10-K

Use these links to rapidly review the document
Table of Contents
ITEM 8. CONSOLIDATED FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549

FORM 10-K

ý	ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
FOR THE FISCAL YEAR ENDED DECEMBER 31, 2011
o	TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

Commission File Number 0-21719

Steel Dynamics, Inc.
(Exact name of registrant as specified in its charter)

Indiana (State or other jurisdiction of incorporation or organization)	35-1929476 (IRS Employer Identification No.)
7575 West Jefferson Blvd, Fort Wayne, IN (Address of principal executive offices)	46804 (Zip Code)

Registrant's telephone number, including area code: (260) 969-3500

         Securities registered pursuant to Section 12(b) of the Act:

Title of each class	Name of each exchange on which registered
Common Stock, $.0025 par value	Nasdaq Global Select Stock Market

         Securities registered pursuant to Section 12(g) of the Act: None

         Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ý    No o

         Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes o    No ý

         Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ý    No o

         Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes ý    No o

         Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. ý

         Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of "large accelerated filer," "accelerated filer" and "smaller reporting company" in Rule 12b-2 of the Exchange Act.

Large accelerated filer ý Accelerated file o Non-accelerated filer o
(Do not check if a
smaller reporting company.) Smaller reporting company o

         Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes o    No ý

         The aggregate market value of the voting stock held by non-affiliates of the registrant computed by reference to the price at which the common equity was last sold as of June 30, 2011, was approximately, $2,813,856,175. Registrant has no non-voting shares. For purposes of this calculation, shares of common stock held by directors, officers and 5% stockholders known to the registrant have been deemed to be owned by affiliates, but this should not be construed as an admission that any such person possesses the power, direct or indirect, to direct or cause the direction of the management or policies of the registrant or that such person is controlled by or under common control with the registrant.

         As of February 17, 2012, Registrant had outstanding 219,035,240 shares of common stock.

DOCUMENTS INCORPORATED BY REFERENCE

         Portions of registrant's definitive proxy statement referenced in Part III, Items 10 through 14 of this report, to be filed prior to April 30, 2012, are incorporated herein by reference.

STEEL DYNAMICS, INC.

Table of Contents

		Page
Part I
Item 1.	Business		2
Item 1A.	Risk Factors		23
Item 1B.	Unresolved Staff Comments		34
Item 2.	Properties		35
Item 3.	Legal Proceedings		36
Item 4.	Mine Safety Disclosures		36
Part II
Item 5.	Market for Registrant's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities		37
Item 6.	Selected Financial Data		39
Item 7.	Management's Discussion and Analysis of Financial Condition and Results or Operation		41
Item 7A.	Quantitative and Qualitative Disclosures About Market Risk		59
Item 8.	Consolidated Financial Statements and Supplementary Data		61
Item 9.	Changes in and Disagreements with Accountants on Accounting and Financial Disclosure		100
Item 9A.	Controls and Procedures		100
Item 9B.	Other Information		100
Part III
Item 10.	Directors, Executive Officers, and Corporate Governance		101
Item 11.	Executive Compensation		101
Item 12.	Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters		101
Item 13.	Certain Relationships and Related Transactions, and Director Independence		101
Item 14.	Principal Accounting Fees and Services		102
Part IV
Item 15.	Exhibits and Financial Statement Schedules		102

PART I

Special Note Regarding Forward-Looking Statements

        Throughout this report, or in other reports or registration statements filed from time to time with the Securities and Exchange Commission under the Securities Exchange Act of 1934, or under the Securities Act of 1933, as well as in documents we incorporate by reference herein or herefrom, or in press releases or oral statements made by our officers or representatives, we may make statements that express our opinions, expectations, or projections regarding future events or future results, in contrast with statements that reflect present or historical facts. These predictive statements, which we generally precede or accompany by such typical conditional words as "anticipate," "intend," "believe," "estimate," "plan," "seek," "project" or "expect," or by the words "may," "will," or "should," are intended to operate as "forward looking statements" of the kind permitted by the Private Securities Litigation Reform Act of 1995. That legislation protects such predictive and cautionary statements by creating a "safe harbor" from liability in the event that a particular prediction does not turn out as anticipated.

        While we always intend to express our best judgment when we make statements about what we believe will occur in the future, and although we base these statements on assumptions that we believe to be reasonable when made, these forward looking statements are not a guarantee of performance, and you should not place undue reliance on such statements. Forward looking statements are subject to many uncertainties and other variable circumstances, many of which are outside of our control, that could cause our actual results and experience to differ materially from those we thought would occur.

        The following listing represents some, but not necessarily all, of the factors that may cause actual results to differ from those we may have anticipated or predicted:

•

the adverse impact of a recurrent economic recession resulting in a decrease of demand for our products:

•

the continued weak demand for our products within the non-residential construction or other metal consuming industries;

•

the potential impact of continuing high unemployment rates on demand for end products which utilize steel components;

•

conditions affecting steel or recycled metals consumption;

•

U.S. or foreign trade policy affecting the amount of foreign imported steel, or adverse outcomes of pending and future trade cases alleging unlawful practices in connection with steel imports;

•

cyclical changes in market supply and demand for steel and recycled ferrous and nonferrous metals;

•

increased price competition brought about by excess domestic and global steelmaking capacity;

•

changes in the availability or cost of raw materials, such as recycled ferrous metals, iron substitute materials, including pig iron, iron concentrate, or other raw materials or supplies, which we use in our production processes;

•

periodic fluctuations in the availability and cost of electricity, natural gas, or other utilities;

•

the occurrence of unanticipated equipment failures and plant outages;

•

margin compression resulting from our inability to pass increases in costs of raw materials and supplies to our customers;

•

labor unrest, work stoppages and/or strikes involving our own workforce, those of our important suppliers or customers, or those affecting the steel industry in general;

1

•

the impact of, or changes in, environmental law or in the application of other legal or regulatory requirements upon our production processes or costs of production or upon those of our suppliers or customers, including actions by government agencies, such as the U.S. Environmental Protection Agency or related state agencies, on pending or future environmentally related construction or operating permits;

•

the impact of United States government or various governmental agencies introducing laws or regulatory changes in response to the subject of climate change and greenhouse gas emissions, including the introduction of carbon emissions trading mechanisms;

•

private or governmental liability claims or litigation, or the impact of any adverse outcome of any litigation on the adequacy of our reserves or the availability or adequacy of our insurance coverage;

•

changes in our business strategies or development plans which we may adopt or which may be brought about in response to actions by our suppliers or customers, and any difficulty or inability to successfully consummate or implement any planned or potential projects, acquisitions, joint ventures or strategic alliances;

•

the impact of regulatory or other governmental action or inaction upon our receipt of required permits or approvals, or the impact of litigation costs or outcomes, construction delays, cost overruns, technology risk or operational complications upon our ability to complete, start-up or continue to profitably operate a project or a new business, or to complete, integrate and operate any potential acquisitions as anticipated; and

•

uncertainties involving new products or new technologies.

        We also refer you to and urge you to carefully read the Risk Factors discussion at Item 1A of this report to better understand some of the principal risks and uncertainties inherent in our business or in owning our securities, as well as the section entitled Management Discussion and Analysis of Financial Condition and Results of Operations at Item 7. You should also review the notes to consolidated financial statements under headings in Note 1 Use of Estimates and in Note 8 Commitments and Contingencies.

        Any forward looking statements which we make in this report or in any of the documents that are incorporated by reference herein speak only as of the date of such statement, and we undertake no ongoing obligation to update such statements. Comparisons of results between current and any prior periods are not intended to express any future trends or indications of future performance, unless expressed as such, and should only be viewed as historical data.

ITEM 1.    BUSINESS

Our Company

        We are one of the largest steel producers and one of the largest metals recyclers in the United States based on a current estimated annual steelmaking capability of 6.4 million tons and actual recycling volumes. Actual metals recycling shipments during 2011, 2010, and 2009, respectively, were 5.9 million gross tons, 5.2 million gross tons, and 3.6 million gross tons of ferrous materials; and 1.1 billion pounds, 961 million pounds and 780 million pounds of nonferrous metallics. Our steel shipments during 2011, 2010, and 2009 were 5.8 million tons, 5.3 million tons, and 4.0 million tons, respectively. We reported net sales of $8.0 billion, $6.3 billion, and $4.0 billion during 2011, 2010, and 2009, respectively. At December 31, 2011, we employed approximately 6,530 individuals, 89% of whom were non-union.

2

        Steel Dynamics, Inc. was incorporated in Indiana in August 1993. Our principal executive offices are located at 7575 W. Jefferson Boulevard, Fort Wayne, Indiana 46804 and our telephone number is 260.969.3500.

        The primary sources of our revenues are from the manufacture and sale of steel products, processing and sale of recycled ferrous and nonferrous metals, and, to a lesser degree, fabrication and sale of steel joist and decking products. Our operations are managed and reported based on three operating segments: steel operations, metals recycling and ferrous resources operations, and steel fabrication operations.

        Steel Operations.    Steel operations consist of our five electric-arc furnace mini-mills, producing steel from steel scrap, utilizing continuous casting, automated rolling mills, and various downstream finishing facilities. Our steel operations accounted for 61%, 61%, and 63% of our consolidated net sales in 2011, 2010, and 2009 respectively. Collectively, our steel operations sell directly to end users and service centers. These products are used in numerous industry sectors, including the automotive, agriculture, energy, construction, commercial, transportation and industrial machinery markets.

Sheet Products.    Our Flat Roll Division sells a broad range of sheet steel products, such as hot rolled, cold rolled and coated steel products, including a large variety of specialty products such as light gauge hot rolled, galvanized, Galvalume® and painted products. The Techs operations, comprised of three galvanizing lines, also sells specialized galvanized sheet steels used in non-automotive applications. Our sheet operations represented 60%, 63%, and 65% of this segment's net sales in 2011, 2010, and 2009 respectively.

Long Products.    Our Structural and Rail Division sells structural steel beams and pilings and a variety of standard strength and industrial quality grade rail for the railroad industry. Our Engineered Bar Products Division primarily sells special bar quality and merchant bar quality rounds and round-cornered squares. Our Roanoke Bar Division sells billets and merchant steel products, including angles, plain rounds, flats and channels. Steel of West Virginia primarily sells merchant beams, channels and specialty structural steel sections.

        Metals Recycling and Ferrous Resources Operations.    This operating segment includes our metals recycling operations, liquid pig iron production facility, and Minnesota iron operations. Our metals recycling and ferrous resources operations accounted for 35%, 35%, and 31% of our consolidated net sales in 2011, 2010, and 2009 respectively.

Metals Recycling.    Our metals recycling operations represent our metals sourcing and processing operations and are the most significant source of income in this segment. Beginning in 2007, we have significantly grown our metals recycling business through the acquisitions of OmniSource Corporation in October 2007 and Recycle South, LLC in June 2008. Our metals recycling operations sell ferrous metals to steel mills and foundries, and nonferrous metals, such as copper, brass, aluminum and stainless steel to ingot manufacturers, copper refineries and mills, smelters, and specialty mills. Our metals recycling operations represented 95% of this segment's net sales in 2011, and 96% in both 2009 and 2010. Our metals recycling operations also sell ferrous metals to our own steel mills as a raw material. These shipments to our steel mills represented 43%, 42%, and 39% of our metals recycling ferrous shipped tons in 2011, 2010, and 2009, respectively.

Ferrous Resources.    Our ferrous resource operations consist of our two ironmaking initiatives: Iron Dynamics (IDI), a liquid pig iron production facility, and our Minnesota iron operations, an iron nugget production facility and planned operations to supply the nugget facility with its primary raw material, iron concentrate. IDI primarily produces liquid pig iron, which is used as a scrap substitute raw material input exclusively at our Flat Roll Division. Our Minnesota iron operations

3

consists of Mesabi Nugget, (owned 81% by us); our planned future iron mining operations which is currently in the permitting process, Mesabi Mining; and, our planned iron tailings operations, Mining Resources (owned 80% by us.) The construction of the Mesabi Nugget facility was completed in 2009, and initial production of iron nuggets commenced January 2010. Throughout 2010 and 2011, we have refined this pioneering production process and changed equipment configurations to increase production and plant availability. The facility's anticipated annual production capacity is 500,000 metric tons. In 2011 and 2010, Mesabi Nugget produced 156,000 and 75,000 metric tons of iron-nuggets, respectively, for use by our own steel mills. We are currently constructing the iron tailings operation, which is expected to start up in the third quarter of 2012. This operation, which involves the extraction of iron ore tailings from previously developed stockpiles or water-filed tailings basins, is planned to provide iron ore tailings to be concentrated for use by Mesabi Nugget as a low-cost iron concentrate to the nugget production process.

        Steel Fabrication Operations.    Our steel fabrication operations include six New Millennium Building Systems plants, which fabricate steel joists, trusses, girders, and decking used within the non-residential construction industry. Steel fabrication operations accounted for 3%, 3%, and 4% of our consolidated net sales in 2011, 2010, and 2009 respectively.

Current Environment

        The improving domestic and global economic conditions we began to experience in 2010 continued to improve during 2011. We experienced increased order volumes and pricing in all of our operations. Specifically, we benefited from improvements in end user demand in the automotive, truck and trailer, energy, heavy equipment, agriculture, transportation, and other original equipment manufacturing industries, resulting in increases in steel mill utilization. We continue to face challenges in our structural steel and fabricated joist and decking products as the non-residential construction industry continues to experience historically low levels of demand with only modest improvement in 2011. However, we believe that we are well positioned in these operations to take advantage of these markets as they improve.

        The increased domestic steel mill utilization rates also provided greater demand for our metals recycling operations, allowing them to achieve record volumes in 2011; however, margins were somewhat compressed as competition for feedstock materials remained strong in light of continued high export levels and limited supply from a weaker domestic manufacturing base.

        Our financial strategy includes a commitment to continue to improve our financial leverage metrics and provide for long term-sustainable growth while maintaining appropriate liquidity levels. Our commitment to these goals drives a focus on controlling costs and maximizing per unit margins, managing capital investments and prudent growth. In September 2011, we entered into new five-year senior secured revolving credit facility which provides up to $1.1 billion of available borrowing, with the original option to increase that level by an additional $400.0 million, however after issuing a $275.0 million term loan in January 2012, the expansion amount is now $125.0 million. As a result of increased cash flow from operations during 2011 and our expanded revolver borrowing capability, our liquidity increased $463.5 million to almost $1.6 billion at the end of 2011. In January 2012 we executed a partial tender offer for our $700.0 million 7³/8% senior notes due November 2012 in order to mitigate a portion of the refinancing risk later in the year. Nearly 40% of the holders offered their notes in the tender, representing approximately $279.7 million. We refinanced the tender through net proceeds received from the expansion of our senior secured credit facility in the form of a more cost effective term loan of $275.0 million. The term loan has minimal amortization requirements, with a final maturity in the third quarter of 2016.

4

Competitive Strengths / Business Strategies

        We believe our financial strategy, coupled with our competitive advantages of maintaining a low, highly variable cost structure, producing a diversified value-added product offering, controlling a secure supply of recycled ferrous metals, fostering an entity-wide entrepreneurial culture and having an experienced senior management team, positions us well to continue to strengthen our leadership position during the economic recovery.

One of the Lowest Cost Steel Producers in the United States; State-of-the-Art Facilities / Continue to Maintain Low Production Costs

        We are focused on continuing to maintain and enhance one of the lowest operating cost structures in the North American steel industry. Our low operating costs are primarily a result of our efficient plant designs and operations, our high productivity rate, such as our productivity rate of approximately .3 man hours per hot band ton produced at our Flat Roll Division's mill, low ongoing maintenance cost requirements and strategic locations near our customers and sources of our primary raw material, steel scrap.

        We will continue to strive to optimize the use of our equipment, enhance our productivity and explore new technologies to further improve our unit costs of production at each of our facilities. We believe that as one of the lowest cost producers in each of our primary operating segments, we are able to better manage through cyclical and non-cyclical downturns, and to consistently maximize our profitability. We continuously seek to maximize the variability of our cost structure and to reduce per unit and fixed costs. Our incentive compensation plans at all employee levels are based on both divisional and consolidated company performance. Incentive compensation is designed to reward high productivity and efficient use of physical resources and capital employed.

Secure Supply of Ferrous Raw Materials / Develop Metals Recycling and Ferrous Resources Business Platform

        We maintain a secure supply of ferrous raw material resources through the benefit of our metals recycling operations, as well as through our current ironmaking facilities. Ferrous materials represent our single-largest component of our steel operations total manufacturing costs, excluding the Techs, representing 68% and 62% of such costs in 2011 and 2010, respectively. During 2011 and 2010, our metals recycling operations provided our steel operations with 52% and 47%, respectively, of its ferrous scrap requirements based on volume. During 2011 and 2010, we consumed 6.0 million tons and 5.2 million tons, respectively, of metallic materials in our steel making furnaces, of which iron units other than scrap represented approximately 7% and 8%, respectively. Our ironmaking operations internally supplied 87% and 79% of these iron units in 2011 and 2010, respectively through the transfer of liquid pig iron, hot briquetted iron, and iron nuggets, which are higher-quality, energy-saving ferrous raw materials.

        We expect global and domestic demand for steel products to continue to increase, and we believe there may be supply constraints of various commodities, including ferrous materials. During periods of economic downturn, significant reductions in available prime industrial scrap were a direct result of lower domestic manufacturing rates. Additionally, as consumers utilize assets for longer periods of time and replace items less frequently, the flow of other sources of scrap, such as auto bodies, appliances, and other goods, is also constrained. The world demand for domestic ferrous resources has increased in nearly every year in the past decade, impacting scrap availability as exports increase to developing countries.

        We believe our metals recycling and ferrous resources operations not only provide us with a quality, cost effective, and secure, raw material platform, but we also believe it provides us with significant revenue generating and profitability opportunities, that allow for funding of future growth, whether in resources or in other ventures. We intend to continue to participate in the development of

5

new technologies to increase the effectiveness of our metals recycling recovery capabilities and to consider new strategic relationships in order to increase the amount of unprocessed metals we have the ability to source and eventually sell.

Diversified Product Mix / Expand Product Offerings

        Our current products in our steel segment include hot rolled, cold rolled, galvanized, Galvalume® and painted sheet steel; various structural steel beams and rails; special bar quality steel; and various merchant steel products, including beams, angles, flats and channels. In addition, we offer steel finishing and fabrication services. In the metals recycling operations of our metals recycling ferrous resources segment, our products include an array of both ferrous and nonferrous scrap processing, scrap management, transportation, and brokerage products and services. Finally, our steel fabrication segment produces steel joists and steel decking materials. This diversified mix of products enables us to access a broad range of end-user markets, serve a broad customer base, and helps mitigate our market exposure to any one product or end-user market. In addition, our value-added product offerings help to balance our exposure to commodity grade products.

        We will continue to seek additional opportunities to further expand our range of products, whether through the expansion of existing facilities, greenfield projects, or acquisitions or ventures that may become available in both the domestic steel and recycling industries. Maximization of our Minnesota iron operations as well as the expansions and upgrades of existing facilities, are further important steps in pursuing our strategy of secure raw material sourcing, and product line expansion.

Strategic Geographic Locations / Enter New Geographic Markets

        The locations of our steelmaking facilities, near sources of scrap materials and near our customer base, allow us to realize freight savings for inbound scrap as well as for outbound steel products destined for our customers. Recycled steel scrap and iron units represent the most significant component of our cost of steel manufacturing. Our metals recycling facilities are located in the Upper Midwest and Southeastern United States, and thus further expand our geographic service area. We believe these regions account for a majority of the total steel scrap produced in the United States. Our coated sheet steel products are also more cost effectively available through our locations in Pittsburgh, Pennsylvania and Jeffersonville, Indiana due to river access. In October 2010, we purchased certain joist assets from another manufacturer including three plants located in Arkansas, Nevada, and northern Mexico, which along with our locations in the southeast, provides us with a national footprint allowing us to serve the entire joist and deck domestic market and national accounts.

        We may seek to enter new markets in strategic geographic locations that offer attractive growth opportunities.

Experienced Management Team and Unique Corporate Culture / Foster Entrepreneurial Culture

        Our senior management team is highly experienced and has a proven track record in the steel and metals recycling industries. Management's objectives are closely aligned with our stockholders through meaningful stock ownership positions and performance-based compensation programs that are correlated to the company's profitability. Our corporate culture is also unique for all of our operating segments. We emphasize decentralized decision-making and have established incentive compensation programs specifically designed to reward employee teams for their efforts toward enhancing productivity, improving profitability and controlling costs.

6

        We intend to continue to foster our entrepreneurial corporate culture and emphasize decentralized decision making and responsibility, while rewarding teamwork, innovation and operating efficiency. We will also continue to focus on maintaining the effectiveness of our incentive-based bonus plans that are designed to enhance overall productivity and align the interests of our management and employees with our stockholders.

2012 Outlook

        Looking ahead to 2012, we are optimistic regarding a continued slow but steady growth in the U.S. economy, which could result in increased volumes compared to 2011 for all of our operations. We believe steel consumption will continue to grow in the automotive, transportation, energy, industrial, agricultural and heavy equipment sectors. We believe residential and non-residential construction activity has likely reached its bottom and may continue to show some modest growth. The fruition of these combined factors should result in an improved operating environment for all our segments in the coming year.

        Our focus will continue to be on disciplined cost control, gross margin optimization, and prudent growth opportunities, while continuing to manage risk in an uncertain economic environment. Our current estimated 2012 cash allocation plan includes the investment of between $225.0 and $250.0 million in capital expenditures in our existing and announced operations.

Industry Segments

        We have three reporting segments: steel operations, metals recycling and ferrous resources operations, and steel fabrication operations. Please refer to Item 8. Consolidated Financial Statements and Supplementary Data for additional information.

Steel Operations

        Our steel operations segment consists of steelmaking and coating operations. The following chart summarizes the locations and the current capacities of our facilities:

Steel Production Capacity (tons)	Casting		Rolling/Billet
Sheet Products:
Flat Roll Division—Butler, Indiana		3,050,000		3,000,000
Long Products:
Structural and Rail Division—Columbia City, Indiana		2,200,000		1,800,000
Engineered Bar Products Division—Pittsboro, Indiana		750,000		625,000
Roanoke Bar Division—Roanoke, Virginia		650,000		—
Merchant Bars		—		500,000
Billets(1)		—		150,000
Steel of West Virginia—Huntington, West Virginia		280,000		320,000
		6,930,000		6,395,000

7

Steel Coating Capacity (tons)	Galvanizing		Painting
Sheet Products:
Flat Roll Division—Butler, Indiana		720,000		240,000
The Techs—Pittsburgh, Pennsylvania		1,005,000		—
Flat Roll Division—Jeffersonville, Indiana		300,000		190,000
		2,025,000		430,000

(1)

Excess billet tonnage available for sale.

        Note: Capacities represent manufacturing capabilities based on mill configuration and related employee support. These capacities do not represent expected volumes in a given year. In addition, estimates of mill capacity, particularly rolling capacity, are highly dependent on the specific product mix manufactured. Each of our mills can and do roll many different types and sizes of products; therefore, our capacity estimates assume a typical product mix.

SHEET PRODUCTS

        Our sheet steel products are produced by both our Flat Roll Division, which consists of our flat roll mill, galvanizing and painting facilities in Butler, Indiana; our galvanizing and painting facilities in Jeffersonville, Indiana; and The Techs our Pittsburgh, Pennsylvania-based galvanizing company, which operates three galvanizing facilities: GalvTech, MetalTech, and NexTech.

        Our flat roll mill manufactures flat rolled, hot rolled, cold rolled and coated steel products. We produced 2.9 million tons and 2.7 million tons at this facility in 2011 and 2010, respectively. Our products are characterized by high quality surface characteristics, precise tolerances and light gauge. In addition, this mill has achieved ISO 9001:2008—ANSI/ISO/ASQ Q9001-2008 certification. We believe that these certifications have enabled us to serve a broad range of customers who may require certifications for themselves or to satisfy the end-users of our steel products.

        Our flat roll mill has two twin-shell electric arc furnaces, which enable us to melt scrap in one vessel while tapping the other vessel and refilling it with steel scrap and iron units to make it ready for the next heat. This results in more heats and greater productivity. We have three ladle metallurgy stations, two continuous thin-slab casters which produce two-inch slabs, and two tunnel furnaces. Our hot rolling mill, which progressively reduces the slab in thickness, consists of a seven-stand rolling mill capable of rolling sheet steel down to 1.0 mm, with excellent surface quality, which enables us to access markets previously available only to more expensive cold finished material.

        Located within our flat roll mill, we have a hot rolled galvanizing line capable of coating steel in gauges from .044 to .160 inches and in widths ranging from 40 to 61 inches. Also within our flat roll mill, we have a cold rolled galvanizing line capable of coating steel in gauges from .012 to .070 inches and in widths ranging from 40 to 61 inches. Our on-site paint line receives material directly from our other processing lines and is capable of painting hot rolled galvanized coil, cold rolled coil and cold rolled galvanized coil in gauges of .012 to .070 inches and in widths ranging from 40 to 61 inches. We believe this enables us to realize substantial savings in the production of painted coil and pass along savings and efficiencies to our customers when compared to remote off-site coating facilities.

        In Jeffersonville, Indiana, we have a cold rolled galvanizing facility located within the Clark Maritime Centre on the Ohio River. This facility is capable of coating cold rolled steel in gauges from .012 to .040 inches and in widths between 40 and 61 inches. This gauge range is lighter than that available from our Butler facility and creates further expansion of our value added product offerings. Our flat roll mill provides our Jeffersonville facility with cold rolled material.

8

        The Techs facilities produced 713,000 tons and 718,000 tons in 2011 and 2010, respectively. The Techs facilities have galvanizing lines with varying capabilities. NexTech is capable of coating cold rolled steel in gauges from .007 to .020 inches and in widths between 24 and 43 inches. GalvTech is capable of coating cold rolled steel in gauges from .012 to .040 inches and in widths between 30 and 60 inches. MetalTech is capable of coating cold rolled steel in gauges from .015 to .160 inches and in widths between 24 and 52 inches. In addition to third party steel producers, our Flat Roll Division provides The Techs with required steel material. The Techs has achieved the ISO 9001:2008—ANSI/ISO/ASQ Q9001-2008 certification.

        The following table summarizes the types of sheet products we sold during the respective years.

	2011			2010
Products:
Hot rolled		29	%		28	%
Pickled and Oiled		9			8
Cold rolled		4			5
Hot rolled galvanized		16			16
Cold rolled galvanized		25			28
Galvalume®		3			3
Painted		14			12
Total		100	%		100	%

        Hot rolled Products.    Our flat roll mill produces hot rolled products that include a variety of high quality low and medium carbon and high-strength low-alloy hot rolled bands in widths from 40 to 62 inches and in thicknesses from .375 inches down to .042 inches. We also produce an array of lighter gauge hot rolled products, including high strength low alloy and medium carbon steels. These products are suitable for automobile suspension arms, frames, wheels, and other unexposed parts in auto and truck bodies; truck, trailer and recreational vehicle parts and components; mechanical and structural steel tubing; gas and fluid transmission piping, building and construction products; rail cars; ships, barges, and other marine equipment; agricultural equipment and farm implements; lawn, garden, and recreation equipment; industrial machinery and shipping containers; and highway guard rails. We believe that our basic hot rolled material has shape characteristics that exceed those of other thin-slab flat roll steel mini-mills and compares favorably with those of the integrated steel mills.

        We sell a portion of our hot rolled coils produced at our flat roll mill directly to end-users, or more often to intermediate steel processors and service centers, where they may be pickled, cold rolled, annealed, tempered, galvanized, or painted by those customers. The rest of the hot rolled coils are directed to our cold mill, where we add value to this product through our own pickling, cold rolling, annealing, tempering, galvanizing, and painting processes. A portion of our cold rolled production is shipped to our Jeffersonville, Indiana galvanizing facility.

        Cold Rolled Products.    Cold rolled steel is hot rolled steel that has been further processed through a pickler and then passed through a rolling mill until the desired gauge, or thickness, and other physical properties have been achieved. Cold rolling reduces gauge and hardens the steel and, when further processed through an annealing furnace and a temper mill, improves uniformity, ductility and formability. Cold rolling can also impart various surface finishes and textures. Cold rolled steel is used in exposed steel applications that demand higher surface quality or finish, such as exposed automobile and appliance panels. Cold rolled material is often coated or painted. As a result of higher processing costs, cold rolled prices are typically higher than hot rolled prices.

        Coated Products.    Hot rolled or cold rolled steel can be coated with zinc to render it corrosion-resistant and to improve its paintability. Galvanized, galvannealed, Galvalume®, electro-galvanized and

9

aluminized products are types of coated steels. These are also the highest value-added sheet products because they require the greatest degree of processing and tend to have the strictest quality requirements. Coated steel is used in high volume applications, such as automobiles, household appliances, roofing and siding, heating and air conditioning equipment, air ducts, switch boxes, chimney flues, awnings, garbage cans and food containers. Our paint lines in Butler and Jeffersonville incorporate state-of-the-art coil coating equipment with quick color change capability and on-line color matching which allows us to produce pre-painted steel products that are used in many of these same end products.

        We also produce hot rolled pickled and oiled, hot rolled galvanized, hot rolled galvannealed, cold rolled galvanized, cold rolled galvannealed and fully processed cold rolled sheet. As a result of our lighter gauge hot rolling capabilities, our hot rolled galvanized and galvannealed steel products are capable of replacing products that have traditionally only been available as more expensive cold rolled galvanized or cold rolled galvannealed steel. This material is typically used in transportation products, building products, such as raised garage door panels, heating and cooling products, appliances, furniture and lighting equipment.

        Customers.    Steel processors and service centers typically act as intermediaries between primary steel producers and the many end-user manufacturers that require further processing of hot rolled coils. The additional processing performed by the intermediate steel processors and service centers include pickling, galvanizing, cutting to length, slitting to size, leveling, blanking, shape correcting, edge rolling, shearing and stamping. We believe that our intermediate steel processor and service center customers will remain an integral part of our customer base. The location of our Jeffersonville facility on the Ohio River also creates opportunities for market expansion into other geographic regions. The Techs produces galvanized flat rolled products that are similar to those produced by our Flat Roll Division and sold to a similar customer base. Each of The Techs facilities specializes in the galvanizing of specific types of flat rolled steels in generally non-automotive applications, servicing a variety of customers in the heating, ventilation and air conditioning (HVAC), construction, agriculture and consumer goods markets. We exported 2% of our sheet products during both 2011 and 2010.

        During 2011, we sold our flat rolled products to approximately 400 customers. Heidtman Steel Products, Inc, which is principally owned by one of our directors, accounted for approximately 3% of our consolidated net sales in both 2011 and 2010, respectively.

        The following table summarizes the types of customers who purchased our sheet steel products during the respective years:

	2011			2010
Customers:
Service centers (including end-user intermediaries)		57	%		59	%
Construction		10			9
Heating, ventilation and air conditioning		4			5
Pipe and tube		6			5
Other original equipment manufacturers (OEM)		23			22
Total		100	%		100	%

10

        Markets.    Flat rolled products represent the largest portion of the domestic steel market. Flat rolled products consist of hot rolled, cold rolled and coated steel. The following table shows the U.S. shipments of these products, as reported by the American Iron and Steel Institute (AISI).

	Years Ended December 31,
	2011			2010			2009			2008			2007
U.S. Shipments (tons, in millions):
Hot Rolled(1)		29.6			25.5			18.1			28.1			29.1
Cold Rolled(2)		11.8			11.1			8.7			13.6			14.9
Coated(3)		19.0			17.2			12.2			18.3			22.1
Total		60.4			53.8			39.0			60.0			66.1
Sheet steel as a percentage of total U.S. steel shipments		66	%		64	%		63	%		61	%		62	%

(1)

Includes pipe/tube, sheet, strip and plate in coils.

(2)

Includes blackplate, sheet, strip and electrical.

(3)

Includes tin coated, hot dipped, galvanized, electrogalvanized and all other metallic coated.

        Competitors.    Our sheet steel-making operations compete with many North American integrated hot rolled coil producers, such as U.S. Steel (Gary, Indiana); AK Steel Corporation (Middletown, Ohio); and ArcelorMittal (Riverdale, Illinois, Cleveland, Ohio, Indiana Harbor, Indiana and Burns Harbor, Indiana). In addition, we compete with a number of mini-mills, such as Nucor Corporation (Crawfordsville, Indiana, Hickman, Arkansas, Decatur, Alabama and Berkeley, South Carolina); Gallatin Steel Company (Ghent, Kentucky); and North Star Bluescope Steel (Delta, Ohio).

        Competitors in our sheet steel-coating operations include Nucor Corporation (Crawfordsville, Indiana, Hickman, Arkansas and Berkeley, South Carolina); Sharon Coatings (Sharon, Pennsylvania); U.S. Steel (Granite City, Illinois, Pittsburgh, Pennsylvania, Fairless, Pennsylvania and Fairfield, Alabama); Wheeling Nisshin (Follansbee, West Virginia); and Severstal (Baltimore, Maryland).

LONG PRODUCTS

Structural

        Our Columbia City, Indiana mill produces structural steel beams, pilings and other steel components for the construction, transportation and industrial machinery markets, as well as standard strength and industrial quality grade rails for the railroad industry.

        We produced 876,000 tons and 635,000 tons at this facility during 2011 and 2010, respectively. Our facility melts scrap and iron units in two single-shell electric arc furnaces. Our two continuous casters are each capable of casting four strands of various sized blooms and beam blanks. Caster one casts in lengths of 17 to 48 feet and caster two in lengths of 17 to 49 feet. We can transport the cast strands directly through a reheat furnace to our original four-stand, all reversing, hot rolling mill; to our medium section rolling mill; or into a storage area for reheating and rolling in either mill at a later time. Our original hot rolling mill rolls the product into either a structural steel product or a rail product. The medium section rolling mill can produce lighter structural shapes and merchant bar. Our Columbia City, Indiana facility has achieved the ISO 9001:2008—ANSI/ISO/ASQ Q9001-2008 certification.

11

        Products.    We have the capability to produce various structural steel products such as wide flange beams, American Standard beams, miscellaneous beams, H piling material, and channel sections. The following listing shows structural steel products and their intended markets:

Structural Products	End Use
Wide flange, American Standard and miscellaneous beams	Framing and structural girders, columns, bridge stringers, ribs or stiffeners, machine bases or skids, truck parts, and construction equipment
H piling	Foundation supports
Channel sections	Diaphragms, stiffeners, ribs and components in built-up sections

        We have also initiated certain value-added services for the Midwestern fabricator market, including exact length and exact piece count capabilities.

        Customers.    The principal customers for our structural steel products are steel service centers, steel fabricators and various manufacturers. Service centers, though not the ultimate end-user, provide valuable mill distribution functions to the fabricators and manufacturers, including small quantity sales, repackaging, cutting, preliminary processing and warehousing. The majority of our structural steel products are sold to service centers. Exports accounted for 10% of our Structural and Rail Division's sales in both 2011 and 2010.

        Markets.    According to the Steel Manufacturers Association, domestic structural steel consumption in 2011, 2010, and 2009 was approximately 5.9 million tons, 5.4 million tons, and 4.4 million tons, respectively. Consumption of structural steel products is influenced both by new construction and manufacturing activity and by the selection of steel over alternative structural or manufacturing materials.

        Competitors.    Our structural steel products compete with various electric arc furnace structural steelmakers, some of which have cost structures and flexible management cultures similar to our own. Notable competitors include Nucor Corporation (Berkeley, South Carolina); Nucor-Yamato Steel (Blytheville, Arkansas); Gerdau (Midlothian, Texas and Petersburg, Virginia); and ArcelorMittal (LaPlace, Louisiana). We also believe, however, that both geography and product choice play significant roles. There are currently no other structural mills located in the Midwest, one of the largest structural steel consuming regions in the United States, and we believe we provide customer service benefits to service centers, fabricators and manufacturers located in the region. We also believe that most of Canada's structural steel consumption is located in Canada's eastern provinces, closer to us than to either of our two largest competitors. Moreover, we provide a broad product mix, focusing on the mid-range and larger section served only by Nucor-Yamato Steel and Gerdau from locations more remote than our facility.

Rail Products

        Our Columbia City, Indiana mill is designed to produce standard strength rails for the railroad industry. We produced and shipped approximately 117,000 tons and 55,000 tons of rail during 2011 and 2010, respectively, and plan to further grow this business in 2012. In addition, our rail-welding facility has the ability to weld longer length rails to lengths up to 1,700 feet. Such long strings offer substantial savings to the railroads both in terms of initial capital cost and through reduced maintenance. In contrast, current production of rail in the United States, and available imported rail, is limited to a maximum of 80-foot lengths, as a result of existing plant layout restrictions and the physical limitations of ocean freight.

12

        Products.    We are currently capable of manufacturing standard rail grades in weights of 115 lbs. per yard, 136 lbs. per yard, and 141 lbs. per yard, in 240 feet rail lengths, which no one else presently produces in or imports into the United States or Canadian rail markets.

        Customers.    The marketplace for steel rails in the United States and Canada is specialized, with approximately eight major railroad purchasers in the United States: Amtrak, Burlington Northern Santa Fe, Union Pacific, Canadian Pacific Railway, Norfolk Southern, CSX Transportation, Kansas City Southern Rail Network, and Canadian National Railway. Standard Strength rail produced at our Columbia City, Indiana, mill has been tested and approved by Burlington Northern Santa Fe, Union Pacific, Norfolk Southern, CSX Transportation, and Amtrak.

        Markets.    According to AISI data, domestic rail shipments averaged approximately 1 million tons annually over the 2009 to 2011 period, including standard rail and premium or head-hardened rail. Of the total shipments of rail during 2010, approximately 70% was produced domestically and approximately 30% was imported, mainly from Japan and Europe. There are currently no rail producers in Canada.

        Competitors.    At present, the rail market is principally served by two producers: Rocky Mountain Steel (Pueblo, Colorado), a division of Evraz Oregon Steel Mills, Inc., and ArcelorMittal (Steelton, Pennsylvania). Each of these producers has the capability to produce either standard or premium rail, although neither is currently equipped to produce rail in 240-foot lengths, or weld rail into longer sections. Global competitors include high quality integrated and electric furnace steel producers in Europe and Asia, including Voest-Alpine, Nippon Steel, NKK, Tata, Moravia Steel, and Lucchini, SPA.

Engineered Bar Products

        Our engineered bar mill located in Pittsboro, Indiana is capable of producing a broad array of engineered special bar quality (SBQ), merchant bar quality (MBQ), and reinforcing bar products. The mill consists of a 100-ton single-shell AC furnace, a three-strand continuous caster currently capable of casting both a 7"×7" billet and a 14"×10" bloom, a reheat furnace, and a rolling mill consisting of a roughing mill and intermediate mill, as well as reducing and sizing blocks used in the production of SBQ rounds. We produced 638,000 tons and 585,000 tons during 2011 and 2010, respectively, at this facility. We generally employ this facility primarily for the manufacture of SBQ products.

        Adjacent to our engineered bar mill, we have a finishing facility which provides various downstream finishing operations for our SBQ steel bars. Currently, the facility has an estimated annual processing capacity of 190,000 tons. Processing operations include turning, polishing, straightening, chamfering, precision saw-cutting and heat-treating capabilities. In addition, non-destructive testing services are available, including eddy current, flux leakage and ultrasonic inspection. The additional processing capabilities provide essential processes and services that have been requested by our growing SBQ customer base. Additionally, our facility has achieved the ISO 9001:2008—ANSI/ISO/ASQ Q9001-2008 certification.

        Products.    We are capable of producing a broad line of engineered SBQ products. SBQ products are uniquely designed for applications ranging from gears and shafts to mining equipment and oil patch tubing. We can produce SBQ rounds in sizes from 1.5 to 9 inches and SBQ round cornered squares in sizes from 2 to 8 inches. Approximately 30% of our products produced had additional processing completed in our bar finishing facility in 2011 and 2010.

        Customers.    SBQ products are principally consumed by cold finishers, forgers, intermediate processors, OEM manufacturers, steel service centers, and distributors. Major customers include Caterpillar, One Steel Grinding, and Michigan Seamless Tube. Export sales accounted for 3% and 1% of our Engineered Bar Product Division's sales in 2011 and 2010.

13

        Markets.    According to AISI data, domestic apparent hot rolled bar steel demand has averaged approximately 4.3 million tons annually over the 2009 to 2011 period. According to the AISI, apparent demand of light structural shapes, also characterized by a major dimension of less than 3 inches, averaged between 1 million and 2 million tons annually during the 2009 to 2011 period. These amounts include both SBQ and merchant bar products.

        Competitors.    Our major competitors for SBQ products include Republic Engineered Products (Akron, Ohio); The Timken Company (Canton, Ohio); and Gerdau (Jackson, Michigan and Monroe, Michigan).

Merchant Bar Products

        Our primary merchant bar producing facility is our Roanoke, Virginia mill. Originally constructed in the mid-1950's this mini-mill has gone through several major upgrades and expansions. Currently, the mill consists of a primary 100-ton electric arc furnace, a ladle metallurgy furnace, a five-strand continuous caster capable of casting up to 6 inch square billets, a reheat furnace, and a rolling mill with automatic in-line straightening, shearing and bundling capabilities. Additionally, the Roanoke facility has achieved the ISO 9001:2008 certification.

        During 2011 and 2010, Roanoke produced 590,000 tons and 531,000 tons of billets respectively, and 454,000 tons and 391,000 tons of finished steel products, respectively. The excess steel billet production is sold to mills without sufficient melting capacities, including some of our own mills, such as our Steel of West Virginia facility. In addition, our steel fabrication operations also purchase angles from our Roanoke facility.

        Products.    We are capable of producing a broad line of merchant steel products consisting of angles, plain rounds, flats, channels, and reinforcing bars of various lengths and sizes. We also produce various sizes and grades of billets.

        Customers.    These merchant bar products are sold primarily to steel service centers as well as rebar distributors, joist producers, and OEMs, while billets are sold to other steel mills, including our Steel of West Virginia mill. Roanoke exported less than 1% of its tons in 2011 and did not export any products during 2010.

        Markets.    The apparent domestic hot rolled bar and reinforcing bar combined demand averaged approximately 10 million tons annually over the 2009 to 2011 period according to AISI data. In addition the AISI apparent domestic demand of bar-sized light shapes averaged between 1 million and 2 million tons annually during the 2009 to 2011 period. These amounts include both SBQ and merchant bar products.

        Competitors.    Our major competitors for merchant bar products are Nucor Corporation (Darlington, South Carolina, Auburn, New York, Birmingham, Alabama, Jackson, Mississippi, Kankakee, Illinois and Marion, Ohio); Commercial Metals Company (Cayce, South Carolina and Birmingham, Alabama); and Gerdau (Charlotte, North Carolina, Cambridge, Ontario, Whitby, Ontario, Cartersville, Georgia, Jacksonville, Florida, Joliet, Illinois, Knoxville, Tennessee, Sayerville, New Jersey and Jackson, Tennessee).

Specialty Shapes

        Our Steel of West Virginia mill consists of two 70-ton electric arc furnaces, a three strand continuous caster capable of casting squares from 4 × 4 inches to 8 × 8 inches and rectangles from 5 ×4 inches to 4 × 9.75 inches, two rolling mills and various types of fabrication equipment. Unlike most other mills, Steel of West Virginia frequently performs finishing operations on its products, such as cutting to length, additional straightening, hole punching, shot blasting, welding and coating.

14

Through this additional finishing, we create custom finished products that are generally placed directly into our customers' assembly operations. Steel of West Virginia has fabrication facilities in Huntington, West Virginia and Memphis, Tennessee. We produced 269,000 tons and 237,000 tons of various merchant and structural steel products at this facility during 2011 and 2010, respectively. Additionally, Steel of West Virginia has achieved the ISO 9001:2008 certification.

        Products.    We produce or fabricate specialty steel sections and custom-finished products, which are placed directly into customers' assembly lines. Our flexible manufacturing capabilities enable us to meet demand for a variety of custom-ordered and designed products. Many of these products are produced in small quantities for low volume end uses.

        Customers.    Our customers are primarily OEMs producing truck trailers, industrial lift trucks, merchant products, guardrail posts, manufactured housing, mining, and off-highway construction equipment. While we have a wide variety of customers, the largest are in the truck trailer and industrial lift truck industries.

        Markets.    Steel of West Virginia operations generally sell into smaller niche markets. During 2011 and 2010, Steel of West Virginia exported 7% and 6% of its sales.

        Competitors.    Our industrial truck products compete with European operations, such as Mannstaedt (Germany); Corus (Skinnegrove, England); and Hoesch (Germany). Our major truck trailer beam competitor is a division of Gerdau (Manitoba, Canada and Memphis, Tennessee). Our other product offerings compete on a national basis with Nucor (Berkeley, South Carolina and Darlington, South Carolina) and Gerdau (Cartersville, Georgia).

Metals Recycling and Ferrous Resources Operations

METALS RECYCLING

        Our metals recycling operations include both ferrous and nonferrous scrap metal processing, transportation, marketing, brokerage, and consulting services in over 70 locations primarily in the Midwest and Southeast portion of the United States. In addition, OmniSource designs, installs and manages customized scrap management programs for industrial manufacturing companies at more than 300 locations throughout North America. Our steel mills utilize a portion of the steel scrap processed through OmniSource as raw material in our steelmaking operations, and the remainder is sold to other consumers, such as other steel manufacturers and foundries. In 2011, 2010, and 2009, OmniSource supplied our steel mills with approximately 52%, 47%, and 47%, respectively, of the tons of their ferrous raw material requirements, representing approximately 43%, 42%, and 39%, respectively, of OmniSource's 2011, 2010, and 2009 ferrous shipped tons.

        Our metals recycling operations processed and/or brokered approximately 5.9 million gross tons and 5.2 million gross tons of ferrous material during 2011 and 2010, respectively. OmniSource also processed and brokered approximately 1.1 billion and 961 million pounds pounds of nonferrous material during 2011 and 2010, respectively. OmniSource's revenues by major scrap category in 2010 were 64% ferrous and 36% nonferrous (including stainless) in 2011 as compared to approximately 62% ferrous and 38% nonferrous in 2010. During both 2011 and 2010, approximately 11% of OmniSource's revenues were from export sales primarily from nonferrous materials.

        We sell various grades of ferrous scrap metals to steel mills and foundries, and we sell various grades of nonferrous metals such as copper, brass, aluminum and stainless steel. We generally sell these nonferrous materials to aluminum sheet and ingot manufacturers, brass and bronze ingot makers, copper refineries and mills, smelters, specialty mills, alloy manufacturers and other consumers. Ferrous scrap metal is the primary raw material for electric arc furnaces such as those operated by our steel

15

mills. We purchase ferrous and nonferrous scrap metals, processed and unprocessed, in a variety of forms for our metals recycling facilities.

        Ferrous scrap comes from two primary sources: (i) manufacturers and industrial plants, metal fabrication plants, machine shops and factories which generate steel scrap referred to as prompt or industrial scrap, and (ii) scrap dealers, retail individuals, auto wreckers, demolition firms and others who generate steel and iron scrap referred to as "obsolete" scrap. Market demand and the composition, quality, size, weight and location of the materials are the primary factors that determine prices. We purchase nonferrous scrap from three primary sources: (i) manufacturers and other nonferrous scrap sources which generate or sell scrap aluminum, copper, stainless steel and other nonferrous metals; (ii) producers of electricity, telecommunication service providers, aerospace, defense and recycling companies that generate nonferrous scrap consisting primarily of copper wire, aluminum beverage cans and various other metals and alloys; and (iii) retail individuals who deliver directly to our facilities material which they collect from a variety of sources. During 2011, the company expanded its number of retail yards in strategic locations to increase cost-effective scrap sourcing. Additional retail yard expansion is planned for 2012. We also collect ferrous and nonferrous scrap from sources other than those that are delivered directly to our processing facilities by placing retrieval containers near these sources. The containers are subsequently transported to our processing facilities.

        Our metals recycling facilities consist of offices, warehouse buildings and open-air collection and processing facilities of various sizes and acreages, equipped with specialized equipment for processing both ferrous and nonferrous metal where we receive, sort, process and store the metals. We equip our facilities with scales, shears, baling presses, briquetting machines, conveyors and magnetic separators, which enable us to efficiently process large volumes of scrap metals. To facilitate processing, shipping and receiving, we equip our ferrous metal processing centers with presses, shredders or hydraulic shears to prepare and compress scrap metal for easier handling. Cranes are utilized to handle scrap metals for processing and to load material for shipment. Many of our facilities have rail access as ferrous scrap is primarily shipped by open gondola railcar. Additionally, several of the metals recycling divisions have achieved certifications, including ISO 9001:2008 and ISO 14001:2004 certification. We continue to make improvements such as our successful installation and commissioning at three locations of the Gamma Tech analyzer which allows for a more precise measure of copper content in scrap metal. These additions have benefited our steel mills by providing a known, low-copper scrap source while providing OmniSource a competitive product advantage to other customers. During 2012 we also plan to add enhanced downstream separation technology at two of our locations, to further enhance the recovery of nonferrous materials from residual shredded material and decrease landfill costs.

        Products.    Our metals recycling operations primarily involve the purchase, processing and resale of ferrous and nonferrous scrap metals into reusable forms and grades.

        We process an array of ferrous products used in foundry and steel mill applications for use in our own steel mills or for resale to other customers through a variety of methods, including sorting, shearing, cutting, torching, baling, shredding, briquetting and breaking. Our major ferrous products include heavy melting steel, busheling, bundled scrap, shredded scrap and other scrap metal products such as steel turnings and cast iron. These products vary in properties or attributes related to cleanness, size of individual pieces and residual alloys. These factors are determined by the specific needs and requirements of the consumer and affect the individual product's relative value. We process nonferrous products, including aluminum, brass, copper, stainless steel and other nonferrous metals for use in foundry, mill refining, and smelting applications. Our Superior Aluminum Alloys operations produce specification aluminum alloys in the form of ingots, sows and molten metal. In addition, we provide transportation logistics (truck, rail, and river barge), management services, marketing, brokerage, and consulting services related to the scrap industry.

16

        Customers.    We sell processed ferrous scrap to end-users such as steel producing mini-mills, integrated steelmakers, foundries, secondary smelters and metal brokers, who aggregate materials for other large users. Most of our ferrous-scrap customers purchase processed scrap through negotiated spot sales contracts which establish a quantity purchase for the month. The price we charge for ferrous scrap depends upon market demand and transportation costs, as well as, the quality and grade of the scrap. In many cases, our selling price also includes the cost of transportation to the end-user.

        We sell processed nonferrous scrap to end-users such as specialty steelmakers, foundries, aluminum sheet and ingot manufacturers, copper refineries and smelters, brass and bronze ingot manufacturers, wire and cable producers, utilities and telephone networks.

        Markets.    According to the Institute of Scrap Recycling Industries (ISRI), approximately 74 million metric tons and 70 million metric tons of recycled iron and steel (including stainless and alloys) were processed in the United States during 2010 and 2009, respectively. In addition, approximately 8 million metric tons of nonferrous scrap (including aluminum, copper, lead, and zinc) were processed during both 2010 and 2009. Scrap is a global commodity influenced by conditions in a number of industrialized and emerging-markets throughout Asia, Europe and North America. ISRI estimates that approximately 20 million metric tons and 21 million metric tons of ferrous scrap were exported from the United States in 2010 and 2009, respectively. Nonferrous exports from the United States were estimated by ISRI to be 3.0 million metric tons and 2.7 million metric tons in 2010 and 2009, respectively.

        Scrap metal supplies are generated from a variety of sources. Industrial scrap or home scrap is generated from steel processing and manufacturing facilities utilizing steel in their production process. Obsolete scrap including post consumer waste, demolition of steel structures and automobiles represent a significant source of scrap generation. We do not purchase a material amount of scrap metal from a single source or from a limited number of major sources.

        Competitors.    The markets for scrap metals are highly competitive, both in the purchase of raw scrap and the sale of processed scrap. With regard to the purchase of raw scrap, we compete with numerous independent recyclers, as well as smaller scrap companies engaged only in collecting industrial scrap. In many cases we also purchase unprocessed scrap metal from smaller scrap dealers and other processors. Successful procurement of materials is determined primarily by the price offered by the purchaser for the raw scrap and the proximity of our processing facility to the source of the raw scrap. Both ferrous and nonferrous scrap sells as a commodity in both national and international markets, which are affected by relative economic conditions, currency fluctuations and the availability and cost of transportation. Competition for sales of processed scrap is based primarily on the price, quality and location of the scrap metals, as well as the level of service provided in terms of reliability and timing of delivery.

        We also face potential competition for sales of processed scrap from other producers of steel products, such as integrated steel mills and steel mini-mills, some of which are vertically integrated in the scrap metals recycling business, as a number of steel manufacturers currently operate their own scrap yards. In addition, other steel mills may compete with us in attempting to secure scrap supply through direct purchasing from our scrap suppliers. Scrap metal processors also face competition from substitutes for prepared ferrous scrap, such as pre-reduced iron pellets, hot briquetted iron, pig iron, iron carbide and other forms of processed iron. The availability and relative prices of substitutes for ferrous scrap could result in a decreased demand for processed ferrous scrap and could result in lower prices and/or lower demand for our scrap products.

        The industry is highly fragmented with many smaller family-owned companies, although OmniSource also competes with a number of national and global companies, each of which has multiple locations in areas in which OmniSource also operates. These larger entities include The David J. Joseph Company (a subsidiary of Nucor Corporation), Sims Metal Management, Ferrous

17

Processing and Trading Co., Aleris International, CMC, a division of Commercial Metals Company, and Schnitzer Steel. In addition, OmniSource competes with many regional scrap companies. No single scrap metals recycler has a significant market share in the domestic market.

FERROUS RESOURCES

Iron Dynamics

        Iron Dynamics developed a process of producing liquid pig iron and hot briquetted iron (HBI) that serves as a substitute for a portion of the metallic raw material mix that goes into our electric arc furnaces to produce steel. Direct reduced iron (DRI) is a metallic product made from millscale and iron ore "fines" that has been reduced in a rotary hearth furnace, using natural gas and coal. The reduction method employed by Iron Dynamics uses coal as the reducing agent. The DRI is either compacted by briquetters to form HBI, or is processed further to produce liquid pig iron. HBI can be immediately used in our melting furnaces or stockpiled for later use. Liquid pig iron is tapped from Iron Dynamics' submerged arc furnace and immediately transferred in ladles to the flat roll mill's melt shop, where it is combined with scrap steel in the mill's electric arc furnaces.

        The plant's primary focus is to maximize liquid pig iron production, due to the inherent economic benefits achieved when the material is used in the steelmaking process, such as reduced energy cost, reduced materials cost and quicker melting cycles. During 2011 and 2010 respectively, Iron Dynamics produced 230,000 and 226,000 metric tons, of which 198,000 metric tons, or 86%, and 180,000 metric tons, or 80%, was liquid pig iron. We have used and plan to use all of the facility's output in our Flat Roll steelmaking operations.

Minnesota Iron Operations—Mesabi Nugget, Mesabi Mining, and Mining Resources.

        Our Minnesota iron operations consists of: Mesabi Nugget, our ironmaking project at Hoyt Lakes, Minnesota (81% owned by us); our nearby planned iron mining operation which is currently in the permitting process, Mesabi Mining; and, our planned iron tailings operations, Mining Resources (80% owned by us.) Mesabi Nugget is the world's first commercial ironmaking facility to use the ITmk3® process, an iron-nugget production technology pioneered by Kobe Steel, Ltd., which Kobe Steel is licensing to the venture. The construction of the Mesabi Nugget facility was completed in 2009, and initial production of iron nuggets commenced January 2010. Throughout 2010 and 2011, we have refined this pioneering production process and changed equipment configurations to increase production and plant availability. The facility's anticipated annual production capacity is 500,000 metric tons. In 2011 and 2010, Mesabi Nugget produced 156,000 and 75,000 metric tons of iron-nuggets, respectively, for use by our own steel mills. We are currently constructing the iron tailings operation, which is expected to start up in the third quarter 2012. This operation, which involves the extraction of iron ore tailings from previously developed stockpiles or water-filed tailings basins, is planned to provide iron ore tailings to be concentrated for use by Mesabi Nugget as a low-cost iron concentrate to the nugget production process.

Sources, Availability and Cost of Steel and Other Operations' Raw Materials.

        Scrap Metals.    Our principal raw material of our steel operations segment is scrap metal derived from, among other sources "home scrap," generated internally at steel mills themselves; industrial scrap, generated as a by-product of manufacturing; and "obsolete" scrap recycled from end-of-life automobiles, appliances, railroad cars and railroad track materials, agricultural machinery and demolition scrap from obsolete structures, containers and machines.

        Scrap typically comprises more than 80% of the metallic melt mix in electric arc furnace steelmaking, in contrast to integrated mill steelmaking, where the proportion of scrap has traditionally been approximately 25% to 35%. Depending upon the scrap substitute material that may be available

18

from time to time, and the relative cost of such material, the percentage of scrap used in our steelmaking operations could be reduced in our metallic melt mix.

        Many variables can impact scrap prices, all of which reflect the pushes and pulls of the supply demand equation. These factors include the level of U.S. new steel production (for high-quality, low-residual scrap is a by-product of new steel manufacturing activity), the level of exports of scrap from the United States, the amount of obsolete scrap production and the effect of speculation on the amount of scrap offered on the market from time to time. Generally, as domestic steel demand increases, so does scrap demand and resulting scrap prices. The reverse is also normally, but not always, true with scrap prices following steel prices downward when supply exceeds demand.

        The following table provides pricing per gross ton from American Metal Market and Iron Age (Pig Iron) estimates for ferrous materials used in steel production:

        The price of steel scrap, as a commodity, has tended to be volatile, rising and falling with supply and demand and not always in lock step with or in proportion to the market price of new steel. When scrap costs greatly accelerate, this threatens one of the principal elements of a mini-mill's traditional lower cost structure—the cost of its metallic raw material. Therefore, having a lower cost alternative source of iron for a portion of a mini-mill's melt mix, if realizable, would partially buffer the effects of high scrap prices and scrap price volatility. With the growing proportion of electric furnace steelmaking, both worldwide and domestically, we believe that the benefit of developing a cost-effective alternate iron source to augment scrap, our primary raw material, makes good economic sense in the long run.

        Iron Units.    In addition to scrap, direct reduced iron, hot briquetted iron, pig iron, and iron-nuggets are used in electric furnace mini-mill steel production. During 2011 and 2010, we consumed 6.0 million tons and 5.2 million tons respectively of metallic materials in our steel making furnaces, of which iron units other than scrap represented approximately 7% and 8% of the tons,

19

respectively. Of these iron substitute units consumed, our Iron Dynamics and Mesabi Nugget operations together supplied 87% and 79% of these iron units in 2011 and 2010, respectively.

        Iron Concentrate and Coal.    At our Mesabi Nugget operations, iron concentrate and coal represent a significant portion of the total necessary input to and thus cost of iron nugget production. We currently are able to obtain all our iron needs from reliable external sources. Iron concentrate is generally priced quarterly with the price driven largely by a small number of suppliers and the global market for iron. Iron concentrate costs are therefore currently outside our control and may change independent of both scrap costs, and ultimately the costs we can charge for our steel products. Development of our own more stable low-cost iron sources, like Mining Resources and Mesabi Mining, will therefore be a very meaningful step in securing a more stable supply of lower cost iron units. Coal pricing is typically set annually, and although supply is generally sufficient as there are ample reliable sources domestically, unexpected mine outages can interrupt availability and potentially increase our costs. Given the annual pricing and the potential supply interruptions, the cost of coal may not correlate with the ever changing environment of scrap and steel pricing.

Steel Fabrication Operations

        Our steel fabrication operations primarily serve the non-residential construction industry. In October 2010, we purchased certain joist assets from another manufacturer, including three plants located in Hope, Arkansas; Fallon, Nevada; and Juarez, Mexico. These new facilities when combined with our existing facilities operating in Indiana, Florida and Virginia give us a national footprint that allow us to service the entire U.S. construction market, as well as national accounts such as large retail chains.

        We fabricate trusses, girders, steel joists and steel decking. These products are sold to the non-residential building components market. Total production of all products was 218,000 tons and 164,000 tons during 2011 and 2010, respectively. Our Flat Roll Division and Roanoke Bar Division supply a substantial portion of the steel utilized in these manufacturing operations.

        Products.    Our fabrication operations produce steel building components, including steel joists, girders, and trusses. Our individual joist products include bowstring, arched, scissor, double-pitched and single-pitched joists. Our Indiana, Florida and Virginia plants also produce a full range of steel roof, form, and composite floor decking.

        Customers.    Our fabrication primary customers are non-residential steel fabricators. Other customers include metal building companies, general construction contractors, developers, brokers and governmental entities. Our customers are located throughout the United States with a concentration in the eastern half of the country. Through our new locations at Arkansas, Nevada, and Juarez, Mexico we are facilitating the expansion of our fabrication operations' to U.S. construction markets in the Southwest and the West, and national accounts.

        Markets.    Our fabrication operations primarily serve the non-residential construction industry. The recent downturn and slow recovery in the non-residential construction markets has resulted in demand for joist and deck products to decrease from previous levels seen in 2008 and prior. The steel joist and deck market in the United States was approximately 1.0 million tons in 2010 and 2009, and has rebounded slightly to 1.2 million tons in 2011, based on trade association estimates. However, we believe the long-term prospects for this business are sound. Because of the current market conditions, we believe the ramp up of the recently acquired locations will continue to proceed slowly as the market strengthens.

        Competitors.    Our main competitors in the joist business are Vulcraft, a division of Nucor Corporation; Canam Group; Quincy Joist Co.; Joist Structural; and Valley Joist. In the steel decking business, New Millennium's main competitors are Vulcraft; Wheeling Corrugating Co.; Quincy Joist Co.; Consolidated Systems, Inc.; and Canam Group.

20

Energy Resources

        Electricity.    Electricity is a significant input required in the electric arc furnaces in our steelmaking operations (excluding The Techs), representing 5% of steel production costs of goods sold in 2011 and 2010. We have entered into a fixed price interruptible electricity supply agreement that extends through December 31, 2012, for our Flat Roll Division in Butler, Indiana. The contract allows our supplier to interrupt service in the event of an emergency or in response to various market conditions. During 2012, we will be working with the electric company to create a similar agreement for beyond 2012, and do not believe this will materially change our operations in future years. Our Structural and Rail Division and Roanoke Bar Division purchase electricity at current market prices. Steel of West Virginia had negotiated fixed prices through 2011 and the Techs have negotiated fixed prices through 2012. Our Engineered Bar Products Division has a combination of fixed pricing and market pricing for the various components of the electrical services (demand charge, energy charge, riders, etc.).

        Gas.    We purchase a portion of our steel operations' natural gas requirements at market prices and a portion by entering into hedging transactions on the futures markets for ultimate physical delivery in order to help minimize price volatility. These contracts typically have duration of up to 24 months. Natural gas represented 2% of steel operations (other than The Techs) costs of goods sold in 2011 and 2010.

Patents and Trademarks

        We currently do not own any material patents or patent applications for technologies that are in use in our production processes. We have seven major registered trademarks, as follows:

•

the mark "SDI" and a chevron alone;

•

the mark "SDI" and a chevron and "Steel Dynamics, Inc." to the right of the chevron;

•

the mark "SDI" and a chevron and "Steel Dynamics" to the right of the chevron;

•

the mark "OmniSource Corporation" with the circle logo design;

•

the slogan "The Best in Metals Recycling";

•

the mark "The Techs"; and

•

the mark "New Millennium Building Systems, LLC".

Research and Development

        Our research and development efforts have consisted of efforts to develop or improve our operating practices, and our efforts to develop and improve alternative ironmaking technologies through Iron Dynamics and our investment in Mesabi Nugget. With the exception of Mesabi Nugget, most of these research and development efforts have been conducted in-house by our employees. We have joined with Kobe Steel, LTD in the development and commercialization of ITMK3® iron nugget production process technology being utilized at our Mesabi Nugget project.

Environmental Matters

        Our steel operations, metals recycling and ferrous resources operations, and steel fabrication operations are subject to substantial and evolving local, state and federal environmental, health and safety laws and regulations concerning, among other things, emissions to the air, discharges to surface and ground water and to sewer systems, and the generation, handling, storage, transportation, treatment and disposal of toxic and hazardous substances. Our manufacturing operations are dependent upon both state and federal permits regulating discharges into the air or into the water in order to operate our facilities. We believe that in all current respects our steel operations, metals recycling and

21

ferrous resources operations, and steel fabrication operations are in material compliance with all provisions of federal and state laws concerning the environment and we do not currently believe that future compliance with such provisions will have a material adverse effect on our results of operations, cash flows or financial condition.

        Since the level of enforcement of environmental laws and regulations, or the nature of those laws that may be enacted from time to time are sometimes subject to changing social or political pressures, our environmental capital expenditures and costs for environmental compliance may increase in the future. In addition, due to the possibility of unanticipated regulatory or other developments, the amount and timing of future environmental expenditures may vary substantially from those currently anticipated. The cost of current and future environmental compliance may also place U.S. steel producers at a competitive disadvantage with respect to foreign steel producers, which may not be required to undertake equivalent costs in their operations.

        Pursuant to the Resource Conservation and Recovery Act, or RCRA, which governs the treatment, handling and disposal of solid and hazardous wastes, the United States Environmental Protection Agency, or U.S. EPA, and authorized state environmental agencies conduct inspections of RCRA regulated facilities to identify areas where there may have been releases of solid or hazardous constituents into the environment and require the facilities to take corrective action to remediate any such releases. RCRA also allows citizens to bring certain suits against regulated facilities for potential damages and clean up. Our steelmaking facilities are subject to RCRA. Our manufacturing operations produce various by-products, some of which, for example, electric arc furnace or EAF dust, are categorized as industrial or hazardous waste, requiring special handling for disposal or for the recovery of metallics. We collect such co-products in approved baghouses and other facilities, but we are also examining alternative reclamation technologies to recycle some of these products. While we cannot predict the future actions of the regulators or other interested parties, the potential exists for required corrective action at these facilities, the costs of which could be substantial.

        Under the Comprehensive Environmental Response, Compensation and Liability Act, or CERCLA, the U.S. EPA and, in some instances, private parties have the authority to impose joint and several liability for the remediation of contaminated properties upon generators of waste, current and former site owners and operators, transporters and other potentially responsible parties, regardless of fault or the legality of the original disposal activity. Many states, including Indiana, have statutes and regulatory authorities similar to CERCLA and to the U.S. EPA. We have a number of waste handling agreements with various contractors to properly dispose of our electric arc furnace dust and certain other waste products of steelmaking. However, we cannot assure you that, even if there has been no fault by us, we may not still be cited as a waste generator by reason of an environmental clean up at a site to which our waste products were transported.

        In addition to RCRA and CERCLA, there are a number of other environmental, health and safety laws and regulations that apply to our facilities and may affect our operations. By way of example and not of limitation, certain portions of the federal Clean Air Act, Clean Water Act, Toxic Substances Control Act, Oil Pollution Act, Safe Drinking Water Act and Emergency Planning and Community Right-to-Know Act, as well as state and local laws and regulations implemented by the regulatory agencies, apply to our facilities' operations. Many of these laws allow both the governments and citizens to bring certain suits against regulated facilities for alleged environmental violations. Finally, any steelmaking and metals recycling company could be subject to certain toxic tort suits brought by citizens or other third parties alleging causes of action such as nuisance, negligence, trespass, infliction of emotional distress, or other claims alleging personal injury or property damage.

22

Employees

        Our work force consisted of approximately 6,530 full time employees at December 31, 2011, of which approximately 11% were represented by collective bargaining agreements. The largest group of unionized employees is at Steel of West Virginia. The remaining unionized employees are located in five different OmniSource metals recycling locations, each of which has its own agreement. We believe that our relationship with our employees is good.

Operation	Covered Employees		Expiration Date
Steel of West Virginia		401	June 20, 2014
OmniSource		37	April 30, 2012
		35	September 15, 2012
		120	October 20, 2013
		65	May 31, 2014
		77	September 30, 2017

Available Information

        Our internet website address is http://www.steeldynamics.com. We make available on our internet website, under "Investor Center," free of charge, as soon as reasonably practicable after such materials are electronically filed with, or furnished to, the SEC, our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and amendments to those reports, as well as press releases, ownership reports pursuant to Section 16(a) of the Securities Act of 1933, our Code of Ethics for Principal Executive Officers and Senior Executive Officers and any amendments thereto to or waivers thereof, as well as our Audit, Compensation and Nominating and Corporate Governance Committee charters. We do not intend to incorporate the contents of our or any other website into this report.

ITEM 1A.    RISK FACTORS

Many factors could have an effect on our financial condition, cash flows and results of operations. We are subject to various risks resulting from changing economic, environmental, political, industry, business and financial conditions. The factors described below represent our principal risks.

Risks Related to our Industry

Our industry is affected by domestic and global economic factors including the risk of a recurrent recession.

        Our financial results are substantially dependent not only upon overall economic conditions in the United States, in Europe and in Asia, but also as they may affect one or more of the industries upon which we depend for the sale of our products. A recurrent recession in the United States, or globally, could substantially decrease the demand for our products and adversely affect our business. Moreover many of our products are commodities, subject to their own cyclical fluctuations in supply and demand in both metal consuming and metal generating industries, including the construction industry. Metals industries have historically been vulnerable to significant declines in consumption and product pricing during prolonged periods of economic downturn such as during late 2008 and 2009, before beginning to rebound in 2010 and 2011. Likewise, the pace of domestic non-residential construction activity has historically slowed significantly during economic downturns and has been at historically low levels in recent years.

        Our business is also dependent upon certain industries, such as commercial and government construction, energy, metals service centers, automotive, agriculture, transportation, petrochemical and original equipment manufacturing, and these are also cyclical in nature. Therefore, these industries may

23

experience their own significant fluctuations in demand for our products based on such things as economic conditions, energy prices, consumer demand and infrastructure funding decisions by governments. Many of these factors are beyond our control. As a result of the volatility in the industries we serve, we may have difficulty increasing or maintaining our level of sales or profitability. If the industries we serve were to suffer a downturn, then our business may be further adversely affected.

Our level of production and our sales and earnings are subject to significant fluctuations as a result of the cyclical nature of the steel industry and some of the industries we serve.

        The steel manufacturing business is cyclical in nature, and the price of the steel we make may fluctuate significantly due to many factors beyond our control. The timing and magnitude of these price fluctuations are difficult to predict. The sale of our manufactured steel products is directly affected by demand for our products in other cyclical industries, such as the automotive, oil and gas, gas transmission, residential and commercial/industrial construction, commercial equipment, rail transportation, appliance, agricultural and durable goods industries. While the domestic automotive industry, which is a major consumer of new steel and a major generator of steel scrap, has shown recent signs of improvement, it has not yet fully recovered from the unprecedented downturn in demand of a couple of years ago. Economic difficulties, stagnant economies, supply/demand imbalances and currency fluctuations in the United States or globally could further decrease the demand for our products or increase the amount of imports of steel into the United States, which could decrease our sales, margins and profitability.

The scrap metal recycling industry has historically been, and is expected to remain, highly cyclical. A prolonged period of low scrap prices or a fall in scrap metal prices, could result in the weakening of inbound scrap flows and thereby reduced our ability to obtain, process and sell recycled materials and this could have a material adverse effect on our metals recycling operations' results.

        Scrap metal prices are volatile and operating results within the metals recycling industry, in general, have historically been cyclical, and are expected to remain, highly cyclical in nature. Similarly, but not necessarily paralleling the price fluctuations in the steel business, the purchase prices for automobile bodies and various other grades of obsolete and industrial scrap, as well as the selling prices for processed and recycled scrap metals we utilize in our own manufacturing process or we resell to others through our metals recycling operations, are also highly volatile. As a metals recycler, we may attempt to respond to changing recycled metal selling prices by adjusting the scrap metal purchase prices we pay to others, but our ability to do this may be limited by competitive or other factors during periods of low scrap prices, when inbound scrap flow may slow considerably, as scrap generators hold onto their scrap in the hope of getting higher prices later; conversely, increased foreign demand for scrap due to economic expansion in countries such as China, India, Brazil, and Turkey can result in an outflow of available domestic scrap as well as higher scrap prices that cannot always be passed on to domestic scrap consumers further reducing the available domestic scrap flows and scrap margins all of which could adversely affect our sales and profitability.

Imports of steel into the United States have in the past adversely affected, and may again adversely affect, U.S. steel prices, which could impact our sales, margins and profitability.

        Excessive imports of steel into the United States as a result of excess world supply, have in past years exerted, and may again in the future exert, downward pressure on U.S. steel prices and may reduce or may negatively affect our ability to increase our sales, margins, and profitability. U.S. steel producers compete with many foreign producers, including those in China. Competition from foreign producers is typically strong and is periodically exacerbated by weakening of the economies of certain foreign steelmaking countries. Greater steel exports to the United States tend to occur at depressed

24

prices when steel producing countries experience periods of economic difficulty, decreased demand for steel products or excess capacity.

        In addition, we believe the downward pressure on, and periodically depressed levels of U.S. steel prices in some recent years have been further exacerbated by imports of steel involving dumping and subsidy abuses by foreign steel producers. Some foreign steel producers are owned, controlled or subsidized by foreign governments. As a result, decisions by these producers with respect to their production, sales and pricing are sometimes influenced to a greater degree by political and economic policy considerations than by prevailing market conditions, realities of the marketplace or consideration of profit or loss. However, while some tariffs and quotas are periodically put in to effect for certain steel products imported from a number of countries that have been found to have been unfairly pricing steel imports to the U.S., many of these are only short-lived. When such tariffs or duties expire or if others are further relaxed or repealed, or if relatively higher U.S. steel prices make it attractive for foreign steelmakers to export their steel products to the United States, despite the presence of duties or tariffs, the resurgence of substantial imports of foreign steel could create downward pressure on U.S. steel prices.

China's current steelmaking overcapacity in relation to its steel consumption could have a material adverse effect on domestic and global steel pricing and could result in increased steel imports into the United States.

        A significant factor in the worldwide volatility of steel pricing in recent years was the explosive growth in Chinese steel consumption in relation to its domestic production, which, until the third quarter of 2008, had vastly outpaced that country's capacity to produce steel in sufficient quantity to serve its internal demand. The shortage of Chinese domestic steel supply, during this time period, resulted not only in heightened Chinese demand for imported steel and other raw materials, with a consequent upward spiral in worldwide steel pricing for finished steel products, but also led to a rapid and significant expansion of steel production capacity in China, as well as many of the commodities, supplies and services utilized in steelmaking. However, the subsequent drop in Chinese steel consumption that began in 2008 and has not fully recovered, in addition to the continued utilization of a large amount of outdated, inefficient and government subsidized production capacity, has resulted in a situation in which China's steel producing capacity currently exceeds that country's reducing demand for many kinds of steel products that we produce, has made China an increasingly larger net exporter of millions of tons of steel since 2008. Therefore, a combination of a slowdown in China's economic growth rate and steel consumption, coupled with its own expansion of steelmaking capacity, could result in a further weakening of both domestic and global steel demand and steel pricing. Also, should Chinese steelmaking capacity remain the same or further increase, or should its demand either not increase or further weaken, China might not only remain a net exporter of steel but many Asian and European steel producers whose steel output previously fed China's steel import needs could find their way into the U.S. market, through increased steel imports, causing a further erosion of margins or negatively impacting our ability to increase our prices.

The worldwide economic downturn that began in 2008 and the difficult conditions in the global industrial, capital and credit markets that resulted, have adversely affected and may continue to adversely affect our business and our industry, as well as the industries of many of our customers and suppliers upon whom we are dependent.

        Many of the markets in which our customers participate, such as the automotive, consumer products, original equipment, agriculture, transportation, manufacturing, commercial, residential and government construction, and metals service center industries, are also cyclical in nature and experience significant fluctuations in demand for our steel products based on economic conditions, consumer demand, raw material and energy costs, and decisions by our government to fund or not fund infrastructure projects such as highways, bridges, schools, energy plants, railroads and transportation

25

facilities. Many of these factors are beyond our control. These markets are highly competitive, to a large extent driven by end-use markets, and may experience overcapacity, all of which may affect demand for and pricing of our products.

        A continued or further decline in consumer and business confidence and spending, together with severe reductions in the availability and cost of credit, as well as volatility in the capital and credit markets, could adversely affect the business and economic environment in which we operate and the profitability of our business. We are also exposed to risks associated with the creditworthiness of our suppliers and customers. If the availability of credit to fund or support the continuation and expansion of our customers' business operation is curtailed or if the cost of that credit is increased the resulting inability of our customers or of their customers to access either credit or absorb the increased cost of that credit could adversely affect our business by reducing our sales or by increasing our exposure to losses from uncollectible customer accounts. These conditions and a renewed disruption of the credit markets could also result in financial instability of some of our suppliers and customers. The consequences of such adverse effects could include the interruption of production at the facilities of our customers, the reduction, delay or cancellation of customer orders, delays or interruptions of the supply of raw materials we purchase, and bankruptcy of customers, suppliers or other creditors. Any of these events may adversely affect our profitability, cash flow, and financial condition.

Volatility and major fluctuations in scrap metal and pig iron prices and our potential inability to pass such higher costs on to our customers may constrain operating levels and reduce profit margins.

        Steel producers require large amounts of raw materials, including scrap metal and scrap substitute products such as pig iron, pelletized iron and other supplies such as graphite electrodes and ferroalloys. While our vertical integration into the metals recycling business through our OmniSource subsidiary and into the ironmaking business, through our Iron Dynamics facility and start-up of our Minnesota iron operations should enable us to be a cost effective supplier to our steelmaking operations, for some of our metallics requirements, we will still need to rely on other metallics and raw material suppliers, as well as upon general industry supply conditions for the balance of our needs.

        Purchase prices for auto bodies, scrap metal and scrap substitute products such as pig iron that we consume, and selling prices for scrap and recycled metals that we sell to third parties are volatile and beyond our control. While OmniSource attempts to respond to changing recycled metal selling prices through adjustments to its metal purchase prices, its ability to do so is limited by competitive and other market factors. Changing prices could potentially impact the volume of scrap metal available to us and the volume and realized margins of processed metals we sell.

        The availability and prices of raw materials may also be negatively affected by new laws and regulations, allocation by suppliers, interruptions in production, accidents or natural disasters, changes in exchange rates, worldwide price fluctuations, and the availability and cost of transportation.

        If prices for ferrous metallics increase by a greater margin than corresponding price increases for the sale of our steel products, we may not be able to recoup such cost increases from increases in the selling prices of steel products. Our inability to pass on all or any substantial part of such cost increases through scrap or other surcharges or to provide for our customers' needs because of the potential unavailability of key raw materials or other inputs, may result in production curtailments or may otherwise have a material adverse effect on our business, financial condition, results of operations or prospects.

The cost and availability of electricity and natural gas are also subject to volatile market conditions.

        Steel producers like us consume large amounts of energy, inasmuch as mini-mills melt steel scrap in electric arc furnaces and use natural gas to heat steel billets for rolling into finished products. We rely on third parties for the supply of energy resources we consume in our steelmaking activities. The

26

prices for and availability of electricity, natural gas, oil and other energy resources are all also subject to volatile market conditions, often affected by weather conditions as well as political and economic factors beyond our control. As large consumers of electricity and gas, we must have dependable delivery in order to operate. Accordingly, we are at risk in the event of an energy disruption. Prolonged black-outs or brown-outs or disruptions caused by natural disasters or by political considerations would substantially disrupt our production. Moreover, much of our finished steel products is typically delivered by truck. Unforeseen fluctuations in the price of fuel attributable to fluctuations in crude oil prices would also have a negative impact on our costs or on the costs of many of our customers. In addition, changes in certain environmental regulations in the U.S., including those that may impose output limitations or higher costs associated with climate change or greenhouse gas emissions legislation, could substantially increase the cost of manufacturing and raw materials, such as energy, to us and other U.S. steel producers.

Fluctuations in the value of the United States dollar relative to other currencies may adversely affect our business.

        Fluctuations in the value of the dollar can be expected to affect our business. A strong U.S. dollar makes imported metal products less expensive, potentially resulting in more imports of steel products into the U.S. by our foreign competitors, while a weak U.S. dollar may have the opposite impact on imports.

Compliance with and changes in environmental and remediation requirements could result in substantially increased capital requirements and operating costs.

        Existing laws or regulations, as currently interpreted or as may be interpreted in the future, as well as future laws or regulations, may have a material adverse effect on our results of operations and financial condition.

        We are subject to comprehensive local, state, federal and international statutory and regulatory environmental requirements relating to, among other things:

•

the acceptance, storage, treatment, handling and disposal of solid and hazardous waste;

•

the discharge of materials into air;

•

the management and treatment of wastewater and storm water;

•

the remediation of soil and groundwater contamination;

•

global climate change legislation or regulation;

•

the need for and the ability to timely obtain air, water or other operating permits;

•

the remediation and reclamation of land used for iron mining;

•

natural resource damages; and

•

the protection of our employees' health and safety.

27

        Compliance with environmental laws and regulations, which affect both our steelmaking and our metals recycling and ironmaking operations, is a significant factor in our business. We are required to obtain and comply with environmental permits and licenses, and failure to obtain or renew or the violation of any permit or license, if not remedied, could result in substantial fines and penalties, suspension of operations or the closure of a subject facility. Similarly, delays in obtaining permits, such as the permits we have been seeking in connection with our plan to engage in the mining of taconite ore in Minnesota, or unanticipated or costly conditions imposed on such permits could further delay a project or affect its profitability. Private parties might also bring claims against us for alleged property damage or personal injury resulting from the environmental impacts of our operations. Moreover, legal requirements change frequently, are subject to interpretation and have tended to become more stringent over time. Uncertainty regarding adequate pollution control levels, testing and sampling procedures, and new pollution control technology are factors that may increase our future compliance expenditures. We are unable to predict the ultimate cost of future compliance with these requirements or their effect on our operations, and we also cannot predict whether such costs can be passed on to customers through product price increases. Although we believe that we are in substantial compliance with all applicable laws and regulations, legal requirements frequently change and are subject to interpretation. New laws, regulations and changing interpretations by regulatory authorities, together with uncertainty regarding adequate pollution control levels, testing and sampling procedures, new pollution control technology and cost benefit analysis based on market conditions are all factors that may increase our future expenditures to comply with environmental requirements. The cost of complying with existing laws or regulations as currently interpreted or reinterpreted in the future, or with future laws or regulations, may have a material adverse effect on our results of operations and financial condition.

        Our manufacturing and recycling operations produce significant amounts of by-products, some of which are handled as industrial waste or hazardous waste. For example, our mills generate electric arc furnace (EAF) dust, which the United States Environmental Protection Agency (USEPA) and other regulatory authorities classify as hazardous waste. EAF dust requires special handling, recycling and disposal.

        In addition, the primary feed materials for the shredders operated by our metals recycling operations are automobile hulks and obsolete household appliances. Approximately 20% of the weight of an automobile hulk consists of unrecyclable material known as shredder fluff. After the segregation of ferrous and saleable nonferrous metals, shredder fluff remains. We, along with others in the recycling industry, interpret federal regulations to require shredder fluff to meet certain criteria and pass a toxic leaching test to avoid classification as a hazardous waste. We also endeavor to remove hazardous contaminants from the feed material prior to shredding. As a result, we believe the shredder fluff we generate is not normally considered or properly classified as hazardous waste. However, if laws or regulations, the interpretation of the laws or regulations, or testing methods change with regard to EAF dust or shredder fluff, we may incur significant additional expenditures.

        The Comprehensive Environmental Response, Compensation and Liability Act ("CERCLA" or "Superfund") enables USEPA and state agencies to recover from owners, operators, generators and transporters the cost of investigation and cleanup of sites which pose serious threats to the environment or public health. In connection with CERCLA and analogous state laws, we may be required to clean up contamination discovered at our sites including contamination that may have been caused by former owners or operators of the sites, conduct additional cleanup at sites where we have already participated in remediation efforts or to take remediation action with regard to sites formerly used in connection with our operations.

        In addition, we may be required to pay for, or to pay a portion of, the costs of remediation at sites to which we sent hazardous wastes for disposal, notwithstanding that the original disposal activity may have complied with all regulatory requirements then in effect. Pursuant to CERCLA, a potentially

28

responsible party can be held jointly and severally liable for all of the cleanup costs associated with a third-party disposal site. In practice, a liable party often splits the costs of cleanup with other potentially responsible parties. We have received notices from USEPA, state agencies and third parties that it has been identified as potentially responsible for the cost of investigating and cleaning up a number of third-party disposal sites. In most cases, many other parties are also named as potentially responsible parties. Based upon information currently available to us, we do not believe the potential cost in connection with the remediation of these sites will have a material effect on our business.

        Because CERCLA can be imposed retroactively on shipments that occurred many years ago, and because USEPA and state agencies are still discovering sites that pose a threat to public health or the environment, we can provide no assurance that we will not become liable in the future for significant costs associated with investigation and remediation of additional CERCLA clean up sites.

        CERCLA, including the Superfund Recycling Equity Act of 1999, limits the exposure of scrap metal recyclers for sales of certain recyclable material under certain circumstances. However, the recycling defense is subject to the conducting of reasonable care evaluations of current and potential consuming facilities.

Increased regulation associated with climate change and greenhouse gas emissions could impose significant additional costs on both our steelmaking and metals recycling operations.

        The United States government or various governmental agencies may introduce regulatory changes in response to the potential impacts of climate change. International treaties or agreements may also result in increasing regulation of greenhouse gas emissions, including the introduction of carbon emissions trading mechanisms. Any such regulation regarding climate change and greenhouse gas, or GHG emissions could impose significant costs on our steelmaking and metals recycling operations and on the operations of our customers and suppliers, including increased energy, capital equipment, environmental monitoring and reporting and other costs in order to comply with current or future laws or regulations concerning and limitations imposed on our operations by virtue of climate change and GHG emissions laws and regulations. The potential costs of "allowances," "offsets" or "credits" that may be part of potential cap-and-trade programs or similar future regulatory measures are still uncertain. Any adopted future climate change and GHG regulations could negatively impact our ability (and that of our customers and suppliers) to compete with companies situated in areas not subject to such limitations. From a medium and long-term perspective, we are likely to see an increase in costs relating to our assets that emit significant amounts of greenhouse gases as a result of these regulatory initiatives. These regulatory initiatives will be either voluntary or mandatory and may impact our operations directly or through our suppliers or customers. Until the timing, scope and extent of any future regulation becomes known, we cannot predict the effect on our financial condition, operating performance and ability to compete.

Risks Related to the Business

Our senior secured credit facility contains, and any future financing agreements may contain, restrictive covenants that may limit our flexibility.

        Restrictions and covenants in our existing debt agreements, including our senior secured credit facility, and any future financing agreements, may impair our ability to finance future operations or capital needs, or to engage in other business activities. Specifically, these agreements restrict our ability to:

•

incur additional indebtedness;

•

pay dividends or make distributions with respect to our capital stock;

•

repurchase or redeem capital stock;

29

•

make some investments;

•

create liens and enter into sale and leaseback transactions;

•

make some capital expenditures;

•

enter into transactions with affiliates or related persons;

•

issue or sell stock of certain subsidiaries;

•

sell or transfer assets; and

•

participate in some joint ventures, acquisitions or mergers.

        A breach of any of the restrictions or covenants could cause a default under our senior secured credit facility, our senior notes, or our other debt. A significant portion of our indebtedness then may become immediately due and payable if the default is not remedied.

        Under our senior secured revolving credit facility we are required to maintain certain financial covenants tied to our leverage, liquidity and profitability. In addition, we are subject to a quarterly borrowing base requirement limiting the maximum availability of our senior secured revolver. Our ability to meet such covenants or borrowing restrictions can be affected by events beyond our control. If a default were to occur, the lenders could elect to declare all amounts then outstanding to be immediately due and payable and terminate all commitments to extend further credit. If we are unable to repay those amounts, the lenders could proceed against the collateral granted to them to secure such indebtedness. We have pledged substantially all of our receivables and inventories and all shares of capital stock or other equity interests of the company's subsidiaries and intercompany debt held by us.

We may face significant price and other forms of competition from other steel producers and scrap processors, which could have a material adverse effect on our business, financial condition, results of operation or prospects.

        The global markets in which steel companies and metals recyclers conduct business are highly competitive and have become even more so, due in part, to consolidations in recent years in the steel and the metal recycling industries, and the recent/ongoing global economic downturn. Increased competition could cause us to lose market share, increase expenditures or reduce pricing, any one of which could have a material adverse effect on our business, financial condition, results of operations or prospects.

We are subject to significant risks relating to changes in commodity prices and may not be able to effectively protect against these risks.

        We are exposed to commodity price risk during periods where we hold title to scrap metal products that we may hold in inventory for processing or resale. Prices of commodities, including recycled metals, can be volatile due to numerous factors beyond our control. In an increasing price environment for raw materials, competitive conditions may limit our ability to pass on price increases to our consumers. In a decreasing price environment for processed recycled metal, we may not have the ability to fully recoup the cost of raw materials that we procure, process and sell to our customers. In addition, new entrants into the market areas we serve could result in higher purchase prices for raw materials and lower margins from our recycled metal. We are unable to hedge positions in certain commodities, such as recycled ferrous metal, where no established futures market exists, or, where we may from time to time hedge our positions in certain nonferrous metal transactions, we could incur losses. Thus, our sales and inventory position will be vulnerable to adverse changes in commodity prices, which could materially adversely impact our operating and financial performance.

30

We may be unable to pass on increases in the cost of ferrous materials and other raw materials to our customers, which would reduce our earnings.

        If from time to time we are unable to pass on periodic increases in ferrous resource and other raw material costs to our customers, we will be less profitable. We may not be able to adjust our product prices, especially in the short-term, to recover the costs of prolonged increases in raw material prices. Our principal raw material is scrap metal derived primarily from junked automobiles, industrial scrap, railroad cars, railroad track materials, agricultural machinery and demolition scrap from obsolete structures, containers and machines. The prices for scrap are subject to market forces largely beyond our control, including demand by U.S. and international steel producers, freight costs and speculation. The prices for scrap have varied significantly, may vary significantly in the future and do not necessarily fluctuate in tandem with the price of steel. Moreover, some of our integrated steel producer competitors are not as dependent as we are on scrap as a part of their raw material melt mix, which, during periods of high scrap costs relative to the cost of blast furnace iron used by the integrated producers, give them a raw material cost advantage over mini-mills. In addition, our operations require substantial amounts of other raw materials, including various types of pig iron, alloys, refractories, graphite electrodes, oxygen, natural gas and electricity, the price and availability of which are also subject to market conditions.

The profitability of our metals recycling operations depends, in part, on the availability of an adequate source of supply.

        We procure our recyclable metal inventory from numerous sources. These suppliers generally are not bound by long-term contracts and have no obligation to sell recyclable metal to us. In periods of low industry prices, suppliers may elect to hold recyclable metal to wait for higher prices or intentionally slow their metal collection activities. If a substantial number of suppliers cease selling recyclable metal to us, we will be unable to recycle metal at desired levels and our results of operations and financial condition could be materially adversely affected. In addition, a slowdown of industrial production in the United States, as has recently occurred, reduces the supply of industrial grades of metal to the metal recycling industry, resulting in our having less recyclable metal available to process and market.

We may face risks associated with the implementation of our growth strategy.

        Our growth strategy subjects us to various risks. As part of our growth strategy, we may expand existing facilities, build additional plants, acquire other businesses and steel assets, enter into joint ventures, or form strategic alliances that we believe will complement our existing business. These transactions will likely involve some or all of the following risks:

•

the difficulty of competing for acquisitions and other growth opportunities with companies having materially greater financial resources than ours;

•

the inability to realize anticipated synergies or other benefits expected from an acquisition;

•

the difficulty of integrating the new or acquired operations and personnel into our existing businesses;

•

the potential disruption to ongoing businesses;

•

the diversion of financial resources to new or acquired businesses;

•

the diversion of management attention from other business concerns to new or acquired businesses;

•

the loss of key employees and customers of acquired businesses;

31

•

the potential exposure to unknown liabilities;

•

the inability of management to maintain uniform standards, controls, procedures and policies;

•

the difficulty of managing the growth of a larger company;

•

the risk of entering markets in which we have little experience;

•

the risk of becoming involved in labor, commercial, or regulatory disputes or litigation related to the new or acquired business;

•

the risk of becoming more highly leveraged;

•

the risk of contractual or operational liability to other venture participants or to third parties as a result of our participation;

•

the inability to work efficiently with joint venture or strategic alliance partners; and

•

the difficulties of terminating joint ventures or strategic alliances.

        Such future initiatives or business transactions may not improve our competitive position and business prospects as anticipated, and if they do not, our sales and earnings may not only not be enhanced, they could be significantly reduced.

Technology, operating and start-up risks, as well as commodity market risks associated with our Mesabi Nugget ironmaking project may prevent us from realizing its anticipated benefits and could result in a loss of all or a part of our investment.

        While we and certain of our current and former joint venture partners built and operated a successful small scale pilot plant on the Mesabi Iron Range in Minnesota for the production of a cost effective iron nugget using Kobe Steel's proprietary ITmK3® ironmaking process, there are technology, operational, market and start-up risks associated with the start-up of our world's first full scale commercial nugget plant utilizing this technology. Although, we believe this full scale plant will be capable of consistently producing high-quality iron nuggets for use as a scrap substitute feed stock in our steelmaking operations, and in sufficient quantities and at a cost that will compare favorably with the cost of steel scrap and other more conventional scrap substitute products, including pig iron, there can be no assurance that these expectations will be achieved. We have encountered and may from time to time encounter cost overruns, systems or process difficulties, or quality control problems or output restrictions. As a result our capital costs could increase, the expected cost benefits from the development of this iron nugget product could be diminished or lost, and we could lose all or a substantial portion of our investment in the project. We could also encounter commodity market risk if, during a sustained period, the cost to manufacture the nuggets is greater than projected or if the relative market price of scrap and other scrap substitutes, for which this iron nugget product is intended as a lower cost substitute, is lower than projected, which could render our nuggets non-economical. Moreover, we are undertaking certain ancillary ventures related to the ironmaking process, such as our nearby Mesabi Mining facility for which we have been and are continuing to seek operating permits to allow us to mine taconite ore for use in the production of nuggets. Mining is a business in which we have no previous experience and which is also subject to possible permitting and environmental risks and uncertainties.

We are subject to litigation which could adversely affect our profitability.

        We are involved in various routine litigation matters, including administrative proceedings, regulatory proceedings, governmental investigations, environmental matters, and commercial and construction contract disputes.

32

        We are also involved, along with eight other steel manufacturing companies, in a class action antitrust complaint filed in federal court in Chicago, Illinois that alleges a conspiracy to fix, raise, maintain and stabilize the price at which steel products were sold in the United States starting in 2005, by artificially restricting the supply of such steel products. All but one of the Complaints purport to be brought on behalf of a class consisting of all direct purchasers of steel products between January 1, 2005, and the present. The other Complaint purports to be brought on behalf of a class consisting of all indirect purchasers of steel products within the same time period. In addition, on December 28, 2010, we and the other co-defendants were served with a substantially similar complaint in the Circuit Court of Cocke County, Tennessee, purporting to be on behalf of indirect purchasers of steel products in Tennessee. The case has been removed to federal court. All Complaints seek treble damages and costs, including reasonable attorney fees, pre- and post-judgment interest and injunctive relief. On January 2, 2009, Steel Dynamics and the other defendants filed a Joint Motion to Dismiss all of the direct purchaser lawsuits. On June 12, 2009, however, the Court denied the Motion. The parties are currently conducting discovery related primarily to class certification matters. Due to the uncertain nature of litigation, we cannot presently determine the ultimate outcome of this litigation, however we have determined, based on the information available at this time, that there is not presently a "reasonable possibility" (as that term is defined in ASC 450-20-20), that the outcome of these legal proceedings would have a material impact on our financial condition, results of operations, or liquidity.

        Although not presently necessary or appropriate to make a dollar estimate of exposure to loss, if any, in connection with the above matter, we may in the future determine that a loss accrual is necessary. Although we may make loss accruals, if and as warranted, any amounts that we may accrue from time to time could vary significantly from the amounts we actually pay, due to inherent uncertainties and the inherent shortcomings of the estimation process, the uncertainties involved in litigation and other factors. Additionally, an adverse result could have a material effect on our financial condition, results of operations and liquidity.

Unexpected equipment failures may lead to production curtailments or shutdowns.

        Interruptions in our production capabilities could adversely affect our production costs, products available for sales and earnings during the affected period. In addition to equipment failures, our facilities are also subject to the risk of catastrophic loss due to unanticipated events such as fires, explosions or violent weather conditions. Our manufacturing processes are dependent upon critical pieces of steelmaking equipment, such as our furnaces, continuous casters and rolling equipment, as well as electrical equipment, such as transformers. This equipment may, on occasion, be out of service as a result of unanticipated failures. We have experienced and may in the future experience material plant shutdowns or periods of reduced production as a result of such equipment failures.

Some of our operations present significant risk of injury or death.

        The industrial activities conducted at our facilities present significant risk of serious injury or death to our employees, customers or other visitors to our operations, notwithstanding our safety precautions, including our material compliance with federal, state and local employee health and safety regulations. While we have in place policies and procedures to minimize such risks, we may nevertheless be unable to avoid material liabilities for an injury or death. Even though we maintain workers' compensation insurance to address the risk of incurring material liabilities for injury or death, there can be no assurance that the insurance coverage will be adequate or will continue to be available on the terms acceptable to us, or at all, which could result in material liabilities for an injury or death.

33

Governmental agencies may refuse to grant or renew some of our licenses and permits.

        We must receive licenses, permits and approvals from state and local governments to conduct certain of our operations such as our Mesabi Mining operations, or to develop or acquire new facilities. Governmental agencies often resist the establishment of certain types of facilities in their communities, including scrap metal collection and processing facilities and there may be environmental objections or concerns raised by governmental agencies or private citizens. There can be no assurance that future approvals, licenses and permits will be granted or that we will be able to maintain and renew the approvals, licenses and permits we currently hold in all our operations, and failure to do so could have a material adverse effect on our results of operations and financial condition.

ITEM 1B.    UNRESOLVED STAFF COMMENTS

        None.

34

ITEM 2.    PROPERTIES

        The following table describes our more significant properties as of December 31, 2011. These properties are owned or leased by us and are not subject to any significant encumbrances. We believe these properties are suitable and adequate for our current operations and are appropriately utilized.

Operations	Location	Property Type	Site Acreage Owned		Site Acreage Leased
Steel Operations
Flat Roll Division:
Butler Operations	Butler, IN	Steel Manufacturing and Coating Facility		1,106		—
Jeffersonville Operations	Jeffersonville, IN	Steel Coating Facility		—		36
Structural and Rail Division	Columbia City, IN	Steel Manufacturing Facility		699		—
Engineered Bar Division	Pittsboro, IN	Steel Manufacturing and Finishing Facility		285		—
Roanoke Bar Division	Roanoke, VA	Steel Manufacturing Facility		290		—
Steel of West Virginia	Huntington, WV	Steel Manufacturing and Finishing Facility		49		—
The Techs	Pittsburgh, PA	Steel Coating Facilities		16		2
Metals Recycling and Ferrous Resources
OmniSource:
Georgia	Multiple Cities	Ferrous and Nonferrous Scrap Processing		103		1
Indiana	Multiple Cities	Ferrous and Nonferrous Scrap Processing		578		30
Michigan	Multiple Cities	Ferrous and Nonferrous Scrap Processing		301		11
North Carolina	Multiple Cities	Ferrous and Nonferrous Scrap Processing		506		1
Ohio	Multiple Cities	Ferrous and Nonferrous Scrap Processing		239		22
South Carolina	Multiple Cities	Ferrous and Nonferrous Scrap Processing		228		100
Tennessee	Multiple Cities	Ferrous and Nonferrous Scrap Processing		44		7
Virginia	Multiple Cities	Ferrous and Nonferrous Scrap Processing		188		—
Iron Dynamics	Butler, IN	Liquid Ironmaking Facility		25		—
SDI LaFarga, LLC	New Haven, IN	Copper Wire Rod Facility		40		—
Mesabi Nugget	Hoyt Lakes, MN	Ironmaking Facility		*		*
Mesabi Mining	Hoyt Lakes, MN	Iron Ore Mining (under development)		*		*
Mining Resources	Chisholm, MN	Iron Ore Tailings Mining (under development)		**		**
Steel Fabrication Operations
New Millennium Building Systems:
Joist and Deck Operations	Butler, IN	Steel Fabrication Facility		95		—
Joist and Deck Operations	Lake City, FL	Steel Fabrication Facility		75		—
Joist and Deck Operations	Salem, VA	Steel Fabrication Facility		62		—
Joist and Deck Operations	Hope, AR	Steel Fabrication Facility		61		—
Joist Operations	Fallon, NV	Steel Fabrication Facility		43		—
Joist Operations	Juarez, MX	Steel Fabrication Facility		15		—
Joist Operations	Florence, SC	Steel Fabrication Facility (idle)		66		—
Joist Operations	Continental, OH	Steel Fabrication Facility (idle)		54		—
Corporate Headquarters	Fort Wayne, IN	Office Building (116,000 square feet)		20		—

*

The Mesabi Nugget and Mesabi Mining properties are located at the site of an open pit taconite mine on the Mesabi Iron Range near Hoyt Lakes, Minnesota. The site encompasses land owned outright by us (including mineral and surface rights) and land for which we acquired a leasehold interest (including mineral and surface rights). The properties were purchased from Cleveland Cliffs, Inc. and the mines were formerly operated by LTV Corporation. Mesabi Mining is

35

currently working to obtain the necessary permits to commence mining operations. The concentrate eventually provided by the mines is intended as a raw material input for the iron nugget production.

**

Mining Resources has leases with the State of Minnesota Department of Natural Resources Division of Lands and Minerals for iron-bearing materials on 295 acres of iron tailings basins located in Chisholm, Minnesota. A processing plant is being constructed on property adjacent to these iron tailings basins.

ITEM 3.   LEGAL PROCEEDINGS

        We are involved in various routine litigation matters, including administrative proceedings, regulatory proceedings, governmental investigations, environmental matters, and commercial and construction contract disputes.

        We are also involved, along with eight other steel manufacturing companies, in a class action antitrust complaint filed in federal court in Chicago, Illinois that alleges a conspiracy to fix, raise, maintain and stabilize the price at which steel products were sold in the United States starting in 2005, by artificially restricting the supply of such steel products. All but one of the Complaints purport to be brought on behalf of a class consisting of all direct purchasers of steel products between January 1, 2005, and the present. The other Complaint purports to be brought on behalf of a class consisting of all indirect purchasers of steel products within the same time period. In addition, on December 28, 2010, we and the other co-defendants were served with a substantially similar complaint in the Circuit Court of Cocke County, Tennessee, purporting to be on behalf of indirect purchasers of steel products in Tennessee. The case has been removed to federal court. All Complaints seek treble damages and costs, including reasonable attorney fees, pre- and post-judgment interest and injunctive relief. On January 2, 2009, Steel Dynamics and the other defendants filed a Joint Motion to Dismiss all of the direct purchaser lawsuits. On June 12, 2009, however, the Court denied the Motion. The parties are currently conducting discovery related primarily to class certification matters. Due to the uncertain nature of litigation, we cannot presently determine the ultimate outcome of this litigation, however we have determined, based on the information available at this time, that there is not presently a "reasonable possibility" (as that term is defined in ASC 450-20-20), that the outcome of these legal proceedings would have a material impact on our financial condition, results of operations, or liquidity.

        Although not presently necessary or appropriate to make a dollar estimate of exposure to loss, if any, in connection with the above matter, we may in the future determine that a loss accrual is necessary. Although we may make loss accruals, if and as warranted, any amounts that we may accrue from time to time could vary significantly from the amounts we actually pay, due to inherent uncertainties and the inherent shortcomings of the estimation process, the uncertainties involved in litigation and other factors. Additionally, an adverse result could have a material effect on our financial condition, results of operations and liquidity.

ITEM 4.    MINE SAFETY DISCLOSURES

        The information required to be furnished pursuant to Item 4 concerning mine safety disclosure matters required by Section 1503(a) of the Dodd-Frank Wall Street Reform and Consumer Protection Act and Item 104 of Regulation S-K (17 CFR 229.104) is included in Exhibit 95 to this Annual Report.

36

PART II

ITEM 5.    MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

        The information required by Item 5 with respect to securities authorized for issuance under equity compensation plans is set forth in Part III, Item 12 of this Form 10-K. Our common stock trades on The NASDAQ Global Select Stock Market under the symbol STLD. The reported high and low "intra-day" sales prices of our common stock and our dividend information for the two most recent fiscal years are set forth in the following table (in dollars):

	Common Stock Market Price
					Dividends Declared
	High		Low
2011
First Quarter	$	20.70	$	17.33	$	.100
Second Quarter		19.84		14.80		.100
Third Quarter		16.55		9.91		.100
Fourth Quarter		13.90		8.78		.100
2010
First Quarter	$	20.47	$	14.31	$	.075
Second Quarter		18.94		13.12		.075
Third Quarter		15.59		12.89		.075
Fourth Quarter		18.64		13.97		.075

        As of February 17, 2012 we had 219,035,240 shares of common stock outstanding and held beneficially by approximately 20,800 stockholders based on our security position listing. Because many of the shares were held by depositories, brokers and other nominees, the number of registered holders (approximately 1,670) is not representative of the number of beneficial holders.

        We declared our first quarterly cash dividend during July 2004 and continued quarterly dividends throughout 2011. Our board of directors, along with executive management, approves the payment of dividends on a quarterly basis. The determination to pay cash dividends in the future will be at the discretion of our board of directors, after taking into account various factors, including our financial condition, results of operations, outstanding indebtedness, current and anticipated cash needs and growth plans. In addition, the terms of our senior secured revolving credit agreement and the indenture relating to our senior notes restrict the amount of cash dividends we can pay.

37

Total Return Graph

COMPARISON OF 5 YEAR CUMULATIVE TOTAL RETURN*
Among Steel Dynamics, Inc., the NASDAQ Composite Index, and the S&P Steel Index

*

$100 invested on 12/31/06 in stock or index, including reinvestment of dividends.
Fiscal year ending December 31.

Copyright© 2012 S&P, a division of The McGraw-Hill Companies Inc. All rights reserved.

38

ITEM 6.    SELECTED FINANCIAL DATA

        The following table sets forth the selected consolidated financial and operating data of Steel Dynamics Inc. The selected consolidated financial and operating data as of and for each of the years in the five-year period ended December 31, 2011 were derived from our audited consolidated financial statements. You should read the following data in conjunction with Management's Discussion and Analysis of Financial Condition and Results of Operations and our consolidated financial statements and notes appearing elsewhere in this Form 10-K.

        You should also read the following information in conjunction with the data in the table on the following page:

•

On June 9, 2008, we completed the acquisition of Recycle South, a privately-held, regional scrap metal recycling company located in the southeastern United States. Recycle South operations are reflected in our metals recycling and ferrous resources operating segment.

•

On October 26, 2007, we completed the acquisition of OmniSource Corporation, a privately-held scrap metal recycling and trading company. OmniSource operations are reflected in our metals recycling and ferrous resources operating segment.

•

On July 2, 2007, we completed the acquisition of The Techs, three flat rolled steel galvanizing facilities. The Techs operations are reflected in our steel operating segment.

•

For purposes of calculating our "ratio of earnings to fixed charges", earnings consist of earnings from continuing operations before income taxes, extraordinary items and before adjustments for noncontrolling interests, adjusted for the portion of fixed charges deducted from these earnings, plus amortization of capitalized interest. Fixed charges consist of interest on all indebtedness, including capitalized interest, and amortization of debt issuance costs.

•

For purposes of calculating our "operational working capital" for all periods presented, we consider amounts invested in trade receivables and inventories, less current liabilities other than income taxes payable and debt as reported on our consolidated balance sheets. Operational working capital reported for 2010 - 2007 in the company's previous Form 10-K had included the effects of income taxes receivable and payable.

39

	Years Ended December 31,
	2011		2010		2009			2008		2007
	(dollars in thousands, except per share data)
Operating data:
Net sales	$	7,997,500	$	6,300,887	$	3,958,806		$	8,080,521	$	4,384,844
Gross profit		931,518		675,666		399,076			1,231,259		915,694
Operating income		584,820		364,753		119,531			846,368		690,745
Net income (loss)		265,692		129,599		(11,019	)		454,514		394,157
Net income (loss) attributable to Steel Dynamics, Inc.		278,120		140,709		(8,184	)		463,386		394,566
Basic earnings (loss) per share	$	1.27	$	..65	$	(.04	)	$	2.45	$	2.12
Weighted average common shares outstanding		218,471		216,760		200,704			189,140		186,321
Diluted earnings (loss) per share	$	1.22	$	.64	$	(.04	)	$	2.38	$	2.01
Weighted average common shares and share equivalents outstanding		235,992		234,717		200,704			194,586		196,805
Dividends declared per share	$	.400	$	.300	$	.325		$	.400	$	.300
Other financial data:
Capital expenditures	$	167,007	$	133,394	$	330,052		$	412,497	$	395,198
Ratio of earnings to fixed charges		3.40x		2.20x		.78x			5.44x		9.37x
Other data:
Shipments
Steel operations (net tons)		5,842,694		5,295,852		4,045,787			5,608,898		5,550,207
Metals recycling and ferrous resources Ferrous metals (gross tons)		5,879,729		5,179,812		3,631,102			4,958,518		973,891
Nonferrous metals (thousands of pounds)		1,066,648		961,288		780,084			911,832		137,417
Mesabi Nugget (metric tons)		159,641		67,485		—			—		—
Iron Dynamics (metric tons)		229,502		225,545		201,897			232,593		223,805
Steel fabrication operations (net tons)		217,838		164,431		145,259			286,612		276,836
Steel operations production (net tons)		5,931,833		5,413,093		4,187,526			5,584,019		5,471,314
Shares outstanding (in thousands)		218,874		217,575		216,000			181,820		190,324
Number of employees		6,530		6,180		5,990			6,652		5,940
Balance sheet data:
Cash and equivalents, and short-term commercial paper	$	475,591	$	186,513	$	9,008		$	16,233	$	28,486
Operational working capital		1,276,916		1,189,086		857,708			990,516		1,035,027
Net property, plant and equipment		2,193,745		2,213,333		2,254,050			2,072,857		1,652,097
Total assets		5,979,226		5,589,934		5,129,872			5,253,577		4,519,453
Long-term debt (including current maturities)		2,380,100		2,386,821		2,222,754			2,650,384		2,029,845
Equity		2,299,900		2,076,835		2,003,265			1,632,313		1,540,234

40

ITEM 7.    MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATION

Forward-Looking Statements

        This report contains some predictive statements about future events, including statements related to conditions in the steel and metallic scrap markets, Steel Dynamics' revenues, costs of purchased materials, future profitability and earnings, and the operation of new or existing facilities. These statements are intended to be made as "forward-looking," subject to many risks and uncertainties, within the safe harbor protections of the Private Securities Litigation Reform Act of 1995. Some factors that could cause such forward-looking statements to turn out differently than anticipated include: (1) the effects of a recurrent recession on industrial demand; (2) changes in economic conditions, either generally or in any of the steel or scrap-consuming sectors which affect demand for our products, including the strength of the non-residential and residential construction, automotive, appliance, and other steel-consuming industries; (3) fluctuations in the cost of key raw materials (including steel scrap, iron units, and energy costs) and our ability to pass-on any cost increases; (4) the impact of domestic and foreign import price competition; (5) risks and uncertainties involving product and/or technology development; and (6) occurrences of unexpected plant outages or equipment failures.

        More specifically, we refer you to the sections titled Special Note Regarding Forward-Looking Statements and Risk Factors in this report, as well as in other reports which we file with the Securities and Exchange Commission, for a more detailed discussion of some of the many factors, variable risks and uncertainties that could cause actual results to differ materially from those we may have expected or anticipated. These reports are available publicly on the SEC web site, www.sec.gov, and on our web site, www.steeldynamics.com. Forward-looking or predictive statements we make are based upon information and assumptions, concerning our businesses and the environments in which they operate, which we consider reasonable as of the date on which these statements are made. Due to the foregoing risks and uncertainties however, as well as, matters beyond our control which can affect forward-looking statements, you are cautioned not to place undue reliance on these predictive statements, which speak only as of the date of this report. We undertake no duty to update or revise any forward-looking statement, whether as a result of new information, future events or otherwise.

Operating Statement Classifications

        Net Sales.    Net sales from our operations are a factor of volumes shipped, product mix and related pricing. We charge premium prices for certain grades of steel, product dimensions, certain smaller volumes, and for value-added processing or coating of the steel products. Except for our steel fabrication operations segment, we recognize revenue from sales and the allowance for estimated returns from these sales at the time the title of the product is transferred to the customer. Provision is made for estimated product returns and customer claims based on estimates and actual historical experience. Net sales from steel fabrication operations are recognized from construction contracts utilizing a percentage-of-completion method, which is based on the percentage of steel consumed to date as compared to the estimated total steel required for each contract.

        Costs of Goods Sold.    Our costs of goods sold represent all direct and indirect costs associated with the manufacture of our products. The principal elements of these costs are scrap and scrap substitutes (which represent the most significant single component of our consolidated costs of goods sold), steel, direct and indirect labor and related benefits, alloys, zinc, transportation and freight, repairs and maintenance, utilities (most notably electricity and natural gas), and depreciation.

        Selling, General and Administrative Expenses.    Selling, general and administrative expenses consist of all costs associated with our sales, finance and accounting, and administrative departments. These

41

costs include, among other items, labor and related benefits, professional services, insurance premiums, property taxes, profit sharing, and amortization of intangible and other assets.

        Interest Expense, net of Capitalized Interest.    Interest expense consists of interest associated with our senior credit facilities and other debt net of interest costs that are required to be capitalized during the construction period of certain capital investment projects.

        Other (Income) Expense, net.    Other income consists of interest income earned on our temporary cash deposits and any other non-operating income activity, including gains on certain short-term investments and income from non-consolidated investments accounted for under the equity method. Other expense consists of any non-operating costs.

Overview

        We are one of the largest steel producers and one of the largest metals recyclers in the United States based on a current estimated annual steelmaking capability of 6.4 million tons and actual metals recycling shipping volumes during 2011 and 2010 of 5.9 million gross tons and 5.2 million gross tons of ferrous materials, respectively, and 1.1 billion pounds and 961 million pounds of nonferrous metals, respectively. Our steel production during 2011 and 2010, excluding The Techs, was 5.2 million tons and 4.7 million tons, respectively. The primary sources of our revenues are from the manufacture and sale of steel products; processing and sale of recycled ferrous and nonferrous metals; and to a lesser degree, fabrication and sale of steel joist and decking products. Our operations are managed and reported based on three operating segments: steel operations, metals recycling and ferrous resources operations, and steel fabrication operations.

        During 2011, we had net sales of $8.0 billion, gross profit of $931.5 million (12%), and operating income of $584.8 million (7%); as compared to net sales of $6.3 billion, gross profit of $675.7 million (11%) and operating income of $364.8 million (6%) during 2010; and net sales of $4.0 billion, gross profit of $399.1 million (10%), and operating income of $119.5 million (3%) during 2009.

        Net income attributable to Steel Dynamics, Inc. was $278.1 million, or $1.22 per diluted share in 2011, compared with $140.7 million, or $0.64 per diluted share in 2010, and a net loss of $8.1 million, or ($0.04) per diluted share in 2009.

        During 2011, as the domestic economy continued to show signs of improvement, we experienced further increased sales volumes and pricing, resulting in increased gross profit across all reporting segments in comparison to 2010. Steel operations experienced overall improved customer order volume and pricing with the most impactful demand improvements in 2011, as in 2010, in our sheet and special bar-quality steel products as the automotive, transportation, industrial, and agricultural and construction equipment markets continued to strengthen. Steel operations shipping volumes improved 9% and overall steel pricing increased 16% on a per ton basis, resulting in 2011 operating profit from steel operations increasing over that of 2010 by 50% to $658.1 million. Operating income of our metals recycling ferrous resources segment increased in 2011 to $26.6 million as compared to $19.7 million in 2010. At OmniSource, our metals recycling operations within our metals recycling and ferrous resources segment, ferrous and nonferrous metals sales volume and pricing increased as demand continued to improve in 2011 in conjunction with increases in domestic and international steel mill utilization rates, and other production increases. However, there was margin percentage compression in both ferrous and nonferrous metals that offset much of the sales volume and pricing gains, resulting in operating profit at OmniSource increasing slightly in 2011 compared to 2010.

        During 2010, we experienced improved net sales compared to 2009, driven by the general improvement of the domestic economy, resulting in increasing customer demand and pricing for our products. Steel operations experienced overall improved customer order volume and pricing. The most impactful demand improvement in 2010 versus 2009 was in our sheet and special bar-quality steel

42

products as the automotive, transportation, industrial, and agricultural and construction equipment markets showed signs of strengthening. Operating income in our steel operations for 2010 was up $243.6 million, or 124%, compared with that of 2009 due to the improved volumes and pricing. Our metals recycling operations experienced improved shipping volumes and pricing of both ferrous and nonferrous metals in 2010, as demand improved due in large part to domestic and international steel production utilization rates increasing as compared to 2009. As a result of much stronger metals recycling operations, as well as those of Iron Dynamics, operating income in our metals recycling and ferrous resources operations increased $24.4 million, to $19.7 million, compared with 2009. The construction of the Mesabi Nugget facility was completed in 2009, and initial production of iron nuggets commenced January 2010. During 2010, Mesabi Nugget produced 75,000 metric tons of iron-nuggets for use by our own steel mills.

2012 Outlook

        Looking ahead to 2012, we are optimistic regarding a continued slow but steady growth in the U.S. economy, which could result in increased volumes compared to 2011 for all of our operations. We believe steel consumption will continue to grow in the automotive, transportation, energy, industrial, agricultural and heavy equipment sectors. We believe residential and non-residential construction activity has likely reached its bottom and may continue to show some modest growth. The fruition of these combined factors could result in an improved operating environment for all our segments in the coming year.

        Our focus will continue to be on disciplined cost control, gross margin optimization, and prudent growth opportunities, while continuing to manage risk in an uncertain economic environment. Our current estimated 2012 cash allocation plan includes the investment of between $225.0 and $250.0 million in capital expenditures in our existing and announced operations.

43

Segment Operating Results 2011 vs. 2010 (dollars in thousands)

	Years Ended December 31,
	2011			% Change			2010			% Change			2009
Net sales
Steel	$	5,070,306			27	%	$	3,999,639			53	%	$	2,606,969
Metals recycling and ferrous resources		4,152,568			31	%		3,179,032			89	%		1,682,133
Steel fabrication		276,408			56	%		177,378			12	%		158,008
Other		105,148			19	%		88,355			55	%		56,846
		9,604,430						7,444,404						4,503,956
Intra-company		(1,606,930	)					(1,143,517	)					(545,150	)
Consolidated	$	7,997,500			27	%	$	6,300,887			59	%	$	3,958,806
Operating income (loss)
Steel	$	658,120			50	%	$	439,795			124	%	$	196,225
Metals recycling and ferrous resources		26,597			35	%		19,686			518	%		(4,709	)
Steel fabrication		(6,584	)		74	%		(25,056	)		(294	)%		(6,356	)
Other(1)		(95,141	)					(66,189	)					(45,356	)
		582,992						368,236						139,804
Intra-company		1,828						(3,483	)					(20,273	)
Consolidated	$	584,820			60	%	$	364,753			205	%	$	119,531

(1)

Other consists of the results of subsidiary operations that are below the quantitative thresholds required for reportable segments as well as unallocated corporate accounts, including profit sharing.

Steel Operations

        Steel Operations.    Steel operations consist of our five electric-arc furnace mini-mills, producing steel from steel scrap, utilizing continuous casting, automated rolling mills, and various downstream finishing facilities, including The Techs operations. Collectively, our steel operations sell directly to end users and service centers. These products are used in numerous industry sectors, including the automotive, construction, commercial, transportation, agriculture, and industrial machinery markets. During 2011, 2010, and 2009, our steel operations accounted for 61%, 61%, and 63% respectively, of our external net sales. Operating income for steel operations increased $218.3 million, or 50%, to $658.1 million in 2011 versus 2010. This increase is due to increases in overall sales volumes of 9%, with long products increasing 22%, as well as increases in average selling prices of $122 per ton shipped, which were only partially offset by less significant increases in raw material costs.

44

        Steel operations shipping volumes for the respective periods were as follows:

	Years Ended December 31,
	2011			% of external			2010			% of external			2009			% of external
Shipments (tons)
Flat Roll Division		2,770,466						2,642,681						2,060,874
The Techs		715,833						715,512						644,612
Sheet products		3,486,299			64	%		3,358,193			68	%		2,705,486			71	%
Structural and Rail Division		879,145						630,224						477,116
Engineered Bar Products Division		634,964						568,360						303,616
Roanoke Bar Division		544,384						504,613						356,829
Steel of West Virginia		297,902						234,462						202,740
Long products		2,356,395			43	%		1,937,659			39	%		1,340,301			35	%
Total shipments		5,842,694			108	%		5,295,852			107	%		4,045,787			106	%
Intra-segment shipments		(130,813	)					(69,705	)					(55,013	)
Segment shipments		5,711,881						5,226,147						3,990,774
Intra-company shipments		(292,145	)					(276,014	)					(196,652	)
External shipments		5,419,736						4,950,133						3,794,122

Sheet Products.    Our Flat Roll Division sells a broad range of sheet steel products, such as hot rolled, cold rolled and coated steel products, including a large variety of specialty products such as light gauge hot rolled, galvanized, Galvalume® and painted products. The Techs operations, comprised of three galvanizing lines, also sells specialized galvanized sheet steels used in non-automotive applications. Sheet products represented 64% of our steel segment's shipped tons in 2011, as compared to 68% in 2010, and 71% in 2009.

Long Products.    Our Structural and Rail Division sells structural steel beams and pilings and is also designed to produce and sell a variety of standard and premium-grade rail for the railroad industry. Our Engineered Bar Products Division primarily sells special bar quality and merchant bar quality rounds and round-cornered squares. Our Roanoke Bar Division sells billets and merchant steel products, including angles, plain rounds, flats and channels. Steel of West Virginia primarily sells merchant beams, channels and specialty structural steel sections.

        Net sales for the steel segment increased in 2011 by $1.1 billion, or 27%, compared to 2010. Steel segment shipments were up 9% in 2011 compared to 2010 due to the overall improved domestic economic climate as steel mill utilization improved to approximately 74% in 2011 as compared to 70% in 2010, with increased automotive, heavy equipment, agricultural, and trailer demand. Additionally, while service center and customer inventories continued to remain at historically low levels, increases in end-user order activity directly impacted our own orders. Sheet product shipments increased 4% in 2011 compared to 2010, while long products increased 22%. Shipments in 2011 at Engineered Bar Products and Steel of West Virginia increased 12% and 27%, respectively. Although the non-residential construction market continued to remain slow, we saw some improvement in sales and order entry at our Structural and Rail Division in 2011 as compared to 2010, including 117,000 rail tons sold in 2011 versus 55,000 rail tons in 2010. We continue to realize market share gains in rail, and plan to further expand rail shipments in 2012.

        Our 2011 average steel operations' segment selling price per ton shipped, including intra-company shipments, increased $122 compared with 2010. Sheet products 2011 average selling price per ton shipped increased $123 compared with 2010, consistent with overall industry pricing, and long products

45

average selling prices increased $114 per ton compared with 2010, as demand also improved in the long products market, especially in those served by our Engineered Bar Products Division and Steel of West Virginia.

Steel Operations Average Selling Prices and Volumes

        Metallic raw materials used in our electric arc furnaces represent our single most significant manufacturing cost. Our metallic raw material cost per net ton consumed in our steel operations increased $71 in 2011 compared with 2010. During 2011, 2010, and 2009, respectively, our metallic raw material costs represented 68% 62%, and 52% of our steel operations' manufacturing costs, excluding the operations of The Techs, which purchases, rather than produces, the steel it further processes. The lower relationship of scrap costs to total costs in 2009 is due to a much lower cost per ton of metallic raw materials consumed in 2009 during the depths of the recession.

46

Metals Recycling and Ferrous Resources Operations

        Metals Recycling and Ferrous Resources Operations.    This operating segment includes our metals recycling operations (OmniSource); our liquid pig iron production facility, Iron Dynamics (IDI); and our Minnesota iron operations. Our metals recycling and ferrous resources operations segment accounted for 35%, 35%, and 31% of our external net sales in 2011, 2010, and 2009, respectively. Operating income for the metals recycling and ferrous resources operations segment increased $6.9 million in 2011 to $26.6 million.

        Metals recycling and ferrous resources shipping volumes during the respective periods were as follows:

	Years Ended December 31,
	2011			% Change			2010			% Change			2009
Ferrous metal (gross tons)
Total		5,879,729			14	%		5,179,812			43	%		3,631,102
Intra-segment		(12,227	)					—						—
Segment shipments		5,867,502			13	%		5,179,812			43	%		3,631,102
Intra-company		(2,552,472	)					(2,161,145	)					(1,434,602	)
External shipments		3,315,030			10	%		3,018,667			37	%		2,196,500
Nonferrous metals (thousands of pounds)
Total and segment shipments		1,066,648			11	%		961,288			23	%		780,084
Intra-company		(8,273	)					(8,886	)					—
External shipments		1,058,375			11	%		952,402			22	%		780,084
Mesabi Nugget (metric tons)—intra-company shipments		159,641			137	%		67,485						—
Iron Dynamics (metric tons)
Liquid pig iron		188,688						177,548						163,862
Hot briquetted iron		31,646						45,365						36,689
Other		9,168						2,632						1,346
Intra-company shipments		229,502			2	%		225,545			12	%		201,897

Metals Recycling.    Our metals recycling operations, OmniSource, represent our metals sourcing and processing operations and are the most significant source of revenues and earnings in this segment. These operations sell ferrous metals to steel mills and foundries, and nonferrous metals, such as copper, brass, aluminum and stainless steel to, among others, ingot manufacturers, copper refineries and mills, smelters, and specialty mills. Our metals recycling operations represented 95%, 96%, and 96% of this segment's net sales during 2011, 2010, and 2009; and $66.4 million, $65.7 million, and $16.9 million of this segments' operating income for these same periods, respectively.

During 2011, metals recycling recorded sales of $3.9 billion on shipments of 5.9 million gross tons of ferrous metals and 1.1 billion pounds of nonferrous metals, compared with sales of $3.0 billion on shipments of 5.2 million gross tons of ferrous and 952.4 million pounds of nonferrous metals during 2010. Sales prices of ferrous and nonferrous metals increased 18% and 9%, respectively, in 2011 versus 2010. The increased volume and pricing of our ferrous metals is directly impacted by the increase in both domestic and global steel mill utilization. During 2011, the metals recycling operations provided approximately 52% of the steel scrap purchased by our steel mills. This represented 43% of the metals recycling operations' ferrous shipments for 2011, while similar amounts were 42% for 2010, and 39% for 2009.

Metals recycling operating income increased $739,000, to $66.4 million, in 2011 as compared to 2010. The increase in ferrous and nonferrous selling prices were more than offset by increased unprocessed scrap metal procurement costs, thus resulting in reduced metals margins per unit sold.

47

Ferrous Resources.    Our ferrous resource operations consist of our two ironmaking initiatives: Iron Dynamics (IDI), a liquid pig iron production facility, and our Minnesota iron operations, consisting of an iron nugget production facility and planned operations to supply the nugget facility with its primary raw material, iron concentrate. IDI primarily produces liquid pig iron, which is used as a scrap substitute raw material input exclusively at our Flat Roll Division. Our Minnesota iron operations consists of Mesabi Nugget, (owned 81% by us); our planned future iron mining operations which is currently in the permitting process, Mesabi Mining; and, our planned iron tailings operations, Mining Resources (owned 80% by us.) The construction of the Mesabi Nugget facility was completed in 2009, and initial production of iron nuggets commenced January 2010. Throughout 2010 and 2011, we have refined this pioneering production process and changed equipment configurations to increase production and plant availability. The facility's anticipated annual production capacity is 500,000 metric tons. In 2011 and 2010, Mesabi Nugget produced 156,000 and 75,000 metric tons of iron-nuggets, respectively, for use by our own steel mills. We are currently constructing the iron tailings operation, which is expected to start up in the third quarter of 2012. This operation is planned to provide iron ore tailings to be concentrated for use by Mesabi Nugget as a low-cost iron concentrate to the nugget production process. Losses from our Minnesota iron operations reduced our net income in 2011 by approximately $34.0 million, approximately $7.0 million more than in 2010 when the location commissioned initial start-up. The increased losses in 2011 were due to the continued start-up efforts and decreased market selling prices in 2011, as pig iron market prices decreased. Increases in the operating income of IDI in 2011 over those in 2010 more than offset the increased losses of our Minnesota iron operations.

Steel Fabrication Operations

        Our steel fabrication operations represent the company's New Millennium Building Systems' plants located throughout the United States and Northern Mexico. Revenues from these plants are generated from the fabrication of trusses, girders, steel joists and steel decking used within the non-residential construction industry. Steel fabrication operations accounted for 3%, 3%, and 4% of our external net sales during 2011, 2010, and 2009, respectively. The operating loss for the segment was $6.6 million in 2011, compared to $12.3 million in 2010 (excluding a $12.8 million impairment charge), and $6.4 million in 2009.

        Net sales for the segment increased by $99.0 million, or 56%, in 2011 compared to 2010; as our selling volumes increased 32% to 218,000 tons in 2011, and our average steel fabrication operations' selling price per ton shipped increased $190, or 18%, in 2011 as compared to 2010. Our volume growth can be attributed to some modest growth within the non-residential construction market as a whole, our organic gains in market share, as well as our expansion into the south and southwest during 2011. While we saw increased order entry, sales volumes and pricing, and margins in the fabrication segment in 2011 versus 2010, the non-residential construction market continues to be at depressed levels. We anticipate that if the non-residential market further develops, it may be slowly. We are well positioned to grow with our expanded national footprint as we anticipate continuing to develop our market presence and penetration in the western portion of the United States.

        The purchase of various steel products is the largest single cost of goods sold item for our steel fabrication operations. During 2011, 2010, and 2009, the cost of steel products purchased represented 70% of the total cost of manufacturing for our steel fabrication operations; while the cost of steel increased in 2011, as compared to 2010, by $99 per ton. As the increase in selling prices outpaced the increase in input costs, and sales volume increased, the segment's gross profit increased $16.4 million, or 136%, in 2011 versus 2010.

48

Steel Fabrication Operations Average Selling Prices and Volumes

Consolidated Results 2011 vs. 2010

        Selling, General and Administrative Expense (SG&A).    Selling, general and administrative expenses (including profit sharing and amortization of intangible assets) were $346.7 million during 2011, as compared to $298.1 million during 2010, an increase of $48.6 million, or 16%. During 2011 and 2010, selling, general and administrative expenses represented approximately 4% and 5% of net sales, respectively. The percentage decrease is primarily a result of increased net sales in 2011 compared with the prior year as measured against certain fixed cost components in selling, general and administrative expenses. The increase in SG&A expenses in 2011 compared to 2010 relates primarily to increased profit sharing expenses and incentive compensation, which together were $36.8 million more in 2011 than in 2010, in conjunction with company's increased profitability during 2011. Amortization of intangible assets decreased $5.6 million, or 12%, during 2011 compared to 2010 due to the accelerated amortization methods used for intangible assets related to customer and scrap generator relationships.

        Interest Expense, net of Capitalized Interest.    During 2011, gross interest expense increased $1.5 million, or 1%, to $178.7 million, and capitalized interest decreased $5.2 million, or 75%, to $1.7 million, as compared to 2010. The interest capitalization that occurred during these periods resulted from the interest required to be capitalized with respect to construction activities at our various operating segments, which were not as significant in 2011.

        Other (Income) Expense, net.    Other income, net was $16.5 million during 2011, as compared to $18.9 million during 2010, with interest income of $4.5 million in 2011 versus $4.1 million in 2010.

        Income Taxes.    During 2011, our income tax expense was $158.6 million, as compared to $83.9 million during 2010. Our effective income tax rate before noncontrolling interests was 37.4% and 39.3%, during 2011 and 2010, respectively. The lower effective income tax rate in 2011 is due primarily to additional permanent deductible items in 2011 and a reduction of the impact of noncontrolling interest losses due to the higher 2011 income.

        Included in the $64.6 million balance of unrecognized tax benefits at December 31, 2011 are potential benefits of $24.6 million that, if recognized, would affect the effective tax rate. In addition to the unrecognized tax benefits, we had $16.1 million accrued for the payment of interest and penalties at December 31, 2011. We recognize interest and penalties related to our tax contingencies on a net-of-tax

49

basis in income tax expense. During 2011, we recognized interest expense of $3.1 million, net of tax, and penalties of $35,000.

        We file income tax returns in the U.S. federal jurisdiction as well as income tax returns in various state jurisdictions. The Internal Revenue Service (IRS) is currently examining our federal income tax returns for the years 2004 through 2009. At this time we do not believe we will have any significant examination adjustments that would result in a material change to our financial position or results of operations. It is reasonably possible that the amount of unrecognized tax benefits could change in the next twelve months as a result of state and federal income tax audits. Based on the current audits in process, the payment of taxes as a result of audit settlements could be in an amount from zero to $2.3 million by the end of 2012. With few exceptions, including those discussed above, the company is no longer subject to federal, state and local income tax examinations by tax authorities for years ended before 2008.

Consolidated Results 2010 vs. 2009

        Net income was $140.7 million, or $0.64 per diluted share during 2010, compared with net loss of $8.2 million, or $0.04 per diluted share, in 2009. Net sales in 2010 increased $2.3 billion, or 59%, to $6.3 billion as compared to sales of $4.0 billion achieved during 2009, and our 2010 gross margin percentage was 11% during 2010 as compared to 10% during 2009. During 2010, we experienced improved net sales compared to 2009, driven by the general improvement of the domestic economy, resulting in increasing customer demand and pricing for our products.

        Steel operations experienced overall improved customer order volume (31%) and pricing ($112 per ton sold—17%), resulting in a 53% increase in sales in 2010, to $4.0 billion, as compared to 2009. The most impactful demand improvement in 2010 versus 2009 was in our sheet and special bar-quality steel products as the automotive, transportation, industrial, agricultural, and construction equipment markets showed signs of recovery. Our metallic raw material cost per ton consumed increased $107 per ton in 2010 as compared to 2009. As a result primarily of the improved volumes, our operating income in our steel operations for 2010 was up $243.6 million, or 124%, compared with that of 2009.

        Our metal recycling ferrous resources operations experienced improved shipping volumes of both ferrous (43%) and nonferrous (23%) metals and pricing in our metals recycling operations in 2010 as compared to 2009, as demand improved due in large part to domestic and international steel production utilization rates increasing as compared to 2009. As a result of much stronger metals recycling operations, as well as those of Iron Dynamics, operating income in our metals recycling and ferrous resources operations increased $24.4 million, to $19.7 million, compared with 2009. The construction of the Mesabi Nugget facility was completed in 2009, and initial production of iron nuggets commenced January 2010. During 2010, Mesabi Nugget produced 75,000 metric tons of iron-nuggets for use by our own steel mills. The Mesabi Nugget start-up losses reduced our net income by approximately $27.0 million in 2010 versus a reduction in net income of less than approximately $6.0 million in 2009, when the location was being constructed.

        Our steel fabrication operations sales increased 12% to $177.4 million in 2010 as compared to 2009, as volumes increased 13% and pricing decreased slightly in a down non-residential construction market. Operating losses in 2010 were $12.3 million (excluding a $12.8 million impairment charge), compared to $6.4 million in 2009, with the increased losses in 2010 due primarily to higher steel raw material costs per ton in 2010 as compared to 2009.

        Selling, General and Administrative Expenses.    Selling, general and administrative expenses (including profit sharing and amortization of intangible assets) were $298.1 million during 2010, as compared to $279.5 million during 2009, an increase of $18.6 million, or 7%. Our SG&A expenses represented 5% of our total net sales during 2010, compared to 7% during 2009. The lower percentage in 2010 is due primarily to the increase in net sales in 2010 compared with the prior years as measured

50

against certain fixed cost components in SG&A costs. The increase in SG&A expenses in 2010 compared to 2009 relates primarily to profit sharing expenses that were $22.5 million more in 2010 than in 2009, in conjunction with the increased profitability during 2010. Amortization of intangible assets decreased $8.0 million, or 15%, during 2010 compared to 2009 due to the finalization in 2009 of the amortization of certain finite-lived intangible assets related to the acquisition of Recycle South, and the accelerated amortization methods used for intangible assets related to customer and scrap generator relationships.

        Impairment Charges.    After the purchase of additional fabrication assets in the fourth quarter of 2010, and evaluating the future use of existing fabrication facilities, we determined that the carrying value of certain fixed assets at our idled South Carolina fabrication facility exceeded their fair value as determined utilizing market and cost approaches. The resulting impairment charge of $12.8 million was recorded within the steel fabrication reporting segment.

        Interest Expense, net of Capitalized Interest.    During 2010, gross interest expense increased $14.9 million to $177.2 million and capitalized interest decreased $13.9 million to $7.0 million, when compared to 2009. The increase in gross interest expense for 2011 compared to 2010 is primarily a result of our issuance of $350.0 million of 7⁵/8% senior notes due 2020, in March 2010. The interest capitalization that occurred during these periods resulted from the interest required to be capitalized with respect to construction activities at our various operating segments. The decrease in capitalized interest in 2010 as compared to 2009 was due primarily to the completion of construction at our Mesabi Nugget facility during the fourth quarter of 2009.

        Other (Income) Expense, net.    Other income, was $18.9 million during 2010, as compared to $3.6 million during 2009. We earned interest income of $4.1 million during 2010 versus $1.4 million in 2009. During 2009, the company terminated an interest rate swap contract and recorded other expense of $1.3 million.

        Income Taxes.    During 2010, our income tax expense was $83.9 million, as compared to income tax benefit of $7.2 million during 2009. Our effective income tax rate before noncontrolling interests was 39.3% and 39.6%, during 2010 and 2009, respectively.

Liquidity and Capital Resources

        Our business is capital intensive and requires substantial expenditures for, among other things, the purchase and maintenance of equipment used in our steelmaking and finishing operations and to remain in compliance with environmental laws. Our short-term and long-term liquidity needs arise primarily from capital expenditures, working capital requirements, principal and interest payments related to our outstanding indebtedness, and dividends. We have met these liquidity requirements with cash provided by operations, issuances of common stock, long-term borrowings and state and local grants.

        Working Capital.    During 2011, our operational working capital position, representing amounts invested in trade receivables and inventories, less current liabilities other than income taxes payable and debt, increased $87.8 million to $1.3 billion compared to December 31, 2010. Trade receivables, of which over 98% were current or less than 60 days past due, increased $100.6 million, or 16%, during 2011 to $722.8 million. Our largest customer is an affiliated company, Heidtman Steel, which represented 5% of our outstanding trade receivables at December 31, 2011, and December 31, 2010. Trade receivables increased during 2011 due to increased sales from higher product prices and volumes in the fourth quarter of 2011 as compared to the fourth quarter of 2010, as days sales outstanding has remained consistent. Total inventories increased in 2011 by $85.5 million, or 8%, to $1.2 billion at December 31, 2011. Work-in-process and finished goods inventories increased $46.3 million, with steel volumes increasing by 42,000 tons. Our trade payables and general accruals increased $98.3 million, or 18%,

51

during 2011. The increase in trade payables is a reflection of the increased production activities and commodity raw material pricing and purchasing prior to December 31, 2011, compared to that at December 31, 2010. The increase in general accruals is due primarily to the increase in accrued profit sharing and incentive compensation due to the increased profitability during 2011 when compared to 2010.

        Capital Investments.    During 2011, we invested $167.0 million in property, plant and equipment, of which $44.0 million was within our steel operations and $103.1 million related to our metals recycling and ferrous resource operations. We believe these capital investments will benefit our net sales and related cash flows as each project reaches completion and attains appropriate operational metrics. Our current estimated 2012 cash allocation plan includes the investment of between $225.0 and $250.0 million in capital expenditures in our existing and announced operations.

        Capital Resources and Long-term Debt.    During 2011, our total outstanding debt decreased $6.7 million to $2.4 billion. Our total long-term debt to capitalization ratio, representing our long-term debt, including current maturities, divided by the sum of our long-term debt, redeemable noncontrolling interest, and total stockholders' equity, was 50.1% at December 31, 2011, as compared to 52.8% at December 31, 2010.

        In September 2011, the company entered into a new five-year senior secured revolving credit facility (Facility) which provides up to $1.1 billion of available borrowing in the form of a revolver, with the original option to increase that level by an additional $400.0 million, however after issuing a $275.0 million term loan in January 2012, the expansion amount is now $125.0 million. The revolver is available to fund working capital, capital expenditures, and other general corporate purposes. The Facility is guaranteed by certain of the company's subsidiaries; and is secured by substantially all of the company's and its wholly-owned subsidiaries' receivables and inventories, and by pledges of all shares of the company's wholly-owned subsidiaries' capital stock. On January 11, 2012, the company expanded the Facility by adding a $275.0 million term loan that matures on September 30, 2016 (Term Loan). Quarterly principal payments under the Term Loan are required to be made in amounts ranging from 1.25% to 3.75% of the original principal amount, with the unpaid principal balance of approximately $158.0 million due on the maturity date. The company used the proceeds of the Term Loan, together with cash on hand, to fund the January 2012 purchase of $279.7 million of the company's 7³/8% Senior Notes due 2012. We executed the partial tender offer for our $700.0 million 7³/8% senior notes due November 2012 in order to mitigate a portion of the refinancing risk later in the year. Nearly 40% of the holders offered their notes in the tender.

        The company's revolver must be the lesser of $1.1 billion less other applicable commitments such as letters of credit and other secured debt, as defined within the Facility or the sum of 85% of the company's eligible accounts receivable and 65% of the company's eligible inventories, less other applicable commitments. At December 31, 2011, the company had $1.1 billion of availability on the revolver, $16.5 million of outstanding letters of credit and other obligations which reduce availability, and there were no borrowings outstanding.

        The Facility contains financial covenants and other covenants that limit or restrict our ability to make capital expenditures; incur indebtedness; permit liens on property; enter into transactions with affiliates; make restricted payments or investments; enter into mergers, acquisitions or consolidations; conduct asset sales; pay dividends or distributions and enter into other specified transactions and activities. Our ability to borrow funds within the terms of the revolver is dependent upon our continued compliance with the financial and other covenants.

        The financial covenants under our Facility state that we must maintain an interest coverage ratio of not less than 2.50:1.00. Our interest coverage ratio is calculated by dividing our last-twelve trailing months (LTM) consolidated adjusted EBITDA (earnings before interest, taxes, depreciation,

52

amortization, and certain other non-cash transactions as allowed in our Facility) by our LTM gross interest expense. We must also maintain minimum liquidity through maturity or repayment of our 7³/8% senior notes, due 2012. The minimum liquidity covenant required is determined by the sum of unrestricted cash and revolver availability as defined in the credit agreement, being at least $150.0 million plus the outstanding amount of the $700.0 million senior notes due 2012, which was $850 million at December 31, 2011, and $570.3 million after the January 2012 partial tender. In addition, a net debt (as defined in the credit agreement) to consolidated LTM adjusted EBITDA ratio (leverage ratio) of not more than 5.00:1.00 must be maintained. If the net debt to EBITDA ratio exceeds 3.50:1:00 at any time, our ability to make restricted payments as defined in the credit agreement (which includes cash dividends to stockholders and share purchases, among other things), is limited. At December 31, 2011, our interest coverage ratio and net debt leverage ratio were 4.92:1.00 and 2.36:1.00, respectively, and our minimum liquidity is almost $1.6 billion. We were therefore in compliance with these covenants at December 31, 2011, and we anticipate we will remain in compliance during 2012.

        Cash Dividends.    We declared cash dividends of $87.5 million, or $0.40 per common share ($0.10 per common share each quarter), during 2011 and $65.1 million, or $0.30 per common share ($0.075 per common share per quarter), during 2010. We paid cash dividends of $81.9 million and $65.0 million during 2011 and 2010, respectively. Our board of directors, along with executive management, approves the payment of dividends on a quarterly basis. The determination to pay cash dividends in the future will be at the discretion of our board of directors, after taking into account various factors, including our financial condition, results of operations, outstanding indebtedness, current and anticipated cash needs and growth plans. In addition, the terms of our senior secured revolving credit agreement and the indentures relating to our senior notes restrict the amount of cash dividends we can pay.

        Other.    Our ability to meet our debt service obligations and reduce our total debt will depend upon our future performance which, in turn, will depend upon general economic, financial and business conditions, along with competition, legislation and regulatory factors that are largely beyond our control. In addition, we cannot assure you that our operating results, cash flow, access to credit markets and capital resources will be sufficient for repayment of our indebtedness in the future. We believe that, based upon current levels of operations and anticipated growth, cash flow from operations, together with other available sources of funds, including additional borrowings under our senior secured credit facility through its term, which expires in September 2016, will be adequate for the next twelve months for making required payments of principal and interest on our indebtedness, funding working capital requirements, and anticipated capital expenditures.

        During 2011, we received benefits from state and local governments in the form of real estate and personal property tax abatements and credits of approximately $5.2 million. Based on our current abatements and incentive credits, and utilizing our existing long-lived asset structure, we estimate the remaining annual benefit to our future operations to be approximately $4.1 million, $2.7 million, $2.2 million, $1.8 million, $680,000, $470,000, and $260,000 during the years 2012 through 2018, respectively.

53

Contractual Obligations and Other Long-Term Liabilities

        We have the following minimum commitments under contractual obligations, including purchase obligations, as defined by the U.S. Securities and Exchange Commission. A "purchase obligation" is defined as an agreement to purchase goods or services that is enforceable and legally binding and that specifies all significant terms, including fixed or minimum quantities to be purchased; fixed, minimum or variable price provisions; and the approximate timing of the transaction. Other long-term liabilities are defined as long-term liabilities that are reflected on our balance sheet under generally accepted accounting principles. Based on this definition, the following table includes only those contracts which include fixed or minimum obligations. It does not include normal purchases, which are made in the ordinary course of business. The following table provides aggregated information about outstanding contractual obligations and other long-term liabilities as of December 31, 2011 (in thousands):

	Payments Due By Period
	Total		2012		2013 & 2014		2015 & 2016		2017 & After
Long-term debt (1)	$	2,380,100	$	444,078	$	334,881	$	1,226,882	$	374,259
Estimated interest payments on debt (2)		612,898		151,474		240,913		128,124		92,387
Purchase obligations (3)		142,998		122,705		11,974		3,122		5,197
Construction commitments (4)		32,792		32,792		—		—		—
Lease commitments		41,366		11,874		15,507		8,479		5,506
Other commitments (5)		5,436		634		1,152		1,050		2,600
Total (6)	$	3,215,590	$	763,557	$	604,427	$	1,367,657	$	479,949

(1)

The long-term debt payment information presented above assumes that our senior notes and convertible senior notes remain outstanding until maturity. It also takes into consideration the effects of the $279.7 million cash tender for a portion of the $700.0 million 7³/8% senior notes and issuance of a $275.0 million term loan, in January 2012. Refer to Note 2 to the consolidated financial statements elsewhere in this report for additional information regarding these transactions, and our long-term debt.

(2)

The estimated interest payments shown above assume interest rates of 7³/8% on our $700.0 million senior unsecured notes due November 2012; 2.0% (variable rate at issuance) on the $275.0 million term loan issued January 2012 maturing in September 2016; 5.125% on our $287.5 million convertible senior notes due June 2014; 6³/4% on our $500.0 million senior unsecured notes due April 2015; 7³/4% on our $500.0 million senior unsecured notes due April 2016; 7⁵/8% on our $350.0 million senior unsecured notes due March 2020; 0.35% commitment fee on our available senior secured revolver; and an average of 5.2% on our other debt of $42.6 million.

(3)

Purchase obligations include commitments we have for the purchase of electricity, fuel, iron concentrate, natural gas and its transportation, and zinc. These arrangements have "take or pay" or other similar commitment provisions. We have utilized such "take or pay" requirements during the past three years under these contracts.

(4)

Construction commitments relate to firm contracts we have with various vendors for the completion of certain construction projects at our various divisions at December 31, 2011.

(5)

Other commitments principally relate to certain pension and deferred compensation plan obligations.

(6)

We expect to make cash outlays in the future related to our unrecognized tax benefits; however, due to the uncertainty of the timing, we are unable to make reasonably reliable estimates regarding the period of cash settlement with the respective taxing authorities. Accordingly, unrecognized tax benefits and related interest and penalties of $80.7 million as of December 31, 2011, have been excluded from the contractual obligations table above. Refer to Note 3 to the consolidated financial statements elsewhere in this report for additional information.

54

Other Matters

Inflation

        We believe that inflation has not had a material effect on our results of operations.

Environmental and Other Contingencies

        We have incurred, and in the future will continue to incur, capital expenditures and operating expenses for matters relating to environmental control, remediation, monitoring and compliance. During 2011, we incurred costs related to the monitoring and compliance of environmental matters in the amount of approximately $35.2 million and capital expenditures related to environmental compliance of approximately $1.1 million. Over 87% of the costs incurred during 2011 for monitoring and compliance were related to the normal transportation of certain types of waste produced in the steelmaking process in accordance with legal requirements. We incurred combined environmental remediation costs of approximately $230,000 at all of our facilities during 2011. We have an accrual of $2.0 million (net of $1.5 million of escrowed funds) recorded for environmental remediation related to our metals recycling operations and $2.9 million related to Mesabi Nugget and Mesabi Mining. We believe, apart from our dependence on environmental construction and operating permits for our existing and proposed manufacturing facilities, that compliance with current environmental laws and regulations is not likely to have a materially adverse effect on our financial condition, results of operations or liquidity; however, environmental laws and regulations have changed rapidly in recent years, and we may become subject to more stringent environmental laws and regulations in the future, such as the impact of United States government or various governmental agencies introducing regulatory changes in response to the potential of climate change.

Critical Accounting Policies and Estimates

        Management's discussion and analysis of our financial condition and results of operations is based upon our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States. We review the accounting policies we use in reporting our financial results on a regular basis. The preparation of these financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses and related disclosure of contingent assets and liabilities. We evaluate the appropriateness of these estimations and judgments on an ongoing basis. We base our estimates on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Results may differ from these estimates due to actual outcomes being different from those on which we based our assumptions. We believe the following critical accounting policies affect our more significant judgments and estimates used in the preparation of our consolidated financial statements.

        Revenue Recognition and Allowance for Doubtful Accounts.    Except for our steel fabrication operations segment, we recognize revenues from sales and the allowance for estimated returns from these sales when the title of the product transfers upon shipment. Provision is made for estimated product returns and customer claims based on estimates and actual historical experience. If the historical data used in our estimates does not reflect future returns and claims trends, additional provision may be necessary. Our steel fabrication operations segment recognizes revenues from construction contracts using a percentage of completion methodology based on steel tons used on completed units to date as a percentage of estimated total steel tons required by each contract. Steel fabrication operations accounted for 3%, 3%, and 4% of our net sales in 2011, 2010, and 2009, respectively.

55

        We are exposed to credit risk in the event of nonpayment by our customers, which in steel operations are principally intermediate steel processors and service centers that sell our products to numerous industry sectors, including the automotive, agriculture, construction, commercial, transportation and industrial machinery markets. Our metals recycling operations sell ferrous metals to steel mills and foundries, and nonferrous metals, such as copper, brass, aluminum and stainless steel to, among others, ingot manufacturers, copper refineries and mills, smelters, and specialty mills. We maintain an allowance for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments based on known credit risks, historical loss experience and current economic conditions affecting our customers. We mitigate our exposure to credit risk by performing ongoing credit evaluations and taking further action when necessary, such as requiring letters of credit or other security interests to support the receivable from our customer. If the financial condition of our customers were to deteriorate, resulting in the impairment of their ability to make payments, additional allowance may be required.

        Inventories.    We record inventories at lower of cost or market. Cost is determined principally on a first-in, first-out, basis.

        Impairments of Long-Lived Tangible and Finite-Lived Intangible Assets.    We review long-lived assets for impairment whenever events or changes in circumstances indicate the carrying amount of such assets may not be recoverable. Impairment losses are recorded on long-lived assets used in operations when indicators of impairment are present and the undiscounted cash flows estimated to be generated by those assets are less than the assets' carrying amounts. The impairment loss is measured by comparing the fair value of the asset to its carrying amount. We consider various factors and determine whether an impairment test is necessary, including by way of examples, a significant and prolonged deterioration in operating results and projected cash flows, significant changes in the extent or manner in which an asset is used, technological advances with respect to assets which would potentially render them obsolete, our strategy and capital planning, and the economic climate in markets to be served.

        After the purchase of additional fabrication assets in the fourth quarter of 2010 and determining the future use of existing fabrication facilities, the company determined that the carrying value of certain fixed assets at its idled South Carolina fabrication facility exceeded their fair value as determined utilizing market and cost approaches. The resulting impairment charge of $12.8 million was recorded within the steel fabrications reporting segment in 2010.

Goodwill and Other Indefinite-Lived Intangible Assets.

        Our goodwill relates to various business combinations, and is allocated to the following reporting units at December 31(in thousands):

	2011		2010
OmniSource—Metals Recycling/Ferrous Resources Segment	$	571,317	$	577,926
The Techs—Steel Segment		142,783		142,783
Roanoke Bar Division—Steel Segment		29,041		29,041
New Millennium Building Systems—Steel Fabrication Segment		1,925		1,925
	$	745,066	$	751,675

        At least once annually or when indicators of impairment exist, we perform an impairment test for goodwill. Goodwill is allocated to various reporting units, which are generally one level below our operating segments. We utilize a two-stepped approach to measuring goodwill impairment. The first step of the test determines if there is potential goodwill impairment. In this step we compare the fair value of the reporting unit to its carrying amount (which includes goodwill). The fair value of the reporting unit is determined by using an estimate of future cash flows utilizing a risk-adjusted discount

56

rate to calculate the net present value of future cash flows, and assessing its reasonableness by using a market approach based upon an analysis of valuation metrics of comparable peer companies. If the carrying amount exceeds the fair value, we perform the second step of the test, which measures the amount of impairment loss to be recorded, if any. In the second step, we compare the carrying amount of the goodwill to the implied fair value of the goodwill based on the net fair value of the recognized and unrecognized assets and liabilities of the reporting unit. If the implied fair value is less than the carrying value, an impairment loss is recorded to the extent that the fair value of the goodwill is less than its carrying value.

        Key assumptions used to determine the estimated fair value of each reporting unit under the discounted cash flows method include: (a) expected cash flows for the five-year period following the testing date (including market share, sales volumes and prices, costs to produce and estimated capital needs); (b) an estimated terminal value using a terminal year growth rate determined based on the growth prospects of the reporting unit; and (c) a discount rate based on management's best estimate of the after-tax weighted average cost of capital. Management considers historical and anticipated future results, general economic and market conditions, the impact of planned business and operational strategies and all available information at the time the fair values of its reporting units are estimated.

        Goodwill and other intangible assets acquired in recent transactions are naturally more susceptible to impairment, primarily due to the fact that they are recorded at fair value based on recent operating plans and economic conditions present at the time of acquisition. Consequently, if operating results and/or economic conditions deteriorate shortly after an acquisition, it could result in the impairment of the acquired assets. A deterioration of economic conditions may not only negatively impact the estimated operating cash flows used in our cash flow models, but may also negatively impact other assumptions used in our analyses, including, but not limited to, the estimated cost of capital and/or discount rates. Additionally, we are required to ensure that assumptions used to determine fair value in our analyses are consistent with the assumptions a hypothetical marketplace participant would use. As a result, the cost of capital and/or discount rates used in our analyses may increase or decrease based on market conditions and trends, regardless of whether our actual cost of capital has changed. Therefore, we may recognize an impairment of an intangible asset or assets in spite of realizing actual cash flows that are approximately equal to or greater than our previously forecasted amounts.

        Our other indefinite-lived intangible assets relate to trademarks acquired through various business combinations and is allocated to the following reporting units at December 31, 2011 and 2010 (in thousands):

OmniSource—Metals Recycling/Ferrous Resources Segment	$	108,000
The Techs—Steel Segment		81,800
	$	189,800

        At least annually or when indicators of impairment exist, we perform an impairment test for indefinite-lived intangible assets through the comparison of the fair value of the specific intangible asset with its carrying amount. The fair value of the intangible asset is determined by using an estimate of future cash flows attributable to the asset and a risk-adjusted discount rate to compute a net present value of future cash flows. If the fair value is less than the carrying value, an impairment loss is recorded in an amount equal to the excess in carrying value.

        Our fourth quarter 2011 annual goodwill and indefinite-lived intangible asset impairment analyses did not result in any impairment charges. Management does not believe that it is reasonably likely that our reporting units will fail step one of a goodwill impairment test in the near term. The OmniSource reporting unit's fair value exceeded its carrying value by more than 10%, however our analysis contemplates performance improvements similar to historical levels. The discount rate used in the analysis is a critical assumption, one in which a minor change can have a significant impact on the

57

estimated fair value. A 100 basis point increase in the discount rate used in the OmniSource analysis would not result in an impairment charge for the reporting unit. We will continue to monitor operating results within all reporting units throughout the upcoming year in an effort to determine if events and circumstances warrant further interim impairment testing. Otherwise, all reporting units will again be subject to the required annual impairment test during the fourth quarter of 2012. Changes in judgments and estimates underlying our analysis of goodwill for possible impairment, including expected future operating cash flows and discount rate, could decrease the estimated fair value of our reporting units in the future and could result in an impairment of goodwill and indefinite-lived intangible assets.

        Income Taxes.    We are required to estimate our income taxes as a part of the process of preparing our consolidated financial statements. This requires us to estimate our actual current tax exposure together with assessing temporary differences resulting from differing treatments of items for tax and accounting purposes. These differences result in deferred tax assets and liabilities, which are included within our consolidated balance sheet. We must then assess the likelihood that our deferred tax assets will be recovered from future taxable income and, to the extent we believe that recovery is not likely, we must establish a valuation allowance. We establish reserves to reduce some or all of the tax benefit of any of our tax positions at the time we determine that the positions become uncertain. We adjust these reserves, including any impact on the related interest and penalties, in light of changing facts and circumstances, such as the progress of a tax audit. A number of years may elapse before a particular matter for which we have established a reserve is audited and finally resolved. The number of years with open tax audits varies depending on the tax jurisdiction. The tax benefit that has been previously reserved because of a failure to meet the "more likely than not" recognition threshold would be recognized in our income tax expense in the first interim period when the uncertainty disappears. Settlement of any particular issue would usually require the use of cash.

58

ITEM 7A.    QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Market Risk

        In the normal course of business, we are exposed to interest rate changes. Our objectives in managing exposure to interest rate changes are to limit the impact of these rate changes on earnings and cash flows and to lower overall borrowing costs. To achieve these objectives, we primarily use interest rate swaps to manage net exposure to interest rate changes related to our portfolio of borrowings.

        The following table represents the principal cash repayments and related weighted-average interest rates by maturity date for our long-term debt as of December 31, 2011, taking into consideration the effects of the $279.7 million cash tender for a portion of the $700.0 million 7³/8% senior notes and issuance of a $275.0 million term loan, both in January 2012, (in thousands):

	Interest Rate Risk
	Fixed Rate					Variable Rate
	Principal		Average Rate			Principal		Average Rate
Expected maturity date:
2012	$	429,325		7.4	%	$	14,753		2.1	%
2013		2,017		4.3			14,753		2.1
2014		289,608		5.1			28,503		2.0
2015		502,168		6.7			42,253		2.0
2016		502,214		7.7			180,247		2.0
Thereafter		374,259		7.5			—
Total	$	2,099,591		7.0	%	$	280,509		2.0	%
Fair value	$	2,199,955				$	280,509

Commodity Risk

        In the normal course of business we are exposed to the market risk and price fluctuations related to the sale of our products and to the purchase of raw materials used in our operations, such as metallic raw materials, electricity, natural gas, iron concentrate, fuel, and zinc. Our risk strategy associated with product sales has generally been to obtain competitive prices for our products and to allow operating results to reflect market price movements dictated by supply and demand.

        Our risk strategy associated with the purchase of raw materials utilized within our operations has generally been to make some commitments with suppliers relating to future expected requirements for some commodities such as electricity, natural gas and its transportation, fuel, and zinc. Certain of these commitments contain provisions which require us to "take or pay" for specified quantities without regard to actual usage for periods of up to 24 months for physical commodity requirements and for up to 9 years for commodity transportation requirements. Our commitments for these arrangements with

59

"take or pay" or other similar commitment provisions for the years ending December 31 are as follows (in thousands):

2012	$	122,705
2013		10,237
2014		1,737
2015		1,561
2016		1,561
Thereafter		5,197
	$	142,998

        We utilized such "take or pay" requirements during the past three years under these contracts. We believe that production requirements will be such that consumption of the products or services purchased under these commitments will occur in the normal production process. We also purchase electricity consumed at our Flat Roll Division pursuant to a contract which extends through December 2012. The contract designates 160 hours annually as "interruptible service" and establishes an agreed fixed-rate energy charge per Mill/kWh consumed for each year through the expiration of the agreement.

        In our metals recycling operations we have certain fixed price contracts with various customers and suppliers for future delivery of nonferrous metals. Our risk strategy has been to enter into base metal financial contracts with the goal to protect the profit margin, within certain parameters, that was contemplated when we entered into the transaction with the customer or vendor. At December 31, 2011, we had a cumulative unrealized loss associated with these financial contracts of $1.2 million, substantially all of which have a settlement date in 2012. We believe the customer contracts associated with the financial contracts will be fully consummated.

60

ITEM 8.    CONSOLIDATED FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

	Page
Management's Report on Internal Control Over Financial Reporting		62
Reports of Independent Registered Public Accounting Firm		63
Consolidated Balance Sheets as of December 31, 2011 and 2010		65
Consolidated Statements of Operations for each of the three years in the period ended December 31, 2011		66
Consolidated Statements of Equity for each of the three years in the period ended December 31, 2011		67
Consolidated Statements of Cash Flows for each of the three years in the period ended December 31, 2011		68
Notes to Consolidated Financial Statements		69

61

MANAGEMENT'S REPORT ON INTERNAL CONTROL OVER FINANCIAL REPORTING

        The management of Steel Dynamics, Inc. is responsible for the preparation and integrity of the company's consolidated financial statements and for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Rule 13a-15(f) of the Exchange Act, for the company (including its consolidated subsidiaries). We maintain accounting and internal control systems which are intended to provide reasonable assurance that assets are safeguarded against loss from unauthorized use or disposition, transactions are executed in accordance with management's authorization, and accounting records are reliable for preparing financial statements in accordance with accounting principles generally accepted in the United States. We are dedicated to ensuring that we maintain the high standards of financial accounting and reporting that we have established. Our culture demands integrity and an unyielding commitment to strong internal control practices and policies.

        Internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of our assets; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of the financial statements in accordance with U.S. generally accepted accounting principles; (3) provide reasonable assurance that our receipts and expenditures are being made only in accordance with authorizations of our management and directors; and (4) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of our assets that could have a material effect on our financial statements.

        Because of its inherent limitations, internal control over financial reporting may not always prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with policies and procedures may deteriorate.

        Under the supervision and with the participation of our management, including our principal executive officer and our principal financial officer, we conducted an evaluation of the effectiveness of our internal control over financial reporting. The framework on which such evaluation was based upon is contained in the report entitled "Internal Control—Integrated Framework" issued by the Committee of Sponsoring Organizations of the Treadway Commission (the "COSO Report"). Based on that evaluation, management concluded that our internal control over financial reporting was effective as of December 31, 2011, the end of the period covered by this report.

/s/ MARK D. MILLETT
Chief Executive Officer /s/ THERESA E. WAGLER
Chief Financial Officer

62

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders of
Steel Dynamics, Inc.

        We have audited Steel Dynamics, Inc.'s internal control over financial reporting as of December 31, 2011, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (the COSO criteria). Steel Dynamics, Inc.'s management is responsible for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management's Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the company's internal control over financial reporting based on our audit.

        We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

        A company's internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company's internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company's assets that could have a material effect on the financial statements.

        Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

        In our opinion, Steel Dynamics, Inc. maintained, in all material respects, effective internal control over financial reporting as of December 31, 2011, based on the COSO criteria.

        We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Steel Dynamics, Inc. as of December 31, 2011 and 2010, and the related consolidated statements of operations, equity, and cash flows for each of the three years in the period ended December 31, 2011 of Steel Dynamics, Inc. and our report dated February 27, 2012 expressed an unqualified opinion thereon.

/s/ Ernst & Young LLP
Indianapolis, Indiana
February 27, 2012

63

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders of
Steel Dynamics, Inc.

        We have audited the accompanying consolidated balance sheets of Steel Dynamics, Inc. as of December 31, 2011 and 2010, and the related consolidated statements of operations, equity, and cash flows for each of the three years in the period ended December 31, 2011. These financial statements are the responsibility of the company's management. Our responsibility is to express an opinion on these financial statements based on our audits.

        We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

        In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of Steel Dynamics, Inc. at December 31, 2011 and 2010, and the consolidated results of its operations and its cash flows for each of the three years in the period ended December 31, 2011, in conformity with U.S. generally accepted accounting principles.

        We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Steel Dynamics, Inc.'s internal control over financial reporting as of December 31, 2011, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated February 27, 2012 expressed an unqualified opinion thereon.

/s/ Ernst & Young LLP
Indianapolis, Indiana
February 27, 2012

64

STEEL DYNAMICS, INC.

CONSOLIDATED BALANCE SHEETS

(in thousands, except share data)

	December 31,
	2011			2010
Assets
Current assets
Cash and equivalents	$	390,761		$	186,513
Investments in short-term commercial paper		84,830			—
Accounts receivable, net of related allowances of $18,303 and $19,936 as of December 31, 2011 and 2010, respectively		679,898			584,068
Accounts receivable-related parties		42,893			38,121
Inventories		1,199,584			1,114,063
Deferred income taxes		25,341			20,684
Income taxes receivable		16,722			37,311
Other current assets		15,229			19,243
Total current assets		2,455,258			2,000,003
Property, plant and equipment, net		2,193,745			2,213,333
Restricted cash		26,528			23,132
Intangible assets, net of accumulated amortization of $181,227 and $142,880 as of December 31, 2011 and 2010, respectively		450,893			489,240
Goodwill		745,066			751,675
Other assets		107,736			112,551
Total assets	$	5,979,226		$	5,589,934
Liabilities and Equity
Current liabilities
Accounts payable	$	414,240		$	335,031
Accounts payable-related parties		6,584			13,570
Income taxes payable		10,880			5,227
Accrued payroll and benefits		68,752			62,051
Accrued profit sharing		38,671			23,524
Accrued interest		36,265			35,416
Accrued expenses		80,947			77,574
Current maturities of long-term debt		444,078			8,924
Total current liabilities		1,100,417			561,317
Long-term debt
73/8% senior notes, due 2012		261,250			700,000
5.125% convertible senior notes, due 2014		287,500			287,500
63/4% senior notes, due 2015		500,000			500,000
73/4% senior notes, due 2016		500,000			500,000
75/8% senior notes, due 2020		350,000			350,000
Other long-term debt		37,272			40,397
Total long-term debt		1,936,022			2,377,897
Deferred income taxes		489,915			457,432
Other liabilities		82,278			62,159
Commitments and contingencies
Redeemable noncontrolling interests		70,694			54,294
Equity
Common stock voting, $.0025 par value; 900,000,000 shares authorized; 255,052,811 and 254,002,799 shares issued; and 218,873,720 and 217,574,826 shares outstanding, as of December 31, 2011 and 2010, respectively		636			633
Treasury stock, at cost; 36,179,091 and 36,427,973 shares, as of December 31, 2011, and 2010, respectively		(722,653	)		(727,624	)
Additional paid-in capital		1,026,157			998,728
Retained earnings		2,011,801			1,821,133
Total Steel Dynamics, Inc. equity		2,315,941			2,092,870
Noncontrolling interests		(16,041	)		(16,035	)
Total equity		2,299,900			2,076,835
Total liabilities and equity	$	5,979,226		$	5,589,934

See notes to consolidated financial statements.

65

STEEL DYNAMICS, INC.

CONSOLIDATED STATEMENTS OF OPERATIONS

(in thousands, except per share data)

	Years Ended December 31,
	2011			2010			2009
Net sales
Unrelated parties	$	7,718,714		$	6,060,933		$	3,810,378
Related parties		278,786			239,954			148,428
Total net sales		7,997,500			6,300,887			3,958,806
Costs of goods sold		7,065,982			5,625,221			3,559,730
Gross profit		931,518			675,666			399,076
Selling, general and administrative expenses		263,595			227,046			223,013
Profit sharing		43,149			25,476			2,980
Amortization of intangible assets		39,954			45,586			53,552
Impairment charges		—			12,805			—
Operating income		584,820			364,753			119,531
Interest expense, net of capitalized interest		176,977			170,229			141,360
Other income, net		(16,476	)		(18,935	)		(3,592	)
Income (loss) before income taxes		424,319			213,459			(18,237	)
Income taxes (benefit)		158,627			83,860			(7,218	)
Net income (loss)		265,692			129,599			(11,019	)
Net loss attributable to noncontrolling interests		12,428			11,110			2,835
Net income (loss) attributable to Steel Dynamics, Inc.	$	278,120		$	140,709		$	(8,184	)
Basic earnings (loss) per share attributable to Steel Dynamics, Inc. stockholders	$	1.27		$	.65		$	(.04	)
Weighted average common shares outstanding		218,471			216,760			200,704
Diluted earnings (loss) per share attributable to Steel Dynamics, Inc. stockholders, including the effect of assumed conversions when dilutive	$	1.22		$	.64		$	(.04	)
Weighted average common shares and share equivalents outstanding		235,992			234,717			200,704
Dividends declared per share	$	.400		$	.300		$	.325

See notes to consolidated financial statements.

66

STEEL DYNAMICS, INC.

CONSOLIDATED STATEMENTS OF EQUITY

(in thousands)

	Shares												Other Accumulated Comprehensive Income (Loss)
						Common Stock		Additional Paid-In Capital		Retained Earnings						Noncontrolling Interests			Treasury Stock
	Common		Treasury																			Total
Balances at January 1, 2009		181,820		36,913		$	545	$	541,686	$	1,820,385		$	(1,411	)	$	8,427		$	(737,319	)	$	1,632,313
Issuance of common stock (net of expenses) and proceeds from exercise of stock options, including related tax effect		33,857		—			84		420,846		—			—			—			—			420,930
Dividends declared		—		—			—		—		(66,690	)		—			—			—			(66,690	)
Contributions from noncontrolling investors		—		—			—		—		—			—			5,000			—			5,000
Change in noncontrolling investment		—		—			—		—		—			—			2,366			—			2,366
Tax adjustment to noncontrolling interests		—		—			—		—		—			—			2,039			—			2,039
Equity-based compensation		323		(323	)		—		10,453		—			—			—			6,462			16,915
Comprehensive loss:
Net loss		—		—			—		—		(8,184	)		—			(2,835	)		—			(11,019	)
Reversal of unrealized loss on interest rate swap, net of tax of $883		—		—			—		—		—			1,411			—			—			1,411
Total comprehensive loss																							(9,608	)
Balances at December 31, 2009		216,000		36,590			629		972,985		1,745,511			—			14,997			(730,857	)		2,003,265
Proceeds from exercise of stock options, including related tax effect		1,413		—			4		14,010		—			—			—			—			14,014
Dividends declared		—		—			—		—		(65,087	)		—			—			—			(65,087	)
Contributions from noncontrolling investors		—		—			—		—		—			—			5,348			—			5,348
Transfer to redeemable noncontrolling interest		—		—			—		—		—			—			(23,800	)		—			(23,800	)
Tax adjustment to noncontrolling interests		—		—			—		—		—			—			(1,470	)		—			(1,470	)
Equity-based compensation		162		(162	)		—		11,733		—			—			—			3,233			14,966
Comprehensive income and net income (loss)		—		—			—		—		140,709			—			(11,110	)		—			129,599
Balances at December 31, 2010		217,575		36,428			633		998,728		1,821,133			—			(16,035	)		(727,624	)		2,076,835
Proceeds from exercise of stock options, including related tax effect		1,050		—			3		13,393		—			—			—			—			13,396
Dividends declared		—		—			—		—		(87,452	)		—			—			—			(87,452	)
Contributions from noncontrolling investors		—		—			—		—		—			—			12,989			—			12,989
Distributions to noncontrolling investor		—		—			—		—		—			—			(567	)		—			(567	)
Equity-based compensation		249		(249	)				14,036		—			—			—			4,971			19,007
Comprehensive income and net income (loss)		—		—			—		—		278,120			—			(12,428	)		—			265,692
Balances at December 31, 2011		218,874		36,179		$	636	$	1,026,157	$	2,011,801		$	—		$	(16,041	)	$	(722,653	)	$	2,299,900

See notes to consolidated financial statements.

67

STEEL DYNAMICS, INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

(in thousands)

	Years Ended December 31,
	2011			2010			2009
Operating activities:
Net income (loss)	$	265,692		$	129,599		$	(11,019	)
Adjustments to reconcile net income (loss) to net cash provided by operating activities:
Depreciation and amortization		222,607			224,698			221,426
Impairment charges		—			12,805			—
Equity-based compensation		17,283			14,688			17,589
Deferred income taxes		34,436			46,097			92,596
(Gain) loss on disposal of property, plant and equipment		(3,925	)		1,215			839
Changes in certain assets and liabilities:
Accounts receivable		(100,602	)		(196,556	)		72,159
Inventories		(85,523	)		(261,110	)		175,183
Other assets		5,683			(15,335	)		4,076
Accounts payable		56,551			71,169			(8,860	)
Income taxes receivable/payable		26,242			99,276			1,611
Accrued expenses		47,911			42,761			(120,044	)
Net cash provided by operating activities		486,355			169,307			445,556
Investing activities:
Purchases of property, plant and equipment		(167,007	)		(133,394	)		(330,052	)
Investments in short-term commercial paper		(84,830	)		—			—
Investment in direct financing lease		—			—			(27,967	)
Other investing activities		16,000			(15,684	)		(15,926	)
Net cash used in investing activities		(235,837	)		(149,078	)		(373,945	)
Financing activities:
Issuance of current and long-term debt		10,103			556,553			1,268,435
Repayments of current and long-term debt		(7,740	)		(346,963	)		(1,690,557	)
Issuance of common stock (net of expenses) and proceeds from exercise of stock options, including related tax effect		13,396			14,014			420,930
Contributions from noncontrolling investors		27,389			5,348			5,000
Distributions to noncontrolling investor		(567	)		—			—
Dividends paid		(81,882	)		(64,969	)		(68,672	)
Debt issuance costs		(6,969	)		(6,707	)		(13,972	)
Net cash provided by (used in) financing activities		(46,270	)		157,276			(78,836	)
Increase (decrease) in cash and equivalents		204,248			177,505			(7,225	)
Cash and equivalents at beginning of year		186,513			9,008			16,233
Cash and equivalents at end of year	$	390,761		$	186,513		$	9,008

See notes to consolidated financial statements.

68

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Note 1. Description of the Business and Summary of Significant Accounting Policies

Description of the Business

        Steel Dynamics, Inc. (SDI), together with its subsidiaries (the company), is a domestic manufacturer of steel products and metals recycler. The company has three reporting segments: steel operations, metals recycling and ferrous resources operations, and steel fabrication operations. Approximately 11% of the company's workforce is represented by collective bargaining agreements, and two of these agreements effecting 72 employees at two locations expire during 2012.

Steel Operations

        Steel operations include the company's Flat Roll Division, Structural and Rail Division, Engineered Bar Products Division, Roanoke Bar Division, Steel of West Virginia and The Techs operations. These operations consist of mini-mills, producing steel from steel scrap, using electric arc furnaces, continuous casting, automated rolling mills, and downstream finishing facilities. Steel operations accounted for 61%, 61%, and 63% of the company's consolidated net sales during 2011, 2010, and 2009, respectively. The Flat Roll Division accounted for 27%, 28%, and 28% of the company's consolidated net sales during 2011, 2010, and 2009, respectively.

        The Flat Roll Division sells a broad range of hot rolled, cold rolled and coated steel products, including a large variety of specialty products such as light gauge hot rolled, galvanized, and painted products. The Structural and Rail Division sells structural steel beams, pilings and a variety of rail for the railroad industry. The Engineered Bar Products Division primarily sells special bar quality and merchant bar quality rounds and round-cornered squares. The Roanoke Bar Division sells billets and merchant steel products, including angles, plain rounds, flats and channels. Steel of West Virginia primarily sells merchant beams, channels and specialty structural steel sections. The Techs operates three galvanizing lines specializing in the galvanizing of specific types of flat rolled steels in non-automotive applications. The company's steel operations sell directly to end users and service centers. These products are used in numerous industry sectors, including the automotive, construction, commercial, transportation and industrial machinery markets.

Metals Recycling and Ferrous Resources Operations

        Metals recycling and ferrous resources operations include OmniSource Corporation (OmniSource), the company's metals recycling, steel scrap procurement, and processing locations, and our two ironmaking initiatives: Iron Dynamics (IDI), a liquid pig iron production facility; and our Minnesota iron operations, an iron nugget production facility and planned operations to supply the nugget facility with its primary raw material, iron concentrate. IDI primarily produces liquid pig iron, which is used as a scrap substitute raw material input exclusively at our Flat Roll Division. Our Minnesota iron operations consists of Mesabi Nugget, (owned 81% by us); our planned future iron mining operations which is currently in the permitting process, Mesabi Mining; and, our planned iron tailings operation, Mining Resources (owned 80% by us.) The construction of the Mesabi Nugget facility was completed in 2009, and initial production of iron nuggets commenced January 2010. Throughout 2010 and 2011, we have refined this pioneering production process and changed equipment configurations to increase production and plant availability. The facility's anticipated annual production capacity is 500,000 metric tons. In 2011 and 2010, Mesabi Nugget produced 156,000 and 75,000 metric tons of iron-nuggets, respectively, for use by our own steel mills. We are currently constructing the iron tailings operation, which is expected to start up in the third quarter of 2012. This operation, which involves the extraction

69

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 1. Description of the Business and Summary of Significant Accounting Policies (Continued)

of iron tailings from previously developed stockpiles or water-filled tailings basins, is planned to provide iron ore tailings to be concentrated for use by Mesabi Nugget as a low-cost iron concentrate to the nugget production process. Metals recycling ferrous resources operations accounted for 35%, 35%, and 31% of the company's consolidated net sales during 2011, 2010, and 2009, respectively.

        Three years subsequent to Mesabi Nugget achieving certain performance measures (which as of December 31, 2011, had not been met), the noncontrolling investor may elect to require the company to purchase at par value all (but not less than all) of the units it owns at the time of such election. At any time after that same date, the company may elect to purchase at par value all of the units owned by the noncontrolling investor. The $65.7 million and $54.3 million par value owned by the noncontrolling investor at December 31, 2011 and 2010, respectively, has been reported as redeemable noncontrolling interest in the consolidated balance sheets.

        On the fifth anniversary of the effective date of the formation of Mining Resources, the noncontrolling investor has a non-transferable, non-assignable right to require the company to purchase at fair value all (but not less than all) of the units it owns at that time. The $5.0 million value owned by the noncontrolling investor at December 31, 2011, has been reported as redeemable noncontrolling interest in the consolidated balance sheet.

Steel Fabrication Operations

        Steel fabrication operations include the company's six New Millennium Building System's joist and deck plants located throughout the United States and Northern Mexico. Revenues from these plants are generated from the fabrication of trusses, girders, steel joists and steel decking used within the non-residential construction industry. Steel fabrication operations accounted for 3%, 3%, and 4% of the company's consolidated net sales during 2011, 2010, and 2009, respectively.

Summary of Significant Accounting Policies

Principles of Consolidation

        The consolidated financial statements include the accounts of SDI, together with its wholly and majority owned or controlled subsidiaries, after elimination of significant intercompany accounts and transactions. Noncontrolling interests represent the noncontrolling owner's proportionate share in the equity, income, or losses of the company's majority-owned or controlled consolidated subsidiaries.

Use of Estimates

        These financial statements are prepared in conformity with accounting principles generally accepted in the United States, and accordingly, include amounts that require management to make estimates and assumptions that affect the amounts reported in the financial statements and in the notes thereto. Significant items subject to such estimates and assumptions include the carrying value of property, plant and equipment, intangible assets and goodwill; valuation allowances for trade receivables, inventories and deferred income tax assets; unrecognized tax benefits; potential environmental liabilities; and litigation claims and settlements. Actual results may differ from these estimates and assumptions.

70

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 1. Description of the Business and Summary of Significant Accounting Policies (Continued)

Revenue Recognition and Allowances for Doubtful Accounts

        Except for the steel fabrication operations segment, the company recognizes revenues from sales and the estimated allowance for returns from these sales at the time the title of the product transfers upon shipment. Provision is made for estimated product returns and customer claims based on estimates and actual historical experience. If the historical data used in the estimates does not reflect future returns and claims trends, additional provision may be necessary. The company's steel fabrication operations segment recognizes revenues from construction contracts using a percentage of completion methodology based on steel tons used on completed units to-date as a percentage of estimated total steel tons required by each contract. The allowance for doubtful accounts is based on the company's best estimate of probable credit losses, along with historical experience.

Cash and Equivalents

        Cash and equivalents include all highly liquid investments with a maturity of three months or less at the date of acquisition. Restricted cash is primarily funds held in escrow and deposits held at brokerage firms.

Inventories

        Inventories are stated at lower of cost or market. Cost is determined principally on a first-in, first-out, basis. Inventory consisted of the following at December 31 (in thousands):

	2011		2010
Raw materials	$	609,150	$	589,859
Supplies		251,716		231,816
Work in progress		106,609		94,346
Finished goods		232,109		198,042
	$	1,199,584	$	1,114,063

Investments

        The company has investments in certain joint ventures and closely-held companies in which ownership varies between 49% and 50%. For these investments where the company does not have effective control, the company accounts for the investment on the equity basis. Investments in companies in which the company does not exercise control and its ownership is less than 20% are carried at cost. These investments are reflected in other long-term assets on the company's balance sheet in an amount of $24.9 million and $27.1 million at December 31, 2011 and 2010, respectively.

Property, Plant and Equipment

        Property, plant and equipment are stated at cost, which includes capitalized interest on construction-in-progress amounts, or at fair market value for those purchased through acquisitions, and is reduced by proceeds received from certain state and local government grants and other capital cost reimbursements. The company assigns each fixed asset a useful life ranging from 3 to 15 years for plant, machinery and equipment and 10 to 40 years for buildings and improvements. Repairs and maintenance are expensed as

71

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 1. Description of the Business and Summary of Significant Accounting Policies (Continued)

incurred. Depreciation is provided utilizing the straight-line depreciation methodology or the units-of-production depreciation methodology, based on units produced, subject to a minimum and maximum level. Depreciation expense was $176.5 million, $171.7 million, and $158.9 million for the years ended December 31, 2011, 2010, and 2009, respectively.

        The company's property, plant and equipment at December 31 consisted of the following (in thousands):

	2011		2010
Land and improvements	$	271,208	$	257,756
Buildings and improvements		496,976		480,434
Plant, machinery and equipment		2,656,358		2,571,850
Construction in progress		127,019		96,586
		3,551,561		3,406,626
Less accumulated depreciation		1,357,816		1,193,293
Property, plant and equipment, net	$	2,193,745	$	2,213,333

Intangible Assets

        The company's intangible assets, at December 31, consisted of the following (in thousands):

	2011		2010		Useful Life	Weighted Average Amortization Period
Customer and scrap generator relationships	$	408,400	$	408,400	10 to 25 years		20 years
Trademarks		189,800		189,800	Indefinite		—
Trademarks		19,700		19,700	4 to 12 years		12 years
Other		14,220		14,220	3 months to 6 years		5 years
		632,120		632,120			19 years
Less accumulated amortization		181,227		142,880
	$	450,893	$	489,240

        The company utilizes an accelerated amortization methodology for customer and scrap generator relationships in order to follow the pattern in which the economic benefits of the amounts are anticipated to be consumed. Finite-lived trademarks are amortized using a straight line methodology. Amortization of intangible assets was $38.3 million, $44.3 million, and $52.4 million for the years ended

72

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 1. Description of the Business and Summary of Significant Accounting Policies (Continued)

December 31, 2011, 2010, and 2009, respectively. Estimated amortization expense, related to amortizable intangibles, for the years ending December 31 is as follows (in thousands):

2012	$	34,258
2013		30,476
2014		26,090
2015		23,390
2016		20,902
Thereafter		125,977
Total	$	261,093

Impairment of Long-Lived Tangible and Finite-Lived Intangible Assets

        The company reviews long-lived assets for impairment whenever events or changes in circumstances indicate the carrying amount of such assets may not be recoverable. Impairment losses are recorded on long-lived assets used in operations when indicators of impairment are present and the undiscounted cash flows estimated to be generated by those assets are less than the assets' carrying amounts. The impairment loss is measured by comparing the fair value of the asset to its carrying amount. We consider various factors and determine whether an impairment test is necessary, including by way of examples, a significant and prolonged deterioration in operating results and projected cash flows, significant changes in the extent or manner in which an asset is used, technological advances with respect to assets which would potentially render them obsolete, our strategy and capital planning, and the economic climate in markets to be served.

        After the purchase of additional fabrication assets in the fourth quarter of 2010 and determining the future use of existing fabrication facilities, the company determined that the carrying value of certain fixed assets at its idled South Carolina fabrication facility exceeded their fair value as determined utilizing market and cost approaches. The resulting impairment charge of $12.8 million was recorded within the steel fabrication reporting segment in 2010.

Goodwill

        The company's goodwill is allocated to the following reporting units at December 31, (in thousands):

	2011		2010
OmniSource—Metals Recycling/Ferrous Resources Segment	$	571,317	$	577,926
The Techs—Steel Segment		142,783		142,783
Roanoke Bar Division—Steel Segment		29,041		29,041
New Millennium Building Systems—Steel Fabrication Segment		1,925		1,925
	$	745,066	$	751,675

        OmniSource goodwill decreased $6.6 million from December 31, 2010 to December 31, 2011 in recognition of the 2011 tax benefit related to the amortization of the component of OmniSource tax-deductible goodwill in excess of book goodwill.

73

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 1. Description of the Business and Summary of Significant Accounting Policies (Continued)

Impairment of Goodwill and Indefinite-Lived Intangible Assets

        At least once annually or when indicators of impairment exist, the company performs an impairment test for goodwill and other indefinite-lived intangible assets. Goodwill is allocated to various reporting units, which are generally one level below the company's operating segments. The company utilizes a two-stepped approach to measuring goodwill impairment. The first step of the test determines if there is potential goodwill impairment. In this step the company compares the fair value of the reporting unit to its carrying amount (which includes goodwill). The fair value of the reporting unit is determined by using an estimate of future cash flows utilizing a risk-adjusted discount rate to calculate the net present value of future cash flows, and assessing its reasonableness by using a market approach based upon an analysis of valuation metrics of comparable peer companies. If the carrying amount exceeds the fair value, the company performs the second step of the test, which measures the amount of impairment loss to be recorded, if any. In the second step, the company compares the carrying amount of the goodwill to the implied fair value of the goodwill based on the net fair value of the recognized and unrecognized assets and liabilities of the reporting unit. If the implied fair value is less than the carrying value, an impairment loss is recorded to the extent that the fair value of the goodwill is less than its carrying value.

        The company tests indefinite-lived intangible assets for impairment through the comparison of the fair value of the specific intangible asset with its carrying amount. The fair value of the intangible asset is determined by using an estimate of future cash flows attributable to the asset and a risk-adjusted discount rate to compute a net present value of future cash flows. If the fair value is less than the carrying value, an impairment loss is recorded in an amount equal to the excess in carrying value.

Equity-Based Compensation

        The company has several stock-based employee compensation plans which are more fully described in Note 5. Compensation expense for stock options is recorded over the vesting period using the fair value on the grant date, as calculated using the Black-Scholes model. Compensation expense for stock-based employee compensation plans, including stock options, was $14.8 million, $12.5 million, and $13.2 million for the years ended December 31, 2011, 2010, and 2009, respectively.

Income Taxes

        The company accounts for income taxes and the related accounts under the liability method. Deferred tax liabilities and assets are determined based on the difference between the financial statement and tax bases of assets and liabilities using enacted rates expected to be in effect during the year in which the basis differences reverse.

Earnings (Loss) Per Share

        Basic earnings (loss) per share is based on the weighted average shares of common stock outstanding during the period. Diluted earnings per share assumes the weighted average dilutive effect of common share equivalents outstanding during the period applied to the company's basic earnings per share. Common share equivalents represent potentially dilutive stock options and dilutive shares related to the company's convertible subordinated debt and are excluded from the computation in periods in which they have an anti-dilutive effect. Options to purchase 4.0 million shares, 3.1 million shares, and 2.1 million

74

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 1. Description of the Business and Summary of Significant Accounting Policies (Continued)

shares were anti-dilutive at December 31, 2011, 2010 and 2009, respectively. Due to the company's net loss for the year ended December 31, 2009, the computation of diluted net loss per share did not include the after-tax equivalent of interest of $5.0 million for the company's 5.125% senior convertible notes, due 2014 and the related weighted average equivalent of 8.4 million shares.

        The following table presents a reconciliation of the numerators and the denominators of the company's basic and diluted earnings (losses) per share computations for the years ended December 31 (in thousands, except per share data):

	2011						2010
	Net Income (Numerator)		Shares (Denominator)		Per Share Amount		Net Income (Numerator)		Shares (Denominator)		Per Share Amount
Basic earnings per share	$	278,120		218,471	$	1.27	$	140,709		216,760	$	.65
Dilutive stock options		—		1,139				—		1,575
5.125% convertible senior notes		9,432		16,382				9,508		16,382
Diluted earnings per share	$	287,552		235,992	$	1.22	$	150,217		234,717	$	.64

	2009
	Net Loss (Numerator)			Shares (Denominator)		Per Share Amount
Basic loss per share	$	(8,184	)		200,704	$	(.04	)
Dilutive stock options		—			—
4.0% convertible subordinated notes		—			—
Diluted loss per share	$	(8,184	)		200,704	$	(.04	)

Concentration of Credit Risk

        Financial instruments that potentially subject the company to significant concentrations of credit risk principally consist of temporary cash investments, short-term commercial paper, and accounts receivable. The company places its temporary cash and short-term commercial paper investments with high credit quality financial institutions and companies, and limits the amount of credit exposure from any one entity. The company is exposed to credit risk in the event of nonpayment by customers. The company mitigates its exposure to credit risk, which it generally extends initially on an unsecured basis, by performing ongoing credit evaluations and taking further action if necessary, such as requiring letters of credit or other security interests to support the customer receivable. Management's estimation of the allowance for doubtful accounts is based upon known credit risks, historical loss experience and current economic conditions affecting the company's customers. Customer accounts receivable are charged off when all collection efforts have been exhausted and the amounts are deemed uncollectible. Heidtman Steel Products (Heidtman), a related party, accounted for 5% of the company's net accounts receivable at December 31, 2011 and 2010.

75

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 1. Description of the Business and Summary of Significant Accounting Policies (Continued)

Derivative Financial Instruments

        The company recognizes all derivatives as either assets or liabilities in the consolidated balance sheets and measures those instruments at fair value. Derivatives that are not designated as hedges must be adjusted to fair value through income. Changes in the fair value of derivatives that are designated as hedges, depending on the nature of the hedge, are recognized as either an offset against the change in fair value of the hedged balance sheet item in the case of fair value hedges or as other comprehensive income in the case of cash flow hedges, until the hedged item is recognized in earnings. The ineffective portion of a derivative's change in fair value is immediately recognized in earnings as other income or expense.

        In the normal course of business, the company may have involvement with derivative financial instruments related to managing fluctuations in interest rates, foreign exchange rates, and forward contracts in various commodities. The company periodically employs interest rate swap and forward-rate agreements, and foreign currency exchange contracts as necessary. At the time of acquiring financial instruments, the company designates and assigns these instruments as hedges of specific assets, liabilities or anticipated transactions. When hedged assets or liabilities are sold or extinguished, or the anticipated transaction being hedged is no longer expected to occur, the company recognizes the gain or loss on the designated hedged financial instrument. The company routinely enters into forward contracts in various commodities, primarily nonferrous metals in our Metals Recycling and Ferrous Resources operations, to reduce exposure to commodity related price fluctuations. These forward contracts do not meet hedging criteria and accordingly, the company recognizes the change in fair value related to these forward contracts in costs of goods sold. The company does not enter into derivative financial instruments for speculative purposes.

Note 2. Long-Term Debt

        The company's borrowings consisted of the following at December 31 (in thousands):

	2011		2010
73/8% senior notes, due 2012	$	700,000	$	700,000
5.125% convertible senior notes, due 2014		287,500		287,500
63/4% senior notes, due 2015		500,000		500,000
73/4% senior notes, due 2016		500,000		500,000
75/8% senior notes, due 2020		350,000		350,000
Other secured obligations		42,600		49,321
Total debt		2,380,100		2,386,821
Less current maturities		444,078		8,924
Long-term debt	$	1,936,022	$	2,377,897

Senior Secured Credit Facility, due 2016

        On September 29, 2011, the company amended, restated and expanded its existing senior secured credit facility (Facility) from the prior $924.0 million level to a renewed $1.1 billion revolver due September 2016 (Revolver). Subject to certain conditions, the company has the opportunity to increase the Revolver size by an additional $125.0 million. The Revolver is available to fund working capital,

76

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 2. Long-Term Debt (Continued)

capital expenditures, and other general corporate purposes. The Facility is guaranteed by certain of the company's subsidiaries; and is secured by substantially all of the company's and its wholly-owned subsidiaries' receivables and inventories, and by pledges of all shares of the company's wholly-owned subsidiaries' capital stock. On January 11, 2012, the company expanded the Facility by adding a $275.0 million term loan that matures on September 30, 2016 (Term Loan). Quarterly principal payments under the Term Loan are required to be made in amounts ranging from 1.25% to 3.75% of the original principal amount, with the unpaid principal balance of approximately $158 million due on the maturity date. Interest, based on the Facility's pricing grid (2.0% at January 11, 2012) is payable quarterly. The Company used the net proceeds of the Term Loan, together with cash on hand, to fund the January 2012 purchase of $279.7 million of the company's 7³/8% Senior Notes due 2012.

        The Facility pricing grid is adjusted quarterly and is based on company's leverage of total debt to last-twelve-month's (LTM) adjusted EBITDA (earnings before interest, taxes, depreciation, amortization, and certain other non-cash transactions, as defined in the credit agreement). The minimum pricing is LIBOR plus 1.00% or Prime, and the maximum pricing is LIBOR plus 2.00% or Prime plus 1.00%. In addition the company is subject to an unused commitment fee of between 0.25% and 0.45% (based on leverage of total debt to LTM adjusted EBITDA) which is applied to the unused portion of the $1.1 billion revolver each quarter.

        The Facility contains financial covenants and other covenants that limit or restrict our ability to make capital expenditures; incur indebtedness; permit liens on property; enter into transactions with affiliates; make restricted payments or investments; enter into mergers, acquisitions or consolidations; conduct asset sales; pay dividends or distributions and enter into other specified transactions and activities. Our ability to borrow funds within the terms of the Revolver is dependent upon our continued compliance with the financial and other covenants. The Facility also contains a borrowing base requirement regarding the maximum availability of the Revolver. The company's Revolver must be the lesser of:

I.

$1.1 billion less other applicable commitments, such as letters of credit and other secured debt, as defined within the credit agreement, or;



II.

The sum of 85% of the company's eligible accounts receivable and 65% of the company's eligible inventories, less other applicable commitments, such as letters of credit and other secured debt, as defined within the credit agreement.

        At December 31, 2011, the company had $1.1 billion of availability on the Revolver, $16.5 million of outstanding letters of credit and other obligations which reduce availability, and there were no borrowings outstanding.

        The Facility's financial covenants are as follows:

I.

Minimum Liquidity—Liquidity is defined as unrestricted cash and Revolver availability, each as defined in the credit agreement. The company must maintain minimum liquidity of $150.0 million plus any outstanding amount of the $700.0 million senior notes due 2012, which requirement was $850 million at December 31, 2011. At December 31, 2011, the company's liquidity was almost $1.6 billion.



II.

Interest Coverage—Interest coverage is defined as the ratio of the company's consolidated LTM adjusted EBITDA to the company's consolidated LTM gross interest expense. The

77

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 2. Long-Term Debt (Continued)

company must maintain an interest coverage ratio of not less than 2.50 to 1.00. At December 31, 2011, the company's interest coverage ratio was 4.92 to 1.00.

III.

Net Debt Leverage—Net debt leverage is defined as the ratio of the company's consolidated net debt, as defined within the credit agreement, to consolidated LTM adjusted EBITDA. The company must maintain a net debt leverage ratio of less than 5.00 to 1.00. In addition, if the total debt to consolidated LTM adjusted EBITDA ratio exceeds 3.50 to 1.00 at any time, then the ability of the company to make restricted payments as defined in the credit agreement (which includes cash dividends to stockholders and share purchases, among other things), could be limited. At December 31, 2011, the company's net debt leverage ratio was 2.36 to 1.00.

        The company was in compliance with its financial covenants at December 31, 2011 and anticipates remaining in compliance during the next twelve months.

7³/8% Senior Notes, due 2012

        The $700.0 million of 7³/8% senior notes mature in November 2012, and pay interest semi-annually on May 1 and November 1 of each year and are equal in right of payment with all existing and future senior unsecured indebtedness and senior in right of payment to all subordinated indebtedness. In January 2012, the company repaid $279.7 million aggregate principal amount of its 7³/8% senior notes due 2012, pursuant to the company's previously announced cash tender offer for up to $350.0 million of the $700.0 million aggregate principal amount of the senior notes. The company used the proceeds from the January 2012 $275.0 million Term Loan discussed above, along with available cash to fund the tender offer. As a result of the tender, the company recorded expenses in January 2012 of approximately $13.9 million related to the tender premium, unamortized financing fee write-offs, and tender expenses.

5.125% Convertible Senior Notes, due 2014

        In June 2009, the company issued $287.5 million of 5.125% convertible senior notes due June 2014. The net proceeds from these notes, along with the issuance of common stock was approximately $678.8 million and was used to prepay the term A loan on the senior secured credit facility as well as to repay a portion of the company's revolving credit facility then outstanding.

        The 5.125% convertible senior notes due 2014 are non-cancelable for five years and bear interest at 5.125% payable semi-annually in arrears on June 15 and December 15 of each year. Note holders can convert the notes into the company's common stock at an initial conversion rate of 56.9801 per $1,000 principal amount of notes (16,381,779 shares.) The conversion rate is fixed, except for standard anti-dilution provisions related to such events as the issuance of common stock as a dividend or distribution, the effect of a share split or share combination, issuance to all or substantially all holders of our common stock certain rights or warrants to subscribe for or purchase shares of our common stock, pay cash dividends or distributions to all or substantially all holders of our common stock other than regular quarterly cash dividends exceeding an established threshold amount per share, or if we make a payment in respect of a tender offer or exchange offer for our common stock. In addition, on or after June 20, 2012, if the last reported sales price of the company's common stock for 20 or more trading days in a period of 30 consecutive trading days ending on the trading day prior to the date the company provides the notice of redemption to holders exceeds 130% of the applicable conversion price (currently $17.55 per share) in effect on each such trading day, the company may redeem for cash all

78

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 2. Long-Term Debt (Continued)

or part of the notes at a price equal to 100% of the principal amount of the notes to be redeemed, plus accrued and unpaid interest. The 5.125% convertible senior notes are equal in right of payment with all existing and future senior unsecured indebtedness and senior in right of payment to all subordinated indebtedness.

6³/4% Senior Notes, due 2015

        The $500.0 million of 6³/4% senior notes mature in 2015, and pay interest semiannually on April 1 and October 1 of each year. The 6³/4% senior notes contain provisions that allow the company to redeem the notes any time on or after April 1, 2011 at a redemption price of 103.375%, on or after April 1, 2012 at a redemption price of 101.688%, and on or after April 1, 2013 at 100.000%. The 6³/4% Notes are in equal right of payment with all existing and future senior unsecured indebtedness and senior in right of payment to all subordinated indebtedness.

7³/4% Senior Notes, due 2016

        The $500.0 million of 7³/4% senior notes mature in 2016, and pay interest semi-annually on April 15 and October 15 of each year. The company may redeem the 7³/4% senior notes at any time after April 15, 2012 at a redemption price of 103.875%, on or after April 15, 2013 at a redemption price of 101.938%, and on or after April 15, 2014 at a redemption price of 100.000%. The 7³/4% senior notes are equal in right of payment with all existing and future senior unsecured indebtedness and senior in right of payment to all subordinated indebtedness.

7⁵/8% Senior Notes, due 2020

        In March 2010, the company issued $350.0 million of 7⁵/8% senior notes due 2020. The net proceeds from the 7⁵/8% senior notes were used to repay the then outstanding amounts under the company's senior secured revolving credit facility and for general corporate purposes.

        The 7⁵/8% senior notes mature in 2020, and pay interest semi-annually on March 15 and September 15 of each year. Prior to March 15, 2013, the company may redeem up to 35% of the principal amount of the 7⁵/8% senior notes with the net cash proceeds of one or more sales of its common stock at a redemption price of 107.625%. In addition, the company may redeem the 7⁵/8% senior notes at any time after March 15, 2015 at a redemption price of 103.813%, on or after March 15, 2016 at a redemption price of 102.542%, on or after March 15, 2017 at a redemption price of 101.271%, and on or after March 15, 2018 at a redemption price of 100.000%. The 7⁵/8% senior notes are equal in right of payment with all existing and future senior unsecured indebtedness and senior in right of payment to all subordinated indebtedness.

Other Secured Obligations

        State and Local Government Municipal Bond Issues.    In November 1998, the company received $10.0 million from Whitley County, Indiana, representing proceeds from solid waste and sewage disposal revenue bonds to be used to finance certain solid waste and sewage disposal facilities. Interest at 7.3% was payable semi-annually and principal payments were due through final maturity in 2018. The company repaid the outstanding principal balance of $7.1 million during 2011.

79

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 2. Long-Term Debt (Continued)

        Electric Utility Development Loans.    In April 2002, the company received $9.8 million from the Northeastern Rural Electric Membership Corporation (REMC) and Wabash Valley Power Association, Inc. to finance the company's portion of the cost to construct a transmission line and certain related facilities at the Structural and Rail Division. The loan bears interest at 8.1%, with monthly principal and interest payments required through maturity in 2022. The company established an unused $4.0 million stand-by letter of credit for the REMC agreement. The outstanding principal balance on the transmission facility loan was $6.9 million and $7.3 million as of December 31, 2011 and 2010, respectively.

        Mesabi Nugget Loan Participation.    Pursuant to the construction and financing of the Mesabi Nugget iron-nugget project, the company entered into financing arrangements with Mesabi Nugget. The amended agreements provided Mesabi Nugget with an $85.0 million revolving credit facility and $240 million in a term facility. Under these agreements, the company is the lender (with first lien security rights on substantially all of Mesabi Nugget's assets) and Mesabi Nugget is the borrower. Under one of the term agreements the company sold and assigned to Kobe a participation interest, for which Kobe provided $25.0 million in 2009 and an additional $10 million in 2010, which was also included in the company's consolidated other long term debt at December 31, 2010. Effective December 31, 2010, the company converted $130.0 million (81% of the total conversion amount) of term notes into equity of Mesabi Nugget, and Kobe converted $30.5 million (19% of the total conversion amount) of its $35.0 million loan participation into equity of Mesabi Nugget. The remaining portion of the outstanding loan balances between the company and Mesabi Nugget are eliminated through consolidation. The remaining $4.5 million (less current portion of $901,000) of Kobe loan participation is included in the company's consolidated other long term debt at December 31, 2011. The weighted average interest rate on this debt at December 31, 2011 was 2.8%.

        Minnesota Economic Development State Loans.    During 2009 and 2010, Mesabi Nugget received $26.5 million from various Minnesota state agencies for the construction and ultimate operation of the company's Mesabi Nugget project. Monthly principal and interest payments begin in August 2012. The 3.5% interest rate at December 31, 2011 is expected to remain through February 2017, and then change to 5.0% through maturity in 2027. Amounts due under these loans were $26.5 million at December 31, 2011 and 2010.

Outstanding Debt Maturities

        Maturities of outstanding debt as of December 31, 2011; considering the January 2012 issuance of a $275.0 million Term Loan and payment of $279.7 million of the $700.0 million of 7³/8% senior notes due in November 2012, are as follows (in thousands):

2012	$	444,078
2013		16,770
2014		318,111
2015		544,421
2016		682,461
Thereafter		374,259
	$	2,380,100

80

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 2. Long-Term Debt (Continued)

        The company capitalizes interest on all appropriate construction-in-progress assets. For the years ended December 31, 2011, 2010 and 2009, total interest costs incurred were $178.7 million, $177.2 million, and $162.3 million, respectively, of which $1.7 million, $7.0 million and $20.9 million, respectively, were capitalized. Cash paid for interest was $171.8 million, $162.4 million, and $156.2 million for the years ended December 31, 2011, 2010, and 2009, respectively.

Note 3. Income Taxes

        The company files a consolidated federal income tax return. Net cash paid for taxes was $75.9 million for the year ended December 31, 2011, and net cash received for taxes was $66.3 million and $59.4 million for the years ended December 31, 2010 and 2009, respectively. The current and deferred federal and state income tax expense (benefit) for the years ended December 31 is as follows (in thousands):

	2011		2010		2009
Current income tax expense (benefit)	$	128,209	$	39,554	$	(96,140	)
Deferred income tax expense		30,418		44,306		88,922
Total income tax expense (benefit)	$	158,627	$	83,860	$	(7,218	)

        A reconciliation of the statutory tax rates to the actual effective tax rates for the years ended December 31, are as follows:

	2011			2010			2009
Statutory federal tax rate		35.0	%		35.0	%		35.0	%
State income taxes, net of federal benefit		3.5			3.2			1.9
Other permanent differences		(1.1	)		1.1			2.7
Effective tax rate		37.4	%		39.3	%		39.6	%

        Significant components of the company's deferred tax assets and liabilities at December 31 are as follows (in thousands):

	2011			2010
Deferred tax assets
Capitalized start-up costs	$	29,182		$	29,728
Assets capitalized for tax, expensed for books		32,711			28,017
Accrued expenses		31,824			26,122
Total deferred tax assets		93,717			83,867
Deferred tax liabilities
Property, plant and equipment		(471,847	)		(448,557	)
Intangible assets		(79,778	)		(69,455	)
Other		(6,666	)		(2,603	)
Total deferred tax liabilities		(558,291	)		(520,615	)
Net deferred tax liability	$	(464,574	)	$	(436,748	)

81

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 3. Income Taxes (Continued)

        A reconciliation of the beginning and ending amount of unrecognized tax benefits is as follows (in thousands):

	2011			2010			2009
Balance at January 1	$	49,396		$	49,587		$	47,875
Increases related to current year tax positions		2,046			300			780
Increases related to prior year tax positions		13,785			1,361			5,099
Decreases related to prior year tax positions		(196	)		(496	)		(3,766	)
Lapses in statutes of limitations		—			(1,128	)		(401	)
Settlements with taxing authorities		(476	)		(228	)		—
Balance at December 31	$	64,555		$	49,396		$	49,587

        Included in the balance of unrecognized tax benefits at December 31, 2011 are potential benefits of $24.6 million that, if recognized, would affect the effective tax rate. The company recognizes interest and penalties related to its tax contingencies on a net-of-tax basis in income tax expense. During the year ended December 31, 2011, the company recognized interest expense of $3.1 million, net of tax, and penalties of $35,000. In addition to the unrecognized tax benefits in the table above, the company had $16.1 million accrued for the payment of interest and penalties at December 31, 2011.

        The company files income tax returns in the U.S. federal jurisdiction as well as income tax returns in various state jurisdictions. The Internal Revenue Service (IRS) is currently examining the company's federal income tax returns for the years 2004 through 2009. At this time the company does not believe there will be any significant examination adjustments that would result in a material change to the company's financial position or results of operations. It is reasonably possible that the amount of unrecognized tax benefits could change in the next twelve months as a result of these state and federal income tax audits. Based on the current audits in process, the payment of taxes as a result of audit settlements could be in an amount from zero to $2.3 million by the end of 2012. With few exceptions, including those discussed above, the company is no longer subject to federal, state and local income tax examinations by tax authorities for years ended before 2008.

Note 4. Shareholders' Equity

Common Stock Issuance

        In June 2009 the company completed a public offering of 31,050,000 shares of its common stock at a public offering price of $13.50 per share. Net proceeds of the offering along with the concurrent issuance of the company's 5.125% convertible senior notes due 2014 was approximately $678.8 million, after deducting underwriting discounts, commissions and other offering expenses. The net proceeds from this offering were used to repay the company's then outstanding Term A loan of $552.0 million and for general corporate purposes, including the repayment of then outstanding borrowings on the company's senior secured revolver.

Cash Dividends

        The company declared cash dividends of $87.5 million, or $.400 per common share, during 2011; $65.1 million, or $.300 per common share, during 2010; and $66.7 million, or $.325 per common share,

82

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 4. Shareholders' Equity (Continued)

during 2009. The company paid cash dividends of $81.9 million, $65.0 million and $68.7 million during 2011, 2010 and 2009, respectively.

Treasury Stock

        The company's board of directors has authorized the company to repurchase shares of the company's common stock through open market trades. The company did not repurchase any shares during 2011, 2010 or 2009. As of December 31, 2011, the company had remaining authorization to repurchase approximately 3.6 million additional shares. The repurchase program does not have an expiration date.

Note 5. Equity-based Incentive Plans

2006 Equity Incentive Plan (2006 Plan)

        The company's stockholders approved the 2006 Plan at the company's annual meeting of stockholders held May 18, 2006. The company reserved 16.0 million shares of common stock for issuance upon exercise of options or other equity grants under the 2006 Plan. At December 31, 2011, there were 1.0 million shares still available for issuance. The 2006 Plan was designed to attract, motivate and retain qualified persons that are able to make important contributions to the company's success. To accomplish these objectives, the 2006 Plan provides for awards of equity-based incentives through option grants, restricted stock awards, unrestricted stock awards, stock appreciation rights, performance awards, and deferred stock units. Pursuant to the 2006 Plan, the company awarded 42,000 deferred stock units in 2011; issued 249,000 shares, 43,300 shares, and 157,000 shares of restricted stock during 2011, 2010, and 2009, respectively, and granted 2.7 million, 2.5 million and 1.6 million options during 2011, 2010, and 2009, respectively. No other equity-based incentives were issued pursuant to the 2006 Plan during the three year period ended December 31, 2011.

        The company satisfies stock options with newly issued shares, and satisfies restricted stock awards, and deferred stock units with treasury shares. Substantially all of the company's employees are eligible for the stock option element of the 2006 Plan, pursuant to which the options vest 100% six months after the date of grant, with a maximum term of five years. Options are granted each May and November at an exercise price of 100% of the fair market value of the company's common stock on the date of grant.

        The estimated weighted-average fair value of the individual options granted on the date of grant was $5.36, $5.81, and $5.14 during 2011, 2010, and 2009, respectively. The aggregate intrinsic value of options exercised was $7.4 million, $11.6 million, and $26.2 million for the years ended December 31, 2011, 2010, and 2009, respectively. The aggregate intrinsic value of options which were exercisable as of December 31, 2011 was $12.1 million. The aggregate intrinsic value of options that are currently outstanding and that are expected to be exercised is $ 13.1 million. Total unrecognized stock option compensation expense, which will be recognized through May 2012, is $5.7 million at December 31, 2011. The disclosures related to the effect of equity-based compensation expense for the year ended

83

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 5. Equity-based Incentive Plans (Continued)

December 31, 2011, 2010, and 2009, are based on the fair value of stock option awards estimated on the date of grant using the Black-Scholes option valuation model with the following assumptions:

	2011			2010			2009
Volatility(1)		65.1 - 66.3	%		66.4 - 67.0	%		67.2 - 67.4	%
Risk-free interest rate(2)		0.4 - 1.4	%		0.8 - 2.0	%		2.1 - 2.2	%
Dividend yield(3)		2.3 - 2.5	%		2.0 - 2.2	%		1.7 - 2.0	%
Expected life (years)(4)		2.8 - 4.1			2.8 - 4.1			2.2 - 3.9

(1)

The volatility is based on the historical volatility of the company's stock.

(2)

The risk-free interest rate is based on the U.S. Treasury strip rate for the expected life of the option.

(3)

The expected dividend yield is based on the company's latest annualized dividend rate and recent historical market prices of the underlying common stock at the date of grant.

(4)

The expected life in years is determined primarily from historical stock option exercise data.

        Dividends are not paid to holders of unexercised options. The company's stock option activity is as follows:

	Options			Weighted Average Exercise Price		Weighted Average Fair Value
Outstanding options as of January 1, 2009		7,986,681		$	10.86	$	3.40
Granted		1,637,107			15.04		5.14
Exercised		(2,807,898	)		5.81		2.57
Forfeited		(326,519	)		15.83		5.92
As of December 31, 2009		6,489,371			13.69		5.09
Granted		2,545,932			14.73		5.81
Exercised		(1,414,153	)		8.11		2.89
Forfeited		(214,757	)		20.35		6.33
As of December 31, 2010		7,406,393			14.91		5.14
Granted		2,742,904			14.34		5.36
Exercised		(1,047,297	)		11.37		4.28
Forfeited		(499,718	)		16.61		6.15
As of December 31, 2011		8,602,282			15.06		5.25

84

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 5. Equity-based Incentive Plans (Continued)

        The following table summarizes certain information concerning the company's outstanding options as of December 31, 2011.

Range of Exercise Price	Outstanding Options		Weighted Average Remaining Contractual Life (Years)		Weighted Average Exercise Price Outstanding Options		Exercisable Options		Weighted Average Exercise Price Exercisable Options
$0 to $10		1,530,294		1.9	$	5.23		1,530,294	$	5.23
$10 to $15		3,094,843		4.0		13.13		1,498,555		13.76
$15 to $20		2,781,396		3.9		16.39		2,781,396		16.39
$20 to $30		741,037		0.7		24.50		741,037		24.50
$30 to $40		454,712		1.4		37.84		454,712		37.84

2008 Executive Incentive Compensation Plan (Executive Plan)

        Pursuant to the company's Executive Plan, certain officers and other senior management members of the company are eligible to receive cash bonuses based on predetermined formulas. In the event the cash portion of the bonus exceeds the predetermined maximum cash payout, the excess bonus is distributed as common stock of the company, which vests over a three-year period. A total of 2.5 million shares have been reserved under this plan, which was amended, and approved by stockholders, during 2008. At December 31, 2011, 1.9 million shares under the Executive Plan remained available for issuance. Pursuant to the Executive Plan, shares were awarded with a market value of approximately $4.0 million for the award year 2011 and $208,000 for the award year 2010. No shares were awarded for the award year 2009.

2004 Employee Stock Purchase Plan

        The 2004 Employee Stock Purchase Plan allows eligible employees, at their election, to purchase shares of the company's stock on the open market at fair market value with a designated broker through payroll deductions. The maximum allowable payroll deduction for the plan, excluding company matching contributions, is $10,400 in any calendar year. The company provides matching contributions of 10% of employees' payroll deductions. The company's total expense for the plan was $328,000, $299,000, and $304,000 for the years ended December 31, 2011, 2010, and 2009, respectively.

Note 6. Derivative Financial Instruments

        The company is exposed to certain risks relating to its ongoing business operations. At times the company utilizes derivative instruments to mitigate commodity margin risk, interest rate risk, and foreign currency exchange rate risk. Forward contracts on various commodities are entered into to manage the price risk associated with forecasted purchases and sales of nonferrous materials (specifically aluminum, copper, nickel and silver) from the company's metals recycling operations. Interest rate swaps may be entered into to manage interest rate risk associated with the company's fixed and floating-rate borrowings. Forward exchange contracts on various foreign currencies may be entered into to manage the foreign currency exchange rate risk as necessary.

        The company designated an interest rate swap, which was terminated in June 2009, as a cash flow hedge of floating-rate borrowings. Forward contracts on various commodities and forward exchange contracts on various foreign currencies are not designated as hedging instruments.

85

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 6. Derivative Financial Instruments (Continued)

        Cash Flow Hedging Strategy.    For derivative instruments that are designated and qualify as a cash flow hedge (i.e., hedging the exposure to variability in expected future cash flows that is attributable to a particular risk), the effective portion of the gain or loss on the derivative instrument is reported as a component of other comprehensive income and reclassified into earnings in the same line item associated with the forecasted transaction and in the same period or periods during which the hedged transaction affects earnings (e.g., in "interest expense" when the hedged transactions are interest cash flows associated with floating-rate borrowings). The remaining gain or loss on the derivative instrument in excess of the cumulative change in the present value of future cash flows of the hedged item, if any (i.e., the ineffectiveness portion), or hedge components excluded from the assessment of effectiveness, are recognized in the statement of operations during the current period.

        Commodity futures contracts.    If the company is "long" on futures contracts, it means the company has more futures contracts purchased than futures contracts sold for the underlying commodity. If the company is "short" on a futures contract, it means the company has more futures contracts sold than futures contracts purchased for the underlying commodity. The following summarizes the company's commodity futures contract commitments as of December 31, 2011 (MT represents metric tons and Lbs represents pounds):

Commodity	Long/Short	Total
Aluminum	Long		10,200	MT
Aluminum	Short		8,550	MT
Copper	Long		2,427	MT
Copper	Short		7,394	MT
Nickel	Long		36	MT
Nickel	Short		198	MT
Silver	Short		343	Lbs

        The following summarizes the location and amounts of the fair values reported on the company's balance sheets and gains or losses related to derivatives included in the company's statements of operations as of and for the years ended December 31 (in thousands):

		Fair Value
Balance Sheets, as of December 31		2011		2010
Commodity futures net liability	Accrued expenses	$	1,219	$	4,988

		Gain (Loss)
Statements of Operations, Years Ended December 31		2011		2010			2009
Commodity futures contracts	Costs of goods sold	$	12,531	$	(5,907	)	$	7,347
Interest rate swap	Other comprehensive income		—		—			2,294
Interest rate swap	Other expense		—		—			(1,350	)

Note 7. Fair Value Measurements

        FASB accounting standards provide a comprehensive framework for measuring fair value and sets forth a definition of fair value and establishes a hierarchy prioritizing the inputs to valuation techniques, giving the highest priority to quoted prices in active markets for identical assets and

86

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 7. Fair Value Measurements (Continued)

liabilities and the lowest priority to unobservable value inputs. Levels within the hierarchy are defined as follows:

•

Level 1—Unadjusted quoted prices for identical assets and liabilities in active markets;

•

Level 2—Quoted prices for similar assets and liabilities in active markets (other than those included in Level 1) which are observable for the asset or liability, either directly or indirectly; and

•

Level 3—Valuations derived from valuation techniques in which one or more significant inputs or significant value drivers are unobservable.

        The following table sets forth financial assets and liabilities measured at fair value in the consolidated balance sheet and the respective levels to which the fair value measurements are classified within the fair value hierarchy as of December 31 (in thousands):

	Total		Quoted Prices in Active Markets for Identical Assets (Level 1)		Significant Other Observable Inputs (Level 2)		Significant Unobservable Inputs (Level 3)
2011
Investment in short-term commercial paper	$	84,830	$	—	$	84,830	$	—
Commodity futures—financial assets		3,159		—		3,159		—
Commodity futures—financial liabilities		4,378		—		4,378		—
2010
Commodity futures—financial assets		7,052		—		7,052		—
Commodity futures—financial liabilities		12,040		—		12,040		—

        The carrying amounts of financial instruments including cash and equivalents, accounts receivable and accounts payable approximate fair value, because of the relatively short maturity of these instruments. The fair values of short-term commercial paper and commodity futures contracts are estimated by the use of quoted market prices, estimates obtained from brokers, and other appropriate valuation techniques based on references available. The fair value of long-term debt, including current maturities, as determined by quoted market prices, was approximately $2.5 billion (with a corresponding carrying amount in the consolidated balance sheet of $2.4 billion) at both December 31, 2011 and 2010.

        Certain assets of our idled South Carolina fabrication facility were analyzed for impairment in the fourth quarter of 2010 as discussed in Note 1, resulting in an impairment charge of $12.8 million. The $9.2 million then current fair value (and new cost basis) was determined utilizing market and cost approaches (Level 2).

87

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 8. Commitments and Contingencies

        The company has entered into certain commitments with suppliers which are of a customary nature. Commitments have been entered into relating to future expected requirements for such commodities as fuel, zinc, iron concentrate, electricity, natural gas, and natural gas transportation services. Certain commitments contain provisions which require that the company "take or pay" for specified quantities at fixed prices; or in the case of iron concentrate, at market prices; without regard to actual usage for periods of up to 24 months for physical commodity requirements and for up to 9 years for commodity transportation requirements.

        The company's commitments for these agreements with "take or pay" or other similar commitment provisions for the years ending December 31, as follows (in thousands):

2012	$	122,705
2013		10,237
2014		1,737
2015		1,561
2016		1,561
Thereafter		5,197
	$	142,998

        The company utilized such "take or pay" requirements during the past three years under these contracts. The company believes that production requirements will be such that consumption of the products or services purchased under these commitments will occur in the normal production process. The company purchases its electricity consumed at its Flat Roll Division pursuant to a contract which extends through December 2012, and designates 160 hours annually as "interruptible service." The contract also establishes an agreed fixed-rate energy charge per Mill/kWh consumed for each year through the expiration of the agreement.

        At December 31, 2011, the company has outstanding commitments of $32.8 million related to ongoing construction of property, plant, and equipment related primarily to steel operations, and metals recycling and ferrous resources operations. The company's commitments for operating leases are discussed in Note 11.

        We are involved in various routine litigation matters, including administrative proceedings, regulatory proceedings, governmental investigations, environmental matters, and commercial and construction contract disputes.

        We are also involved, along with eight other steel manufacturing companies, in a class action antitrust complaint filed in federal court in Chicago, Illinois that alleges a conspiracy to fix, raise, maintain and stabilize the price at which steel products were sold in the United States starting in 2005, by artificially restricting the supply of such steel products. All but one of the Complaints purport to be brought on behalf of a class consisting of all direct purchasers of steel products between January 1, 2005, and the present. The other Complaint purports to be brought on behalf of a class consisting of all indirect purchasers of steel products within the same time period. In addition, on December 28, 2010, we and the other co-defendants were served with a substantially similar complaint in the Circuit Court of Cocke County, Tennessee, purporting to be on behalf of indirect purchasers of steel products in Tennessee. The case has been removed to federal court. All Complaints seek treble damages and costs, including reasonable attorney fees, pre- and post-judgment interest and injunctive relief. On January 2,

88

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 8. Commitments and Contingencies (Continued)

2009, Steel Dynamics and the other defendants filed a Joint Motion to Dismiss all of the direct purchaser lawsuits. On June 12, 2009, however, the Court denied the Motion. The parties are currently conducting discovery related primarily to class certification matters. Due to the uncertain nature of litigation, we cannot presently determine the ultimate outcome of this litigation, however we have determined, based on the information available at this time, that there is not presently a "reasonable possibility" (as that term is defined in ASC 450-20-20), that the outcome of these legal proceedings would have a material impact on our financial condition, results of operations, or liquidity.

        Although not presently necessary or appropriate to make a dollar estimate of exposure to loss, if any, in connection with the above matter, we may in the future determine that a loss accrual is necessary. Although we may make loss accruals, if and as warranted, any amounts that we may accrue from time to time could vary significantly from the amounts we actually pay, due to inherent uncertainties and the inherent shortcomings of the estimation process, the uncertainties involved in litigation and other factors. Additionally, an adverse result could have a material effect on our financial condition, results of operations and liquidity.

Note 9. Transactions with Affiliated Companies

        The company sells flat rolled products and occasionally purchases ferrous materials from Heidtman. The president and chief executive officer of Heidtman is a member of the company's board of directors and a stockholder of the company. Transactions with Heidtman for the years ended December 31, are as follows (in thousands):

	2011			2010			2009
Sales	$	242,300		$	202,897		$	132,272
Percentage of consolidated net sales		3	%		3	%		3	%
Accounts receivable		35,646			31,544			26,983
Purchases		18,998			18,275			11,864
Accounts payable		882			969			468

        On September 15, 2009, the company purchased from Heidtman a 32 acre tract of land adjacent to the company's Flat Roll Division in Butler, Indiana, together with a 387,000 square foot building for a purchase price of $9.3 million. Contemporaneously the company purchased from Heidtman equipment located at this site for a purchase price of $18.6 million. Immediately following the acquisition of this property, the company leased the real estate and equipment to Heidtman for a term of five years commencing on September 15, 2009, and terminating on August 31, 2014. Heidtman pays the company a monthly rental for the real estate and for the equipment. The real estate and equipment have been used, and will continue to be used, by Heidtman in its steel processing operations.

        The company also purchases and sells recycled and scrap metal with other smaller affiliated companies. These transactions are as follows (in thousands):

	2011		2010		2009
Sales	$	36,486	$	37,057	$	16,156
Accounts receivable		7,247		6,577		3,573
Purchases		239,395		177,166		81,926
Accounts payable		5,702		12,601		6,297

89

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 10. Retirement Plans

        The company sponsors several 401(k) retirement savings and profit sharing plans for eligible employees, which are considered "qualified plans" for federal income tax purposes. The company's total expense for the plans was $37.2 million, $22.9 million, and $5.3 million for the years ended December 31, 2011, 2010, and 2009, respectively. The company's profit sharing component consists of 2% of consolidated pretax earnings plus a unique percentage of each of the company's operating segments' pretax earnings after allocation of certain corporate expenses. The resulting total profit sharing component was $35.1 million, $21.1 million, and $2.2 million for the years ended December 31, 2011, 2010, and 2009, respectively, of which 50% each year was contributed to the Plans, at the discretion of the company, and the other 50% was paid directly to the Plans' participants.

Note 11. Leases

        The company has operating leases principally relating to transportation equipment, real estate, and office equipment. Certain leases include escalation clauses, and/or purchase options. The company paid $16.8 million, $15.4 million, and $15.3 million for operating leases for the years ended December 31, 2011, 2010, and 2009, respectively. At December 31, 2011, future minimum payments for all non-cancelable operating leases with an initial or remaining term of one year or more are as follows (in thousands):

2012	$	11,874
2013		9,000
2014		6,507
2015		4,609
2016		3,870
Thereafter		5,506
	$	41,366

Note 12. Segment Information

        The company has three reportable segments: steel operations, metals recycling and ferrous resources operations, and steel fabrication operations. These operations are described in Note 1 to the financial statements. Revenues included in the category "Other" are from subsidiary operations that are below the quantitative thresholds required for reportable segments and primarily consist of further processing, slitting, and sale of certain steel products and the resale of certain secondary and excess steel products. In addition, "Other" also includes certain unallocated corporate accounts, such as the company's senior secured credit facility, senior notes, convertible senior notes, certain other investments and certain profit sharing expenses.

        The company's operations are primarily organized and managed by operating segment. Operating segment performance and resource allocations are primarily based on operating results before income taxes. The accounting policies of the reportable segments are consistent with those described in Note 1 to the financial statements. Intra-segment sales and any related profits are eliminated in consolidation.

90

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 12. Segment Information (Continued)

        The company's segment results for the years ended December 31, are as follows (in thousands):

For the Year Ended December 31, 2011	Steel Operations		Metals Recycling / Ferrous Resources			Steel Fabrication Operations			Other			Eliminations			Consolidated
Net Sales
External	$	4,676,898	$	2,473,511		$	275,783		$	92,856		$	—		$	7,519,048
External Non-U.S.		182,319		295,552			—			581			—			478,452
Other segments		211,089		1,383,505			625			11,711			(1,606,930	)		—
		5,070,306		4,152,568			276,408			105,148			(1,606,930	)		7,997,500
Operating income (loss)		658,120		26,597			(6,584	)		(95,141)	(1)		1,828	(2)		584,820
Income (loss) before income taxes		574,108		(16,706	)		(13,573	)		(121,233	)		1,723			424,319
Depreciation and amortization		108,477		101,893			6,751			5,690			(204	)		222,607
Capital expenditures		43,998		103,142			2,205			17,662			—			167,007
As of December 31, 2011
Assets		2,598,767		2,561,722			227,663			789,322	(3)		(198,248)	(4)		5,979,226
Liabilities		495,425		528,629			13,768			2,759,894	(5)		(189,084)	(6)		3,608,632

Footnotes related to the twelve months ended December 31, 2011 segment results (in millions):

(1)	Corporate SG&A	$	(46.7	)	(2)	Gross profit increase from intra-company sales	$	1.8
	Company-wide stock option expense		(14.8	)
	Profit sharing		(35.1	)
	Other, net		1.5
		$	(95.1	)
(3)	Cash and equivalents	$	314.9		(4)	Elimination of intra-company receivables	$	(36.1	)
	Investments in short-term commercial paper		84.8			Elimination of intra-company debt		(152.8	)
	Income taxes receivable		16.7			Other		(9.3	)
	Deferred income taxes		25.3				$	(198.2	)
	Property, plant and equipment, net		85.7
	Debt issuance costs		23.9
	Intra-company debt		152.8
	Other		85.2
		$	789.3
(5)	Accounts payable	$	28.7		(6)	Elimination of intra-company payables	$	(36.1	)
	Income taxes payable		11.1			Elimination of intra-company debt		(152.8	)
	Accrued interest		33.7			Other		(0.2	)
	Accrued profit sharing		35.8				$	(189.1	)
	Debt		2,341.9
	Deferred income taxes		217.6
	Other		91.1
		$	2,759.9

91

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 12. Segment Information (Continued)

For the Year Ended December 31, 2010	Steel Operations		Metals Recycling / Ferrous Resources			Steel Fabrication Operations			Other			Eliminations			Consolidated
Net Sales
External	$	3,726,869	$	1,966,518		$	177,055		$	77,742		$	—		$	5,948,184
External Non-U.S.		103,061		248,870			—			772			—			352,703
Other segments		169,709		963,644			323			9,841			(1,143,517	)		—
		3,999,639		3,179,032			177,378			88,355			(1,143,517	)		6,300,887
Operating income (loss)		439,795		19,686			(25,056	)		(66,189	)(1)		(3,483	)(2)		364,753
Income (loss) before income taxes		363,352		(26,988	)		(30,539	)		(88,007	)		(4,359	)		213,459
Depreciation and amortization		112,471		102,027			5,894			4,493			(187	)		224,698
Capital expenditures		51,695		55,982			492			28,857			(3,632	)		133,394
As of December 31, 2010
Assets(7)		2,551,885		2,464,835			206,810			562,961	(3)		(196,557	)(4)		5,589,934
Liabilities(7)		422,764		444,170			18,361			2,746,798	(5)		(173,289	)(6)		3,458,804

Footnotes related to the twelve months ended December 31, 2010 segment results (in millions):

(1)	Corporate SG&A	$	(31.6	)	(2)	Gross profit reduction from intra-company sales	$	(3.5	)
	Company-wide stock option expense		(12.5	)
	Profit sharing		(21.1	)
	Other, net		(1.0	)
		$	(66.2	)
(3)	Cash and equivalents	$	175.3		(4)	Elimination of intra-company receivables	$	(36.0	)
	Income taxes receivable		37.3			Elimination of intra-company debt		(134.8	)
	Deferred income taxes		20.7			Other		(25.8	)
	Property, plant and equipment, net		70.7				$	(196.6	)
	Debt issuance costs		23.3
	Intra-company debt		134.8
	Other		100.9
		$	563.0
(5)	Accounts payable	$	32.5		(6)	Elimination of intra-company payables	$	(36.0	)
	Income taxes payable		5.2			Elimination of intra-company debt		(134.8	)
	Accrued interest		33.7			Other		(2.5	)
	Accrued profit sharing		21.5				$	(173.3	)
	Debt		2,341.0
	Deferred income taxes		242.7
	Other		70.2
		$	2,746.8

(7)

Certain segment deferred tax asset and liability accounts have been reclassified at December 31, 2010, to conform to the December 31, 2011 presentation. These reclassifications had no impact to the previously reported segment income statement information or consolidated income statements as previously reported, nor did they impact previously reported consolidated total assets or liabilities.

92

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 12. Segment Information (Continued)

For the Year Ended December 31, 2009	Steel Operations		Metals Recycling / Ferrous Resources			Steel Fabrication Operations			Other			Eliminations			Consolidated
Net Sales
External	$	2,443,709	$	1,121,803		$	156,499		$	50,937		$	—		$	3,772,948
External Non-U.S.		67,394		118,351			—			113			—			185,858
Other segments		95,866		441,979			1,509			5,796			(545,150	)		—
		2,606,969		1,682,133			158,008			56,846			(545,150	)		3,958,806
Operating income (loss)		196,225		(4,709	)		(6,356	)		(45,356	)(1)		(20,273	)(2)		119,531
Income (loss) before income taxes		127,701		(42,360	)		(11,861	)		(68,793	)		(22,924	)		(18,237	)
Depreciation and amortization		104,184		105,627			6,060			5,555			—			221,426
Capital expenditures		68,968		251,695			(473	)		12,443			(2,581	)		330,052
As of December 31, 2009
Assets(7)		2,373,700		2,318,827			169,416			469,389	(3)		(201,460	)(4)		5,129,872
Liabilities(7)		330,949		453,225			25,208			2,514,423	(5)		(197,198	)(6)		3,126,607

Footnotes related to the twelve months ended December 31, 2009 segment results (in millions):

(1)	Corporate SG&A	$	(26.5	)	(2)	Gross profit reduction from intra-company sales	$	(20.3	)
	Company-wide stock option expense		(13.2	)
	Profit Sharing		(2.2	)
	Other, net		(3.5	)
		$	(45.4	)
(3)	Income taxes receivable	$	137.0		(4)	Elimination of intra-company receivables	$	(27.0	)
	Deferred income taxes		21.5			Elimination of intra-company debt		(174.9	)
	Property, plant and equipments, net		44.5			Other		0.4
	Debt issuance costs		24.0				$	(201.5	)
	Intra-company debt receivable		174.9
	Other		67.5
		$	469.4
(5)	Accounts payable	$	37.8		(6)	Elimination of intra-company payables	$	(27.0	)
	Income taxes payable		5.7			Elimination of intra-company debt		(174.9	)
	Accrued interest		27.3			Other		4.7
	Accrued profit sharing		2.3				$	(197.2	)
	Debt		2,158.2
	Deferred income taxes		220.9
	Other		62.2
		$	2,514.4

(7)

Certain segment deferred tax asset and liability accounts have been reclassified at December 31, 2009, to conform to the December 31, 2011 presentation. These reclassifications had no impact to the previously reported segment income statement information or consolidated income statements as previously reported, nor did they impact previously reported consolidated total assets or liabilities.

93

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 13. Condensed Consolidating Information

        Certain 100%-owned subsidiaries of SDI have fully and unconditionally guaranteed all of the indebtedness relating to the issuance of the company's senior notes due 2012, 2014, 2015, 2016 and 2020. Following are the company's condensed consolidating financial statements, including the guarantors, which present the financial position, results of operations and cash flows of (i) SDI (in each case, reflecting investments in its consolidated subsidiaries under the equity method of accounting), (ii) the guarantor subsidiaries of SDI, (iii) the non-guarantor subsidiaries of SDI, and (iv) the eliminations necessary to arrive at the information on a consolidated basis. The following statements should be read in conjunction with the accompanying consolidated financial statements, and notes thereto.

Condensed Consolidating Balance Sheets (in thousands)

As of December 31, 2011	Parent			Guarantors		Combined Non-Guarantors			Consolidating Adjustments			Total Consolidated
Cash and equivalents	$	301,073		$	58,699	$	30,989		$	—		$	390,761
Investments in short-term commercial paper		84,830			—		—			—			84,830
Accounts receivable, net		319,995			726,192		8,971			(332,367	)		722,791
Inventories		584,079			533,022		85,046			(2,563	)		1,199,584
Other current assets		83,116			4,119		2,304			(32,247	)		57,292
Total current assets		1,373,093			1,322,032		127,310			(367,177	)		2,455,258
Property, plant and equiment, net		1,059,011			660,048		477,514			(2,828	)		2,193,745
Intangible assets, net		—			450,893		—			—			450,893
Goodwill		—			745,066		—			—			745,066
Other assets, including investments in subs		2,791,718			33,507		9,853			(2,700,814	)		134,264
Total assets	$	5,223,822		$	3,211,546	$	614,677		$	(3,070,819	)	$	5,979,226
Accounts payable	$	155,220		$	273,049	$	23,195		$	(30,640	)	$	420,824
Accrued expenses		157,868			98,498		10,012			(30,863	)		235,515
Current maturities of long-term debt		439,199			300		53,551			(48,972	)		444,078
Total current liabilities		752,287			371,847		86,758			(110,475	)		1,100,417
Long-term debt		1,905,199			—		169,797			(138,974	)		1,936,022
Other liabilities		250,395			2,132,778		51,625			(1,862,605	)		572,193
Redeemable noncontrolling interest		—			—		70,694			—			70,694
Common stock		636			33,896		18,121			(52,017	)		636
Treasury stock		(722,653	)		—		—			—			(722,653	)
Additional paid-in-capital		1,026,157			117,737		347,151			(464,888	)		1,026,157
Retained earnings (deficit)		2,011,801			555,288		(113,428	)		(441,860	)		2,011,801
Total Steel Dynamics, Inc. equity		2,315,941			706,921		251,844			(958,765	)		2,315,941
Noncontrolling interests		—			—		(16,041	)		—			(16,041	)
Total equity		2,315,941			706,921		235,803			(958,765	)		2,299,900
Total liabilities and equity	$	5,223,822		$	3,211,546	$	614,677		$	(3,070,819	)	$	5,979,226

94

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 13. Condensed Consolidating Information (Continued)

Condensed Consolidating Balance Sheets (in thousands)

As of December 31, 2010	Parent			Guarantors		Combined Non-Guarantors			Consolidating Adjustments			Total Consolidated
Cash and equivalents	$	173,563		$	10,628	$	2,322		$	—		$	186,513
Accounts receivable, net		283,883			614,412		7,282			(283,388	)		622,189
Inventories		548,726			487,298		84,183			(6,144	)		1,114,063
Other current assets		96,040			9,757		3,444			(32,003	)		77,238
Total current assets		1,102,212			1,122,095		97,231			(321,535	)		2,000,003
Property, plant and equiment, net		1,110,350			684,118		421,897			(3,032	)		2,213,333
Intangible assets, net		—			489,240		—			—			489,240
Goodwill		—			751,675		—			—			751,675
Other assets, including investments in subs(1)		2,788,097			36,617		7,601			(2,696,632	)		135,683
Total assets	$	5,000,659		$	3,083,745	$	526,729		$	(3,021,199	)	$	5,589,934
Accounts payable	$	127,246		$	227,823	$	26,015		$	(32,483	)	$	348,601
Accrued expenses		123,498			102,114		8,497			(30,317	)		203,792
Current maturities of long-term debt		7,554			325		34,604			(33,559	)		8,924
Total current liabilities		258,298			330,262		69,116			(96,359	)		561,317
Long-term debt		2,344,399			—		168,278			(134,780	)		2,377,897
Other liabilities(1)		305,092			2,158,725		27,072			(1,971,298	)		519,591
Redeemable noncontrolling interest		—			—		54,294			—			54,294
Common stock		633			33,901		16,121			(50,022	)		633
Treasury stock		(727,624	)		—		—			—			(727,624	)
Additional paid-in-capital		998,728			117,737		256,905			(374,642	)		998,728
Retained earnings (deficit)		1,821,133			443,120		(49,022	)		(394,098	)		1,821,133
Total Steel Dynamics, Inc. equity		2,092,870			594,758		224,004			(818,762	)		2,092,870
Noncontrolling interests		—			—		(16,035	)		—			(16,035	)
Total equity		2,092,870			594,758		207,969			(818,762	)		2,076,835
Total liabilities and equity	$	5,000,659		$	3,083,745	$	526,729		$	(3,021,199	)	$	5,589,934

(1)

Certain deferred tax asset and liability accounts have been reclassified at December 31, 2010, to conform to the December 31, 2011 presentation. These reclassifications had no impact to previously reported equity or total consolidated amounts.

95

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 13. Condensed Consolidating Information (Continued)

Condensed Consolidating Statements of Operations (in thousands)

For the Year Ended, December 31, 2011	Parent			Guarantors			Combined Non-Guarantors			Consolidating Adjustments			Total Consolidated
Net sales	$	3,701,928		$	9,062,305		$	190,739		$	(4,957,472	)	$	7,997,500
Costs of goods sold		3,099,941			8,604,620			251,528			(4,890,107	)		7,065,982
Gross profit (loss)		601,987			457,685			(60,789	)		(67,365	)		931,518
Selling, general and administrative		135,509			217,717			9,184			(15,712	)		346,698
Operating income (loss)		466,478			239,968			(69,973	)		(51,653	)		584,820
Interest expense, net of capitalized interest		104,008			71,487			8,784			(7,302	)		176,977
Other (income) expense, net		(12,663	)		(8,012	)		(3,209	)		7,408			(16,476	)
Income (loss) before income taxes and equity in net income of subsidiaries		375,133			176,493			(75,548	)		(51,759	)		424,319
Income taxes (benefit)		111,532			66,734			(151	)		(19,488	)		158,627
		263,601			109,759			(75,397	)		(32,271	)		265,692
Equity in net income of subsidiaries		14,519			—			—			(14,519	)		—
Net loss attributable to noncontrolling interests		—			—			12,428			—			12,428
Net income (loss) attributable to Steel Dynamics, Inc.	$	278,120		$	109,759		$	(62,969	)	$	(46,790	)	$	278,120

For the Year Ended, December 31, 2010	Parent			Guarantors			Combined Non-Guarantors			Consolidating Adjustments			Total Consolidated
Net sales	$	2,866,541		$	7,067,399		$	118,141		$	(3,751,194	)	$	6,300,887
Costs of goods sold		2,467,780			6,701,621			164,400			(3,708,580	)		5,625,221
Gross profit (loss)		398,761			365,778			(46,259	)		(42,614	)		675,666
Selling, general and administrative		98,410			215,723			8,724			(11,944	)		310,913
Operating income (loss)		300,351			150,055			(54,983	)		(30,670	)		364,753
Interest expense, net of capitalized interest		99,639			67,659			13,168			(10,237	)		170,229
Other (income) expense, net		(14,629	)		(15,123	)		(296	)		11,113			(18,935	)
Income (loss) before income taxes and equity in net income of subsidiaries		215,341			97,519			(67,855	)		(31,546	)		213,459
Income taxes (benefit)		84,718			36,325			(26,477	)		(10,706	)		83,860
		130,623			61,194			(41,378	)		(20,840	)		129,599
Equity in net income of subsidiaries		10,086			—			—			(10,086	)		—
Net loss attributable to noncontrolling interests		—			—			11,110			—			11,110
Net income (loss) attributable to Steel Dynamics, Inc.	$	140,709		$	61,194		$	(30,268	)	$	(30,926	)	$	140,709

96

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 13. Condensed Consolidating Information (Continued)

For the Year Ended, December 31, 2009	Parent			Guarantors			Combined Non-Guarantors			Consolidating Adjustments			Total Consolidated
Net sales	$	1,790,451		$	4,334,533		$	54,053		$	(2,220,231	)	$	3,958,806
Costs of goods sold		1,628,271			4,055,388			52,996			(2,176,925	)		3,559,730
Gross profit (loss)		162,180			279,145			1,057			(43,306	)		399,076
Selling, general and administrative		68,633			208,847			15,057			(12,992	)		279,545
Operating income (loss)		93,547			70,298			(14,000	)		(30,314	)		119,531
Interest expense, net of capitalized interest		83,297			58,049			735			(721	)		141,360
Other (income) expense, net		49,255			(55,700	)		9			2,844			(3,592	)
Income (loss) before income taxes and equity in net income of subsidiaries		(39,005	)		67,949			(14,744	)		(32,437	)		(18,237	)
Income taxes (benefit)		(15,438	)		26,894			(5,835	)		(12,839	)		(7,218	)
		(23,567	)		41,055			(8,909	)		(19,598	)		(11,019	)
Equity in net income of subsidiaries		15,383			—			—			(15,383	)		—
Net loss attributable to noncontrolling interests		—			—			2,835			—			2,835
Net income (loss) attributable to Steel Dynamics, Inc.	$	(8,184	)	$	41,055		$	(6,074	)	$	(34,981	)	$	(8,184	)

Condensed Consolidating Statements of Cash Flows (in thousands)

For the Year Ended, December 31, 2011	Parent			Guarantors			Combined Non-Guarantors			Consolidating Adjustments			Total Consolidated
Net cash provided by (used in) operating activities	$	380,171		$	173,574		$	(68,110	)	$	720		$	486,355
Net cash provided by (used in) investing activities		(230,314	)		(50,576	)		(65,144	)		110,197			(235,837	)
Financing activities
Issuance of long term debt		—			10,103			101,686			(101,686	)		10,103
Repayments of long term debt		(6,505	)		(1,075	)		(82,241	)		82,081			(7,740	)
Other		(15,842	)		(83,955	)		142,476			(91,312	)		(48,633	)
Net cash provided by (used in) financing activities		(22,347	)		(74,927	)		161,921			(110,917	)		(46,270	)
Increase in cash and equivalents		127,510			48,071			28,667			—			204,248
Cash and equivalents at beginning of period		173,563			10,628			2,322			—			186,513
Cash and equivalents at end of period	$	301,073		$	58,699		$	30,989		$	—		$	390,761

97

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 13. Condensed Consolidating Information (Continued)

For the Year Ended, December 31, 2010	Parent			Guarantors			Combined Non-Guarantors			Consolidating Adjustments			Total Consolidated
Net cash provided by (used in) operating activities	$	262,155		$	17,011		$	(109,221	)	$	(638	)	$	169,307
Net cash provided by (used in) investing activities		(38,811	)		(51,414	)		(59,491	)		638			(149,078	)
Financing activities
Issuance of long term debt		554,001			—			110,743			(108,191	)		556,553
Repayments of long term debt		(361,383	)		14,979			(559	)		—			(346,963	)
Other		(242,829	)		23,690			58,634			108,191			(52,314	)
Net cash provided by (used in) financing activities		(50,211	)		38,669			168,818			—			157,276
Increase in cash and equivalents		173,133			4,266			106			—			177,505
Cash and equivalents at beginning of period		430			6,362			2,216			—			9,008
Cash and equivalents at end of period	$	173,563		$	10,628		$	2,322		$	—		$	186,513

For the Year Ended, December 31, 2009	Parent			Guarantors			Combined Non-Guarantors			Consolidating Adjustments			Total Consolidated
Net cash provided by (used in) operating activities	$	261,605		$	176,382		$	(38,811	)	$	46,380		$	445,556
Net cash provided by (used in) investing activities		(77,069	)		(71,998	)		(227,459	)		2,581			(373,945	)
Financing activities
Issuance of long term debt		1,219,500			—			227,831			(178,896	)		1,268,435
Repayments of long term debt		(1,699,972	)		9,486			(71	)		—			(1,690,557	)
Other		294,977			(119,022	)		37,396			129,935			343,286
Net cash provided by (used in) financing activities		(185,495	)		(109,536	)		265,156			(48,961	)		(78,836	)
Decrease in cash and equivalents		(959	)		(5,152	)		(1,114	)		—			(7,225	)
Cash and equivalents at beginning of period		1,389			11,514			3,330			—			16,233
Cash and equivalents at end of period	$	430		$	6,362		$	2,216		$	—		$	9,008

98

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

Note 14. Quarterly Financial Information (unaudited, in thousands, except per share data)

	1st Quarter		2nd Quarter		3rd Quarter		4th Quarter
2011:
Net sales	$	2,015,969	$	2,079,731	$	2,043,455	$	1,858,345
Gross profit		295,754		276,386		199,243		160,135
Operating income		205,326		188,219		108,785		82,490
Net income		104,230		95,826		39,857		25,779
Net income attributable to Steel Dynamics, Inc.		105,903		98,710		43,304		30,203
Earnings per share:
Basic		.49		.45		.20		.14
Diluted		.46		.43		.19		.14
2010:
Net sales	$	1,555,790	$	1,632,799	$	1,584,164	$	1,528,134
Gross profit		210,482		191,984		139,532		133,668
Operating income		132,297		116,635		69,000		46,821
Net income		63,389		46,797		15,355		4,058
Net income attributable to Steel Dynamics, Inc.		64,969		49,207		18,741		7,792
Earnings per share:
Basic		.30		.23		.09		.04
Diluted		.29		.22		.09		.04

        Earnings per share are computed independently for each of the quarters presented. Therefore, the sum of the quarterly earnings per share may not equal the total for the year.

99

ITEM 9.    CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

        None.

ITEM 9A.    CONTROLS AND PROCEDURES

(a)   Evaluation of Disclosure Controls and Procedures.

        As required, we carried out an evaluation, under the supervision and with the participation of our principal executive officer and principal financial officer, of the effectiveness of our disclosure controls and procedures, as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the Exchange Act). Based on this evaluation, our principal executive officer and principal financial officer concluded that, as of December 31, 2011, the end of the period covered by this annual report, our disclosure controls and procedures were designed to provide and were effective to provide reasonable assurance that the information required to be disclosed by us in the reports we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the applicable rules and forms, and that it is accumulated and communicated to our management, including our principal executive and principal financial officer, as appropriate to allow timely decisions regarding required disclosure.

        Management's report on our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) and the independent registered public accounting firm's related audit report are included in Item 8 of this Form 10-K and are incorporated herein by reference.

(b)   Changes in Internal Control Over Financial Reporting.

        No change in our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) occurred during the fiscal quarter ended December 31, 2011 that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

        Our Management's Report on Internal Control Over Financial Reporting, as of December 31, 2011, can be found on page 48 of this Form 10-K, and the related Report of Our Independent Registered Public Accounting Firm, Ernst & Young LLP, can be found on page 49 of this Form 10-K, each of which is incorporated by reference into this Item 9A.

ITEM 9B.    OTHER INFORMATION

        None.

100

PART III

ITEM 10.    DIRECTORS, EXECUTIVE OFFICERS, AND CORPORATE GOVERANCE

        The information required to be furnished pursuant to Item 10 with respect to directors is incorporated herein by reference from the section entitled "Election of Directors" in our Proxy Statement for the 2012 Annual Meeting of Shareholders, which we will file with the Securities and Exchange Commission no later than 120 days after the end of our fiscal year.

ITEM 11.    EXECUTIVE COMPENSATION

        The information required to be furnished pursuant to Item 11 with respect to executive compensation is incorporated herein by reference from the section entitled "Executive Compensation" in our Proxy Statement for the 2012 Annual Meeting of Shareholders, which we will file with the Securities and Exchange Commission no later than 120 days after the end of our fiscal year.

ITEM 12.    SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

        The information relating to security ownership of certain beneficial owners and management required by Item 12 is incorporated herein by reference from the section entitled "Information on Directors and Executive Officers" in our Proxy Statement for the 2012 Annual Meeting of Shareholders, which we will file with the Securities and Exchange Commission no later than 120 days after the end of our fiscal year. The Equity Compensation Plan Information required by Item 12 is set forth in the table below.

Equity Compensation Plan Information

        Our stockholders approved the Steel Dynamics, Inc. 2006 Equity Incentive Plan (2006 Plan) at our annual meeting of stockholders held May 18, 2006. Our stockholders approved the Steel Dynamics, Inc. 2008 Equity Incentive Compensation Plan (2008 Plan) at our annual meeting of stockholders held May 22, 2008. The following table summarizes information about our equity compensation plans at December 31, 2011:

Plan Category	(a) Number of securities to be issued upon exercise of outstanding options, warrants and rights		(b) Weighted-average exercise price of outstanding options, warrants and rights		(c) Number of securities remaining available for future issuance under equity compensation plans (excluding securities reflected in column (a))
Equity compensation plans approved by security holders		8,902,425	$	15.10		2,912,222
Equity compensation plans not approved by security holders		—		—		—

ITEM 13.    CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

        The information required to be furnished pursuant to Item 13 with respect to certain relationships and related transactions is incorporated herein by reference from the section entitled "Certain Relationships and Related Transactions" in our Proxy Statement for the 2012 Annual Meeting of Shareholders, which we will file with the Securities and Exchange Commission no later than 120 days after the end of our fiscal year.

101

ITEM 14.    PRINCIPAL ACCOUNTANT FEES AND SERVICES

        The information required to be furnished pursuant to Item 14 with respect to principal accountant fees and services is incorporated herein by reference from the section entitled "Principal Accounting Fees and Services" in our Proxy Statement for the 2012 Annual Meeting of Shareholders, which we will file with the Securities and Exchange Commission no later than 120 days after the end of our fiscal year.

PART IV

ITEM 15.    EXHIBITS AND FINANCIAL STATEMENT SCHEDULES

(a)

The following documents are filed as a part of this report:

1.

Financial Statements:

See the Audited Consolidated Financial Statements of Steel Dynamics Inc. included as part of Item 8 and described in the Index on page 45 of this Report.

2.

Financial Statement Schedules: All schedules for which provision is made in the applicable regulations of the Securities and Exchange Commission are not required under the related instructions or are inapplicable and therefore have been omitted.

(b)

Exhibits:

Articles of Incorporation
3.1a	Amended and Restated Articles of Incorporation of Steel Dynamics, Inc., incorporated herein by reference from Exhibit 3.1a in our Registration Statement on Form S-1, SEC File No. 333-12521, effective November 21, 1996.
3.1b	Amendment to Article IV of the Amended and Restated Articles of Incorporation of Steel Dynamics, Inc., effective March 27, 2008, increasing the authorized common shares to 400 million, incorporated herein by reference from quarterly report on Form 10-Q, filed May 7, 2008.
3.1d	Amendment to Article IV of the Amended and Restated Articles of Incorporation of Steel Dynamics, Inc., effective June 2, 2009, increasing the authorized common shares to 900 million, incorporated herein by reference to Exhibit 3.1 to our Form 8-K filed June 2, 2009.
3.2a	Amended and Restated Bylaws of Steel Dynamics, Inc., incorporated herein by reference from Exhibit 3.1 to our Form 8-K filed July 6, 2006.
3.2b	Amended and Restated Bylaws of Steel Dynamics, Inc., incorporated herein by reference from Exhibit 99.1 to our Form 8-K filed August 6, 2009.
Instruments Defining the Rights of Security Holders, Including Indentures
4.6	Indenture relating to our issuance of $500 million of 63/4% Senior Notes due 2015, between Steel Dynamics, Inc. and the Bank of New York Trust Company, N.A., as trustee, dated as of April 3, 2007, incorporated herein by reference to Exhibit 4.7 to our Form 8-K filed April 3, 2007.

102

4.8	Indenture relating to our issuance of $700 million of 73/8% Senior Notes due 2012, dated as of October 12, 2007, between Steel Dynamics, Inc. as Issuer, and the Initial Subsidiary Guarantors, and The Bank of New York Trust Company N.S., as Trustee, incorporated herein by reference from Exhibit 4.9 to our Form 10-Q filed November 9, 2007.
4.10	Indenture relating to our issuance of $375 million of 73/4% Senior Notes due 2016, dated as of April 3, 2008, between Steel Dynamics, Inc., as Issuer, the Initial Subsidiary Guarantors, and Wells Fargo Bank, National Association, as Trustee, incorporated herein by reference from our Exhibit 4.7 to our Form 8-K filed April 8, 2008.
4.10a	First Supplemental Indenture relating to our issuance of $125 million of 73/4% Senior Notes due 2016, dated as of April 18, 2008, between Steel Dynamics, Inc., as Issuer and the Initial Subsidiary Guarantors, and Wells Fargo Bank, National Association, as Trustee, incorporated herein by reference from our Exhibit 4.12 to our Form 8-K filed April 22, 2008.
4.11c	Automatic Exchange and Withdrawal of Form S-4 Exchange Offer Registration Statement of Unrestricted 73/4% Senior Notes due April 15, 2016, incorporated herein by reference to our Form 8-K filed December 31, 2009.
4.14	Indenture relating to our issuance of $350 million of 75/8% Senior Notes due 2020, dated as of March 17, 2010, between Steel Dynamics, Inc., as Issuer, the Initial Subsidiary Guarantors, and Wells Fargo Bank, National Association, as Trustee, incorporated herein by reference from our Exhibit 4.14 to our Form 8-K filed March 18, 2010.
Material Contracts
10.3	Amended and Restated Credit Agreement among Steel Dynamics, Inc. and various lenders, dated as of June 19, 2007, incorporated herein by reference from Exhibit 10.3 to our 8-K filed June 21, 2007.
10.3a	Amendment No. 2 to our Amended and Restated Credit Agreement, dated September 11, 2007, incorporated herein by reference from Exhibit 10.3a to our 8-K filed September 14, 2007.
10.03b	Amendment No. 3 to our Amended and Restated Credit Agreement and Amendment No. 1 to the Amended and Restated Security Agreement dated March 31, 2008, relating to the Credit Agreement described in Exhibit 10.03, filed June 21, 2007, incorporated herein by reference from our Exhibit 10.03b to our Form 8-K filed April 2, 2008.
10.3c	Amendment No. 4 to our Amended and Restated Credit Agreement, dated June 12, 2009, incorporated herein by reference from Exhibit 10.3c to our 8-K filed June 21, 2009.
10.3d	Amendment No. 5 to our Amended and Restated Credit Agreement, dated April 26, 2010, incorporated herein by reference from Exhibit 10.3d to our 8-K filed April 27, 2010.
10.3e	Amendment No. 6 to our Amended and Restated Credit Agreement, dated January 21, 2011, incorporated herein by reference from Exhibit 10.3e to our 2010 Form 10-K filed February 23, 2011.

103

10.6		Agreement and Plan of Merger among The Techs Holdings, Inc. and Steel Dynamics, Inc., dated as of June 6, 2007, incorporated herein by reference from Exhibit 10.6 to our 8-K filed July 6, 2007.
10.7		Shareholders Agreement, dated as of October 26, 2007, by and among Steel Dynamics, Inc. and the Shareholders of OmniSource Corporation, incorporated herein by reference from Exhibit 10.7 to our 8-K/A filed November 6, 2007.
10.8		Real Estate Purchase Agreement and Master Lease Agreement entered into with HS Processing and Heidtman Steel Products, Inc., described in Item 8.01 and incorporated herein by reference to our 8-K filed September 21, 2009.
10.12		Loan Agreement between Indiana Development Finance Authority and Steel Dynamics, Inc. re Taxable Economic Development Revenue bonds, Trust Indenture between Indiana Development Finance Authority and NBD Bank, N.A., as Trustee re Loan Agreement between Indiana Development Finance Authority and Steel Dynamics, Inc., incorporated herein by reference from Exhibit 10.12 to Registrant's Registration Statement on Form S-1, File No. 333-12521, effective November 21, 1996.
10.24	†	2003 Executive Incentive Compensation Plan, approved by stockholders on May 29, 2003, incorporated herein by reference from our Exhibit 10.24 to our 2003 Annual Report on Form 10-K, filed March 12, 2004.
10.25	†	2004 Employee Stock Purchase Plan, approved by stockholders on May 20, 2004, incorporated herein by reference from our Exhibit 10.25 to our 2004 Annual Report on Form 10-K, filed March 4, 2005.
10.41	†	2006 Equity Incentive Plan, approved by stockholders on May 18, 2006, incorporated herein by reference from our Form 10-K filed February 26, 2007.
10.41a		Steel Dynamics, Inc. 2006 Equity Incentive Plan, as amended, incorporated herein by reference from Exhibit 10.41a to our 8-K filed June 2, 2011.
10.42	†	2008 Executive Incentive Compensation Plan, approved by stockholders on May 22, 2008, incorporated herein by reference to our May 22, 2008 Notice of Annual Meeting of Stockholders filed April 3, 2008.
10.43		Amended and Restated Credit Agreement dated September 29, 2011, incorporated herein by reference from Exhibit 10.43 to our Form 8-K filed October 4, 2011.
10.44		Amendment No 1. To Amended and Restated Credit Agreement dated January 11, 2012, incorporated herein by reference from Exhibit 10.44 to our Form 8-K filed January 13, 2012.
10.50	†	Retirement Agreement dated October 14, 2011, incorporated herein by reference from Exhibit 10.50 to our Form 8-K filed October 20, 2011.
10.51	†	Consulting Agreement dated October 14, 2011, incorporated herein by reference from Exhibit 10.51 to our Form 8-K filed October 20, 2011.
10.52	†	Director Agreement dated October 14, 2011, incorporated herein by reference from Exhibit 10.52 to our Form 8-K filed October 20, 2011.
Other
12.1	*	Computation of Ratio of Earnings to Fixed Charges
21.1	*	List of our Subsidiaries

104

23.1	*	Consent of Ernst & Young LLP.
24.1		Powers of attorney (see signature page on page 81 of this Report).
95	*	Mine Safety Disclosures
Executive Officer Certifications
31.1	*	Certification of Chief Executive Officer required by Item 307 of Regulation S-K as promulgated by the Securities and Exchange Commission and pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
31.2	*	Certification of Chief Financial Officer required by Item 307 of Regulation S-K as promulgated by the Securities and Exchange Commission and pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
32.1	*	Certification of Chief Executive Officer Pursuant to 18 U.S.C Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
32.2	*	Certification of Chief Financial Officer Pursuant to 18 U.S.C Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
XBRL Documents
101.INS	*	XBRL Instance Document
101.SCH	*	XBRL Taxonomy Extension Schema Document
101.CAL	*	XBRL Taxonomy Extension Calculation Document
101.DEF	*	XBRL Taxonomy Extension Definition Document
101.LAB	*	XBRL Taxonomy Extension Label Document
101.PRE	*	XBRL Taxonomy Presentation Document

*

Filed concurrently herewith

†

Indicates a management contract or compensatory plan or arrangement.

105

SIGNATURES

        Pursuant to the requirements of Section 13 or 15(d) of Securities Exchange Act of 1934, Steel Dynamics, Inc. has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

February 27, 2012

STEEL DYNAMICS, INC.
By:	/s/ MARK D. MILLETT Mark D. Millett Chief Executive Officer

POWER OF ATTORNEY

        Each person whose signature appears below constitutes and appoints Mark D. Millett and Theresa E. Wagler, either of whom may act without the joinder of the other, as his true and lawful attorneys-in-fact and agents with full power of substitution and resubstitution, for him, and in his name, place and stead, in any and all capacities to sign any and all amendments, and supplements to this 2011 Annual Report on Form 10-K, filed pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934, as amended, and to file the same, with all exhibits thereto, and all other documents in connection therewith, with the Securities and Exchange Commission, granting unto said attorneys-in-fact and agents full power and authority to do and performs each and every act and thing requisite and necessary to be done, as full to all intents and purposes as he might or could do in person, hereby ratifying and confirming all that said attorneys-in-fact and agents or their substitute or substitutes may lawfully do or cause to be done by virtue thereof. Pursuant to the requirements of the Securities Exchange Act of 1934, this 2011 Annual Report on Form 10-K has been signed below by the following persons on behalf of Steel Dynamics, Inc. and in the capacities and on the dates indicated.

Signatures	Title	Date
/s/ MARK D. MILLETT Mark D. Millett	Chief Executive Officer and Director (Chief Executive Officer)	February 27, 2012
/s/ THERESA E. WAGLER Theresa E. Wagler	Executive Vice President and Chief Financial Officer (Chief Financial Officer)	February 27, 2012
/s/ RICHARD P. TEETS, JR. Richard P. Teets, Jr.	Executive Vice President and Director	February 27, 2012
/s/ JOHN C. BATES John C. Bates	Director	February 27, 2012

106

Signatures	Title	Date
/s/ KEITH E. BUSSE Keith E. Busse	Director	February 27, 2012
/s/ DR. FRANK BYRNE Dr. Frank Byrne	Director	February 27, 2012
/s/ PAUL EDGERLEY Paul Edgerley	Director	February 27, 2012
/s/ RICHARD J. FREELAND Richard J. Freeland	Director	February 27, 2012
/s/ DR. JÜRGEN KOLB Dr. Jürgen Kolb	Director	February 27, 2012
/s/ JAMES C. MARCUCCILLI James C. Marcuccilli	Director	February 27, 2012
/s/ GABRIEL L. SHAHEEN Gabriel L. Shaheen	Director	February 27, 2012

107

EX-12.1

QuickLinks -- Click here to rapidly navigate through this document

EXHIBIT 12.1

STEEL DYNAMICS, INC.
COMPUTATION OF RATIO OF EARNINGS TO FIXED CHARGES
(DOLLARS IN THOUSANDS)

	2007			2008			2009			2010			2011
Interest expense, including amortization of debt issuance costs	$	60,526		$	144,574		$	141,360		$	170,229		$	176,977
Capitalized interest		13,717			17,822			20,919			6,968			1,730
Fixed charges (a)		74,243			162,396			162,279			177,197			178,707
Income (loss) before taxes and before adjustment for noncontrolling interests		629,829			734,941			(18,237	)		213,459			424,319
Amortization of capitalized interest		5,069			4,670			4,259			5,885			6,124
Less capitalized interest		(13,717	)		(17,822	)		(20,919	)		(6,968	)		(1,730	)
Adjusted earnings (b)		695,424			884,185			127,382			389,573			607,420
Ratio (b) / (a)		9.37x			5.44x			.78x			2.20x			3.40x

        For purposes of calculating our ratio of earnings to fixed charges, earnings consist of earnings from continuing operations before income taxes, extraordinary items and before adjustment for noncontrolling interests, adjusted for the portion of fixed charges deducted from the earnings, plus amortization of capitalized interest. Fixed charges consist of interest on all indebtedness, including capitalized interest, and amortization of debt issuances costs.

QuickLinks

EXHIBIT 12.1

STEEL DYNAMICS, INC. COMPUTATION OF RATIO OF EARNINGS TO FIXED CHARGES (DOLLARS IN THOUSANDS)

EX-21.1

QuickLinks -- Click here to rapidly navigate through this document

EXHIBIT 21.1

Name	Percent of Capital Stock/Equity Units Owned by Steel Dynamics, Inc.			Percent of Voting Stock/Voting Units Owned by Steel Dynamics, Inc.
Dynamic Aviation, LLC (Indiana)		100	%		100	%
New Millennium Building Systems, LLC (Indiana)		100	%		100	%
OmniSource Corporation (Indiana)		100	%		100	%
Paragon Steel Enterprises, LLC (Indiana)		50	%		50	%
Roanoke Electric Steel Corporation (Indiana)		100	%		100	%
Steel Dynamics Sales North America, Inc. (Indiana)		100	%		100	%
STLD Holdings, Inc. (Indiana)		100	%		100	%
The Techs Industries, Inc. (Pennsylvania)		100	%		100	%

QuickLinks

EXHIBIT 21.1

EX-23.1

QuickLinks -- Click here to rapidly navigate through this document

EXHIBIT 23.1

CONSENT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

        We consent to the incorporation by reference in the Registration Statements of Steel Dynamics, Inc. (Forms S-8 Nos. 333-19541, 333-27549, 333-55888, 333-133493, and 333-147271; Forms S-3 Nos. 333-82210, 333-90594, and 333-103672 and Forms S-4, Nos. 333-99855, 333-115252, 333-131100, and 333-147650) of our reports dated February 27, 2012, with respect to the consolidated financial statements of Steel Dynamics, Inc., and the effectiveness of internal control over financial reporting of Steel Dynamics, Inc., included in this Annual Report (Form 10-K) for the year ended December 31, 2011.

/s/ Ernst & Young LLP
Indianapolis, Indiana
February 27, 2012

QuickLinks

EXHIBIT 23.1

CONSENT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

EX-31.1

QuickLinks -- Click here to rapidly navigate through this document

EXHIBIT 31.1

CERTIFICATION

I, Mark D. Millett, certify that:

1.

I have reviewed this annual report on Form 10-K of Steel Dynamics, Inc.;

2.

Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

3.

Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

4.

The registrant's other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

(a)

Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

(b)

Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

(c)

Evaluated the effectiveness of the registrant's disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

(d)

Disclosed in this report any change in the registrant's internal control over financial reporting that occurred during the registrant's most recent fiscal quarter (the registrant's fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant's internal control over financial reporting; and

5.

The registrant's other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant's auditors and the audit committee of the registrant's board of directors (or persons performing the equivalent functions):

(a)

All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant's ability to record, process, summarize and report financial information; and

(b)

Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant's internal control over financial reporting.

Date: February 27, 2012

/s/ MARK D. MILLETT
Mark D. Millett
Chief Executive Officer

QuickLinks

EXHIBIT 31.1

CERTIFICATION

EX-31.2

QuickLinks -- Click here to rapidly navigate through this document

EXHIBIT 31.2

CERTIFICATION

I, Theresa E. Wagler, certify that:

1.

I have reviewed this annual report on Form 10-K of Steel Dynamics, Inc.;

2.

Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

3.

Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

4.

The registrant's other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

(a)

Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

(b)

Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

(c)

Evaluated the effectiveness of the registrant's disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

(d)

Disclosed in this report any change in the registrant's internal control over financial reporting that occurred during the registrant's most recent fiscal quarter (the registrant's fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant's internal control over financial reporting; and

5.

The registrant's other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant's auditors and the audit committee of the registrant's board of directors (or persons performing the equivalent functions):

(a)

All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant's ability to record, process, summarize and report financial information; and

(b)

Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant's internal control over financial reporting.

Date: February 27, 2012

/s/ THERESA E. WAGLER
Theresa E. Wagler
Chief Financial Officer

QuickLinks

EXHIBIT 31.2

CERTIFICATION

EX-32.1

QuickLinks -- Click here to rapidly navigate through this document

EXHIBIT 32.1

Chief Executive Officer Certification
Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to
Section 906 of the Sarbanes-Oxley Act of 2002

        In connection with the Annual Report of Steel Dynamics, Inc. (the "Company") on Form 10-K for the year ended December 31, 2011, as filed with the Securities and Exchange Commission on the date hereof (the "Report"), the undersigned, Mark D. Millett, Chief Executive Officer of the Company, certifies, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that:

1.

The Report fully complies with the requirements of section 13(a) or 15(d) of the Securities Exchange Act of 1934; and



2.

The information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.

/s/ MARK D. MILLETT
Mark D. Millett
Chief Executive Officer
February 27, 2012

        A signed original of this written statement required by Section 906 has been provided to Steel Dynamics, Inc. and will be retained by Steel Dynamics, Inc. and furnished to the Securities and Exchange Commission or its staff upon request.

QuickLinks

EXHIBIT 32.1

Chief Executive Officer Certification Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

EX-32.2

QuickLinks -- Click here to rapidly navigate through this document

EXHIBIT 32.2

Chief Financial Officer Certification
Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to
Section 906 of the Sarbanes-Oxley Act of 2002

        In connection with the Annual Report of Steel Dynamics, Inc. (the "Company") on Form 10-K for the year ended December 31, 2011, as filed with the Securities and Exchange Commission on the date hereof (the "Report"), the undersigned, Theresa E. Wagler, Vice President and Chief Financial Officer of the Company, certifies, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that:

1.

The Report fully complies with the requirements of section 13(a) or 15(d) of the Securities Exchange Act of 1934; and



2.

The information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.

/s/ THERESA E. WAGLER
Theresa E. Wagler
Chief Financial Officer
February 27, 2012

        A signed original of this written statement required by Section 906 has been provided to Steel Dynamics, Inc. and will be retained by Steel Dynamics, Inc. and furnished to the Securities and Exchange Commission or its staff upon request.

QuickLinks

EXHIBIT 32.2

Chief Financial Officer Certification Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

EX-95

QuickLinks -- Click here to rapidly navigate through this document

EXHIBIT 95

Mine Safety Disclosures

        This exhibit contains information concerning mine safety matters required by Section 1503(a) of the Dodd-Frank Wall Street Reform and Consumer Protection Act about certain citations, orders and notices issued under the Federal Mine Safety and Health Act of 1977 (Mine Act) by the federal Mine Safety and Health Administration (MSHA) for our operations for the year ended December 31, 2011.

			YEAR ENDED DECEMBER 31, 2011
Mine or Operating Name	MSHA Indentification Number		Section 104(a) S&S Citations (#)		Section 104(b) Orders (#)		Section 104(d) Citations and Orders (#)		Section 110(b)(2) Citations and Orders (#)		Section 107(a) Orders (#)		Total Dollar Value of MSHA Assessments Proposed ($)		Legal Actions Initiated During Period (#)		Legal Actions Resolved During Period (#)		Legal Actions Pending as of Last Day of Period (#)
Mesabi Nugget Delaware, LLC		21-03689		30		—		—		—		—	$	15,446		9		15		8

        Although Mesabi Nugget Delaware, LLC (Mesabi Nugget), an affiliate of Steel Dynamics, Inc., is not a mining operation, the MSHA claims jurisdiction over Mesabi Nugget's operations regarding the production of iron nuggets via a production process that utilizes iron concentrate and coal as input raw materials. Therefore, this disclosure relating to Mesabi Nugget is being submitted by Steel Dynamics, Inc.

        The MSHA citations and orders set forth in the table above are those that were issued by MSHA and received by Mesabi Nugget during the year ended December 31, 2011. In addition, the table above sets forth the total dollar amount of assessments proposed by MSHA during the year ended December 31, 2011. The dollar amount of MSHA assessments proposed does not include assessments on those citations or orders that were received by Mesabi Nugget after December 31, 2011.

        The information in the table above does not reflect any subsequent changes in the level of severity of a citation or order, or changes in the value of an assessment that occurred during the time period presented in the table above (or that may occur after the time period covered in the table above) as a result of proceedings conducted in accordance with MSHA rules. For purposes of legal actions disclosures in the table above, any citation contested in any form or manner with MSHA is considered a legal action for reporting purposes.

        During the period covered by this report, no written notices were received from MSHA of a pattern, or the potential to have a pattern, of violations of mandatory health or safety standards that are of such a nature as could have significantly and substantially contributed to the cause and effect of mine health or safety hazards under Section 104(e) of the Mine Act, and there were no mining related fatalities.

QuickLinks

EXHIBIT 95

Mine Safety Disclosures

XML

Description of the Business and Summary of Significant Accounting Policies (Details 5) (Stock options, USD $) In Millions, unless otherwise specified	12 Months Ended
	Dec. 31, 2011	Dec. 31, 2010	Dec. 31, 2009
Stock options
Equity Based Compensation
Compensation expense for stock options	$ 14.8	$ 12.5	$ 13.2

XML

Retirement Plans (Details) (USD $) In Millions, unless otherwise specified	12 Months Ended
	Dec. 31, 2011	Dec. 31, 2010	Dec. 31, 2009
Retirement Plans
Total expenses recognized under 401 (k) Plan	$ 37.2	$ 22.9	$ 5.3
Percentage of employer's profit sharing contribution	2.00%
Employer's contribution to profit sharing plans for eligible employees	$ 35.1	$ 21.1	$ 2.2
Represents the employer's contribution percentage to the profit sharing plans.	50.00%	50.00%	50.00%
Percentage of profit sharing contribution paid to Plans' participants	50.00%	50.00%	50.00%

XML

Equity-based Incentive Plans (Details 2) (Stock options, USD $)	12 Months Ended
	Dec. 31, 2011	Dec. 31, 2010	Dec. 31, 2009
Stock options
Options
Balance at the beginning of the period (in shares)	7,406,393	6,489,371	7,986,681
Exercised (in shares)	(1,047,297)	(1,414,153)	(2,807,898)
Forfeited (in shares)	(499,718)	(214,757)	(326,519)
Balance at the end of the period (in shares)	8,602,282	7,406,393	6,489,371
Additional disclosures
Balance at the beginning of the period (in dollars per share)	$ 14.91	$ 13.69	$ 10.86
Granted (in dollars per share)	$ 14.34	$ 14.73	$ 15.04
Exercised (in dollars per share)	$ 11.37	$ 8.11	$ 5.81
Forfeited (in dollars per share)	$ 16.61	$ 20.35	$ 15.83
Balance at the end of the period (in dollars per share)	$ 15.06	$ 14.91	$ 13.69
Balance at the beginning of the period (in dollars per share)	$ 5.14	$ 5.09	$ 3.40
Granted (in dollars per share)	$ 5.36	$ 5.81	$ 5.14
Exercised (in dollars per share)	$ 4.28	$ 2.89	$ 2.57
Forfeited (in dollars per share)	$ 6.15	$ 6.33	$ 5.92
Balance at the end of the period (in dollars per share)	$ 5.25	$ 5.14	$ 5.09

XML

Leases (Details) (USD $)	12 Months Ended
	Dec. 31, 2011	Dec. 31, 2010	Dec. 31, 2009
Leases
Payment for operating leases	$ 16,800,000	$ 15,400,000	$ 15,300,000
Future minimum payments
2012	11,874,000
2013	9,000,000
2014	6,507,000
2015	4,609,000
2016	3,870,000
Thereafter	5,506,000
Total	$ 41,366,000

XML

Shareholders' Equity (Details) (USD $)	1 Months Ended	12 Months Ended			1 Months Ended
	Jun. 30, 2009	Dec. 31, 2011	Dec. 31, 2010	Dec. 31, 2009	Jun. 30, 2009 5.125% convertible senior notes, due 2014	Jun. 29, 2009 5.125% convertible senior notes, due 2014	Jun. 29, 2009 Term A loan
Common Stock Issuance
Public offering (in shares)	31,050,000
Public offering price per share (in dollars per share)	$ 13.50
Proceeds from issuance of common stock and convertible senior notes					$ 678,800,000
Stated interest rate on convertible senior notes						5.125%
Outstanding Term A loan							552,000,000
Cash dividends
Cash dividend declared		87,452,000	65,087,000	66,690,000
Cash dividend declared per share (in dollars per share)		$ 0.400	$ 0.300	$ 0.325
Cash dividend paid		$ 81,882,000	$ 64,969,000	$ 68,672,000
Treasury Stock
Remaining authorization to repurchase treasury stock (in shares)		3,600,000

XML

Condensed Consolidating Information (Tables)

12 Months Ended

Dec. 31, 2011

Condensed Consolidating Information

Schedule of Condensed Consolidating Balance Sheets

As of December 31, 2011	Parent			Guarantors		Combined Non-Guarantors			Consolidating Adjustments			Total Consolidated
Cash and equivalents	$	301,073		$	58,699	$	30,989		$	—		$	390,761
Investments in short-term commercial paper		84,830			—		—			—			84,830
Accounts receivable, net		319,995			726,192		8,971			(332,367	)		722,791
Inventories		584,079			533,022		85,046			(2,563	)		1,199,584
Other current assets		83,116			4,119		2,304			(32,247	)		57,292
Total current assets		1,373,093			1,322,032		127,310			(367,177	)		2,455,258
Property, plant and equiment, net		1,059,011			660,048		477,514			(2,828	)		2,193,745
Intangible assets, net		—			450,893		—			—			450,893
Goodwill		—			745,066		—			—			745,066
Other assets, including investments in subs		2,791,718			33,507		9,853			(2,700,814	)		134,264
Total assets	$	5,223,822		$	3,211,546	$	614,677		$	(3,070,819	)	$	5,979,226
Accounts payable	$	155,220		$	273,049	$	23,195		$	(30,640	)	$	420,824
Accrued expenses		157,868			98,498		10,012			(30,863	)		235,515
Current maturities of long-term debt		439,199			300		53,551			(48,972	)		444,078
Total current liabilities		752,287			371,847		86,758			(110,475	)		1,100,417
Long-term debt		1,905,199			—		169,797			(138,974	)		1,936,022
Other liabilities		250,395			2,132,778		51,625			(1,862,605	)		572,193
Redeemable noncontrolling interest		—			—		70,694			—			70,694
Common stock		636			33,896		18,121			(52,017	)		636
Treasury stock		(722,653	)		—		—			—			(722,653	)
Additional paid-in-capital		1,026,157			117,737		347,151			(464,888	)		1,026,157
Retained earnings (deficit)		2,011,801			555,288		(113,428	)		(441,860	)		2,011,801
Total Steel Dynamics, Inc. equity		2,315,941			706,921		251,844			(958,765	)		2,315,941
Noncontrolling interests		—			—		(16,041	)		—			(16,041	)
Total equity		2,315,941			706,921		235,803			(958,765	)		2,299,900
Total liabilities and equity	$	5,223,822		$	3,211,546	$	614,677		$	(3,070,819	)	$	5,979,226

As of December 31, 2010	Parent			Guarantors		Combined Non-Guarantors			Consolidating Adjustments			Total Consolidated
Cash and equivalents	$	173,563		$	10,628	$	2,322		$	—		$	186,513
Accounts receivable, net		283,883			614,412		7,282			(283,388	)		622,189
Inventories		548,726			487,298		84,183			(6,144	)		1,114,063
Other current assets		96,040			9,757		3,444			(32,003	)		77,238
Total current assets		1,102,212			1,122,095		97,231			(321,535	)		2,000,003
Property, plant and equiment, net		1,110,350			684,118		421,897			(3,032	)		2,213,333
Intangible assets, net		—			489,240		—			—			489,240
Goodwill		—			751,675		—			—			751,675
Other assets, including investments in subs(1)		2,788,097			36,617		7,601			(2,696,632	)		135,683
Total assets	$	5,000,659		$	3,083,745	$	526,729		$	(3,021,199	)	$	5,589,934
Accounts payable	$	127,246		$	227,823	$	26,015		$	(32,483	)	$	348,601
Accrued expenses		123,498			102,114		8,497			(30,317	)		203,792
Current maturities of long-term debt		7,554			325		34,604			(33,559	)		8,924
Total current liabilities		258,298			330,262		69,116			(96,359	)		561,317
Long-term debt		2,344,399			—		168,278			(134,780	)		2,377,897
Other liabilities(1)		305,092			2,158,725		27,072			(1,971,298	)		519,591
Redeemable noncontrolling interest		—			—		54,294			—			54,294
Common stock		633			33,901		16,121			(50,022	)		633
Treasury stock		(727,624	)		—		—			—			(727,624	)
Additional paid-in-capital		998,728			117,737		256,905			(374,642	)		998,728
Retained earnings (deficit)		1,821,133			443,120		(49,022	)		(394,098	)		1,821,133
Total Steel Dynamics, Inc. equity		2,092,870			594,758		224,004			(818,762	)		2,092,870
Noncontrolling interests		—			—		(16,035	)		—			(16,035	)
Total equity		2,092,870			594,758		207,969			(818,762	)		2,076,835
Total liabilities and equity	$	5,000,659		$	3,083,745	$	526,729		$	(3,021,199	)	$	5,589,934

(1)

Certain deferred tax asset and liability accounts have been reclassified at December 31, 2010, to conform to the December 31, 2011 presentation. These reclassifications had no impact to previously reported equity or total consolidated amounts.

Schedule of Condensed Consolidating Statement of Operations

For the Year Ended, December 31, 2011	Parent			Guarantors			Combined Non-Guarantors			Consolidating Adjustments			Total Consolidated
Net sales	$	3,701,928		$	9,062,305		$	190,739		$	(4,957,472	)	$	7,997,500
Costs of goods sold		3,099,941			8,604,620			251,528			(4,890,107	)		7,065,982
Gross profit (loss)		601,987			457,685			(60,789	)		(67,365	)		931,518
Selling, general and administrative		135,509			217,717			9,184			(15,712	)		346,698
Operating income (loss)		466,478			239,968			(69,973	)		(51,653	)		584,820
Interest expense, net of capitalized interest		104,008			71,487			8,784			(7,302	)		176,977
Other (income) expense, net		(12,663	)		(8,012	)		(3,209	)		7,408			(16,476	)
Income (loss) before income taxes and equity in net income of subsidiaries		375,133			176,493			(75,548	)		(51,759	)		424,319
Income taxes (benefit)		111,532			66,734			(151	)		(19,488	)		158,627
		263,601			109,759			(75,397	)		(32,271	)		265,692
Equity in net income of subsidiaries		14,519			—			—			(14,519	)		—
Net loss attributable to noncontrolling interests		—			—			12,428			—			12,428
Net income (loss) attributable to Steel Dynamics, Inc.	$	278,120		$	109,759		$	(62,969	)	$	(46,790	)	$	278,120

For the Year Ended, December 31, 2010	Parent			Guarantors			Combined Non-Guarantors			Consolidating Adjustments			Total Consolidated
Net sales	$	2,866,541		$	7,067,399		$	118,141		$	(3,751,194	)	$	6,300,887
Costs of goods sold		2,467,780			6,701,621			164,400			(3,708,580	)		5,625,221
Gross profit (loss)		398,761			365,778			(46,259	)		(42,614	)		675,666
Selling, general and administrative		98,410			215,723			8,724			(11,944	)		310,913
Operating income (loss)		300,351			150,055			(54,983	)		(30,670	)		364,753
Interest expense, net of capitalized interest		99,639			67,659			13,168			(10,237	)		170,229
Other (income) expense, net		(14,629	)		(15,123	)		(296	)		11,113			(18,935	)
Income (loss) before income taxes and equity in net income of subsidiaries		215,341			97,519			(67,855	)		(31,546	)		213,459
Income taxes (benefit)		84,718			36,325			(26,477	)		(10,706	)		83,860
		130,623			61,194			(41,378	)		(20,840	)		129,599
Equity in net income of subsidiaries		10,086			—			—			(10,086	)		—
Net loss attributable to noncontrolling interests		—			—			11,110			—			11,110
Net income (loss) attributable to Steel Dynamics, Inc.	$	140,709		$	61,194		$	(30,268	)	$	(30,926	)	$	140,709

For the Year Ended, December 31, 2009	Parent			Guarantors			Combined Non-Guarantors			Consolidating Adjustments			Total Consolidated
Net sales	$	1,790,451		$	4,334,533		$	54,053		$	(2,220,231	)	$	3,958,806
Costs of goods sold		1,628,271			4,055,388			52,996			(2,176,925	)		3,559,730
Gross profit (loss)		162,180			279,145			1,057			(43,306	)		399,076
Selling, general and administrative		68,633			208,847			15,057			(12,992	)		279,545
Operating income (loss)		93,547			70,298			(14,000	)		(30,314	)		119,531
Interest expense, net of capitalized interest		83,297			58,049			735			(721	)		141,360
Other (income) expense, net		49,255			(55,700	)		9			2,844			(3,592	)
Income (loss) before income taxes and equity in net income of subsidiaries		(39,005	)		67,949			(14,744	)		(32,437	)		(18,237	)
Income taxes (benefit)		(15,438	)		26,894			(5,835	)		(12,839	)		(7,218	)
		(23,567	)		41,055			(8,909	)		(19,598	)		(11,019	)
Equity in net income of subsidiaries		15,383			—			—			(15,383	)		—
Net loss attributable to noncontrolling interests		—			—			2,835			—			2,835
Net income (loss) attributable to Steel Dynamics, Inc.	$	(8,184	)	$	41,055		$	(6,074	)	$	(34,981	)	$	(8,184	)

Schedule of Condensed Consolidating Statements of Cash Flows

For the Year Ended, December 31, 2011	Parent			Guarantors			Combined Non-Guarantors			Consolidating Adjustments			Total Consolidated
Net cash provided by (used in) operating activities	$	380,171		$	173,574		$	(68,110	)	$	720		$	486,355
Net cash provided by (used in) investing activities		(230,314	)		(50,576	)		(65,144	)		110,197			(235,837	)
Financing activities
Issuance of long term debt		—			10,103			101,686			(101,686	)		10,103
Repayments of long term debt		(6,505	)		(1,075	)		(82,241	)		82,081			(7,740	)
Other		(15,842	)		(83,955	)		142,476			(91,312	)		(48,633	)
Net cash provided by (used in) financing activities		(22,347	)		(74,927	)		161,921			(110,917	)		(46,270	)
Increase in cash and equivalents		127,510			48,071			28,667			—			204,248
Cash and equivalents at beginning of period		173,563			10,628			2,322			—			186,513
Cash and equivalents at end of period	$	301,073		$	58,699		$	30,989		$	—		$	390,761

For the Year Ended, December 31, 2010	Parent			Guarantors			Combined Non-Guarantors			Consolidating Adjustments			Total Consolidated
Net cash provided by (used in) operating activities	$	262,155		$	17,011		$	(109,221	)	$	(638	)	$	169,307
Net cash provided by (used in) investing activities		(38,811	)		(51,414	)		(59,491	)		638			(149,078	)
Financing activities
Issuance of long term debt		554,001			—			110,743			(108,191	)		556,553
Repayments of long term debt		(361,383	)		14,979			(559	)		—			(346,963	)
Other		(242,829	)		23,690			58,634			108,191			(52,314	)
Net cash provided by (used in) financing activities		(50,211	)		38,669			168,818			—			157,276
Increase in cash and equivalents		173,133			4,266			106			—			177,505
Cash and equivalents at beginning of period		430			6,362			2,216			—			9,008
Cash and equivalents at end of period	$	173,563		$	10,628		$	2,322		$	—		$	186,513

For the Year Ended, December 31, 2009	Parent			Guarantors			Combined Non-Guarantors			Consolidating Adjustments			Total Consolidated
Net cash provided by (used in) operating activities	$	261,605		$	176,382		$	(38,811	)	$	46,380		$	445,556
Net cash provided by (used in) investing activities		(77,069	)		(71,998	)		(227,459	)		2,581			(373,945	)
Financing activities
Issuance of long term debt		1,219,500			—			227,831			(178,896	)		1,268,435
Repayments of long term debt		(1,699,972	)		9,486			(71	)		—			(1,690,557	)
Other		294,977			(119,022	)		37,396			129,935			343,286
Net cash provided by (used in) financing activities		(185,495	)		(109,536	)		265,156			(48,961	)		(78,836	)
Decrease in cash and equivalents		(959	)		(5,152	)		(1,114	)		—			(7,225	)
Cash and equivalents at beginning of period		1,389			11,514			3,330			—			16,233
Cash and equivalents at end of period	$	430		$	6,362		$	2,216		$	—		$	9,008

XML

Segment Information (Details 2) (USD $)	3 Months Ended								12 Months Ended
	Dec. 31, 2011	Sep. 30, 2011	Jun. 30, 2011	Mar. 31, 2011	Dec. 31, 2010	Sep. 30, 2010	Jun. 30, 2010	Mar. 31, 2010	Dec. 31, 2011	Dec. 31, 2010	Dec. 31, 2009	Dec. 31, 2008
Operating income (loss)
Profit sharing									$ (43,149,000)	$ (25,476,000)	$ (2,980,000)
Operating income	82,490,000	108,785,000	188,219,000	205,326,000	46,821,000	69,000,000	116,635,000	132,297,000	584,820,000	364,753,000	119,531,000
Assets
Cash and equivalents	390,761,000				186,513,000				390,761,000	186,513,000	9,008,000	16,233,000
Investment in short-term commercial paper	84,830,000								84,830,000
Income taxes receivable	16,722,000				37,311,000				16,722,000	37,311,000
Deferred income taxes	25,341,000				20,684,000				25,341,000	20,684,000
Property, plant and equipment, net	2,193,745,000				2,213,333,000				2,193,745,000	2,213,333,000
Other	134,264,000				135,683,000				134,264,000	135,683,000
Total assets	5,979,226,000				5,589,934,000				5,979,226,000	5,589,934,000	5,129,872,000
Liabilities
Accounts payable	420,824,000				348,601,000				420,824,000	348,601,000
Income taxes payable	10,880,000				5,227,000				10,880,000	5,227,000
Accrued interest	36,265,000				35,416,000				36,265,000	35,416,000
Debt	2,380,100,000				2,386,821,000				2,380,100,000	2,386,821,000
Deferred income taxes	489,915,000				457,432,000				489,915,000	457,432,000
Liabilities	3,608,632,000				3,458,804,000				3,608,632,000	3,458,804,000	3,126,607,000
Other
Operating income (loss)
Corporate SG and A									(46,700,000)	(31,600,000)	(26,500,000)
Company-wide stock option expense									(14,800,000)	(12,500,000)	(13,200,000)
Profit sharing									(35,100,000)	(21,100,000)	(2,200,000)
Other, net									1,500,000	(1,000,000)	(3,500,000)
Operating income									(95,141,000)	(66,189,000)	(45,356,000)
Assets
Cash and equivalents	314,900,000				175,300,000				314,900,000	175,300,000
Investment in short-term commercial paper	84,800,000								84,800,000
Income taxes receivable	16,700,000				37,300,000				16,700,000	37,300,000	137,000,000
Deferred income taxes	25,300,000				20,700,000				25,300,000	20,700,000	21,500,000
Property, plant and equipment, net	85,700,000				70,700,000				85,700,000	70,700,000	44,500,000
Debt issuance costs	23,900,000				23,300,000				23,900,000	23,300,000	24,000,000
Intra-company debt	152,800,000				134,800,000				152,800,000	134,800,000	174,900,000
Other	85,200,000				100,900,000				85,200,000	100,900,000	67,500,000
Total assets	789,322,000				562,961,000				789,322,000	562,961,000	469,389,000
Liabilities
Accounts payable	28,700,000				32,500,000				28,700,000	32,500,000	37,800,000
Income taxes payable	11,100,000				5,200,000				11,100,000	5,200,000	5,700,000
Accrued interest	33,700,000				33,700,000				33,700,000	33,700,000	27,300,000
Accrued profit sharing	35,800,000				21,500,000				35,800,000	21,500,000	2,300,000
Debt	2,341,900,000				2,341,000,000				2,341,900,000	2,341,000,000	2,158,200,000
Deferred income taxes	217,600,000				242,700,000				217,600,000	242,700,000	220,900,000
Other liabilities	91,100,000				70,200,000				91,100,000	70,200,000	62,200,000
Liabilities	$ 2,759,894,000				$ 2,746,798,000				$ 2,759,894,000	$ 2,746,798,000	$ 2,514,423,000

XML

Income Taxes (Tables)

12 Months Ended

Dec. 31, 2011

Income Taxes

Schedule of current and deferred federal and state income tax expense (benefit)

	2011		2010		2009
Current income tax expense (benefit)	$	128,209	$	39,554	$	(96,140	)
Deferred income tax expense		30,418		44,306		88,922
Total income tax expense (benefit)	$	158,627	$	83,860	$	(7,218	)

Schedule of reconciliation of statutory tax rates to actual effective tax rates

	2011			2010			2009
Statutory federal tax rate		35.0	%		35.0	%		35.0	%
State income taxes, net of federal benefit		3.5			3.2			1.9
Other permanent differences		(1.1	)		1.1			2.7
Effective tax rate		37.4	%		39.3	%		39.6	%

Schedule of components of deferred tax assets and liabilities

	2011			2010
Deferred tax assets
Capitalized start-up costs	$	29,182		$	29,728
Assets capitalized for tax, expensed for books		32,711			28,017
Accrued expenses		31,824			26,122
Total deferred tax assets		93,717			83,867
Deferred tax liabilities
Property, plant and equipment		(471,847	)		(448,557	)
Intangible assets		(79,778	)		(69,455	)
Other		(6,666	)		(2,603	)
Total deferred tax liabilities		(558,291	)		(520,615	)
Net deferred tax liability	$	(464,574	)	$	(436,748	)

Schedule of reconciliation of beginning and ending amount of unrecognized tax benefits

	2011			2010			2009
Balance at January 1	$	49,396		$	49,587		$	47,875
Increases related to current year tax positions		2,046			300			780
Increases related to prior year tax positions		13,785			1,361			5,099
Decreases related to prior year tax positions		(196	)		(496	)		(3,766	)
Lapses in statutes of limitations		—			(1,128	)		(401	)
Settlements with taxing authorities		(476	)		(228	)		—
Balance at December 31	$	64,555		$	49,396		$	49,587

XML

Derivative Financial Instruments (Details) (USD $) In Thousands, unless otherwise specified	12 Months Ended
	Dec. 31, 2011	Dec. 31, 2010	Dec. 31, 2009
Not designated
Fair values of derivative instruments, balance sheet
Gain (loss) on commodity futures contracts (in dollars)	$ 12,531	$ (5,907)	$ 7,347
Not designated | Commodity Futures
Fair values of derivative instruments, balance sheet
Commodity futures net liability (in dollars)	1,219	4,988
Designated
Fair values of derivative instruments, balance sheet
Unrealized gain (loss) on interest rate swap (in dollars)			2,294
Gain (loss) on interest rate swap (in dollars)			$ (1,350)
Aluminum | Long
Commodity futures contract commitments
Commodity futures contract (in MT/Lbs)	10,200
Aluminum | Short
Commodity futures contract commitments
Commodity futures contract (in MT/Lbs)	8,550
Copper | Long
Commodity futures contract commitments
Commodity futures contract (in MT/Lbs)	2,427
Copper | Short
Commodity futures contract commitments
Commodity futures contract (in MT/Lbs)	7,394
Nickel | Long
Commodity futures contract commitments
Commodity futures contract (in MT/Lbs)	36
Nickel | Short
Commodity futures contract commitments
Commodity futures contract (in MT/Lbs)	198
Silver | Short
Commodity futures contract commitments
Commodity futures contract (in MT/Lbs)	343

XML

Long-Term Debt (Details) (USD $)	12 Months Ended			1 Months Ended	12 Months Ended	1 Months Ended			12 Months Ended	36 Months Ended		1 Months Ended			12 Months Ended	1 Months Ended	12 Months Ended					12 Months Ended					12 Months Ended					12 Months Ended							12 Months Ended		12 Months Ended									1 Months Ended				12 Months Ended			12 Months Ended		12 Months Ended				12 Months Ended
	Dec. 31, 2011	Dec. 31, 2010	Dec. 31, 2009	Nov. 30, 1998 State and Local Government Municipal Bond Issues	Dec. 31, 2011 State and Local Government Municipal Bond Issues	Apr. 30, 2002 Electric Utility Development Loans	Dec. 31, 2011 Electric Utility Development Loans	Dec. 31, 2010 Electric Utility Development Loans	Dec. 31, 2011 Minnesota Economic Development State Loans	Dec. 31, 2010 Minnesota Economic Development State Loans	Dec. 31, 2011 Mesabi Nugget Kobe Iron Nugget, LLC (Kobe)	Jan. 31, 2012 7 3/8% senior notes, due 2012	Dec. 31, 2011 7 3/8% senior notes, due 2012	Dec. 31, 2010 7 3/8% senior notes, due 2012	Dec. 31, 2011 7 3/8% senior notes, due 2012 Maximum	Jun. 30, 2009 5.125% convertible senior notes, due 2014	Dec. 31, 2011 5.125% convertible senior notes, due 2014 year day	Dec. 31, 2010 5.125% convertible senior notes, due 2014	Dec. 31, 2009 5.125% convertible senior notes, due 2014	Dec. 31, 2011 6 3/4% senior notes, due 2015	Dec. 31, 2010 6 3/4% senior notes, due 2015	Dec. 31, 2011 6 3/4% senior notes, due 2015 Debt redemption on or after April 1, 2011	Dec. 31, 2011 6 3/4% senior notes, due 2015 Debt redemption on or after April 1, 2012	Dec. 31, 2011 6 3/4% senior notes, due 2015 Debt redemption on or after April 1, 2013	Dec. 31, 2011 7 3/4% senior notes, due 2016	Dec. 31, 2010 7 3/4% senior notes, due 2016	Dec. 31, 2011 7 3/4% senior notes, due 2016 Debt redemption after April 15, 2012	Dec. 31, 2011 7 3/4% senior notes, due 2016 Debt redemption on or after April 1, 2013	Dec. 31, 2011 7 3/4% senior notes, due 2016 Debt redemption on or after April 1, 2014	Dec. 31, 2011 7 5/8% senior notes, due 2020	Dec. 31, 2010 7 5/8% senior notes, due 2020	Dec. 31, 2011 7 5/8% senior notes, due 2020 Debt redemption prior to March 15, 2013 offering	Dec. 31, 2011 7 5/8% senior notes, due 2020 Debt redemption after March 15, 2015	Dec. 31, 2011 7 5/8% senior notes, due 2020 Debt redemption on or after March 15, 2016	Dec. 31, 2011 7 5/8% senior notes, due 2020 Debt redemption on or after March 15, 2017	Dec. 31, 2011 7 5/8% senior notes, due 2020 Debt redemption on or after March 15, 2018	Dec. 31, 2011 Other secured obligations	Dec. 31, 2010 Other secured obligations	Dec. 31, 2011 Senior secured revolving credit facility, due 2016 month	Sep. 29, 2011 Senior secured revolving credit facility, due 2016	Dec. 31, 2011 Senior secured revolving credit facility, due 2016 Scenario actual	Dec. 31, 2011 Senior secured revolving credit facility, due 2016 Minimum	Dec. 31, 2011 Senior secured revolving credit facility, due 2016 Minimum Scenario forecasted	Dec. 31, 2011 Senior secured revolving credit facility, due 2016 Minimum LIBOR	Dec. 31, 2011 Senior secured revolving credit facility, due 2016 Minimum Prime	Dec. 31, 2011 Senior secured revolving credit facility, due 2016 Maximum	Dec. 31, 2011 Senior secured revolving credit facility, due 2016 Maximum Scenario forecasted	Dec. 31, 2011 Senior secured revolving credit facility, due 2016 Maximum LIBOR	Dec. 31, 2011 Senior secured revolving credit facility, due 2016 Maximum Prime	Jan. 31, 2012 Term Loan maturing in 2016	Jan. 31, 2012 Term Loan maturing in 2016 Minimum	Jan. 31, 2012 Term Loan maturing in 2016 Maximum	Dec. 31, 2011 Stand-by letter of credit Electric Utility Development Loans	Dec. 31, 2011 Senior secured revolving credit facility after amendment Scenario forecasted	Dec. 31, 2011 Senior secured revolving credit facility after amendment Mesabi Nugget	Dec. 31, 2011 Term loan facilities Mesabi Nugget	Dec. 31, 2010 Mesabi Nugget Loan Participation	Dec. 31, 2011 Mesabi Nugget Loan Participation	Dec. 31, 2010 Mesabi Nugget Loan Participation Kobe Iron Nugget, LLC (Kobe)	Dec. 31, 2009 Mesabi Nugget Loan Participation Kobe Iron Nugget, LLC (Kobe) agreement	Dec. 31, 2011 Mesabi Nugget Loan Participation Mesabi Nugget	Dec. 31, 2010 Mesabi Nugget Loan Participation Mesabi Nugget	Dec. 31, 2010 Mesabi Nugget Loan Participation Mesabi Nugget Kobe Iron Nugget, LLC (Kobe)	Dec. 31, 2011 Mesabi Nugget Loan Participation Mesabi Nugget Kobe Iron Nugget, LLC (Kobe)
Long Term Debt
Total debt	$ 2,380,100,000	$ 2,386,821,000											$ 700,000,000	$ 700,000,000			$ 287,500,000	$ 287,500,000		$ 500,000,000	$ 500,000,000				$ 500,000,000	$ 500,000,000				$ 350,000,000	$ 350,000,000						$ 42,600,000	$ 49,321,000																										$ 4,500,000
Less current maturities	444,078,000	8,924,000																																																														901,000
Long-term debt	1,936,022,000	2,377,897,000
Stated interest rate (as a percent)					7.30%		8.10%		3.50%			7.375%	7.375%	7.375%		5.125%	5.125%	5.125%	5.125%	6.75%	6.75%				7.75%	7.75%				7.625%	7.625%
Debt issued																287,500,000
Maximum borrowing capacity of credit facility before renewal																																								924,000,000
Maximum borrowing capacity of credit facility																																							1,100,000,000	1,100,000,000															85,000,000	240,000,000
Additional amount by which facility size can be increased																																							125,000,000	125,000,000
Quarterly interest rate percentage																																																		2.00%	1.25%	3.75%
Unpaid principal balance	682,461,000																																																	158,000,000
Repayments of Debt	7,740,000	346,963,000	1,690,557,000		7,100,000							279,700,000
Maximum amount of debt that could be tendered															350,000,000
Expenses recorded in January 2012 related to tender premium, unamortized financing fees and tender expenses												13,900,000
Reference rate, description																																												LIBOR	Prime			LIBOR	Prime
Interest rate added to the base rate (as a percent)																																												1.00%				2.00%	1.00%
Unused commitment fee (as a percent)																																										0.25%				0.45%
Percent of eligible accounts receivable included in maximum availability of credit facility calculation																																							85.00%
Percent of eligible inventories included in maximum availability of credit facility calculation																																							65.00%
Availability on the senior secured revolver																																							1,100,000,000
Outstanding letters of credit and other obligations which reduce availability																																							16,500,000
Financial covenant, minimum liquidity																																									1,600,000,000		150,000,000
Financial covenant, outstanding																																										850,000,000
Numerator portion of consolidated interest coverage ratio																																									4.92		2.5
Denominator portion of consolidated interest coverage ratio																																									1		1
Numerator portion of debt leverage ratio																																									2.36						5.00
Denominator portion of debt leverage ratio																																									1.00						1.00
Numerator portion of threshold debt leverage ratio after which payment restrictions occur																																															3.50
Denominator portion of threshold debt leverage ratio after which payment restrictions occur																																															1.00
Anticipated covenant compliance period (in months)																																																						twelve months
Proceeds from issuance of common stock and convertible senior notes																678,800,000
Debt instrument maturity period (in years)																	5
Convertible debt, shares, basis for conversion																	56.9801
Convertible debt, principal amount, basis for conversion																	1,000
Convertible debt, shares issued																	16,381,779
Number of consecutive trading days during which the closing price of the entity's common stock must exceed the conversion price for at least 20 or more trading days in order for the notes to be redeemable																	20
Number of days within 30 consecutive trading days in which the closing price of the entity's common stock must exceed the conversion price for the notes to be redeemable (in days)																	30
Minimum sales price as percentage of conversion price considered for redemption of notes																	130.00%
Conversion price per share (in dollars per share)																	$ 17.55
Redemption price of debt instrument (as a percent)																	100.00%					103.375%	101.688%	100.00%			103.875%	101.938%	100.00%			107.625%	103.813%	102.542%	101.271%	100.00%
Proceeds from debt	10,103,000	556,553,000	1,268,435,000	10,000,000		9,800,000				26,500,000																																								275,000,000
Period for which adjusted EBITDA is considered for pricing of credit facility (in months)																																							12
Cash dividend paid	81,882,000	64,969,000	68,672,000
Minimum number of common stock equity offerings necessary for proceeds to be used for debt redemption																																1
Outstanding principal balance							6,900,000	7,300,000	26,500,000	26,500,000
Outstanding letters of credit																																							16,500,000														4,000,000
Long Term Debt prior to conversion																																																															35,000,000
Principal amount of debt converted																																																									130,000,000						30,500,000
Number of term agreements																																																												1
Proceeds from sale of participation interest																																																											$ 10,000,000	$ 25,000,000
Ownership percentage																																																													81.00%	81.00%
Ownership percentage											19.00%																																																				19.00%	19.00%
Debt, weighted average interest rate (as a percent)																																																										2.80%
Interest rate percent after February 2017									5.00%

XML

Description of the Business and Summary of Significant Accounting Policies (Details 3) (USD $)	12 Months Ended
	Dec. 31, 2011 year	Dec. 31, 2010	Dec. 31, 2009
Intangible Assets
Gross assets	$ 632,120,000	$ 632,120,000
Accumulated amortization	181,227,000	142,880,000
Net assets	450,893,000	489,240,000
Weighted Average Amortization Period (in years)	19
Amortization expense	38,300,000	44,300,000	52,400,000
Estimated amortization expense
2012	34,258,000
2013	30,476,000
2014	26,090,000
2015	23,390,000
2016	20,902,000
Thereafter	125,977,000
Total	261,093,000
Impairment of Long-Lived Tangible and Finite-Lived Intangible Assets
Impairment charges		12,805,000
Trademarks
Intangible Assets
Gross assets	189,800,000	189,800,000
Customer and scrap generator relationships
Intangible Assets
Gross assets	408,400,000	408,400,000
Useful life minimum (in months or years)	10
Useful life maximum (in years)	25
Weighted Average Amortization Period (in years)	20
Trademarks
Intangible Assets
Gross assets	19,700,000	19,700,000
Useful life minimum (in months or years)	4
Useful life maximum (in years)	12
Weighted Average Amortization Period (in years)	12
Other
Intangible Assets
Gross assets	$ 14,220,000	$ 14,220,000
Useful life minimum (in months or years)	3
Useful life maximum (in years)	6
Weighted Average Amortization Period (in years)	5

XML

Commitments and Contingencies (Details) (USD $)	12 Months Ended
	Dec. 31, 2011 month year
Company's commitments for agreements with take or pay or other similar commitment provisions
Outstanding construction-related commitments	$ 32,800,000
Number of other steel manufacturing companies also served with a class action antitrust complaint	8
Number of the complaints not brought on behalf of steel product purchasers	1
Commitments with suppliers "take or pay"
Commitment and contingencies
Commodity actual usage period (in months)	24
Commodity transportation requirements period (in years)	9
Company's commitments for agreements with take or pay or other similar commitment provisions
2012	122,705,000
2013	10,237,000
2014	1,737,000
2015	1,561,000
2016	1,561,000
Thereafter	5,197,000
Total	$ 142,998,000
Physical commodity requirements utilization period (in years)	3
Electricity purchase commitment
Company's commitments for agreements with take or pay or other similar commitment provisions
Annual "interruptible service" hours at Flat Roll Division	160

XML

Condensed Consolidating Information (Details 3) (USD $) In Thousands, unless otherwise specified	12 Months Ended
	Dec. 31, 2011	Dec. 31, 2010	Dec. 31, 2009
Condensed Consolidating Financial Statements
Net cash provided by (used in) operating activities	$ 486,355	$ 169,307	$ 445,556
Net cash provided by (used in) investing activities	(235,837)	(149,078)	(373,945)
Financing activities
Issuance of long term debt	10,103	556,553	1,268,435
Repayments of long term debt	(7,740)	(346,963)	(1,690,557)
Other	(48,633)	(52,314)	343,286
Net cash provided by (used in) financing activities	(46,270)	157,276	(78,836)
Increase (decrease) in cash and equivalents	204,248	177,505	(7,225)
Cash and equivalents at beginning of year	186,513	9,008	16,233
Cash and equivalents at end of year	390,761	186,513	9,008
Parent
Condensed Consolidating Financial Statements
Net cash provided by (used in) operating activities	380,171	262,155	261,605
Net cash provided by (used in) investing activities	(230,314)	(38,811)	(77,069)
Financing activities
Issuance of long term debt		554,001	1,219,500
Repayments of long term debt	(6,505)	(361,383)	(1,699,972)
Other	(15,842)	(242,829)	294,977
Net cash provided by (used in) financing activities	(22,347)	(50,211)	(185,495)
Increase (decrease) in cash and equivalents	127,510	173,133	(959)
Cash and equivalents at beginning of year	173,563	430	1,389
Cash and equivalents at end of year	301,073	173,563	430
Guarantors
Condensed Consolidating Financial Statements
Net cash provided by (used in) operating activities	173,574	17,011	176,382
Net cash provided by (used in) investing activities	(50,576)	(51,414)	(71,998)
Financing activities
Issuance of long term debt	10,103
Repayments of long term debt	(1,075)	14,979	9,486
Other	(83,955)	23,690	(119,022)
Net cash provided by (used in) financing activities	(74,927)	38,669	(109,536)
Increase (decrease) in cash and equivalents	48,071	4,266	(5,152)
Cash and equivalents at beginning of year	10,628	6,362	11,514
Cash and equivalents at end of year	58,699	10,628	6,362
Combined Non-Guarantors
Condensed Consolidating Financial Statements
Net cash provided by (used in) operating activities	(68,110)	(109,221)	(38,811)
Net cash provided by (used in) investing activities	(65,144)	(59,491)	(227,459)
Financing activities
Issuance of long term debt	101,686	110,743	227,831
Repayments of long term debt	(82,241)	(559)	(71)
Other	142,476	58,634	37,396
Net cash provided by (used in) financing activities	161,921	168,818	265,156
Increase (decrease) in cash and equivalents	28,667	106	(1,114)
Cash and equivalents at beginning of year	2,322	2,216	3,330
Cash and equivalents at end of year	30,989	2,322	2,216
Consolidating Adjustments
Condensed Consolidating Financial Statements
Net cash provided by (used in) operating activities	720	(638)	46,380
Net cash provided by (used in) investing activities	110,197	638	2,581
Financing activities
Issuance of long term debt	(101,686)	(108,191)	(178,896)
Repayments of long term debt	82,081
Other	(91,312)	108,191	129,935
Net cash provided by (used in) financing activities	$ (110,917)		$ (48,961)

XML

Equity-based Incentive Plans (Details) (USD $)	12 Months Ended
	Dec. 31, 2011	Dec. 31, 2010	Dec. 31, 2009
Stock options
Equity-based Incentive Plans
Weighted-average fair value of options granted (in dollars per share)	$ 5.36	$ 5.81	$ 5.14
2006 Equity Incentive Plan (2006 Plan)
Other Share-based Compensation Disclosures
Period during which no other equity-based incentives were issued (in years)	P3Y
2006 Equity Incentive Plan (2006 Plan) | Stock options
Equity-based Incentive Plans
Original number of shares authorized for issuance	16,000,000
Remaining number of shares available for issuance	1,000,000
Options granted	2,742,904	2,545,932	1,637,107
Options vesting percentage	100.00%
Vesting period of options (in months)	6 months
Option term (in years)	P5Y
Options exercise price as a percentage of fair value of common stock	100.00%
Aggregate intrinsic value of options exercised (in dollars)	$ 7,400,000	$ 11,600,000	$ 26,200,000
Aggregate intrinsic value of options exercisable (in dollars)	12,100,000
Aggregate intrinsic value of options that are currently outstanding and that are expected to be exercised (in dollars)	13,100,000
Unrecognized stock option compensation expense	5,700,000
Fair value of stock option awards estimated on the date of grant using the Black Scholes option valuation model
Volatility minimum (as a percent)	65.10%	66.40%	67.20%
Volatility maximum (as a percent)	66.30%	67.00%	67.40%
Risk-free interest rate minimum (as a percent)	0.40%	0.80%	2.10%
Risk-free interest rate maximum (as a percent)	1.40%	2.00%	2.20%
Expected life minimum (in years)	2.8	2.8	2.2
Expected life maximum (in years)	4.1	4.1	3.9
2006 Equity Incentive Plan (2006 Plan) | Stock options | Minimum
Fair value of stock option awards estimated on the date of grant using the Black Scholes option valuation model
Dividend yield (as a percent)	2.30%	2.00%	1.70%
2006 Equity Incentive Plan (2006 Plan) | Stock options | Maximum
Fair value of stock option awards estimated on the date of grant using the Black Scholes option valuation model
Dividend yield (as a percent)	2.50%	2.20%	2.00%
2006 Equity Incentive Plan (2006 Plan) | Restricted stock
Equity-based Incentive Plans
Stock issued	249,000	43,300	157,000
2006 Equity Incentive Plan (2006 Plan) | Deferred stock units
Equity-based Incentive Plans
Stock issued	42,000
2008 Executive Incentive Compensation Plan (Executive Plan) | Stock options
Equity-based Incentive Plans
Original number of shares authorized for issuance	2,500,000
Remaining number of shares available for issuance	1,900,000
Vesting period of options (in months)	3 years
Other Share-based Compensation Disclosures
Market value of award	4,000,000	208,000
2004 Employee Stock Purchase Plan
Other Share-based Compensation Disclosures
Maximum annual allowable payroll deduction per employee	10,400
Employer's matching contribution of employees' payroll deductions (as a percent)	10.00%
Total expenses for the plan	$ 328,000	$ 299,000	$ 304,000

XML

Long-Term Debt

12 Months Ended

Dec. 31, 2011

Long-Term Debt

Long-Term Debt

Note 2. Long-Term Debt

        The company's borrowings consisted of the following at December 31 (in thousands):

	2011		2010
73/8% senior notes, due 2012	$	700,000	$	700,000
5.125% convertible senior notes, due 2014		287,500		287,500
63/4% senior notes, due 2015		500,000		500,000
73/4% senior notes, due 2016		500,000		500,000
75/8% senior notes, due 2020		350,000		350,000
Other secured obligations		42,600		49,321
Total debt		2,380,100		2,386,821
Less current maturities		444,078		8,924
Long-term debt	$	1,936,022	$	2,377,897

Senior Secured Credit Facility, due 2016

        On September 29, 2011, the company amended, restated and expanded its existing senior secured credit facility (Facility) from the prior $924.0 million level to a renewed $1.1 billion revolver due September 2016 (Revolver). Subject to certain conditions, the company has the opportunity to increase the Revolver size by an additional $125.0 million. The Revolver is available to fund working capital, capital expenditures, and other general corporate purposes. The Facility is guaranteed by certain of the company's subsidiaries; and is secured by substantially all of the company's and its wholly-owned subsidiaries' receivables and inventories, and by pledges of all shares of the company's wholly-owned subsidiaries' capital stock. On January 11, 2012, the company expanded the Facility by adding a $275.0 million term loan that matures on September 30, 2016 (Term Loan). Quarterly principal payments under the Term Loan are required to be made in amounts ranging from 1.25% to 3.75% of the original principal amount, with the unpaid principal balance of approximately $158 million due on the maturity date. Interest, based on the Facility's pricing grid (2.0% at January 11, 2012) is payable quarterly. The Company used the net proceeds of the Term Loan, together with cash on hand, to fund the January 2012 purchase of $279.7 million of the company's 7³/8% Senior Notes due 2012.

        The Facility pricing grid is adjusted quarterly and is based on company's leverage of total debt to last-twelve-month's (LTM) adjusted EBITDA (earnings before interest, taxes, depreciation, amortization, and certain other non-cash transactions, as defined in the credit agreement). The minimum pricing is LIBOR plus 1.00% or Prime, and the maximum pricing is LIBOR plus 2.00% or Prime plus 1.00%. In addition the company is subject to an unused commitment fee of between 0.25% and 0.45% (based on leverage of total debt to LTM adjusted EBITDA) which is applied to the unused portion of the $1.1 billion revolver each quarter.

        The Facility contains financial covenants and other covenants that limit or restrict our ability to make capital expenditures; incur indebtedness; permit liens on property; enter into transactions with affiliates; make restricted payments or investments; enter into mergers, acquisitions or consolidations; conduct asset sales; pay dividends or distributions and enter into other specified transactions and activities. Our ability to borrow funds within the terms of the Revolver is dependent upon our continued compliance with the financial and other covenants. The Facility also contains a borrowing base requirement regarding the maximum availability of the Revolver. The company's Revolver must be the lesser of:

• I.

  $1.1 billion less other applicable commitments, such as letters of credit and other secured debt, as defined within the credit agreement, or;
  
  

  II.

  The sum of 85% of the company's eligible accounts receivable and 65% of the company's eligible inventories, less other applicable commitments, such as letters of credit and other secured debt, as defined within the credit agreement.

        At December 31, 2011, the company had $1.1 billion of availability on the Revolver, $16.5 million of outstanding letters of credit and other obligations which reduce availability, and there were no borrowings outstanding.

        The Facility's financial covenants are as follows:

• I.

  Minimum Liquidity—Liquidity is defined as unrestricted cash and Revolver availability, each as defined in the credit agreement. The company must maintain minimum liquidity of $150.0 million plus any outstanding amount of the $700.0 million senior notes due 2012, which requirement was $850 million at December 31, 2011. At December 31, 2011, the company's liquidity was almost $1.6 billion.
  
  

  II.

  Interest Coverage—Interest coverage is defined as the ratio of the company's consolidated LTM adjusted EBITDA to the company's consolidated LTM gross interest expense. The company must maintain an interest coverage ratio of not less than 2.50 to 1.00. At December 31, 2011, the company's interest coverage ratio was 4.92 to 1.00.
  
  

  III.

  Net Debt Leverage—Net debt leverage is defined as the ratio of the company's consolidated net debt, as defined within the credit agreement, to consolidated LTM adjusted EBITDA. The company must maintain a net debt leverage ratio of less than 5.00 to 1.00. In addition, if the total debt to consolidated LTM adjusted EBITDA ratio exceeds 3.50 to 1.00 at any time, then the ability of the company to make restricted payments as defined in the credit agreement (which includes cash dividends to stockholders and share purchases, among other things), could be limited. At December 31, 2011, the company's net debt leverage ratio was 2.36 to 1.00.

        The company was in compliance with its financial covenants at December 31, 2011 and anticipates remaining in compliance during the next twelve months.

7³/8% Senior Notes, due 2012

        The $700.0 million of 7³/8% senior notes mature in November 2012, and pay interest semi-annually on May 1 and November 1 of each year and are equal in right of payment with all existing and future senior unsecured indebtedness and senior in right of payment to all subordinated indebtedness. In January 2012, the company repaid $279.7 million aggregate principal amount of its 7³/8% senior notes due 2012, pursuant to the company's previously announced cash tender offer for up to $350.0 million of the $700.0 million aggregate principal amount of the senior notes. The company used the proceeds from the January 2012 $275.0 million Term Loan discussed above, along with available cash to fund the tender offer. As a result of the tender, the company recorded expenses in January 2012 of approximately $13.9 million related to the tender premium, unamortized financing fee write-offs, and tender expenses.

5.125% Convertible Senior Notes, due 2014

        In June 2009, the company issued $287.5 million of 5.125% convertible senior notes due June 2014. The net proceeds from these notes, along with the issuance of common stock was approximately $678.8 million and was used to prepay the term A loan on the senior secured credit facility as well as to repay a portion of the company's revolving credit facility then outstanding.

        The 5.125% convertible senior notes due 2014 are non-cancelable for five years and bear interest at 5.125% payable semi-annually in arrears on June 15 and December 15 of each year. Note holders can convert the notes into the company's common stock at an initial conversion rate of 56.9801 per $1,000 principal amount of notes (16,381,779 shares.) The conversion rate is fixed, except for standard anti-dilution provisions related to such events as the issuance of common stock as a dividend or distribution, the effect of a share split or share combination, issuance to all or substantially all holders of our common stock certain rights or warrants to subscribe for or purchase shares of our common stock, pay cash dividends or distributions to all or substantially all holders of our common stock other than regular quarterly cash dividends exceeding an established threshold amount per share, or if we make a payment in respect of a tender offer or exchange offer for our common stock. In addition, on or after June 20, 2012, if the last reported sales price of the company's common stock for 20 or more trading days in a period of 30 consecutive trading days ending on the trading day prior to the date the company provides the notice of redemption to holders exceeds 130% of the applicable conversion price (currently $17.55 per share) in effect on each such trading day, the company may redeem for cash all or part of the notes at a price equal to 100% of the principal amount of the notes to be redeemed, plus accrued and unpaid interest. The 5.125% convertible senior notes are equal in right of payment with all existing and future senior unsecured indebtedness and senior in right of payment to all subordinated indebtedness.

6³/4% Senior Notes, due 2015

        The $500.0 million of 6³/4% senior notes mature in 2015, and pay interest semiannually on April 1 and October 1 of each year. The 6³/4% senior notes contain provisions that allow the company to redeem the notes any time on or after April 1, 2011 at a redemption price of 103.375%, on or after April 1, 2012 at a redemption price of 101.688%, and on or after April 1, 2013 at 100.000%. The 6³/4% Notes are in equal right of payment with all existing and future senior unsecured indebtedness and senior in right of payment to all subordinated indebtedness.

7³/4% Senior Notes, due 2016

        The $500.0 million of 7³/4% senior notes mature in 2016, and pay interest semi-annually on April 15 and October 15 of each year. The company may redeem the 7³/4% senior notes at any time after April 15, 2012 at a redemption price of 103.875%, on or after April 15, 2013 at a redemption price of 101.938%, and on or after April 15, 2014 at a redemption price of 100.000%. The 7³/4% senior notes are equal in right of payment with all existing and future senior unsecured indebtedness and senior in right of payment to all subordinated indebtedness.

7⁵/8% Senior Notes, due 2020

        In March 2010, the company issued $350.0 million of 7⁵/8% senior notes due 2020. The net proceeds from the 7⁵/8% senior notes were used to repay the then outstanding amounts under the company's senior secured revolving credit facility and for general corporate purposes.

        The 7⁵/8% senior notes mature in 2020, and pay interest semi-annually on March 15 and September 15 of each year. Prior to March 15, 2013, the company may redeem up to 35% of the principal amount of the 7⁵/8% senior notes with the net cash proceeds of one or more sales of its common stock at a redemption price of 107.625%. In addition, the company may redeem the 7⁵/8% senior notes at any time after March 15, 2015 at a redemption price of 103.813%, on or after March 15, 2016 at a redemption price of 102.542%, on or after March 15, 2017 at a redemption price of 101.271%, and on or after March 15, 2018 at a redemption price of 100.000%. The 7⁵/8% senior notes are equal in right of payment with all existing and future senior unsecured indebtedness and senior in right of payment to all subordinated indebtedness.

Other Secured Obligations

        State and Local Government Municipal Bond Issues.    In November 1998, the company received $10.0 million from Whitley County, Indiana, representing proceeds from solid waste and sewage disposal revenue bonds to be used to finance certain solid waste and sewage disposal facilities. Interest at 7.3% was payable semi-annually and principal payments were due through final maturity in 2018. The company repaid the outstanding principal balance of $7.1 million during 2011.

        Electric Utility Development Loans.    In April 2002, the company received $9.8 million from the Northeastern Rural Electric Membership Corporation (REMC) and Wabash Valley Power Association, Inc. to finance the company's portion of the cost to construct a transmission line and certain related facilities at the Structural and Rail Division. The loan bears interest at 8.1%, with monthly principal and interest payments required through maturity in 2022. The company established an unused $4.0 million stand-by letter of credit for the REMC agreement. The outstanding principal balance on the transmission facility loan was $6.9 million and $7.3 million as of December 31, 2011 and 2010, respectively.

        Mesabi Nugget Loan Participation.    Pursuant to the construction and financing of the Mesabi Nugget iron-nugget project, the company entered into financing arrangements with Mesabi Nugget. The amended agreements provided Mesabi Nugget with an $85.0 million revolving credit facility and $240 million in a term facility. Under these agreements, the company is the lender (with first lien security rights on substantially all of Mesabi Nugget's assets) and Mesabi Nugget is the borrower. Under one of the term agreements the company sold and assigned to Kobe a participation interest, for which Kobe provided $25.0 million in 2009 and an additional $10 million in 2010, which was also included in the company's consolidated other long term debt at December 31, 2010. Effective December 31, 2010, the company converted $130.0 million (81% of the total conversion amount) of term notes into equity of Mesabi Nugget, and Kobe converted $30.5 million (19% of the total conversion amount) of its $35.0 million loan participation into equity of Mesabi Nugget. The remaining portion of the outstanding loan balances between the company and Mesabi Nugget are eliminated through consolidation. The remaining $4.5 million (less current portion of $901,000) of Kobe loan participation is included in the company's consolidated other long term debt at December 31, 2011. The weighted average interest rate on this debt at December 31, 2011 was 2.8%.

        Minnesota Economic Development State Loans.    During 2009 and 2010, Mesabi Nugget received $26.5 million from various Minnesota state agencies for the construction and ultimate operation of the company's Mesabi Nugget project. Monthly principal and interest payments begin in August 2012. The 3.5% interest rate at December 31, 2011 is expected to remain through February 2017, and then change to 5.0% through maturity in 2027. Amounts due under these loans were $26.5 million at December 31, 2011 and 2010.

Outstanding Debt Maturities

        Maturities of outstanding debt as of December 31, 2011; considering the January 2012 issuance of a $275.0 million Term Loan and payment of $279.7 million of the $700.0 million of 7³/8% senior notes due in November 2012, are as follows (in thousands):

2012	$	444,078
2013		16,770
2014		318,111
2015		544,421
2016		682,461
Thereafter		374,259
	$	2,380,100

        The company capitalizes interest on all appropriate construction-in-progress assets. For the years ended December 31, 2011, 2010 and 2009, total interest costs incurred were $178.7 million, $177.2 million, and $162.3 million, respectively, of which $1.7 million, $7.0 million and $20.9 million, respectively, were capitalized. Cash paid for interest was $171.8 million, $162.4 million, and $156.2 million for the years ended December 31, 2011, 2010, and 2009, respectively.

XML

Quarterly Financial Information (unaudited, in thousands, except per share data) (Details) (USD $) In Thousands, except Per Share data, unless otherwise specified	3 Months Ended								12 Months Ended
	Dec. 31, 2011	Sep. 30, 2011	Jun. 30, 2011	Mar. 31, 2011	Dec. 31, 2010	Sep. 30, 2010	Jun. 30, 2010	Mar. 31, 2010	Dec. 31, 2011	Dec. 31, 2010	Dec. 31, 2009
Quarterly Financial Information (unaudited, in thousands, except per share data)
Net sales	$ 1,858,345	$ 2,043,455	$ 2,079,731	$ 2,015,969	$ 1,528,134	$ 1,584,164	$ 1,632,799	$ 1,555,790	$ 7,997,500	$ 6,300,887	$ 3,958,806
Gross profit	160,135	199,243	276,386	295,754	133,668	139,532	191,984	210,482	931,518	675,666	399,076
Operating income	82,490	108,785	188,219	205,326	46,821	69,000	116,635	132,297	584,820	364,753	119,531
Net income	25,779	39,857	95,826	104,230	4,058	15,355	46,797	63,389	265,692	129,599	(11,019)
Net income attributable to Steel Dynamics, Inc.	$ 30,203	$ 43,304	$ 98,710	$ 105,903	$ 7,792	$ 18,741	$ 49,207	$ 64,969	$ 278,120	$ 140,709	$ (8,184)
Earnings per share:
Basic	$ 0.14	$ 0.20	$ 0.45	$ 0.49	$ 0.04	$ 0.09	$ 0.23	$ 0.30	$ 1.27	$ 0.65	$ (0.04)
Diluted	$ 0.14	$ 0.19	$ 0.43	$ 0.46	$ 0.04	$ 0.09	$ 0.22	$ 0.29	$ 1.22	$ 0.64	$ (0.04)

XML

Long-Term Debt (Details 2) (USD $)	12 Months Ended			1 Months Ended
	Dec. 31, 2011	Dec. 31, 2010	Dec. 31, 2009	Jan. 31, 2012 Term Loan maturing in 2016	Jan. 31, 2012 7 3/8% senior notes, due 2012	Dec. 31, 2011 7 3/8% senior notes, due 2012	Dec. 31, 2010 7 3/8% senior notes, due 2012
Long Term Debt
Additional borrowings				$ 275,000,000
Repayments of Debt	7,740,000	346,963,000	1,690,557,000		279,700,000
Carrying amount of long-term debt, including current maturities	2,380,100,000	2,386,821,000				700,000,000	700,000,000
Note stated interest rate (as a percent)					7.375%	7.375%	7.375%
Maturities of outstanding debt
2012	444,078,000
2013	16,770,000
2014	318,111,000
2015	544,421,000
2016	682,461,000			158,000,000
Thereafter	374,259,000
Total debt	2,380,100,000	2,386,821,000				700,000,000	700,000,000
Interest costs
Interest costs incurred	178,700,000	177,200,000	162,300,000
Interest costs incurred capitalized	1,700,000	7,000,000	20,900,000
Cash paid for interest	$ 171,800,000	$ 162,400,000	$ 156,200,000

XML

Commitments and Contingencies (Tables)

12 Months Ended

Dec. 31, 2011

Commitments and Contingencies

Schedule of commitments for agreements with "take or pay" or other similar commitment provisions

2012	$	122,705
2013		10,237
2014		1,737
2015		1,561
2016		1,561
Thereafter		5,197
	$	142,998

XML

Fair Value Measurements (Tables)

12 Months Ended

Dec. 31, 2011

Fair Value Measurements

Schedule of assets and liabilities measured at fair value on a recurring basis

	Total		Quoted Prices in Active Markets for Identical Assets (Level 1)		Significant Other Observable Inputs (Level 2)		Significant Unobservable Inputs (Level 3)
2011
Investment in short-term commercial paper	$	84,830	$	—	$	84,830	$	—
Commodity futures—financial assets		3,159		—		3,159		—
Commodity futures—financial liabilities		4,378		—		4,378		—
2010
Commodity futures—financial assets		7,052		—		7,052		—
Commodity futures—financial liabilities		12,040		—		12,040		—

XML

Segment Information (Details) (USD $) In Thousands, unless otherwise specified	3 Months Ended								12 Months Ended
	Dec. 31, 2011	Sep. 30, 2011	Jun. 30, 2011	Mar. 31, 2011	Dec. 31, 2010	Sep. 30, 2010	Jun. 30, 2010	Mar. 31, 2010	Dec. 31, 2011 Segment	Dec. 31, 2010	Dec. 31, 2009
Segment Information
Number of reporting segments									3
Segment Reporting Information
Net Sales, External									$ 7,519,048	$ 5,948,184	$ 3,772,948
Net Sales, External Non-U.S.									478,452	352,703	185,858
Total net sales	1,858,345	2,043,455	2,079,731	2,015,969	1,528,134	1,584,164	1,632,799	1,555,790	7,997,500	6,300,887	3,958,806
Operating income (loss)	82,490	108,785	188,219	205,326	46,821	69,000	116,635	132,297	584,820	364,753	119,531
Income (loss) before income taxes									424,319	213,459	(18,237)
Depreciation and amortization									222,607	224,698	221,426
Capital expenditures									167,007	133,394	330,052
Assets	5,979,226				5,589,934				5,979,226	5,589,934	5,129,872
Liabilities	3,608,632				3,458,804				3,608,632	3,458,804	3,126,607
Steel Operations
Segment Reporting Information
Net Sales, External									4,676,898	3,726,869	2,443,709
Net Sales, External Non-U.S.									182,319	103,061	67,394
Net Sales, Other segments									211,089	169,709	95,866
Total net sales									5,070,306	3,999,639	2,606,969
Operating income (loss)									658,120	439,795	196,225
Income (loss) before income taxes									574,108	363,352	127,701
Depreciation and amortization									108,477	112,471	104,184
Capital expenditures									43,998	51,695	68,968
Assets	2,598,767				2,551,885				2,598,767	2,551,885	2,373,700
Liabilities	495,425				422,764				495,425	422,764	330,949
Metals Recycling and Ferrous Resources Operations
Segment Reporting Information
Net Sales, External									2,473,511	1,966,518	1,121,803
Net Sales, External Non-U.S.									295,552	248,870	118,351
Net Sales, Other segments									1,383,505	963,644	441,979
Total net sales									4,152,568	3,179,032	1,682,133
Operating income (loss)									26,597	19,686	(4,709)
Income (loss) before income taxes									(16,706)	(26,988)	(42,360)
Depreciation and amortization									101,893	102,027	105,627
Capital expenditures									103,142	55,982	251,695
Assets	2,561,722				2,464,835				2,561,722	2,464,835	2,318,827
Liabilities	528,629				444,170				528,629	444,170	453,225
Steel Fabrication Operations
Segment Reporting Information
Net Sales, External									275,783	177,055	156,499
Net Sales, Other segments									625	323	1,509
Total net sales									276,408	177,378	158,008
Operating income (loss)									(6,584)	(25,056)	(6,356)
Income (loss) before income taxes									(13,573)	(30,539)	(11,861)
Depreciation and amortization									6,751	5,894	6,060
Capital expenditures									2,205	492	(473)
Assets	227,663				206,810				227,663	206,810	169,416
Liabilities	13,768				18,361				13,768	18,361	25,208
Other
Segment Reporting Information
Net Sales, External									92,856	77,742	50,937
Net Sales, External Non-U.S.									581	772	113
Net Sales, Other segments									11,711	9,841	5,796
Total net sales									105,148	88,355	56,846
Operating income (loss)									(95,141)	(66,189)	(45,356)
Income (loss) before income taxes									(121,233)	(88,007)	(68,793)
Depreciation and amortization									5,690	4,493	5,555
Capital expenditures									17,662	28,857	12,443
Assets	789,322				562,961				789,322	562,961	469,389
Liabilities	2,759,894				2,746,798				2,759,894	2,746,798	2,514,423
Eliminations
Segment Reporting Information
Net Sales, Other segments									(1,606,930)	(1,143,517)	(545,150)
Total net sales									(1,606,930)	(1,143,517)	(545,150)
Operating income (loss)									1,828	(3,483)	(20,273)
Income (loss) before income taxes									1,723	(4,359)	(22,924)
Depreciation and amortization									(204)	(187)
Capital expenditures										(3,632)	(2,581)
Assets	(198,248)				(196,557)				(198,248)	(196,557)	(201,460)
Liabilities	$ (189,084)				$ (173,289)				$ (189,084)	$ (173,289)	$ (197,198)

XML

Income Taxes (Details) (USD $)	12 Months Ended
	Dec. 31, 2011	Dec. 31, 2010	Dec. 31, 2009
Income Taxes
Net cash paid (received) for taxes	$ 75,900,000	$ (66,300,000)	$ (59,400,000)
Income tax expense (benefit)
Current income tax expense (benefit)	128,209,000	39,554,000	(96,140,000)
Deferred income tax expense	30,418,000	44,306,000	88,922,000
Total income tax expense (benefit)	158,627,000	83,860,000	(7,218,000)
Effective tax rate
Statutory federal tax rate (as a percent)	35.00%	35.00%	35.00%
State income taxes, net of federal benefit (as a percent)	3.50%	3.20%	1.90%
Other permanent differences (as a percent)	(1.10%)	1.10%	2.70%
Effective tax rate (as a percent)	37.40%	39.30%	39.60%
Deferred tax assets
Capitalized start-up costs	29,182,000	29,728,000
Assets capitalized for tax, expensed for books	32,711,000	28,017,000
Accrued expenses	31,824,000	26,122,000
Total deferred tax assets	93,717,000	83,867,000
Deferred tax liabilities
Property, plant and equipment	(471,847,000)	(448,557,000)
Intangible assets	(79,778,000)	(69,455,000)
Other	(6,666,000)	(2,603,000)
Total deferred tax liabilities	(558,291,000)	(520,615,000)
Net deferred tax liability	$ (464,574,000)	$ (436,748,000)

XML

Transactions with Affiliated Companies (Tables)

12 Months Ended

Dec. 31, 2011

Heidtman Steel Products (Heidtman)

Transactions with affiliated entities

Schedule of transactions with affiliated companies

	2011			2010			2009
Sales	$	242,300		$	202,897		$	132,272
Percentage of consolidated net sales		3	%		3	%		3	%
Accounts receivable		35,646			31,544			26,983
Purchases		18,998			18,275			11,864
Accounts payable		882			969			468

Other smaller affiliated entities

Transactions with affiliated entities

Schedule of transactions with affiliated companies

	2011		2010		2009
Sales	$	36,486	$	37,057	$	16,156
Accounts receivable		7,247		6,577		3,573
Purchases		239,395		177,166		81,926
Accounts payable		5,702		12,601		6,297

XML

Leases (Tables)

12 Months Ended

Dec. 31, 2011

Leases

Schedule of future minimum payments of non-cancelable operating leases

2012	$	11,874
2013		9,000
2014		6,507
2015		4,609
2016		3,870
Thereafter		5,506
	$	41,366

XML

Description of the Business and Summary of Significant Accounting Policies

12 Months Ended

Dec. 31, 2011

Description of the Business and Summary of Significant Accounting Policies

Description of the Business and Summary of Significant Accounting Policies

Note 1. Description of the Business and Summary of Significant Accounting Policies

Description of the Business

        Steel Dynamics, Inc. (SDI), together with its subsidiaries (the company), is a domestic manufacturer of steel products and metals recycler. The company has three reporting segments: steel operations, metals recycling and ferrous resources operations, and steel fabrication operations. Approximately 11% of the company's workforce is represented by collective bargaining agreements, and two of these agreements effecting 72 employees at two locations expire during 2012.

Steel Operations

        Steel operations include the company's Flat Roll Division, Structural and Rail Division, Engineered Bar Products Division, Roanoke Bar Division, Steel of West Virginia and The Techs operations. These operations consist of mini-mills, producing steel from steel scrap, using electric arc furnaces, continuous casting, automated rolling mills, and downstream finishing facilities. Steel operations accounted for 61%, 61%, and 63% of the company's consolidated net sales during 2011, 2010, and 2009, respectively. The Flat Roll Division accounted for 27%, 28%, and 28% of the company's consolidated net sales during 2011, 2010, and 2009, respectively.

        The Flat Roll Division sells a broad range of hot rolled, cold rolled and coated steel products, including a large variety of specialty products such as light gauge hot rolled, galvanized, and painted products. The Structural and Rail Division sells structural steel beams, pilings and a variety of rail for the railroad industry. The Engineered Bar Products Division primarily sells special bar quality and merchant bar quality rounds and round-cornered squares. The Roanoke Bar Division sells billets and merchant steel products, including angles, plain rounds, flats and channels. Steel of West Virginia primarily sells merchant beams, channels and specialty structural steel sections. The Techs operates three galvanizing lines specializing in the galvanizing of specific types of flat rolled steels in non-automotive applications. The company's steel operations sell directly to end users and service centers. These products are used in numerous industry sectors, including the automotive, construction, commercial, transportation and industrial machinery markets.

Metals Recycling and Ferrous Resources Operations

        Metals recycling and ferrous resources operations include OmniSource Corporation (OmniSource), the company's metals recycling, steel scrap procurement, and processing locations, and our two ironmaking initiatives: Iron Dynamics (IDI), a liquid pig iron production facility; and our Minnesota iron operations, an iron nugget production facility and planned operations to supply the nugget facility with its primary raw material, iron concentrate. IDI primarily produces liquid pig iron, which is used as a scrap substitute raw material input exclusively at our Flat Roll Division. Our Minnesota iron operations consists of Mesabi Nugget, (owned 81% by us); our planned future iron mining operations which is currently in the permitting process, Mesabi Mining; and, our planned iron tailings operation, Mining Resources (owned 80% by us.) The construction of the Mesabi Nugget facility was completed in 2009, and initial production of iron nuggets commenced January 2010. Throughout 2010 and 2011, we have refined this pioneering production process and changed equipment configurations to increase production and plant availability. The facility's anticipated annual production capacity is 500,000 metric tons. In 2011 and 2010, Mesabi Nugget produced 156,000 and 75,000 metric tons of iron-nuggets, respectively, for use by our own steel mills. We are currently constructing the iron tailings operation, which is expected to start up in the third quarter of 2012. This operation, which involves the extraction of iron tailings from previously developed stockpiles or water-filled tailings basins, is planned to provide iron ore tailings to be concentrated for use by Mesabi Nugget as a low-cost iron concentrate to the nugget production process. Metals recycling ferrous resources operations accounted for 35%, 35%, and 31% of the company's consolidated net sales during 2011, 2010, and 2009, respectively.

        Three years subsequent to Mesabi Nugget achieving certain performance measures (which as of December 31, 2011, had not been met), the noncontrolling investor may elect to require the company to purchase at par value all (but not less than all) of the units it owns at the time of such election. At any time after that same date, the company may elect to purchase at par value all of the units owned by the noncontrolling investor. The $65.7 million and $54.3 million par value owned by the noncontrolling investor at December 31, 2011 and 2010, respectively, has been reported as redeemable noncontrolling interest in the consolidated balance sheets.

        On the fifth anniversary of the effective date of the formation of Mining Resources, the noncontrolling investor has a non-transferable, non-assignable right to require the company to purchase at fair value all (but not less than all) of the units it owns at that time. The $5.0 million value owned by the noncontrolling investor at December 31, 2011, has been reported as redeemable noncontrolling interest in the consolidated balance sheet.

Steel Fabrication Operations

        Steel fabrication operations include the company's six New Millennium Building System's joist and deck plants located throughout the United States and Northern Mexico. Revenues from these plants are generated from the fabrication of trusses, girders, steel joists and steel decking used within the non-residential construction industry. Steel fabrication operations accounted for 3%, 3%, and 4% of the company's consolidated net sales during 2011, 2010, and 2009, respectively.

Summary of Significant Accounting Policies

Principles of Consolidation

        The consolidated financial statements include the accounts of SDI, together with its wholly and majority owned or controlled subsidiaries, after elimination of significant intercompany accounts and transactions. Noncontrolling interests represent the noncontrolling owner's proportionate share in the equity, income, or losses of the company's majority-owned or controlled consolidated subsidiaries.

Use of Estimates

        These financial statements are prepared in conformity with accounting principles generally accepted in the United States, and accordingly, include amounts that require management to make estimates and assumptions that affect the amounts reported in the financial statements and in the notes thereto. Significant items subject to such estimates and assumptions include the carrying value of property, plant and equipment, intangible assets and goodwill; valuation allowances for trade receivables, inventories and deferred income tax assets; unrecognized tax benefits; potential environmental liabilities; and litigation claims and settlements. Actual results may differ from these estimates and assumptions.

Revenue Recognition and Allowances for Doubtful Accounts

        Except for the steel fabrication operations segment, the company recognizes revenues from sales and the estimated allowance for returns from these sales at the time the title of the product transfers upon shipment. Provision is made for estimated product returns and customer claims based on estimates and actual historical experience. If the historical data used in the estimates does not reflect future returns and claims trends, additional provision may be necessary. The company's steel fabrication operations segment recognizes revenues from construction contracts using a percentage of completion methodology based on steel tons used on completed units to-date as a percentage of estimated total steel tons required by each contract. The allowance for doubtful accounts is based on the company's best estimate of probable credit losses, along with historical experience.

Cash and Equivalents

        Cash and equivalents include all highly liquid investments with a maturity of three months or less at the date of acquisition. Restricted cash is primarily funds held in escrow and deposits held at brokerage firms.

Inventories

        Inventories are stated at lower of cost or market. Cost is determined principally on a first-in, first-out, basis. Inventory consisted of the following at December 31 (in thousands):

	2011		2010
Raw materials	$	609,150	$	589,859
Supplies		251,716		231,816
Work in progress		106,609		94,346
Finished goods		232,109		198,042
	$	1,199,584	$	1,114,063

Investments

        The company has investments in certain joint ventures and closely-held companies in which ownership varies between 49% and 50%. For these investments where the company does not have effective control, the company accounts for the investment on the equity basis. Investments in companies in which the company does not exercise control and its ownership is less than 20% are carried at cost. These investments are reflected in other long-term assets on the company's balance sheet in an amount of $24.9 million and $27.1 million at December 31, 2011 and 2010, respectively.

Property, Plant and Equipment

        Property, plant and equipment are stated at cost, which includes capitalized interest on construction-in-progress amounts, or at fair market value for those purchased through acquisitions, and is reduced by proceeds received from certain state and local government grants and other capital cost reimbursements. The company assigns each fixed asset a useful life ranging from 3 to 15 years for plant, machinery and equipment and 10 to 40 years for buildings and improvements. Repairs and maintenance are expensed as incurred. Depreciation is provided utilizing the straight-line depreciation methodology or the units-of-production depreciation methodology, based on units produced, subject to a minimum and maximum level. Depreciation expense was $176.5 million, $171.7 million, and $158.9 million for the years ended December 31, 2011, 2010, and 2009, respectively.

        The company's property, plant and equipment at December 31 consisted of the following (in thousands):

	2011		2010
Land and improvements	$	271,208	$	257,756
Buildings and improvements		496,976		480,434
Plant, machinery and equipment		2,656,358		2,571,850
Construction in progress		127,019		96,586
		3,551,561		3,406,626
Less accumulated depreciation		1,357,816		1,193,293
Property, plant and equipment, net	$	2,193,745	$	2,213,333

Intangible Assets

        The company's intangible assets, at December 31, consisted of the following (in thousands):

	2011		2010		Useful Life	Weighted Average Amortization Period
Customer and scrap generator relationships	$	408,400	$	408,400	10 to 25 years		20 years
Trademarks		189,800		189,800	Indefinite		—
Trademarks		19,700		19,700	4 to 12 years		12 years
Other		14,220		14,220	3 months to 6 years		5 years
		632,120		632,120			19 years
Less accumulated amortization		181,227		142,880
	$	450,893	$	489,240

        The company utilizes an accelerated amortization methodology for customer and scrap generator relationships in order to follow the pattern in which the economic benefits of the amounts are anticipated to be consumed. Finite-lived trademarks are amortized using a straight line methodology. Amortization of intangible assets was $38.3 million, $44.3 million, and $52.4 million for the years ended December 31, 2011, 2010, and 2009, respectively. Estimated amortization expense, related to amortizable intangibles, for the years ending December 31 is as follows (in thousands):

2012	$	34,258
2013		30,476
2014		26,090
2015		23,390
2016		20,902
Thereafter		125,977
Total	$	261,093

Impairment of Long-Lived Tangible and Finite-Lived Intangible Assets

        The company reviews long-lived assets for impairment whenever events or changes in circumstances indicate the carrying amount of such assets may not be recoverable. Impairment losses are recorded on long-lived assets used in operations when indicators of impairment are present and the undiscounted cash flows estimated to be generated by those assets are less than the assets' carrying amounts. The impairment loss is measured by comparing the fair value of the asset to its carrying amount. We consider various factors and determine whether an impairment test is necessary, including by way of examples, a significant and prolonged deterioration in operating results and projected cash flows, significant changes in the extent or manner in which an asset is used, technological advances with respect to assets which would potentially render them obsolete, our strategy and capital planning, and the economic climate in markets to be served.

        After the purchase of additional fabrication assets in the fourth quarter of 2010 and determining the future use of existing fabrication facilities, the company determined that the carrying value of certain fixed assets at its idled South Carolina fabrication facility exceeded their fair value as determined utilizing market and cost approaches. The resulting impairment charge of $12.8 million was recorded within the steel fabrication reporting segment in 2010.

Goodwill

        The company's goodwill is allocated to the following reporting units at December 31, (in thousands):

	2011		2010
OmniSource—Metals Recycling/Ferrous Resources Segment	$	571,317	$	577,926
The Techs—Steel Segment		142,783		142,783
Roanoke Bar Division—Steel Segment		29,041		29,041
New Millennium Building Systems—Steel Fabrication Segment		1,925		1,925
	$	745,066	$	751,675

        OmniSource goodwill decreased $6.6 million from December 31, 2010 to December 31, 2011 in recognition of the 2011 tax benefit related to the amortization of the component of OmniSource tax-deductible goodwill in excess of book goodwill.

Impairment of Goodwill and Indefinite-Lived Intangible Assets

        At least once annually or when indicators of impairment exist, the company performs an impairment test for goodwill and other indefinite-lived intangible assets. Goodwill is allocated to various reporting units, which are generally one level below the company's operating segments. The company utilizes a two-stepped approach to measuring goodwill impairment. The first step of the test determines if there is potential goodwill impairment. In this step the company compares the fair value of the reporting unit to its carrying amount (which includes goodwill). The fair value of the reporting unit is determined by using an estimate of future cash flows utilizing a risk-adjusted discount rate to calculate the net present value of future cash flows, and assessing its reasonableness by using a market approach based upon an analysis of valuation metrics of comparable peer companies. If the carrying amount exceeds the fair value, the company performs the second step of the test, which measures the amount of impairment loss to be recorded, if any. In the second step, the company compares the carrying amount of the goodwill to the implied fair value of the goodwill based on the net fair value of the recognized and unrecognized assets and liabilities of the reporting unit. If the implied fair value is less than the carrying value, an impairment loss is recorded to the extent that the fair value of the goodwill is less than its carrying value.

        The company tests indefinite-lived intangible assets for impairment through the comparison of the fair value of the specific intangible asset with its carrying amount. The fair value of the intangible asset is determined by using an estimate of future cash flows attributable to the asset and a risk-adjusted discount rate to compute a net present value of future cash flows. If the fair value is less than the carrying value, an impairment loss is recorded in an amount equal to the excess in carrying value.

Equity-Based Compensation

        The company has several stock-based employee compensation plans which are more fully described in Note 5. Compensation expense for stock options is recorded over the vesting period using the fair value on the grant date, as calculated using the Black-Scholes model. Compensation expense for stock-based employee compensation plans, including stock options, was $14.8 million, $12.5 million, and $13.2 million for the years ended December 31, 2011, 2010, and 2009, respectively.

Income Taxes

        The company accounts for income taxes and the related accounts under the liability method. Deferred tax liabilities and assets are determined based on the difference between the financial statement and tax bases of assets and liabilities using enacted rates expected to be in effect during the year in which the basis differences reverse.

Earnings (Loss) Per Share

        Basic earnings (loss) per share is based on the weighted average shares of common stock outstanding during the period. Diluted earnings per share assumes the weighted average dilutive effect of common share equivalents outstanding during the period applied to the company's basic earnings per share. Common share equivalents represent potentially dilutive stock options and dilutive shares related to the company's convertible subordinated debt and are excluded from the computation in periods in which they have an anti-dilutive effect. Options to purchase 4.0 million shares, 3.1 million shares, and 2.1 million shares were anti-dilutive at December 31, 2011, 2010 and 2009, respectively. Due to the company's net loss for the year ended December 31, 2009, the computation of diluted net loss per share did not include the after-tax equivalent of interest of $5.0 million for the company's 5.125% senior convertible notes, due 2014 and the related weighted average equivalent of 8.4 million shares.

        The following table presents a reconciliation of the numerators and the denominators of the company's basic and diluted earnings (losses) per share computations for the years ended December 31 (in thousands, except per share data):

	2011						2010
	Net Income (Numerator)		Shares (Denominator)		Per Share Amount		Net Income (Numerator)		Shares (Denominator)		Per Share Amount
Basic earnings per share	$	278,120		218,471	$	1.27	$	140,709		216,760	$	.65
Dilutive stock options		—		1,139				—		1,575
5.125% convertible senior notes		9,432		16,382				9,508		16,382
Diluted earnings per share	$	287,552		235,992	$	1.22	$	150,217		234,717	$	.64

	2009
	Net Loss (Numerator)			Shares (Denominator)		Per Share Amount
Basic loss per share	$	(8,184	)		200,704	$	(.04	)
Dilutive stock options		—			—
4.0% convertible subordinated notes		—			—
Diluted loss per share	$	(8,184	)		200,704	$	(.04	)

Concentration of Credit Risk

        Financial instruments that potentially subject the company to significant concentrations of credit risk principally consist of temporary cash investments, short-term commercial paper, and accounts receivable. The company places its temporary cash and short-term commercial paper investments with high credit quality financial institutions and companies, and limits the amount of credit exposure from any one entity. The company is exposed to credit risk in the event of nonpayment by customers. The company mitigates its exposure to credit risk, which it generally extends initially on an unsecured basis, by performing ongoing credit evaluations and taking further action if necessary, such as requiring letters of credit or other security interests to support the customer receivable. Management's estimation of the allowance for doubtful accounts is based upon known credit risks, historical loss experience and current economic conditions affecting the company's customers. Customer accounts receivable are charged off when all collection efforts have been exhausted and the amounts are deemed uncollectible. Heidtman Steel Products (Heidtman), a related party, accounted for 5% of the company's net accounts receivable at December 31, 2011 and 2010.

Derivative Financial Instruments

        The company recognizes all derivatives as either assets or liabilities in the consolidated balance sheets and measures those instruments at fair value. Derivatives that are not designated as hedges must be adjusted to fair value through income. Changes in the fair value of derivatives that are designated as hedges, depending on the nature of the hedge, are recognized as either an offset against the change in fair value of the hedged balance sheet item in the case of fair value hedges or as other comprehensive income in the case of cash flow hedges, until the hedged item is recognized in earnings. The ineffective portion of a derivative's change in fair value is immediately recognized in earnings as other income or expense.

        In the normal course of business, the company may have involvement with derivative financial instruments related to managing fluctuations in interest rates, foreign exchange rates, and forward contracts in various commodities. The company periodically employs interest rate swap and forward-rate agreements, and foreign currency exchange contracts as necessary. At the time of acquiring financial instruments, the company designates and assigns these instruments as hedges of specific assets, liabilities or anticipated transactions. When hedged assets or liabilities are sold or extinguished, or the anticipated transaction being hedged is no longer expected to occur, the company recognizes the gain or loss on the designated hedged financial instrument. The company routinely enters into forward contracts in various commodities, primarily nonferrous metals in our Metals Recycling and Ferrous Resources operations, to reduce exposure to commodity related price fluctuations. These forward contracts do not meet hedging criteria and accordingly, the company recognizes the change in fair value related to these forward contracts in costs of goods sold. The company does not enter into derivative financial instruments for speculative purposes.

XML

Segment Information (Tables)

12 Months Ended

Dec. 31, 2011

Segment Information

Schedule of operating segment results

For the Year Ended December 31, 2011	Steel Operations		Metals Recycling / Ferrous Resources			Steel Fabrication Operations			Other			Eliminations			Consolidated
Net Sales
External	$	4,676,898	$	2,473,511		$	275,783		$	92,856		$	—		$	7,519,048
External Non-U.S.		182,319		295,552			—			581			—			478,452
Other segments		211,089		1,383,505			625			11,711			(1,606,930	)		—
		5,070,306		4,152,568			276,408			105,148			(1,606,930	)		7,997,500
Operating income (loss)		658,120		26,597			(6,584	)		(95,141)	(1)		1,828	(2)		584,820
Income (loss) before income taxes		574,108		(16,706	)		(13,573	)		(121,233	)		1,723			424,319
Depreciation and amortization		108,477		101,893			6,751			5,690			(204	)		222,607
Capital expenditures		43,998		103,142			2,205			17,662			—			167,007
As of December 31, 2011
Assets		2,598,767		2,561,722			227,663			789,322	(3)		(198,248)	(4)		5,979,226
Liabilities		495,425		528,629			13,768			2,759,894	(5)		(189,084)	(6)		3,608,632

Footnotes related to the twelve months ended December 31, 2011 segment results (in millions):

(1)	Corporate SG&A	$	(46.7	)	(2)	Gross profit increase from intra-company sales	$	1.8
	Company-wide stock option expense		(14.8	)
	Profit sharing		(35.1	)
	Other, net		1.5
		$	(95.1	)
(3)	Cash and equivalents	$	314.9		(4)	Elimination of intra-company receivables	$	(36.1	)
	Investments in short-term commercial paper		84.8			Elimination of intra-company debt		(152.8	)
	Income taxes receivable		16.7			Other		(9.3	)
	Deferred income taxes		25.3				$	(198.2	)
	Property, plant and equipment, net		85.7
	Debt issuance costs		23.9
	Intra-company debt		152.8
	Other		85.2
		$	789.3
(5)	Accounts payable	$	28.7		(6)	Elimination of intra-company payables	$	(36.1	)
	Income taxes payable		11.1			Elimination of intra-company debt		(152.8	)
	Accrued interest		33.7			Other		(0.2	)
	Accrued profit sharing		35.8				$	(189.1	)
	Debt		2,341.9
	Deferred income taxes		217.6
	Other		91.1
		$	2,759.9

For the Year Ended December 31, 2010	Steel Operations		Metals Recycling / Ferrous Resources			Steel Fabrication Operations			Other			Eliminations			Consolidated
Net Sales
External	$	3,726,869	$	1,966,518		$	177,055		$	77,742		$	—		$	5,948,184
External Non-U.S.		103,061		248,870			—			772			—			352,703
Other segments		169,709		963,644			323			9,841			(1,143,517	)		—
		3,999,639		3,179,032			177,378			88,355			(1,143,517	)		6,300,887
Operating income (loss)		439,795		19,686			(25,056	)		(66,189	)(1)		(3,483	)(2)		364,753
Income (loss) before income taxes		363,352		(26,988	)		(30,539	)		(88,007	)		(4,359	)		213,459
Depreciation and amortization		112,471		102,027			5,894			4,493			(187	)		224,698
Capital expenditures		51,695		55,982			492			28,857			(3,632	)		133,394
As of December 31, 2010
Assets(7)		2,551,885		2,464,835			206,810			562,961	(3)		(196,557	)(4)		5,589,934
Liabilities(7)		422,764		444,170			18,361			2,746,798	(5)		(173,289	)(6)		3,458,804

Footnotes related to the twelve months ended December 31, 2010 segment results (in millions):

(1)	Corporate SG&A	$	(31.6	)	(2)	Gross profit reduction from intra-company sales	$	(3.5	)
	Company-wide stock option expense		(12.5	)
	Profit sharing		(21.1	)
	Other, net		(1.0	)
		$	(66.2	)
(3)	Cash and equivalents	$	175.3		(4)	Elimination of intra-company receivables	$	(36.0	)
	Income taxes receivable		37.3			Elimination of intra-company debt		(134.8	)
	Deferred income taxes		20.7			Other		(25.8	)
	Property, plant and equipment, net		70.7				$	(196.6	)
	Debt issuance costs		23.3
	Intra-company debt		134.8
	Other		100.9
		$	563.0
(5)	Accounts payable	$	32.5		(6)	Elimination of intra-company payables	$	(36.0	)
	Income taxes payable		5.2			Elimination of intra-company debt		(134.8	)
	Accrued interest		33.7			Other		(2.5	)
	Accrued profit sharing		21.5				$	(173.3	)
	Debt		2,341.0
	Deferred income taxes		242.7
	Other		70.2
		$	2,746.8

(7)

Certain segment deferred tax asset and liability accounts have been reclassified at December 31, 2010, to conform to the December 31, 2011 presentation. These reclassifications had no impact to the previously reported segment income statement information or consolidated income statements as previously reported, nor did they impact previously reported consolidated total assets or liabilities.

For the Year Ended December 31, 2009	Steel Operations		Metals Recycling / Ferrous Resources			Steel Fabrication Operations			Other			Eliminations			Consolidated
Net Sales
External	$	2,443,709	$	1,121,803		$	156,499		$	50,937		$	—		$	3,772,948
External Non-U.S.		67,394		118,351			—			113			—			185,858
Other segments		95,866		441,979			1,509			5,796			(545,150	)		—
		2,606,969		1,682,133			158,008			56,846			(545,150	)		3,958,806
Operating income (loss)		196,225		(4,709	)		(6,356	)		(45,356	)(1)		(20,273	)(2)		119,531
Income (loss) before income taxes		127,701		(42,360	)		(11,861	)		(68,793	)		(22,924	)		(18,237	)
Depreciation and amortization		104,184		105,627			6,060			5,555			—			221,426
Capital expenditures		68,968		251,695			(473	)		12,443			(2,581	)		330,052
As of December 31, 2009
Assets(7)		2,373,700		2,318,827			169,416			469,389	(3)		(201,460	)(4)		5,129,872
Liabilities(7)		330,949		453,225			25,208			2,514,423	(5)		(197,198	)(6)		3,126,607

Footnotes related to the twelve months ended December 31, 2009 segment results (in millions):

(1)	Corporate SG&A	$	(26.5	)	(2)	Gross profit reduction from intra-company sales	$	(20.3	)
	Company-wide stock option expense		(13.2	)
	Profit Sharing		(2.2	)
	Other, net		(3.5	)
		$	(45.4	)
(3)	Income taxes receivable	$	137.0		(4)	Elimination of intra-company receivables	$	(27.0	)
	Deferred income taxes		21.5			Elimination of intra-company debt		(174.9	)
	Property, plant and equipments, net		44.5			Other		0.4
	Debt issuance costs		24.0				$	(201.5	)
	Intra-company debt receivable		174.9
	Other		67.5
		$	469.4
(5)	Accounts payable	$	37.8		(6)	Elimination of intra-company payables	$	(27.0	)
	Income taxes payable		5.7			Elimination of intra-company debt		(174.9	)
	Accrued interest		27.3			Other		4.7
	Accrued profit sharing		2.3				$	(197.2	)
	Debt		2,158.2
	Deferred income taxes		220.9
	Other		62.2
		$	2,514.4

(7)

Certain segment deferred tax asset and liability accounts have been reclassified at December 31, 2009, to conform to the December 31, 2011 presentation. These reclassifications had no impact to the previously reported segment income statement information or consolidated income statements as previously reported, nor did they impact previously reported consolidated total assets or liabilities.

XML

Description of the Business and Summary of Significant Accounting Policies (Details 6) (USD $)	3 Months Ended								12 Months Ended
	Dec. 31, 2011	Sep. 30, 2011	Jun. 30, 2011	Mar. 31, 2011	Dec. 31, 2010	Sep. 30, 2010	Jun. 30, 2010	Mar. 31, 2010	Dec. 31, 2011	Dec. 31, 2010	Dec. 31, 2009
Net Income (Numerator)
Basic earnings (loss) - net income (loss) (in dollars)	$ 30,203,000	$ 43,304,000	$ 98,710,000	$ 105,903,000	$ 7,792,000	$ 18,741,000	$ 49,207,000	$ 64,969,000	$ 278,120,000	$ 140,709,000	$ (8,184,000)
Diluted earnings (loss) - net income (loss) (in dollars)									287,552,000	150,217,000	(8,184,000)
Shares (Denominator)
Weighted average common shares outstanding (in shares)									218,471,000	216,760,000	200,704,000
Dilutive stock option effect (in shares)									1,139,000	1,575,000
Weighted average common shares outstanding - diluted (in shares)									235,992,000	234,717,000	200,704,000
Per Share Amount
Basic earnings (loss) per share (in dollars per share)	$ 0.14	$ 0.20	$ 0.45	$ 0.49	$ 0.04	$ 0.09	$ 0.23	$ 0.30	$ 1.27	$ 0.65	$ (0.04)
Diluted earnings (loss) per share (in dollars per share)	$ 0.14	$ 0.19	$ 0.43	$ 0.46	$ 0.04	$ 0.09	$ 0.22	$ 0.29	$ 1.22	$ 0.64	$ (0.04)
5.125% convertible senior notes, due 2014
Antidilutive securities excluded from computation of earnings per share amount
After-tax equivalent of interest excluded from computation of earnings (in dollars)											5,000,000
Stated interest rate (as a percent)											5.125%
Weighted average equivalent shares											8,400,000
Net Income (Numerator)
5.125% convertible senior notes, net of tax (in dollars)									$ 9,432,000	$ 9,508,000
Shares (Denominator)
5.125% convertible senior notes, net of tax (in shares)									16,382,000	16,382,000
Options
Antidilutive securities excluded from computation of earnings per share amount
Antidilutive securities excluded from computation of earnings per share amount (per shares)									4,000,000	3,100,000	2,100,000

XML

Transactions with Affiliated Companies (Details) (USD $) In Thousands, unless otherwise specified	1 Months Ended	12 Months Ended
	Sep. 30, 2009 year acre sqft	Dec. 31, 2011	Dec. 31, 2010	Dec. 31, 2009
Transactions with affiliated entities
Accounts receivable		$ 42,893	$ 38,121
Purchase price paid for land, building and equipment		167,007	133,394	330,052
Heidtman Steel Products (Heidtman)
Transactions with affiliated entities
Sales		242,300	202,897	132,272
Percentage of consolidated net sales		3.00%	3.00%	3.00%
Accounts receivable		35,646	31,544	26,983
Purchases		18,998	18,275	11,864
Accounts payable		882	969	468
Area of land (in acres)	32
Area of building (in square foot)	387,000
Lease term (in years)	5
Heidtman Steel Products (Heidtman) | Land and Building
Transactions with affiliated entities
Purchase price paid for land, building and equipment	9,300
Heidtman Steel Products (Heidtman) | Equipment
Transactions with affiliated entities
Purchase price paid for land, building and equipment	18,600
Other smaller affiliated entities
Transactions with affiliated entities
Sales		36,486	37,057	16,156
Accounts receivable		7,247	6,577	3,573
Purchases		239,395	177,166	81,926
Accounts payable		$ 5,702	$ 12,601	$ 6,297

XML

CONSOLIDATED BALANCE SHEETS (USD $) In Thousands, unless otherwise specified	Dec. 31, 2011	Dec. 31, 2010
Current assets
Cash and equivalents	$ 390,761	$ 186,513
Investment in short-term commercial paper	84,830
Accounts receivable, net of related allowances of $18,303 and $19,936 as of December 31, 2011 and 2010, respectively	679,898	584,068
Accounts receivable-related parties	42,893	38,121
Inventories	1,199,584	1,114,063
Deferred income taxes	25,341	20,684
Income taxes receivable	16,722	37,311
Other current assets	15,229	19,243
Total current assets	2,455,258	2,000,003
Property, plant and equipment, net	2,193,745	2,213,333
Restricted cash	26,528	23,132
Intangible assets, net of accumulated amortization of $181,227 and $142,880 as of December 31, 2011 and 2010, respectively	450,893	489,240
Goodwill	745,066	751,675
Other assets	107,736	112,551
Total assets	5,979,226	5,589,934
Current liabilities
Accounts payable	414,240	335,031
Accounts payable-related parties	6,584	13,570
Income taxes payable	10,880	5,227
Accrued payroll and benefits	68,752	62,051
Accrued profit sharing	38,671	23,524
Accrued interest	36,265	35,416
Accrued expenses	80,947	77,574
Current maturities of long-term debt	444,078	8,924
Total current liabilities	1,100,417	561,317
Long-term debt
Other long-term debt	37,272	40,397
Total long-term debt	1,936,022	2,377,897
Deferred income taxes	489,915	457,432
Other liabilities	82,278	62,159
Commitments and contingencies
Redeemable noncontrolling interests	70,694	54,294
Equity
Common stock voting, $.0025 par value; 900,000,000 shares authorized; 255,052,811 and 254,002,799 shares issued; and 218,873,720 and 217,574,826 shares outstanding, as of December 31, 2011 and 2010, respectively	636	633
Treasury stock, at cost; 36,179,091 and 36,427,973 shares, as of December 31, 2011, and 2010, respectively	(722,653)	(727,624)
Additional paid-in capital	1,026,157	998,728
Retained earnings	2,011,801	1,821,133
Total Steel Dynamics, Inc. equity	2,315,941	2,092,870
Noncontrolling interests	(16,041)	(16,035)
Total equity	2,299,900	2,076,835
Total liabilities and equity	5,979,226	5,589,934
7 3/8% senior notes, due 2012
Long-term debt
Senior notes	261,250	700,000
5.125% convertible senior notes, due 2014
Long-term debt
Convertible senior notes	287,500	287,500
6 3/4% senior notes, due 2015
Long-term debt
Senior notes	500,000	500,000
7 3/4% senior notes, due 2016
Long-term debt
Senior notes	500,000	500,000
7 5/8% senior notes, due 2020
Long-term debt
Senior notes	$ 350,000	$ 350,000

XML

Income Taxes (Details 2) (USD $)	12 Months Ended
	Dec. 31, 2011	Dec. 31, 2010	Dec. 31, 2009
Reconciliation of beginning and ending balance of unrecognized tax benefits
Balance at the beginning of the period	$ 49,396,000	$ 49,587,000	$ 47,875,000
Increases related to current year tax positions	2,046,000	300,000	780,000
Increases related to prior year tax positions	13,785,000	1,361,000	5,099,000
Decreases related to prior year tax positions	(196,000)	(496,000)	(3,766,000)
Lapses in statutes of limitations		(1,128,000)	(401,000)
Settlements with taxing authorities	(476,000)	(228,000)
Balance at the end of the period	64,555,000	49,396,000	49,587,000
Unrecognized tax benefits that, if recognized, would impact effective tax rate	24,600,000
Interest expenses, net of tax	3,100,000
Penalties	(35,000)
Accrued interest and penalties	16,100,000
Internal Revenue Service (IRS)
Income tax examinations
Expected payment of taxes as a result of audit settlement, lower bound	0
Expected payment of taxes as a result of audit settlement, upper bound	$ 2,300,000

XML

CONSOLIDATED STATEMENTS OF EQUITY (Parenthetical) (USD $) In Thousands, unless otherwise specified	12 Months Ended
	Dec. 31, 2009
CONSOLIDATED STATEMENTS OF EQUITY
Reversal of unrealized loss on interest rate swap, tax	$ 883

XML

Condensed Consolidating Information (Details) (USD $) In Thousands, unless otherwise specified	12 Months Ended
	Dec. 31, 2011	Dec. 31, 2010	Dec. 31, 2009	Dec. 31, 2008
Condensed Consolidating Financial Statements
Ownership interest in subsidiaries (as a percent)	100.00%
Cash and equivalents	$ 390,761	$ 186,513	$ 9,008	$ 16,233
Investment in short-term commercial paper	84,830
Accounts receivable, net	722,791	622,189
Inventories	1,199,584	1,114,063
Other current assets	57,292	77,238
Total current assets	2,455,258	2,000,003
Property, plant and equipment, net	2,193,745	2,213,333
Intangible assets, net	450,893	489,240
Goodwill	745,066	751,675
Other assets, including investments in subs	134,264	135,683
Total assets	5,979,226	5,589,934	5,129,872
Accounts payable	420,824	348,601
Accrued expenses	235,515	203,792
Current maturities of long-term debt	444,078	8,924
Total current liabilities	1,100,417	561,317
Long-term debt	1,936,022	2,377,897
Other liabilities	572,193	519,591
Redeemable noncontrolling interests	70,694	54,294
Common stock	636	633
Treasury stock	(722,653)	(727,624)
Additional paid-in capital	1,026,157	998,728
Retained earnings (deficit)	2,011,801	1,821,133
Total Steel Dynamics, Inc. equity	2,315,941	2,092,870
Noncontrolling interests	(16,041)	(16,035)
Total equity	2,299,900	2,076,835	2,003,265	1,632,313
Total liabilities and equity	5,979,226	5,589,934
Parent
Condensed Consolidating Financial Statements
Cash and equivalents	301,073	173,563	430	1,389
Investment in short-term commercial paper	84,830
Accounts receivable, net	319,995	283,883
Inventories	584,079	548,726
Other current assets	83,116	96,040
Total current assets	1,373,093	1,102,212
Property, plant and equipment, net	1,059,011	1,110,350
Other assets, including investments in subs	2,791,718	2,788,097
Total assets	5,223,822	5,000,659
Accounts payable	155,220	127,246
Accrued expenses	157,868	123,498
Current maturities of long-term debt	439,199	7,554
Total current liabilities	752,287	258,298
Long-term debt	1,905,199	2,344,399
Other liabilities	250,395	305,092
Common stock	636	633
Treasury stock	(722,653)	(727,624)
Additional paid-in capital	1,026,157	998,728
Retained earnings (deficit)	2,011,801	1,821,133
Total Steel Dynamics, Inc. equity	2,315,941	2,092,870
Total equity	2,315,941	2,092,870
Total liabilities and equity	5,223,822	5,000,659
Guarantors
Condensed Consolidating Financial Statements
Cash and equivalents	58,699	10,628	6,362	11,514
Accounts receivable, net	726,192	614,412
Inventories	533,022	487,298
Other current assets	4,119	9,757
Total current assets	1,322,032	1,122,095
Property, plant and equipment, net	660,048	684,118
Intangible assets, net	450,893	489,240
Goodwill	745,066	751,675
Other assets, including investments in subs	33,507	36,617
Total assets	3,211,546	3,083,745
Accounts payable	273,049	227,823
Accrued expenses	98,498	102,114
Current maturities of long-term debt	300	325
Total current liabilities	371,847	330,262
Other liabilities	2,132,778	2,158,725
Common stock	33,896	33,901
Additional paid-in capital	117,737	117,737
Retained earnings (deficit)	555,288	443,120
Total Steel Dynamics, Inc. equity	706,921	594,758
Total equity	706,921	594,758
Total liabilities and equity	3,211,546	3,083,745
Combined Non-Guarantors
Condensed Consolidating Financial Statements
Cash and equivalents	30,989	2,322	2,216	3,330
Accounts receivable, net	8,971	7,282
Inventories	85,046	84,183
Other current assets	2,304	3,444
Total current assets	127,310	97,231
Property, plant and equipment, net	477,514	421,897
Other assets, including investments in subs	9,853	7,601
Total assets	614,677	526,729
Accounts payable	23,195	26,015
Accrued expenses	10,012	8,497
Current maturities of long-term debt	53,551	34,604
Total current liabilities	86,758	69,116
Long-term debt	169,797	168,278
Other liabilities	51,625	27,072
Redeemable noncontrolling interests	70,694	54,294
Common stock	18,121	16,121
Additional paid-in capital	347,151	256,905
Retained earnings (deficit)	(113,428)	(49,022)
Total Steel Dynamics, Inc. equity	251,844	224,004
Noncontrolling interests	(16,041)	(16,035)
Total equity	235,803	207,969
Total liabilities and equity	614,677	526,729
Consolidating Adjustments
Condensed Consolidating Financial Statements
Accounts receivable, net	(332,367)	(283,388)
Inventories	(2,563)	(6,144)
Other current assets	(32,247)	(32,003)
Total current assets	(367,177)	(321,535)
Property, plant and equipment, net	(2,828)	(3,032)
Other assets, including investments in subs	(2,700,814)	(2,696,632)
Total assets	(3,070,819)	(3,021,199)
Accounts payable	(30,640)	(32,483)
Accrued expenses	(30,863)	(30,317)
Current maturities of long-term debt	(48,972)	(33,559)
Total current liabilities	(110,475)	(96,359)
Long-term debt	(138,974)	(134,780)
Other liabilities	(1,862,605)	(1,971,298)
Common stock	(52,017)	(50,022)
Additional paid-in capital	(464,888)	(374,642)
Retained earnings (deficit)	(441,860)	(394,098)
Total Steel Dynamics, Inc. equity	(958,765)	(818,762)
Total equity	(958,765)	(818,762)
Total liabilities and equity	$ (3,070,819)	$ (3,021,199)

XML

Description of the Business and Summary of Significant Accounting Policies (Details) (USD $) In Thousands, unless otherwise specified	12 Months Ended
	Dec. 31, 2011	Dec. 31, 2010	Dec. 31, 2009
Description of the Business and Summary of Significant Accounting Policies
Number of reporting segments	3
Workforce represented by collective bargaining agreements (as a percent)	11.00%
Number of collective bargaining agreements	2
Number of employees under collective bargaining agreements	72
Number of locations subject to collective bargaining	2
Number of iron making initiatives	2
Segment Reporting Information
Redeemable noncontrolling interests	70,694	54,294
Mesabi Nugget
Segment Reporting Information
Number of years subsequent to achievement of performance measures	3
Steel Operations
Segment Reporting Information
Percentage of external net sales	61.00%	61.00%	63.00%
Flat Roll Division
Segment Reporting Information
Percentage of external net sales	27.00%	28.00%	28.00%
Number of galvanizing lines	3
Metals Recycling and Ferrous Resources Operations
Segment Reporting Information
Percentage of external net sales	35.00%	35.00%	31.00%
Redeemable noncontrolling interests	65,700	54,300
Metals Recycling and Ferrous Resources Operations | Mesabi Nugget
Segment Reporting Information
Percentage of ownership interest in facility	81.00%
Anticipated annual production capacity of facility (in metric tons)	500,000
Actual annual production of facility (in metric tons)	156,000	75,000
Metals Recycling and Ferrous Resources Operations | Mining Resources
Segment Reporting Information
Percentage of ownership interest in facility	80.00%
Redeemable noncontrolling interests	5,000
Steel Fabrication Operations
Segment Reporting Information
Percentage of external net sales	3.00%	3.00%	4.00%
Number of plants	6

XML

Description of the Business and Summary of Significant Accounting Policies (Policies)

12 Months Ended

Dec. 31, 2011

Description of the Business and Summary of Significant Accounting Policies

Principles of Consolidation

Principles of Consolidation

        The consolidated financial statements include the accounts of SDI, together with its wholly and majority owned or controlled subsidiaries, after elimination of significant intercompany accounts and transactions. Noncontrolling interests represent the noncontrolling owner's proportionate share in the equity, income, or losses of the company's majority-owned or controlled consolidated subsidiaries.

Use of Estimates

Use of Estimates

        These financial statements are prepared in conformity with accounting principles generally accepted in the United States, and accordingly, include amounts that require management to make estimates and assumptions that affect the amounts reported in the financial statements and in the notes thereto. Significant items subject to such estimates and assumptions include the carrying value of property, plant and equipment, intangible assets and goodwill; valuation allowances for trade receivables, inventories and deferred income tax assets; unrecognized tax benefits; potential environmental liabilities; and litigation claims and settlements. Actual results may differ from these estimates and assumptions.

Revenue Recognition and Allowances for Doubtful Accounts

Revenue Recognition and Allowances for Doubtful Accounts

        Except for the steel fabrication operations segment, the company recognizes revenues from sales and the estimated allowance for returns from these sales at the time the title of the product transfers upon shipment. Provision is made for estimated product returns and customer claims based on estimates and actual historical experience. If the historical data used in the estimates does not reflect future returns and claims trends, additional provision may be necessary. The company's steel fabrication operations segment recognizes revenues from construction contracts using a percentage of completion methodology based on steel tons used on completed units to-date as a percentage of estimated total steel tons required by each contract. The allowance for doubtful accounts is based on the company's best estimate of probable credit losses, along with historical experience.

Cash and Equivalents

Cash and Equivalents

        Cash and equivalents include all highly liquid investments with a maturity of three months or less at the date of acquisition. Restricted cash is primarily funds held in escrow and deposits held at brokerage firms.

Inventories

Inventories

        Inventories are stated at lower of cost or market. Cost is determined principally on a first-in, first-out, basis. Inventory consisted of the following at December 31 (in thousands):

	2011		2010
Raw materials	$	609,150	$	589,859
Supplies		251,716		231,816
Work in progress		106,609		94,346
Finished goods		232,109		198,042
	$	1,199,584	$	1,114,063

Investments

Investments

        The company has investments in certain joint ventures and closely-held companies in which ownership varies between 49% and 50%. For these investments where the company does not have effective control, the company accounts for the investment on the equity basis. Investments in companies in which the company does not exercise control and its ownership is less than 20% are carried at cost. These investments are reflected in other long-term assets on the company's balance sheet in an amount of $24.9 million and $27.1 million at December 31, 2011 and 2010, respectively.

Property, Plant and Equipment

Property, Plant and Equipment

        Property, plant and equipment are stated at cost, which includes capitalized interest on construction-in-progress amounts, or at fair market value for those purchased through acquisitions, and is reduced by proceeds received from certain state and local government grants and other capital cost reimbursements. The company assigns each fixed asset a useful life ranging from 3 to 15 years for plant, machinery and equipment and 10 to 40 years for buildings and improvements. Repairs and maintenance are expensed as incurred. Depreciation is provided utilizing the straight-line depreciation methodology or the units-of-production depreciation methodology, based on units produced, subject to a minimum and maximum level. Depreciation expense was $176.5 million, $171.7 million, and $158.9 million for the years ended December 31, 2011, 2010, and 2009, respectively.

        The company's property, plant and equipment at December 31 consisted of the following (in thousands):

	2011		2010
Land and improvements	$	271,208	$	257,756
Buildings and improvements		496,976		480,434
Plant, machinery and equipment		2,656,358		2,571,850
Construction in progress		127,019		96,586
		3,551,561		3,406,626
Less accumulated depreciation		1,357,816		1,193,293
Property, plant and equipment, net	$	2,193,745	$	2,213,333

Intangible Assets

Intangible Assets

        The company's intangible assets, at December 31, consisted of the following (in thousands):

	2011		2010		Useful Life	Weighted Average Amortization Period
Customer and scrap generator relationships	$	408,400	$	408,400	10 to 25 years		20 years
Trademarks		189,800		189,800	Indefinite		—
Trademarks		19,700		19,700	4 to 12 years		12 years
Other		14,220		14,220	3 months to 6 years		5 years
		632,120		632,120			19 years
Less accumulated amortization		181,227		142,880
	$	450,893	$	489,240

        The company utilizes an accelerated amortization methodology for customer and scrap generator relationships in order to follow the pattern in which the economic benefits of the amounts are anticipated to be consumed. Finite-lived trademarks are amortized using a straight line methodology. Amortization of intangible assets was $38.3 million, $44.3 million, and $52.4 million for the years ended December 31, 2011, 2010, and 2009, respectively. Estimated amortization expense, related to amortizable intangibles, for the years ending December 31 is as follows (in thousands):

2012	$	34,258
2013		30,476
2014		26,090
2015		23,390
2016		20,902
Thereafter		125,977
Total	$	261,093

Impairment of Long-Lived Tangible and Finite-Lived Intangible Assets

Impairment of Long-Lived Tangible and Finite-Lived Intangible Assets

        The company reviews long-lived assets for impairment whenever events or changes in circumstances indicate the carrying amount of such assets may not be recoverable. Impairment losses are recorded on long-lived assets used in operations when indicators of impairment are present and the undiscounted cash flows estimated to be generated by those assets are less than the assets' carrying amounts. The impairment loss is measured by comparing the fair value of the asset to its carrying amount. We consider various factors and determine whether an impairment test is necessary, including by way of examples, a significant and prolonged deterioration in operating results and projected cash flows, significant changes in the extent or manner in which an asset is used, technological advances with respect to assets which would potentially render them obsolete, our strategy and capital planning, and the economic climate in markets to be served.

        After the purchase of additional fabrication assets in the fourth quarter of 2010 and determining the future use of existing fabrication facilities, the company determined that the carrying value of certain fixed assets at its idled South Carolina fabrication facility exceeded their fair value as determined utilizing market and cost approaches. The resulting impairment charge of $12.8 million was recorded within the steel fabrication reporting segment in 2010.

Goodwill

Goodwill

        The company's goodwill is allocated to the following reporting units at December 31, (in thousands):

	2011		2010
OmniSource—Metals Recycling/Ferrous Resources Segment	$	571,317	$	577,926
The Techs—Steel Segment		142,783		142,783
Roanoke Bar Division—Steel Segment		29,041		29,041
New Millennium Building Systems—Steel Fabrication Segment		1,925		1,925
	$	745,066	$	751,675

        OmniSource goodwill decreased $6.6 million from December 31, 2010 to December 31, 2011 in recognition of the 2011 tax benefit related to the amortization of the component of OmniSource tax-deductible goodwill in excess of book goodwill.

Impairment of Goodwill and Indefinite-Lived Intangible Assets

Impairment of Goodwill and Indefinite-Lived Intangible Assets

        At least once annually or when indicators of impairment exist, the company performs an impairment test for goodwill and other indefinite-lived intangible assets. Goodwill is allocated to various reporting units, which are generally one level below the company's operating segments. The company utilizes a two-stepped approach to measuring goodwill impairment. The first step of the test determines if there is potential goodwill impairment. In this step the company compares the fair value of the reporting unit to its carrying amount (which includes goodwill). The fair value of the reporting unit is determined by using an estimate of future cash flows utilizing a risk-adjusted discount rate to calculate the net present value of future cash flows, and assessing its reasonableness by using a market approach based upon an analysis of valuation metrics of comparable peer companies. If the carrying amount exceeds the fair value, the company performs the second step of the test, which measures the amount of impairment loss to be recorded, if any. In the second step, the company compares the carrying amount of the goodwill to the implied fair value of the goodwill based on the net fair value of the recognized and unrecognized assets and liabilities of the reporting unit. If the implied fair value is less than the carrying value, an impairment loss is recorded to the extent that the fair value of the goodwill is less than its carrying value.

        The company tests indefinite-lived intangible assets for impairment through the comparison of the fair value of the specific intangible asset with its carrying amount. The fair value of the intangible asset is determined by using an estimate of future cash flows attributable to the asset and a risk-adjusted discount rate to compute a net present value of future cash flows. If the fair value is less than the carrying value, an impairment loss is recorded in an amount equal to the excess in carrying value.

Equity Based Compensation

Equity-Based Compensation

        The company has several stock-based employee compensation plans which are more fully described in Note 5. Compensation expense for stock options is recorded over the vesting period using the fair value on the grant date, as calculated using the Black-Scholes model. Compensation expense for stock-based employee compensation plans, including stock options, was $14.8 million, $12.5 million, and $13.2 million for the years ended December 31, 2011, 2010, and 2009, respectively.

Income Taxes

Income Taxes

        The company accounts for income taxes and the related accounts under the liability method. Deferred tax liabilities and assets are determined based on the difference between the financial statement and tax bases of assets and liabilities using enacted rates expected to be in effect during the year in which the basis differences reverse.

Earnings (Loss) Per Share

Earnings (Loss) Per Share

        Basic earnings (loss) per share is based on the weighted average shares of common stock outstanding during the period. Diluted earnings per share assumes the weighted average dilutive effect of common share equivalents outstanding during the period applied to the company's basic earnings per share. Common share equivalents represent potentially dilutive stock options and dilutive shares related to the company's convertible subordinated debt and are excluded from the computation in periods in which they have an anti-dilutive effect. Options to purchase 4.0 million shares, 3.1 million shares, and 2.1 million shares were anti-dilutive at December 31, 2011, 2010 and 2009, respectively. Due to the company's net loss for the year ended December 31, 2009, the computation of diluted net loss per share did not include the after-tax equivalent of interest of $5.0 million for the company's 5.125% senior convertible notes, due 2014 and the related weighted average equivalent of 8.4 million shares.

        The following table presents a reconciliation of the numerators and the denominators of the company's basic and diluted earnings (losses) per share computations for the years ended December 31 (in thousands, except per share data):

	2011						2010
	Net Income (Numerator)		Shares (Denominator)		Per Share Amount		Net Income (Numerator)		Shares (Denominator)		Per Share Amount
Basic earnings per share	$	278,120		218,471	$	1.27	$	140,709		216,760	$	.65
Dilutive stock options		—		1,139				—		1,575
5.125% convertible senior notes		9,432		16,382				9,508		16,382
Diluted earnings per share	$	287,552		235,992	$	1.22	$	150,217		234,717	$	.64

	2009
	Net Loss (Numerator)			Shares (Denominator)		Per Share Amount
Basic loss per share	$	(8,184	)		200,704	$	(.04	)
Dilutive stock options		—			—
4.0% convertible subordinated notes		—			—
Diluted loss per share	$	(8,184	)		200,704	$	(.04	)

Concentration of Credit Risk

Concentration of Credit Risk

        Financial instruments that potentially subject the company to significant concentrations of credit risk principally consist of temporary cash investments, short-term commercial paper, and accounts receivable. The company places its temporary cash and short-term commercial paper investments with high credit quality financial institutions and companies, and limits the amount of credit exposure from any one entity. The company is exposed to credit risk in the event of nonpayment by customers. The company mitigates its exposure to credit risk, which it generally extends initially on an unsecured basis, by performing ongoing credit evaluations and taking further action if necessary, such as requiring letters of credit or other security interests to support the customer receivable. Management's estimation of the allowance for doubtful accounts is based upon known credit risks, historical loss experience and current economic conditions affecting the company's customers. Customer accounts receivable are charged off when all collection efforts have been exhausted and the amounts are deemed uncollectible. Heidtman Steel Products (Heidtman), a related party, accounted for 5% of the company's net accounts receivable at December 31, 2011 and 2010.

Derivative Financial Instruments

Derivative Financial Instruments

        The company recognizes all derivatives as either assets or liabilities in the consolidated balance sheets and measures those instruments at fair value. Derivatives that are not designated as hedges must be adjusted to fair value through income. Changes in the fair value of derivatives that are designated as hedges, depending on the nature of the hedge, are recognized as either an offset against the change in fair value of the hedged balance sheet item in the case of fair value hedges or as other comprehensive income in the case of cash flow hedges, until the hedged item is recognized in earnings. The ineffective portion of a derivative's change in fair value is immediately recognized in earnings as other income or expense.

        In the normal course of business, the company may have involvement with derivative financial instruments related to managing fluctuations in interest rates, foreign exchange rates, and forward contracts in various commodities. The company periodically employs interest rate swap and forward-rate agreements, and foreign currency exchange contracts as necessary. At the time of acquiring financial instruments, the company designates and assigns these instruments as hedges of specific assets, liabilities or anticipated transactions. When hedged assets or liabilities are sold or extinguished, or the anticipated transaction being hedged is no longer expected to occur, the company recognizes the gain or loss on the designated hedged financial instrument. The company routinely enters into forward contracts in various commodities, primarily nonferrous metals in our Metals Recycling and Ferrous Resources operations, to reduce exposure to commodity related price fluctuations. These forward contracts do not meet hedging criteria and accordingly, the company recognizes the change in fair value related to these forward contracts in costs of goods sold. The company does not enter into derivative financial instruments for speculative purposes.

XML

Description of the Business and Summary of Significant Accounting Policies (Details 2) (USD $)	12 Months Ended
	Dec. 31, 2011 month	Dec. 31, 2010	Dec. 31, 2009
Cash and Cash Equivalents
Maximum term of original maturity to classify instruments as cash and cash equivalents (in months)	3
Inventories
Raw materials	$ 609,150,000	$ 589,859,000
Supplies	251,716,000	231,816,000
Work in progress	106,609,000	94,346,000
Finished goods	232,109,000	198,042,000
Total inventories	1,199,584,000	1,114,063,000
Investments
Ownership percentage cost method, maximum	20.00%
Investments	24,900,000	27,100,000
Property, plant and equipment
Property, plant and equipment	3,551,561,000	3,406,626,000
Less accumulated depreciation	1,357,816,000	1,193,293,000
Property, plant and equipment, net	2,193,745,000	2,213,333,000
Depreciation expense	176,500,000	171,700,000	158,900,000
Maximum
Property, plant and equipment
Ownership percentage of equity method investment	50.00%
Minimum
Property, plant and equipment
Ownership percentage of equity method investment	49.00%
Land and improvements
Property, plant and equipment
Property, plant and equipment	271,208,000	257,756,000
Buildings and improvements
Property, plant and equipment
Property, plant and equipment useful life minimum (in years)	10
Property, plant and equipment useful life maximum (in years)	40
Property, plant and equipment	496,976,000	480,434,000
Plant, machinery and equipment
Property, plant and equipment
Property, plant and equipment useful life minimum (in years)	3
Property, plant and equipment useful life maximum (in years)	15
Property, plant and equipment	2,656,358,000	2,571,850,000
Construction in progress
Property, plant and equipment
Property, plant and equipment	$ 127,019,000	$ 96,586,000

XML

Long-Term Debt (Tables)

12 Months Ended

Dec. 31, 2011

Long-Term Debt

Schedule of long-term debt

	2011		2010
73/8% senior notes, due 2012	$	700,000	$	700,000
5.125% convertible senior notes, due 2014		287,500		287,500
63/4% senior notes, due 2015		500,000		500,000
73/4% senior notes, due 2016		500,000		500,000
75/8% senior notes, due 2020		350,000		350,000
Other secured obligations		42,600		49,321
Total debt		2,380,100		2,386,821
Less current maturities		444,078		8,924
Long-term debt	$	1,936,022	$	2,377,897

Schedule of outstanding debt maturities

2012	$	444,078
2013		16,770
2014		318,111
2015		544,421
2016		682,461
Thereafter		374,259
	$	2,380,100

XML

CONSOLIDATED STATEMENTS OF CASH FLOWS (USD $) In Thousands, unless otherwise specified	12 Months Ended
	Dec. 31, 2011	Dec. 31, 2010	Dec. 31, 2009
Operating activities:
Net income (loss)	$ 265,692	$ 129,599	$ (11,019)
Adjustments to reconcile net income (loss) to net cash provided by operating activities:
Depreciation and amortization	222,607	224,698	221,426
Impairment charges		12,805
Equity-based compensation	17,283	14,688	17,589
Deferred income taxes	34,436	46,097	92,596
(Gain) loss on disposal of property, plant and equipment	(3,925)	1,215	839
Changes in certain assets and liabilities:
Accounts receivable	(100,602)	(196,556)	72,159
Inventories	(85,523)	(261,110)	175,183
Other assets	5,683	(15,335)	4,076
Accounts payable	56,551	71,169	(8,860)
Income taxes receivable/payable	26,242	99,276	1,611
Accrued expenses	47,911	42,761	(120,044)
Net cash provided by operating activities	486,355	169,307	445,556
Investing activities:
Purchases of property, plant and equipment	(167,007)	(133,394)	(330,052)
Investments in short-term commercial paper	(84,830)
Investment in direct financing lease			(27,967)
Other investing activities	16,000	(15,684)	(15,926)
Net cash used in investing activities	(235,837)	(149,078)	(373,945)
Financing activities:
Issuance of current and long-term debt	10,103	556,553	1,268,435
Repayments of current and long-term debt	(7,740)	(346,963)	(1,690,557)
Issuance of common stock (net of expenses) and proceeds from exercise of stock options, including related tax effect	13,396	14,014	420,930
Contributions from noncontrolling investors	27,389	5,348	5,000
Distributions to noncontrolling investor	(567)
Dividends paid	(81,882)	(64,969)	(68,672)
Debt issuance costs	(6,969)	(6,707)	(13,972)
Net cash provided by (used in) financing activities	(46,270)	157,276	(78,836)
Increase (decrease) in cash and equivalents	204,248	177,505	(7,225)
Cash and equivalents at beginning of year	186,513	9,008	16,233
Cash and equivalents at end of year	$ 390,761	$ 186,513	$ 9,008

XML

CONSOLIDATED BALANCE SHEETS (Parenthetical) (USD $) In Thousands, except Share data, unless otherwise specified	Dec. 31, 2011	Dec. 31, 2010
Accounts receivable, related allowances (in dollars)	$ 18,303	$ 19,936
Intangible assets, accumulated amortization (in dollars)	$ 181,227	$ 142,880
Common stock voting, par value (in dollars per share)	$ 0.0025	$ 0.0025
Common stock voting, shares authorized (in shares)	900,000,000	900,000,000
Common stock voting, shares issued (in shares)	255,052,811	254,002,799
Common stock voting, shares outstanding (in shares)	218,873,720	217,574,826
Treasury stock, shares (in shares)	36,179,091	36,427,973

XML

Retirement Plans

12 Months Ended

Dec. 31, 2011

Retirement Plans

Retirement Plans

Note 10. Retirement Plans

        The company sponsors several 401(k) retirement savings and profit sharing plans for eligible employees, which are considered "qualified plans" for federal income tax purposes. The company's total expense for the plans was $37.2 million, $22.9 million, and $5.3 million for the years ended December 31, 2011, 2010, and 2009, respectively. The company's profit sharing component consists of 2% of consolidated pretax earnings plus a unique percentage of each of the company's operating segments' pretax earnings after allocation of certain corporate expenses. The resulting total profit sharing component was $35.1 million, $21.1 million, and $2.2 million for the years ended December 31, 2011, 2010, and 2009, respectively, of which 50% each year was contributed to the Plans, at the discretion of the company, and the other 50% was paid directly to the Plans' participants.

XML

Document and Entity Information (USD $)	12 Months Ended
	Dec. 31, 2011	Feb. 17, 2012	Jun. 30, 2011
Document and Entity Information [Abstract]
Entity Registrant Name	STEEL DYNAMICS INC
Entity Central Index Key	0001022671
Document Type	10-K
Document Period End Date	Dec. 31, 2011
Amendment Flag	false
Current Fiscal Year End Date	--12-31
Entity Well-known Seasoned Issuer	Yes
Entity Voluntary Filers	No
Entity Current Reporting Status	Yes
Entity Filer Category	Large Accelerated Filer
Entity Public Float			$ 2,813,856,175
Entity Common Stock, Shares Outstanding		219,035,240
Document Fiscal Year Focus	2011
Document Fiscal Period Focus	FY

XML

Leases

12 Months Ended

Dec. 31, 2011

Leases

Leases

Note 11. Leases

        The company has operating leases principally relating to transportation equipment, real estate, and office equipment. Certain leases include escalation clauses, and/or purchase options. The company paid $16.8 million, $15.4 million, and $15.3 million for operating leases for the years ended December 31, 2011, 2010, and 2009, respectively. At December 31, 2011, future minimum payments for all non-cancelable operating leases with an initial or remaining term of one year or more are as follows (in thousands):

2012	$	11,874
2013		9,000
2014		6,507
2015		4,609
2016		3,870
Thereafter		5,506
	$	41,366

XML

CONSOLIDATED STATEMENTS OF OPERATIONS (USD $) In Thousands, except Per Share data, unless otherwise specified	12 Months Ended
	Dec. 31, 2011	Dec. 31, 2010	Dec. 31, 2009
Net sales
Unrelated parties	$ 7,718,714	$ 6,060,933	$ 3,810,378
Related parties	278,786	239,954	148,428
Total net sales	7,997,500	6,300,887	3,958,806
Costs of goods sold	7,065,982	5,625,221	3,559,730
Gross profit	931,518	675,666	399,076
Selling, general and administrative expenses	263,595	227,046	223,013
Profit sharing	43,149	25,476	2,980
Amortization of intangible assets	39,954	45,586	53,552
Impairment charges		12,805
Operating income	584,820	364,753	119,531
Interest expense, net of capitalized interest	176,977	170,229	141,360
Other income, net	(16,476)	(18,935)	(3,592)
Income (loss) before income taxes	424,319	213,459	(18,237)
Income taxes (benefit)	158,627	83,860	(7,218)
Net income (loss)	265,692	129,599	(11,019)
Net loss attributable to noncontrolling interests	12,428	11,110	2,835
Net income (loss) attributable to Steel Dynamics, Inc.	$ 278,120	$ 140,709	$ (8,184)
Basic earnings (loss) per share attributable to Steel Dynamics, Inc. stockholders (in dollars per share)	$ 1.27	$ 0.65	$ (0.04)
Weighted average common shares outstanding (in shares)	218,471	216,760	200,704
Diluted earnings (loss) per share attributable to Steel Dynamics, Inc. stockholders, including the effect of assumed conversions when dilutive (in dollars per share)	$ 1.22	$ 0.64	$ (0.04)
Weighted average common shares and share equivalents outstanding (in shares)	235,992	234,717	200,704
Dividends declared per share (in dollars per share)	$ 0.400	$ 0.300	$ 0.325

XML

Equity-based Incentive Plans

12 Months Ended

Dec. 31, 2011

Equity-based Incentive Plans

Equity-based Incentive Plans

Note 5. Equity-based Incentive Plans

2006 Equity Incentive Plan (2006 Plan)

        The company's stockholders approved the 2006 Plan at the company's annual meeting of stockholders held May 18, 2006. The company reserved 16.0 million shares of common stock for issuance upon exercise of options or other equity grants under the 2006 Plan. At December 31, 2011, there were 1.0 million shares still available for issuance. The 2006 Plan was designed to attract, motivate and retain qualified persons that are able to make important contributions to the company's success. To accomplish these objectives, the 2006 Plan provides for awards of equity-based incentives through option grants, restricted stock awards, unrestricted stock awards, stock appreciation rights, performance awards, and deferred stock units. Pursuant to the 2006 Plan, the company awarded 42,000 deferred stock units in 2011; issued 249,000 shares, 43,300 shares, and 157,000 shares of restricted stock during 2011, 2010, and 2009, respectively, and granted 2.7 million, 2.5 million and 1.6 million options during 2011, 2010, and 2009, respectively. No other equity-based incentives were issued pursuant to the 2006 Plan during the three year period ended December 31, 2011.

        The company satisfies stock options with newly issued shares, and satisfies restricted stock awards, and deferred stock units with treasury shares. Substantially all of the company's employees are eligible for the stock option element of the 2006 Plan, pursuant to which the options vest 100% six months after the date of grant, with a maximum term of five years. Options are granted each May and November at an exercise price of 100% of the fair market value of the company's common stock on the date of grant.

        The estimated weighted-average fair value of the individual options granted on the date of grant was $5.36, $5.81, and $5.14 during 2011, 2010, and 2009, respectively. The aggregate intrinsic value of options exercised was $7.4 million, $11.6 million, and $26.2 million for the years ended December 31, 2011, 2010, and 2009, respectively. The aggregate intrinsic value of options which were exercisable as of December 31, 2011 was $12.1 million. The aggregate intrinsic value of options that are currently outstanding and that are expected to be exercised is $ 13.1 million. Total unrecognized stock option compensation expense, which will be recognized through May 2012, is $5.7 million at December 31, 2011. The disclosures related to the effect of equity-based compensation expense for the year ended December 31, 2011, 2010, and 2009, are based on the fair value of stock option awards estimated on the date of grant using the Black-Scholes option valuation model with the following assumptions:

	2011			2010			2009
Volatility(1)		65.1 - 66.3	%		66.4 - 67.0	%		67.2 - 67.4	%
Risk-free interest rate(2)		0.4 - 1.4	%		0.8 - 2.0	%		2.1 - 2.2	%
Dividend yield(3)		2.3 - 2.5	%		2.0 - 2.2	%		1.7 - 2.0	%
Expected life (years)(4)		2.8 - 4.1			2.8 - 4.1			2.2 - 3.9

(1)

The volatility is based on the historical volatility of the company's stock.

(2)

The risk-free interest rate is based on the U.S. Treasury strip rate for the expected life of the option.

(3)

The expected dividend yield is based on the company's latest annualized dividend rate and recent historical market prices of the underlying common stock at the date of grant.

(4)

The expected life in years is determined primarily from historical stock option exercise data.

        Dividends are not paid to holders of unexercised options. The company's stock option activity is as follows:

	Options			Weighted Average Exercise Price		Weighted Average Fair Value
Outstanding options as of January 1, 2009		7,986,681		$	10.86	$	3.40
Granted		1,637,107			15.04		5.14
Exercised		(2,807,898	)		5.81		2.57
Forfeited		(326,519	)		15.83		5.92
As of December 31, 2009		6,489,371			13.69		5.09
Granted		2,545,932			14.73		5.81
Exercised		(1,414,153	)		8.11		2.89
Forfeited		(214,757	)		20.35		6.33
As of December 31, 2010		7,406,393			14.91		5.14
Granted		2,742,904			14.34		5.36
Exercised		(1,047,297	)		11.37		4.28
Forfeited		(499,718	)		16.61		6.15
As of December 31, 2011		8,602,282			15.06		5.25

        The following table summarizes certain information concerning the company's outstanding options as of December 31, 2011.

Range of Exercise Price	Outstanding Options		Weighted Average Remaining Contractual Life (Years)		Weighted Average Exercise Price Outstanding Options		Exercisable Options		Weighted Average Exercise Price Exercisable Options
$0 to $10		1,530,294		1.9	$	5.23		1,530,294	$	5.23
$10 to $15		3,094,843		4.0		13.13		1,498,555		13.76
$15 to $20		2,781,396		3.9		16.39		2,781,396		16.39
$20 to $30		741,037		0.7		24.50		741,037		24.50
$30 to $40		454,712		1.4		37.84		454,712		37.84

2008 Executive Incentive Compensation Plan (Executive Plan)

        Pursuant to the company's Executive Plan, certain officers and other senior management members of the company are eligible to receive cash bonuses based on predetermined formulas. In the event the cash portion of the bonus exceeds the predetermined maximum cash payout, the excess bonus is distributed as common stock of the company, which vests over a three-year period. A total of 2.5 million shares have been reserved under this plan, which was amended, and approved by stockholders, during 2008. At December 31, 2011, 1.9 million shares under the Executive Plan remained available for issuance. Pursuant to the Executive Plan, shares were awarded with a market value of approximately $4.0 million for the award year 2011 and $208,000 for the award year 2010. No shares were awarded for the award year 2009.

2004 Employee Stock Purchase Plan

        The 2004 Employee Stock Purchase Plan allows eligible employees, at their election, to purchase shares of the company's stock on the open market at fair market value with a designated broker through payroll deductions. The maximum allowable payroll deduction for the plan, excluding company matching contributions, is $10,400 in any calendar year. The company provides matching contributions of 10% of employees' payroll deductions. The company's total expense for the plan was $328,000, $299,000, and $304,000 for the years ended December 31, 2011, 2010, and 2009, respectively.

XML

Shareholders' Equity

12 Months Ended

Dec. 31, 2011

Shareholders' Equity

Shareholders' Equity

Note 4. Shareholders' Equity

Common Stock Issuance

        In June 2009 the company completed a public offering of 31,050,000 shares of its common stock at a public offering price of $13.50 per share. Net proceeds of the offering along with the concurrent issuance of the company's 5.125% convertible senior notes due 2014 was approximately $678.8 million, after deducting underwriting discounts, commissions and other offering expenses. The net proceeds from this offering were used to repay the company's then outstanding Term A loan of $552.0 million and for general corporate purposes, including the repayment of then outstanding borrowings on the company's senior secured revolver.

Cash Dividends

        The company declared cash dividends of $87.5 million, or $.400 per common share, during 2011; $65.1 million, or $.300 per common share, during 2010; and $66.7 million, or $.325 per common share, during 2009. The company paid cash dividends of $81.9 million, $65.0 million and $68.7 million during 2011, 2010 and 2009, respectively.

Treasury Stock

        The company's board of directors has authorized the company to repurchase shares of the company's common stock through open market trades. The company did not repurchase any shares during 2011, 2010 or 2009. As of December 31, 2011, the company had remaining authorization to repurchase approximately 3.6 million additional shares. The repurchase program does not have an expiration date.

XML

Description of the Business and Summary of Significant Accounting Policies (Tables)

12 Months Ended

Dec. 31, 2011

Description of the Business and Summary of Significant Accounting Policies

Schedule of inventories

Inventories are stated at lower of cost or market. Cost is determined principally on a first-in, first-out, basis. Inventory consisted of the following at December 31 (in thousands):

	2011		2010
Raw materials	$	609,150	$	589,859
Supplies		251,716		231,816
Work in progress		106,609		94,346
Finished goods		232,109		198,042
	$	1,199,584	$	1,114,063

Schedule of property, plant and equipment

	2011		2010
Land and improvements	$	271,208	$	257,756
Buildings and improvements		496,976		480,434
Plant, machinery and equipment		2,656,358		2,571,850
Construction in progress		127,019		96,586
		3,551,561		3,406,626
Less accumulated depreciation		1,357,816		1,193,293
Property, plant and equipment, net	$	2,193,745	$	2,213,333

Schedule of intangible assets

	2011		2010		Useful Life	Weighted Average Amortization Period
Customer and scrap generator relationships	$	408,400	$	408,400	10 to 25 years		20 years
Trademarks		189,800		189,800	Indefinite		—
Trademarks		19,700		19,700	4 to 12 years		12 years
Other		14,220		14,220	3 months to 6 years		5 years
		632,120		632,120			19 years
Less accumulated amortization		181,227		142,880
	$	450,893	$	489,240

Schedule of estimated amortization expense, related to amortizable intangibles

2012	$	34,258
2013		30,476
2014		26,090
2015		23,390
2016		20,902
Thereafter		125,977
Total	$	261,093

Schedule of allocation of goodwill to reporting units

	2011		2010
OmniSource—Metals Recycling/Ferrous Resources Segment	$	571,317	$	577,926
The Techs—Steel Segment		142,783		142,783
Roanoke Bar Division—Steel Segment		29,041		29,041
New Millennium Building Systems—Steel Fabrication Segment		1,925		1,925
	$	745,066	$	751,675

Reconciliation of the numerators and the denominators of the company's basic and diluted earnings (losses) per share computations

	2011						2010
	Net Income (Numerator)		Shares (Denominator)		Per Share Amount		Net Income (Numerator)		Shares (Denominator)		Per Share Amount
Basic earnings per share	$	278,120		218,471	$	1.27	$	140,709		216,760	$	.65
Dilutive stock options		—		1,139				—		1,575
5.125% convertible senior notes		9,432		16,382				9,508		16,382
Diluted earnings per share	$	287,552		235,992	$	1.22	$	150,217		234,717	$	.64

	2009
	Net Loss (Numerator)			Shares (Denominator)		Per Share Amount
Basic loss per share	$	(8,184	)		200,704	$	(.04	)
Dilutive stock options		—			—
4.0% convertible subordinated notes		—			—
Diluted loss per share	$	(8,184	)		200,704	$	(.04	)

XML

Segment Information

12 Months Ended

Dec. 31, 2011

Segment Information

Segment Information

Note 12. Segment Information

        The company has three reportable segments: steel operations, metals recycling and ferrous resources operations, and steel fabrication operations. These operations are described in Note 1 to the financial statements. Revenues included in the category "Other" are from subsidiary operations that are below the quantitative thresholds required for reportable segments and primarily consist of further processing, slitting, and sale of certain steel products and the resale of certain secondary and excess steel products. In addition, "Other" also includes certain unallocated corporate accounts, such as the company's senior secured credit facility, senior notes, convertible senior notes, certain other investments and certain profit sharing expenses.

        The company's operations are primarily organized and managed by operating segment. Operating segment performance and resource allocations are primarily based on operating results before income taxes. The accounting policies of the reportable segments are consistent with those described in Note 1 to the financial statements. Intra-segment sales and any related profits are eliminated in consolidation.

        The company's segment results for the years ended December 31, are as follows (in thousands):

For the Year Ended December 31, 2011	Steel Operations		Metals Recycling / Ferrous Resources			Steel Fabrication Operations			Other			Eliminations			Consolidated
Net Sales
External	$	4,676,898	$	2,473,511		$	275,783		$	92,856		$	—		$	7,519,048
External Non-U.S.		182,319		295,552			—			581			—			478,452
Other segments		211,089		1,383,505			625			11,711			(1,606,930	)		—
		5,070,306		4,152,568			276,408			105,148			(1,606,930	)		7,997,500
Operating income (loss)		658,120		26,597			(6,584	)		(95,141)	(1)		1,828	(2)		584,820
Income (loss) before income taxes		574,108		(16,706	)		(13,573	)		(121,233	)		1,723			424,319
Depreciation and amortization		108,477		101,893			6,751			5,690			(204	)		222,607
Capital expenditures		43,998		103,142			2,205			17,662			—			167,007
As of December 31, 2011
Assets		2,598,767		2,561,722			227,663			789,322	(3)		(198,248)	(4)		5,979,226
Liabilities		495,425		528,629			13,768			2,759,894	(5)		(189,084)	(6)		3,608,632

Footnotes related to the twelve months ended December 31, 2011 segment results (in millions):

(1)	Corporate SG&A	$	(46.7	)	(2)	Gross profit increase from intra-company sales	$	1.8
	Company-wide stock option expense		(14.8	)
	Profit sharing		(35.1	)
	Other, net		1.5
		$	(95.1	)
(3)	Cash and equivalents	$	314.9		(4)	Elimination of intra-company receivables	$	(36.1	)
	Investments in short-term commercial paper		84.8			Elimination of intra-company debt		(152.8	)
	Income taxes receivable		16.7			Other		(9.3	)
	Deferred income taxes		25.3				$	(198.2	)
	Property, plant and equipment, net		85.7
	Debt issuance costs		23.9
	Intra-company debt		152.8
	Other		85.2
		$	789.3
(5)	Accounts payable	$	28.7		(6)	Elimination of intra-company payables	$	(36.1	)
	Income taxes payable		11.1			Elimination of intra-company debt		(152.8	)
	Accrued interest		33.7			Other		(0.2	)
	Accrued profit sharing		35.8				$	(189.1	)
	Debt		2,341.9
	Deferred income taxes		217.6
	Other		91.1
		$	2,759.9

For the Year Ended December 31, 2010	Steel Operations		Metals Recycling / Ferrous Resources			Steel Fabrication Operations			Other			Eliminations			Consolidated
Net Sales
External	$	3,726,869	$	1,966,518		$	177,055		$	77,742		$	—		$	5,948,184
External Non-U.S.		103,061		248,870			—			772			—			352,703
Other segments		169,709		963,644			323			9,841			(1,143,517	)		—
		3,999,639		3,179,032			177,378			88,355			(1,143,517	)		6,300,887
Operating income (loss)		439,795		19,686			(25,056	)		(66,189	)(1)		(3,483	)(2)		364,753
Income (loss) before income taxes		363,352		(26,988	)		(30,539	)		(88,007	)		(4,359	)		213,459
Depreciation and amortization		112,471		102,027			5,894			4,493			(187	)		224,698
Capital expenditures		51,695		55,982			492			28,857			(3,632	)		133,394
As of December 31, 2010
Assets(7)		2,551,885		2,464,835			206,810			562,961	(3)		(196,557	)(4)		5,589,934
Liabilities(7)		422,764		444,170			18,361			2,746,798	(5)		(173,289	)(6)		3,458,804

Footnotes related to the twelve months ended December 31, 2010 segment results (in millions):

(1)	Corporate SG&A	$	(31.6	)	(2)	Gross profit reduction from intra-company sales	$	(3.5	)
	Company-wide stock option expense		(12.5	)
	Profit sharing		(21.1	)
	Other, net		(1.0	)
		$	(66.2	)
(3)	Cash and equivalents	$	175.3		(4)	Elimination of intra-company receivables	$	(36.0	)
	Income taxes receivable		37.3			Elimination of intra-company debt		(134.8	)
	Deferred income taxes		20.7			Other		(25.8	)
	Property, plant and equipment, net		70.7				$	(196.6	)
	Debt issuance costs		23.3
	Intra-company debt		134.8
	Other		100.9
		$	563.0
(5)	Accounts payable	$	32.5		(6)	Elimination of intra-company payables	$	(36.0	)
	Income taxes payable		5.2			Elimination of intra-company debt		(134.8	)
	Accrued interest		33.7			Other		(2.5	)
	Accrued profit sharing		21.5				$	(173.3	)
	Debt		2,341.0
	Deferred income taxes		242.7
	Other		70.2
		$	2,746.8

(7)

Certain segment deferred tax asset and liability accounts have been reclassified at December 31, 2010, to conform to the December 31, 2011 presentation. These reclassifications had no impact to the previously reported segment income statement information or consolidated income statements as previously reported, nor did they impact previously reported consolidated total assets or liabilities.

For the Year Ended December 31, 2009	Steel Operations		Metals Recycling / Ferrous Resources			Steel Fabrication Operations			Other			Eliminations			Consolidated
Net Sales
External	$	2,443,709	$	1,121,803		$	156,499		$	50,937		$	—		$	3,772,948
External Non-U.S.		67,394		118,351			—			113			—			185,858
Other segments		95,866		441,979			1,509			5,796			(545,150	)		—
		2,606,969		1,682,133			158,008			56,846			(545,150	)		3,958,806
Operating income (loss)		196,225		(4,709	)		(6,356	)		(45,356	)(1)		(20,273	)(2)		119,531
Income (loss) before income taxes		127,701		(42,360	)		(11,861	)		(68,793	)		(22,924	)		(18,237	)
Depreciation and amortization		104,184		105,627			6,060			5,555			—			221,426
Capital expenditures		68,968		251,695			(473	)		12,443			(2,581	)		330,052
As of December 31, 2009
Assets(7)		2,373,700		2,318,827			169,416			469,389	(3)		(201,460	)(4)		5,129,872
Liabilities(7)		330,949		453,225			25,208			2,514,423	(5)		(197,198	)(6)		3,126,607

Footnotes related to the twelve months ended December 31, 2009 segment results (in millions):

(1)	Corporate SG&A	$	(26.5	)	(2)	Gross profit reduction from intra-company sales	$	(20.3	)
	Company-wide stock option expense		(13.2	)
	Profit Sharing		(2.2	)
	Other, net		(3.5	)
		$	(45.4	)
(3)	Income taxes receivable	$	137.0		(4)	Elimination of intra-company receivables	$	(27.0	)
	Deferred income taxes		21.5			Elimination of intra-company debt		(174.9	)
	Property, plant and equipments, net		44.5			Other		0.4
	Debt issuance costs		24.0				$	(201.5	)
	Intra-company debt receivable		174.9
	Other		67.5
		$	469.4
(5)	Accounts payable	$	37.8		(6)	Elimination of intra-company payables	$	(27.0	)
	Income taxes payable		5.7			Elimination of intra-company debt		(174.9	)
	Accrued interest		27.3			Other		4.7
	Accrued profit sharing		2.3				$	(197.2	)
	Debt		2,158.2
	Deferred income taxes		220.9
	Other		62.2
		$	2,514.4

(7)

Certain segment deferred tax asset and liability accounts have been reclassified at December 31, 2009, to conform to the December 31, 2011 presentation. These reclassifications had no impact to the previously reported segment income statement information or consolidated income statements as previously reported, nor did they impact previously reported consolidated total assets or liabilities.

XML

Commitments and Contingencies

12 Months Ended

Dec. 31, 2011

Commitments and Contingencies

Commitments and Contingencies

Note 8. Commitments and Contingencies

        The company has entered into certain commitments with suppliers which are of a customary nature. Commitments have been entered into relating to future expected requirements for such commodities as fuel, zinc, iron concentrate, electricity, natural gas, and natural gas transportation services. Certain commitments contain provisions which require that the company "take or pay" for specified quantities at fixed prices; or in the case of iron concentrate, at market prices; without regard to actual usage for periods of up to 24 months for physical commodity requirements and for up to 9 years for commodity transportation requirements.

        The company's commitments for these agreements with "take or pay" or other similar commitment provisions for the years ending December 31, as follows (in thousands):

2012	$	122,705
2013		10,237
2014		1,737
2015		1,561
2016		1,561
Thereafter		5,197
	$	142,998

        The company utilized such "take or pay" requirements during the past three years under these contracts. The company believes that production requirements will be such that consumption of the products or services purchased under these commitments will occur in the normal production process. The company purchases its electricity consumed at its Flat Roll Division pursuant to a contract which extends through December 2012, and designates 160 hours annually as "interruptible service." The contract also establishes an agreed fixed-rate energy charge per Mill/kWh consumed for each year through the expiration of the agreement.

        At December 31, 2011, the company has outstanding commitments of $32.8 million related to ongoing construction of property, plant, and equipment related primarily to steel operations, and metals recycling and ferrous resources operations. The company's commitments for operating leases are discussed in Note 11.

        We are involved in various routine litigation matters, including administrative proceedings, regulatory proceedings, governmental investigations, environmental matters, and commercial and construction contract disputes.

        We are also involved, along with eight other steel manufacturing companies, in a class action antitrust complaint filed in federal court in Chicago, Illinois that alleges a conspiracy to fix, raise, maintain and stabilize the price at which steel products were sold in the United States starting in 2005, by artificially restricting the supply of such steel products. All but one of the Complaints purport to be brought on behalf of a class consisting of all direct purchasers of steel products between January 1, 2005, and the present. The other Complaint purports to be brought on behalf of a class consisting of all indirect purchasers of steel products within the same time period. In addition, on December 28, 2010, we and the other co-defendants were served with a substantially similar complaint in the Circuit Court of Cocke County, Tennessee, purporting to be on behalf of indirect purchasers of steel products in Tennessee. The case has been removed to federal court. All Complaints seek treble damages and costs, including reasonable attorney fees, pre- and post-judgment interest and injunctive relief. On January 2, 2009, Steel Dynamics and the other defendants filed a Joint Motion to Dismiss all of the direct purchaser lawsuits. On June 12, 2009, however, the Court denied the Motion. The parties are currently conducting discovery related primarily to class certification matters. Due to the uncertain nature of litigation, we cannot presently determine the ultimate outcome of this litigation, however we have determined, based on the information available at this time, that there is not presently a "reasonable possibility" (as that term is defined in ASC 450-20-20), that the outcome of these legal proceedings would have a material impact on our financial condition, results of operations, or liquidity.

        Although not presently necessary or appropriate to make a dollar estimate of exposure to loss, if any, in connection with the above matter, we may in the future determine that a loss accrual is necessary. Although we may make loss accruals, if and as warranted, any amounts that we may accrue from time to time could vary significantly from the amounts we actually pay, due to inherent uncertainties and the inherent shortcomings of the estimation process, the uncertainties involved in litigation and other factors. Additionally, an adverse result could have a material effect on our financial condition, results of operations and liquidity.

XML

Condensed Consolidating Information (Details 2) (USD $) In Thousands, unless otherwise specified	3 Months Ended								12 Months Ended
	Dec. 31, 2011	Sep. 30, 2011	Jun. 30, 2011	Mar. 31, 2011	Dec. 31, 2010	Sep. 30, 2010	Jun. 30, 2010	Mar. 31, 2010	Dec. 31, 2011	Dec. 31, 2010	Dec. 31, 2009
Condensed Consolidating Financial Statements
Net sales	$ 1,858,345	$ 2,043,455	$ 2,079,731	$ 2,015,969	$ 1,528,134	$ 1,584,164	$ 1,632,799	$ 1,555,790	$ 7,997,500	$ 6,300,887	$ 3,958,806
Costs of goods sold									7,065,982	5,625,221	3,559,730
Gross profit (loss)	160,135	199,243	276,386	295,754	133,668	139,532	191,984	210,482	931,518	675,666	399,076
Selling, general and administrative									346,698	310,913	279,545
Operating income (loss)	82,490	108,785	188,219	205,326	46,821	69,000	116,635	132,297	584,820	364,753	119,531
Interest expense, net of capitalized interest									176,977	170,229	141,360
Other (income) expense, net									(16,476)	(18,935)	(3,592)
Income (loss) before income taxes and equity in net income of subsidiaries									424,319	213,459	(18,237)
Income taxes (benefit)									158,627	83,860	(7,218)
Net loss	25,779	39,857	95,826	104,230	4,058	15,355	46,797	63,389	265,692	129,599	(11,019)
Net loss attributable to noncontrolling interests									12,428	11,110	2,835
Net income (loss) attributable to Steel Dynamics, Inc.	30,203	43,304	98,710	105,903	7,792	18,741	49,207	64,969	278,120	140,709	(8,184)
Parent
Condensed Consolidating Financial Statements
Net sales									3,701,928	2,866,541	1,790,451
Costs of goods sold									3,099,941	2,467,780	1,628,271
Gross profit (loss)									601,987	398,761	162,180
Selling, general and administrative									135,509	98,410	68,633
Operating income (loss)									466,478	300,351	93,547
Interest expense, net of capitalized interest									104,008	99,639	83,297
Other (income) expense, net									(12,663)	(14,629)	49,255
Income (loss) before income taxes and equity in net income of subsidiaries									375,133	215,341	(39,005)
Income taxes (benefit)									111,532	84,718	(15,438)
Net loss									263,601	130,623	(23,567)
Equity in net income of subsidiaries									14,519	10,086	15,383
Net income (loss) attributable to Steel Dynamics, Inc.									278,120	140,709	(8,184)
Guarantors
Condensed Consolidating Financial Statements
Net sales									9,062,305	7,067,399	4,334,533
Costs of goods sold									8,604,620	6,701,621	4,055,388
Gross profit (loss)									457,685	365,778	279,145
Selling, general and administrative									217,717	215,723	208,847
Operating income (loss)									239,968	150,055	70,298
Interest expense, net of capitalized interest									71,487	67,659	58,049
Other (income) expense, net									(8,012)	(15,123)	(55,700)
Income (loss) before income taxes and equity in net income of subsidiaries									176,493	97,519	67,949
Income taxes (benefit)									66,734	36,325	26,894
Net loss									109,759	61,194	41,055
Net income (loss) attributable to Steel Dynamics, Inc.									109,759	61,194	41,055
Combined Non-Guarantors
Condensed Consolidating Financial Statements
Net sales									190,739	118,141	54,053
Costs of goods sold									251,528	164,400	52,996
Gross profit (loss)									(60,789)	(46,259)	1,057
Selling, general and administrative									9,184	8,724	15,057
Operating income (loss)									(69,973)	(54,983)	(14,000)
Interest expense, net of capitalized interest									8,784	13,168	735
Other (income) expense, net									(3,209)	(296)	9
Income (loss) before income taxes and equity in net income of subsidiaries									(75,548)	(67,855)	(14,744)
Income taxes (benefit)									(151)	(26,477)	(5,835)
Net loss									(75,397)	(41,378)	(8,909)
Net loss attributable to noncontrolling interests									12,428	11,110	2,835
Net income (loss) attributable to Steel Dynamics, Inc.									(62,969)	(30,268)	(6,074)
Consolidating Adjustments
Condensed Consolidating Financial Statements
Net sales									(4,957,472)	(3,751,194)	(2,220,231)
Costs of goods sold									(4,890,107)	(3,708,580)	(2,176,925)
Gross profit (loss)									(67,365)	(42,614)	(43,306)
Selling, general and administrative									(15,712)	(11,944)	(12,992)
Operating income (loss)									(51,653)	(30,670)	(30,314)
Interest expense, net of capitalized interest									(7,302)	(10,237)	(721)
Other (income) expense, net									7,408	11,113	2,844
Income (loss) before income taxes and equity in net income of subsidiaries									(51,759)	(31,546)	(32,437)
Income taxes (benefit)									(19,488)	(10,706)	(12,839)
Net loss									(32,271)	(20,840)	(19,598)
Equity in net income of subsidiaries									(14,519)	(10,086)	(15,383)
Net income (loss) attributable to Steel Dynamics, Inc.									$ (46,790)	$ (30,926)	$ (34,981)

XML

Derivative Financial Instruments

12 Months Ended

Dec. 31, 2011

Derivative Financial Instruments

Derivative Financial Instruments

Note 6. Derivative Financial Instruments

        The company is exposed to certain risks relating to its ongoing business operations. At times the company utilizes derivative instruments to mitigate commodity margin risk, interest rate risk, and foreign currency exchange rate risk. Forward contracts on various commodities are entered into to manage the price risk associated with forecasted purchases and sales of nonferrous materials (specifically aluminum, copper, nickel and silver) from the company's metals recycling operations. Interest rate swaps may be entered into to manage interest rate risk associated with the company's fixed and floating-rate borrowings. Forward exchange contracts on various foreign currencies may be entered into to manage the foreign currency exchange rate risk as necessary.

        The company designated an interest rate swap, which was terminated in June 2009, as a cash flow hedge of floating-rate borrowings. Forward contracts on various commodities and forward exchange contracts on various foreign currencies are not designated as hedging instruments.

        Cash Flow Hedging Strategy.    For derivative instruments that are designated and qualify as a cash flow hedge (i.e., hedging the exposure to variability in expected future cash flows that is attributable to a particular risk), the effective portion of the gain or loss on the derivative instrument is reported as a component of other comprehensive income and reclassified into earnings in the same line item associated with the forecasted transaction and in the same period or periods during which the hedged transaction affects earnings (e.g., in "interest expense" when the hedged transactions are interest cash flows associated with floating-rate borrowings). The remaining gain or loss on the derivative instrument in excess of the cumulative change in the present value of future cash flows of the hedged item, if any (i.e., the ineffectiveness portion), or hedge components excluded from the assessment of effectiveness, are recognized in the statement of operations during the current period.

        Commodity futures contracts.    If the company is "long" on futures contracts, it means the company has more futures contracts purchased than futures contracts sold for the underlying commodity. If the company is "short" on a futures contract, it means the company has more futures contracts sold than futures contracts purchased for the underlying commodity. The following summarizes the company's commodity futures contract commitments as of December 31, 2011 (MT represents metric tons and Lbs represents pounds):

Commodity	Long/Short	Total
Aluminum	Long		10,200	MT
Aluminum	Short		8,550	MT
Copper	Long		2,427	MT
Copper	Short		7,394	MT
Nickel	Long		36	MT
Nickel	Short		198	MT
Silver	Short		343	Lbs

        The following summarizes the location and amounts of the fair values reported on the company's balance sheets and gains or losses related to derivatives included in the company's statements of operations as of and for the years ended December 31 (in thousands):

		Fair Value
Balance Sheets, as of December 31		2011		2010
Commodity futures net liability	Accrued expenses	$	1,219	$	4,988

		Gain (Loss)
Statements of Operations, Years Ended December 31		2011		2010			2009
Commodity futures contracts	Costs of goods sold	$	12,531	$	(5,907	)	$	7,347
Interest rate swap	Other comprehensive income		—		—			2,294
Interest rate swap	Other expense		—		—			(1,350	)

XML

Fair Value Measurements

12 Months Ended

Dec. 31, 2011

Fair Value Measurements

Fair Value Measurements

Note 7. Fair Value Measurements

        FASB accounting standards provide a comprehensive framework for measuring fair value and sets forth a definition of fair value and establishes a hierarchy prioritizing the inputs to valuation techniques, giving the highest priority to quoted prices in active markets for identical assets and liabilities and the lowest priority to unobservable value inputs. Levels within the hierarchy are defined as follows:

• •

  Level 1—Unadjusted quoted prices for identical assets and liabilities in active markets;

  •

  Level 2—Quoted prices for similar assets and liabilities in active markets (other than those included in Level 1) which are observable for the asset or liability, either directly or indirectly; and

  •

  Level 3—Valuations derived from valuation techniques in which one or more significant inputs or significant value drivers are unobservable.

        The following table sets forth financial assets and liabilities measured at fair value in the consolidated balance sheet and the respective levels to which the fair value measurements are classified within the fair value hierarchy as of December 31 (in thousands):

	Total		Quoted Prices in Active Markets for Identical Assets (Level 1)		Significant Other Observable Inputs (Level 2)		Significant Unobservable Inputs (Level 3)
2011
Investment in short-term commercial paper	$	84,830	$	—	$	84,830	$	—
Commodity futures—financial assets		3,159		—		3,159		—
Commodity futures—financial liabilities		4,378		—		4,378		—
2010
Commodity futures—financial assets		7,052		—		7,052		—
Commodity futures—financial liabilities		12,040		—		12,040		—

        The carrying amounts of financial instruments including cash and equivalents, accounts receivable and accounts payable approximate fair value, because of the relatively short maturity of these instruments. The fair values of short-term commercial paper and commodity futures contracts are estimated by the use of quoted market prices, estimates obtained from brokers, and other appropriate valuation techniques based on references available. The fair value of long-term debt, including current maturities, as determined by quoted market prices, was approximately $2.5 billion (with a corresponding carrying amount in the consolidated balance sheet of $2.4 billion) at both December 31, 2011 and 2010.

        Certain assets of our idled South Carolina fabrication facility were analyzed for impairment in the fourth quarter of 2010 as discussed in Note 1, resulting in an impairment charge of $12.8 million. The $9.2 million then current fair value (and new cost basis) was determined utilizing market and cost approaches (Level 2).

XML

Transactions with Affiliated Companies

12 Months Ended

Dec. 31, 2011

Transactions with Affiliated Companies

Transactions with Affiliated Companies

Note 9. Transactions with Affiliated Companies

        The company sells flat rolled products and occasionally purchases ferrous materials from Heidtman. The president and chief executive officer of Heidtman is a member of the company's board of directors and a stockholder of the company. Transactions with Heidtman for the years ended December 31, are as follows (in thousands):

	2011			2010			2009
Sales	$	242,300		$	202,897		$	132,272
Percentage of consolidated net sales		3	%		3	%		3	%
Accounts receivable		35,646			31,544			26,983
Purchases		18,998			18,275			11,864
Accounts payable		882			969			468

        On September 15, 2009, the company purchased from Heidtman a 32 acre tract of land adjacent to the company's Flat Roll Division in Butler, Indiana, together with a 387,000 square foot building for a purchase price of $9.3 million. Contemporaneously the company purchased from Heidtman equipment located at this site for a purchase price of $18.6 million. Immediately following the acquisition of this property, the company leased the real estate and equipment to Heidtman for a term of five years commencing on September 15, 2009, and terminating on August 31, 2014. Heidtman pays the company a monthly rental for the real estate and for the equipment. The real estate and equipment have been used, and will continue to be used, by Heidtman in its steel processing operations.

        The company also purchases and sells recycled and scrap metal with other smaller affiliated companies. These transactions are as follows (in thousands):

	2011		2010		2009
Sales	$	36,486	$	37,057	$	16,156
Accounts receivable		7,247		6,577		3,573
Purchases		239,395		177,166		81,926
Accounts payable		5,702		12,601		6,297

XML

Quarterly Financial Information (unaudited, in thousands, except per share data) (Tables)

12 Months Ended

Dec. 31, 2011

Quarterly Financial Information (unaudited, in thousands, except per share data)

Schedule of quarterly financial information

	1st Quarter		2nd Quarter		3rd Quarter		4th Quarter
2011:
Net sales	$	2,015,969	$	2,079,731	$	2,043,455	$	1,858,345
Gross profit		295,754		276,386		199,243		160,135
Operating income		205,326		188,219		108,785		82,490
Net income		104,230		95,826		39,857		25,779
Net income attributable to Steel Dynamics, Inc.		105,903		98,710		43,304		30,203
Earnings per share:
Basic		.49		.45		.20		.14
Diluted		.46		.43		.19		.14
2010:
Net sales	$	1,555,790	$	1,632,799	$	1,584,164	$	1,528,134
Gross profit		210,482		191,984		139,532		133,668
Operating income		132,297		116,635		69,000		46,821
Net income		63,389		46,797		15,355		4,058
Net income attributable to Steel Dynamics, Inc.		64,969		49,207		18,741		7,792
Earnings per share:
Basic		.30		.23		.09		.04
Diluted		.29		.22		.09		.04

XML

Fair Value Measurements (Details) (USD $)	12 Months Ended
	Dec. 31, 2010	Dec. 31, 2011
Assets and liabilities subject to fair value measurements
Investment in short-term commercial paper		$ 84,830,000
Carrying amount of long-term debt, including current maturities	2,386,821,000	2,380,100,000
Impairment charges	12,805,000
Assets , fair value	9,200,000
Recurring basis | Total
Assets and liabilities subject to fair value measurements
Investment in short-term commercial paper		84,830,000
Commodity futures - financial assets	7,052,000	3,159,000
Commodity futures - financial liabilities	12,040,000	4,378,000
Fair value of long-term debt, including current maturities	2,500,000,000	2,500,000,000
Carrying amount of long-term debt, including current maturities	2,400,000,000	2,400,000,000
Recurring basis | Significant Other Observable Inputs (Level 2)
Assets and liabilities subject to fair value measurements
Investments in short-term commercial paper		84,830,000
Commodity futures - financial assets	7,052,000	3,159,000
Commodity futures - financial liabilities	$ 12,040,000	$ 4,378,000

XML

Quarterly Financial Information (unaudited, in thousands, except per share data)

12 Months Ended

Dec. 31, 2011

Quarterly Financial Information (unaudited, in thousands, except per share data)

Quarterly Financial Information (unaudited, in thousands, except per share data)

Note 14. Quarterly Financial Information (unaudited, in thousands, except per share data)

	1st Quarter		2nd Quarter		3rd Quarter		4th Quarter
2011:
Net sales	$	2,015,969	$	2,079,731	$	2,043,455	$	1,858,345
Gross profit		295,754		276,386		199,243		160,135
Operating income		205,326		188,219		108,785		82,490
Net income		104,230		95,826		39,857		25,779
Net income attributable to Steel Dynamics, Inc.		105,903		98,710		43,304		30,203
Earnings per share:
Basic		.49		.45		.20		.14
Diluted		.46		.43		.19		.14
2010:
Net sales	$	1,555,790	$	1,632,799	$	1,584,164	$	1,528,134
Gross profit		210,482		191,984		139,532		133,668
Operating income		132,297		116,635		69,000		46,821
Net income		63,389		46,797		15,355		4,058
Net income attributable to Steel Dynamics, Inc.		64,969		49,207		18,741		7,792
Earnings per share:
Basic		.30		.23		.09		.04
Diluted		.29		.22		.09		.04

        Earnings per share are computed independently for each of the quarters presented. Therefore, the sum of the quarterly earnings per share may not equal the total for the year.

XML

Equity-based Incentive Plans (Tables)

12 Months Ended

Dec. 31, 2011

Equity-based Incentive Plans

Schedule of valuation assumptions used in determining the fair value of stock options

	2011			2010			2009
Volatility(1)		65.1 - 66.3	%		66.4 - 67.0	%		67.2 - 67.4	%
Risk-free interest rate(2)		0.4 - 1.4	%		0.8 - 2.0	%		2.1 - 2.2	%
Dividend yield(3)		2.3 - 2.5	%		2.0 - 2.2	%		1.7 - 2.0	%
Expected life (years)(4)		2.8 - 4.1			2.8 - 4.1			2.2 - 3.9

(1)

The volatility is based on the historical volatility of the company's stock.

(2)

The risk-free interest rate is based on the U.S. Treasury strip rate for the expected life of the option.

(3)

The expected dividend yield is based on the company's latest annualized dividend rate and recent historical market prices of the underlying common stock at the date of grant.

(4)

The expected life in years is determined primarily from historical stock option exercise data.

Schedule of stock option activity for all plans

	Options			Weighted Average Exercise Price		Weighted Average Fair Value
Outstanding options as of January 1, 2009		7,986,681		$	10.86	$	3.40
Granted		1,637,107			15.04		5.14
Exercised		(2,807,898	)		5.81		2.57
Forfeited		(326,519	)		15.83		5.92
As of December 31, 2009		6,489,371			13.69		5.09
Granted		2,545,932			14.73		5.81
Exercised		(1,414,153	)		8.11		2.89
Forfeited		(214,757	)		20.35		6.33
As of December 31, 2010		7,406,393			14.91		5.14
Granted		2,742,904			14.34		5.36
Exercised		(1,047,297	)		11.37		4.28
Forfeited		(499,718	)		16.61		6.15
As of December 31, 2011		8,602,282			15.06		5.25

Schedule of information concerning outstanding options, by range of exercise price

Range of Exercise Price	Outstanding Options		Weighted Average Remaining Contractual Life (Years)		Weighted Average Exercise Price Outstanding Options		Exercisable Options		Weighted Average Exercise Price Exercisable Options
$0 to $10		1,530,294		1.9	$	5.23		1,530,294	$	5.23
$10 to $15		3,094,843		4.0		13.13		1,498,555		13.76
$15 to $20		2,781,396		3.9		16.39		2,781,396		16.39
$20 to $30		741,037		0.7		24.50		741,037		24.50
$30 to $40		454,712		1.4		37.84		454,712		37.84

XML

Equity-based Incentive Plans (Details 3) (USD $)	12 Months Ended
	Dec. 31, 2011 year
Range of Exercise Price $0 to $10
Stock options outstanding and exercisable by exercise price range
Exercise price per share, low end of the range (in dollars per share)	$ 0
Exercise price per share, high end of the range (in dollars per share)	$ 10
Outstanding Options (in shares)	1,530,294
Weighted Average Remaining Contractual Life (Years)	1.9
Weighted Average Exercise Price Outstanding Options (per share)	$ 5.23
Exercisable Options (in shares)	1,530,294
Weighted Average Exercise Price Exercisable Options (in dollars per share)	$ 5.23
Range of Exercise Price $10 to $15
Stock options outstanding and exercisable by exercise price range
Exercise price per share, low end of the range (in dollars per share)	$ 10
Exercise price per share, high end of the range (in dollars per share)	$ 15
Outstanding Options (in shares)	3,094,843
Weighted Average Remaining Contractual Life (Years)	4.0
Weighted Average Exercise Price Outstanding Options (per share)	$ 13.13
Exercisable Options (in shares)	1,498,555
Weighted Average Exercise Price Exercisable Options (in dollars per share)	$ 13.76
Range of Exercise Price $15 to $20
Stock options outstanding and exercisable by exercise price range
Exercise price per share, low end of the range (in dollars per share)	$ 15
Exercise price per share, high end of the range (in dollars per share)	$ 20
Outstanding Options (in shares)	2,781,396
Weighted Average Remaining Contractual Life (Years)	3.9
Weighted Average Exercise Price Outstanding Options (per share)	$ 16.39
Exercisable Options (in shares)	2,781,396
Weighted Average Exercise Price Exercisable Options (in dollars per share)	$ 16.39
Range of Exercise Price $20 to $30
Stock options outstanding and exercisable by exercise price range
Exercise price per share, low end of the range (in dollars per share)	$ 20
Exercise price per share, high end of the range (in dollars per share)	$ 30
Outstanding Options (in shares)	741,037
Weighted Average Remaining Contractual Life (Years)	0.7
Weighted Average Exercise Price Outstanding Options (per share)	$ 24.50
Exercisable Options (in shares)	741,037
Weighted Average Exercise Price Exercisable Options (in dollars per share)	$ 24.50
Range of Exercise Price $30 to $40
Stock options outstanding and exercisable by exercise price range
Exercise price per share, low end of the range (in dollars per share)	$ 30
Exercise price per share, high end of the range (in dollars per share)	$ 40
Outstanding Options (in shares)	454,712
Weighted Average Remaining Contractual Life (Years)	1.4
Weighted Average Exercise Price Outstanding Options (per share)	$ 37.84
Exercisable Options (in shares)	454,712
Weighted Average Exercise Price Exercisable Options (in dollars per share)	$ 37.84

XML

Description of the Business and Summary of Significant Accounting Policies (Details 7) (Credit risk)	12 Months Ended
	Dec. 31, 2011 entity	Dec. 31, 2011 Accounts receivable	Dec. 31, 2010 Accounts receivable
Concentration of credit risk
Number of institutions exposed to credit risk	1
Percentage of consolidated net accounts receivable from related party		5.00%	5.00%

XML

CONSOLIDATED STATEMENTS OF EQUITY (USD $) In Thousands, except Share data, unless otherwise specified	Total	Common Stock	Additional Paid-In Capital	Retained Earnings	Other Accumulated Comprehensive Income (Loss)	Noncontrolling Interests	Treasury Stock	Comprehensive Income
Balances at Dec. 31, 2008	$ 1,632,313	$ 545	$ 541,686	$ 1,820,385	$ (1,411)	$ 8,427	$ (737,319)
Balances (in shares) at Dec. 31, 2008		181,820,000					36,913,000
Increase (Decrease) in Stockholders' Equity
Issuance of common stock (net of expenses) and proceeds from exercise of stock options, including related tax effect	420,930	84	420,846
Issuance of common stock (net of expenses) and proceeds from exercise of stock options, including related tax effect (in shares)		33,857,000
Dividends declared	(66,690)			(66,690)
Contributions from noncontrolling investors	5,000					5,000
Change in noncontrolling investment	2,366					2,366
Tax adjustment to noncontrolling interests	2,039					2,039
Equity-based compensation	16,915		10,453				6,462
Equity-based compensation (in shares)		323,000					(323,000)
Comprehensive loss:
Net loss	(11,019)			(8,184)		(2,835)		(11,019)
Reversal of unrealized loss on interest rate swap, net of tax of $883	1,411				1,411			1,411
Comprehensive income and net income (loss)	(9,608)							(9,608)
Balances at Dec. 31, 2009	2,003,265	629	972,985	1,745,511		14,997	(730,857)
Balances (in shares) at Dec. 31, 2009		216,000,000					36,590,000
Increase (Decrease) in Stockholders' Equity
Issuance of common stock (net of expenses) and proceeds from exercise of stock options, including related tax effect	14,014	4	14,010
Issuance of common stock (net of expenses) and proceeds from exercise of stock options, including related tax effect (in shares)		1,413,000
Dividends declared	(65,087)			(65,087)
Contributions from noncontrolling investors	5,348					5,348
Transfer to redeemable noncontrolling interest	(23,800)					(23,800)
Tax adjustment to noncontrolling interests	(1,470)					(1,470)
Equity-based compensation	14,966		11,733				3,233
Equity-based compensation (in shares)		162,000					(162,000)
Comprehensive loss:
Net loss	129,599			140,709		(11,110)		129,599
Balances at Dec. 31, 2010	2,076,835	633	998,728	1,821,133		(16,035)	(727,624)
Balances (in shares) at Dec. 31, 2010	217,574,826	217,575,000					36,428,000
Increase (Decrease) in Stockholders' Equity
Issuance of common stock (net of expenses) and proceeds from exercise of stock options, including related tax effect	13,396	3	13,393
Issuance of common stock (net of expenses) and proceeds from exercise of stock options, including related tax effect (in shares)		1,050,000
Dividends declared	(87,452)			(87,452)
Contributions from noncontrolling investors	12,989					12,989
Distributions to noncontrolling investor	(567)					(567)
Equity-based compensation	19,007		14,036				4,971
Equity-based compensation (in shares)		249,000					(249,000)
Comprehensive loss:
Net loss	265,692			278,120		(12,428)		265,692
Balances at Dec. 31, 2011	$ 2,299,900	$ 636	$ 1,026,157	$ 2,011,801		$ (16,041)	$ (722,653)
Balances (in shares) at Dec. 31, 2011	218,873,720	218,874,000					36,179,000

XML

Income Taxes

12 Months Ended

Dec. 31, 2011

Income Taxes

Income Taxes

Note 3. Income Taxes

        The company files a consolidated federal income tax return. Net cash paid for taxes was $75.9 million for the year ended December 31, 2011, and net cash received for taxes was $66.3 million and $59.4 million for the years ended December 31, 2010 and 2009, respectively. The current and deferred federal and state income tax expense (benefit) for the years ended December 31 is as follows (in thousands):

	2011		2010		2009
Current income tax expense (benefit)	$	128,209	$	39,554	$	(96,140	)
Deferred income tax expense		30,418		44,306		88,922
Total income tax expense (benefit)	$	158,627	$	83,860	$	(7,218	)

        A reconciliation of the statutory tax rates to the actual effective tax rates for the years ended December 31, are as follows:

	2011			2010			2009
Statutory federal tax rate		35.0	%		35.0	%		35.0	%
State income taxes, net of federal benefit		3.5			3.2			1.9
Other permanent differences		(1.1	)		1.1			2.7
Effective tax rate		37.4	%		39.3	%		39.6	%

        Significant components of the company's deferred tax assets and liabilities at December 31 are as follows (in thousands):

	2011			2010
Deferred tax assets
Capitalized start-up costs	$	29,182		$	29,728
Assets capitalized for tax, expensed for books		32,711			28,017
Accrued expenses		31,824			26,122
Total deferred tax assets		93,717			83,867
Deferred tax liabilities
Property, plant and equipment		(471,847	)		(448,557	)
Intangible assets		(79,778	)		(69,455	)
Other		(6,666	)		(2,603	)
Total deferred tax liabilities		(558,291	)		(520,615	)
Net deferred tax liability	$	(464,574	)	$	(436,748	)

        A reconciliation of the beginning and ending amount of unrecognized tax benefits is as follows (in thousands):

	2011			2010			2009
Balance at January 1	$	49,396		$	49,587		$	47,875
Increases related to current year tax positions		2,046			300			780
Increases related to prior year tax positions		13,785			1,361			5,099
Decreases related to prior year tax positions		(196	)		(496	)		(3,766	)
Lapses in statutes of limitations		—			(1,128	)		(401	)
Settlements with taxing authorities		(476	)		(228	)		—
Balance at December 31	$	64,555		$	49,396		$	49,587

        Included in the balance of unrecognized tax benefits at December 31, 2011 are potential benefits of $24.6 million that, if recognized, would affect the effective tax rate. The company recognizes interest and penalties related to its tax contingencies on a net-of-tax basis in income tax expense. During the year ended December 31, 2011, the company recognized interest expense of $3.1 million, net of tax, and penalties of $35,000. In addition to the unrecognized tax benefits in the table above, the company had $16.1 million accrued for the payment of interest and penalties at December 31, 2011.

        The company files income tax returns in the U.S. federal jurisdiction as well as income tax returns in various state jurisdictions. The Internal Revenue Service (IRS) is currently examining the company's federal income tax returns for the years 2004 through 2009. At this time the company does not believe there will be any significant examination adjustments that would result in a material change to the company's financial position or results of operations. It is reasonably possible that the amount of unrecognized tax benefits could change in the next twelve months as a result of these state and federal income tax audits. Based on the current audits in process, the payment of taxes as a result of audit settlements could be in an amount from zero to $2.3 million by the end of 2012. With few exceptions, including those discussed above, the company is no longer subject to federal, state and local income tax examinations by tax authorities for years ended before 2008.

XML

Segment Information (Details 3) (USD $)	3 Months Ended								12 Months Ended
	Dec. 31, 2011	Sep. 30, 2011	Jun. 30, 2011	Mar. 31, 2011	Dec. 31, 2010	Sep. 30, 2010	Jun. 30, 2010	Mar. 31, 2010	Dec. 31, 2011	Dec. 31, 2010	Dec. 31, 2009
Operating income (loss)
Gross profit increase from intra-company sales	$ 160,135,000	$ 199,243,000	$ 276,386,000	$ 295,754,000	$ 133,668,000	$ 139,532,000	$ 191,984,000	$ 210,482,000	$ 931,518,000	$ 675,666,000	$ 399,076,000
Assets elimination
Elimination of intra-company receivables	722,791,000				622,189,000				722,791,000	622,189,000
Other	134,264,000				135,683,000				134,264,000	135,683,000
Total assets	5,979,226,000				5,589,934,000				5,979,226,000	5,589,934,000	5,129,872,000
Liabilities elimination
Elimination of intra-company payables	420,824,000				348,601,000				420,824,000	348,601,000
Liabilities	3,608,632,000				3,458,804,000				3,608,632,000	3,458,804,000	3,126,607,000
Eliminations
Operating income (loss)
Gross profit increase from intra-company sales									1,800,000	(3,500,000)	(20,300,000)
Assets elimination
Elimination of intra-company receivables	(36,100,000)				(36,000,000)				(36,100,000)	(36,000,000)	(27,000,000)
Elimination of intra-company debt	(152,800,000)				(134,800,000)				(152,800,000)	(134,800,000)	(174,900,000)
Other	(9,300,000)				(25,800,000)				(9,300,000)	(25,800,000)	400,000
Total assets	(198,248,000)				(196,557,000)				(198,248,000)	(196,557,000)	(201,460,000)
Liabilities elimination
Elimination of intra-company payables	(36,100,000)				(36,000,000)				(36,100,000)	(36,000,000)	(27,000,000)
Liabilities	(189,084,000)				(173,289,000)				(189,084,000)	(173,289,000)	(197,198,000)
Elimination of intra-company debt	(152,800,000)				(134,800,000)				(152,800,000)	(134,800,000)	(174,900,000)
Other liabilities	$ (200,000)				$ (2,500,000)				$ (200,000)	$ (2,500,000)	$ 4,700,000

XML

Derivative Financial Instruments (Tables)

12 Months Ended

Dec. 31, 2011

Derivative Financial Instruments

Commodity future contracts commitment for non monetary notional amount

The following summarizes the company's commodity futures contract commitments as of December 31, 2011 (MT represents metric tons and Lbs represents pounds):

Commodity	Long/Short	Total
Aluminum	Long		10,200	MT
Aluminum	Short		8,550	MT
Copper	Long		2,427	MT
Copper	Short		7,394	MT
Nickel	Long		36	MT
Nickel	Short		198	MT
Silver	Short		343	Lbs

Summary of the location and amounts of the fair values and gains or losses related to derivatives included in the entity's financial statements

		Fair Value
Balance Sheets, as of December 31		2011		2010
Commodity futures net liability	Accrued expenses	$	1,219	$	4,988

		Gain (Loss)
Statements of Operations, Years Ended December 31		2011		2010			2009
Commodity futures contracts	Costs of goods sold	$	12,531	$	(5,907	)	$	7,347
Interest rate swap	Other comprehensive income		—		—			2,294
Interest rate swap	Other expense		—		—			(1,350	)

XML

Description of the Business and Summary of Significant Accounting Policies (Details 4) (USD $)	12 Months Ended
	Dec. 31, 2011	Dec. 31, 2010
Goodwill
Goodwill	$ 745,066,000	$ 751,675,000
Omni Source
Goodwill
Goodwill	571,317,000	577,926,000
Goodwill decrease due to tax benefit related to the amortization of the component	6,600,000
The Techs - Steel Segment
Goodwill
Goodwill	142,783,000	142,783,000
Roanoke Bar Division - Steel Segment
Goodwill
Goodwill	29,041,000	29,041,000
New Millennium Building Systems
Goodwill
Goodwill	$ 1,925,000	$ 1,925,000

XML

Condensed Consolidating Information

12 Months Ended

Dec. 31, 2011

Condensed Consolidating Information

Condensed Consolidating Information

Note 13. Condensed Consolidating Information

        Certain 100%-owned subsidiaries of SDI have fully and unconditionally guaranteed all of the indebtedness relating to the issuance of the company's senior notes due 2012, 2014, 2015, 2016 and 2020. Following are the company's condensed consolidating financial statements, including the guarantors, which present the financial position, results of operations and cash flows of (i) SDI (in each case, reflecting investments in its consolidated subsidiaries under the equity method of accounting), (ii) the guarantor subsidiaries of SDI, (iii) the non-guarantor subsidiaries of SDI, and (iv) the eliminations necessary to arrive at the information on a consolidated basis. The following statements should be read in conjunction with the accompanying consolidated financial statements, and notes thereto.

Condensed Consolidating Balance Sheets (in thousands)

As of December 31, 2011	Parent			Guarantors		Combined Non-Guarantors			Consolidating Adjustments			Total Consolidated
Cash and equivalents	$	301,073		$	58,699	$	30,989		$	—		$	390,761
Investments in short-term commercial paper		84,830			—		—			—			84,830
Accounts receivable, net		319,995			726,192		8,971			(332,367	)		722,791
Inventories		584,079			533,022		85,046			(2,563	)		1,199,584
Other current assets		83,116			4,119		2,304			(32,247	)		57,292
Total current assets		1,373,093			1,322,032		127,310			(367,177	)		2,455,258
Property, plant and equiment, net		1,059,011			660,048		477,514			(2,828	)		2,193,745
Intangible assets, net		—			450,893		—			—			450,893
Goodwill		—			745,066		—			—			745,066
Other assets, including investments in subs		2,791,718			33,507		9,853			(2,700,814	)		134,264
Total assets	$	5,223,822		$	3,211,546	$	614,677		$	(3,070,819	)	$	5,979,226
Accounts payable	$	155,220		$	273,049	$	23,195		$	(30,640	)	$	420,824
Accrued expenses		157,868			98,498		10,012			(30,863	)		235,515
Current maturities of long-term debt		439,199			300		53,551			(48,972	)		444,078
Total current liabilities		752,287			371,847		86,758			(110,475	)		1,100,417
Long-term debt		1,905,199			—		169,797			(138,974	)		1,936,022
Other liabilities		250,395			2,132,778		51,625			(1,862,605	)		572,193
Redeemable noncontrolling interest		—			—		70,694			—			70,694
Common stock		636			33,896		18,121			(52,017	)		636
Treasury stock		(722,653	)		—		—			—			(722,653	)
Additional paid-in-capital		1,026,157			117,737		347,151			(464,888	)		1,026,157
Retained earnings (deficit)		2,011,801			555,288		(113,428	)		(441,860	)		2,011,801
Total Steel Dynamics, Inc. equity		2,315,941			706,921		251,844			(958,765	)		2,315,941
Noncontrolling interests		—			—		(16,041	)		—			(16,041	)
Total equity		2,315,941			706,921		235,803			(958,765	)		2,299,900
Total liabilities and equity	$	5,223,822		$	3,211,546	$	614,677		$	(3,070,819	)	$	5,979,226

Condensed Consolidating Balance Sheets (in thousands)

As of December 31, 2010	Parent			Guarantors		Combined Non-Guarantors			Consolidating Adjustments			Total Consolidated
Cash and equivalents	$	173,563		$	10,628	$	2,322		$	—		$	186,513
Accounts receivable, net		283,883			614,412		7,282			(283,388	)		622,189
Inventories		548,726			487,298		84,183			(6,144	)		1,114,063
Other current assets		96,040			9,757		3,444			(32,003	)		77,238
Total current assets		1,102,212			1,122,095		97,231			(321,535	)		2,000,003
Property, plant and equiment, net		1,110,350			684,118		421,897			(3,032	)		2,213,333
Intangible assets, net		—			489,240		—			—			489,240
Goodwill		—			751,675		—			—			751,675
Other assets, including investments in subs(1)		2,788,097			36,617		7,601			(2,696,632	)		135,683
Total assets	$	5,000,659		$	3,083,745	$	526,729		$	(3,021,199	)	$	5,589,934
Accounts payable	$	127,246		$	227,823	$	26,015		$	(32,483	)	$	348,601
Accrued expenses		123,498			102,114		8,497			(30,317	)		203,792
Current maturities of long-term debt		7,554			325		34,604			(33,559	)		8,924
Total current liabilities		258,298			330,262		69,116			(96,359	)		561,317
Long-term debt		2,344,399			—		168,278			(134,780	)		2,377,897
Other liabilities(1)		305,092			2,158,725		27,072			(1,971,298	)		519,591
Redeemable noncontrolling interest		—			—		54,294			—			54,294
Common stock		633			33,901		16,121			(50,022	)		633
Treasury stock		(727,624	)		—		—			—			(727,624	)
Additional paid-in-capital		998,728			117,737		256,905			(374,642	)		998,728
Retained earnings (deficit)		1,821,133			443,120		(49,022	)		(394,098	)		1,821,133
Total Steel Dynamics, Inc. equity		2,092,870			594,758		224,004			(818,762	)		2,092,870
Noncontrolling interests		—			—		(16,035	)		—			(16,035	)
Total equity		2,092,870			594,758		207,969			(818,762	)		2,076,835
Total liabilities and equity	$	5,000,659		$	3,083,745	$	526,729		$	(3,021,199	)	$	5,589,934

(1)

Certain deferred tax asset and liability accounts have been reclassified at December 31, 2010, to conform to the December 31, 2011 presentation. These reclassifications had no impact to previously reported equity or total consolidated amounts.

Condensed Consolidating Statements of Operations (in thousands)

For the Year Ended, December 31, 2011	Parent			Guarantors			Combined Non-Guarantors			Consolidating Adjustments			Total Consolidated
Net sales	$	3,701,928		$	9,062,305		$	190,739		$	(4,957,472	)	$	7,997,500
Costs of goods sold		3,099,941			8,604,620			251,528			(4,890,107	)		7,065,982
Gross profit (loss)		601,987			457,685			(60,789	)		(67,365	)		931,518
Selling, general and administrative		135,509			217,717			9,184			(15,712	)		346,698
Operating income (loss)		466,478			239,968			(69,973	)		(51,653	)		584,820
Interest expense, net of capitalized interest		104,008			71,487			8,784			(7,302	)		176,977
Other (income) expense, net		(12,663	)		(8,012	)		(3,209	)		7,408			(16,476	)
Income (loss) before income taxes and equity in net income of subsidiaries		375,133			176,493			(75,548	)		(51,759	)		424,319
Income taxes (benefit)		111,532			66,734			(151	)		(19,488	)		158,627
		263,601			109,759			(75,397	)		(32,271	)		265,692
Equity in net income of subsidiaries		14,519			—			—			(14,519	)		—
Net loss attributable to noncontrolling interests		—			—			12,428			—			12,428
Net income (loss) attributable to Steel Dynamics, Inc.	$	278,120		$	109,759		$	(62,969	)	$	(46,790	)	$	278,120

For the Year Ended, December 31, 2010	Parent			Guarantors			Combined Non-Guarantors			Consolidating Adjustments			Total Consolidated
Net sales	$	2,866,541		$	7,067,399		$	118,141		$	(3,751,194	)	$	6,300,887
Costs of goods sold		2,467,780			6,701,621			164,400			(3,708,580	)		5,625,221
Gross profit (loss)		398,761			365,778			(46,259	)		(42,614	)		675,666
Selling, general and administrative		98,410			215,723			8,724			(11,944	)		310,913
Operating income (loss)		300,351			150,055			(54,983	)		(30,670	)		364,753
Interest expense, net of capitalized interest		99,639			67,659			13,168			(10,237	)		170,229
Other (income) expense, net		(14,629	)		(15,123	)		(296	)		11,113			(18,935	)
Income (loss) before income taxes and equity in net income of subsidiaries		215,341			97,519			(67,855	)		(31,546	)		213,459
Income taxes (benefit)		84,718			36,325			(26,477	)		(10,706	)		83,860
		130,623			61,194			(41,378	)		(20,840	)		129,599
Equity in net income of subsidiaries		10,086			—			—			(10,086	)		—
Net loss attributable to noncontrolling interests		—			—			11,110			—			11,110
Net income (loss) attributable to Steel Dynamics, Inc.	$	140,709		$	61,194		$	(30,268	)	$	(30,926	)	$	140,709

For the Year Ended, December 31, 2009	Parent			Guarantors			Combined Non-Guarantors			Consolidating Adjustments			Total Consolidated
Net sales	$	1,790,451		$	4,334,533		$	54,053		$	(2,220,231	)	$	3,958,806
Costs of goods sold		1,628,271			4,055,388			52,996			(2,176,925	)		3,559,730
Gross profit (loss)		162,180			279,145			1,057			(43,306	)		399,076
Selling, general and administrative		68,633			208,847			15,057			(12,992	)		279,545
Operating income (loss)		93,547			70,298			(14,000	)		(30,314	)		119,531
Interest expense, net of capitalized interest		83,297			58,049			735			(721	)		141,360
Other (income) expense, net		49,255			(55,700	)		9			2,844			(3,592	)
Income (loss) before income taxes and equity in net income of subsidiaries		(39,005	)		67,949			(14,744	)		(32,437	)		(18,237	)
Income taxes (benefit)		(15,438	)		26,894			(5,835	)		(12,839	)		(7,218	)
		(23,567	)		41,055			(8,909	)		(19,598	)		(11,019	)
Equity in net income of subsidiaries		15,383			—			—			(15,383	)		—
Net loss attributable to noncontrolling interests		—			—			2,835			—			2,835
Net income (loss) attributable to Steel Dynamics, Inc.	$	(8,184	)	$	41,055		$	(6,074	)	$	(34,981	)	$	(8,184	)

Condensed Consolidating Statements of Cash Flows (in thousands)

For the Year Ended, December 31, 2011	Parent			Guarantors			Combined Non-Guarantors			Consolidating Adjustments			Total Consolidated
Net cash provided by (used in) operating activities	$	380,171		$	173,574		$	(68,110	)	$	720		$	486,355
Net cash provided by (used in) investing activities		(230,314	)		(50,576	)		(65,144	)		110,197			(235,837	)
Financing activities
Issuance of long term debt		—			10,103			101,686			(101,686	)		10,103
Repayments of long term debt		(6,505	)		(1,075	)		(82,241	)		82,081			(7,740	)
Other		(15,842	)		(83,955	)		142,476			(91,312	)		(48,633	)
Net cash provided by (used in) financing activities		(22,347	)		(74,927	)		161,921			(110,917	)		(46,270	)
Increase in cash and equivalents		127,510			48,071			28,667			—			204,248
Cash and equivalents at beginning of period		173,563			10,628			2,322			—			186,513
Cash and equivalents at end of period	$	301,073		$	58,699		$	30,989		$	—		$	390,761

For the Year Ended, December 31, 2010	Parent			Guarantors			Combined Non-Guarantors			Consolidating Adjustments			Total Consolidated
Net cash provided by (used in) operating activities	$	262,155		$	17,011		$	(109,221	)	$	(638	)	$	169,307
Net cash provided by (used in) investing activities		(38,811	)		(51,414	)		(59,491	)		638			(149,078	)
Financing activities
Issuance of long term debt		554,001			—			110,743			(108,191	)		556,553
Repayments of long term debt		(361,383	)		14,979			(559	)		—			(346,963	)
Other		(242,829	)		23,690			58,634			108,191			(52,314	)
Net cash provided by (used in) financing activities		(50,211	)		38,669			168,818			—			157,276
Increase in cash and equivalents		173,133			4,266			106			—			177,505
Cash and equivalents at beginning of period		430			6,362			2,216			—			9,008
Cash and equivalents at end of period	$	173,563		$	10,628		$	2,322		$	—		$	186,513

For the Year Ended, December 31, 2009	Parent			Guarantors			Combined Non-Guarantors			Consolidating Adjustments			Total Consolidated
Net cash provided by (used in) operating activities	$	261,605		$	176,382		$	(38,811	)	$	46,380		$	445,556
Net cash provided by (used in) investing activities		(77,069	)		(71,998	)		(227,459	)		2,581			(373,945	)
Financing activities
Issuance of long term debt		1,219,500			—			227,831			(178,896	)		1,268,435
Repayments of long term debt		(1,699,972	)		9,486			(71	)		—			(1,690,557	)
Other		294,977			(119,022	)		37,396			129,935			343,286
Net cash provided by (used in) financing activities		(185,495	)		(109,536	)		265,156			(48,961	)		(78,836	)
Decrease in cash and equivalents		(959	)		(5,152	)		(1,114	)		—			(7,225	)
Cash and equivalents at beginning of period		1,389			11,514			3,330			—			16,233
Cash and equivalents at end of period	$	430		$	6,362		$	2,216		$	—		$	9,008