8-K

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

FORM 8-K

CURRENT REPORT
Pursuant to Section 13 or 15(d)
of the Securities Exchange Act of 1934

Date of Report (Date of earliest event reported): July 18, 2023 (July 14, 2023)

TERAWULF INC.
(Exact name of registrant as specified in its charter)

Delaware	001-41163	87-1909475
(State or other jurisdiction of incorporation)	(Commission File Number)	(IRS Employer Identification No.)

9 Federal Street

Easton, Maryland 21601

(Address of principal executive offices) (Zip Code)

(410) 770-9500

(Registrant’s telephone number, including area code)

Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions (see General Instruction A.2. below):

☐Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425)

☐Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12)

☐Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b))

☐Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c))

Securities registered pursuant to Section 12(b) of the Act:

Title of each class	Trading Symbol(s)	Name of each exchange on which registered
Common stock, $0.001 par value per share	WULF	The Nasdaq Stock Market LLC

Indicate by check mark whether the registrant is an emerging growth company as defined in Rule 405 of the Securities Act of 1933 (§230.405 of this chapter) or Rule 12b-2 of the Securities Exchange Act of 1934 (§240.12b-2 of this chapter). 

Emerging growth company ☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Item 1.01.       Entry into a Material Definitive Agreement.

On July 14, 2023, TeraLease LLC (“TeraLease”), a subsidiary of TeraWulf Inc. (the “Company”) entered into a future sales and purchase agreement (the “Agreement”) with Bitmain Technologies Delaware Limited (“Bitmain”). The Agreement provides that TeraLease will receive 15,138 S19j XP miners from Bitmain, with an option to receive an additional 3,362 miners if the Company meets its payment obligations under the Agreement, for delivery in Q4 2023 for a total purchase price of $75.4 million, 30% of which the Company is entitled to apply paid-for coupons, resulting in an effective purchase price of $53.4 million for 18,500 miners. The Company plans to use the new miners to expand mining capacity at its Lake Mariner facility.

The description of the terms of the Agreement is qualified in its entirety by reference to the full and complete terms of the Agreement which is attached hereto as Exhibit 10.1 and is incorporated herein by reference.

Item 7.01.       Regulation FD Disclosure.

On July 18, 2023, the Company issued a press release (“Press Release”) announcing an update to its productions and operations. The Press Release is attached hereto as Exhibit 99.1 and is incorporated herein by reference.

The information contained in this Item 7.01 as well as in Exhibit 99.1 is furnished and shall not be deemed to be “filed” for purposes of Section 18 of the Securities and Exchange Act of 1934, as amended (the “Exchange Act”), or otherwise subject to the liabilities of that section, and such information shall not be deemed to be incorporated by reference into any of the Company’s filings under the Securities Act of 1933, as amended or the Exchange Act.

Item 9.01.       Financial Statements and Exhibits.

(d) Exhibits.

Exhibit No.	Description
10.1	Future Sales and Purchase Agreement, dated as of July 14, 2023, by and between Bitmain Technologies Delaware Limited and TeraLease LLC.
99.1	Press Release, dated July 18, 2023.
104.1	Cover Page Interactive Data File (embedded within the inline XBRL document).

Forward Looking Statements

This Current Report on Form 8-K contains forward-looking statements within the meaning of the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995, as amended. Such forward-looking statements include statements concerning anticipated future events and expectations that are not historical facts. All statements, other than statements of historical fact, are statements that could be deemed forward-looking statements. In addition, forward-looking statements are typically identified by words such as “plan,” “believe,” “goal,” “target,” “aim,” “expect,” “anticipate,” “intend,” “outlook,” “estimate,” “forecast,” “project,” “continue,” “could,” “may,” “might,” “possible,” “potential,” “predict,” “should,” “would” and other similar words and expressions, although the absence of these words or expressions does not mean that a statement is not forward-looking. Forward-looking statements are based on the current expectations and beliefs of TeraWulf’s management and are inherently subject to a number of factors, risks, uncertainties and assumptions and their potential effects. There can be no assurance that future developments will be those that have been anticipated. Actual results may vary materially from those expressed or implied by forward-looking statements based on a number of factors, risks, uncertainties and assumptions, including, among others: (1) conditions in the cryptocurrency mining industry, including fluctuation in the market pricing of Bitcoin and other cryptocurrencies, and the economics of cryptocurrency mining, including as to variables or factors affecting the cost, efficiency and profitability of cryptocurrency mining; (2) competition among the various providers of cryptocurrency mining services; (3) changes in applicable laws, regulations and/or permits affecting TeraWulf’s operations or the industries in which it operates, including regulation regarding power generation, cryptocurrency usage and/or cryptocurrency mining; (4) the ability to implement certain business objectives and to timely and cost-effectively execute integrated projects; (5) failure to obtain adequate financing on a timely basis and/or on acceptable terms with regard to growth strategies or operations; (6) loss of public confidence in Bitcoin or other cryptocurrencies and the potential for cryptocurrency market manipulation; (7) the potential of cybercrime, money-laundering, malware

infections and phishing and/or loss and interference as a result of equipment malfunction or break-down, physical disaster, data security breach, computer malfunction or sabotage (and the costs associated with any of the foregoing); (8) the availability, delivery schedule and cost of equipment necessary to maintain and grow the business and operations of TeraWulf, including mining equipment and infrastructure equipment meeting the technical or other specifications required to achieve its growth strategy; (9) employment workforce factors, including the loss of key employees; (10) litigation relating to TeraWulf, RM 101 f/k/a IKONICS Corporation and/or the business combination; (11) the ability to recognize the anticipated objectives and benefits of the business combination; and (12) other risks and uncertainties detailed from time to time in the Company’s filings with the Securities and Exchange Commission (“SEC”). Potential investors, stockholders and other readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date on which they were made. TeraWulf does not assume any obligation to publicly update any forward-looking statement after it was made, whether as a result of new information, future events or otherwise, except as required by law or regulation. Investors are referred to the full discussion of risks and uncertainties associated with forward-looking statements and the discussion of risk factors contained in the Company’s filings with the SEC, which are available at www.sec.gov.

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, hereunto duly authorized.

TERAWULF INC.
By:	/s/ Patrick A. Fleury
Name:	Patrick A. Fleury
Title:	Chief Financial Officer

Dated: July 18, 2023

EX-10.1

Exhibit 10.1

V3.1.20221230(US) Pages 1 of 28 DATED 2023-07-14 FUTURE SALES AND PURCHASE AGREEMENT BETWEEN BITMAIN TECHNOLOGIES DELAWARE LIMITED (“BITMAIN”) and TeraLease LLC (“PURCHASER”) BM Ref: USDE-XS-00120230630001 Exhibit 10.1

V3.1.20221230(US) Pages 2 of 28 THIS AGREEMENT (the “Agreement”) is made on 2023-07-14. BETWEEN: (1) BITMAIN TECHNOLOGIES DELAWARE LIMITED, a company incorporated under the laws of the State of Delaware, the United States (File Number: 6096946)(“BITMAIN”), having its principal address at 840 New Burton Street, Suite 201, Dover, Kent, DE 19904; and (2) TeraLease LLC, a company incorporated under the laws of the State of United States the United States (File Number 92-1072608), having its principal address at 9 Federal Street Easton, MD 21601 (“Purchaser”). Each of the parties to this Agreement is referred herein individually as a “Party” and collectively as the “Parties”. WHEREAS: (A) Purchaser fully understands the market risks, the price-setting principles and the market fluctuations relating to the products of BITMAIN and is familiar with the purchase and ordering process of products of BITMAIN. (B) Purchaser agrees to purchase and BITMAIN agrees to supply the Products (as defined below) in accordance with the terms and conditions of this Agreement. NOW, THEREFORE, in consideration of the premises and the mutual covenants set forth in this Agreement, the parties agree as follows: 1. Definitions and Interpretations 1.1 The following terms, as used herein, have the following meanings: “Affiliate(s)” means, with respect to any Person, any other Person directly or indirectly Controlling, Controlled by, or under common Control with such Person. “Applicable Law(s)” means any treaty, law, decree, order, regulation, decision, statute, ordinance, rule, directive, code or other document that has legal force under any system of law, including, without limitation, local law, law of any other state or part thereof or international law, and which creates or purports to create any requirement or rule that may affect, restrict, prohibit or expressly allow the terms of this Agreement or any activity contemplated or carried out under this Agreement. “Business Day(s)” means a day (other than Saturday or Sunday) on which banking institutions in the Relevant Jurisdiction are open generally for normal banking business.

V3.1.20221230(US) Pages 3 of 28 “Contracted Hashrate” means the aggregation of the hashrate of all the Products as set forth in Appendix A. “Control” means, with respect to any Person, the power or authority, whether exercised or not, to direct the business, management and policies of such Person, directly or indirectly, whether through the ownership of voting securities, by contract or otherwise, provided that in the case of a Person that is an entity, such power or authority shall conclusively be presumed to exist upon possession of beneficial ownership or power to direct the vote of more than fifty percent (50%) of the votes entitled to be cast at a meeting of the holders of the shares or other equity interests or registered capital of such Person or power to control the composition of a majority of the board of directors or similar governing body of such Person. The terms “Controlled” and “Controlling” have meanings correlative to the foregoing. “Force Majeure” means in respect of either Party, any event or occurrence whatsoever beyond the reasonable control of that Party, non-foreseeable, or even if foreseen, was unavoidable and occurs after the date of this Agreement in or affecting the Relevant Jurisdictions. “Force Majeure Event(s)” include, without limitation, war (declared or undeclared), terrorist activities, acts of sabotage, blockade, fire, lightning, acts of God, national strikes, riots, insurrections, civil commotions, quarantine restrictions, epidemics, earthquakes, landslides, avalanches, floods, hurricanes, explosions, acts of government, and other instances which are accepted as a force majeure event in general international commercial practice. For the avoidance of doubt, any prohibition or restriction in relation to the production and/or sale of cryptocurrency mining hardware declared by any Governmental Authority (other than the local Governmental Authority with competent authority over BITMAIN) shall not constitute a Force Majeure Event. “Governmental Authority” means any government of any nation, federation, province, state or locality or any other political subdivision thereof, any entity, authority or body exercising executive, legislative, judicial, regulatory or administrative functions of or pertaining to government, including any government authority, agency, department, board, commission or instrumentality of any country, or any political subdivision thereof, any court, tribunal or arbitrator, and any self-regulatory organization. “Intellectual Property Rights” means any and all intellectual property rights, including but not limited to those concerning inventions, patents, utility models, registered designs and models, engineering or production materials, drawings, trademarks, service marks, domain names, applications for any of the foregoing (and the rights to apply for any of the foregoing), proprietary or business sensitive information and/or technical know-how, copyright, authorship, whether registered or not, and any neighbor rights.

V3.1.20221230(US) Pages 4 of 28 “Person” means any individual, corporation, partnership, limited partnership, proprietorship, association, limited liability company, firm, trust, estate or other enterprise or entity (whether or not having separate legal personality). “Purchase Unit Price” the per T unit price of the Products, as set forth in Appendix A. “Product(s)” means the cryptocurrency mining hardware and other equipment or merchandise that BITMAIN will sell to the Purchaser in accordance with this Agreement, details of which are set forth in Appendix A. “Quantity of the Products” means 15,138, being the quotient of the Contracted Hashrate divided by Rated Hashrate per Unit as set forth in Appendix A, which is for reference only and shall not be deemed as any representation, warranty or covenant made by BITMAIN. The Quantity of the Products shall be automatically adjusted in accordance with the change (if any) of the Rated Hashrate per Unit of the delivered Products. “Rated Hashrate per Unit” means the rated hashrate of each unit of the Products as set forth in Appendix A. “Relevant Jurisdiction” means the State of New York, the United States. “Shipping Period” means the estimated time period when BITMAIN shall ship the applicable batch of Products on condition that the Purchaser has fulfilled its payment obligations hereunder, as set forth in Appendix A. “Total Purchase Price” means $ 75,432,654.00, being the product of Purchase Unit Price multiplied by the Contracted Hashrate. “US$” or “US Dollars” means the lawful currency of the United States of America. “Warranty Period” means the period of time that the Products are covered by the warranty granted by BITMAIN or its Affiliates in accordance with Clause 6. “Warranty Start Date” means the date on which the Products are delivered to the carrier as recorded on BITMAIN Website. 1.2 In this Agreement, unless otherwise specified: (a) Any singular term in this Agreement shall be deemed to include the plural and vice versa where the context so requires

V3.1.20221230(US) Pages 5 of 28 (b) The headings in this Agreement are inserted for convenience only and shall not be taken into consideration in the interpretation or construction of this Agreement. (c) References to Clause(s) and Appendix(es) are references to Clause(s) and Appendix(es) of this Agreement. (d) The Appendixes form part of this Agreement and shall have the same force and effect as if expressly set out in the body of this Agreement. (e) Unless specifically stated otherwise, all references to days shall mean calendar days. (f) Any reference to a code, law, statute, statutory provision, statutory instrument, order, regulation or other instrument of similar effect shall include any re-enactment or amendment thereof for the time being in force. 2. Sales and Purchase of Products 2.1 Subject to the terms and conditions set forth herein, the Purchaser agrees to purchase the batches of Products at the Total Purchase Price. 3. Price and Terms of Payment 3.1. The Purchaser shall pay the Total Purchase Price of each batch of Products in tranches in accordance with the payment schedule as set forth in Appendix B. 3.2 All sums payable by the Purchaser to BITMAIN shall not be subject to any abatement, set-off, claim, counterclaim, adjustment, reduction, or defense for any reason. Unless otherwise explicitly specified herein, any and all payments made by the Purchaser (including, without limitation, the payment of the Total Purchase Price) are not refundable, but shall be held for credit on the Purchaser’s future purchases if unused. Without prejudice to the foregoing, the Parties acknowledge and agree that BITMAIN shall be entitled to deduct from, set-off and apply any and all deposits and balance of the Purchaser for any sums owed by the Purchaser to BITMAIN, including but not limited to any liquidated damages, indemnities, liabilities, etc. 3.3 In the event that the Purchaser fails to fully settle the respective percentage of the Total Purchase Price with respect to any applicable batch before the prescribed deadline(s) set forth in Appendix B without BITMAIN’s prior written consent, BITMAIN, at its sole discretion, shall be entitled to: (a) charge default interest on all unpaid amount with respect to each applicable batch, at the rate of twelve percent (12%) per annum; and (b) continue to perform its obligations with respect to such applicable batch, provided that, in each case, any and all the losses, claims, damages or liabilities that BITMAIN may suffer shall be fully indemnified by the Purchaser. 3.4 Before the Purchaser makes any payment on any batch of Product(s), the Parties shall confirm and agree on the batch of the Product(s) against which payment is being made. This confirmation shall be used to determine matters where different arrangements are applicable to different batches,

V3.1.20221230(US) Pages 6 of 28 including, but not limited to, defaults of the Purchaser and the product discount (if any) offered to the Purchaser. 3.5 The Purchaser shall complete the relevant order processing procedures on the official website of BITMAIN: https://shop.bitmain.com (the “BITMAIN Website”) in accordance with BITMAIN’s instructions. 3.6 The Parties understand and agree that the Total Purchase Price is inclusive of the insurance (as set forth in Clause 2 of the Appendix A) fee and applicable bank transaction fee, but is exclusive of the logistics costs of shipping from BTIMAIN’s factory to the designated place of the Purchaser, relevant maintenance or other applicable costs of the Purchaser to purchase the Products, and any and all applicable import duties, taxes (any value-added taxes, sales and use tax and other similar turnover tax) and governmental charges. 3.7 The Purchaser is responsible for being compliant with tax filing requirement regulated by any federal, state or local taxing authority in the United States regarding all applicable taxes, including, but not limited to sales and use tax, value-added taxes and any other governmental charges and duties connected with the services provided by BITMAIN or the payment of any amounts hereunder. The Purchaser agrees to provide BITMAIN with the tax payment certificate or acknowledgement or the confirmation email issued by the relevant state tax authorities regarding the abovementioned taxes as applicable. 3.8 The Purchaser shall indemnify and hold BITMAIN harmless from and against any and all liability of tax filing, claims, late payment interest, fines, penalties in relation to sales and use tax, value-added taxes and any other governmental charges and duties connected with the services provided by BITMAIN or the payment of any amounts hereunder. 4. Shipping of Products 4.1 The Parties agree that the shipping of the Products shall be completed as follows: (a) BITMAIN shall notify the Purchaser when a batch or a portion of the batch of the Products is ready for shipment (“Ready-to-Ship Notification”) during or after the Shipping Period as set forth in Appendix A (in any event no later than 30th day after the expiration of the Shipping Period as set forth in Appendix A), provided that, the Purchaser shall have fulfilled its payment obligations in accordance with this Agreement. For each batch, BITMAIN shall be entitled to ship by installments and send a Ready-to-Ship Notification for each installment. BITMAIN shall be deemed to have fulfilled its obligation to deliver the Products once BITMAIN sends the Purchaser the Ready-to-Ship Notification.

V3.1.20221230(US) Pages 7 of 28 (b) Within three (3) days upon the receipt of the Ready-to-Ship Notification, the Purchaser shall inform BITMAIN of a shipping address or its intention to self-pick up the Products in a manner as agreed by the Parties (the “Confirmation”). The title and risk of loss or damage to the Products shall pass to the Purchaser when BITMAIN delivers the Products to the carrier, or when the Purchaser self-picks up the Products, whichever is applicable. (c) If the Purchaser fails to provide the Confirmation within thirty (30) days following receipt of the Ready-to-Ship Notification, BITMAIN shall be entitled to handle the Products in any manner it deems appropriate. (d) Under no circumstance shall BITMAIN be required to refund the payment already made if the Purchaser fails to provide the Confirmation. 4.2 Subject to Clause 4.1 and the limitations stated in Appendix A, the terms of delivery of the Products shall be FCA (BITMAIN’s warehouse) according to Incoterms 2020. BITMAIN shall send a shipping confirmation to the Purchaser after it has delivered the Products to the carrier. The Parties hereby acknowledge and agree that the delivery of the Products to the carrier shall occur outside of the United States. 4.3 In the event of any discrepancy between this Agreement and BITMAIN’s cargo insurance policy regarding the insurance coverage, the then effective BITMAIN cargo insurance policy shall prevail, and BITMAIN shall be required to provide the then effective insurance coverage to the Purchaser. 4.4 If BITMAIN, at its own fault, fails to send the Ready-to-Ship Notification within thirty (30) days after the expiration of the Shipping Period as set forth in Appendix A, the Purchaser shall be entitled to cancel such batch of Products and request BITMAIN to refund the respective price of such undelivered batch of Products already paid by the Purchaser together with an interest at 0.0333% per day for the period from the next day of each payment of the price of such batch of Products to the date immediately prior to the request. In the event that the Purchaser does not cancel undelivered batch of Products and requests BITMAIN to perform its delivery obligation, BITMAIN shall continue to perform its delivery obligation and compensate the Purchaser in accordance with Clause 4.5 of this Agreement. 4.5 If BITMAIN, at its own fault, fails to send the Ready-to-Ship Notification within thirty (30) days after expiration of the Shipping Period as set forth in Appendix A and the Purchaser does not cancel such batch of Products and requests BITMAIN to perform its delivery obligations, BITMAIN shall make a compensation to the Purchaser on daily basis , the amount of which shall equal to 0.0333% of the respective price of such undelivered batch of Products, which already paid by the Purchaser, which compensation shall be made in the form of delivery of more Products increasing the total hashrate. Compensation amount less than the equivalence to the Rated Hashrate per Unit of Product shall be credited to the balance of the Purchaser.

V3.1.20221230(US) Pages 8 of 28 4.6 There are (3) batches of Products under this Agreement and each batch shall constitute independent legal obligations of and shall be performed separately by the Parties. The delay of a particular batch shall not constitute waiver of the payment obligations of the Purchaser in respect of other batches. The Purchaser shall not terminate this Agreement solely on the ground of delay of delivery for a single batch of Products. 4.7 The Purchaser shall choose the following shipping method: ✔Shipping by BITMAIN via FedEx/DHL/UPS/other logistics company Self-pick Logistics costs shall be borne by the Purchaser. BITMAIN shall be entitled to collect payments on behalf of the logistics service providers and issue logistics service invoices if the Purchaser requests BITMAIN to send the Products. 4.8 Notwithstanding anything to the contrary contained in Clauses 4.4 and 4.5, under no circumstances, BITMAIN shall be responsible for any delivery delay caused by the Purchaser or any third party, including but not limited to the carrier, the customs, and the import brokers, nor shall it be liable for damages, whether direct, indirect, incidental, consequential, or otherwise, for any failure, delay or error in delivery of any Products for any reason whatsoever. 4.9 BITMAIN shall not be responsible for, and the Purchaser shall be fully and exclusively responsible for any loss of Product(s), personal injury, property damage, other damage or liability caused by the Product(s) or the transportation of the Product(s) either to the Purchaser or any third party, or theft of the Product(s) during transportation from BITMAIN to the Purchaser. 4.10 BITMAIN has the right to discontinue the sales of the Products and to make changes to its Products at any time, without prior approval from or notice to the Purchaser. 4.11 If the Product(s) is rejected and/or returned to BITMAIN due to any reason and regardless of the cause of such delivery failure, the Purchaser shall be solely and exclusively liable for and shall defend, fully indemnify and hold harmless BITMAIN against any and all related expenses, fees, charges and costs incurred, arising out of or incidental to such rejection and/or return (the “Return Expense”). Furthermore, if the Purchaser would like to ask for BITMAIN’s assistance in redelivering such Product(s) or assist in any other manner, and if BITMAIN at its sole discretion decides to provide this assistance, then in addition to the Return Expense, the Purchaser shall also pay BITMAIN an administrative fee in accordance with BITMAIN’s then applicable internal policy. 4.12 If the Purchaser fails to provide BITMAIN with the Confirmation or the shipping address provided by the Purchaser is a false address or does not exist, or the Purchaser rejects to accept the Products when delivered, any related costs occurred (including storage costs, warehousing charge and labor costs) shall be borne by the Purchaser.

V3.1.20221230(US) Pages 9 of 28 4.13 The Purchaser shall inspect the Products within two (2) days (the “Acceptance Time”) after receiving the Products (the date of signature on the carrier’s delivery voucher shall be the date of receipt). If the Purchaser does not raise any written objection within the Acceptance Time, the Products delivered by BITMAIN shall be deemed to be in full compliance with the provisions of this Agreement. The Products delivered are neither returnable nor refundable. 5. Customs 5.1 BITMAIN shall obtain in due time and maintain throughout the term of this Agreement (if applicable), any and all approvals, permits, authorizations, licenses and clearances for the export of the Product(s) that are required to be obtained by BITMAIN or the carrier under Applicable Laws. 5.2 The Purchaser shall obtain in due time and maintain throughout the term of this Agreement (if applicable), any and all approvals, permits, authorizations, licenses and clearances required for the import of the Products to the country of delivery as indicated in the shipping information, that are required to be obtained by the Purchaser or the carrier under Applicable Laws, and shall be responsible for any and all additional fees, expenses and charges in relation to the import of the Products. 5.3 As far as permitted by laws, except for the Warranty as set forth in Clause 6, BITMAIN provides no other warranty, explicit or implied, in any form, including but not limited to the warranty of the marketability, satisfaction of the quality, suitability for the specific purpose, not infringing third party’ s right, etc. In addition, BITMAIN shall not be responsible for any direct, specific, incidental, accidental or indirect loss arising from the use of the Products, including but not limited to the loss of commercial profits. 5.4 BITMAIN shall not be liable for any loss caused by: (a) failure of the Purchaser to use the Products in accordance with the manual, specifications, operation descriptions or operation conditions provided by BITMAIN in writing; (b) the non-operation of the Products during the replacement/maintenance period or caused by other reasons; or (c) confiscation, seizure, search or other actions taken by government agencies such as customs. 6. Warranty 6.1 The Warranty Period shall start on the Warranty Start Date and end on the 365th day after the Warranty Start Date. During the Warranty Period, the Purchaser’s sole and exclusive remedy, and BITMAIN’s entire liability, will be to repair or replace, at BITMAIN’s option, the defective part /component of the Product(s) or the defective Product(s) at no charge to the Purchaser. If the

V3.1.20221230(US) Pages 10 of 28 Purchaser requires BITMAIN to provide any Warranty services, the Purchaser shall complete the appropriate actions on the BITMAIN Website in accordance with the requirements of BITMAIN and send the Product(s) to the place designated by BITMAIN within the time limit required by BITMAIN. Otherwise, BITMAIN shall be entitled to refuse to provide the Warranty services. 6.2 The Parties acknowledge and agree that the warranty provided by BITMAIN as stated in the preceding paragraph does not apply to the following: (a) normal wear and tear; (b) damage resulting from accident, abuse, misuse, neglect, improper handling or improper installation; (c) damage or loss of the Product(s) caused by undue physical or electrical stress, including but not limited to moisture, corrosive environments, high voltage surges, extreme temperatures, shipping, or abnormal working conditions; (d) damage or loss of the Product(s) caused by acts of nature including, but not limited to, floods, storms, fires, and earthquakes; (e) damage caused by operator error, or non-compliance with instructions as set out in accompanying documentation provided by BITMAIN; (f) alterations by persons other than BITMAIN, or its associated partners or authorized service facilities; (g) Product(s), on which the original software has been replaced or modified by persons other than BITMAIN, or its associated partners or authorized service facilities; (h) counterfeit products; (i) damage or loss of data due to interoperability with current and/or future versions of operating system, software and/or hardware; (j) damage or loss of data caused by improper usage and behavior which is not recommended and/or permitted in the product documentation provided by BITMAIN; (k) failure of the Product(s) caused by usage of products not supplied by BITMAIN; and (l) hash boards or chips are burnt. In case the warranty is voided, BITMAIN may, at its sole discretion, provide repair service to the Purchaser, and the Purchaser shall bear all related expenses and costs. 6.3 Notwithstanding anything to the contrary herein, the Purchaser acknowledges and agrees that the Products provided by BITMAIN do not guarantee any cryptocurrency mining time and, BITMAIN shall not be liable for any cryptocurrency mining time loss or cryptocurrency mining revenue loss that are caused by downtime of any part/component of the Products. BITMAIN does not warrant that the Products will meet the Purchaser’s requirements or the Products will be uninterrupted or error free. Except as provided in Clause 6.1, BITMAIN makes no warranties to the Purchaser with respect

V3.1.20221230(US) Pages 11 of 28 to the Products, and no warranties of any kind, whether written, oral, express, implied or statutory, including warranties of merchantability, fitness for a particular purpose or non-infringement or arising from course of dealing or usage in trade shall apply. 6.4 In the event of any ambiguity or discrepancy between this Clause 6 and BITMAIN’s After-sales Service Policy from time to time, it is intended that the After-sales Service Policy shall prevail and the Parties shall comply with and give effect to the After-sales Service Policy. Please refer to BITMAIN Website for detailed terms of warranty and after-sales maintenance. BITMAIN has no obligation to notify the Purchaser of the update or modification of such terms. 6.5 During the warranty period, if the hardware of the product(s) needs to be repaired or replaced, the Purchaser shall bear the logistics costs of shipping the Product(s) to the address designated by BITMAIN, and BITMAIN shall bear the logistics costs of shipping back the repaired or replaced Product(s) to the address designated by the Purchaser. The Purchaser shall bear all and any additional costs incurred due to incorrect or incomplete delivery information provided by the Purchaser and all and any risks of loss or damage to the Product(s), or the parts or components of the Products(s) during the transportation period (including the transportation period when the product is sent to BITMAIN and returned by BITMAIN to the Purchaser). 7. Representations and Warranties 7.1 The Purchaser makes the following representations and warranties to BITMAIN: (a) It is duly incorporated or organized, validly existing and in good standing (or equivalent status in the relevant jurisdiction) under the laws of the jurisdiction of its incorporation or organization. It has the full power and authority to own its assets and carry on its businesses. (b) The obligations expressed to be assumed by it under this Agreement are legal, valid, binding and enforceable obligations. (c) It has the power to enter into, perform and deliver, and has taken all necessary action to authorize its entry into, performance and delivery of, this Agreement and the transactions contemplated by this Agreement. (d) The entry into and performance by it of, and the transactions contemplated by, this Agreement do not and will not conflict with any Applicable Laws, its constitutional documents; or any agreement or instrument binding upon it or any of its assets. (e) All authorizations required or desirable, to enable it lawfully to enter into, exercise its rights under and comply with its obligations under this Agreement; to ensure that those obligations are legal, valid, binding and enforceable; and to make this Agreement admissible in evidence in its jurisdiction of incorporation, have been, or will have been by the time, obtained or effected and are, or will be by the appropriate time, in full force and effect.

V3.1.20221230(US) Pages 12 of 28 (f) It is not aware of any circumstances which are likely to lead to any authorization obtained or effected not remaining in full force and effect, any authorization not being obtained, renewed or effected when required or desirable; or any authorization being subject to a condition or requirement which it does not reasonably expect to satisfy or the compliance with which has or could reasonably be expected to have a material adverse effect. (g) It is not the target of economic sanctions administered by the Office of Foreign Assets Control of the U.S. Department of the Treasury, the U.S. Department of State, the United Nations Security Council, the European Union (“Sanctions”), including by being listed on the Specially Designated Nationals and Blocked Persons (SDN) List maintained by OFAC or any other Sanctions list maintained by one of the foregoing governmental authorities, directly or indirectly owned or controlled by one or more SDNs or other Persons included on any other Sanctions list, or located, organized or resident in a country or territory that is the target of Sanctions; and (b) the purchase of the Products will not violate any Sanctions or import and export control related laws and regulations. (h) All information supplied by the Purchaser is and shall be true and correct, and the information does not contain and will not contain any statement that is false or misleading. (i) It acknowledges and agrees that, in entering into this Agreement, BITMAIN has relied on the warranties set forth in this Clause 7.1. 8. Indemnification and Limitation of Liability 8.1 The Purchaser shall, during the term of this Agreement and at any time thereafter, indemnify and save BITMAIN and/or its Affiliates harmless from and against any and all damages, suits, claims, judgments, liabilities, losses, fees, costs or expenses of any kind, including legal fees, whatsoever arising out of or incidental to the Products pursuant to this Agreement. 8.2 Notwithstanding anything to the contrary herein, BITMAIN and its Affiliates shall under no circumstances, be liable to the Purchaser for any consequential loss, or any indirect, incidental, special, exemplary or punitive damages, or any measure of damages based on diminution in value or based on any loss of goodwill, business, anticipated profits, revenue, contract, or business opportunity or similar concept arising out of or in connection with this Agreement, and the Purchaser hereby waives any claim it may at any time have against BITMAIN and its Affiliates in respect of any such damages. The foregoing limitation of liability shall apply whether in an action at law, including but not limited to contract, strict liability, negligence, willful misconduct or other tortious action, or an action in equity.

V3.1.20221230(US) Pages 13 of 28 8.3 BITMAIN and its Affiliates’ cumulative aggregate liability pursuant to this Agreement, whether arising from tort, breach of contract or any other cause of action shall be limited to and not exceed the amount of one hundred percent (100%) of the payment actually received by BITMAIN from the Purchaser for the Products under this Agreement. 8.4 The Products are not designed, manufactured or intended for use in hazardous or critical environments or in activities requiring emergency or fail-safe operation, such as the operation of nuclear facilities, aircraft navigation or communication systems or in any other applications or activities in which failure of the Products may pose the risk of environmental harm or physical injury or death to humans. In addition to the disclaimer of warranties set forth in Clause 6.3, BITMAIN further disclaims any express or implied warranty of fitness for any of the above described applications and any such use shall be at the Purchaser’s sole risk. 8.5 The above limitations and exclusions shall survive and apply: (a) notwithstanding failure of essential purpose of any exclusive or limited remedy; and (b) whether or not BITMAIN has been advised of the possibility of such damages. The Parties acknowledge the limitation of liability and the allocation of risks in this Clause 8 is an essential element of the basis of the bargain between the Parties under this Agreement and BITMAIN’s pricing reflects this allocation of risks and the abovementioned limitations of liability. 9. Distribution 9.1 This Agreement does not constitute a distributor agreement between BITMAIN and the Purchaser. Therefore, the Purchaser acknowledges that it is not an authorized distributor of BITMAIN. 9.2 The Purchaser shall in no event claim or imply to a third party that it is an authorized distributor of BITMAIN or BITMAIN (ANTMINER) or their respective Affiliates, or perform any act that will cause it to be construed as an authorized distributor of BITMAIN or BITMAIN (ANTMINER) or their respective Affiliates. As between the Purchaser and BITMAIN, the Purchaser shall be exclusively and fully responsible for complying with the Applicable Laws regarding repackaging the Products for the Purchaser’s redistribution needs, and shall be solely liable for any and all liabilities or costs directly incurred or incidental to such redistribution. 10. Intellectual Property Rights 10.1 The Parties agree that the Intellectual Property Rights in any way contained in the Products, made, conceived or developed by BITMAIN and/or its Affiliates for the Products under this

V3.1.20221230(US) Pages 14 of 28 Agreement and/or, achieved, derived from, related to, connected with the provision of the Products by BITMAIN and/or acquired by BITMAIN from any other person in performance of this Agreement shall be the exclusive property of BITMAIN and/or its Affiliates. 10.2 Notwithstanding anything to the contrary herein, all Intellectual Property Rights in the Products shall remain the exclusive property of BITMAIN and/or its licensors. Except for licenses explicitly identified in BITMAIN’s shipping confirmation or in this Clause 10.2, no rights or licenses are expressly granted, or implied, whether by estoppel or otherwise, in respect of any Intellectual Property Rights of BITMAIN and/or its Affiliates or any Intellectual Property residing in the Products provided by BITMAIN to the Purchaser, including in any documentation or any data furnished by BITMAIN. BITMAIN grants the Purchaser a non-exclusive, non-transferrable, royalty-free and irrevocable license of BITMAIN and/or its Affiliates’ Intellectual Property Rights to solely use the Products delivered by BITMAIN to the Purchaser for their ordinary function, and subject to the provisions set forth herein. The Purchaser shall in no event violate the Intellectual Property Rights of BITMAIN and/or its licensors. 10.3 The Purchaser shall not illegally use or infringe the Intellectual Property Rights of the Products in any way. Otherwise, BITMAIN shall have the right to request the Purchaser to take immediate remedial measures and assume full responsibilities, including but not limited to ceasing the infringement immediately, eliminating the impact, and compensating BITMAIN and/or its suppliers for all losses arising out of the infringement, etc. 10.4 The Purchaser shall not use any technical means to disassemble, mapping or analyze the Products of BITMAIN, and shall not reverse engineer or otherwise attempt to derive or obtain information about the function, manufacture or operation of the Products, to retrieve relevant technical information of the Products and use it for commercial purposes. Otherwise, the Purchaser shall be liable for losses caused to BITMAIN in accordance with Clause 10.3. 10.5 If applicable, payment by the Purchaser of non-recurring charges to BITMAIN for any special designs, or engineering or production materials required for BITMAIN’s performance of obligations for customized Products, shall not be construed as payment for the assignment from BITMAIN to the Purchaser of title to such special design, engineering or production materials. BITMAIN shall be the sole owner of such special designs, engineering or production materials with regard to such Products. 11. Confidentiality and Communications 11.1 All information concerning this Agreement and matters pertaining to or derived from the provision of Products pursuant to this Agreement between the Parties, whether in oral or written form, or in the form of drawings, computer programs or other, as well as all data derived therefrom (“Confidential Information”), shall be deemed to be confidential and, as such, may not be divulged to

V3.1.20221230(US) Pages 15 of 28 any unauthorized person. The Purchaser undertakes and agrees to take all reasonable and practicable steps to ensure and protect the confidentiality of the Confidential Information which cannot be passed, sold, traded, published or disclosed to any unauthorized person. 12. Term of this Agreement 12.1 The Parties agree that, unless this Agreement specifies otherwise, no Party shall terminate this Agreement in advance. 12.2 This Agreement shall be effective upon execution by both Parties of this Agreement and shall remain effective up to and until the delivery of the last batch of Products. 13. Notices 13.1 All notices, requirements, requests, claims, and other communications in relation to this Agreement shall be in writing, and shall be given or made by delivery in person, by an internationally recognized overnight courier service, by facsimile or registered or certified mail (postage prepaid, return receipt requested) or electronic mail to the respective Parties at the addresses specified below or at such other address for a Party as may be specified in a notice given in accordance with this Clause 13. 13.2 The Purchaser undertakes that the documents, materials, vouchers, order information, payment account information, credential numbers, mobile phone numbers, transaction instructions and so on provided by the Purchaser shall be true, correct, complete and effective, and the information does not contain any statement that is false or misleading. 13.3 If there is any suspicious transaction, illegal transaction, risky transaction or other risky events of the Purchaser’s account registered on BITMAIN Website, the Purchaser agrees that BITMAIN shall have the right to disclose the Purchaser’s registration information, transaction information, identity information, logistics information upon the request of relevant judicial agencies, regulatory agencies or third-party payment institutions for investigation purpose. In addition, if necessary, the Purchaser shall provide further information upon BITMAIN’s request. 13.4 The following are the initial address of each Party: If to the Purchaser: Address: 9 Federal Street, Easton, MD 21601 USA Attn: Nazar Khan Phone: +1 4107709500 Email: khan@terawulf.com

V3.1.20221230(US) Pages 16 of 28 If to BITMAIN: Address: 840 New Burton Street, Suite 201, Dover, Kent, DE 19904 Attn: Bozhao Yu Phone: +1 6464684535 bozhao.yu@bitmain.com, with a copy to legal@bitmain.com and invoice@bitmain. Email: com 13.5 All such notices and other communications shall be deemed effective in the following situations: (a) if sent by delivery in person, on the same day of the delivery; (b) if sent by registered or certified mail or overnight courier service, on the same day the written confirmation of delivery is sent; and (c) if sent by electronic mail, at the entrance of the related electronic mail into the recipient’s electronic mail server. 14. Compliance with Laws and Regulations 14.1 The Purchaser undertakes that it will fully comply with all Applicable Laws in relation to export and import control and Sanctions and shall not take any action that would cause BITMAIN or any of its Affiliates to be in violation of any export and import control laws or Sanctions. The Purchaser shall also be fully and exclusively liable for and shall defend, fully indemnify and hold harmless BITMAIN and/or its Affiliates from and against any and all claims, demands, actions, costs or proceedings brought or instituted against BITMAIN and/or its Affiliates arising out of or in connection with any breach by the Purchaser or the carrier of any Applicable Laws in relation to export and import control or Sanction. 14.2 The Purchaser acknowledges and agrees that the Products in this Agreement are subject to the export control laws and regulations of all related countries, including but not limited to Export Administration Regulations of the United States (“EARs”). Without limiting the foregoing, the Purchaser shall not, without receiving the proper licenses or license exceptions from all related governmental authorities, including but not limited to the U.S. Bureau of Industry and Security, distribute, re-distribute, export, re-export, or transfer any Products subject to this Agreement either directly or indirectly, to any national of any country identified in Country Groups D:1 or E:1 as defined in the EARs. In addition, the Products under this Agreement may not be exported, re-exported, or transferred to (a) any person or entity for military purposes; (b) any person or entity listed on the “Entity List”, “Denied Persons List” or the SDN List as such lists are maintained by the U.S. Government, or (c) an end-user engaged in activities related to weapons of mass destruction. Such activities include but are not necessarily limited to activities related to: (x) the design,

V3.1.20221230(US) Pages 17 of 28 development, production, or use of nuclear materials, nuclear facilities, or nuclear weapons; (y) the design, development, production, or use of missiles or support of missiles projects; and (z) the design, development, production, or use of chemical or biological weapons. The Purchaser further agrees that it will not do any of the foregoing in violation of any restriction, law, or regulation of the European Union or an individual EU member state that imposes on an exporter a burden equivalent to or greater than that imposed by the U.S. Bureau of Industry and Security. 14.3 The Purchaser undertakes that it will not take any action under this Agreement or use the Products in a way that will be a breach of any anti-money laundering laws, any anti-corruption laws, and/or any counter-terrorist financing laws. 14.4 The Purchaser warrants that the Products have been purchased with funds that are from legitimate sources and such funds do not constitute proceeds of criminal conduct, or realizable property, or proceeds of terrorism financing or property of terrorist. If BITMAIN receives, including but not limited to investigation, evidence collection, restriction and other measures, from any competent organizations or institutions, the Purchaser shall immediately cooperate with BITMAIN and such competent organizations or institutions in the investigation process, and BITMAIN may request the Purchaser to provide necessary security if so required. If any competent organizations or institutions request BITMAIN to seize or freeze the Purchaser’s Products and funds (or take any other measures), BITMAIN shall be obliged to cooperate with such competent organizations or institutions, and shall not be deemed as breach of this Agreement. The Purchaser understands that if any Person resident in the Relevant Jurisdiction knows or suspects or has reasonable grounds for knowing or suspecting that another Person is engaged in criminal conduct or is involved with terrorism or terrorist property and the information for that knowledge or suspicion came to their attention in the course of business in the regulated sector, or other trade, profession, business or employment, the Person will be required to report such knowledge or suspicion to the competent authority. The Purchaser acknowledges that such a report shall not be treated as breach of confidence or violation of any restriction upon the disclosure of information imposed by any Applicable Law, contractually or otherwise. 15. Force Majeure 15.1 To the extent that the performance of any obligation of either Party under this Agreement (other than an obligation to make payment) is prevented, frustrated, hindered or delayed as a consequence of a Force Majeure Event and subject to the exercise of reasonable diligence by the other Party, the obligations of Parties to the extent they are affected by the Force Majeure Event (other than an obligation to make payment), shall be suspended for the duration of any inability so caused; provided that, the Party claiming the benefit of this provision shall, as soon as reasonably practicable after the occurrence of such event: (i) notify the other Party of the nature, condition, date of inception and

V3.1.20221230(US) Pages 18 of 28 expected duration of such Force Majeure Event and the extent to which the claiming Party expects that the Force Majeure Event may delay, prevent or hinder such Party from performing its obligations under this Agreement; and (ii) use its best effort to remove any such causes and resume performance under this Agreement as soon as reasonably practicable and mitigate its effects. 15.2 Except in the case of an event of Force Majeure, neither party may terminate this Agreement prior to its expiry date. 15.3 The Purchaser hereby acknowledges and warrants that this Agreement shall not be terminated by the Purchaser for the reasons of the restrictions or prohibitions of the cryptocurrency mining activities by any Applicable Laws or Governmental Authority. This Clause 15.3 shall prevail over all other clauses herein. 16. Entire Agreement and Amendment 16.1 This Agreement constitutes the entire agreement of the Parties hereto and can only be amended with the written consent of both Parties or otherwise as mutually agreed by both Parties. 17. Assignment 17.1 BITMAIN may freely assign or transfer any of its rights, benefits or obligations under this Agreement in whole or in part to its Affiliates or to any third party. The Purchaser may not assign or transfer any of its rights, benefits or obligations under this Agreement in whole or in part without BITMAIN’s prior written consent. 17.2 This Agreement shall be binding upon and inure to the benefit of each Party to this Agreement and its successors in title and permitted assigns. 18. Severability 18.1 To the extent possible, if any provision of this Agreement is held to be illegal, invalid or unenforceable in whole or in part by a court, the provision shall apply with whatever deletion or modification is necessary so that such provision is legal, valid and enforceable and gives effect to the commercial intention of the Parties. The remaining provisions of this Agreement shall not be affected and shall remain in full force and effect. 19. Personal Data 19.1 Depending on the nature of the Purchaser’s interaction with BITMAIN, some examples of personal data which BITMAIN may collect from the Purchaser include the Purchaser’s name and

V3.1.20221230(US) Pages 19 of 28 identification information, contact information such as the Purchaser’s address, email address and telephone number, nationality, gender, date of birth, and financial information such as credit card numbers, debit card numbers and bank account information. 19.2 BITMAIN generally does not collect the Purchaser’s personal data unless (a) it is provided to BITMAIN voluntarily by the Purchaser directly or via a third party who has been duly authorized by the Purchaser to disclose the Purchaser’s personal data to BITMAIN (the Purchaser’s “authorized representative”) after (i) the Purchaser (or the Purchaser’s authorized representative) has been notified of the purposes for which the data is collected, and (ii) the Purchaser (or the Purchaser’s authorized representative) has provided written consent to the collection and usage of the Purchaser’s personal data for those purposes, or (b) collection and use of personal data without consent is permitted or required by related laws. BITMAIN shall seek the Purchaser’s consent before collecting any additional personal data and before using the Purchaser’s personal data for a purpose which has not been notified to the Purchaser (except where permitted or authorized by Applicable Laws). 20. Conflict with the Terms and Conditions 20.1 In the event of any ambiguity or discrepancy between the provisions of this Agreement and the Terms and Conditions of BITMAIN from time to time, the provisions of this Agreement shall prevail and the Parties shall comply with and give effect to this Agreement. 21. Governing Law and Dispute Resolution 21.1 This Agreement shall be solely governed by and construed in accordance with the laws of the State of New York, the United States. 21.2 All disputes arising under this agreement shall be governed by and interpreted in accordance with the laws of the State of New York, without regard to principles of conflict of laws. The parties to this agreement will submit all disputes arising under this agreement to arbitration in Houston, Texas before a single arbitrator of the American Arbitration Association (“AAA”). The arbitrator shall be selected by application of the rules of the AAA, or by mutual agreement of the parties, except that such arbitrator shall be an attorney admitted to practice law in the State of New York. No party to this agreement will challenge the jurisdiction or venue provisions as provided in this section. No party to this agreement will challenge the jurisdiction or venue provisions as provided in this section. Nothing contained herein shall prevent the party from obtaining an injunction. EACH PARTY HEREBY IRREVOCABLY AND UNCONDITIONALLY WAIVES ANY AND ALL RIGHT TO TRIAL BY JURY IN ANY ACTION, SUIT, PROCEEDING OR COUNTERCLAIM ARISING OUT OF OR RELATING TO THIS AGREEMENT OR THE TRANSACTIONS CONTEMPLATED HEREBY, WHETHER BASED ON CONTRACT, TORT OR ANY OTHER THEORY.

V3.1.20221230(US) Pages 20 of 28 22. Waiver 22.1 Failure by either Party to enforce at any time any provision of this Agreement, or to exercise any election of options provided herein shall not constitute a waiver of such provision or option, nor affect the validity of this Agreement or any part hereof, or the right of the waiving Party to thereafter enforce each and every such provision or option. 23. Counterparts and Electronic Signatures 23.1 This Agreement may be executed in one or more counterparts, each of which will be deemed to be an original copy of this Agreement, and all of which, when taken together, will be deemed to constitute one and the same agreement. The facsimile, email or other electronically delivered signatures of the Parties shall be deemed to constitute original signatures, and facsimile or electronic copies hereof shall be deemed to constitute duplicate originals. 24. Further Assurance 24.1 Each Party undertakes to the other Party to execute or procure to be executed all such documents and to do or procure to be done all such other acts and things as may be reasonable and necessary to give all Parties the full benefit of this Agreement. [The rest part of the page is intentionally left in blank]

V3.1.20221230(US) Pages 21 of 28 Signed for and on behalf of BITMAIN BITMAIN TECHNOLOGIES DELAWARE LIMITED Signature Title Signed for and on behalf of the Purchaser TeraLease LLC Signature Title Patrick Fleury Chief Financial Officer /s/ Patrick Fleury

V3.1.20221230(US) Pages 22 of 28 APPENDIX A 1. Information of Products. 1.1 The specifications of the Products are as follows: Type Details Product Name HASH Super Computing Server Model S19j XP Rated hashrate per unit, T 151.00 Rated power per unit, W 3,246.50 J/T 21.50 Contracted Hashrate, T 2,285,838.00 Quantity of the Products 15,138 Description 1. BITMAIN undertakes that the error range of the J/T indicator does not exceed 10%. 2. The Rated Hashrate per Unit and rated power per unit are for reference only and such indicator of each batch or unit of Products may differ. BITMAIN makes no representation on the Rated Hashrate per Unit and/or the rated power per unit of any Products. Purchaser shall not reject the Products on the grounds that the parameters of the delivered Products are not in consistence with the reference indicators.

V3.1.20221230(US) Pages 23 of 28 1.2 It is estimated that each batch of Products shall be purchased and delivered in accordance with the following arrangements: Batch Model Shipping Period Reference Quantity Total Rated Hashrate (T) Purchase Unit Price(US$/T) Corresponding Total Purchase Price(US$) SALE-0626- 2023- S19j XP 2023-10 5,046 761,946.00 33.00 25,144,218.00 S19j XP-01 SALE-0626- 2023- S19j XP 2023-11 5,046, subject to 1.7(a) below 761,946.00 33.00 25,144,218.00 S19j XP-02 SALE-0626- 2023- S19j XP 2023-12 5,046, subject to 1.7(b) below 761,946.00 33.00 25,144,218.00 S19j XP-03 In Total 15,138 2,285,838.00 / 75,432,654.00 Total Purchase Price (tax exclusive): US$ 75,432,654.00 1.4 BITMAIN represents that all Products shall have a country of origin other than China and/or any OFAC-Sanctioned country. The Purchaser may reject any Products with a country of origin inside China or any other OFAC-Sanctioned country and BITMAIN shall replace and provide identical Product manufactured in accordance herewith, per the inspection provisions set out in in Section 4.13 of the Agreement. 1.5 Both Parties confirm and agree that BITMAIN shall be entitled to adjust the total quantity of each batch of Products based on the total hashrate; provided that, the total hashrate of the Products actually

V3.1.20221230(US) Pages 24 of 28 delivered by BITMAIN to the Purchaser shall not be less than the Contracted Hashrate as agreed in Clause 1.1 of this Appendix A. BITMAIN makes no representation that the quantity of the actually delivered Products shall be the same as the Quantity of the Products set forth in Clause 1.1 of this Appendix A. 1.6 In the event that BITMAIN publishes any new type of products with less J/T value and suspends the production of the type of the Products as agreed in this Agreement, BITMAIN shall be entitled to release itself from any future obligation to deliver any subsequent Products by 10-day prior notice to the Purchaser and continue to deliver new types of products to the Purchaser, the total hashrate of

V3.1.20221230(US) Pages 25 of 28 which shall be no less than such subsequent Products replaced under this Agreement and the price of which shall be determined in accordance with the J/T value. In the event that the Purchaser explicitly refuses to accept new types of products, the Purchaser is entitled to request for a refund of the remaining balance of the Total Purchase Price already paid by the Purchaser with no interest in two (2) years. If the Purchaser accepts the new types of Products delivered by BITMAIN, BITMAIN shall be obliged to deliver such new types of products to fulfill its obligations under this Agreement. The Purchaser may request to lower the total hashrate of the products delivered but shall not request to increase the total hashrate to the level exceeding the total hashrate as set out in this Agreement. After BITMAIN publishes new types of products and if BITMAIN has not suspended the production of the types of Products under this Agreement, BITMAIN shall continue to delivery such agreed types of Products in accordance with this Agreement and the Purchaser shall not terminate this Agreement or refuse to accept the Products on the grounds that BITMAIN has published new type(s) of products. 1.7 Hashrate Bonus Program of S19j XP Q4 2023. (a) The Purchaser shall be eligible to participate in the hashrate bonus program of S19j XP Q4 2023 to receive additional Products for free in accordance with this paragraph if: (i) there are at least three (3) batches of Products as set forth in Clause 4.6 of this Agreement; and (ii) each batch of Products has the same Reference Quantity as any other batch and such Reference Quantity set forth in paragraph 1.2 of this Appendix A is not less than 1,000 units per batch. (b) If the sale and purchase of the first batch of Products is duly completed in accordance with the provisions of this Agreement, BITMAIN will provide additional Products for free to the Purchaser, which will be shipped during the Shipping Period of the second batch of the Products. The total rated hashrate of such additional Products shall be one third (1/3) of the total rated hashrate of the first batch of Products. For the avoidance of doubt, the total rated hashrate of additional Products shipped during the Shipping Period of the second batch of the Products shall not be regarded as part of the second batch of Products. (c) If the sale and purchase of the second batch of Products is duly completed in accordance with the provisions of this Agreement, BITMAIN will provide additional Products for free to the Purchaser, which will be shipped during the Shipping Period of the third batch of the Products. The total rated hashrate of such additional Products shall be one third (1/3) of the total rated hashrate of the second batch of Products. For the avoidance of doubt, the total rated hashrate of additional Products shipped during the Shipping Period of the third batch of the Products shall not be regarded as part of the third batch of Products. 2. Cargo insurance coverage limitations. The cargo insurance coverage provided by BITMAIN is subject to the following limitations and exceptions:

V3.1.20221230(US) Pages 26 of 28 (a) loss damage or expense attributable to willful misconduct of the Assured; (b) ordinary leakage, ordinary loss in weight or volume, or ordinary wear and tear of the subject-matter insured; (c) loss damage or expense caused by insufficiency or unsuitability of packing or preparation of the subject-matter insured (for the purpose of this paragraph, “packing” shall be deemed to include stowage in a container or liftvan but only when such stowage is carried out prior to attachment of this insurance or by the Assured or their servants) (d) loss damage or expense caused by inherent vice or nature of the subject-matter insured (e) loss damage or expense proximately caused by delay, even though the delay be caused by a risk insured against (except expenses payable); (f) loss damage or expense arising from insolvency or financial default of the owners managers charterers or operators of the vessel; (g) loss, damage, or expense arising from the use of any weapon of war employing atomic or nuclear fission, and/or fusion or other like reaction or radioactive force or matter; (h) loss, damage or expense arising from unseaworthiness of vessel or craft, unfitness of vessel craft conveyance container or liftvan for the safe carriage of the subject-matter insured, where the Assured or their servants are privy to such unseaworthiness or unfitness, at the time the subject-matter insured is loaded therein; (i) the Underwriters waive any breach of the implied warranties of seaworthiness of the ship and fitness of the ship to carry the subject-matter insured to destination, unless the Assured or their servants are privy to such unseaworthiness or unfitness; (j) loss, damage or expense caused by (1) war, civil war, revolution, rebellion, insurrection, or civil strife arising therefrom, or any hostile act by or against a belligerent power, (2) capture,

V3.1.20221230(US) Pages 27 of 28 seizure, arrest, restraint or detainment (piracy excepted), and the consequences thereof or any attempt threat, (3) derelict mines, torpedoes, bombs, or other derelict weapons of war; and (k) loss, damage, or expense caused by strikers, locked-out workmen, or persons taking part in labor disturbances, riots or civil commotion, resulting from strikes, lock-outs, labor disturbances, riots or civil commotions, caused by any terrorist or any person acting from a political motive. 3. Payment of the Total Purchase Price 3.1 BITMAIN’s BANK ACCOUNT info: Company Name: Bitmain Technologies Limited Company address: 11/F., Wheelock House, 20 Pedder Street, Central, Hong Kong Account No.: 36807848057 Bank name: Standard Chartered Bank (Hong Kong) Limited Bank address: Payment Centre, 15/F, Standard Chartered Tower, 388 Kwun Tong Road, Kwun Tong, Kowloon, Hong Kong Swift Code: SCBLHKHHXXX 3.2 The payment shall be arranged by the Purchaser as Appendix B. 3.3 Without prejudice to any provisions hereof, the Purchase Unit Price and the Total Purchase Price of the Products and any amount paid or payable by the Purchaser shall be denominated in US Dollars (US$). Where the Parties agree that the payments shall be made in cryptocurrencies, the exchange rate between the US Dollars and the cryptocurrency selected shall be determined by BITMAIN. Unless otherwise agreed by BITMAIN, the cryptocurrency selected shall be the USDT. The exchange rate between the US Dollars and the cryptocurrency shall be fixed according to this provision. In any circumstance, the Purchaser shall not ask for any refund due to the change of exchange rate. 3.4 The Purchaser is entitled to apply coupons to pay up to 30% of the corresponding Total Purchase Price of each batch of Products under this Agreement, subject to the applicable terms and conditions of the purchase and the prevailing coupon use policy of BITMAIN.

V3.1.20221230(US) Pages 28 of 28 APPENDIX B Payment Payment Percentage Payment Date Down Payment 10.00% (i) 5.00% of the Total Purchase Price of all batches of Products hereunder shall be paid by the Purchaser on or before July 10, 2023; and (ii) 5.00% of the Total Purchase Price of all batches of Products hereunder shall be paid by the Purchaser on or before July 30, 2023 Interim Payment 50.00% 50.00% of the Total Purchase Price of each batch of Products shall be paid at least One (1) month prior to the first day of the Shipping Period of such batch of Products Balance Payment 40.00% The remaining of the Total Purchase Price of each batch of Products shall be paid prior to the first day of the Shipping Period of such batch of Products

EX-99.1

Exhibit 99.1

TeraWulf Announces 7.9 EH/s Expansion Plan and Associated Purchase of
18,500 S19j XP Bitcoin Miners from BITMAIN

Increases self-mining by 58% to 7.9 EH/s and over 200 MW of capacity by year end 2023

Creates one of the most efficient and profitable mining fleets in the sector by combining a fleet efficiency of 25.7 J/TH with low-cost 91% zero-carbon power

Represents the first large-scale order of S19j XPs from BITMAIN

EASTON, Md. – July 18, 2023 – TeraWulf Inc. (Nasdaq: WULF) (“TeraWulf” or the “Company”), owner and operator of vertically integrated, domestic Bitcoin mining facilities powered by more than 91% zero-carbon energy, today announced plans to expand its self-mining capacity to 7.9 EH/s by year end with the associated purchase of 18,500 of the next generation Antminer S19j XP bitcoin mining machines for a total price of $75 million. After coupons and credits, the Company currently expects to pay $53.4 million, or $19.10 per terahash, for the miners.

The new S19j XP machines will be deployed at the Company’s Lake Mariner facility in New York where construction of Building 3, which will house 43 MW of capacity, is underway and targeted for completion by year-end 2023. The infrastructure expansion and additional miners are expected to increase the Company’s total self-mining hashrate by approximately 58% (from 5.0 EH¹ to 7.9 EH/s). The Company has already paid the deposit on the new miners.

The BITMAIN purchase order represents the first large-scale order of S19j XPs, which are the next generation unit offered by BITMAIN with a power-efficiency rating of 21.5 joules per terahash (J/TH) and a bitcoin mining hashrate of 151 terahash per second (TH/s) each, for a combined total hashrate of 2.8 exahashes per second (EH/s) for the 18,500 units. According to the purchase agreement, the 18,500 S19j XPs are scheduled to be shipped by BITMAIN in equal monthly allotments in October, November, and December. 

“At TeraWulf, we continue to believe that all hash is not created equal. Our planned expansion with S19j XPs will further establish TeraWulf as one of the most efficient mining fleets in the sector with a fleet efficiency of 25.7 J/TH,” said Nazar Khan, Co-founder and COO of TeraWulf. “Coupled with a realized average cost of power of 3.5 cents per kilowatt hour and average availability in excess of 98%, we are not only expanding hashing capacity with this order but simultaneously positioning the Company for increased profit margins ahead of the next halving.”

Xmei Lin, Head of Sales at BITMAIN commented, “BITMAIN is proud to partner with TeraWulf for the first large-scale order of S19j XPs. The high performance and low energy consumption of our latest generation S19j XP miners represent the most efficient mining equipment in the market and the perfect complement to TeraWulf’s sustainable and low-cost mining business.” 

A Current Report on Form 8-K containing more detailed information regarding the agreement with BITMAIN will be filed by TeraWulf with the Securities and Exchange Commission.

¹ A portion of the new S19j XP miners will replace 5,000 (0.5 EH/s) third-party miners currently hosted by the Company at Lake Mariner pursuant to an agreement that expires in the fourth quarter of 2023.

Exhibit 99.1

About TeraWulf

TeraWulf (Nasdaq: WULF) owns and operates vertically integrated, environmentally clean Bitcoin mining facilities in the United States. Led by an experienced group of energy entrepreneurs, the Company currently has two Bitcoin mining facilities: its wholly owned Lake Mariner facility in New York, and the Nautilus Cryptomine facility in Pennsylvania, a joint venture with Cumulus Coin, LLC. TeraWulf generates domestically produced Bitcoin powered by utilizing nuclear and hydro energy with a goal of utilizing 100% zero-carbon energy. With a core focus on ESG that ties directly to its business success, TeraWulf expects to offer attractive mining economics at an industrial scale.

Forward-Looking Statements

This press release contains forward-looking statements within the meaning of the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995, as amended. Such forward-looking statements include statements concerning anticipated future events and expectations that are not historical facts. All statements, other than statements of historical fact, are statements that could be deemed forward-looking statements. In addition, forward-looking statements are typically identified by words such as “plan,” “believe,” “goal,” “target,” “aim,” “expect,” “anticipate,” “intend,” “outlook,” “estimate,” “forecast,” “project,” “continue,” “could,” “may,” “might,” “possible,” “potential,” “predict,” “should,” “would” and other similar words and expressions, although the absence of these words or expressions does not mean that a statement is not forward-looking. Forward-looking statements are based on the current expectations and beliefs of TeraWulf’s management and are inherently subject to a number of factors, risks, uncertainties and assumptions and their potential effects. There can be no assurance that future developments will be those that have been anticipated. Actual results may vary materially from those expressed or implied by forward-looking statements based on a number of factors, risks, uncertainties and assumptions, including, among others: (1) conditions in the cryptocurrency mining industry, including fluctuation in the market pricing of Bitcoin and other cryptocurrencies, and the economics of cryptocurrency mining, including as to variables or factors affecting the cost, efficiency and profitability of cryptocurrency mining; (2) competition among the various providers of cryptocurrency mining services; (3) changes in applicable laws, regulations and/or permits affecting TeraWulf’s operations or the industries in which it operates, including regulation regarding power generation, cryptocurrency usage and/or cryptocurrency mining; (4) the ability to implement certain business objectives and to timely and cost-effectively execute integrated projects; (5) failure to obtain adequate financing on a timely basis and/or on acceptable terms with regard to growth strategies or operations; (6) loss of public confidence in Bitcoin or other cryptocurrencies and the potential for cryptocurrency market manipulation; (7) the potential of cybercrime, money-laundering, malware infections and phishing and/or loss and interference as a result of equipment malfunction or break-down, physical disaster, data security breach, computer malfunction or sabotage (and the costs associated with any of the foregoing); (8) the availability, delivery schedule and cost of equipment necessary to maintain and grow the business and operations of TeraWulf, including mining equipment and infrastructure equipment meeting the technical or other specifications required to achieve its growth strategy; (9) employment workforce factors, including the loss of key employees; (10) litigation relating to TeraWulf, RM 101 f/k/a IKONICS Corporation and/or the business combination; (11) the ability to recognize the anticipated objectives and benefits of the business combination; and (12) other risks and uncertainties detailed from time to time in the Company’s filings with the Securities and Exchange Commission (“SEC”). Potential investors, stockholders and other readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date on which they were made. TeraWulf does not assume any obligation to publicly update any forward-looking statement after it was made, whether as a result of

Exhibit 99.1

new information, future events or otherwise, except as required by law or regulation. Investors are referred to the full discussion of risks and uncertainties associated with forward-looking statements and the discussion of risk factors contained in the Company’s filings with the SEC, which are available at www.sec.gov.

Company Contact:
Jason Assad

Director of Corporate Communications
assad@terawulf.com

XML

Document and Entity Information	Jul. 14, 2023
Document and Entity Information [Abstract]
Document Type	8-K
Document Period End Date	Jul. 14, 2023
Entity File Number	001-41163
Entity Registrant Name	TERAWULF INC.
Entity Incorporation, State or Country Code	DE
Entity Tax Identification Number	87-1909475
Entity Address State Or Province	MD
Entity Address, Address Line One	9 Federal Street
Entity Address, City or Town	Easton
Entity Address, Postal Zip Code	21601
City Area Code	410
Local Phone Number	770-9500
Written Communications	false
Soliciting Material	false
Pre-commencement Tender Offer	false
Pre-commencement Issuer Tender Offer	false
Title of 12(b) Security	Common stock, $0.001 par value per share
Trading Symbol	WULF
Security Exchange Name	NASDAQ
Entity Emerging Growth Company	false
Entity Central Index Key	0001083301
Amendment Flag	false