10-K

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

_____________________________________________________________ 

FORM 10-K

x ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(D) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended January 31, 2012

or

¨ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(D) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from              to             

Commission File Number: 0-14338

_____________________________________________________________  

AUTODESK, INC.

(Exact name of registrant as specified in its charter)

Delaware	94-2819853
(State or other jurisdiction of incorporation or organization)	(I.R.S. employer Identification No.)
111 McInnis Parkway, San Rafael, California	94903
(Address of principal executive offices)	(Zip Code)

Registrant’s telephone number, including area code: (415) 507-5000

 _____________________________________________________________ 

Securities registered pursuant to Section 12(b) of the Act:

Title of each class	Name of each exchange on which registered
Common Stock, $0.01 Par Value	The NASDAQ Stock Market LLC (NASDAQ Global Select Market)

Securities registered pursuant to Section 12(g) of the Act: None

_____________________________________________________________ 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  x    No  ¨

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Securities Exchange Act of 1934 (“Exchange Act”).    Yes  ¨    No  x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Exchange Act during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  x  No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.    x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer  x Accelerated filer  o Non-accelerated filer o Smaller reporting company o

Indicate by check mark whether the registrant is a shell company (as defined by Rule 12b-2 of the Exchange Act).    Yes  ¨    No  x

As of July 31, 2011, the last business day of the registrant’s most recently completed second fiscal quarter, there were approximately 227.9 million shares of the registrant’s common stock outstanding that were held by non-affiliates, and the aggregate market value of such shares held by non-affiliates of the registrant (based on the closing sale price of such shares on the NASDAQ Global Select Market on July 29, 2011, the last trading day of our second fiscal quarter) was approximately $7.8 billion. Shares of the registrant’s common stock held by each executive officer and director have been excluded in that such persons may be deemed to be affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes.

As of February 29, 2012, registrant had outstanding approximately 227.3 million shares of common stock.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the Proxy Statement for registrant’s Annual Meeting of Stockholders (the “Proxy Statement”), are incorporated by reference in Part III of this Form 10-K to the extent stated herein. The Proxy Statement will be filed within 120 days of the registrant’s fiscal year ended January 31, 2012.

1

AUTODESK, INC. FORM 10-K

TABLE OF CONTENTS

		Page
PART I
Item 1.	Business	4
Item 1A.	Risk Factors	13
Item 1B.	Unresolved Staff Comments	22
Item 2.	Properties	23
Item 3.	Legal Proceedings	23
Item 4.	Mine Safety Disclosures	23
PART II
Item 5.	Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities	24
Item 6.	Selected Financial Data	26
Item 7.	Management’s Discussion and Analysis of Financial Condition and Results of Operations	27
Item 7A.	Quantitative and Qualitative Disclosures About Market Risk	46
Item 8.	Financial Statements and Supplementary Data	47
Item 9.	Changes in and Disagreements With Accountants on Accounting and Financial Disclosure	82
Item 9A.	Controls and Procedures	82
Item 9B.	Other Information	82
PART III
Item 10.	Directors, Executive Officers and Corporate Governance	83
Item 11.	Executive Compensation	84
Item 12.	Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters	84
Item 13.	Certain Relationships and Related Transactions, and Director Independence	84
Item 14.	Principal Accounting Fees and Services	84
PART IV
Item 15.	Exhibits and Financial Statement Schedules	85
	Signatures	86

3

FORWARD-LOOKING INFORMATION

The discussion in this Annual Report on Form 10-K contains trend analyses and other forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934. Forward-looking statements are any statements that look to future events and consist of, among other things, our business strategies; anticipated future financial results; our belief that the strength of our channel network, technological leadership, brand recognition, breadth of product line and large installed base are benefitting us as global economies recover; expected trends in certain financial metrics; expected market trends, including the growth of cloud, mobile and social computing; our ability to successfully expand adoption of our products, our ability to gain market acceptance of new businesses and sales initiatives, and our ability to successfully increase sales of product suites as part of our overall sales strategy; our belief that emerging economies continue to present long-term growth opportunities for us; the impact of our restructuring activities; the sufficiency of our cash to meet our working capital and operating resource expenditure requirements over the next 12 months and our ability to generate sufficient future taxable income in appropriate tax jurisdictions to realize our net deferred tax assets. In addition, forward-looking statements also consist of statements involving expectations regarding product acceptance, activity related to our stock repurchase program, and short-term and long-term cash requirements, as well as, statements involving trend analyses and statements including such words as “may,” “believe,” “could,” “anticipate,” “would,” “might,” “plan,” “expect,” and similar expressions or the negative of these terms or other comparable terminology. These forward-looking statements speak only as of the date of this Annual Report on Form 10-K and are subject to business and economic risks. As such, our actual results could differ materially from those set forth in the forward-looking statements as a result of a number of factors, including those set forth below in Item 1A, “Risk Factors,” and in our other reports filed with the U.S. Securities Exchange Commission. We assume no obligation to update forward-looking statements to reflect events that occur or circumstances that exist after the date on which they were made.

PART I

ITEM 1. BUSINESS

Note: A glossary of terms used in this Form 10-K appears at the end of this Item 1.

GENERAL

We are a world leading design software and services company, offering customers productive business solutions through powerful technology products and services. We serve customers in the architecture, engineering and construction; manufacturing; and digital media and entertainment industries. Our sophisticated software products enable our customers to experience their ideas before they are real by allowing them to imagine, design and create their ideas and to visualize, simulate and analyze real-world performance early in the design process by creating digital prototypes. These capabilities allow our customers to optimize and improve their designs, help save time and money, improve quality and foster innovation. Our software products are sold globally, both directly to customers and through a network of resellers and distributors.

Segments

We are organized into four reportable operating segments:

• Platform Solutions and Emerging Business (“PSEB”), which accounted for 38% of our net revenue in fiscal 2012,

• Architecture, Engineering and Construction (“AEC”), which accounted for 28% of our net revenue in fiscal 2012,

• Manufacturing (“MFG”), which accounted for 24% of our net revenue in fiscal 2012; and,

• Media and Entertainment (“M&E”), which accounted for 10% of our net revenue in fiscal 2012.

A summary of our net revenue and results of operations for our business segments is found in Note 13, “Segments,” in the Notes to our Consolidated Financial Statements.

Our PSEB, AEC and MFG segments derive revenue from the sale of licenses for software products and services to customers who design, build, manage or own building, manufacturing and infrastructure projects. In addition to software products, the PSEB, AEC and MFG segments offer a range of services including consulting, support and training, largely dedicated to enhancing our ability to sell licenses to our software products. Our M&E segment derives revenue from the sale of licenses of software products to creative professionals, post-production facilities, and broadcasters for a variety of applications, including feature films, television programs, commercials, music and corporate videos, interactive game production, web design and interactive web streaming. In addition, our animation products produced by our M&E segment are often used by customers of products from our other segments for the visualization of their designs.

4

The principal products and services of these segments include the following:

• Flagship products, which accounted for approximately 58% of our net revenue in fiscal 2012, are our core standalone horizontal, vertical and model-based design products including AutoCAD, AutoCAD LT, AutoCAD Civil 3D, AutoCAD Mechanical, AutoCAD Architecture, Autodesk 3ds Max and Autodesk Maya.

• Suites, which accounted for approximately 27% of our net revenue in fiscal 2012, are a combination of products that target a specific user objective (product design, building design, etc.) and support a set of workflows for that objective, including Autodesk Product Design Suites, Autodesk Building Design Suites, Autodesk Educational Suites and Autodesk Entertainment Creation Suites.

• New and Adjacent products, which accounted for approximately 16% of our net revenue in fiscal 2012, are new product offerings as well as products that are not considered flagship or suites including Autodesk Creative Finishing products, Autodesk Moldflow products, Autodesk Navisworks products and Autodesk Robot Structural Analysis.

Corporate Information

We were incorporated in California in April 1982 and were reincorporated in Delaware in May 1994. Our principal executive office is located at 111 McInnis Parkway, San Rafael, California 94903 and the telephone number at that address is (415) 507-5000. Our internet address is www.autodesk.com. The information posted on our website is not incorporated into this Annual Report on Form 10-K. Our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and amendments to reports filed or furnished pursuant to Sections 13(a) and 15(d) of the Securities Exchange Act of 1934, as amended, are available free of charge on the Investor Relations portion of our web site at www.autodesk.com as soon as reasonably practicable after we electronically file such material with, or furnish it to, the SEC.

PRODUCTS

The principal product offerings from Autodesk’s different segments are as follows:

PSEB

Our PSEB segment includes our design product, AutoCAD. Our AutoCAD product is a platform product that underpins our design product offerings for all the industries we serve. For example, our AEC and MFG segments offer tailored versions of AutoCAD software for the industries they serve. Our AutoCAD product also provides a platform for our developer partners to build custom solutions for a range of diverse design-oriented markets. PSEB’s revenue primarily includes revenue from sales of licenses of our design products, AutoCAD and AutoCAD LT, as well as the Autodesk Design Suite and many other design and consumer products. The segment’s principal product offerings included the following during fiscal 2012:

•AutoCAD

AutoCAD software, which is our largest revenue-generating product, is a customizable and extensible computer-aided design (CAD) application for professional design, drafting, detailing, and visualization. AutoCAD software provides digital tools that can be used independently and in conjunction with other specific applications in fields ranging from construction to manufacturing, civil engineering and process plant design.

• AutoCAD LT

AutoCAD LT software is purpose built for professional drafting and detailing. AutoCAD LT includes document sharing capability without the need for software customization or certain advanced functionality found in our AutoCAD product. Users can share all design data with team members who use our AutoCAD product or other Autodesk products built on AutoCAD. AutoCAD LT software is our second largest revenue-generating product.

AEC

Our AEC software products help to improve the way building, civil infrastructure, process plant and construction projects are designed, built and managed. A broad portfolio of solutions enables greater efficiency, accuracy and sustainability across the entire project lifecycle. Our AEC solutions include advanced technology for building information modeling (“BIM”), AutoCAD-based design and documentation productivity software, sustainable design analysis applications, collaboration and project management solutions. BIM, an integrated process for building and infrastructure design, analysis, documentation and construction, uses consistent, coordinated information to improve communication and collaboration between the extended project team. AEC provides a comprehensive portfolio of BIM solutions that help customers deliver projects faster and more economically, while minimizing environmental impact. The segment’s principal product offerings included the following during fiscal 2012:

5

• Autodesk Revit

Purpose-built for BIM, the Autodesk Revit products collect information about a building project and allow this information to be coordinated across all other representations of the project, so that every drawing sheet, 2D and 3D view and schedule is based on internally consistent and complete information from the same underlying building database. The Autodesk Revit products, including AutoCAD Revit Architecture Suite, AutoCAD Revit MEP Suite and AutoCAD Revit Structure Suite, provide an intuitive sophisticated model-based design and documentation system for architects; mechanical, electrical and plumbing (MEP) engineers; structural engineers; design-build teams; and other design and building industry professionals.

• AutoCAD Civil 3D

AutoCAD Civil 3D products provide a surveying, design, analysis, and documentation solution for civil engineering, including land development, transportation, and environmental projects. Using a model-centric approach that automatically updates documentation as design changes are made, AutoCAD Civil 3D products enable civil engineers, designers, drafters, and surveyors to significantly boost productivity and deliver higher-quality designs and construction documentation faster. With AutoCAD Civil 3D products, the entire project team works from the same consistent, up-to-date model so they stay coordinated throughout all project phases.

• AutoCAD Architecture

Designed for architects and built on the AutoCAD platform, AutoCAD Architecture software includes powerful Architecture industry-specific tools to gain efficiency and improve coordination.

• AutoCAD Map 3D

AutoCAD Map 3D software provides direct access to data needed for infrastructure planning, design and management activities. AutoCAD Map 3D software helps professionals working on transportation, land development, water, and power projects to more easily create, manage and analyze design geographic information system (“GIS”) and asset data.

MFG

Our MFG segment provides manufacturers in automotive and transportation, industrial machinery, consumer products and building products with comprehensive digital prototyping solutions that bring together design data from all phases of the product development process to develop a single digital model created in Autodesk Inventor software. Our solutions for digital prototyping are scalable, attainable, cost-effective and allow for real-world simulation, enabling a broad group of manufacturers to realize benefits with minimal disruption to existing workflows. MFG’s principal product offerings included the following during fiscal 2012:

• Autodesk Inventor

Autodesk Inventor allows manufacturers to go beyond 3D design to digital prototyping by giving engineers a comprehensive and flexible set of tools for 3D mechanical design, simulation, analysis, tooling, visualization and documentation. With Autodesk Inventor, engineers can integrate AutoCAD drawings and model-based design data into a single digital model, creating a virtual representation of a final product that enables them to validate the form, fit, and function of the product before it is ever built. Digital prototyping with Autodesk Inventor enables manufacturers to design, visualize, and simulate products digitally, helping them to build better products, reduce development costs, and get to market faster.

• AutoCAD Mechanical

AutoCAD Mechanical software is purpose-built to accelerate the mechanical design process. AutoCAD Mechanical software offers users significant productivity gains and helps save hours of design time by including all the functionality of AutoCAD software, plus comprehensive libraries of standards-based parts and tools for automating common design tasks.

• Autodesk Moldflow

The Autodesk Moldflow family of injection molding simulation software provides tools that help manufacturers optimize the design of plastic parts and injection molds, and study the injection molding process.

M&E

Our M&E segment is comprised of two product groups: Animation and Creative Finishing. Animation products are sold as software only and provide tools for digital sculpting, modeling, animation, effects, rendering, and compositing for design visualization, visual effects and games production. Creative Finishing products are primarily sold as turnkey solutions for

6

editing, finishing and visual effects design, and color grading. Principal product offerings in our M&E segment’s Animation and Creative Finishing product groups included the following during fiscal 2012:

Animation

• Autodesk 3ds Max

Autodesk 3ds Max software provides 3D modeling, animation and rendering solutions that enable game developers, design visualization professionals and visual effects artists to digitally create realistic images, animations and complex scenes and to digitally communicate abstract or complex mechanical, architectural, engineering and construction concepts.

• Autodesk Maya

Autodesk Maya software provides 3D modeling, animation, effects, rendering and compositing solutions that enable film and video artists, game developers and design visualization professionals to digitally create engaging, lifelike images, realistic animations and simulations, and extraordinary visual effects.

Creative Finishing

• Autodesk Flame, Autodesk Smoke, Autodesk Lustre and Autodesk Flare

Autodesk Flame software is an interactive real-time design, finishing, grading and visual effects solution for supervised post-production. Autodesk Smoke software is a non-linear and non-compressed online editing, effects and finishing software application and is used in commercials, music videos, corporate video, film as well as broadcast design projects. Autodesk Lustre software is a high-performance color grading solution used by artists for creative look development and final color and lighting effects for both film and television. Autodesk Flare software is a software solution that offers the compositing capabilities of Flame contributing to faster project completion.

Design and Creation Suites

In addition to the principal product segment offerings above, we also offer design and creation suites that combine multiple products across segments.  Our new design and creation suites were introduced during the second quarter of fiscal 2012 and provide comprehensive workflows for specific needs in building design, product design, entertainment creation and more. These compatible sets of tools offer interoperability and capabilities that leverage the familiarity of our leading design and visualization solutions, in a single economical and convenient package. Our new design and creation suites include the following product classes: Autodesk Design Suites, Building Design Suites, Entertainment Creation Suites, Factory Design Suites, Infrastructure Design Suites, Plant Design Suites and Product Design Suites.

PRODUCT DEVELOPMENT AND INTRODUCTION

The technology industry is characterized by rapid technological change in computer hardware, operating systems and software. In addition, our customers’ requirements and preferences rapidly evolve, as do their expectations of the performance of our software. To keep pace with these changes, we maintain a vigorous program of new product development to address demands in the marketplace for our products. We dedicate considerable technical and financial resources to research and development to further enhance our existing products and to create new products and technologies. Research and development expenditures were $566.5 million or 26% of fiscal 2012 net revenue, $496.2 million or 25% of fiscal 2011 net revenue and $457.5 million or 27% of fiscal 2010 net revenue. Our software is primarily developed internally; however, we also use independent firms and contractors to perform some of our product development activities. Additionally, we acquire products or technology developed by others by purchasing or licensing products and technology from third parties. We continually review these investments in an effort to ensure that we are generating sufficient revenue or gaining a competitive advantage to justify their costs.

The majority of our research and product development is performed in the United States, China, Singapore and Canada. However, we employ experienced software developers in many of our other locations. Translation and localization of our products are performed in a number of local markets, principally Singapore and Switzerland. We generally localize and translate our products into German, French, Italian, Spanish, Russian, Japanese, Korean and simplified and traditional Chinese.

We plan to continue to manage significant product development operations internationally over the next several years. We believe that our ability to conduct research and development at various locations throughout the world allows us to optimize product development, lower costs, and integrate local market knowledge into our development activities. We continually assess the significant costs and challenges, including intellectual property protection, against the benefits of our international development activities.

7

In addition, our business and our customers benefit from our relationships with a network of over 3,600 third-party developers who develop and sell their own products that further enhance the range of integrated solutions available to our customers.

For further discussion regarding risks from our product development and introduction efforts, see Item 1A, “Risk Factors.”

MARKETING AND SALES

We license or sell our products and services globally, primarily through indirect channels consisting of distributors and resellers. To a lesser extent we also transact directly with customers who are primarily large corporations. Our indirect channel model includes both a two-tiered distribution structure, where distributors sell to resellers, and a one-tiered structure, where Autodesk sells directly to resellers. We have a network of approximately 2,000 resellers and distributors worldwide. For fiscal 2012, approximately 84% of our revenue was derived from indirect channel sales through distributors and resellers, and we expect that the majority of our revenue will continue to be derived from indirect channel sales in the future. We employ a variety of incentive programs and promotions to align our reseller channel with our business strategies. Sales through our largest distributor, Tech Data Corporation and its affiliates, accounted for 17%, 16% and 14% of our net revenue for fiscal years 2012, 2011 and 2010, respectively. On October 27, 2011, Tech Data purchased certain assets of Mensch and Maschine Software (“MuM”), which has been a distributor of our products in Europe. The acquisition concentrates additional sales through Tech Data, which on a consolidated basis would have accounted for 21%, 22% and 21% of our net revenue for fiscal years 2012, 2011 and 2010, if the acquisition had taken place at the beginning of fiscal 2010. We believe our business is not substantially dependent on Tech Data, including following the acquisition of certain assets of MuM. Our customers through Tech Data are the resellers and end users who purchase our software licenses and services. Should any of the agreements between us and Tech Data be terminated for any reason, we believe the resellers and end users who currently purchase our products through Tech Data would be able to continue to do so under substantially the same terms from one of our many other distributors without substantial disruption to our revenue. No other distributor or reseller accounted for 10% or more of our revenue.

Our customer-related operations are divided into three geographic regions, the Americas; Europe, Middle East and Africa (“EMEA”); and Asia Pacific (“APAC”). Each geographic region is supported by global marketing and sales organizations. These organizations develop and manage overall marketing and sales programs and work closely with a network of domestic and international sales offices. Fiscal 2012 net revenue in the Americas, EMEA and APAC was $798.5 million, $862.2 million and $554.9 million, respectively. We intend to continue to make our products available in foreign languages. We believe that international sales will continue to comprise the majority of our total net revenue. Adverse economic conditions in the countries that contribute a significant portion of our net revenue may have an adverse effect on our business in those countries and our overall financial performance. A summary of our financial information by geographic location is found in Note 13, “Segments,” in the Notes to Consolidated Financial Statements. Our international operations and sales subject us to a variety of risks; see Item 1A, “Risk Factors,” for further discussion.

We also work directly with reseller and distributor sales organizations, computer manufacturers, other software developers and peripherals manufacturers in cooperative advertising, promotions and trade-show presentations. We employ mass-marketing techniques such as webcasts, seminars, telemarketing, direct mailings, advertising in business and trade journals and social media. We have a worldwide user group organization and we have created online user communities dedicated to the exchange of information related to the use of our products.

In addition to sales of new software licenses, we generate revenue through our maintenance program and upgrade pricing options. These choices are available for a majority of our products and offer our customers two alternative means of migrating to the most recent version of our products.

Under the maintenance program, known by our user community as the Autodesk Subscription Program, customers who own a perpetual use license for the most recent version of the underlying product are able to purchase maintenance that provides them with unspecified upgrades when-and-if-available and are able to download e-Learning courses and receive online support over a one year or multi-year maintenance service period. Revenue from our maintenance program is reported separately on our Consolidated Statements of Operations and is referred to throughout this document as maintenance revenue.

Upgrade pricing offers customers who are not on our maintenance program an opportunity to purchase upgrades to the most current version of the same product for an incremental fee at current available prices, but only to the extent that they are still on an Autodesk-supported version of our product. An upgrade also includes a crossgrade where a customer pays an incremental fee at currently available prices toward the purchase of a different product, which generally has a higher price. The cost of an upgrade is less than the cost of purchasing a new license. During fiscal 2012, customers could upgrade from software that is three versions prior to the latest version available or newer at a percentage of a full license; the license of the previous version of the product is terminated. Revenue from upgrades are reported on our Consolidated Statements of Operations in

8

“License and other.”

Our ability to effectively distribute our products depends in part upon the financial and business condition of our distributor and reseller networks. The loss of, or a significant reduction in, business with any one of our major distributors or large resellers could harm our business; see Item 1A, “Risk Factors,” for further discussion.

CUSTOMER AND RESELLER SUPPORT

We provide technical support and training to customers through a leveraged support model, augmented by direct programs designed to address certain specific needs. Our customers rely primarily on the resellers and distributors from which they purchased licenses to our products for technical support; however, we do provide certain direct support for some of our customers. We support our resellers and distributors through technical product training, sales training classes, the Internet and telephone. We also provide online support directly to our customers through our maintenance program. There are also a number of user group forums in which customers are able to share information.

EDUCATIONAL PROGRAMS

We offer education programs and specially priced software licensing options tailored for educational institutions, students, and faculty to train the next generation of users. We also offer classroom support, including standardized curricula developed by educators, instructor development, and a rich assortment of online learning resources. Users are trained on our products at educational institutions, reducing the cost of training for our customers.

DEVELOPER PROGRAMS

One of our key strategies is to maintain an open-architecture design of our software products to facilitate third-party development of complementary products and industry-specific software solutions. This approach enables customers and third parties to customize solutions for a wide variety of highly specific uses. We offer several programs that provide marketing, sales, technical support and programming tools to developers who develop add-on applications for our products. Over 3,600 developers in the Autodesk Developer Network create interoperable products that further enhance the range of integrated solutions available to our customers.

COMPETITION

The markets for our products are highly competitive and subject to rapid change. We strive to increase our competitive separation by investing in research and development, allowing us to bring new products to market and create exciting new versions of existing products that offer compelling efficiencies for our customers. We also compete through investments in marketing and sales to more effectively reach new customers and better serve existing customers.

Our competitors range from large, global, publicly traded companies to small, geographically focused firms to solutions produced in-house by their users. Our primary global competitors in these segments include Adobe Systems Incorporated, ANSYS, Inc., Bentley Systems, Incorporated, Dassault Systèmes S.A. and its subsidiary Dassault Systèmes SolidWorks Corp., Environmental Systems Research Institute, Inc. (ESRI), Google Inc., Intergraph Corporation, a wholly owned subsidiary of Hexagon AB, Nemetschek AG, Parametric Technology Corporation, Siemens Product Lifecycle Software, Inc., and Trimble Navigation Limited.

Our M&E segment also competes with a wide range of different companies from large, global, publicly-traded companies to small private entities. Large organizations that produce products that compete in some or all of our markets include Adobe Systems Incorporated, Apple Inc., Avid Technology, Inc., SONY Corporation and Thomson, among others. The media and entertainment market is highly fragmented with complex interdependencies between many of the larger businesses. As a result, some of our competitors also own subsidiaries that are our customers or our partners in developing or bringing to market some of our solutions. In addition to traditional competitors in developed economies, we encounter new competitors in emerging economies.

The software industry has limited barriers to entry, and the availability of computing power with continually expanding performance at progressively lower prices contributes to the ease of market entry. The design software market is characterized by vigorous competition in each of the vertical markets in which we compete, both from existing competitors and by entry of competitors with innovative technologies. Competition is increasingly enhanced by consolidation of companies with complementary products and technologies and the possibility that competitors in one vertical segment may enter other vertical segments that we serve. In addition, some of our competitors in certain markets have greater financial, technical, sales and marketing and other resources than we do. Because of these and other factors, competitive conditions in these industries are likely to continue to intensify in the future. Increased competition could result in price reductions, reduced net revenue and

9

profit margins and loss of market share, any of which could harm our business. See Item 1A, “Risk Factors,” for further discussion of risks regarding competition.

We believe that our future results depend largely upon our abilities to better serve customers by offering new products, whether by internal development or acquisition, and to continue to provide existing product offerings that compete favorably with respect to ease of use, reliability, performance, range of useful features, continuing product enhancements, reputation, price and training.

INTELLECTUAL PROPERTY AND LICENSES

We maintain an active program to legally protect our investment in technology through intellectual property rights. We protect our intellectual property through a combination of patent, copyright, trademark and trade secret protections, confidentiality procedures and contractual provisions. The nature and extent of legal protection associated with each such intellectual property right depends on, among other things, the type of intellectual property right and the given jurisdiction in which such right arises. We believe that our intellectual property rights are valuable and important to our business, including each of our segments.

Nonetheless, our intellectual property rights may not be successfully asserted in the future or may be invalidated, circumvented or challenged. In addition, the laws of various foreign countries where our products are distributed do not protect our intellectual property rights to the same extent as U.S. laws. Enforcement of intellectual property rights against alleged infringers can sometimes lead to costly litigation and counterclaims. Our inability to protect our proprietary information could harm our business.

From time to time, we receive claims alleging infringement of a third party’s intellectual property rights, including patents. Disputes involving our intellectual property rights or those of another party have in the past and may in the future lead to, among other things, costly litigation or product shipment delays, which could harm our business.

We retain ownership of software we develop. All software is licensed to users and primarily provided in object code pursuant to either shrink-wrap, embedded or on-line licenses, or signed license agreements. These agreements contain restrictions on duplication, disclosure and transfer.

We believe that because of the limitations of laws protecting our intellectual property and the rapid, ongoing technological changes in both the computer hardware and software industries, we must rely principally upon software engineering and marketing skills to maintain and enhance our competitive market position.

While we have recovered some revenue resulting from the unauthorized use of our software products, we are unable to measure the full extent to which piracy of our software products exists. We believe, however, that software piracy is and can be expected to be a persistent problem that negatively impacts our revenue and financial results.

In addition, through various licensing arrangements, we receive certain rights to intellectual property of others. We expect to maintain current licensing arrangements and to secure licensing arrangements in the future, as needed and to the extent available on reasonable terms and conditions, to support continued development and sales of our products and services. Some of these licensing arrangements require or may require royalty payments and other licensing fees. The amount of these payments and fees may depend on various factors, including but not limited to: the structure of royalty payments, offsetting considerations, if any, and the degree of use of the licensed technology.

See Item 1A, “Risk Factors,” for further discussion of risks related to protecting our intellectual property.

PRODUCTION AND SUPPLIERS

Production of our PSEB, AEC, MFG and certain M&E software products involves duplication of the software media and, for certain products, the printing of user manuals. The purchase of media and the transfer of the software programs onto media for distribution to customers are performed by us and by licensed subcontractors. Media for our products such as DVDs and USB flash drives are available from multiple sources. We offer our maintenance customers an electronic software download option for selected product updates. Customers who choose electronic fulfillment receive the latest version of the software from our vendor’s secure servers. For certain products, user manuals are made available by request only as we work toward reducing our cost of shipping and production as well as the use of natural resources. User manuals and packaging materials are produced to our specifications by outside sources. Production is either performed in leased facilities operated by us or by independent third-party contractors. To date, we have not experienced any material difficulties or delays in the production of our software and documentation.

10

EMPLOYEES

As of January 31, 2012, we employed approximately 7,500 people. None of our employees in the United States are represented by a labor union; however, in certain foreign countries, our employees are represented by work councils. We have never experienced any work stoppages and believe our employee relations are good. Reliance upon employees in other countries entails various risks and changes in these foreign countries, such as government instability or regulation unfavorable to foreign-owned businesses, could negatively impact our business in the future.

ACQUISTIONS

Over the past three years, we acquired new technology or supplemented our technology by purchasing businesses or certain technology related assets focused in specific markets or industries. For the three years ended January 31, 2012, 2011 and 2010, we acquired a number of companies and certain technology related assets, some of which were accounted for as business combinations. The following acquisitions have had a significant impact on our business:

Date of closing	Company	Details
December 2011	T-Splines, Inc. ("T-Splines")	The T-Splines acquisition strengthens our Digital Prototyping portfolio with more flexible free-form modeling and will help achieve closer integration between industrial design and engineering workflows. T-Splines has been integrated into, and the related goodwill was assigned to the MFG segment.
October 2011	Micro Application Packages Limited ("MAP")	The MAP acquisition expands our portfolio for MEP contractors and fabricators by providing tools for the manufacturing, fabrication and installation of MEP systems. MAP has been integrated into, and the related goodwill was assigned to the AEC segment.
August 2011	Turbo Squid, Inc. (“Turbo Squid”)	The acquisition of certain technology assets from Turbo Squid strengthens our online marketplace platform for our design application users.
August 2011	Instructables, Inc. ("Instructables")	The Instructables acquisition assists makers of all types by linking Instructables' vibrant online community to our software tools and services, such as SketchBook, 123D and Homestyler that allow anyone to explore design ideas and bring them to life. Instructables has been integrated into, and the related goodwill was assigned to the PSEB segment.
March 2011	Blue Ridge Numerics, Inc. ("Blue Ridge")	The Blue Ridge acquisition broadens our solution for Digital Prototyping to provide customers with a spectrum of computational fluid dynamics (CFD) capabilities that help automate fluid flow and thermal simulation decision-making for designs, while eliminating costly physical prototyping cycles. Blue Ridge has been integrated into, and the related goodwill was assigned to the MFG segment.
March 2011	Scaleform Corporation ("Scaleform")	The Scaleform acquisition furthers Autodesk's ability to provide customers with more complete workflows to more rapidly develop immersive 3D and casual game experiences. Scaleform has been integrated into, and the related goodwill was assigned to the M&E segment.
November 2009	PlanPlatform Ltd. (“PlanPlatform”)	The PlanPlatform acquisition accelerates our software as a service technology platform and provided a design team with knowledge of web-based design applications. PlanPlatform has been integrated into, and the related goodwill was assigned to the PSEB segment.

BACKLOG

We have historically reported backlog as consisting of software license product orders that have not yet shipped, and deferred revenue consisting primarily of deferred maintenance revenue from our maintenance program. We no longer consider deferred revenue as part of backlog. For further discussion of deferred revenue, see the Maintenance Revenue section of Part II, Item 7, “Management's Discussion and Analysis of Financial Condition and Results of Operations.”

We typically ship products shortly after receipt of an order, which is common in the software industry. Our backlog is primarily comprised of current software license product orders which have not yet shipped. The category of current software license product orders which we have not yet shipped consists of orders from customers with approved credit status for currently available software products and may include both orders with current ship dates and orders with ship dates beyond the current fiscal period.

Backlog was $27.1 million at January 31, 2012 compared to $27.5 million at January 31, 2011. The actual amount of backlog at any particular time may not be a meaningful indicator of future business prospects as this amount is impacted by a number of factors not related to future trends or events such as the order fulfillment process, the method of software delivery or the linearity of our business within the fiscal period.

11

GLOSSARY OF TERMS

BIM (Building Information Modeling)—BIM describes a model-based technology linked with a database of project information, and is the process of generating and managing information throughout the life cycle of a building. BIM is used as a digital representation of the building process to facilitate exchange and interoperability of information in digital formats.

Constant currency growth rates—We attempt to represent the changes in the underlying business operations by eliminating fluctuations caused by changes in foreign currency exchange rates as well as eliminating hedge gains or losses recorded within the current and comparative period. Our constant currency methodology removes all hedging gains and losses from the calculation.

Digital prototyping—Digital prototyping allows designers, architects and engineers to analyze, simulate and visualize a design using a digital or virtual model rather than a physical model.

Flagship—Autodesk flagship products are our core design products. Flagship includes the following products: 3ds Max, AutoCAD, AutoCAD LT, AutoCAD vertical products (such as AutoCAD Architecture and AutoCAD Mechanical), Civil 3D, Maya, Plant 3D, and Revit products (standalone).

New and Adjacent—Autodesk new and adjacent products include Autodesk's new product offerings as well as products that are not included in flagship or suites. New and adjacent includes the following services and products: Autodesk Alias Design products, Autodesk Consulting, Autodesk Buzzsaw, Autodesk Constructware, Autodesk consumer products, Autodesk Creative Finishing products, Autodesk Moldflow products, Autodesk Navisworks, Autodesk Simulation, Autodesk Vault products and all other products.

Suites—Autodesk design suites are a combination of products that target a specific user objective (product design, building design, etc.) and support a set of workflows for that objective. Our new design and creation suites include: Autodesk Design Suite, Autodesk Building Design Suite, Autodesk Entertainment Creation Suite, Autodesk Factory Design Suite, Autodesk Infrastructure Design Suite, Autodesk Plant Design Suite, and Autodesk Product Design Suite. Our previously established suites include: Autodesk Inventor family suites, Autodesk Revit family suites, and education solutions suites.

Upgrade—Upgrades allow customers to pay an incremental fee at currently available prices toward the purchase of the latest version of the same product. Upgrades are available only for licenses of software that are up to three versions prior to the latest version available; an upgrade terminates the license to the previous version of the product. A similar exchange and termination of a previous version of a product that is four versions prior to the latest version available, is recorded as commercial new revenue. Upgrades also includes crossgrades where a customer pays an incremental fee at currently available prices toward the purchase of a different product; the license to the previous product is terminated.

12

ITEM 1A. RISK FACTORS

We operate in a rapidly changing environment that involves significant risks, a number of which are beyond our control. In addition to the other information contained in this Form 10-K, the following discussion highlights some of these risks and the possible impact of these factors on our business, financial condition and future results of operations. If any of the following risks actually occur, our business, financial condition or results of operations may be adversely impacted, causing the trading price of our common stock to decline. In addition, these risks and uncertainties may impact the “forward-looking” statements described elsewhere in this Form 10-K and in the documents incorporated herein by reference. They could affect our actual results of operations, causing them to differ materially from those expressed in “forward-looking” statements.

Current global economic uncertainty may impact our business, financial results and financial condition.

As our business has expanded globally, we have increasingly become subject to risks arising from adverse changes in global economic and political conditions. The past several years have been characterized by weak global economic conditions, a tightening in the credit markets, high unemployment, a low level of liquidity in many financial markets, increased government deficit spending and debt levels, uncertainty about certain governments' abilities to repay such debt and extreme volatility in many financial instrument markets. Although some of these conditions appear to be abating there are a number of mixed indicators and it is not yet clear whether a sustainable recovery is occurring or a renewed slow-down is taking place.

Over the past several years, many of our customers have experienced tighter credit, negative financial news and weaker financial performance of their businesses and have reduced their workforces, thereby reducing the number of licenses and the number of maintenance contracts they purchase from us. In addition, a number of our customers rely, directly and indirectly, on government spending. Current debt balances of many countries without proportionate increases in revenues has caused many countries to reduce spending and in some cases has forced those countries to restructure their debt in an effort to avoid defaulting under those obligations. This has not only impacted those countries but others that are holders of such debt and those assisting in such restructuring.

These actions may impact, and over the past several years have negatively impacted, our business, financial results and financial condition. In addition, these factors may cause, and over the past several years have caused, us to restructure our business and in turn incur restructuring charges as well as take impairment charges on some of our long-term assets. In addition, the improvement of our financial performance over the past several fiscal quarters may be negatively impacted by:

• lack of credit available to and the insolvency of key channel partners, impairing our distribution channels and cash flows;

• counterparty failures negatively impacting our treasury functions, including timely access to our cash reserves and third-party fulfillment of hedging transactions;

• counterparty failures negatively affecting our insured risks;

• inability of banks to honor our existing line of credit, which could increase our borrowing expenses or eliminate our ability to obtain short-term financing; and

• decreased borrowing and spending by our end users on small and large projects in the industries we serve, thereby reducing demand for our products.

Existing and increased competition and rapidly evolving technological changes may reduce our net revenue and profits.

The software industry has limited barriers to entry, and the availability of computing devices with continually expanding performance at progressively lower prices contributes to the ease of market entry. The markets in which we compete are characterized by vigorous competition, both by entry of competitors with innovative technologies and by consolidation of companies with complementary products and technologies. In addition, some of our competitors in certain markets have greater financial, technical, sales and marketing and other resources. Furthermore, a reduction in the number and availability of compatible third-party applications, or our inability to rapidly adapt to technological and customer preference changes, including those related to cloud computing, mobile devices, and new computing platforms, may adversely affect the sale of our products. Because of these and other factors, competitive conditions in the industry are likely to intensify in the future. Increased competition could result in price reductions, reduced net revenue and profit margins and loss of market share, any of which would likely harm our business.

We believe that our future results depend largely upon our ability to offer products that compete favorably with respect to reliability, performance, ease of use, range of useful features, continuing product enhancements, reputation and price.

13

Our financial results fluctuate within each quarter and from quarter to quarter making our future revenue and financial results difficult to predict.

Our quarterly financial results have fluctuated in the past and may do so in the future. These fluctuations could cause our stock price to change significantly or experience declines. In addition to the other factors described in this Part I, Item 1A, some of the factors that could cause our financial results to fluctuate include:

• general market, economic, business and political conditions, including the impact of sales in particular geographies, including emerging economies,

• the ability of governments around the world to meet their financial and debt obligations, and finance infrastructure projects,

• lower growth or contraction of our upgrade or maintenance programs,

• fluctuations in foreign currency exchange rates and the success of our hedging activity,

• failure to expand our AutoCAD and AutoCAD LT products customer base to related design products,

• the timing of the introduction of new products by us or our competitors,

• the success of new business or sales initiatives and increasing our portfolio of product suites (“suites”),

• failure to maintain our revenue growth and profitability,

• the financial and business condition of our reseller and distribution channels,

• weak or negative growth in the industries we serve, including architecture, engineering and construction, manufacturing and digital media and entertainment markets,

• failure to accurately predict the impact of acquired businesses or to identify and realize the anticipated benefits of acquisitions, and successfully integrate such acquired businesses and technologies,

• perceived or actual technical or other problems with a product or combination of products,

• unexpected or negative outcomes of matters and expenses relating to litigation or regulatory inquiries,

• failure to achieve anticipated levels of customer acceptance of key new applications,

• restructuring or other accounting charges and unexpected costs or other operating expenses,

• pricing pressure or changes in product pricing or product mix,

• platform changes,

• timing of product releases and retirements,

• failure to continue momentum of frequent release cycles or to move a significant number of customers from prior product versions in connection with our programs to retire major products,

• failure to achieve and maintain planned cost reductions and productivity increases,

• changes in tax laws or regulations, tax arrangements with foreign governments or accounting rules, such as increased use of fair value measures and the potential requirement that U.S. registrants prepare financial statements in accordance with International Financial Reporting Standards (“IFRS”),

• changes in sales compensation practices,

• dependence on and the timing of large transactions,

• failure to effectively implement our copyright legalization programs, especially in developing countries,

• our inability to rapidly adapt to technological and customer preference changes, including those related to cloud computing, mobile devices, and new computing platforms,

• failure to achieve sufficient sell-through in our channels for new or existing products,

• renegotiation or termination of royalty or intellectual property arrangements,

• interruptions or terminations in the business of our consultants or third party developers,

• the timing and degree of expected investments in growth and efficiency opportunities,

• failure to achieve continued success in technology advancements, and

• natural disasters such as the earthquakes and tsunami in Japan in March 2011.

We have also experienced fluctuations in financial results in interim periods in certain geographic regions due to seasonality or regional economic conditions. In particular, our financial results in Europe during our third quarter are usually

14

affected by a slower summer period, and our Asia Pacific operations typically experience seasonal slowing in our third and fourth quarters.

Our operating expenses are based in part on our expectations for future revenue and are relatively fixed in the short term. Accordingly, any revenue shortfall below expectations could have an immediate and significant adverse effect on our profitability. Greater than anticipated expenses or a failure to maintain rigorous cost controls would also negatively affect profitability. Further, gross margins may be adversely affected if our sales of Creative Finishing products and consulting services, which historically have had lower margins, grow at a faster rate than sales of our higher-margin products and services.

If we do not maintain good relationships with the members of our distribution channel, or achieve anticipated levels of sell-through, our ability to generate revenue will be adversely affected. If our distribution channel suffers financial losses, becomes financially unstable or insolvent, is negatively impacted by the recent consolidation between two important distributors, or is not provided the right mix of incentives to sell our products, our ability to generate revenue will be adversely affected.

We sell our software products both directly to end-users and through a network of distributors and resellers. For the fiscal year ended January 31, 2012, approximately 84%, of our revenue was derived from indirect channel sales through distributors and resellers, and we expect that the majority of our revenue will continue to be derived from indirect channel sales in the future. Our ability to effectively distribute our products depends in part upon the financial and business condition of our distributor and reseller network. Computer software distributors and resellers typically are not highly capitalized, have previously experienced difficulties during times of economic contraction and experienced difficulties during the past several years. We have processes to ensure that we assess the creditworthiness of distributors and resellers prior to our sales to them. In the past we have taken steps to support them, and may take additional steps in the future, such as extending credit terms and providing temporary discounts. These steps, if taken, could harm our financial results. If our distributors and resellers were to become insolvent, they would not be able to maintain their business and sales, or provide customer support services, which would negatively impact our business and revenue.

We rely significantly upon major distributors and resellers in both the U.S. and international regions, including the distributor Tech Data Corporation and its global affiliates (“Tech Data”). Tech Data accounted for 17%, 16% and 14% of our total net revenue for the fiscal years ended January 31, 2012, 2011 and 2010, respectively.

On October 27, 2011, Tech Data purchased certain assets of Mensch und Maschine Software (“MuM”) in Europe. MuM has been a European distributor of our products in that region. The acquisition concentrates additional sales through Tech Data and on a consolidated basis would have accounted for 21% of our revenue for the fiscal year ended January 31, 2012, respectively if the acquisition had occurred on February 1, 2011. Although we believe that we are not substantially dependent on Tech Data, including following the acquisition of certain assets of MuM, if Tech Data were to experience a significant disruption with its business or if our relationship with Tech Data were to significantly deteriorate, it is possible that our ability to sell to end users would be, at least temporarily, negatively impacted. This could in turn negatively impact our financial results.

Over time, we have modified and will continue to modify aspects of our relationship with our distributors and resellers, such as their incentive programs, pricing to them and our distribution model to motivate and reward them for aligning their businesses with our strategy and business objectives. Changes in these relationships and underlying programs could negatively impact their business and harm our business. In addition, the loss of or a significant reduction in business with those distributors or resellers or the failure to achieve anticipated levels of sell-through with any one of our major international distributors or large resellers could harm our business. In particular, if one or more of such distributors or resellers were unable to meet their obligations with respect to accounts payable to us, we could be forced to write off such accounts and may be required to delay the recognition of revenue on future sales to these customers. These events could have a material adverse effect on our financial results.

A significant portion of our revenue is generated through maintenance revenue; decreases in maintenance attach or renewal rates or a decrease in the number of new licenses we sell negatively impacts our future revenue and financial results.

Our maintenance customers have no obligation to attach maintenance to their initial license or renew their maintenance contract after the expiration of their initial maintenance period, which is typically one year. Our customers' attach and renewal rates may decline or fluctuate as a result of a number of factors, including overall global economy, the health of their businesses, and the perceived value of the maintenance program. If our customers do not attach maintenance to their initial license or renew their maintenance contract for our products, our maintenance revenue will decline and our financial results will suffer.

In addition, a portion of the growth of our maintenance revenue has typically been associated with growth of the number

15

of licenses that we sell. Any reduction in the number of licenses that we sell, even if our customers' attach rates do not change, will have a negative impact on our future maintenance revenue. This in turn would impact our business and harm our financial results.

We recognize maintenance revenue ratably over the term of the maintenance contracts, which is predominantly one year, but may also range up to five years. Decreases in net maintenance billings will negatively impact future maintenance revenue, however future maintenance revenue will also be impacted by other factors such as the amount, timing and mix of contract terms of future billings.

We are dependent on international revenue and operations, exposing us to significant regulatory, global economic, intellectual property, collections, currency exchange rate, taxation, political instability and other risks, which could adversely impact our financial results.

We are dependent on our international operations for a significant portion of our revenue. Our international revenue, including that from emerging economies, is subject to general economic and political conditions in foreign markets, including conditions in foreign markets resulting from economic and political conditions in the U.S. Our revenue is also impacted by the relative geographical and country mix of our revenue over time. These factors have recently adversely impacted and may in the future adversely impact our international revenue, and consequently our business as a whole. Further, our dependency on international revenue makes us much more exposed to global economic and political trends, which can negatively impact our financial results, even if our results in the U.S. are strong for a particular period.

We anticipate that our international operations will continue to account for a significant portion of our net revenue, and, as we expand our international development, sales and marketing expertise, will provide significant support to our overall efforts in countries outside of the U.S. Risks inherent in our international operations include fluctuating currency exchange rates, including risks related to any hedging activities we undertake, unexpected changes in regulatory requirements and practices, delays resulting from difficulty in obtaining export licenses for certain technology, tariffs, quotas and other trade barriers and restrictions, transportation delays, operating in locations with a higher incidence of corruption and fraudulent business practices, particularly in emerging economies, increasing enforcement by the U.S. under the Foreign Corrupt Practices Act, adoption of stricter anti-corruption laws in certain countries, including the United Kingdom, difficulties in staffing and managing foreign sales and development operations, longer collection cycles for accounts receivable, potential changes in tax laws, including possible U.S. tax law changes that, if enacted, could significantly impact how U.S. multinational companies are taxed on foreign subsidiary earnings, tax arrangements with foreign governments, including our ability to meet and review the terms of those tax arrangements, and laws regarding the management of and access to data and public networks, possible future limitations upon foreign owned businesses, increased financial accounting and reporting burdens and complexities, inadequate local infrastructure, greater difficulty in protecting intellectual property, and other factors beyond our control, including popular uprisings, terrorism, war, natural disasters and diseases.

Some of our business partners also have international operations and are subject to the risks described above. Even if we are able to successfully manage the risks of international operations, our business may be adversely affected if our business partners are not able to successfully manage these risks.

Our business could suffer as a result of risks, costs and charges associated with strategic acquisitions and investments.

We regularly acquire or invest in businesses, software products and technologies that are complementary to our business through acquisitions, strategic alliances or equity or debt investments. The risks associated with such acquisitions include, among others, the difficulty of assimilating products, operations and personnel, inheriting liabilities such as intellectual property infringement claims, the failure to realize anticipated revenue and cost projections, the requirement to test and assimilate the internal control processes of the acquired business in accordance with the requirements of Section 404 of the Sarbanes-Oxley Act of 2002 and the diversion of management's time and attention. Our recent increase in the number of acquisitions further exacerbates these risks.

In addition, such acquisitions and investments involve other risks such as:

• the inability to retain customers, vendors, distributors, business partners, and other entities associated with the acquired business;

• the potential impact on relationships with existing customers, vendors, distributors as business partners as a result of acquiring another business;

• the potential that due diligence of the acquired business or product does not identify significant problems;

• the potential any one or multiple of the investments become impaired in a given reporting period;

• the potential for incompatible business cultures; and

16

• significant transaction or integration-related costs.

We may not be successful in overcoming such risks, and such acquisitions and investments may negatively impact our business. In addition, such acquisitions and investments have in the past and may in the future contribute to potential fluctuations in our quarterly financial results These fluctuations could arise from transaction-related costs and charges associated with eliminating redundant expenses or write-offs of impaired assets recorded in connection with acquisitions and investments. These costs or charges could negatively impact our financial results for a given period, cause quarter to quarter variability in our financial results or negatively impact our financial results for several future periods.

The current global economic uncertainty may impact our business forcing us to take actions that could be costly and may not be as effective as we anticipate, and may force us to take additional actions to reduce our expenses and stimulate demand for our products.

The current global economic uncertainty may lead to a reduction of our revenue levels and force us to take actions to reduce our cost structure to more closely align our costs with our reduced revenue levels. Over the past several years we have on several occasions taken such actions. In taking any future restructuring actions, we may incur, and over the past several years have incurred, additional costs that negatively impact our operating margins. If we do not achieve the proper balance of these cost reduction initiatives, we may eliminate critical elements of our operations, the loss of which could negatively impact our ability to benefit from eventual economic growth.

In addition, such global economic uncertainty and resulting impact on our business may cause us to take, and over the past several years we have taken, actions to stimulate demand for our products through a number of programs. Although we attempt to balance the cost of these programs against the longer term benefits, it is possible that we will make such investments without corresponding increases in demand for our products and our revenue. This would further reduce our operating margins and have a negative impact on our financial results.

Net revenue or earnings shortfalls or the volatility of the market generally may cause the market price of our stock to decline.

The market price for our common stock has experienced significant fluctuations and may continue to fluctuate significantly. The market price for our common stock may be affected by a number of factors, including the other factors described in this Part I, Item 1A and the following:

• changes in estimates of future results or recommendations by securities analysts;

• the announcement of new products or product enhancements by us or our competitors;

• shortfalls in our expected financial results, including net revenue, earnings or key performance metrics;

• quarterly variations in our or our competitors' results of operations;

• unusual events such as significant acquisitions, divestitures, regulatory actions and litigation;

• changes in laws, rules or regulations applicable to our business;

• general socio-economic, political or market conditions; and

• other factors, including factors unrelated to our operating performance, such as instability affecting the economy or the operating performance of our competitors.

Significant changes in the price of our common stock could expose us to additional costly and time-consuming litigation. Historically, after periods of volatility in the market price of a company's securities, a company becomes more susceptible to securities class action litigation. This type of litigation is often expensive and diverts management's attention and resources.

Our strategy to develop and introduce new product and service offerings, including new product features, exposes us to risks such as limited customer acceptance, costs related to product defects and large expenditures that may not result in additional net revenue.

Rapid technological changes, as well as changes in customer requirements and preferences, characterize the software industry. We devote significant resources to the development of new technologies, such as our design and entertainment products and our digital prototyping and collaboration products. In addition, we frequently introduce new business models or methods that require a considerable investment of technical and financial resources such as an increase in our portfolio of, and focus on, suites. We are making such investments through further development and enhancement of our existing products, as well as through acquisitions of new product lines. Such investments may not result in sufficient revenue generation to justify their costs, or competitors may introduce new products and services that achieve acceptance among our current customers, adversely affecting our competitive position.

17

In particular, a critical component of our growth strategy is to have customers of our AutoCAD and AutoCAD LT products expand their portfolios to include our suites. Over time, we aim to migrate customers using standalone Autodesk products to expand their portfolio with our suites offerings. Should sales of licenses of our AutoCAD and AutoCAD LT or standalone Autodesk flagship products decrease without a corresponding increase in suites product revenue or without purchases of customer seats to our suites, our results of operations will be adversely affected. Additionally, the software products we offer are complex, and despite extensive testing and quality control, may contain errors or defects. These errors or defects could result in the need for corrective releases to our software products, damage to our reputation, loss of revenue, an increase in product returns or lack of market acceptance of our products, any of which would likely harm our business.

Further, given the rapid speed of changing customer expectations and advancement of technology inherent in the software industry, the extensive and complex efforts required to create useful and widely accepted products and the rapid evolution of cloud computing, mobile devices, new computing platforms and other technologies, our executive management team must act quickly, continuously and with vision. Although we have articulated a strategy that we believe will fulfill these challenges, if we fail to execute properly on that strategy, adapt that strategy as market conditions evolve, fail to internalize and execute on that strategy, we may fail to meet our customers' expectations, fail to compete with our competitors' products and technology and lose the confidence of our channel partners and employees. This in turn could adversely affect our business and financial performance.

From time to time we realign or introduce new business and sales initiatives; if we fail to successfully execute and manage these initiatives, our results of operations could be negatively impacted.

As part of our effort to accommodate our customers' needs and demands and the rapid evolution of technology, we from time to time evolve our business and sales initiatives such as realigning our development and marketing organizations, and expanding our portfolio of suites and our offering of software as a service, and realign our internal resources in an effort to improve efficiency. We may take such actions without clear indications that they will prove successful. Market acceptance of any new business or sales initiative is dependent on our ability to match our customers' needs at the right time and price. Often we have limited prior experience and operating history in these new areas of emphasis. If any of our assumptions about expenses, revenue or revenue recognition principles from these initiatives proves incorrect, or our attempts to improve efficiency are not successful, our actual results may vary materially from those anticipated, and our financial results will be negatively impacted.

Because we derive a substantial portion of our net revenue from a small number of products, including our AutoCAD-based software products including suites, if these products are not successful, our net revenue will be adversely affected.

We derive a substantial portion of our net revenue from sales of licenses of a limited number of our products, including AutoCAD software, products based on AutoCAD, which includes our suites that serve specific markets, upgrades to those products and products that are interoperable with AutoCAD. Any factor adversely affecting sales of these products, including the product release cycle, market acceptance, product competition, performance and reliability, reputation, price competition, economic and market conditions and the availability of third-party applications, would likely harm our financial results. During the fiscal year ended January 31, 2012, combined revenue from our AutoCAD and AutoCAD LT products, not including Suites having AutoCAD or AutoCAD LT as a component, represented 33% of our total net revenue.

If we are not able to adequately protect our proprietary rights, our business could be harmed.

We rely on a combination of patent, copyright and trademark laws, trade secret protections, confidentiality procedures and contractual provisions to protect our proprietary rights. Despite such efforts to protect our proprietary rights, unauthorized parties from time to time have copied aspects of our software products or have obtained and used information that we regard as proprietary. Policing unauthorized use of our software products is time-consuming and costly. While we have recovered some revenue resulting from the unauthorized use of our software products, we are unable to measure the extent to which piracy of our software products exists and we expect that software piracy will remain a persistent problem. Furthermore, our means of protecting our proprietary rights may not be adequate.

Additionally, we actively protect the secrecy of our confidential information and trade secrets, including our source code. If unauthorized disclosure of our source code occurs, we could potentially lose future trade secret protection for that source code. The loss of future trade secret protection could make it easier for third-parties to compete with our products by copying functionality, which could adversely affect our financial performance and our reputation. We also seek to protect our confidential information and trade secrets through the use of non-disclosure agreements with our customers, contractors, vendors and partners. However, it is possible that our confidential information and trade secrets may be disclosed or published without our authorization. If this were to occur, it may be difficult and/or costly for us to enforce our rights, and our financial performance and reputation could be negatively impacted.

18

We are exposed to fluctuations in currency exchange rates that could negatively impact our financial results and cash flows.

Because we conduct a substantial portion of our business outside the U.S. and we make certain business and resource decisions based on assumptions about foreign currency, we face exposure to adverse movements in foreign currency exchange rates. These exposures may change over time as business practices evolve and economic conditions change, and they could have a material adverse impact on our financial results and cash flows.

We use derivative instruments to manage a portion of our earnings exposure and cash flow exposure to fluctuations in foreign currency exchange rates. As part of our risk management strategy, we use foreign currency contracts to manage a portion of our exposures of underlying assets, liabilities and other obligations, which exist as part of our ongoing business operations. These foreign currency instruments have maturities that extend for 1 to 12 months in the future, and provide us with some protection against currency exposures. However, our attempts to hedge against these risks may not be successful, resulting in an adverse impact on our financial results.

The fluctuations of currencies in which we conduct business can both increase and decrease our overall revenue and expenses for any given fiscal period. Although our foreign currency cash flow hedge program extends beyond the current quarter in order to reduce our exposure to foreign currency volatility, we do not attempt to completely mitigate this risk, and in any case, will incur transaction fees in adopting such hedging programs. Such volatility, even when it increases our revenues or decreases our expenses, impacts our ability to accurately predict our future results and earnings.

We may face intellectual property infringement claims that could be costly to defend and result in our loss of significant rights.

As more software patents are granted worldwide, the number of products and competitors in our industry segments grow and the functionality of products in different industry segments overlap, we expect that software product developers will be increasingly subject to infringement claims. Infringement or misappropriation claims have in the past been, and may in the future be, asserted against us, and any such assertions could harm our business. Additionally, certain patent holders without products have become more aggressive in threatening and pursuing litigation in attempts to obtain fees for licensing the right to use patents. Any such claims or threats, whether with or without merit, have been and could in the future be time-consuming to defend, result in costly litigation and diversion of resources, cause product shipment delays or require us to enter into royalty or licensing agreements. In addition, such royalty or license agreements, if required, may not be available on acceptable terms, if at all, which would likely harm our business.

Our investment portfolio is composed of a variety of investment vehicles in a number of countries that are subject to interest rate trends, market volatility and other economic factors. If general economic conditions further cause interest rates to decline, credit ratings of our investments to deteriorate, or illiquidity in the financial marketplace, we may continue to experience a decline in interest income, an inability to sell our investments, or impairment in the value of our investments.

It is our policy to invest our cash, cash equivalents and marketable securities in highly liquid instruments with, and in the custody of, financial institutions with high credit ratings and to limit the amounts invested with any one institution, type of security and issuer. However, we are subject to general economic conditions, interest rate trends and volatility in the financial marketplace that can affect the income that we receive from our investments, the net realizable value of our investments (including our cash, cash equivalents and marketable securities) and our ability to sell them. In the U.S., for example, the yields on our portfolio securities are very low due to general economic conditions. Any one of these factors could reduce our interest income, or result in material charges, which in turn could impact our overall net income and earnings per share.

If we were to experience a loss on any of our investments that loss may cause us to record an other-than-temporary impairment charge. The effect of this charge could impact our overall net income and earnings per share. In any of these scenarios, our liquidity may be negatively impacted, which in turn may prohibit us from making investments in our business, taking advantage of opportunities and potentially meeting our financial obligations as they come due.

We are subject to legal proceedings and regulatory inquiries, and we may be named in additional legal proceedings or become involved in regulatory inquiries in the future, all of which are costly, distracting to our core business and could result in an unfavorable outcome, or a material adverse effect on our business, financial condition, results of operations, cash flows or the trading price for our securities.

We are involved in legal proceedings and receive inquiries from regulatory agencies. As the global economy has changed and our business has evolved, we have seen an increase in litigation activity and regulatory inquiries. Like many other high technology companies, the number and frequency of inquiries from U.S. and foreign regulatory agencies we have received regarding our business and our business practices, and the business practices of others in our industry, have increased in recent years. In the event that we are involved in significant disputes or are the subject of a formal action by a regulatory agency, we could be exposed to costly and time consuming legal proceedings that could result in any number of outcomes. While outcomes of such actions vary, any claims or regulatory actions initiated by or against us, whether successful or not, could result in

19

expensive costs of defense, costly damage awards, injunctive relief, increased costs of business, fines or orders to change certain business practices, significant dedication of management time, diversion of significant operational resources, or otherwise harm our business. In any of these cases, our financial results could be negatively impacted.

A breach of security in our products or computer systems may compromise the integrity of our products, harm our reputation, create additional liability and adversely impact our financial results.

We make significant efforts to maintain the security and integrity of our product source code and computer systems. There appears to be an increasing number of computer “hackers” developing and deploying a variety of destructive software programs (such as viruses, worms, and the like) that could attack our products and computer systems. Despite significant efforts to create security barriers to such programs, it is virtually impossible for us to entirely mitigate this risk. Like all software products, our software is vulnerable to such attacks. The impact of such an attack could disrupt the proper functioning of our software products, cause errors in the output of our customers' work, allow unauthorized access to sensitive, proprietary or confidential information of ours or our customers and other destructive outcomes. If this were to occur, our reputation may suffer, customers may stop buying our products, we could face lawsuits and potential liability and our financial performance could be negatively impacted.

While we believe we currently have adequate internal control over financial reporting, we are required to evaluate our internal control over financial reporting under Section 404 of the Sarbanes-Oxley Act of 2002 and any adverse results from such evaluation could result in a loss of investor confidence in our financial reports and have an adverse effect on our stock price.

Pursuant to Section 404, we are required to furnish a report by our management on our internal control over financial reporting. The report contains, among other matters, an assessment of the effectiveness of our internal control over financial reporting as of the end of our fiscal year, including a statement as to whether or not our internal control over financial reporting is effective. This assessment must include disclosure of any material weaknesses in our internal control over financial reporting identified by management.

While we have determined that our internal control over financial reporting was effective as of January 31, 2012, as indicated in our Management Report on Internal Control over Financial Reporting, included in this Annual Report on Form 10‑K, we must continue to monitor and assess our internal control over financial reporting. If our management identifies one or more material weaknesses in our internal control over financial reporting and such weakness remains uncorrected at fiscal year-end, we will be unable to assert such internal control is effective at fiscal year-end. If we are unable to assert that our internal control over financial reporting is effective at fiscal year-end (or if our independent registered public accounting firm is unable to express an opinion on the effectiveness of our internal controls or concludes that we have a material weakness in our internal controls), we could lose investor confidence in the accuracy and completeness of our financial reports, which would likely have an adverse effect on our business and stock price.

In preparing our financial statements we make certain assumptions, judgments and estimates that affect amounts reported in our consolidated financial statements, which, if not accurate, may significantly impact our financial results.

We make assumptions, judgments and estimates for a number of items, including the fair value of financial instruments, goodwill, long-lived assets and other intangible assets, the realizability of deferred tax assets and the fair value of stock awards. We also make assumptions, judgments and estimates in determining the accruals for employee related liabilities including commissions, bonuses, and sabbaticals; and in determining the accruals for uncertain tax positions, partner incentive programs, product returns reserves, allowances for doubtful accounts, asset retirement obligations and legal contingencies. These assumptions, judgments and estimates are drawn from historical experience and various other factors that we believe are reasonable under the circumstances as of the date of the consolidated financial statements. Actual results could differ materially from our estimates, and such differences could significantly impact our financial results.

Changes in existing financial accounting standards or practices, or taxation rules or practices may adversely affect our results of operations.

Changes in existing accounting or taxation rules or practices, new accounting pronouncements or taxation rules, or varying interpretations of current accounting pronouncements or taxation practice could have a significant adverse effect on our results of operations or the manner in which we conduct our business. Further, such changes could potentially affect our reporting of transactions completed before such changes are effective.

For example, the U.S.-based Financial Accounting Standards Board (“FASB”) is currently working together with the International Accounting Standards Board (“IASB”) on several projects to further align accounting principles and facilitate more comparable financial reporting between companies who are required to follow U.S. Generally Accepted Accounting Principles (“GAAP”) under SEC regulations and those who are required to follow IFRS outside of the U.S. These efforts by the

20

FASB and IASB may result in different accounting principles under GAAP that may result in materially different financial results for us in areas including, but not limited to principles for recognizing revenue and lease accounting.

In addition, the SEC has not yet made a determination regarding how or if IFRS will be incorporated into the financial reporting system for U.S. companies. A change in accounting principles from GAAP to IFRS may have a material impact on the way in which we report financial results.

It is not clear if or when these potential changes in accounting principles may become effective, whether we have the proper systems and controls in place to accommodate such changes and the impact that any such changes may have on our consolidated financial position, results of operations and cash flows. In addition, as we evolve and change our business and sales models, we are currently unable to determine how these potential changes may impact our new models, particularly in the area of revenue recognition.

Our financial results could be negatively impacted if our tax positions are successfully challenged by tax authorities.

We are a U.S.-based multinational company subject to tax in multiple U.S. and foreign tax jurisdictions. Our effective tax rate is based on our expected geographic mix of earnings, statutory rates, intercompany transfer pricing, and enacted tax rules. Significant judgment is required in determining our effective tax rate and in evaluating our tax positions on a worldwide basis. We believe our tax positions, including intercompany transfer pricing policies, are consistent with the tax laws in the jurisdictions in which we conduct our business. It is possible that these positions may be challenged by jurisdictional tax authorities and may have a significant impact on our effective tax rate.

Our business could be adversely affected if we are unable to attract and retain key personnel.

Our success and ability to invest and grow depend largely on our ability to attract and retain highly skilled technical, professional, managerial, sales and marketing personnel. Historically, competition for these key personnel has been intense. The loss of services of any of our key personnel (including key personnel joining our company through acquisitions), the inability to retain and attract qualified personnel in the future, or delays in hiring required personnel, particularly engineering and sales personnel, could make it difficult to meet key objectives, such as timely and effective product introductions and financial goals.

We rely on third party technologies and if we are unable to use or integrate these technologies, our product and service development may be delayed and our financial results negatively impacted.

We rely on certain software that we license from third parties, including software that is integrated with internally developed software and used in our products to perform key functions. These third-party software licenses may not continue to be available on commercially reasonable terms, and the software may not be appropriately supported, maintained or enhanced by the licensors. The loss of licenses to, or inability to support, maintain and enhance any such software could result in increased costs, or in delays or reductions in product shipments until equivalent software can be developed, identified, licensed and integrated, which would likely harm our business.

Disruptions with licensing relationships and third party developers could adversely impact our business.

We license certain key technologies from third parties. Licenses may be restricted in the term or the use of such technology in ways that negatively affect our business. Similarly, we may not be able to obtain or renew license agreements for key technology on favorable terms, if at all, and any failure to do so could harm our business.

Our business strategy has historically depended in part on our relationships with third-party developers who provide products that expand the functionality of our design software. Some developers may elect to support other products or may experience disruption in product development and delivery cycles or financial pressure during periods of economic downturn. In particular markets, such disruptions have in the past, and would likely in the future, negatively impact these third-party developers and end users, which could harm our business.

Additionally, technology created by outsourced product development, whether outsourced to third parties or developed externally and transferred to us through business or technology acquisitions, have certain additional risks such as effective integration into existing products, adequate transfer of technology know-how and ownership and protection of transferred intellectual property.

As a result of our strategy of partnering with other companies for product development, our product delivery schedules could be adversely affected if we experience difficulties with our product development partners.

We partner with certain independent firms and contractors to perform some of our product development activities. We

21

believe our partnering strategy allows us to, among other things, achieve efficiencies in developing new products and maintaining and enhancing existing product offerings. Our partnering strategy creates a dependency on such independent developers. Independent developers, including those who currently develop products for us in the U.S. and throughout the world, may not be able or willing to provide development support to us in the future. In addition, use of development resources through consulting relationships, particularly in non-U.S. jurisdictions with developing legal systems, may be adversely impacted by, and expose us to risks relating to, evolving employment, export and intellectual property laws. These risks could, among other things, expose our intellectual property to misappropriation and result in disruptions to product delivery schedules.

We rely on third-parties to provide us with a number of operational services, including hosting and delivery, certain of our customer services operations as well as some of our operations; any interruption or delay in service from these third parties, breaches of security or privacy, or failures in data collection could expose us to liability, harm our reputation and adversely impact our financial performance.

We rely on hosted computer services from third parties for services that we provide our customers and computer operations for our internal use. As we gather customer data and host certain customer data in third-party facilities, a security breach could compromise the integrity or availability of customer data. In addition, our operations could be negatively affected in the event of a security breach, and we could be subject to the loss or theft of confidential or proprietary information, including source code.

Unauthorized access to this data may be obtained through break-ins, breach of our secure network by an unauthorized party, employee theft or misuse, or other misconduct. We rely on a number of third party suppliers in the operation of our business for the provision of various services and materials that we use in the operation of our business and production of our products. Although we seek to diversify our third party suppliers, we may from time to time rely on a single or limited number of suppliers, or upon suppliers in a single country, for these services or materials. The inability of such third parties to satisfy our requirements could disrupt our business operations or make it more difficult for us to implement our business strategy. If any of these situations were to occur, our reputation could be harmed, we could be subject to third party liability, including under data protection and privacy laws in certain jurisdictions and our financial performance could be negatively impacted.

We regularly invest resources to update and improve our internal information technology systems. Should our investments not succeed, or if delays or other issues with new or existing internal technology systems disrupt our operations, our business could be harmed.

We rely on our network and data center infrastructure, internal technology systems and our websites for our development, marketing, operational, support, sales, accounting and financial reporting activities. We are continually investing resources to update and improve these systems and environments in order to meet the growing requirements of our business and customers. Such improvements are often complex, costly and time consuming. In addition, such improvements can be challenging to integrate with our existing technology systems, or uncover problems with our existing technology systems. Unsuccessful implementation of hardware or software updates and improvements could result in disruption in our business operations, loss of revenue, errors in our accounting and financial reporting or damage to our reputation.

Our business may be significantly disrupted upon the occurrence of a catastrophic event.

Our business is highly automated and relies extensively on the availability of our network and data center infrastructure, our internal technology systems and our websites. We also rely on hosted computer services from third parties for services that we provide to our customers and computer operations for our internal use. The failure of our systems or hosted computer services due to a catastrophic event, such as an earthquake, fire, flood, tsunami, weather event, telecommunications failure, power failure, cyber attack or war, could adversely impact our business, financial results and financial condition. We have developed disaster recovery plans and maintain backup systems in order to reduce the potential impact of a catastrophic event, however there can be no assurance that these plans and systems would enable us to return to normal business operations. In addition, any such event could negatively impact a country or region in which we sell our products. This could in turn decrease that country's or region's demand for our products, thereby negatively impacting our financial results.

ITEM 1B. UNRESOLVED STAFF COMMENTS

We have received no written comments regarding our periodic or current reports from the staff of the SEC that were issued 180 days or more preceding the end of our 2012 fiscal year that remain unresolved.

22

ITEM 2. PROPERTIES

We lease 1,935,000 square feet of office space in 109 locations in the United States and internationally through our foreign subsidiaries. In addition, we own 25,000 square feet of office space in two locations internationally through our foreign subsidiaries. Our executive offices and corporate headquarters are located in leased office space in San Rafael, California. Our San Rafael facilities consist of 284,000 square feet under leases that have expiration dates ranging from February 2012 to December 2019. We and our foreign subsidiaries lease additional space in various locations throughout the world for local sales, product development and technical support personnel.

All facilities are in good condition. Our facilities, excluding those in restructuring, are operating at capacities averaging 82% occupancy worldwide as of January 31, 2012. We believe that our existing facilities and offices are adequate to meet our requirements for the foreseeable future. See Note 8, “Commitments and Contingencies,” in the Notes to Consolidated Financial Statements for more information about our lease commitments.

ITEM 3. LEGAL PROCEEDINGS

We are involved in a variety of claims, suits, investigations and proceedings in the normal course of business activities including claims of alleged infringement of intellectual property rights, commercial, employment, piracy prosecution, business practices and other matters. In our opinion, resolution of pending matters is not expected to have a material adverse impact on our consolidated results of operations, cash flows or financial position. Given the unpredictable nature of legal proceedings, there is a reasonable possibility that an unfavorable resolution of one or more such proceedings could in the future materially affect our results of operations, cash flows or financial position in a particular period, however, based on the information known by us as of the date of this filing and the rules and regulations applicable to the preparation of the Company's financial statements, any such amount is either immaterial or it is not possible to provide an estimated amount of any such potential loss.

ITEM 4. MINE SAFETY DISCLOSURES

Not applicable.

23

PART II

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Our common stock is traded on the NASDAQ Global Select Market under the symbol ADSK. The following table lists the high and low sales prices for each quarter in the last two fiscal years.

	High		Low
Fiscal 2012
First Quarter	$	45.55	$	38.47
Second Quarter	45.99		34.34
Third Quarter	35.83		23.41
Fourth Quarter	36.60		29.80
Fiscal 2011
First Quarter	$	34.72	$	22.95
Second Quarter	34.89		24.05
Third Quarter	36.20		27.36
Fourth Quarter	42.03		33.77

Dividends

We did not declare any cash or stock dividends in either fiscal 2012 or fiscal 2011. We anticipate that, for the foreseeable future, we will not pay any cash or stock dividends.

Stockholders

As of January 31, 2012, the number of common stockholders of record was 579. Because many of our shares of common stock are held by brokers or other institutions on behalf of stockholders, we are unable to estimate the total number of stockholders represented by the record holders.

Issuer Purchases of Equity Securities

The purpose of Autodesk’s stock repurchase program is largely to help offset the dilution from the issuance of stock under our employee stock plans and for such other purposes as may be in the interests of Autodesk and its stockholders, and has the effect of returning excess cash generated from our business to stockholders. The number of shares acquired and the timing of the purchases are based on several factors, including general market conditions, the volume of employee stock option exercises, stock issuances, the trading price of our common stock, cash on hand and available in the U.S., and company defined trading windows. In December 2007, the Board of Directors approved a plan which authorized the repurchase of 20.0 million shares; during fiscal 2012 all shares have been repurchased under this plan. In December 2010, the Board of Directors approved an additional plan which authorized the repurchase of 20.0 million shares. These plans do not have a fixed expiration date. During the three and twelve months ended January 31, 2012, we repurchased 2.0 million and 9.7 million shares of our common stock, respectively. At January 31, 2012, 14.7 million shares remained available for repurchase under the existing repurchase authorizations. See Note 9, “Stockholders' Equity,” in the Notes to Consolidated Financial Statements for further discussion.

24

The following table provides information about the repurchase of our common stock under the stock repurchase programs in open-market transactions during the quarter ended January 31, 2012:

(Shares in thousands)	Total Number of Shares Purchased	Average Price Paid per Share		Total Number of Shares Purchased as Part of Publicly Announced Plans or Programs(1)	Maximum Number of Shares that May Yet Be Purchased Under the Plans or Programs(2)
November 1- November 30	503.3	$	31.18	503.3	16,236.7
December 1 - December 31	1,496.7	31.99		1,496.7	14,740.0
January 1 - January 31	—	—		—	14,740.0
Total	2,000.0	$	31.79	2,000.0

____________________ 

(1) Represents shares purchased in open-market transactions under the stock repurchase programs approved by the Board of Directors.

(2) These amounts correspond to the plan approved by the Board of Directors in December 2010 that authorizes the repurchase of 20.0 million shares. This plan does not have a fixed expiration date.

There were no sales of unregistered securities during the three months ended January 31, 2012.

Company Stock Performance

The following graph shows a five-year comparison of cumulative total return (equal to dividends plus stock appreciation) for our Common Stock, the Standard & Poor’s 500 Stock Index and the Dow Jones U.S. Software Index.

Comparison of Five Year Cumulative Total Stockholder Return(1)

 ____________________ 

(1) Assumes $100 invested on January 31, 2007, in Autodesk’s stock, the Standard & Poor’s 500 Stock Index, and the Dow Jones U.S. Software Index, with reinvestment of all dividends. Total stockholder returns for prior periods are not an indication of future investment returns.

25

ITEM 6. SELECTED FINANCIAL DATA

The following selected consolidated financial data is not necessarily indicative of results of future operations, and should be read in conjunction with Item 7, “Management's Discussion and Analysis of Financial Condition and Results of Operations,” and the consolidated financial statements and related notes thereto included in Item 8 of this Form 10-K to fully understand factors that may affect the comparability of the information presented below. The financial data for the years ended January 31, 2012, 2011 and 2010 are derived from, and are qualified by reference to, the audited consolidated financial statements that are included in this Form 10-K. The financial data for the years ended January 31, 2009 and 2008 are derived from audited, consolidated financial statements which are not included in this Form 10-K.

	Fiscal year ended January 31,
	2012			2011			2010			2009			2008
	(In millions, except per share data)
For the Fiscal Year:
Net revenue	$	2,215.6		$	1,951.8		$	1,713.7		$	2,315.2		$	2,171.9
Income from operations	355.6			271.4			65.6			244.5			445.6
Provision for income taxes	(77.6		)	(60.0		)	(26.7		)	(68.9		)	(113.8		)
Net income(1)	285.3			212.0			58.0			183.6			356.2
Cash flow from operations	573.5			540.8			246.8			593.9			708.5
Common Stock Data:
Basic net income per share	$	1.25		$	0.93		$	0.25		$	0.81		$	1.55
Diluted net income per share	1.22			0.90			0.25			0.80			1.47
Dividends paid per share	—			—			—			—			—
Income from operations includes the following items(2):
Stock-based compensation expense	$	108.8		$	80.7		$	93.6		$	89.5		$	99.3
Amortization of acquisition related intangibles	70.3			55.9			58.4			46.6			20.2
Restructuring charges	(1.3		)	10.8			48.2			40.2			—
Impairment	—			—			21.0			128.9			—
In-process research and development	—			—			—			26.9			5.5
Employee tax reimbursement related to voluntary stock option review	—			—			—			—			13.7
Provision for income taxes includes the following item:
Establishment of valuation allowance on deferred tax assets	$	—		$	—		$	21.0		$	—		$	—
At Year End
Total assets	$	3,227.8		$	2,787.6		$	2,447.2		$	2,420.7		$	2,212.2
Long-term liabilities	390.8			308.5			269.7			309.9			251.4
Stockholders’ equity	1,882.9			1,609.3			1,473.5			1,310.7			1,230.5

 ____________________ 

(1) Net income includes the items identified below in “Income from operations” net of tax.

(2) These items are recorded on a pre-tax basis.

26

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

The discussion in our MD&A contains trend analyses and other forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934. Forward-looking statements are any statements that look to future events and consist of, among other things, our business strategies, including those discussed below in “Strategy” below, anticipated future net revenue, future operating margin and other future financial results (by product type and geography) and operating expenses, the effect of unemployment and availability of credit, the effects of the U.S. credit downgrade and weak global economic conditions, our backlog, expected trends in certain financial metrics, expected market trends, including the growth of cloud, mobile and social computing, the impact of acquisitions and investment activities, the effect of fluctuations in exchange rates and our hedging activities on our financial results, the impact of natural disaster on our operations and financial results, our abilities to successfully expand adoption of our products, our ability to gain market acceptance of new businesses and sales initiatives, and our ability to successfully increase sales of product suites as part of our overall sales strategy, our belief that the strength of our channel network, technological leadership, brand recognition, breadth of product line, and large installed base are benefiting us as global economies recover, the impact of economic volatility and geopolitical activities in certain countries, particularly emerging economy countries, and the resulting effect on our financial results, and the impact of our restructuring activities. In addition, forward-looking statements also consist of statements involving expectations regarding product acceptance, continuation of our stock repurchase program, statements regarding our liquidity and short-term and long-term cash requirements, as well as, statements involving trend analyses and statements including such words as “may,” “believe,” “could,” “anticipate,” “would,” “might,” “plan,” “expect,” and similar expressions or the negative of these terms or other comparable terminology. These forward-looking statements speak only as of the date of this Annual Report on Form 10-K and are subject to business and economic risks. As such, our actual results could differ materially from those set forth in the forward-looking statements as a result of the factors set forth above in Item 1A, “Risk Factors,” and in our other reports filed with the U.S. Securities and Exchange Commission. We assume no obligation to update the forward-looking statements to reflect events that occur or circumstances that exist after the date on which they were made.

Strategy

Autodesk’s vision is to help people imagine, design and create a better world. We do this by developing software for the world’s designers, architects, engineers, and digital artists—the people who create the world's products, buildings, infrastructure, films, and games. Autodesk serves customers in three primary markets: architecture, engineering and construction; manufacturing; and digital media and entertainment.

Our goal is to provide our customers with the world’s most valuable, innovative, and engaging software and services. Our product and services portfolio allow our customers to digitally visualize, simulate, and analyze their projects, helping them to better understand the consequences of their design decisions; save time, money, and resources; and become more innovative.

Today, complex challenges such as globalization, urbanization, and sustainable design are driving our customers to new levels of performance and competitiveness, and we are committed to helping them address those challenges and take advantage of new opportunities. To achieve these goals, we are capitalizing on two of our strongest competitive advantages: our ability to bring advanced technology to mainstream markets, and the breadth and depth of our product portfolio.

By innovating in existing technology categories, we bring powerful new design capabilities to volume markets. Our products are designed to be easy-to-learn and use, and to provide customers with a low cost of deployment, a low total cost of ownership, and a rapid return on investment. In addition, our software architecture allows for extensibility and integration with other products. The breadth of our technology and product line gives us a unique competitive advantage, because it allows our customers to address a wide variety of problems in ways that transcend industry and disciplinary boundaries. This is particularly important in helping our customers address the complex challenges mentioned above. We also believe that our technological leadership and global brand recognition have positioned us well for long-term growth and industry leadership.

In addition to the competitive advantages afforded by our technology, our large global network of distributors, resellers, third-party developers, customers, educational institutions, faculty and students is a key competitive advantage. This network of relationships provides us with a broad and deep reach into volume markets around the world. Our distributor and reseller network is extensive and provides our customers with the resources to purchase, deploy, learn, and support our products quickly and easily. We have a significant number of registered third-party developers who create products that work well with Autodesk products and extend them for a variety of specialized applications. Users with expertise in our products are broadly and globally available from educational institutions and in the existing workforce. We offer extensive educational programs, including student versions of software, curricula, and faculty development. We have an extensive global community of students who are experienced with our software and poised to become the next generation of professional users – thus reducing the cost

27

of training and providing fresh talent for our customers. Our global network of distributors, resellers, third party developers, customers, educational institutions and students has been developed over our twenty-nine year history. We believe it is an enduring competitive advantage that is difficult for others to replicate.

We continually strive to increase the business value of our design tools to our customers in a number of ways. First, we seek to address an increasing portion of our customers' workflow with products that extend the value of our customers' digital design information into visualization, analysis and simulation. Second, we seek to improve our product interoperability and usability, thus improving our customers' productivity and effectiveness. Third, we continue to develop new ways to deliver capability and value to our customers, such as product suites, cloud-based services, and delivery of our solutions on mobile devices and new hardware platforms. Fourth, we extend our customers' workflow with products for adjacent users and for the “customers of our customers,” thus increasing the value of the design information our customers produce. Finally, we continue to develop new lines of consumer products and services that are delivered and experienced through the Web, tablets, and mobile devices providing our advanced visualization technologies to consumers—a whole new category of Autodesk customer.

Autodesk was founded during the platform transition from mainframes and engineering workstations to personal computers. We developed and sustained a compelling value proposition based upon desktop software for the personal computer. Just as the transition from mainframes to personal computers transformed the industry thirty years ago, we believe our industry is undergoing a similar transition from the personal computer to cloud, mobile and social computing. Our growth strategy is predicated upon leading the transition in the industries we serve into the cloud in three ways:

• Grow. We believe sufficient opportunity remains in our PC-based software business and intend to continue to grow this business. In particular we are offering product suites with improved interoperability and usability to enhance our customers' productivity. We are continuing to drive maintenance and new licensing models to better match the business needs of our customers. We will continue emphasis on developing direct relationships with large, global customers and growing in emerging economies.

• Transform. At the same time we grow our desktop software business, we are migrating many of our products to the cloud. This entails development of new cloud computing infrastructure and restructuring our applications to leverage the cloud. We are also developing new capabilities that are enabled by the cloud such as collaborative PLM and on line simulation. Our goal is to lead our industry in transitioning to the cloud.

• Expand. We believe that the combination of cloud, mobile, and social computing affords us the opportunity to expand our business into new markets. Our consumer business is an example of this where we have added new customers. We intend to continue to develop businesses such as this to both add new customers and find new capabilities to incorporate in our core business.

We believe that expanding our customers' portfolios to include our suites presents a meaningful growth opportunity and is an important part of our overall strategy. As our customers in all industries adopt our design suites, we believe they will experience an increase in their productivity and the value of their design data. For fiscal 2012, revenue from Suites increased31%, as compared to the prior fiscal year. As a percentage of revenue, suites increased to 27% in fiscal 2012 as compared to 23% in fiscal 2011.

Expanding our geographic coverage is another key element of our growth strategy. While emerging economies are important for all global businesses, we believe they hold special opportunity for Autodesk. Much of the growth in the world’s construction and manufacturing is happening in emerging economies. Further, emerging economies face many of the challenges that our design technology can help address, for example infrastructure build-out. We believe that emerging economies continue to present long-term growth opportunities for us and revenue from emerging countries increased16% during fiscal 2012 as compared to fiscal 2011. Revenue from emerging countries represented 16% and 15% of fiscal 2012 and fiscal 2011 net revenue, respectively. While we believe there are long-term growth opportunities in emerging economies, conducting business in these countries presents significant challenges, including economic volatility, geopolitical risk, local competition, intellectual property protection, poorly developed business infrastructure, scarcity of talent and software piracy.

Our strategy includes improving our product functionality and expanding our product offerings through internal development as well as through the acquisition of products, technology and businesses. Acquisitions often increase the speed at which we can deliver product functionality to our customers; however, they entail cost and integration challenges and may, in certain instances, negatively impact our operating margins. We continually review these trade-offs in making decisions regarding acquisitions. We currently anticipate that we will acquire products, technology and businesses as compelling opportunities become available. In fiscal 2012, we increased the number, pace and dollars spent on acquisitions in comparison to fiscal 2011, but our decision to acquire businesses or technology is dependent on our business needs, the availability of suitable sellers and technology, and our own financial condition.

28

Our strategy depends upon a number of assumptions, including that we will be able to continue making our technology available to mainstream markets; leverage our large global network of distributors, resellers, third-party developers, customers, educational institutions, and students; improve the performance and functionality of our products; and adequately protect our intellectual property. If the outcome of any of these assumptions differs from our expectations, we may not be able to implement our strategy, which could potentially adversely affect our business. For further discussion regarding these and related risks see Part I, Item 1A, “Risk Factors.”

Critical Accounting Policies and Estimates

Our Consolidated Financial Statements are prepared in conformity with U.S. generally accepted accounting principles. In preparing our Consolidated Financial Statements, we make assumptions, judgments and estimates that can have a significant impact on amounts reported in our Consolidated Financial Statements. We base our assumptions, judgments and estimates on historical experience and various other factors that we believe to be reasonable under the circumstances. Actual results could differ materially from these estimates under different assumptions or conditions. We regularly reevaluate our assumptions, judgments and estimates. Our significant accounting policies are described in Note 1, “Business and Summary of Significant Accounting Policies,” in the Notes to Consolidated Financial Statements. We believe that of all our significant accounting policies, the following policies involve a higher degree of judgment and complexity. Accordingly, these are the policies we believe are the most critical to aid in fully understanding and evaluating our financial condition and results of operations.

Revenue Recognition.    We recognize revenue when persuasive evidence of an arrangement exists, delivery has occurred or services have been rendered, the price is fixed or determinable and collection is probable. However, determining whether and when some of these criteria have been satisfied often involves assumptions and judgments that can have a significant impact on the timing and amount of revenue we report.

For multiple element arrangements, we allocate the sales price among each of the deliverables using the residual method, under which revenue is allocated to undelivered elements based on their vendor-specific objective evidence (“VSOE”) of fair value. VSOE is the price charged when an element is sold separately or a price set by management with the relevant authority. If we do not have VSOE of an undelivered software license, we defer revenue recognition on the entire sales arrangement until all elements for which we do not have VSOE are delivered. If we do not have VSOE for undelivered maintenance or services, the revenue for the arrangement is recognized over the longest contractual service period in the arrangement. We are required to exercise judgment in determining whether VSOE exists for each undelivered element based on whether our pricing for these elements is sufficiently consistent.

Our assessment of likelihood of collection is also a critical factor in determining the timing of revenue recognition. If we do not believe that collection is probable, the revenue will be deferred until the earlier of when collection is deemed probable or payment is received.

Our indirect channel model includes both a two-tiered distribution structure, where distributors sell to resellers, and a one-tiered structure where Autodesk sells directly to resellers. Our product license revenue from distributors and resellers are generally recognized at the time title to our product passes to the distributor, in a two-tiered structure, or reseller, in a one-tiered structure, provided all other criteria for revenue recognition are met. This policy is predicated on our ability to estimate sales returns, among other criteria. We are also required to evaluate whether our distributors and resellers have the ability to honor their commitment to make fixed or determinable payments, regardless of whether they collect payment from their customers. Our policy also presumes that we have no significant performance obligations in connection with the sale of our product licenses by our distributors and resellers to their customers. If we were to change any of these assumptions or judgments, it could cause a material increase or decrease in the amount of revenue that we report in a particular period.

Marketable Securities.    At January 31, 2012 we had $447.2 million of short and long-term marketable securities. Marketable securities are stated at fair value. As described in Note 2, “Financial Instruments,” in the Notes to the Consolidated Financial Statements, we estimate the fair value of our marketable securities each quarter. Fair value is defined as an exit price, representing the amount that would be received from the sale of an asset or paid to transfer a liability in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants at the measurement date. When identical or similar assets are traded in active markets, the level of judgment required to estimate their fair value is relatively low. This is generally true for our cash and cash equivalents and the majority of our marketable securities, which we consider to be Level 1 assets and Level 2 assets. However, determining the fair value of marketable securities when observable inputs are not available (Level 3) requires significant judgment. For example we use a discounted cash flow model to estimate the fair value of our convertible debt securities because an active market does not exist for these securities which have been issued by private corporations. These assumptions are inherently subjective and involve significant management judgment. Whenever possible, we use observable market data and rely on unobservable inputs only when observable market data is not available, when determining fair value.

29

Business Combinations.    We allocate the purchase price of acquired companies to assets and liabilities, as well as to in-process research and development based upon their estimated fair values at the acquisition date. The purchase price allocation process requires us to make significant estimates and assumptions, especially at the acquisition date with respect to intangible assets and deferred revenue obligations.

Although we believe the assumptions and estimates we have made are reasonable, they are based in part on historical experience and information obtained from the management of the acquired companies and are inherently uncertain. Examples of critical estimates used in valuing certain of the intangible assets we have acquired or may acquire in the future include but are not limited to: future expected cash flows from sales, maintenance agreements and acquired developed technologies; the acquired company’s trade name and customer relationships as well as assumptions about the period of time the acquired trade name and customer relationships will continue to be used in the combined company’s product portfolio; expected costs to develop the in-process research and development into commercially viable products and estimated cash flows from the projects when completed; and discount rates.

Goodwill.    We test goodwill for impairment annually in our fourth fiscal quarter or sooner should events or changes in circumstances indicate potential impairment. When assessing goodwill for impairment, we use discounted cash flow models which include assumptions regarding projected cash flows. Variances in these assumptions could have a significant impact on our conclusion as to whether goodwill is impaired, or the amount of any impairment charge. Impairment charges, if any, result from instances where the fair values of net assets associated with goodwill are less than their carrying values. As changes in business conditions and our assumptions occur, we may be required to record impairment charges.

As of January 31, 2012, a hypothetical 10% decrease in the fair value of our reporting units would not have an impact on the carrying value of goodwill, nor result in impairment of goodwill. For further discussion see Note 1, “Business and Summary of Significant Accounting Policies,” in the Notes to the Consolidated Financial Statements.

Realizability of Long-Lived Assets.    We assess the realizability of our long-lived assets and related intangible assets, other than goodwill, annually during the fourth fiscal quarter, or sooner should events or changes in circumstances indicate the carrying values of such assets may not be recoverable. We consider the following factors important in determining when to perform an impairment review: significant under-performance of a business or product line relative to budget; shifts in business strategies which affect the continued uses of the assets; significant negative industry or economic trends; and the results of past impairment reviews.

We assessrecoverability of these assets by comparing the carrying amounts to the future undiscounted cash flows the assets are expected to generate. If impairment indicators were present based on our undiscounted cash flow models, which include assumptions regarding projected cash flows, we would perform a discounted cash flow analysis to assess impairments on long-lived assets. Variances in these assumptions could have a significant impact on our conclusion as to whether an asset is impaired or the amount of any impairment charge. Impairment charges, if any, result in situations where any fair values of these assets are less than their carrying values.

In addition to our recoverability assessments, we routinely review the remaining estimated useful lives of our long-lived assets. Any reduction in the useful life assumption will result in increased depreciation and amortization expense in the quarter when such determinations are made, as well as in subsequent quarters.

We will continue to evaluate the values of our long-lived assets in accordance with applicable accounting rules. As changes in business conditions and our assumptions occur, we may be required to record impairment charges.

Income Taxes.    We currently have $165.9 million of net deferred tax assets, primarily a result of tax credits, net operating losses, and timing differences for reserves, accrued liabilities, stock options, purchased technologies and capitalized intangibles, partially offset by the establishment of U.S. deferred tax liabilities on unremitted earnings from certain foreign subsidiaries, deferred tax liabilities associated with tax method change on advanced payments and valuation allowances against California and Canadian deferred tax assets. We perform a quarterly assessment of the recoverability of these net deferred tax assets and believe that we will generate sufficient future taxable income in appropriate tax jurisdictions to realize the net deferred tax assets. Our judgments regarding future profitability may change due to future market conditions and other factors, including intercompany transfer pricing adjustments. Any change in future profitability may require material adjustments to these net deferred tax assets, resulting in a reduction in net income in the period when such determination is made. We believe our tax positions, including intercompany transfer pricing policies, are consistent with the tax laws in the jurisdictions in which we conduct our business. It is possible that these positions may be challenged by jurisdictional tax authorities and may have a significant impact on our effective tax rate.

Stock-Based Compensation.    We measure stock-based compensation cost at the grant date fair value of the award, and recognize expense on a straight-line basis over the requisite service period, which is generally the vesting period. We estimate

30

the fair value of stock-based payment awards (including grants of stock options and employee stock purchases related to the employee stock purchase plan) using the Black-Scholes-Merton option-pricing model. The determination of the fair value of a stock-based award on the date of grant using the Black-Scholes-Merton option-pricing model is affected by our stock price on the date of grant as well as assumptions regarding a number of complex and subjective variables. These variables include our expected stock price volatility over the expected term of the award, actual and projected employee stock option exercise behaviors, the risk-free interest rate for the expected term of the award and expected dividends. The variables used in the model are reviewed on a quarterly basis and adjusted, as needed. Share-based compensation cost for restricted stock is measured on the closing fair market value of our commons stock on the date of grant. The value of the portion of the award that is ultimately expected to vest is recognized as expense in our Consolidated Statements of Operations.

Legal Contingencies.    As described in Part I, Item 3, “Legal Proceedings” and Part II, Item 8, Note 8, “Commitments and Contingencies,” in the Notes to Consolidated Financial Statements, we are periodically involved in various legal claims and proceedings. We routinely review the status of each significant matter and assess our potential financial exposure. If the potential loss from any matter is considered probable and the amount can be reasonably estimated, we record a liability for the estimated loss. Because of inherent uncertainties related to these legal matters, we base our loss accruals on the best information available at the time. As additional information becomes available, we reassess our potential liability and may revise our estimates. Such revisions could have a material impact on future quarterly or annual results of operations.

Recently Issued Accounting Standards

See Part II, Item 8, Note 1, “Business and Summary of Significant Accounting Policies,” in the Notes to Consolidated Financial Statements for a full description of recent accounting pronouncements, including the expected dates of adoption and estimated effects on results of operations and financial condition, which is incorporated herein by reference.

Overview of Fiscal 2012

	Fiscal Year Ended		As a % of Net Revenue		Fiscal Year Ended		As a % of Net Revenue
	January 31, 2012				January 31, 2011
	(in millions)
Net Revenue	$	2,215.6	100	%	$	1,951.8	100	%
Cost of revenue	229.1		10	%	196.6		10	%
Gross Profit	1,986.5		90	%	1,755.2		90	%
Operating expenses	1,630.9		74	%	1,483.8		76	%
Income from Operations	$	355.6	16	%	$	271.4	14	%

Our business grew year over year as evidenced by our increases in revenue, gross profit and income from operations. During fiscal 2012, as compared to fiscal 2011, net revenue increased14%, gross profit increased13% and income from operations increased31%. Contributing to the year over year increases in revenue were increases in revenue from new seat licenses, maintenance revenue, revenue for most of our major products, all of our reportable segments, and all of our geographies during fiscal 2012 as compared to the prior fiscal year. The reasons for these increases are discussed below under the heading "Results from Operations." In addition, we continued to make progress in controlling our operating costs, which led to year over year improvements in profitability. The 31% increase in income from operations in fiscal 2012, as compared to fiscal 2011, was due to the increase in our net revenue, while controlling the growth of operating expenses.

Our total operating margin increased as a percentage from 14% for fiscal 2011 to 16% for fiscal 2012. The increase in our operating margin was primarily due to net revenue increasing at a faster rate than the increase in our costs due to our cost containment efforts during fiscal 2012. Net revenue increased$263.8 million or 14% for fiscal 2012, as compared to fiscal 2011, while our operating expenses increased $147.1 million, or 10% for fiscal 2012. The 10% increase in operating expenses in fiscal 2012, as compared to fiscal 2011, was due to an increase in salaries and benefits related to increased headcount and the return of employee costs which were temporarily suppressed in the prior year through salary reductions, employee incentives reductions and mandatory vacation, and other costs associated with higher revenue. These increases were partially offset by the decrease in restructuring charges of $12.1 million.

We believe net revenue for fiscal 2013 will increase by approximately 10% compared to fiscal 2012. We anticipate fiscal 2013 operating margin will increase by approximately 130 basis points compared to fiscal 2012.

We generate a significant amount of our revenue in the U.S., Japan, Germany, the United Kingdom and France. Included in the overall increase in revenue were impacts associated with foreign currency. Our revenue benefited from foreign exchange

31

rate changes during fiscal 2012, as compared to fiscal 2011. Had applicable exchange rates from fiscal 2011 been in effect during fiscal 2012 and had we excluded foreign exchange hedge gains and losses from fiscal 2012, (“on a constant currency basis”), net revenue would have increased12% compared to the prior fiscal year. During fiscal 2012, total spend, defined as cost of revenue plus operating expenses, increased11% compared to the prior fiscal year as reported and increased13% on a constant currency basis. Changes in the value of the U.S. dollar may have a significant effect on net revenue, total spend and income from operations in future periods. We use foreign currency contracts to reduce the exchange rate effect on a portion of the net revenue of certain anticipated transactions, but do not attempt to completely mitigate the impact of fluctuation of such foreign currency against the U.S. dollar.

We rely significantly upon major distributors and resellers in both the U.S. and international regions, including Tech Data Corporation and its global affiliates (collectively, “Tech Data”). Tech Data accounted for 17% and 16% of our consolidated net revenue during fiscal year 2012 and 2011, respectively. On October 27, 2011, Tech Data purchased certain assets of Mensch und Maschine Software (“MuM”), which has been a distributor of our products in Europe. The acquisition concentrates additional sales through Tech Data, which on a consolidated basis would have accounted for 21% and 22% of our net revenue for fiscal years 2012 and 2011, respectively, if the acquisition had taken place at the beginning of fiscal 2011.We believe our business is not substantially dependent on Tech Data. Our customers through Tech Data are the resellers and end users who purchase our software licenses and services. Should any of the agreements between us and Tech Data be terminated for any reason, we believe the resellers and end users who currently purchase our products through Tech Data would be able to continue to do so under substantially the same terms from one of our many other distributors without substantial disruption to our revenue.

Our primary goals for fiscal 2013 are to grow revenue and improve our operating margin percentage by delivering our market-leading products and solutions to our customers and investing in product functionality and new product lines, including suites offerings. However, there can be no assurance that we will achieve our financial goals and improve our financial results. Additionally, we believe that unemployment rates and the availability of credit to major industries we serve are important indicators for our business; if global economic conditions deteriorate we may not achieve our financial goals.

Revenue from flagship products was 58% of total net revenue during fiscal 2012, respectively, and increased8% for fiscal 2012, as compared to fiscal 2011. Revenue from suites was 27% of total net revenue for fiscal 2012, and increased31% as compared to fiscal 2011. During fiscal 2012, we released our new design and creation suites that include English language versions of our Autodesk Design Suite, Autodesk Factory Design Suite, Autodesk Product Design Suite, Autodesk Building Design Suite, Autodesk Entertainment Creation Suite, Autodesk Infrastructure Design Suite and Autodesk Plant Design Suite, as well as a Japanese language version of our Autodesk Entertainment Creation Suite. Suites revenue and growth rates for suites consist primarily of revenue from our pre-existing suite families, such as Inventor and Revit suites. Revenue from new and adjacent products was 16% of total net revenue during the fiscal 2012, and increased8% as compared to fiscal 2011. We anticipate, as our new and existing customers migrate from our stand-alone products, that our revenue from suites will increase as a percentage of revenue and that our revenue from our flagship and new and adjacent products will decline as a percentage of revenue.

At January 31, 2012, we had $1,604.1 million in cash and marketable securities. We completed fiscal 2012 with a higher deferred revenue balance and a higher accounts receivable balance as compared to fiscal 2011. Our deferred revenue balance at January 31, 2012 included $633.3 million of customer maintenance contracts, which will be recognized as revenue ratably over the life of the contracts. Our maintenance contracts are for a term of one year, but may be two or three year, or occasionally as long as five year terms. We repurchased 9.7 million shares of our common stock for $327.4 million during fiscal 2012. Comparatively, we repurchased 9.0 million shares of our common stock for $280.3 million during fiscal 2011.

32

Results of Operations

Net Revenue

	Fiscal Year Ended January 31, 2012		Increase compared to prior fiscal year				Fiscal Year Ended January 31, 2011		Increase (decrease) compared to prior fiscal year					Fiscal Year Ended January 31, 2010
			$		%				$			%
	(in millions)
Net Revenue:
License and other	$	1,357.6	$	185.5	16	%	$	1,172.1	$	191.4		20	%	$	980.7
Maintenance	858.0		78.3		10	%	779.7		46.7			6	%	733.0
	$	2,215.6	$	263.8	14	%	$	1,951.8	$	238.1		14	%	$	1,713.7
Net Revenue by Geographic Area:
Americas	$	798.5	$	97.0	14	%	$	701.5	$	47.1		7	%	$	654.4
Europe, Middle East and Africa	862.2		79.4		10	%	782.8		111.7			17	%	671.1
Asia Pacific	554.9		87.4		19	%	467.5		79.3			20	%	388.2
	$	2,215.6	$	263.8	14	%	$	1,951.8	$	238.1		14	%	$	1,713.7
Net Revenue by Operating Segment:
Platform Solutions and Emerging Business	$	833.1	$	116.9	16	%	$	716.2	$	92.2		15	%	$	624.0
Architecture, Engineering and Construction	626.4		58.4		10	%	568.0		54.7			11	%	513.3
Manufacturing	540.3		70.3		15	%	470.0		83.1			22	%	386.9
Media and Entertainment	215.8		18.2		9	%	197.6		8.5			4	%	189.1
Other	—		—		—		—		(0.4		)	(100	)%	0.4
	$	2,215.6	$	263.8	14	%	$	1,951.8	$	238.1		14	%	$	1,713.7

Fiscal 2012 Net Revenue Compared to Fiscal 2011 Net Revenue

License and Other Revenue

License and other revenue is comprised of two components: all forms of product license revenue and other revenue. Product license revenue includes revenue from the sale of new seat licenses and upgrades. Other revenue consists of revenue from Creative Finishing, consulting and training services and hosted technology solutions.

Total license and other revenue increased16% during fiscal 2012 as compared to fiscal 2011. This increase was primarily due to the 16% increase in revenue from commercial new seat licenses during fiscal 2012 as compared to fiscal 2011. During fiscal 2012, 13 percentage points of the 16% increase was due to the increase in the number of seats sold, and 3 percentage points was due to an increase in the average net revenue per seat. Commercial new seat revenue, as a percentage of license and other revenue, was 67% for both fiscal 2012 and 2011.

Also contributing to the increase in license and other revenue during fiscal 2012, as compared to fiscal 2011, was the 14% increase in upgrade revenue. Upgrade revenue increased during fiscal 2012 in comparison to fiscal 2011 primarily due to an ACAD LT upgrade promotion during the first quarter of fiscal 2012, an increase in large enterprise transactions, customers migrating from stand-alone products to suites and a promotion that was run related to the education solutions suites.

Backlog related to current software license product orders that had not shipped at the end of the quarter decreased by $0.4 million during fiscal 2012 from $27.5 million at January 31, 2011 to $27.1 million at January 31, 2012. Backlog from current software license product orders that we have not yet shipped consists of orders for currently available licensed software products from customers with approved credit status and may include orders with current ship dates and orders with ship dates beyond the current fiscal period.

Revenue from the sales of our services, training and support, included in “License and other revenue,” represented less than 3% of net revenue for all periods presented.

33

Maintenance Revenue

Our maintenance revenue relates to a program known by our user community as the Subscription Program. Our maintenance program provides our commercial and educational customers with a cost effective and predictable budgetary option to obtain the productivity benefits of our new releases and enhancements when and if released during the term of their contracts. Under our maintenance program, customers are eligible to receive unspecified upgrades when and if available, downloadable training courses and online support. We recognize maintenance revenue ratably over the maintenance contract periods.

Maintenance revenue increased10% during fiscal 2012, as compared to fiscal 2011, primarily due to a 10% increase in commercial maintenance revenue. The 10% increase in commercial maintenance revenue was due to an 8 percentage point increase in commercial enrollment during the corresponding maintenance contract term and a 2 percentage point increase in net revenue per maintenance seat. Commercial maintenance revenue represented 98% of maintenance revenue for both fiscal 2012 and 2011. Total subscription program enrollment at January 31, 2012 and 2011 consisted of about 3.2 million users and 2.9 million users, respectively.

Changes in maintenance revenue lag changes in net billings for maintenance contracts because we recognize the revenue from those contracts ratably over their contract terms. Our maintenance contracts are for a term of predominantly one year, but may be two or three year, or occasionally as long as five year, terms. Net maintenance billings increased 19% during fiscal 2012 as compared to fiscal 2011. This increase was due to an increase in maintenance renewals, new multi-year maintenance contracts, and the impact from the upgrade promotions mentioned above in "License and Other Revenue."

Deferred revenue for fiscal 2012 and 2011 was $719.2 million and $587.9 million, respectively. Deferred revenue consists primarily of deferred maintenance revenue. To a lesser extent, deferred revenue consists of deferred license and other revenue derived from hosted technology solutions, consulting services and deferred license sales.

Net Revenue by Geographic Area

Net revenue in the Americas geography increased by 14% both as reported and constant currency basis, during fiscal 2012, as compared to fiscal 2011. This increase was primarily due to a 14% increase in revenue from new seats during fiscal 2012 as compared to fiscal 2011. Maintenance revenue increased 10% during fiscal 2012 as compared to fiscal 2011. This increase in our revenue in this geography was led by the U.S. and Canada.

Net revenue in the EMEA geography increased by 10% both as reported and constant currency basis, during fiscal 2012 as compared to fiscal 2011. The increase was primarily due to a 14% increase in new seat revenue and a 6% increase in maintenance revenue. The increase in our revenue in this geography was led by the Russian Federation, Belgium, United Kingdom and Germany.

Net revenue in the APAC geography increased by 19%, or 12% on a constant currency basis, during fiscal 2012, as compared to fiscal 2011, primarily due to a 20% increase in new seat revenue and a 21% increase in maintenance revenue. Net revenue expansion in the APAC geography during fiscal 2012 occurred in virtually all countries, led by Japan and followed by Australia and South Korea.

Net revenue in emerging economies increased by 16%, or 13% on a constant currency basis, during fiscal 2012 as compared to fiscal 2011, primarily due to revenue from the Russian Federation, India, Mexico, and Brazil. This growth was a significant factor in our international sales growth during fiscal 2012. Revenue from emerging economies represented 16% of net revenue for fiscal 2012 and 15% for fiscal 2011.

International net revenue represented 72% and 71% of our net revenue in fiscal 2012 and fiscal 2011, respectively. We believe that international revenue will continue to comprise a majority of our total net revenue. Unfavorable economic conditions in the countries that contribute a significant portion of our net revenue may have an adverse effect on our business in those countries and our overall financial performance. Changes in the value of the U.S. dollar relative to other currencies have significantly affected, and could continue to significantly affect, our financial results for a given period even though we hedge a portion of our current and projected revenue. Additionally, the U.S. credit-rating downgrade and weak global economic conditions that have been characterized by restructuring of sovereign debt, high unemployment, and volatility in the financial markets may impact our future financial results.

Net Revenue by Operating Segment

We have four reportable segments: Platform Solutions and Emerging Business (“PSEB”), Architecture, Engineering and Construction (“AEC”), Manufacturing (“MFG”) and Media and Entertainment (“M&E”). We have no material inter-segment revenue.

34

Net revenue for PSEB, which includes our Autodesk Design Suite, increased16% during fiscal 2012, as compared to fiscal 2011, primarily due to a 15% increase in revenue from our AutoCAD LT products.

Net revenue for AEC increased10% during fiscal 2012, as compared to fiscal 2011, primarily due to a 10% increase in revenue from our Revit family of products.

Net revenue for MFG increased15% during fiscal 2012, as compared to fiscal 2011, primarily due to a 14% increase in revenue from our Autodesk Inventor family of products and a 24% increase in our AutoCAD Electrical products.

Net revenue for M&E increased9% during fiscal 2012, as compared to fiscal 2011, primarily due to a 15% increase in revenue from our Animation product group, which includes our Autodesk Entertainment Creation Suite, offset by a 3% decrease in revenue from Creative Finishing. The increase in Animation revenue was primarily due to a 13% increase in revenue from Autodesk Maya related products.

Fiscal 2011 Net Revenue Compared to Fiscal 2010 Net Revenue

License and Other Revenue

Total license and other revenue increased 20% during fiscal 2011 as compared to fiscal 2010. This increase was primarily due to the 31% increase in commercial new seat revenue during fiscal 2011 as compared to fiscal 2010. During fiscal 2011, 28 percentage points of the 31% increase was due to the increase in the number of seats sold, and 3 percentage points was due to higher average net revenue per seat. Commercial new seat revenue, as a percentage of license and other revenue, was 67% and 61% for fiscal 2011 and 2010, respectively.

Also contributing to the increase in license and other revenue during fiscal 2011, as compared to fiscal 2010, was the 22% increase in upgrade revenue, which includes crossgrade revenue. Upgrade revenue was higher during fiscal 2011 primarily due to a one-time increase in upgrades in response to a promotion in advance of the March 2010 increase in upgrade pricing, an additional promotion run in the Americas geography in the fourth quarter and an increase in the number of larger revenue transactions in fiscal 2011 as compared to fiscal 2010.

Backlog related to current software license product orders that had not shipped at the end of the quarter increased by $1.5 million during fiscal 2011 from $26.0 million at January 31, 2010 to $27.5 million at January 31, 2011.

Maintenance Revenue

Maintenance revenue increased 6% during fiscal 2011, as compared to fiscal 2010, primarily due to a 7% increase in commercial maintenance revenue. Total subscription program enrollment at January 31, 2011 and 2010 consisted of about 2.9 million users and 2.2 million users, respectively.

The 7% increase in commercial maintenance revenue was due to a 5 percentage point increase in net revenue per maintenance seat and a 2 percentage point increase in commercial enrollment during the corresponding maintenance contract term. Commercial maintenance revenue represented 98% of maintenance revenue for both fiscal 2011 and 2010.

Net maintenance billings increased 14% during fiscal 2011 as compared to fiscal 2010. This increase was due to an increase in renewals, more new seats sold and the impact from the upgrade pricing promotion mentioned above.

Deferred revenue at January 31, 2011 and January 31, 2010, was $587.9 million and $516.5 million, respectively.

Net Revenue by Geographic Area

Net revenue in the Americas geography increased by 7% both as reported and on a constant currency basis, during fiscal 2011, as compared to fiscal 2010. This increase was primarily due to a 33% increase in revenue from new seats during fiscal 2011 as compared to fiscal 2010. Maintenance revenue increased 3% during fiscal 2011 as compared to fiscal 2010. The Americas was affected by slower economic growth than our other geographies, which impacted growth rates for all of our products during fiscal 2011.

Net revenue in the EMEA geography increased by 17%, or 13% on a constant currency basis, during fiscal 2011 as compared to fiscal 2010. The increase was primarily due to a 24% increase in new seat revenue and a 9% increase in maintenance revenue. The EMEA geography’s increase in revenue during fiscal 2011 was primarily due to economic expansion in virtually all countries in that geography. The increase in our revenue in that geography was led by Germany, France, the United Kingdom and Belgium.

35

Net revenue in the APAC geography increased by 20%, or 16% on a constant currency basis, during fiscal 2011, as compared to fiscal 2010, primarily due to a 24% increase in new seat revenue and a 48% increase in upgrade revenue. Net revenue expansion in the APAC geography during fiscal 2011 occurred in virtually all countries, led by Japan and followed by South Korea, Australia and India.

Net revenue in emerging economies increased 17% during fiscal 2011 as compared to fiscal 2010, primarily due to revenue from China, the Russian Federation, India, Brazil and Poland. This growth was a significant factor in our international sales growth during fiscal 2011. Revenue from emerging economies represented 15% of net revenue for both fiscal 2011 and 2010.

International net revenue represented 71% of our net revenue in fiscal 2011 and 69% of our net revenue in fiscal 2010.

Net Revenue by Operating Segment

We have four reportable segments: Platform Solutions and Emerging Business (“PSEB”), Architecture, Engineering and Construction (“AEC”), Manufacturing (“MFG”) and Media and Entertainment (“M&E”). Location Services, which we disposed of in February 2009, is not included in any of the above reportable segments and is reflected as Other.

Net revenue for PSEB increased 15% during fiscal 2011, as compared to fiscal 2010, primarily due to a 20% increase in revenue from both our AutoCAD and AutoCAD LT products, offset by a net 21% decrease in revenue from all other PSEB products and services.

Net revenue for AEC increased 11% during fiscal 2011, as compared to fiscal 2010, primarily due to a 24% increase in revenue from our Revit products, a 6% increase in revenue from our AutoCAD Civil 3D products, and a 27% increase in revenue from our Navisworks products.

Net revenue for MFG increased 22% during fiscal 2011, as compared to fiscal 2010, primarily due to a 23% increase in revenue from our Autodesk Inventor products and a 28% increase in our AutoCAD Mechanical products.

Net revenue for M&E increased 4% during fiscal 2011, as compared to fiscal 2010, primarily due to a 5% increase in revenue from our Animation product group and a 3% increase in revenue from Creative Finishing. The increase in Animation revenue was primarily due to a 4% increase in revenue from Autodesk 3ds Max.

Cost of Revenue and Operating Expenses

Cost of Revenue

	Fiscal Year Ended January 31, 2012			Increase compared to prior fiscal year				Fiscal Year Ended January 31, 2011			Increase (decrease) compared to prior fiscal year					Fiscal Year Ended January 31, 2010
				$		%					$			%
	(in millions)
Cost of revenue:
License and other	$	187.1		$	24.9	15	%	$	162.2		$	(9.8	)	(6	)%	$	172.0
Maintenance	42.0			7.6		22	%	34.4			14.6			74	%	19.8
	$	229.1		$	32.5	17	%	$	196.6		$	4.8		3	%	$	191.8
As a percentage of net revenue	10		%					10		%						11		%

Cost of license and other revenue includes labor costs of order fulfillment and costs of fulfilling consulting and training services contracts and collaborative project management services contracts. Cost of license and other revenue also includes stock-based compensation expense, direct material and overhead charges, amortization of purchased technology, professional services fees and royalties. Direct material and overhead charges include the cost of hardware sold (mainly PC-based workstations for Creative Finishing in the M&E segment), costs associated with transferring our software to electronic media, printing of user manuals and packaging materials and shipping and handling costs.

Cost of license and other revenue increased15% during fiscal 2012, as compared to fiscal 2011 primarily due to increased support costs and lower margin consulting engagements. Cost of license and other revenue decreased6% during fiscal 2011, as compared to fiscal 2010 primarily due to savings on shipping and handling costs resulting from the switch to a

36

lower cost vendor as well as an increase in electronic order fulfillment.

Cost of maintenance revenue includes labor costs of providing product support to our maintenance customers, including stock-based compensation expense for these employees, rent and occupancy, shipping and handling costs and professional services fees. Cost of maintenance revenue increased22% during fiscal 2012 as compared to fiscal 2011 due to an increase in maintenance support headcount and increased annual fulfillment costs related to supplying USB flash drives of our suites products. Cost of maintenance revenue increased74% during fiscal 2011 as compared to fiscal 2010 due to an increase in maintenance support headcount. These increases were partially offset by savings on freight and materials costs as fewer maintenance customers require physical shipments than in the past due to electronic fulfillment.

Cost of revenue, at least over the near term, is affected by the volume and mix of product sales, mix of physical versus electronic fulfillment, fluctuations in consulting costs, amortization of purchased technology, new customer support offerings, royalty rates for licensed technology embedded in our products, and employee stock-based compensation expense. We expect cost of revenue to increase in absolute dollars, but to remain relatively consistent as a percentage of net revenue during fiscal 2013, as compared to fiscal 2012.

Marketing and Sales

	Fiscal Year Ended January 31, 2012			Increase compared to prior fiscal year				Fiscal Year Ended January 31, 2011			Increase compared to prior fiscal year				Fiscal Year Ended January 31, 2010
				$		%					$		%
	(in millions)
Marketing and sales	$	842.6		$	66.6	9	%	$	776.0		$	44.1	6	%	$	731.9
As a percentage of net revenue	38		%					40		%					43		%

Marketing and sales expenses include salaries, bonuses, benefits, and stock-based compensation expense for our marketing and sales employees, and the expense of travel, entertainment and training for such personnel, and the costs of programs aimed at increasing revenue, such as advertising, trade shows and expositions, and various sales and promotional programs. Marketing and sales expenses also include labor costs of sales and order processing, sales and dealer commissions, rent and occupancy, and the cost of supplies and equipment.

Marketing and sales expenses increased9% during fiscal 2012, as compared to fiscal 2011, primarily due to higher employee-related costs related to salaries and fringe benefits primarily associated with increased head count and the reinstatement of merit increases in fiscal 2012. Marketing and sales expenses increased6% during fiscal 2011, as compared to fiscal 2010, primarily due to higher employee-related costs related to variable compensation, including commissions, bonuses and related fringe benefits. Variable compensation expenses increased as a result of exceeding our fiscal 2011 target revenue growth and operating margins growth targets more than we did in fiscal 2010. Our annual incentive plans are based on forecasted revenue and operating margin, with current year targets set at the beginning of the fiscal year. These increases were partially offset by the decrease in advertising and promotion spending and stock-based compensation expense.

We expect to balance our need to invest in the marketing and sales of our products with our desire to actively manage our sales and marketing operating expenses. As a result, we expect marketing and sales expense to increase in absolute dollars, but remain relatively consistent as a percentage of net revenue in fiscal 2013, as compared to fiscal 2012.

Research and Development

	Fiscal Year Ended January 31, 2012			Increase compared to prior fiscal year				Fiscal Year Ended January 31, 2011			Increase compared to prior fiscal year				Fiscal Year Ended January 31, 2010
				$		%					$		%
	(in millions)
Research and development	$	566.5		$	70.3	14	%	$	496.2		$	38.7	8	%	$	457.5
As a percentage of net revenue	26		%					25		%					27		%

Research and development expenses, which are expensed as incurred, consist primarily of salaries, bonuses, benefits and

37

stock-based compensation expense for research and development employees, and the expense of travel, entertainment and training for such personnel, rent and occupancy, professional services such as fees paid to software development firms and independent contractors.

Research and development expenses increased14% during fiscal 2012, as compared to fiscal 2011, primarily due to an increase in salaries and fringe benefits primarily associated with increased headcount and the reinstatement of merit increases in fiscal 2012, and to an increase in professional service fees in fiscal 2012 as compared to fiscal 2011. Research and development expenses increased8% during fiscal 2011, as compared to fiscal 2010, primarily due to an increase in bonuses, salaries and benefits.

We expect research and development expense to increase in absolute dollars, but remain relatively consistent as a percentage of net revenue during fiscal 2013, as compared to fiscal 2012, as we continue to invest in product development and acquire new technology in fiscal 2013.

General and Administrative

	Fiscal Year Ended January 31, 2012			Increase compared to prior fiscal year				Fiscal Year Ended January 31, 2011			Increase compared to prior fiscal year				Fiscal Year Ended January 31, 2010
				$		%					$		%
	(in millions)
General and administrative	$	223.1		$	22.3	11	%	$	200.8		$	3.1	2	%	$	197.7
As a percentage of net revenue	10		%					10		%					12		%

General and administrative expenses include salaries, bonuses, benefits and stock-based compensation expense for our finance, human resources and legal employees, as well as professional fees for legal and accounting services, amortization of acquisition related customer relationships and trade names, expense of travel, entertainment and training, expense of communication and the cost of supplies and equipment.

General and administrative expenses increased11% from fiscal 2011 to fiscal 2012 primarily due to an increase in amortization of acquisition related customer relationships and trade names and the increase in salaries primarily associated with increased head count and the reinstatement of merit increases in fiscal 2012. General and administrative expenses increased2% from fiscal 2010 to fiscal 2011 primarily due to an increase in bonuses and salaries partially offset by a decrease in stock based compensation expense.

We expect general and administrative expense to increase in absolute dollars, but remain consistent as a percentage of net revenue during fiscal 2013, as compared to fiscal 2012.

Restructuring

	Fiscal Year Ended January 31, 2012			Decrease compared to prior fiscal year					Fiscal Year Ended January 31, 2011			Decrease compared to prior fiscal year					Fiscal Year Ended January 31, 2010
				$			%					$			%
	(in millions)
Restructuring	$	(1.3	)	$	(12.1	)	(112	)%	$	10.8		$	(37.4	)	(78	)%	$	48.2
As a percentage of net revenue	—		%						1		%						3		%

During fiscal 2011, 2010 and 2009 we initiated restructuring plans in order to further reduce operating costs. These restructuring plans resulted in targeted global staff reductions of approximately 200, 430 and 700 positions for fiscal 2011, 2010 and 2009, respectively. No leased facilities were consolidated as part of the fiscal 2011 restructuring plan. The fiscal 2010 and 2009 restructuring plans resulted in the consolidation of approximately 32 and 27 leased facilities, respectively. In connection with these restructuring programs, we recorded a favorable adjustment for changes in previous estimates of $1.3 million in fiscal 2012 and we recorded restructuring related charges of $10.8 million and $48.2 million during fiscal 2011 and

38

2010, respectively. The one-time termination benefits for these three restructuring programs were substantially paid as of January 31, 2011. We expect to pay the facility-related liabilities through fiscal 2018. See Note 15, “Restructuring Reserves,” in Notes to Consolidated Financial Statements for further discussion.

Impairment of Goodwill and Intangibles

	Fiscal Year Ended January 31, 2012			Increase compared to prior fiscal year				Fiscal Year Ended January 31, 2011			Decrease compared to prior fiscal year					Fiscal Year Ended January 31, 2010
				$		%					$			%
	(in millions)
Impairment of goodwill	$	—		$	—	—	%	$	—		$	(21.0	)	(100	)%	$	21.0
As a percentage of net revenue	—		%					—		%						1		%

We did not record an impairment charge during fiscal 2012 or 2011. During fiscal 2010, we recorded an impairment charge of $21.0 million representing the entire goodwill balance of our M&E segment as of April 30, 2009. This goodwill balance related to our M&E segment’s fourth quarter fiscal 2009 acquisition of substantially all of the assets of Softimage.

Should our revenue and cash flow projections decline significantly in the future, additional impairment charges may be recorded to goodwill. As of January 31, 2012, a hypothetical 10% decrease in the fair value of our reporting units would not have an impact on the carrying value of goodwill, nor result in impairment of goodwill. See Note 1, “Business and Summary of Significant Accounting Policies,” in Notes to Consolidated Financial Statements for further discussion.

Interest and Other Income, Net

The following table sets forth the components of interest and other income, net:

	Fiscal Year Ended January 31,
	2012			2011			2010
	(in millions)
Interest and investment income, net	$	5.7		$	10.9		$	10.0
Gain (loss) on foreign currency	(1.1		)	(14.0		)	5.0
Other income	2.7			3.7			4.1
Interest and other income, net	$	7.3		$	0.6		$	19.1

Interest and other income, net, increased $6.7 million during fiscal 2012, as compared to fiscal 2011, primarily due to improved foreign currency remeasurements. The loss on foreign currency in fiscal 2012 and 2011 is primarily due to the impact of re-measuring foreign currency transactions into the functional currency of the corresponding entity. The amount of gain (loss) on foreign currency is driven by the volume of foreign currency transactions and the foreign currency exchange rates for the period.

Interest and investment income, net, fluctuates based on average cash and marketable securities balances, average maturities and interest rates. The decrease in Interest and investment income, net, during fiscal 2012 as compared to fiscal 2011 is primarily due to the decrease in the fair value of our trading securities that are marked to market each period.

Interest and other income, net, decreased $18.5 million during fiscal 2011, as compared to fiscal 2010, primarily due to foreign currency losses.

Provision for Income Taxes

We account for income taxes and the related accounts under the liability method. Deferred tax liabilities and assets are determined based on the difference between the financial statement and tax bases of assets and liabilities, using enacted rates expected to be in effect during the year in which the basis differences reverse.

Our effective tax rate was 21% and 22% during fiscal 2012 and 2011, respectively. Our effective tax rate decreased one percentage point from fiscal 2011 to fiscal 2012 primarily due to an increase in tax benefits from foreign earnings taxed at different rates in fiscal 2012 compared to fiscal 2011, partially offset by tax benefits associated with closure of audits in fiscal

39

2011.

Our effective tax rate was 22% and 32% during fiscal 2011 and 2010, respectively. Our effective tax rate decreased 10 percentage points from fiscal 2010 to fiscal 2011 primarily due to a change in expected future tax rates, the establishment of the California valuation allowance in fiscal 2010 and a decrease in non-deductible stock-based compensation expense, offset by a decrease in tax benefits from foreign earnings taxed at different rates in fiscal 2011 compared to fiscal 2010. During the first quarter of fiscal 2010, the State of California enacted legislation significantly altering California tax law. As a result of the newly enacted legislation, we expect that in fiscal years 2012 and beyond, income subject to tax in California will be less than under prior tax law and accordingly, deferred tax assets are less likely to be realized.

Our future effective tax rate may be materially impacted by the amount of benefits and charges from tax amounts associated with our foreign earnings that are taxed at rates different from the federal statutory rate, research credits, state income taxes, the tax impact of stock-based compensation, accounting for uncertain tax positions, business combinations, U.S. Manufacturer's deduction, closure of statute of limitations or settlement of tax audits, changes in valuation allowances and changes in tax laws including possible U.S. tax law changes that, if enacted, could significantly impact how U.S. multinational companies are taxed on foreign subsidiary earnings. A significant amount of our earnings is generated by our Europe and Asia Pacific subsidiaries. Our future effective tax rates may be adversely affected to the extent earnings are lower than anticipated in countries where we have lower statutory tax rates or we repatriate certain foreign earnings on which U.S. taxes have not previously been provided.

At January 31, 2012, we had net deferred tax assets of $165.9 million. We believe that we will generate sufficient future taxable income in appropriate tax jurisdictions to realize these assets.

For additional information regarding our income tax provision and reconciliation of our effective rate to the federal statutory rate of 35%, see Note 4, “Income Taxes,” in the Notes to Consolidated Financial Statements.

Other Financial Information

In addition to our results determined under U.S. generally accepted accounting principles (“GAAP”) discussed above, we believe the following non-GAAP measures are useful to investors in evaluating our operating performance. For the fiscal years ended January 31, 2012, 2011 and 2010, our gross profit, gross margin, income from operations, operating margin, net income and diluted earnings per share on a GAAP and non-GAAP basis were as follows (in millions except for gross margin, operating margin and per share data):

	January 31, 2012			January 31, 2011			January 31, 2010
				(Unaudited)
Gross profit	$	1,986.5		$	1,755.2		$	1,521.9
Non-GAAP gross profit	$	2,028.4		$	1,790.0		$	1,557.9
Gross margin	90		%	90		%	89		%
Non-GAAP gross margin	92		%	92		%	91		%
Income from operations	$	355.6		$	271.4		$	65.6
Non-GAAP income from operations	$	533.4		$	418.8		$	286.8
Operating margin	16		%	14		%	4		%
Non-GAAP operating margin	24		%	21		%	17		%
Net income	$	285.3		$	212.0		$	58.0
Non-GAAP net income	$	405.4		$	310.4		$	229.2
Diluted earnings per share	$	1.22		$	0.90		$	0.25
Non-GAAP diluted earnings per share	$	1.74		$	1.32		$	0.99

For our internal budgeting and resource allocation process, we use non-GAAP measures to supplement our consolidated financial statements presented on a GAAP basis. These non-GAAP measures do not include certain items that may have a material impact upon our reported financial results. We use non-GAAP measures in making operating decisions because we believe those measures provide meaningful supplemental information regarding our earning potential. In addition, these non-GAAP financial measures facilitate comparisons to our and our competitors' historical results and operating guidance. We also use these measures for purposes of determining company-wide incentive compensation.

There are limitations in using non-GAAP financial measures because non-GAAP financial measures are not prepared in

40

accordance with GAAP and may be different from non-GAAP financial measures used by other companies. The non-GAAP financial measures included above are limited in value because they exclude certain items that may have a material impact upon our reported financial results. In addition, they are subject to inherent limitations as they reflect the exercise of judgments by management about which charges are excluded from the non-GAAP financial measures. We compensate for these limitations by analyzing current and future results on a GAAP basis as well as a non-GAAP basis and also by providing GAAP measures in our public disclosures. The presentation of non-GAAP financial information is not meant to be considered in isolation or as a substitute for the directly comparable financial measures prepared in accordance with GAAP. The non-GAAP financial measures are meant to supplement, and be viewed in conjunction with, GAAP financial measures. We urge investors to review the reconciliation of our non-GAAP financial measures to the comparable GAAP financial measures included below, and not to rely on any single financial measure to evaluate our business.

41

Reconciliation of GAAP Financial Measures to Non-GAAP Financial Measures

(In millions except for gross margin, operating margin and per share data):

	Fiscal Year Ended January 31,
	2012			2011			2010
	(Unaudited)
Gross profit	$	1,986.5		$	1,755.2		$	1,521.9
Stock-based compensation expense	3.9			2.9			3.1
Amortization of purchased intangibles(1)	38.0			31.9			32.9
Non-GAAP gross profit	$	2,028.4		$	1,790.0		$	1,557.9
Gross margin	90		%	90		%	89		%
Stock-based compensation expense	—		%	—		%	—		%
Amortization of purchased intangibles	2		%	2		%	2		%
Non-GAAP gross margin	92		%	92		%	91		%
Income from operations	$	355.6		$	271.4		$	65.6
Stock-based compensation expense	108.8			80.7			93.6
Amortization of purchased intangibles(1)	70.3			55.9			58.4
Impairment of goodwill	—			—			21.0
Restructuring charges	(1.3		)	10.8			48.2
Non-GAAP income from operations	$	533.4		$	418.8		$	286.8
Operating margin	16		%	14		%	4		%
Stock-based compensation expense	5		%	4		%	5		%
Amortization of purchased intangibles(1)	3		%	3		%	4		%
Impairment of goodwill	—		%	—		%	3		%
Restructuring charges	—		%	—		%	1		%
Non-GAAP operating margin	24		%	21		%	17		%
Net income	$	285.3		$	212.0		$	58.0
Stock-based compensation expense	108.8			80.7			93.6
Amortization of purchased intangibles(1)	70.3			55.9			58.4
Impairment of goodwill	—			—			21.0
Restructuring charges	(1.3		)	10.8			48.2
Establishment of valuation allowance on deferred tax assets	—			—			21.0
Discrete tax provision items	(6.8		)	(6.0		)	(13.1		)
Income tax effect of non-GAAP adjustments	(50.9		)	(43.0		)	(57.9		)
Non-GAAP net income	$	405.4		$	310.4		$	229.2
Diluted net income per share	$	1.22		$	0.90		$	0.25
Stock-based compensation expense	0.47			0.34			0.40
Amortization of purchased intangibles(1)	0.30			0.24			0.25
Impairment of goodwill	—			—			0.09
Restructuring charges	(0.01		)	0.05			0.21
Establishment of valuation allowance on deferred tax assets	—			—			0.09
Discrete tax provision items	(0.03		)	(0.03		)	(0.04		)
Income tax effect of non-GAAP adjustments	(0.21		)	(0.18		)	(0.26		)
Non-GAAP diluted net income per share	$	1.74		$	1.32		$	0.99

____________________ 

(1) Amortization of purchased intangibles includes amortization of purchased developed technology, customer relationships, and trade names for acquisitions subsequent to December 2005.

42

Our non-GAAP financial measures as set forth in the table above exclude the following:

Stock-based compensation expenses.    We exclude stock-based compensation expenses from non-GAAP measures primarily because they are non-cash expenses and management finds it useful to exclude certain non-cash charges to assess the appropriate level of various operating expenses to assist in budgeting, planning and forecasting future periods.

Amortization of purchased intangibles.    We incur amortization of acquisition-related purchased intangible assets in connection with acquisitions of certain businesses and technologies. The amortization of purchased intangibles varies depending on the level of acquisition activity and management finds it useful to exclude these variable charges to assess the appropriate level of various operating expenses to assist in budgeting, planning and forecasting future periods.

Goodwill impairment.    This is a non-cash charge to write-down goodwill to fair value when there was an indication that the asset was impaired. As explained above, management finds it useful to exclude certain non-cash charges to assess the appropriate level of various operating expenses to assist in budgeting, planning and forecasting future periods.

Restructuring charges.    These expenses are associated with realigning our business strategies based on current economic conditions. In connection with these restructuring actions, we recognize costs related to termination benefits for former employees whose positions were eliminated, and the closure of facilities and cancelation of certain contracts. We exclude these charges because these expenses are not reflective of ongoing financial results in the current period.

Establishment of a valuation allowance on certain net deferred tax assets.    This is a non-cash charge to record a valuation allowance on certain deferred tax assets. As explained above, management finds it useful to exclude certain non-cash charges to assess the appropriate level of various expenses to assist in budgeting, planning and forecasting future periods.

Discrete tax items.  We exclude the GAAP tax provision, including discrete items, from the non-GAAP measure of income, and include a non-GAAP tax provision based upon the projected annual non-GAAP effective tax rate. Discrete tax items include income tax expenses or benefits that do not relate to ordinary income from continuing operations in the current fiscal year, unusual or infrequently occurring items, or the tax impact of certain stock-based compensation. Examples of discrete tax items include, but are not limited to, certain changes in judgment and changes in estimates of tax matters related to prior fiscal years, certain costs related to business combinations, certain changes in the realizability of deferred tax assets or changes in tax law. Management believes this approach assists investors in understanding the tax provision and the effective tax rate related to ongoing operations.

Income tax effects on the difference between GAAP and non-GAAP costs and expenses.  The income tax effects that are excluded from the non-GAAP measures relate to the tax impact on the difference between GAAP and non-GAAP costs and expenses, primarily due to stock-based compensation, purchased intangibles and restructuring for GAAP and non-GAAP measures.

Liquidity and Capital Resources

Our primary source of cash is from the sale of licenses to our products. Our primary use of cash is payment of our operating costs which consist primarily of employee-related expenses, such as compensation and benefits, as well as general operating expenses for marketing, facilities and overhead costs. In addition to operating expenses, we also use cash to invest in our growth initiatives, which include acquisitions of products, technology and businesses and to fund our stock repurchase program. See further discussion of these items below.

At January 31, 2012, our principal sources of liquidity were cash, cash equivalents and marketable securities totaling $1,604.1 million and net accounts receivable of $395.1 million. In addition, we have a line of credit facility that permitted unsecured short-term borrowings of up to $400.0 million that we entered into in May 2011, which replaced our previous $250.0 million line of credit facility that would have expired in August 2012. During fiscal 2012, we had no borrowings or repayments under our current or prior line of credit facility. This credit facility is available for working capital and general corporate purposes and expires in May 2016.

Our cash and cash equivalents are held by diversified financial institutions globally. Our primary commercial banking relationship is with Citibank and its global affiliates (“Citibank”). In addition, Citibank is one of the lead lenders and agent in the syndicate of our $400.0 million line of credit.

The increase in our cash, cash equivalents and marketable securities to $1,604.1 million at January 31, 2012 from $1,466.9 million at January 31, 2011 is principally the result of cash generated from operations and to a lesser extent, the proceeds from the issuance of common stock following stock option exercises and employee stock plan purchases. These increases to cash, cash equivalents and marketable securities were partially offset by cash used for repurchases of our common stock, acquisitions including business combinations and technology purchases, capital expenditures, and other investing

43

activities. Cash generated from operations was positively impacted by higher net revenue.

The primary source for net cash provided by operating activities of $573.5 million for fiscal 2012 was net income of$285.3 million increased by the effect of non-cash expenses totaling $224.3 million associated with depreciation and amortization and stock-based compensation. In addition, net cash flow provided by changes in operating assets and liabilities was $96.7 million. The primary source of working capital was an increase in deferred revenue due to higher maintenance billings and an increase in accounts payable for fiscal 2012 compared to fiscal 2011. The primary working capital uses of cash were increases in accounts receivable due to higher billings and the reduction of accrued expenses primarily related to accrued commissions in fiscal 2012 compared to fiscal 2011. Our days sales outstanding in trade receivables was 61 at January 31, 2012 compared to 55 at January 31, 2011. The increase in days sales outstanding is due to higher billings in the last month of fiscal 2012 compared to the last month of fiscal 2011.

At January 31, 2012, our short-term investment portfolio had an estimated fair value of $254.4 million and a cost basis of $252.6 million. The portfolio fair value consisted of $143.8 million invested in commercial paper and corporate securities, $38.2 million invested in U.S. government agency securities, $31.5 million invested in mutual funds, $5.2 million invested in certificates of deposit and time deposits with remaining maturities at the date of purchase greater than 90 days and less than one year, $30.7 million invested in U.S treasury securities, $4.7 million invested in municipal securities and $0.3 million invested in other short-term securities.

At January 31, 2012, $31.5 million of trading securities were invested in a defined set of mutual funds as directed by the participants in our Deferred Compensation Plan (see Note 6, “Deferred Compensation,” in the Notes to Consolidated Financial Statements for further discussion).

Long-term cash requirements for items other than normal operating expenses are anticipated for the following: the acquisition of businesses, software products, or technologies complementary to our business; stock repurchases; and capital expenditures, including the purchase and implementation of internal-use software applications.

Our strategy includes improving our product functionality and expanding our product offerings through internal development as well as through the acquisition of products, technology and businesses. Acquisitions often increase the speed at which we can deliver product functionality to our customers; however, they entail cost and integration challenges and may, in certain instances, negatively impact our operating margins. We continually review these trade-offs in making decisions regarding acquisitions. We currently anticipate that we will acquire products, technology and businesses as compelling opportunities become available. In fiscal 2012, we increased the number, pace and dollars spent on acquisitions in comparison to fiscal 2011, but our decision to acquire businesses or technology is dependent on our business needs, the availability of suitable sellers and technology, and our own financial condition.

Our cash, cash equivalent and marketable securities balances are primarily denominated and held in U.S. dollar and are concentrated in a few locations around the world, with substantial amounts held outside of the U.S. We believe that such dispersion meets our business and liquidity needs. Certain amounts held outside the U.S. could be repatriated to the U.S. (subject to local law restrictions), but under current U.S. tax law, could be subject to U.S. income taxes less applicable foreign tax credits. We have provided for the U.S. income tax liability on foreign earnings, except for foreign earnings that are considered permanently reinvested outside the U.S. Our intent is that amounts related to foreign earnings permanently reinvested outside the U.S. will remain outside the U.S. and we will meet our U.S. liquidity needs through ongoing cash flows, external borrowings, or both. We utilize a variety of tax planning and financing strategies in an effort to ensure that our worldwide cash is available in the locations in which it is needed.

Our existing cash, cash equivalents and investment balances may decline in fiscal 2013 in the event of a weakening of the global economy or changes in our planned cash outlay. Cash from operations could also be affected by various risks and uncertainties, including, but not limited to the risks detailed in Part I, Item 1A titled “Risk Factors.” However, based on our current business plan and revenue prospects, we believe that our existing balances, our anticipated cash flows from operations and our available credit facility will be sufficient to meet our working capital and operating resource expenditure requirements for at least the next 12 months. Our existing credit facility at March 15, 2012 is $400.0 million of which we have no amounts outstanding. This credit facility is available for working capital and general corporate purposes.

Our revenue, earnings, cash flows, receivables and payables are subject to fluctuations due to changes in foreign currency exchange rates. Our risk management strategy utilizes foreign currency contracts to manage our exposure to foreign currency volatility that exists as part of our ongoing business operations. We utilize cash flow hedge contracts to reduce the exchange rate impact on a portion of the net revenue or operating expense of certain anticipated transactions. In addition, we use balance sheet hedge contracts to reduce the exchange rate risk associated primarily with foreign currency denominated receivables and payables. As of January 31, 2012 and 2011, we had open cash flow and balance sheet hedge contracts with future settlements within one to twelve months. Contracts were primarily denominated in euros, Japanese yen, Swiss francs, British pounds,

44

Canadian dollars, and Australian dollars. We do not enter into any foreign exchange derivative instruments for trading or speculative purposes. The notional amount of our option and forward contracts was $494.7 million and $401.6 million at January 31, 2012 and 2011, respectively.

Contractual Obligations

The following table summarizes our significant financial contractual obligations at January 31, 2012 and the effect such obligations are expected to have on our liquidity and cash flows in future periods.

	Total		Fiscal 2013		Fiscal Years 2014-2015		Fiscal Years 2016-2017		Thereafter
					(in millions)
Operating lease obligations	$	237.6	$	49.4	$	74.4	$	53.9	$	59.9
Purchase obligations	53.5		45.9		7.6		—		—
Deferred compensation obligations	31.5		3.2		7.6		5.0		15.7
Pension obligations	18.1		2.0		4.6		3.6		7.9
Other obligations(1)	36.0		16.9		13.0		4.8		1.3
Total(2)	$	376.7	$	117.4	$	107.2	$	67.3	$	84.8

____________________ 

(1) Other obligations include future sabbatical obligations and asset retirement obligations.

(2) This table generally excludes amounts already recorded on the balance sheet as current liabilities, certain purchase obligations as discussed below, long term deferred revenue and amounts related to income tax liabilities for uncertain tax positions, since we cannot predict with reasonable reliability the timing of cash settlements to the respective taxing authorities (see Note 4, “Income Taxes” to the Notes to Consolidated Financial Statements).

Operating lease obligations consist primarily of obligations for facilities, net of sublease income, computer equipment and other equipment leases.

Purchase obligations are contractual obligations for purchase of goods or services and are defined as agreements that are enforceable and legally binding on Autodesk and that specify all significant terms, including: fixed or minimum quantities to be purchased; fixed, minimum or variable price provisions; and the approximate timing of the transaction. Purchase obligations relate primarily to hosting services agreements, IT infrastructure costs, and marketing costs.

Deferred compensation obligations relate to amounts held in a rabbi trust under our non-qualified deferred compensation plan. See Note 6, “Deferred Compensation,” in our Notes to Consolidated Financial Statements for further information regarding this plan.

Pension obligations relate to our obligations for pension plans outside of the U.S. See Note 14, “Retirement Benefit Plans,” in our Notes to Consolidated Financial Statements for further information regarding these obligations.

Purchase orders or contracts for the purchase of supplies and other goods and services are not included in the table above. We are not able to determine the aggregate amount of such purchase orders that represent contractual obligations, as purchase orders may represent authorizations to purchase rather than binding agreements. Our purchase orders are based on our current procurement or development needs and are fulfilled by our vendors within short time horizons. We do not have significant agreements for the purchase of supplies or other goods specifying minimum quantities or set prices that exceed our expected requirements for three months. In addition, we have certain software royalty commitments associated with the shipment and licensing of certain products.

The expected timing of payment of the obligations discussed above is estimated based on current information. Timing of payments and actual amounts paid may be different depending on the time of receipt of goods or services or changes to agreed-upon amounts for some obligations.

We provide indemnifications of varying scopes and certain guarantees, including limited product warranties. Historically, costs related to these warranties and indemnifications have not been significant, but because potential future costs are highly variable, we are unable to estimate the maximum potential impact of these guarantees on our future results of operations.

Issuer Purchases of Equity Securities

The purpose of the stock repurchase program is largely to help offset the dilution from the issuance of stock under our employee stock plans and for such other purposes as may be in the interests of Autodesk and its stockholders, and has the effect

45

of returning excess cash generated from our business to stockholders. The number of shares acquired and the timing of the purchases are based on several factors, including general market conditions, the volume of employee stock option exercises, stock issuance, the trading price of our common stock, cash on hand and available in the U.S., and company defined trading windows. There were 2.0 million repurchases of our common stock during the three months ended January 31, 2012; during the fiscal year ended January 31, 2012 we repurchased 9.7 million shares of our common stock. At January 31, 2012, 14.7 million shares remained available for repurchase under the existing repurchase authorization. This program does not have a fixed expiration date. See Note 9, “Stockholders' Equity,” in the Notes to Consolidated Financial Statements for further discussion.

Off-Balance Sheet Arrangements

Other than operating leases, we do not engage in off-balance sheet financing arrangements or have any variable-interest entities. As of January 31, 2012 we did not have any off-balance sheet arrangements as defined in Item 303(a)(4)(ii) of SEC Regulation S-K.

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Foreign currency exchange risk

Our revenue, earnings, cash flows, receivables and payables are subject to fluctuations due to changes in foreign currency exchange rates. Our risk management strategy utilizes foreign currency contracts to manage our exposure to foreign currency volatility that exists as part of our ongoing business operations. We utilize cash flow hedge contracts to reduce the exchange rate impact on a portion of the net revenue or operating expense of certain anticipated transactions. In addition, we use balance sheet hedge contracts to reduce the exchange rate risk associated primarily with foreign currency denominated receivables and payables. As of January 31, 2012 and 2011, we had open cash flow and balance sheet hedge contracts with future settlements within one to twelve months. Contracts were primarily denominated in euros, Japanese yen, Swiss francs, British pounds, Canadian dollars, and Australian dollars. We do not enter into any foreign exchange derivative instruments for trading or speculative purposes. The notional amount of our option and forward contracts was $494.7 million and $401.6 million at January 31, 2012 and 2011, respectively.

We utilize foreign currency contracts to reduce the exchange rate impact on the net revenue and operating expenses of certain anticipated transactions. A sensitivity analysis performed on our hedging portfolio as of January 31, 2012 indicated that a hypothetical 10% appreciation of the U.S. dollar from its value at January 31, 2012 and 2011 would increase the fair value of our foreign currency contracts by $45.3 million and $31.6 million, respectively. A hypothetical 10% depreciation of the dollar from its value at January 31, 2012 and 2011 would decrease the fair value of our foreign currency contracts by $24.3 million and $26.6 million, respectively.

Interest rate risk

Interest rate movements affect both the interest income we earn on our short term investments and, to a lesser extent, the market value of certain longer term securities. At January 31, 2012, we had $1,300.8 million of cash equivalents and marketable securities. With an average investment balance for the quarter of approximately $1,236.5 million, if interest rates were to change by 10%, this would result in a $0.2 million change in annual interest income. Further, at January 31, 2012, we had approximately $211.5 million invested in a longer term portfolio (with remaining maturities that may be less than one year) which, with 50 and 100 basis point moves, would result in market value changes (gains or losses) of $2.0 million and $4.0 million respectively, over a twelve month period. At January 31, 2011, we had $1,149.9 million of cash equivalents and marketable securities. With an average investment balance for the quarter of approximately $810.0 million, if interest rates were to change by 10%, this would result in a $0.2 million change in annual interest income. Further, at January 31, 2011, we had approximately $285.0 million invested in a longer term portfolio (with remaining maturities that may be less than one year) which, with 50 and 100 basis point moves, would result in market value changes (gains or losses) of $0.9 million and $1.8 million respectively, over a twelve month period.

46

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

AUTODESK, INC.

CONSOLIDATED STATEMENTS OF OPERATIONS

	Fiscal year ended January 31,
	2012			2011			2010
	(in millions, except per share data)
Net revenue:
License and other	$	1,357.6		$	1,172.1		$	980.7
Maintenance	858.0			779.7			733.0
Total net revenue	2,215.6			1,951.8			1,713.7
Cost of revenue:
Cost of license and other revenue	187.1			162.2			172.0
Cost of maintenance revenue	42.0			34.4			19.8
Total cost of revenue	229.1			196.6			191.8
Gross profit	1,986.5			1,755.2			1,521.9
Operating expenses:
Marketing and sales	842.6			776.0			731.9
Research and development	566.5			496.2			457.5
General and administrative	223.1			200.8			197.7
Impairment of goodwill	—			—			21.0
Restructuring (benefits) charges	(1.3		)	10.8			48.2
Total operating expenses	1,630.9			1,483.8			1,456.3
Income from operations	355.6			271.4			65.6
Interest and other income, net	7.3			0.6			19.1
Income before income taxes	362.9			272.0			84.7
Provision for income taxes	(77.6		)	(60.0		)	(26.7		)
Net income	$	285.3		$	212.0		$	58.0
Basic net income per share	$	1.25		$	0.93		$	0.25
Diluted net income per share	$	1.22		$	0.90		$	0.25
Weighted average shares used in computing basic net income per share	227.7			227.6			228.7
Weighted average shares used in computing diluted net income per share	233.3			234.2			232.1

See accompanying Notes to Consolidated Financial Statements.

47

AUTODESK, INC.

CONSOLIDATED BALANCE SHEETS

	January 31, 2012		January 31, 2011
	(in millions, except per share data)
ASSETS
Current assets:
Cash and cash equivalents	$	1,156.9	$	1,075.1
Marketable securities	254.4		199.2
Accounts receivable, net	395.1		318.4
Deferred income taxes	30.1		56.8
Prepaid expenses and other current assets	59.4		64.8
Total current assets	1,895.9		1,714.3
Marketable securities	192.8		192.6
Computer equipment, software, furniture and leasehold improvements, net	104.5		84.5
Purchased technologies, net	84.6		57.2
Goodwill	682.4		554.1
Deferred income taxes, net	135.8		90.7
Other assets	131.8		94.2
	$	3,227.8	$	2,787.6
LIABILITIES AND STOCKHOLDERS’ EQUITY
Current liabilities:
Accounts payable	$	89.3	$	76.8
Accrued compensation	183.9		193.1
Accrued income taxes	14.4		28.6
Deferred revenue	582.3		496.2
Other accrued liabilities	84.2		75.1
Total current liabilities	954.1		869.8
Deferred revenue	136.9		91.7
Long term income taxes payable	174.8		139.1
Other liabilities	79.1		77.7
Commitments and contingencies
Stockholders’ equity:
Preferred stock, $0.01 par value; shares authorized 2.0; none issued or outstanding at January 31, 2012 and 2011	—		—
Common stock and additional paid-in capital, $0.01 par value; shares authorized 750.0; 225.9 outstanding at January 31, 2012 and 227.0 outstanding at January 31, 2011	1,365.4		1,267.2
Accumulated other comprehensive income (loss)	5.9		(0.6		)
Retained earnings	511.6		342.7
Total stockholders’ equity	1,882.9		1,609.3
	$	3,227.8	$	2,787.6

See accompanying Notes to Consolidated Financial Statements.

48

AUTODESK, INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

	Fiscal year ended January 31,
	2012			2011			2010
	(in millions)
Operating Activities
Net income	$	285.3		$	212.0		$	58.0
Adjustments to reconcile net income to net cash provided by operating activities:
Depreciation and amortization	115.5			105.4			111.5
Stock-based compensation expense	108.8			80.7			93.6
Excess tax benefits from stock-based compensation	(31.5		)	—			—
Impairment of goodwill	—			—			21.0
Restructuring (benefits) charges, net	(1.3		)	10.8			48.2
Changes in operating assets and liabilities, net of business combinations:
Accounts receivable	(71.8		)	(40.7		)	37.3
Deferred income taxes	(33.8		)	(2.1		)	(13.5		)
Prepaid expenses and other current assets	17.7			(12.9		)	4.4
Accounts payable and accrued liabilities	2.6			83.7			(80.3		)
Deferred revenue	129.6			71.5			(34.0		)
Accrued income taxes	52.4			32.4			0.6
Net cash provided by operating activities	573.5			540.8			246.8
Investing Activities
Purchases of marketable securities	(614.2		)	(507.2		)	(568.9		)
Sales of marketable securities	149.5			135.3			26.4
Maturities of marketable securities	409.6			275.4			328.7
Acquisitions, net of cash acquired	(221.7		)	(13.5		)	(26.1		)
Capital Expenditures	(63.0		)	(28.3		)	(31.7		)
Other investing activities	(30.5		)	(4.0		)	(11.4		)
Net cash used in investing activities	(370.3		)	(142.3		)	(283.0		)
Financing Activities
Proceeds from issuance of common stock, net of issuance costs	176.1			120.9			70.0
Repurchases of common stock	(327.4		)	(280.3		)	(63.2		)
Draws on line of credit	—			—			2.2
Repayments of line of credit	—			—			(54.3		)
Excess tax benefits from stock-based compensation	31.5			—			—
Net cash used in financing activities	(119.8		)	(159.4		)	(45.3		)
Effect of exchange rate changes on cash and cash equivalents	(1.6		)	(2.7		)	2.6
Net increase (decrease) in cash and cash equivalents	81.8			236.4			(78.9		)
Cash and cash equivalents at beginning of fiscal year	1,075.1			838.7			917.6
Cash and cash equivalents at end of fiscal year	$	1,156.9		$	1,075.1		$	838.7
Supplemental cash flow information:
Net cash paid during the year for income taxes	$	63.0		$	32.5		$	42.1

See accompanying Notes to Consolidated Financial Statements.

49

AUTODESK, INC.

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY

(In millions)

	Common stock and additional paid-in capital					Comprehensive Income			Accumulated other comprehensive income (loss)			Retained earnings			Total stockholders' equity
	Shares		Amount
Balances, January 31, 2009	226.4		$	1,080.4					$	(11.2	)	$	241.5		$	1,310.7
Common shares issued under stock plans	5.2		70.4						—			—			70.4
Stock-based compensation expense	—		93.6						—			—			93.6
Tax benefits from employee stock plans	—		(3.7		)				—			—			(3.7		)
Comprehensive income:
Net income	—		—			$	58.0		—			58.0			58.0
Other comprehensive income, net of tax:
Net gain on derivative instruments, net of tax	—		—			2.5			—			—			—
Change in net unrealized gain on marketable securities, net of tax	—		—			1.5			—			—			—
Change in unfunded portion of pension plans						(5.9		)
Net change in cumulative foreign currency translation gain	—		—			9.6			—			—			—
Other comprehensive income	—		—			7.7			7.7			—			7.7
Comprehensive income	—		—			$	65.7		—			—			—
Repurchase and retirement of common shares	(2.7	)	(36.4		)				—			(26.8		)	(63.2		)
Balances, January 31, 2010	228.9		1,204.3						(3.5		)	272.7			1,473.5
Common shares issued under stock plans	7.1		120.9						—			—			120.9
Stock-based compensation expense	—		80.7						—			—			80.7
Tax benefits from employee stock plans	—		(0.4		)				—			—			(0.4		)
Comprehensive income:
Net income	—		—			$	212.0		—			212.0			212.0
Other comprehensive income, net of tax:
Net loss on derivative instruments, net of tax	—		—			(3.1		)	—			—			—
Change in net unrealized gain on marketable securities, net of tax	—		—			0.9			—			—			—
Change in unfunded portion of pension plans	—		—			(3.9		)	—			—			—
Net change in cumulative foreign currency translation gain	—		—			9.0			—			—			—
Other comprehensive income	—		—			2.9			2.9			—			2.9
Comprehensive income	—		—			$	214.9		—			—			—
Repurchase and retirement of common shares	(9.0	)	(138.3		)				—			(142.0		)	(280.3		)
Balances, January 31, 2011	227.0		1,267.2						(0.6		)	342.7			1,609.3
Common shares issued under stock plans	8.6		176.1			—			—			—			176.1
Stock-based compensation expense	—		108.8			—			—			—			108.8
Tax benefits from employee stock plans	—		24.3			—			—			—			24.3
Comprehensive income:
Net income	—		—			$	285.3		—			285.3			285.3
Other comprehensive income, net of tax:
Net gain on derivative instruments, net of tax	—		—			10.0			—			—			—
Change in net unrealized gain on marketable securities, net of tax	—		—			0.2			—			—			—
Change in unfunded portion of pension plans	—		—			1.2			—			—			—
Net change in cumulative foreign currency translation gain	—		—			(4.9		)	—			—			—
Other comprehensive income	—		—			6.5			6.5			—			6.5
Comprehensive income	—		—			$	291.8		—			—			—
Repurchase and retirement of common shares	(9.7	)	(211.0		)				—			(116.4		)	(327.4		)
Balances, January 31, 2012	225.9		$	1,365.4					$	5.9		$	511.6		$	1,882.9

See accompanying Notes to Consolidated Financial Statements.

50

AUTODESK, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

January 31, 2012

(Tables in millions of dollars, except per share data, unless otherwise indicated)

1.    Business and Summary of Significant Accounting Policies

Business

Autodesk, Inc. (“Autodesk” or the “Company”) is a world leading design software and services company, offering customers productive business solutions through powerful technology products and services. The Company serves customers in the architecture, engineering and construction; manufacturing; and digital media and entertainment industries. The Company’s sophisticated software products enable its customers to experience their ideas before they are real by allowing them to imagine, design, and create their ideas and to visualize, simulate and analyze real-world performance early in the design process by creating digital prototypes. These capabilities allow Autodesk’s customers to optimize and improve their designs, help save time and money, improve quality and foster innovation. Autodesk software products are sold globally, both directly to customers and through a network of resellers and distributors.

Principles of Consolidation

The accompanying consolidated financial statements include the accounts of Autodesk and its wholly-owned and majority-owned subsidiaries. All significant intercompany accounts and transactions have been eliminated.

Use of Estimates

The preparation of financial statements in conformity with generally accepted accounting principles requires management to make estimates and assumptions that affect the amounts reported in Autodesk’s consolidated financial statements and notes thereto. These estimates are based on information available as of the date of the consolidated financial statements. On a regular basis, management evaluates these estimates and assumptions. Actual results may differ materially from these estimates.

Examples of significant estimates and assumptions made by management involve the determination of the fair value of goodwill, financial instruments, long-lived assets and other intangible assets, the realizability of deferred tax assets and the fair value of stock awards (see “Stock-Based Compensation Expense” within this Note 1 and Note 3 “Employee and Director Stock Plans,” for further discussion). The Company also make assumptions, judgments and estimates in determining the accruals for uncertain tax positions, variable compensation, partner incentive programs, product returns reserves, allowances for doubtful accounts, asset retirement obligations and legal contingencies.

Foreign Currency Translation

The assets and liabilities of Autodesk’s foreign subsidiaries are translated from their respective functional currencies into U.S. dollars at the rates in effect at the balance sheet date, and revenue and expense amounts are translated at weighted average rates during the period. Foreign currency translation adjustments are recorded as other comprehensive income (loss).

Gains and losses realized from foreign currency transactions, those transactions denominated in currencies other than the foreign subsidiary’s functional currency, are included in interest and other income, net.

Derivative Financial Instruments

Under its risk management strategy, Autodesk uses derivative instruments to manage its short-term exposures to fluctuations in foreign currency exchange rates which exist as part of ongoing business operations. Autodesk’s general practice is to hedge a majority of transaction exposures denominated in euros, Japanese yen, Swiss francs, British pounds, Canadian dollars, and Australian dollars. These instruments have maturities between one to 12 months in the future. Autodesk does not enter into any derivative instruments for trading or speculative purposes.

The bank counterparties in all contracts expose Autodesk to credit-related losses in the event of their nonperformance. However, to mitigate that risk, Autodesk only contracts with counterparties who meet the Company’s minimum requirements under its counterparty risk assessment process. Autodesk monitors ratings, credit spreads and potential downgrades on at least a quarterly basis. Based on Autodesk’s on-going assessment of counterparty risk, the Company will adjust its exposure to various counterparties. Autodesk generally enters into master netting arrangements, which reduce credit risk by permitting net settlement of transactions with the same counterparty. However, Autodesk does not have any master netting arrangements in place with collateral features.

51

Autodesk accounts for its derivative instruments as either assets or liabilities on the balance sheet and carries them at fair value. Gains and losses resulting from changes in fair value are accounted for depending on the use of the derivative and whether it is designated and qualifies for hedge accounting. Derivatives that do not qualify for hedge accounting are adjusted to fair value through earnings. See Note 2, "Financial Instruments" for information regarding Autodesk's hedging activities.

Cash and Cash Equivalents

Autodesk considers all highly liquid investments with insignificant interest rate risk and remaining maturities of three months or less at the date of purchase to be cash equivalents. Cash equivalents are recorded at cost, which approximates fair value.

Marketable Securities

Marketable securities are stated at fair value. Marketable securities maturing within one year that are not restricted are classified as current assets.

Autodesk determines the appropriate classification of its marketable securities at the time of purchase and re-evaluates such classification as of each balance sheet date. Autodesk carries all “available-for-sale securities” at fair value, with unrealized gains and losses, net of tax, reported in stockholders’ equity until disposition or maturity. Autodesk carries all “trading securities” at fair value, with unrealized gains and losses, recorded in “Interest and other income, net” in the Company’s Consolidated Statements of Operations.

All of Autodesk’s marketable securities are subject to a periodic impairment review. The Company recognizes an impairment charge when a decline in the fair value of its investments below the cost basis is judged to be other-than-temporary. Autodesk considers various factors in determining whether to recognize an impairment charge, including the length of time and extent to which the fair value has been less than Autodesk’s cost basis, the financial condition and near-term prospects of the investee, and Autodesk’s intent and ability to hold the investment for a period of time sufficient to allow for any anticipated recovery in the market value. Autodesk did not record any other-than temporary impairment charges during fiscal 2012 and fiscal 2011. For additional information, see “Concentration of Credit Risk” within this Note 1 and Note 2, “Financial Instruments.”

Accounts Receivable, Net

Accounts receivable, net, consisted of the following as of January 31:

	2012			2011
Trade accounts receivable	$	433.9		$	363.0
Less: Allowance for doubtful accounts	(5.5		)	(4.2		)
Product returns reserve	(5.8		)	(10.6		)
Partner programs and other obligations	(27.5		)	(29.8		)
Accounts receivable, net	$	395.1		$	318.4

Allowances for uncollectible trade receivables are based upon historical loss patterns, the number of days that billings are past due and an evaluation of the potential risk of loss associated with problem accounts.

The product returns reserves are based on historical experience of actual product returns, estimated channel inventory levels, the timing of new product introductions, channel sell-in for applicable markets and other factors.

Partner program and other obligations are primarily related to partner incentives that use quarterly attainment monetary rewards to motivate distributors and resellers to achieve mutually agreed upon business goals in a specified time period.

Concentration of Credit Risk

Autodesk places its cash, cash equivalents and marketable securities in highly liquid instruments with, and in the custody of, financial institutions with high credit ratings and limits the amounts invested with any one institution, type of security and issuer.

52

Geographical concentrations of consolidated cash, cash equivalents and marketable securities held by Autodesk as of January 31:

	2012		2011
United States	11	%	14	%
Other Americas	1	%	1	%
Europe, Middle East and Africa (“EMEA”)	51	%	49	%
Asia Pacific (“APAC”)	37	%	36	%

Autodesk's primary commercial banking relationship is with Citibank and its global affiliates (“Citibank”). The Company's cash and cash equivalents are held by diversified financial institutions globally. Citicorp USA, Inc., an affiliate of Citibank, is one of the lead lenders and agent in the syndicate of Autodesk's $400.0 million line of credit facility.

Autodesk’s accounts receivable are derived from sales to a large number of resellers, distributors and direct customers in the Americas; EMEA; and APAC geographies. Autodesk performs ongoing evaluations of its customers’ financial condition and limits the amount of credit extended when deemed necessary, but generally does not require collateral from such parties. Total sales to the Company's largest distributor Tech Data Corporation, and its global affiliates (“Tech Data”), accounted for 17%, 16% and 14% of our net revenue for fiscal years ended 2012, 2011 and 2010, respectively. The majority of the net revenue from sales to Tech Data relates to Autodesk's Platform Solutions and Emerging Business segment and is for sales made outside of the United States. In addition, Tech Data accounted for 21% and 16% of trade accounts receivable at January 31, 2012 and 2011, respectively. In October 2011, Tech Data purchased certain assets of Mensch and Maschine Software (“MuM”), which has been a distributor of our products in Europe. The acquisition concentrates additional sales through Tech Data, which on a consolidated basis would have accounted for 21%, 22% and 21% of our net revenue for fiscal years 2012, 2011 and 2010, if the acquisition had taken place at the beginning of fiscal 2010.

Computer Equipment, Software, Furniture and Leasehold Improvements, Net

Computer equipment, software and furniture are depreciated using the straight-line method over the estimated useful lives of the assets, which range from three to five years. Leasehold improvements are amortized on a straight-line basis over the shorter of their estimated useful lives or the lease term. Depreciation expense was $43.7 million in fiscal 2012, $47.6 million in fiscal 2011 and $50.4 million in fiscal 2010.

Computer equipment, software, furniture, leasehold improvements and the related accumulated depreciation at January 31 were as follows:

	2012			2011
Computer software, at cost	$	133.5		$	129.4
Computer hardware, at cost	153.3			123.7
Leasehold improvements, land and buildings, at cost	139.5			121.3
Furniture and equipment, at cost	47.7			43.6
	474.0			418.0
Less: Accumulated depreciation	(369.5		)	(333.5		)
Computer software, hardware, leasehold improvements, furniture and equipment, net	$	104.5		$	84.5

Costs incurred for computer software developed or obtained for internal use are capitalized for application development activities, if material, and immediately expensed for preliminary project activities and post-implementation activities. These capitalized costs are amortized over the software’s expected useful life, which is generally three years.

Software Development Costs

Software development costs incurred prior to the establishment of technological feasibility are included in research and development expenses. Autodesk defines establishment of technological feasibility as the completion of a working model. Software development costs incurred subsequent to the establishment of technological feasibility through the period of general market availability of the products are capitalized and generally amortized over a one year period, if material. Autodesk had no capitalized software development costs at January 31, 2012 and January 31, 2011.

53

Other Intangible Assets, Net

Other intangible assets include purchased technologies, customer relationships, trade names and the related accumulated amortization. These assets are shown as “Purchased technologies, net” and as part of “Other assets” in the Consolidated Balance Sheet. The majority of Autodesk’s other intangible assets are amortized to expense over the estimated economic life of the product, which ranges from two to seven years. Amortization expense for purchased technologies, customer relationships, trade names, patents, and user lists was $71.8 million in fiscal 2012, $57.8 million in fiscal 2011 and $61.2 million in fiscal 2010.

Other intangible assets and related accumulated amortization at January 31 were as follows:

	2012			2011
Purchased technologies, at cost(1)	$	378.7		$	313.1
Customer relationships, trade names, patents, and user lists, at cost(2)	215.3			179.1
	594.0			492.2
Less: Accumulated amortization	(445.2		)	(373.4		)
Other intangible assets, net	$	148.8		$	118.8

____________________ 

(1) Purchased technologies include $1.2 million and zero of in-process research and development technology as of January 31, 2012 and January 31, 2011, respectively. In-process research and development is an indefinite lived asset that is held and tested at least annually for impairment until such time that it becomes fully developed technology. Once development is completed, the technology is amortized to expense over an applicable useful life.

(2) Included as a net balance in “Other assets” in the Consolidated Balance Sheet. Customer relationships and trade names include the effects of foreign currency translation.

The weighted average amortization period for purchased technologies, customer relationships and trade names during fiscal 2012 was 5.4 years. Expected future amortization expense for purchased technologies, customer relationships and trade names for each of the fiscal years ended thereafter is as follows:

	Year ending January 31,
2013	$	65.7
2014	47.1
2015	25.5
2016	7.9
2017	1.0
Thereafter	1.6
Total	$	148.8

Goodwill

Goodwill consists of the excess of cost over the fair value of net assets acquired in business combinations. Autodesk assigns goodwill to the reportable segment associated with each business combination, and tests goodwill for impairment annually in its fourth fiscal quarter or more often if circumstances indicate a potential impairment. When assessing goodwill for impairment, Autodesk uses discounted cash flow models that include assumptions regarding reportable segments’ projected cash flows (“Income Approach”) and corroborates it with the estimated consideration that the Company would receive if there were to be a sale of the reporting segment (“Market Approach”). Variances in these assumptions could have a significant impact on Autodesk’s conclusion as to whether goodwill is impaired or the amount of any impairment charge. Impairment charges, if any, result from instances where the fair values of net assets associated with goodwill are less than their carrying values. The process of evaluating the potential impairment of goodwill is subjective and requires significant judgment at many points during the analysis. The value of Autodesk’s goodwill could also be impacted by future adverse changes such as: (i) declines in Autodesk’s actual financial results, (ii) a sustained decline in Autodesk’s market capitalization, (iii) significant slowdown in the worldwide economy or the industries Autodesk serves, or (iv) changes in Autodesk’s business strategy or internal financial results forecasts. There was no impairment of goodwill during the year ended January 31, 2012. A hypothetical 10%decrease in the fair value of Autodesk’s Platform Solutions and Emerging Business; Manufacturing; Architecture, Engineering and Construction; or Media and Entertainment reporting units would not have an impact on the carrying value, nor result in an impairment, of goodwill shown on Autodesk’s balance sheet as of January 31, 2012 for the respective reporting units.

54

During the fiscal year ended 2010, Autodesk recorded an impairment charge of $21.0 million, representing the entire goodwill balance of the Media and Entertainment (“M&E”) segment as of April 30, 2009. Should revenue and cash flow projections decline significantly in the future, additional impairment charges may be recorded to goodwill.

The change in the carrying amount of goodwill during the year ended January 31, 2012 is as follows:

	Platform Solutions and Emerging Business			Architecture, Engineering and Construction			Manufacturing		Media and Entertainment			Total
Balance as of January 31, 2011
Goodwill	$	45.3		$	224.2		$	279.1	$	154.7		$	703.3
Accumulated impairment losses	—			—			—		(149.2		)	(149.2		)
	45.3			224.2			279.1		5.5			554.1
Scaleform acquisition	—			—			—		22.6			22.6
Blue Ridge acquisition	—			—			22.3		—			22.3
Instructables acquisition	24.4			—			—		—			24.4
Micro Application Packages Limited acquisition	—			12.7			—		—			12.7
T-Splines acquisition	—			—			19.8		—			19.8
Goodwill acquired from other acquisitions	7.6			12.0			2.0		6.7			28.3
Effect of foreign currency translation, purchase accounting adjustments and other	(0.7		)	(1.2		)	0.1		—			(1.8		)
Balance as of January 31, 2012
Goodwill	76.6			247.7			323.3		184.0			831.6
Accumulated impairment losses	—			—			—		(149.2		)	(149.2		)
	$	76.6		$	247.7		$	323.3	$	34.8		$	682.4

The change in the carrying amount of goodwill during the year ended January 31, 2011 is as follows:

	Platform Solutions and Emerging Business		Architecture, Engineering and Construction			Manufacturing		Media and Entertainment			Total
Balance as of January 31, 2010
Goodwill	$	40.2	$	224.8		$	277.9	$	149.2		$	692.1
Accumulated impairment losses	—		—			—		(149.2		)	(149.2		)
	40.2		224.8			277.9		—			542.9
Goodwill acquired during the year	4.6		—			—		5.5			10.1
Effect of foreign currency translation, purchase accounting adjustments and other	0.5		(0.6		)	1.2		—			1.1
Balance as of January 31, 2011
Goodwill	45.3		224.2			279.1		154.7			703.3
Accumulated impairment losses	—		—			—		(149.2		)	(149.2		)
	$	45.3	$	224.2		$	279.1	$	5.5		$	554.1

Purchase accounting adjustments reflect revisions made to the Company’s preliminary purchase price allocation during fiscal 2012 and 2011.

Impairment of Long-Lived Assets

At least annually or more frequently as circumstances dictate, Autodesk assesses the recoverability of its long-lived

55

intangible assets by comparing their carrying amounts to future undiscounted cash flows the assets are expected to generate. If certain identifiable intangibles are considered to be impaired, the impairment to be recognized equals the amount by which the carrying value of the assets exceeds its fair value. There was no impairment of long-lived assets during the years ended January 31, 2012 and 2011.

In addition to the recoverability assessments, Autodesk routinely reviews the remaining estimated useful lives of its long-lived assets. Any reduction in the useful life assumption will result in increased depreciation and amortization expense in the quarter when such determinations are made, as well as in subsequent quarters.

Deferred Tax Assets

Deferred tax assets arise primarily from tax credits, net operating losses, and timing differences for reserves, accrued liabilities, stock options, purchased technologies and capitalized intangibles, partially offset by the establishment of U.S. deferred tax liabilities on unremitted earnings from certain foreign subsidiaries, deferred tax liabilities associated with tax method change on advance payments, and a valuation allowance against California and Canadian deferred tax assets. They are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to reverse. Valuation allowances are established when necessary to reduce gross deferred tax assets to the amount “more likely than not” expected to be realized.

Revenue Recognition

Autodesk recognizes revenue when persuasive evidence of an arrangement exists, delivery has occurred or services have been rendered, the price is fixed or determinable, and collection is probable. For multiple element arrangements, Autodesk allocates the sales price among each of the deliverables using the residual method, under which revenue is allocated to undelivered elements based on their vendor-specific objective evidence (“VSOE”) of fair value. VSOE is the price charged when an element is sold separately or a price set by management with the relevant authority. If Autodesk does not have VSOE of an undelivered software license, revenue recognition is deferred on the entire sales arrangement until all elements for which Autodesk does not have VSOE are delivered. If Autodesk does not have VSOE for undelivered maintenance or services, the revenue for the arrangement is recognized over the longest contractual service period in the arrangement. Revenue recognition for significant lines of business is discussed further below.

Autodesk’s assessment of likelihood of collection is also a critical element in determining the timing of revenue recognition. If collection is not probable, the revenue will be deferred until the earlier of when collection is deemed probable or cash is received.

License and other revenue are comprised of two components: (1) all forms of product license revenue and (2) other revenue:

(1) All Forms of Product License Revenue

Product license revenue includes: software license revenue from the sale of new seat licenses, upgrades, product revenue for Creative Finishing and revenue from on-demand collaboration software and services. Autodesk’s existing customers who are using a currently supported version of a product can upgrade to the latest release of the product by paying a separate fee at current available prices. An existing customer also has the option to upgrade to a different product, which generally has a higher price, for a premium fee.

Autodesk’s product license revenue from distributors and resellers is generally recognized at the time title to Autodesk’s product passes to the distributor or reseller, provided all other criteria for revenue recognition are met.

Autodesk establishes reserves for product returns based on historical experience of actual product returns, estimated channel inventory levels, the timing of new product introductions, channel sell-in for applicable markets and other factors. These reserves are recorded as a direct reduction of revenue and accounts receivable at the time the related revenue is recognized.

(2) Other Revenue

Other revenue includes revenue from consulting, training, Autodesk Developers Network and Creative Finishing customer support, and is recognized over time, as the services are performed.

Maintenance revenue consists of revenue from the Company’s maintenance program. Under this program, customers are eligible to receive unspecified upgrades when-and-if-available, downloadable training courses and on-line support. Autodesk recognizes maintenance revenue from its maintenance program ratably over the maintenance service contract periods.

56

Taxes Collected from Customers

Autodesk nets taxes collected from customers against those remitted to government authorities in the consolidated financial statements. Accordingly, taxes collected from customers are not reported as revenue.

Shipping and Handling Costs

Shipping and handling costs are included in cost of revenue for all periods presented.

Stock-based Compensation Expense

On the date of grant, Autodesk measures the fair value of all stock-based payments (including grants of stock options, employee stock purchases related to the employee stock purchase plan (“ESP Plan”), and restricted stock) to employees and directors and records the related expense in Autodesk’s Consolidated Statements of Operations. Share-based compensation cost for stock options and employee stock purchases related to the ESP Plan ("stock-based awards") are estimated at the grant date based on the fair-value as calculated using the Black-Scholes-Merton (“BSM”) option-pricing model. Share-based compensation cost for restricted stock is measured based on the closing fair market value of the Company's common stock on the date of grant. The estimated fair value of stock-based awards and restricted stock is amortized to expense on a straight-line basis over the awards’ vesting period. The following table summarizes stock-based compensation expense for fiscal 2012, 2011 and 2010, respectively, as follows:

	Fiscal Year Ended January 31,
	2012			2011			2010
Cost of license and other revenue	$	3.9		$	2.9		$	3.1
Marketing and sales	48.3			35.5			41.1
Research and development	38.1			27.4			30.0
General and administrative	18.5			14.9			19.4
Stock-based compensation expense related to stock awards and ESP Plan purchases	108.8			80.7			93.6
Tax benefit	(27.1		)	(22.0		)	(22.2		)
Stock-based compensation expense related to stock awards and ESP Plan purchases	$	81.7		$	58.7		$	71.4

In fiscal 2010, Autodesk identified errors in the calculation of stock-based compensation expense. The Company had been incorrectly calculating stock-based compensation expense by applying a weighted average forfeiture rate to the vested portion of stock option awards until the grant’s final vest date rather than calculating stock based compensation expense based upon the actual vested portion of the grant date fair value, resulting in an understatement of stock-based compensation expense in certain periods prior to the grant’s vest date. The cumulative error from the understatement of stock-based compensation expense related to the periods prior to fiscal 2010 totaled $6.8 million, net of tax effects. Accordingly, additional expenses of $0.4 million for Cost of license and other revenue, $4.4 million for Marketing and sales, $2.9 million for Research and development, $2.1 million for General and Administrative and $3.0 million for additional tax benefit are included in the stock-based compensation expenses in the table above for the fiscal year ended January 31, 2010.

Autodesk uses the BSM option-pricing model to estimate the fair value of stock-based awards based on the following assumptions:

	Fiscal Year Ended		Fiscal Year Ended		Fiscal Year Ended
	January 31, 2012		January 31, 2011		January 31, 2010
	Stock Option Plans	ESP Plan	Stock Option Plans	ESP Plan	Stock Option Plans	ESP Plan
Range of expected volatilities	40 - 49%	34 - 44%	40 - 45%	33 - 47%	43 - 55%	43 - 73%
Range of expected lives (in years)	2.6 - 4.8	0.5 - 2.0	2.6 - 4.4	0.5 - 2.0	2.7 - 4.0	0.5 - 2.0
Expected dividends	—%	—%	—%	—%	—%	—%
Range of risk-free interest rates	0.5 - 1.9%	0.1 - 0.8%	0.8 - 1.9%	0.2 - 1.1%	1.0 - 2.4%	0.2 - 1.0%
Expected forfeitures	7.8 - 10.5%	7.8 - 10.5%	10.5 - 13.5%	10.5 - 13.5%	13.5%	13.5%

57

Autodesk estimates expected volatility for stock-based awards based on the average of the following two measures. The first is a measure of historical volatility in the trading market for the Company’s common stock, and the second is the implied volatility of traded forward call options to purchase shares of the Company’s common stock.

Autodesk estimates the expected life of stock-based awards using both exercise behavior and post-vesting termination behavior as well as consideration of outstanding options.

Autodesk did not pay cash dividends in fiscal 2012, 2011 or 2010 and does not anticipate paying any cash dividends in the foreseeable future. Consequently, an expected dividend yield of zero is used in the BSM option pricing model.

The risk-free interest rate used in the BSM option pricing model for stock-based awards is the historical yield on U.S. Treasury securities with equivalent remaining lives.

Autodesk only recognizes expense for the stock-based awards that are ultimately expected to vest. Therefore, Autodesk has developed an estimate of the number of awards expected to cancel prior to vesting (“forfeiture rate”). The forfeiture rate is estimated based on historical pre-vest cancellation experience, and is applied to all stock-based awards. The Company estimates forfeitures at the time of grant and revises those estimates in subsequent periods if actual forfeitures differ from those estimates.

Advertising Expenses

Advertising costs are expensed as incurred. Total advertising expenses incurred were $21.3 million in fiscal 2012, $18.8 million in fiscal 2011 and $18.4 million in fiscal 2010.

Net Income Per Share

Basic net income per share is computed based on the weighted average number of shares of common stock outstanding for the period, including restricted stock awards and excluding stock options and restricted stock units. Diluted net income per share is computed based upon the weighted average shares of common shares outstanding for the period and potentially dilutive common shares, including the effect of stock options and restricted stock units under the treasury stock method.

Accounting Standards in Fiscal 2012

With the exception of those discussed below, there have been no recent changes in accounting pronouncements issued by the Financial Accounting Standards Board (“FASB”) or adopted by the Company during the fiscal year ended January 31, 2012, that are of significance, or potential significance, to the Company.

Accounting Standards Adopted

In December 2010, the FASB issued Accounting Standard Update (“ASU”) 2010-29 regarding Accounting Standards Codification (“ASC”) Topic 805 “Business Combinations.” This ASU updates accounting guidance to clarify that pro forma disclosures should be presented as if a business combination occurred at the beginning of the prior annual period for purposes of preparing both the current reporting period and the prior reporting period pro forma financial information. These disclosures should be accompanied by a narrative description about the nature and amount of material, nonrecurring pro forma adjustments. The new accounting guidance was effective for business combinations consummated in periods beginning after December 15, 2010, and should be applied prospectively as of the date of adoption. Autodesk adopted the new disclosures under ASU 2010-29 effective February 1, 2011. The adoption of this ASU did not have an impact on Autodesk's consolidated statements of financial position, results of operations or cash flows. The impact of ASU 2010-29 on Autodesk's future disclosures will be dependent on the size of the business combinations that it consummates in future periods.

In December 2010, the FASB issued ASU 2010-28 regarding ASC Topic 350 “Intangibles - Goodwill and Other.” This ASU updates accounting guidance related to the calculation of the carrying amount of a reporting unit when performing the first step of a goodwill impairment test. More specifically, this update requires an entity to use an equity premise when performing the first step of a goodwill impairment test and if a reporting unit has a zero or negative carrying amount, the entity must assess and consider qualitative factors and whether it is more likely than not that a goodwill impairment exists. The new accounting guidance was effective for public entities, for impairment tests performed during entities' fiscal years (and interim periods within those years) that begin after December 15, 2010. Autodesk adopted the changes under ASU 2010-28 effective February 1, 2011. The adoption of this ASU did not have a material impact on Autodesk's consolidated statements of financial position, results of operations or cash flows.

In January 2010, the FASB issued ASU 2010-06 regarding ASC Topic 820 “Fair Value Measurements and Disclosures.” This ASU requires additional disclosure regarding significant transfers in and out of Levels 1 and 2 fair value measurements

58

and the reasons for the transfers. In addition, this ASU requires the Company to separately present information about purchases, sales, issuances, and settlements (on a gross basis rather than as one net number) in the reconciliation for fair value measurements using significant unobservable inputs (Level 3). ASU 2010-06 clarifies existing disclosures regarding fair value measurement for each class of assets and liabilities and the valuation techniques and inputs used to measure fair value for recurring and nonrecurring fair value measurements that fall in either Level 2 or Level 3. This update also includes conforming amendments to the guidance on employers' disclosures about postretirement benefit plan asset (Subtopic 715-20). The changes under ASU 2010-06 were effective for Autodesk's fiscal year beginning February 1, 2010, except for the disclosures about purchases, sales, issuances and settlements in the roll forward of activity in Level 3 fair value measurements, which Autodesk adopted February 1, 2011. The adoption of this ASU did not have a material impact on Autodesk's consolidated statements of financial position, results of operations or cash flows.

In October 2009, the FASB issued ASU 2009-13 regarding ASC Subtopic 605-25 “Revenue Recognition-Multiple-element Arrangements.” This ASU addresses criteria for separating the consideration in multiple-element arrangements. ASU 2009-13 requires companies to allocate the overall consideration to each deliverable by using a best estimate of the selling price of individual deliverables in the arrangement in the absence of vendor-specific objective evidence or other third-party evidence of the selling price. In October 2009, the FASB also issued ASU 2009-14 regarding ASC Topic 985 “Software: Certain Revenue Arrangements That Include Software Elements.” This ASU modifies the scope of ASC Subtopic 985-605, “Software Revenue Recognition,” to exclude (a) non-software components of tangible products and (b) software components of tangible products that are sold, licensed or leased with tangible products when the software components and non-software components of the tangible product function together to deliver the tangible product's essential functionality. The changes under ASU 2009-13 and 2009-14 were effective prospectively for revenue arrangements entered into or materially modified in fiscal years beginning on or after June 15, 2010. Autodesk adopted the changes under ASU 2009-13 and 2009-14 effective February 1, 2011. The adoption of this ASU did not have a material impact on Autodesk's consolidated statements of financial position, results of operations or cash flows.

Recently Issued Accounting Standards

In December 2011, the FASB issued ASU 2011-11 regarding ASC Topic 210 "Balance Sheet: Disclosure about Offsetting Assets and Liabilities." This ASU requires that entities disclose additional information about offsetting and related arrangements to enable users of the financial statements to understand the effect of those arrangements on the financial position. This ASU will be effective for Autodesk's fiscal year beginning February 1, 2013. Autodesk believes that the adoption of this ASU may impact future disclosures but will not impact its consolidated statements of financial position, results of operations or cash flows.

In September 2011, the FASB issued ASU 2011-08 regarding ASC Topic 350 “Intangibles - Goodwill and Other.” This ASU allows for the option to first assess qualitative factors to determine whether the existence of events or circumstances leads to a determination that it is more likely than not that the fair value of a reporting unit is less than its carrying amount. If, after assessing the totality of events or circumstances, it is more likely than not that the fair value of the reporting unit is greater than its carrying value, then performing the two-step impairment test is unnecessary. This ASU will be effective for Autodesk's fiscal year beginning February 1, 2012. Autodesk believes that the adoption of this ASU will not have a material impact on its consolidated statements of financial position, results of operations or cash flows.

In June 2011, the FASB issued ASU 2011-05 regarding ASC Topic 220 “Comprehensive Income.” This ASU eliminates the option to present components of other comprehensive income as part of the statement of changes in stockholders' equity and requires the presentation of the total of comprehensive income, the components of net income, and the components of other comprehensive income either in a single continuous statement of comprehensive income or in two separate but consecutive statements. In December 2011, the FASB issued ASU 2011-12 in order to defer new requirements around the presentation of reclassification adjustments on the face of the financial statements between accumulated other comprehensive income and the components of net income and other comprehensive income originally issued in ASU 2011-05. Both ASUs will be effective for Autodesk's fiscal year beginning February 1, 2012. Autodesk currently believes that these new accounting pronouncements will impact the presentation of other comprehensive income but will not impact its consolidated financial position, results of operations or cash flow.

In May 2011, FASB issued ASU 2011-04 regarding ASC Topic 820 “Fair Value Measurement.” This ASU updates accounting guidance to clarify how to measure fair value to align the guidance surrounding Fair Value Measurement within GAAP and International Financial Reporting Standards. In addition, the ASU updates certain requirements for measuring fair value and for disclosure around fair value measurement. It does not require additional fair value measurements and the ASU was not intended to establish valuation standards or affect valuation practices outside of financial reporting. This ASU will be effective for Autodesk's fiscal year beginning February 1, 2012. Early adoption is not permitted. Autodesk believes that the adoption of this ASU will not have a material impact on its consolidated statements of financial position, results of operations

59

or cash flows.

2.    Financial Instruments

The following tables summarizes the Company's financial instruments' amortized cost, gross unrealized gains, gross unrealized losses, and fair value by significant investment category as of January 31, 2012 and 2011.

			January 31, 2012
			Amortized Cost		Gross unrealized gains		Gross unrealized losses			Fair Value		Level 1		Level 2		Level 3
Cash equivalents (1):
	Certificates of deposit and time deposits		$	493.6	$	—	$	—		$	493.6	$	11.3	$	482.3	$	—
	Commercial paper		297.9		—		—			297.9		—		297.9		—
	Money market funds		62.1		—		—			62.1		—		62.1		—
Marketable securities:
	Short-term available for sale
		Commercial paper and corporate debt securities	143.7		0.1		—			143.8		35.3		108.5		—
		Certificates of deposit and time deposits	5.2		—		—			5.2		—		5.2		—
		U.S. treasury securities	30.7		—		—			30.7		30.7		—		—
		U.S. government agency securities	38.2		—		—			38.2		38.2		—		—
		Municipal securities	4.7		—		—			4.7		4.7		—		—
		Other	0.3		—		—			0.3		0.3		—		—
	Short-term trading securities
		Mutual funds	29.8		1.8		(0.1		)	31.5		31.5		—		—
	Long-term available for sale
		Corporate debt securities	107.8		1.0		(0.2		)	108.6		108.6		—		—
		U.S. treasury securities	23.6		0.2		—			23.8		23.8		—		—
		U.S. government agency securities	51.4		0.2		—			51.6		51.6		—		—
		Municipal securities	4.6		—		—			4.6		4.6		—		—
		Taxable auction-rate securities	4.2		—		—			4.2		—		—		4.2
Convertible debt securities (2)			18.3		—		—			18.3		—		—		18.3
Derivative contracts (3)			11.6		6.5		(2.2		)	15.9		—		9.7		6.2
		Total	$	1,327.7	$	9.8	$	(2.5	)	$	1,335.0	$	340.6	$	965.7	$	28.7

____________________ 

(1) Included in “Cash and cash equivalents” in the accompanying Consolidated Balance Sheets.

(2) Included in "Other assets" in the accompanying Consolidated Balance Sheets.

(3) Included in “Prepaid expenses and other current assets,” "Other assets," or “Other accrued liabilities” in the accompanying Consolidated Balance Sheets.

60

			January 31, 2011
			Amortized Cost		Gross unrealized gains		Gross unrealized losses			Fair Value		Level 1		Level 2		Level 3
Cash equivalents (1):
	Certificates of deposit and time deposits		$	383.3	$	—	$	—		$	383.3	$	97.9	$	285.4	$	—
	Commercial paper		331.0		—		—			331.0		—		331.0		—
	Money market funds		43.8		—		—			43.8		—		43.8		—
Marketable securities:
	Short-term available for sale
		Commercial paper and corporate debt securities	47.6		0.1		—			47.7		37.7		10.0		—
		Certificates of deposit and time deposits	29.0		—		—			29.0		25.0		4.0		—
		U.S. treasury securities	26.0		—		—			26.0		26.0		—		—
		U.S. government agency securities	47.2		—		—			47.2		47.2		—		—
		Sovereign debt	9.1		—		—			9.1		—		9.1		—
		Municipal securities	8.6		—		—			8.6		8.6		—		—
		Other	0.3		—		—			0.3		0.3		—		—
	Short-term trading securities
		Mutual funds	29.7		1.7		(0.1		)	31.3		31.3		—		—
	Long-term available for sale
		Corporate debt securities	152.6		1.5		(0.1		)	154.0		154.0		—		—
		U.S. treasury securities	12.7		0.1		—			12.8		12.8		—		—
		U.S. government agency securities	12.7		0.2		—			12.9		12.9		—		—
		Municipal securities	4.7		—		—			4.7		4.7		—		—
		Sovereign debt	3.9		0.1		—			4.0		—		4.0		—
		Taxable auction-rate securities	4.2		—		—			4.2		—		—		4.2
Derivative contracts (2)			3.9		1.9		(1.9		)	3.9		—		3.9		—
		Total	$	1,150.3	$	5.6	$	(2.1	)	$	1,153.8	$	458.4	$	691.2	$	4.2

____________________ 

(1) Included in “Cash and cash equivalents” in the accompanying Consolidated Balance Sheets.

(2) Included in “Prepaid expenses and other current assets,” "Other assets," or “Other accrued liabilities” in the accompanying Consolidated Balance Sheets.

Autodesk classifies its marketable securities as either short-term or long-term based on each instrument’s underlying contractual maturity date. Marketable securities with remaining maturities of less than 12 months are classified as short-term and marketable securities with remaining maturities greater than 12 months are classified as long-term. Autodesk may sell certain of its marketable securities prior to their stated maturities for strategic purposes or in anticipation of credit deterioration.

Autodesk applies fair value accounting for certain financial assets and liabilities, which consist of cash equivalents, marketable securities and other financial instruments, on a recurring basis. The Company defines fair value as the price that would be received from selling an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. Fair value is estimated by applying the following hierarchy, which prioritizes the inputs used to measure fair value into three levels and bases the categorization within the hierarchy upon the lowest level of input that is available and significant to the fair value measurement: (Level 1) observable inputs such as quoted prices in active markets; (Level 2) inputs other than quoted prices in active markets for identical assets and liabilities, quoted prices for identical or similar assets or liabilities in inactive markets, or other inputs that are observable or can be corroborated by observable market data for substantially the full term of the assets or liabilities; and (Level 3) unobservable inputs for which there is little or no market data, which require Autodesk to develop its own assumptions. When determining fair value, Autodesk uses observable market data and relies on unobservable inputs only when observable market data is not available. There have been no transfers between fair value measurement levels during the year ended January 31, 2012.

Autodesk's cash equivalents, marketable securities and financial instruments are primarily classified within Level 1 or

61

Level 2 of the fair value hierarchy. Autodesk values it's available for sale securities on pricing from pricing vendors, who may use quoted prices in active markets for identical assets (Level 1) or inputs other than quoted prices that are observable either directly or indirectly in determining fair value (Level 2). Autodesk's Level 2 securities are valued primarily using observable inputs other than quoted prices in active markets for identical assets and liabilities. Autodesk's Level 3 securities consist of investments held in auction rate securities, convertible debt securities and derivative contracts which are valued using probability weighted discounted cash flow models and some of the inputs to the models are unobservable in the market.

A reconciliation of the change in Autodesk’s Level 3 items for the fiscal years ended January 31, 2012 and 2011 was as follows:

	Fair Value Measurements Using Significant Unobservable Inputs
	(Level 3)
		Derivative Contracts		Convertible Debt Securities		Money Market Funds			Taxable Auction-Rate Securities			Total
Balance at January 31, 2010		$	—	$	—	$	10.0		$	7.6		$	17.6
Transfers into (out of) Level 3		—		—		—			—			—
Redemptions		—		—		(11.7		)	(3.4		)	(15.1		)
Total realized/unrealized gains (losses) included in earnings		—		—		1.7			—			1.7
Balance at January 31, 2011		—		—		—			4.2			4.2
Purchases		6.2		18.3		—			—			24.5
Transfers into (out of) Level 3		—		—		—			—			—
Redemptions		—		—		—			—			—
Total realized/unrealized gains (losses) included in earnings		—		—		—			—			—
Balance at January 31, 2012		$	6.2	$	18.3	$	—		$	4.2		$	28.7

The following table summarizes the estimated fair value of our “available-for-sale securities” classified by the contractual maturity date of the security:

	January 31, 2012
	Cost		Fair Value
Due in 1 year	$	222.8	$	222.9
Due in 1 year through 5 years	205.7		206.9
Due in 5 years through 10 years	—		—
Due after 10 years	4.2		4.2
Total	$	432.7	$	434.0

As of January 31, 2012 and 2011, Autodesk did not have any securities in a continuous unrealized loss position for greater than twelve months.

The sales or redemptions of “available-for-sale securities” in fiscal 2012 and fiscal 2010 resulted in no gains or losses. The sales or redemptions of “available-for-sale securities” for fiscal 2011 resulted in a gain of $1.7 million and no losses. The cost of securities sold is based on the specific identification method. Proceeds from the sale and maturity of marketable securities were $559.1 million in fiscal 2012, $410.7 million in fiscal 2011 and $355.1 million in fiscal 2010.

Derivative Financial Instruments

Under its risk management strategy, Autodesk uses derivative instruments to manage its short-term exposures to fluctuations in foreign currency exchange rates which exist as part of ongoing business operations. Autodesk's general practice is to hedge a majority of transaction exposures denominated in euros, Japanese yen, Swiss francs, British pounds, Canadian dollars and Australian dollars. These instruments have maturities between one to twelve months in the future. Autodesk does not enter into derivative instrument transactions for trading or speculative purposes.

62

The bank counterparties in all contracts expose Autodesk to credit-related losses in the event of their nonperformance. However, to mitigate that risk, Autodesk only contracts with counterparties who meet the Company's minimum requirements under its counterparty risk assessment process. Autodesk monitors ratings, credit spreads and potential downgrades on at least a quarterly basis. Based on Autodesk's on-going assessment of counterparty risk, the Company will adjust its exposure to various counterparties. Autodesk generally enters into master netting arrangements, which reduce credit risk by permitting net settlement of transactions with the same counterparty.  However, Autodesk does not have any master netting arrangements in place with collateral features.

Foreign currency contracts designated as cash flow hedges

Autodesk utilizes foreign currency contracts to reduce the exchange rate impact on a portion of the net revenue or operating expense of certain anticipated transactions. These contracts are designated and documented as cash flow hedges. The effectiveness of the cash flow hedge contracts is assessed quarterly using regression analysis as well as other timing and probability criteria. To receive cash flow hedge accounting treatment, all hedging relationships are formally documented at the inception of the hedge and the hedges are expected to be highly effective in offsetting changes to future cash flows on hedged transactions. The gross gains and losses on these hedges are included in “Accumulated other comprehensive income (loss)” and are reclassified into earnings at the time the forecasted revenue or expense is recognized. In the event the underlying forecasted transaction does not occur, or it becomes probable that it will not occur, Autodesk reclassifies the gain or loss on the related cash flow hedge from “Accumulated other comprehensive income (loss)” to “Interest and other income (expense), net” in the Company's Consolidated Financial Statements at that time.

The net notional amount of these contracts was $419.6 million at January 31, 2012 and $345.5 million at January 31, 2011. Balances presented below are presented as net settled. Outstanding contracts are recognized as either assets or liabilities on the balance sheet at fair value. The majority of the net gain of $9.2 million remaining in “Accumulated Other Comprehensive Income (Loss)” as of January 31, 2012 is expected to be recognized into earnings within the next twelve months.

Derivatives not designated as hedging instruments

Autodesk uses foreign currency contracts which are not designated as hedging instruments to reduce the exchange rate risk associated primarily with foreign currency denominated receivables and payables. These forward contracts are marked-to-market at the end of each fiscal quarter with gains and losses recognized as “Interest and other income (expense), net.” These derivative instruments do not subject the Company to material balance sheet risk due to exchange rate movements because gains and losses on these derivative instruments are intended to offset the gains or losses resulting from the settlement of the underlying foreign currency denominated receivables and payables. The net notional amounts of these foreign currency contracts were $75.1 million at January 31, 2012 and $56.1 million at January 31, 2011.

In addition to these foreign currency contracts, Autodesk holds derivative instruments issued by privately held companies, which are not designated as hedging instruments. These derivatives consist of certain conversion options on the convertible debt securities held by Autodesk and an option to acquire a privately held company. These derivatives are recorded at fair value as of each balance sheet date and are recorded in “Other assets.” Changes in the fair values of these instruments are recognized in income as “Interest and other income (expense), net.”

63

Fair Value of Derivative Instruments:

The fair value of derivative instruments in Autodesk’s Consolidated Balance Sheets were as follows as of January 31, 2012 and January 31, 2011:

	Balance Sheet Location	Fair Value at
		January 31, 2012		January 31, 2011
Derivative Assets
Foreign currency contracts designated as cash flow hedges	Prepaid expenses and other current assets	$	11.9	$	5.1
Derivatives not designated as hedging instruments	Other assets	6.2		—
Total derivative assets		$	18.1	$	5.1
Derivative Liabilities
Foreign currency contracts designated as cash flow hedges	Other accrued liabilities	$	2.2	$	1.2
Total derivative liabilities		$	2.2	$	1.2

The effects of derivatives designated as hedging instruments on Autodesk’s Consolidated Statements of Operations were as follows for the fiscal years ended January 31, 2012 and 2011, respectively (amounts presented include any income tax effects):

	Foreign Currency Contracts
	Fiscal Year Ended January 31,
	2012			2011
Amount of gain (loss) recognized in accumulated other comprehensive income ("OCI") on derivatives (effective portion)	$	12.8		$	11.8
Amount and Location of Gain (Loss) Reclassified from Accumulated OCI into Income (Effective Portion)
Net revenue	$	(1.9	)	$	13.0
Operating expenses	4.6			2.1
Total	$	2.7		$	15.1
Amount and Location of Gain (Loss) Recognized in Income on Derivatives (Ineffective Portion and Amount Excluded from Effectiveness Testing)
Interest and other income (expense), net	$	0.3		$	0.1

The effects of derivatives not designated as hedging instruments on Autodesk’s Consolidated Statements of Operations were as follows for the fiscal years ended January 31, 2012 and 2011, respectively (amounts presented include any income tax effects):

	Foreign Exchange Contracts
	Fiscal Year Ended January 31,
	2012			2011
Amount and Location of Gain (Loss) Recognized in Income on Derivative
Interest and other income, net	$	(1.3	)	$	2.3

3.    Employee and Director Stock Plans

Stock Plans

As of January 31, 2012, Autodesk maintained two active stock option plans for the purpose of granting equity awards to employees and to non-employee members of Autodesk’s Board of Directors: the 2012 Employee Stock Plan (“2012 Employee Plan”), which is available only to employees, and the Autodesk 2012 Outside Directors’ Plan (“2012 Directors' Plan”), which is

64

available only to non-employee directors. Additionally, there are eight expired or terminated plans with options outstanding. The exercise price of all stock options granted under these plans was equal to the fair market value of the stock on the grant date.

The 2012 Employee Plan was approved by Autodesk's stockholders and became effective on January 6, 2012. The 2012 Employee Plan replaced the 2008 Employee Stock Plan, as amended ("2008 Plan") and no further equity awards may be granted under the 2008 Plan. The 2012 Employee Plan reserves up to 21.2 million shares which includes 15.2 million shares reserved upon the effectiveness of the 2012 Employee Plan as well as up to 6.0 million shares forfeited under certain prior employee stock plans during the life of the 2012 Employee Plan. The 2012 Employee Plan permits the grant of stock options, restricted stock units and restricted stock awards. Each restricted stock unit or restricted stock award granted will be counted against the shares authorized for issuance under the 2012 Employee Plan as 1.79 shares. If a granted option, restricted stock unit or restricted stock award expires or becomes unexercisable for any reason, the unpurchased or forfeited shares that were granted may be returned to the 2012 Employee Plan and may become available for future grant under the 2012 Employee Plan. As of January 31, 2012, no options or restricted stock have been granted under the 2012 Employee Plan. Options and restricted stock that were granted under the 2008 Stock Plan vest over periods ranging from immediately upon grant to over a four year period and options expire within four to ten years from the date of grant. The 2012 Employee Plan will expire on June 30, 2022. At January 31, 2012, 15.4 million shares were available for future issuance under the 2012 Employee Plan.

The 2012 Director's Plan was approved by Autodesk's stockholders and became effective on January 6, 2012. The 2012 Directors' Plan replaced the 2010 Outside Directors' Plan, as amended ("2010 Plan"). The 2012 Directors' Plan permits the grant of stock options, restricted stock units and restricted stock awards to non-employee members of Autodesk’s Board of Directors. Each restricted stock unit or restricted stock award granted will be counted against the shares authorized for issuance under the 2012 Directors' Plan as 2.11 shares. As of January 31, 2012, no options or restricted stock have been granted under the 2012 Directors' Plan. Options and restricted stock that were granted under the 2010 Outside Directors' Plan vest over periods ranging from one year to over a four year period and options expire within seven years from the date of grant. The 2012 Directors' Plan reserved 2.6 million shares of Autodesk common stock. The 2012 Employee Plan will expire on June 30, 2022. At January 31, 2012, 2.6 million shares were available for future issuance under the 2012 Director's Plan.

The following sections summarize activity under Autodesk’s stock plans.

Stock Options:

A summary of stock option activity for the fiscal year ended January 31, 2012 is as follows:

	Number of Shares		Weighted average exercise price per share
	(in millions)
Options outstanding at January 31, 2011	30.4		$	28.93
Granted	5.4		40.71
Exercised	(5.3	)	24.85
Canceled	(2.1	)	36.29
Options outstanding at January 31, 2012	28.4		$	31.39
Options exercisable at January 31, 2012	16.7		$	30.98
Options vested and exercisable as of January 31, 2012 and expected to vest thereafter (1)	27.7		$	31.25
Options available for grant at January 31, 2012	18.0

——————

(1) Options expected to vest reflect an estimated forfeiture rate. The weighted average remaining contractual life for these options is 3.9 years and the aggregate intrinsic value is $199.3 million.

65

As of January 31, 2012, total compensation cost of $74.9 million related to non-vested options is expected to be recognized over a weighted average period of 1.7 years. The following table summarizes information about the pre-tax intrinsic value of options exercised, and the weighted average grant date fair value per share of options granted, during the fiscal years ended January 31, 2012, 2011 and 2010.

	Fiscal year ended January 31,
	2012		2011		2010
Intrinsic value of options exercised (1)	$	85.7	$	61.9	$	18.8
Weighted average grant date fair value per share of stock options granted (2)	$	14.04	$	9.30	$	6.13

——————

(1) The intrinsic value of options exercised is calculated as the difference between the exercise price of the option and the market value of the stock on the date of exercise.

(2) The weighted average grant date fair value per share of stock options granted is calculated, as of the stock option grant date, using the BSM option pricing model.

The following table summarizes information about options outstanding and exercisable at January 31, 2012:

	Options Exercisable						Options Outstanding
	Number of Shares (in millions)	Weighted average contractual life (in years)	Weighted average exercise price per share		Aggregate intrinsic value(1) (in millions)		Number of Shares (in millions)	Weighted average contractual life (in years)	Weighted average exercise price per share		Aggregate intrinsic value(1) (in millions)
Range of per-share exercise prices:
$2.28 - $17.37	3.8		$	12.94			5.8		$	13.61
$17.39 - $29.49	2.6		25.81				6.1		27.64
$29.50 - $37.16	4.4		32.94				6.0		32.72
$37.26 - $41.62	2.0		38.40				5.9		40.46
$42.01 - $49.80	3.9		45.69				4.6		45.42
	16.7	2.1	$	30.98	$	127.7	28.4	4.0	$	31.39	$	201.3

____________________ 

(1) Represents the total intrinsic value, based on Autodesk’s closing stock price of $36.00 per share as of January 31, 2012, which would have been received by the option holders had all option holders exercised their options as of that date.

These options will expire if not exercised at specific dates ranging through December 2021.

Restricted Stock:

A summary of restricted stock award and restricted stock unit activity for the fiscal year ended January 31, 2012 is as follows:

	Unreleased Restricted Stock		Weighted average grant date fair value
	(in thousands)
Unreleased restricted stock at January 31, 2011	1,426.8		$	30.43
Granted	1,610.5		37.07
Released	(707.6	)	25.95
Canceled	(145.6	)	32.37
Unreleased restricted stock at January 31, 2012	2,184.1		$	36.65

During the fiscal year ended January 31, 2012, Autodesk granted approximately 1,594.5 thousand restricted stock units.

66

The restricted stock units vest over periods ranging from immediately upon grant to a pre-determined date that is typically within three years from the date of grant. Restricted stock units are not considered outstanding stock at the time of grant, as the holders of these units are not entitled to any of the rights of a stockholder, including voting rights. The fair value of the restricted stock units is expensed ratably over the vesting period. Autodesk recorded stock-based compensation expense related to restricted stock units of $29.1 million and $8.9 million during fiscal years ended January 31, 2012 and 2011, respectively. As of January 31, 2012, total compensation cost not yet recognized of $47.7 million related to non-vested awards, is expected to be recognized over a weighted average period of 1.6 years. At January 31, 2012, the number of units granted but unreleased was 2,170.6 thousand.

During the fiscal year ended January 31, 2012, Autodesk granted approximately 16,000 restricted stock awards. Restricted stock awards vest on the date of the next annual meeting. Restricted stock awards are considered outstanding at the time of grant, as the stock award holders are entitled to many of the rights of a stockholder, including voting rights. The fair value of the restricted stock awards is expensed ratably over the vesting period. Autodesk recorded stock-based compensation expense related to restricted stock awards of $0.6 million and $0.7 million during fiscal years ended January 31, 2012 and 2011, respectively. As of January 31, 2011, total compensation cost not yet recognized of $0.2 million related to non-vested awards, is expected to be recognized over a weighted average period of 0.4 years. At January 31, 2012, the number of awards granted but unreleased was 13,500.

1998 Employee Qualified Stock Purchase Plan (“ESP Plan”)

Under Autodesk’s ESP Plan, which was approved by stockholders in 1998, eligible employees may purchase shares of Autodesk’s common stock at their discretion using up to 15% of their eligible compensation subject to certain limitations, at not less than 85% of fair market value as defined in the ESP Plan. At January 31, 2012, a total of 29.7 million shares were available for future issuance. This amount automatically increases on the first trading day of each fiscal year by an amount equal to the lesser of 10.0 million shares or 2% of the total of (1) outstanding shares plus (2) any shares repurchased by Autodesk during the prior fiscal year. Under the ESP Plan, the Company issues shares on the first trading day following March 31 and September 30 of each fiscal year. The ESP Plan expires during fiscal 2018.

Autodesk issued 2.8 million shares under the ESP Plan at an average price of $18.26 per share in fiscal 2012, 3.2 million shares at an average price of $14.77 per share in fiscal 2011, and 3.1 million shares at an average price of $14.41 per share in fiscal 2010. The weighted average grant date fair value of awards granted under the ESP Plan during fiscal 2012, 2011 and 2010, calculated as of the award grant date using the BSM option pricing model, was $9.95, $10.11 and $7.19 per share, respectively. Autodesk recorded $23.8 million, $18.2 million and $26.6 million of compensation expense associated with the ESP Plan in fiscal 2012, 2011 and 2010, respectively.

Equity Compensation Plan Information

The following table summarizes the number of outstanding options granted to employees and directors, as well as the number of securities remaining available for future issuance under these plans as of January 31, 2012 (number of securities in millions).

	(a)	(b)		(c)
Plan category	Number of securities to be issued upon exercise of outstanding options	Weighted-average exercise price of outstanding options		Number of securities remaining available for future issuance under equity compensation plans (excluding securities reflected in column (a))
Equity compensation plans approved by security holders	30.2	$	29.38	47.7	(1)
Equity compensation plans not approved by security holders(2)	0.4	$	11.03	—
Total	30.6	$	29.15	47.7

____________________ 

(1) Included in this amount are 29.7 million securities available for future issuance under Autodesk’s ESP Plan.

(2) Amounts correspond to Autodesk’s Nonstatutory Stock Option Plan, which was terminated by the Board of Directors in December 2004.

67

4.    Income Taxes

The provision for income taxes consists of the following:

	Fiscal year ended January 31,
	2012			2011			2010
Federal:
Current	$	54.3		$	16.0		$	12.3
Deferred	(34.5		)	(8.2		)	(33.0		)
State:
Current	4.9			(1.5		)	3.0
Deferred	1.3			7.4			7.1
Foreign:
Current	55.9			48.4			34.1
Deferred	(4.3		)	(2.1		)	3.2
	$	77.6		$	60.0		$	26.7

During fiscal year 2012, the Company reduced its current federal and state taxes payable by $31.3 million primarily related to excess tax benefits from non-qualified stock options, offsetting additional paid-in capital. Pursuant to accounting standards related to stock-based compensation, the Company has unrecorded excess stock option tax benefits of $150.1 million as of January 31, 2012. These amounts will be credited to additional paid-in-capital when such amounts reduce cash taxes payable. Foreign pretax income was $383.7 million in fiscal 2012, $321.1 million in fiscal 2011, and $253.9 million in fiscal 2010.

The differences between the U.S. statutory rate and the aggregate income tax provision are as follows:

	Fiscal year ended January 31,
	2012			2011			2010
Income tax provision at U.S. Federal statutory rate	$	127.0		$	95.2		$	29.7
State income tax expense (benefit), net of the U.S. Federal benefit	2.8			1.4			(0.6		)
Foreign income taxed at rates different from the U.S. statutory rate	(61.5		)	(39.7		)	(22.7		)
U.S. valuation allowance	1.7			2.8			14.9
Non-deductible stock-based compensation	12.8			7.9			11.7
Research and development tax credit benefit	(6.0		)	(5.6		)	(4.7		)
Tax benefit from closure of income tax audits and decreases in uncertain tax positions	(0.4		)	(2.8		)	(2.5		)
Officer compensation in excess of $1.0 million	1.9			0.5			0.3
Goodwill impairment	—			—			—
Non-deductible in-process research and development charge	—			—			—
Other	(0.7		)	0.3			0.6
	$	77.6		$	60.0		$	26.7

68

Significant components of Autodesk’s deferred tax assets and liabilities are as follows:

	January 31,
	2012			2011
Nonqualified stock options	$	71.6		$	69.0
Research and development tax credit carryforwards	49.3			64.0
Foreign tax credit carryforwards	0.1			16.6
Accrued compensation and benefits	35.6			33.7
Other accruals not currently deductible for tax	31.1			20.8
Purchased technology and capitalized software	20.6			25.3
Fixed assets	15.9			15.1
Tax loss carryforwards	12.4			6.3
Other	3.7			2.6
Total deferred tax assets	240.3			253.4
Less: valuation allowance	(47.5		)	(42.9		)
Net deferred tax assets	192.8			210.5
Tax method change on advanced payments	(6.3		)	(9.4		)
Unremitted earnings of foreign subsidiaries	(20.6		)	(53.6		)
Total deferred tax liability	(26.9		)	(63.0		)
Net deferred tax assets	$	165.9		$	147.5

The valuation allowance increased by $4.6 million, $3.9 million and $14.3 million in fiscal 2012, 2011 and 2010, respectively. The fiscal 2012, fiscal 2011, and fiscal 2010 changes in valuation allowance were related to California and Canadian deferred taxes. During the first quarter of fiscal 2010, the State of California enacted legislation significantly altering California tax law. As a result of the newly enacted legislation, Autodesk expects that in fiscal years 2012 and beyond, income subject to tax in California will be less than under prior tax law and accordingly, deferred tax assets are less likely to be realized.

No provision has been made for federal income taxes on unremitted earnings of certain Autodesk's foreign subsidiaries (cumulatively $1,290.1 million at January 31, 2012) because Autodesk plans to reinvest such earnings indefinitely. At January 31, 2012, the net unrecognized deferred tax liability for these earnings was approximately $390.9 million.

Realization of the Company's net deferred tax assets of $165.9 million is dependent upon the Company's ability to generate future taxable income in appropriate tax jurisdictions to obtain benefit from the reversal of temporary differences, net operating loss carryforwards and tax credits. The amount of deferred tax assets considered realizable is subject to adjustment in future periods if estimates of future taxable income are reduced.

As of January 31, 2012, Autodesk had $34.2 million of cumulative federal tax loss carryforwards and $306.9 million of cumulative state tax loss carryforwards, which may be available to reduce future income tax liabilities in certain jurisdictions. These federal and state tax loss carryforwards will expire beginning fiscal 2013 through fiscal 2032 and fiscal 2013 through fiscal 2032, respectively.

As of January 31, 2012, Autodesk had $77.8 million of cumulative federal research tax credit carryforwards, $34.3 million of cumulative California state research tax credit carryforwards and $50.1 million of cumulative Canadian federal tax credit carryforwards, which may be available to reduce future income tax liabilities in the respective jurisdictions. The federal credit carryforwards will expire beginning fiscal 2013 through fiscal 2032, the state credit carryforwards may reduce future California income tax liabilities indefinitely, and the Canadian tax credit carryforwards will expire beginning fiscal 2023 through fiscal 2032. Autodesk also has $60.0 million of cumulative foreign tax credit carryforwards, which may be available to reduce future U. S. tax liabilities. The foreign tax credit will expire beginning fiscal 2020 through fiscal 2022.

Utilization of net operating losses and tax credits may be subject to an annual limitation due to ownership change limitations provided in the Internal Revenue Code and similar state provisions. This annual limitation may result in the

69

expiration of net operating losses and credits before utilization.

As a result of certain business and employment actions and capital investments undertaken by Autodesk, income earned in certain Europe and Asia Pacific countries is subject to reduced tax rates through fiscal 2016 and 2019, respectively. with extensions available with incremental business and employment actions. The income tax benefits attributable to the tax status of these business arrangements are estimated to be $10.4 million in fiscal 2012 ($0.046 basic net income per share) and zero in both fiscal 2011 and 2010. The income tax benefits were offset partially by accruals of U.S. income taxes on undistributed earnings, among other factors.

During fiscal 2012, Autodesk recognized income tax expense of $4.4 million related to California taxes, including an increase in the valuation allowance against California deferred taxes.  Autodesk also recognized tax benefits of $4.0 million related to changes in estimates as a result of U.S. and foreign tax return filings.

During fiscal 2011, Autodesk recognized income tax expense of approximately $2.1 million primarily related to a change in the expected future tax rates and the increase of a valuation allowance against California deferred taxes of $4.9 million partially offset by the closure of audits and other decreases in uncertain tax positions of $2.8 million.

During fiscal 2010, Autodesk recognized income tax expense of approximately $17.7 million primarily related to a change in the expected future tax rates and the establishment of a valuation allowance against California deferred taxes of $20.2 million partially offset by the closure of audits and other decreases in uncertain tax positions with respect to fiscal 2003 of $2.5 million.

As of January 31, 2012, the Company had $201.1 million of gross unrecognized tax benefits, of which $187.8 million would impact the effective tax rate, if recognized. It is possible that the amount of unrecognized tax benefits will change in the next twelve months; however an estimate of the range of the possible change cannot be made at this time.

A reconciliation of the beginning and ending amount of the gross unrecognized tax benefits is as follows:

	2012			2011			2010
Gross unrecognized tax benefits at the beginning of the fiscal year	$	188.4		$	178.2		$	169.4
Increases for tax positions of prior years	0.4			2.0			3.1
Decreases for tax positions of prior years	(0.4		)	(3.5		)	(1.9		)
Increases for tax positions related to the current year	14.3			13.9			11.1
Decreases for lapse of statute of limitations/audit settlements	(1.6		)	(2.2		)	(3.5		)
Gross unrecognized tax benefits at the end of the fiscal year	$	201.1		$	188.4		$	178.2

It is the Company's continuing practice to recognize interest and/or penalties related to income tax matters in income tax expense. The Company had $2.4 million, $1.9 million and $2.2 million, net of tax benefit, accrued for interest and zero accrued for penalties related to unrecognized tax benefits as of January 31, 2012, 2011 and 2010, respectively.

Autodesk and its subsidiaries are subject to income tax in the United States as well as numerous state and foreign jurisdictions. The Company's U.S. and state income tax returns for fiscal year 2003 through fiscal year 2012 remain open to examination. In addition, the Company files tax returns in multiple foreign taxing jurisdictions with open tax years ranging from fiscal year 2003 to 2012.

5.    Acquisitions

During the fiscal year ended January 31, 2012, Autodesk completed the business combinations and technology purchases described below. The results of operations for the following acquisitions are included in the accompanying Consolidated Statement of Operations since their respective acquisition date. Pro forma results of operations have not been presented because the effects of the following acquisitions, individually and in the aggregate, were not material to Autodesk's Consolidated Financial Statements.

For acquisitions accounted for as business combinations, Autodesk recorded the tangible and intangible assets acquired and liabilities assumed based on their estimated fair values at the date of acquisition. The fair values assigned to the identifiable intangible assets acquired were based on estimates and assumptions determined by management. Autodesk recorded the excess of consideration transferred over the aggregate fair values as goodwill.

On March 1, 2011, Autodesk acquired Scaleform Corporation (“Scaleform”) for total cash consideration of $36.2 million.

70

Scaleform was a privately held middleware and user interface tools company, whose technology has been licensed in the development of games across all major hardware platforms. Scaleform has been integrated into, and the related goodwill was assigned to Autodesk's Media and Entertainment segment.

On March 10, 2011, Autodesk acquired Blue Ridge Numerics, Inc. (“Blue Ridge”) for total cash consideration of $41.2 million. Blue Ridge was a privately held company that designed and sold software that enables mechanical engineers to study fluid flow and thermal performance in virtual prototyping. Blue Ridge has been integrated into, and the related goodwill was assigned to Autodesk's Manufacturing segment.

On August 1, 2011, Autodesk acquired Instructables, Inc. (“Instructables”) for total cash consideration of $30.2 million. Instructables was a privately held web-based company specializing in user-created and uploaded instructions for do-it-yourself projects, on which other users can comment and rate for quality. Instructables has been integrated into, and the related goodwill was assigned to Autodesk's Platform Solutions and Emerging Business segment.

On August 24, 2011, Autodesk entered into a purchase agreement with Turbo Squid, Inc. (“Turbo Squid”) to acquire certain technology related assets for $26.0 million and entered into related cross-licensing and a commercial arrangement which is less than $0.2 million in expense per year. Additionally, Autodesk purchased the option to acquire Turbo Squid within a prescribed date range.

On October 14, 2011, Autodesk acquired Micro Application Packages Limited (“MAP”) for total cash consideration of $23.0 million. MAP was a privately held company specializing in software and services in the building information modeling (“BIM”) life cycle with the focus on fabrication. MAP has been integrated into, and the related goodwill was assigned to Autodesk's Architecture, Engineering and Construction segment.

On December 21, 2011, Autodesk acquired certain technology-related assets of T-Splines, Inc. ("T-Splines") for total cash consideration of $23.0 million. T-Splines is a privately-held company, that develops surface modeling software for industrial designers and CAD professionals. The assets of T-Splines have been integrated into, and the related goodwill was assigned to Autodesk's Manufacturing segment.

During the fiscal year ended January 31, 2012, Autodesk also completed 17 other business combination and technology acquisitions for a total cash consideration of approximately $54.8 million. These business combinations and technology acquisitions were not material individually or in aggregate to Autodesk's Consolidated Financial Statements.

The following table summarizes the fair value of the assets acquired and liabilities assumed by major class for each of the business combinations and technology acquisitions completed during the fiscal year ended January 31, 2012:

	Scaleform			Blue Ridge			Instructables			MAP			Turbo Squid		T-Splines		Other
Developed technologies	$	5.9		$	6.0		$	0.4		$	2.5		$	26.0	$	2.1	$	21.7
Customer relationships	4.4			9.2			0.2			2.0			—		0.7		3.9
Trade name	1.4			1.1			1.6			0.9			—		0.4		1.2
User List	—			—			5.1			—			—		—		—
Patent	3.6			—			—			—			—		—		—
In-process research and development	0.6			0.6			—			—			—		—		—
Goodwill	22.6			22.3			24.4			12.7			—		19.8		28.3
Deferred Revenue	—			(1.2		)	—			—			—		—		—
Deferred tax asset (liability)	(2.5		)	(3.6		)	(1.6		)	(1.6		)	—		—		0.2
Net tangible assets (liabilities)	0.2			6.8			0.1			6.5			—		—		(0.5		)
Total	$	36.2		$	41.2		$	30.2		$	23.0		$	26.0	$	23.0	$	54.8

For Instructables and MAP the allocation of purchase price consideration to the assets and liabilities is not yet finalized. The allocation of the purchase price consideration was based upon a preliminary valuation and our estimates and assumptions are subject to change within the measurement period (up to one year from the acquisition date). The primary areas of the preliminary purchase price allocation that are not yet finalized are amounts for income tax assets and liabilities, pending finalization of estimates and assumptions in respect of certain tax aspects of the transaction and residual goodwill.

71

During the fiscal year ended January 31, 2011, the Company acquired two entities, neither of which were individually material, for total consideration of $13.5 million.

6.    Deferred Compensation

At January 31, 2012, Autodesk had marketable securities totaling $447.2 million, of which $31.5 million related to investments in debt and equity securities that are held in a rabbi trust under non-qualified deferred compensation plans. The total related deferred compensation liability was $31.5 million at January 31, 2012, of which $3.2 million was classified as current and $28.3 million was classified as non-current liabilities. The value of debt and equity securities held in the rabbi trust at January 31, 2011 was $31.3 million. The total related deferred compensation liability at January 31, 2011 was $31.3 million, of which $3.4 million was classified as current and $27.9 million was classified as non-current liabilities. The current and non-current portions of the liability are recorded in the Consolidated Balance Sheets under “Accrued compensation” and “Other liabilities,” respectively.

7.    Borrowing Arrangements

During the fiscal year ended January 31, 2012, Autodesk entered into a credit agreement that provides for a $400.0 million unsecured revolving credit facility, with an option to request an increase in the amount of the credit facility by up to an additional $100.0 million. In connection with the execution of this new credit agreement, Autodesk terminated a $250.0 million U.S. line of credit facility on May 26, 2011 that would have expired in August 2012. The new credit agreement contains customary covenants that could restrict the imposition of liens on Autodesk's assets, and restrict the Company's ability to incur additional indebtedness or make dispositions of assets if Autodesk fails to maintain the financial covenants. At January 31, 2012 and January 31, 2011, Autodesk had no outstanding borrowings on either its prior or current line of credit. The new facility expires in May 2016.

8Commitments and Contingencies

Lease commitments

Autodesk leases office space and computer equipment under non-cancellable operating lease agreements that expire at various dates through 2023. The leases generally provide that Autodesk pay taxes, insurance and maintenance expenses related to the leased assets. Certain of these lease arrangements contain escalation clauses whereby monthly rent increases over time. At January 31, 2012, the aggregate future minimum lease payments required were as follows:

2013	$	50.8
2014	41.4
2015	34.9
2016	30.0
2017	23.9
Thereafter	59.9
	240.9
Less: Sublease income	3.3
	$	237.6

Rent expense related to these operating leases recognized on a straight-line basis over the lease period, was as follows:

	Fiscal Year Ended January 31,
	2012		2011		2010
Rent expense	$	53.0	$	52.1	$	56.8

Purchase commitments

In the normal course of business, Autodesk enters into various purchase commitments for goods or services. Total non-cancellable purchase commitments as of January 31, 2012 were approximately $53.5 millionfor periods through fiscal 2015. These purchase commitments primarily result from contracts for the acquisition of IT infrastructure, marketing and software

72

development services.

Autodesk has certain royalty commitments associated with the shipment and licensing of certain products. Royalty expense is generally based on a dollar amount per unit shipped or a percentage of the underlying revenue. Royalty expense, which was recorded under cost of license and other revenue on Autodesk’s Consolidated Statements of Operations, was $16.5 million in fiscal 2012, $12.8 million in fiscal 2011 and $16.5 million in fiscal 2010.

Indemnifications

In the normal course of business, Autodesk provides indemnifications of varying scopes, including limited product warranties and indemnification of customers against claims of intellectual property infringement made by third parties arising from the use of its products or services. Autodesk accrues for known indemnification issues if a loss is probable and can be reasonably estimated. Historically, costs related to these indemnifications have not been significant, and because potential future costs are highly variable, Autodesk is unable to estimate the maximum potential impact of these indemnifications on its future results of operations.

In connection with the purchase, sale or license of assets or businesses with third parties, Autodesk has entered into or assumed customary indemnification agreements related to the assets or businesses purchased, sold or licensed. Historically, costs related to these indemnifications have not been significant, and because potential future costs are highly variable, Autodesk is unable to estimate the maximum potential impact of these indemnifications on its future results of operations.

As permitted under Delaware law, Autodesk has agreements whereby it indemnifies its officers and directors for certain events or occurrences while the officer or director is, or was, serving at Autodesk’s request in such capacity. The maximum potential amount of future payments Autodesk could be required to make under these indemnification agreements is unlimited; however, Autodesk has directors’ and officers’ liability insurance coverage that is intended to reduce its financial exposure and may enable Autodesk to recover a portion of any future amounts paid. Autodesk believes the estimated fair value of these indemnification agreements in excess of applicable insurance coverage is minimal.

Legal Proceedings

Autodesk is involved in a variety of claims, suits, investigations and proceedings in the normal course of business activities including claims of alleged infringement of intellectual property rights, commercial, employment, piracy prosecution, business practices and other matters. In the Company's opinion, resolution of pending matters is not expected to have a material adverse impact on its consolidated results of operations, cash flows or its financial position. Given the unpredictable nature of legal proceedings, there is a reasonable possibility that an unfavorable resolution of one or more such proceedings could in the future materially affect the Company's results of operations, cash flows or financial position in a particular period, however, based on the information known by the Company as of the date of this filing and the rules and regulations applicable to the preparation of the Company's financial statements, any such amount is either immaterial or it is not possible to provide an estimated amount of any such potential loss.

9.    Stockholders' Equity

Preferred Stock

Under Autodesk’s Certificate of Incorporation, 2.0 million shares of preferred stock are authorized. At January 31, 2012, there were no preferred shares issued or outstanding. The Board of Directors has the authority to issue the preferred stock in one or more series and to fix rights, preferences, privileges and restrictions, including dividends and the number of shares constituting any series or the designation of such series, without any further vote or action by the stockholders.

Common Stock Repurchase Programs

Autodesk has a stock repurchase program that is used largely to help offset the dilution from the issuance of stock under the Company’s employee stock plans and for such other purposes as may be in the interests of Autodesk and its stockholders, and has the effect of returning excess cash generated from the Company's business to stockholders. During fiscal 2012, Autodesk repurchased and retired 9.7 million shares at an average repurchase price of $33.71 per share, 9.0 million shares in fiscal 2011 at an average repurchase price of $31.13 per share and 2.7 million shares in fiscal 2010 at an average repurchase price of $23.63. Common stock and additional paid-in capital and retained earnings were reduced by $211.0 million and $116.4 million, respectively for the year ended January 31, 2012 and $138.3 million and $142.0 million, respectively, for the year ended January 31, 2011, as a result of the stock repurchases.

At January 31, 2012, 14.7 million shares remained available for repurchase under repurchase plans approved by the

73

Board of Directors. In fiscal 2012, 2011 and 2010, Autodesk repurchased its common stock through open market purchases. The number of shares acquired and the timing of the purchases are based on several factors, including general market conditions, the number of employee stock option exercises, stock issuance, the trading price of Autodesk common stock, cash on hand and available in the United States, and company defined trading windows.

10.   Interest and Other Income, net

Interest and other income, net, consists of the following:

	Fiscal Year Ended January 31,
	2012			2011			2010
Interest and investment income, net	$	5.7		$	10.9		$	10.0
Gain (loss) on foreign currency	(1.1		)	(14.0		)	5.0
Other Income	2.7			3.7			4.1
Interest and other income, net	$	7.3		$	0.6		$	19.1

11.    Accumulated Other Comprehensive Income (Loss)

Accumulated other comprehensive income (loss), net of taxes, was comprised of the following at January 31:

	January 31,
	2012			2011			2010
Net gain (loss) on derivative instruments	$	9.2		$	(0.8	)	$	2.3
Net unrealized gain on available-for-sale securities	2.6			2.4			1.5
Unfunded portion of pension plans	(8.6		)	(9.8		)	(5.9		)
Foreign currency translation adjustments	2.7			7.6			(1.4		)
Accumulated other comprehensive income (loss)	$	5.9		$	(0.6	)	$	(3.5	)

12.    Net Income Per Share

Basic net income per share is computed using the weighted average number of shares of common stock outstanding for the period, including restricted stock awards and excluding stock options and restricted stock units. Diluted net income per share is based upon the weighted average shares of common stock outstanding for the period and potentially dilutive common shares, including the effect of stock options and restricted stock units under the treasury stock method. The following table sets forth the computation of the numerators and denominators used in the basic and diluted net income per share amounts:

	Fiscal Year Ended January 31,
	2012		2011		2010
Numerator:
Net income	$	285.3	$	212.0	$	58.0
Denominator:
Denominator for basic net income per share—weighted average shares	227.7		227.6		228.7
Effect of dilutive securities	5.6		6.6		3.4
Denominator for dilutive net income per share	233.3		234.2		232.1
Basic net income per share	$	1.25	$	0.93	$	0.25
Diluted net income per share	$	1.22	$	0.90	$	0.25

The computation of diluted net income per share does not include shares that are anti-dilutive under the treasury stock method because their exercise prices are higher than the average market value of Autodesk’s stock during the fiscal year. For the fiscal years ended January 31, 2012, 2011 and 2010, 12.9 million, 19.3 million and 21.3 million potentially anti-dilutive shares, respectively, were excluded from the computation of net income per share.

74

13.    Segments

Autodesk reports segment information based on the “management” approach. The management approach designates the internal reporting used by management for making decisions and assessing performance as the source of the Company’s reportable segments. Autodesk has four reportable segments: Platform Solutions and Emerging Business (“PSEB”), Architecture, Engineering and Construction (“AEC”), Manufacturing (“MFG”) and Media and Entertainment (“M&E”). Location Services, which Autodesk disposed of in February 2009, is not included in any of the above reportable segments, and is reflected as Other. Autodesk has no material inter-segment revenue.

The PSEB, AEC and MFG segments derive revenue from the sale of licenses for software products and services to customers who design, build, manage or own building, manufacturing and infrastructure projects. Our M&E segment derives revenue from the sale of products to creative professionals, post-production facilities and broadcasters for a variety of applications, including feature films, television programs, commercials, music and corporate videos, interactive game production, web design and interactive web streaming.

PSEB includes Autodesk’s design product, AutoCAD. Autodesk’s AutoCAD product is a platform product that underpins the Company’s design product offerings for the industries it serves. For example, AEC and MFG offer tailored versions of AutoCAD software for the industries they serve. Autodesk’s AutoCAD product also provides a platform for Autodesk’s developer partners to build custom solutions for a range of diverse design-oriented markets. PSEB’s revenue primarily includes revenue from sales of licenses of Autodesk’s design products, AutoCAD and AutoCAD LT, as well as the Autodesk Design Suite and many other design products.

AEC software products help to improve the way building, civil infrastructure, process plant and construction projects are designed, built and managed. A broad portfolio of solutions enables greater efficiency, accuracy and sustainability across the entire project lifecycle. Autodesk AEC solutions include advanced technology for building information modeling (“BIM”), AutoCAD-based design and documentation productivity software, sustainable design analysis applications, and collaborative project management solutions. BIM, an integrated process for building and infrastructure design, analysis, documentation and construction, uses consistent, coordination information to improve communication and collaboration between the extended project team. AEC provides a comprehensive portfolio of BIM solutions that help customers deliver projects faster and more economically, while minimizing environmental impact. AEC’s revenue primarily includes revenue from the sales of licenses of Autodesk Revit family suites, AutoCAD Civil 3D, AutoCAD Architecture and AutoCAD Map 3D products.

MFG provides the manufacturers in automotive and transportation, industrial machinery, consumer products and building products with comprehensive digital prototyping solutions that brings together design data from all phases of the product development process to develop a single digital model created in Autodesk Inventor software. Autodesk’s solutions for digital prototyping enable a broad group of manufacturers to realize benefits with minimal disruption to existing workflows. MFG’s revenue primarily includes revenue from the sales of licenses of Autodesk Inventor family suites, AutoCAD Mechanical and Autodesk Moldflow products.

M&E is comprised of two product groups: Animation, including design visualization, and Creative Finishing. Animation products, such as Autodesk 3ds Max, Autodesk Maya and the Autodesk Entertainment Creation Suite, provide tools for digital sculpting, modeling, animation, effects, rendering and compositing, for design visualization, visual effects and games production. Creative Finishing products provide editing, finishing and visual effects design and color grading.

All of Autodesk’s reportable segments distribute their respective products primarily through authorized resellers and distributors and, to a lesser extent, through direct sales to end-users.

The accounting policies of the reportable segments are the same as those described in Note 1, “Business and Summary of Significant Accounting Policies.” Autodesk evaluates each segment’s performance on the basis of gross profit. Autodesk currently does not separately accumulate and report asset information by segment, except for goodwill, which is disclosed in Note 1, “Business and Summary of Significant Accounting Policies.”

75

Information concerning the operations of Autodesk’s reportable segments is as follows:

	Fiscal year ended January 31,
	2012			2011			2010
Net revenue:
Platform Solutions and Emerging Business	$	833.1		$	716.2		$	624.0
Architecture, Engineering and Construction	626.4			568.0			513.3
Manufacturing	540.3			470.0			386.9
Media and Entertainment	215.8			197.6			189.1
Other(1)	—			—			0.4
	$	2,215.6		$	1,951.8		$	1,713.7
Gross profit:
Platform Solutions and Emerging Business	$	788.0		$	678.9		$	589.7
Architecture, Engineering and Construction	569.7			517.6			465.2
Manufacturing	496.1			439.5			358.4
Media and Entertainment	174.6			153.9			144.4
Unallocated(2)	(41.9		)	(34.7		)	(35.8		)
	$	1,986.5		$	1,755.2		$	1,521.9
Depreciation and amortization:
Platform Solutions and Emerging Business	$	1.8		$	3.0		$	3.1
Architecture, Engineering and Construction	0.7			1.6			1.8
Manufacturing	1.7			2.3			2.5
Media and Entertainment	0.5			1.1			1.8
Unallocated	110.8			97.4			102.3
	$	115.5		$	105.4		$	111.5

____________________

(1) Other primarily consisted of revenue from Autodesk’s Location Services division, which Autodesk disposed of in February 2009.

(2) Unallocated amounts primarily relate to corporate expenses and other costs and expenses that are managed outside the reportable segments, including stock-based compensation expense.

Information regarding Autodesk’s operations by geographic area is as follows:

	Fiscal year ended January 31,
	2012		2011		2010
Net revenue:
Americas
U.S.	$	631.0	$	561.6	$	527.5
Other Americas	167.5		139.9		126.9
Total Americas	798.5		701.5		654.4
Europe, Middle East and Africa	862.2		782.8		671.1
Asia Pacific
Japan	240.5		200.6		171.1
Other Asia Pacific	314.4		266.9		217.1
Total Asia Pacific	554.9		467.5		388.2
Total net revenue	$	2,215.6	$	1,951.8	$	1,713.7

76

	January 31,
	2012		2011
Long-lived assets(1):
Americas
U.S.	$	792.5	$	571.2
Other Americas	39.2		65.6
Total Americas	831.7		636.8
Europe, Middle East and Africa
Switzerland	37.7		42.8
Other Europe, Middle East and Africa	83.4		68.5
Total Europe, Middle East and Africa	121.1		111.3
Asia Pacific	50.5		41.9
Total long-lived assets	$	1,003.3	$	790.0

____________________

(1) Long-lived assets exclude investments in subsidiaries, deferred tax assets and marketable securities.

14.    Retirement Benefit Plans

Pretax Savings Plan

Autodesk has a 401(k) plan that covers nearly all U.S. employees. Eligible employees may contribute up to 50% of their pretax salary, subject to limitations mandated by the Internal Revenue Service. Autodesk makes voluntary cash contributions and matches a portion of employee contributions in cash. Autodesk’s contributions were $7.3 million in fiscal 2012, $6.7 million in fiscal 2011 and $7.1 million in fiscal 2010. Autodesk does not allow participants to invest in Autodesk common stock through the 401(k) plan.

Other Plans

Autodesk provides certain defined benefit pension plans to employees primarily located in countries outside of the U.S. The Company deposits funds for specific plans, consistent with the requirements of local law, with insurance companies or third-party trustees, and accrues for the unfunded portion of the obligation, where material. The assumptions used in calculating the obligation for these plans depend on the local economic environment. The net liability related to the funded status of the plans was approximately $18.0 million and $18.2 million as of January 31, 2012 and 2011, respectively. The projected benefit obligation was $52.8 million and $47.3 million as of January 31, 2012 and 2011, respectively. The related fair value of plan assets was $34.8 million and $29.1 million as of January 31, 2012 and 2011, respectively. Our practice is to fund the pension plans in amounts at least sufficient to meet the minimum requirements of local laws and regulations. The assets of the plans are primarily invested in high quality fixed income investments. Our contributions were approximately $4.2 million, $3.5 million and $3.4 million in fiscal 2012, 2011 and 2010, respectively. As of January 31, 2012, our estimated future benefit payments are an aggregate $10.2 million for fiscal 2013 through fiscal 2017 and an aggregate of $7.9 million for fiscal 2018 through fiscal 2022. Autodesk recorded $8.2 million and $9.8 million of unrealized changes in the unfunded portion of Autodesk’s defined benefit plans in fiscal 2012 and fiscal 2011, respectively.

Autodesk also provides defined contribution plans in certain foreign countries where required by statute. Autodesk’s funding policy for foreign defined contribution plans is consistent with the local requirements in each country. Autodesk’s contributions to these plans were $20.4 million in fiscal 2012, $13.6 million in fiscal 2011 and $13.4 million in fiscal 2010.

In addition, Autodesk offers a non-qualified deferred compensation plan to certain key employees whereby they may defer a portion (or all) of their annual compensation until retirement or a different date specified by the employee in accordance with terms of the plan. See Note 6, “Deferred Compensation,” for further discussion.

15.    Restructuring Reserves

During fiscal 2011, 2010 and 2009 Autodesk initiated restructuring plans (“Fiscal 2011 Plan,” “Fiscal 2010 Plan” and “Fiscal 2009 Plan,” respectively) in order to further reduce operating costs. These restructuring plans resulted in targeted global staff reductions of approximately 200, 430, and 700 positions in fiscal 2011, 2010 and 2009, respectively. No leased facilities were consolidated as part of the Fiscal 2011 Plan. The Fiscal 2010 Plan and Fiscal 2009 Plan resulted in the consolidation of 32 and 27 leased facilities, respectively. In connection with our restructuring plans, we recorded a favorable adjustment for changes in previous estimates during fiscal 2012.

77

The following table sets forth the restructuring activities for the fiscal years ended January 31, 2012 and 2011.

	Balances, January 31, 2011		Additions		Payments			Adjustments(1)			Balances, January 31, 2012
Fiscal 2011 Plan
Employee termination costs	$	1.5	$	—	$	(1.5	)	$	—		$	—
Fiscal 2010 Plan
Employee termination costs	—		—								—
Lease termination and asset costs	1.7		—		(1.1		)	(0.3		)	0.3
Fiscal 2009 Plan
Employee termination costs	—		—		—			—			—
Lease termination and asset costs	2.8		—		(0.9		)	(1.3		)	0.6
Other
Employee termination costs	—		—		—			—			—
Lease termination costs	2.6		—		(0.8		)	(0.3		)	1.5
Total	$	8.6	$	—	$	(4.3	)	$	(1.9	)	$	2.4
Current portion(2)	$	4.8									$	1.1
Non-current portion(2)	3.8										1.3
Total	$	8.6									$	2.4

____________________

(1) Adjustments include the impact of foreign currency translation.

(2) The current and non-current portions of the reserve are recorded in the Consolidated Balance Sheets under “Other accrued liabilities” and “Other liabilities,” respectively.

	Balances, January 31, 2010		Additions		Payments			Adjustments(1)			Balances, January 31, 2011
Fiscal 2011 Plan
Employee termination costs	$	—	$	12.4	$	(10.6	)	$	(0.3	)	$	1.5
Fiscal 2010 Plan
Employee termination costs	0.8		—		(0.8		)	—			—
Lease termination and asset costs	6.1		0.3		(4.3		)	(0.4		)	1.7
Fiscal 2009 Plan
Employee termination costs	1.0		—		(0.2		)	(0.8		)	—
Lease termination and asset costs	8.2		1.0		(4.6		)	(1.8		)	2.8
Other
Employee termination costs	0.4		—		(0.3		)	(0.1		)	—
Lease termination costs	2.9		—		(0.2		)	(0.1		)	2.6
Total	$	19.4	$	13.7	$	(21.0	)	$	(3.5	)	$	8.6
Current portion(2)	$	11.4									$	4.8
Non-current portion(2)	8.0										3.8
Total	$	19.4									$	8.6

____________________

(1) Adjustments include the impact of foreign currency translation.

(2) The current and non-current portions of the reserve are recorded in the Consolidated Balance Sheets under “Other accrued liabilities” and “Other liabilities,” respectively.

78

16.    Selected Quarterly Financial Information (Unaudited)

Summarized quarterly financial information for fiscal 2012 and 2011 is as follows:

2012	1st quarter			2nd quarter			3rd quarter			4th quarter			Fiscal year
Net revenue	$	528.3		$	546.3		$	548.6		$	592.4		$	2,215.6
Gross profit	473.7			488.9			489.0			534.9			1,986.5
Income from operations	78.6			95.0			90.2			91.8			355.6
Provision for income taxes	(15.2		)	(23.0		)	(18.5		)	(20.9		)	(77.6		)
Net income	69.3			71.2			72.8			72.0			285.3
Basic net income per share	$	0.30		$	0.31		$	0.32		$	0.32		$	1.25
Diluted net income per share	$	0.29		$	0.30		$	0.32		$	0.31		$	1.22
Income from operations includes the following items:
Stock-based compensation expense	$	25.9		$	27.3		$	25.6		$	30.0		$	108.8
Amortization of acquisition related intangibles	14.6			17.8			19.3			18.6			70.3
Restructuring benefits	—			(1.3		)	—			—			(1.3		)
2011	1st quarter			2nd quarter			3rd quarter			4th quarter			Fiscal year
Net revenue	$	474.6		$	472.8		$	476.7		$	527.7		$	1,951.8
Gross profit	423.3			424.4			428.2			479.3			1,755.2
Income from operations	50.8			79.8			69.2			71.6			271.4
Provision for income taxes	(10.5		)	(20.0		)	(18.1		)	(11.4		)	(60.0		)
Net income	36.9			59.9			53.6			61.6			212.0
Basic net income per share	$	0.16		$	0.26		$	0.24		$	0.27		$	0.93
Diluted net income per share	$	0.16		$	0.25		$	0.23		$	0.26		$	0.90
Income from operations includes the following items:
Stock-based compensation expense	$	24.3		$	21.0		$	17.0		$	18.4		$	80.7
Amortization of acquisition related intangibles	13.9			13.6			14.1			14.3			55.9
Restructuring charges	7.1			1.9			—			1.8			10.8

79

REPORT OF ERNST & YOUNG LLP, INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

The Board of Directors and Stockholders of Autodesk, Inc.

We have audited the accompanying consolidated balance sheets of Autodesk, Inc. as of January 31, 2012 and 2011, and the related consolidated statements of operations, cash flows and stockholders’ equity for each of the three years in the period ended January 31, 2012. Our audits also included the financial statement schedule listed in the Index at Item 15(a)(2). These financial statements and schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements and schedule based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of Autodesk, Inc. at January 31, 2012 and 2011, and the consolidated results of its operations and its cash flows for each of the three years in the period ended January 31, 2012, in conformity with U.S. generally accepted accounting principles. Also, in our opinion, the related financial statement schedule, when considered in relation to the basic financial statements taken as a whole, presents fairly in all material respects the information set forth therein.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Autodesk, Inc.’s internal control over financial reporting as of January 31, 2012, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated March 15, 2012 expressed an unqualified opinion thereon.

/s/ ERNST & YOUNG LLP

San Francisco, California

March 15, 2012

80

REPORT OF ERNST & YOUNG LLP, INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

The Board of Directors and Stockholders of Autodesk, Inc.

We have audited Autodesk, Inc.’s internal control over financial reporting as of January 31, 2012, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (the COSO criteria). Autodesk, Inc.’s management is responsible for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the company’s internal control over financial reporting based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In our opinion, Autodesk, Inc. maintained, in all material respects, effective internal control over financial reporting as of January 31, 2012, based on the COSO criteria.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Autodesk, Inc. as of January 31, 2012 and 2011, and the related consolidated statements of operations, cash flows, and stockholders’ equity for each of the three years in the period ended January 31, 2012 of Autodesk, Inc. and our report dated March 15, 2012 expressed an unqualified opinion thereon.

/s/ ERNST & YOUNG LLP

San Francisco, California

March 15, 2012

81

ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

None.

ITEM 9A. CONTROLS AND PROCEDURES

Evaluation of Disclosure Controls and Procedures

Our management evaluated, with the participation of our Chief Executive Officer and Chief Financial Officer, the effectiveness of our disclosure controls and procedures as of the end of the period covered by this Annual Report on Form 10-K. Based on this evaluation, our Chief Executive Officer and Chief Financial Officer have concluded that our disclosure controls and procedures are effective at the reasonable assurance level to ensure that information we are required to disclose in reports that we file or submit under the Securities Exchange Act of 1934 (i) is recorded, processed, summarized and reported within the time periods specified in Securities and Exchange Commission rules and forms, and (ii) is accumulated and communicated to Autodesk’s management, including our Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure. Our disclosure controls and procedures are designed to provide reasonable assurance that such information is accumulated and communicated to our management.

Changes in Internal Control Over Financial Reporting

There were no changes in our internal controls over financial reporting (as such term is defined in Rules 13a-15(f) and 15d-15(f) under the Securities Exchange Act of 1934, as amended) during the quarter ended January 31, 2012 that have materially affected, or are reasonably likely to materially affect, our internal controls over financial reporting.

Management’s Report on Internal Control over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting (as defined in Rule 13a-15(f) under the Securities Exchange Act of 1934, as amended). Our management assessed the effectiveness of our internal control over financial reporting as of January 31, 2012. In making this assessment, our management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”) in Internal Control—Integrated Framework. Our management has concluded that, as of January 31, 2012, our internal control over financial reporting is effective to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. Our independent registered public accounting firm, Ernst & Young, LLP, has issued an audit report on our internal control over financial reporting, which is included in Item 8 herein.

Our management, including our Chief Executive Officer and Chief Financial Officer, does not expect that our disclosure controls and procedures or our internal control over financial reporting will necessarily prevent all errors and all fraud. A control system, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within Autodesk have been detected.

ITEM 9B. OTHER INFORMATION

None.

82

PART III

Certain information required by Part III is omitted from this Report because the Registrant will file a definitive proxy statement pursuant to Regulation 14A for Registrant’s Annual Meeting of Stockholders, not later than 120 days after the end of the fiscal year covered by this Report (the “Proxy Statement”) and certain information included therein is incorporated herein by reference. Only those sections of the Proxy Statement that specifically address the items set forth herein are incorporated by reference.

ITEM 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

The information required by this Item is incorporated herein by reference to the sections entitled “Proposal One—Election of Directors,” “Section 16(a) Beneficial Ownership Reporting Compliance,” and “Corporate Governance” in our Proxy Statement.

EXECUTIVE OFFICERS OF THE REGISTRANT

As a result of the recent internal realignment and changes in responsibilities, our Board has re-evaluated our executive officers. The following sets forth certain information as of March 15, 2012 regarding our executive officers.

Name	Age	Position
Carl Bass	54	President and Chief Executive Officer
Mark J. Hawkins	52	Executive Vice President and Chief Financial Officer
Jan Becker	59	Senior Vice President, Human Resources and Corporate Real Estate
Steven Blum	47	Senior Vice President, Worldwide Sales and Services
Pascal W. Di Fronzo	47	Senior Vice President, General Counsel and Secretary

Carl Bass joined Autodesk in September 1993 and serves as President and Chief Executive Officer. Mr. Bass was named Chief Executive Officer in May 2006. Mr. Bass served as Interim Chief Financial Officer from August 2008 to April 2009. From June 2004 to April 2006, Mr. Bass served as Chief Operating Officer. From February 2002 to June 2004, Mr. Bass served as Senior Executive Vice President, Design Solutions Group. From August 2001 to February 2002, Mr. Bass served as Executive Vice President, Emerging Business and Chief Strategy Officer. From June 1999 to July 2001, he served as President and Chief Executive Officer of Buzzsaw.com, Inc., a spin-off from Autodesk. He has also held other executive positions within Autodesk.

Mark J. Hawkins joined Autodesk in April 2009 and serves as Executive Vice President and Chief Financial Officer. Prior to joining Autodesk, Mr. Hawkins was Chief Financial Officer and Senior Vice President of Finance and Information Technology at Logitech International S.A. from April 2006 to April 2009. Previously he was with Dell Inc. for six years, most recently serving as Vice President of Finance for worldwide procurement and logistics. Prior to joining Dell, Mr. Hawkins was employed by Hewlett-Packard Company for 18 years in finance and business-management roles. Mr. Hawkins is also a director of BMC Software, Inc.

Jan Becker joined Autodesk in September 1992 and has served as Senior Vice President, Human Resources and Corporate Real Estate since June 2000. Ms. Becker previously served in other capacities in the Human Resources Department at Autodesk. Prior to joining Autodesk, Ms. Becker worked both domestically and internationally at a number of high-tech organizations, including Sun Microsystems, Inc., Digital Equipment Corporation and Hewlett-Packard Company.

Steven Blum joined Autodesk in January 2003 and has served as Senior Vice President, Worldwide Sales and Services since February 2011. Prior to this position, Mr. Blum was Senior Vice President of Americas Sales at Autodesk from January 2003 to February 2011. Prior to joining Autodesk, Mr. Blum was Executive Vice President of Sales and Account Management for Parago, Inc., and Vice President of America's sales for Mentor Graphics.

Pascal W. Di Fronzo joined Autodesk in June 1998 and has served as Senior Vice President, General Counsel and Secretary since March 2007. From March 2006 to March 2007 Mr. Di Fronzo served as Vice President, General Counsel and Secretary and served as Vice President, Assistant General Counsel and Assistant Secretary from March 2005 through 2006. Previously, Mr. Di Fronzo served in other business and legal capacities in the Legal Department. Prior to joining Autodesk, he advised high technology and emerging growth companies on business and intellectual property transactions and litigation while in private practice.

There is no family relationship among any of our directors or executive officers.

83

ITEM 11. EXECUTIVE COMPENSATION

The information required by this Item is incorporated herein by reference to the section entitled “Executive Compensation,” in our Proxy Statement.

ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

The information required by this Item is incorporated herein by reference to the section entitled “Security Ownership of Certain Beneficial Owners and Management,” and “Executive Compensation—Equity Compensation Plan Information” in our Proxy Statement.

ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

The information required by this Item is incorporated herein by reference to the section entitled “Certain Relationships and Related Party Transactions” and “Corporate Governance—Independence of the Board of Directors” in our Proxy Statement.

ITEM 14. PRINCIPAL ACCOUNTING FEES AND SERVICES

The information required by this Item is incorporated herein by reference to the sections entitled “Proposal Two—Ratification of the Appointment of Independent Registered Public Accounting Firm” in our Proxy Statement.

84

PART IV

ITEM 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULES

(a)    The following documents are filed as part of this Report:

1.    Financial Statements:    The information concerning Autodesk’s financial statements, and Report of Ernst & Young LLP, Independent Registered Public Accounting Firm required by this Item is incorporated by reference herein to the section of this Report in Item 8, entitled “Financial Statements and Supplementary Data.”

2.    Financial Statement Schedule:    The following financial statement schedule of Autodesk, Inc., for the fiscal years ended January 31, 2012, 2011 and 2010, is filed as part of this Report and should be read in conjunction with the Consolidated Financial Statements of Autodesk, Inc.

Schedule II    Valuation and Qualifying Accounts

Schedules not listed above have been omitted because they are not applicable or are not required or the information required to be set forth therein is included in the Consolidated Financial Statements or Notes thereto.

3.    Exhibits:    See Item 15(b) below. We have filed, or incorporated into this Report by reference, the exhibits listed on the accompanying Index to Exhibits immediately following the signature page of this Form 10-K.

(b)    Exhibits:

We have filed, or incorporated into the Report by reference, the exhibits listed on the accompanying Index to Exhibits immediately following the signature page of this Form 10-K.

(c)    Financial Statement Schedules: See Item 15(a), above.

ITEM 15(A)(2) FINANCIAL STATEMENT SCHEDULE II

Description	Balance at Beginning of Year		Additions Charged to Costs and Expenses or Revenues			Deductions and Write-Offs		Balance at End of Year
	(in millions)
Fiscal Year ended January 31, 2012
Allowance for doubtful accounts	$	4.2	$	2.4		$	1.1	$	5.5
Product returns reserves	10.6		32.7			37.5		5.8
Restructuring	8.6		—			6.2		2.4
Fiscal Year ended January 31, 2011
Allowance for doubtful accounts	$	4.6	$	(0.3	)	$	0.1	$	4.2
Product returns reserves	11.8		38.9			40.1		10.6
Restructuring	19.4		13.7			24.5		8.6
Fiscal Year ended January 31, 2010
Allowance for doubtful accounts	$	8.6	$	1.7		$	5.7	$	4.6
Product returns reserves	12.5		42.9			43.6		11.8
Restructuring	43.9		48.9			73.4		19.4

85

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this Report to be signed on its behalf by the undersigned, thereunto duly authorized.

		AUTODESK, INC.
		By:	/S/    CARL BASS
			Carl Bass
			President and Chief Executive Officer
Dated:	March 15, 2012

86

POWER OF ATTORNEY

KNOW ALL PERSONS BY THESE PRESENTS, that each person whose signature appears below constitutes and appoints Carl Bass and Mark J. Hawkins each as his or her attorney-in-fact, each with the power of substitution, for him or her in any and all capacities, to sign any amendments to this Report on Form 10-K, and to file the same, with exhibits thereto and other documents in connection therewith, with the Securities and Exchange Commission, hereby ratifying and confirming all that each of said attorneys-in-fact, or his substitute or substitutes, may do or cause to be done by virtue hereof.

Pursuant to the requirements of the Securities Exchange Act of 1934, this Report has been signed below by the following persons on behalf of the Registrant and in the capacities as of March 15, 2012.

Signature	Title
/s/    CARL BASS	President and Chief Executive Officer (Principal Executive Officer)
Carl Bass
/s/    MARK J. HAWKINS	Executive Vice President and Chief Financial Officer (Principal Financial Officer )
Mark J. Hawkins
/s/    PAMELA J. STRAYER	Vice President and Corporate Controller      (Principal Accounting Officer )
Pamela J. Strayer
/s/    CRAWFORD W. BEVERIDGE	Director (Non-executive Chairman of the Board)
Crawford W. Beveridge
/s/    J. HALLAM DAWSON	Director
J. Hallam Dawson
/s/    PER-KRISTIAN HALVORSEN	Director
Per-Kristian Halvorsen
/s/    MARY T. MCDOWELL	Director
Mary T. McDowell
/s/    LORRIE M. NORRINGTON	Director
Lorrie M. Norrington
/s/    CHARLES ROBEL	Director
Charles Robel
/s/    STACY J. SMITH	Director
Stacy J. Smith
/s/    STEVEN M. WEST	Director
Steven M. West

87

Index to Exhibits

Exhibit No.	Description
2.1	Agreement and Plan of Merger, dated as of May 1, 2008, by and among Autodesk, Inc., Switch Acquisition Corporation and Moldflow Corporation (incorporated by reference to Exhibit 2.1 filed with the Registrant’s Current Report on Form 8-K filed on May 2, 2008)
3.1	Amended and Restated Certificate of Incorporation of Registrant (incorporated by reference to Exhibit 3.1 filed with the Registrant’s Annual Report on Form 10-K for the fiscal year ended January 31, 2006)
3.2	Amended and Restated Bylaws of Registrant (incorporated by reference to Exhibit 3.1 filed with the Registrant’s Current Report on Form 8-K filed on March 29, 2011)
10.1*	Registrant’s 1996 Stock Plan (incorporated by reference to Exhibit 10.1 filed with the Registrant’s Quarterly Report on Form 10-Q for the fiscal quarter ended October 31, 2005)
10.2*	Registrant’s 1996 Stock Plan Forms of Agreement (incorporated by reference to Exhibit 10.5 filed with the Registrant’s Annual Report on Form 10-K for the fiscal year ended January 31, 2005)
10.3*	Registrant’s 1998 Employee Qualified Stock Purchase Plan, as amended on September 17, 2009 (incorporated by reference to Exhibit 10.3 filed with the Registrant’s Annual Report on Form 10-K for the fiscal year ended January 31, 2010)
10.4*	Registrant’s 1998 Employee Qualified Stock Purchase Plan Forms of Agreement (incorporated by reference to Exhibit 10.2 filed with the Registrant’s Annual Report on Form 10-K for the fiscal year ended January 31, 2005)
10.5*	Registrant’s 1998 Employee Qualified Stock Purchase Plan Form of Agreement (non-U.S. Employees) (incorporated by reference to Exhibit 10.5 filed with the Registrant’s Annual Report on Form 10-K for the fiscal year ended January 31, 2009)
10.6*	Registrant’s 2000 Directors’ Option Plan, as amended (incorporated by reference to Exhibit 10.2 filed with the Registrant’s Current Report on Form 8-K filed on June 18, 2008)
10.7*	Registrant’s 2000 Directors’ Option Plan Forms of Agreements (incorporated by reference to Exhibit 10.2 filed with the Registrant’s Quarterly Report on Form 10-Q for the fiscal quarter ended April 30, 2008)
10.8*	Registrant’s 2006 Employee Stock Plan (incorporated by reference to Exhibit 10.2 filed with the Registrant’s Current Report on Form 8-K filed on November 15, 2005)
10.9*	Registrant’s 2006 Employee Stock Plan Forms of Agreement (incorporated by reference to Exhibit 10.8 filed with the Registrant’s Annual Report on Form 10-K for the fiscal year ended January 31, 2006 and Exhibit 10.1 filed with the Registrant’s Current Report on Form 8-K filed on June 20, 2007)
10.10*	Registrant’s 2008 Employee Stock Plan, as amended and restated (incorporated by reference to Exhibit 10.2 filed with the Registrant’s Quarterly Report on Form 10-Q for the fiscal quarter ended July 31, 2010)
10.11*	Registrant’s 2008 Employee Stock Plan Forms of Agreement (incorporated by reference to Exhibit 10.1 filed with the Registrant’s Quarterly Report on Form 10-Q for the fiscal quarter ended April 30, 2008)
10.12*	Registrant’s 2008 Employee Stock Plan Form of Agreement (incorporated by reference to Exhibit 10.1 filed with the Registrant’s Current Report on Form 8-K filed on February 6, 2009)
10.13*	Registrant’s 2008 Employee Stock Plan Forms of Restricted Stock Unit Agreements (incorporated by reference to Exhibit 10.2 filed with the Registrant’s Current Report on Form 8-K filed on June 18, 2008)
10.14*	Registrant’s 2008 Employee Stock Plan Forms of Agreement (non-U.S. Employees) (incorporated by reference to Exhibit 10.14 filed with the Registrant’s Annual Report on Form 10-K for the fiscal year ended January 31, 2009)

88

Exhibit No.	Description
10.15*	Registrant's 2012 Employee Stock Plan(incorporated by reference to Exhibit 10.1 filed with the Registrant's Current Report on Form 8-K filed on January 6, 2012)
10.16*	Registrant's 2012 Employee Stock Plan Form of Restricted Stock Unit Agreement (incorporated by reference to Exhibit 10.3 filed with the Registrant's Current Report on Form 8-K filed on March 13, 2012)
10.17*	Registrant's 2012 Employee Stock Plan Form of Stock Option Agreement (incorporated by reference to Exhibit 10.2 filed with the Registrant's Current Report on Form 8-K filed on March 13, 2012)
10.18*	Registrant's 2012 Employee Stock Plan Form of Stock Option Agreement (non-U.S. Employees) (incorporated by reference to Exhibit 10.4 filed with the Registrant's Current Report on Form 8-K filed on March 13, 2012)
10.19*	Text of amendment to certain stock option agreements (incorporated by reference to Exhibit 10.1 filed with the Registrant’s Current Report on Form 8-K filed on September 22, 2006)
10.20*	Amendments to certain stock option agreements (incorporated by reference to Exhibit 10.16 filed with the Registrant’s Annual Report on Form 10-K for the fiscal year ended January 31, 2009)
10.21*	Registrant’s 2010 Outside Directors’ Stock Plan (incorporated by reference to Exhibit 10.1 filed with the Registrant’s Current Report on Form 8-K filed on June 16, 2009)
10.22*	Autodesk, Inc. 2010 Outside Directors’ Stock Plan Form of Stock Option Agreement (incorporated by reference to Exhibit 10.1 filed with the Registrant’s Current Report on Form 8-K filed on March 31, 2010)
10.23*	Autodesk, Inc. 2010 Outside Directors’ Stock Plan Form of Restricted Stock Award Agreement (incorporated by reference to Exhibit 10.2 filed with the Registrant’s Current Report on Form 8-K filed on March 31, 2010)
10.24*	Registrant's 2012 Outside Directors' Stock Plan(incorporated by reference to Exhibit 10.2 filed with the Registrant's Current Report on Form 8-K filed on January 6, 2012)
10.25*	Registrant's 2012 Outside Directors' Stock Plan Form of Restricted Stock Unit Agreement (incorporated by reference to Exhibit 10.5 filed with the Registrant's Current Report on Form 8-K filed on March 13, 2012)
10.26*	Form of Promise to Make Cash Payment and Option Amendment (U.S. Employees) (incorporated by reference to Exhibit 99.1 filed with the Registrant’s Current Report on Form 8-K filed on July 27, 2007)
10.27*	Form of Promise to Make Cash Payment and Option Amendment (Canadian Employees) (incorporated by reference to Exhibit 99.2 filed with the Registrant’s Current Report on Form 8-K filed on July 27, 2007)
10.28*	Registrant’s Executive Incentive Plan, as amended and restated (incorporated by reference to Exhibit 10.1 filed with the Registrant’s Current Report on Form 8-K filed on June 14, 2010)
10.29*	Registrant’s 2005 Non-Qualified Deferred Compensation Plan, as amended and restated, effective as of January 1, 2008, as further amended and restated, effective as of December 31, 2008, as further amended and restated, effective as of January 1, 2010 (incorporated by reference to Exhibit 10.1 filed with the Registrant’s Quarterly Report on Form 10-Q for the fiscal quarter ended October 31, 2009)
10.30*	Participants, target awards and payout formulas for fiscal year 2012 under the Registrant’s Executive Incentive Plan (incorporated by reference to Item 5.02 of the Registrant’s Current Report on Form 8-K filed on March 29, 2011)
10.31*	Executive Change in Control Program, as amended and restated (incorporated by reference to Exhibit 10.1 filed with the Registrant’s Current report on Form 8-K filed on December 15, 2010)
10.32*	Description of annual cash compensation paid to non-employee directors (incorporated by reference to Item 1.01 of the Registrant’s Current Report on Form 8-K filed on June 14, 2006 and Item 5.02 of the Registrant’s Current Report on Form 8-K filed on March 18, 2009)
10.33*	Form of Indemnification Agreement executed by Autodesk and each of its officers and directors (incorporated by reference to Exhibit 10.8 filed with the Registrant’s Annual Report on Form 10-K for the fiscal year ended January 31, 2005)
10.34*	Second Amended and Restated Employment Agreement between Registrant and Carl Bass dated March 8, 2012 (incorporated by reference to Exhibit 10.1 filed with the Registrant’s Current Report on Form 8-K filed on March 13, 2012)
10.35*	Relocation Policy Addendum for Mark Hawkins (incorporated by reference to Exhibit 10.1 filed with the Registrant's Quarterly Report on Form 10-Q for the fiscal quarter ended October 21, 2011)

89

Exhibit No.	Description
10.36*	Registrant’s Equity Incentive Deferral Plan as amended and restated effective as of June 12, 2008 (incorporated by reference to Exhibit 10.4 filed with the Registrant’s Quarterly Report on Form 10-Q for the fiscal quarter ended July 31, 2008)
10.37*	Amendment to Registrant's Equity Incentive Deferral Plan effective as of February 17, 2012 (filed herewith)
10.38	Office Lease between Registrant and the J.H.S. Trust for 111 McInnis Parkway, San Rafael, CA, as amended (incorporated by reference to Exhibit 10.1 filed with the Registrant’s Quarterly Report on Form 10-Q for the fiscal quarter ended October 31, 2004)
10.39	Fourth Amendment to Lease between Registrant and the J.H.S. Holdings L.P. for 111 McInnis Parkway, San Rafael, CA (incorporated by reference to Exhibit 10.3 filed with the Registrant’s Annual Report on Form 10‑K for the fiscal year ended January 31, 2010)
10.40	Credit Agreement between Registrant and CITIBANK, N.A. dated as of May 26, 2011 (incorporated by reference to Exhibit 10.1 filed with the Registrant’s Current Report on Form 8-K filed on May 27, 2011)
21.1	List of Subsidiaries (filed herewith)
23.1	Consent of Independent Registered Public Accounting Firm (Ernst & Young LLP) (filed herewith)
24.1	Power of Attorney (contained in the signature page to this Annual Report)
31.1	Certification of Chief Executive Officer pursuant to Rule 13a-14(a) of the Securities Exchange Act of 1934 (filed herewith)
31.2	Certification of Chief Financial Officer pursuant to Rule 13a-14(a) of the Securities Exchange Act of 1934 (filed herewith)
32.1†	Certification of Chief Executive Officer and Chief Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002 (filed herewith)
101.INS ††	XBRL Instance Document
101.SCH ††	XBRL Taxonomy Extension Schema
101.CAL ††	XBRL Taxonomy Extension Calculation Linkbase
101.DEF ††	XBRL Taxonomy Extension Definition Linkbase
101.LAB ††	XBRL Taxonomy Extension Label Linkbase
101.PRE ††	XBRL Taxonomy Extension Presentation Linkbase

 ____________________

* Denotes a management contract or compensatory plan or arrangement.

† The certifications attached as Exhibit 32.1 that accompany this Annual Report on Form 10-K, are not deemed filed with the Securities and Exchange Commission and are not to be incorporated by reference into any filing of Autodesk, Inc. under the Securities Act of 1933, as amended, or the Securities Exchange Act of 1934, as amended, whether made before or after the date of this Form 10-K, irrespective of any general incorporation language contained in such filing.

†† The financial information contained in these XBRL documents is unaudited.    

90

EX-10.37

Exhibit 10.37

EXHIBIT A

AMENDMENT TO THE

AUTODESK, INC. EQUITY INCENTIVE DEFERRAL PLAN

This amendment (the "Amendment") to the Autodesk, Inc. Equity Incentive Deferral Plan (the "Plan"), is made and entered into effective as of February 17, 2012. Capitalized terms used and not otherwise defined herein shall have the meanings ascribed to such terms in the Plan.

RECITALS

WHEREAS, the Compensation Committee of the Board of Directors of Autodesk, Inc. desires to amend the Plan;

NOW, THEREFORE, the Plan shall be amended as follows:

1.Amendment to Preamble

The final two sentences of the second paragraph of the preamble to the Plan are hereby amended to read as follows:

Any Restricted Stock Units (or RSUs) awarded pursuant to the Deferral Plan shall be granted under the Company's 2008 Employee Stock Plan, 2012 Employee Stock Plan, or any other equity compensation plan approved by the Company's Stockholders (the plan covering any given RSU being referred to herein as the "Plan" with respect to such RSU).  Capitalized terms not otherwise defined in the Deferral Plan shall have the meanings given to them in the Plan.

2.Effect on the Plan. Except as specifically amended by this Amendment, the Plan shall remain in full force and effect.

3.Headings. Headings to sections herein are inserted for convenience of reference only and shall not be deemed to be a part of or to affect the meaning or interpretation of this Amendment.

4.Governing Law. This Amendment shall be governed by and construed according to the laws of the State of California without regard to its principles of conflict of laws.

IN WITNESS WHEREOF, the Company has caused this Amendment be executed as of the date first above written.

COMPANY

By:     /s/   RICHARD FOEHR        

Name:Richard Foehr

Title:Vice President, Assistant General

Counsel and Assistant Secretary

EX-21.1

Exhibit 21.1

SUBSIDIARIES OF AUTODESK, INC.,

a Delaware Corporation

as of January 31, 2012

Subsidiary Name	Jurisdiction of Incorporation
ADSK Canada Inc.	Canada (Ontario)
ADSK Ireland Limited	Ireland
Alias Systems Limited *	United Kingdom
Autodesk	France
Autodesk (EMEA) Sàrl	Switzerland
Autodesk AB	Sweden
Autodesk Asia Pte Ltd.	Singapore
Autodesk Australia Pty Ltd.	Australia
Autodesk B.V.	The Netherlands
Autodesk Canada Co.	Canada (Nova Scotia)
Autodesk de Argentina S.A.	Argentina
Autodesk de Mexico, S.A. de C.V.	Mexico
Autodesk de Venezuela, S.A.	Venezuela
Autodesk Design Software (Shanghai) Co., Ltd.	China
Autodesk Development B.V.	The Netherlands
Autodesk Development Sàrl	Switzerland
Autodesk do Brasil Ltda	Brazil
Autodesk Far East Ltd.	Hong Kong
Autodesk Ges.mbH	Austria
Autodesk GmbH	Germany
Autodesk Hungary Kft	Hungary
Autodesk India Private Limited	India
Autodesk International Holding Co.	U.S. (Delaware)
Autodesk Israel Ltd.	Israel
Autodesk Korea Ltd.	South Korea
Autodesk Limited	United Kingdom
Autodesk Limited	Saudi Arabia
Autodesk Ltd. Japan	Japan
Autodesk SA	Switzerland
Autodesk S.r.l.	Italy
Autodesk Software (China) Co., Ltd.	China
Autodesk Software, Unipessoal, Lda.	Portugal
Autodesk Sp. z.o.o.	Poland
Autodesk Spol. S.R.O.	Czech Republic
Autodesk Strategies Ltd.	China
Autodesk Taiwan Limited	Taiwan
Autodesk Yazilim Hizmetleri Ticaret Limited Sirketi (Autodesk Limited Sirketi)	Turkey
Autodesk, S.A.	Spain
Blue Ridge Numerics, Inc.	U.S. (Virginia)
Blue Ridge Numerics Limited	United Kingdom

Subsidiary Name	Jurisdiction of Incorporation
Cfdesign Software India Private Limited	India
Code Mine in Stockholm AB	Sweden
Hanna Strategies Holdings, Inc. *	U.S. (Delaware)
Hanna Technologies Private Ltd. *	India
Horizontal Systems, Inc.	U.S. (Delaware)
Instructables, Inc.	U.S. (Delaware)
Limited Liability Company Autodesk (CIS)	Russia
Micro Application Packages Limited	United Kingdom
Moldflow (Europe) Ltd. *	United Kingdom
Moldflow B.V.	The Netherlands
Moldflow Iberia S.L. *	Spain
Moldflow International Pty Ltd. *	Australia
Moldflow Netherlands Limited	Ireland
Moldflow Pty Ltd. *	Australia
Moldflow Singapore Pte Ltd*	Singapore
NavisWorks Limited *	United Kingdom
NavisWorks (UK) Limited *	United Kingdom
Robobat (UK) Limited *	United Kingdom
Scaleform Corporation *	U.S. (Delaware)
SCI Topole	France

* inactive subsidiaries / subsidiaries scheduled to be wound up

EX-23.1

Exhibit 23.1

CONSENT OF ERNST & YOUNG LLP,

INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

We consent to the incorporation by reference in the following Registration Statements:

Form S-8	33-39458	1996 Stock Plan
Form S-8	33-51110	Nonstatutory Stock Option Plan
Form S-8	333-08693	1996 Stock Plan, 1990 Directors' Option Plan, 1998 Employee Qualified Stock Purchase Plan and Teleos Research 1996 Stock Plan
Form S-8	333-15037	Nonstatutory Stock Option Plan
Form S-8	333-62655	1996 Stock Plan and 1998 Employee Qualified Stock Purchase Plan
Form S-8	333-81207	1996 Stock Plan, 1998 Employee Qualified Stock Purchase Plan and Nonstatutory Stock Option Plan
Form S-8	333-92539	Nonstatutory Stock Option Plan
Form S-8	333-45928	1996 Stock Plan, 2000 Directors' Option Plan and 1998 Employee Qualified Stock Purchase Plan
Form S-8	333-67974	1996 Stock Plan, 1998 Employee Qualified Stock Purchase Plan and Nonstatutory Stock Option Plan
Form S-8	333-88682	Revit Technology Corporation 1998 Stock Plan, 1996 Stock Plan and 1998 Employee Qualified Stock Purchase Plan
Form S-8	333-106556	1996 Stock Plan and 1998 Employee Qualified Stock Purchase Plan
Form S-8	333-116203	1996 Stock Plan and 1998 Employee Qualified Stock Purchase Plan
Form S-8	333-133015	Emerging Solutions, Inc. 1999 Equity Ownership Plan
Form S-8	333-134560	Autodesk, Inc. 2006 Employee Stock Plan, Autodesk, Inc. 2000 Directors' Option Plan, Autodesk, Inc. 1998 Employee Qualified Stock Purchase Plan, and Alias Systems Holdings Inc. 2004 Stock Option Plan
Form S-8	333-149964	Autodesk, Inc. 2008 Employee Stock Plan, Autodesk, Inc. 1998 Employee Qualified Stock Purchase Plan
Form S-8	333-153372	Autodesk, Inc. 2000 Directors' Option Plan
Form S-8	333-158131	Autodesk, Inc. 1998 Employee Qualified Stock Purchase Plan
Form S-8	333-165561	Autodesk, Inc. 1998 Employee Qualified Stock Purchase Plan and Autodesk, Inc. 2010 Outside Directors' Stock Plan
Form S-8	333-169137	Autodesk, Inc. 2008 Employee Stock Plan, As Amended and Restated
Form S-8	333-172936	Autodesk, Inc. 1998 Employee Qualified Stock Purchase Plan
Form S-8	333-179514	Autodesk, Inc. 1998 Employee Qualified Stock Purchase Plan, Autodesk, Inc. 2012 Employee Stock Plan and Autodesk, Inc. 2012 Outside Directors' Stock Plan

of our reports dated March 15, 2012, with respect to the consolidated financial statements and schedule of Autodesk, Inc., and the effectiveness of internal control over financial reporting of Autodesk, Inc., included in this Annual Report (Form 10-K) of Autodesk, Inc. for the year ended January 31, 2012.

/s/ ERNST & YOUNG LLP

San Francisco, California

March 15, 2012

EX-31.1

Exhibit 31.1

CERTIFICATIONS

I, Carl Bass, certify that:

1. I have reviewed this report on Form 10-K of Autodesk, Inc.;

2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

4. The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

a) Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

b) Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

c) Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

d) Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

5. The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):

a) All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and

b) Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.

/s/ CARL BASS

Carl Bass

President and Chief Executive Officer

(Principal Executive Officer)

Date: March 15, 2012

EX-31.2

Exhibit 31.2

CERTIFICATIONS

I, Mark J. Hawkins, certify that:

1. I have reviewed this report on Form 10-K of Autodesk, Inc.;

2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

4. The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

a) Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

b) Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

c) Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

d) Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

5. The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):

a) All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and

b) Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.

/s/ MARK J. HAWKINS

Mark J. Hawkins

Executive Vice President and Chief Financial Officer

(Principal Financial Officer)

Date: March 15, 2012

EX-32.1

Exhibit 32.1

CERTIFICATION OF CHIEF EXECUTIVE OFFICER AND CHIEF FINANCIAL OFFICER

PURSUANT TO

18 U.S.C. SECTION 1350,

AS ADOPTED PURSUANT TO

SECTION 906 OF THE SARBANES-OXLEY ACT OF 2002

Based on my knowledge, I, Carl Bass, certify, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that the Annual Report of Autodesk, Inc. on Form 10-K for the annual period ended January 31, 2012 fully complies with the requirements of Section 13(a) or 15(d) of the Securities Exchange Act of 1934 and that information contained in such Form 10-K fairly presents in all material respects the financial condition and results of operations of Autodesk, Inc.

/s/ CARL BASS

Carl Bass

President and Chief Executive Officer
(Principal Executive Officer)

March 15, 2012

Based on my knowledge, I, Mark J. Hawkins, certify, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that the Annual Report of Autodesk, Inc. on Form 10-K for the annual period ended January 31, 2012 fully complies with the requirements of Section 13(a) or 15(d) of the Securities Exchange Act of 1934 and that information contained in such Form 10-K fairly presents in all material respects the financial condition and results of operations of Autodesk, Inc.

/s/ MARK J. HAWKINS

Mark J. Hawkins

Executive Vice President and Chief Financial Officer

(Principal Financial Officer)

March 15, 2012

XML

Business and Summary of Significant Accounting Policies Computer Equipment, Software, Furniture, Leasehold Improvements and the Related Accumulated Depriciaation (Details) (USD $) In Millions, unless otherwise specified	Jan. 31, 2012	Jan. 31, 2011
Property, Plant and Equipment [Line Items]
Computer software, at cost	$ 133.5	$ 129.4
Computer hardware, at cost	153.3	123.7
Leasehold improvements, land and buildings, at cost	139.5	121.3
Furniture and equipment, at cost	47.7	43.6
Property, Plant and Equipment, Gross	474.0	418.0
Less: Accumulated depreciation	(369.5)	(333.5)
Computer software, hardware, leasehold improvements, furniture and equipment, net	$ 104.5	$ 84.5

XML

Intrinsic Value of Options Exercised and Weighted Average Grant Date Fair Value of Stock Options Granted (Detail) (USD $) In Millions, except Per Share data, unless otherwise specified	12 Months Ended
	Jan. 31, 2012		Jan. 31, 2011		Jan. 31, 2010
Share-based Compensation Arrangement by Share-based Payment Award [Line Items]
Intrinsic value of options exercised	$ 85.7	[1]	$ 61.9	[1]	$ 18.8	[1]
Weighted average grant date fair value per share of stock options granted	$ 14.04	[2]	$ 9.30	[2]	$ 6.13	[2]

[1] The intrinsic value of options exercised is calculated as the difference between the exercise price of the option and the market value of the stock on the date of exercise.

[2] The weighted average grant date fair value per share of stock options granted is calculated, as of the stock option grant date, using the BSM option pricing model.

XML

Contractual Maturities of Types of Securities (Detail) (USD $) In Millions, unless otherwise specified	Jan. 31, 2012
Cost
Due in less than 1 year	$ 222.8
Due in 1 year through 5 years	205.7
Due in 5 years through 10 years	0
Due after 10 years	4.2
Total	432.7
Fair Value
Due in less than 1 year	222.9
Due in 1 year through 5 years	206.9
Due in 5 years through 10 years	0
Due after 10 years	4.2
Total	$ 434.0

XML

Stockholders Equity Stockholders' Equity (Details) (USD $) In Millions, except Per Share data, unless otherwise specified	12 Months Ended
	Jan. 31, 2012	Jan. 31, 2011	Jan. 31, 2010
Stockholders Equity Note [Line Items]
Preferred stock, shares authorized	2.0	2.0
Repurchase and retirement of common shares (in shares)	9.7	9.0	2.7
Common Stock Repurchase Program
Stockholders Equity Note [Line Items]
Repurchased shares of its common stock on the open market, average repurchase price per share	33.71	31.13	23.63
Common Stock shares remained available for repurchase under repurchase plans	14.7
Common Stock [Member]
Stockholders Equity Note [Line Items]
Repurchase and retirement of common shares (in shares)	9.7	9.0	2.7
Repurchased shares of its common stock on the open market, value	211.0	138.3	36.4
Retained Earnings [Member]
Stockholders Equity Note [Line Items]
Repurchased shares of its common stock on the open market, value	116.4	142.0	26.8

XML

Options Outstanding and Exercisable (Detail) (USD $) In Millions, except Per Share data, unless otherwise specified	Jan. 31, 2012 Year		Jan. 31, 2011
Share-based Compensation Arrangement by Share-based Payment Award [Line Items]
Options Exercisable - Number of Shares	16.7
Options Exercisable - Weighted average contractual life (in years)	2.1
Options Exercisable - Weighted average exercise price	$ 30.98
Options Exercisable - Aggregate intrinsic value	$ 127.7
Options Outstanding - Number of Shares	28.4		30.4
Options Outstanding - Weighted average contractual life (in years)	4.0
Options Outstanding - Weighted average exercise price	$ 31.39		$ 28.93
Options Outstanding - Aggregate intrinsic value	$ 201.3	[1]
Range 1
Share-based Compensation Arrangement by Share-based Payment Award [Line Items]
Range of per-share exercise prices, Lower Limit	$ 2.28
Range of per-share exercise prices, Upper Limit	$ 17.37
Options Exercisable - Number of Shares	3.8
Options Exercisable - Weighted average exercise price	$ 12.94
Options Outstanding - Number of Shares	5.8
Options Outstanding - Weighted average exercise price	$ 13.61
Range 2
Share-based Compensation Arrangement by Share-based Payment Award [Line Items]
Range of per-share exercise prices, Lower Limit	$ 17.39
Range of per-share exercise prices, Upper Limit	$ 29.49
Options Exercisable - Number of Shares	2.6
Options Exercisable - Weighted average exercise price	$ 25.81
Options Outstanding - Number of Shares	6.1
Options Outstanding - Weighted average exercise price	$ 27.64
Range 3
Share-based Compensation Arrangement by Share-based Payment Award [Line Items]
Range of per-share exercise prices, Lower Limit	$ 29.50
Range of per-share exercise prices, Upper Limit	$ 37.16
Options Exercisable - Number of Shares	4.4
Options Exercisable - Weighted average exercise price	$ 32.94
Options Outstanding - Number of Shares	6.0
Options Outstanding - Weighted average exercise price	$ 32.72
Range 4
Share-based Compensation Arrangement by Share-based Payment Award [Line Items]
Range of per-share exercise prices, Lower Limit	$ 37.26
Range of per-share exercise prices, Upper Limit	$ 41.62
Options Exercisable - Number of Shares	2.0
Options Exercisable - Weighted average exercise price	$ 38.40
Options Outstanding - Number of Shares	5.9
Options Outstanding - Weighted average exercise price	$ 40.46
Range 5
Share-based Compensation Arrangement by Share-based Payment Award [Line Items]
Range of per-share exercise prices, Lower Limit	$ 42.01
Range of per-share exercise prices, Upper Limit	$ 49.80
Options Exercisable - Number of Shares	3.9
Options Exercisable - Weighted average exercise price	$ 45.69
Options Outstanding - Number of Shares	4.6
Options Outstanding - Weighted average exercise price	$ 45.42

[1] Represents the total intrinsic value, based on Autodesk’s closing stock price of $36.00 per share as of January 31, 2012, which would have been received by the option holders had all option holders exercised their options as of that date.

XML

Restructuring Reserve (Detail)	3 Months Ended
	Apr. 30, 2011 RestructuringFiscal2011Plan	Jul. 31, 2009 RestructuringFiscal2010Plan	Jan. 31, 2009 RestructuringFiscal2009Plan
Restructuring Cost and Reserve
Restructuring program, reduced the number of employees	200	430	700
Leased facilities that were consolidated	0	32	27

XML

Business and Summary of Significant Accounting Policies Business and Summary of Significant Accounting Policies Additional Information (Details) (USD $) In Millions, unless otherwise specified	12 Months Ended
	Jan. 31, 2012	Jan. 31, 2011	Jan. 31, 2010
Organization, Consolidation and Presentation of Financial Statements Disclosure [Line Items]
Line of Credit Facility, Maximum Borrowing Capacity	$ 400.0
Total sales to the distributors Tech Data Corporation and its global affiliates ("Tech Data") relative to Autodesk's consolidated net revenue	17.00%	16.00%	14.00%
Concentration Risk, Percentage	21.00%	22.00%	21.00%
Depreciation, Nonproduction	43.7	47.6	50.4
Finite-Lived Intangible Assets, Useful Life, Minimum	2
Finite-Lived Intangible Assets, Useful Life, Maximum	7
Finite-Lived Intangible Assets, Amortization Expense	71.8	57.8	61.2
Cumulative error from the understatement of stock-based compensation, net of tax effects			6.8
Advertising Expense	21.3	18.8	18.4
Purchased Technologies, Customer Relationships and Trade Names
Organization, Consolidation and Presentation of Financial Statements Disclosure [Line Items]
Acquired Finite-lived Intangible Asset, Weighted Average Useful Life	5.4
Cost of Sales
Organization, Consolidation and Presentation of Financial Statements Disclosure [Line Items]
Cumulative error from the understatement of stock-based compensation, net of tax effects			0.4
Selling and Marketing Expense
Organization, Consolidation and Presentation of Financial Statements Disclosure [Line Items]
Cumulative error from the understatement of stock-based compensation, net of tax effects			4.4
Other Research and Development Expense
Organization, Consolidation and Presentation of Financial Statements Disclosure [Line Items]
Cumulative error from the understatement of stock-based compensation, net of tax effects			2.9
General and Administrative Expense
Organization, Consolidation and Presentation of Financial Statements Disclosure [Line Items]
Cumulative error from the understatement of stock-based compensation, net of tax effects			2.1
Reduction in Taxes
Organization, Consolidation and Presentation of Financial Statements Disclosure [Line Items]
Cumulative error from the understatement of stock-based compensation, net of tax effects			3.0
Accounts Receivable
Organization, Consolidation and Presentation of Financial Statements Disclosure [Line Items]
Concentration Risk, Percentage	21.00%	16.00%
Media and Entertainment
Organization, Consolidation and Presentation of Financial Statements Disclosure [Line Items]
Goodwill, Impairment Loss			$ 21.0

XML

Net Income Per Share (Tables)

12 Months Ended

Jan. 31, 2012

Schedule of Calculation of Numerator and Denominator in Earnings Per Share

The following table sets forth the computation of the numerators and denominators used in the basic and diluted net income per share amounts:

	Fiscal Year Ended January 31,
	2012		2011		2010
Numerator:
Net income	$	285.3	$	212.0	$	58.0
Denominator:
Denominator for basic net income per share—weighted average shares	227.7		227.6		228.7
Effect of dilutive securities	5.6		6.6		3.4
Denominator for dilutive net income per share	233.3		234.2		232.1
Basic net income per share	$	1.25	$	0.93	$	0.25
Diluted net income per share	$	1.22	$	0.90	$	0.25

XML

Restructuring Reserve Restructuring Activities (Details) (USD $) In Millions, unless otherwise specified	12 Months Ended
	Jan. 31, 2012		Jan. 31, 2011		Jan. 31, 2010
Beginning Balance	$ 8.6		$ 19.4
Additions	0		13.7
Payments	(4.3)		(21.0)
Adjustments	(1.9)	[1]	(3.5)	[1]
Ending Balance	2.4		8.6
Current portion At January 31, 2012	1.1	[2]	4.8	[2]	11.4	[2]
Non-current portion At January 31, 2012	1.3	[2]	3.8	[2]	8.0	[2]
Employee Severance | RestructuringFiscal2011Plan
Beginning Balance	1.5		0
Additions	0		12.4
Payments	(1.5)		(10.6)
Adjustments	0	[1]	(0.3)	[1]
Ending Balance	0		1.5
Employee Severance | RestructuringFiscal2010Plan
Beginning Balance	0		0.8
Additions	0		0
Payments			(0.8)
Adjustments		[1]	0	[1]
Ending Balance	0		0
Employee Severance | RestructuringFiscal2009Plan
Beginning Balance	0		1.0
Additions	0		0
Payments	0		(0.2)
Adjustments	0	[1]	(0.8)	[1]
Ending Balance	0		0
Employee Severance | Otherrestructuring [Member]
Beginning Balance	0		0.4
Additions	0		0
Payments	0		(0.3)
Adjustments	0	[1]	(0.1)	[1]
Ending Balance	0		0
Lease Termination | RestructuringFiscal2010Plan
Beginning Balance	1.7		6.1
Additions	0		0.3
Payments	(1.1)		(4.3)
Adjustments	(0.3)	[1]	(0.4)	[1]
Ending Balance	0.3		1.7
Lease Termination | RestructuringFiscal2009Plan
Beginning Balance	2.8		8.2
Additions	0		1.0
Payments	(0.9)		(4.6)
Adjustments	(1.3)	[1]	(1.8)	[1]
Ending Balance	0.6		2.8
Lease Termination | Otherrestructuring [Member]
Beginning Balance	2.6		2.9
Additions	0		0
Payments	(0.8)		(0.2)
Adjustments	(0.3)	[1]	(0.1)	[1]
Ending Balance	$ 1.5		$ 2.6

[1] Adjustments include the impact of foreign currency translation.

[2] The current and non-current portions of the reserve are recorded in the Consolidated Balance Sheets under “Other accrued liabilities” and “Other liabilities,” respectively.

XML

Net Income Per Share - Additional Information (Detail) In Millions, unless otherwise specified	12 Months Ended
	Jan. 31, 2012	Jan. 31, 2011	Jan. 31, 2010
Earnings Per Share Disclosure [Line Items]
Potentially dilutive shares excluded from the computation of diluted net income per share	12.9	19.3	21.3

XML

Stock-Based Compensation Expense - Additional Information (Detail) (USD $)	12 Months Ended
	Jan. 31, 2012		Jan. 31, 2011		Jan. 31, 2010
Compensation Related Costs Share Based Payments Disclosure [Line Items]
Share based compensation arrangement by share based payment award options expiration term	8
Share-Based Compensation Shares Granted to Share Issued	$ 2.11
Option expiration term (in years)	8
Share-based Compensation Arrangement by Share-based Payment Award, Options, Vested and Expected to Vest, Outstanding, Weighted Average Remaining Contractual Term	3.9
Share-based Compensation Arrangement by Share-based Payment Award, Options, Vested and Expected to Vest, Outstanding, Aggregate Intrinsic Value	$ 199,300,000
Total compensation costs related to non-vested options	74,900,000
Total compensation costs related to non-vested options, expected to be recognized over a weighted average period (in years)	1.7
Sale of Stock, Price Per Share	$ 36.00
Percentage of compensation that eligible employees can use to purchase common stock, maximum	15.00%
Percentage of fair market value eligible employees can purchase common stock, minimum	85.00%
Shares available for future issuance, increases on the first trading day of each fiscal year	10,000,000
Shares available for future issuance, percentage of outstanding shares plus any shares repurchased by Autodesk	2.00%
Weighted average grant date fair value	$ 14.04	[1]	$ 9.30	[1]	$ 6.13	[1]
Restricted Stock Units (RSUs)
Compensation Related Costs Share Based Payments Disclosure [Line Items]
Restricted stock granted	1,594,500
Compensation expense	29,100,000		8,900,000
Total compensation cost related to non-vested awards not yet recognized	47,700,000
Total compensation cost related to non-vested awards not yet recognized, weighted average period of recognition (in years)	1.6
Number of restricted stock granted but unreleased	2,170,600
Restricted Stock Awards
Compensation Related Costs Share Based Payments Disclosure [Line Items]
Restricted stock granted	16,000
Compensation expense	600,000		700,000
Total compensation cost related to non-vested awards not yet recognized	200,000
Total compensation cost related to non-vested awards not yet recognized, weighted average period of recognition (in years)	0.4
Number of restricted stock granted but unreleased	13,500
Employee Stock Plan 2012
Compensation Related Costs Share Based Payments Disclosure [Line Items]
Shares of common stock reserved for issuance	21,200,000
Stock Issued During Period, Shares, Restricted Stock Award, Net of Forfeitures	15,200,000
Stock Issued During Period, Shares, Share-based Compensation, Forfeited	6,000,000
Share-Based Compensation Shares Granted to Share Issued	$ 1.79
Maximum vesting period of options and restricted stock granted	over a four year period
Shares available for future issuance	15,400,000
Employee Stock Plan 2012 | Minimum
Compensation Related Costs Share Based Payments Disclosure [Line Items]
Share based compensation arrangement by share based payment award options expiration term	4
Option expiration term (in years)	4
Employee Stock Plan 2012 | Maximum
Compensation Related Costs Share Based Payments Disclosure [Line Items]
Share based compensation arrangement by share based payment award options expiration term	10
Option expiration term (in years)	10
Outside directors stock plan 2012
Compensation Related Costs Share Based Payments Disclosure [Line Items]
Share based compensation arrangement by share based payment award options expiration term	7
Shares of common stock reserved for issuance	2,600,000
Maximum vesting period of options and restricted stock granted	over a four year period
Option expiration term (in years)	7
Shares available for future issuance	2,600,000
Minimum vesting period of options and restricted stock granted	one year
ESP Plan
Compensation Related Costs Share Based Payments Disclosure [Line Items]
Shares available for future issuance	29,700,000
Shares issued under the ESP Plan	2,800,000		3,200,000		3,100,000
Shares issued under the ESP Plan, average price	$ 18.26		$ 14.77		$ 14.41
Weighted average grant date fair value	$ 9.95		$ 10.11		$ 7.19
Employee Service Share Based Compensation recognized Compensation Costs On Nonvested Restricted Shares	$ 23,800,000		$ 18,200,000		$ 26,600,000

[1] The weighted average grant date fair value per share of stock options granted is calculated, as of the stock option grant date, using the BSM option pricing model.

XML

Segments Information regarding operations by geographic area (Details) (USD $) In Millions, unless otherwise specified	3 Months Ended										12 Months Ended
	Jan. 31, 2012		Oct. 31, 2011	Jul. 31, 2011	Apr. 30, 2011	Jan. 31, 2011		Oct. 31, 2010	Jul. 31, 2010	Apr. 30, 2010	Jan. 31, 2012		Jan. 31, 2011		Jan. 31, 2010
Revenue, Net	$ 592.4		$ 548.6	$ 546.3	$ 528.3	$ 527.7		$ 476.7	$ 472.8	$ 474.6	$ 2,215.6		$ 1,951.8		$ 1,713.7
Long-Lived Assets	1,003.3	[1]				790.0	[1]				1,003.3	[1]	790.0	[1]
Total Americas
Revenue, Net											798.5		701.5		654.4
Long-Lived Assets	831.7	[1]				636.8	[1]				831.7	[1]	636.8	[1]
Total Americas | U.S.
Revenue, Net											631.0		561.6		527.5
Long-Lived Assets	792.5	[1]				571.2	[1]				792.5	[1]	571.2	[1]
Total Americas | Other Americas
Revenue, Net											167.5		139.9		126.9
Long-Lived Assets	39.2	[1]				65.6	[1]				39.2	[1]	65.6	[1]
Europe Middle East And Africa
Revenue, Net											862.2		782.8		671.1
Disclosure on Geographic Areas, Long-Lived Assets in Foreign Countries	121.1	[1]				111.3	[1]				121.1	[1]	111.3	[1]
Europe Middle East And Africa | SWITZERLAND
Disclosure on Geographic Areas, Long-Lived Assets in Foreign Countries	37.7	[1]				42.8	[1]				37.7	[1]	42.8	[1]
Europe Middle East And Africa | Other Europe, Middle East and Africa [Domain]
Disclosure on Geographic Areas, Long-Lived Assets in Foreign Countries	83.4	[1]				68.5	[1]				83.4	[1]	68.5	[1]
Asia [Member]
Revenue, Net											554.9		467.5		388.2
Disclosure on Geographic Areas, Long-Lived Assets in Foreign Countries	50.5	[1]				41.9	[1]				50.5	[1]	41.9	[1]
Asia [Member] | JAPAN
Revenue, Net											240.5		200.6		171.1
Asia [Member] | Other Asia Pacific
Revenue, Net											$ 314.4		$ 266.9		$ 217.1

[1] Long-lived assets exclude investments in subsidiaries, deferred tax assets and marketable securities.

XML

SCHEDULE II (Details) (USD $) In Millions, unless otherwise specified	12 Months Ended
	Jan. 31, 2012	Jan. 31, 2011	Jan. 31, 2010
Allowance for Doubtful Accounts
Balance at the Beginning of Year	$ 4.2	$ 4.6	$ 8.6
Valuation Allowances and Reserves, Charged to Cost and Expense	2.4	(0.3)	1.7
Deductions and Write-Offs	1.1	0.1	5.7
Balance at End of Year	5.5	4.2	4.6
Allowance for Sales Returns
Balance at the Beginning of Year	10.6	11.8	12.5
Valuation Allowances and Reserves, Charged to Cost and Expense	32.7	38.9	42.9
Deductions and Write-Offs	37.5	40.1	43.6
Balance at End of Year	5.8	10.6	11.8
Business Restructuring Reserves
Balance at the Beginning of Year	8.6	19.4	43.9
Valuation Allowances and Reserves, Charged to Cost and Expense	0	13.7	48.9
Deductions and Write-Offs	6.2	24.5	73.4
Balance at End of Year	$ 2.4	$ 8.6	$ 19.4

XML

Retirement Benefit Plans (Details) (USD $) In Millions, unless otherwise specified	12 Months Ended
	Jan. 31, 2012	Jan. 31, 2011	Jan. 31, 2010
Defined Contribution Plan - Savings
Pension and Other Postretirement Benefits Disclosure [Line Items]
Defined Contribution Plan, Maximum Annual Contribution Per Employee, Percent	50.00%
Defined Contribution Plan, Cost Recognized	$ 7.3	$ 6.7	$ 7.1
Foreign Pension Plans, Defined Benefit
Pension and Other Postretirement Benefits Disclosure [Line Items]
Net Liability related to the funded status of defined benefit pension plans	18.0	18.2
Defined Benefit pension Plans, projected benefit obligation	52.8	47.3
Defined Benefit Plan, Fair Value of Plan Assets	34.8	29.1
Company's Contributioin To Plan	4.2	3.5	3.4
Defined benefit pension plans, estimated future benefit payments from fiscal 2013 through 2017	10.2
Defined benefit pension plans, estimated future benefit payments from fiscal 2018 through 2022	7.9
Unfunded Defined Benefit Plan
Pension and Other Postretirement Benefits Disclosure [Line Items]
Unrealized changes in the unfunded portion of defined benefit plans	8.2	9.8
Foreign Pension Plans Defined Contribution
Pension and Other Postretirement Benefits Disclosure [Line Items]
Company's Contributioin To Plan	$ 20.4	$ 13.6	$ 13.4

XML

Interest And Other Income, net (Details) (USD $) In Millions, unless otherwise specified	12 Months Ended
	Jan. 31, 2012	Jan. 31, 2011	Jan. 31, 2010
Component of Other Income, Nonoperating [Line Items]
Interest and investment income, net	$ 5.7	$ 10.9	$ 10.0
Gain (Loss) on foreign currency	(1.1)	(14.0)	5.0
Other Income	2.7	3.7	4.1
Interest and other income, net	$ 7.3	$ 0.6	$ 19.1

XML

Business and Summary of Significant Accounting Policies (Tables)

12 Months Ended

Jan. 31, 2012

Business and Summary of Significant Accounting Policies [Abstract]

Schedule of Accounts, Notes, Loans and Financing Receivable

Accounts receivable, net, consisted of the following as of January 31:

	2012			2011
Trade accounts receivable	$	433.9		$	363.0
Less: Allowance for doubtful accounts	(5.5		)	(4.2		)
Product returns reserve	(5.8		)	(10.6		)
Partner programs and other obligations	(27.5		)	(29.8		)
Accounts receivable, net	$	395.1		$	318.4

Concentration Risk Disclosure

Geographical concentrations of consolidated cash, cash equivalents and marketable securities held by Autodesk as of January 31:

	2012		2011
United States	11	%	14	%
Other Americas	1	%	1	%
Europe, Middle East and Africa (“EMEA”)	51	%	49	%
Asia Pacific (“APAC”)	37	%	36	%

Property, Plant and Equipment

Computer equipment, software, furniture, leasehold improvements and the related accumulated depreciation at January 31 were as follows:

	2012			2011
Computer software, at cost	$	133.5		$	129.4
Computer hardware, at cost	153.3			123.7
Leasehold improvements, land and buildings, at cost	139.5			121.3
Furniture and equipment, at cost	47.7			43.6
	474.0			418.0
Less: Accumulated depreciation	(369.5		)	(333.5		)
Computer software, hardware, leasehold improvements, furniture and equipment, net	$	104.5		$	84.5

Schedule of Finite-Lived Intangible Assets by Major Class

Other intangible assets and related accumulated amortization at January 31 were as follows:

	2012			2011
Purchased technologies, at cost(1)	$	378.7		$	313.1
Customer relationships, trade names, patents, and user lists, at cost(2)	215.3			179.1
	594.0			492.2
Less: Accumulated amortization	(445.2		)	(373.4		)
Other intangible assets, net	$	148.8		$	118.8

____________________ 

(1) Purchased technologies include $1.2 million and zero of in-process research and development technology as of January 31, 2012 and January 31, 2011, respectively. In-process research and development is an indefinite lived asset that is held and tested at least annually for impairment until such time that it becomes fully developed technology. Once development is completed, the technology is amortized to expense over an applicable useful life.

(2) Included as a net balance in “Other assets” in the Consolidated Balance Sheet. Customer relationships and trade names include the effects of foreign currency translation.

Schedule of Expected Amortization Expense

Expected future amortization expense for purchased technologies, customer relationships and trade names for each of the fiscal years ended thereafter is as follows:

	Year ending January 31,
2013	$	65.7
2014	47.1
2015	25.5
2016	7.9
2017	1.0
Thereafter	1.6
Total	$	148.8

Schedule of Goodwill

The change in the carrying amount of goodwill during the year ended January 31, 2012 is as follows:

	Platform Solutions and Emerging Business			Architecture, Engineering and Construction			Manufacturing		Media and Entertainment			Total
Balance as of January 31, 2011
Goodwill	$	45.3		$	224.2		$	279.1	$	154.7		$	703.3
Accumulated impairment losses	—			—			—		(149.2		)	(149.2		)
	45.3			224.2			279.1		5.5			554.1
Scaleform acquisition	—			—			—		22.6			22.6
Blue Ridge acquisition	—			—			22.3		—			22.3
Instructables acquisition	24.4			—			—		—			24.4
Micro Application Packages Limited acquisition	—			12.7			—		—			12.7
T-Splines acquisition	—			—			19.8		—			19.8
Goodwill acquired from other acquisitions	7.6			12.0			2.0		6.7			28.3
Effect of foreign currency translation, purchase accounting adjustments and other	(0.7		)	(1.2		)	0.1		—			(1.8		)
Balance as of January 31, 2012
Goodwill	76.6			247.7			323.3		184.0			831.6
Accumulated impairment losses	—			—			—		(149.2		)	(149.2		)
	$	76.6		$	247.7		$	323.3	$	34.8		$	682.4

The change in the carrying amount of goodwill during the year ended January 31, 2011 is as follows:

	Platform Solutions and Emerging Business		Architecture, Engineering and Construction			Manufacturing		Media and Entertainment			Total
Balance as of January 31, 2010
Goodwill	$	40.2	$	224.8		$	277.9	$	149.2		$	692.1
Accumulated impairment losses	—		—			—		(149.2		)	(149.2		)
	40.2		224.8			277.9		—			542.9
Goodwill acquired during the year	4.6		—			—		5.5			10.1
Effect of foreign currency translation, purchase accounting adjustments and other	0.5		(0.6		)	1.2		—			1.1
Balance as of January 31, 2011
Goodwill	45.3		224.2			279.1		154.7			703.3
Accumulated impairment losses	—		—			—		(149.2		)	(149.2		)
	$	45.3	$	224.2		$	279.1	$	5.5		$	554.1

Schedule of Employee Service Share-based Compensation, Allocation of Recognized Period Costs

The following table summarizes stock-based compensation expense for fiscal 2012, 2011 and 2010, respectively, as follows:

	Fiscal Year Ended January 31,
	2012			2011			2010
Cost of license and other revenue	$	3.9		$	2.9		$	3.1
Marketing and sales	48.3			35.5			41.1
Research and development	38.1			27.4			30.0
General and administrative	18.5			14.9			19.4
Stock-based compensation expense related to stock awards and ESP Plan purchases	108.8			80.7			93.6
Tax benefit	(27.1		)	(22.0		)	(22.2		)
Stock-based compensation expense related to stock awards and ESP Plan purchases	$	81.7		$	58.7		$	71.4

Disclosure of Share-based Compensation Arrangements by Share-based Payment Award

.

Autodesk uses the BSM option-pricing model to estimate the fair value of stock-based awards based on the following assumptions:

	Fiscal Year Ended		Fiscal Year Ended		Fiscal Year Ended
	January 31, 2012		January 31, 2011		January 31, 2010
	Stock Option Plans	ESP Plan	Stock Option Plans	ESP Plan	Stock Option Plans	ESP Plan
Range of expected volatilities	40 - 49%	34 - 44%	40 - 45%	33 - 47%	43 - 55%	43 - 73%
Range of expected lives (in years)	2.6 - 4.8	0.5 - 2.0	2.6 - 4.4	0.5 - 2.0	2.7 - 4.0	0.5 - 2.0
Expected dividends	—%	—%	—%	—%	—%	—%
Range of risk-free interest rates	0.5 - 1.9%	0.1 - 0.8%	0.8 - 1.9%	0.2 - 1.1%	1.0 - 2.4%	0.2 - 1.0%
Expected forfeitures	7.8 - 10.5%	7.8 - 10.5%	10.5 - 13.5%	10.5 - 13.5%	13.5%	13.5%

XML

Fair Value of Derivative Instruments (Detail) (USD $) In Millions, unless otherwise specified	Jan. 31, 2012	Jan. 31, 2011
Derivatives, Fair Value [Line Items]
Derivative Assets	$ 18.1	$ 5.1
Derivative Liabilities	2.2	1.2
Designated as Hedging Instrument | Foreign exchange contracts | Prepaid expenses and other current assets
Derivatives, Fair Value [Line Items]
Derivative Assets	11.9	5.1
Designated as Hedging Instrument | Foreign exchange contracts | Other Accrued Liabilities [Member]
Derivatives, Fair Value [Line Items]
Derivative Liabilities	2.2	1.2
Not Designated as Hedging Instrument | Other assets
Derivatives, Fair Value [Line Items]
Derivative Assets	$ 6.2	$ 0

XML

Business and Summary of Significant Accounting Policies Expected Future Amortization Expense for Purcahsed Technologies, Customer Relationships and Trade Names (Details) (USD $) In Millions, unless otherwise specified	12 Months Ended
	Jan. 31, 2012
Expected Amortization Expense [Line Items]
2013	$ 65.7
2014	47.1
2015	25.5
2016	7.9
2017	1.0
Thereafter	1.6
Total	$ 148.8

XML

Segments Information Concerning the Operations Of Reportable Segments (Details) (USD $) In Millions, unless otherwise specified	3 Months Ended								12 Months Ended
	Jan. 31, 2012	Oct. 31, 2011	Jul. 31, 2011	Apr. 30, 2011	Jan. 31, 2011	Oct. 31, 2010	Jul. 31, 2010	Apr. 30, 2010	Jan. 31, 2012		Jan. 31, 2011		Jan. 31, 2010
Revenue, Net	$ 592.4	$ 548.6	$ 546.3	$ 528.3	$ 527.7	$ 476.7	$ 472.8	$ 474.6	$ 2,215.6		$ 1,951.8		$ 1,713.7
Gross Profit	534.9	489.0	488.9	473.7	479.3	428.2	424.4	423.3	1,986.5		1,755.2		1,521.9
Depreciation and Amortization									115.5		105.4		111.5
Platform Solutions and Emerging Business
Revenue, Net									833.1		716.2		624.0
Gross Profit									788.0		678.9		589.7
Depreciation and Amortization									1.8		3.0		3.1
Architecture, Engineering And Construction
Revenue, Net									626.4		568.0		513.3
Gross Profit									569.7		517.6		465.2
Depreciation and Amortization									0.7		1.6		1.8
Manufacturing
Revenue, Net									540.3		470.0		386.9
Gross Profit									496.1		439.5		358.4
Depreciation and Amortization									1.7		2.3		2.5
Media and Entertainment
Revenue, Net									215.8		197.6		189.1
Gross Profit									174.6		153.9		144.4
Depreciation and Amortization									0.5		1.1		1.8
All Other Segments
Revenue, Net									0	[1]	0	[1]	0.4	[1]
Unallocated Amount to Segment
Gross Profit									(41.9)	[2]	(34.7)	[2]	(35.8)	[2]
Depreciation and Amortization									$ 110.8		$ 97.4		$ 102.3

[1] Other primarily consisted of revenue from Autodesk’s Location Services division, which Autodesk disposed of in February 2009.

[2] Unallocated amounts primarily relate to corporate expenses and other costs and expenses that are managed outside the reportable segments, including stock-based compensation expense.

XML

Business and Summary of Significant Accounting Policies Accounts Receivable, Net (Details) (USD $) In Millions, unless otherwise specified	Jan. 31, 2012	Jan. 31, 2011
Accounts, Notes, Loans and Financing Receivable [Line Items]
Trade accounts receivable	$ 433.9	$ 363.0
Less: Allowance for Doubtful Accounts	(5.5)	(4.2)
Product Returns Reserve	(5.8)	(10.6)
Partner programs and other obligations	(27.5)	(29.8)
Accounts Receivable, Net	$ 395.1	$ 318.4

XML

Available for Sale Securities (Detail) (USD $) In Millions, unless otherwise specified	12 Months Ended
	Jan. 31, 2012	Jan. 31, 2011	Jan. 31, 2010
Derivative Instruments and Hedging Activities Disclosure [Line Items]
Available-for-sale securities gross gains (losses)		$ 1.7
Proceeds from Sale and Maturity of Marketable Securities	559.1	410.7	355.1
Notional amount of foreign currency option collar and forward contracts designated as cash flow hedges	419.6	345.5
Net loss expected to be recognized into earnings	(9.2)	0.8	(2.3)
Notional amount of foreign currency forward contracts not designated as cash flow hedges	$ 75.1	$ 56.1

XML

Borrowing Arrangements (Detail) (USD $) In Millions, unless otherwise specified	12 Months Ended
	Jan. 31, 2012
Debt Disclosure [Line Items]
Unsecured revolving credit facility	$ 400.0
Unsecured revolving credit facility, option to request an increase in the amount of the credit facility up to	100.0
Extinguishment of Debt, Amount	250.0
Line of credit facility, outstanding borrowings	$ 0
Line of credit facility, expiration	May 2016

XML

Income Taxes Components Of Deferred Tax Assets and Liabilities (Details) (USD $) In Millions, unless otherwise specified	Jan. 31, 2012	Jan. 31, 2011
Income Taxes [Abstract]
Nonqualified stock options	$ 71.6	$ 69.0
Research and development tax credit carryforwards	49.3	64.0
Foreign tax credit carryforwards	0.1	16.6
Accrued compensation and benefits	35.6	33.7
Other accruals not currently deductible for tax	31.1	20.8
Purchased technology and capitalized software	20.6	25.3
Fixed assets	15.9	15.1
Tax loss carryforwards	12.4	6.3
Other	3.7	2.6
Total deferred tax assets	240.3	253.4
Less: valuation allowance	(47.5)	(42.9)
Net deferred tax assets	192.8	210.5
Tax method change on advanced payments	(6.3)	(9.4)
Unremitted earnings of foreign subsidiaries	(20.6)	(53.6)
Total deferred tax liability	(26.9)	(63.0)
Net deferred tax assets	$ 165.9	$ 147.5

XML

Cost and Fair Value of Financial Instruments (Detail) (USD $) In Millions, unless otherwise specified	12 Months Ended
	Jan. 31, 2012		Jan. 31, 2011		Jan. 31, 2010	Jan. 31, 2009
Schedule of Available-for-sale Securities [Line Items]
Cash equivalents	$ 1,156.9		$ 1,075.1		$ 838.7	$ 917.6
Derivative Instruments And Hedges at Amortized Cost, Net	11.6		3.9	[1]
Unrealized Gain on Foreign Currency Derivatives, before Tax	6.5		1.9	[1]
Unrealized Loss on Foreign Currency Derivatives, before Tax	(2.2)		(1.9)	[1]
Derivative, Fair Value, Net	15.9		3.9	[1]
Amortized Cost Securities	1,327.7		1,150.3
Unrealized Gain on Securities	9.8		5.6
Unrealized Loss on Securities	(2.5)		(2.1)
Total	1,335.0		1,153.8
Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Trading Securities	29.8		29.7
Trading Securities, Unrealized Holding Gain	1.8		1.7
Trading Securities, Unrealized Holding Loss	(0.1)		(0.1)
Trading Securities, Fair Value Disclosure			31.3
Other Assets
Schedule of Available-for-sale Securities [Line Items]
Convertible Debt Securities, Amortized Cost	18.3
Convertible Debt Securities, Unrealized Gains	0
Convertible Debt Securities, Unrealized Losses	0
Convertible Debt Securities, Fair Value Disclosure	18.3
Fair Value, Inputs, Level 1
Schedule of Available-for-sale Securities [Line Items]
Derivative, Fair Value, Net	0		0	[1]
Total	340.6		458.4
Fair Value, Inputs, Level 1 | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Trading Securities, Fair Value Disclosure	31.5		31.3
Fair Value, Inputs, Level 1 | Other Assets
Schedule of Available-for-sale Securities [Line Items]
Convertible Debt Securities, Fair Value Disclosure	0
Fair Value, Inputs, Level 2
Schedule of Available-for-sale Securities [Line Items]
Derivative, Fair Value, Net	9.7		3.9	[1]
Total	965.7		691.2
Fair Value, Inputs, Level 2 | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Trading Securities, Fair Value Disclosure	0		0
Fair Value, Inputs, Level 2 | Other Assets
Schedule of Available-for-sale Securities [Line Items]
Convertible Debt Securities, Fair Value Disclosure	0
Fair Value, Inputs, Level 3
Schedule of Available-for-sale Securities [Line Items]
Derivative, Fair Value, Net	6.2		0	[1]
Total	28.7		4.2
Fair Value, Inputs, Level 3 | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Trading Securities, Fair Value Disclosure	0		0
Fair Value, Inputs, Level 3 | Other Assets
Schedule of Available-for-sale Securities [Line Items]
Convertible Debt Securities, Fair Value Disclosure	18.3
Commercial paper and corporate securities | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Amortized Cost Basis	143.7		47.6
Available-for-sale Securities, Gross Unrealized Gains	0.1		0.1
Available-for-sale Securities, Gross Unrealized Losses	0		0
Available-for-sale Securities, Fair Value Disclosure	143.8		47.7
Commercial paper and corporate securities | Fair Value, Inputs, Level 1 | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	35.3		37.7
Commercial paper and corporate securities | Fair Value, Inputs, Level 2 | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	108.5		10.0
Commercial paper and corporate securities | Fair Value, Inputs, Level 3 | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	0		0
Certificates of deposit and time deposits | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Amortized Cost Basis	5.2		29.0
Available-for-sale Securities, Gross Unrealized Gains	0		0
Available-for-sale Securities, Gross Unrealized Losses	0		0
Available-for-sale Securities, Fair Value Disclosure	5.2		29.0
Certificates of deposit and time deposits | Fair Value, Inputs, Level 1 | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	0		25.0
Certificates of deposit and time deposits | Fair Value, Inputs, Level 2 | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	5.2		4.0
Certificates of deposit and time deposits | Fair Value, Inputs, Level 3 | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	0		0
U.S. Treasury Securities | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Amortized Cost Basis	30.7		26.0
Available-for-sale Securities, Gross Unrealized Gains	0		0
Available-for-sale Securities, Gross Unrealized Losses	0		0
Available-for-sale Securities, Fair Value Disclosure	30.7		26.0
U.S. Treasury Securities | Marketable Securities, Noncurrent
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Amortized Cost Basis	23.6		12.7
Available-for-sale Securities, Gross Unrealized Gains	0.2		0.1
Available-for-sale Securities, Gross Unrealized Losses	0		0
Available-for-sale Securities, Fair Value Disclosure	23.8		12.8
U.S. Treasury Securities | Fair Value, Inputs, Level 1 | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	30.7		26.0
U.S. Treasury Securities | Fair Value, Inputs, Level 1 | Marketable Securities, Noncurrent
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	23.8		12.8
U.S. Treasury Securities | Fair Value, Inputs, Level 2 | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	0		0
U.S. Treasury Securities | Fair Value, Inputs, Level 2 | Marketable Securities, Noncurrent
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	0		0
U.S. Treasury Securities | Fair Value, Inputs, Level 3 | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	0		0
U.S. Treasury Securities | Fair Value, Inputs, Level 3 | Marketable Securities, Noncurrent
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	0		0
US government agency securities | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Amortized Cost Basis	38.2		47.2
Available-for-sale Securities, Gross Unrealized Gains	0		0
Available-for-sale Securities, Gross Unrealized Losses	0		0
Available-for-sale Securities, Fair Value Disclosure	38.2		47.2
US government agency securities | Marketable Securities, Noncurrent
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Amortized Cost Basis	51.4		12.7
Available-for-sale Securities, Gross Unrealized Gains	0.2		0.2
Available-for-sale Securities, Gross Unrealized Losses	0		0
Available-for-sale Securities, Fair Value Disclosure	51.6		12.9
US government agency securities | Fair Value, Inputs, Level 1 | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	38.2		47.2
US government agency securities | Fair Value, Inputs, Level 1 | Marketable Securities, Noncurrent
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	51.6		12.9
US government agency securities | Fair Value, Inputs, Level 2 | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	0		0
US government agency securities | Fair Value, Inputs, Level 2 | Marketable Securities, Noncurrent
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	0		0
US government agency securities | Fair Value, Inputs, Level 3 | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	0		0
US government agency securities | Fair Value, Inputs, Level 3 | Marketable Securities, Noncurrent
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	0		0
Municipal securities | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Amortized Cost Basis	4.7		8.6
Available-for-sale Securities, Gross Unrealized Gains	0		0
Available-for-sale Securities, Gross Unrealized Losses	0		0
Available-for-sale Securities, Fair Value Disclosure	4.7		8.6
Municipal securities | Marketable Securities, Noncurrent
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Amortized Cost Basis	4.6		4.7
Available-for-sale Securities, Gross Unrealized Gains	0		0
Available-for-sale Securities, Gross Unrealized Losses	0		0
Available-for-sale Securities, Fair Value Disclosure	4.6		4.7
Municipal securities | Fair Value, Inputs, Level 1 | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	4.7		8.6
Municipal securities | Fair Value, Inputs, Level 1 | Marketable Securities, Noncurrent
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	4.6		4.7
Municipal securities | Fair Value, Inputs, Level 2 | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	0		0
Municipal securities | Fair Value, Inputs, Level 2 | Marketable Securities, Noncurrent
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	0		0
Municipal securities | Fair Value, Inputs, Level 3 | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	0		0
Municipal securities | Fair Value, Inputs, Level 3 | Marketable Securities, Noncurrent
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	0		0
Other | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Amortized Cost Basis	0.3		0.3
Available-for-sale Securities, Gross Unrealized Gains	0		0
Available-for-sale Securities, Gross Unrealized Losses	0		0
Available-for-sale Securities, Fair Value Disclosure	0.3		0.3
Other | Fair Value, Inputs, Level 1 | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	0.3		0.3
Other | Fair Value, Inputs, Level 2 | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	0		0
Other | Fair Value, Inputs, Level 3 | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	0		0
Sovereign Debt | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Amortized Cost Basis			9.1
Available-for-sale Securities, Gross Unrealized Gains			0
Available-for-sale Securities, Gross Unrealized Losses			0
Available-for-sale Securities, Fair Value Disclosure			9.1
Sovereign Debt | Marketable Securities, Noncurrent
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Amortized Cost Basis			3.9
Available-for-sale Securities, Gross Unrealized Gains			0.1
Available-for-sale Securities, Gross Unrealized Losses			0
Available-for-sale Securities, Fair Value Disclosure			4.0
Sovereign Debt | Fair Value, Inputs, Level 1 | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure			0
Sovereign Debt | Fair Value, Inputs, Level 1 | Marketable Securities, Noncurrent
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure			0
Sovereign Debt | Fair Value, Inputs, Level 2 | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure			9.1
Sovereign Debt | Fair Value, Inputs, Level 2 | Marketable Securities, Noncurrent
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure			4.0
Sovereign Debt | Fair Value, Inputs, Level 3 | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure			0
Sovereign Debt | Fair Value, Inputs, Level 3 | Marketable Securities, Noncurrent
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure			0
Corporate debt securities | Marketable Securities, Noncurrent
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Amortized Cost Basis	107.8		152.6
Available-for-sale Securities, Gross Unrealized Gains	1.0		1.5
Available-for-sale Securities, Gross Unrealized Losses	(0.2)		(0.1)
Available-for-sale Securities, Fair Value Disclosure	108.6		154.0
Corporate debt securities | Fair Value, Inputs, Level 1 | Marketable Securities, Noncurrent
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	108.6		154.0
Corporate debt securities | Fair Value, Inputs, Level 2 | Marketable Securities, Noncurrent
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	0		0
Corporate debt securities | Fair Value, Inputs, Level 3 | Marketable Securities, Noncurrent
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	0		0
Taxable auction rate securities | Marketable Securities, Noncurrent
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Amortized Cost Basis	4.2		4.2
Available-for-sale Securities, Gross Unrealized Gains	0		0
Available-for-sale Securities, Gross Unrealized Losses	0		0
Available-for-sale Securities, Fair Value Disclosure	4.2		4.2
Taxable auction rate securities | Fair Value, Inputs, Level 1 | Marketable Securities, Noncurrent
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	0		0
Taxable auction rate securities | Fair Value, Inputs, Level 2 | Marketable Securities, Noncurrent
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	0		0
Taxable auction rate securities | Fair Value, Inputs, Level 3 | Marketable Securities, Noncurrent
Schedule of Available-for-sale Securities [Line Items]
Available-for-sale Securities, Fair Value Disclosure	4.2		4.2
Certificates of deposit and time deposits
Schedule of Available-for-sale Securities [Line Items]
Cash equivalents	493.6	[2]	383.3	[2]
Cash and Cash Equivalents, Fair Value Disclosure	493.6	[2]	383.3	[2]
Certificates of deposit and time deposits | Fair Value, Inputs, Level 1
Schedule of Available-for-sale Securities [Line Items]
Cash and Cash Equivalents, Fair Value Disclosure	11.3	[2]	97.9	[2]
Certificates of deposit and time deposits | Fair Value, Inputs, Level 2
Schedule of Available-for-sale Securities [Line Items]
Cash and Cash Equivalents, Fair Value Disclosure	482.3	[2]	285.4	[2]
Certificates of deposit and time deposits | Fair Value, Inputs, Level 3
Schedule of Available-for-sale Securities [Line Items]
Cash and Cash Equivalents, Fair Value Disclosure	0	[2]	0	[2]
Commercial Paper
Schedule of Available-for-sale Securities [Line Items]
Cash equivalents	297.9	[2]	331.0	[2]
Cash and Cash Equivalents, Fair Value Disclosure	297.9	[2]	331.0	[2]
Commercial Paper | Fair Value, Inputs, Level 1
Schedule of Available-for-sale Securities [Line Items]
Cash and Cash Equivalents, Fair Value Disclosure	0	[2]	0	[2]
Commercial Paper | Fair Value, Inputs, Level 2
Schedule of Available-for-sale Securities [Line Items]
Cash and Cash Equivalents, Fair Value Disclosure	297.9	[2]	331.0	[2]
Commercial Paper | Fair Value, Inputs, Level 3
Schedule of Available-for-sale Securities [Line Items]
Cash and Cash Equivalents, Fair Value Disclosure	0	[2]	0	[2]
Money Market Funds
Schedule of Available-for-sale Securities [Line Items]
Cash equivalents	62.1	[2]	43.8	[2]
Cash and Cash Equivalents, Fair Value Disclosure	62.1	[2]	43.8	[2]
Money Market Funds | Fair Value, Inputs, Level 1
Schedule of Available-for-sale Securities [Line Items]
Cash and Cash Equivalents, Fair Value Disclosure	0	[2]	0	[2]
Money Market Funds | Fair Value, Inputs, Level 2
Schedule of Available-for-sale Securities [Line Items]
Cash and Cash Equivalents, Fair Value Disclosure	62.1	[2]	43.8	[2]
Money Market Funds | Fair Value, Inputs, Level 3
Schedule of Available-for-sale Securities [Line Items]
Cash and Cash Equivalents, Fair Value Disclosure	0	[2]	0	[2]
Rabbi Trust | Marketable Securities, Current
Schedule of Available-for-sale Securities [Line Items]
Trading Securities, Fair Value Disclosure	$ 31.5

[1] Included in “Prepaid expenses and other current assets,” "Other assets," or “Other accrued liabilities” in the accompanying Consolidated Balance Sheets.

[2] Included in “Cash and cash equivalents” in the accompanying Consolidated Balance Sheets.

XML

Employee and Director Stock Plans

12 Months Ended

Jan. 31, 2012

Notes to Financial Statements [Abstract]

Stock-based Compensation Expense

.    Employee and Director Stock Plans

Stock Plans

As of January 31, 2012, Autodesk maintained two active stock option plans for the purpose of granting equity awards to employees and to non-employee members of Autodesk’s Board of Directors: the 2012 Employee Stock Plan (“2012 Employee Plan”), which is available only to employees, and the Autodesk 2012 Outside Directors’ Plan (“2012 Directors' Plan”), which is available only to non-employee directors. Additionally, there are eight expired or terminated plans with options outstanding. The exercise price of all stock options granted under these plans was equal to the fair market value of the stock on the grant date.

The 2012 Employee Plan was approved by Autodesk's stockholders and became effective on January 6, 2012. The 2012 Employee Plan replaced the 2008 Employee Stock Plan, as amended ("2008 Plan") and no further equity awards may be granted under the 2008 Plan. The 2012 Employee Plan reserves up to 21.2 million shares which includes 15.2 million shares reserved upon the effectiveness of the 2012 Employee Plan as well as up to 6.0 million shares forfeited under certain prior employee stock plans during the life of the 2012 Employee Plan. The 2012 Employee Plan permits the grant of stock options, restricted stock units and restricted stock awards. Each restricted stock unit or restricted stock award granted will be counted against the shares authorized for issuance under the 2012 Employee Plan as 1.79 shares. If a granted option, restricted stock unit or restricted stock award expires or becomes unexercisable for any reason, the unpurchased or forfeited shares that were granted may be returned to the 2012 Employee Plan and may become available for future grant under the 2012 Employee Plan. As of January 31, 2012, no options or restricted stock have been granted under the 2012 Employee Plan. Options and restricted stock that were granted under the 2008 Stock Plan vest over periods ranging from immediately upon grant to over a four year period and options expire within four to ten years from the date of grant. The 2012 Employee Plan will expire on June 30, 2022. At January 31, 2012, 15.4 million shares were available for future issuance under the 2012 Employee Plan.

The 2012 Director's Plan was approved by Autodesk's stockholders and became effective on January 6, 2012. The 2012 Directors' Plan replaced the 2010 Outside Directors' Plan, as amended ("2010 Plan"). The 2012 Directors' Plan permits the grant of stock options, restricted stock units and restricted stock awards to non-employee members of Autodesk’s Board of Directors. Each restricted stock unit or restricted stock award granted will be counted against the shares authorized for issuance under the 2012 Directors' Plan as 2.11 shares. As of January 31, 2012, no options or restricted stock have been granted under the 2012 Directors' Plan. Options and restricted stock that were granted under the 2010 Outside Directors' Plan vest over periods ranging from one year to over a four year period and options expire within seven years from the date of grant. The 2012 Directors' Plan reserved 2.6 million shares of Autodesk common stock. The 2012 Employee Plan will expire on June 30, 2022. At January 31, 2012, 2.6 million shares were available for future issuance under the 2012 Director's Plan.

The following sections summarize activity under Autodesk’s stock plans.

Stock Options:

A summary of stock option activity for the fiscal year ended January 31, 2012 is as follows:

	Number of Shares		Weighted average exercise price per share
	(in millions)
Options outstanding at January 31, 2011	30.4		$	28.93
Granted	5.4		40.71
Exercised	(5.3	)	24.85
Canceled	(2.1	)	36.29
Options outstanding at January 31, 2012	28.4		$	31.39
Options exercisable at January 31, 2012	16.7		$	30.98
Options vested and exercisable as of January 31, 2012 and expected to vest thereafter (1)	27.7		$	31.25
Options available for grant at January 31, 2012	18.0

——————

(1) Options expected to vest reflect an estimated forfeiture rate. The weighted average remaining contractual life for these options is 3.9 years and the aggregate intrinsic value is $199.3 million.

As of January 31, 2012, total compensation cost of $74.9 million related to non-vested options is expected to be recognized over a weighted average period of 1.7 years. The following table summarizes information about the pre-tax intrinsic value of options exercised, and the weighted average grant date fair value per share of options granted, during the fiscal years ended January 31, 2012, 2011 and 2010.

	Fiscal year ended January 31,
	2012		2011		2010
Intrinsic value of options exercised (1)	$	85.7	$	61.9	$	18.8
Weighted average grant date fair value per share of stock options granted (2)	$	14.04	$	9.30	$	6.13

——————

(1) The intrinsic value of options exercised is calculated as the difference between the exercise price of the option and the market value of the stock on the date of exercise.

(2) The weighted average grant date fair value per share of stock options granted is calculated, as of the stock option grant date, using the BSM option pricing model.

The following table summarizes information about options outstanding and exercisable at January 31, 2012:

	Options Exercisable						Options Outstanding
	Number of Shares (in millions)	Weighted average contractual life (in years)	Weighted average exercise price per share		Aggregate intrinsic value(1) (in millions)		Number of Shares (in millions)	Weighted average contractual life (in years)	Weighted average exercise price per share		Aggregate intrinsic value(1) (in millions)
Range of per-share exercise prices:
$2.28 - $17.37	3.8		$	12.94			5.8		$	13.61
$17.39 - $29.49	2.6		25.81				6.1		27.64
$29.50 - $37.16	4.4		32.94				6.0		32.72
$37.26 - $41.62	2.0		38.40				5.9		40.46
$42.01 - $49.80	3.9		45.69				4.6		45.42
	16.7	2.1	$	30.98	$	127.7	28.4	4.0	$	31.39	$	201.3

____________________ 

(1) Represents the total intrinsic value, based on Autodesk’s closing stock price of $36.00 per share as of January 31, 2012, which would have been received by the option holders had all option holders exercised their options as of that date.

These options will expire if not exercised at specific dates ranging through December 2021.

Restricted Stock:

A summary of restricted stock award and restricted stock unit activity for the fiscal year ended January 31, 2012 is as follows:

	Unreleased Restricted Stock		Weighted average grant date fair value
	(in thousands)
Unreleased restricted stock at January 31, 2011	1,426.8		$	30.43
Granted	1,610.5		37.07
Released	(707.6	)	25.95
Canceled	(145.6	)	32.37
Unreleased restricted stock at January 31, 2012	2,184.1		$	36.65

During the fiscal year ended January 31, 2012, Autodesk granted approximately 1,594.5 thousand restricted stock units. The restricted stock units vest over periods ranging from immediately upon grant to a pre-determined date that is typically within three years from the date of grant. Restricted stock units are not considered outstanding stock at the time of grant, as the holders of these units are not entitled to any of the rights of a stockholder, including voting rights. The fair value of the restricted stock units is expensed ratably over the vesting period. Autodesk recorded stock-based compensation expense related to restricted stock units of $29.1 million and $8.9 million during fiscal years ended January 31, 2012 and 2011, respectively. As of January 31, 2012, total compensation cost not yet recognized of $47.7 million related to non-vested awards, is expected to be recognized over a weighted average period of 1.6 years. At January 31, 2012, the number of units granted but unreleased was 2,170.6 thousand.

During the fiscal year ended January 31, 2012, Autodesk granted approximately 16,000 restricted stock awards. Restricted stock awards vest on the date of the next annual meeting. Restricted stock awards are considered outstanding at the time of grant, as the stock award holders are entitled to many of the rights of a stockholder, including voting rights. The fair value of the restricted stock awards is expensed ratably over the vesting period. Autodesk recorded stock-based compensation expense related to restricted stock awards of $0.6 million and $0.7 million during fiscal years ended January 31, 2012 and 2011, respectively. As of January 31, 2011, total compensation cost not yet recognized of $0.2 million related to non-vested awards, is expected to be recognized over a weighted average period of 0.4 years. At January 31, 2012, the number of awards granted but unreleased was 13,500.

1998 Employee Qualified Stock Purchase Plan (“ESP Plan”)

Under Autodesk’s ESP Plan, which was approved by stockholders in 1998, eligible employees may purchase shares of Autodesk’s common stock at their discretion using up to 15% of their eligible compensation subject to certain limitations, at not less than 85% of fair market value as defined in the ESP Plan. At January 31, 2012, a total of 29.7 million shares were available for future issuance. This amount automatically increases on the first trading day of each fiscal year by an amount equal to the lesser of 10.0 million shares or 2% of the total of (1) outstanding shares plus (2) any shares repurchased by Autodesk during the prior fiscal year. Under the ESP Plan, the Company issues shares on the first trading day following March 31 and September 30 of each fiscal year. The ESP Plan expires during fiscal 2018.

Autodesk issued 2.8 million shares under the ESP Plan at an average price of $18.26 per share in fiscal 2012, 3.2 million shares at an average price of $14.77 per share in fiscal 2011, and 3.1 million shares at an average price of $14.41 per share in fiscal 2010. The weighted average grant date fair value of awards granted under the ESP Plan during fiscal 2012, 2011 and 2010, calculated as of the award grant date using the BSM option pricing model, was $9.95, $10.11 and $7.19 per share, respectively. Autodesk recorded $23.8 million, $18.2 million and $26.6 million of compensation expense associated with the ESP Plan in fiscal 2012, 2011 and 2010, respectively.

Equity Compensation Plan Information

The following table summarizes the number of outstanding options granted to employees and directors, as well as the number of securities remaining available for future issuance under these plans as of January 31, 2012 (number of securities in millions).

	(a)	(b)		(c)
Plan category	Number of securities to be issued upon exercise of outstanding options	Weighted-average exercise price of outstanding options		Number of securities remaining available for future issuance under equity compensation plans (excluding securities reflected in column (a))
Equity compensation plans approved by security holders	30.2	$	29.38	47.7	(1)
Equity compensation plans not approved by security holders(2)	0.4	$	11.03	—
Total	30.6	$	29.15	47.7

____________________ 

(1) Included in this amount are 29.7 million securities available for future issuance under Autodesk’s ESP Plan.

(2) Amounts correspond to Autodesk’s Nonstatutory Stock Option Plan, which was terminated by the Board of Directors in December 2004.

XML

Income Taxes Unrecognized Tax Benefits Reconciliation, Table (Details) (USD $) In Millions, unless otherwise specified	12 Months Ended
	Jan. 31, 2012	Jan. 31, 2011	Jan. 31, 2010
Significant Change in Unrecognized Tax Benefits is Reasonably Possible [Line Items]
Gross unrecognized tax benefits at the beginning of the fiscal year	$ 188.4	$ 178.2	$ 169.4
Increases for tax positions of prior years	0.4	2.0	3.1
Decreases for tax positions of prior years	(0.4)	(3.5)	(1.9)
Increases for tax positions related to the current year	14.3	13.9	11.1
Decreases for lapse of statute of limitations/audit settlements	(1.6)	(2.2)	(3.5)
Gross unrecognized tax benefits at the end of the fiscal year	$ 201.1	$ 188.4	$ 178.2

XML

Business and Summary of Significant Accounting Policies Changes In the Carrying Amount of Goodwill (Details) (USD $) In Millions, unless otherwise specified	12 Months Ended
	Jan. 31, 2012	Jan. 31, 2011
Goodwill [Roll Forward]
Goodwill before accumulated impairments	$ 703.3	$ 692.1
Accumulated impairment losses	(149.2)	(149.2)
Goodwill	554.1	542.9
Goodwill, Acquired During Period		10.1
Goodwill, Translation and Purchase Accounting Adjustments	(1.8)	1.1
Goodwill before accumulated impairments	831.6	703.3
Accumulated impairment losses	(149.2)	(149.2)
Goodwill	682.4	554.1
Platform Solutions and Emerging Business
Goodwill [Roll Forward]
Goodwill before accumulated impairments	45.3	40.2
Accumulated impairment losses	0	0
Goodwill	45.3	40.2
Goodwill, Acquired During Period		4.6
Goodwill, Translation and Purchase Accounting Adjustments	(0.7)	0.5
Goodwill before accumulated impairments	76.6	45.3
Accumulated impairment losses	0	0
Goodwill	76.6	45.3
Architecture, Engineering and Construction
Goodwill [Roll Forward]
Goodwill before accumulated impairments	224.2	224.8
Accumulated impairment losses	0	0
Goodwill	224.2	224.8
Goodwill, Acquired During Period		0
Goodwill, Translation and Purchase Accounting Adjustments	(1.2)	(0.6)
Goodwill before accumulated impairments	247.7	224.2
Accumulated impairment losses	0	0
Goodwill	247.7	224.2
Manufacturing
Goodwill [Roll Forward]
Goodwill before accumulated impairments	279.1	277.9
Accumulated impairment losses	0	0
Goodwill	279.1	277.9
Goodwill, Acquired During Period		0
Goodwill, Translation and Purchase Accounting Adjustments	0.1	1.2
Goodwill before accumulated impairments	323.3	279.1
Accumulated impairment losses	0	0
Goodwill	323.3	279.1
Media and Entertainment
Goodwill [Roll Forward]
Goodwill before accumulated impairments	154.7	149.2
Accumulated impairment losses	(149.2)	(149.2)
Goodwill	5.5	0
Goodwill, Acquired During Period		5.5
Goodwill, Translation and Purchase Accounting Adjustments	0	0
Goodwill before accumulated impairments	184.0	154.7
Accumulated impairment losses	(149.2)	(149.2)
Goodwill	34.8	5.5
Scaleform Corporation
Goodwill [Roll Forward]
Goodwill, Acquired During Period	22.6
Scaleform Corporation | Platform Solutions and Emerging Business
Goodwill [Roll Forward]
Goodwill, Acquired During Period	0
Scaleform Corporation | Architecture, Engineering and Construction
Goodwill [Roll Forward]
Goodwill, Acquired During Period	0
Scaleform Corporation | Manufacturing
Goodwill [Roll Forward]
Goodwill, Acquired During Period	0
Scaleform Corporation | Media and Entertainment
Goodwill [Roll Forward]
Goodwill, Acquired During Period	22.6
Blue Ridge Numerics, Inc
Goodwill [Roll Forward]
Goodwill, Acquired During Period	22.3
Blue Ridge Numerics, Inc | Platform Solutions and Emerging Business
Goodwill [Roll Forward]
Goodwill, Acquired During Period	0
Blue Ridge Numerics, Inc | Architecture, Engineering and Construction
Goodwill [Roll Forward]
Goodwill, Acquired During Period	0
Blue Ridge Numerics, Inc | Manufacturing
Goodwill [Roll Forward]
Goodwill, Acquired During Period	22.3
Blue Ridge Numerics, Inc | Media and Entertainment
Goodwill [Roll Forward]
Goodwill, Acquired During Period	0
Instructables Corporation
Goodwill [Roll Forward]
Goodwill, Acquired During Period	24.4
Instructables Corporation | Platform Solutions and Emerging Business
Goodwill [Roll Forward]
Goodwill, Acquired During Period	24.4
Instructables Corporation | Architecture, Engineering and Construction
Goodwill [Roll Forward]
Goodwill, Acquired During Period	0
Instructables Corporation | Manufacturing
Goodwill [Roll Forward]
Goodwill, Acquired During Period	0
Instructables Corporation | Media and Entertainment
Goodwill [Roll Forward]
Goodwill, Acquired During Period	0
Micro Application Packages Limited
Goodwill [Roll Forward]
Goodwill, Acquired During Period	12.7
Micro Application Packages Limited | Platform Solutions and Emerging Business
Goodwill [Roll Forward]
Goodwill, Acquired During Period	0
Micro Application Packages Limited | Architecture, Engineering and Construction
Goodwill [Roll Forward]
Goodwill, Acquired During Period	12.7
Micro Application Packages Limited | Manufacturing
Goodwill [Roll Forward]
Goodwill, Acquired During Period	0
Micro Application Packages Limited | Media and Entertainment
Goodwill [Roll Forward]
Goodwill, Acquired During Period	0
T-splines
Goodwill [Roll Forward]
Goodwill, Acquired During Period	19.8
T-splines | Platform Solutions and Emerging Business
Goodwill [Roll Forward]
Goodwill, Acquired During Period	0
T-splines | Architecture, Engineering and Construction
Goodwill [Roll Forward]
Goodwill, Acquired During Period	0
T-splines | Manufacturing
Goodwill [Roll Forward]
Goodwill, Acquired During Period	19.8
T-splines | Media and Entertainment
Goodwill [Roll Forward]
Goodwill, Acquired During Period	0
Other Acquisitions
Goodwill [Roll Forward]
Goodwill, Acquired During Period	28.3
Other Acquisitions | Platform Solutions and Emerging Business
Goodwill [Roll Forward]
Goodwill, Acquired During Period	7.6
Other Acquisitions | Architecture, Engineering and Construction
Goodwill [Roll Forward]
Goodwill, Acquired During Period	12.0
Other Acquisitions | Manufacturing
Goodwill [Roll Forward]
Goodwill, Acquired During Period	2.0
Other Acquisitions | Media and Entertainment
Goodwill [Roll Forward]
Goodwill, Acquired During Period	$ 6.7

XML

Acquisitions (Tables)

12 Months Ended

Jan. 31, 2012

Schedule of Recognized Identified Assets Acquired and Liabilities Assumed

The following table summarizes the fair value of the assets acquired and liabilities assumed by major class for each of the business combinations and technology acquisitions completed during the fiscal year ended January 31, 2012:

	Scaleform			Blue Ridge			Instructables			MAP			Turbo Squid		T-Splines		Other
Developed technologies	$	5.9		$	6.0		$	0.4		$	2.5		$	26.0	$	2.1	$	21.7
Customer relationships	4.4			9.2			0.2			2.0			—		0.7		3.9
Trade name	1.4			1.1			1.6			0.9			—		0.4		1.2
User List	—			—			5.1			—			—		—		—
Patent	3.6			—			—			—			—		—		—
In-process research and development	0.6			0.6			—			—			—		—		—
Goodwill	22.6			22.3			24.4			12.7			—		19.8		28.3
Deferred Revenue	—			(1.2		)	—			—			—		—		—
Deferred tax asset (liability)	(2.5		)	(3.6		)	(1.6		)	(1.6		)	—		—		0.2
Net tangible assets (liabilities)	0.2			6.8			0.1			6.5			—		—		(0.5		)
Total	$	36.2		$	41.2		$	30.2		$	23.0		$	26.0	$	23.0	$	54.8

XML

Income Taxes (Tables)

12 Months Ended

Jan. 31, 2012

Provision for income taxes

The provision for income taxes consists of the following:

	Fiscal year ended January 31,
	2012			2011			2010
Federal:
Current	$	54.3		$	16.0		$	12.3
Deferred	(34.5		)	(8.2		)	(33.0		)
State:
Current	4.9			(1.5		)	3.0
Deferred	1.3			7.4			7.1
Foreign:
Current	55.9			48.4			34.1
Deferred	(4.3		)	(2.1		)	3.2
	$	77.6		$	60.0		$	26.7

Differences between the U.S. statutory rate and the aggregate income tax provision

The differences between the U.S. statutory rate and the aggregate income tax provision are as follows:

	Fiscal year ended January 31,
	2012			2011			2010
Income tax provision at U.S. Federal statutory rate	$	127.0		$	95.2		$	29.7
State income tax expense (benefit), net of the U.S. Federal benefit	2.8			1.4			(0.6		)
Foreign income taxed at rates different from the U.S. statutory rate	(61.5		)	(39.7		)	(22.7		)
U.S. valuation allowance	1.7			2.8			14.9
Non-deductible stock-based compensation	12.8			7.9			11.7
Research and development tax credit benefit	(6.0		)	(5.6		)	(4.7		)
Tax benefit from closure of income tax audits and decreases in uncertain tax positions	(0.4		)	(2.8		)	(2.5		)
Officer compensation in excess of $1.0 million	1.9			0.5			0.3
Goodwill impairment	—			—			—
Non-deductible in-process research and development charge	—			—			—
Other	(0.7		)	0.3			0.6
	$	77.6		$	60.0		$	26.7

Components of Deferred Tax Assets and Liabilities

Significant components of Autodesk’s deferred tax assets and liabilities are as follows:

	January 31,
	2012			2011
Nonqualified stock options	$	71.6		$	69.0
Research and development tax credit carryforwards	49.3			64.0
Foreign tax credit carryforwards	0.1			16.6
Accrued compensation and benefits	35.6			33.7
Other accruals not currently deductible for tax	31.1			20.8
Purchased technology and capitalized software	20.6			25.3
Fixed assets	15.9			15.1
Tax loss carryforwards	12.4			6.3
Other	3.7			2.6
Total deferred tax assets	240.3			253.4
Less: valuation allowance	(47.5		)	(42.9		)
Net deferred tax assets	192.8			210.5
Tax method change on advanced payments	(6.3		)	(9.4		)
Unremitted earnings of foreign subsidiaries	(20.6		)	(53.6		)
Total deferred tax liability	(26.9		)	(63.0		)
Net deferred tax assets	$	165.9		$	147.5

Unrecognized Tax Benefits Reconciliation, Table

A reconciliation of the beginning and ending amount of the gross unrecognized tax benefits is as follows:

	2012			2011			2010
Gross unrecognized tax benefits at the beginning of the fiscal year	$	188.4		$	178.2		$	169.4
Increases for tax positions of prior years	0.4			2.0			3.1
Decreases for tax positions of prior years	(0.4		)	(3.5		)	(1.9		)
Increases for tax positions related to the current year	14.3			13.9			11.1
Decreases for lapse of statute of limitations/audit settlements	(1.6		)	(2.2		)	(3.5		)
Gross unrecognized tax benefits at the end of the fiscal year	$	201.1		$	188.4		$	178.2

XML

Summary of Restricted Stock Award and Restricted Stock Unit Activity (Detail) (Restricted Stock Awards and Restricted Stock Units, USD $)	12 Months Ended
	Jan. 31, 2012
Restricted Stock Awards and Restricted Stock Units
Unreleased restricted stock
Unreleased restricted stock at January 31, 2011	1,426,800
Granted	1,610,500
Released	(707,600)
Canceled	(145,600)
Unreleased restricted stock at January 31, 2012	2,184,100
Weighted average grant date fair value
Unreleased restricted stock at January 31, 2011	$ 30.43
Granted	$ 37.07
Released	$ 25.95
Forfeited	$ 32.37
Unreleased restricted stock at January 31, 2012	$ 36.65

XML

Business and Summary of Significant Accounting Policies Stock Based Compensation Expense (Details) (USD $) In Millions, unless otherwise specified	3 Months Ended								12 Months Ended
	Jan. 31, 2012	Oct. 31, 2011	Jul. 31, 2011	Apr. 30, 2011	Jan. 31, 2011	Oct. 31, 2010	Jul. 31, 2010	Apr. 30, 2010	Jan. 31, 2012	Jan. 31, 2011	Jan. 31, 2010
Employee Service Share-based Compensation, Allocation of Recognized Period Costs [Line Items]
Stock-based compensation expense related to stock awards and ESP Plan purchases	$ 30.0	$ 25.6	$ 27.3	$ 25.9	$ 18.4	$ 17.0	$ 21.0	$ 24.3	$ 108.8	$ 80.7	$ 93.6
Tax benefit									(27.1)	(22.0)	(22.2)
Stock-based compensation expense related to stock awards and ESP Plan purchases									81.7	58.7	71.4
Cost of license and other revenue
Employee Service Share-based Compensation, Allocation of Recognized Period Costs [Line Items]
Allocated Share-based Compensation Expense									3.9	2.9	3.1
Marketing and sales
Employee Service Share-based Compensation, Allocation of Recognized Period Costs [Line Items]
Allocated Share-based Compensation Expense									48.3	35.5	41.1
Research and development
Employee Service Share-based Compensation, Allocation of Recognized Period Costs [Line Items]
Allocated Share-based Compensation Expense									38.1	27.4	30.0
General and administrative
Employee Service Share-based Compensation, Allocation of Recognized Period Costs [Line Items]
Allocated Share-based Compensation Expense									$ 18.5	$ 14.9	$ 19.4

XML

Commitments and Contingencies (Tables)

12 Months Ended

Jan. 31, 2012

Commitments and Contingencies [Abstract]

Aggregate Future Minimum Lease Payments

At January 31, 2012, the aggregate future minimum lease payments required were as follows:

2013	$	50.8
2014	41.4
2015	34.9
2016	30.0
2017	23.9
Thereafter	59.9
	240.9
Less: Sublease income	3.3
	$	237.6

Rent Expense Related to Operating Leases

Rent expense related to these operating leases recognized on a straight-line basis over the lease period, was as follows:

	Fiscal Year Ended January 31,
	2012		2011		2010
Rent expense	$	53.0	$	52.1	$	56.8

XML

Interest And Other Income, net (Tables)

12 Months Ended

Jan. 31, 2012

Interest and Other Income, net [Abstract]

Interest and Other Income

Interest and other income, net, consists of the following:

	Fiscal Year Ended January 31,
	2012			2011			2010
Interest and investment income, net	$	5.7		$	10.9		$	10.0
Gain (loss) on foreign currency	(1.1		)	(14.0		)	5.0
Other Income	2.7			3.7			4.1
Interest and other income, net	$	7.3		$	0.6		$	19.1

XML

Financial Instruments

12 Months Ended

Jan. 31, 2012

Financial Instruments

Financial Instruments

The following tables summarizes the Company's financial instruments' amortized cost, gross unrealized gains, gross unrealized losses, and fair value by significant investment category as of January 31, 2012 and 2011.

			January 31, 2012
			Amortized Cost		Gross unrealized gains		Gross unrealized losses			Fair Value		Level 1		Level 2		Level 3
Cash equivalents (1):
	Certificates of deposit and time deposits		$	493.6	$	—	$	—		$	493.6	$	11.3	$	482.3	$	—
	Commercial paper		297.9		—		—			297.9		—		297.9		—
	Money market funds		62.1		—		—			62.1		—		62.1		—
Marketable securities:
	Short-term available for sale
		Commercial paper and corporate debt securities	143.7		0.1		—			143.8		35.3		108.5		—
		Certificates of deposit and time deposits	5.2		—		—			5.2		—		5.2		—
		U.S. treasury securities	30.7		—		—			30.7		30.7		—		—
		U.S. government agency securities	38.2		—		—			38.2		38.2		—		—
		Municipal securities	4.7		—		—			4.7		4.7		—		—
		Other	0.3		—		—			0.3		0.3		—		—
	Short-term trading securities
		Mutual funds	29.8		1.8		(0.1		)	31.5		31.5		—		—
	Long-term available for sale
		Corporate debt securities	107.8		1.0		(0.2		)	108.6		108.6		—		—
		U.S. treasury securities	23.6		0.2		—			23.8		23.8		—		—
		U.S. government agency securities	51.4		0.2		—			51.6		51.6		—		—
		Municipal securities	4.6		—		—			4.6		4.6		—		—
		Taxable auction-rate securities	4.2		—		—			4.2		—		—		4.2
Convertible debt securities (2)			18.3		—		—			18.3		—		—		18.3
Derivative contracts (3)			11.6		6.5		(2.2		)	15.9		—		9.7		6.2
		Total	$	1,327.7	$	9.8	$	(2.5	)	$	1,335.0	$	340.6	$	965.7	$	28.7

____________________ 

(1) Included in “Cash and cash equivalents” in the accompanying Consolidated Balance Sheets.

(2) Included in "Other assets" in the accompanying Consolidated Balance Sheets.

(3) Included in “Prepaid expenses and other current assets,” "Other assets," or “Other accrued liabilities” in the accompanying Consolidated Balance Sheets.

			January 31, 2011
			Amortized Cost		Gross unrealized gains		Gross unrealized losses			Fair Value		Level 1		Level 2		Level 3
Cash equivalents (1):
	Certificates of deposit and time deposits		$	383.3	$	—	$	—		$	383.3	$	97.9	$	285.4	$	—
	Commercial paper		331.0		—		—			331.0		—		331.0		—
	Money market funds		43.8		—		—			43.8		—		43.8		—
Marketable securities:
	Short-term available for sale
		Commercial paper and corporate debt securities	47.6		0.1		—			47.7		37.7		10.0		—
		Certificates of deposit and time deposits	29.0		—		—			29.0		25.0		4.0		—
		U.S. treasury securities	26.0		—		—			26.0		26.0		—		—
		U.S. government agency securities	47.2		—		—			47.2		47.2		—		—
		Sovereign debt	9.1		—		—			9.1		—		9.1		—
		Municipal securities	8.6		—		—			8.6		8.6		—		—
		Other	0.3		—		—			0.3		0.3		—		—
	Short-term trading securities
		Mutual funds	29.7		1.7		(0.1		)	31.3		31.3		—		—
	Long-term available for sale
		Corporate debt securities	152.6		1.5		(0.1		)	154.0		154.0		—		—
		U.S. treasury securities	12.7		0.1		—			12.8		12.8		—		—
		U.S. government agency securities	12.7		0.2		—			12.9		12.9		—		—
		Municipal securities	4.7		—		—			4.7		4.7		—		—
		Sovereign debt	3.9		0.1		—			4.0		—		4.0		—
		Taxable auction-rate securities	4.2		—		—			4.2		—		—		4.2
Derivative contracts (2)			3.9		1.9		(1.9		)	3.9		—		3.9		—
		Total	$	1,150.3	$	5.6	$	(2.1	)	$	1,153.8	$	458.4	$	691.2	$	4.2

____________________ 

(1) Included in “Cash and cash equivalents” in the accompanying Consolidated Balance Sheets.

(2) Included in “Prepaid expenses and other current assets,” "Other assets," or “Other accrued liabilities” in the accompanying Consolidated Balance Sheets.

Autodesk classifies its marketable securities as either short-term or long-term based on each instrument’s underlying contractual maturity date. Marketable securities with remaining maturities of less than 12 months are classified as short-term and marketable securities with remaining maturities greater than 12 months are classified as long-term. Autodesk may sell certain of its marketable securities prior to their stated maturities for strategic purposes or in anticipation of credit deterioration.

Autodesk applies fair value accounting for certain financial assets and liabilities, which consist of cash equivalents, marketable securities and other financial instruments, on a recurring basis. The Company defines fair value as the price that would be received from selling an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. Fair value is estimated by applying the following hierarchy, which prioritizes the inputs used to measure fair value into three levels and bases the categorization within the hierarchy upon the lowest level of input that is available and significant to the fair value measurement: (Level 1) observable inputs such as quoted prices in active markets; (Level 2) inputs other than quoted prices in active markets for identical assets and liabilities, quoted prices for identical or similar assets or liabilities in inactive markets, or other inputs that are observable or can be corroborated by observable market data for substantially the full term of the assets or liabilities; and (Level 3) unobservable inputs for which there is little or no market data, which require Autodesk to develop its own assumptions. When determining fair value, Autodesk uses observable market data and relies on unobservable inputs only when observable market data is not available. There have been no transfers between fair value measurement levels during the year ended January 31, 2012.

Autodesk's cash equivalents, marketable securities and financial instruments are primarily classified within Level 1 or Level 2 of the fair value hierarchy. Autodesk values it's available for sale securities on pricing from pricing vendors, who may use quoted prices in active markets for identical assets (Level 1) or inputs other than quoted prices that are observable either directly or indirectly in determining fair value (Level 2). Autodesk's Level 2 securities are valued primarily using observable inputs other than quoted prices in active markets for identical assets and liabilities. Autodesk's Level 3 securities consist of investments held in auction rate securities, convertible debt securities and derivative contracts which are valued using probability weighted discounted cash flow models and some of the inputs to the models are unobservable in the market.

A reconciliation of the change in Autodesk’s Level 3 items for the fiscal years ended January 31, 2012 and 2011 was as follows:

	Fair Value Measurements Using Significant Unobservable Inputs
	(Level 3)
		Derivative Contracts		Convertible Debt Securities		Money Market Funds			Taxable Auction-Rate Securities			Total
Balance at January 31, 2010		$	—	$	—	$	10.0		$	7.6		$	17.6
Transfers into (out of) Level 3		—		—		—			—			—
Redemptions		—		—		(11.7		)	(3.4		)	(15.1		)
Total realized/unrealized gains (losses) included in earnings		—		—		1.7			—			1.7
Balance at January 31, 2011		—		—		—			4.2			4.2
Purchases		6.2		18.3		—			—			24.5
Transfers into (out of) Level 3		—		—		—			—			—
Redemptions		—		—		—			—			—
Total realized/unrealized gains (losses) included in earnings		—		—		—			—			—
Balance at January 31, 2012		$	6.2	$	18.3	$	—		$	4.2		$	28.7

The following table summarizes the estimated fair value of our “available-for-sale securities” classified by the contractual maturity date of the security:

	January 31, 2012
	Cost		Fair Value
Due in 1 year	$	222.8	$	222.9
Due in 1 year through 5 years	205.7		206.9
Due in 5 years through 10 years	—		—
Due after 10 years	4.2		4.2
Total	$	432.7	$	434.0

As of January 31, 2012 and 2011, Autodesk did not have any securities in a continuous unrealized loss position for greater than twelve months.

The sales or redemptions of “available-for-sale securities” in fiscal 2012 and fiscal 2010 resulted in no gains or losses. The sales or redemptions of “available-for-sale securities” for fiscal 2011 resulted in a gain of $1.7 million and no losses. The cost of securities sold is based on the specific identification method. Proceeds from the sale and maturity of marketable securities were $559.1 million in fiscal 2012, $410.7 million in fiscal 2011 and $355.1 million in fiscal 2010.

Derivative Financial Instruments

Under its risk management strategy, Autodesk uses derivative instruments to manage its short-term exposures to fluctuations in foreign currency exchange rates which exist as part of ongoing business operations. Autodesk's general practice is to hedge a majority of transaction exposures denominated in euros, Japanese yen, Swiss francs, British pounds, Canadian dollars and Australian dollars. These instruments have maturities between one to twelve months in the future. Autodesk does not enter into derivative instrument transactions for trading or speculative purposes.

The bank counterparties in all contracts expose Autodesk to credit-related losses in the event of their nonperformance. However, to mitigate that risk, Autodesk only contracts with counterparties who meet the Company's minimum requirements under its counterparty risk assessment process. Autodesk monitors ratings, credit spreads and potential downgrades on at least a quarterly basis. Based on Autodesk's on-going assessment of counterparty risk, the Company will adjust its exposure to various counterparties. Autodesk generally enters into master netting arrangements, which reduce credit risk by permitting net settlement of transactions with the same counterparty.  However, Autodesk does not have any master netting arrangements in place with collateral features.

Foreign currency contracts designated as cash flow hedges

Autodesk utilizes foreign currency contracts to reduce the exchange rate impact on a portion of the net revenue or operating expense of certain anticipated transactions. These contracts are designated and documented as cash flow hedges. The effectiveness of the cash flow hedge contracts is assessed quarterly using regression analysis as well as other timing and probability criteria. To receive cash flow hedge accounting treatment, all hedging relationships are formally documented at the inception of the hedge and the hedges are expected to be highly effective in offsetting changes to future cash flows on hedged transactions. The gross gains and losses on these hedges are included in “Accumulated other comprehensive income (loss)” and are reclassified into earnings at the time the forecasted revenue or expense is recognized. In the event the underlying forecasted transaction does not occur, or it becomes probable that it will not occur, Autodesk reclassifies the gain or loss on the related cash flow hedge from “Accumulated other comprehensive income (loss)” to “Interest and other income (expense), net” in the Company's Consolidated Financial Statements at that time.

The net notional amount of these contracts was $419.6 million at January 31, 2012 and $345.5 million at January 31, 2011. Balances presented below are presented as net settled. Outstanding contracts are recognized as either assets or liabilities on the balance sheet at fair value. The majority of the net gain of $9.2 million remaining in “Accumulated Other Comprehensive Income (Loss)” as of January 31, 2012 is expected to be recognized into earnings within the next twelve months.

Derivatives not designated as hedging instruments

Autodesk uses foreign currency contracts which are not designated as hedging instruments to reduce the exchange rate risk associated primarily with foreign currency denominated receivables and payables. These forward contracts are marked-to-market at the end of each fiscal quarter with gains and losses recognized as “Interest and other income (expense), net.” These derivative instruments do not subject the Company to material balance sheet risk due to exchange rate movements because gains and losses on these derivative instruments are intended to offset the gains or losses resulting from the settlement of the underlying foreign currency denominated receivables and payables. The net notional amounts of these foreign currency contracts were $75.1 million at January 31, 2012 and $56.1 million at January 31, 2011.

In addition to these foreign currency contracts, Autodesk holds derivative instruments issued by privately held companies, which are not designated as hedging instruments. These derivatives consist of certain conversion options on the convertible debt securities held by Autodesk and an option to acquire a privately held company. These derivatives are recorded at fair value as of each balance sheet date and are recorded in “Other assets.” Changes in the fair values of these instruments are recognized in income as “Interest and other income (expense), net.”

Fair Value of Derivative Instruments:

The fair value of derivative instruments in Autodesk’s Consolidated Balance Sheets were as follows as of January 31, 2012 and January 31, 2011:

	Balance Sheet Location	Fair Value at
		January 31, 2012		January 31, 2011
Derivative Assets
Foreign currency contracts designated as cash flow hedges	Prepaid expenses and other current assets	$	11.9	$	5.1
Derivatives not designated as hedging instruments	Other assets	6.2		—
Total derivative assets		$	18.1	$	5.1
Derivative Liabilities
Foreign currency contracts designated as cash flow hedges	Other accrued liabilities	$	2.2	$	1.2
Total derivative liabilities		$	2.2	$	1.2

The effects of derivatives designated as hedging instruments on Autodesk’s Consolidated Statements of Operations were as follows for the fiscal years ended January 31, 2012 and 2011, respectively (amounts presented include any income tax effects):

	Foreign Currency Contracts
	Fiscal Year Ended January 31,
	2012			2011
Amount of gain (loss) recognized in accumulated other comprehensive income ("OCI") on derivatives (effective portion)	$	12.8		$	11.8
Amount and Location of Gain (Loss) Reclassified from Accumulated OCI into Income (Effective Portion)
Net revenue	$	(1.9	)	$	13.0
Operating expenses	4.6			2.1
Total	$	2.7		$	15.1
Amount and Location of Gain (Loss) Recognized in Income on Derivatives (Ineffective Portion and Amount Excluded from Effectiveness Testing)
Interest and other income (expense), net	$	0.3		$	0.1

The effects of derivatives not designated as hedging instruments on Autodesk’s Consolidated Statements of Operations were as follows for the fiscal years ended January 31, 2012 and 2011, respectively (amounts presented include any income tax effects):

	Foreign Exchange Contracts
	Fiscal Year Ended January 31,
	2012			2011
Amount and Location of Gain (Loss) Recognized in Income on Derivative
Interest and other income, net	$	(1.3	)	$	2.3

XML

Accumulated Other Comprehensive Income , Net of Taxes (Tables)

12 Months Ended

Jan. 31, 2012

Accumulated Other Comprehensive Income (loss) [Abstract]

Schedule of Accumulated Other Comprehensive Income (Loss)

Accumulated other comprehensive income (loss), net of taxes, was comprised of the following at January 31:

	January 31,
	2012			2011			2010
Net gain (loss) on derivative instruments	$	9.2		$	(0.8	)	$	2.3
Net unrealized gain on available-for-sale securities	2.6			2.4			1.5
Unfunded portion of pension plans	(8.6		)	(9.8		)	(5.9		)
Foreign currency translation adjustments	2.7			7.6			(1.4		)
Accumulated other comprehensive income (loss)	$	5.9		$	(0.6	)	$	(3.5	)

XML

Business and Summary of Significant Accounting Policies Other Intangible Assets and Related Accumulated Amortization (Details) (USD $) In Millions, unless otherwise specified	Jan. 31, 2012		Jan. 31, 2011
Finite-Lived Intangible Assets [Line Items]
Purchased technologies, at cost	$ 378.7	[1]	$ 313.1	[1]
Customer relationships, trade names, patents, and user lists, at cost	215.3	[2]	179.1	[2]
Finite-Lived Intangible Assets, Gross	594.0		492.2
Less: Accumulated amortization	(445.2)		(373.4)
Other intangible assets, net	$ 148.8		$ 118.8

[1] Purchased technologies include $1.2 million and zero of in-process research and development technology as of January 31, 2012 and January 31, 2011, respectively. In-process research and development is an indefinite lived asset that is held and tested at least annually for impairment until such time that it becomes fully developed technology. Once development is completed, the technology is amortized to expense over an applicable useful life.

[2] Included as a net balance in “Other assets” in the Consolidated Balance Sheet. Customer relationships and trade names include the effects of foreign currency translation.

XML

Schedule Of Share-based Compensation Options Activity (Detail) (USD $) In Millions, except Per Share data, unless otherwise specified	12 Months Ended
	Jan. 31, 2012
Share-based Compensation Arrangement by Share-based Payment Award [Line Items]
Share based compensation arrangement by share based payment award options expiration term	8
Number of Shares
Options outstanding at January 31, 2011	30.4
Granted	5.4
Exercised	(5.3)
Cancelled	(2.1)
Options outstanding at January 31, 2012	28.4
Options exercisable at January 31, 2012	16.7
Options vested and exercisable as of January 31, 2012	27.7	[1]
Options available for grant at January 31, 2012	18.0
Weighted average price per share
Options outstanding at January 31, 2011	$ 28.93
Granted	$ 40.71
Exercised	$ 24.85
Cancelled	$ 36.29
Options outstanding at January 31, 2012	$ 31.39
Options exercisable at January 31, 2012	$ 30.98
Share-based Compensation Arrangement by Share-based Payment Award, Options, Vested and Expected to Vest, Outstanding, Weighted Average Exercise Price	$ 31.25	[1]
Outside directors stock plan 2012
Share-based Compensation Arrangement by Share-based Payment Award [Line Items]
Share based compensation arrangement by share based payment award options expiration term	7
Maximum | Employee Stock Plan 2012
Share-based Compensation Arrangement by Share-based Payment Award [Line Items]
Share based compensation arrangement by share based payment award options expiration term	10

[1] Options expected to vest reflect an estimated forfeiture rate. The weighted average remaining contractual life for these options is 3.9 years and the aggregate intrinsic value is $199.3 million.

XML

Accumulated Other Comprehensive Income (Loss), Net of Taxes (Detail) (USD $) In Millions, unless otherwise specified	Jan. 31, 2012	Jan. 31, 2011	Jan. 31, 2010
Disclosure - Accumulated Other Comprehensive Income (Loss), Net of Taxes [Abstract]
Net gain (loss) on derivative instruments	$ 9.2	$ (0.8)	$ 2.3
Net unrealized gain on available-for-sale securities	2.6	2.4	1.5
Unfunded portion of pension plans	(8.6)	(9.8)	(5.9)
Foreign currency translation adjustments	2.7	7.6	(1.4)
Accumulated other comprehensive income (loss)	$ 5.9	$ (0.6)	$ (3.5)

XML

CONSOLIDATED STATEMENTS OF OPERATIONS (USD $) In Millions, except Per Share data, unless otherwise specified	12 Months Ended
	Jan. 31, 2012	Jan. 31, 2011	Jan. 31, 2010
Net revenue:
License and other	$ 1,357.6	$ 1,172.1	$ 980.7
Maintenance	858.0	779.7	733.0
Total net revenue	2,215.6	1,951.8	1,713.7
Cost of revenue:
Cost of license and other revenue	187.1	162.2	172.0
Cost of maintenance revenue	42.0	34.4	19.8
Total cost of revenue	229.1	196.6	191.8
Gross profit	1,986.5	1,755.2	1,521.9
Operating expenses:
Marketing and sales	842.6	776.0	731.9
Research and development	566.5	496.2	457.5
General and administrative	223.1	200.8	197.7
Impairment of goodwill	0	0	21.0
Restructuring (benefits) charges	(1.3)	10.8	48.2
Total operating expenses	1,630.9	1,483.8	1,456.3
Income from operations	355.6	271.4	65.6
Interest and other income, net	7.3	0.6	19.1
Income before income taxes	362.9	272.0	84.7
Provision for income taxes	(77.6)	(60.0)	(26.7)
Net income	$ 285.3	$ 212.0	$ 58.0
Basic net income per share	$ 1.25	$ 0.93	$ 0.25
Diluted net income per share	$ 1.22	$ 0.90	$ 0.25
Weighted average shares used in computing basic net income per share	227.7	227.6	228.7
Weighted average shares used in computing diluted net income per share	233.3	234.2	232.1

XML

Assumption Used to Estimate the Fair Value of Stock-Based Awards (Detail)	12 Months Ended
	Jan. 31, 2012	Jan. 31, 2011	Jan. 31, 2010
Stock Option Plans
Share based Compensation Arrangement by Share based Payment Award, Fair Value Assumptions, Method Used [Line Items]
Expected dividends	0.00%	0.00%	0.00%
ESP Plan
Share based Compensation Arrangement by Share based Payment Award, Fair Value Assumptions, Method Used [Line Items]
Expected dividends	0.00%	0.00%	0.00%
Employee Qualified Stock Purchase Plan 1998 ESP Plan | Minimum
Share based Compensation Arrangement by Share based Payment Award, Fair Value Assumptions, Method Used [Line Items]
Range of expected volatilities	34.00%	33.00%	43.00%
Range of expected lives (in years)	0.5	0.5	0.5
Range of risk-free interest rates	0.10%	0.20%	0.20%
Expected forfeitures	7.80%	10.50%	13.50%
Employee Qualified Stock Purchase Plan 1998 ESP Plan | Maximum
Share based Compensation Arrangement by Share based Payment Award, Fair Value Assumptions, Method Used [Line Items]
Range of expected volatilities	44.00%	47.00%	73.00%
Range of expected lives (in years)	2	2	2
Range of risk-free interest rates	0.80%	1.10%	1.00%
Expected forfeitures	10.50%	13.50%
Employee Stock Option Member | Minimum
Share based Compensation Arrangement by Share based Payment Award, Fair Value Assumptions, Method Used [Line Items]
Range of expected volatilities	40.00%	40.00%	43.00%
Range of expected lives (in years)	2.6	2.6	2.7
Range of risk-free interest rates	0.50%	0.80%	1.00%
Expected forfeitures	7.80%	10.50%	13.50%
Employee Stock Option Member | Maximum
Share based Compensation Arrangement by Share based Payment Award, Fair Value Assumptions, Method Used [Line Items]
Range of expected volatilities	49.00%	45.00%	55.00%
Range of expected lives (in years)	4.8	4.4	4
Range of risk-free interest rates	1.90%	1.90%	2.40%
Expected forfeitures	10.50%	13.50%

XML

CONSOLIDATED STATEMENTS OF STOCKHOLDERS' EQUITY (USD $) In Millions, except Share data	Total	Common stock and additional paid-in-capital	Comprehensive Income	Accumulated other comprehensive income (loss)	Retained earnings	Total stockholders' equity
Balance at Jan. 31, 2009		$ 1,080.4		$ (11.2)	$ 241.5	$ 1,310.7
Balance (in shares) at Jan. 31, 2009		226,400,000
Common shares issued under stock award and stock purchase plans, Shares		5,200,000		0	0	70,400,000
Common shares issued under stock award and stock purchase plans, Value		70.4
Compensation expense related to stock options		93.6				93.6
Tax benefits from employee stock plans		(3.7)				(3.7)
Net income	58.0		58.0		58.0	58.0
Net loss on derivative instruments, net of taxes			2.5
Change in net unrealized gain on marketable securities, net of tax			1.5
Change in unfunded portion of pension plans			(5.9)
Net change in cumulative foreign currency translation loss			9.6
Other Comprehensive Income (Loss), Net of Tax			7.7	7.7		7.7
Comprehensive Income (Loss), Net of Tax, Attributable to Parent			65.7
Stock Repurchased and Retired During Period, Shares	(2,700,000)	(2,700,000)
Stock Repurchased and Retired During Period, Value		(36.4)			(26.8)	(63.2)
Balances at Jan. 31, 2010		1,204.3		(3.5)	272.7	1,473.5
Balance (in shares) at Jan. 31, 2010		228,900,000
Common shares issued under stock award and stock purchase plans, Shares		7,100,000
Common shares issued under stock award and stock purchase plans, Value		120.9				120.9
Compensation expense related to stock options		80.7				80.7
Tax benefits from employee stock plans		(0.4)				(0.4)
Net income	212.0		212.0		212.0	212.0
Net loss on derivative instruments, net of taxes			(3.1)
Change in net unrealized gain on marketable securities, net of tax			0.9
Change in unfunded portion of pension plans			(3.9)
Net change in cumulative foreign currency translation loss			9.0
Other Comprehensive Income (Loss), Net of Tax			2.9	2.9		2.9
Comprehensive Income (Loss), Net of Tax, Attributable to Parent			214.9
Stock Repurchased and Retired During Period, Shares	(9,000,000)	(9,000,000)
Stock Repurchased and Retired During Period, Value		(138.3)			(142.0)	(280.3)
Balances at Jan. 31, 2011	1,609.3	1,267.2		(0.6)	342.7	1,609.3
Balance (in shares) at Jan. 31, 2011	227	227,000,000
Common shares issued under stock award and stock purchase plans, Shares		8,600,000
Common shares issued under stock award and stock purchase plans, Value		176.1				176.1
Compensation expense related to stock options		108.8				108.8
Tax benefits from employee stock plans		24.3				24.3
Net income	285.3		285.3		285.3	285.3
Net loss on derivative instruments, net of taxes			10.0
Change in net unrealized gain on marketable securities, net of tax			0.2
Change in unfunded portion of pension plans			1.2
Net change in cumulative foreign currency translation loss			(4.9)
Other Comprehensive Income (Loss), Net of Tax			6.5	6.5		6.5
Comprehensive Income (Loss), Net of Tax, Attributable to Parent			291.8
Stock Repurchased and Retired During Period, Shares	(9,700,000)	(9,700,000)
Stock Repurchased and Retired During Period, Value		(211.0)			(116.4)	(327.4)
Balances at Jan. 31, 2012	$ 1,882.9	$ 1,365.4		$ 5.9	$ 511.6	$ 1,882.9
Balance (in shares) at Jan. 31, 2012	226	225,900,000

XML

Income Taxes Provision for income taxes (Details) (USD $) In Millions, unless otherwise specified	3 Months Ended								12 Months Ended
	Jan. 31, 2012	Oct. 31, 2011	Jul. 31, 2011	Apr. 30, 2011	Jan. 31, 2011	Oct. 31, 2010	Jul. 31, 2010	Apr. 30, 2010	Jan. 31, 2012	Jan. 31, 2011	Jan. 31, 2010
Federal
Current									$ 54.3	$ 16.0	$ 12.3
Deferred									(34.5)	(8.2)	(33.0)
State
Current									4.9	(1.5)	3.0
Deferred									1.3	7.4	7.1
Foreign
Current									55.9	48.4	34.1
Deferred									(4.3)	(2.1)	3.2
Income Tax Expense (Benefit)	$ 20.9	$ 18.5	$ 23.0	$ 15.2	$ 11.4	$ 18.1	$ 20.0	$ 10.5	$ 77.6	$ 60.0	$ 26.7

XML

Restructuring Reserve (Tables)

12 Months Ended

Jan. 31, 2012

Notes to Financial Statements [Abstract]

Schedule of Restructuring Reserve by Type of Cost

The following table sets forth the restructuring activities for the fiscal years ended January 31, 2012 and 2011.

	Balances, January 31, 2011		Additions		Payments			Adjustments(1)			Balances, January 31, 2012
Fiscal 2011 Plan
Employee termination costs	$	1.5	$	—	$	(1.5	)	$	—		$	—
Fiscal 2010 Plan
Employee termination costs	—		—								—
Lease termination and asset costs	1.7		—		(1.1		)	(0.3		)	0.3
Fiscal 2009 Plan
Employee termination costs	—		—		—			—			—
Lease termination and asset costs	2.8		—		(0.9		)	(1.3		)	0.6
Other
Employee termination costs	—		—		—			—			—
Lease termination costs	2.6		—		(0.8		)	(0.3		)	1.5
Total	$	8.6	$	—	$	(4.3	)	$	(1.9	)	$	2.4
Current portion(2)	$	4.8									$	1.1
Non-current portion(2)	3.8										1.3
Total	$	8.6									$	2.4

____________________

(1) Adjustments include the impact of foreign currency translation.

(2) The current and non-current portions of the reserve are recorded in the Consolidated Balance Sheets under “Other accrued liabilities” and “Other liabilities,” respectively.

	Balances, January 31, 2010		Additions		Payments			Adjustments(1)			Balances, January 31, 2011
Fiscal 2011 Plan
Employee termination costs	$	—	$	12.4	$	(10.6	)	$	(0.3	)	$	1.5
Fiscal 2010 Plan
Employee termination costs	0.8		—		(0.8		)	—			—
Lease termination and asset costs	6.1		0.3		(4.3		)	(0.4		)	1.7
Fiscal 2009 Plan
Employee termination costs	1.0		—		(0.2		)	(0.8		)	—
Lease termination and asset costs	8.2		1.0		(4.6		)	(1.8		)	2.8
Other
Employee termination costs	0.4		—		(0.3		)	(0.1		)	—
Lease termination costs	2.9		—		(0.2		)	(0.1		)	2.6
Total	$	19.4	$	13.7	$	(21.0	)	$	(3.5	)	$	8.6
Current portion(2)	$	11.4									$	4.8
Non-current portion(2)	8.0										3.8
Total	$	19.4									$	8.6

____________________

(1) Adjustments include the impact of foreign currency translation.

(2) The current and non-current portions of the reserve are recorded in the Consolidated Balance Sheets under “Other accrued liabilities” and “Other liabilities,” respectively.

XML

Summary of Fair Value of Assets Acquired and Liabilities Assumed by Major Class (Detail) (USD $) In Millions, unless otherwise specified	12 Months Ended
	Jan. 31, 2012	Aug. 24, 2011	Aug. 24, 2011 Customer relationships	Aug. 24, 2011 Trade name	Aug. 24, 2011 User List	Aug. 24, 2011 Patent	Mar. 01, 2011 Scaleform Corporation	Mar. 01, 2011 Scaleform Corporation Developed technologies	Mar. 01, 2011 Scaleform Corporation Customer relationships	Mar. 01, 2011 Scaleform Corporation Trade name	Mar. 01, 2011 Scaleform Corporation User List	Mar. 01, 2011 Scaleform Corporation Patent	Mar. 10, 2011 Blue Ridge Numerics, Inc	Mar. 10, 2011 Blue Ridge Numerics, Inc Developed technologies	Mar. 10, 2011 Blue Ridge Numerics, Inc Customer relationships	Mar. 10, 2011 Blue Ridge Numerics, Inc Trade name	Mar. 10, 2011 Blue Ridge Numerics, Inc User List	Mar. 10, 2011 Blue Ridge Numerics, Inc Patent	Aug. 02, 2011 Instructables Corporation	Aug. 02, 2011 Instructables Corporation Developed technologies	Aug. 02, 2011 Instructables Corporation Customer relationships	Aug. 02, 2011 Instructables Corporation Trade name	Aug. 02, 2011 Instructables Corporation User List	Aug. 02, 2011 Instructables Corporation Patent	Oct. 14, 2011 Micro Application Packages Limited	Oct. 14, 2011 Micro Application Packages Limited Developed technologies	Oct. 14, 2011 Micro Application Packages Limited Customer relationships	Oct. 14, 2011 Micro Application Packages Limited Trade name	Oct. 14, 2011 Micro Application Packages Limited User List	Oct. 14, 2011 Micro Application Packages Limited Patent	Dec. 21, 2011 T-splines	Dec. 21, 2011 T-splines Developed technologies	Dec. 21, 2011 T-splines Customer relationships	Dec. 21, 2011 T-splines Trade name	Dec. 21, 2011 T-splines User List	Dec. 21, 2011 T-splines Patent	Jan. 31, 2012 Series of Individually Immaterial Business Acquisitions	Jan. 31, 2012 Series of Individually Immaterial Business Acquisitions Developed technologies	Jan. 31, 2012 Series of Individually Immaterial Business Acquisitions Customer relationships	Jan. 31, 2012 Series of Individually Immaterial Business Acquisitions Trade name	Jan. 31, 2012 Series of Individually Immaterial Business Acquisitions User List	Jan. 31, 2012 Series of Individually Immaterial Business Acquisitions Patent	Aug. 24, 2011 TurboSquid Corporation	Aug. 24, 2011 TurboSquid Corporation Developed technologies	Jan. 31, 2012 Other Entities Acquired
Business Acquisition [Line Items]
Intangible assets			$ 0	$ 0	$ 0	$ 0		$ 5.9	$ 4.4	$ 1.4	$ 0	$ 3.6		$ 6.0	$ 9.2	$ 1.1	$ 0	$ 0		$ 0.4	$ 0.2	$ 1.6	$ 5.1	$ 0		$ 2.5	$ 2.0	$ 0.9	$ 0	$ 0		$ 2.1	$ 0.7	$ 0.4	$ 0	$ 0		$ 21.7	$ 3.9	$ 1.2	$ 0	$ 0		$ 26.0
In-process research and development		0					0.6						0.6						0						0						0						0
Goodwill		0					22.6						22.3						24.4						12.7						19.8						28.3
Deferred Revenue		0					0						(1.2)						0						0						0						0
Deferred tax liability		0					(2.5)						(3.6)						(1.6)						(1.6)						0						0.2
Net tangible assets (liabilities)		0					0.2						6.8						0.1						6.5						0						(0.5)
Business Acquisition, Cost of Acquired Entity, Purchase Price							$ 36.2						$ 41.2						$ 30.2						$ 23.0						$ 23.0						$ 54.8						$ 26.0		$ 13.5
Number of Businesses Acquired	2

XML

Selected Quarterly Financial Information

12 Months Ended

Jan. 31, 2012

Selected Quarterly Financial Information (Unaudited) [Abstract]

Quarterly Financial Information

Selected Quarterly Financial Information (Unaudited)

Summarized quarterly financial information for fiscal 2012 and 2011 is as follows:

2012	1st quarter			2nd quarter			3rd quarter			4th quarter			Fiscal year
Net revenue	$	528.3		$	546.3		$	548.6		$	592.4		$	2,215.6
Gross profit	473.7			488.9			489.0			534.9			1,986.5
Income from operations	78.6			95.0			90.2			91.8			355.6
Provision for income taxes	(15.2		)	(23.0		)	(18.5		)	(20.9		)	(77.6		)
Net income	69.3			71.2			72.8			72.0			285.3
Basic net income per share	$	0.30		$	0.31		$	0.32		$	0.32		$	1.25
Diluted net income per share	$	0.29		$	0.30		$	0.32		$	0.31		$	1.22
Income from operations includes the following items:
Stock-based compensation expense	$	25.9		$	27.3		$	25.6		$	30.0		$	108.8
Amortization of acquisition related intangibles	14.6			17.8			19.3			18.6			70.3
Restructuring benefits	—			(1.3		)	—			—			(1.3		)
2011	1st quarter			2nd quarter			3rd quarter			4th quarter			Fiscal year
Net revenue	$	474.6		$	472.8		$	476.7		$	527.7		$	1,951.8
Gross profit	423.3			424.4			428.2			479.3			1,755.2
Income from operations	50.8			79.8			69.2			71.6			271.4
Provision for income taxes	(10.5		)	(20.0		)	(18.1		)	(11.4		)	(60.0		)
Net income	36.9			59.9			53.6			61.6			212.0
Basic net income per share	$	0.16		$	0.26		$	0.24		$	0.27		$	0.93
Diluted net income per share	$	0.16		$	0.25		$	0.23		$	0.26		$	0.90
Income from operations includes the following items:
Stock-based compensation expense	$	24.3		$	21.0		$	17.0		$	18.4		$	80.7
Amortization of acquisition related intangibles	13.9			13.6			14.1			14.3			55.9
Restructuring charges	7.1			1.9			—			1.8			10.8

XML

Selected Quarterly Financial Information (Tables)

12 Months Ended

Jan. 31, 2012

Selected Quarterly Financial Information (Unaudited) [Abstract]

Quarterly Financial Information

Summarized quarterly financial information for fiscal 2012 and 2011 is as follows:

2012	1st quarter			2nd quarter			3rd quarter			4th quarter			Fiscal year
Net revenue	$	528.3		$	546.3		$	548.6		$	592.4		$	2,215.6
Gross profit	473.7			488.9			489.0			534.9			1,986.5
Income from operations	78.6			95.0			90.2			91.8			355.6
Provision for income taxes	(15.2		)	(23.0		)	(18.5		)	(20.9		)	(77.6		)
Net income	69.3			71.2			72.8			72.0			285.3
Basic net income per share	$	0.30		$	0.31		$	0.32		$	0.32		$	1.25
Diluted net income per share	$	0.29		$	0.30		$	0.32		$	0.31		$	1.22
Income from operations includes the following items:
Stock-based compensation expense	$	25.9		$	27.3		$	25.6		$	30.0		$	108.8
Amortization of acquisition related intangibles	14.6			17.8			19.3			18.6			70.3
Restructuring benefits	—			(1.3		)	—			—			(1.3		)
2011	1st quarter			2nd quarter			3rd quarter			4th quarter			Fiscal year
Net revenue	$	474.6		$	472.8		$	476.7		$	527.7		$	1,951.8
Gross profit	423.3			424.4			428.2			479.3			1,755.2
Income from operations	50.8			79.8			69.2			71.6			271.4
Provision for income taxes	(10.5		)	(20.0		)	(18.1		)	(11.4		)	(60.0		)
Net income	36.9			59.9			53.6			61.6			212.0
Basic net income per share	$	0.16		$	0.26		$	0.24		$	0.27		$	0.93
Diluted net income per share	$	0.16		$	0.25		$	0.23		$	0.26		$	0.90
Income from operations includes the following items:
Stock-based compensation expense	$	24.3		$	21.0		$	17.0		$	18.4		$	80.7
Amortization of acquisition related intangibles	13.9			13.6			14.1			14.3			55.9
Restructuring charges	7.1			1.9			—			1.8			10.8

XML

Business and Summary of Significant Accounting Policies (Policies)

12 Months Ended

Jan. 31, 2012

Business and Summary of Significant Accounting Policies [Abstract]

Business, Policy

Business

Autodesk, Inc. (“Autodesk” or the “Company”) is a world leading design software and services company, offering customers productive business solutions through powerful technology products and services. The Company serves customers in the architecture, engineering and construction; manufacturing; and digital media and entertainment industries. The Company’s sophisticated software products enable its customers to experience their ideas before they are real by allowing them to imagine, design, and create their ideas and to visualize, simulate and analyze real-world performance early in the design process by creating digital prototypes. These capabilities allow Autodesk’s customers to optimize and improve their designs, help save time and money, improve quality and foster innovation. Autodesk software products are sold globally, both directly to customers and through a network of resellers and distributors

Principles of Consolidation, Policy

Principles of Consolidation

The accompanying consolidated financial statements include the accounts of Autodesk and its wholly-owned and majority-owned subsidiaries. All significant intercompany accounts and transactions have been eliminated

Use of Estimates, Policy

Use of Estimates

The preparation of financial statements in conformity with generally accepted accounting principles requires management to make estimates and assumptions that affect the amounts reported in Autodesk’s consolidated financial statements and notes thereto. These estimates are based on information available as of the date of the consolidated financial statements. On a regular basis, management evaluates these estimates and assumptions. Actual results may differ materially from these estimates.

Examples of significant estimates and assumptions made by management involve the determination of the fair value of goodwill, financial instruments, long-lived assets and other intangible assets, the realizability of deferred tax assets and the fair value of stock awards (see “Stock-Based Compensation Expense” within this Note 1 and Note 3 “Employee and Director Stock Plans,” for further discussion). The Company also make assumptions, judgments and estimates in determining the accruals for uncertain tax positions, variable compensation, partner incentive programs, product returns reserves, allowances for doubtful accounts, asset retirement obligations and legal contingencies.

Foreign Currency Translation Policy

Foreign Currency Translation

The assets and liabilities of Autodesk’s foreign subsidiaries are translated from their respective functional currencies into U.S. dollars at the rates in effect at the balance sheet date, and revenue and expense amounts are translated at weighted average rates during the period. Foreign currency translation adjustments are recorded as other comprehensive income (loss).

Gains and losses realized from foreign currency transactions, those transactions denominated in currencies other than the foreign subsidiary’s functional currency, are included in interest and other income, net.

Derivatives, Policy

Derivative Financial Instruments

Under its risk management strategy, Autodesk uses derivative instruments to manage its short-term exposures to fluctuations in foreign currency exchange rates which exist as part of ongoing business operations. Autodesk’s general practice is to hedge a majority of transaction exposures denominated in euros, Japanese yen, Swiss francs, British pounds, Canadian dollars, and Australian dollars. These instruments have maturities between one to 12 months in the future. Autodesk does not enter into any derivative instruments for trading or speculative purposes.

The bank counterparties in all contracts expose Autodesk to credit-related losses in the event of their nonperformance. However, to mitigate that risk, Autodesk only contracts with counterparties who meet the Company’s minimum requirements under its counterparty risk assessment process. Autodesk monitors ratings, credit spreads and potential downgrades on at least a quarterly basis. Based on Autodesk’s on-going assessment of counterparty risk, the Company will adjust its exposure to various counterparties. Autodesk generally enters into master netting arrangements, which reduce credit risk by permitting net settlement of transactions with the same counterparty. However, Autodesk does not have any master netting arrangements in place with collateral features.

Autodesk accounts for its derivative instruments as either assets or liabilities on the balance sheet and carries them at fair value. Gains and losses resulting from changes in fair value are accounted for depending on the use of the derivative and whether it is designated and qualifies for hedge accounting. Derivatives that do not qualify for hedge accounting are adjusted to fair value through earnings. See Note 2, "Financial Instruments" for information regarding Autodesk's hedging activities.

Cash and Cash Equivalents, Policy

Cash and Cash Equivalents

Autodesk considers all highly liquid investments with insignificant interest rate risk and remaining maturities of three months or less at the date of purchase to be cash equivalents. Cash equivalents are recorded at cost, which approximates fair value.

Marketable Securities, Policy

Marketable Securities

Marketable securities are stated at fair value. Marketable securities maturing within one year that are not restricted are classified as current assets.

Autodesk determines the appropriate classification of its marketable securities at the time of purchase and re-evaluates such classification as of each balance sheet date. Autodesk carries all “available-for-sale securities” at fair value, with unrealized gains and losses, net of tax, reported in stockholders’ equity until disposition or maturity. Autodesk carries all “trading securities” at fair value, with unrealized gains and losses, recorded in “Interest and other income, net” in the Company’s Consolidated Statements of Operations.

All of Autodesk’s marketable securities are subject to a periodic impairment review. The Company recognizes an impairment charge when a decline in the fair value of its investments below the cost basis is judged to be other-than-temporary. Autodesk considers various factors in determining whether to recognize an impairment charge, including the length of time and extent to which the fair value has been less than Autodesk’s cost basis, the financial condition and near-term prospects of the investee, and Autodesk’s intent and ability to hold the investment for a period of time sufficient to allow for any anticipated recovery in the market value. Autodesk did not record any other-than temporary impairment charges during fiscal 2012 and fiscal 2011. For additional information, see “Concentration of Credit Risk” within this Note 1 and Note 2, “Financial Instruments.”

Accounts Receivable, Net, Policy

Accounts Receivable, Net

Accounts receivable, net, consisted of the following as of January 31:

	2012			2011
Trade accounts receivable	$	433.9		$	363.0
Less: Allowance for doubtful accounts	(5.5		)	(4.2		)
Product returns reserve	(5.8		)	(10.6		)
Partner programs and other obligations	(27.5		)	(29.8		)
Accounts receivable, net	$	395.1		$	318.4

Allowances for uncollectible trade receivables are based upon historical loss patterns, the number of days that billings are past due and an evaluation of the potential risk of loss associated with problem accounts.

The product returns reserves are based on historical experience of actual product returns, estimated channel inventory levels, the timing of new product introductions, channel sell-in for applicable markets and other factors.

Partner program and other obligations are primarily related to partner incentives that use quarterly attainment monetary rewards to motivate distributors and resellers to achieve mutually agreed upon business goals in a specified time period.

Concentration of Credit Risk, Policy

Concentration of Credit Risk

Autodesk places its cash, cash equivalents and marketable securities in highly liquid instruments with, and in the custody of, financial institutions with high credit ratings and limits the amounts invested with any one institution, type of security and issuer.

Geographical concentrations of consolidated cash, cash equivalents and marketable securities held by Autodesk as of January 31:

	2012		2011
United States	11	%	14	%
Other Americas	1	%	1	%
Europe, Middle East and Africa (“EMEA”)	51	%	49	%
Asia Pacific (“APAC”)	37	%	36	%

Autodesk's primary commercial banking relationship is with Citibank and its global affiliates (“Citibank”). The Company's cash and cash equivalents are held by diversified financial institutions globally. Citicorp USA, Inc., an affiliate of Citibank, is one of the lead lenders and agent in the syndicate of Autodesk's $400.0 million line of credit facility.

Autodesk’s accounts receivable are derived from sales to a large number of resellers, distributors and direct customers in the Americas; EMEA; and APAC geographies. Autodesk performs ongoing evaluations of its customers’ financial condition and limits the amount of credit extended when deemed necessary, but generally does not require collateral from such parties. Total sales to the Company's largest distributor Tech Data Corporation, and its global affiliates (“Tech Data”), accounted for 17%, 16% and 14% of our net revenue for fiscal years ended 2012, 2011 and 2010, respectively. The majority of the net revenue from sales to Tech Data relates to Autodesk's Platform Solutions and Emerging Business segment and is for sales made outside of the United States. In addition, Tech Data accounted for 21% and 16% of trade accounts receivable at January 31, 2012 and 2011, respectively. In October 2011, Tech Data purchased certain assets of Mensch and Maschine Software (“MuM”), which has been a distributor of our products in Europe. The acquisition concentrates additional sales through Tech Data, which on a consolidated basis would have accounted for 21%, 22% and 21% of our net revenue for fiscal years 2012, 2011 and 2010, if the acquisition had taken place at the beginning of fiscal 2010.

Computer Equipment, Software, Furniture and Leasehold Improvements, Net, Policy

Computer Equipment, Software, Furniture and Leasehold Improvements, Net

Computer equipment, software and furniture are depreciated using the straight-line method over the estimated useful lives of the assets, which range from three to five years. Leasehold improvements are amortized on a straight-line basis over the shorter of their estimated useful lives or the lease term. Depreciation expense was $43.7 million in fiscal 2012, $47.6 million in fiscal 2011 and $50.4 million in fiscal 2010.

Computer equipment, software, furniture, leasehold improvements and the related accumulated depreciation at January 31 were as follows:

	2012			2011
Computer software, at cost	$	133.5		$	129.4
Computer hardware, at cost	153.3			123.7
Leasehold improvements, land and buildings, at cost	139.5			121.3
Furniture and equipment, at cost	47.7			43.6
	474.0			418.0
Less: Accumulated depreciation	(369.5		)	(333.5		)
Computer software, hardware, leasehold improvements, furniture and equipment, net	$	104.5		$	84.5

Costs incurred for computer software developed or obtained for internal use are capitalized for application development activities, if material, and immediately expensed for preliminary project activities and post-implementation activities. These capitalized costs are amortized over the software’s expected useful life, which is generally three years.

Software Development Costs, Policy

Software Development Costs

Software development costs incurred prior to the establishment of technological feasibility are included in research and development expenses. Autodesk defines establishment of technological feasibility as the completion of a working model. Software development costs incurred subsequent to the establishment of technological feasibility through the period of general market availability of the products are capitalized and generally amortized over a one year period, if material. Autodesk had no capitalized software development costs at January 31, 2012 and January 31, 2011.

Other Intangible Assets, Policy

Expected future amortization expense for purchased technologies, customer relationships and trade names for each of the fiscal years ended thereafter is as follows:

	Year ending January 31,
2013	$	65.7
2014	47.1
2015	25.5
2016	7.9
2017	1.0
Thereafter	1.6
Total	$	148.8

Goodwill, Policy

Goodwill

Goodwill consists of the excess of cost over the fair value of net assets acquired in business combinations. Autodesk assigns goodwill to the reportable segment associated with each business combination, and tests goodwill for impairment annually in its fourth fiscal quarter or more often if circumstances indicate a potential impairment. When assessing goodwill for impairment, Autodesk uses discounted cash flow models that include assumptions regarding reportable segments’ projected cash flows (“Income Approach”) and corroborates it with the estimated consideration that the Company would receive if there were to be a sale of the reporting segment (“Market Approach”). Variances in these assumptions could have a significant impact on Autodesk’s conclusion as to whether goodwill is impaired or the amount of any impairment charge. Impairment charges, if any, result from instances where the fair values of net assets associated with goodwill are less than their carrying values. The process of evaluating the potential impairment of goodwill is subjective and requires significant judgment at many points during the analysis. The value of Autodesk’s goodwill could also be impacted by future adverse changes such as: (i) declines in Autodesk’s actual financial results, (ii) a sustained decline in Autodesk’s market capitalization, (iii) significant slowdown in the worldwide economy or the industries Autodesk serves, or (iv) changes in Autodesk’s business strategy or internal financial results forecasts. There was no impairment of goodwill during the year ended January 31, 2012. A hypothetical 10%decrease in the fair value of Autodesk’s Platform Solutions and Emerging Business; Manufacturing; Architecture, Engineering and Construction; or Media and Entertainment reporting units would not have an impact on the carrying value, nor result in an impairment, of goodwill shown on Autodesk’s balance sheet as of January 31, 2012 for the respective reporting units.

During the fiscal year ended 2010, Autodesk recorded an impairment charge of $21.0 million, representing the entire goodwill balance of the Media and Entertainment (“M&E”) segment as of April 30, 2009. Should revenue and cash flow projections decline significantly in the future, additional impairment charges may be recorded to goodwill.

The change in the carrying amount of goodwill during the year ended January 31, 2012 is as follows:

	Platform Solutions and Emerging Business			Architecture, Engineering and Construction			Manufacturing		Media and Entertainment			Total
Balance as of January 31, 2011
Goodwill	$	45.3		$	224.2		$	279.1	$	154.7		$	703.3
Accumulated impairment losses	—			—			—		(149.2		)	(149.2		)
	45.3			224.2			279.1		5.5			554.1
Scaleform acquisition	—			—			—		22.6			22.6
Blue Ridge acquisition	—			—			22.3		—			22.3
Instructables acquisition	24.4			—			—		—			24.4
Micro Application Packages Limited acquisition	—			12.7			—		—			12.7
T-Splines acquisition	—			—			19.8		—			19.8
Goodwill acquired from other acquisitions	7.6			12.0			2.0		6.7			28.3
Effect of foreign currency translation, purchase accounting adjustments and other	(0.7		)	(1.2		)	0.1		—			(1.8		)
Balance as of January 31, 2012
Goodwill	76.6			247.7			323.3		184.0			831.6
Accumulated impairment losses	—			—			—		(149.2		)	(149.2		)
	$	76.6		$	247.7		$	323.3	$	34.8		$	682.4

The change in the carrying amount of goodwill during the year ended January 31, 2011 is as follows:

	Platform Solutions and Emerging Business		Architecture, Engineering and Construction			Manufacturing		Media and Entertainment			Total
Balance as of January 31, 2010
Goodwill	$	40.2	$	224.8		$	277.9	$	149.2		$	692.1
Accumulated impairment losses	—		—			—		(149.2		)	(149.2		)
	40.2		224.8			277.9		—			542.9
Goodwill acquired during the year	4.6		—			—		5.5			10.1
Effect of foreign currency translation, purchase accounting adjustments and other	0.5		(0.6		)	1.2		—			1.1
Balance as of January 31, 2011
Goodwill	45.3		224.2			279.1		154.7			703.3
Accumulated impairment losses	—		—			—		(149.2		)	(149.2		)
	$	45.3	$	224.2		$	279.1	$	5.5		$	554.1

Purchase accounting adjustments reflect revisions made to the Company’s preliminary purchase price allocation during fiscal 2012 and 2011.

Impairment of Long-Lived Assets, Policy

Impairment of Long-Lived Assets

At least annually or more frequently as circumstances dictate, Autodesk assesses the recoverability of its long-lived intangible assets by comparing their carrying amounts to future undiscounted cash flows the assets are expected to generate. If certain identifiable intangibles are considered to be impaired, the impairment to be recognized equals the amount by which the carrying value of the assets exceeds its fair value. There was no impairment of long-lived assets during the years ended January 31, 2012 and 2011.

In addition to the recoverability assessments, Autodesk routinely reviews the remaining estimated useful lives of its long-lived assets. Any reduction in the useful life assumption will result in increased depreciation and amortization expense in the quarter when such determinations are made, as well as in subsequent quarters

Deferred Tax Assets, Policy

Deferred Tax Assets

Deferred tax assets arise primarily from tax credits, net operating losses, and timing differences for reserves, accrued liabilities, stock options, purchased technologies and capitalized intangibles, partially offset by the establishment of U.S. deferred tax liabilities on unremitted earnings from certain foreign subsidiaries, deferred tax liabilities associated with tax method change on advance payments, and a valuation allowance against California and Canadian deferred tax assets. They are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to reverse. Valuation allowances are established when necessary to reduce gross deferred tax assets to the amount “more likely than not” expected to be realized

Revenue Recognition, Policy

Revenue Recognition

Autodesk recognizes revenue when persuasive evidence of an arrangement exists, delivery has occurred or services have been rendered, the price is fixed or determinable, and collection is probable. For multiple element arrangements, Autodesk allocates the sales price among each of the deliverables using the residual method, under which revenue is allocated to undelivered elements based on their vendor-specific objective evidence (“VSOE”) of fair value. VSOE is the price charged when an element is sold separately or a price set by management with the relevant authority. If Autodesk does not have VSOE of an undelivered software license, revenue recognition is deferred on the entire sales arrangement until all elements for which Autodesk does not have VSOE are delivered. If Autodesk does not have VSOE for undelivered maintenance or services, the revenue for the arrangement is recognized over the longest contractual service period in the arrangement. Revenue recognition for significant lines of business is discussed further below.

Autodesk’s assessment of likelihood of collection is also a critical element in determining the timing of revenue recognition. If collection is not probable, the revenue will be deferred until the earlier of when collection is deemed probable or cash is received.

License and other revenue are comprised of two components: (1) all forms of product license revenue and (2) other revenue:

(1) All Forms of Product License Revenue

Product license revenue includes: software license revenue from the sale of new seat licenses, upgrades, product revenue for Creative Finishing and revenue from on-demand collaboration software and services. Autodesk’s existing customers who are using a currently supported version of a product can upgrade to the latest release of the product by paying a separate fee at current available prices. An existing customer also has the option to upgrade to a different product, which generally has a higher price, for a premium fee.

Autodesk’s product license revenue from distributors and resellers is generally recognized at the time title to Autodesk’s product passes to the distributor or reseller, provided all other criteria for revenue recognition are met.

Autodesk establishes reserves for product returns based on historical experience of actual product returns, estimated channel inventory levels, the timing of new product introductions, channel sell-in for applicable markets and other factors. These reserves are recorded as a direct reduction of revenue and accounts receivable at the time the related revenue is recognized.

(2) Other Revenue

Other revenue includes revenue from consulting, training, Autodesk Developers Network and Creative Finishing customer support, and is recognized over time, as the services are performed.

Maintenance revenue consists of revenue from the Company’s maintenance program. Under this program, customers are eligible to receive unspecified upgrades when-and-if-available, downloadable training courses and on-line support. Autodesk recognizes maintenance revenue from its maintenance program ratably over the maintenance service contract periods

Taxes Collected from Customers

Taxes Collected from Customers

Autodesk nets taxes collected from customers against those remitted to government authorities in the consolidated financial statements. Accordingly, taxes collected from customers are not reported as revenue

Shipping and Handling Cost, Policy

Shipping and Handling Costs

Shipping and handling costs are included in cost of revenue for all periods presented

Shock-Based Compensation Expense, Policy

Stock-based Compensation Expense

On the date of grant, Autodesk measures the fair value of all stock-based payments (including grants of stock options, employee stock purchases related to the employee stock purchase plan (“ESP Plan”), and restricted stock) to employees and directors and records the related expense in Autodesk’s Consolidated Statements of Operations. Share-based compensation cost for stock options and employee stock purchases related to the ESP Plan ("stock-based awards") are estimated at the grant date based on the fair-value as calculated using the Black-Scholes-Merton (“BSM”) option-pricing model. Share-based compensation cost for restricted stock is measured based on the closing fair market value of the Company's common stock on the date of grant. The estimated fair value of stock-based awards and restricted stock is amortized to expense on a straight-line basis over the awards’ vesting period. The following table summarizes stock-based compensation expense for fiscal 2012, 2011 and 2010, respectively, as follows:

	Fiscal Year Ended January 31,
	2012			2011			2010
Cost of license and other revenue	$	3.9		$	2.9		$	3.1
Marketing and sales	48.3			35.5			41.1
Research and development	38.1			27.4			30.0
General and administrative	18.5			14.9			19.4
Stock-based compensation expense related to stock awards and ESP Plan purchases	108.8			80.7			93.6
Tax benefit	(27.1		)	(22.0		)	(22.2		)
Stock-based compensation expense related to stock awards and ESP Plan purchases	$	81.7		$	58.7		$	71.4

In fiscal 2010, Autodesk identified errors in the calculation of stock-based compensation expense. The Company had been incorrectly calculating stock-based compensation expense by applying a weighted average forfeiture rate to the vested portion of stock option awards until the grant’s final vest date rather than calculating stock based compensation expense based upon the actual vested portion of the grant date fair value, resulting in an understatement of stock-based compensation expense in certain periods prior to the grant’s vest date. The cumulative error from the understatement of stock-based compensation expense related to the periods prior to fiscal 2010 totaled $6.8 million, net of tax effects. Accordingly, additional expenses of $0.4 million for Cost of license and other revenue, $4.4 million for Marketing and sales, $2.9 million for Research and development, $2.1 million for General and Administrative and $3.0 million for additional tax benefit are included in the stock-based compensation expenses in the table above for the fiscal year ended January 31, 2010.

Autodesk uses the BSM option-pricing model to estimate the fair value of stock-based awards based on the following assumptions:

	Fiscal Year Ended		Fiscal Year Ended		Fiscal Year Ended
	January 31, 2012		January 31, 2011		January 31, 2010
	Stock Option Plans	ESP Plan	Stock Option Plans	ESP Plan	Stock Option Plans	ESP Plan
Range of expected volatilities	40 - 49%	34 - 44%	40 - 45%	33 - 47%	43 - 55%	43 - 73%
Range of expected lives (in years)	2.6 - 4.8	0.5 - 2.0	2.6 - 4.4	0.5 - 2.0	2.7 - 4.0	0.5 - 2.0
Expected dividends	—%	—%	—%	—%	—%	—%
Range of risk-free interest rates	0.5 - 1.9%	0.1 - 0.8%	0.8 - 1.9%	0.2 - 1.1%	1.0 - 2.4%	0.2 - 1.0%
Expected forfeitures	7.8 - 10.5%	7.8 - 10.5%	10.5 - 13.5%	10.5 - 13.5%	13.5%	13.5%

Autodesk estimates expected volatility for stock-based awards based on the average of the following two measures. The first is a measure of historical volatility in the trading market for the Company’s common stock, and the second is the implied volatility of traded forward call options to purchase shares of the Company’s common stock.

Autodesk estimates the expected life of stock-based awards using both exercise behavior and post-vesting termination behavior as well as consideration of outstanding options.

Autodesk did not pay cash dividends in fiscal 2012, 2011 or 2010 and does not anticipate paying any cash dividends in the foreseeable future. Consequently, an expected dividend yield of zero is used in the BSM option pricing model.

The risk-free interest rate used in the BSM option pricing model for stock-based awards is the historical yield on U.S. Treasury securities with equivalent remaining lives.

Autodesk only recognizes expense for the stock-based awards that are ultimately expected to vest. Therefore, Autodesk has developed an estimate of the number of awards expected to cancel prior to vesting (“forfeiture rate”). The forfeiture rate is estimated based on historical pre-vest cancellation experience, and is applied to all stock-based awards. The Company estimates forfeitures at the time of grant and revises those estimates in subsequent periods if actual forfeitures differ from those estimates.

Advertising Expenses, Policy

.

Advertising Expenses

Advertising costs are expensed as incurred. Total advertising expenses incurred were $21.3 million in fiscal 2012, $18.8 million in fiscal 2011 and $18.4 million in fiscal

Net Income Per Share, Policy

Net Income Per Share

Basic net income per share is computed based on the weighted average number of shares of common stock outstanding for the period, including restricted stock awards and excluding stock options and restricted stock units. Diluted net income per share is computed based upon the weighted average shares of common shares outstanding for the period and potentially dilutive common shares, including the effect of stock options and restricted stock units under the treasury stock method.

Accounting Standards in Fiscal 2012, Policy

Accounting Standards in Fiscal 2012

With the exception of those discussed below, there have been no recent changes in accounting pronouncements issued by the Financial Accounting Standards Board (“FASB”) or adopted by the Company during the fiscal year ended January 31, 2012, that are of significance, or potential significance, to the Company.

Accounting Standards Adopted

In December 2010, the FASB issued Accounting Standard Update (“ASU”) 2010-29 regarding Accounting Standards Codification (“ASC”) Topic 805 “Business Combinations.” This ASU updates accounting guidance to clarify that pro forma disclosures should be presented as if a business combination occurred at the beginning of the prior annual period for purposes of preparing both the current reporting period and the prior reporting period pro forma financial information. These disclosures should be accompanied by a narrative description about the nature and amount of material, nonrecurring pro forma adjustments. The new accounting guidance was effective for business combinations consummated in periods beginning after December 15, 2010, and should be applied prospectively as of the date of adoption. Autodesk adopted the new disclosures under ASU 2010-29 effective February 1, 2011. The adoption of this ASU did not have an impact on Autodesk's consolidated statements of financial position, results of operations or cash flows. The impact of ASU 2010-29 on Autodesk's future disclosures will be dependent on the size of the business combinations that it consummates in future periods.

In December 2010, the FASB issued ASU 2010-28 regarding ASC Topic 350 “Intangibles - Goodwill and Other.” This ASU updates accounting guidance related to the calculation of the carrying amount of a reporting unit when performing the first step of a goodwill impairment test. More specifically, this update requires an entity to use an equity premise when performing the first step of a goodwill impairment test and if a reporting unit has a zero or negative carrying amount, the entity must assess and consider qualitative factors and whether it is more likely than not that a goodwill impairment exists. The new accounting guidance was effective for public entities, for impairment tests performed during entities' fiscal years (and interim periods within those years) that begin after December 15, 2010. Autodesk adopted the changes under ASU 2010-28 effective February 1, 2011. The adoption of this ASU did not have a material impact on Autodesk's consolidated statements of financial position, results of operations or cash flows.

In January 2010, the FASB issued ASU 2010-06 regarding ASC Topic 820 “Fair Value Measurements and Disclosures.” This ASU requires additional disclosure regarding significant transfers in and out of Levels 1 and 2 fair value measurements and the reasons for the transfers. In addition, this ASU requires the Company to separately present information about purchases, sales, issuances, and settlements (on a gross basis rather than as one net number) in the reconciliation for fair value measurements using significant unobservable inputs (Level 3). ASU 2010-06 clarifies existing disclosures regarding fair value measurement for each class of assets and liabilities and the valuation techniques and inputs used to measure fair value for recurring and nonrecurring fair value measurements that fall in either Level 2 or Level 3. This update also includes conforming amendments to the guidance on employers' disclosures about postretirement benefit plan asset (Subtopic 715-20). The changes under ASU 2010-06 were effective for Autodesk's fiscal year beginning February 1, 2010, except for the disclosures about purchases, sales, issuances and settlements in the roll forward of activity in Level 3 fair value measurements, which Autodesk adopted February 1, 2011. The adoption of this ASU did not have a material impact on Autodesk's consolidated statements of financial position, results of operations or cash flows.

In October 2009, the FASB issued ASU 2009-13 regarding ASC Subtopic 605-25 “Revenue Recognition-Multiple-element Arrangements.” This ASU addresses criteria for separating the consideration in multiple-element arrangements. ASU 2009-13 requires companies to allocate the overall consideration to each deliverable by using a best estimate of the selling price of individual deliverables in the arrangement in the absence of vendor-specific objective evidence or other third-party evidence of the selling price. In October 2009, the FASB also issued ASU 2009-14 regarding ASC Topic 985 “Software: Certain Revenue Arrangements That Include Software Elements.” This ASU modifies the scope of ASC Subtopic 985-605, “Software Revenue Recognition,” to exclude (a) non-software components of tangible products and (b) software components of tangible products that are sold, licensed or leased with tangible products when the software components and non-software components of the tangible product function together to deliver the tangible product's essential functionality. The changes under ASU 2009-13 and 2009-14 were effective prospectively for revenue arrangements entered into or materially modified in fiscal years beginning on or after June 15, 2010. Autodesk adopted the changes under ASU 2009-13 and 2009-14 effective February 1, 2011. The adoption of this ASU did not have a material impact on Autodesk's consolidated statements of financial position, results of operations or cash flows.

Recently Issued Accounting Standards

In December 2011, the FASB issued ASU 2011-11 regarding ASC Topic 210 "Balance Sheet: Disclosure about Offsetting Assets and Liabilities." This ASU requires that entities disclose additional information about offsetting and related arrangements to enable users of the financial statements to understand the effect of those arrangements on the financial position. This ASU will be effective for Autodesk's fiscal year beginning February 1, 2013. Autodesk believes that the adoption of this ASU may impact future disclosures but will not impact its consolidated statements of financial position, results of operations or cash flows.

In September 2011, the FASB issued ASU 2011-08 regarding ASC Topic 350 “Intangibles - Goodwill and Other.” This ASU allows for the option to first assess qualitative factors to determine whether the existence of events or circumstances leads to a determination that it is more likely than not that the fair value of a reporting unit is less than its carrying amount. If, after assessing the totality of events or circumstances, it is more likely than not that the fair value of the reporting unit is greater than its carrying value, then performing the two-step impairment test is unnecessary. This ASU will be effective for Autodesk's fiscal year beginning February 1, 2012. Autodesk believes that the adoption of this ASU will not have a material impact on its consolidated statements of financial position, results of operations or cash flows.

In June 2011, the FASB issued ASU 2011-05 regarding ASC Topic 220 “Comprehensive Income.” This ASU eliminates the option to present components of other comprehensive income as part of the statement of changes in stockholders' equity and requires the presentation of the total of comprehensive income, the components of net income, and the components of other comprehensive income either in a single continuous statement of comprehensive income or in two separate but consecutive statements. In December 2011, the FASB issued ASU 2011-12 in order to defer new requirements around the presentation of reclassification adjustments on the face of the financial statements between accumulated other comprehensive income and the components of net income and other comprehensive income originally issued in ASU 2011-05. Both ASUs will be effective for Autodesk's fiscal year beginning February 1, 2012. Autodesk currently believes that these new accounting pronouncements will impact the presentation of other comprehensive income but will not impact its consolidated financial position, results of operations or cash flow.

In May 2011, FASB issued ASU 2011-04 regarding ASC Topic 820 “Fair Value Measurement.” This ASU updates accounting guidance to clarify how to measure fair value to align the guidance surrounding Fair Value Measurement within GAAP and International Financial Reporting Standards. In addition, the ASU updates certain requirements for measuring fair value and for disclosure around fair value measurement. It does not require additional fair value measurements and the ASU was not intended to establish valuation standards or affect valuation practices outside of financial reporting. This ASU will be effective for Autodesk's fiscal year beginning February 1, 2012. Early adoption is not permitted. Autodesk believes that the adoption of this ASU will not have a material impact on its consolidated statements of financial position, results of operations or cash flows.

XML

Commitments and Contingencies Future Minimum Lease Payments (Details) (USD $) In Millions, unless otherwise specified	12 Months Ended
	Jan. 31, 2012	Jan. 31, 2011	Jan. 31, 2010
Future Minimum Lease Payments [Abstract]
2013	$ 50.8
2014	41.4
2015	34.9
2016	30.0
2017	23.9
Thereafter	59.9
Operating Leases, Future Minimum Payments Due	240.9
Less: Sublease income	3.3
Operating Leases Future Minimum Payments Due Net, Total	237.6
Rent Expense	$ 53.0	$ 52.1	$ 56.8

XML

Business and Summary of Significant Accounting Policies

12 Months Ended

Jan. 31, 2012

Business and Summary Of Significant Accounting Policies

Business and Summary of Significant Accounting Policies

Business

Autodesk, Inc. (“Autodesk” or the “Company”) is a world leading design software and services company, offering customers productive business solutions through powerful technology products and services. The Company serves customers in the architecture, engineering and construction; manufacturing; and digital media and entertainment industries. The Company’s sophisticated software products enable its customers to experience their ideas before they are real by allowing them to imagine, design, and create their ideas and to visualize, simulate and analyze real-world performance early in the design process by creating digital prototypes. These capabilities allow Autodesk’s customers to optimize and improve their designs, help save time and money, improve quality and foster innovation. Autodesk software products are sold globally, both directly to customers and through a network of resellers and distributors.

Principles of Consolidation

The accompanying consolidated financial statements include the accounts of Autodesk and its wholly-owned and majority-owned subsidiaries. All significant intercompany accounts and transactions have been eliminated.

Use of Estimates

The preparation of financial statements in conformity with generally accepted accounting principles requires management to make estimates and assumptions that affect the amounts reported in Autodesk’s consolidated financial statements and notes thereto. These estimates are based on information available as of the date of the consolidated financial statements. On a regular basis, management evaluates these estimates and assumptions. Actual results may differ materially from these estimates.

Examples of significant estimates and assumptions made by management involve the determination of the fair value of goodwill, financial instruments, long-lived assets and other intangible assets, the realizability of deferred tax assets and the fair value of stock awards (see “Stock-Based Compensation Expense” within this Note 1 and Note 3 “Employee and Director Stock Plans,” for further discussion). The Company also make assumptions, judgments and estimates in determining the accruals for uncertain tax positions, variable compensation, partner incentive programs, product returns reserves, allowances for doubtful accounts, asset retirement obligations and legal contingencies.

Foreign Currency Translation

The assets and liabilities of Autodesk’s foreign subsidiaries are translated from their respective functional currencies into U.S. dollars at the rates in effect at the balance sheet date, and revenue and expense amounts are translated at weighted average rates during the period. Foreign currency translation adjustments are recorded as other comprehensive income (loss).

Gains and losses realized from foreign currency transactions, those transactions denominated in currencies other than the foreign subsidiary’s functional currency, are included in interest and other income, net.

Derivative Financial Instruments

Under its risk management strategy, Autodesk uses derivative instruments to manage its short-term exposures to fluctuations in foreign currency exchange rates which exist as part of ongoing business operations. Autodesk’s general practice is to hedge a majority of transaction exposures denominated in euros, Japanese yen, Swiss francs, British pounds, Canadian dollars, and Australian dollars. These instruments have maturities between one to 12 months in the future. Autodesk does not enter into any derivative instruments for trading or speculative purposes.

The bank counterparties in all contracts expose Autodesk to credit-related losses in the event of their nonperformance. However, to mitigate that risk, Autodesk only contracts with counterparties who meet the Company’s minimum requirements under its counterparty risk assessment process. Autodesk monitors ratings, credit spreads and potential downgrades on at least a quarterly basis. Based on Autodesk’s on-going assessment of counterparty risk, the Company will adjust its exposure to various counterparties. Autodesk generally enters into master netting arrangements, which reduce credit risk by permitting net settlement of transactions with the same counterparty. However, Autodesk does not have any master netting arrangements in place with collateral features.

Autodesk accounts for its derivative instruments as either assets or liabilities on the balance sheet and carries them at fair value. Gains and losses resulting from changes in fair value are accounted for depending on the use of the derivative and whether it is designated and qualifies for hedge accounting. Derivatives that do not qualify for hedge accounting are adjusted to fair value through earnings. See Note 2, "Financial Instruments" for information regarding Autodesk's hedging activities.

Cash and Cash Equivalents

Autodesk considers all highly liquid investments with insignificant interest rate risk and remaining maturities of three months or less at the date of purchase to be cash equivalents. Cash equivalents are recorded at cost, which approximates fair value.

Marketable Securities

Marketable securities are stated at fair value. Marketable securities maturing within one year that are not restricted are classified as current assets.

Autodesk determines the appropriate classification of its marketable securities at the time of purchase and re-evaluates such classification as of each balance sheet date. Autodesk carries all “available-for-sale securities” at fair value, with unrealized gains and losses, net of tax, reported in stockholders’ equity until disposition or maturity. Autodesk carries all “trading securities” at fair value, with unrealized gains and losses, recorded in “Interest and other income, net” in the Company’s Consolidated Statements of Operations.

All of Autodesk’s marketable securities are subject to a periodic impairment review. The Company recognizes an impairment charge when a decline in the fair value of its investments below the cost basis is judged to be other-than-temporary. Autodesk considers various factors in determining whether to recognize an impairment charge, including the length of time and extent to which the fair value has been less than Autodesk’s cost basis, the financial condition and near-term prospects of the investee, and Autodesk’s intent and ability to hold the investment for a period of time sufficient to allow for any anticipated recovery in the market value. Autodesk did not record any other-than temporary impairment charges during fiscal 2012 and fiscal 2011. For additional information, see “Concentration of Credit Risk” within this Note 1 and Note 2, “Financial Instruments.”

Accounts Receivable, Net

Accounts receivable, net, consisted of the following as of January 31:

	2012			2011
Trade accounts receivable	$	433.9		$	363.0
Less: Allowance for doubtful accounts	(5.5		)	(4.2		)
Product returns reserve	(5.8		)	(10.6		)
Partner programs and other obligations	(27.5		)	(29.8		)
Accounts receivable, net	$	395.1		$	318.4

Allowances for uncollectible trade receivables are based upon historical loss patterns, the number of days that billings are past due and an evaluation of the potential risk of loss associated with problem accounts.

The product returns reserves are based on historical experience of actual product returns, estimated channel inventory levels, the timing of new product introductions, channel sell-in for applicable markets and other factors.

Partner program and other obligations are primarily related to partner incentives that use quarterly attainment monetary rewards to motivate distributors and resellers to achieve mutually agreed upon business goals in a specified time period.

Concentration of Credit Risk

Autodesk places its cash, cash equivalents and marketable securities in highly liquid instruments with, and in the custody of, financial institutions with high credit ratings and limits the amounts invested with any one institution, type of security and issuer.

Geographical concentrations of consolidated cash, cash equivalents and marketable securities held by Autodesk as of January 31:

	2012		2011
United States	11	%	14	%
Other Americas	1	%	1	%
Europe, Middle East and Africa (“EMEA”)	51	%	49	%
Asia Pacific (“APAC”)	37	%	36	%

Autodesk's primary commercial banking relationship is with Citibank and its global affiliates (“Citibank”). The Company's cash and cash equivalents are held by diversified financial institutions globally. Citicorp USA, Inc., an affiliate of Citibank, is one of the lead lenders and agent in the syndicate of Autodesk's $400.0 million line of credit facility.

Autodesk’s accounts receivable are derived from sales to a large number of resellers, distributors and direct customers in the Americas; EMEA; and APAC geographies. Autodesk performs ongoing evaluations of its customers’ financial condition and limits the amount of credit extended when deemed necessary, but generally does not require collateral from such parties. Total sales to the Company's largest distributor Tech Data Corporation, and its global affiliates (“Tech Data”), accounted for 17%, 16% and 14% of our net revenue for fiscal years ended 2012, 2011 and 2010, respectively. The majority of the net revenue from sales to Tech Data relates to Autodesk's Platform Solutions and Emerging Business segment and is for sales made outside of the United States. In addition, Tech Data accounted for 21% and 16% of trade accounts receivable at January 31, 2012 and 2011, respectively. In October 2011, Tech Data purchased certain assets of Mensch and Maschine Software (“MuM”), which has been a distributor of our products in Europe. The acquisition concentrates additional sales through Tech Data, which on a consolidated basis would have accounted for 21%, 22% and 21% of our net revenue for fiscal years 2012, 2011 and 2010, if the acquisition had taken place at the beginning of fiscal 2010.

Computer Equipment, Software, Furniture and Leasehold Improvements, Net

Computer equipment, software and furniture are depreciated using the straight-line method over the estimated useful lives of the assets, which range from three to five years. Leasehold improvements are amortized on a straight-line basis over the shorter of their estimated useful lives or the lease term. Depreciation expense was $43.7 million in fiscal 2012, $47.6 million in fiscal 2011 and $50.4 million in fiscal 2010.

Computer equipment, software, furniture, leasehold improvements and the related accumulated depreciation at January 31 were as follows:

	2012			2011
Computer software, at cost	$	133.5		$	129.4
Computer hardware, at cost	153.3			123.7
Leasehold improvements, land and buildings, at cost	139.5			121.3
Furniture and equipment, at cost	47.7			43.6
	474.0			418.0
Less: Accumulated depreciation	(369.5		)	(333.5		)
Computer software, hardware, leasehold improvements, furniture and equipment, net	$	104.5		$	84.5

Costs incurred for computer software developed or obtained for internal use are capitalized for application development activities, if material, and immediately expensed for preliminary project activities and post-implementation activities. These capitalized costs are amortized over the software’s expected useful life, which is generally three years.

Software Development Costs

Software development costs incurred prior to the establishment of technological feasibility are included in research and development expenses. Autodesk defines establishment of technological feasibility as the completion of a working model. Software development costs incurred subsequent to the establishment of technological feasibility through the period of general market availability of the products are capitalized and generally amortized over a one year period, if material. Autodesk had no capitalized software development costs at January 31, 2012 and January 31, 2011.

Other Intangible Assets, Net

Other intangible assets include purchased technologies, customer relationships, trade names and the related accumulated amortization. These assets are shown as “Purchased technologies, net” and as part of “Other assets” in the Consolidated Balance Sheet. The majority of Autodesk’s other intangible assets are amortized to expense over the estimated economic life of the product, which ranges from two to seven years. Amortization expense for purchased technologies, customer relationships, trade names, patents, and user lists was $71.8 million in fiscal 2012, $57.8 million in fiscal 2011 and $61.2 million in fiscal 2010.

Other intangible assets and related accumulated amortization at January 31 were as follows:

	2012			2011
Purchased technologies, at cost(1)	$	378.7		$	313.1
Customer relationships, trade names, patents, and user lists, at cost(2)	215.3			179.1
	594.0			492.2
Less: Accumulated amortization	(445.2		)	(373.4		)
Other intangible assets, net	$	148.8		$	118.8

____________________ 

(1) Purchased technologies include $1.2 million and zero of in-process research and development technology as of January 31, 2012 and January 31, 2011, respectively. In-process research and development is an indefinite lived asset that is held and tested at least annually for impairment until such time that it becomes fully developed technology. Once development is completed, the technology is amortized to expense over an applicable useful life.

(2) Included as a net balance in “Other assets” in the Consolidated Balance Sheet. Customer relationships and trade names include the effects of foreign currency translation.

The weighted average amortization period for purchased technologies, customer relationships and trade names during fiscal 2012 was 5.4 years. Expected future amortization expense for purchased technologies, customer relationships and trade names for each of the fiscal years ended thereafter is as follows:

	Year ending January 31,
2013	$	65.7
2014	47.1
2015	25.5
2016	7.9
2017	1.0
Thereafter	1.6
Total	$	148.8

Goodwill

Goodwill consists of the excess of cost over the fair value of net assets acquired in business combinations. Autodesk assigns goodwill to the reportable segment associated with each business combination, and tests goodwill for impairment annually in its fourth fiscal quarter or more often if circumstances indicate a potential impairment. When assessing goodwill for impairment, Autodesk uses discounted cash flow models that include assumptions regarding reportable segments’ projected cash flows (“Income Approach”) and corroborates it with the estimated consideration that the Company would receive if there were to be a sale of the reporting segment (“Market Approach”). Variances in these assumptions could have a significant impact on Autodesk’s conclusion as to whether goodwill is impaired or the amount of any impairment charge. Impairment charges, if any, result from instances where the fair values of net assets associated with goodwill are less than their carrying values. The process of evaluating the potential impairment of goodwill is subjective and requires significant judgment at many points during the analysis. The value of Autodesk’s goodwill could also be impacted by future adverse changes such as: (i) declines in Autodesk’s actual financial results, (ii) a sustained decline in Autodesk’s market capitalization, (iii) significant slowdown in the worldwide economy or the industries Autodesk serves, or (iv) changes in Autodesk’s business strategy or internal financial results forecasts. There was no impairment of goodwill during the year ended January 31, 2012. A hypothetical 10%decrease in the fair value of Autodesk’s Platform Solutions and Emerging Business; Manufacturing; Architecture, Engineering and Construction; or Media and Entertainment reporting units would not have an impact on the carrying value, nor result in an impairment, of goodwill shown on Autodesk’s balance sheet as of January 31, 2012 for the respective reporting units.

During the fiscal year ended 2010, Autodesk recorded an impairment charge of $21.0 million, representing the entire goodwill balance of the Media and Entertainment (“M&E”) segment as of April 30, 2009. Should revenue and cash flow projections decline significantly in the future, additional impairment charges may be recorded to goodwill.

The change in the carrying amount of goodwill during the year ended January 31, 2012 is as follows:

	Platform Solutions and Emerging Business			Architecture, Engineering and Construction			Manufacturing		Media and Entertainment			Total
Balance as of January 31, 2011
Goodwill	$	45.3		$	224.2		$	279.1	$	154.7		$	703.3
Accumulated impairment losses	—			—			—		(149.2		)	(149.2		)
	45.3			224.2			279.1		5.5			554.1
Scaleform acquisition	—			—			—		22.6			22.6
Blue Ridge acquisition	—			—			22.3		—			22.3
Instructables acquisition	24.4			—			—		—			24.4
Micro Application Packages Limited acquisition	—			12.7			—		—			12.7
T-Splines acquisition	—			—			19.8		—			19.8
Goodwill acquired from other acquisitions	7.6			12.0			2.0		6.7			28.3
Effect of foreign currency translation, purchase accounting adjustments and other	(0.7		)	(1.2		)	0.1		—			(1.8		)
Balance as of January 31, 2012
Goodwill	76.6			247.7			323.3		184.0			831.6
Accumulated impairment losses	—			—			—		(149.2		)	(149.2		)
	$	76.6		$	247.7		$	323.3	$	34.8		$	682.4

The change in the carrying amount of goodwill during the year ended January 31, 2011 is as follows:

	Platform Solutions and Emerging Business		Architecture, Engineering and Construction			Manufacturing		Media and Entertainment			Total
Balance as of January 31, 2010
Goodwill	$	40.2	$	224.8		$	277.9	$	149.2		$	692.1
Accumulated impairment losses	—		—			—		(149.2		)	(149.2		)
	40.2		224.8			277.9		—			542.9
Goodwill acquired during the year	4.6		—			—		5.5			10.1
Effect of foreign currency translation, purchase accounting adjustments and other	0.5		(0.6		)	1.2		—			1.1
Balance as of January 31, 2011
Goodwill	45.3		224.2			279.1		154.7			703.3
Accumulated impairment losses	—		—			—		(149.2		)	(149.2		)
	$	45.3	$	224.2		$	279.1	$	5.5		$	554.1

Purchase accounting adjustments reflect revisions made to the Company’s preliminary purchase price allocation during fiscal 2012 and 2011.

Impairment of Long-Lived Assets

At least annually or more frequently as circumstances dictate, Autodesk assesses the recoverability of its long-lived intangible assets by comparing their carrying amounts to future undiscounted cash flows the assets are expected to generate. If certain identifiable intangibles are considered to be impaired, the impairment to be recognized equals the amount by which the carrying value of the assets exceeds its fair value. There was no impairment of long-lived assets during the years ended January 31, 2012 and 2011.

In addition to the recoverability assessments, Autodesk routinely reviews the remaining estimated useful lives of its long-lived assets. Any reduction in the useful life assumption will result in increased depreciation and amortization expense in the quarter when such determinations are made, as well as in subsequent quarters.

Deferred Tax Assets

Deferred tax assets arise primarily from tax credits, net operating losses, and timing differences for reserves, accrued liabilities, stock options, purchased technologies and capitalized intangibles, partially offset by the establishment of U.S. deferred tax liabilities on unremitted earnings from certain foreign subsidiaries, deferred tax liabilities associated with tax method change on advance payments, and a valuation allowance against California and Canadian deferred tax assets. They are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to reverse. Valuation allowances are established when necessary to reduce gross deferred tax assets to the amount “more likely than not” expected to be realized.

Revenue Recognition

Autodesk recognizes revenue when persuasive evidence of an arrangement exists, delivery has occurred or services have been rendered, the price is fixed or determinable, and collection is probable. For multiple element arrangements, Autodesk allocates the sales price among each of the deliverables using the residual method, under which revenue is allocated to undelivered elements based on their vendor-specific objective evidence (“VSOE”) of fair value. VSOE is the price charged when an element is sold separately or a price set by management with the relevant authority. If Autodesk does not have VSOE of an undelivered software license, revenue recognition is deferred on the entire sales arrangement until all elements for which Autodesk does not have VSOE are delivered. If Autodesk does not have VSOE for undelivered maintenance or services, the revenue for the arrangement is recognized over the longest contractual service period in the arrangement. Revenue recognition for significant lines of business is discussed further below.

Autodesk’s assessment of likelihood of collection is also a critical element in determining the timing of revenue recognition. If collection is not probable, the revenue will be deferred until the earlier of when collection is deemed probable or cash is received.

License and other revenue are comprised of two components: (1) all forms of product license revenue and (2) other revenue:

(1) All Forms of Product License Revenue

Product license revenue includes: software license revenue from the sale of new seat licenses, upgrades, product revenue for Creative Finishing and revenue from on-demand collaboration software and services. Autodesk’s existing customers who are using a currently supported version of a product can upgrade to the latest release of the product by paying a separate fee at current available prices. An existing customer also has the option to upgrade to a different product, which generally has a higher price, for a premium fee.

Autodesk’s product license revenue from distributors and resellers is generally recognized at the time title to Autodesk’s product passes to the distributor or reseller, provided all other criteria for revenue recognition are met.

Autodesk establishes reserves for product returns based on historical experience of actual product returns, estimated channel inventory levels, the timing of new product introductions, channel sell-in for applicable markets and other factors. These reserves are recorded as a direct reduction of revenue and accounts receivable at the time the related revenue is recognized.

(2) Other Revenue

Other revenue includes revenue from consulting, training, Autodesk Developers Network and Creative Finishing customer support, and is recognized over time, as the services are performed.

Maintenance revenue consists of revenue from the Company’s maintenance program. Under this program, customers are eligible to receive unspecified upgrades when-and-if-available, downloadable training courses and on-line support. Autodesk recognizes maintenance revenue from its maintenance program ratably over the maintenance service contract periods.

Taxes Collected from Customers

Autodesk nets taxes collected from customers against those remitted to government authorities in the consolidated financial statements. Accordingly, taxes collected from customers are not reported as revenue.

Shipping and Handling Costs

Shipping and handling costs are included in cost of revenue for all periods presented.

Stock-based Compensation Expense

On the date of grant, Autodesk measures the fair value of all stock-based payments (including grants of stock options, employee stock purchases related to the employee stock purchase plan (“ESP Plan”), and restricted stock) to employees and directors and records the related expense in Autodesk’s Consolidated Statements of Operations. Share-based compensation cost for stock options and employee stock purchases related to the ESP Plan ("stock-based awards") are estimated at the grant date based on the fair-value as calculated using the Black-Scholes-Merton (“BSM”) option-pricing model. Share-based compensation cost for restricted stock is measured based on the closing fair market value of the Company's common stock on the date of grant. The estimated fair value of stock-based awards and restricted stock is amortized to expense on a straight-line basis over the awards’ vesting period. The following table summarizes stock-based compensation expense for fiscal 2012, 2011 and 2010, respectively, as follows:

	Fiscal Year Ended January 31,
	2012			2011			2010
Cost of license and other revenue	$	3.9		$	2.9		$	3.1
Marketing and sales	48.3			35.5			41.1
Research and development	38.1			27.4			30.0
General and administrative	18.5			14.9			19.4
Stock-based compensation expense related to stock awards and ESP Plan purchases	108.8			80.7			93.6
Tax benefit	(27.1		)	(22.0		)	(22.2		)
Stock-based compensation expense related to stock awards and ESP Plan purchases	$	81.7		$	58.7		$	71.4

In fiscal 2010, Autodesk identified errors in the calculation of stock-based compensation expense. The Company had been incorrectly calculating stock-based compensation expense by applying a weighted average forfeiture rate to the vested portion of stock option awards until the grant’s final vest date rather than calculating stock based compensation expense based upon the actual vested portion of the grant date fair value, resulting in an understatement of stock-based compensation expense in certain periods prior to the grant’s vest date. The cumulative error from the understatement of stock-based compensation expense related to the periods prior to fiscal 2010 totaled $6.8 million, net of tax effects. Accordingly, additional expenses of $0.4 million for Cost of license and other revenue, $4.4 million for Marketing and sales, $2.9 million for Research and development, $2.1 million for General and Administrative and $3.0 million for additional tax benefit are included in the stock-based compensation expenses in the table above for the fiscal year ended January 31, 2010.

Autodesk uses the BSM option-pricing model to estimate the fair value of stock-based awards based on the following assumptions:

	Fiscal Year Ended		Fiscal Year Ended		Fiscal Year Ended
	January 31, 2012		January 31, 2011		January 31, 2010
	Stock Option Plans	ESP Plan	Stock Option Plans	ESP Plan	Stock Option Plans	ESP Plan
Range of expected volatilities	40 - 49%	34 - 44%	40 - 45%	33 - 47%	43 - 55%	43 - 73%
Range of expected lives (in years)	2.6 - 4.8	0.5 - 2.0	2.6 - 4.4	0.5 - 2.0	2.7 - 4.0	0.5 - 2.0
Expected dividends	—%	—%	—%	—%	—%	—%
Range of risk-free interest rates	0.5 - 1.9%	0.1 - 0.8%	0.8 - 1.9%	0.2 - 1.1%	1.0 - 2.4%	0.2 - 1.0%
Expected forfeitures	7.8 - 10.5%	7.8 - 10.5%	10.5 - 13.5%	10.5 - 13.5%	13.5%	13.5%

Autodesk estimates expected volatility for stock-based awards based on the average of the following two measures. The first is a measure of historical volatility in the trading market for the Company’s common stock, and the second is the implied volatility of traded forward call options to purchase shares of the Company’s common stock.

Autodesk estimates the expected life of stock-based awards using both exercise behavior and post-vesting termination behavior as well as consideration of outstanding options.

Autodesk did not pay cash dividends in fiscal 2012, 2011 or 2010 and does not anticipate paying any cash dividends in the foreseeable future. Consequently, an expected dividend yield of zero is used in the BSM option pricing model.

The risk-free interest rate used in the BSM option pricing model for stock-based awards is the historical yield on U.S. Treasury securities with equivalent remaining lives.

Autodesk only recognizes expense for the stock-based awards that are ultimately expected to vest. Therefore, Autodesk has developed an estimate of the number of awards expected to cancel prior to vesting (“forfeiture rate”). The forfeiture rate is estimated based on historical pre-vest cancellation experience, and is applied to all stock-based awards. The Company estimates forfeitures at the time of grant and revises those estimates in subsequent periods if actual forfeitures differ from those estimates.

Advertising Expenses

Advertising costs are expensed as incurred. Total advertising expenses incurred were $21.3 million in fiscal 2012, $18.8 million in fiscal 2011 and $18.4 million in fiscal 2010.

Net Income Per Share

Basic net income per share is computed based on the weighted average number of shares of common stock outstanding for the period, including restricted stock awards and excluding stock options and restricted stock units. Diluted net income per share is computed based upon the weighted average shares of common shares outstanding for the period and potentially dilutive common shares, including the effect of stock options and restricted stock units under the treasury stock method.

Accounting Standards in Fiscal 2012

With the exception of those discussed below, there have been no recent changes in accounting pronouncements issued by the Financial Accounting Standards Board (“FASB”) or adopted by the Company during the fiscal year ended January 31, 2012, that are of significance, or potential significance, to the Company.

Accounting Standards Adopted

In December 2010, the FASB issued Accounting Standard Update (“ASU”) 2010-29 regarding Accounting Standards Codification (“ASC”) Topic 805 “Business Combinations.” This ASU updates accounting guidance to clarify that pro forma disclosures should be presented as if a business combination occurred at the beginning of the prior annual period for purposes of preparing both the current reporting period and the prior reporting period pro forma financial information. These disclosures should be accompanied by a narrative description about the nature and amount of material, nonrecurring pro forma adjustments. The new accounting guidance was effective for business combinations consummated in periods beginning after December 15, 2010, and should be applied prospectively as of the date of adoption. Autodesk adopted the new disclosures under ASU 2010-29 effective February 1, 2011. The adoption of this ASU did not have an impact on Autodesk's consolidated statements of financial position, results of operations or cash flows. The impact of ASU 2010-29 on Autodesk's future disclosures will be dependent on the size of the business combinations that it consummates in future periods.

In December 2010, the FASB issued ASU 2010-28 regarding ASC Topic 350 “Intangibles - Goodwill and Other.” This ASU updates accounting guidance related to the calculation of the carrying amount of a reporting unit when performing the first step of a goodwill impairment test. More specifically, this update requires an entity to use an equity premise when performing the first step of a goodwill impairment test and if a reporting unit has a zero or negative carrying amount, the entity must assess and consider qualitative factors and whether it is more likely than not that a goodwill impairment exists. The new accounting guidance was effective for public entities, for impairment tests performed during entities' fiscal years (and interim periods within those years) that begin after December 15, 2010. Autodesk adopted the changes under ASU 2010-28 effective February 1, 2011. The adoption of this ASU did not have a material impact on Autodesk's consolidated statements of financial position, results of operations or cash flows.

In January 2010, the FASB issued ASU 2010-06 regarding ASC Topic 820 “Fair Value Measurements and Disclosures.” This ASU requires additional disclosure regarding significant transfers in and out of Levels 1 and 2 fair value measurements and the reasons for the transfers. In addition, this ASU requires the Company to separately present information about purchases, sales, issuances, and settlements (on a gross basis rather than as one net number) in the reconciliation for fair value measurements using significant unobservable inputs (Level 3). ASU 2010-06 clarifies existing disclosures regarding fair value measurement for each class of assets and liabilities and the valuation techniques and inputs used to measure fair value for recurring and nonrecurring fair value measurements that fall in either Level 2 or Level 3. This update also includes conforming amendments to the guidance on employers' disclosures about postretirement benefit plan asset (Subtopic 715-20). The changes under ASU 2010-06 were effective for Autodesk's fiscal year beginning February 1, 2010, except for the disclosures about purchases, sales, issuances and settlements in the roll forward of activity in Level 3 fair value measurements, which Autodesk adopted February 1, 2011. The adoption of this ASU did not have a material impact on Autodesk's consolidated statements of financial position, results of operations or cash flows.

In October 2009, the FASB issued ASU 2009-13 regarding ASC Subtopic 605-25 “Revenue Recognition-Multiple-element Arrangements.” This ASU addresses criteria for separating the consideration in multiple-element arrangements. ASU 2009-13 requires companies to allocate the overall consideration to each deliverable by using a best estimate of the selling price of individual deliverables in the arrangement in the absence of vendor-specific objective evidence or other third-party evidence of the selling price. In October 2009, the FASB also issued ASU 2009-14 regarding ASC Topic 985 “Software: Certain Revenue Arrangements That Include Software Elements.” This ASU modifies the scope of ASC Subtopic 985-605, “Software Revenue Recognition,” to exclude (a) non-software components of tangible products and (b) software components of tangible products that are sold, licensed or leased with tangible products when the software components and non-software components of the tangible product function together to deliver the tangible product's essential functionality. The changes under ASU 2009-13 and 2009-14 were effective prospectively for revenue arrangements entered into or materially modified in fiscal years beginning on or after June 15, 2010. Autodesk adopted the changes under ASU 2009-13 and 2009-14 effective February 1, 2011. The adoption of this ASU did not have a material impact on Autodesk's consolidated statements of financial position, results of operations or cash flows.

Recently Issued Accounting Standards

In December 2011, the FASB issued ASU 2011-11 regarding ASC Topic 210 "Balance Sheet: Disclosure about Offsetting Assets and Liabilities." This ASU requires that entities disclose additional information about offsetting and related arrangements to enable users of the financial statements to understand the effect of those arrangements on the financial position. This ASU will be effective for Autodesk's fiscal year beginning February 1, 2013. Autodesk believes that the adoption of this ASU may impact future disclosures but will not impact its consolidated statements of financial position, results of operations or cash flows.

In September 2011, the FASB issued ASU 2011-08 regarding ASC Topic 350 “Intangibles - Goodwill and Other.” This ASU allows for the option to first assess qualitative factors to determine whether the existence of events or circumstances leads to a determination that it is more likely than not that the fair value of a reporting unit is less than its carrying amount. If, after assessing the totality of events or circumstances, it is more likely than not that the fair value of the reporting unit is greater than its carrying value, then performing the two-step impairment test is unnecessary. This ASU will be effective for Autodesk's fiscal year beginning February 1, 2012. Autodesk believes that the adoption of this ASU will not have a material impact on its consolidated statements of financial position, results of operations or cash flows.

In June 2011, the FASB issued ASU 2011-05 regarding ASC Topic 220 “Comprehensive Income.” This ASU eliminates the option to present components of other comprehensive income as part of the statement of changes in stockholders' equity and requires the presentation of the total of comprehensive income, the components of net income, and the components of other comprehensive income either in a single continuous statement of comprehensive income or in two separate but consecutive statements. In December 2011, the FASB issued ASU 2011-12 in order to defer new requirements around the presentation of reclassification adjustments on the face of the financial statements between accumulated other comprehensive income and the components of net income and other comprehensive income originally issued in ASU 2011-05. Both ASUs will be effective for Autodesk's fiscal year beginning February 1, 2012. Autodesk currently believes that these new accounting pronouncements will impact the presentation of other comprehensive income but will not impact its consolidated financial position, results of operations or cash flow.

In May 2011, FASB issued ASU 2011-04 regarding ASC Topic 820 “Fair Value Measurement.” This ASU updates accounting guidance to clarify how to measure fair value to align the guidance surrounding Fair Value Measurement within GAAP and International Financial Reporting Standards. In addition, the ASU updates certain requirements for measuring fair value and for disclosure around fair value measurement. It does not require additional fair value measurements and the ASU was not intended to establish valuation standards or affect valuation practices outside of financial reporting. This ASU will be effective for Autodesk's fiscal year beginning February 1, 2012. Early adoption is not permitted. Autodesk believes that the adoption of this ASU will not have a material impact on its consolidated statements of financial position, results of operations or cash flows.

XML

CONSOLIDATED BALANCE SHEETS (USD $) In Millions, unless otherwise specified	Jan. 31, 2012	Jan. 31, 2011
Current assets:
Cash and cash equivalents	$ 1,156.9	$ 1,075.1
Marketable securities	254.4	199.2
Accounts receivable, net	395.1	318.4
Deferred income taxes	30.1	56.8
Prepaid expenses and other current assets	59.4	64.8
Total current assets	1,895.9	1,714.3
Marketable securities	192.8	192.6
Computer equipment, software, furniture and leasehold improvements, net	104.5	84.5
Purchased technologies, net	84.6	57.2
Goodwill	682.4	554.1
Deferred income taxes, net	135.8	90.7
Other assets	131.8	94.2
Assets, Total	3,227.8	2,787.6
Current liabilities:
Accounts payable	89.3	76.8
Accrued compensation	183.9	193.1
Accrued income taxes	14.4	28.6
Deferred revenue	582.3	496.2
Other accrued liabilities	84.2	75.1
Total current liabilities	954.1	869.8
Deferred revenue	136.9	91.7
Long term income taxes payable	174.8	139.1
Other liabilities	79.1	77.7
Commitments and contingencies
Stockholders' equity:
Preferred stock, $0.01 par value; shares authorized 2.0; none issued or outstanding at January 31, 2012 and 2011	0	0
Common stock and additional paid-in capital, $0.01 par value; shares authorized 750.0; --- outstanding at January 31, 2012 and 227.0 outstanding at January 31, 2011	1,365.4	1,267.2
Accumulated other comprehensive income (loss)	5.9	(0.6)
Retained earnings	511.6	342.7
Total stockholders' equity	1,882.9	1,609.3
Liabilities and Equity, Total	$ 3,227.8	$ 2,787.6

XML

Accumulated Other Comprehensive Income , Net of Taxes

12 Months Ended

Jan. 31, 2012

Accumulated Other Comprehensive Income (loss) [Abstract]

Accumulated Other Comprehensive Income (loss)

Accumulated Other Comprehensive Income (Loss)

Accumulated other comprehensive income (loss), net of taxes, was comprised of the following at January 31:

	January 31,
	2012			2011			2010
Net gain (loss) on derivative instruments	$	9.2		$	(0.8	)	$	2.3
Net unrealized gain on available-for-sale securities	2.6			2.4			1.5
Unfunded portion of pension plans	(8.6		)	(9.8		)	(5.9		)
Foreign currency translation adjustments	2.7			7.6			(1.4		)
Accumulated other comprehensive income (loss)	$	5.9		$	(0.6	)	$	(3.5	)

XML

Document and Entity Information (USD $)	12 Months Ended
	Jan. 31, 2012	Feb. 29, 2012	Jul. 31, 2011
Document and Entity Information [Abstract]
Entity Registrant Name	AUTODESK INC.
Entity Central Index Key	0000769397
Current Fiscal Year End Date	--01-31
Entity Filer Category	Large Accelerated Filer
Document Type	10-K
Document Period End Date	Jan. 31, 2012
Document Fiscal Year Focus	2012
Document Fiscal Period Focus	FY
Amendment Flag	false
Entity Common Stock, Shares Outstanding		227,300,000
Entity Well-known Seasoned Issuer	Yes
Entity Voluntary Filers	No
Entity Current Reporting Status	Yes
Entity Public Float			$ 7,800,000,000

XML

Net Income Per Share

12 Months Ended

Jan. 31, 2012

Net Income Per Share

Net Income Per Share

Basic net income per share is computed using the weighted average number of shares of common stock outstanding for the period, including restricted stock awards and excluding stock options and restricted stock units. Diluted net income per share is based upon the weighted average shares of common stock outstanding for the period and potentially dilutive common shares, including the effect of stock options and restricted stock units under the treasury stock method. The following table sets forth the computation of the numerators and denominators used in the basic and diluted net income per share amounts:

	Fiscal Year Ended January 31,
	2012		2011		2010
Numerator:
Net income	$	285.3	$	212.0	$	58.0
Denominator:
Denominator for basic net income per share—weighted average shares	227.7		227.6		228.7
Effect of dilutive securities	5.6		6.6		3.4
Denominator for dilutive net income per share	233.3		234.2		232.1
Basic net income per share	$	1.25	$	0.93	$	0.25
Diluted net income per share	$	1.22	$	0.90	$	0.25

The computation of diluted net income per share does not include shares that are anti-dilutive under the treasury stock method because their exercise prices are higher than the average market value of Autodesk’s stock during the fiscal year. For the fiscal years ended January 31, 2012, 2011 and 2010, 12.9 million, 19.3 million and 21.3 million potentially anti-dilutive shares, respectively, were excluded from the computation of net income per share.

XML

Selected Quarterly Financial Information (Details) (USD $) In Millions, except Per Share data, unless otherwise specified	3 Months Ended								12 Months Ended
	Jan. 31, 2012	Oct. 31, 2011	Jul. 31, 2011	Apr. 30, 2011	Jan. 31, 2011	Oct. 31, 2010	Jul. 31, 2010	Apr. 30, 2010	Jan. 31, 2012	Jan. 31, 2011	Jan. 31, 2010
Selected Quarterly Financial Information (Unaudited) [Abstract]
Revenue, Net	$ 592.4	$ 548.6	$ 546.3	$ 528.3	$ 527.7	$ 476.7	$ 472.8	$ 474.6	$ 2,215.6	$ 1,951.8	$ 1,713.7
Gross Profit	534.9	489.0	488.9	473.7	479.3	428.2	424.4	423.3	1,986.5	1,755.2	1,521.9
Income from operations	91.8	90.2	95.0	78.6	71.6	69.2	79.8	50.8	355.6	271.4	65.6
Provision for income taxes	(20.9)	(18.5)	(23.0)	(15.2)	(11.4)	(18.1)	(20.0)	(10.5)	(77.6)	(60.0)	(26.7)
Net income	72.0	72.8	71.2	69.3	61.6	53.6	59.9	36.9	285.3	212.0	58.0
Earnings Per Share, Basic	$ 0.32	$ 0.32	$ 0.31	$ 0.30	$ 0.27	$ 0.24	$ 0.26	$ 0.16	$ 1.25	$ 0.93	$ 0.25
Earnings Per Share, Diluted	$ 0.31	$ 0.32	$ 0.30	$ 0.29	$ 0.26	$ 0.23	$ 0.25	$ 0.16	$ 1.22	$ 0.90	$ 0.25
income from operations includes following items [Abstract]
Stock Based Compensation Expense	30.0	25.6	27.3	25.9	18.4	17.0	21.0	24.3	108.8	80.7	93.6
Amortization of acquisition realted Intangible Assets	18.6	19.3	17.8	14.6	14.3	14.1	13.6	13.9	70.3	55.9
Restructuring Charges	$ 0	$ 0	$ (1.3)	$ 0	$ 1.8	$ 0	$ 1.9	$ 7.1	$ (1.3)	$ 10.8	$ 48.2

XML

BALANCE SHEET (Parentheticals) (USD $)	Jan. 31, 2012	Jan. 31, 2011
Common stock, par value	$ 0.01	$ 0.01
Common stock, shares authorized	750,000,000	750,000,000
Common stock, shares outstanding	226	227
Preferred stock, par value	$ 0.01	$ 0.01
Preferred stock, shares authorized	2,000,000	2,000,000
Preferred Stock, Shares Issued	0	0
Preferred Stock, Shares Outstanding	0	0

XML

Deferred Compensation

12 Months Ended

Jan. 31, 2012

Deferred Compensation Liability [Abstract]

Deferred Compensation

Deferred Compensation

At January 31, 2012, Autodesk had marketable securities totaling $447.2 million, of which $31.5 million related to investments in debt and equity securities that are held in a rabbi trust under non-qualified deferred compensation plans. The total related deferred compensation liability was $31.5 million at January 31, 2012, of which $3.2 million was classified as current and $28.3 million was classified as non-current liabilities. The value of debt and equity securities held in the rabbi trust at January 31, 2011 was $31.3 million. The total related deferred compensation liability at January 31, 2011 was $31.3 million, of which $3.4 million was classified as current and $27.9 million was classified as non-current liabilities. The current and non-current portions of the liability are recorded in the Consolidated Balance Sheets under “Accrued compensation” and “Other liabilities,” respectively.

XML

Acquisitions

12 Months Ended

Jan. 31, 2012

Acquisitions

5.    Acquisitions

During the fiscal year ended January 31, 2012, Autodesk completed the business combinations and technology purchases described below. The results of operations for the following acquisitions are included in the accompanying Consolidated Statement of Operations since their respective acquisition date. Pro forma results of operations have not been presented because the effects of the following acquisitions, individually and in the aggregate, were not material to Autodesk's Consolidated Financial Statements.

For acquisitions accounted for as business combinations, Autodesk recorded the tangible and intangible assets acquired and liabilities assumed based on their estimated fair values at the date of acquisition. The fair values assigned to the identifiable intangible assets acquired were based on estimates and assumptions determined by management. Autodesk recorded the excess of consideration transferred over the aggregate fair values as goodwill.

On March 1, 2011, Autodesk acquired Scaleform Corporation (“Scaleform”) for total cash consideration of $36.2 million. Scaleform was a privately held middleware and user interface tools company, whose technology has been licensed in the development of games across all major hardware platforms. Scaleform has been integrated into, and the related goodwill was assigned to Autodesk's Media and Entertainment segment.

On March 10, 2011, Autodesk acquired Blue Ridge Numerics, Inc. (“Blue Ridge”) for total cash consideration of $41.2 million. Blue Ridge was a privately held company that designed and sold software that enables mechanical engineers to study fluid flow and thermal performance in virtual prototyping. Blue Ridge has been integrated into, and the related goodwill was assigned to Autodesk's Manufacturing segment.

On August 1, 2011, Autodesk acquired Instructables, Inc. (“Instructables”) for total cash consideration of $30.2 million. Instructables was a privately held web-based company specializing in user-created and uploaded instructions for do-it-yourself projects, on which other users can comment and rate for quality. Instructables has been integrated into, and the related goodwill was assigned to Autodesk's Platform Solutions and Emerging Business segment.

On August 24, 2011, Autodesk entered into a purchase agreement with Turbo Squid, Inc. (“Turbo Squid”) to acquire certain technology related assets for $26.0 million and entered into related cross-licensing and a commercial arrangement which is less than $0.2 million in expense per year. Additionally, Autodesk purchased the option to acquire Turbo Squid within a prescribed date range.

On October 14, 2011, Autodesk acquired Micro Application Packages Limited (“MAP”) for total cash consideration of $23.0 million. MAP was a privately held company specializing in software and services in the building information modeling (“BIM”) life cycle with the focus on fabrication. MAP has been integrated into, and the related goodwill was assigned to Autodesk's Architecture, Engineering and Construction segment.

On December 21, 2011, Autodesk acquired certain technology-related assets of T-Splines, Inc. ("T-Splines") for total cash consideration of $23.0 million. T-Splines is a privately-held company, that develops surface modeling software for industrial designers and CAD professionals. The assets of T-Splines have been integrated into, and the related goodwill was assigned to Autodesk's Manufacturing segment.

During the fiscal year ended January 31, 2012, Autodesk also completed 17 other business combination and technology acquisitions for a total cash consideration of approximately $54.8 million. These business combinations and technology acquisitions were not material individually or in aggregate to Autodesk's Consolidated Financial Statements.

The following table summarizes the fair value of the assets acquired and liabilities assumed by major class for each of the business combinations and technology acquisitions completed during the fiscal year ended January 31, 2012:

	Scaleform			Blue Ridge			Instructables			MAP			Turbo Squid		T-Splines		Other
Developed technologies	$	5.9		$	6.0		$	0.4		$	2.5		$	26.0	$	2.1	$	21.7
Customer relationships	4.4			9.2			0.2			2.0			—		0.7		3.9
Trade name	1.4			1.1			1.6			0.9			—		0.4		1.2
User List	—			—			5.1			—			—		—		—
Patent	3.6			—			—			—			—		—		—
In-process research and development	0.6			0.6			—			—			—		—		—
Goodwill	22.6			22.3			24.4			12.7			—		19.8		28.3
Deferred Revenue	—			(1.2		)	—			—			—		—		—
Deferred tax asset (liability)	(2.5		)	(3.6		)	(1.6		)	(1.6		)	—		—		0.2
Net tangible assets (liabilities)	0.2			6.8			0.1			6.5			—		—		(0.5		)
Total	$	36.2		$	41.2		$	30.2		$	23.0		$	26.0	$	23.0	$	54.8

For Instructables and MAP the allocation of purchase price consideration to the assets and liabilities is not yet finalized. The allocation of the purchase price consideration was based upon a preliminary valuation and our estimates and assumptions are subject to change within the measurement period (up to one year from the acquisition date). The primary areas of the preliminary purchase price allocation that are not yet finalized are amounts for income tax assets and liabilities, pending finalization of estimates and assumptions in respect of certain tax aspects of the transaction and residual goodwill.

During the fiscal year ended January 31, 2011, the Company acquired two entities, neither of which were individually material, for total consideration of $13.5 million.

XML

SCHEDULE II

12 Months Ended

Jan. 31, 2012

Financial Statement Schedule II

FINANCIAL STATEMENT SCHEDULE II

Description	Balance at Beginning of Year		Additions Charged to Costs and Expenses or Revenues			Deductions and Write-Offs		Balance at End of Year
	(in millions)
Fiscal Year ended January 31, 2012
Allowance for doubtful accounts	$	4.2	$	2.4		$	1.1	$	5.5
Product returns reserves	10.6		32.7			37.5		5.8
Restructuring	8.6		—			6.2		2.4
Fiscal Year ended January 31, 2011
Allowance for doubtful accounts	$	4.6	$	(0.3	)	$	0.1	$	4.2
Product returns reserves	11.8		38.9			40.1		10.6
Restructuring	19.4		13.7			24.5		8.6
Fiscal Year ended January 31, 2010
Allowance for doubtful accounts	$	8.6	$	1.7		$	5.7	$	4.6
Product returns reserves	12.5		42.9			43.6		11.8
Restructuring	43.9		48.9			73.4		19.4

XML

Segments

12 Months Ended

Jan. 31, 2012

Segments

Segments

Autodesk reports segment information based on the “management” approach. The management approach designates the internal reporting used by management for making decisions and assessing performance as the source of the Company’s reportable segments. Autodesk has four reportable segments: Platform Solutions and Emerging Business (“PSEB”), Architecture, Engineering and Construction (“AEC”), Manufacturing (“MFG”) and Media and Entertainment (“M&E”). Location Services, which Autodesk disposed of in February 2009, is not included in any of the above reportable segments, and is reflected as Other. Autodesk has no material inter-segment revenue.

The PSEB, AEC and MFG segments derive revenue from the sale of licenses for software products and services to customers who design, build, manage or own building, manufacturing and infrastructure projects. Our M&E segment derives revenue from the sale of products to creative professionals, post-production facilities and broadcasters for a variety of applications, including feature films, television programs, commercials, music and corporate videos, interactive game production, web design and interactive web streaming.

PSEB includes Autodesk’s design product, AutoCAD. Autodesk’s AutoCAD product is a platform product that underpins the Company’s design product offerings for the industries it serves. For example, AEC and MFG offer tailored versions of AutoCAD software for the industries they serve. Autodesk’s AutoCAD product also provides a platform for Autodesk’s developer partners to build custom solutions for a range of diverse design-oriented markets. PSEB’s revenue primarily includes revenue from sales of licenses of Autodesk’s design products, AutoCAD and AutoCAD LT, as well as the Autodesk Design Suite and many other design products.

AEC software products help to improve the way building, civil infrastructure, process plant and construction projects are designed, built and managed. A broad portfolio of solutions enables greater efficiency, accuracy and sustainability across the entire project lifecycle. Autodesk AEC solutions include advanced technology for building information modeling (“BIM”), AutoCAD-based design and documentation productivity software, sustainable design analysis applications, and collaborative project management solutions. BIM, an integrated process for building and infrastructure design, analysis, documentation and construction, uses consistent, coordination information to improve communication and collaboration between the extended project team. AEC provides a comprehensive portfolio of BIM solutions that help customers deliver projects faster and more economically, while minimizing environmental impact. AEC’s revenue primarily includes revenue from the sales of licenses of Autodesk Revit family suites, AutoCAD Civil 3D, AutoCAD Architecture and AutoCAD Map 3D products.

MFG provides the manufacturers in automotive and transportation, industrial machinery, consumer products and building products with comprehensive digital prototyping solutions that brings together design data from all phases of the product development process to develop a single digital model created in Autodesk Inventor software. Autodesk’s solutions for digital prototyping enable a broad group of manufacturers to realize benefits with minimal disruption to existing workflows. MFG’s revenue primarily includes revenue from the sales of licenses of Autodesk Inventor family suites, AutoCAD Mechanical and Autodesk Moldflow products.

M&E is comprised of two product groups: Animation, including design visualization, and Creative Finishing. Animation products, such as Autodesk 3ds Max, Autodesk Maya and the Autodesk Entertainment Creation Suite, provide tools for digital sculpting, modeling, animation, effects, rendering and compositing, for design visualization, visual effects and games production. Creative Finishing products provide editing, finishing and visual effects design and color grading.

All of Autodesk’s reportable segments distribute their respective products primarily through authorized resellers and distributors and, to a lesser extent, through direct sales to end-users.

The accounting policies of the reportable segments are the same as those described in Note 1, “Business and Summary of Significant Accounting Policies.” Autodesk evaluates each segment’s performance on the basis of gross profit. Autodesk currently does not separately accumulate and report asset information by segment, except for goodwill, which is disclosed in Note 1, “Business and Summary of Significant Accounting Policies.”

Information concerning the operations of Autodesk’s reportable segments is as follows:

	Fiscal year ended January 31,
	2012			2011			2010
Net revenue:
Platform Solutions and Emerging Business	$	833.1		$	716.2		$	624.0
Architecture, Engineering and Construction	626.4			568.0			513.3
Manufacturing	540.3			470.0			386.9
Media and Entertainment	215.8			197.6			189.1
Other(1)	—			—			0.4
	$	2,215.6		$	1,951.8		$	1,713.7
Gross profit:
Platform Solutions and Emerging Business	$	788.0		$	678.9		$	589.7
Architecture, Engineering and Construction	569.7			517.6			465.2
Manufacturing	496.1			439.5			358.4
Media and Entertainment	174.6			153.9			144.4
Unallocated(2)	(41.9		)	(34.7		)	(35.8		)
	$	1,986.5		$	1,755.2		$	1,521.9
Depreciation and amortization:
Platform Solutions and Emerging Business	$	1.8		$	3.0		$	3.1
Architecture, Engineering and Construction	0.7			1.6			1.8
Manufacturing	1.7			2.3			2.5
Media and Entertainment	0.5			1.1			1.8
Unallocated	110.8			97.4			102.3
	$	115.5		$	105.4		$	111.5

____________________

(1) Other primarily consisted of revenue from Autodesk’s Location Services division, which Autodesk disposed of in February 2009.

(2) Unallocated amounts primarily relate to corporate expenses and other costs and expenses that are managed outside the reportable segments, including stock-based compensation expense.

Information regarding Autodesk’s operations by geographic area is as follows:

	Fiscal year ended January 31,
	2012		2011		2010
Net revenue:
Americas
U.S.	$	631.0	$	561.6	$	527.5
Other Americas	167.5		139.9		126.9
Total Americas	798.5		701.5		654.4
Europe, Middle East and Africa	862.2		782.8		671.1
Asia Pacific
Japan	240.5		200.6		171.1
Other Asia Pacific	314.4		266.9		217.1
Total Asia Pacific	554.9		467.5		388.2
Total net revenue	$	2,215.6	$	1,951.8	$	1,713.7

	January 31,
	2012		2011
Long-lived assets(1):
Americas
U.S.	$	792.5	$	571.2
Other Americas	39.2		65.6
Total Americas	831.7		636.8
Europe, Middle East and Africa
Switzerland	37.7		42.8
Other Europe, Middle East and Africa	83.4		68.5
Total Europe, Middle East and Africa	121.1		111.3
Asia Pacific	50.5		41.9
Total long-lived assets	$	1,003.3	$	790.0

____________________

(1) Long-lived assets exclude investments in subsidiaries, deferred tax assets and marketable securities.

XML

Stockholders Equity

12 Months Ended

Jan. 31, 2012

Stockholders' Equity Attributable to Parent [Abstract]

Stockholders' Equity Note

Stockholders' Equity

Preferred Stock

Under Autodesk’s Certificate of Incorporation, 2.0 million shares of preferred stock are authorized. At January 31, 2012, there were no preferred shares issued or outstanding. The Board of Directors has the authority to issue the preferred stock in one or more series and to fix rights, preferences, privileges and restrictions, including dividends and the number of shares constituting any series or the designation of such series, without any further vote or action by the stockholders.

Common Stock Repurchase Programs

Autodesk has a stock repurchase program that is used largely to help offset the dilution from the issuance of stock under the Company’s employee stock plans and for such other purposes as may be in the interests of Autodesk and its stockholders, and has the effect of returning excess cash generated from the Company's business to stockholders. During fiscal 2012, Autodesk repurchased and retired 9.7 million shares at an average repurchase price of $33.71 per share, 9.0 million shares in fiscal 2011 at an average repurchase price of $31.13 per share and 2.7 million shares in fiscal 2010 at an average repurchase price of $23.63. Common stock and additional paid-in capital and retained earnings were reduced by $211.0 million and $116.4 million, respectively for the year ended January 31, 2012 and $138.3 million and $142.0 million, respectively, for the year ended January 31, 2011, as a result of the stock repurchases.

At January 31, 2012, 14.7 million shares remained available for repurchase under repurchase plans approved by the Board of Directors. In fiscal 2012, 2011 and 2010, Autodesk repurchased its common stock through open market purchases. The number of shares acquired and the timing of the purchases are based on several factors, including general market conditions, the number of employee stock option exercises, stock issuance, the trading price of Autodesk common stock, cash on hand and available in the United States, and company defined trading windows.

XML

Income Taxes Differences between the U.S. statutory rate and the aggregate income tax provision (Details) (USD $) In Millions, unless otherwise specified	3 Months Ended								12 Months Ended
	Jan. 31, 2012	Oct. 31, 2011	Jul. 31, 2011	Apr. 30, 2011	Jan. 31, 2011	Oct. 31, 2010	Jul. 31, 2010	Apr. 30, 2010	Jan. 31, 2012	Jan. 31, 2011	Jan. 31, 2010
Income tax provision at U. S. Federal statutory rate									$ 127.0	$ 95.2	$ 29.7
State income tax expense (benefit), net of the U.S. Federal benefit									2.8	1.4	(0.6)
Foreign income taxed at rates different from the U.S. statutory rate									(61.5)	(39.7)	(22.7)
U.S. valuation allowance									1.7	2.8	14.9
Non-deductible stock-based compensation									12.8	7.9	11.7
Research and development tax credit benefit									(6.0)	(5.6)	(4.7)
Tax benefit from closure of income tax audits and decreases in uncertain tax positions									(0.4)	(2.8)	(2.5)
Officer compensation in excess of $1.0 million									1.9	0.5	0.3
Goodwill impairment									0	0	0
Non-deductible in-process research and development charge									0	0	0
Other									(0.7)	0.3	0.6
Income Tax Expense (Benefit)	20.9	18.5	23.0	15.2	11.4	18.1	20.0	10.5	77.6	60.0	26.7
Expected Future Tax Rate
Other									$ 4.4	$ 2.1	$ 17.7

XML

Borrowing Arrangements

12 Months Ended

Jan. 31, 2012

Borrowing Arrangements

Borrowing Arrangements

During the fiscal year ended January 31, 2012, Autodesk entered into a credit agreement that provides for a $400.0 million unsecured revolving credit facility, with an option to request an increase in the amount of the credit facility by up to an additional $100.0 million. In connection with the execution of this new credit agreement, Autodesk terminated a $250.0 million U.S. line of credit facility on May 26, 2011 that would have expired in August 2012. The new credit agreement contains customary covenants that could restrict the imposition of liens on Autodesk's assets, and restrict the Company's ability to incur additional indebtedness or make dispositions of assets if Autodesk fails to maintain the financial covenants. At January 31, 2012 and January 31, 2011, Autodesk had no outstanding borrowings on either its prior or current line of credit. The new facility expires in May 2016.

XML

Commitments and Contingencies

12 Months Ended

Jan. 31, 2012

Commitments and Contingencies

Commitments and Contingencies

Lease commitments

Autodesk leases office space and computer equipment under non-cancellable operating lease agreements that expire at various dates through 2023. The leases generally provide that Autodesk pay taxes, insurance and maintenance expenses related to the leased assets. Certain of these lease arrangements contain escalation clauses whereby monthly rent increases over time. At January 31, 2012, the aggregate future minimum lease payments required were as follows:

2013	$	50.8
2014	41.4
2015	34.9
2016	30.0
2017	23.9
Thereafter	59.9
	240.9
Less: Sublease income	3.3
	$	237.6

Rent expense related to these operating leases recognized on a straight-line basis over the lease period, was as follows:

	Fiscal Year Ended January 31,
	2012		2011		2010
Rent expense	$	53.0	$	52.1	$	56.8

Purchase commitments

In the normal course of business, Autodesk enters into various purchase commitments for goods or services. Total non-cancellable purchase commitments as of January 31, 2012 were approximately $53.5 millionfor periods through fiscal 2015. These purchase commitments primarily result from contracts for the acquisition of IT infrastructure, marketing and software development services.

Autodesk has certain royalty commitments associated with the shipment and licensing of certain products. Royalty expense is generally based on a dollar amount per unit shipped or a percentage of the underlying revenue. Royalty expense, which was recorded under cost of license and other revenue on Autodesk’s Consolidated Statements of Operations, was $16.5 million in fiscal 2012, $12.8 million in fiscal 2011 and $16.5 million in fiscal 2010.

Indemnifications

In the normal course of business, Autodesk provides indemnifications of varying scopes, including limited product warranties and indemnification of customers against claims of intellectual property infringement made by third parties arising from the use of its products or services. Autodesk accrues for known indemnification issues if a loss is probable and can be reasonably estimated. Historically, costs related to these indemnifications have not been significant, and because potential future costs are highly variable, Autodesk is unable to estimate the maximum potential impact of these indemnifications on its future results of operations.

In connection with the purchase, sale or license of assets or businesses with third parties, Autodesk has entered into or assumed customary indemnification agreements related to the assets or businesses purchased, sold or licensed. Historically, costs related to these indemnifications have not been significant, and because potential future costs are highly variable, Autodesk is unable to estimate the maximum potential impact of these indemnifications on its future results of operations.

As permitted under Delaware law, Autodesk has agreements whereby it indemnifies its officers and directors for certain events or occurrences while the officer or director is, or was, serving at Autodesk’s request in such capacity. The maximum potential amount of future payments Autodesk could be required to make under these indemnification agreements is unlimited; however, Autodesk has directors’ and officers’ liability insurance coverage that is intended to reduce its financial exposure and may enable Autodesk to recover a portion of any future amounts paid. Autodesk believes the estimated fair value of these indemnification agreements in excess of applicable insurance coverage is minimal.

Legal Proceedings

Autodesk is involved in a variety of claims, suits, investigations and proceedings in the normal course of business activities including claims of alleged infringement of intellectual property rights, commercial, employment, piracy prosecution, business practices and other matters. In the Company's opinion, resolution of pending matters is not expected to have a material adverse impact on its consolidated results of operations, cash flows or its financial position. Given the unpredictable nature of legal proceedings, there is a reasonable possibility that an unfavorable resolution of one or more such proceedings could in the future materially affect the Company's results of operations, cash flows or financial position in a particular period, however, based on the information known by the Company as of the date of this filing and the rules and regulations applicable to the preparation of the Company's financial statements, any such amount is either immaterial or it is not possible to provide an estimated amount of any such potential loss.

XML

Interest And Other Income, net

12 Months Ended

Jan. 31, 2012

Interest and Other Income, net [Abstract]

Other Income and Other Expense Disclosure

Interest and Other Income, net

Interest and other income, net, consists of the following:

	Fiscal Year Ended January 31,
	2012			2011			2010
Interest and investment income, net	$	5.7		$	10.9		$	10.0
Gain (loss) on foreign currency	(1.1		)	(14.0		)	5.0
Other Income	2.7			3.7			4.1
Interest and other income, net	$	7.3		$	0.6		$	19.1

XML

Acquisitions - Additional Information (Detail) (USD $) In Millions, unless otherwise specified							12 Months Ended	1 Months Ended
	Mar. 01, 2011 Scaleform Corporation	Mar. 10, 2011 Blue Ridge Numerics, Inc	Aug. 02, 2011 Instructables Corporation	Aug. 24, 2011 TurboSquid Corporation	Oct. 14, 2011 Micro Application Packages Limited	Dec. 21, 2011 T-splines	Jan. 31, 2012 Series of Individually Immaterial Business Acquisitions	Aug. 24, 2011 Maximum
Business Acquisition [Line Items]
Business acquisition, number of acquisitions							17
Business acquisition, total cash consideration	$ 36.2	$ 41.2	$ 30.2	$ 26.0	$ 23.0	$ 23.0	$ 54.8
Related cross-licensing and commercial arrangement, expense								$ 0.2

XML

Deferred Compensation - Additional Information (Detail) (USD $) In Millions, unless otherwise specified	Jan. 31, 2012	Jan. 31, 2011
Deferred Compensation Arrangement with Individual, Excluding Share-based Payments and Postretirement Benefits [Line Items]
Marketable Securities	$ 447.2
Rabbi Trust
Deferred Compensation Arrangement with Individual, Excluding Share-based Payments and Postretirement Benefits [Line Items]
Deferred Compensation Liability, Current and Noncurrent		31.3
Deferred compensation liability current	3.2	3.4
Deferred compensation liability non-current	28.3	27.9
Marketable Securities, Current
Deferred Compensation Arrangement with Individual, Excluding Share-based Payments and Postretirement Benefits [Line Items]
Trading Securities, Fair Value Disclosure		31.3
Marketable Securities, Current | Rabbi Trust
Deferred Compensation Arrangement with Individual, Excluding Share-based Payments and Postretirement Benefits [Line Items]
Trading Securities, Fair Value Disclosure	$ 31.5

XML

Income Taxes - Additional Information (Detail) (USD $)	12 Months Ended
	Jan. 31, 2012	Jan. 31, 2011	Jan. 31, 2010	Jan. 31, 2009
Income Taxes [Line Items]
Increase Decrease In Income taxes Payable Current	$ 31,300,000
Deferred Tax Assets, Tax Deferred Expense, Compensation and Benefits, Employee Benefits	150,100,000
Income (Loss) from Continuing Operations before Income Taxes, Foreign	383,700,000	321,100,000	253,900,000
Deferred Tax Liability Not Recognized, Cumulative Amount of Temporary Difference	1,290,100,000
Deferred Tax Liability Not Recognized, Amount of Unrecognized Deferred Tax Liability	390,900,000
Net deferred tax assets	165,900,000	147,500,000
Foreign Income Tax Expense (Benefit), Continuing Operations	10,400,000	0	0
Income Tax Holiday, Income Tax Benefits Per Share	$ 0.046
Current Foreign Tax Expense (Benefit)	55,900,000	48,400,000	34,100,000
Valuation Allowance, Amount		4,900,000	20,200,000
Income Tax Reconciliation, Closure of Income Tax Audits and Changes in Uncertain Tax Positions		2,800,000	2,500,000
Gross unrecognized tax benefits	201,100,000	188,400,000	178,200,000	169,400,000
Amount of gross unrecognized tax benefits that would impact the effective tax rate, if recognized	187,800,000
Unrecognized Tax Benefits, Interest on Income Taxes Accrued	2,400,000	1,900,000	2,200,000
Deferred Federal Income Tax Expense (Benefit)	(34,500,000)	(8,200,000)	(33,000,000)
Valuation Allowance of Deferred Tax Assets California
Income Taxes [Line Items]
Valuation Allowance, Deferred Tax Asset, Change in Amount	(4,600,000)	(3,900,000)	(14,300,000)
Domestic Country
Income Taxes [Line Items]
Operating Loss Carryforwards	34,200,000
State and Local Jurisdiction
Income Taxes [Line Items]
Operating Loss Carryforwards	306,900,000
Research
Income Taxes [Line Items]
Tax Credit Carryforward, Amount	77,800,000
Change in Tax Status
Income Taxes [Line Items]
Current Foreign Tax Expense (Benefit)	4,000,000
California State Research
Income Taxes [Line Items]
Tax Credit Carryforward, Amount	34,300,000
Canadian
Income Taxes [Line Items]
Tax Credit Carryforward, Amount	50,100,000
Foreign Country
Income Taxes [Line Items]
Tax Credit Carryforward, Amount	$ 60,000,000
Minimum
Income Taxes [Line Items]
Operating Loss Carryforwards, Expiration Dates	2013
Minimum | Federal Research
Income Taxes [Line Items]
Tax Credit Carryforward, Expiration Dates	2013
Minimum | Canadian
Income Taxes [Line Items]
Tax Credit Carryforward, Expiration Dates	2023
Minimum | Foreign Country
Income Taxes [Line Items]
Tax Credit Carryforward, Expiration Dates	2020
Maximum
Income Taxes [Line Items]
Operating Loss Carryforwards, Expiration Dates	2032
Maximum | Federal Research
Income Taxes [Line Items]
Tax Credit Carryforward, Expiration Dates	2032
Maximum | Canadian
Income Taxes [Line Items]
Tax Credit Carryforward, Expiration Dates	2032
Maximum | Foreign Country
Income Taxes [Line Items]
Tax Credit Carryforward, Expiration Dates	2022

XML

Segments (Tables)

12 Months Ended

Jan. 31, 2012

Schedule of Segment Reporting Information, by Segment

Information concerning the operations of Autodesk’s reportable segments is as follows:

	Fiscal year ended January 31,
	2012			2011			2010
Net revenue:
Platform Solutions and Emerging Business	$	833.1		$	716.2		$	624.0
Architecture, Engineering and Construction	626.4			568.0			513.3
Manufacturing	540.3			470.0			386.9
Media and Entertainment	215.8			197.6			189.1
Other(1)	—			—			0.4
	$	2,215.6		$	1,951.8		$	1,713.7
Gross profit:
Platform Solutions and Emerging Business	$	788.0		$	678.9		$	589.7
Architecture, Engineering and Construction	569.7			517.6			465.2
Manufacturing	496.1			439.5			358.4
Media and Entertainment	174.6			153.9			144.4
Unallocated(2)	(41.9		)	(34.7		)	(35.8		)
	$	1,986.5		$	1,755.2		$	1,521.9
Depreciation and amortization:
Platform Solutions and Emerging Business	$	1.8		$	3.0		$	3.1
Architecture, Engineering and Construction	0.7			1.6			1.8
Manufacturing	1.7			2.3			2.5
Media and Entertainment	0.5			1.1			1.8
Unallocated	110.8			97.4			102.3
	$	115.5		$	105.4		$	111.5

____________________

(1) Other primarily consisted of revenue from Autodesk’s Location Services division, which Autodesk disposed of in February 2009.

(2) Unallocated amounts primarily relate to corporate expenses and other costs and expenses that are managed outside the reportable segments, including stock-based compensation expense.

Schedule of Revenue from External Customers and Long-Lived Assets, by Geographical Areas

Information regarding Autodesk’s operations by geographic area is as follows:

	Fiscal year ended January 31,
	2012		2011		2010
Net revenue:
Americas
U.S.	$	631.0	$	561.6	$	527.5
Other Americas	167.5		139.9		126.9
Total Americas	798.5		701.5		654.4
Europe, Middle East and Africa	862.2		782.8		671.1
Asia Pacific
Japan	240.5		200.6		171.1
Other Asia Pacific	314.4		266.9		217.1
Total Asia Pacific	554.9		467.5		388.2
Total net revenue	$	2,215.6	$	1,951.8	$	1,713.7

	January 31,
	2012		2011
Long-lived assets(1):
Americas
U.S.	$	792.5	$	571.2
Other Americas	39.2		65.6
Total Americas	831.7		636.8
Europe, Middle East and Africa
Switzerland	37.7		42.8
Other Europe, Middle East and Africa	83.4		68.5
Total Europe, Middle East and Africa	121.1		111.3
Asia Pacific	50.5		41.9
Total long-lived assets	$	1,003.3	$	790.0

____________________

(1) Long-lived assets exclude investments in subsidiaries, deferred tax assets and marketable securities.

XML

Effects of Derivative Instruments on Condensed Consolidated Statements of Operations (Detail) (Foreign exchange contracts, USD $) In Millions, unless otherwise specified	12 Months Ended
	Jan. 31, 2012	Jan. 31, 2011
Not Designated as Hedging Instrument | Interest and other income (expense), net
Derivative Instruments, Gain (Loss) [Line Items]
Amount and Location of Gain (Loss) Recognized in Income on Derivative	$ (1.3)	$ 2.3
Designated as Hedging Instrument
Derivative Instruments, Gain (Loss) [Line Items]
Amount of Gain (Loss) Recognized in Accumulated OCI on Derivatives (Effective Portion)	12.8	11.8
Amount and Location of Gain (Loss) Reclassified from Accumulated OCI into Income (Effective Portion)	2.7	15.1
Designated as Hedging Instrument | Net revenue
Derivative Instruments, Gain (Loss) [Line Items]
Amount and Location of Gain (Loss) Reclassified from Accumulated OCI into Income (Effective Portion)	(1.9)	13.0
Designated as Hedging Instrument | Operating expenses
Derivative Instruments, Gain (Loss) [Line Items]
Amount and Location of Gain (Loss) Reclassified from Accumulated OCI into Income (Effective Portion)	4.6	2.1
Designated as Hedging Instrument | Interest and other income (expense), net
Derivative Instruments, Gain (Loss) [Line Items]
Amount and Location of Gain (Loss) Recognized in Income on Derivatives (Ineffective Portion and Amount Excluded from Effectiveness Testing)	$ 0.3	$ 0.1

XML

Restructuring Reserve

12 Months Ended

Jan. 31, 2012

Notes to Financial Statements [Abstract]

Restructuring Reserve

Restructuring Reserves

During fiscal 2011, 2010 and 2009 Autodesk initiated restructuring plans (“Fiscal 2011 Plan,” “Fiscal 2010 Plan” and “Fiscal 2009 Plan,” respectively) in order to further reduce operating costs. These restructuring plans resulted in targeted global staff reductions of approximately 200, 430, and 700 positions in fiscal 2011, 2010 and 2009, respectively. No leased facilities were consolidated as part of the Fiscal 2011 Plan. The Fiscal 2010 Plan and Fiscal 2009 Plan resulted in the consolidation of 32 and 27 leased facilities, respectively. In connection with our restructuring plans, we recorded a favorable adjustment for changes in previous estimates during fiscal 2012.

The following table sets forth the restructuring activities for the fiscal years ended January 31, 2012 and 2011.

	Balances, January 31, 2011		Additions		Payments			Adjustments(1)			Balances, January 31, 2012
Fiscal 2011 Plan
Employee termination costs	$	1.5	$	—	$	(1.5	)	$	—		$	—
Fiscal 2010 Plan
Employee termination costs	—		—								—
Lease termination and asset costs	1.7		—		(1.1		)	(0.3		)	0.3
Fiscal 2009 Plan
Employee termination costs	—		—		—			—			—
Lease termination and asset costs	2.8		—		(0.9		)	(1.3		)	0.6
Other
Employee termination costs	—		—		—			—			—
Lease termination costs	2.6		—		(0.8		)	(0.3		)	1.5
Total	$	8.6	$	—	$	(4.3	)	$	(1.9	)	$	2.4
Current portion(2)	$	4.8									$	1.1
Non-current portion(2)	3.8										1.3
Total	$	8.6									$	2.4

____________________

(1) Adjustments include the impact of foreign currency translation.

(2) The current and non-current portions of the reserve are recorded in the Consolidated Balance Sheets under “Other accrued liabilities” and “Other liabilities,” respectively.

	Balances, January 31, 2010		Additions		Payments			Adjustments(1)			Balances, January 31, 2011
Fiscal 2011 Plan
Employee termination costs	$	—	$	12.4	$	(10.6	)	$	(0.3	)	$	1.5
Fiscal 2010 Plan
Employee termination costs	0.8		—		(0.8		)	—			—
Lease termination and asset costs	6.1		0.3		(4.3		)	(0.4		)	1.7
Fiscal 2009 Plan
Employee termination costs	1.0		—		(0.2		)	(0.8		)	—
Lease termination and asset costs	8.2		1.0		(4.6		)	(1.8		)	2.8
Other
Employee termination costs	0.4		—		(0.3		)	(0.1		)	—
Lease termination costs	2.9		—		(0.2		)	(0.1		)	2.6
Total	$	19.4	$	13.7	$	(21.0	)	$	(3.5	)	$	8.6
Current portion(2)	$	11.4									$	4.8
Non-current portion(2)	8.0										3.8
Total	$	19.4									$	8.6

____________________

(1) Adjustments include the impact of foreign currency translation.

(2) The current and non-current portions of the reserve are recorded in the Consolidated Balance Sheets under “Other accrued liabilities” and “Other liabilities,” respectively.

XML

Financial Instruments (Tables)

12 Months Ended

Jan. 31, 2012

Cost and Fair Value of Financial Instruments Disclosure

The following tables summarizes the Company's financial instruments' amortized cost, gross unrealized gains, gross unrealized losses, and fair value by significant investment category as of January 31, 2012 and 2011.

			January 31, 2012
			Amortized Cost		Gross unrealized gains		Gross unrealized losses			Fair Value		Level 1		Level 2		Level 3
Cash equivalents (1):
	Certificates of deposit and time deposits		$	493.6	$	—	$	—		$	493.6	$	11.3	$	482.3	$	—
	Commercial paper		297.9		—		—			297.9		—		297.9		—
	Money market funds		62.1		—		—			62.1		—		62.1		—
Marketable securities:
	Short-term available for sale
		Commercial paper and corporate debt securities	143.7		0.1		—			143.8		35.3		108.5		—
		Certificates of deposit and time deposits	5.2		—		—			5.2		—		5.2		—
		U.S. treasury securities	30.7		—		—			30.7		30.7		—		—
		U.S. government agency securities	38.2		—		—			38.2		38.2		—		—
		Municipal securities	4.7		—		—			4.7		4.7		—		—
		Other	0.3		—		—			0.3		0.3		—		—
	Short-term trading securities
		Mutual funds	29.8		1.8		(0.1		)	31.5		31.5		—		—
	Long-term available for sale
		Corporate debt securities	107.8		1.0		(0.2		)	108.6		108.6		—		—
		U.S. treasury securities	23.6		0.2		—			23.8		23.8		—		—
		U.S. government agency securities	51.4		0.2		—			51.6		51.6		—		—
		Municipal securities	4.6		—		—			4.6		4.6		—		—
		Taxable auction-rate securities	4.2		—		—			4.2		—		—		4.2
Convertible debt securities (2)			18.3		—		—			18.3		—		—		18.3
Derivative contracts (3)			11.6		6.5		(2.2		)	15.9		—		9.7		6.2
		Total	$	1,327.7	$	9.8	$	(2.5	)	$	1,335.0	$	340.6	$	965.7	$	28.7

____________________ 

(1) Included in “Cash and cash equivalents” in the accompanying Consolidated Balance Sheets.

(2) Included in "Other assets" in the accompanying Consolidated Balance Sheets.

(3) Included in “Prepaid expenses and other current assets,” "Other assets," or “Other accrued liabilities” in the accompanying Consolidated Balance Sheets.

			January 31, 2011
			Amortized Cost		Gross unrealized gains		Gross unrealized losses			Fair Value		Level 1		Level 2		Level 3
Cash equivalents (1):
	Certificates of deposit and time deposits		$	383.3	$	—	$	—		$	383.3	$	97.9	$	285.4	$	—
	Commercial paper		331.0		—		—			331.0		—		331.0		—
	Money market funds		43.8		—		—			43.8		—		43.8		—
Marketable securities:
	Short-term available for sale
		Commercial paper and corporate debt securities	47.6		0.1		—			47.7		37.7		10.0		—
		Certificates of deposit and time deposits	29.0		—		—			29.0		25.0		4.0		—
		U.S. treasury securities	26.0		—		—			26.0		26.0		—		—
		U.S. government agency securities	47.2		—		—			47.2		47.2		—		—
		Sovereign debt	9.1		—		—			9.1		—		9.1		—
		Municipal securities	8.6		—		—			8.6		8.6		—		—
		Other	0.3		—		—			0.3		0.3		—		—
	Short-term trading securities
		Mutual funds	29.7		1.7		(0.1		)	31.3		31.3		—		—
	Long-term available for sale
		Corporate debt securities	152.6		1.5		(0.1		)	154.0		154.0		—		—
		U.S. treasury securities	12.7		0.1		—			12.8		12.8		—		—
		U.S. government agency securities	12.7		0.2		—			12.9		12.9		—		—
		Municipal securities	4.7		—		—			4.7		4.7		—		—
		Sovereign debt	3.9		0.1		—			4.0		—		4.0		—
		Taxable auction-rate securities	4.2		—		—			4.2		—		—		4.2
Derivative contracts (2)			3.9		1.9		(1.9		)	3.9		—		3.9		—
		Total	$	1,150.3	$	5.6	$	(2.1	)	$	1,153.8	$	458.4	$	691.2	$	4.2

____________________ 

(1) Included in “Cash and cash equivalents” in the accompanying Consolidated Balance Sheets.

(2) Included in “Prepaid expenses and other current assets,” "Other assets," or “Other accrued liabilities” in the accompanying Consolidated Balance Sheets.

Fair Value, Assets Measured on Recurring Basis, Unobservable Input Reconciliation

A reconciliation of the change in Autodesk’s Level 3 items for the fiscal years ended January 31, 2012 and 2011 was as follows:

	Fair Value Measurements Using Significant Unobservable Inputs
	(Level 3)
		Derivative Contracts		Convertible Debt Securities		Money Market Funds			Taxable Auction-Rate Securities			Total
Balance at January 31, 2010		$	—	$	—	$	10.0		$	7.6		$	17.6
Transfers into (out of) Level 3		—		—		—			—			—
Redemptions		—		—		(11.7		)	(3.4		)	(15.1		)
Total realized/unrealized gains (losses) included in earnings		—		—		1.7			—			1.7
Balance at January 31, 2011		—		—		—			4.2			4.2
Purchases		6.2		18.3		—			—			24.5
Transfers into (out of) Level 3		—		—		—			—			—
Redemptions		—		—		—			—			—
Total realized/unrealized gains (losses) included in earnings		—		—		—			—			—
Balance at January 31, 2012		$	6.2	$	18.3	$	—		$	4.2		$	28.7

Available-for-sale Securities

The following table summarizes the estimated fair value of our “available-for-sale securities” classified by the contractual maturity date of the security:

	January 31, 2012
	Cost		Fair Value
Due in 1 year	$	222.8	$	222.9
Due in 1 year through 5 years	205.7		206.9
Due in 5 years through 10 years	—		—
Due after 10 years	4.2		4.2
Total	$	432.7	$	434.0

Schedule of Derivative Instruments in Statement of Financial Position, Fair Value

The fair value of derivative instruments in Autodesk’s Consolidated Balance Sheets were as follows as of January 31, 2012 and January 31, 2011:

	Balance Sheet Location	Fair Value at
		January 31, 2012		January 31, 2011
Derivative Assets
Foreign currency contracts designated as cash flow hedges	Prepaid expenses and other current assets	$	11.9	$	5.1
Derivatives not designated as hedging instruments	Other assets	6.2		—
Total derivative assets		$	18.1	$	5.1
Derivative Liabilities
Foreign currency contracts designated as cash flow hedges	Other accrued liabilities	$	2.2	$	1.2
Total derivative liabilities		$	2.2	$	1.2

Schedule of Derivative Instruments, Gain (Loss) in Statement of Financial Performance

The effects of derivatives designated as hedging instruments on Autodesk’s Consolidated Statements of Operations were as follows for the fiscal years ended January 31, 2012 and 2011, respectively (amounts presented include any income tax effects):

	Foreign Currency Contracts
	Fiscal Year Ended January 31,
	2012			2011
Amount of gain (loss) recognized in accumulated other comprehensive income ("OCI") on derivatives (effective portion)	$	12.8		$	11.8
Amount and Location of Gain (Loss) Reclassified from Accumulated OCI into Income (Effective Portion)
Net revenue	$	(1.9	)	$	13.0
Operating expenses	4.6			2.1
Total	$	2.7		$	15.1
Amount and Location of Gain (Loss) Recognized in Income on Derivatives (Ineffective Portion and Amount Excluded from Effectiveness Testing)
Interest and other income (expense), net	$	0.3		$	0.1

The effects of derivatives not designated as hedging instruments on Autodesk’s Consolidated Statements of Operations were as follows for the fiscal years ended January 31, 2012 and 2011, respectively (amounts presented include any income tax effects):

	Foreign Exchange Contracts
	Fiscal Year Ended January 31,
	2012			2011
Amount and Location of Gain (Loss) Recognized in Income on Derivative
Interest and other income, net	$	(1.3	)	$	2.3

XML

Reconciliation of the Change in Level 3 Items (Detail) (USD $) In Millions, unless otherwise specified	12 Months Ended
	Jan. 31, 2012	Jan. 31, 2011
Fair Value, Assets Measured on Recurring Basis, Unobservable Input Reconciliation [Line Items]
Beginning Balance	$ 4.2	$ 17.6
Purchases	24.5
Transfers into (out of) Level 3	0	0
Redemptions	0	(15.1)
Total realized/unrealized gains (losses) included in earnings	0	1.7
Ending Balance	28.7	4.2
Derivative
Fair Value, Assets Measured on Recurring Basis, Unobservable Input Reconciliation [Line Items]
Beginning Balance	0	0
Purchases	6.2
Transfers into (out of) Level 3	0	0
Redemptions	0	0
Total realized/unrealized gains (losses) included in earnings	0	0
Ending Balance	6.2	0
Convertible Debt Securities
Fair Value, Assets Measured on Recurring Basis, Unobservable Input Reconciliation [Line Items]
Beginning Balance	0	0
Purchases	18.3
Transfers into (out of) Level 3	0	0
Redemptions	0	0
Total realized/unrealized gains (losses) included in earnings	0	0
Ending Balance	18.3	0
Money Market Funds
Fair Value, Assets Measured on Recurring Basis, Unobservable Input Reconciliation [Line Items]
Beginning Balance	0	10.0
Purchases	0
Transfers into (out of) Level 3	0	0
Redemptions	0	(11.7)
Total realized/unrealized gains (losses) included in earnings	0	1.7
Ending Balance	0	0
Taxable auction rate securities
Fair Value, Assets Measured on Recurring Basis, Unobservable Input Reconciliation [Line Items]
Beginning Balance	4.2	7.6
Purchases	0
Transfers into (out of) Level 3	0	0
Redemptions	0	(3.4)
Total realized/unrealized gains (losses) included in earnings	0	0
Ending Balance	$ 4.2	$ 4.2

XML

Business and Summary of Significant Accounting Policies Other Intangible Assets and Related Accumulated Amortization (Parenthetical) (Details) (USD $) In Millions, unless otherwise specified	Jan. 31, 2012	Jan. 31, 2011
Finite-Lived Intangible Assets [Line Items]
Developed technologies, in-process research and development technology, indefinite lived	$ 1.2	$ 0

XML

CONSOLIDATED STATEMENTS OF CASH FLOWS (USD $) In Millions, unless otherwise specified	12 Months Ended
	Jan. 31, 2012	Jan. 31, 2011	Jan. 31, 2010
Operating activities:
Net income	$ 285.3	$ 212.0	$ 58.0
Adjustments to reconcile net income to net cash provided by operating activities:
Depreciation and amortization	115.5	105.4	111.5
Stock-based compensation expense	108.8	80.7	93.6
Excess tax benefits from stock-based compensation	(31.5)	0	0
Impairment of goodwill	0	0	21.0
Restructuring (benefits) charges, net	(1.3)	10.8	48.2
Changes in operating assets and liabilities, net of business combinations:
Accounts receivable	(71.8)	(40.7)	37.3
Deferred income taxes	(33.8)	(2.1)	(13.5)
Prepaid expenses and other current assets	17.7	(12.9)	4.4
Accounts payable and accrued liabilities	2.6	83.7	(80.3)
Deferred revenue	129.6	71.5	(34.0)
Accrued income taxes	52.4	32.4	0.6
Net cash provided by operating activities	573.5	540.8	246.8
Investing activities:
Purchases of marketable securities	(614.2)	(507.2)	(568.9)
Sales of marketable securities	149.5	135.3	26.4
Maturities of marketable securities	409.6	275.4	328.7
Acquisitions, net of cash acquired	(221.7)	(13.5)	(26.1)
Capital expenditures	(63.0)	(28.3)	(31.7)
Other Investing Activites	(30.5)	(4.0)	(11.4)
Net cash used in investing activities	(370.3)	(142.3)	(283.0)
Financing activities:
Proceeds from issuance of common stock, net of issuance costs	176.1	120.9	70.0
Repurchases of common stock	(327.4)	(280.3)	(63.2)
Draws on line of credit	0	0	2.2
Repayments of line of credit	0	0	(54.3)
Excess tax benefits from stock-based compensation	31.5	0	0
Net cash used in financing activities	(119.8)	(159.4)	(45.3)
Effect of exchange rate changes on cash and cash equivalents	(1.6)	(2.7)	2.6
Net increase (decrease) in cash and cash equivalents	81.8	236.4	(78.9)
Cash and cash equivalents at beginning of fiscal year	1,075.1	838.7	917.6
Cash and cash equivalents at end of fiscal year	1,156.9	1,075.1	838.7
Supplemental Cash Flow Information [Abstract]
Net cash paid during the year for income taxes	$ 63.0	$ 32.5	$ 42.1

XML

Income Taxes

12 Months Ended

Jan. 31, 2012

Income Taxes

Income Taxes

The provision for income taxes consists of the following:

	Fiscal year ended January 31,
	2012			2011			2010
Federal:
Current	$	54.3		$	16.0		$	12.3
Deferred	(34.5		)	(8.2		)	(33.0		)
State:
Current	4.9			(1.5		)	3.0
Deferred	1.3			7.4			7.1
Foreign:
Current	55.9			48.4			34.1
Deferred	(4.3		)	(2.1		)	3.2
	$	77.6		$	60.0		$	26.7

During fiscal year 2012, the Company reduced its current federal and state taxes payable by $31.3 million primarily related to excess tax benefits from non-qualified stock options, offsetting additional paid-in capital. Pursuant to accounting standards related to stock-based compensation, the Company has unrecorded excess stock option tax benefits of $150.1 million as of January 31, 2012. These amounts will be credited to additional paid-in-capital when such amounts reduce cash taxes payable. Foreign pretax income was $383.7 million in fiscal 2012, $321.1 million in fiscal 2011, and $253.9 million in fiscal 2010.

The differences between the U.S. statutory rate and the aggregate income tax provision are as follows:

	Fiscal year ended January 31,
	2012			2011			2010
Income tax provision at U.S. Federal statutory rate	$	127.0		$	95.2		$	29.7
State income tax expense (benefit), net of the U.S. Federal benefit	2.8			1.4			(0.6		)
Foreign income taxed at rates different from the U.S. statutory rate	(61.5		)	(39.7		)	(22.7		)
U.S. valuation allowance	1.7			2.8			14.9
Non-deductible stock-based compensation	12.8			7.9			11.7
Research and development tax credit benefit	(6.0		)	(5.6		)	(4.7		)
Tax benefit from closure of income tax audits and decreases in uncertain tax positions	(0.4		)	(2.8		)	(2.5		)
Officer compensation in excess of $1.0 million	1.9			0.5			0.3
Goodwill impairment	—			—			—
Non-deductible in-process research and development charge	—			—			—
Other	(0.7		)	0.3			0.6
	$	77.6		$	60.0		$	26.7

Significant components of Autodesk’s deferred tax assets and liabilities are as follows:

	January 31,
	2012			2011
Nonqualified stock options	$	71.6		$	69.0
Research and development tax credit carryforwards	49.3			64.0
Foreign tax credit carryforwards	0.1			16.6
Accrued compensation and benefits	35.6			33.7
Other accruals not currently deductible for tax	31.1			20.8
Purchased technology and capitalized software	20.6			25.3
Fixed assets	15.9			15.1
Tax loss carryforwards	12.4			6.3
Other	3.7			2.6
Total deferred tax assets	240.3			253.4
Less: valuation allowance	(47.5		)	(42.9		)
Net deferred tax assets	192.8			210.5
Tax method change on advanced payments	(6.3		)	(9.4		)
Unremitted earnings of foreign subsidiaries	(20.6		)	(53.6		)
Total deferred tax liability	(26.9		)	(63.0		)
Net deferred tax assets	$	165.9		$	147.5

The valuation allowance increased by $4.6 million, $3.9 million and $14.3 million in fiscal 2012, 2011 and 2010, respectively. The fiscal 2012, fiscal 2011, and fiscal 2010 changes in valuation allowance were related to California and Canadian deferred taxes. During the first quarter of fiscal 2010, the State of California enacted legislation significantly altering California tax law. As a result of the newly enacted legislation, Autodesk expects that in fiscal years 2012 and beyond, income subject to tax in California will be less than under prior tax law and accordingly, deferred tax assets are less likely to be realized.

No provision has been made for federal income taxes on unremitted earnings of certain Autodesk's foreign subsidiaries (cumulatively $1,290.1 million at January 31, 2012) because Autodesk plans to reinvest such earnings indefinitely. At January 31, 2012, the net unrecognized deferred tax liability for these earnings was approximately $390.9 million.

Realization of the Company's net deferred tax assets of $165.9 million is dependent upon the Company's ability to generate future taxable income in appropriate tax jurisdictions to obtain benefit from the reversal of temporary differences, net operating loss carryforwards and tax credits. The amount of deferred tax assets considered realizable is subject to adjustment in future periods if estimates of future taxable income are reduced.

As of January 31, 2012, Autodesk had $34.2 million of cumulative federal tax loss carryforwards and $306.9 million of cumulative state tax loss carryforwards, which may be available to reduce future income tax liabilities in certain jurisdictions. These federal and state tax loss carryforwards will expire beginning fiscal 2013 through fiscal 2032 and fiscal 2013 through fiscal 2032, respectively.

As of January 31, 2012, Autodesk had $77.8 million of cumulative federal research tax credit carryforwards, $34.3 million of cumulative California state research tax credit carryforwards and $50.1 million of cumulative Canadian federal tax credit carryforwards, which may be available to reduce future income tax liabilities in the respective jurisdictions. The federal credit carryforwards will expire beginning fiscal 2013 through fiscal 2032, the state credit carryforwards may reduce future California income tax liabilities indefinitely, and the Canadian tax credit carryforwards will expire beginning fiscal 2023 through fiscal 2032. Autodesk also has $60.0 million of cumulative foreign tax credit carryforwards, which may be available to reduce future U. S. tax liabilities. The foreign tax credit will expire beginning fiscal 2020 through fiscal 2022.

Utilization of net operating losses and tax credits may be subject to an annual limitation due to ownership change limitations provided in the Internal Revenue Code and similar state provisions. This annual limitation may result in the expiration of net operating losses and credits before utilization.

As a result of certain business and employment actions and capital investments undertaken by Autodesk, income earned in certain Europe and Asia Pacific countries is subject to reduced tax rates through fiscal 2016 and 2019, respectively. with extensions available with incremental business and employment actions. The income tax benefits attributable to the tax status of these business arrangements are estimated to be $10.4 million in fiscal 2012 ($0.046 basic net income per share) and zero in both fiscal 2011 and 2010. The income tax benefits were offset partially by accruals of U.S. income taxes on undistributed earnings, among other factors.

During fiscal 2012, Autodesk recognized income tax expense of $4.4 million related to California taxes, including an increase in the valuation allowance against California deferred taxes.  Autodesk also recognized tax benefits of $4.0 million related to changes in estimates as a result of U.S. and foreign tax return filings.

During fiscal 2011, Autodesk recognized income tax expense of approximately $2.1 million primarily related to a change in the expected future tax rates and the increase of a valuation allowance against California deferred taxes of $4.9 million partially offset by the closure of audits and other decreases in uncertain tax positions of $2.8 million.

During fiscal 2010, Autodesk recognized income tax expense of approximately $17.7 million primarily related to a change in the expected future tax rates and the establishment of a valuation allowance against California deferred taxes of $20.2 million partially offset by the closure of audits and other decreases in uncertain tax positions with respect to fiscal 2003 of $2.5 million.

As of January 31, 2012, the Company had $201.1 million of gross unrecognized tax benefits, of which $187.8 million would impact the effective tax rate, if recognized. It is possible that the amount of unrecognized tax benefits will change in the next twelve months; however an estimate of the range of the possible change cannot be made at this time.

A reconciliation of the beginning and ending amount of the gross unrecognized tax benefits is as follows:

	2012			2011			2010
Gross unrecognized tax benefits at the beginning of the fiscal year	$	188.4		$	178.2		$	169.4
Increases for tax positions of prior years	0.4			2.0			3.1
Decreases for tax positions of prior years	(0.4		)	(3.5		)	(1.9		)
Increases for tax positions related to the current year	14.3			13.9			11.1
Decreases for lapse of statute of limitations/audit settlements	(1.6		)	(2.2		)	(3.5		)
Gross unrecognized tax benefits at the end of the fiscal year	$	201.1		$	188.4		$	178.2

It is the Company's continuing practice to recognize interest and/or penalties related to income tax matters in income tax expense. The Company had $2.4 million, $1.9 million and $2.2 million, net of tax benefit, accrued for interest and zero accrued for penalties related to unrecognized tax benefits as of January 31, 2012, 2011 and 2010, respectively.

Autodesk and its subsidiaries are subject to income tax in the United States as well as numerous state and foreign jurisdictions. The Company's U.S. and state income tax returns for fiscal year 2003 through fiscal year 2012 remain open to examination. In addition, the Company files tax returns in multiple foreign taxing jurisdictions with open tax years ranging from fiscal year 2003 to 2012.

XML

Employee and Director Stock Plans Employee and Director stock Options Outstanding (Details) (USD $) In Millions, except Per Share data, unless otherwise specified	Jan. 31, 2012		Jan. 31, 2011
Weighted Average Exercise Price	$ 31.39		$ 28.93
Equity Compensation Plans Approved by Security Holders
Number of securities to be issued upon exercise of outstanding options	30.2
Weighted Average Exercise Price	$ 29.38
Shares available for future issuance	47.7	[1]
Equity Compensation Plans Not Approved by Security Holders
Number of securities to be issued upon exercise of outstanding options	0.4	[2]
Weighted Average Exercise Price	$ 11.03	[2]
Shares available for future issuance	0
Equity Compensation Plans
Number of securities to be issued upon exercise of outstanding options	30.6
Weighted Average Exercise Price	$ 29.15
Shares available for future issuance	47.7

[1] Included in this amount are 29.7 million securities available for future issuance under Autodesk’s ESP Plan.

[2] Amounts correspond to Autodesk’s Nonstatutory Stock Option Plan, which was terminated by the Board of Directors in December 2004.

XML

Commitments and Contingencies Commitments and contingencies - additional Information (Details) (USD $) In Millions, unless otherwise specified	12 Months Ended
	Jan. 31, 2012	Jan. 31, 2011	Jan. 31, 2010
Commitments and Contingencies - Additional Information [Abstract]
Total non cancellable purchase commitments	$ 53.5
Total non-cancellable purchase commitments, term	for periods through fiscal 2015.
Royalty expense recorded under cost of license and other revenue	$ 16.5	$ 12.8	$ 16.5

XML

Employee and Director Stock Plans (Tables)

12 Months Ended

Jan. 31, 2012

Schedule of Share-based Compensation, Stock Options, Activity

A summary of stock option activity for the fiscal year ended January 31, 2012 is as follows:

	Number of Shares		Weighted average exercise price per share
	(in millions)
Options outstanding at January 31, 2011	30.4		$	28.93
Granted	5.4		40.71
Exercised	(5.3	)	24.85
Canceled	(2.1	)	36.29
Options outstanding at January 31, 2012	28.4		$	31.39
Options exercisable at January 31, 2012	16.7		$	30.98
Options vested and exercisable as of January 31, 2012 and expected to vest thereafter (1)	27.7		$	31.25
Options available for grant at January 31, 2012	18.0

Intrinsic Value of Options Exercised and Weighted Average Grant Date Fair Value of Stock Options Granted

The following table summarizes information about the pre-tax intrinsic value of options exercised, and the weighted average grant date fair value per share of options granted, during the fiscal years ended January 31, 2012, 2011 and 2010.

	Fiscal year ended January 31,
	2012		2011		2010
Intrinsic value of options exercised (1)	$	85.7	$	61.9	$	18.8
Weighted average grant date fair value per share of stock options granted (2)	$	14.04	$	9.30	$	6.13

——————

(1) The intrinsic value of options exercised is calculated as the difference between the exercise price of the option and the market value of the stock on the date of exercise.

(2) The weighted average grant date fair value per share of stock options granted is calculated, as of the stock option grant date, using the BSM option pricing model.

Schedule of Share-based Compensation, Shares Authorized under Stock Option Plans, by Exercise Price Range

The following table summarizes information about options outstanding and exercisable at January 31, 2012:

	Options Exercisable						Options Outstanding
	Number of Shares (in millions)	Weighted average contractual life (in years)	Weighted average exercise price per share		Aggregate intrinsic value(1) (in millions)		Number of Shares (in millions)	Weighted average contractual life (in years)	Weighted average exercise price per share		Aggregate intrinsic value(1) (in millions)
Range of per-share exercise prices:
$2.28 - $17.37	3.8		$	12.94			5.8		$	13.61
$17.39 - $29.49	2.6		25.81				6.1		27.64
$29.50 - $37.16	4.4		32.94				6.0		32.72
$37.26 - $41.62	2.0		38.40				5.9		40.46
$42.01 - $49.80	3.9		45.69				4.6		45.42
	16.7	2.1	$	30.98	$	127.7	28.4	4.0	$	31.39	$	201.3

____________________ 

(1) Represents the total intrinsic value, based on Autodesk’s closing stock price of $36.00 per share as of January 31, 2012, which would have been received by the option holders had all option holders exercised their options as of that date.

Restricted Share Activity Disclosure

A summary of restricted stock award and restricted stock unit activity for the fiscal year ended January 31, 2012 is as follows:

	Unreleased Restricted Stock		Weighted average grant date fair value
	(in thousands)
Unreleased restricted stock at January 31, 2011	1,426.8		$	30.43
Granted	1,610.5		37.07
Released	(707.6	)	25.95
Canceled	(145.6	)	32.37
Unreleased restricted stock at January 31, 2012	2,184.1		$	36.65

Employee and Director Stock Options Outstanding

Equity Compensation Plan Information

The following table summarizes the number of outstanding options granted to employees and directors, as well as the number of securities remaining available for future issuance under these plans as of January 31, 2012 (number of securities in millions).

	(a)	(b)		(c)
Plan category	Number of securities to be issued upon exercise of outstanding options	Weighted-average exercise price of outstanding options		Number of securities remaining available for future issuance under equity compensation plans (excluding securities reflected in column (a))
Equity compensation plans approved by security holders	30.2	$	29.38	47.7	(1)
Equity compensation plans not approved by security holders(2)	0.4	$	11.03	—
Total	30.6	$	29.15	47.7

____________________ 

(1) Included in this amount are 29.7 million securities available for future issuance under Autodesk’s ESP Plan.

(2) Amounts correspond to Autodesk’s Nonstatutory Stock Option Plan, which was terminated by the Board of Directors in December 2004.

XML

Computation of the Numerators and Denominators Used in the Basic and Diluted Net Income Per Share Amounts (Detail) (USD $) In Millions, except Per Share data, unless otherwise specified	3 Months Ended								12 Months Ended
	Jan. 31, 2012	Oct. 31, 2011	Jul. 31, 2011	Apr. 30, 2011	Jan. 31, 2011	Oct. 31, 2010	Jul. 31, 2010	Apr. 30, 2010	Jan. 31, 2012	Jan. 31, 2011	Jan. 31, 2010
Numerator:
Net income	$ 72.0	$ 72.8	$ 71.2	$ 69.3	$ 61.6	$ 53.6	$ 59.9	$ 36.9	$ 285.3	$ 212.0	$ 58.0
Denominator:
Denominator for basic net income per share-weighted average shares									227.7	227.6	228.7
Effect of dilutive securities									5.6	6.6	3.4
Denominator for dilutive net income per share									233.3	234.2	232.1
Basic net income per share	$ 0.32	$ 0.32	$ 0.31	$ 0.30	$ 0.27	$ 0.24	$ 0.26	$ 0.16	$ 1.25	$ 0.93	$ 0.25
Diluted net income per share	$ 0.31	$ 0.32	$ 0.30	$ 0.29	$ 0.26	$ 0.23	$ 0.25	$ 0.16	$ 1.22	$ 0.90	$ 0.25

XML

Business and Summary of Significant Accounting Policies Geographical Concentration of Consolidated Cash, Cash Equivalents and Marketable Securities (Details)	Jan. 31, 2012	Jan. 31, 2011	Jan. 31, 2010
Concentration Risk [Line Items]
Concentration Risk, Percentage	21.00%	22.00%	21.00%
United States
Concentration Risk [Line Items]
Concentration Risk, Percentage	11.00%	14.00%
Other Americas
Concentration Risk [Line Items]
Concentration Risk, Percentage	1.00%	1.00%
Europe, Middle East and Africa (EMEA)
Concentration Risk [Line Items]
Concentration Risk, Percentage	51.00%	49.00%
Asia Pacific (APAC)
Concentration Risk [Line Items]
Concentration Risk, Percentage	37.00%	36.00%

XML

Retirement Benefit Plans

12 Months Ended

Jan. 31, 2012

Retirement Benefit Plans [Abstract]

Pension and Other Postretirement Benefits Disclosure

Retirement Benefit Plans

Pretax Savings Plan

Autodesk has a 401(k) plan that covers nearly all U.S. employees. Eligible employees may contribute up to 50% of their pretax salary, subject to limitations mandated by the Internal Revenue Service. Autodesk makes voluntary cash contributions and matches a portion of employee contributions in cash. Autodesk’s contributions were $7.3 million in fiscal 2012, $6.7 million in fiscal 2011 and $7.1 million in fiscal 2010. Autodesk does not allow participants to invest in Autodesk common stock through the 401(k) plan.

Other Plans

Autodesk provides certain defined benefit pension plans to employees primarily located in countries outside of the U.S. The Company deposits funds for specific plans, consistent with the requirements of local law, with insurance companies or third-party trustees, and accrues for the unfunded portion of the obligation, where material. The assumptions used in calculating the obligation for these plans depend on the local economic environment. The net liability related to the funded status of the plans was approximately $18.0 million and $18.2 million as of January 31, 2012 and 2011, respectively. The projected benefit obligation was $52.8 million and $47.3 million as of January 31, 2012 and 2011, respectively. The related fair value of plan assets was $34.8 million and $29.1 million as of January 31, 2012 and 2011, respectively. Our practice is to fund the pension plans in amounts at least sufficient to meet the minimum requirements of local laws and regulations. The assets of the plans are primarily invested in high quality fixed income investments. Our contributions were approximately $4.2 million, $3.5 million and $3.4 million in fiscal 2012, 2011 and 2010, respectively. As of January 31, 2012, our estimated future benefit payments are an aggregate $10.2 million for fiscal 2013 through fiscal 2017 and an aggregate of $7.9 million for fiscal 2018 through fiscal 2022. Autodesk recorded $8.2 million and $9.8 million of unrealized changes in the unfunded portion of Autodesk’s defined benefit plans in fiscal 2012 and fiscal 2011, respectively.

Autodesk also provides defined contribution plans in certain foreign countries where required by statute. Autodesk’s funding policy for foreign defined contribution plans is consistent with the local requirements in each country. Autodesk’s contributions to these plans were $20.4 million in fiscal 2012, $13.6 million in fiscal 2011 and $13.4 million in fiscal 2010.

In addition, Autodesk offers a non-qualified deferred compensation plan to certain key employees whereby they may defer a portion (or all) of their annual compensation until retirement or a different date specified by the employee in accordance with terms of the plan. See Note 6, “Deferred Compensation,” for further discussion.