UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, DC 20549

FORM 6-K

Report of Foreign Private Issuer

Pursuant to Rule 13a-16 or 15d-16

Under the Securities Exchange Act of 1934

For the month of March, 2017

Cameco Corporation

(Commission file No. 1-14228)

2121-11th Street West

Saskatoon, Saskatchewan, Canada S7M 1J3

(Address of Principal Executive Offices)

Indicate by check mark whether the registrant files or will file annual reports under cover Form 20-F or Form 40-F.

Form 20-F  ☐             Form 40-F  ☒            

Indicate by check mark whether the registrant by furnishing the information contained in this Form is also thereby furnishing the information to the Commission pursuant to Rule 12g3-2(b) under the Securities Exchange Act of 1934.

Yes  ☐             No  ☒            

If “Yes” is marked, indicate below the file number assigned to the registrant in connection with Rule 12g3-2(b):

Exhibit Index

Exhibit No.	Description	Page No.
1.	Press Release dated March 23, 2017
2.	Inkai Technical Report dated March 23, 2017

SIGNATURE

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

Date: March 24, 2017	Cameco Corporation
	By:
	“Sean A. Quinn”
	Sean A. Quinn
	Senior Vice-President, Chief Legal Officer and Corporate Secretary

Page 2

TSX: CCO NYSE: CCJ website: cameco.com currency: Cdn (unless noted)

2121 – 11^th Street West, Saskatoon, Saskatchewan, S7M 1J3 Canada

Tel: (306) 956-6200 Fax: (306) 956-6201

Cameco Reports Document Filings

Saskatoon, Saskatchewan, Canada, March 23, 2017    .    .    .    .    .    .    .    .    .     .    .    .    .    .

Cameco (TSX: CCO; NYSE: CCJ) reported today that it filed its annual report on Form 40-F with the US Securities and Exchange Commission. The document includes Cameco’s audited annual financial statements for the year ended December 31, 2016, its management’s discussion and analysis (MD&A), and its Canadian annual information form (AIF).

In addition, Cameco filed with Canadian securities regulatory authorities its AIF. Its audited annual financial statements for the year ended December 31, 2016, and its MD&A were filed with Canadian securities regulatory authorities in February 2017.

Cameco also filed a technical report for the Inkai operation under Canadian Securities Administrators’ National Instrument 43-101.

All of these documents are posted on our website. Shareholders may obtain hard copies of these documents, including the financial statements, free of charge by contacting:

Cameco Investor Relations

2121 11th Street West

Saskatoon, SK S7M 1J3

Phone: (306) 956-6340

On April 7, 2017, Cameco plans to post on its website the management proxy circular that is being distributed to shareholders of record as of March 14, 2017 for its annual meeting of shareholders on May 11, 2017.

Profile

Cameco is one of the world’s largest uranium producers, a significant supplier of conversion services and one of two CANDU fuel manufacturers in Canada. Our competitive position is based on our controlling ownership of the world’s largest high-grade mineral reserves and low-cost operations. Our uranium products are used to generate clean electricity in nuclear power plants around the world. We also explore for uranium in the Americas, Australia and Asia. Our shares trade on the Toronto and New York stock exchanges. Our head office is in Saskatoon, Saskatchewan.

- End -

Investor inquiries:	Cory Kos	(306) 956-8176
Media inquiries:	Gord Struthers	(306) 956-6593

- 2 -

Inkai Operation

South Kazakhstan Oblast,

Republic of Kazakhstan

National Instrument 43-101

Technical Report

Effective Date: December 31, 2016

Date of Technical Report: March 23, 2017

PREPARED FOR CAMECO CORPORATION BY:

DARRYL CLARK, PhD, P. GEO.

ALAIN G. MAINVILLE, P. GEO.

STUART B. SOLIZ, P. GEO.

ROBERT J. SUMNER, PhD, P. ENG.

TABLE OF CONTENTS

1	SUMMARY			8
	1.1	Operation overview		8
	1.2	2016 Implementation agreement		8
	1.3	Property tenure		9
	1.4	Location and existing infrastructure		10
	1.5	Geology and mineralization		10
	1.6	Exploration and delineation		11
	1.7	Block 3 appraisal program		11
	1.8	Blocks 1 and 2 development		12
	1.9	Mineral resources and mineral reserves		12
	1.10	Mining		14
	1.11	Processing		15
	1.12	Environmental assessment and licensing		15
	1.13	Production plan and mine life		16
	1.14	Capital and operating cost estimates		17
	1.15	Regulatory risks		17
	1.16	Conclusions and recommendations		17
2	INTRODUCTION			19
	2.1	Introduction and purpose		19
	2.2	Report basis		19
3	RELIANCE ON OTHER EXPERTS			21
4	PROPERTY DESCRIPTION AND LOCATION			22
	4.1	Location		22
	4.2	Exploration and mining licences		23
	4.3	Surface tenure		23
	4.4	Resource Use Contract		24
	4.5	Subsoil Law		24
		4.5.1	Stabilization clause	25
		4.5.2	Transfer of subsoil use rights and pre-emptive rights	25
		4.5.3	Dispute resolution	26
		4.5.4	Contract termination	26
		4.5.5	Work programs and project documentation	27
		4.5.6	Procurement requirements	27
		4.5.7	Local content requirements	27
		4.5.8	Strategic deposits	28
	4.6	Draft Subsoil Code		28

i 2017 INKAI OPERATION TECHNICAL REPORT

		4.6.1	Re-introduction of the licencing regime	29
		4.6.2	Stabilization clause	29
		4.6.3	Dispute resolution	29
		4.6.4	Transfer of subsoil use rights and pre-emptive rights	29
	4.7	Strategic object		30
	4.8	Taxes and royalties		30
	4.9	Known environmental liabilities		31
	4.10	Permitting		31
	4.11	Factors affecting access to the property		31
5	ACCESSIBILITY, CLIMATE, LOCAL RESOURCES, INFRASTRUCTURE AND PHYSIOGRAPHY			32
	5.1	Access		32
	5.2	Climate		32
	5.3	Physiography		32
	5.4	Local resources		32
	5.5	Infrastructure		33
6	HISTORY			35
	6.1	Ownership		35
	6.2	Exploration and development history		35
	6.3	Historical mineral resource and mineral reserve		36
	6.4	Historical production		36
7	GEOLOGICAL SETTING AND MINERALIZATION			37
	7.1	Regional geology		37
		7.1.1	Hydrostratigraphy of the Chu-Sarysu Basin	38
	7.2	Local and property geology		38
		7.2.1	Local hydrogeology	41
		7.2.2	Hydraulic connectivity	43
		7.2.3	Piezometric measurements	44
		7.2.4	Groundwater chemistry	44
	7.3	Mineralization		45
		7.3.1	Host rocks	45
		7.3.2	Oxidation and mineralization	47
		7.3.3	Geometry	48
		7.3.4	Mineralogy	49
8	DEPOSIT TYPES			52
	8.1	Roll-front deposits		52
		8.1.1	Oxidation state	52
9	EXPLORATION			54
10	DRILLING			55

ii 2017 INKAI OPERATION TECHNICAL REPORT

	10.1	Uranium exploration and delineation drilling		55
	10.2	Methodology and guidelines		55
		10.2.1	Timeline for exploration-delineation drilling programs	55
	10.3	Factors that could materially affect the accuracy of the results		56
11	SAMPLE PREPARATION, ANALYSES AND SECURITY			58
	11.1	Sample density		58
	11.2	Core recovery		58
	11.3	Procedure for sampling and sample preparation		58
	11.4	Assaying		59
	11.5	Geophysical logging		59
		11.5.1	Radiometric probing	59
		11.5.2	Caliper logging	60
		11.5.3	Hole deviations	60
		11.5.4	Resistivity and self-polarization	60
	11.6	Density determinations		60
	11.7	Quality assurance / quality control		60
	11.8	Adequacy of sample preparation, assaying, QA/QC and security		61
12	DATA VERIFICATION			62
	12.1	Blocks 1 and 2		62
		12.1.1	Radioactivity, radium and uranium grades	63
	12.2	Block 3		63
	12.3	Opinion on adequacy of data		63
13	MINERAL PROCESSING AND METALLURGICAL TESTING			64
	13.1	Main Processing Plant and Satellite 1		64
	13.2	Block 3 and Test Leach Facility		64
14	MINERAL RESOURCE ESTIMATES			66
	14.1	Key assumptions, parameters and methods		66
		14.1.1	Key assumptions	68
		14.1.2	Key parameters	68
		14.1.3	Key methods	68
		14.1.4	Resource classification	69
		14.1.5	Mineral resource estimate	72
		14.1.6	Changes to mineral resources	73
	14.2	Factors that could materially affect the mineral resource estimate		73
15	MINERAL RESERVE ESTIMATES			74
	15.1	Definitions		74
	15.2	Key assumptions, parameters and method		74
		15.2.1	Modifying factors	74
		15.2.2	Key assumptions	75

iii 2017 INKAI OPERATION TECHNICAL REPORT

		15.2.3	Key parameters	75
		15.2.4	Key methods	75
		15.2.5	Reserve classification	75
		15.2.6	Cut-off	76
		15.2.7	Mineral reserve estimate	76
		15.2.8	Changes to mineral reserves	77
	15.3	Factors that could materially affect the mineral reserve estimate		78
16	MINING METHODS			79
	16.1	Mining		79
		16.1.1	Mining method	80
		16.1.2	Production objectives	80
		16.1.3	Wellfield design and development	81
		16.1.4	Wellfield production	83
17	RECOVERY METHODS			85
	17.1	Processing facilities		85
	17.2	Ion exchange resin adsorption (loading)		85
	17.3	Resin elution (stripping)		85
	17.4	Denitrification		86
	17.5	Precipitation		86
	17.6	Yellowcake product thickening and dewatering		86
	17.7	Filter press operation		86
	17.8	Drying		86
	17.9	Packaging		86
	17.10	Overall uranium recovery		86
18	PROJECT INFRASTRUCTURE			88
19	MARKET STUDIES AND CONTRACTS			90
	19.1	Markets		90
	19.2	Uranium sales contracts		91
	19.3	Material contracts		91
20	ENVIRONMENTAL STUDIES, PERMITTING AND SOCIAL OR COMMUNITY IMPACT			92
	20.1	Environmental considerations		92
		20.1.1	Legislation	92
		20.1.2	Permitting	92
		20.1.3	Environmental impact assessment	93
		20.1.4	Decommissioning and restoration	94
		20.1.5	Known environmental liabilities	94
	20.2	Social and community factors		95
21	CAPITAL AND OPERATING COSTS			97

iv 2017 INKAI OPERATION TECHNICAL REPORT

	21.1	Capital cost estimates		97
	21.2	Operating cost estimates		97
22	ECONOMIC ANALYSIS			99
23	ADJACENT PROPERTIES			99
24	OTHER RELEVANT DATA AND INFORMATION			100
	24.1	Block 3 appraisal program		100
	24.2	Cameco funding of Block 3 appraisal program		100
	24.3	2016 Implementation Agreement		101
	24.4	Currency control regulations		102
	24.5	Regulatory risks		102
		24.5.1	Kazakhstan laws and regulations	102
		24.5.2	Compliance with legal requirements	103
		24.5.3	2016 Implementation Agreement regulatory approvals	104
		24.5.4	Extension of Block 3 exploration period	104
	24.6	Caution about forward-looking information		104
25	INTERPRETATION AND CONCLUSIONS			107
26	RECOMMENDATIONS			108
27	REFERENCES			109
28	DATE AND SIGNATURE PAGE			111

v 2017 INKAI OPERATION TECHNICAL REPORT

TABLES

Table 1-1: Summary Of Mineral Resources – December 31, 2016	13
Table 1-2: Summary Of Mineral Reserves – December 31, 2016	14
Table 3-1: Reliance On Other Experts	21
Table 6-1: Historical Drilling	35
Table 6-2: Inkai Block 1 And Block 2 Uranium Production	36
Table 7-1: Hydraulic Conductivity	43
Table 7-2: Horizons And Subhorozons Division	45
Table 10-1: Delineation Drilling At Inkai	55
Table 13-1: Key Species In The Block 3 Composite Samples	65
Table 14-1: Cut-Offs And Additional Estimation Parameters	69
Table 14-2: Summary Of Mineral Resources – December 31, 2016	72
Table 14-3: Changes In Mineral Resources	73
Table 15-1: Summary Of Mineral Reserves – December 31, 2016	77
Table 15-2: Changes In Mineral Reserves	78
Table 16-1: Production Schedule	84
Table 19-1: 2016 World Uranium Production	90
Table 21-1: Capital Cost Forecast By Year – 100% Basis	98
Table 21-2: Operating Cost Forecast By Year – 100% Basis	98

FIGURES

Figure 1-1: Annual Production Plan - 100% Basis	17
Figure 4-1: Location Map	22
Figure 5-1: General Location Map	34
Figure 7-1: Schematic Cross-Section Of The Chu-Sarysu Basin – Looking West	37
Figure 7-2: Schematic Stratigraphic Column For The Chu-Sarysu Basin	40
Figure 7-3: Inkai Uranium Roll Front	46
Figure 7-4: Roll-Front Morphology Of Mineralization	50
Figure 7-5: Typical Characteristics Of A Roll-Front Deposit	51
Figure 10-1: Drill Hole Collar Location Map	57
Figure 14-1: Blocks 1 And 2 - Total Mineral Resources By Cim Classification	71
Figure 16-1: In-Situ Recovery Schematic	79
Figure 16-2: Recovery Curves For Block 1 Wellfields	82
Figure 16-3: Recovery Curves For Block 2 Wellfields	82
Figure 16-4: Annual Production Plan – 100% Basis	84
Figure 17-1: Flowsheet Based On Annual Production Of 5.2 Mlbs U308	87
Figure 18-1: Infrastructure General Arrangement	89

vi 2017 INKAI OPERATION TECHNICAL REPORT

UNITS OF MEASURE AND ABBREVIATIONS

°C	Degrees Celsius
$	Canadian dollars
>	Greater than
<	Less than
%	Percent
a	Annum (year)
d	Day
g	Grams
GT	Grade multiplied by Thickness
h	Hour(s)
K	Thousand
km2	Square kilometres
L	Litre
Lbs	Pounds
M	Million
m	Metres
m%U3O8	Metres times percent uranium oxide
m/d	Metres per Day
mm	Millimetres
t	Tonnes (metric)
U	Uranium (1 tonne U = 2,599.8 Lbs U3O8)
%U	Percent uranium (%U x 1.179 = % U3O8)
U3O8	Uranium oxide (yellowcake)
%U3O8	Percent uranium oxide (%U3O8 x 0.848 = %U)
UF6	Uranium hexafluoride

7 2017 INKAI OPERATION TECHNICAL REPORT

1 Summary

Inkai is a material property for Cameco Corporation (Cameco) under Canadian securities laws.

This technical report has been prepared for Cameco by internal Qualified Persons (QP) in support of the disclosure of scientific and technical information relating to Inkai contained in Cameco’s annual Management’s Discussion and Analysis for the year ended December 31, 2016 filed with Canadian securities regulators on February 9, 2017, and Cameco’s Annual Information Form and Form 40-F for the year ended December 31, 2016.

All monetary references in this technical report are expressed in Canadian dollars, unless otherwise indicated.

1.1 Operation overview

Inkai is an in-situ recovery (ISR) producing mine in the Central Asian Republic of Kazakhstan, made up of three contiguous licence blocks:

• Block 1 –16.6 square kilometres

• Block 2 –230 square kilometres

• Block 3 –240 square kilometres

Inkai is owned and operated by Joint Venture Inkai Limited Liability Partnership (JV Inkai), an entity which is owned by Cameco (60%) and Joint Stock Company “National Atomic Company Kazatomprom” (Kazatomprom) (40%). The Republic of Kazakhstan owns Joint Stock Company Sovereign Wealth Fund “Samruk-Kazyna”, who is the sole shareholder of Kazatomprom.

Inkai’s mineral reserves and resources reported by Cameco are located at Blocks 1 and 2. An ISR test is currently in progress at Block 3 in order to demonstrate Block 3’s technical and economic viability. Total packaged production from Blocks 1 and 2 from 2009 to the end of 2016 is 36.7 million pounds of U₃O₈ (Cameco’s share 21.5 million pounds).

1.2 2016 Implementation agreement

Cameco, Kazatomprom and JV Inkai signed an agreement (Implementation Agreement) dated May 27, 2016, to restructure and enhance Inkai. Subject to closing, the Implementation Agreement provides as follows:

• JV Inkai will have the right to produce 4,000 tonnes of uranium (tU) (10.4 million pounds of U₃O₈) per year (Cameco’s share 4.2 million pounds), an increase from the current 5.2 million pounds (Cameco’s share 3.0 million pounds)

• JV Inkai will have the right to produce from Blocks 1, 2 and 3 until 2045 (currently, the licence terms are to 2024 for Block 1 and to 2030 for Blocks 2 and 3)

• subject to further adjustments tied to the construction of a refinery as described below, Cameco’s ownership interest in JV Inkai will be adjusted to 40%, and Kazatomprom’s ownership interest in JV Inkai will be adjusted to 60%. However the Implementation Agreement ensures that during production ramp up, Cameco’s share of annual production remains at 57.5% on the first 5.2 million pounds of U₃O₈. As annual production increases above 5.2 million pounds, Cameco will be entitled to 22.5% of any incremental production, to the maximum annual share of 4.2 million pounds of U₃O₈. Once the ramp up to 10.4 million pounds of U₃O₈ annually is complete, Cameco’s interest in production will be adjusted to match its ownership interest at 40%.

• a governance framework that provides protection for Cameco as a minority owner of JV Inkai

8 2017 INKAI OPERATION TECHNICAL REPORT

• the current boundaries of Blocks 1, 2 and 3 will be adjusted to match the agreed production profile for Inkai to 2045

• the loan made by a Cameco subsidiary to JV Inkai to fund exploration and evaluation of Block 3 will be paid on a priority basis

The Implementation Agreement is subject to obtaining all required government approvals, including certain amendments to JV Inkai’s Resource Use Contract. In February 2017, Cameco estimated it would take 10 to 18 months to obtain the required approvals. The agreement provides for annual production at Inkai to be ramped up to 10.4 million pounds of U₃O₈ over three years following receipt of the required approvals.

The Implementation Agreement also provides that Cameco and Kazatomprom will complete a feasibility study for the purpose of evaluating the design, construction and operation of a uranium refinery in Kazakhstan. If Cameco and Kazatomprom decide to build the refinery, the agreement also provides that Cameco’s ownership interest in JV Inkai will be increased to 42.5% upon commissioning of the refinery and, depending on the level of commercial support Cameco provides, may be increased further to 44%. The agreement also grants Kazatomprom a five-year option to license Cameco’s proprietary uranium conversion technology for purposes of constructing and operating a UF₆ conversion facility in Kazakhstan, if Cameco and Kazatomprom decide to build the refinery.

For more information, see Section 24.3 2016 Implementation Agreement.

The technical and scientific information in this technical report does not reflect the material changes that would result upon closing of the Implementation Agreement since it is still subject to obtaining all required government approvals. If the Implementation Agreement closes, the estimated mineral resources and mineral reserves of Inkai and Cameco’s share will change materially.

1.3 Property tenure

In April 1999, the government of Kazakhstan granted JV Inkai a mining licence for Block 1 and an exploration with subsequent mining licence for Blocks 2 and 3. The associated subsoil use contract (Resource Use Contract), covering both licences, was signed by the Republic of Kazakhstan and JV Inkai in July, 2000. The Block 1 licence expires in 2024 and the Blocks 2 and 3 licence expires in 2030 (Licences).

JV Inkai also has obligations under the Licences and the Resource Use Contract which it must comply with in order to maintain its rights to Blocks 1, 2 and 3. There have been five amendments to the Resource Use Contract. The most recent amendment was in November 2016 to extend the exploration period at Block 3 until July 13, 2018.

In addition to complying with its obligations under the Licences and the Resource Use Contract, JV Inkai, like all subsoil users, is required to abide by the work program appended to its Resource Use Contract, which relates to its mining operations.

Under Kazakhstan law, subsoil and mineral resources belong to the state. Currently, the state provides access to subsoil and mineral resources under a resource use contract. Minerals extracted from subsoil by a subsoil user under a resource use contract are the property of the subsoil user unless the Law on the Subsoil and Subsoil Use, dated June 24, 2010, as amended (Subsoil Law) or a resource use contract provides otherwise.

Under the Resource Use Contract and the Licences, JV Inkai has the rights to explore for and to extract uranium from the subsoil. JV Inkai owns uranium extracted from the subsoil, and has the right to use the surface of the lands.

A subsoil use contract gives the contractor a right to use the surface of the property while exploring, mining and reclaiming the land. However, this right must be set forth in a surface lease agreement with the applicable local administrative authorities.

On a regular basis, JV Inkai obtains from local authorities the necessary surface lease agreements for new

9 2017 INKAI OPERATION TECHNICAL REPORT

buildings and infrastructure. JV Inkai does not hold surface leases for the entire area that is subject to the Licences. JV Inkai obtains surface leases gradually only for surface area required for exploration, mining or construction of new infrastructure.

For more information, see Sections 4.1 to 4.5.

1.4 Location and existing infrastructure

Inkai is located in the Suzak District of South-Kazakhstan Oblast, Kazakhstan, near the town of Taikonur. It is approximately 350 kilometres northwest of the city of Shymkent and approximately 155 kilometres east of the city of Kyzl-Orda. Inkai is accessible by road from Shymkent (470 kilometres) and from Kyzl-Orda (290 kilometres). JV Inkai’s corporate office is located in Shymkent.

There are three surface processing facilities at Inkai:

• main processing plant (MPP) located on Block 1

• satellite 1 (Sat1) located on Block 2

• test leach facility (TLF) located on Block 3

The MPP has an ion exchange (IX) capacity of 2.7 million pounds of U₃O₈ per year and a product recovery drying and packaging capacity of 8.1 million pounds of U₃O₈ per year. Sat1 has an IX capacity of 6.3 million pounds of U₃O₈ per year. The TLF is currently operated as part of a test campaign to assess the commercial viability of Block 3.

The following are located at Block 1: an administrative office, shops, garage, holding ponds, laboratory and emergency response building, enclosures for low-level radioactive waste and domestic waste, reagent storage tanks, food services facilities, engineering and construction offices, wellfield pipelines, header houses, roads, and powerlines. At Block 2, there is an office, shops, holding ponds, reagents storage tanks, a food services facility, wellfield pipelines, header houses, roads, and powerlines. At Block 3, there is an office, shops, holding ponds, reagent storage tanks, a food services facility, wellfield pipelines, header houses, roads, and powerlines. At Taikonur, JV Inkai has a camp for 429 employees with catering and leisure facilities.

1.5 Geology and mineralization

South-central Kazakhstan geology is comprised of a large relatively flat basin of Cretaceous to Quaternary age continental clastic sedimentary rocks. The Chu-Sarysu Basin extends for more than 1,000 kilometres from the foothills of the Tien Shan Mountains located on south and southeast sides of the basin, and merges into the flats of the Aral Sea depression to the northwest. The basin is up to 250 kilometres wide, bordered by the Karatau Mountains on the southwest and the Kazakh Uplands on the northeast. The basin is composed of gently dipping to nearly flat lying fluvial-derived unconsolidated sediments composed of inter-bedded sand, silt and local clay horizons.

The Cretaceous and Paleogene sediments contain several stacked and relatively continuous, sinuous “roll-fronts” or oxidation-reduction (redox) fronts hosted in the more porous and permeable sand and silt units. Several uranium deposits and active ISR uranium mines are located at these regional oxidation roll-fronts, developed along a regional system of superimposed mineralization fronts. The overall stratigraphic horizon of interest in the basin is approximately 200 to 250 metres in vertical section.

The Inkai deposit is one of these roll-front deposits. It is hosted within the Inkuduk and Mynkuduk Formations which comprise fine, medium and coarse-grain sands, gravels and clays. The redox boundary can be readily recognised in core by a distinct colour change from grey and greenish-grey on the reduced side to light-grey with yellowish stains on the oxidized side, stemming from the oxidation of pyrite to limonite.

The sands have high horizontal hydraulic conductivities. Hydrogeological parameters of the deposit play a key role in ISR mining. Studies and mining results indicate Inkai has favourable hydrogeological conditions for ISR mining.

10 2017 INKAI OPERATION TECHNICAL REPORT

Ten mineralized zones have been identified in Blocks 1, 2 and 3. These include four zones in the Mynkuduk horizon and six zones in the Inkuduk horizon. The bulk of the uranium mineralization in Block 1 is contained in the Mynkuduk horizon which extends over more than 10 kilometres. This horizon is at an average depth of about 490 metres. Mineralization in Block 2 is contained primarily in the Lower and Middle Inkuduk horizons at average depths of 390 and 340 metres below surface. It extends over more than 35 kilometres. The bulk of the mineralization in Block 3 is contained in the Lower and Middle Inkuduk horizons extending over more than 25 kilometres at average depths of 360 and 330 metres below surface.

Mineralization comprises sooty pitchblende (85%) and coffinite (15%). The pitchblende occurs as micron-sized globules and spherical aggregates, while the coffinite forms tiny crystals. Both uranium minerals occur in pores on interstitial materials such as clay minerals, as films around and in cracks within sand grains, and as replacements of rare organic matter, and are commonly associated with pyrite.

1.6 Exploration and delineation

Exploration at Inkai began in the 1970s and progressed until 1996. Since 2006 exploration and delineation drilling has been conducted by JV Inkai.

Blocks 1 and 2 exploration and delineation programs

No exploration activity was conducted by JV Inkai at Blocks 1 and 2 before 2013. From 2013 to 2016, delineation drilling was conducted at Block 1 (67 drillholes) and Block 2 (280 drillholes) to better establish the mineralization distribution and to support further development and wellfield design.

Block 3 exploration and delineation programs

Exploration and delineation work was completed at the northern flank (Block 3) of the Inkai deposit by JV Inkai from 2006 to 2016.

During the period from 2006 to 2013, an extensive exploration-delineation drilling program was carried out at Block 3, consisting of 3,640 drillholes. This was in addition to the historic 489 holes drilled prior to JV Inkai obtaining it licenses for Inkai.

The first phase of the drilling program, from 2006 through 2009, was focused on drilling on an 800 x 50-metre grid pattern in the southwestern part of Block 3. The mineralization trends were also followed along the northwestern border using sparser (800 to 1,600 x 100 to 200-metre) drilling patterns. It resulted in the identification of extensive uranium mineralization hosted by several units, and traced along approximately 25 kilometres from Block 2 in the southwest through to the northeastern border of Block 3.

The second phase of the drilling program, from 2010 to May 2011, was aimed at developing an 800 x 50-metre infill drilling grid pattern throughout the mineralized trend identified along the northwestern border, as well as the trend developed along the southern border. In addition, the 200 x 50-metre drilling grids patterns started to be developed in the southwestern part of Block 3 with the goal of identifying sites and designing test wellfields in the Lower Inkuduk and Lower Mynkuduk horizons.

The third phase of drilling started in June 2011 and continued until the end of 2013. Progressively tightening drilling grids (from 800 x 50-metre to 400 x 50-metre to 200 x 50-metre) were used to delineate mineralization in the southwestern, western and northern parts of Block 3.

In the fourth phase of drilling, during the second half of 2016, 69 infill delineation holes were drilled on a 100 x 50-metre grid on a selected site focusing on the Mynkuduk mineralization to confirm the continuity of the mineralization and its categorization. Thirty-nine drillholes were drilled at the test leach wellfields to study the recovery process.    

1.7 Block 3 appraisal program

Exploration work on Block 3 has identified extensive mineralization hosted by several horizons and traced along 25 kilometres. This discovery requires further assessment of its commercial viability. A Cameco subsidiary funded JV Inkai’s Block 3 exploration work. JV Inkai is operating a test mine at Block 3.

11 2017 INKAI OPERATION TECHNICAL REPORT

Approvals

Since 2009, JV Inkai has received a number of approvals extending the exploration period at Block 3. The latest one in November 2016, extended the exploration period until July 13, 2018.

In 2011, JV Inkai obtained government approval to carry out delineation drilling, uranium resource estimation, construction and operation of a TLF and completion of a pre-feasibility study.

In February 2017, JV Inkai submitted an updated estimate of in-situ uranium mineralization and a study, similar to a pre-feasibility study, to the Kazakh State Reserve Commission (SRC) for their approval.

Appraisal Work

Extensive exploration and delineation drilling was completed at Block 3 by JV Inkai from 2006 to 2016.

In 2011, JV Inkai began infrastructure development and completed engineering for a TLF for the Block 3 assessment program. In addition, a preliminary estimate of the mineralization on the southwestern corner of Block 3 was prepared, which was reviewed and approved by the SRC.

In 2012, JV Inkai started drilling the test wellfields and started construction of the TLF.

In 2014, an interim report on exploration results and estimate of the mineralization at Block 3 was reviewed and conditionally approved by the SRC.

In 2015, JV Inkai completed construction of the TLF and began pilot production from test wellfields. At December 31, 2016, total production from test mining at Block 3 was 865,000 pounds of U₃O₈.

In 2017, JV Inkai plans to continue with pilot production from the TLF.

1.8 Blocks 1 and 2 development

A pilot test, using the ISR mining method, was performed in the northeast area of Block 1 starting in December 1988. The pilot leach test in the north area of Block 2 was initiated in 2002.

In September 2005, JV Inkai decided to proceed with the main processing plant to be located at Block 1, and construction began soon after. In 2009, construction of the main processing plant was completed and the processing of solutions from Block 1 commenced. In February 2010, regulatory approval was received, allowing full processing of uranium concentrate on site.

Also in 2009, JV Inkai constructed and began commissioning a satellite plant to process solution recovered from Block 2. In 2011, JV Inkai received regulatory approval for processing at this satellite plant.

1.9 Mineral resources and mineral reserves

The estimated mineral resources and reserves at Inkai are located in Block 1 and Block 2. The preparation of the resource models followed the SRC guidelines. They were created by Volkovgeology Joint Stock Company (Volkovgeology), using the Grade-Thickness (GT) estimation method on 2-dimensional blocks in plan. Volkovgeology is a subsidiary of Kazatomprom and is responsible for prospecting, exploration and development of uranium deposits in Kazakhstan.

In 2003, Cameco performed a validation of the Kazakh reserve estimate for Block 1 and confirmed the estimated pounds of uranium to within 2.5% of the Kazakh reserve estimate. The same Kazakh reserve estimate was validated by an independent consulting firm in 2005. In 2007, Cameco and an independent consulting firm verified the Kazakh reserves estimate for Block 2 and obtained results in agreement with the Kazakh reserve estimate. In 2016, Cameco reviewed the criteria to align the Kazakh mineral resources and mineral reserves classification system with the Canadian Institute of Mining, Metallurgy and Petroleum (CIM) “Definition Standards - For Mineral Resources and Mineral Reserves” (Definition Standards). Where previously the Kazakh categories C2 and C1 were directly reconciled to Inferred and Indicated respectively, now C2 can be in the Inferred and Indicated categories and C1 in the Indicated and Measured categories.

The Block 1 mineral resources and reserves estimates are based on 991 surface drillholes. The Block 2

12 2017 INKAI OPERATION TECHNICAL REPORT

mineral resources and reserves estimates are based upon 1,441 drillholes. No mineral resources or reserves are reported for Block 3 until approved by the SRC and the Implementation Agreement closes.

Summaries of the estimated mineral resources and mineral reserves for Inkai with an effective date of December 31, 2016 are shown in Table 1-1 and Table 1-2. Cameco’s share of uranium in the mineral resources is based on its interest in potential production (57.5%), which differs from its ownership interest in JV Inkai (60%). Cameco’s share of uranium in the mineral reserves is based on its interest in planned production (57.5%) assuming an annual production rate of 5.2 million pounds of U₃O₈, which differs from its ownership interest in JV Inkai (60%).

TABLE 1-1: SUMMARY OF MINERAL RESOURCES – DECEMBER 31, 2016

Category	Area	Total tonnes (x 1,000)		Grade % U3O8		Total M Lbs  U3O8		Cameco’s share M Lbs  U3O8
MEASURED	Block 1		24,650		0.076		41.5		23.8
	Block 2		10,205		0.061		13.8		8.0
Total Measured			34,855		0.072		55.3		31.8
INDICATED	Block 1		15,561		0.069		23.7		13.6
	Block 2		62,354		0.045		62.3		35.9
Total Indicated			77,915		0.050		86.0		49.5
Total Measured and Indicated			112,770		0.057		141.3		81.3
INFERRED	Block 1		2,038		0.062		2.8		1.6
	Block 2		149,546		0.045		147.1		84.6
Total Inferred			151,583		0.045		149.9		86.2

Notes:	(1)    Reported mineral resources do not include amounts identified as mineral reserves. Totals may not add up due to rounding.
	(2)    Cameco’s share is 57.5% of total mineral resources.
	(3)    Inferred mineral resources are estimated on the basis of limited geological evidence and sampling, sufficient to imply but not verify geological grade and continuity. They have a lower level of confidence than that applied to an Indicated mineral resource and cannot be directly converted to a mineral reserve.
	(4)    Mineral resources have been estimated at a minimum grade-thickness cut-off per hole of 0.071 & 0.047 m%U3O8 for Blocks 1 and 2, respectively.
	(5)    The geological model used for Inkai involves geological interpretations on section and plan derived from surface drillhole information.
	(6)    Mineral resources have been estimated on the assumption of using the ISR extraction method.
	(7)    Mineral resources have been estimated with the grade-thickness method using 2-dimensional block models.
	(8)    There are no known environmental, permitting, legal, title, taxation, socio-economic, political, marketing or other relevant factors that could materially affect the above estimate of mineral resources other than changes resulting from closing of the Implementation Agreement.
	(9)    Mineral resources that are not mineral reserves have no demonstrated economic viability and do not meet all relevant modifying factors.

13 2017 INKAI OPERATION TECHNICAL REPORT

TABLE 1-2: SUMMARY OF MINERAL RESERVES – DECEMBER 31, 2016

Category	Area	Total tonnes (x 1,000)		Grade % U3O8		Total M Lbs  U3O8		Cameco’s share M Lbs  U3O8
PROVEN	Block 1 Block 2		11,170 22,023		0.076 0.061		18.8 29.8		10.8 17.1
	Total Proven		33,193		0.066		48.6		28.0
PROBABLE	Block 1 Block 2		2,425 28,292		0.069 0.045		3.7 28.3		2.1 16.3
	Total Probable		30,717		0.047		32.0		18.4
TOTAL RESERVES	Inkai		63,910		0.057		80.6		46.3

Notes:	(1)    Cameco reports mineral reserves and mineral resources separately. Totals may not add up due to rounding.
	(2)    Total pounds U3O8 are those contained in mineral reserves and are not adjusted for the estimated metallurgical recovery of 85%.
	(3)    Cameco’s share is 57.5% of total mineral reserves.
	(4)    Mineral reserves have been estimated at a grade-thickness cut-off of 0.13 m%U3O8.
	(5)    The geological model used for Inkai involves geological interpretations on section and plan derived from surface drillhole information.
	(6)    Mineral reserves have been estimated with no allowance for dilution, as this is not applicable for ISR mining.
	(7)    Mineral reserves have been estimated based on the use of the ISR extraction method. The production rate is planned for 5.4 million pounds of U3O8 for 2017, then 5.2 million pounds per year for 2018 to 2028 and then decreasing till 2030.
	(8)    Mineral reserves have been estimated with the grade-thickness method using two-dimensional block models.
	(9)    An average price of $51 (US) per pound of U3O8 was used to estimate the mineral reserves with exchange rates of $1.00 US=$1.20 to $1.25 Cdn and 245 Kazakhstan Tenge to $1.00 Cdn.
	(10)  There are no known mining, metallurgical, infrastructure, permitting or other relevant factors that could materially affect the above estimate of mineral reserves other than closing of the Implementation Agreement.

1.10 Mining

Mining at Inkai is based upon a conventional and well-established ISR process. ISR mining of uranium is defined by the International Atomic Energy Agency as:

“The extraction of ore from a host sandstone by chemical solutions and the recovery of uranium at the surface. ISR extraction is conducted by injecting a suitable leach solution into the ore zone below the water table; oxidizing, complexing and mobilizing the uranium; recovering the pregnant solutions through production wells; and finally, pumping the uranium bearing solution to the surface for further processing.”

ISR mining at Inkai is comprised of the following components to produce a uranium-bearing lixiviant (an aqueous solution which includes sulphuric acid), which goes to settling ponds and then to the processing

14 2017 INKAI OPERATION TECHNICAL REPORT

plants for production of uranium as yellowcake.

• Determination of the GT cut-off for the initial design and the operating period. The design cut-off sets a lower limit to the pounds per pattern required to warrant installation of a pattern before funds are committed, and the operating cut-off applies to individual producer wells and dictates the lower limit of operation once a well has entered production.

• Preparation of a production sequence which will deliver the uranium-bearing lixiviant to meet production requirements, considering the rate of wellfield uranium recovery, lixiviant uranium head grades, and wellfield flow rates.

• Wellfield development practices using an optimal pattern design to distribute barren lixiviant to the wellfield injectors, and to then collect lixiviant, which carries the dissolved uranium, back to the main processing plant or satellite plant, as the case may be.

The above factors are used to estimate the number of operating wellfields, wellfield patterns and header houses over the production life. They also determine the unit cost of each of the mining components required to achieve the production schedule, including drilling, wellfield installation and wellfield operation.

There is ongoing wellfield development in both Blocks 1 and 2 to support the current production plan.

1.11 Processing

As a result of extensive test work and operational experience, a very efficient process of uranium recovery has been established. The process consists of the following major steps:

• uranium in-situ leaching with a lixiviant

• uranium adsorption from solution with IX resin

• elution of uranium from resin with ammonium nitrate

• precipitation of uranium as yellowcake with hydrogen peroxide and ammonia

• yellowcake thickening, dewatering, and drying

• packaging of dry yellowcake product in containers

All plants load and elute uranium from resin while the resulting eluate is converted to yellowcake at the main processing plant. Inkai is designed to produce a dry uranium product that meets the quality specifications of uranium refining and conversion facilities.

1.12 Environmental assessment and licensing

In the Resource Use Contract, JV Inkai committed to conducting its operations according to good international mining practices. It complies with the environmental requirements of Kazakhstan legislation and regulations, and, as an industrial company, it must also reduce, control or eliminate various kinds of pollution and protect natural resources. JV Inkai is required to submit annual reports on pollution levels to the Republic of Kazakhstan environmental, tax and statistics authorities. Regulatory authorities have the power to issue an order reducing or halting production at a facility that violated environmental standards.

Environmental protection legislation in Kazakhstan has evolved rapidly, especially in recent years. As the subsoil use sector has evolved, there has been a trend towards greater regulation, heightened enforcement and greater liability for non-compliance. The most significant development was the adoption of the Ecological Code in 2007. This code replaced the three main laws related to environmental protection. Amendments were made to the code in 2011 that include more stringent environmental protection regulations, particularly relating to the control of greenhouse gas emissions, obtaining environmental permits, state monitoring requirements and other similar matters.

JV Inkai is required to comply with environmental requirements during all stages of operation, and develop an

15 2017 INKAI OPERATION TECHNICAL REPORT

environmental impact assessment for examination by a state environmental expert before making any legal, organizational or economic decisions that could have an effect on the environment and public health.

Under the Ecological Code, JV Inkai needs an environmental permit to operate. The permit certifies the holder’s right to discharge emissions into the environment, provided that it complies with the requirements of the permit and the Ecological Code. JV Inkai has a permit for environmental emissions and discharges for the operation that is valid until December 31, 2022. JV Inkai also holds the required permits under the Water Code which have various expiry dates.

As Inkai is a nuclear facility, JV Inkai is required to and currently holds the following additional material licences relating to its mining activities:

• “Licence for radioactive substances handling” valid till January 23, 2020

• “Licence for operation of mining production and mineral raw material processing” with indefinite term

• “Licence for transportation of radioactive substances within the territory of the Republic of Kazakhstan” valid till January 23, 2020

• “Licence for radioactive waste handling” valid till January 23, 2020.

In accordance with applicable legislation regulating permits and licences, JV Inkai is required to submit annual reports to relevant state authorities. As is typical with any mineral extraction site, construction, operation, and reclamation are subject to an ongoing process during which permits, licences, and approvals are requested, monitored and reported on, expire, and are amended or renewed.

JV Inkai received a mining licence for Block 1 and an exploration with subsequent mining licence for Blocks 2 and 3 from the government of Kazakhstan in April 1999. (See Section 4.2, Exploration and mining licences, for more information.)

The ISR mining method at Inkai uses acid in the mining solution to extract uranium from underground non-potable aquifers. The injection and recovery system is engineered to prevent the mining solution from migrating to the aquifer above the orebody, which has water with higher purity.

Kazakhstan does not require active restoration of post-mining groundwater. After a number of decommissioning steps are taken, natural attenuation of the residual acid in the mined out horizon, as a passive form of groundwater restoration, has been accepted. Attenuation is a combination of neutralization of the groundwater residual acid content by interaction with the host rock minerals and other chemical reactions which immobilize residual groundwater contaminants in the mined-out subsoil horizon. This approach is considered acceptable because it results in water quality similar to the pre-mining baseline status.

JV Inkai’s decommissioning obligations are largely defined by the Resource Use Contract. It has deposited the required contributions into a separate bank account as security to ensure it will meet its obligations. Contributions are capped at $500,000 (US). JV Inkai has funded the full amount.

Under the Resource Use Contract, JV Inkai must submit a plan for decommissioning the property to the government six months before mining activities are complete. It developed a preliminary decommissioning plan to estimate total decommissioning costs, and updates the plan every five years, or when there is a significant change at the operation that could affect decommissioning estimates. The plan was most recently revised in 2016. The preliminary decommissioning estimate is $10 million (US).

JV Inkai has environmental insurance, as required by the Ecological Code and the Resource Use Contract as well as the required civil liability insurance.

1.13 Production plan and mine life

The production plan presented in this technical report is based on Inkai mineral reserves from which the production of 68.5 million pounds of U₃O₈ is forecast. The projected remaining mine life is 13.3 years.

16 2017 INKAI OPERATION TECHNICAL REPORT

Inkai’s production plan over its mine life is presented on Figure 1-1.

FIGURE 1-1: ANNUAL PRODUCTION PLAN - 100% BASIS

Million Pounds U3O8 Produced 0.00 1.00 2.00 3.00 4.00 5.00 6.002017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 Year

1.14 Capital and operating cost estimates

Capital costs for Inkai are estimated to be $296.9 million over the remaining life of the current mineral reserves. The remaining capital costs, as of January 1, 2017, includes $217.3 million for wellfield development, $55.5 million for construction and $24.1 million for sustaining capital. The cost estimates are on a 100% basis with a currency exchange rate assumption of 245 Kazakhstan Tenge to $1.00 Cdn. All cost projections are stated in constant 2017 Canadian dollars and assume the throughput from the production schedule outlined on Figure 1-1.

Construction capital is heavily weighted to the first three years due to the major repairs and modernization planned for facilities at both Block 1 and Block 2. Pending closing of the Implementation Agreement, there are no other major construction projects anticipated.

Operating expenditures for ISR mining, surface processing, site administration and corporate overhead are estimated to be $12.71 per pound of U₃O₈ over the remaining life of the current mineral reserves. The operating costs have decreased from the March 31, 2010 technical report as a result of the optimization in the consumption of sulphuric acid and other reagents, as well as the devaluation of the Kazakhstan Tenge.

1.15 Regulatory risks

The identified regulatory risks are compliance with the requirements of the Resource Use Contract, Licences, permits, laws and regulations of Kazakhstan, uncertainty in and changes to Kazakhstan laws and regulations, the proposed new Subsoil Code not addressing the status of resource use contracts executed and licences issued prior to its enactment, political risk, Implementation Agreement regulatory approvals, and the extension of the Block 3 exploration period. Cameco believes that these risks are manageable. More information on these risks are included in Section 24.5 Regulatory Risks.

1.16 Conclusions and recommendations

Based on the rigorous procedures and experience demonstrated by Volkovgeology, JV Inkai and Cameco personnel, Cameco’s review of the reliability, quality and density of data available, the thorough geological interpretative work, and the different validation tests performed over the years, the QPs responsible for the mineral resource and mineral reserve estimates consider that the current estimates of mineral resources and reserves are relevant and reliable.

17 2017 INKAI OPERATION TECHNICAL REPORT

From 2009 till end of 2016, JV Inkai produced 36.7 million pounds of U₃O₈ (Cameco’s share 21.5 million) from Blocks 1 and 2. Cameco believes that Blocks 1 and 2 have the potential to sustain production levels, as outlined in this technical report. The current mine plan represents an operating mine life of 13.3 years, during which Inkai is forecast to produce an estimated 68.5 million pounds of U₃O₈.

Based on exploration and development to date, Cameco and the authors of this report are of the opinion that Block 3 has the potential to support a commercial operation.

Given that Inkai is in production, that it has sufficient mineral reserves to produce at the current licensed production rate, and that leach tests on Block 3 are in progress, the authors of this technical report consider that it is not necessary to recommend further exploration activities. In areas of probable mineral reserves where the confidence on some characteristics of the mineralization, such as grade continuity and hydrological conditions, can be increased, additional delineation drilling is recommended.

Over the life of the operation and at higher production rates, the accumulation of specific ionic species in the holding ponds could reduce surface equipment performance. It is recommended that the concentration of ionic species be monitored.

The Implementation Agreement provides for annual production at Inkai to be ramped up to 10.4 million pounds of U₃O₈ over three years following receipt of the required approvals. It is recommended that technical studies related to the production ramp-up be completed and submitted in a timely manner.

If the Implementation Agreement closes, the estimated mineral resources and mineral reserves of Inkai, and

Cameco’s share of them, will change materially.

18 2017 INKAI OPERATION TECHNICAL REPORT

2 Introduction

2.1 Introduction and purpose

Inkai is a material property for Cameco under Canadian securities laws.

This technical report has been prepared for Cameco by internal QPs in support of the disclosure of scientific and technical information relating to Inkai contained in Cameco’s annual Management’s Discussion and Analysis for the year ended December 31, 2016 filed with Canadian securities regulators on February 9, 2017, and Cameco’s Annual Information Form and Form 40-F for the year ended December 31, 2016.

The report has an effective date of December 31, 2016, and has been prepared in accordance with NI 43-101 by the following individuals:

• Darryl Clark, PhD, P. Geo., Managing Director, Cameco Kazakhstan LLP

• Alain G. Mainville, P. Geo., Director, Mineral Resources Management, Cameco Corporation

• Stuart B. Soliz, P. Geo., Principal Geologist, Power Resources, Inc. (operating as Cameco Resources)

• Robert J. Sumner, PhD, P. Eng., Principal Metallurgist, Technical Services, Cameco Corporation.

These individuals are the qualified persons responsible for the content of this technical report. All four have visited Inkai.

Alain G. Mainville has visited the Inkai site and JV Inkai’s head office on four occasions in the last three years, the latest being on November 20-22, 2016. The scope of his personal visits included meetings with JV Inkai, Kazatomprom and Volkovgeology personnel and field inspections of drilling, sampling, core logging, sample preparation and assaying, radiometric downhole surveys, geological modelling, mineral resources and mineral reserves estimation, production reconciliation and mine plans. Mr. Mainville has been involved with Inkai since 2002.

Darryl Clark is based in Astana, Kazakhstan. He routinely visits the Inkai site and JV Inkai’s office in Shymkent to meet with JV Inkai management and personnel to review aspects of the operation, including exploration, operations and mine development. Mr. Clark has been involved with Inkai since 2014, as General Director till the end of 2016.

Stuart B. Soliz has visited the Inkai site on eight occasions, the latest occurring March 1-8 2017. The scope of his last personal visit to the Inkai site included meetings with JV Inkai personnel to review the development status of technical documents related to the Implementation Agreement, including the Life of Mine plan. Mr. Soliz has been involved with Inkai since 2014.

Robert Sumner has visited the Inkai site on one occasion on February 3-6, 2016. The scope of the visit included meetings with JV Inkai personnel to review the surface processing facilities. Mr. Sumner has been involved with Inkai since 2015.

2.2 Report basis

This technical report has been prepared with available internal Cameco and JV Inkai data and information, as well as data and information prepared for Inkai. The principal technical documents and files relating to Inkai that were used in preparation of this technical report are listed in Section 27 References.

All monetary references in this technical report are expressed in Canadian dollars, unless otherwise indicated. Illustrations (Figures) in this technical report are from Cameco, Kazatomprom and JV Inkai, and are dated December 31, 2016, unless otherwise specified.

The technical and scientific information in this technical report does not reflect the material changes that

19 2017 INKAI OPERATION TECHNICAL REPORT

would result upon closing of the Implementation Agreement since it is still subject to obtaining all required government approvals. If the Implementation Agreement closes, the estimated mineral resources and mineral reserves of Inkai and Cameco’s share will change materially.

20 2017 INKAI OPERATION TECHNICAL REPORT

3 Reliance on other experts

The authors have relied, and believe they have a reasonable basis to rely, upon the following individuals who have contributed the legal and taxation information stated in this technical report, as noted in Table 3-1 below.

TABLE 3-1: RELIANCE ON OTHER EXPERTS

Name	Title	Section # (description)
Larry Korchinski, LLB	Director Legal Services and General Counsel, Cameco	1.2 (description of 2016 Implementation Agreement)
		1.3 (description of Property Tenure)
		4.2 (description of Exploration and Mining Licences)
		4.3 (description of Surface Tenure)
		4.4 (description of Resource Use Contract)
		4.5 (description of Subsoil Law)
		4.6 (description of Draft Subsoil Code)
		4.7 (description of Strategic Object)
		6.1 (description of Ownership)
		19.2 (description of Uranium Sales Contracts)
		19.3 (description of Material Contracts)
		24.2 (description of Cameco Funding of Block 3 Appraisal Program)
		24.3 (description of 2016 Implementation Agreement)
		24.4 (description of Currency Control Regulations)
		24.5 (description of Regulatory Risks)
Jill Johnson, MPAcc,	Manager, Tax Planning,	4.8 (description of Taxes and Royalties)
CPA, CA	Cameco

21 2017 INKAI OPERATION TECHNICAL REPORT

4 Property description and location

4.1 Location

The Inkai operation is located in the Suzak District of South Kazakhstan Oblast, Republic of Kazakhstan. The geographic coordinates are at approximately 45º 20’ north latitude and 67º 30’ east longitude (Figure 4-1).

JV Inkai received a licence for mineral resource use and a licence for geological exploration in the Republic of Kazakhstan. Licence Series AY 1370D, dated April 20, 1999, is for extraction of uranium in the area defined as Block 1 near the town of Taikonur. Licence Series AY 1371D, dated April 20, 1999, is for exploration and further mining in the areas designated as Blocks 2 and 3, also near the town of Taikonur.

The associated resource use contract (Resource Use Contract), covering both licences, was signed by the Republic of Kazakhstan and JV Inkai in July 2000.

FIGURE 4-1: LOCATION MAP

Inkai Location Map N INKAI Baikonaur 250 Km Shymkent Arctic Ocean Saskatoon Pacific Occan Indian Ocean Atlantic Occan

22 2017 INKAI OPERATION TECHNICAL REPORT

4.2 Exploration and mining licences

JV Inkai holds two licences issued on April 20, 1999: Licence AY 1370D and Licence AY 1371D (Licences).

Licence Series AY 1370D allows for the mining of uranium in a 16.58 square-kilometre area, designated as Block 1 in the Suzak District of the Republic of Kazakhstan. Mining is to be conducted in the Inkuduk and Mynkuduk horizons, which are at depths ranging from 300 to 520 metres from the surface. Licence AY 1370D includes Appendix 1 (mining allotment) and Appendix 2, which provides a list of geographical co-ordinates of 14 points defining the licence area. The term of the licence is 25 years from the licence issue date.

Licence Series AY 1371D allows for the exploration and further mining of uranium in a 470 square-kilometre area, designated as Block 2 (about 230 square kilometres) and Block 3 (about 240 square kilometres) in the Suzak District of the Republic of Kazakhstan. Licence Series AY 1371D includes Appendix 1 (exploration allotment) and Appendix 2, which provides a list of geographic coordinates- of 21 points. The term of the licence is 31 years from the licence issue date.

In 2008, JV Inkai received initial approval for mining for Block 2. In December 2008, JV Inkai was issued a new mining allotment. It consists of both the original mining allotment for Block 1 and the newly added area of the mining allotment for Block 2. This mining allotment contains two tables with geographic co-ordinates of the corner points. The Block 1 mining area is 16.58 square kilometres, and the depth of mining from 300 to 540 metres. The table for Block 1 contains the same 14 points as was in the original mining allotment. The table for Block 2 contains 20 points. The Block 2 mining area is 164.0 square kilometres, and the depth of mining is down to 520 metres.

The mining licence for Block 2 expires in April 2030. The mining licence for Block 1 expires in April 2024.

The Licences themselves do not grant subsoil use rights in Kazakhstan, rather, the right arises on the basis of both the Licences and the Resource Use Contract. Please refer to Section 4.4 Resource Use Contract for the discussion of the Resource Use Contract.

The exploration period for Block 3 has been extended to July 13, 2018 by amendments to the Resource Use Contract. See Section 4.4 Resource Use Contract for more information.

4.3 Surface tenure

Under Kazakhstan law, subsoil and mineral resources belong to the Republic of Kazakhstan. Currently, the Republic of Kazakhstan provides access to subsoil and mineral resources under a resource use contract. Minerals extracted from subsoil by a subsoil user under a resource use contract are the property of the subsoil user unless the Subsoil Law or a resource use contract provides otherwise.

Under the Resource Use Contract and the Licences, JV Inkai has the rights to explore for and to extract uranium from the subsoil and JV Inkai owns uranium extracted from the subsoil.

A subsoil use contract gives the contractor a right to use the surface of the property while exploring, mining and reclaiming the land. However, this right must be set forth in a surface lease agreement with the applicable local administrative authorities.

On a regular basis, JV Inkai obtains from local authorities the necessary surface lease agreements for new buildings and infrastructure. JV Inkai does not hold surface leases for the entire area that is subject to the Licences. It obtains them gradually only for surface area required for exploration, mining or construction of new infrastructure.

For more information on subsoil use rights, terms, and termination of the Licences and the Resource Use Contract, please refer to Sections 4.2, 4.4, and 4.5.

23 2017 INKAI OPERATION TECHNICAL REPORT

4.4 Resource Use Contract

The Resource Use Contract was signed by the Republic of Kazakhstan and JV Inkai in July 2000. Under the Subsoil Law, JV Inkai holds its rights to Blocks 1, 2 and 3, on the basis of the Licences it received for those blocks and the Resource Use Contract. JV Inkai also has obligations under the Licences and the Resource Use Contract with which it must comply in order to maintain its rights to Blocks 1, 2 and 3.

In 2007, Amendment No. 1 to the Resource Use Contract was signed to extend the exploration period at Blocks 2 and 3.

In 2009, Amendment No. 2 to the Resource Use Contract was signed to:

• extend the exploration period for Block 3 until July 13, 2010

• provide final approval for mining at Block 2

• combine Blocks 1 and 2 for mining and reporting purposes

• adopt the new Tax Code of the Republic of Kazakhstan (Tax Code) that took effect January 1, 2009

• reflect current Kazakhstan legal and policy requirements for subsoil users, like JV Inkai, to procure goods, works and services under certain prescribed procedures and foster greater local content. As a result, at least 40% of the cost of equipment and materials purchased must be for equipment and materials of Kazakhstan origin and 90% of the contract work must be of Kazakhstan origin

• require a certain level of Kazakhstan employment by JV Inkai: 100% of workers; at least 70% of technical and engineering staff; and at least 60% of the management staff. All of these percentages are measured over the life of the Resource Use Contract.

In 2011, Amendment No. 3 to the Resource Use Contract was signed to:

• increase annual production from Blocks 1 and 2 to 3.9 million pounds of U₃O₈

• carry out a five-year assessment program (to July 2015) at Block 3 that includes delineation drilling, uranium resource estimation, construction and operation of a TLF and completion of a feasibility study.

In 2013, Amendment No. 4 to the Resource Use Contract was signed to increase annual production from Blocks 1 and 2 to 5.2 million pounds of U₃O₈.

In November 2016, Amendment No.5 to the Resource Use Contract was signed, extending the exploration period at Block 3 to July 13, 2018.

The Implementation Agreement contemplates certain amendments to the Resource Use Contract. For more information, see Section 24.3 2016 Implementation Agreement

In addition to complying with its obligations under the Licences and the Resource Use Contract, JV Inkai, like all subsoil users, is required to abide by the work program appended to its Resource Use Contract, which relates to its mining operations. See Section 4.5.5 Work programs and project documentation for more information.

4.5 Subsoil Law

The principal legislation governing subsoil exploration and mining activity in Kazakhstan is the Law on the Subsoil and Subsoil Use, dated June 24, 2010, as amended (Subsoil Law) which superseded the previous law on subsoil and subsoil use dated January 27, 1996, as amended (Old Subsoil Law). In general, the Licences held by JV Inkai are governed by the version of the Old Subsoil Law in effect at the time of their issuance in April, 1999 and the current Subsoil Law applies only if it does not worsen JV Inkai’s position.

24 2017 INKAI OPERATION TECHNICAL REPORT

The Subsoil Law defines the framework and the procedures connected with the granting of subsoil rights and the regulation of the activities of subsoil users. The subsoil, including mineral resources in their underground state, are Kazakhstan state property, while resources brought to the surface belong to the subsoil user, unless otherwise provided by contract or laws of the Republic of Kazakhstan.

In order to develop mineral resources, the appropriate state agency (Competent Authority), grants exploration and production rights to third parties. Subsoil rights are granted for a specific period, but may be extended prior to the expiration of the applicable contract or licence. Currently, the Ministry of Energy of the Republic of Kazakhstan is the Competent Authority

Subsoil rights become effective upon execution of a contract with the Competent Authority. Pursuant to the Subsoil Law, a subsoil user is accorded, inter alia, the exclusive right to conduct mining operations, to erect production facilities, to freely dispose of its share of production and to conduct negotiations for extension of the contract, subject to restrictions and requirements set out in the Subsoil Law.

Until amendments to the Old Subsoil Law in August 1999, both a licence and a contract were required for exploration and production. Combined licences (both exploration and production) were granted for a period that included exploration and production licence periods (up to six and 25 years respectively), including any permitted extensions. Both exploration and production licences were required to contain, among other things, information concerning the licensee, the boundaries of the contract area, the term of the licence and the date of commencement of work, the type of contract (exploration or production), the minimum work program, environmental and safety obligations and conditions for extending the licence term.

In August 1999, the Kazakhstan government abolished the licence regime for subsoil use rights granted after September 1999. Thus, from September 1999 onward, subsoil use rights have been granted on the basis of a resource use contract alone. However, all licences previously issued remain valid. An entity which obtained its subsoil use right prior to August 1999 holds such rights on the basis of a subsoil use licence and a resource use contract. An entity which obtained a subsoil use right after August 1999 holds its rights on the basis of a resource use contract alone.

The subsoil use rights held by JV Inkai came into effect upon the issuance of its Licences (April 1999), the execution of its Resource Use Contract (July 2000), and approval of the Resource Use Contract by applicable state entities.

In accordance with the August 1999 amendments to the Old Subsoil Law and the current Subsoil Law, Cameco believes the Licences held by JV Inkai are governed by the version of the Old Subsoil Law in effect at the time of their issuance in April, 1999.

To date, the Subsoil Law has not had a significant impact upon JV Inkai; however, Cameco continues to assess the impact. Some of the general impact is described below in the remaining parts of this Section 4.5 Subsoil Law

4.5.1 Stabilization clause

The general stabilization provision has been changed in the Subsoil Law. Under the Old Subsoil Law, changes in legislation that worsened the position of the subsoil user did not apply to resource use contracts signed or licences granted before the changes were adopted.

While the Subsoil Law still contains the above guarantees, it expands the list of exceptions such as national defence or security, ecological safety, public health, taxation, and customs. The Republic of Kazakhstan has gradually weakened the stabilization guarantee, particularly in relation to the new projects, and the national security exception is applied broadly to encompass security over strategic national resources.

Amendment No. 2 to the Resource Use Contract eliminated the tax stabilization provision that applied to JV Inkai.

4.5.2 Transfer of subsoil use rights and pre-emptive rights

Amendments to the Old Subsoil Law of December 2004 and October 2005, provide the Republic of

25 2017 INKAI OPERATION TECHNICAL REPORT

Kazakhstan with a pre-emptive right to acquire subsurface use rights and equity interests in entities holding subsoil use rights and in any entity which may directly or indirectly determine or exert influence on decisions made by a subsoil user, if the main activity of such entity is related to subsoil use in Kazakhstan, when such entity wishes to transfer such rights or interests. This pre-emptive right is also provided by the Subsoil Law and it permits the Republic of Kazakhstan to purchase any subsoil use rights or equity interests being offered for transfer on terms no less favourable than those offered by other purchasers. The pre-emptive right has been recently limited to the deposits of strategic importance; however, Inkai is a deposit of strategic importance and therefore still subject to the pre-emptive right of the state.

The Competent Authority has the right to terminate a subsoil contract if a transaction takes place in breach of this law. According to the Subsoil Law requirements, these provisions apply both to Kazakhstan and overseas entities, including publicly traded companies.

The Subsoil Law provides that assignments and transfers of subsoil use rights may be made only with the prior consent of the Competent Authority. During its tenure as the Competent Authority, the Ministry of Energy of the Republic of Kazakhstan customarily interpreted this requirement widely to include any alienation of rights, including, for example, in bankruptcy or by merger or amalgamation. Transactions entered into and implemented without such consent as well as those implemented six months after the consent is granted are invalid.

The Subsoil Law also provides that once the approved transaction is completed, the Competent Authority must be informed within five business days. Failure to notify the Competent Authority in time is grounds for invalidation of the transaction.    

See Section 4.7 Strategic object for information on additional requirements to dispose of an interest in JV Inkai.

4.5.3 Dispute resolution

The dispute resolution procedure in the Subsoil Law does not specifically disallow international arbitration. Instead it states that if a dispute related to a resource use contract cannot be resolved by negotiation, the parties can resolve the dispute according to the laws of Kazakhstan and international treaties ratified by the Republic of Kazakhstan.

The Resource Use Contract allows for international arbitration. Cameco believes the Subsoil Law does not affect this right.

4.5.4 Contract termination

Under the Subsoil Law, the Competent Authority can unilaterally terminate a contract before it expires if:

• a subsoil user does not fix more than two breaches of its obligations provided by the resource use contract specified in a notice by the Competent Authority within a specific period (non-compliance with project documents are excluded from the grounds for termination)

• subsoil rights or an object connected with the subsoil use rights (direct and indirect ownership interests in a subsoil user) are transferred without consent of the Competent Authority if such consent was required

• less than 30% of the financial obligations under a contract are fulfilled during two consecutive years

• activities of a subsoil user exploring or developing a strategic deposit entails such changes in the economic interests of the state that it poses a threat to national security and the subsoil user does not satisfy the Competent Authority’s request to amend the resource use contract in this regard.

Under the Resource Use Contract, if JV Inkai breaches its obligations, the Competent Authority has to notify JV Inkai of the breach and provide a reasonable period for JV Inkai to fix the breach before it can terminate the contract. Cameco believes that the terms of the Resource Use Contract should continue to apply unless

26 2017 INKAI OPERATION TECHNICAL REPORT

the state seeks to apply the national security or environmental protection exception to the guarantee of legal stability.

4.5.5 Work programs and project documentation

In addition to following its obligations under its Licences and the Resource Use Contract, JV Inkai, like all subsoil users, is required to abide by the work program, which is a mandatory part of the Resource Use Contract, and which relates to its operations over the life of the mine.

Work programs must be developed in accordance with project documents. The Subsoil Law establishes three types of project documents, depending on the type and stage of the work:

• exploration project: none for JV Inkai

• appraisal project: Block 3

• mining project documents: Block 1 and Block 2.

The project documents are developed and undergo a review and approval process. All work must be in compliance with the project documents, and conducting any work without an approved project document, or in non-compliance with it, is not permitted. Since January 2015, subsoil users are allowed to produce within 20% (above or below) their licensed capacity in a year without triggering a requirement to redo the project document for the work program. Any other changes in the work program require application to the Competent Authority.

Subsoil users who received subsoil rights before the Subsoil Law was introduced were required to:

• develop new project documentation to be approved by July 7, 2011

• develop a new work program in accordance with the project documentation to be approved by January 7, 2012.    

JV Inkai submitted the required documentation and received approval of the new work program as part of the April 2011 approval of Amendment No. 3 to the Resource Use Contract. An updated work program, to increase the annual production rate to 5.2 million pounds of U₃O₈ (100% basis), was submitted to the Competent Authority in 2012 and was approved in December 2013 in connection with Amendment No. 4 to the Resource Use Contract. An updated work program for the Block 3 appraisal project was submitted and approved in connection with the November 2016 Amendment No. 5 to the Resource Use Contract.

The Subsoil Law repealed the previous requirement for annual work plans. Instead, expected exploration and production for each year are now set out in one work program.    

4.5.6 Procurement requirements

Under Subsoil law, all subsoil users, including JV Inkai, must procure goods, works and services for subsoil use operations under prescribed statutory procedures.

Kazakhstan law unifies the procurement process and now requires procurements from open tender, single source, price request and digital procurement to be conducted with mandatory use of the register of goods, works and services (the register of potential suppliers) or other digital procurement systems which is synchronized with this register. Subsoil users are also required to develop annual, mid-term and long-term procurement programs based on the work program and respective budget.    

JV Inkai currently procures goods, works and services according to Kazakhstan law and the Resource Use Contract, following the annual approval of its procurement plan.

4.5.7 Local content requirements

Since 2002, Kazakhstan has implemented a policy aimed at replacing imports, and fostering greater involvement, support and stimulation of local producers and local employees. Under this policy, subsoil users are obliged to purchase local works and services and hire local personnel in such percentages as may be specified in their resource use contracts.

27 2017 INKAI OPERATION TECHNICAL REPORT

In 2012 Kazakhstan amended the Subsoil Law to retroactively mandate all subsoil users to use unified terminology and to report on local content pursuant to a newly introduced unified methodology. However, since accession to the World Trade Organization, Kazakhstan amended its local content requirements, abolishing the local content requirements for goods. If this requirement remains in resource use contracts entered into prior to January 1, 2015, it must be removed if the term of the contract is amended; otherwise it would have been automatically abolished on January 1, 2012. Nonetheless, the Subsoil Law still imposes local content requirements for works, services and employees.    

The Resource Use Contract imposes local content requirements on JV Inkai with respect to employees, goods, works and services. As a result, at least 40% of the costs of goods and equipment must be for equipment and materials purchased of local origin, 90% of the contract work (i.e. works and services) must be of local origin, and 100%, 70% and 60% of employees depending on qualifications (workers, engineers and management, respectively) must be of local origin. The Resource Use Contract has not been amended to remove the local content requirements for goods yet and it will continue to apply to goods procured by JV Inkai until either it is amended or January 1, 2021, whichever comes first.

4.5.8 Strategic deposits

On August 13, 2009, a governmental resolution “On Determination of the List of Subsoil (Deposit) Areas having Strategic Importance” No. 1213 came into force whereby 231 blocks, including all three of JV Inkai’s Blocks, were prescribed as strategic deposits. The Kazakhstan government re-approved this list in 2011 and JV Inkai’s Blocks remain on it.

Under the Subsoil Law, if a subsoil user’s actions in the performance of subsoil use operations with respect to strategic deposits result in a change to the economic interests of the Republic of Kazakhstan which create a threat to national security, the Competent Authority is entitled to require an amendment to the resource use contract for the purpose of restoring the economic interests of the Republic of Kazakhstan. The Subsoil Law prescribes strict deadlines for the parties to negotiate and execute any such required amendments.

The Subsoil Law also allows the Competent Authority, with the consent of the Republic of Kazakhstan, to unilaterally refuse to perform its obligations under a contract if it determines that the subsoil use operations conducted thereunder will result in a change in the economic interests of Kazakhstan, which create a threat to national security. In such circumstances, the Competent Authority must provide not less than two months prior notice of such refusal. Under this provision, the Competent Authority also has the right to unilaterally terminate a contract without having to comply with the civil law provisions requiring a party to apply to a court or arbitration panel for termination.

The basis for exercise by the Competent Authority of any of these powers is a “change in the economic interests of the Republic of Kazakhstan which creates a threat to national security”, which might be interpreted broadly.

4.6 Draft Subsoil Code

At present, the subsoil use sector in Kazakhstan is regulated by the Subsoil Law (as defined in Section 4.5 Subsoil Law above) and related regulations. Currently, the Republic of Kazakhstanis developing a draft comprehensive code – the Subsoil and Subsoil Use Code (Subsoil Code or Code). It is to supersede the current Subsoil Law and related regulations for the purpose of consolidation of the legislation in this area.

The Kazakhstan government initially planned to finalize and introduce a draft Subsoil Code to the Parliament in November 2016. However, as at the date of this technical report the Subsoil Code is still at the stage of development. It is expected to be enacted in the second half of 2017.

The overview below is therefore based upon the most recent available draft of the Subsoil Code dated December 22, 2016. It is possible that at the time of its adoption the Subsoil Code could be significantly different than the current draft version.

28 2017 INKAI OPERATION TECHNICAL REPORT

4.6.1 Re-introduction of the licencing regime

The draft Subsoil Code reintroduces the licencing regime, which was in effect until 1999. If adopted in its current form, the Subsoil Code would provide that a subsoil use right with respect to solid minerals and geological exploration of the subsoil would be granted on the basis of a licence only. The regime of the resource use contracts would only apply to exploration and production rights of hydrocarbons. Thus, the rights to explore for and produce uranium will continue to be provided on the basis of a licence.

A competent authority and a subsoil user would still be able to enter into a contract for extraction of solid minerals provided that the subsoil user’s investment commitments is not less than a minimum amount stipulated under the Code. However, such a contract would no longer serve as the basis for the creation and termination of the subsoil use right which would only be granted under a licence. Instead, a contract would function as an agreement setting out in more detail the parties’ terms of cooperation and the terms of extraction of minerals. The execution of such a contract may not serve as basis for granting a licence.    

The previous edition of the draft Subsoil Code dated May 2016 provided that any licences issued and contracts executed before the enactment of the Subsoil Code would remain valid. However, the December 2016 draft of the Subsoil Code no longer contains these transitional provisions. Therefore, status of the validity of the Resource Use Contract and JV Inkai’s Licences under the Subsoil Code is unclear. It remains to be seen if the final version of the Code provides clarity.

4.6.2 Stabilization clause

The Subsoil Code provides new tests for the application of stabilization which are (i) establishment or aggravation of liability, or (ii) imposition of new obligations, and (ii) new obligations which define another terms of the subsoil use operation that are detrimental to the results of such operations. It seems that the new stabilization clause aims to clarify the stability and at the same time to provide the subsoil user with the ability to use the new right granted by the laws adopted after the date of the respective contracts/licences.

4.6.3 Dispute resolution

The Subsoil Code grants the subsoil user recourse to arbitration subject to the following conditions: (i) the subsoil user incurred expenses equivalent to an amount stipulated under the Code over the course of its subsoil operations; (ii) the dispute is compensation of the subsoil user’s losses caused by revocation of licence or a violation by the subsoil user of the Subsoil Code that may lead to early revocation of licence. In case of the subsoil user’s referral of the dispute to arbitration (subject to the conditions described above) the consent of the state is deemed to have been granted.

The Subsoil Code is silent on the status of arbitration clauses contained in resource use contracts currently in effect. The December 2016 draft of the Code no longer contains transitional provisions providing that the contracts executed before its enactment would remain valid. It may be that the dispute settlement provisions of the draft Subsoil Code will be further refined.

4.6.4 Transfer of subsoil use rights and pre-emptive rights

The Subsoil Code maintains the state’s control over transactions involving subsoil use rights and direct and indirect ownership interests in a subsoil user. Like the current law, the Subsoil Code establishes that transfers of subsoil use rights, transfers of shares/interests in subsoil users and grant of security over a subsoil use right require consent of the competent authority. At the same time, unlike the current law, the Subsoil Code provides a completely new approach, the proposed test for the application of the consent is a transfer of subsoil user right (its share) or a change in direct and indirect controlling persons. Where the direct control means (i) holding 25% of shares (interest, convertible securities (convertible into shares)), or (ii) having 25% of votes in the highest management body, or (iii) having the right to determine decision under the law or contract, or (iv) receiving 25% of distributed net profit); and indirect control means control of the company having direct control over another company. Accordingly, transfers between shareholders having less than 25% of shares (vote or net profit) would not be subject to the consent.

Moreover, the Subsoil Code provides more exemptions from the requirement to obtain consent and excludes

29 2017 INKAI OPERATION TECHNICAL REPORT

inter alia transfer of subsoil user rights or shares in controlling persons within the same person (i.e. no change in shareholders but only change in the shareholding), intragroup transfers, change of type of legal entity (transformation) and reduction of shareholders of the controlling entity (buy out).

Similarly to the current law, the Subsoil Code establishes the state’s priority right to purchase any subsoil use right and interest in the respective subsoil user and interest in persons controlling such subsoil user under the contract on use where the site is of strategic importance. The above mentioned test on control and exemptions from the consent requirements are also applicable to the state priority right.

Unlike the current law, the Subsoil Code provides which deposit may be recognized as having strategic importance and refers only to hydrocarbons but does not list uranium. Therefore, it is unclear whether uranium fields would or would not be recognized as fields of strategic importance.

4.7 Strategic object

Kazakhstan law (Civil Code and the Law on State Property) defines the term “strategic object” and provides that imposition of encumbrances and their alienation is subject to the approval of the Kazakhstan government. In addition, the Law on State Property provides that the Republic of Kazakhstan shall have the priority right to purchase the strategic object being disposed of.

The Civil Code provides a general description of objects which might be recognized as strategic objects while Decree No. 651 of the Republic of Kazakhstan dated June 30, 2008 approves a specific list of objects qualified as strategic (the “List of Strategic Objects”). While a 40% interest in JV Inkai held by the Kazatomprom was on the List of Strategic Objects since 2008, Cameco’s 60% interest in JV Inkai was included on the List of Strategic Objects only in August 2012.

Accordingly, any encumbrances and disposal of an interest in JV Inkai requires a decree of the Republic of Kazakhstan and waiver of priority right by the Republic of Kazakhstan.

4.8 Taxes and royalties

The Resource Use Contract lists the taxes, duties, fees, royalties and other governmental charges that are payable by JV Inkai, including income tax, value added tax, excise tax, excess profits tax, social tax, land tax, transportation tax, royalties on uranium extracted, commercial discovery bonus and custom duties, subject to changes due to the elimination of the tax stabilization provision in October 2009 noted below.

However, on January 1, 2009, a new Tax Code took effect. Pursuant to the Tax Code, a number of changes have been introduced to the taxation regime of subsoil users.

The most significant changes to the tax regime previously applicable to the Resource Use Contract introduced by the Tax Code are as follows:

• The abolition of the stabilization of tax regimes provided by resource use contracts. Prior to Amendment No. 2 being signed, the Resource Use Contract contained a tax stabilization provision. In October 2009, JV Inkai signed this amendment to the Resource Use Contract to adopt the Tax Code, which included elimination of this tax stabilization provision.

• The rate of corporate income tax on aggregate income has been 20% since January 1, 2009. In 2007, JV Inkai became subject to payment of the income tax. Under the Resource Use Contract, corporate income tax rate was 30%.

• The Tax Code has replaced the previous royalty regime with a new tax – the Tax on Production of Useful Minerals, a mineral extraction tax previously defined as MET. MET must be paid on minerals and certain other substances extracted. The rate in the Tax Code used to calculate MET on uranium (production solution) is currently 18.5%. Under the prior law, JV Inkai would pay royalties, calculated on a graduated scale, based on the sale price of production in each year.

30 2017 INKAI OPERATION TECHNICAL REPORT

• Under the Resource Use Contract, a one-time commercial discovery bonus is payable when confirmation is received of Kazakh-defined recoverable reserves located in a particular licensed area. Under the Tax Code, the rate for future commercial discoveries is increased to 0.1% of the value of Kazakh-defined recoverable reserves. Previously, the bonus was calculated as 0.05% of the value of Kazakh-defined recoverable reserves.

• The Tax Code changes the calculation of excess profits tax from that contained in the Resource Use Contract. However, JV Inkai is currently of the view that it will not be liable to pay any excess profits tax for the foreseeable future.

4.9 Known environmental liabilities

For a discussion of known environmental liabilities, see Section 20.1.5 Known environmental liabilities.

4.10 Permitting

For a discussion on permitting, see Section 20.1.2 Permitting.

4.11 Factors affecting access to the property

Known factors and risks that may affect access, title and right to work on the property are described below.

Under the Resource Use Contract and Licenses, JV Inkai has the rights to explore for and to extract uranium from the subsoil and it owns the uranium extracted from the subsoil. Its ability to conduct these activities, however, depends upon compliance with its obligations under the Resource Use Contract, the Licenses and laws of Kazakhstan, as well as ongoing support, agreement and co-operation from the government of Kazakhstan.    

Under Kazakhstan law, the state has the right to nationalize private property by enacting a law on nationalization. As of the date of this technical report, Kazakhstan has not exercised such right but the risk of nationalization of JV Inkai’s property still exists.

The Subsoil Law lists the violations which entitle the Competent Authority to unilateral termination of a resource use contract (for more details please refer to Section 4.5.4 Contract termination). If JV Inkai or its participants commit any of these violations, there is a risk of JV Inkai losing its subsoil use rights due to unilateral termination by the Competent Authority.

The Subsoil Law provides the state with the right to demand the amendments of the resource use contract if activities of a subsoil user, exploring or developing a strategic deposit, entail such changes in the economic interests of the Republic of Kazakhstan that pose a threat to national security. This in turn might entail a risk of diminishment of JV Inkai’s rights. The right to demand amendments might be applied broadly by the Republic of Kazakhstan leading to a risk of (i) curtailment of JV Inkai’s rights or (ii) termination of the Resource Use Contract and the Licences. For more details please refer to Section 4.5.4 Contract termination.

JV Inkai is required to hold, and it does hold, a number of licences and permits (including but not limited to ecological permits) and therefore, must comply with their requirements. Failure to obtain and to comply with the requirements of licences and permits could result in the activities JV Inkai performs under a licence or permit being limited. For example, without an ecological permit, JV Inkai will be unable to conduct subsoil operations.

Generally, other breaches of law and/or contractual obligations (such as failure to pay taxes, breach of regular contract, or causing damages to a third party) may also lead to limitation of the right to use JV Inkai’s property.    

Please see Section 24.5.1 Kazakhstan laws and regulations for a discussion of other risks that may affect access, title and right to work on the property.

31 2017 INKAI OPERATION TECHNICAL REPORT

5 Accessibility, climate, local resources, infrastructure and physiography

5.1 Access

The Inkai operation is located near the town of Taikonur, approximately 350 kilometres northwest of the city of Shymkent and approximately 155 kilometres east of the city of Kyzl-Orda in the south-central region of Kazakhstan. Taikonur can be reached from Astana or Almaty by flying to one of the regional cities of Shymkent or Kyzl-Orda, then driving on paved roads (Figure 5-1). The road to Taikonur is currently the primary access road for transportation of people, supplies and uranium product for JV Inkai.

Major airline service is available to Astana and Almaty from Europe, Russia, China and other countries in the region. From Astana or Almaty, commercial airline services are available to Shymkent and Kyzl-Orda. The flight from Almaty to Kyzl-Orda is a two-hour trip. The four-hour drive from Kyzl-Orda is on paved roads for 130 kilometres to the town of Shieli and then for 160 kilometres to Taikonur. The total trip time through Shymkent from Almaty is about eight hours for 470 kilometres on a paved road.

Rail transportation is available from Almaty to Shymkent then northwest to Shieli, Kyzl-Orda and beyond. A rail line also runs from the town of Dzhambul to Kazatomprom’s Centralia facility to the south of Taikonur.

5.2 Climate

Inkai lies in the Betpak Dala Desert. The ground consists of extensive sand deposits, with vegetation limited to grasses and occasional low bushes. Major hydrographic systems in the area include the Shu, Sarysu and Boktykaryn rivers. These rivers typically exhibit surface water flow in May and June and revert to isolated reaches with salty water during the rest of the year.

The climate in south central Kazakhstan is semi-arid, with temperatures ranging from -35°C in the winter to +40°C in the summer. January is the coldest month, with an average temperature of -9°C. July is the warmest month, when temperatures climb to an average of +28°C. The climate of the region is continental, characterized by harsh winters and hot summers, low humidity and low precipitation. The daily fluctuation in air temperature during the summer can be up to 14°C.

The average precipitation varies from 130 to 140 millimetres per year, with snow accounting for 22 to 40% of this amount. The average air humidity is typically in the range of 56 to 59%.

The region is also characterized by strong winds. The prevailing direction of the wind is northeast, averaging 3.8 to 4.6 metres per second. Dust storms are common.

Site operations are carried out throughout the year, despite the cold winter and hot summer conditions.

5.3 Physiography

The surface elevation at Inkai ranges from 140 to 300 metres above mean sea level. The Inkai deposit is subdivided into two morphologically diverse regions:

• the sandy-brackish intercontinental deltas of Shu and Sarysu rivers

• the Betpak Dala Plateau

The sandy-brackish intercontinental deltas of the Shu and Sarysu rivers are located in the hollow between the elevation of the Betpak Dala plateau and the Karatau Mountain range. This plain has numerous brackish and lacustrine basins, dry river-beds, former river-beds, and aeolian relief of various configurations. The Betpak Dala is a slightly sloping and slanted north to south plain with deflationary basins and rare arched ridges.

5.4 Local resources

Currently, Taikonur has a population of about 680 people who are mainly employed in uranium development and exploration. Whenever possible, JV Inkai hires personnel from Taikonur and surrounding villages. The

32 2017 INKAI OPERATION TECHNICAL REPORT

town has a school, medical clinic and small store. Most of the food is purchased in Shymkent or Shieli.

5.5 Infrastructure

Inkai is a developed producing property with sufficient surface rights to meet future mining operation needs for the current mineral reserves as well as site facilities and infrastructure. The electrical supply for Inkai is from the national power grid. Inkai is connected to the grid via a 35-kilovolt power line, which is a branch of the circuit that supplies the Stepnoye mine east of Inkai. In case of power outage, there are standby generators. Telephone communications utilize a satellite internet system.

Inkai has access to sufficient water from groundwater wells for all planned industrial activities. Potable water for use at the camp and at the site facilities is supplied from shallow wells on site. The water systems include well houses, pump stations, storage for reserve demands and fire protection and distribution to points of use and fire protection mains. Sewage disposal is in a standard septic tank and leach field system.

33 2017 INKAI OPERATION TECHNICAL REPORT

FIGURE 5-1: GENERAL LOCATION MAP

43km Ortalyk Stepnoy Ru 60km Inkal Taikonour Taikonur uvanas Kyzemchek 95km Kyzyl-Orda LEGEND -100 km South KZ oblast boundary River Mountain Sand Salt lake Airport Main city Small city/village Uranium mine Motorway road Paved road Gravel road Unregistered track Road under construction Road with restricted access Mountain pass Railway Distance South inkal Shu 64km 68km Zhuantobe Tasti 29km 40km 32km 54km 70km Torkuduk MoYnkumsands 62km Karatau 39km 33km inkol Shiel 62km Karakur 31km Karamanum N Sozak 41km Karamurun 33km Zhanakorgan I0km Cholakorgan Togusken Kharassan Taukent 35Km Kumkent 113km BarkenU 50Km 113km Kentau 38km 95km Akkol 112km l 90km 50km 79km 80km Turkistan Low 102km Sheyan 37km 45km 105km Taraz Boralday 20km 175km Zareshnoya Aris Aksu CIT AIRPORT SHYMKENT

(Source: Cameco, 2016)

34 2017 INKAI OPERATION TECHNICAL REPORT

6 History

6.1 Ownership

There have been several changes in ownership of participating interests in the limited liability partnership, JV Inkai, established under the laws of Kazakhstan that govern Inkai. The current owners and their participating interests are as follows:

• Cameco (60%)

• Kazatomprom (40%)

In 1996, JV Inkai is first registered by the Kazakhstan Ministry of Justice. The participating interests were Cameco, Uranerzbergbau-GmbH, and National Joint Stock Company Atomic Power Engineering and Industry “KATEP” (KATEP), all with 33 1/3%.

In 1997, Kazatomprom is established. The Republic of Kazakhstan owns Joint Stock Company Sovereign Wealth Fund “Samruk-Kazyna”, who is the sole shareholder of Kazatomprom.

In 1998, KATEP’s participating interest in JV Inkai is transferred to Kazatomprom. Cameco acquires all of the participatory interest of Uranerzbergbau-GmbH, becoming owner of a 66 2/3% participatory interest in JV Inkai. Cameco agrees to transfer a 6 2/3% participatory interest in JV Inkai to Kazatomprom, leaving Cameco with a 60% participating interest.

In August 2011, Cameco and Kazatomprom entered into a memorandum of agreement (2011 MOA) to increase annual uranium production at Inkai from Blocks 1 and 2 to 5.2 million pounds of U₃O₈ (100% basis). Under the 2011 MOA, Cameco’s share of Inkai’s annual production is 2.9 million pounds of U₃O₈ and is also entitled to receive profits on 3.0 million pounds of U₃O₈, defining the basis of its 57.5% share of mineral resources and mineral reserves (assuming annual production at 5.2 million pounds of U₃O₈).

See Section 24.3 2016 Implementation Agreement for information on the Implementation Agreement, which contemplates, once it closes, an adjustment of Cameco’s and Kazatomprom’s participating interests in JV Inkai.

6.2 Exploration and development history

Historical exploration

The Inkai deposit was discovered during drilling campaigns conducted in 1976 – 1978 by Volkovskaya Expedition. By that time, prospecting and exploration programs had also resulted in the identification of the Uvanas, Zhalpak, Kanzhugan and Mynkuduk deposits. Together with the Inkai deposit, they formed a large new uranium mineralization prospect in the Shu-Sarysu depression. Exploration drilling progressed until 1996.

In Blocks 1 and 2, the main exploration grid was developed along fence lines 400 metres to 800 metres apart, with drillholes centred 50 metres apart. In several areas, this was increased to 200 by 50 metres. In contrast, by 1996 Block 3 was characterized by significantly lower densities of drilling, ranging from 800 metres by 50 metres to 1,600 – 3,200 metres by 100 – 800 metres. All historic exploration and delineation drilling, as listed in Table 6-1, was carried out prior to JV Inkai obtaining its licences for Inkai. A map of the location of the historical and current drill holes is presented in Section 10 Drilling, in Figure 10-1.

TABLE 6-1: HISTORICAL DRILLING

Block	Area (km2)		Number of holes
1		17		1,368
2		230		2,294
3		240		489

Regional and local hydrogeology studies were completed on Inkai dating back to 1979. Numerous borehole

35 2017 INKAI OPERATION TECHNICAL REPORT

tests characterize the four aquifers within the Inkai deposit: the Uvanas, Zhalpak, Inkuduk and Mynkuduk.

Main processing and satellite plants

A pilot test, using the ISR mining method, was performed in the northeast area of Block 1 starting in December 1988. The pilot leach test in the north area of Block 2 was initiated in 2002.

In September 2005, JV Inkai decided to proceed with the main processing plant to be located at Block 1, and construction began soon after. Commissioning of the front half of the main processing plant was completed during the fourth quarter of 2008, and the processing of solutions from Block 1 commenced.

In 2009, construction of the main processing plant was completed, and in February 2010, regulatory approval to commission the main processing plant was received, allowing full processing of uranium concentrate on site. Also in 2009, JV Inkai constructed and began commissioning a satellite plant to process solution recovered from Block 2. In 2011, JV Inkai received regulatory approval for processing at the first satellite plant. In 2010 planning began for the engineering and construction of a TLF at Block 3. In 2015 JV Inkai completed construction of the Block 3 TLF and began pilot production from test wellfields.

6.3 Historical mineral resource and mineral reserve

There are no historical mineral resources and mineral reserve estimates within the meaning of NI 43-101 to report.

6.4 Historical production

A pilot test, using the ISR mining method, was performed in the northeast area of Block 1 starting in December 1988. The test lasted for 495 days and recovered approximately 92,900 pounds of U₃O₈. The pilot leach test in the north area of Block 2 started in 2002 and was completed in 2006. Commercial production started in 2009. Inkai production from Blocks 1 and 2 to year-end 2016 is shown in Table 6-2.

TABLE 6-2: INKAI BLOCK 1 AND BLOCK 2 URANIUM PRODUCTION

Period	Blocks		Production (M Lbs U3O8)		Cameco’s share (M Lbs U3O8)
1988 – 1990		1		0.1		—
2002 – 2006		2		2.0		1.2
2007		2		0.3		0.2
2008		2		0.5		0.3
2009		1 & 2		1.9		1.1
2010		1 & 2		4.3		2.6
2011		1 & 2		4.2		2.5
2012		1 & 2		4.4		2.6
2013		1 & 2		5.3		3.1
2014		1 & 2		5.0		2.9
2015		1 & 2		5.8		3.4
2016		1 & 2		5.9		3.4
2009-16		Total		36.7		21.5

JV Inkai is licensed to produce at an annual rate of 5.2 million pounds of U₃O₈. During 2015, the Subsoil Law in Kazakhstan was amended to allow producers to produce within 20% (above or below) of their licensed production rate in a year.

Block 3 ISR test was started in 2015 and is ongoing. At December 31, 2016, total production from test mining at Block 3 was 865,000 pounds.

36 2017 INKAI OPERATION TECHNICAL REPORT

7 Geological setting and mineralization

7.1 Regional geology

The geology of south-central Kazakhstan is comprised of a large relatively flat basin of Cretaceous to Quaternary age continental clastic sedimentary rocks. The Chu-Sarysu Basin extends for more than 1,000 kilometres from the foothills of the Tien Shan Mountains located on the south and southeast sides of the basin, and merges into the flats of the Aral Sea depression to the northwest.

The basin is up to 250 kilometres wide, bordered by the Karatau Mountains on the southwest and the Kazakh Uplands on the northeast. The basin is composed of gently-dipping to nearly flat-lying fluvial-derived unconsolidated sediments comprising inter-bedded sand, silt and local clay horizons. These sediments contain several stacked and relatively continuous, sinuous “roll-fronts”, or oxidation-reduction (redox) fronts hosted in the more porous and permeable sand and silt units (Figure 7-1).

Economic uranium mineralization within the Chu-Sarysu Basin was studied extensively from 1971 to 1991. Several uranium deposits were identified across the Chu-Sarysu and its neighbour, the Syr-Darya basin, separated by the Karatau Range uplift. These deposits have been grouped into the Chu-Syr Darya mineralized region. The Zhalpak, Mynkuduk, Akdala, Inkai, South Inkai and Budyonovskoe deposits are hosted by Upper Cretaceous sequences, and form the Zhalpak-Budyonovskoe mineralized belt situated in the northwestern part of the Chu-Sarysu Basin. The Kanzhugan, Muyunkum, Totrkuduk and Uvanas deposits are hosted by Upper Cretaceous and Paleocene-Eocene sequences, forming the Uvanas-Kanzhugan mineralized belt situated in the central part of the Chu-Sarysu Basin.

The Cretaceous and Palaeogene sediments hosting the uranium deposits are associated with large fluvial systems.

FIGURE 7-1: SCHEMATIC CROSS-SECTION OF THE CHU-SARYSU BASIN – LOOKING WEST

Karatau Mountains Diagrammatic - not to scale Syrdarya Basin Chu-Saryssu Basin Uranium deposits 07-2553-2 Neogene and Quaternary Late Cretaceous Clay/silt Medium and tine grained sands Coarse grained sand/gravel Alluvium and sediment Palaeogene Clay/silt - thick aquitard Sand Palaeozoic Shale, sandstone limestone; locally hydrocarbons-bearing Jurassic- Early Cretaceous Granite

(Source: Kislyakov and Shetochkin, 2000; modified by Cameco in 2016)

37 2017 INKAI OPERATION TECHNICAL REPORT

7.1.1 Hydrostratigraphy of the Chu-Sarysu Basin

Hydrostratigraphy plays key roles both in the formation of the uranium sandstone deposits and in mining them using the ISR method.

The Inkai deposit is located in the north-western part of the Suzak artesian basin that comprises two hydrogeological stages, an upper platform stage and a lower basement stage.

The upper platform stage is related to Quaternary-Neogene and Palaeogene-Cretaceous deposits. The hydrogeological section of the platform stage reveals two hydrogeological sub-stages. The upper hydrogeological sub-stage is the Betpak Dala aquifer (fine-grain sands) and other aquifers of sporadic occurrence. In general, these aquifers contain brackish and saline water not suitable for drinking. These upper aquifers are hydraulically isolated from the lower hydrogeological sub-stage aquifers by the regional Intymak clay aquitard of the Lower and Upper Eocene which is about 100 to 150 metres thick.

The lower basement stage contains groundwater in fractured rocks of Palaeozoic age. It contains four aquifers within Palaeocene and Upper Cretaceous strata, listed from top to bottom as follows:

• Uvanas aquifer: contains fresh groundwater suitable for household and drinking purposes. The Uvanas aquifer is widely used in the region for domestic and livestock water supply. In the nearest vicinity of the deposit, in the town of Taikonur, there are six domestic water supply boreholes operated on the Uvanas aquifer. Additionally, outside Inkai, but in its vicinity, there are a few free-flowing artesian boreholes tapping groundwater from the Uvanas aquifer for livestock watering

• Zhalpak aquifer: contains slightly brackish water which can be used for watering livestock. The aquifer is accessed by wells in proximity to Inkai. Groundwater from the Zhalpak aquifer is used for industrial and partial drinking water supply in the vicinity of the deposit site

• Inkuduk aquifer: contains brackish and slightly brackish water not suitable for drinking

• Mynkuduk aquifer: contains brackish and slightly brackish water not suitable for drinking.

Groundwater movement in the Chu-Sarysu Basin is towards the north-westerly discharge areas. The annual natural flow rate averages one to four metres, depending on the various permeabilities of the different sand horizons.

The lower aquifers have a common recharge area (the Karatau ridge and the Tien-Shan Mountains) and discharge into topographic depressions of the region-saline lands of Ashikol, Askazansor, and Lake Arys. Regional groundwater flows north-north-west. Permian claystones and siltstones underlay Mynkuduk aquifer and appear to be a regional aquitard. Elsewhere in the region, the groundwater is tapped by numerous boreholes for livestock watering. Groundwater of lower aquifers is not used at Inkai or in the surrounding area.

7.2 Local and property geology

The stratigraphic sequence at Inkai ranges from Cretaceous though to Quaternary sediments. A schematic stratigraphic cross-section of Inkai is presented in Figure 7-2.

Neogene-Quaternary sediments of continental origin form the uppermost cover. They do not host significant uranium occurrences. These are underlain by 100 to 150 metres of Palaeogene clay-dominated marine sediments. Elsewhere in the basin, these display a lower facies transition zone of brackish sediments that hosts the uranium deposits of Tortkuduk and of the Taukent area (Kanzhugan and Moynkum).

The underlying Upper Cretaceous strata are divided into three horizons, listed from youngest to oldest: the Zhalpak horizon; the Inkuduk horizon; and the Mynkuduk horizon.

Zhalpak horizon

The Zhalpak horizon is Campanian-Maastrichtian in age, and is generally comprised of a medium grained sand, with occasional clay layers.

Inkuduk horizon

The Inkuduk horizon is Coniacian-Santonian in age, and is typified by medium to coarse-grained sands, with

38 2017 INKAI OPERATION TECHNICAL REPORT

occasional gravels.

In the Inkuduk horizon, there are three sub-horizons representing indistinct transgressive alluvial cycles composed of several incomplete elementary rhythms. Lower and middle sub-horizons are composed mainly of coarse clastic sediments of channel facies while the upper sub-horizon is made of floodplain channel formations. The thickness of the Inkuduk horizon is up to 120 metres, and the depth to the bottom varies from 300 to 420 metres at the Inkai deposit, being a function of both basin architecture and the topography.

The general plan of the river network at the time within the deposit did not change significantly. Relatively dissected topography, closeness of uplifted alimentation zones facilitated deposition of mottled and coarse clastic poor sorted sediments alternating in the section. Interbeds of siltstone-sand clays, medium and fine grained sands are subordinate in the Inkuduk horizon.

Mynkuduk horizon

The Mynkuduk horizon is Turonian in age, uncomfortably overlying the Permian argillites and dominated by fine to medium-grained sands. These sands are generally well sorted, reflecting a probable overbank environment.

Sediments of the Mynkuduk horizon represent an alluvial cycle of the first order where several (up to ten) elementary rhythms with a thickness up to several metres can be identified. Each of them begins with coarse, poorly sorted gravel, inequigranular sands with gravel and pebble and ends with small, clastic rocks, sometimes interbeds (up to 20 centimetres) of dense sands with carbonaceous cement. In some areas in the basal part of the horizon, mottled sandy clays and siltstones of floodplain facies are developed.

The dominating colour of the rocks is greyish-green to light-grey for the channel sand-gravel sediments. The total thickness of the sediments of the Mynkuduk horizon in the area is 60 to 80 metres.

Regular alternation of channel sediments with floodplain sediments is characteristic of lateral direction, where initial mottled and green sand-clay formations in floodplains and watersheds are replaced by channel midstream, grey bar-sand rocks.

The depth to the Paleozoic unconformity increases to the west and south. At the east end of the Mynkuduk deposit, the unconformity is at a depth of about 250 metres. It deepens to 350 to 400 metres where the Mynkuduk and the Inkai deposits meet, to 500 to 600 metres at the south end of Inkai, and to more than 700 metres at Budyonovskoe deposit.

39 2017 INKAI OPERATION TECHNICAL REPORT

FIGURE 7-2: SCHEMATIC STRATIGRAPHIC COLUMN FOR THE CHU-SARYSU BASIN

Granite Jurassic Cretaceous System Series Subseries Stage Formation, horizon, sequence Notation Thickness, m Paleogene Oligo- cene Upper Lower Lower-Middle Upper Paleocene Eocene Lower Middle Upper Ceno- lanian K2Cm 10-30 Santonian-Maastrichtian cian Turonian Albian Uvanas (Kanzhugan) 5-70 Tantay Betpaqdala P33- N11 10-50 Mynkuduk Inkuduk Zhalpak Ikan 5-60 Intymak P22-3 20-130 Uyuk -P,2-P21 5-65 K2t1 J1-2 0-400 PZ K2st -P1 30-90 K,ab 0-140 K2t2 -St 20-80 40-120 Togusken n12 - 20-300 ft Neogene puater- Miocene Pliocene Lithologic column Sholapsspe Inkai. Uvanas, Kanzhugan Akdala Akdala Mynkuduk Moinkim, Tortkuduk Budennovskoe, South Inkai Description of rocks Takyr sand sandy loam, and loam; alluvial sand, loam, and gravel Pebblestone, gravelstone with interlayers of pale and brown clays Brown and pale clays with interlayers of pale and rusty yellow inequigranular sands, limestone, and marlstone Pinkish pale, brown, variegated calcareous and sandy clays; polymictic inequigranular sand; interlayers, lenses, and nodules of calcareous sandstone; bones of vertebrals Red-brown and brick red calcareous sandy clay; interlayers and lenses of clayey silt and sand (commonly at the base); ostracode complex is identified Dark gray, up to black clay with horizontal bedding and fish remains Bluish green clay giving way to silt and sand toward basin margins Gray-green and green bedded clays with fish remains and pelecypod shells; medium- and fine-grained sands in the east; interlayers of opoka-like clay at the base; basal pattum layer with quartz and collophane gravel and remains of shark teeth and bones Gray and yellow sands, coarse- and medium-grained at the roof and bottom and medium-to-fine-graine in the middle part; siltstone, clay, and calcareous sandstone interlayers; coalified plant remains and sulfide disseminations Gray and greenish gray silt, silty sandstone, and sand; gray and black clays Gray, yellow, and whitish sands with interlayers of gray and black clays and sandst one grading into gray and greenish gray clays; coalified plant remains and pyrite disseminations Gray sand with cherry hue grading into brick red clay; less abundant black and variegated sands Green, variegated, and black (humified) clay, silt, and silty sandstone grading into medium- and coarse- grained sand; Greenish pale, gray, and yellow medium- and less frequent coarse- and fine-grained sands with interlayers of green, gray, and variegated clays and clayey sand Gray, whitish yellow inequigranular and medium-grained sands with fragments of coalified wood; interlayers of dark gray, up to black clay Inequigranular and medium-grained sand, sandstone with carbonate cement as interlayers; clay and pattum in the upper part; prevalent initial coloration is red or variegated; superimposed coloratino is green, yellow, or whitish Gray, greenish-whitish, yellow, inequigranular and medium-grained, quartz-feldspar, with gravel and sporadic pebbles, coalified plant detritus; interlayers 01 gray and dark gray clays and s anas tone itwh carbonate cement Variegated, green, pink, and yellow inequigranular sand, gravel, and sandy clay with gravel Variegated inequigranular sand with gravel and pebbles; gray sandy clay in the upper part of the uint Sand and gravel; gravel and pebbles at the base; clayey sand and sandy day in the upper part Light gray, greenish gray, yellow medium-grained and inequigranular quartz-feldspar sands: interlayers of gray and green clays in the middle and upper parts and sandstone with carbonate cemnet Light gray and less frequent greenish gray and pink medium-grained and inequigranular sands with gravel and pebbles in the lower part; interlayers of gray and varicolored clays Variegated sandy clay with pebbles and gravel; sand interlayers Sand, sandstone, siltstone, black coaly clay, and conglomerate Gray, dark gray, black, occasionally variegated conglomerate, gravelstone, sandstone, marlstone, siltstone, mudstone with lignite seams; less abundant sand and clay Permian basement rocks: folded red and grey-colored argillites, sandstones

(Source: Kislyakov and Shetochkin, 2000; modified by Cameco in 2016)

40 2017 INKAI OPERATION TECHNICAL REPORT

7.2.1 Local hydrogeology

The unconsolidated Upper Cretaceous sediments provide an excellent groundwater-storing reservoir, some 250 to 300 metres thick. This reservoir is regionally confined by the underlying Palaeozoic rocks and the overlying thick Palaeogene marine clays (Intymak, Uyuk and Ikan aquitards). To varying degrees, there is local confinement created by the sedimentation cycles, with each cycle including fine sands to silts and occasional clay seams at the top.

The Upper Cretaceous groundwater regime exhibits a layered sequence of aquifers due to gravity separation by different salinity levels, or total dissolved solids (TDS). At Inkai, from youngest to oldest, top to bottom these are:

• Uvanas & Betpak Dala fresh water (0.6 – 0.8 grams per litre TDS) aquifer

• Zhalpak brackish water (1.1 – 1.5 grams per litre TDS) aquifer

• Inkuduk salt water (2.3 – 3.6 grams per litre TDS) aquifer

• Mynkuduk salt water (2.7 – 4.5 grams per litre TDS) aquifer.

The confined Upper Cretaceous aquifers produce artesian conditions where the topography is depressed below the piezometric surface of about 135 – 140 metres above sea level. The general water table is at a depth of eight to ten metres at Inkai.

The Inkai deposit includes the lower hydrogeological sub-stage (Paleocene and Upper Cretaceous). The hydrogeological conditions for the Quaternary-Upper Eocene sediments are not described here because aquifers of the upper sub-stage are not hydraulically connected to the Inkai deposit (Volkovgeology, 2007, 2015).

Available hydrogeology information is summarized below for the entire Inkai deposit with references for different blocks as specified.

The typical feature of the Upper Cretaceous aquifers (Zhalpak, Inkuduk and Mynkuduk) is a quasi-uniform lateral structure, i.e. high heterogeneity but in a very local scale. Thus, in a scale of pumping tests, hydraulic properties vary laterally very little, even though borehole logs reveal sediments of very different grain sizes. All these aquifers present a vertical anisotropy due to low-permeable lenses and thin layers between the aquifers and sub-horizons.

Intymak aquitard (Middle to Upper Eocene)

The Intymak aquitard is composed of greenish-grey, bluish-grey intercalated, rarely massive marine clays, varying in thickness from 70 to 120 metres. Intymak clays outcrop immediately to the north-west of Block 3 in the Batykaryn river terrace. The Intymak clays comprise a regional aquitard in the Chu-Sarysu Basin.

Uyuk-Ikan aquitard (Lower Eocene)

The Uyuk-Ikan aquitard is represented by massive grey and greenish-grey marine clays. The thickness varies from 22 metres in the northern part of Block 3 to 70 metres in the southern part of Block 2.

Uvanas and Byurtusken aquifers (Lower Paleocene)

The thickness of the Uvanas and Byurtusken aquifers varies from 15 metres in the northern part of Block 2 up to 80 metres in the south and south east, beyond the deposit boundary. At Inkai, the aquifers occur at depths of 170 to 280 metres and have a thickness from 20 to 30 metres. Water bearing sediments are fine to medium grain sands.

Based on 15 single borehole pumping tests at Blocks 1 and 2 (Volkovgeology, 1991) and five cluster pump tests at Block 3 (Volkovgeology, 2007, 2015), the calculated transmissivity of the Uvanas and Byurtusken aquifer varies from 47 to 168 square metres per day, with horizontal hydraulic conductivities between 2.4 and 8.6 metres per day. Borehole yields were 1.6 to 11.0 litres per second.

41 2017 INKAI OPERATION TECHNICAL REPORT

Zhalpak aquifer (Campanian-Maastrichtian)

The depth to the bottom of the Zhalpak aquifer varies from 195 metres in the northern part of Block 3, to 270 metres in the northern part of Block 2, and to 355 metres in the southern part of Block 1. The aquifer thickness is 40 to 60 metres. Water bearing sediments are fine and medium grained sands with gravels. In the top of the Zhalpak Formation, there is a one to 10-metre layer of clays and fine sands that separates the Zhalpak aquifer from the overlying Uvanas aquifer. This layer is assumed to be the Upper Zhalpak aquitard (Geolink, 2003, Volkovgeology, 2007, 2015). There are clays and argillaceous sands underlying the Zhalpak aquifer that serve as local aquitards. Those low-permeable sediments are somewhat discontinuous; therefore, some hydraulic connection between the Zhalpak and underlying aquifers is possible.

The hydraulic properties of the Zhalpak aquifer were characterized by 10 pumping tests within Block 2, and seven pumping tests within Block 3. From their interpretation (Volkovgeology, 1991, 2007, 2015), the estimated transmissivity varies from 226 square metres per day to 575 square metres per day, with an average value of 413 square metres per day. Elsewhere in the mine, transmissivities of the Zhalpak aquifer were estimated within a similar range for Block 2. Horizontal hydraulic conductivities on Block 2 were estimated at the range 5.5 to 11.4 metres per day, with an average value of 8.9 metres per day.

Inkuduk aquifer (Upper Turonian-Santonian)

The top of the Inkuduk aquifer is located at an approximate depth of 250 to 380 metres, with an average thickness between 110 and 130 metres. The aquifer contains fine-to-coarse granular sands with gravels and pebbles. Three sub-layers are identified and listed from top to bottom as: sands with clay lenses; fine and medium-grained sands; and sands with gravels and pebbles.

These sub-layers are not always present, and there are no clear boundaries between them. Towards northeast of Block 2 and the entire site, the clay content is slightly increasing in all sub layers. Clay lenses typically separate the Inkuduk aquifer from the upper and lower horizons. This aquifer hosts a portion of the mining zone. In Blocks 2 and 3, uranium mineralization develops within the middle and the lower parts of the Inkuduk aquifer, down to the depths of 270 to 370 metres, depending on local conditions.

The Inkuduk aquifer is characterized by 27 borehole tests conducted by Volkovgeology prior to 1991, and 38 borehole tests comprising eight cluster aquifer pump tests, as well as 28 single well tests conducted at Block 3 from 2010 to 2013 by Volkovgeology, under the contract with JV Inkai. Horizontal hydraulic conductivities obtained from different parts of test interpretation graphs were between 6.3 and 22.8 metres per day, with 80% of values in the range 10 to 18 metres per day.

Borehole yields for the Inkuduk aquifer in Block 2 vary between 3.2 and 18.30 litres per second, and specific borehole yields vary between 0.8 and 2.4 litres per second. Generally, hydrogeological tests revealed that horizontal hydraulic conductivities of the Inkuduk aquifer were consistent through the whole cross-section. Hydraulic conductivity of the lower sub-horizon was estimated in the range of 9.2 to 16.1 metres per day; for the middle sub-horizon, 11.8 to 15.8 metres per day; and for the upper sub-horizon, approximately 13 metres per day. Transmissivities for different sub-horizons were estimated, on average, as 472 square metres per day, 613 square metres per day, and 336 square metres per day for the lower, the middle, and the upper horizons, respectively.

Mynkuduk aquifer (Lower Turonian)

The top of the Mynkuduk aquifer is encountered at depths of 360 to 370 metres, with a thickness of 30 to 40 metres in the northeast, increasing to 70 to 90 metres in the south-west. The average thickness of the aquifer at Block 2 is 48 metres.

The aquifer lies on the Paleozoic argillaceous sediments that are recognized as a regional aquitard. The water bearing sediments are sands of various grain sizes with clays, gravels and pebbles. Generally, coarse sand and gravel fractions are associated with the upper part of the aquifer, while more clayish fractions are associated with the lower part of the aquifer. Towards the north-east of Block 2 and the entire site, the clay content is slightly increasing in all sub layers, particularly in the upper sub-horizon of the Mynkuduk aquifer.

42 2017 INKAI OPERATION TECHNICAL REPORT

The Mynkuduk aquifer hosts a portion of the deposit. In Block 2, the lower boundary of uranium mineralization is found for different locations at depths of 380 to 430 metres; however, this aquifer contains minor mineralization (compared to the Inkuduk aquifer on Block 2).

The Mynkuduk aquifer is characterized by 95 boreholes, 20 hydrogeological single borehole tests, 36 multi-borehole tests and five injection tests (Volkovgeology, 1991). Borehole yields vary from 1.5 to 16.7 litres per second, with borehole specific yields between 0.2 to 2.6 litres per second.

Horizontal hydraulic conductivities at the deposit area vary from 7.1 to 13 metres per day, with the average value of 10.9 metres per day. Site transmissivities vary between 394 and 694 square metres per day, with the average value of 564 square metres per day. Block 2 was characterized by 20 borehole tests prior to 1991.

Resulting horizontal hydraulic conductivities are generally higher for Block 2 than for Block 1, with values varying between 7.4 and 17.3 metres per day, and an average value of 13 metres per day. Block 2 transmissivities obtained from pumping tests were in the range 460 to 755 square metres per day.

Vertical hydraulic conductivities were not well defined during exploration activities. They were calculated through calibration of the regional groundwater flow model by Geolink (2003).

Prevailing values of both horizontal and vertical hydraulic conductivities used by Geolink for the regional groundwater flow model are shown in Table 7-1.

TABLE 7-1: HYDRAULIC CONDUCTIVITY

Model	Hydraulic conductivity (m/d)
Aquifer/Aquitard	Horizontal	Vertical	Anisotropy ratio(rounded)
Uvanas	4.0	0.62	6 : 1
Upper Zhalpak aquitard	1 x 10-5	2.5 x 10-5	1 : 2.5
Zhalpak	14.6	0.023	635 : 1
Upper Inkuduk	3.0	0.5	6 : 1
Middle Inkuduk	10.5	0.5	20 : 1
Lower Inkuduk	14.4	0.5	30 : 1
Upper Mynkuduk	10.7	1.0	10 : 1
Lower Mynkuduk	10.3	1.0	10 : 1

Calibrated values of horizontal hydraulic conductivity are generally higher than vertical hydraulic conductivity values by about one order of magnitude, with the exception of the Zhalpak aquifer. This aquifer has discontinuous lenses of low-permeable clays and argillaceous sands with a calculated anisotropy ratio of 635:1.

7.2.2 Hydraulic connectivity

The Uvanas aquifer is confined by 100 to 150 metres of clays (regional aquitard), so it can be considered hydraulically isolated in the region from the overlying Betpak Dala aquifer.

However, Geolink (2003) data analysis and the modelling study revealed an insignificant leakage of groundwaters of the Uvanas aquifer into the overlying Betpak Dala aquifer for the northern flank of Block 1. The reason for this leakage appears to be open exploration wells that allow some hydraulic connection.

The aquifers of the lower hydrogeological sub-stage are hydraulically connected. This connection is more obvious between three lower aquifers (the Zhalpak, the Inkuduk and the Mynkuduk) that, according to borehole logs and geophysics results, do not have continuous separating low-permeability layers. These aquifers are separated from each other by clay lenses and by sediments with higher clay contents. Furthermore, a multi-stage pumping test conducted by KAPE (2002) demonstrated a hydraulic connection between the Zhalpak aquifer and the horizons of the Lower Cretaceous (e.g., Inkuduk and Mynkuduk). Re-interpretation of the Volkovgeology (1991) pumping tests conducted by KAPE (2002) also supports this hypothesis.

43 2017 INKAI OPERATION TECHNICAL REPORT

The hydraulic connection of the Uvanas aquifer with the underlying aquifers is complicated by the presence of a thin (one to 10-metre) layer of low-permeable deposits in the upper part of the Zhalpak aquifer. Previous site studies (Volkovgeology, 1991; KAPE, 2002) conclude that these two aquifers are considered hydraulically isolated. However, this conclusion was based on the presence of low-conductive sediments between these two aquifers and the results of one pumping test in the Uvanas aquifer when no drawdown was observed in the underlying aquifers. Subsequent site studies (Geolink, 2003) indicate that this conclusion may be incorrect.

Piezometric levels of the Uvanas aquifer are very close to that of the Zhalpak aquifer (the difference may run to less than 10 to 20 centimetres) and piezometric level data for both aquifers show a synchronous decrease over the last 20 years. This evidence suggests a hydraulic connection between the aquifers in the lower hydrogeological sub-stage. However, the degree of interconnection between the Uvanas aquifer and Zhalpak aquifer is significantly less than between the Zhalpak and Inkuduk, and Inkuduk and Mynkuduk aquifers.

7.2.3 Piezometric measurements

The majority of water level measurements which were taken in Block 1 concerned the Mynkuduk aquifer, while measurements at Blocks 2 and 3 were carried out on Inkuduk and Zhalpak aquifers (Volkovgeology, 1991, 2007, 2015; KAPE, 2002). Overall, piezometric data indicate that the Uvanas, Zhalpak, Inkuduk and Mynkuduk aquifers are confined, with piezometric levels varying from approximately 20 metres above ground surface on the southeast to about 20 metres below ground surface on the north and north-west. The horizontal hydraulic gradients at Inkai are relatively small (e.g., 2 to 3 x 10-4). Estimated lateral groundwater movement is approximately 0.5 to 3.0 metres per year.

Concurrent piezometric measurements from four aquifers in cluster wells K1, K2 and K15 indicate similar piezometric levels with differences of 0.7 metres (Volkovgeology, 1991; Geolink, 2003). This observation suggests that the natural piezometric surfaces for these aquifers coincide.

Monitoring of piezometry variations by Volkovgeology (1991) revealed that, between 1981 and 1991, the site piezometry was gradually declining in all four aquifers. This drop was observed throughout at the mine, including boreholes in Block 2. The drop of piezometric levels between 0.3 and 1.2 metres per year was observed in the majority of exploration boreholes, with a site average of 0.5 to 0.7 metres per year. This drop in the piezometric surface was likely related to aquifer exploitation beyond the mine site, in the southern, south-eastern and south-western parts of the West-Chu artesian basin. Other reasons could be the presence of free-flowing artesian boreholes used for livestock watering.

Between 2001 and 2004, piezometric levels of the Upper Cretaceous complex continued to decline, but at a slower rate of 0.1 to 0.3 metres per year (KAPE, 2006). Decline of piezometric levels is expected to continue to slow down due to abandonment of free-flowing boreholes within and adjacent to the mine.

7.2.4 Groundwater chemistry

Typical vertical hydrochemical zoning is observed in the water-bearing complex of the lower hydrogeological sub-stage. There is a regular top-down increase in total dissolved solids from 0.6 to 4.7 grams per litre. These aquifers have also lateral hydrochemical zoning. As groundwater flows from its source towards north-west the salinity of water increases and the hydrochemistry changes.

Apart from upper zones of the Zhalpak aquifer, the groundwaters are not suitable for drinking due to high TDS, but up to certain depth (usually top of the Inkuduk aquifer) can be used for livestock watering.

Groundwater in the Zhalpak aquifer is fresh to slightly brackish (TDS=0.9 to 1.8 grams per litre). Uranium concentrations are 1.0 x 10-7 to 2.1 x 10-6 grams per litre; radium concentrations 1 x 10-12 to 6 x 10-12 grams per litre.

These concentrations are consistent with typical background concentrations of these elements in sedimentary rocks. Brackish and salt water is found in the two lower aquifers.

TDS of the Inkuduk aquifer vary between 1.2 and 3.6 grams per litre, increasing with depth of burial. The

44 2017 INKAI OPERATION TECHNICAL REPORT

groundwaters of the upper sub-horizon with TDS less than 1.6 grams per litre are suitable for industrial needs. TDS of the Mynkuduk aquifer is quite high: 2.7 to 4.7 grams per litre, increasing from north to south with deepening of the layer. The groundwaters from both aquifers are of a SO4-Cl-Na type. Uranium mineralization in Block 2 occurs in the middle and upper parts of the Inkuduk aquifer. In Block 1, uranium mineralization generally associates with Mynkuduk aquifer.

7.3 Mineralization

7.3.1 Host rocks

As presented in Figure 7-3, the mineralization is hosted by three horizons: the Middle Inkuduk horizon; the Lower Inkuduk horizon; and the Mynkuduk horizon. Horizons are divided into sub-horizons as shown in Table 7-2. Ten mineralized zones have been identified on Blocks 1, 2 and 3. These include four zones in the Mynkuduk horizon labelled with indices 1, 2, 3 and 15, and six zones in the Inkuduk horizon labelled with indices 10, 10a, 11, 12, 13 and 14. Their distribution among Blocks and relationship to the horizons are also listed in Table 7-2.

TABLE 7-2: HORIZONS AND SUBHORIZONS DIVISION

Horizon	Horizon index	Sub-Horizon	Sub Horizon index	Zones indices in Blocks
				Block 1	Block 2	Block 3
		Upper part of Middle Inkuduk	in23
Middle Inkuduk	in2	Middle part of Middle Inkuduk	in22		11, 12, 13	11
		Lower part of Middle Inkuduk	in21
Lower Inkuduk	in1	Upper part of Lower Inkuduk Lower part of Lower Inkuduk	in12 in11	10a	10	14
		Upper Mynkuduk	mk3		2
Mynkuduk	mk	Middle Mynkuduk	mk2			15
		Lower Mynkuduk	mk1	3	1

45 2017 INKAI OPERATION TECHNICAL REPORT

FIGURE 7-3: INKAI URANIUM ROLL FRONT

Mineralization by sub-horizon index N in23 in22 in21 in12 in11 mk3 mk2 mk1 Land Tenure Block 1 Mining allotment Block 2 Mining allotment Blocks 2&3 Exploration allotment Processing Facilities Block 3 TLF Processing Facilities Satellite-1 MPP Cameco Km 0 1 2 4 6 8

46 2017 INKAI OPERATION TECHNICAL REPORT

Block 1

• Bulk of the uranium mineralization contained in the Mynkuduk horizon and extending over more than 10 kilometres

• Small portion contained in the Lower Inkuduk horizon

• Depth to the bottom of mineralization in the Mynkuduk horizon ranges from 450 to 528 metres. Average depth is 490 metres

• Mineralization width in plan view ranges from 40 to 600 metres and averages 250 metres

• Mineralized levels are generally at the lower part of the horizon, close to the Permian-Upper Cretaceous unconformity, but may also be found at a higher level, above the oxidized part of the Mynkuduk.

Block 2

• Bulk of the mineralization contained in the Lower and Middle Inkuduk horizons extending over more than 35 kilometres

• Small portion is contained in the Mynkuduk horizon

• Depth to the bottom of mineralization in the Inkuduk horizons ranges from 300 to 426 metres. Average depth for Lower Inkuduk is 390 metres and 340 metres for the Middle Inkuduk

• Mineralization width for the Inkuduk horizon in plan view ranges from 40 to 1400 metres and averages 350 metres.

Block 3

• Bulk of mineralization contained in the Lower and Middle Inkuduk horizons extending over more than 25 kilometres

• Small portion contained in the Mynkuduk horizon

• Depth to the bottom of mineralization for the Middle Inkuduk horizon ranges from 278 to 415 metres. Average depth is 330 metres. Width in plan view ranges from 40 to 1600 metres and averages 350 metres

• Depth to the bottom of the Lower Inkuduk horizon is 331 to 445 metres. Average depth is 360 metres. Width in plan view ranges from 40 to 600 metres and averages 250 metres

• Depth to the bottom of the Mynkuduk horizon is 360 to 16 metres. Average depth is 430 metres. Width in plan view ranges from 40 to 350 metres and averages 200 metres.

Regional structures in the Chu-Sarysu Basin have had some control to the development of the sedimentary facies and to the movement of uranium bearing groundwater to form the roll fronts. Structure contour maps, on the surface of the basement Palaeozoic rocks, indicate that perhaps linear depressions in the surface have coincidence with overlying roll fronts; the hydrostratigraphy of the Cretaceous formations being the primary control to mineralization.

7.3.2 Oxidation and mineralization

Different lithologic and geochemical types have been studied for the content of their organic carbon, total iron, and iron contents.

The zone of uranium mineralization is located along the geochemical barrier marked by the contact zone of the incompletely oxidized rock and the primary grey-coloured rock. Iron oxides are nearly absent in this zone. Organic carbon content is decreased. Some associated pyrite, and sometimes carbonates, are observed. Four geochemical host rocks types can be identified at the deposit:

47 2017 INKAI OPERATION TECHNICAL REPORT

• diagenetically reduced grey sands and clays containing coalified plant detritus

• green-grey sands and clays, reduced both diagenetically and epigenetically by “gley” soil (anaerobic organic) processes

• non-reduced initially mottled sediments

• yellow-coloured lithologies that underwent stratal epigenetic oxidation.

The initial colours are typical of channel of flood-plain facies. Diagenetically reduced grey sands and gravel of channel facies are more favourable for uranium deposition compared to greenish-grey or grey-green sands.

Occurrence and development of facies of Upper Cretaceous continental mottled alluvial formation is controlled by syn-sedimentary structures consistent with the tectonic pattern of the depression. Structural-facies control of mineralization is clearly expressed in mineralization of the Mynkuduk horizon. In the upper horizons such control is weakly expressed.

From observations of core, the redox boundary can be readily recognized by a distinct colour change from grey and greenish-grey on the reduced side to light-grey with yellowish stains on the oxidized side, stemming from the oxidation of pyrite to limonite and consumption of organic carbon.

The propagation of the oxidation fronts is affected by hydrostratigraphy (controlling fluid paths and velocities), and rock composition (controlling redox reactions). The implied groundwater movement direction was from the southeast to northwest, leading to the formation of oxidation tongues also oriented to the northwest. It gives rise to characteristic geometries of the redox fronts and associated mineralization described in more detail in the following section.

7.3.3 Geometry

The Inkai deposit has developed along a regional system of superimposed redox fronts in the porous and permeable sand units of the Chu-Sarysu Basin. The overall strike length of the redox front at Inkai is approximately 60 kilometres. The overall stratigraphic horizon of interest in the basin, located between 290 and 520 metres below surface, is approximately 200 to 250 metres thick.

Plan view

In a plan view the mineralized fronts have an irregular sinuous shape comprising southwestern and northeastern limbs joining to form prominent northeast-oriented frontal crests and southeast-oriented posterior troughs observed at a variety of scales. The wavelength of the larger-scale sinusoid varies from one to five kilometres, with the corresponding peak-to-peak amplitude varying from two to ten kilometres. Often, the irregular shape of a larger scale sinusoid is further complicated by smaller scale irregular sinusoids with more variably oriented limbs, crests and troughs, with wavelengths ranging from 100 to 500 metres and amplitudes from 200 to 1,000 metres. The width in a plan view of the limbs is typically narrower than that of the frontal crests and rear troughs. The crests and the troughs usually contain most of the metal accumulations. There are notable differences in the mineralization width in a plan view between different horizons and sub-horizons, as well as between different locations for the same sub-horizon, as presented in Figure 7-3. Overall, the mineralization in the Mynkuduk and Lower Inkuduk horizon is less than 40 to 100 metres wide in the limbs, and reach 600 metres in the crests and troughs. The mineralization in the Middle Inkuduk horizon tends to be comparatively wider, especially in the central part of the deposit. It is 50 to 400 metres in the limbs, and reaches 1,400 metres in the crests and troughs in the central part of the deposit, but its width decreases and almost completely pinches out in the northern part of Block 3.

In the Middle Inkuduk horizon, the mineralization is found in coarse sands of the main channel or streambed facies. Here, the mineralized fronts are the farthest advanced to the northwest in the direction of groundwater flow. In the Lower Inkuduk and Mynkuduk horizons, mineralization usually lags somewhat behind, along a complex system of superimposed suturing oxidation tongues. Stacked mineralization is also observed where it occurs in different horizons over the same area; for example, in the north-east of Block 2 and south-west of Block 3, where up to five mineralization levels are stacked.

48 2017 INKAI OPERATION TECHNICAL REPORT

Cross-section view

A variety of roll-front morphologies are observed, as represented in Figure 7-4, and are classified in five major groups:

• simple rolls, mineralization along the nose or edge of a single oxidation tongue, including the classic C-shaped rolls (A, E and H)

• cascade type, where two or more superimposed oxidation tongues form overlapping rolls (stacked mineralization) (B and D)

• adjacent type, where two or more tongues develop in the same level enclosing mineralization in between (C)

• combined cascade-adjacent type (G)

• tabular (F)

7.3.4 Mineralogy

Uranium

The main uranium minerals are sooty pitchblende (85%) and coffinite (15%). Sooty pitchblende occurs as micron-sized globules and spherical aggregates, while coffinite forms tiny crystals. Both uranium minerals occur in pores on interstitial materials such as clay minerals, as films around and in cracks within sand grains, and as pseudomorphic replacements of rare organic matter, and are commonly associated with pyrite. The latter seems to have formed after the growth of pitchblende as it often coats or rims the uraniferous films and aggregates. No other potentially deleterious trace elements have been detected. All potential contaminants such as molybdenum (Mo), selenium (Se) and vanadium (V) occur in background levels consistent with average values for the Earth’s crustal rocks. The uranium mineralization is essentially clean and monometallic. Vanadium and molybdenum show elevated values where occasional organic debris has accumulated. The general distribution of potential contaminants in the roll-fronts is represented in Figure 7-5.

Poor and rich mineralization are distinguished not by the composition of uranium minerals but by their distribution. Poor mineralization is more dispersed than rich one. Authigenic mineralization is composed of pyrite, siderite, calcite, native selenium, chlorite, sphalerite, pyrolusite and apatite.

Trace elements

Quantitative methods of analysis in mineralized and waste sands were used to study the content of rhenium, scandium, yttrium, and the total of rare earths with yttrium, selenium and molybdenum.

Selenium was studied by X-ray spectral analysis on the grid 800 x 100 – 50 metres (the total number of samples comprised about 30,000). Selenium is almost absent in uranium mineralization. It is located only along the margins of grey sands, where it is fixed in the sub-zone of radium enrichment of up to two metres thick. The average selenium bodies are one to two metres thick and grades of 0.01 to 0.03%. They typically do not coincide with the contours of uranium mineralization.

Molybdenum accompanies uranium mineralization in trace amounts. Molybdenum content in mineralized uranium rocks is two to five times that in waste rocks. The molybdenum content in oxidized permeable rocks is 20 to 50% lower than that in non-oxidized waste rocks. Anomalous molybdenum content does not extend outside uranium occurrences

49 2017 INKAI OPERATION TECHNICAL REPORT

FIGURE 7-4: ROLL-FRONT MORPHOLOGY OF MINERALIZATION

Inkai Roll Front - Morphology of Mineralization B A C E D F G Legend: Alluvium Paleozoic Basement Oxidized Sandstone Oxidation Front H Reduced Sandstone Uranium Mineralization Clay , Siltstone Drill Hole

(Source: Kislyakov and Shetochkin, 2000; modified by Cameco in 2016)

50 2017 INKAI OPERATION TECHNICAL REPORT

FIGURE 7-5: TYPICAL CHARACTERISTICS OF A ROLL-FRONT DEPOSIT

Typical ” Roll - Front “ Uranium Deposit Cameco (a) A 1 B 2 2 D, (m) 500 500 0 u V Mo (C) Se 0,2 (b) % 0.1 0 0,02 (c) % 0.01 CD 0 500 0 500 D, (m) (a) A - oxidized zone; B - reduced zone ; (b) distribution of uranium and vanadium ; (c) selenium and molybdenum; 1 — epigenetic ore mineralization ; 2 - argillites; D - distance in metres from margin of oxidized zone.

51 2017 INKAI OPERATION TECHNICAL REPORT

8 Deposit types

8.1 Roll-front deposits

The Inkai uranium deposit is a roll-front type deposit. Roll-front deposits are a common example of stratiform deposits that form within permeable sandstones in localised reduced environments. Microcrystalline uraninite and coffinite are deposited during diagenesis by oxygenated and uraniferous groundwater, in a crescent-shaped lens that cuts across bedding and forms at the interface between oxidized and reduced lithologies. Sandstone host rocks are medium to coarse grained and were highly permeable at the time of mineralization.

They form in continental-basin margins, fluvial channels, braided stream deposits and stable coastal plains. Contemporaneous felsic volcanism or eroding felsic plutons are sources of uranium. In tabular mineralization, source rocks for uranium-bearing fluids are commonly in overlying or underlying mud-flat facies sediments.

Fifteen economic uranium deposits have been discovered within Cretaceous and Palaeogene sediments of the Chu-Sarysu and Syr-Darya Basins across Kazakhstan. These are grouped into the Chu-Syr Darya mineralized region, and situated within the two basins that are separated by the Karatau Range uplift.

Soviet geologists established the spatial relation for uranium mineralization between the boundaries of the yellow oxidized sand sediments of aquifers and unoxidized grey sand sediments in Uzbekistan in 1956. These were named “bed oxidation zones” deposits by Soviet geologists, and characterised by:

• hydrodynamic conditions of infiltration artesian basins

• arid climate conditions of the mineralization deposition epoch

• favourable lithologic-geochemical type of host rocks (grey-coloured, easily permeable sediments)

8.1.1 Oxidation state

The geological model for stratabound roll-front deposits, applied at the exploration stage, relates to the identification of the following zoning:

• Oxidation: Siderite, pyrite, biotite, chlorite and glauconite are absent in the completely oxidized zone. The mineralization contains iron hydroxides. The granular fraction includes some kaolinized feldspars. The predominant colour of the rock is yellow, ochre yellow and orange. The completely oxidized sub-zone can extend for tens and hundreds of kilometres into the basin, measured from the outcrop at the basin margin.

• Incomplete oxidation: In the sub-zone of incomplete oxidation, iron hydroxides occur locally, resulting in the rock having a mottled appearance. Minor quantities of plant detritus, siderite, and glauconite may be present. The predominant colours are yellowish-green and whitish-yellow. Between the zone of complete and partial oxidation, one sometimes observes a sub-zone of re-deposited red hematite ochres. The sub-zone of incomplete oxidation can extend from a few kilometres to some tens and hundreds of kilometres.

• Primary reduced: The zone of barren grey rock has a characteristic mineral composition of rock common for the stratigraphic horizon under consideration. The colour is grey or light grey. Unoxidized pyrite and small quantities of bitumen or carbon trash are common and contribute to the grey colour.

The zone of uranium mineralization is located along the geochemical barrier marked by the contact zone of the incompletely oxidized rock and the primary grey-coloured reduced rock. Iron oxides are nearly absent in this zone.

Carbonaceous plant detritus remains non-oxidized. Some associated pyrites, and sometimes carbonates, are observed. Uranium minerals, including sooty pitchblende, pitchblende and coffinite, may be associated with pyrite and organic matter. The uranium-bearing zone generally extends for tens of metres or, rarely, for a few hundred metres (in cross-section across the roll front), but may extend for many kilometres along the roll-front.

52 2017 INKAI OPERATION TECHNICAL REPORT

The geochemical properties of the host rocks are determined by their primary composition and particle size distribution, as well as by their permeability and other hydrologic characteristics. The reduced chemical state of the host rocks develops during diagenesis following deposition, or possibly as the result of some event or events taking place later in the geologic history, such as introduction of hydrocarbons and/or hydrocarbon gases.

The reduction processes are accompanied by the development of grey, dark-grey and greenish-grey coloured host rocks. Epigenetic alteration taking place during reduction, include bituminization, carbonation, sulphidation, argillisation and decomposition of iron minerals result in bleaching of the sediments.

53 2017 INKAI OPERATION TECHNICAL REPORT

9 Exploration

Blocks 1 and 2 are in production. All exploration work was carried out prior to JV Inkai being established and is described in Section 6.2 Exploration and development history. No further exploration is planned besides drilling with the objective to convert mineral resource categories to a higher level. Block 3 exploration work was with drilling only and is covered in Section 10 Drilling.

54 2017 INKAI OPERATION TECHNICAL REPORT

10 Drilling

10.1 Uranium exploration and delineation drilling

JV Inkai’s Block 1, 2 and 3 uranium exploration and delineation drilling programs were conducted by drilling vertical holes from surface. Delineation of the deposits and their geological structural features were carried out by drilling on a grid at prescribed density of 3.2 to 1.6-kilometre line spacing and 200 to 50-metre hole spacing with coring. Increasing level of geological knowledge and confidence is obtained by further drilling at grids of 800 to 400 x 200 to 50 metres with coring and 200 to 100 x 50 to 25-metre grid, usually without core.

Vertical holes are drilled with a triangular drill bit for use in unconsolidated formations down to a certain depth and the rest of the hole is cored. At the Inkai deposit, approximately 50% of all exploration holes are cored through the entire mineralized interval, and 70% core recovery is required for assay sampling as described in Section 11.1 Sample density. Radiometric probing, hole deviation, geophysical and hole diameter surveys are done by site crews and experienced contractors.

As the mineralized horizons lie practically horizontal and the drill holes are nearly vertical, the mineralized intercepts represent the true thickness of the mineralization.

The total number of holes drilled at Inkai for each block is listed in Table 10-1. The locations of the drillholes are shown in Figure 10-1.

TABLE 10-1: DELINEATION DRILLING AT INKAI

Block	Type	Number of holes
1	Historical JV Inkai		1,368 67
2	Historical JV Inkai		2,294 270
3	Historical JV Inkai		489 3,748

10.2 Methodology and guidelines

The methodology of delineation programs and all related procedures for geological, geophysical, analytical work follows the recommendation of the SRC guidelines for exploration and delineation of uranium deposits. For further discussion of the application of the SRC guidelines see Section 14.2 Key assumptions, parameters and methods.

10.2.1 Timeline for exploration-delineation drilling programs

No exploration activity was conducted by JV Inkai at Blocks 1 and 2 before 2013. Instead, historical data was relied upon to estimate Inkai’s mineral resources and reserves. From 2013 to 2016, delineation drilling was conducted at Block 1 (67 drillholes) and Block 2 (270 drillholes) to better establish the mineralization distribution and to support further development and wellfield design.

Extensive exploration and delineation work was completed in four phases at the northern flank (Block 3) of the

55 2017 INKAI OPERATION TECHNICAL REPORT

Inkai deposit, by JV Inkai from 2006 to 2016. Refer to Figure 10-1 for the distribution of drilling by periods.

JV Inkai’s Geology department oversaw the exploration drilling program, including the drilling program and management of contractors. JV Inkai has retained a contractor, Volkovgeology, to direct and coordinate day-to-day drilling activities, and to ensure the quality of drilling, core recovery, surveying, geological logging, sampling, assaying and daily data processing. All downhole geophysical logging was performed by JV Inkai logging crews, as described in Section 11.5 Geophysical logging. Drilling was performed by a number of contractors, supervised by Volkovgeology.

All drilling conducted on grids of 400 by 50 metres and larger were cored with the core recovery of at least 70% in at least 70% of the drillholes, where the infill drillholes in 200 by 50 metre drilling patterns consist of predominately coreless drillholes, in compliance with the requirements of the SRC of the Republic of Kazakhstan.

Phase 1: 2006 – 2009

The first phase focused on drilling on an 800 x 50-metre grid pattern in the southwestern part of Block 3. Also, the mineralization trends were followed along the northwestern border using sparser (800 to 1,600 x 100 to 200-metre) drilling patterns. Mineralization zones were delineated and a significant increase in their extent (compared with previous results) was established in the more densely drilled south-western part of Block 3. The purpose of this phase was to support a commercial discovery application, which was achieved, as required under the Kazakhstan regulations. Further drilling was aimed at the commercial discovery assessment in accordance with the requirements of the Kazakhstan regulations.

Phase 2: January 2010 – May 2011

The second phase was aimed at developing an 800 x 50-metre infill drilling grid pattern throughout the mineralized trend identified within the Inkuduk horizon along the northwestern border, as well as the trend developed in the Mynkuduk horizon along the southern border. This phase allowed for tracing the presence of mineralization throughout Block 3 with a greater degree of certainty. In addition, the development of 200 x 50-metre drilling grids patterns began in the southwestern part of Block 3, with the goal of identifying sites and designing test wellfields in the Lower Inkuduk and Lower Mynkuduk horizons. The sites for test wellfields were identified by May 2011.

Phase 3: June 2011 – December 2013

In the third phase of drilling, progressively tightening drilling grids (from 800 x 50-metre to 400 x 50-metre to 200 x 50-metre) were used to delineate mineralization in the southwestern, western and northern parts of Block 3. In 2012, the design for the test wellfields was completed. Drilling the test wellfields started in August and was finished in December 2012.

Phase 4: August – November 2016

In the fourth phase of drilling, 69 coreless infill delineation holes were drilled on a 100 x 50-metre grid on a selected site focusing on the Mynkuduk mineralization to confirm the continuity of the mineralization and its categorization, as per recommendation of the SRC. Thirty-nine core drillholes were drilled at the ISR test wellfields to study the recovery process.    

10.3 Factors that could materially affect the accuracy of the results

There are no known drilling, sampling or core recovery factors that could materially affect the accuracy and reliability of the results. For a further discussion of sampling and core recovery factors, see Section 11 Sample preparation, analyses and security.

56 2017 INKAI OPERATION TECHNICAL REPORT

FIGURE 10-1: DRILL HOLE COLLAR LOCATION MAP

Drilling by type and period N x ISR tests • Hydrogeological wells • Delineation 2013 - 2016 • Historic 1978-1991 • Block 3 2006-2009 Block 3 2010 • Block 3 2011 • Block 3 2012 • Block 3 2013 Land Tenure Block 1 Mining allotment Block 2 Mining allotment Blocks 2&3 Exploration allotment Processing Facilities Processing Facilities Block 3 TLF Satellite-1 MPP Cameco Km 0 1 2 4 6 8

57 2017 INKAI OPERATION TECHNICAL REPORT

11 Sample preparation, analyses and security

The sampling, sample preparation, analyses, geophysical downhole logging during the exploration and delineation programs follow the procedures and manuals which adhere to the requirements set out in the SRC guidelines as described in Section  14.1.3: Key methods

11.1 Sample density

Sampling of the mineralization is based on drilling grids that progressively tighten with increasing levels of geological knowledge and confidence. The line spacing with drillhole spacing decreases as follows:

• 3.2 – 1.6 kilometres x 200 – 50 metres, all drillholes are cored through productive horizon

• 800 – 400 metres x 200 – 50 metres, all drillholes are cored through productive horizon

• 200 – 100 metres x 50 – 25 metres, most drillholes are coreless

11.2 Core recovery

At Block 1, 66% of cored drillholes have recovery higher than 70%. At Block 2, 54% of cored drillholes have recovery higher than 70%. At Block 3, 85% of cored drillholes have recovery higher than 70%. Core recovery is generally considered to be acceptable, given the unconsolidated state of the mineralized material. Resource estimates are based on gamma log results. Core sample assays are composited for correlation purposes if core recovery was at least 70%.

11.3 Procedure for sampling and sample preparation

Drill core is logged in log journals following the developed manuals and representative core samples are selected for the following analyses and tests:

• determination of the content of uranium, radium and associated elements

• determination of bulk density, rock moisture, porosity and acid-base balance of monolith rocks

• determination of mineralization and host rock physical composition, rock grading and carbonate content

• column leach tests for uranium leachability.

Detailed sampling procedures guide the sampling interval within the mineralization. Where core recoveries are better than 70% and radioactivity is greater than 40 micro-roentgens per hour, core samples are taken at irregular intervals of 0.2 metre to 1.2 metre. Sample intervals also are differentiated by barren or low-permeability material. The average core sample length is 0.4 metre. The sampling is conducted from the half of core divided along its axis and cleared from the clay envelope. Core diameter was 60 mm, 70 mm and 100 mm. The required sample weight was determined based on the length of the samples and the diameters of the core sampled.

The split core is also sampled for grain-size analysis and carbonate content following the same procedure.

Sample preparation and assaying are done by Volkovgeology following procedures set out in SRC guidelines. When core samples are being analyzed for geochemistry, they are primarily analyzed for grain size and assayed for uranium, radium, thorium, potassium and carbonate content. On selected fence lines, a more extensive study of geochemistry is undertaken.

The core samples for uranium and radium determination are taken from representative intervals, based on their quantity and quality. The sampling is conducted in sections from the half of core divided along its axis. The maximum sample length is 1.0 to 1.2 metre, and the minimum is 0.2 metre, with an average of 0.4 metre. To control the sampling quality, a sample is collected from the second half of core. The core samples are ground down to 1.0-millimetre grain size and are further subdivided by one or three times quartering until the

58 2017 INKAI OPERATION TECHNICAL REPORT

final representative weight of samples and duplicates is reached (0.2 kilogram).

11.4 Assaying

The laboratory tests for uranium and radium were performed by the Central Analytical Laboratory (CAL) of Volkovgeology, located in Almaty. The laboratory is certified and licensed by the National Centre for Accreditation of the Republic of Kazakhstan to comply with the STRK ISO/IEC 17025-2007 standard, Certificate number KZ.I.02.1029. Volkovgeology is part owned by Kazatomprom, which is part owner of JV Inkai. The uranium content was determined by using the X-ray fluorescence spectrum analysis. The radium content was determined by the multi-step method using gamma intensity and X-ray spectrum analysis. Since uranium grade calculated from gamma probing of the drillholes is used for resource estimation, assays from core sampling are only used for correlation and radioactive disequilibrium determination purposes.    

11.5 Geophysical logging

Downhole geophysical logging is performed by JV Inkai. JV Inkai owns three geophysical downhole logging trucks, fully equipped for conducting the following types of logging used in exploration/delineation and wellfield drilling programs:

• gamma logging

• resistivity and spontaneous potential

• caliper

• hole deviation

• thermometry

• inductive resistivity.

Gamma and electric logging is conducted in all drillholes over their entire length and is performed with no casing in the drillholes.

AtomGeo, the specialized software developed by a subsidiary of Kazatomprom, is universally used throughout uranium mines and exploration projects in Kazakhstan. It centralizes entry, storage, processing and retrieval of drillhole-related geological information. The raw geophysical data (logs) are entered into the AtomGeo database by JV Inkai staff after conducting a first level QA/QC and checking for errors.

A copy of the database is given to the Volkovgeology data processing centre in Almaty for more rigorous data processing. Correction coefficients are determined considering all factors, including correction for disequilibrium. Thus, calculated and corrected grades are checked against the chemical assays. Then a specifically formatted drillhole file (the passport) is prepared, which is later used in building cross-sections and plans. The plans and section thus prepared will be later used in reserve estimation. Volkovgeology performs this work under a separate contract with JV Inkai.

11.5.1 Radiometric probing

Every drillhole at Inkai is logged for total count gamma radiation, which is used as the primary uranium measurement in resource estimation. Therefore, the quality of the grade calculations is thoroughly controlled. The probes use sodium-iodine crystals which are 30 x 70 millimetres in size and are shielded by lead filters 0.9 to 1.1 millimetres in thickness. The preparation of devices and equipment for operation, methods and techniques of logging are kept in strict compliance with the requirements from the instruction manuals on operation and gamma-logging. The readings are measured in micro-roentgen per hour and are taken at 10-centimetre intervals down the length of the drillhole.

The source materials for logging calibration are considered to be of good quality and are used to test the probing equipment both prior to and after logging. The variation in gamma logging estimates, based on basic control and check logging, does not exceed +/- 5% grade-thickness, and the variation in recording electrical logging parameters does not exceed +/- 7%.

The data from the gamma logging is processed and interpreted using the AtomGeo software, which uses an algorithm of differential interpretation (deconvolution), as recommended by the SRC logging instruction

59 2017 INKAI OPERATION TECHNICAL REPORT

manual. During the interpretation, adjustments are made for absorption of gamma radiation by mud and for moisture within the mineralization. The first adjustment is made based on the value of the nominal diameter for the drilled mineralized intervals because the adjustment by an actual well diameter, established by caliper logging, differs from it by less than 2%. A 15% adjustment for humidity is applied on the basis of numerous measurements. In addition, adjustments for radioactive equilibrium and radon release are made manually on the diagrams of differential interpretation.

Further comparisons have been made between gamma logging data and neutron logging data to confirm the absence of systematic errors. Prompt fission neutron logging was performed for a number of drillholes as a direct method for logging uranium and to check comparisons with gamma log determinations of the uranium grade.

11.5.2 Caliper logging

Caliper logging is performed over the entire length of a drillhole in approximately 10% of the drillholes. Calipers are calibrated before and after each logging run by using reference rings. When comparing the results of the calliper logging to the corresponding nominal diameters of the drillhole intervals, the difference was insignificant and the standard deviations did not exceed the allowable values indicated by the instruction manual. On this basis, it was concluded that for the calculation of the gamma-ray absorption coefficient, the nominal diameter of drillholes could be used.

11.5.3 Hole deviations

Directional surveys are carried out on every drillhole at Inkai to determine the actual position of the well in three-dimensional space. This is carried out by measuring the zenith and azimuth angles for the deviation of the well from vertical. Measurements are made every 20 metres down the length of the drillhole. During the deviation survey, every fifth point is re-measured as a check measurement. These check measurements are conducted two to three metres above the original key point. Similar check measurements are conducted in cases where serious changes to the zenith angle occur when compared to the previous point. The drift indicator is calibrated at least once per month.

11.5.4 Resistivity and self-polarization

These methods are used on all holes to identify the lithologies and stratigraphic features, and to assess the permeability of the rocks in place.

11.6 Density determinations

Density determinations are typically made on 100 to 150 samples per mineralized horizon, and are analyzed by using bulk density methods. The density of the mineralized material is regarded as constant at 1.70 tonnes per metre cubed.

11.7 Quality assurance / quality control

The sampling reproducibility for the uranium and radium assays was determined by two methods: (1) having the remaining half of the core sampled by another sampler and by (2) by compositing samples consisting of the original sample rejects and samples of the remaining half of the core. The standard deviation for (1) did not exceed 6.4% and the standard deviation for (2) did not exceed 5.6%.    

In order to ensure the assay accuracy and adequacy for the purposes of correlation with gamma probing and disequilibrium determination for resource estimation, the following control analyses were carried out:

• internal laboratory control of the uranium and the radium grade determination is performed by comparing the results of the sample and its blind duplicate. The mean square error between sample and duplicate was calculated by measuring the deviation to ensure it stayed within the prescribed limits. The number of control samples was approximately 9% of all samples for uranium and approximately 6% of all samples for radium.

60 2017 INKAI OPERATION TECHNICAL REPORT

• internal inter-method control of assays for uranium and radium were performed in the form of checks between the results of the X-ray fluorescence analysis for uranium against the results of wet chemical analyses conducted by CAL. The results of radium determination were checked against the results of radiochemical analyses also conducted by CAL. The number of control samples was approximately 4% of all samples for uranium and approximately 2% of all samples for radium.

• external (inter-laboratory) controls for the uranium and radium assays were carried out at the VIMS laboratory in Moscow, Russia, Nevskoe PGO laboratory in Saint-Petersburg, Russia and Kyzyltepageologiya Laboratory in Navoi, Uzbekistan. The number of control samples was approximately 2% of all samples for uranium and approximately 1% of all samples for radium.

Based on numerous QA/QC controls applied by Volkovgeology, including internal checks and inter-laboratory checks, the repeatability of the results for uranium and radium confirmed the accuracy specified and no significant systematic deviations were found.

All drilling, logging, core drilling, and subsequent core splitting and assaying, were completed under the direction of various geological expeditions of the USSR Ministry of Geology and later under the supervision of Volkovgeology. Sampling and analysis procedures have been examined by Cameco and an independent consultant and found to be detailed and thorough.

11.8 Adequacy of sample preparation, assaying, QA/QC and security

With respect to historic Kazakh exploration on Blocks 1, 2 and 3, Cameco has been unable to locate the documentation on sample security at this time. However, based upon the rigorous QA/QC used in other areas of sampling, and on strict regulations imposed by the Kazakhstan government, Cameco believes that the security measures taken to store and ship samples were of the highest quality.

The QP responsible for this section has witnessed core handling, logging and sampling at Inkai, considers that the methodologies are satisfactory and the results representative and reliable. The QP is satisfied with all aspects of probing, sample preparation, assaying, QA/QC and security for samples resulting from drilling by JV Inkai and believes that the security measures taken to handle, store and ship samples are acceptable.

61 2017 INKAI OPERATION TECHNICAL REPORT

12 Data verification

12.1 Blocks 1 and 2

The data relevant to Block 1 of the Inkai deposit, as well as some of the data relevant to Block 2, have been used to produce the “Report of the Expedition No. 7 on the First Stage of the Detailed Exploration-Delineation of the Inkai Uranium Deposit for the Period 1979–1991”, issued by Volkovgeology in 1991.

That report consists of three volumes in Russian:

• Volume I: Geology of the Orebody, comprising 11 books and two binders of plan views and sections

• Volume II: Estimate of the Reserves, comprising 11 books and 11 binders of plan views and sections

• Volume III: Results of a Leach Test on Property 1, comprising three books and one binder of drawings.

In July and August of 2002, Cameco obtained access to the detailed drillhole data which consisted of:

• list of radioactivities for all anomalous zones (with their conversion into radium concentration for 159 drillholes)

• geophysical graphs (radioactivity, resistivity, self-potential)

• assay results (radium and uranium) from individual drillhole log and from binders 186 and 187

• list of filtration coefficients in the anomalous zones.

Drawings from the report were also sent to Cameco after JV Inkai obtained the necessary export authorizations.

The following information was digitized from reports, sections and maps, and validated by Cameco with available Volkovgeology reports:

• lists of mineralized intervals used in the 1991 estimate by Volkovgeology

• tables of calculations and lists of filtration coefficients that could be found in books two to 10 of Volume II of the RDP-7

• radioactive listings (and calculated radium concentrations) for 159 drillholes only

• drillhole collar co-ordinates and deviations

• lithology, oxidation level and filtration coefficients.

The available information as of March 2003 was more than sufficient to allow for a comprehensive data verification, and for validating the historic Kazakh mineral resource and reserve estimate.

Part of the assay results has also been processed by Cameco to validate the uranium grade calculations by Volkovgeology. All of the 1,294 drillholes shown on the Volkovgeology cross-sections were studied and coded.

All of the drillhole core that could be recovered (and according to the drill logs, this recovery was good) was sampled and assayed for uranium and radium content. The location of each sample and the assay results were recorded in the drillhole log, referred to as a passport.

Subsequently, in 2007, Volkovgeology issued two reports for Block 2:

• “Technical and Economic Substantiation of Permanent Conditions for Block 2 of the Inkai Uranium Deposit”, consisting of five books and five binders of plan views and cross-sections

• “Report on the Results of Exploration and Delineation at Block 2 of the Inkai Uranium Deposit over the Period from 1991 to 2006”, consisting of the following two volumes:

• “Volume I: Geology of the Orebody”, comprising five books and five binders

62 2017 INKAI OPERATION TECHNICAL REPORT

• “Volume II: Estimate of the Reserves”, comprising one book and five binders.

Based on the observations from the amount of data verification, resource validation and mining experience in Block 1, Cameco’s data validation for Block 2 was less extensive than the one it did on Block 1. The validation done covered drillhole location and uranium grade calculations for mineralized intervals,

12.1.1 Radioactivity, radium and uranium grades

Each historic drillhole has been entirely gamma probed, and the graphs (originals and copy on passport) were found in the individual drillhole files. In the anomalous zones and their vicinity, the graphs were digitized and computerized. The result was a list of radioactivity measures in micro-roentgen per hour at 10-centimetre spacing. All drillholes drilled by JV Inkai were probed by its geophysical crews. The gamma data was recorded in digital form by the logging equipment, with radioactivity measurement in micro-roentgen per hour every 10 centimetres, and stored in the AtomGeo database.

As a correlation has been established between radioactivity and radium content, it is possible to convert this radioactivity into radium grade. The process used by Volkovgeology is performed by means of AtomGeo, a proprietary program developed by Volkovgeology. This program takes into account the characteristics of the drillhole (diameter, fluid density and casing), the characteristics of the surrounding ground (density) and the characteristics of each individual probe.

The relationship between radioactive readings and calculated radium grades obtained from the use of the method was studied in detail by Cameco. There is a very good relationship between radioactivity and radium grade in most locations. Arithmetic and logarithmic plots between the two variables give a gradient of 1.086, suggesting the possibility of overestimating radium content in the high radioactivity zones.

The conversion of radium grade into uranium grade is dependent on the radium-uranium equilibrium. A disequilibrium factor related to the interpreted location of the mineralized intervals in the roll-front is applied.

Correlation on grade-thickness from radioactivity and from uranium grade was reviewed and found to be excellent. The data validation work done by Cameco showed that the grade and grade-thickness used by Volkovgeology are considered quite reliable.

12.2 Block 3

Block 3 datasets, including the drillhole database and geological interpretations, were provided to Cameco and are currently being reviewed by Cameco. So far, Cameco has validated for consistency the drillhole information in the dataset with maps, cross-sections and calculation tables received from JV Inkai. The few inconsistencies noted were reported to JV Inkai. The Block 3 datasets were previously validated by Volkovgeology, JV Inkai, and SRC. Cameco has not reviewed their validation results.    

12.3 Opinion on adequacy of data

The QPs for this section are satisfied with the quality of data and consider it valid for use in the estimation of mineral resources and mineral reserves for Blocks 1 and 2. Comparison of the actual mine production with the expected production from the mine plan supports this opinion.

All of the drillhole information in use at Inkai is regularly provided to Cameco. The current database for Block 1 and Block 2 has been thoroughly validated a number of times by geologists with JV Inkai, Volkovgeology, the SRC and Cameco (including the QPs responsible for this section) and is considered relevant and reliable. This is supported again by the uranium production from Blocks 1 and 2.

63 2017 INKAI OPERATION TECHNICAL REPORT

13 Mineral processing and metallurgical testing

The ISR mining method applied at Inkai uses sulphuric acid as the lixiviant. The resulting uranium rich pregnant solution is processed at surface plants which produces uranium peroxide yellowcake. At Inkai, the pregnant solution from the Block 1 wellfield reports to the main processing plant (MPP), the pregnant solution from the Block 2 wellfield reports to Satellite 1 processing plant (Sat1), and the pregnant solution from Block 3 reports to TLF processing plant.

Field test work at the Inkai site started in the late 1970s. By the end of the 1990s, all main process parameters for the Inkai deposit had been determined. Block 1 has been in commercial production since 2009. Block 2 started commercial production in 2010. Since Block 1/MPP and Block 2/Sat1 are in commercial production, a discussion of metallurgical test results has not been included. A testing campaign is currently being conducted to assess Block 3.

Production details for Block 1 and 2 are found in Section 16 Mining methods. A description of the process recovery methods in the MPP, Sat1, and TLF processing plants are provided in Section 17 Recovery methods. Uranium recovery in the MPP and Sat1 surface operations and the metallurgical test results relating to Block 3 are discussed in this section.

13.1 Main Processing Plant and Satellite 1

The overall surface process recovery for the MPP and Sat1 operations was 98% in 2016. It is expected to remain at this level for the current life of mine plan. Although this recovery level is relatively high, future recovery levels and equipment capacity could be affected by the accumulation of specific species such as nitrate, chloride, ferrous and ferric ions accumulating in production ponds. To the extent known, these species do not currently affect the overall uranium recovery and capacity of the surface equipment. In the future, the accumulation of these species may occur as a result of longer duration of operation and higher production levels. It is recommended that the concentration of species which have the potential to impact equipment performance be monitored.

13.2 Block 3 and Test Leach Facility

The main objective of the Block 3/TLF test program is to determine whether the operational experience gained in Block 1/MPP and/or Block2/Sat1 is directly applicable to Block 3/TLF or if there are differences which require changes in the approach to its development. Based on the results of exploration at Block 3, the Volkovgeology 2015 report indicates that geology of the middle Inkuduk region of the Block 3 deposit is almost identical to the adjacent Block 2 geology including geological and hydrogeological characteristics, orebody morphology, and mineralogical and material composition of uranium mineralization and enclosing rocks. Most of the uranium identified in Block 3 exists in the middle Inkuduk region.

Standardized column tests were conducted with three composite samples from Block 3 as described in the 2011 Volkovgeology report, “Laboratory Studies of Technological Parameters of the Ore Deposit Inkai”. The composite samples selected for preliminary test work are not necessarily representative of the entire deposit at Block 3. Analysis of the composite samples was conducted according to Kazakhstan regulations.

Table 13-1 below provides the content of key species in the composite samples as determined in the study, (Volkovgeology, 2011).

64 2017 INKAI OPERATION TECHNICAL REPORT

TABLE 13-1: Key species in the Block 3 Composite Samples

Species	Range (wt%)	Species	Range (wt%)
U	0.05 to 0.08	S	< 0.10 to 0.10
Ra	0.04 to 0.07	CO2	<0.10 to 0.67
Fe	0.74 to 1.50	Se	0.0004 to 0.0008

Two column leach tests were performed with each of the composite samples. Three pore volumes of water were applied in the water-wash stage. In the acidification stage, between one to four pore volumes of lixiviant were used. In this stage, the sulphuric acid concentration was maintained at a specific level for each test. The acid concentrations were varied between 5 to 20 grams per litre. Recoveries approaching 85% were achieved with all samples and in some cases, recoveries greater than 90% were attained. The average uranium tenor of the resulting pregnant solution for a given experiment varied between 100 to 600 milligrams per litre and acid consumption varied between 15 to 105 kilograms acid per kilogram uranium.

As discussed in Section 7.3.4 Mineralogy, all potential contaminants in the deposit such as molybdenum, selenium, and vanadium occur at background levels consistent with the average values for the Earth’s crustal rocks. The effect of calcium, magnesium and aluminum precipitates on permeability was also studied (2011). It was determined that any reduction in permeability caused by the associated salts could be addressed by increasing the lixiviant acid strength.

Based on the success of the column leach tests, a wellfield test program at Block 3 has been initiated in 2015 and is underway.    

The TLF is an IX plant at Block 3 built to process the Block 3 pregnant solutions. TLF has IX equipment similar to Sat1 and can perform IX loading and elution. The details of the process plants are presented in Section 17 Recovery methods.

65 2017 INKAI OPERATION TECHNICAL REPORT

14 Mineral resource estimates

The estimated mineral resources at Inkai are located in Block 1 and Block 2. The preparation of the resource models followed the SRC guidelines. They were prepared by Volkovgeology using the GT estimation method on two-dimensional blocks in plan view. They were approved by SRC in 1993, for Block 1, and in 2007, for Block 2. Inkai’s mineral resource estimates have been reviewed and accepted by Cameco. Cameco performed a re-interpretation and re-estimation of Block 1 in 2003, and confirmed the estimated pounds of uranium to within 2.5% of the Kazakh estimate. Independent verifications of the mineral resources estimates were performed in 2005 on Block 1 and in 2007 on Block 2 and the results were consistent with the Kazakh resource estimates.

A revision of the alignment of the historical Kazakh mineral resources classification system with the CIM Definition Standards was done by Cameco in 2016.

The classification of mineral resources and their subcategories conforms to the definitions adopted by the CIM Council on May 10, 2014, which are incorporated by reference in NI 43-101. Cameco reports mineral reserves and mineral resources separately. The amount of reported mineral resources does not include those amounts identified as mineral reserves. Mineral resources that are not mineral reserves have no demonstrated economic viability and do not meet the requirements for all relevant modifying factors. Stated mineral resources are derived from estimated quantities of mineralized material recoverable by ISR methods. Inkai’s mineral resources do not include allowances for dilution and wellfield uranium recovery.    

14.1 Key assumptions, parameters and methods

Guidelines

The methodology of delineation programs and all related procedures for geological, geophysical, analytical work and resource classification follows the recommendation of the SRC guidelines for exploration and delineation of uranium deposits (GKZ, 1986). The guideline first was developed by the State Reserve Commission of the USSR. It was followed by the guideline issued in 2008 by the SRC of Kazakhstan, specifically developed for the roll-front (sandstone) uranium deposits in Kazakhstan (SRC, 2008).

The SRC guidelines outline the main requirements and standards for exploration/delineation and related work, including:

• deposits classification into geological types and complexity categories

• stages of exploration and delineation work

• recommendations for drilling pattern geometry and densities, depending on the stage, complexity and the category of reserves to be defined

• a regular pattern is necessitated by the polygonal plan method of reserve estimation

• requirements for geological logging of the core

• requirements for geophysical downhole logging

• requirements for the content and standards of analytical work

• reserve estimation procedures and requirements for data used.

The requirements for geophysical logging, data processing, analytical work, and topographic work must follow corresponding subordinate guidelines specifying the standards for equipment performance, QA/QC protocols and other similar items.

The SRC guidelines represent a significantly more detailed and prescriptive set of requirements in comparison to NI 43-101, the CIM Definition Standards and the CIM “Estimation of Mineral Resources and Mineral

66 2017 INKAI OPERATION TECHNICAL REPORT

reserves – Best Practice Guidelines”.

The Kazakhstan Association for Public Reporting of Exploration Results, Mineral Resource and Mineral Reserves (KAZRC) developed the KAZRC Code in June 2016 following the CRIRSCO template. KAZRC contains a checklist outlining the recommended additional criteria for estimation and reporting of uranium for in-situ leaching. The checklist is consistent with the requirements of the SRC guidelines, although represents a much higher level summary.

Technical studies

The regulations in Kazakhstan require that definitive mineral resource estimation reports submitted to the SRC be based on approved set of parameters. The selection of the parameters must be substantiated in a study known as TEO of Permanent Conditions (TEO), from the Russian abbreviations for Technical and Economic Substantiation. A TEO must be submitted and approved by the SRC. The following two documents provide a useful reference for the nature, the scope and the meaning of the TEO studies:

• “The Guidelines On Alignment Of Russian Minerals Reporting Standards And The CRIRSCO Template” (FGU GKZ and CRIRSCO, 2010)

• “The Guidelines On Alignment Of Minerals Reporting Standards Of The Republic Of Kazakhstan And The CRIRSCO Template” (KAZRC, 2016).

A TEO is defined as follows: “The TEO of Permanent Conditions is prepared according to the results of completed exploration work. Its purpose is to establish the scale and commercial value of a deposit, to define the economic value of its development, and to aid decision-making on financial investments in mining development of the deposit. Thus all financial estimates on the accepted option for commercial development of the deposit are carried out within the framework of realistically assumed values of all the modifying factors. The overall reliability of the completed study must be characterised.”

The TEO studies are required to include a mining plan and be based on technical and economic parameters relevant to the deposit studied as well as cost estimates for CAPEX and OPEX and commodity price forecast relevant for the time of the studies and the mine planning horizon.

The guidelines state that TEO studies are thus broadly similar to Preliminary Feasibility Study or a Feasibility Study defined in the International Reporting Template, published by the Committee for Mineral Reserves International Reporting Standards (CRIRSCO). The TEO studies provide a set of parameters allowing distinguishing parts of mineralization that can be profitably extracted (the so-called “Balance” part) from parts which cannot be profitably extracted (the so-called “Off-Balance” part) at the time of estimation in accordance with technical-economic calculations carried out in a TEO study. Cameco only uses the “Balance” part of mineralization for defining Inkai’s mineral resources and the basis for mineral reserves.

Once approved, the TEO studies provide a set of parameters to be used in preparation of a resource estimation report. A resource estimation report contains detailed data and results for the geological, hydrogeological, geotechnical, including laboratory and field ISR test delineation, analytical, geophysical studies, description of the methodology for delineation and resource estimation, as well as resource estimation itself.

TEO studies were completed and approved by SRC for Block 1 in 1991 and for Block 2 in 2007. They were based on the results of exploration-delineation drilling programs and accompanying studies of hydrogeological and technological characteristics, including laboratory column leach and field ISR tests. The resource estimation reports were reviewed by Cameco as described in Section 12 Data verification. TEO studies were reviewed by Cameco and used in studies it did to validate the project economics and to contemplate increasing production levels.

To define the mineral resources in 2007, average forecast price of $32.80 (US) per pound of U₃O₈ was used along with production costs of $11.20 (US) per pound of U₃O₈. As mineral reserves are currently based on $51 (US) per pound with production costs of $9.80 (US) (See Section 21.2 Operating cost estimates), the expectation for eventual economic extraction of the mineral resources is reasonable. It is also supported by

67 2017 INKAI OPERATION TECHNICAL REPORT

studies of hydrogeological and technological characteristics of the mineralization. The amenability to ISR mining is determined by laboratory leach tests, field ISR tests and further supported by the results of commercial operation since 2009.

14.1.1 Key assumptions

• mineral resources were estimated based on the use of the ISR extraction method and yellowcake production

• in 2007, average forecast price of $32.80 (US) per pound U₃O₈ was used to estimate the mineral resources cut-off, along with production costs of $11.20 (US) per pound U₃O₈ and 85% metallurgical recovery. These are still valid today to define the mineral resources, and reasonable given the proximity of surface and mining infrastructure on the site

14.1.2 Key parameters

• Block 1 mineral resources estimates are based on 991 surface drillholes

• Block 2 mineral resources and reserves estimates are based upon 1,441 drillholes

• grades (% U₃O₈) were obtained from gamma radiometric probing of drillholes, checked against assay results and prompt-fission neutron logging results to account for disequilibrium

• average density of 1.70 tonnes per cubic metre was used, based on historical and current sample measurements

Additional key parameters, including cut-offs are listed in Table 14-1.

14.1.3 Key methods

• geological interpretation of the orebody outlines was done on section and plan views derived from surface drillhole information

• a resource block must be confined to one aquifer taking into consideration the distribution of local aquitards.

• mineral resources were estimated with the GT method, where the estimated variable is the uranium grade multiplied by the thickness of the interval, and using two-dimensional block models

• geological modelling and mining applications used were AtomGeo, MapInfo and Maptek Vulcan.

68 2017 INKAI OPERATION TECHNICAL REPORT

TABLE 14-1 : CUT-OFFS AND ADDITIONAL ESTIMATION PARAMETERS

Parameter	Value
Minimum grade to define the mineralized intervals	0.012% U3O8
Minimum GT cut-off per hole per productive horizon to define the limits of estimation block
•    Block 1	0.071 m% U3O8
•    Block 2	0.047 m% U3O8
Minimum GT cut-off for an estimated block	0.130 m% U3O8
Maximum thickness of barren intervals to be included
•    per hole	1 m
•    per C1 category block	6 m
•    per C2 category block	No limit
Minimum percent of above cut-off holes per estimated block	75%
Minimum size of a standalone estimated block	40,000 m2
Maximum size of estimated block	300,000 m2
Content of silt-clay of size < 0.05 mm in mineralized intervals	< 30%
Carbonate content per estimation block, CO2 equivalent	< 2%
Minimum hydraulic conductivity	1.0 m per day

14.1.4 Resource classification

In Kazakhstan mineral resources and reserves are classified according to the 1981 “System of Classification of Reserves and Resources of Mineral Deposits” (GKZ). The SRC uses the GKZ system.

The categories are denoted in the order of decreasing geological confidence as A, B, C1, C2, and P1. The KAZRC Code provides a useful frame of reference in converting the resource categories of the GKZ system to other national systems, including the CIM system. However, the limitation of this frame of reference should not be understated, and caution should be exercised in not applying the proposed conversion mapping automatically, without taking into consideration all relevant geological, technical and economic factors.

Historic drilling pattern densities were sufficient to satisfy the SRC requirements in defining resources in the C2, C1 and B categories within Block 1 and C2 and C1 categories within Block 2. In 2016, Cameco revised the criteria it used to align the GKZ classification system with the CIM Definition Standards and KAZRC Code. Blocks 1 and 2 mineral resources have been classified on the basis of sampling density, interpretation of geological continuity and grade continuity and content of non-mineralized material between mineralized intervals. Where previously the Kazakh categories C2 and C1 were directly reconciled to Inferred and Indicated mineral resources respectively, now C2 can be in the Inferred and Indicated categories and C1 in the Indicated and Measured categories. Figure 14-1 shows a plan view of the total mineral resources, inclusive of reserves, reconciled to the CIM categories.

69 2017 INKAI OPERATION TECHNICAL REPORT

Staying aligned with the CIM Definition Standards for the mineral resources categories, the following additional specific classification criteria for each resource category are applied:

Measured mineral resources: Drilling density equivalent to or denser than a 200 x 50-metre grid spacing (or 1 drillhole per hectare) for mineralization zones characterized by a uniform and easily correlatable morphology, from one fence line to another. The barren volume included into the resource block does not exceed 40%. Mineralization must be continuous between fences. If a resource block is defined by three fence lines, it more than one mineralized drillhole must occur on delimiting fence. The hydrogeological properties of the hosting productive horizon is studied by aquifer pump tests. Sampling for grain size and carbonate content of the mineralization is available from core drilling on at least 400 x 50-metre grid density. The amenability of mineralization to ISR mining is demonstrated by laboratory and field ISR leach tests or mining operation results. Mineralization is characterized by sufficient confidence in geological interpretation to support detailed wellfield planning and development with no or very little changes expected to result from additional drilling.

Indicated mineral resources: Drilling density is sparser than 200 x 50-metre, but denser than 400 to 600 x 50 to 100-metre for mineralization zones characterized by relatively uniform structure and correlatable morphology. In some areas, resource blocks may be drilled on 200 by 50 metres spacing but not meet the additional criteria for Measured resources due to continuity, uniformity and confidence in geological interpretation. The hydrogeological properties of the hosting productive horizon is studied by aquifer pump tests. Sampling for grain size and carbonate content of the mineralization is available from core drilling on at least 400 by 100-metre grid density. The amenability of mineralization to ISR mining is demonstrated by laboratory and field ISR leach tests or mining operation. Mineralization zones are characterized by sufficient confidence in geological interpretation to support wellfield planning and development albeit with some changes expected to result from additional drilling.

Inferred mineral resources: Drilling grid defining mineralization is sparser than 400 to 600 x 50 to 100-metre, but denser than 800 x100-metre. Resource blocks defined in the areas drilled with denser than 400 to 600 x 50 to 100-metre but not meeting the additional criteria for higher categories for continuity, uniformity and confidence in geological interpretation. The hydrogeological properties of the hosting productive horizon is studied by aquifer pump tests. Sampling for grain size and carbonate content of the mineralization is available from core drilling on at least 800 x 200-metre grid density. The amenability of mineralization to ISR mining must be demonstrated by at least laboratory leach tests. Mineralization zones are characterized by insufficient confidence in geological interpretation to support wellfield planning and development due to significant changes expected from additional drilling.

70 2017 INKAI OPERATION TECHNICAL REPORT

FIGURE 14-1: BLOCKS 1 AND 2 - TOTAL MINERAL RESOURCES BY CIM CLASSIFICATION

N Block 3 TLF Satellite-1 MPP 0 12 4 Kilometers CIM Resource Land tenure Drilling Classification Block 1 Mining allotment x ISR tests • Block 3 2006-2009 Measured Block 2 Mining allotment * Hydrogeological wells Block 32010 indicated Blocks 2&3 Exploration allotment Delineation 2013-2016 • Block 3 2011 Inferred Processing Facilities Historic 1978-1991 Block 3 2012 Cameco Processing Facilities Block 3 2013

71 2017 INKAI OPERATION TECHNICAL REPORT

14.1.5 Mineral resource estimate

A summary of the estimated mineral resources for Inkai with an effective date of December 31, 2016 is shown in Table 14-3. Cameco’s share of uranium in the mineral resources table below is based on its interest in potential production (57.5%), which differs from its ownership interest (60%) in JV Inkai.

TABLE 14-2: SUMMARY OF MINERAL RESOURCES – DECEMBER 31, 2016

			Total tonnes (x 1,000)		Grade %  U3O8		Total M Lbs  U3O8		Cameco’s share M Lbs U3O8
Category	Area
MEASURED		Block 1		24,650		0.076		41.5		23.8
		Block 2		10,205		0.061		13.8		8.0
Total Measured				34,855		0.072		55.3		31.8
INDICATED		Block 1		15,561		0.069		23.7		13.6
		Block 2		62,354		0.045		62.3		35.9
Total Indicated				77,915		0.050		86.0		49.5
Total Measured and Indicated				112,770		0.057		141.3		81.3
INFERRED		Block 1		2,038		0.062		2.8		1.6
		Block 2		149,546		0.045		147.1		84.6
Total Inferred				151,583		0.045		149.9		86.2

Notes:	(1)    Reported mineral resources do not include amounts identified as mineral reserves. Totals may not add up due to rounding.
	(2)    Cameco’s share is 57.5% of total mineral resources.
	(3)    Inferred mineral resources are estimated on the basis of limited geological evidence and sampling, sufficient to imply but not verify geological grade and continuity. They have a lower level of confidence than that applied to an Indicated mineral resource and cannot be directly converted to a mineral reserve.
	(4)    Mineral resources have been estimated at a minimum grade-thickness cut-off per hole of 0.071 & 0.047 m%U3O8 for Blocks 1 and 2, respectively, and at a minimum grade-thickness cut-off per block of 0.130 m% U3O8.
	(5)    The geological model used for Inkai involves geological interpretations on section and plan derived from surface drillhole information.
	(6)    Mineral resources have been estimated on the assumption of using the ISR extraction method.
	(7)    Mineral resources have been estimated with the grade-thickness method using 2-dimensional block models.
	(8)    There are no known environmental, permitting, legal, title, taxation, socio-economic, political, marketing or other relevant factors that could materially affect the above estimate of mineral resources other than changes resulting from closing of the Implementation Agreement.
	(9)    Mineral resources that are not mineral reserves have no demonstrated economic viability and do not meet all relevant modifying factors.

72 2017 INKAI OPERATION TECHNICAL REPORT

14.1.6 Changes to mineral resources

The differences in Cameco’s share of the pounds between the 2016 and the 2015 year-end mineral resource estimates show increases of 31.8 million pounds in Measured and 19.2 million pounds in Indicated resources and a decrease of 58.1 million pounds in Inferred resources. The changes are mainly due to:

• revised mineral resources classification with most of C1 and C2 categories, which are not included in the mine plan, now equivalent to Measured and Indicated, respectively

• the production plan now assumes production of 5.4 million pounds of U₃O₈ for 2017, then 5.2 million pounds per year for 2018 to 2028 and then decreasing till 2030, with more Indicated resources available for conversion to mineral reserves than previously.

The mineral resource classification is based on the criteria laid out in Section 14.2.4 Resource classification. A summary of the changes in mineral resources is shown in Table 14-3.

TABLE 14-3: CHANGES IN MINERAL RESOURCES

	Year-end 2015						Year-end 2016						Changes
Category	Total tonnes (x 1,000)		Grade % U3O8		Total M Lbs U3O8		Total tonnes (x 1,000)		Grade % U3O8		Total M Lbs U3O8		Total M Lbs U3O8		Cameco’s share M Lbs  U3O8
Measured		—		—		—		34,855		0.072		55.3		+ 55.3		+ 31.8
Indicated		31,366		0.076		52.6		77,915		0.050		86.0		+ 33.4		+ 19.2
Inferred		250,959		0.045		251.0		151,583		0.045		149.9		- 101.1		- 58.1

Notes:	(1)	Cameco reports mineral reserves and mineral resources separately. Reported mineral resources do not include amounts identified as mineral reserves. Totals may not add up due to rounding.
	(2)	Cameco’s share is 57.5% of total mineral resources.
	(3)	Inferred mineral resources are estimated on the basis of limited geological evidence and sampling, sufficient to imply but not verify geological and grade continuity. They have a lower level of confidence than that applied to an Indicated mineral resource and cannot be directly converted to a mineral reserve.

14.2 Factors that could materially affect the mineral resource estimate

The QP responsible for Inkai mineral resource estimate is satisfied with the high quality of data and considers the data valid for use in the estimation of mineral resources. This is supported by the results of the leach tests done on Blocks 1 and 2, and commercial production results from Blocks 1 and 2 since 2009.

As is the case for most mining projects, the extent to which the estimate of mineral resources may be affected by environmental, permitting, legal, title, taxation, socio-economic, political, marketing or other relevant factors could vary from material gains to material losses. The QP responsible for the mineral resource estimate is not aware of any relevant factors that could materially affect Inkai’s mineral resource estimate other than changes resulting from closing of the Implementation Agreement (see Section 24.3 2016 Implementation Agreement).

73 2017 INKAI OPERATION TECHNICAL REPORT

15 Mineral reserve estimates

15.1 Definitions

The classification of mineral reserves and their subcategories conforms to the CIM Definition Standards. Cameco reports mineral reserves and mineral resources separately. The reference point at which Inkai’s mineral reserves are defined is the point where the mineralization occurs under the existing or planned wellfield pattern.

Stated mineral reserves are derived from estimated quantities of mineral resources economically recoverable by ISR and satisfying all modifying factors. Inkai’s mineral reserves do not include allowances for dilution and wellfield uranium recovery. The wellfield uranium recovery is part of the reported metallurgical recovery. Mineral reserves have demonstrated economic viability. Only Block 1 and Block 2 Indicated and Measured mineral resources are considered for conversion to mineral reserves. Inkai’s mineral reserves estimate has been updated with the life-of-mine plan provided by JV Inkai and reviewed by Cameco.

Recovery

In the ISR process some quantity of mineralization cannot be extracted from the ground due to a number of geological, mining as well as metallurgical factors. These include, for example, the formation of stagnant zones, reduced permeability due to plugging up pore spaces, re-precipitation of some uranium in the leach zones, screen location in relation to complex mineralization morphology and hydrogeological settings or unfavorable host rock composition, return of residual uranium remaining in the lixiviant to wellfields after extraction at the processing facilities. In practice it is difficult or impossible to accurately establish the share of each of the above contributors to the total loss pertinent to the in-situ leaching process. The total loss can nevertheless be established based on the results of laboratory leach tests, field ISR tests and commercial ISR operation which all provide the basis for expected wellfield recovery. The recovery obtained from the in-situ leaching process is therefore included in the metallurgical recovery.

Dilution

Dilution occurs in ISR, as the lixiviant cannot be precisely confined to the limits of mineralized volume of rock, but is rather controlled by hydrostratigraphic architecture of the productive horizons, placement of screens and the balance between injector and producer wells. Dilution results in additional volume of rock mass that has to be acidified and leached relative to the mineralized rock volume. Dilution is accounted for by using permeable thickness and corresponding screen lengths at the mine planning step to provide the effective volume of rock that is subject to acidification and leaching. It is this effective volume that is used for the wellfield uranium recovery curves and computation of production forecasts. Dilution affects a volume and not a tonnage.

15.2 Key assumptions, parameters and method

15.2.1 Modifying factors

In order to convert mineral resource to mineral reserve the requirements of all modifying factors have to be satisfied. The key assumptions, parameters and methods used for mineral reserve definition are based on the application of relevant modifying factors.

Geological, hydrogeological, mining, metallurgical, technical and economic factors. As discussed in Section 14 Mineral resource estimates, the assumptions, parameters and methods used for the definition of mineral resource account for geological, hydrogeological, mining, metallurgical, technical and economic factors pertinent to the project. It is supported by the results of commercial production since 2009. The same parameters and assumptions were used in the mining project for the life of the mine required in Kazakhstan as described in Section 4.5.5 Work programs and project documentation. The technical and economic studies carried out and presented in the TEO reports were based on reasonable assumptions for the production costs and uranium price forecast which remain relevant for this technical report. The QPs responsible for mineral reserve estimates are of the opinion that these geological, hydrogeological, mining,

74 2017 INKAI OPERATION TECHNICAL REPORT

metallurgical, technical and economic factors are relevant and satisfy the requirements for the corresponding modifying factors that are applied in converting mineral resource to mineral reserve.

Processing factor. The processing facilities capable of processing the flow of pregnant lixiviants from the wellfields in the terms of its volume and head grade and chemistry. The capacities of the processing facilities, as described in the Sections 13 Mineral processing and metallurgical testing and Section 17 Recovery methods meet the requirements of processing the flow of pregnant lixiviants with volumes and head grades as described in the Section 16.1.4 Wellfield production.

Infrastructure factor. The infrastructure necessary to support the wellfield development, transportation of materials, electric power requirements, personnel accommodations for the operation of processing facilities, wellfields. The infrastructure, as described in Section 18 Project infrastructure, is adequate to support the planned production.

Legal and governmental factor. Inkai has sufficient security of tenure for the mineral rights provided by the Resource Use Contract and access to the surface area as described in the following Sections: 4.2, 4.3, 4.4 and 4.5. Approved mining project and a work program are required under the regulations in Kazakhstan, as described in Section 4.5.5 Work programs and project documentation. The production plan assumed in this technical report as presented in Table 16-1 Production schedule and Figure 16-4 is based on approved mining project and work program.

15.2.2 Key assumptions

• average metallurgical recovery of 85%, which is based on the production results so far, as presented in the Section 16.1.4 Wellfield production

• average uranium price of $51 (US) per pound U₃O₈, derived from the production schedule and annual forecast realized prices, with exchange rates of $1.00 US=$1.20 to $1.25 Cdn and 245 Kazakhstan Tenge to $1.00 Cdn.

15.2.3 Key parameters

• the production rate is planned for 5.4 million pounds of U₃O₈ for 2017, then 5.2 million pounds per year for 2018 to 2028 and then decreasing till 2030.

• average estimated operating costs of $12.71 per pound

• mineral reserves have been estimated at a minimum grade-thickness of 0.130 m% U₃O₈

• Mineral reserves represent the in-situ ore that can be extracted within the term of the Block 1 and Block 2 licenses.

15.2.4 Key methods

• only Indicated and Measured mineral resources are considered for conversion to mineral reserves

• preparation of a feasible mining plan with required infrastructure

• considerations of the rate of wellfield uranium recovery, lixiviant uranium head grades, wellfield flow rates and production requirements to define the production sequence

• geological and mining applications used were AtomGeo, MapInfo and Maptek Vulcan.

15.2.5 Reserve classification

Mineral reserves have been classified in accordance with the CIM Definition Standards, where in most circumstances the economically mineable part of Indicated mineral resources can become Probable mineral reserves and the economically mineable part of Measured mineral resources can become Proven mineral reserves, as long as all modifying factors are satisfied and that, at the time of reporting, extraction could reasonably be justified.

75 2017 INKAI OPERATION TECHNICAL REPORT

In areas of Probable reserves where the confidence on some characteristics of the mineralization, such as grade continuity and hydrological conditions, can be increased, additional delineation drilling is recommended.

15.2.6 Cut-off

A cut-off for the mineral reserves of 0.13 m%U₃O₈ is applied on the estimated GT value for each block of the mineral resources model. The cut-off is determined with consideration to: a) uranium price, b) wellfield development and operating costs defined by depth, acid consumption, wellfield pattern layouts, metallurgical recovery, c) pregnant lixiviant processing costs, and d) reclamation costs as well as other relevant factors.

15.2.7 Mineral reserve estimate

A summary of the estimated mineral reserves for Inkai with an effective date of December 31, 2016 is shown in Table 15-1. Cameco’s share of uranium in the mineral reserves table below is based on its interest in planned production (57.5%) assuming an annual production rate of 5.2 million pounds of U₃O₈, which differs from its ownership interest (60%) in JV Inkai.

76 2017 INKAI OPERATION TECHNICAL REPORT

TABLE 15-1 : SUMMARY OF MINERAL RESERVES – DECEMBER 31, 2016

Category	Area	Total tonnes (x 1,000)		Grade % U3O8		Total M Lbs U3O8		Cameco’s share M Lbs  U3O8
PROVEN	Block 1		11,170		0.076		18.8		10.8
	Block 2		22,023		0.061		29.8		17.1
	Total Proven		33,193		0.066		48.6		28.0
PROBABLE	Block 1		2,425		0.069		3.7		2.1
	Block 2		28,292		0.045		28.3		16.3
	Total Probable		30,717		0.047		32.0		18.4
TOTAL RESERVES	Inkai		63,910		0.057		80.6		46.3

Notes:	(1)    Cameco reports mineral reserves and mineral resources separately. Totals may not add up due to rounding.
	(2)    Total pounds U3O8 are those contained in mineral reserves and are not adjusted for the estimated metallurgical recovery of 85%.
	(2)    Cameco’s share is 57.5% of total mineral reserves.
	(3)    Mineral reserves have been estimated at a grade-thickness cut-off of 0.13 m%U3O8.
	(4)    The geological model used for Inkai involves geological interpretations on section and plan derived from surface drillhole information.
	(5)    Mineral reserves have been estimated with no allowance for dilution, as this is not applicable for ISR mining.
	(6)    Mineral reserves have been estimated based on the use of the ISR extraction method. The production rate is planned for 5.4 million pounds of U3O8 for 2017, then 5.2 million pounds for 2018 to 2028 and then decreasing till 2030.
	(7)    Mineral reserves have been estimated with the grade-thickness method using two-dimensional block models.
	(8)    An average price of $51 (US) per pound of U3O8 was used to estimate the mineral reserves with exchange rates of $1.00 US=$1.20 to $1.25 Cdn and 245 Kazakhstan Tenge to $1.00 Cdn.
	(9)    There are no known mining, metallurgical, infrastructure, permitting or other relevant factors that could materially affect the above estimate of mineral reserves other than changes resulting from closing of the Implementation Agreement.

15.2.8 Changes to mineral reserves

The differences in Cameco’s share of the pounds of U₃O₈ between the 2016 and the 2015 year-end mineral reserve estimates show an increase in proven reserves of 26.7 million pounds and a decrease in probable of 23.5 million pounds mainly due to:

• revised mineral resources and reserves classification having the C1 and C2 categories, which are included in the mine plan, now equivalent to proven and probable, respectively

• the production plan now assumes production of 5.4 million pounds of U₃O₈ for 2017, then 5.2 million pounds per year for 2018 to 2028 and then decreasing till 2030, with more Indicated resources available for conversion to mineral reserves than previously.

The mineral reserve classification is based on the CIM Definition Standards with criteria laid out in Section

77 2017 INKAI OPERATION TECHNICAL REPORT

14.2 Key assumptions, parameters and methods. A summary of the changes in mineral reserves is shown in Table 15-2.

TABLE 15-2: CHANGES IN MINERAL RESERVES

	Year-end 2015						Year-end 2016						Changes
Category	Total tonnes (x 1,000)		Grade % U3O8		Total M Lbs U3O8		Total tonnes (x 1,000)		Grade % U3O8		Total M Lbs U3O8		Total M Lbs U3O8		Cameco’s Share M Lbs U3O8
Proven		1,140		0.084		2.1		33,193		0.066		48.6		+ 46.5		+ 26.7
Probable		50,476		0.065		72.9		30,717		0.047		32.0		- 40.9		- 23.5
Total Proven and Probable		51,616		0.066		75.0		63,910		0.057		80.6		+ 5.6		+ 3.2

Notes:	(1)    Cameco reports mineral reserves and mineral resources separately. Totals may not add up due to rounding.
	(2)    Cameco’s share is 57.5% of total mineral reserves.

15.3 Factors that could materially affect the mineral reserve estimate

The extent to which the estimate of mineral reserves may be materially affected by mining, metallurgical, infrastructure, permitting and other relevant factors could also vary from material gains to material losses. The QPs responsible for the mineral reserve estimate are not aware of any relevant factors that could materially affect Inkai’s mineral reserve estimate other than changes resulting from closing of the Implementation Agreement (see Section 24.3 2016 Implementation Agreement).

78 2017 INKAI OPERATION TECHNICAL REPORT

16 Mining methods

16.1 Mining

ISR mining at Inkai is comprised of the following components to produce a uranium-bearing lixiviant (an aqueous solution which includes sulphuric acid), which goes to settling ponds and then to the respective IX plant before being directed to the main processing plant (which has a capacity to produce more than 5.2 million pounds of U₃O₈ annually) for production of uranium as yellowcake (see Figure 16-1).

• Determination of the GT cut-off for the initial design and the operating period. The design cut-off sets the lower limit to the pounds per pattern required to warrant installation of a pattern before funds are committed, and the operating cut-off applies to individual producer wells and dictates the lower limit of operation once a well has entered production.

• Preparation of a production sequence which will deliver the uranium-bearing lixiviant to meet production requirements, considering the rate of wellfield uranium recovery, lixiviant uranium head grades, and wellfield flow rates.

• Wellfield development practices using an optimal pattern design to distribute barren lixiviant to the wellfield injectors, and to then collect lixiviant, which carries the dissolved uranium, back to the main processing plant or satellite plant, as the case may be.

The above factors are used to estimate the number of operating wellfields, wellfield patterns and header houses over the production life. They also determine the unit cost of each of the mining components required to realize the production schedule, including drilling, wellfield installation and wellfield operation.

FIGURE 16-1: IN-SITU RECOVERY SCHEMATIC

ISL MINING SULFURIC acid Acidic In Situ Leaching of Uranium in Kazakhstan Acid content distribution unit SOLL Loamy aonds Clays and Crystalline rocks - upper confining layers Productive stratum - watery sancts. uranium mineralization Pregnant solution Likivant F - flow rata P- pressure radiohannel of remote control Clays and Crystalline rocks - lowor confining layers

(Source: Kazatomprom, 2014)

79 2017 INKAI OPERATION TECHNICAL REPORT

16.1.1 Mining method

ISR mining of uranium is defined by the International Atomic Energy Agency as:

“The extraction of ore from a host sandstone by chemical solutions and the recovery of uranium at the surface. ISR extraction is conducted by injecting a suitable leach solution into the ore zone below the water table; oxidizing, complexing and mobilizing the uranium; recovering the pregnant solutions through production wells; and finally, pumping the uranium bearing solution to the surface for further processing.”

Two basic types of leaching systems are used in the world today, acid leach and alkaline leach. In an acid leach system, diluted sulphuric acid is normally used as the complexing agent and to generate an oxidant from iron in the deposit. In an alkaline system, bicarbonate, either as a direct addition or as liberated from the reaction of carbon dioxide and carbonates in the formation, is used as the complexing agent. Oxygen is added in some cases when there is low carbonate in the formation.

According to IAEA technical document-1239, “Manual of Acid In Situ Leach Uranium Mining Technology,” dated August 2001, acid leach has the following technical advantages over alkaline leach:

• a high degree of uranium recovery from the ore (70 – 90%)

• favourable leach kinetics

• a comparatively short leaching period of two to five years

• limited seepage beyond the wellfield due to the formation of low permeable chemical precipitates that block flow

• addition of oxidants is not necessary (if iron is present)

• possibility of self-restoration (or self-attenuation) of the remaining leach solution due to self-cleaning of the contaminated solutions through the adjacent barren rocks

The manual also lists the disadvantage compared to an alkaline leach:

• acid consumption in carbonate-bearing ores can be high, increasing chemical costs and making the process uneconomical

• the risk of pore plugging (blocking the formation with gas or chemical precipitate)

• increased concentrations of dissolved solids

• use of corrosion resistant equipment, increasing the up-front capital cost

Leaching at Inkai is done at a pH between 1 and 2. The use of IX for recovery of uranium from leach solutions is based on the existence of uranyl sulphate complexes (Section 17.2 Ion exchange resin adsorption (loading)).

16.1.2 Production objectives

The annual production specification is 5.2 million pounds of U₃O₈, derived from a combined flow of 2,840 cubic metres per hour (12,500 gallons per minute). By calculation, this implies an average head grade of 100 parts per million of uranium delivered to the IX columns. Therefore, the rate of installation of new patterns, coupled with appropriate wellfield management and consideration of depletion of mineral reserves, must be balanced to provide the requisite IX feed.

While considerable variation exists within the flow capacity of any production well, combined statistics indicate that patterns yield between eight and 10.5 cubic metres per hour. Assuming the average, approximately 278 patterns will need to be operating at any one time to provide flow to the IX circuits.

Actual production results from Blocks 1 and 2, are shown by the recovery curves for their respective wellfields on Figures 16-2 and 16-3. The recovery curve graphs show the relationship between the liquid to solid ratio

80 2017 INKAI OPERATION TECHNICAL REPORT

(L/S) to the recovery expressed in percent. L/S is defined as the ratio between the volume of the leaching solution to the rock mass in the leaching zone of the wellfields. The graphs indicate that, in agreement with Kazakhstan mining regulations, on average uranium recovery of 85% is achievable.

16.1.3 Wellfield design and development

With any mining method, there is a fundamental unit of production that is the basis for all design and scheduling. For an open pit operation, this unit would be a blast pattern, while for underground mining, it would be a stope. For ISR mining, the basic unit is a ‘pattern’ with a production well (also called an extractor) and its associated injector wells.

The pattern drives mine operation at a number of levels. At the design level, the pattern governs the economics. A pattern that is economic must cover the cost of well installation, connection of the wells to a piping system to carry the lixiviant to and from the IX plant, the operating cost of the chemicals needed to leach the uranium, the operating cost of the pumps and maintenance on the pumps, the down-stream plant costs (elution, precipitation, filtering and drying), post-processing costs, and administrative overhead. Any pattern that cannot demonstrate an economic benefit should not be installed unless there is some compelling reason to do so.

For long-range planning purposes, scheduling assumes that the average flow from past production will apply the future. While not strictly true, (the flow is a function of screened length and local permeability, among numerous other factors), the approximation is sufficient for predicting the behaviour of large numbers of patterns.

There are a number of approaches to ISR mining and, as with any mining technique, there is a substantial degree of customization applied, depending on the local conditions. Factors affecting the design of the pattern are numerous, including:

• permeability of the host sands

• depth of the host sands

• cost of drilling

• thickness of mineralized unit

• surface topography

• target wellfield uranium recovery.

Where there are no historical operations to use as a baseline, extensive hydrological modeling may be required. This is not the case with Inkai, as there has been significant experience since at least 1988 with the original test mine on Block 1 and commercial production starting in 2009.

81 2017 INKAI OPERATION TECHNICAL REPORT

FIGURE 16-2: RECOVERY CURVES FOR BLOCK 1 WELLFIELDS

Recovery,% L/S VS RECOVERY, BLOCK 1 WELLFIELDS 6 8-0 8-1 8-2 10 12 14 16 16-1 16-2 18 20 22 24 26 26-1 28 30 32 34 100 90 80 70 60 50 40 30 20 10 0 1 2 3 4 5 LIQUID TO SOLID RATIO (L/S), 1000 M3 PER 1 TONNE OF ROCKMASS

(Source: Cameco, 2016)

FIGURE 16-3: RECOVERY CURVES FOR BLOCK 2 WELLFIELDS

Recovery, % L/S VS RECOVERY, BLOCK 2 WELLFIELDS 110 100 90 80 70 60 50 40 30 20 10 0 1 2 -3 5 -7 9 11 13 15 17 19 19-2 21 23 25 29 31 33 35 37 39 -41 43 -49 51 53 55 55-1 67 69 75 159 -161 -163 -165 12 3 4 LIQUID TO SOLID RATIO (L/S), 1000 M3 PER 1 TONNE OF ROCKMASS

(Source: Cameco, 2016)

82 2017 INKAI OPERATION TECHNICAL REPORT

16.1.4 Wellfield production

Currently, all wellfields utilize hexagonal or line-drive patterns. For 2016, the average flowrate for Block 1 was about 950 cubic metres per hour at a composite average head grade of approximately 100 milligrams U₃O₈ per litre. This material is captured on IX resins at the main processing plant.

At Block 2, during 2016 the average flowrate was about 1,400 cubic metres per hour at an average composite head grade of 125 milligrams U₃O₈ per litre. This material is captured on IX resins at the Block 2 satellite plant.

Additional wellfields are in various stages of development in Block 1 and in Block 2 to provide additional production as required to meet production targets in 2017 and beyond.

At Block 3, four wellfields are in pilot test operation. During 2016, the average flowrate was about 320 cubic metres per hour at an average composite head grade of 55 milligrams U₃O₈ per litre. This material is captured on IX resins at the Block 3 satellite.

Table 16-1 and Figure 16-4 show the production schedule summary for Inkai from 2017 to 2030.

83 2017 INKAI OPERATION TECHNICAL REPORT

TABLE 16-1: PRODUCTION SCHEDULE

Year	2017		2018		2019		2020		2021		2022		2023		2024		2025		2026		2027		2028		2029		2030		Total
Production (M Lbs U3O8)
JV Inkai		5.4		5.2		5.2		5.2		5.2		5.2		5.2		5.2		5.2		5.2		5.2		5.2		3.9		2.0		68.5
Cameco’s share		3.1		3.0		3.0		3.0		3.0		3.0		3.0		3.0		3.0		3.0		3.0		3.0		2.3		1.2		39.6

FIGURE 16-4: ANNUAL PRODUCTION PLAN – 100% BASIS

Million Pounds U3O8 Produced 6.00 5.00 c 4.00 3.00 2.00 0.0 0.00 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 Year

(Source: Cameco, 2016)

84 2017 INKAI OPERATION TECHNICAL REPORT

17 Recovery methods

17.1 Processing facilities

There are three surface processing facilities at Inkai:

• main processing plant (MPP) located on Block 1

• satellite 1 (Sat1) located on Block 2

• test leach facility (TLF) located on Block 3.

The processing equipment in the MPP circuit includes IX units (adsorption and elution columns), along with yellowcake precipitation, thickening, drying and packaging process units. The processing equipment at both Sat1 and TLF consists of adsorption and elution equipment. This is illustrated in the block flowsheet in Figure 17-1. MPP generates a dried yellowcake product from the Block 1, 2, and 3 pregnant solutions. A limited amount of Block 1 and 2 uranium, as precipitated slurry, is transported to an external processing facility. Periodically, when there is a shortage in drying capacity, Block 1 and 2 eluate is shipped to a toll mill for processing.

Loaded IX resin is produced at MPP from Block 1 pregnant solution. This loaded resin can be eluted and processed into yellowcake at MPP or transported and eluted at Sat1. The resulting eluate is transported from Sat1 to MPP and is converted into yellowcake.

Loaded IX resin is produced at Sat1 from Block 2 pregnant solution. This loaded resin can be eluated at Sat1 and the eluate is then transported to MPP and converted to yellowcake. Alternatively, the loaded resin can be transported to MPP for elution and converted into yellowcake.

The following capacity estimates are based on periods when higher head grades have been attained during production in the specific block. The main processing plant has an IX capacity of 2.7 million pounds of U₃O₈ per year and a product recovery drying and packaging capacity of 8.1 million pounds of U₃O₈ per year. Sat1 has a nameplate IX capacity of 6.3 million pounds of U₃O₈ per year.

Loaded IX resin is produced at TLF from Block 3 pregnant solution. This loaded resin is eluted at TLF. The resulting eluate is transported to MPP and converted into yellowcake.

A more detailed description of the process details is provided in the remainder of this section.

17.2 Ion exchange resin adsorption (loading)

Wellfield acid solution, containing the solubilised uranium (pregnant solution), is pumped from the selected wellfield(s) via pipelines to a settling pond and then to the IX circuits for adsorption of the contained uranium. The use of IX for recovery of uranium from leach solutions is based on the existence of uranyl sulphate complexes. The uranyl sulphate anions are selectively but reversibly adsorbed onto solid synthetic IX resin beads with fixed ionic sites. The resin bed is retained in IX vessels where resin is contacted with pregnant solution.

Once the resin in an IX column is fully loaded with uranium, the column is isolated from the continuous IX circuit and the resin is retained for elution or transferred with push water to an elution vessel. In the case of the MPP, the pregnant solution can be directed to one of the adsorption column trains. Each train is capable of performing resin adsorption and then be operated in the desired mode of elution. In the case of the Sat1, the pregnant solution reports to either an adsorption column train or a semi-batch adsorption column. In the case of TLF, pregnant solution reports to a semi-batch adsorption column.

17.3 Resin elution (stripping)

In the elution process, uranium that has been adsorbed onto the IX resin during the adsorption cycle (loaded resin) is desorbed from the resin using ammonium nitrate and sulphuric acid. The eluate produced from this

85 2017 INKAI OPERATION TECHNICAL REPORT

step is stored in pregnant eluate tanks.

At MPP and Sat1, loaded resin can either be retained in the vessel for elution or hydraulically conveyed to a vessel specifically designed for elution within the circuit. Loaded resin can also be transferred between the two plants for elution based on available elution capacity. At the TLF, loaded resin is hydraulically transferred from the adsorption vessel to an elution vessel for elution.

17.4 Denitrification

After the uranium has been stripped from the resin in the elution process, the resin is initially left in a nitrate form. The resin must be denitrified and converted to a sulphate form for re-use in the IX circuit. Denitrification is accomplished by contacting the resin with a solution of sulphuric acid and process water in a denitrification vessel. Each plant has a denitrification vessel to complete this step.

17.5 Precipitation

Pregnant eluate tanks are sampled for uranium content before they are directed to the precipitation circuit. Hydrogen peroxide is added to the precipitation tanks to induce precipitation. The pH of this stream is adjusted in the precipitation tank by the addition of anhydrous ammonia.

The precipitation tanks are operated in a cascade configuration to allow the required retention time for the precipitation reaction to proceed to completion. The final yellowcake slurry is discharged from the last tank in the series and pumped into a thickener.

17.6 Yellowcake product thickening and dewatering

The precipitated slurry from the precipitation circuit flows into a thickener. The contained yellowcake slurry is thickened and is pumped to filter presses.

17.7 Filter press operation

The yellowcake slurry from the yellowcake thickener underflow reports to the filter presses. The slurry is first washed and then dewatered in the filter presses.

17.8 Drying

The dewatered yellowcake from the filter press is then pumped into rotary vacuum dryers where the finished yellowcake product is produced.

The vacuum dryers are totally enclosed during the drying cycle to assure zero emissions. The off-gases and steam generated during the drying cycle are filtered and condensed to collect entrained particulates and moisture within the process system.

17.9 Packaging

Once the dryer contents have cooled, a measured amount of dried yellowcake is transferred through a rotary valve to a drum. The drums are collected into lots before being shipped.

17.10 Overall uranium recovery

The uranium extraction efficiency (recoverability) of ISR operation is determined by uranium loss in underground leaching and in surface production facilities. In 2016, the uranium recovery from wellfield pregnant solutions at the Inkai surface production facilities was 98%. The overall uranium recovery, or metallurgical recovery, is 85%. It is expected that the metallurgical recovery will remain at this level for the current life of mine plan.

86 2017 INKAI OPERATION TECHNICAL REPORT

FIGURE 17-1: FLOWSHEET BASED ON ANNUAL PRODUCTION OF 5.2 MLBS U308

Barren Solution Sand Pond Wellfields Activities at MPP, Sat 1, TLF Pregnant Solution Sand Pond Resin Adsorption Loaded Resin Wash Resin Elution Denitrification Activities at MPP Yellowcake Precipitation Yellowcake solid/liquid separation Yellowcake drying aqueous solution resin Packaging

(Source: Cameco, 2016)

87 2017 INKAI OPERATION TECHNICAL REPORT

18 Project infrastructure

Inkai is a developed producing property with sufficient surface rights, site facilities and infrastructure to meet its current and future mining operation needs for the current mineral reserves. A site plan of the existing infrastructure general arrangement is shown in Figure 18-1.

JV INKAI FACILITIES IN TAIKONUR

• camp for 429 employees, with catering and leisure facilities

• perimeter fence for security

• space for recreation activities

BLOCK 1

• main processing plant - MPP

• administrative office, engineering and construction offices, shops and garage

• holding ponds and reagent storage tanks

• waste disposal enclosures for low-level radioactive waste and domestic waste

• laboratory and emergency response building (staffed at all times by fire services personnel)

• food services facility

• roads and power lines

• wellfield pipelines and header houses

BLOCK 2

• satellite processing plant – Sat1

• office and shops

• holding ponds and reagent storage tanks

• food services facility

• roads and power lines

• wellfield pipelines and header houses

BLOCK 3

• test leach facility - TLF

• office and shops

• holding ponds and reagent storage tanks

• food services facility

• roads and power lines

• wellfield pipelines and header houses

88 2017 INKAI OPERATION TECHNICAL REPORT

FIGURE 18-1: INFRASTRUCTURE GENERAL ARRANGEMENT

N Inkuduk wellfield Block 3 TLF Mynkuduk wellfield Block 1 MPP Block 2 Sat1 Trunk line Trunk line (project) Acid line Acid line (project) Power transmission line (PTL) Power transmission line (project) Road Road (project) Existing wellfields Designed wellfields S00 0 500 1000 1500 2000 2500

(Source: JV Inkai, 2016)

89 2017 INKAI OPERATION TECHNICAL REPORT

19 Market studies and contracts

19.1 Markets

Overview

Nuclear plants around the world use uranium to generate electricity. The following is an overview of the uranium market.

Uranium demand

The demand for U₃O₈ is directly linked to the level of electricity generated by nuclear power plants. World uranium consumption has increased from approximately 75 million pounds of U₃O₈ in 1980 to about 160 million pounds in 2016.

Uranium supply

There are two sources of uranium supply: primary production is production from mines that are currently in commercial operation; and secondary supply includes other sources such as excess inventories, uranium made available from defence stockpiles and the decommissioning of nuclear weapons, re-enriched depleted uranium tails, and used reactor fuel that has been reprocessed.

Mine production

While the uranium production industry is international in scope, there are only a small number of companies operating in relatively few countries. In 2016, world mine production was estimated at 163 million pounds U₃O₈.

In 2016, almost 80% of estimated world production was sourced from four countries, and over 60% of world mine production was attributable to four companies. The 2016 world production estimated by Cameco is shown in the table below.

TABLE 19-1: 2016 WORLD URANIUM PRODUCTION

Country	M lbs U3 O8		% of World
Kazakhstan		63		39	%
Canada		36		22	%
Australia		17		10	%
Niger		11		7	%
Namibia		9		5	%
Russia		8		5	%
Uzbekistan		6		4	%
China		4		3	%
Ukraine		3		2	%
Others*		6		4	%
Total		163		100	%

Producer	M lbs U3 O8		% of World
Kazatomprom		31		19	%
Cameco		27		17	%
AREVA		23		14	%
ARMZ/Uranium One		20		12	%
Rio Tinto		9		6	%
CNNC/CGN		9		5	%
BHP Billiton		8		5	%
Navoi Mining		6		4	%
Paladin Energy		3		2	%
Others		27		16	%
Total		163		100	%

Uranium markets and prices

Uranium is not traded in meaningful quantities on a commodity exchange. Utilities buy the majority of their uranium products under long-term contracts with suppliers and meet the rest of their needs on the spot market.

Cameco sells uranium to nuclear utilities in Argentina, Belgium, Canada, China, Finland, France, Germany, India, Japan, Romania, South Korea, Sweden and the United States. In 2016, 50% of Cameco’s U₃O₈ sales were to five customers.

90 2017 INKAI OPERATION TECHNICAL REPORT

Cameco currently has commitments to supply approximately 150 million pounds of U₃O₈ under long-term contracts with 40 customers worldwide. Cameco’s five largest customers account for 52% of future commitments, and 36% of Cameco’s committed sales volume is attributed to purchasers in the Americas (United States, Canada and Latin America), 44% in Asia and 20% in Europe.

Uranium spot market

The industry average spot price (TradeTech and UxC) on December 31, 2016 was $20.25 (US) per pound of U₃O₈, down 41% from $34.23 (US) per pound of U₃O₈ at the end of 2015.

Long-term uranium market

The industry average long-term price (TradeTech and UxC) on December 31, 2016 was $30.00 (US) per pound of U₃O₈, down 32% from $44.00 (US) per pound of U₃O₈ on December 31, 2015.

Cameco Market Studies and Analyses

Cameco prepares a uranium supply and demand forecast which reflects its view of supply from all known sources as well as demand from all of the existing and planned reactors in the world. Cameco maintains detailed models tracking supplies by source – production as well as secondary supplies – and demand by reactor. In the preparation of this forecast, Cameco reviews detailed supply and demand models published by industry, such as the World Nuclear Association, tracks public announcements about supplies and reactors, then applies its own expertise and develops a forecast.

The qualified persons for Sections 14 Mineral resource estimates and 15 Mineral reserve estimates have reviewed the studies and analyses underlying Cameco’s uranium supply and demand forecast and confirm that the results of these studies and analyses support the assumptions used for the portions of the technical report such qualified persons are responsible for.

19.2 Uranium sales contracts

There are annual uranium sales contracts entered into between JV Inkai and a Cameco subsidiary to purchase Cameco’s share of Inkai production for each year, as well as similar contracts between JV Inkai and Kazatomprom. JV Inkai currently has no other forward-sales commitments for its uranium production.

In accordance with the Kazakhstan government’s resolution on uranium concentrate pricing regulations (effective February 3, 2011), product is currently purchased from JV Inkai at a price equal to the uranium spot price, less a 5% discount (maximum allowable).

19.3 Material contracts

There are no contracts material to Cameco required for the development and operation of Inkai other than the Resource Use Contract. Please see Section 4.4 Resource Use Contract for a description of this contract.

91 2017 INKAI OPERATION TECHNICAL REPORT

20 Environmental studies, permitting and social or community impact

20.1 Environmental considerations

20.1.1 Legislation

In Kazakhstan, government agencies are responsible for the administration of, among other things, uranium production, transportation and storage. The primary regulatory authorities that issue permits/licences/approvals are the Ministry of Investments and Development (Industrial Development and Industrial Safety Committee) and the Ministry of Energy (Committee of Environmental Regulation and Control).

At a regional level, both ministries provide enforcement through local representative authorities. In particular, the Ministry of Energy’s local representative authorities administer approvals of environmental protection programs, costs for environmental protection and enhancement, and approval for waste management programs. Local executive authorities supervise and control development and implementation of environmental protection and subsoil use programs, and are responsible for granting approval for the construction of facilities.

The Ecological Code is the principal legislation dealing with the protection of the environment. Although it does not specifically refer to uranium, there are general provisions regulating production waste which apply to uranium. More specific provisions are provided in other applicable Kazakhstan regulations and state standards.

The environmental management system at JV Inkai is designed to ensure compliance with regulatory requirements, preventing pollution in accordance with ISR operation best practice, and continual improvement of performance. The environmental management system and the occupational health and safety management systems have been certified to ISO 14001 and OHSAS 18001 since 2006 (certificates renewed in 2015).

The principal legislation governing subsoil exploration and mining activity in Kazakhstan is the Subsoil Law. In general, the Subsoil Law identifies the subsoil and mineral resources in the underground state as property of the Republic of Kazakhstan, and resources brought to the surface as property of the subsoil user, unless otherwise provided by contract or this law. See Section 4.5 Subsoil Law for more information on the Subsoil Law and Section 4.6 Draft Subsoil Code for information on the Draft Subsoil Code.

20.1.2 Permitting

JV Inkai is required to hold certain permits and licences to operate the mine, as it is a nuclear facility. With regard to environmental protection requirements, JV Inkai has applied for and received:

• a permit for environmental emissions and discharges for the operation valid till December 2022

• water use permits with various expiry dates

JV Inkai currently holds the following additional material licences relating to its mining activities:

• “Licence for radioactive substances handling” valid till January 23, 2020

• “Licence for operation of mining production and mineral raw material processing” with indefinite term

• “Licence for transportation of radioactive substances within the territory of the Republic of Kazakhstan” valid till January 23, 2020

• “Licence for radioactive waste handling” valid till January 23, 2020

In accordance with applicable legislation regulating permits and licences, JV Inkai is required to submit annual reports to relevant state authorities. In particular, renewal of environmental permits requires the submission of an annual report on pollution levels to Kazakhstan’s environmental authorities, compliance with the permits’ provisions and the payment of any environmental payment obligations not in the nature of payments in

92 2017 INKAI OPERATION TECHNICAL REPORT

respect of violations.

JV Inkai received a mining licence for Block 1 and an exploration with subsequent mining licence for Blocks 2 and 3 from the Kazakhstan government in April 1999. The Resource Use Contract between JV Inkai and the Republic of Kazakhstan was signed in 2000. For more information, see Sections 4.2 Exploration and mining licences, 4.3 Surface tenure, 4.4 Resource Use Contract and 4.5.5 Work programs and project documentation.

As is typical with any mineral extraction site, construction, operation, and reclamation are subject to an ongoing process during which permits, licences, and approvals are requested, monitored and reported on, expire, and are amended or renewed. Provision for these ongoing processes has been included in the cost estimates in this technical report.

20.1.3 Environmental impact assessment

Under the Ecological Code, an environmental impact assessment (EIA) is a mandatory requirement for various types of activities which may have direct or indirect impact on the environment and human health. The Ecological Code does not allow development or implementation of particular business projects (affecting the environment) without an EIA. The Ecological Code requires that an EIA must be conducted at various stages of a project.

Specifically, an EIA must be carried out:

• prior to implementing any type of industrial or construction project

• in respect of feasibility studies for construction, upgrades and reconstruction of buildings, facilities or other industrial infrastructure

• in connection with designs and project documentation for construction of buildings, facilities and infrastructure,

• in connection with the certification of facilities, technologies and materials

• in respect of documentation relating to emissions permits and the treatment of wastes.

Every EIA must be reviewed and approved by a state environmental expert evaluation, which is conducted by the Ministry of Environmental Protection or its territorial departments. Obtaining approvals based on EIAs constitutes prima facie proof that the scope and details of subsoil use operations have been approved by environmental, governmental and other authorities.

Prior to commencing subsoil operations under the Resource Use Contract and obtaining emission and water use permits, JV Inkai had to conduct approved EIAs. The issuance of emission and water use permits by the relevant authorities confirms that JV Inkai conducted approved EIAs as required.

Kazakhstan environmental legislation requires that a state environmental expert examination precede the making of any legal, organizational or economic decisions regarding an operation that may potentially impact public health or the environment. One of the documents the subsoil user must provide in connection with the state environmental expert examination is an environmental impact statement.

The baseline conditions and potential environmental impacts of the commercial mining facility based on Republic of Kazakhstan and western U.S. standards were assessed. The baseline fieldwork was performed in 2001 – 2002. The anticipated environment is common to any uranium acid ISR operation and is described in detail in the EIA and western environmental assessment reports published since 2002. The EIA reports describe the biological, hydro-geological, hydrologic and other physical environmental baseline prior to the introduction of exploration and production operations, and assess the potential impacts to environmental media and the human environment from the proposed operations. The environmental studies completed to date have not identified any potential impacts to human health or the environment that could not be mitigated through permit conditions or reclamation bond commitments. Based on the environmental findings of the EIA studies, the state chose to award two mining licences and the extension of the Block 3 exploration period.

Groundwater flow and plume migration modelling study (Geolink, 2003)

The study presents a critical analysis of hydrogeological data and simulation of contaminant transport. The

93 2017 INKAI OPERATION TECHNICAL REPORT

modelling study predicted groundwater flow and transport within the test area of Block 1. The model was calibrated with recent and historic piezometric measurements. The model results showed no risk to local and regional groundwater users from ISR mining of Block 1.

Natural attenuation study on Block 1 (Volkovgeology, 2005)

The objective of this Volkovgeology (2005) study was to assess natural attenuation of ISR solutions within Block 1, based on the pilot-scale uranium in-situ leaching conducted between 1988 and 1990. To assess and monitor the natural attenuation, four deep boreholes were drilled to depths up to 519 metres into Permian rocks to intersect the mineralized zones within the Mynkuduk aquifer.

Core samples were studied in the field and in the laboratory. Water samples were collected and analyzed. The observed contamination plume was localized within an area of 110 x 80 metres and with a thickness of 32 metres. Laboratory investigations showed attenuation of contaminants (e.g., approximately neutral pH) in the upper part of ISR profile and partial attenuation in the lower part of the profile. In analogy with other uranium ISR sites in the region, the study concluded that the majority of contamination caused by ISR test block 1 will be attenuated in 39 years.

20.1.4 Decommissioning and restoration

Under the Resource Use Contract, JV Inkai must submit a documented plan for decommissioning the property to the government six months before completion of mining activities. A preliminary decommissioning plan has been established for the purposes of estimating total decommissioning costs. The decommissioning plan considers the issues and costs under a “decommission now” scenario. The plan is updated every five years, or as significant changes take place at the operation which would affect the decommissioning estimates. The preliminary decommissioning plan was initially completed in January of 2006, and most recently revised in (2016). On a 100% basis, the estimated decommissioning cost is $10 million (US).

Surface reclamation following the completion of mining will include the removal of all buildings, re-contouring of all disturbed areas of the mine site, and removal of any contaminated material based on a detail post-mining gamma radiation survey. Material exceeding baseline conditions will be removed and replaced with clean material. Contaminated material will be removed to an approved waste facility for permanent disposal.

No active restoration of post-mining groundwater is done in Kazakhstan. Natural attenuation of ion constituents as a passive form of groundwater restoration is determined to be sufficient.

20.1.5 Known environmental liabilities

JV Inkai’s mining activities must comply with the environmental requirements of Kazakhstan laws and regulations. In addition, in the Resource Use Contract, JV Inkai has committed to conduct its operations in accordance with good international mining practices.

The environmental protection legislation in Kazakhstan has evolved rapidly, especially in recent years. As the subsoil use sector has evolved, there is presently a trend towards greater regulation, heightened enforcement and increased liability for non-compliance with respect to environmental issues. The most significant development was the adoption of the Ecological Code in 2007, which replaced the three principal prior laws on environmental protection. Amendments were made to the code in 2011 that include more stringent environmental protection regulations, particularly relating to the control of greenhouse gas emissions, obtaining environmental permits, state monitoring requirements and other similar matters.

Both under the prior and the existing legislative regime, a subsoil user, such as JV Inkai, is obliged to comply with environmental requirements during all stages of a subsoil use operation. Kazakhstan environmental legislation requires that a state environmental expert examination precede the making of any legal, organisational or economic decisions with respect to an operation that could impact the environment and public health. One of the documents that the subsoil user must provide in connection with the state environmental expert examination is an EIA.

The Ecological Code requires that the subsoil user obtain environmental permits to conduct its operations. A permit certifies the holder’s right to discharge emissions into the environment, provided that it introduces the

94 2017 INKAI OPERATION TECHNICAL REPORT

“best available technologies” and complies with specific technical guidelines for emissions as set forth by the environmental legislation. Government authorities and the courts enforce compliance with these permits and violations may result in civil, administrative and/or criminal liability, the curtailment or cessation of operations, orders to pay compensation, orders to remedy the effects of violations and orders to take preventative steps against possible future violations. In certain situations, the issuing authority may modify, renew, suspend or revoke the permits. JV Inkai has applied for and received a permit for environmental emissions and discharges for the operation that is valid until December 31, 2022.

Pursuant to the Water Code, JV Inkai is qualified as a primary water user, and is entitled to extract water directly from water sources for its own use. JV Inkai has obtained special water use permits, which have various expiry dates. Water usage under the permits is limited to the purposes defined in the permits.

As an industrial company, JV Inkai is also required to undertake programs to reduce, control or eliminate various types of pollution and to protect natural resources. The Resource Use Contract specifically requires the implementation of environmental controls based on an industrial environmental control program developed by JV Inkai and which is to be approved by the environmental protection authorities. JV Inkai must also actively monitor specific air emission levels, ambient air quality, nearby surface water quality, groundwater quality, levels of contaminants in soil and the creation of solid waste. It must also submit annual reports on pollution levels to Kazakhstan’s environmental, tax and statistics authorities. The authorities conduct tests to validate JV Inkai’s results.

If JV Inkai’s emissions were to exceed the specified levels, this would trigger additional payment obligations. Moreover, in the course of, or as a result of, an environmental investigation, regulatory authorities in Kazakhstan have the power to issue an order reducing or halting production at a facility that has violated environmental standards.

The Ecological Code and the Resource Use Contract set out requirements with respect to environmental insurance. Legal entities carrying out environmentally hazardous activities are required to obtain insurance to cover these activities, in addition to the civil liability insurance which must be held by owners of facilities, the activities of which may cause harm to third parties. JV Inkai currently maintains both the required environmental insurance and the civil liability insurance.

JV Inkai is subject to decommissioning obligations which are largely defined by the Resource Use Contract. JV Inkai has established a separate bank account and has made the required contributions to the account as security for decommissioning Inkai. Contributions are set as a fraction of gross revenue and are capped at $500,000 (US). The account has been fully funded by JV Inkai in this amount. On a 100% basis, the estimated decommissioning cost is $10 million (US).

The Parliament of Kazakhstan ratified the country’s accession to the United Nations Framework Convention on Climate Changes (Kyoto Protocol) in 2009. The Kyoto Protocol’s objective is to limit or capture emissions of greenhouse gases such as carbon dioxide and methane. Within the framework of the Kyoto Protocol, Kazakhstan has enacted a number of legislative instruments aiming to reduce emissions of the greenhouse gases. In particular, the emission regulations and trading provisions were introduced into the Environmental Code. However, application of the regulations and the issued quotes was postponed until January 1, 2018 and currently, natural resources users are only required to report emission volumes by April 1 of the year following the reporting year without purchasing the quotas.

20.2 Social and community factors

JV Inkai operates in the Suzak district of the South Kazakhstan region. The territory of the district is about 41,000 square kilometres and its population is over 50,000. The town of Taikonur, with a population of about 680, is in this district and the Inkai deposit is located near the village. A major part of Kazakhstan’s uranium reserves are in the district. The district also has deposits of gold, silver, coal and other mineral resources. Meat and dairy products production is a leading agriculture industry in the district.    

In accordance with JV Inkai’s corporate responsibility strategy and to comply with its obligations under the

95 2017 INKAI OPERATION TECHNICAL REPORT

Resource Use Contract, JV Inkai finances projects and provides goods and services to support the district’s social infrastructure.    

Under the Resource Use Contract, JV Inkai is required to finance the training and development of Kazakhstan personnel. The Resource Use Contract imposes local content requirements on JV Inkai with respect to employees, goods, works and services. See Section 4.5.7 Local content requirements for more information.

96 2017 INKAI OPERATION TECHNICAL REPORT

21 Capital and operating costs

The cost estimates in this section are on a 100% basis with a currency exchange rate assumption of 245 Kazakhstan Tenge to $1.00 Cdn. All cost projections are stated in constant 2017 Canadian dollars and assume the throughput from the production schedule outlined in Table 16-1.

21.1 Capital cost estimates

Capital costs for Inkai are estimated to be $296.9 million over the remaining life of the current mineral reserves. The remaining capital costs, as of January 1, 2017, includes $217.3 million for wellfield development, $55.5 million for construction and maintenance and $24.1 million for sustaining capital.

It is assumed that wellfield development costs will gradually decline over the last three years, consistent with the production schedule.

Construction capital is heavily weighted to the first three years due to the major repairs and modernization planned for facilities at both Block 1 and Block 2. Pending closing of the Implementation Agreement, there are no other major construction projects anticipated.

Table 21-1 shows the annual capital cost estimate for Inkai from 2017 to 2030.

21.2 Operating cost estimates

Estimated operating expenditures, excluding taxes and royalties, for ISR mining, surface processing, site administration and corporate overhead for Inkai from 2017 to 2030 are presented in Table 21-2.

Mining costs consist of annual expenditures incurred at Inkai to extract the uranium from the ore zone and pumping the pregnant solution to the surface for further processing.

Surface processing costs are expenditures incurred to turn the pregnant solution from the wellfields into the dried yellowcake product. This includes IX (adsorption and elution), precipitation, thickening, drying, and packaging circuits.

Site administration costs consist of general maintenance, health, safety and environment, camp and catering costs, along with charges for additional functions performed at the Taikonur office, such as geology and supply chain management.

Corporate overhead costs consist of the marketing and transportation of the finished product, along with additional charges due to the administration functions at the Shymkent office, such as the finance and legal departments.

Operating costs for Inkai are estimated to be $12.71 per pound of U₃O₈ over the remaining life of the current mineral reserves. The operating cost projections have incorporated the production sequence and pattern design of the wellfields along with past production experience to determine the estimated annual expenditures. The operating costs have decreased from the March 31, 2010 technical report as a result of the optimization in the consumption of sulphuric acid and other reagents, as well as the devaluation of the Kazakhstan Tenge.

97 2017 INKAI OPERATION TECHNICAL REPORT

TABLE 21-1: CAPITAL COST FORECAST BY YEAR – 100% BASIS

Capital costs ($Cdn M)	2017		2018		2019		2020		2021		2022		2023		2024		2025		2026		2027		2028		2029		2030		Total
Total wellfield development	$	20.3	$	15.6	$	15.8	$	19.1	$	17.3	$	14.0	$	15.9	$	16.7	$	17.5	$	16.5	$	17.5	$	13.0	$	10.8	$	7.3	$	217.3
Construction and maintenance capital		4.9		16.3		17.9		1.6		1.6		1.6		1.6		1.6		1.6		1.6		1.6		1.6		1.3		0.7		55.5
Sustaining capital		1.6		1.6		1.7		1.9		1.9		1.9		1.9		1.9		1.9		1.9		1.9		1.9		1.4		0.7		24.1
Total capital costs	$	26.8	$	33.5	$	35.4	$	22.6	$	20.8	$	17.5	$	19.4	$	20.2	$	21.0	$	20.0	$	21.0	$	16.5	$	13.5	$	8.7	$	296.9

TABLE 21-2: OPERATING COST FORECAST BY YEAR – 100% BASIS

Operating costs ($Cdn M)	2017		2018		2019		2020		2021		2022		2023		2024		2025		2026		2027		2028		2029		2030		Total
Site administration	$	14.8	$	14.5	$	18.4	$	18.4	$	18.4	$	18.4	$	18.4	$	18.4	$	18.4	$	18.3	$	18.3	$	18.3	$	13.7	$	7.2	$	233.9
Mining costs		19.5		15.8		25.8		25.9		25.0		25.4		24.4		24.0		22.9		21.8		22.0		21.7		16.9		8.9		300.0
Processing costs		10.3		11.4		11.4		11.4		11.4		11.4		11.4		11.4		11.4		11.4		11.4		11.4		8.6		4.5		148.8
Corporate overhead		14.2		14.5		14.3		14.3		14.3		14.3		14.3		14.3		14.3		14.3		14.3		14.3		10.7		5.6		188.0
Total operating costs	$	58.8	$	56.2	$	69.9	$	70.0	$	69.1	$	69.5	$	68.5	$	68.1	$	67.0	$	65.8	$	66.0	$	65.7	$	49.9	$	26.2	$	870.7
Total operating costs per pound of U3O8	$	10.95	$	10.81	$	13.44	$	13.46	$	13.29	$	13.37	$	13.17	$	13.10	$	12.89	$	12.65	$	12.69	$	12.64	$	12.79	$	12.87	$	12.71

98 2017 INKAI OPERATION TECHNICAL REPORT

22 Economic analysis

This technical report does not include the information required under Section 22 (Economic Analysis) of Form 43-101F1 of NI 43-101, as this technical report does not include a material expansion of Inkai’s current production. Cameco’s economic analysis demonstrates a positive cash flow.

23 Adjacent properties

South Inkai is an ISR mine that began operating in 2009. South Inkai’s land position is contiguous with, and south of, Inkai. It is owned 100% by the Southern Mining and Chemical Company joint venture and operated by the Betpak Dala joint venture, both joint ventures in turn owned by Uranium One Inc. (70% interest) and Kazatomprom (30% interest). The mineralization hosted in the Middle and Lower Inkuduk and in the Mynkuduk extends from the Inkai property onto the South Inkai property. The source of this information, not verified by the QP responsible for this section, is from Uranium One’s “Operating and Financial Review –

Quarter Ended March 31, 2016” and their technical report on South Inkai published in 2014.

99 2017 INKAI OPERATION TECHNICAL REPORT

24 Other relevant data and information

24.1 Block 3 appraisal program

Exploration work on Block 3 has identified extensive mineralization hosted by several horizons in the lower and middle parts of the Upper Cretaceous stratigraphic level and traced along 25 kilometres from Block 2 in the southwest through to the Mynkuduk deposit in the northeast. This discovery requires further assessment of its commercial viability. In 2010, JV Inkai filed a notice of the discovery with regulators. JV Inkai is operating a test mine at Block 3. The exploration period expires July 13, 2018 unless extended.

Approvals

In 2009, Amendment No.2 to the Resource Use Contract was signed, extending the exploration period at Block 3 to July 13, 2010.

In 2011, Amendment No 3 to the Resource Use Contract was signed, giving JV Inkai government approval to carry out a five-year assessment program that included delineation drilling, uranium resource estimation, construction and operation of a TLF and completion of a feasibility study.

In 2012, JV Inkai received regulatory approval for the detailed Block 3 delineation drilling and test leach work programs.

In 2014, JV Inkai applied for a three-year extension to complete the Block 3 evaluation.

In November 2016, Amendment No. 5 to the Resource Use Contract was signed, extending the exploration period at Block 3 until July 13, 2018.

Appraisal Work

Extensive exploration and delineation work was completed at Block 3 by JV Inkai from 2006 to 2016. For more information on drilling at Block 3, see Section 10.2.1 Timeline for exploration-delineation drilling programs. In 2011, JV Inkai began infrastructure development and completed engineering for a TLF for the block 3 assessment program. In addition, a preliminary estimate of the mineralization on the southwestern corner of Block 3 was prepared, which was reviewed and approved by the SRC.

In 2012, JV Inkai started drilling at test wellfields and started construction of the TLF.

In 2013, JV Inkai continued construction of the TLF and test wellfields, and started work on an appraisal of mineral potential according to Republic of Kazakhstan standards.

In 2014, JV Inkai continued construction of the TLF and test wellfields, and advanced work on a preliminary appraisal of the mineral potential according to Republic of Kazakhstan standards. An interim report on exploration results and estimate of the mineralization at Block 3 was conditionally approved by the SRC.

In 2015, JV Inkai completed construction of the TLF and began pilot production from test wellfields, as well as advanced work on a preliminary appraisal of the mineral potential of Block 3. At December 31, 2016, total production from test mining at Block 3 was 865,000 pounds of U₃O₈.

In February 2017, JV Inkai submitted an updated estimate of in-situ uranium mineralization and a TEO report, similar to a preliminary feasibility study, to the SRC for their approval. During 2017, JV Inkai plans to continue with pilot production from the TLF.

See Section 10 Drilling for more information on drilling at Block 3.

24.2 Cameco funding of Block 3 appraisal program

A Cameco subsidiary advanced funds for JV Inkai’s exploration and evaluation work on Block 3 and, as at December 31, 2016, the principal and interest amounted to $168 million (US). Under the loan agreement, JV Inkai is to repay the Cameco subsidiary from the sale of its production. On January 20, 2017, a payment of

100 2017 INKAI OPERATION TECHNICAL REPORT

$30 million (US) was received.

24.3 2016 Implementation Agreement

In 2012, Cameco entered into a memorandum of agreement (2012 MOA) with Kazatomprom setting out a framework to:

• increase Inkai’s annual production from Blocks 1 and 2 to 10.4 million pounds (Cameco’s share 5.2 million pounds) and sustain it at that level

• extend the term of JV Inkai’s resource use contract through 2045.

Cameco, Kazatomprom and JV Inkai signed an agreement (Implementation Agreement) dated May 27, 2016, to restructure and enhance Inkai. Subject to closing, the Implementation Agreement replaces the 2012 MOA and provides as follows:

• JV Inkai will have the right to produce 4,000 tonnes of uranium (tU) (10.4 million pounds of U₃O₈) per year (Cameco’s share 4.2 million pounds), an increase from the current 5.2 million pounds of U₃O₈ (Cameco’s share 3.0 million pounds).

• JV Inkai will have the right to produce from blocks 1, 2 and 3 until 2045 (currently, the licence terms are to 2024 for Block 1 and to 2030 for Blocks 2 and 3)

• subject to further adjustments tied to the construction of a refinery as described below, Cameco’s ownership interest in JV Inkai will be adjusted to 40%, and Kazatomprom’s ownership interest in JV Inkai will be adjusted to 60%. However, the Implementation Agreement ensures that during production ramp up, Cameco’s share of annual production remains at 57.5% on the first 5.2 million pounds. As annual production increases above 5.2 million pounds, Cameco will be entitled to 22.5% of any incremental production, to the maximum annual share of 4.2 million pounds of U₃O₈. Once the ramp up to 10.4 million pounds of U₃O₈ annually is complete, Cameco’s interest in production will be adjusted to match its ownership interest at 40%.

• a governance framework that provides protection for Cameco as a minority owner of JV Inkai

• the current boundaries of Blocks 1, 2 and 3 will be adjusted to match the agreed production profile for JV Inkai to 2045

• the loan made by a Cameco subsidiary to JV Inkai to fund exploration and evaluation of Block 3 will be paid on a priority basis.

The Implementation Agreement is subject to obtaining all required government approvals, including certain amendments to JV Inkai’s existing Resource Use Contract. In February 2017, Cameco estimated it would take 10 to 18 months to obtain them. The government approvals are conditional upon submission of certain technical reports and other documents. The agreement provides for annual production at the Inkai operation to be ramped up to 10.4 million pounds of U₃O₈ over three years following receipt of the required approvals.

The Implementation Agreement also provides that Cameco and Kazatomprom will complete a feasibility study for the purpose of evaluating the design, construction and operation of a uranium refinery in Kazakhstan with the capacity to produce 6,000 tU annually as uranium trioxide (UO₃). The Implementation Agreement includes provisions that would make Cameco’s proprietary uranium refining technology available to Kazatomprom on a royalty-free basis, and grants Kazatomprom a five-year option to license Cameco’s proprietary uranium conversion technology for purposes of constructing and operating a UF₆ conversion facility in Kazakhstan.

If Cameco and Kazatomprom decide to build the refinery, the Implementation Agreement also provides that Cameco’s ownership interest in JV Inkai will be increased to 42.5% upon commissioning of the refinery and, depending on the level of commercial support Cameco provides, may be increased further to 44%.

The Implementation Agreement also grants Kazatomprom a five year option to licence Cameco’s proprietary uranium conversion technology for purposes of constructing and operating a UF₆ conversion facility in

101 2017 INKAI OPERATION TECHNICAL REPORT

Kazakhstan, if Cameco and Kazatomprom decide to build the refinery.

24.4 Currency control regulations

In 2009, specific amendments to existing currency regulations were adopted. These amendments are aimed at preventing possible threats to the economic security and stability of Kazakhstan’s financial system. The President of Kazakhstan was granted the power to establish a special currency regime that can:

• require foreign currency holders to deposit a certain portion of their foreign currency interest free with a resident Kazakhstan bank or the National Bank of Kazakhstan

• require the permission of the National Bank of Kazakhstan for currency transactions

• require the sale of foreign currency received by residents

• restrict overseas transfers of foreign currency.

While the special currency regime has not been imposed, it has the potential to prevent Kazakhstan companies, like JV Inkai, from being able to pay dividends to their shareholders abroad or repatriating any or all of its profits in foreign currency. It can also impose additional administrative procedures, and Kazakhstan companies could be required to hold a portion of their foreign currency in local banks.

Following 2009 Kazakhstan currency control legislation has been liberalized. Changes, although insignificant, have been made with respect to simplification of administration of currency operation and liberalization of the regulatory regime applicable to currency payments by individuals.

In 2015 the National Bank of the Republic of Kazakhstan amended the rules on currency operations in the Republic of Kazakhstan (Rules). The Rules inter alia regulate foreign exchange operations, the regime of foreign investments into Kazakhstan, and cross border and domestic currency payments. Kazakhstan legal entities (with some exceptions) may purchase foreign currency on Kazakhstan’s market in the amount exceeding $100,000 (US) or its equivalent only when such currency is required for fulfillment of a currency contract (e.g. a cross-border sale and purchase agreement) or other documents which confirm the purpose of the purchase. A Kazakhstan bank may sell currency to Kazakhstan legal entities only when an underlying contract is presented to the bank. The previous version of the Rules did not restrict the purchase of foreign currency by Kazakhstan legal entities. Non-resident legal entities, when purchasing or selling the foreign currency through Kazakhstan banks for Tenge, must provide the purpose of such purchase or sale.

A new law, Law on Currency Regulation and Currency Control, has been proposed and could be adopted by the end of 2017. The proposed law envisages substantial changes to Kazakhstan currency control. In particular, the contemplated changes relate to:

• amendments to the definition of Kazakhstan residents

• the sale and purchase of currency by residents in the Kazakhstan market

• requirements applicable to export/import operations with customer clearance in the territory of Kazakhstan.

The Resource Use Contract grants JV Inkai a measure of protection from currency control regulations, granting it the right to freely transfer funds, in state and other currencies, inside and outside Kazakhstan.

24.5 Regulatory risks

24.5.1 Kazakhstan laws and regulations

Most civil relations in the Republic of Kazakhstan are governed principally by the Civil Code of the Republic of Kazakhstan. The Civil Code broadly recognises, inter alia, the rights of foreign companies and citizens to enter into transactions and to own property in Kazakhstan. These rights are established in the Constitution of the Republic of Kazakhstan and may be limited only by those restrictions set forth in the legislation of Kazakhstan.

102 2017 INKAI OPERATION TECHNICAL REPORT

In addition to the Civil Code, there are a number of statutes which are material to JV Inkai’s operations. They include, principally, Subsoil Law, the Law on Limited Liability Partnerships, the Tax Code, the Ecological Code, the Entrepreneurial Code, Law on State Property, the Law on Transfer Pricing, and the Law on Currency Regulation.

The government is developing a new law, the Subsoil Code, to replace the Subsoil Law. The December 2016 draft of the new law does not address licences issued and resource use contracts executed before its enactment. Therefore, the status of JV Inkai’s Resource Use Contract and Licences under the proposed law is unclear. This development reflects increased political risk in Kazakhstan.

Although the Republic of Kazakhstan has well-developed legislation, many provisions are sufficiently vague as to give government officials discretion in their application, interpretation and enforcement. Consequently, laws are subject to changing and different interpretations. This means that even JV Inkai’s best efforts to comply with applicable law may not always result in recognized compliance and that non-compliance may have consequences disproportionate to the violation. The uncertainties in Kazakhstan laws, as well as in their interpretation and application, represent a significant risk for JV Inkai’s current operations and plans to increase production.

In addition, the regulation of business in Kazakhstan continues to be influenced by historical notions of strong governmental control and regulation. This legacy, coupled with state institutions and a judicial system in which many foreign investors still lack confidence, present a challenging environment in which to do business. To maintain and increase Inkai production, ongoing support, agreement and co-operation from Kazatomprom and the Kazakhstan government is required.

The recent worldwide trend of resource nationalism has also been embraced by Kazakhstan in recent years, as previous benefits accorded foreign investors have been whittled away in the subsoil use sector, changes have been negotiated by the government into existing resource use contracts, and new laws granting preferences to the state, state enterprises and domestic concerns have been adopted.

Under Kazakhstan law, the state has the right to nationalize private property by enacting a law on nationalization. As of the date of this technical report, Kazakhstan has not exercised such right but the risk of nationalization of JV Inkai’s property still exists.

JV Inkai’s operations may be affected in varying degrees by government regulations restricting production, price controls, export controls, currency controls, taxes and royalties, expropriation of property, environmental, mining and safety legislation, and annual fees to maintain mineral properties in good standing. There is no assurance that the laws in Kazakhstan protecting foreign investments will not be amended or abolished, or that these existing laws will be enforced or interpreted to provide adequate protection against any or all of the risks described above. There is also no assurance that the Resource Use Contract can be enforced or will provide adequate protection against any or all of the risks described above.

Cameco believes that the risk of operating a mine in Kazakhstan is manageable.

24.5.2 Compliance with legal requirements

Under the Resource Use Contract and Licences, JV Inkai has the rights to explore for and to extract uranium from the subsoil and it owns the uranium extracted from the subsoil. Its ability to conduct these activities, however, depends upon compliance with its obligations under the Resource Use Contract, the Licences and laws of the Republic of Kazakhstan, as well as ongoing support, agreement and co-operation from the government of Kazakhstan.    

The Subsoil Law lists the violations which entitle the Competent Authority to unilateral termination of a resource use contract. For more details please refer to Section 4.4 Resource Use Contract. If JV Inkai or its participants commit any of these violations, there is a risk of JV Inkai losing its subsoil use rights due to unilateral termination by the Competent Authority.

The Subsoil Law provides the state with the right to demand the amendments of the resource use contract if activities of a subsoil user, exploring or developing a strategic deposit, entail such changes in the economic

103 2017 INKAI OPERATION TECHNICAL REPORT

interests of the state that pose a threat to national security. This in turn might entail a risk of diminishment of JV Inkai’s rights. The right to demand amendments might be applied broadly by the state leading to a risk of (i) curtailment of JV Inkai’s rights or (ii) termination of the Resource Use Contract and the Licences. For more details please refer to Section 4.5.4 Contract termination

In its Resource Use Contract, JV Inkai committed to conducting its operations according to good international mining practices. It complies with the environmental requirements of Kazakhstan legislation and regulations, and, as an industrial company, it must also reduce, control or eliminate various kinds of pollution and protect natural resources. Regulatory authorities have the power to issue an order reducing or halting production at a facility that violated environmental standards.

JV Inkai is required to hold, and it does hold, a number of licences and permits (including but not limited to ecological permits) and therefore, must comply with their requirements. Failure to obtain and to comply with the requirements of licences and permits could result in the activities JV Inkai performs under a licence or permit being limited. For example, without an ecological permit, JV Inkai will be unable to conduct subsoil operations.

Generally, other breaches of law and/or contractual obligations may also lead to limitation of the right to use JV Inkai’s property.

24.5.3 2016 Implementation Agreement regulatory approvals

In 2016, Cameco signed the Implementation Agreement with Kazatomprom and JV Inkai to restructure and enhance Inkai. This agreement is subject to obtaining all required government approvals, including amendments to the Resource Use Contract, which in February 2017, Cameco estimated it would take 10 to 18 months to obtain. There is a risk that all required government approvals to close, or give effect to, the contemplated transactions, including approval of the amendments to the Resource Use Contract from government authorities, will not be received or will not be received on a timely basis.

24.5.4 Extension of Block 3 exploration period

In November 2016, Amendment No. 5 to the Resource Use Contract was signed, extending the exploration period at Block 3 until July 13, 2018. There is risk that JV Inkai may not complete the work on the final appraisal of Block 3’s mineral potential prior to July 13, 2018 and a further extension may be required. There is no assurance that a further extension will be granted or what the terms and conditions of such an extension would be. This may result in the loss of Block 3 without compensation for the loss of JV Inkai’s investment. Cameco believes that the risk will be mitigated if the Implementation Agreement closes prior to July 13, 2018.

24.6 Caution about forward-looking information

This technical report includes statements and information about expectations for the future that are not historical facts. When JV Inkai’s plans and the future performance of Inkai, or other things that have not yet taken place, are discussed, these statements are considered to be forward-looking information or forward-looking statements under Canadian and US securities laws. They are referred to in this technical report as forward-looking information.

Key things to understand about the forward-looking information in this technical report:

• It typically includes words and phrases about the future, such as believe, estimate, anticipate, expect, plan, forecast, project, scheduled, strategy and proposed or variations (including negative variations) of such words and phrases or may be identified by statements to the effect that certain actions, events or results, may, could, should, would, will be or shall be taken, occur or be achieved.

• It is based on a number of material assumptions, including those listed below, which may prove to be incorrect.

• Actual results and events may be significantly different from what is currently expected because of the risks associated with JV Inkai, its business, the Inkai deposit and mining in the Republic of Kazakhstan. A number of these material risks are listed below. It is recommended that the reader

104 2017 INKAI OPERATION TECHNICAL REPORT

also reviews other parts of this document, including Section 24.5 Regulatory risks, which outlines a number of regulatory risks, Cameco’s Annual Information Form for the year ended December 31, 2016 under the headings “Caution about forward-looking information” and “Risks that can affect our business” and Cameco’s annual Management’s Discussion and Analysis for the year ended 2016 under the headings “Caution about forward-looking information” and “Uranium Operating Properties – Inkai – Managing our risks,” which include a discussion of other material risks that could cause actual results to differ from current expectations.

Forward-looking information is designed to help the reader understand current views of the qualified persons and management of Cameco. It may not be appropriate for other purposes. Cameco and the qualified persons will not necessarily update this forward-looking information unless required to by securities laws.

Examples of forward-looking information in this technical report

• plans and expectations for Inkai

• estimates of capital, operating and decommissioning costs

• mineral resource and mineral reserve estimates

• forecasts relating to mining, development and other activities including but not limited to mine life and mine production

• Cameco’s February 2017 estimate that it would take 10 to 18 months to obtain all required approvals, including amendments to the Resource Use Contract, to close the Implementation Agreement and the effect of the Implementation Agreement closing

Material assumptions

• there is no material delay or disruption in JV Inkai’s plans due to natural phenomena, delay in acquiring critical equipment, equipment failure or other causes

• there are no labour disputes or shortages

• all necessary contractors, equipment, operating parts and supplies are obtained when they are needed

• regulatory permits and approvals are obtained when they are needed, including to close the Implementation Agreement

• the main processing plant and satellite plant are available and function reliably as designed

• the mineral resource and mineral reserve estimates and the assumptions they are based on are reliable (see Sections 14 Mineral resource estimates and 15 Mineral reserve estimates)

• JV Inkai’s development, mining and production plans for Inkai succeed

• equipment required for mining operates reliably

Material risks

• an unexpected geological, hydrological, or mining condition delays or disrupts production

• the necessary regulatory permits or approvals cannot be obtained or maintained, including to close the Implementation Agreement

• natural phenomena, labour disputes, equipment failure, delay in obtaining the required contractors, equipment, operating parts and supplies or other reasons cause a material delay or disruption in production

• main processing plant and the satellite plant are not available or do not function as designed

• mineral resource and mineral reserve estimates are not reliable

105 2017 INKAI OPERATION TECHNICAL REPORT

• JV Inkai’s development, mining or production plans for Inkai are delayed or do not succeed for any reason

• the risks described in Section 24.5 Regulatory Risks.

106 2017 INKAI OPERATION TECHNICAL REPORT

25 Interpretation and conclusions

Inkai is an ISR mine in the Central Asian Republic of Kazakhstan. It comprises three contiguous licence blocks: Block 1, Block 2 and Block 3. Uranium production is obtained from Blocks 1 and 2. A test leach program is ongoing at Block 3.

Based on the rigorous procedures and experience demonstrated by Volkovgeology, JV Inkai and Cameco personnel, Cameco’s review of the reliability, quality and density of data available, the thorough geological interpretative work, and the different validation tests performed over the years, the QPs responsible for the mineral resource and mineral reserve estimates consider that the current estimates of mineral resources and reserves are relevant and reliable.

From 2009 till end of 2016, JV Inkai produced 36.7 million pounds of U₃O₈ (Cameco’s share of 21.5 million) from Blocks 1 and 2. Cameco believes that Blocks 1 and 2 have the potential to sustain production levels, as outlined in this technical report.

The current technical report supports the sustained production, based on an operating mine life of 13.3 years, producing an estimated 68.5 million pounds of U₃O₈.

Based on exploration and development to date, Cameco and the authors of this report are of the opinion that Block 3 has the potential to support a commercial operation. In November 2016, Amendment No. 5 to the Resource Use Contract was signed, extending the exploration period at Block 3 until July 13, 2018.

If the Implementation Agreement closes, the estimated mineral resources and mineral reserves of Inkai, and Cameco’s share of them, will change materially.

107 2017 INKAI OPERATION TECHNICAL REPORT

26 Recommendations

Given that Inkai is in production, that it has sufficient mineral reserves to produce at the current licensed production rate, and that leach tests on Block 3 are in progress, the authors of this technical report consider that it is not necessary to recommend further exploration activities. In areas of probable reserves where the confidence on some characteristics of the mineralization can be increased, such as grade continuity and hydrological conditions, additional delineation drilling is recommended.

Over the life of the operation and at higher production rates, the accumulation of specific ionic species in the holding ponds could reduce surface equipment performance. It is recommended that the concentration of ionic species be monitored.

The Implementation Agreement provides for annual production at the Inkai operation to be ramped up to 10.4 million pounds of U₃O₈ over three years following receipt of required approvals. It is recommended that technical studies related to the production ramp-up be completed and submitted in a timely manner.

108 2017 INKAI OPERATION TECHNICAL REPORT

27 References

Cameco, JV Inkai Property- Uranium Reserve and Resource Estimate, 2003

CIM, Definition Standards - For Mineral Resources and Mineral Reserves, 2014

CIM, Estimation of Mineral Resources and Mineral Reserves – Best Practice Guidelines, 2003

Council of Ministers of the USSR, Resolution N 1128 on the Approval of the Classification for the Mineral Reserves and Prognosticated Resources of the Solid Minerals, 1981

FGU GKZ and CRISCO, Guidelines on Alignment of Russian minerals reporting standards and the CRIRSCO Template, 2010.

Geolink Consulting, Groundwater Flow and Plume Migration Modeling Study at the Inkai Deposit, Block No. 1, 2003

GKZ (State Reserve Commission of the USSR), Guidelines on the Application of the Mineral Reserve Classification for the Deposits of Radioactive Minerals, 1986

International Atomic Energy Agency, Manual of acid in situ leach uranium mining technology, 2001

KAPE, Environmental Baseline Study of the Inkai Deposit, 2002

KAPE, Environmental Baseline Study on Block 2 of the Inkai Deposit, 2006.

Kazatomprom, Development of Uranium Mining by ISL in Kazakhstan, IAEA Vienna, 2014

KAZRC, Kazakhstan Code for the Public Reporting of Exploration Results, Mineral Resources and Mineral Reserves, 2016

KAZRC, The Guidelines On Alignment Of Minerals Reporting Standards Of The Republic Of Kazakhstan And The CRIRSCO Template, 2016

Kislyakov, Y.M. and Shetochkin, V.N., Hydrogenic Ore Formation, 2000. English translation from Russian by CERCAMS, 2009

NAEN. The NAEN Code for the Public Reporting of Exploration Results, Mineral Resources, Mineral Reserves, 2011

Power Resources Inc., Inkai ISL Uranium Project Feasibility Study Volume 1, November 2003, revised September 2004 and December 2004

SRC (State Reserve Commission of Kazakhstan), Guidelines on the Application of the Mineral Reserve Classification for the Sandstone Uranium Deposits (Amendment to the Guidelines on the Application of the Mineral Reserve Classification for the Deposits of Radioactive Minerals), 2008

SRK Consulting, Inkai In-Situ Leach Uranium Project, 2005

SRK Consulting, Resource Verification – Inkai in-situ Leach, 2007

Two Key, Interim Report on the Results of Exploration and Delineation at the Block 3 (Northern Flank) of the Inkai Deposit with Uranium Resource Estimation in the C1 and C2 Categories, 2014

Volkovgeology, Assessment of Natural Attenuation on Test Block 1 after In-Situ Leaching at the Inkai Deposit, 2005

Volkovgeology, Report of the Expedition No 7 on the First Stage of the Detailed Exploration and Delineation of the Inkai Uranium Deposit for the Period 1979-1991, with Mineral Resource Estimation as of 01.07.1991. Volumes I, II and III, 1991

Volkovgeology, Report on the Results of Exploration and Delineation Block 2 of the Inkai Uranium Deposit over a Period of 1991-2006, 2007

109 2017 INKAI OPERATION TECHNICAL REPORT

Volkovgeology, Technical and Economic Substantiation of Permanent Conditions for Block 2 of the Inkai Uranium Deposit, 2007

Volkovgeology, Laboratory Studies on the Technical Parameters of the Ore - Deposit Inkai, 2011

Volkovgeology, Report of Exploration of Block 3 Inkai Uranium Deposit As of 01.01.2015, Volume 1, Book 4, 2015

110 2017 INKAI OPERATION TECHNICAL REPORT

28 Date and signature page

This NI 43-101 Technical Report titled “Inkai Operation, South Kazakhstan Oblast, Republic of Kazakhstan”, dated March 23, 2017 with an effective date of December 31, 2016 has been prepared under the supervision of the undersigned. The format and content of the report conform to Form 43-101F1 of NI 43-101 of the Canadian Securities Administrators.

“signed and sealed”
Alain G. Mainville, P. Geo.	March 23, 2017
Cameco Corporation	2121 – 11th Street West
	Saskatoon, SK, S7M 1J3
	Canada
“signed”
Darryl Clark, PhD, P. Geo.	March 23, 2017
Cameco Kazakhstan LLP	6 Sary-Arka Street
	Office 920, Arman Business Center
	Astana,
	Kazakhstan 010000
“signed and sealed”
Stuart B. Soliz, P. Geo.	March 23, 2017
Power Resources, Inc. (operating as Cameco Resources)	550 North Poplar, Suite 100 Casper, WY 82601 United States of America
“signed and sealed”
Robert J. Sumner, PhD, P. Eng.	March 23, 2017
Cameco Corporation	2121 – 11th Street West
	Saskatoon, SK, S7M 1J3
	Canada

111 2017 INKAI OPERATION TECHNICAL REPORT