressions,
or are those, which, by their nature, refer to future events. All statements
that are not statements of historical fact are forward-looking statements.
Forward-looking statements in this press release include, without limitation,
statements regarding all technical details of the updated mineral resources. A
shortage of working capital may materially affect the Company ability to
complete its plans. Although the Company believes the forward-looking statements
in this press release are reasonable, it can give no assurance that the
expectations and assumptions in such statements will prove to be correct. The
Company cautions investors that any forward-looking statements by the Company
are not guarantees of future results or performance, and that actual results may
differ materially from those in forward looking statements as a result of
various factors, including, but not limited to, variations in market conditions;
the nature, quality and quantity of any mineral deposits that may be located;
metal prices; other prices and costs; currency exchange rates; the Company's
ability to obtain any necessary permits, consents or authorizations required for
its activities; the Company's ability to access further funding and produce
minerals from its properties successfully or profitably, to continue its
projected growth, or to be fully able to implement its business strategies and
other risk factors described in the Company's Form 40-F annual report, annual
information form and other filings with the SEC and Canadian securities
regulators, which may be viewed at www.sec.gov and www.sedar.com, respectively.
Cautionary Note to U.S. and other
Investors
Estimates of mineralization and other technical information
included or referenced in this press release have been prepared in accordance
with NI 43-101. The definitions of proven and probable reserves used in NI
43-101 differ from the definitions in SEC Industry Guide 7. Under SEC Industry
Guide 7 standards, a "final" or "bankable" feasibility study is required to
report reserves, the three-year historical average price is used in any reserve
or cash flow analysis to designate reserves and the primary environmental
analysis or report must be filed with the appropriate governmental authority. As
a result, the reserves reported by the Company in accordance with NI 43-101 may
not qualify as "reserves" under SEC standards. In addition, the terms "mineral
resource", "measured mineral resource", "indicated mineral resource" and
"inferred mineral resource" are defined in and required to be disclosed by NI
43-101; however, these terms are not defined terms under SEC Industry Guide 7
and normally are not permitted to be used in reports and registration statements
filed with the SEC. Mineral resources that are not mineral reserves do not have
demonstrated economic viability. Investors are cautioned not to assume that any
part or all of the mineral deposits in these categories will ever be converted
into reserves. "inferred mineral resources" have a great amount of uncertainty
as to their existence, and great uncertainty as to their economic and legal
feasibility. It cannot be assumed that all or any part of an inferred mineral
resource will ever be upgraded to a higher category. Under Canadian securities
laws, estimates of inferred mineral resources may not form the basis of
feasibility or pre-feasibility studies, except in rare cases. Additionally,
disclosure of "contained ounces" in a resource is permitted disclosure under
Canadian securities laws; however, the SEC normally only permits issuers to
report mineralization that does not constitute "reserves" by SEC standards as in
place tonnage and grade without reference to unit measurements. Accordingly,
information contained or referenced in this press release containing
descriptions of the Company's mineral deposits may not be comparable to similar
information made public by U.S. companies subject to the reporting and
disclosure requirements of United States federal securities laws and the rules
and regulations thereunder.
ITEM 6. | RELIANCE ON SUBSECTION 7.1 OF NATIONAL INSTRUMENT 51-102 |
N/A | |
ITEM 7. | OMITTED INFORMATION |
N/A |
ITEM 8. | EXECUTIVE OFFICER |
The following senior officer of the Issuer is knowledgeable about the material change and may be contacted by the Commission at the following telephone number: | |
R. Michael Jones, President & CEO Phone: (604) 899-5450 | |
ITEM 9. | DATE OF REPORT |
April 19, 2016 |